aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/include/asm/uv/uv_bau.h247
-rw-r--r--arch/x86/kernel/tlb_uv.c1270
2 files changed, 1075 insertions, 442 deletions
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index b414d2b401f..aa558ac0306 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -27,13 +27,14 @@
* set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
*
* We will use 31 sets, one for sending BAU messages from each of the 32
- * cpu's on the node.
+ * cpu's on the uvhub.
*
* TLB shootdown will use the first of the 8 descriptors of each set.
* Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
*/
#define UV_ITEMS_PER_DESCRIPTOR 8
+#define MAX_BAU_CONCURRENT 3
#define UV_CPUS_PER_ACT_STATUS 32
#define UV_ACT_STATUS_MASK 0x3
#define UV_ACT_STATUS_SIZE 2
@@ -45,6 +46,9 @@
#define UV_PAYLOADQ_PNODE_SHIFT 49
#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
/*
* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
@@ -55,15 +59,29 @@
#define DESC_STATUS_SOURCE_TIMEOUT 3
/*
- * source side thresholds at which message retries print a warning
+ * source side threshholds at which message retries print a warning
*/
#define SOURCE_TIMEOUT_LIMIT 20
#define DESTINATION_TIMEOUT_LIMIT 20
/*
+ * misc. delays, in microseconds
+ */
+#define THROTTLE_DELAY 10
+#define TIMEOUT_DELAY 10
+#define BIOS_TO 1000
+/* BIOS is assumed to set the destination timeout to 1003520 nanoseconds */
+
+/*
+ * threshholds at which to use IPI to free resources
+ */
+#define PLUGSB4RESET 100
+#define TIMEOUTSB4RESET 100
+
+/*
* number of entries in the destination side payload queue
*/
-#define DEST_Q_SIZE 17
+#define DEST_Q_SIZE 20
/*
* number of destination side software ack resources
*/
@@ -72,9 +90,10 @@
/*
* completion statuses for sending a TLB flush message
*/
-#define FLUSH_RETRY 1
-#define FLUSH_GIVEUP 2
-#define FLUSH_COMPLETE 3
+#define FLUSH_RETRY_PLUGGED 1
+#define FLUSH_RETRY_TIMEOUT 2
+#define FLUSH_GIVEUP 3
+#define FLUSH_COMPLETE 4
/*
* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
@@ -86,14 +105,14 @@
* 'base_dest_nodeid' field of the header corresponds to the
* destination nodeID associated with that specified bit.
*/
-struct bau_target_nodemask {
- unsigned long bits[BITS_TO_LONGS(256)];
+struct bau_target_uvhubmask {
+ unsigned long bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)];
};
/*
- * mask of cpu's on a node
+ * mask of cpu's on a uvhub
* (during initialization we need to check that unsigned long has
- * enough bits for max. cpu's per node)
+ * enough bits for max. cpu's per uvhub)
*/
struct bau_local_cpumask {
unsigned long bits;
@@ -135,8 +154,8 @@ struct bau_msg_payload {
struct bau_msg_header {
unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
- unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
- /* bits 20:6 */ /* first bit in node_map */
+ unsigned int base_dest_nodeid:15; /* nasid (pnode<<1) of */
+ /* bits 20:6 */ /* first bit in uvhub map */
unsigned int command:8; /* message type */
/* bits 28:21 */
/* 0x38: SN3net EndPoint Message */
@@ -146,26 +165,38 @@ struct bau_msg_header {
unsigned int rsvd_2:9; /* must be zero */
/* bits 40:32 */
/* Suppl_A is 56-41 */
- unsigned int payload_2a:8;/* becomes byte 16 of msg */
- /* bits 48:41 */ /* not currently using */
- unsigned int payload_2b:8;/* becomes byte 17 of msg */
- /* bits 56:49 */ /* not currently using */
+ unsigned int sequence:16;/* message sequence number */
+ /* bits 56:41 */ /* becomes bytes 16-17 of msg */
/* Address field (96:57) is never used as an
address (these are address bits 42:3) */
+
unsigned int rsvd_3:1; /* must be zero */
/* bit 57 */
/* address bits 27:4 are payload */
- /* these 24 bits become bytes 12-14 of msg */
+ /* these next 24 (58-81) bits become bytes 12-14 of msg */
+
+ /* bits 65:58 land in byte 12 */
unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */
/* bit 58 */
-
- unsigned int payload_1a:5;/* not currently used */
- /* bits 63:59 */
- unsigned int payload_1b:8;/* not currently used */
- /* bits 71:64 */
- unsigned int payload_1c:8;/* not currently used */
- /* bits 79:72 */
- unsigned int payload_1d:2;/* not currently used */
+ unsigned int msg_type:3; /* software type of the message*/
+ /* bits 61:59 */
