diff options
46 files changed, 5602 insertions, 311 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 5fb38d3f142..0c0d829176a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -955,8 +955,9 @@ ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt <lethal@linux-sh.org> M: Magnus Damm <magnus.damm@gmail.com> L: linux-sh@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git W: http://oss.renesas.com +Q: http://patchwork.kernel.org/project/linux-sh/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git S: Supported F: arch/arm/mach-shmobile/ F: drivers/sh/ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4c704b4e8b3..54b479c35ee 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -7,6 +7,7 @@ config ARCH_SH7367 select CPU_V6 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS config ARCH_SH7377 @@ -14,6 +15,7 @@ config ARCH_SH7377 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS config ARCH_SH7372 @@ -21,6 +23,7 @@ config ARCH_SH7372 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS comment "SH-Mobile Board Type" @@ -39,6 +42,20 @@ config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB + select SH_LCD_MIPI_DSI + +choice + prompt "AP4EVB LCD panel selection" + default AP4EVB_QHD + depends on MACH_AP4EVB + +config AP4EVB_QHD + bool "MIPI-DSI QHD (960x540)" + +config AP4EVB_WVGA + bool "Parallel WVGA (800x480)" + +endchoice comment "SH-Mobile System Configuration" @@ -88,6 +105,15 @@ config SH_TIMER_CMT help This enables build of the CMT timer driver. +config SH_TIMER_TMU + bool "TMU timer driver" + default y + help + This enables build of the TMU timer driver. + endmenu +config SH_CLK_CPG + bool + endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6d385d371c3..5e16b4c6922 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,12 +3,12 @@ # # Common objects -obj-y := timer.o console.o +obj-y := timer.o console.o clock.o # CPU objects obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o -obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7367.o intc-sh7377.o -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7367.o intc-sh7372.o +obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o # Pinmux setup pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1c2ec96ce26..23d472f9525 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -17,25 +17,45 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/host.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/sh_intc.h> +#include <linux/sh_clk.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/usb/r8a66597.h> + +#include <sound/sh_fsi.h> + +#include <video/sh_mobile_hdmi.h> +#include <video/sh_mobile_lcdc.h> +#include <video/sh_mipi_dsi.h> + #include <mach/common.h> +#include <mach/irqs.h> #include <mach/sh7372.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> /* * Address Interface BusWidth note @@ -80,12 +100,56 @@ */ /* - * KEYSC + * LCD / IRQ / KEYSC / IrDA + * + * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen) + * LCD = 2nd LCDC (WVGA) * - * SW43 KEYSC - * ------------------------- - * ON enable - * OFF disable + * | SW43 | + * SW3 | ON | OFF | + * -------------+-----------------------+---------------+ + * ON | KEY / IrDA | LCD | + * OFF | KEY / IrDA / IRQ | IRQ | + * + * + * QHD / WVGA display + * + * You can choice display type on menuconfig. + * Then, check above dip-switch. + */ + +/* + * USB + * + * J7 : 1-2 MAX3355E VBUS + * 2-3 DC 5.0V + * + * S39: bit2: off + */ + +/* + * FSI/FSMI + * + * SW41 : ON : SH-Mobile AP4 Audio Mode + * : OFF : Bluetooth Audio Mode + */ + +/* + * MMC0/SDHI1 (CN7) + * + * J22 : select card voltage + * 1-2 pin : 1.8v + * 2-3 pin : 3.3v + * + * SW1 | SW33 + * | bit1 | bit2 | bit3 | bit4 + * ------------+------+------+------+------- + * MMC0 OFF | OFF | ON | ON | X + * SDHI1 OFF | ON | X | OFF | ON + * + * voltage lebel + * CN7 : 1.8v + * CN12: 3.3v */ /* MTD */ @@ -148,7 +212,7 @@ static struct resource smc911x_resources[] = { .end = 0x16000000 - 1, .flags = IORESOURCE_MEM, }, { - .start = 6, + .start = evt2irq(0x02c0) /* IRQ6A */, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -169,6 +233,180 @@ static struct platform_device smc911x_device = { }, }; +/* SH_MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "SH_MMCIF", + .start = 0xE6BD0000, + .end = 0xE6BD00FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC ERR */ + .start = evt2irq(0x1ac0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC NOR */ + .start = evt2irq(0x1ae0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + +/* SDHI0 */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xe6850000, + .end = 0xe68501ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e00) /* SDHI0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +/* SDHI1 */ +static struct sh_mobile_sdhi_info sdhi1_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_ocr_mask = MMC_VDD_165_195, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xe6860000, + .end = 0xe68601ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, + .dev = { + .platform_data = &sdhi1_info, + }, +}; + +/* USB1 */ +static void usb1_host_port_power(int port, int power) +{ + if (!power) /* only power-on supported for now */ + return; + + /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ + __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); +} + +static struct r8a66597_platdata usb1_host_data = { + .on_chip = 1, + .port_power = usb1_host_port_power, +}; + +static struct resource usb1_host_resources[] = { + [0] = { + .name = "USBHS", + .start = 0xE68B0000, + .end = 0xE68B00E6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb1_host_device = { + .name = "r8a66597_hcd", + .id = 1, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usb1_host_data, + }, + .num_resources = ARRAY_SIZE(usb1_host_resources), + .resource = usb1_host_resources, +}; + +static struct sh_mobile_lcdc_info lcdc_info = { + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + +/* + * QHD display + */ +#ifdef CONFIG_AP4EVB_QHD + /* KEYSC (Needs SW43 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, @@ -191,7 +429,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0x0be0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -206,32 +444,362 @@ static struct platform_device keysc_device = { }, }; -/* SDHI0 */ -static struct resource sdhi0_resources[] = { +/* MIPI-DSI */ +static struct resource mipidsi0_resources[] = { [0] = { - .name = "SDHI0", - .start = 0xe6850000, - .end = 0xe68501ff, + .start = 0xffc60000, + .end = 0xffc68fff, .flags = IORESOURCE_MEM, }, +}; + +static struct sh_mipi_dsi_info mipidsi0_info = { + .data_format = MIPI_RGB888, + .lcd_chan = &lcdc_info.ch[0], +}; + +static struct platform_device mipidsi0_device = { + .name = "sh-mipi-dsi", + .num_resources = ARRAY_SIZE(mipidsi0_resources), + .resource = mipidsi0_resources, + .id = 0, + .dev = { + .platform_data = &mipidsi0_info, + }, +}; + +/* This function will disappear when we switch to (runtime) PM */ +static int __init ap4evb_init_display_clk(void) +{ + struct clk *lcdc_clk; + struct clk *dsitx_clk; + int ret; + + lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0"); + if (IS_ERR(lcdc_clk)) + return PTR_ERR(lcdc_clk); + + dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0"); + if (IS_ERR(dsitx_clk)) { + ret = PTR_ERR(dsitx_clk); + goto eclkdsitxget; + } + + ret = clk_enable(lcdc_clk); + if (ret < 0) + goto eclklcdcon; + + ret = clk_enable(dsitx_clk); + if (ret < 0) + goto eclkdsitxon; + + return 0; + +eclkdsitxon: + clk_disable(lcdc_clk); +eclklcdcon: + clk_put(dsitx_clk); +eclkdsitxget: + clk_put(lcdc_clk); + + return ret; +} +device_initcall(ap4evb_init_display_clk); + +static struct platform_device *qhd_devices[] __initdata = { + &mipidsi0_device, + &keysc_device, +}; +#endif /* CONFIG_AP4EVB_QHD */ + +/* FSI */ +#define IRQ_FSI evt2irq(0x1840) +#define FSIACKCR 0xE6150018 +static void fsiackcr_init(struct clk *clk) +{ + u32 status = __raw_readl(clk->enable_reg); + + /* use external clock */ + status &= ~0x000000ff; + status |= 0x00000080; + __raw_writel(status, clk->enable_reg); +} + +static struct clk_ops fsiackcr_clk_ops = { + .init = fsiackcr_init, +}; + +static struct clk fsiackcr_clk = { + .ops = &fsiackcr_clk_ops, + .enable_reg = (void __iomem *)FSIACKCR, + .rate = 0, /* unknown */ +}; + +static struct sh_fsi_platform_info fsi_info = { + .porta_flags = SH_FSI_BRS_INV | + SH_FSI_OUT_SLAVE_MODE | + SH_FSI_IN_SLAVE_MODE | + SH_FSI_OFMT(PCM) | + SH_FSI_IFMT(PCM), +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xFE3C0000, + .end = 0xFE3C0400 - 1, + .flags = IORESOURCE_MEM, + }, [1] = { - .start = 96, + .start = IRQ_FSI, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = 0, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_cfg = { + .name = "HDMI", + /* So far only 720p is supported */ + .xres = 1280, + .yres = 720, + /* + * If left and right margins are not multiples of 8, + * LDHAJR will be adjusted accordingly by the LCDC + * driver. Until we start using EDID, these values + * might have to be adjusted for different monitors. + */ + .left_margin = 200, + .right_margin = 88, + .hsync_len = 48, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .pixclock = 13468, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, + } +}; + +static struct resource lcdc1_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe947fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x17a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc1_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc1_resources), + .resource = lcdc1_resources, + .id = 1, + .dev = { + .platform_data = &sh_mobile_lcdc1_info, + .coherent_dma_mask = ~0, + }, +}; + +static struct sh_mobile_hdmi_info hdmi_info = { + .lcd_chan = &sh_mobile_lcdc1_info.ch[0], + .lcd_dev = &lcdc1_device.dev, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ + .start = evt2irq(0x17e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, }; static struct platform_device *ap4evb_devices[] __initdata = { &nor_flash_device, &smc911x_device, - &keysc_device, &sdhi0_device, + &sdhi1_device, + &usb1_host_device, + &fsi_device, + &sh_mmcif_device, + &lcdc1_device, + &lcdc_device, + &hdmi_device, +}; + +static int __init hdmi_init_pm_clock(void) +{ + struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); + int ret; + long rate; + + if (IS_ERR(hdmi_ick)) { + ret = PTR_ERR(hdmi_ick); + pr_err("Cannot get HDMI ICK: %d\n", ret); + goto out; + } + + ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk); + if (ret < 0) { + pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount); + goto out; + } + + pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk)); + + rate = clk_round_rate(&pllc2_clk, 594000000); + if (rate < 0) { + pr_err("Cannot get suitable rate: %ld\n", rate); + ret = rate; + goto out; + } + + ret = clk_set_rate(&pllc2_clk, rate); + if (ret < 0) { + pr_err("Cannot set rate %ld: %d\n", rate, ret); + goto out; + } + + pr_debug("PLLC2 set frequency %lu\n", rate); + + ret = clk_set_parent(hdmi_ick, &pllc2_clk); + if (ret < 0) { + pr_err("Cannot set HDMI parent: %d\n", ret); + goto out; + } + +out: + if (!IS_ERR(hdmi_ick)) + clk_put(hdmi_ick); + return ret; +} + +device_initcall(hdmi_init_pm_clock); + +/* + * FIXME !! + * + * gpio_no_direction + * gpio_pull_up + * are quick_hack. + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static void __init gpio_no_direction(u32 addr) +{ + __raw_writeb(0x00, addr); +} + +static void __init gpio_pull_up(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xC0; + __raw_writeb(data, addr); +} + +/* TouchScreen */ +#define IRQ28 evt2irq(0x3380) /* IRQ28A */ +#define IRQ7 