diff options
-rw-r--r-- | Makefile | 5 | ||||
-rw-r--r-- | arch/arm/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/kernel/Makefile | 3 | ||||
-rw-r--r-- | arch/cris/Makefile | 2 | ||||
-rw-r--r-- | arch/cris/kernel/Makefile | 1 | ||||
-rw-r--r-- | arch/mips/Makefile | 27 | ||||
-rw-r--r-- | arch/mips/kernel/vmlinux.lds.S | 13 | ||||
-rw-r--r-- | arch/powerpc/Makefile | 2 | ||||
-rw-r--r-- | arch/sparc/Makefile | 4 | ||||
-rw-r--r-- | arch/sparc/kernel/Makefile | 6 | ||||
-rw-r--r-- | arch/um/Makefile | 9 | ||||
-rw-r--r-- | arch/um/kernel/Makefile | 3 | ||||
-rw-r--r-- | arch/um/kernel/vmlinux.lds.S | 3 | ||||
-rw-r--r-- | arch/xtensa/kernel/Makefile | 3 | ||||
-rw-r--r-- | scripts/Makefile.build | 3 |
15 files changed, 37 insertions, 49 deletions
@@ -980,11 +980,6 @@ prepare0: archprepare FORCE # All the preparing.. prepare: prepare0 -# Leave this as default for preprocessing vmlinux.lds.S, which is now -# done in arch/$(ARCH)/kernel/Makefile - -export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) - # The asm symlink changes when $(ARCH) changes. # Detect this and ask user to run make mrproper # If asm is a stale symlink (point to dir that does not exist) remove it diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c877d6df23d..41edaf2a618 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -14,7 +14,7 @@ LDFLAGS_vmlinux :=-p --no-undefined -X ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) + OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index ff89d0b3abc..60be28ddc81 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -2,7 +2,8 @@ # Makefile for the linux kernel. # -AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) +CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET) +AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) ifdef CONFIG_DYNAMIC_FTRACE CFLAGS_REMOVE_ftrace.o = -pg diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 71e17d3eedd..29c2ceb38a7 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -42,8 +42,6 @@ LD = $(CROSS_COMPILE)ld -mcrislinux OBJCOPYFLAGS := -O binary -R .note -R .comment -S -CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) - KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc) KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc) KBUILD_CPPFLAGS += $(inc) diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile index ee7bcd4d20b..b45640b3e60 100644 --- a/arch/cris/kernel/Makefile +++ b/arch/cris/kernel/Makefile @@ -3,6 +3,7 @@ # Makefile for the linux kernel. # +CPPFLAGS_vmlinux.lds := -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) extra-y := vmlinux.lds obj-y := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 861da514a46..7d651d58200 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -615,16 +615,6 @@ endif cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ -ifdef CONFIG_32BIT -ifdef CONFIG_CPU_LITTLE_ENDIAN -JIFFIES = jiffies_64 -else -JIFFIES = jiffies_64 + 4 -endif -else -JIFFIES = jiffies_64 -endif - # # Automatically detect the build format. By default we choose # the elf format according to the load address. @@ -648,8 +638,9 @@ ifdef CONFIG_64BIT endif KBUILD_AFLAGS += $(cflags-y) -KBUILD_CFLAGS += $(cflags-y) \ - -D"VMLINUX_LOAD_ADDRESS=$(load-y)" +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)" +KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" LDFLAGS += -m $(ld-emul) @@ -664,18 +655,6 @@ endif OBJCOPYFLAGS += --remove-section=.reginfo -# -# Choosing incompatible machines durings configuration will result in -# error messages during linking. Select a default linkscript if -# none has been choosen above. -# - -CPPFLAGS_vmlinux.lds := \ - $(KBUILD_CFLAGS) \ - -D"LOADADDR=$(load-y)" \ - -D"JIFFIES=$(JIFFIES)" \ - -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" - head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o libs-y += arch/mips/lib/ diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 58738c8d754..576f8fbd1d8 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -9,7 +9,16 @@ PHDRS { text PT_LOAD FLAGS(7); /* RWX */ note PT_NOTE FLAGS(4); /* R__ */ } -jiffies = JIFFIES; + +ifdef CONFIG_32BIT + ifdef CONFIG_CPU_LITTLE_ENDIAN + jiffies = jiffies_64; + else + jiffies = jiffies_64 + 4; + endif +else + jiffies = jiffies_64; +endif SECTIONS { @@ -28,7 +37,7 @@ SECTIONS /* . = 0xa800000000300000; */ . = 0xffffffff80300000; #endif - . = LOADADDR; + . = VMLINUX_LOAD_ADDRESS; /* read-only */ _text = .; /* Text and read-only data */ .text : { diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index bc35f4e2b81..39d44f7ff39 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -158,8 +158,6 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ # Default to zImage, override when needed all: zImage -CPPFLAGS_vmlinux.lds := -Upowerpc - BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.