+ unsigned int canceled:1; /* message canceled, resource to be freed*/
+ /* bit 62 */
+ unsigned int payload_1a:1;/* not currently used */
+ /* bit 63 */
+ unsigned int payload_1b:2;/* not currently used */
+ /* bits 65:64 */
+
+ /* bits 73:66 land in byte 13 */
+ unsigned int payload_1ca:6;/* not currently used */
+ /* bits 71:66 */
+ unsigned int payload_1c:2;/* not currently used */
+ /* bits 73:72 */
+
+ /* bits 81:74 land in byte 14 */
+ unsigned int payload_1d:6;/* not currently used */
+ /* bits 79:74 */
+ unsigned int payload_1e:2;/* not currently used */
/* bits 81:80 */
unsigned int rsvd_4:7; /* must be zero */
@@ -178,7 +209,7 @@ struct bau_msg_header {
/* bits 95:90 */
unsigned int rsvd_6:5; /* must be zero */
/* bits 100:96 */
- unsigned int int_both:1;/* if 1, interrupt both sockets on the blade */
+ unsigned int int_both:1;/* if 1, interrupt both sockets on the uvhub */
/* bit 101*/
unsigned int fairness:3;/* usually zero */
/* bits 104:102 */
@@ -191,13 +222,18 @@ struct bau_msg_header {
/* bits 127:107 */
};
+/* see msg_type: */
+#define MSG_NOOP 0
+#define MSG_REGULAR 1
+#define MSG_RETRY 2
+
/*
* The activation descriptor:
* The format of the message to send, plus all accompanying control
* Should be 64 bytes
*/
struct bau_desc {
- struct bau_target_nodemask distribution;
+ struct bau_target_uvhubmask distribution;
/*
* message template, consisting of header and payload:
*/
@@ -237,19 +273,25 @@ struct bau_payload_queue_entry {
unsigned short acknowledge_count; /* filled in by destination */
/* 16 bits, bytes 10-11 */
- unsigned short replied_to:1; /* sent as 0 by the source */
- /* 1 bit */
- unsigned short unused1:7; /* not currently using */
- /* 7 bits: byte 12) */
+ /* these next 3 bytes come from bits 58-81 of the message header */
+ unsigned short replied_to:1; /* sent as 0 by the source */
+ unsigned short msg_type:3; /* software message type */
+ unsigned short canceled:1; /* sent as 0 by the source */
+ unsigned short unused1:3; /* not currently using */
+ /* byte 12 */
- unsigned char unused2[2]; /* not currently using */
- /* bytes 13-14 */
+ unsigned char unused2a; /* not currently using */
+ /* byte 13 */
+ unsigned char unused2; /* not currently using */
+ /* byte 14 */
unsigned char sw_ack_vector; /* filled in by the hardware */
/* byte 15 (bits 127:120) */
- unsigned char unused4[3]; /* not currently using bytes 17-19 */
- /* bytes 17-19 */
+ unsigned short sequence; /* message sequence number */
+ /* bytes 16-17 */
+ unsigned char unused4[2]; /* not currently using bytes 18-19 */
+ /* bytes 18-19 */
int number_of_cpus; /* filled in at destination */
/* 32 bits, bytes 20-23 (aligned) */
@@ -259,63 +301,93 @@ struct bau_payload_queue_entry {
};
/*
- * one for every slot in the destination payload queue
- */
-struct bau_msg_status {
- struct bau_local_cpumask seen_by; /* map of cpu's */
-};
-
-/*
- * one for every slot in the destination software ack resources
- */
-struct bau_sw_ack_status {
- struct bau_payload_queue_entry *msg; /* associated message */
- int watcher; /* cpu monitoring, or -1 */
-};
-
-/*
- * one on every node and per-cpu; to locate the software tables
+ * one per-cpu; to locate the software tables
*/
struct bau_control {
struct bau_desc *descriptor_base;
- struct bau_payload_queue_entry *bau_msg_head;
struct bau_payload_queue_entry *va_queue_first;
struct bau_payload_queue_entry *va_queue_last;
- struct bau_msg_status *msg_statuses;
- int *watching; /* pointer to array */
+ struct bau_payload_queue_entry *bau_msg_head;
+ struct bau_control *uvhub_master;
+ struct bau_control *socket_master;
+ unsigned long timeout_interval;
+ atomic_t active_descriptor_count;
+ int max_concurrent;
+ int max_concurrent_constant;
+ int retry_message_scans;
+ int plugged_tries;
+ int timeout_tries;
+ int ipi_attempts;
+ int conseccompletes;
+ short cpu;
+ short uvhub_cpu;
+ short uvhub;
+ short cpus_in_socket;
+ short cpus_in_uvhub;
+ unsigned short message_number;
+ unsigned short uvhub_quiesce;
+ short socket_acknowledge_count[DEST_Q_SIZE];
+ cycles_t send_message;
+ spinlock_t masks_lock;
+ spinlock_t uvhub_lock;
+ spinlock_t queue_lock;
};
/*
* This structure is allocated per_cpu for UV TLB shootdown statistics.
