diff options
36 files changed, 1093 insertions, 280 deletions
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 09ad7995080..45d63c98601 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -88,6 +88,7 @@ config PLATFORM_AT32AP select MMU select PERFORMANCE_COUNTERS select HAVE_GPIO_LIB + select GENERIC_ALLOCATOR # # CPU types @@ -147,6 +148,9 @@ config PHYS_OFFSET source "kernel/Kconfig.preempt" +config QUICKLIST + def_bool y + config HAVE_ARCH_BOOTMEM_NODE def_bool n @@ -201,6 +205,11 @@ endmenu menu "Power management options" +source "kernel/power/Kconfig" + +config ARCH_SUSPEND_POSSIBLE + def_bool y + menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index a398be28496..a51bb9fb3c8 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -9,6 +9,8 @@ */ #include <linux/clk.h> #include <linux/etherdevice.h> +#include <linux/irq.h> +#include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/init.h> #include <linux/linkage.h> @@ -25,6 +27,13 @@ #include <asm/arch/init.h> #include <asm/arch/portmux.h> +/* Oscillator frequencies. These are board-specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; @@ -140,6 +149,10 @@ static struct platform_device i2c_gpio_device = { }, }; +static struct i2c_board_info __initdata i2c_info[] = { + /* NOTE: original ATtiny24 firmware is at address 0x0b */ +}; + static int __init atngw100_init(void) { unsigned i; @@ -165,12 +178,28 @@ static int __init atngw100_init(void) } platform_device_register(&ngw_gpio_leds); + /* all these i2c/smbus pins should have external pullups for + * open-drain sharing among all I2C devices. SDA and SCL do; + * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus), + * but it's not available off-board. + */ + at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP); at32_select_gpio(i2c_gpio_data.sda_pin, AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); at32_select_gpio(i2c_gpio_data.scl_pin, AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); platform_device_register(&i2c_gpio_device); + i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); return 0; } postcore_initcall(atngw100_init); + +static int __init atngw100_arch_init(void) +{ + /* set_irq_type() after the arch_initcall for EIC has run, and + * before the I2C subsystem could try using this IRQ. + */ + return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING); +} +arch_initcall(atngw100_arch_init); diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 000eb4220a1..86b363c1c25 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -28,6 +28,12 @@ #include "atstk1000.h" +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; struct eth_addr { u8 addr[6]; @@ -232,7 +238,7 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(1, ð_data[1])); #else at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size); + fbmem_start, fbmem_size, 0); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index a0b223df35a..ea109f435a8 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -27,6 +27,13 @@ #include "atstk1000.h" +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index e765a8652b3..c7236df74d7 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -29,6 +29,13 @@ #include "atstk1000.h" +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, @@ -133,7 +140,7 @@ static int __init atstk1004_init(void) at32_add_device_mci(0); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size); + fbmem_start, fbmem_size, 0); at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM at32_add_device_ssc(0, ATMEL_SSC_TX); diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 5f31702d6b1..2b398cae110 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -74,50 +74,41 @@ exception_vectors: .align 2 bral do_dtlb_modified - /* - * r0 : PGD/PT/PTE - * r1 : Offending address - * r2 : Scratch register - * r3 : Cause (5, 12 or 13) - */ #define tlbmiss_save pushm r0-r3 #define tlbmiss_restore popm r0-r3 - .section .tlbx.ex.text,"ax",@progbits + .org 0x50 .global itlb_miss itlb_miss: tlbmiss_save rjmp tlb_miss_common - .section .tlbr.ex.text,"ax",@progbits + .org 0x60 dtlb_miss_read: tlbmiss_save rjmp tlb_miss_common - .section .tlbw.ex.text,"ax",@progbits + .org 0x70 dtlb_miss_write: tlbmiss_save .global tlb_miss_common + .align 2 tlb_miss_common: mfsr r0, SYSREG_TLBEAR mfsr r1, SYSREG_PTBR - /* Is it the vmalloc space? */ - bld r0, 31 - brcs handle_vmalloc_miss - - /* First level lookup */ + /* + * First level lookup: The PGD contains virtual pointers to + * the second-level page tables, but they may be NULL if not + * present. + */ pgtbl_lookup: lsr r2, r0, PGDIR_SHIFT ld.w r3, r1[r2 << 2] bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT - bld r3, _PAGE_BIT_PRESENT - brcc page_table_not_present - - /* Translate to virtual address in P1. */ - andl r3, 0xf000 - sbr r3, 31 + cp.w r3, 0 + breq page_table_not_present /* Second level lookup */ ld.w r2, r3[r1 << 2] @@ -148,16 +139,55 @@ pgtbl_lookup: tlbmiss_restore rete -handle_vmalloc_miss: - /* Simply do the lookup in init's page table */ + /* The slow path of the TLB miss handler */ + .align 2 +page_table_not_present: + /* Do we need to synchronize with swapper_pg_dir? */ + bld r0, 31 + brcs sync_with_swapper_pg_dir + +page_not_present: + tlbmiss_restore + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_page_fault + rjmp ret_from_exception + + .align 2 +sync_with_swapper_pg_dir: + /* + * If swapper_pg_dir contains a non-NULL second-level page + * table pointer, copy it into the current PGD. If not, we + * must handle it as a full-blown page fault. + * + * Jumping back to pgtbl_lookup causes an unnecessary lookup, + * but it is guaranteed to be a cache hit, it won't happen + * very often, and we absolutely do not want to sacrifice any + * performance in the fast path in order to improve this. + */ mov r1, lo(swapper_pg_dir) orh r1, hi(swapper_pg_dir) + ld.w r3, r1[r2 << 2] + cp.w r3, 0 + breq page_not_present + mfsr r1, SYSREG_PTBR + st.w r1[r2 << 2], r3 rjmp pgtbl_lookup + /* + * We currently have two bytes left at this point until we + * crash into the system call handler... + * + * Don't worry, the assembler will let us know. + */ + /* --- System Call --- */ - .section .scall.text,"ax",@progbits + .org 0x100 system_call: #ifdef CONFIG_PREEMPT mask_interrupts @@ -266,18 +296,6 @@ syscall_exit_work: brcc syscall_exit_cont rjmp enter_monitor_mode - /* The slow path of the TLB miss handler */ -page_table_not_present: -page_not_present: - tlbmiss_restore - sub sp, 4 - stmts --sp, r0-lr - rcall save_full_context_ex - mfsr r12, SYSREG_ECR - mov r11, sp - rcall do_page_fault - rjmp ret_from_exception - /* This function expects to find offending PC in SYSREG_RAR_EX */ .type save_full_context_ex, @function .align 2 diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c index 5616a00c10b..c5b11f9067f 100644 --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c @@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) goto badframe; + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT) + goto badframe; + pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n", regs->pc, regs->lr, regs->sp); diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 00a9862380f..abd954fb7ba 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -7,21 +7,13 @@ */ #include <linux/clk.h> #include <linux/clockchips.h> -#include <linux/time.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/profile.h> -#include <linux/sysdev.h> -#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/time.h> -#include <asm/div64.h> #include <asm/sysreg.h> -#include <asm/io.h> -#include <asm/sections.h> #include <asm/arch/pm.h> diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index 481cfd40c05..5d25d8eeb75 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -68,14 +68,6 @@ SECTIONS _evba = .; _text = .; *(.ex.text) - . = 0x50; - *(.tlbx.ex.text) - . = 0x60; - *(.tlbr.ex.text) - . = 0x70; - *(.tlbw.ex.text) - . = 0x100; - *(.scall.text) *(.irq.text) KPROBES_TEXT TEXT_TEXT @@ -107,6 +99,10 @@ SECTIONS */ *(.data.init_task) + /* Then, the page-aligned data */ + . = ALIGN(PAGE_SIZE); + *(.data.page_aligned) + /* Then, the cacheline aligned data */ . = ALIGN(L1_CACHE_BYTES); *(.data.cacheline_aligned) diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S index 2be5da7ed26..cb2d8694555 100644 --- a/arch/avr32/lib/io-readsb.S +++ b/arch/avr32/lib/io-readsb.S @@ -41,7 +41,7 @@ __raw_readsb: 2: sub r10, -4 reteq r12 -3: ld.uh r8, r12[0] +3: ld.ub r8, r12[0] sub r10, 1 st.b r11++, r8 brne 3b diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile index e89009439e4..d5018e2eed2 100644 --- a/arch/avr32/mach-at32ap/Makefile +++ b/arch/avr32/mach-at32ap/Makefile @@ -1,3 +1,8 @@ -obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o +obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o +obj-$(CONFIG_PM) += pm.o + +ifeq ($(CONFIG_PM_DEBUG),y) +CFLAGS_pm.o += -DDEBUG +endif diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 0f24b4f85c1..07b21b121ee 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -20,6 +20,7 @@ #include <asm/arch/at32ap700x.h> #include <asm/arch/board.h> #include <asm/arch/portmux.h> +#include <asm/arch/sram.h> #include <video/atmel_lcdc.h> @@ -93,19 +94,12 @@ static struct clk devname##_##_name = { \ static DEFINE_SPINLOCK(pm_lock); -unsigned long at32ap7000_osc_rates[3] = { - [0] = 32768, - /* FIXME: these are ATSTK1002-specific */ - [1] = 20000000, - [2] = 12000000, -}; - static struct clk osc0; static struct clk osc1; static unsigned long osc_get_rate(struct clk *clk) { - return at32ap7000_osc_rates[clk->index]; + return at32_board_osc_rates[clk->index]; } static unsigned long pll_get_rate(struct clk *clk, unsigned long control) @@ -682,6 +676,14 @@ static struct clk hramc_clk = { .users = 1, .index = 3, }; +static struct clk sdramc_clk = { + .name = "sdramc_clk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .users = 1, + .index = 14, +}; static struct resource smc0_resource[] = { PBMEM(0xfff03400), @@ -841,6 +843,81 @@ void __init at32_add_system_devices(void) } /* -------------------------------------------------------------------- + * PSIF + * -------------------------------------------------------------------- */ +static struct resource atmel_psif0_resource[] __initdata = { + { + .start = 0xffe03c00, + .end = 0xffe03cff, + .flags = IORESOURCE_MEM, + }, + IRQ(18), +}; +static struct clk atmel_psif0_pclk = { + .name = "pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 15, +}; + +static struct resource atmel_psif1_resource[] __initdata = { + { + .start = 0xffe03d00, + .end = 0xffe03dff, + .flags = IORESOURCE_MEM, + }, + IRQ(18), +}; +static struct clk atmel_psif1_pclk = { + .name = "pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 15, +}; + +struct platform_device *__init at32_add_device_psif(unsigned int id) +{ + struct platform_device *pdev; + + if (!