aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS27
-rw-r--r--arch/arm/configs/omap1_defconfig5
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9260.c6
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c2
-rw-r--r--arch/arm/mach-at91/include/mach/system_rev.h2
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c6
-rw-r--r--arch/arm/mach-davinci/dm646x.c1
-rw-r--r--arch/arm/mach-davinci/include/mach/psc.h5
-rw-r--r--arch/arm/mach-davinci/psc.c18
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c9
-rw-r--r--arch/arm/mach-mx5/imx51-dt.c12
-rw-r--r--arch/arm/mach-mx5/imx53-dt.c12
-rw-r--r--arch/arm/mach-mxs/include/mach/mx28.h4
-rw-r--r--arch/arm/mach-mxs/include/mach/mxs.h1
-rw-r--r--arch/arm/mach-mxs/mach-m28evk.c2
-rw-r--r--arch/arm/mach-mxs/mach-stmp378x_devb.c2
-rw-r--r--arch/arm/mach-mxs/module-tx28.c4
-rw-r--r--arch/arm/mach-omap1/clock_data.c12
-rw-r--r--arch/arm/mach-prima2/pm.c1
-rw-r--r--arch/arm/mach-prima2/prima2.c1
-rw-r--r--arch/arm/mach-s3c64xx/dev-spi.c1
-rw-r--r--arch/arm/mach-s3c64xx/s3c6400.c2
-rw-r--r--arch/arm/mach-s3c64xx/setup-fb-24bpp.c2
-rw-r--r--arch/arm/mach-sa1100/Makefile.boot4
29 files changed, 74 insertions, 77 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 44756028499..b4f18024f4e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1054,35 +1054,18 @@ ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/plat-samsung/
F: arch/arm/plat-s3c24xx/
F: arch/arm/plat-s5p/
+F: arch/arm/mach-s3c24*/
+F: arch/arm/mach-s3c64xx/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
-
-ARM/S3C2410 ARM ARCHITECTURE
-M: Ben Dooks <ben-linux@fluff.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.fluff.org/ben/linux/
-S: Maintained
-F: arch/arm/mach-s3c2410/
-
-ARM/S3C244x ARM ARCHITECTURE
-M: Ben Dooks <ben-linux@fluff.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.fluff.org/ben/linux/
-S: Maintained
-F: arch/arm/mach-s3c2440/
-F: arch/arm/mach-s3c2443/
-
-ARM/S3C64xx ARM ARCHITECTURE
-M: Ben Dooks <ben-linux@fluff.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.fluff.org/ben/linux/
-S: Maintained
-F: arch/arm/mach-s3c64xx/
+F: drivers/spi/spi-s3c*
+F: sound/soc/samsung/*
ARM/S5P EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index a7e77758137..945a34f2a34 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_216MHZ=y
-CONFIG_OMAP_ARM_195MHZ=y
-CONFIG_OMAP_ARM_192MHZ=y
CONFIG_OMAP_ARM_182MHZ=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 66591fa53e0..ad930688358 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b84a9f642f5..0d20677fbef 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
- CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
- CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 25e3464fb07..629fa977497 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ae78f4d03b7..a178b58b0b9 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ad017eb1f8d..d5fbac9ff4f 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index 8f4866045b4..ec164a4124c 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -19,7 +19,7 @@
#define BOARD_HAVE_NAND_16BIT (1 << 31)
static inline int board_have_nand_16bit(void)
{
- return system_rev & BOARD_HAVE_NAND_16BIT;
+ return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
}
#endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1d7d2499522..6659a90dbca 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = {
.num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
.tdm_slots = 2,
.serial_dir = da850_iis_serializer_direction,
- .asp_chan_q = EVENTQ_1,
+ .asp_chan_q = EVENTQ_0,
.version = MCASP_VERSION_2,
.txnumevt = 1,
.rxnumevt = 1,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 1918ae71142..46e1f4173b9 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = {
/* UBL (a few copies) plus U-Boot */
.name = "bootloader",
.offset = 0,
- .size = 28 * NAND_BLOCK_SIZE,
+ .size = 30 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
/* U-Boot environment */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e574d7f837a..635bf774015 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
int val;
u32 value;
- if (!vpif_vsclkdis_reg || !cpld_client)
+ if (!vpif_vidclkctl_reg || !cpld_client)
return -ENXIO;
val = i2c_smbus_read_byte(cpld_client);
@@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
return val;
spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(vpif_vsclkdis_reg);
+ value = __raw_readl(vpif_vidclkctl_reg);
if (mux_mode) {
val &= VPIF_INPUT_TWO_CHANNEL;
value |= VIDCH1CLK;
@@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
val |= VPIF_INPUT_ONE_CHANNEL;
value &= ~VIDCH1CLK;
}
- __raw_writel(value, vpif_vsclkdis_reg);
+ __raw_writel(value, vpif_vidclkctl_reg);
spin_unlock_irqrestore(&vpif_reg_lock, flags);
err = i2c_smbus_write_byte(cpld_client, val);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0b68ed534f8..af27c130595 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -161,7 +161,6 @@ static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DM646X_LPSC_C64X_CPU,
- .flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index fa59c097223..8bc3fc25617 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -233,7 +233,7 @@
#define PTCMD 0x120
#define PTSTAT 0x128
#define PDSTAT 0x200
-#define PDCTL1 0x304
+#define PDCTL 0x300
#define MDSTAT 0x800
#define MDCTL 0xA00
@@ -244,7 +244,10 @@
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x3f
+#define PDSTAT_STATE_MASK 0x1f
#define MDCTL_FORCE BIT(31)
+#define PDCTL_NEXT BIT(1)
+#define PDCTL_EPCGOOD BIT(8)
#ifndef __ASSEMBLER__
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1fb6bdff38c..d7e210f4b55 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, bool enable, u32 flags)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
void __iomem *psc_base;
struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 next_state = PSC_STATE_ENABLE;
@@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
mdctl |= MDCTL_FORCE;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = __raw_readl(psc_base + PDSTAT);
- if ((pdstat & 0x00000001) == 0) {
- pdctl1 = __raw_readl(psc_base + PDCTL1);
- pdctl1 |= 0x1;