*/
struct ptc_stats {
- unsigned long ptc_i; /* number of IPI-style flushes */
- unsigned long requestor; /* number of nodes this cpu sent to */
- unsigned long requestee; /* times cpu was remotely requested */
- unsigned long alltlb; /* times all tlb's on this cpu were flushed */
- unsigned long onetlb; /* times just one tlb on this cpu was flushed */
- unsigned long s_retry; /* retries on source side timeouts */
- unsigned long d_retry; /* retries on destination side timeouts */
- unsigned long sflush; /* cycles spent in uv_flush_tlb_others */
- unsigned long dflush; /* cycles spent on destination side */
- unsigned long retriesok; /* successes on retries */
- unsigned long nomsg; /* interrupts with no message */
- unsigned long multmsg; /* interrupts with multiple messages */
- unsigned long ntargeted;/* nodes targeted */
+ /* sender statistics */
+ unsigned long s_giveup; /* number of fall backs to IPI-style flushes */
+ unsigned long s_requestor; /* number of shootdown requests */
+ unsigned long s_stimeout; /* source side timeouts */
+ unsigned long s_dtimeout; /* destination side timeouts */
+ unsigned long s_time; /* time spent in sending side */
+ unsigned long s_retriesok; /* successful retries */
+ unsigned long s_ntargcpu; /* number of cpus targeted */
+ unsigned long s_ntarguvhub; /* number of uvhubs targeted */
+ unsigned long s_ntarguvhub16; /* number of times >= 16 target hubs */
+ unsigned long s_ntarguvhub8; /* number of times >= 8 target hubs */
+ unsigned long s_ntarguvhub4; /* number of times >= 4 target hubs */
+ unsigned long s_ntarguvhub2; /* number of times >= 2 target hubs */
+ unsigned long s_ntarguvhub1; /* number of times == 1 target hub */
+ unsigned long s_resets_plug; /* ipi-style resets from plug state */
+ unsigned long s_resets_timeout; /* ipi-style resets from timeouts */
+ unsigned long s_busy; /* status stayed busy past s/w timer */
+ unsigned long s_throttles; /* waits in throttle */
+ unsigned long s_retry_messages; /* retry broadcasts */
+ /* destination statistics */
+ unsigned long d_alltlb; /* times all tlb's on this cpu were flushed */
+ unsigned long d_onetlb; /* times just one tlb on this cpu was flushed */
+ unsigned long d_multmsg; /* interrupts with multiple messages */
+ unsigned long d_nomsg; /* interrupts with no message */
+ unsigned long d_time; /* time spent on destination side */
+ unsigned long d_requestee; /* number of messages processed */
+ unsigned long d_retries; /* number of retry messages processed */
+ unsigned long d_canceled; /* number of messages canceled by retries */
+ unsigned long d_nocanceled; /* retries that found nothing to cancel */
+ unsigned long d_resets; /* number of ipi-style requests processed */
+ unsigned long d_rcanceled; /* number of messages canceled by resets */
};
-static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
+static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp)
{
- return constant_test_bit(node, &dstp->bits[0]);
+ return constant_test_bit(uvhub, &dstp->bits[0]);
}
-static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
+static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp)
{
- __set_bit(node, &dstp->bits[0]);
+ __set_bit(uvhub, &dstp->bits[0]);
}
-static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
+static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp,
+ int nbits)
{
bitmap_zero(&dstp->bits[0], nbits);
}
+static inline int bau_uvhub_weight(struct bau_target_uvhubmask *dstp)
+{
+ return bitmap_weight((unsigned long *)&dstp->bits[0],
+ UV_DISTRIBUTION_SIZE);
+}
static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
{
@@ -328,4 +400,35 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
extern void uv_bau_message_intr1(void);
extern void uv_bau_timeout_intr1(void);
+struct atomic_short {
+ short counter;
+};
+
+/**
+ * atomic_read_short - read a short atomic variable
+ * @v: pointer of type atomic_short
+ *
+ * Atomically reads the value of @v.
+ */
+static inline int atomic_read_short(const struct atomic_short *v)
+{
+ return v->counter;
+}
+
+/**
+ * atomic_add_short_return - add and return a short int
+ * @i: short value to add
+ * @v: pointer of type atomic_short
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_short_return(short i, struct atomic_short *v)
+{
+ short __i = i;
+ asm volatile(LOCK_PREFIX "xaddw %0, %1"
+ : "+r" (i), "+m" (v->counter)
+ : : "memory");
+ return i + __i;
+}
+
#endif /* _ASM_X86_UV_UV_BAU_H */
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index ef68ba48564..414f7c4fe76 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -1,7 +1,7 @@
/*
* SGI UltraViolet TLB flush routines.