(id == 0 || id == 1)) + return NULL; + + pdev = platform_device_alloc("atmel_psif", id); + if (!pdev) + return NULL; + + switch (id) { + case 0: + if (platform_device_add_resources(pdev, atmel_psif0_resource, + ARRAY_SIZE(atmel_psif0_resource))) + goto err_add_resources; + atmel_psif0_pclk.dev = &pdev->dev; + select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */ + select_peripheral(PA(9), PERIPH_A, 0); /* DATA */ + break; + case 1: + if (platform_device_add_resources(pdev, atmel_psif1_resource, + ARRAY_SIZE(atmel_psif1_resource))) + goto err_add_resources; + atmel_psif1_pclk.dev = &pdev->dev; + select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */ + select_peripheral(PB(12), PERIPH_A, 0); /* DATA */ + break; + default: + return NULL; + } + + platform_device_add(pdev); + return pdev; + +err_add_resources: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- * USART * -------------------------------------------------------------------- */ @@ -1113,7 +1190,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) switch (id) { case 0: pdev = &atmel_spi0_device; - select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ + /* pullup MISO so a level is always defined */ + select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP); select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ at32_spi_setup_slaves(0, b, n, spi0_pins); @@ -1121,7 +1199,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) case 1: pdev = &atmel_spi1_device; - select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ + /* pullup MISO so a level is always defined */ + select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP); select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ at32_spi_setup_slaves(1, b, n, spi1_pins); @@ -1264,7 +1343,8 @@ static struct clk atmel_lcdfb0_pixclk = { struct platform_device *__init at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - unsigned long fbmem_start, unsigned long fbmem_len) + unsigned long fbmem_start, unsigned long fbmem_len, + unsigned int pin_config) { struct platform_device *pdev; struct atmel_lcdfb_info *info; @@ -1291,37 +1371,77 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, switch (id) { case 0: pdev = &atmel_lcdfb0_device; - select_peripheral(PC(19), PERIPH_A, 0); /* CC */ - select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ - select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ - select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ - select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ - select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ - select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ - select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ - select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ - select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ - select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ - select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ - select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ - select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ - select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ - select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ - select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ - select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ - select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ - select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ - select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ - select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ - select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ - select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ - select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ - select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ - select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ - select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ - select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ - select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + + switch (pin_config) { + case 0: + select_peripheral(PC(19), PERIPH_A, 0); /* CC */ + select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ + select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ + select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ + select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ + select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ + select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ + select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ + select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ + select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ + select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ + select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ + select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ + select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ + select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ + select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ + select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ + select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ + select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ + select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ + select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ + select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ + select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ + select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ + select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ + select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ + select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ + select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ + select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ + select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ + select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + break; + case 1: + select_peripheral(PE(0), PERIPH_B, 0); /* CC */ + select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ + select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ + select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ + select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */ + select_peripheral(PE(2), PERIPH_B, 0); /* MODE */ + select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ + select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */ + select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */ + select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */ + select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */ + select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */ + select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ + select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ + select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ + select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */ + select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */ + select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */ + select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */ + select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */ + select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ + select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ + select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ + select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */ + select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */ + select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */ + select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */ + select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */ + select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */ + select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ + select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + break; + default: + goto err_invalid_id; + } clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); @@ -1360,7 +1480,7 @@ static struct resource atmel_pwm0_resource[] __initdata = { IRQ(24), }; static struct clk atmel_pwm0_mck = { - .name = "mck", + .name = "pwm_clk", .parent = &pbb_clk, .mode = pbb_clk_mode, .get_rate = pbb_clk_get_rate, @@ -1887,6 +2007,7 @@ struct clk *at32_clock_list[] = { &hmatrix_clk, &ebi_clk, &hramc_clk, + &sdramc_clk, &smc0_pclk, &smc0_mck, &pdc_hclk, @@ -1900,6 +2021,8 @@ struct clk *at32_clock_list[] = { &pio4_mck, &at32_tcb0_t0_clk, &at32_tcb1_t0_clk, + &atmel_psif0_pclk, + &atmel_psif1_pclk, &atmel_usart0_usart, &atmel_usart1_usart, &atmel_usart2_usart, @@ -1935,16 +2058,7 @@ struct clk *at32_clock_list[] = { }; unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); -void __init at32_portmux_init(void) -{ - at32_init_pio(&pio0_device); - at32_init_pio(&pio1_device); - at32_init_pio(&pio2_device); - at32_init_pio(&pio3_device); - at32_init_pio(&pio4_device); -} - -void __init at32_clock_init(void) +void __init setup_platform(void) { u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; int i; @@ -1999,4 +2113,36 @@ void __init at32_clock_init(void) pm_writel(HSB_MASK, hsb_mask); pm_writel(PBA_MASK, pba_mask); pm_writel(PBB_MASK, pbb_mask); + + /* Initialize the port muxes */ + at32_init_pio(&pio0_device); + at32_init_pio(&pio1_device); + at32_init_pio(&pio2_device); + at32_init_pio(&pio3_device); + at32_init_pio(&pio4_device); +} + +struct gen_pool *sram_pool; + +static int __init sram_init(void) +{ + struct gen_pool *pool; + + /* 1KiB granularity */ + pool = gen_pool_create(10, -1); + if (!pool) + goto fail; + + if (gen_pool_add(pool, 0x24000000, 0x8000, -1)) + goto err_pool_add; + + sram_pool = pool; + return 0; + +err_pool_add: + gen_pool_destroy(pool); +fail: + pr_err("Failed to create SRAM pool\n"); + return -ENOMEM; } +core_initcall(sram_init); diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c index 097cf4e8405..994c4545e2b 100644 --- a/arch/avr32/mach-at32ap/intc.c +++ b/arch/avr32/mach-at32ap/intc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Atmel Corporation + * Copyright (C) 2006, 2008 Atmel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,14 +12,20 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/sysdev.h> #include <asm/io.h> #include "intc.h" struct intc { - void __iomem *regs; - struct irq_chip chip; + void __iomem *regs; + struct irq_chip chip; + struct sys_device sysdev; +#ifdef CONFIG_PM + unsigned long suspend_ipr; + unsigned long saved_ipr[64]; +#endif }; extern struct platform_device at32_intc0_device; @@ -136,6 +142,74 @@ fail: panic("Interrupt controller initialization failed!\n"); } +#ifdef CONFIG_PM +void intc_set_suspend_handler(unsigned long offset) +{ + intc0.suspend_ipr = offset; +} + +static int intc_suspend(struct sys_device *sdev, pm_message_t state) +{ + struct intc *intc = container_of(sdev, struct intc, sysdev); + int i; + + if (unlikely(!irqs_disabled())) { + pr_err("intc_suspend: called with interrupts enabled\n"); + return -EINVAL; + } + + if (unlikely(!intc->suspend_ipr)) { + pr_err("intc_s |