- __raw_writel(pdctl1, psc_base + PDCTL1);
+ pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
+ if ((pdstat & PDSTAT_STATE_MASK) == 0) {
+ pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+ pdctl |= PDCTL_NEXT;
+ __raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
@@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = __raw_readl(psc_base + PDCTL1);
- pdctl1 |= 0x100;
- __raw_writel(pdctl1, psc_base + PDCTL1);
+ pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+ pdctl |= PDCTL_EPCGOOD;
+ __raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
} else {
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 9cd860a27af..8deb012189b 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -37,14 +37,15 @@ static void __init imx6q_map_io(void)
imx6q_clock_map_io();
}
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 7; /* imx6q gets 7 gpio ports */
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+ gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
+
+ return 0;
}
static const struct of_device_id imx6q_irq_match[] __initconst = {
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
index ccc61585659..596edd967db 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+static int __init imx51_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
+ return 0;
}
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+static int __init imx51_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 4; /* imx51 gets 4 gpio ports */
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+ gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
+
+ return 0;
}
static const struct of_device_id imx51_irq_match[] __initconst = {
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
index ccaa0b81b76..85bfd5ff21b 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+static int __init imx53_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
+ return 0;
}
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+static int __init imx53_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 7; /* imx53 gets 7 gpio ports */
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+ gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
+
+ return 0;
}
static const struct of_device_id imx53_irq_match[] __initconst = {
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
index 75d86118b76..30c7990f3c0 100644
--- a/arch/arm/mach-mxs/include/mach/mx28.h
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -104,8 +104,8 @@
#define MX28_INT_CAN1 9
#define MX28_INT_LRADC_TOUCH 10
#define MX28_INT_HSADC 13
-#define MX28_INT_IRADC_THRESH0 14
-#define MX28_INT_IRADC_THRESH1 15
+#define MX28_INT_LRADC_THRESH0 14
+#define MX28_INT_LRADC_THRESH1 15
#define MX28_INT_LRADC_CH0 16
#define MX28_INT_LRADC_CH1 17
#define MX28_INT_LRADC_CH2 18
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 0d2d2b47099..bde5f663474 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -30,6 +30,7 @@
*/
#define cpu_is_mx23() ( \
machine_is_mx23evk() || \
+ machine_is_stmp378x() || \
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 3b1681e4f49..6b00577b702 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = {
MACHINE_START(M28EVK, "DENX M28 EVK")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = m28evk_init,
.timer = &m28evk_timer,
+ .init_machine = m28evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 177e53123a0..6834dea38c0 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = {
MACHINE_START(STMP378X, "STMP378X")
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
- .init_machine = stmp378x_dvb_init,
.timer = &stmp378x_dvb_timer,
+ .init_machine = stmp378x_dvb_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index 0fcff47009c..9a7b08b2a92 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
MX28_PAD_ENET0_CRS__ENET1_RX_EN,
};
-static struct fec_platform_data tx28_fec0_data = {
+static const struct fec_platform_data tx28_fec0_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
-static struct fec_platform_data tx28_fec1_data = {
+static const struct fec_platform_data tx28_fec1_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 1297bb58869..9ff90a744a2 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -16,6 +16,8 @@
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
@@ -927,16 +929,22 @@ int __init omap1_clk_init(void)
void __init omap1_clk_late_init(void)
{
- if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+ unsigned long rate = ck_dpll1.rate;
+
+ if (rate >= OMAP1_DPLL1_SANE_VALUE)
return;
+ /* System booting at unusable rate, force reprogramming of DPLL1 */
+ ck_dpll1_p->rate = 0;
+
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
omap_writew(0x2290, DPLL_CTL);
- omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+ omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
omap1_show_rates();
+ loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
}
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index cb53160f6c5..26ebb57719d 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index ef555c04196..a12b689a870 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/of.h>
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 5e6b42089eb..3341fd11872 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 7a3bc32df42..51c00f2453c 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void)
s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
}
-struct sysdev_class s3c6400_sysclass = {
+static struct sysdev_class s3c6400_sysclass = {
.name = "s3c6400-core",
};
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 83d2afb79e9..2cf80026c58 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -20,7 +20,7 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-extern void s3c64xx_fb_gpio_setup_24bpp(void)
+void s3c64xx_fb_gpio_setup_24bpp(void)
{
s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
index 5a616f6e561..f7951aa0456 100644
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ b/arch/arm/mach-sa1100/Makefile.boot
@@ -1,5 +1,5 @@
-ifeq ($(CONFIG_ARCH_SA1100),y)
- zreladdr-$(CONFIG_SA1111) += 0xc0208000
+ifeq ($(CONFIG_SA1111),y)
+ zreladdr-y += 0xc0208000
else
zreladdr-y += 0xc0008000
endif