*
- * (c) 2008 Cliff Wickman <cpw@sgi.com>, SGI.
+ * (c) 2008-2010 Cliff Wickman <cpw@sgi.com>, SGI.
*
* This code is released under the GNU General Public License version 2 or
* later.
@@ -19,44 +19,67 @@
#include <asm/idle.h>
#include <asm/tsc.h>
#include <asm/irq_vectors.h>
+#include <asm/timer.h>
+
+struct msg_desc {
+ struct bau_payload_queue_entry *msg;
+ int msg_slot;
+ int sw_ack_slot;
+ struct bau_payload_queue_entry *va_queue_first;
+ struct bau_payload_queue_entry *va_queue_last;
+};
#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
-static struct bau_control **uv_bau_table_bases __read_mostly;
-static int uv_bau_retry_limit __read_mostly;
+static int uv_bau_max_concurrent __read_mostly;
-/* base pnode in this partition */
-static int uv_partition_base_pnode __read_mostly;
+static int nobau;
+static int __init setup_nobau(char *arg)
+{
+ nobau = 1;
+ return 0;
+}
+early_param("nobau", setup_nobau);
-static unsigned long uv_mmask __read_mostly;
+/* base pnode in this partition */
+static int uv_partition_base_pnode __read_mostly;
+/* position of pnode (which is nasid>>1): */
+static int uv_nshift __read_mostly;
+static unsigned long uv_mmask __read_mostly;
static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
static DEFINE_PER_CPU(struct bau_control, bau_control);
+static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
+
+struct reset_args {
+ int sender;
+};
/*
- * Determine the first node on a blade.
+ * Determine the first node on a uvhub. 'Nodes' are used for kernel
+ * memory allocation.
*/
-static int __init blade_to_first_node(int blade)
+static int __init uvhub_to_first_node(int uvhub)
{
int node, b;
for_each_online_node(node) {
b = uv_node_to_blade_id(node);
- if (blade == b)
+ if (uvhub == b)
return node;
}
- return -1; /* shouldn't happen */
+ return -1;
}
/*
- * Determine the apicid of the first cpu on a blade.
+ * Determine the apicid of the first cpu on a uvhub.
*/
-static int __init blade_to_first_apicid(int blade)
+static int __init uvhub_to_first_apicid(int uvhub)
{
int cpu;
for_each_present_cpu(cpu)
- if (blade == uv_cpu_to_blade_id(cpu))
+ if (uvhub == uv_cpu_to_blade_id(cpu))
return per_cpu(x86_cpu_to_apicid, cpu);
return -1;
}
@@ -69,195 +92,459 @@ static int __init blade_to_first_apicid(int blade)
* clear of the Timeout bit (as well) will free the resource. No reply will
* be sent (the hardware will only do one reply per message).
*/
-static void uv_reply_to_message(int resource,
- struct bau_payload_queue_entry *msg,
- struct bau_msg_status *msp)
+static inline void uv_reply_to_message(struct msg_desc *mdp,
+ struct bau_control *bcp)
{
unsigned long dw;
+ struct bau_payload_queue_entry *msg;
- dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource);
+ msg = mdp->msg;
+ if (!msg->canceled) {
+ dw = (msg->sw_ack_vector << UV_SW_ACK_NPENDING) |
+ msg->sw_ack_vector;
+ uv_write_local_mmr(
+ UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw);
+ }
msg->replied_to = 1;
msg->sw_ack_vector = 0;
- if (msp)
- msp->seen_by.bits = 0;
- uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw);
}
/*
- * Do all the things a cpu should do for a TLB shootdown message.
- * Other cpu's may come here at the same time for this message.
