diff options
| -rw-r--r-- | arch/arm/mach-iop32x/Kconfig | 4 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/iq31244.c | 59 |
2 files changed, 55 insertions, 8 deletions
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index c072d94070d..9dd49cff21f 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -4,6 +4,9 @@ menu "IOP32x Implementation Options" comment "IOP32x Platform Types" +config MACH_EP80219 + bool + config MACH_GLANTANK bool "Enable support for the IO-Data GLAN Tank" help @@ -19,6 +22,7 @@ config ARCH_IQ80321 config ARCH_IQ31244 bool "Enable support for EP80219/IQ31244" + select MACH_EP80219 help Say Y here if you want to run your kernel on the Intel EP80219 evaluation kit for the Intel 80219 processor (a IOP321 variant) diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 571ac35bc2c..60e74309a45 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -39,22 +39,35 @@ #include <asm/arch/time.h> /* - * The EP80219 and IQ31244 use the same machine ID. To find out - * which of the two we're running on, we look at the processor ID. + * Until March of 2007 iq31244 platforms and ep80219 platforms shared the + * same machine id, and the processor type was used to select board type. + * However this assumption breaks for an iq80219 board which is an iop219 + * processor on an iq31244 board. The force_ep80219 flag has been added + * for old boot loaders using the iq31244 machine id for an ep80219 platform. */ +static int force_ep80219; + static int is_80219(void) { extern int processor_id; return !!((processor_id & 0xffffffe0) == 0x69052e20); } +static int is_ep80219(void) +{ + if (machine_is_ep80219() || force_ep80219) + return 1; + else + return 0; +} + /* * EP80219/IQ31244 timer tick configuration. */ static void __init iq31244_timer_init(void) { - if (is_80219()) { + if (is_ep80219()) { /* 33.333 MHz crystal. */ iop_init_time(200000000); } else { @@ -165,12 +178,18 @@ static struct hw_pci iq31244_pci __initdata = { static int __init iq31244_pci_init(void) { - if (machine_is_iq31244()) { + if (is_ep80219()) + pci_common_init(&ep80219_pci); + else if (machine_is_iq31244()) { if (is_80219()) { - pci_common_init(&ep80219_pci); - } else { - pci_common_init(&iq31244_pci); + printk("note: iq31244 board type has been selected\n"); + printk("note: to select ep80219 operation:\n"); + printk("\t1/ specify \"force_ep80219\" on the kernel" + " command line\n"); + printk("\t2/ update boot loader to pass" + " the ep80219 id: %d\n", MACH_TYPE_EP80219); } + pci_common_init(&iq31244_pci); } return 0; @@ -277,10 +296,18 @@ static void __init iq31244_init_machine(void) platform_device_register(&iq31244_flash_device); platform_device_register(&iq31244_serial_device); - if (is_80219()) + if (is_ep80219()) pm_power_off = ep80219_power_off; } +static int __init force_ep80219_setup(char *str) +{ + force_ep80219 = 1; + return 1; +} + +__setup("force_ep80219", force_ep80219_setup); + MACHINE_START(IQ31244, "Intel IQ31244") /* Maintainer: Intel Corp. */ .phys_io = IQ31244_UART, @@ -291,3 +318,19 @@ MACHINE_START(IQ31244, "Intel IQ31244") .timer = &iq31244_timer, .init_machine = iq31244_init_machine, MACHINE_END + +/* There should have been an ep80219 machine identifier from the beginning. + * Boot roms older than March 2007 do not know the ep80219 machine id. Pass + * "force_ep80219" on the kernel command line, otherwise iq31244 operation + * will be selected. + */ +MACHINE_START(EP80219, "Intel EP80219") + /* Maintainer: Intel Corp. */ + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = iq31244_map_io, + .init_irq = iop32x_init_irq, + .timer = &iq31244_timer, + .init_machine = iq31244_init_machine, +MACHINE_END |