% PHONY += $(BOOT_TARGETS) diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index 2003ded054c..6c2117942e9 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -31,7 +31,6 @@ export BITS := 32 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7 KBUILD_AFLAGS += -m32 -CPPFLAGS_vmlinux.lds += -m32 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000 # Since 2.5.40, the first stage is left not btfix-ed. @@ -49,9 +48,6 @@ else CHECKFLAGS += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64 -# Undefine sparc when processing vmlinux.lds - it is used -# And teach CPP we are doing 64 bit builds (for this case) -CPPFLAGS_vmlinux.lds += -m64 -Usparc LDFLAGS := -m elf64_sparc export BITS := 64 diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 475ce4696ac..cbf5d0b541d 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -7,7 +7,11 @@ ccflags-y := -Werror extra-y := head_$(BITS).o extra-y += init_task.o -extra-y += vmlinux.lds + +# Undefine sparc when processing vmlinux.lds - it is used +# And teach CPP we are doing $(BITS) builds (for this case) +CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS) +extra-y += vmlinux.lds obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o obj-$(CONFIG_SPARC32) += etrap_32.o diff --git a/arch/um/Makefile b/arch/um/Makefile index 0728def3223..fc633dbacf8 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -96,11 +96,10 @@ CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) $(call cc-option, -fno-stack-protector,) \ $(call cc-option, -fno-stack-protector-all,) -CONFIG_KERNEL_STACK_ORDER ?= 2 -STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] ) - -CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \ - -DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE) +# Options used by linker script +export LDS_START := $(START) +export LDS_ELF_ARCH := $(ELF_ARCH) +export LDS_ELF_FORMAT := $(ELF_FORMAT) # The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 388ec0a3ea9..1119233597a 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -3,6 +3,9 @@ # Licensed under the GPL # +CPPFLAGS_vmlinux.lds := -U$(SUBARCH) -DSTART=$(LDS_START) \ + -DELF_ARCH=$(LDS_ELF_ARCH) \ + -DELF_FORMAT=$(LDS_ELF_FORMAT) extra-y := vmlinux.lds clean-files := diff --git a/arch/um/kernel/vmlinux.lds.S b/arch/um/kernel/vmlinux.lds.S index f8aeb448aab..16e49bfa2b4 100644 --- a/arch/um/kernel/vmlinux.lds.S +++ b/arch/um/kernel/vmlinux.lds.S @@ -1,3 +1,6 @@ + +KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER); + #ifdef CONFIG_LD_SCRIPT_STATIC #include "uml.lds.S" #else diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index fe3186de6a3..6f56d95f2c1 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -27,7 +27,8 @@ sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \ -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g' quiet_cmd__cpp_lds_S = LDS $@ - cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@ + cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \ + | sed $(sed-y) >$@ $(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE $(call if_changed_dep,_cpp_lds_S) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 5c4b7a400c1..98112d04fcb 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -269,7 +269,8 @@ targets += $(extra-y) $(MAKECMDGOALS) $(always) # Linker scripts preprocessor (.lds.S -> .lds) # --------------------------------------------------------------------------- quiet_cmd_cpp_lds_S = LDS $@ - cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $< + cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ + -D__ASSEMBLY__ -o $@ $< $(obj)/%.lds: $(src)/%.lds.S FORCE $(call if_changed_dep,cpp_lds_S) |