+ * Process the receipt of a RETRY message
*/
-static void uv_bau_process_message(struct bau_payload_queue_entry *msg,
- int msg_slot, int sw_ack_slot)
+static inline void uv_bau_process_retry_msg(struct msg_desc *mdp,
+ struct bau_control *bcp)
{
- unsigned long this_cpu_mask;
- struct bau_msg_status *msp;
- int cpu;
+ int i;
+ int cancel_count = 0;
+ int slot2;
+ unsigned long msg_res;
+ unsigned long mmr = 0;
+ struct bau_payload_queue_entry *msg;
+ struct bau_payload_queue_entry *msg2;
+ struct ptc_stats *stat;
- msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
- cpu = uv_blade_processor_id();
- msg->number_of_cpus =
- uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
- this_cpu_mask = 1UL << cpu;
- if (msp->seen_by.bits & this_cpu_mask)
- return;
- atomic_or_long(&msp->seen_by.bits, this_cpu_mask);
+ msg = mdp->msg;
+ stat = &per_cpu(ptcstats, bcp->cpu);
+ stat->d_retries++;
+ /*
+ * cancel any message from msg+1 to the retry itself
+ */
+ for (msg2 = msg+1, i = 0; i < DEST_Q_SIZE; msg2++, i++) {
+ if (msg2 > mdp->va_queue_last)
+ msg2 = mdp->va_queue_first;
+ if (msg2 == msg)
+ break;
+
+ /* same conditions for cancellation as uv_do_reset */
+ if ((msg2->replied_to == 0) && (msg2->canceled == 0) &&
+ (msg2->sw_ack_vector) && ((msg2->sw_ack_vector &
+ msg->sw_ack_vector) == 0) &&
+ (msg2->sending_cpu == msg->sending_cpu) &&
+ (msg2->msg_type != MSG_NOOP)) {
+ slot2 = msg2 - mdp->va_queue_first;
+ mmr = uv_read_local_mmr
+ (UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
+ msg_res = ((msg2->sw_ack_vector << 8) |
+ msg2->sw_ack_vector);
+ /*
+ * This is a message retry; clear the resources held
+ * by the previous message only if they timed out.
+ * If it has not timed out we have an unexpected
+ * situation to report.
+ */
+ if (mmr & (msg_res << 8)) {
+ /*
+ * is the resource timed out?
+ * make everyone ignore the cancelled message.
+ */
+ msg2->canceled = 1;
+ stat->d_canceled++;
+ cancel_count++;
+ uv_write_local_mmr(
+ UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS,
+ (msg_res << 8) | msg_res);
+ } else
+ printk(KERN_INFO "note bau retry: no effect\n");
+ }
+ }
+ if (!cancel_count)
+ stat->d_nocanceled++;
+}
- if (msg->replied_to == 1)
- return;
+/*
+ * Do all the things a cpu should do for a TLB shootdown message.
+ * Other cpu's may come here at the same time for this message.
+ */
+static void uv_bau_process_message(struct msg_desc *mdp,
+ struct bau_control *bcp)
+{
+ int msg_ack_count;
+ short socket_ack_count = 0;
+ struct ptc_stats *stat;
+ struct bau_payload_queue_entry *msg;
+ struct bau_control *smaster = bcp->socket_master;
+ /*
+ * This must be a normal message, or retry of a normal message
+ */
+ msg = mdp->msg;
+ stat = &per_cpu(ptcstats, bcp->cpu);
if (msg->address == TLB_FLUSH_ALL) {
local_flush_tlb();
- __get_cpu_var(ptcstats).alltlb++;
+ stat->d_alltlb++;
} else {
__flush_tlb_one(msg->address);
- __get_cpu_var(ptcstats).onetlb++;
+ stat->d_onetlb++;
}
+ stat->d_requestee++;
+
+ /*
+ * One cpu on each uvhub has the additional job on a RETRY
+ * of releasing the resource held by the message that is
+ * being retried. That message is identified by sending
+ * cpu number.
+ */
+ if (msg->msg_type == MSG_RETRY && bcp == bcp->uvhub_master)
+ uv_bau_process_retry_msg(mdp, bcp);
- __get_cpu_var(ptcstats).requestee++;
+ /*
+ * This is a sw_ack message, so we have to reply to it.
+ * Count each responding cpu on the socket. This avoids
+ * pinging the count's cache line back and forth between
+ * the sockets.
+ */
+ socket_ack_count = atomic_add_short_return(1, (struct atomic_short *)
+ &smaster->socket_acknowledge_count[mdp->msg_slot]);
+ if (socket_ack_count == bcp->cpus_in_socket) {
+ /*
+ * Both sockets dump their completed count total into
+ * the message's count.
+ */
+ smaster->socket_acknowledge_count[mdp->msg_slot] = 0;
+ msg_ack_count = atomic_add_short_return(socket_ack_count,
+ (struct atomic_short *)&msg->acknowledge_count);
+
+ if (msg_ack_count == bcp->cpus_in_uvhub) {
+ /*
+ * All cpus in uvhub saw it; reply
+ */
+ uv_reply_to_message(mdp, bcp);
+ }
+ }
- atomic_inc_short(&msg->acknowledge_count);
- if (msg->number_of_cpus == msg->acknowledge_count)
- uv_reply_to_message(sw_ack_slot, msg, msp);
+ return;
}
/*
- * Examine the payload queue on one distribution node to see
- * which messages have not been seen, and which cpu(s) have not seen them.
+ * Determine the first cpu on a uvhub.
+ */
+static int uvhub_to_first_cpu(int uvhub)
+{
+ int cpu;
+ for_each_present_cpu(cpu)
+ if (uvhub == uv_cpu_to_blade_id(cpu))
+ return cpu;
+ return -1;
+}
+
+/*
+ * Last resort when we get a large number of destination timeouts is
+ * to clear resources held by a given cpu.
