diff options
| -rw-r--r-- | Documentation/i2c/busses/i2c-viapro | 7 | ||||
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 6 |
3 files changed, 15 insertions, 3 deletions
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 25680346e0a..775f489e86f 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -13,6 +13,9 @@ Supported adapters: * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251 Datasheet: available on request and under NDA from VIA + * VIA Technologies, Inc. CX700 + Datasheet: available on request and under NDA from VIA + Authors: Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com>, @@ -44,6 +47,7 @@ Your lspci -n listing must show one of these : device 1106:3227 (VT8237R) device 1106:3337 (VT8237A) device 1106:3287 (VT8251) + device 1106:8324 (CX700) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. @@ -51,3 +55,6 @@ enable ACPI / SMBus or even USB. Except for the oldest chips (VT82C596A/B, VT82C686A and most probably VT8231), this driver supports I2C block transactions. Such transactions are mainly useful to read from and write to EEPROMs. + +The CX700 additionally appears to support SMBus PEC, although this driver +doesn't implement it yet. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f2894dec51a..25d52e0eec2 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -500,11 +500,11 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA 82C596/82C686/82xx" + tristate "VIA VT82C596/82C686/82xx and CX700" depends on I2C && PCI help If you say yes to this option, support will be included for the VIA - 82C596/82C686/82xx I2C interfaces. Specifically, the following + VT82C596 and later SMBus interface. Specifically, the following chipsets are supported: VT82C596A/B VT82C686A/B @@ -513,6 +513,7 @@ config I2C_VIAPRO VT8235 VT8237R/A VT8251 + CX700 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 43a081f1655..03c5fc86854 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2005 - 2007 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,6 +36,7 @@ VT8237R 0x3227 yes VT8237A 0x3337 yes VT8251 0x3287 yes + CX700 0x8324 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -384,6 +385,7 @@ found: dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CX700: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -443,6 +445,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), + .driver_data = SMBBA3 }, { 0, } }; |