diff options
| -rw-r--r-- | Documentation/ioctl/ioctl-number.txt | 1 | ||||
| -rw-r--r-- | drivers/char/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/char/Makefile | 1 | ||||
| -rw-r--r-- | drivers/char/uv_mmtimer.c | 216 |
4 files changed, 226 insertions, 0 deletions
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index aafca0a8f66..947374977ca 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -135,6 +135,7 @@ Code Seq# Include File Comments <http://mikonos.dia.unisa.it/tcfs> 'l' 40-7F linux/udf_fs_i.h in development: <http://sourceforge.net/projects/linux-udf/> +'m' 00-09 linux/mmtimer.h 'm' all linux/mtio.h conflict! 'm' all linux/soundcard.h conflict! 'm' all linux/synclink.h conflict! diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 6a06913b01d..08a6f50ae79 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -1087,6 +1087,14 @@ config MMTIMER The mmtimer device allows direct userspace access to the Altix system timer. +config UV_MMTIMER + tristate "UV_MMTIMER Memory mapped RTC for SGI UV" + depends on X86_UV + default m + help + The uv_mmtimer device allows direct userspace access to the + UV system timer. + source "drivers/char/tpm/Kconfig" config TELCLOCK diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 66f779ad4f4..19a79dd79ee 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_MMTIMER) += mmtimer.o +obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_IBM_BSR) += bsr.o diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c new file mode 100644 index 00000000000..867b67be9f0 --- /dev/null +++ b/drivers/char/uv_mmtimer.c @@ -0,0 +1,216 @@ +/* + * Timer device implementation for SGI UV platform. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2009 Silicon Graphics, Inc. All rights reserved. + * + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ioctl.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mmtimer.h> +#include <linux/miscdevice.h> +#include <linux/posix-timers.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/math64.h> +#include <linux/smp_lock.h> + +#include <asm/genapic.h> +#include <asm/uv/uv_hub.h> +#include <asm/uv/bios.h> +#include <asm/uv/uv.h> + +MODULE_AUTHOR("Dimitri Sivanich <sivanich@sgi.com>"); +MODULE_DESCRIPTION("SGI UV Memory Mapped RTC Timer"); +MODULE_LICENSE("GPL"); + +/* name of the device, usually in /dev */ +#define UV_MMTIMER_NAME "mmtimer" +#define UV_MMTIMER_DESC "SGI UV Memory Mapped RTC Timer" +#define UV_MMTIMER_VERSION "1.0" + +static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd, + unsigned long arg); +static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma); + +/* + * Period in femtoseconds (10^-15 s) + */ +static unsigned long uv_mmtimer_femtoperiod; + +static const struct file_operations uv_mmtimer_fops = { + .owner = THIS_MODULE, + .mmap = uv_mmtimer_mmap, + .unlocked_ioctl = uv_mmtimer_ioctl, +}; + +/** + * uv_mmtimer_ioctl - ioctl interface for /dev/uv_mmtimer + * @file: file structure for the device + * @cmd: command to execute + * @arg: optional argument to command + * + * Executes the command specified by @cmd. Returns 0 for success, < 0 for + * failure. + * + * Valid commands: + * + * %MMTIMER_GETOFFSET - Should return the offset (relative to the start + * of the page where the registers are mapped) for the counter in question. + * + * %MMTIMER_GETRES - Returns the resolution of the clock in femto (10^-15) + * seconds + * + * %MMTIMER_GETFREQ - Copies the frequency of the clock in Hz to the address + * specified by @arg + * + * %MMTIMER_GETBITS - Returns the number of bits in the clock's counter + * + * %MMTIMER_MMAPAVAIL - Returns 1 if registers can be mmap'd into userspace + * + * %MMTIMER_GETCOUNTER - Gets the current value in the counter and places it + * in the address specified by @arg. + */ +static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = 0; + + switch (cmd) { + case MMTIMER_GETOFFSET: /* offset of the counter */ + /* + * UV RTC register is on its own page + */ + if (PAGE_SIZE <= (1 << 16)) + ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1)) + / 8; + else + ret = -ENOSYS; + break; + + case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */ + if (copy_to_user((unsigned long __user *)arg, + &uv_mmtimer_femtoperiod, sizeof(unsigned long))) + ret = -EFAULT; + break; + + case MMTIMER_GETFREQ: /* frequency in Hz */ + if (copy_to_user((unsigned long __user *)arg, + &sn_rtc_cycles_per_second, + sizeof(unsigned long))) + ret = -EFAULT; + break; + + case MMTIMER_GETBITS: /* number of bits in the clock */ + ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK); + break; + + case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */ + ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0; + break; + + case MMTIMER_GETCOUNTER: + if (copy_to_user((unsigned long __user *)arg, + (unsigned long *)uv_local_mmr_address(UVH_RTC), + sizeof(unsigned long))) + ret = -EFAULT; + break; + default: + ret = -ENOTTY; + break; + } + return ret; +} + +/** + * uv_mmtimer_mmap - maps the clock's registers into userspace + * @file: file structure for the device + * @vma: VMA to map the registers into + * + * Calls remap_pfn_range() to map the clock's registers into + * the calling process' address space. + */ +static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long uv_mmtimer_addr; + + if (vma->vm_end - vma->vm_start != PAGE_SIZE) + return -EINVAL; + + if (vma->vm_flags & VM_WRITE) + return -EPERM; + + if (PAGE_SIZE > (1 << 16)) + return -ENOSYS; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + uv_mmtimer_addr = UV_LOCAL_MMR_BASE | UVH_RTC; + uv_mmtimer_addr &= ~(PAGE_SIZE - 1); + uv_mmtimer_addr &= 0xfffffffffffffffUL; + + if (remap_pfn_range(vma, vma->vm_start, uv_mmtimer_addr >> PAGE_SHIFT, + PAGE_SIZE, vma->vm_page_prot)) { + printk(KERN_ERR "remap_pfn_range failed in uv_mmtimer_mmap\n"); + return -EAGAIN; + } + + return 0; +} + +static struct miscdevice uv_mmtimer_miscdev = { + MISC_DYNAMIC_MINOR, + UV_MMTIMER_NAME, + &uv_mmtimer_fops +}; + + +/** + * uv_mmtimer_init - device initialization routine + * + * Does initial setup for the uv_mmtimer device. + */ +static int __init uv_mmtimer_init(void) +{ + if (!is_uv_system()) { + printk(KERN_ERR "%s: Hardware unsupported\n", UV_MMTIMER_NAME); + return -1; + } + + /* + * Sanity check the cycles/sec variable + */ + if (sn_rtc_cycles_per_second < 100000) { + printk(KERN_ERR "%s: unable to determine clock frequency\n", + UV_MMTIMER_NAME); + return -1; + } + + uv_mmtimer_femtoperiod = ((unsigned long)1E15 + + sn_rtc_cycles_per_second / 2) / + sn_rtc_cycles_per_second; + + if (misc_register(&uv_mmtimer_miscdev)) { + printk(KERN_ERR "%s: failed to register device\n", + UV_MMTIMER_NAME); + return -1; + } + + printk(KERN_INFO "%s: v%s, %ld MHz\n", UV_MMTIMER_DESC, + UV_MMTIMER_VERSION, + sn_rtc_cycles_per_second/(unsigned long)1E6); + + return 0; +} + +module_init(uv_mmtimer_init); |