+ * Do this with IPI so that all messages in the BAU message queue
+ * can be identified by their nonzero sw_ack_vector field.
*
- * Returns the number of cpu's that have not responded.
+ * This is entered for a single cpu on the uvhub.
+ * The sender want's this uvhub to free a specific message's
+ * sw_ack resources.
*/
-static int uv_examine_destination(struct bau_control *bau_tablesp, int sender)
+static void
+uv_do_reset(void *ptr)
{
- struct bau_payload_queue_entry *msg;
- struct bau_msg_status *msp;
- int count = 0;
int i;
- int j;
+ int slot;
+ int count = 0;
+ unsigned long mmr;
+ unsigned long msg_res;
+ struct bau_control *bcp;
+ struct reset_args *rap;
+ struct bau_payload_queue_entry *msg;
+ struct ptc_stats *stat;
- for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE;
- msg++, i++) {
- if ((msg->sending_cpu == sender) && (!msg->replied_to)) {
- msp = bau_tablesp->msg_statuses + i;
- printk(KERN_DEBUG
- "blade %d: address:%#lx %d of %d, not cpu(s): ",
- i, msg->address, msg->acknowledge_count,
- msg->number_of_cpus);
- for (j = 0; j < msg->number_of_cpus; j++) {
- if (!((1L << j) & msp->seen_by.bits)) {
- count++;
- printk("%d ", j);
- }
+ bcp = &per_cpu(bau_control, smp_processor_id());
+ rap = (struct reset_args *)ptr;
+ stat = &per_cpu(ptcstats, bcp->cpu);
+ stat->d_resets++;
+
+ /*
+ * We're looking for the given sender, and
+ * will free its sw_ack resource.
+ * If all cpu's finally responded after the timeout, its
+ * message 'replied_to' was set.
+ */
+ for (msg = bcp->va_queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) {
+ /* uv_do_reset: same conditions for cancellation as
+ uv_bau_process_retry_msg() */
+ if ((msg->replied_to == 0) &&
+ (msg->canceled == 0) &&
+ (msg->sending_cpu == rap->sender) &&
+ (msg->sw_ack_vector) &&
+ (msg->msg_type != MSG_NOOP)) {
+ /*
+ * make everyone else ignore this message
+ */
+ msg->canceled = 1;
+ slot = msg - bcp->va_queue_first;
+ count++;
+ /*
+ * only reset the resource if it is still pending
+ */
+ mmr = uv_read_local_mmr
+ (UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
+ msg_res = ((msg->sw_ack_vector << 8) |
+ msg->sw_ack_vector);
+ if (mmr & msg_res) {
+ stat->d_rcanceled++;
+ uv_write_local_mmr(
+ UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS,
+ msg_res);
}
- printk("\n");
}
}
- return count;
+ return;
}
/*
- * Examine the payload queue on all the distribution nodes to see
- * which messages have not been seen, and which cpu(s) have not seen them.
- *
- * Returns the number of cpu's that have not responded.
+ * Use IPI to get all target uvhubs to release resources held by
+ * a given sending cpu number.
*/
-static int uv_examine_destinations(struct bau_target_nodemask *distribution)
+static void uv_reset_with_ipi(struct bau_target_uvhubmask *distribution,
+ int sender)
{
- int sender;
- int i;
- int count = 0;
+ int uvhub;
+ int cpu;
+ cpumask_t mask;
+ struct reset_args reset_args;
- sender = smp_processor_id();
- for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) {
- if (!bau_node_isset(i, distribution))
+ reset_args.sender = sender;
+
+ cpus_clear(mask);
+ /* find a single cpu for each uvhub in this distribution mask */
+ for (uvhub = 0;
+ uvhub < sizeof(struct bau_target_uvhubmask) * BITSPERBYTE;
+ uvhub++) {
+ if (!bau_uvhub_isset(uvhub, distribution))
continue;
- count += uv_examine_destination(uv_bau_table_bases[i], sender);
+ /* find a cpu for this uvhub */
+ cpu = uvhub_to_first_cpu(uvhub);
+ cpu_set(cpu, mask);
}
- return count;
+ /* IPI all cpus; Preemption is already disabled */
+ smp_call_function_many(&mask, uv_do_reset, (void *)&reset_args, 1);
+ return;
+}
+
+static inline unsigned long
+cycles_2_us(unsigned long long cyc)
+{
+ unsigned long long ns;
+ unsigned long us;
+ ns = (cyc * per_cpu(cyc2ns, smp_processor_id()))
+ >> CYC2NS_SCALE_FACTOR;
+ us = ns / 1000;
+ return us;
}
/*
- * wait for completion of a broadcast message
- *
- * return COMPLETE, RETRY or GIVEUP
+ * wait for all cpus on this hub to finish their sends and go quiet
+ * leaves uvhub_quiesce set so that no new broadcasts are started by
+ * bau_flush_send_and_wait()
+ */