evt2irq(0x02e0) /* IRQ7A */ +static int ts_get_pendown_state(void) +{ + int val1, val2; + + gpio_free(GPIO_FN_IRQ28_123); + gpio_free(GPIO_FN_IRQ7_40); + + gpio_request(GPIO_PORT123, NULL); + gpio_request(GPIO_PORT40, NULL); + + gpio_direction_input(GPIO_PORT123); + gpio_direction_input(GPIO_PORT40); + + val1 = gpio_get_value(GPIO_PORT123); + val2 = gpio_get_value(GPIO_PORT40); + + gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ + gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ + + return val1 ^ val2; +} + +#define PORT40CR 0xE6051028 +#define PORT123CR 0xE605007B +static int ts_init(void) +{ + gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ + gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ + + gpio_pull_up(PORT40CR); + gpio_pull_up(PORT123CR); + + return 0; +} + +static struct tsc2007_platform_data tsc2007_info = { + .model = 2007, + .x_plate_ohms = 180, + .get_pendown_state = ts_get_pendown_state, + .init_platform_hw = ts_init, +}; + +static struct i2c_board_info tsc_device = { + I2C_BOARD_INFO("tsc2007", 0x48), + .type = "tsc2007", + .platform_data = &tsc2007_info, + /*.irq is selected on ap4evb_init */ +}; + +/* I2C */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("ak4643", 0x13), + }, +}; + +static struct i2c_board_info i2c1_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, }; static struct map_desc ap4evb_io_desc[] __initdata = { @@ -250,14 +818,18 @@ static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7372_add_early_devices(); - sh7367_clock_init(); /* use g3 clocks for now */ shmobile_setup_console(); } +#define GPIO_PORT9CR 0xE6051009 +#define GPIO_PORT10CR 0xE605100A static void __init ap4evb_init(void) { + u32 srcr4; + struct clk *clk; + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -296,6 +868,93 @@ static void __init ap4evb_init(void) gpio_export(GPIO_PORT34, 0); gpio_export(GPIO_PORT35, 0); + /* SDHI0 */ + gpio_request(GPIO_FN_SDHICD0, NULL); + gpio_request(GPIO_FN_SDHIWP0, NULL); + gpio_request(GPIO_FN_SDHICMD0, NULL); + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHID0_3, NULL); + gpio_request(GPIO_FN_SDHID0_2, NULL); + gpio_request(GPIO_FN_SDHID0_1, NULL); + gpio_request(GPIO_FN_SDHID0_0, NULL); + + /* SDHI1 */ + gpio_request(GPIO_FN_SDHICMD1, NULL); + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHID1_3, NULL); + gpio_request(GPIO_FN_SDHID1_2, NULL); + gpio_request(GPIO_FN_SDHID1_1, NULL); + gpio_request(GPIO_FN_SDHID1_0, NULL); + + /* MMCIF */ + gpio_request(GPIO_FN_MMCD0_0, NULL); + gpio_request(GPIO_FN_MMCD0_1, NULL); + gpio_request(GPIO_FN_MMCD0_2, NULL); + gpio_request(GPIO_FN_MMCD0_3, NULL); + gpio_request(GPIO_FN_MMCD0_4, NULL); + gpio_request(GPIO_FN_MMCD0_5, NULL); + gpio_request(GPIO_FN_MMCD0_6, NULL); + gpio_request(GPIO_FN_MMCD0_7, NULL); + gpio_request(GPIO_FN_MMCCMD0, NULL); + gpio_request(GPIO_FN_MMCCLK0, NULL); + + /* USB enable */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_request(GPIO_FN_IDIN_1_18, NULL); + gpio_request(GPIO_FN_PWEN_1_115, NULL); + gpio_request(GPIO_FN_OVCN_1_114, NULL); + gpio_request(GPIO_FN_EXTLP_1, NULL); + gpio_request(GPIO_FN_OVCN2_1, NULL); + + /* setup USB phy */ + __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ + + /* enable FSI2 */ + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAISLD, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + gpio_request(GPIO_PORT161, NULL); + gpio_direction_output(GPIO_PORT161, 0); /* slave */ + + gpio_request(GPIO_PORT9, NULL); + gpio_request(GPIO_PORT10, NULL); + gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + + /* set SPU2 clock to 119.6 MHz */ + clk = clk_get(NULL, "spu_clk"); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 119600000)); + clk_put(clk); + } + + /* change parent of FSI A */ + clk = clk_get(NULL, "fsia_clk"); + if (!IS_ERR(clk)) { + clk_register(&fsiackcr_clk); + clk_set_parent(clk, &fsiackcr_clk); |