+static inline void
+quiesce_local_uvhub(struct bau_control *hmaster)
+{
+ atomic_add_short_return(1, (struct atomic_short *)
+ &hmaster->uvhub_quiesce);
+}
+
+/*
+ * mark this quiet-requestor as done
+ */
+static inline void
+end_uvhub_quiesce(struct bau_control *hmaster)
+{
+ atomic_add_short_return(-1, (struct atomic_short *)
+ &hmaster->uvhub_quiesce);
+}
+
+/*
+ * Wait for completion of a broadcast software ack message
+ * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP
*/
static int uv_wait_completion(struct bau_desc *bau_desc,
- unsigned long mmr_offset, int right_shift)
+ unsigned long mmr_offset, int right_shift, int this_cpu,
+ struct bau_control *bcp, struct bau_control *smaster, long try)
{
- int exams = 0;
- long destination_timeouts = 0;
- long source_timeouts = 0;
+ int relaxes = 0;
unsigned long descriptor_status;
+ unsigned long mmr;
+ unsigned long mask;
+ cycles_t ttime;
+ cycles_t timeout_time;
+ struct ptc_stats *stat = &per_cpu(ptcstats, this_cpu);
+ struct bau_control *hmaster;
+ hmaster = bcp->uvhub_master;
+ timeout_time = get_cycles() + bcp->timeout_interval;
+
+ /* spin on the status MMR, waiting for it to go idle */
while ((descriptor_status = (((unsigned long)
uv_read_local_mmr(mmr_offset) >>
right_shift) & UV_ACT_STATUS_MASK)) !=
DESC_STATUS_IDLE) {
- if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
- source_timeouts++;
- if (source_timeouts > SOURCE_TIMEOUT_LIMIT)
- source_timeouts = 0;
- __get_cpu_var(ptcstats).s_retry++;
- return FLUSH_RETRY;
- }
/*
- * spin here looking for progress at the destinations
+ * Our software ack messages may be blocked because there are
+ * no swack resources available. As long as none of them
+ * has timed out hardware will NACK our message and its
+ * state will stay IDLE.
*/
- if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) {
- destination_timeouts++;
- if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) {
- /*
- * returns number of cpus not responding
- */
- if (uv_examine_destinations
- (&bau_desc->distribution) == 0) {
- __get_cpu_var(ptcstats).d_retry++;
- return FLUSH_RETRY;
- }
- exams++;
- if (exams >= uv_bau_retry_limit) {
- printk(KERN_DEBUG
- "uv_flush_tlb_others");
- printk("giving up on cpu %d\n",
- smp_processor_id());
+ if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
+ stat->s_stimeout++;
+ return FLUSH_GIVEUP;
+ } else if (descriptor_status ==
+ DESC_STATUS_DESTINATION_TIMEOUT) {
+ stat->s_dtimeout++;
+ ttime = get_cycles();
+
+ /*
+ * Our retries may be blocked by all destination
+ * swack resources being consumed, and a timeout
+ * pending. In that case hardware returns the
+ * ERROR that looks like a destination timeout.
+ */
+ if (cycles_2_us(ttime - bcp->send_message) < BIOS_TO) {
+ bcp->conseccompletes = 0;
+ return FLUSH_RETRY_PLUGGED;
+ }
+
+ bcp->conseccompletes = 0;
+ return FLUSH_RETRY_TIMEOUT;
+ } else {
+ /*
+ * descriptor_status is still BUSY
+ */
+ cpu_relax();
+ relaxes++;
+ if (relaxes >= 10000) {
+ relaxes = 0;
+ if (get_cycles() > timeout_time) {
+ quiesce_local_uvhub(hmaster);
+
+ /* single-thread the register change */
+ spin_lock(&hmaster->masks_lock);
+ mmr = uv_read_local_mmr(mmr_offset);
+ mask = 0UL;
+ mask |= (3UL < right_shift);
+ mask = ~mask;
+ mmr &= mask;
+ uv_write_local_mmr(mmr_offset, mmr);
+ spin_unlock(&hmaster->masks_lock);
+ end_uvhub_quiesce(hmaster);
+ stat->s_busy++;
return FLUSH_GIVEUP;
}
- /*
- * delays can hang the simulator
- udelay(1000);
- */
- destination_timeouts = 0;
}
}
- cpu_relax();
}
+ bcp->conseccompletes++;
return FLUSH_COMPLETE;
}
+static inline cycles_t
+sec_2_cycles(unsigned long sec)
+{
+ unsigned long ns;
+ cycles_t cyc;
+
+ ns = sec * 1000000000;
+ cyc = (ns << CYC2NS_SCALE_FACTOR)/(per_cpu(cyc2ns, smp_processor_id()));
+ return cyc;
+}
+
+/*
+ * conditionally add 1 to *v, unless *v is >= u
+ * return 0 if we cannot add 1 to *v because it is >= u
+ * return 1 if we can add 1 to *v because it is < u
+ * the add is atomic
+ *
+ * This is close to atomic_add_unless(), but this allows the 'u' value
+ * to be lowered below the current 'v'. atomic_add_unless can only stop
+ * on equal.
+ */
+static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u)
+{
+ spin_lock(lock);
+ if (atomic_read(v) >= u) {
+ spin_unlock(lock);
+ return 0;
+ }
+ atomic_inc(v);
+ spin_unlock(lock);
+ return 1;
+}
+
/**
* uv_flush_send_and_wait
*
- * Send a broadcast and wait for a broadcast message to complete.
+ * Send a broadcast and wait for it to complete.
*
- * The flush_mask contains the cpus the broadcast was sent to.
+ * The flush_mask contains the cpus the broadcast is to be sent to, plus
+ * cpus that are on the local uvhub.
*
- * Returns NULL if all remote flushing was done. The mask is zeroed.
+ * Returns NULL if all flushing represented in the mask was done. The mask
+ * is zeroed.
* Returns @flush_mask if some remote flushing remains to be done. The
- * mask will have some bits still set.
+ * mask will have some bits still set, representing any cpus on the local
+ * uvhub (not current cpu) and any on remote uvhubs if the broadcast failed.
*/
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
- struct bau_desc *bau_desc,
- struct cpumask *flush_mask)
+const struct cpumask *uv_flush_send_and_wait(struct bau_desc *bau_desc,
+ struct cpumask *flush_mask,
+ struct bau_control *bcp)
{
- int completion_status = 0;
int right_shift;
- int tries = 0;
- int pnode;
+ int uvhub;
int bit;
+ int completion_status = 0;
+ int seq_number = 0;
+ long try = 0;
+ int cpu = bcp->uvhub_cpu;
+ int this_cpu = bcp->cpu;
+ int this_uvhub = bcp->uvhub;
unsigned long mmr_offset;
unsigned long index;
cycles_t time1;
cycles_t time2;
+ struct ptc_stats *stat = &per_cpu(ptcstats, bcp->cpu);
+ struct bau_control *smaster = bcp->socket_master;
+ struct bau_control *hmaster = bcp->uvhub_master;
+
+ /*
+ * Spin here while there are hmaster->max_concurrent or more active
+ * descriptors. This is the per-uvhub 'throttle'.
+ */
+ if (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
+ &hmaster->active_descriptor_count,
+ hmaster->max_concurrent)) {
+ stat->s_throttles++;
+ do {
+ cpu_relax();
+ } while (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
+ &hmaster->active_descriptor_count,
+ hmaster->max_concurrent));
+ }
+
+ while (hmaster->uvhub_quiesce)
+ cpu_relax();
if (cpu < UV_CPUS_PER_ACT_STATUS) {
mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
@@ -269,24 +556,108 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
}
time1 = get_cycles();
do {
- tries++;
+ /*
+ * Every message from any given cpu gets a unique message
+ * sequence number. But retries use that same number.
+ * Our message may have timed out at the destination because
+ * all sw-ack resources are in use and there is a timeout
+ * pending there. In that case, our last send never got
+ * placed into the queue and we need to persist until it
+ * does.
+ *
+ * Make any retry a type MSG_RETRY so that the destination will
+ * free any resource held by a previous message from this cpu.
+ */
+ if (try == 0) {
+ /* use message type set by the caller the first time */
+ seq_number = bcp->message_number++;
+ } else {
+ /* use RETRY type on all the rest; same sequence */
+ bau_desc->header.msg_type = MSG_RETRY;
+ stat->s_retry_messages++;
+ }
+ bau_desc->header.sequence = seq_number;
index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) |
- cpu;
+ bcp->uvhub_cpu;
+ bcp->send_message = get_cycles();
+
uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
+
+ try++;
completion_status = uv_wait_completion(bau_desc, mmr_offset,
- right_shift);
- } while (completion_status == FLUSH_RETRY);
+ right_shift, this_cpu, bcp, smaster, try);
+
+ if (completion_status == FLUSH_RETRY_PLUGGED) {
+ /*
+ * Our retries may be blocked by all destination swack
+ * resources being consumed, and a timeout pending. In
+ * that case hardware immediately returns the ERROR
+ * that looks like a destination timeout.
+ */
+ udelay(TIMEOUT_DELAY);
+ bcp->plugged_tries++;
+ if (bcp->plugged_tries >= PLUGSB4RESET) {
+ bcp->plugged_tries = 0;
+ quiesce_local_uvhub(hmaster);
+ spin_lock(&hmaster->queue_lock);