diff options
-rw-r--r-- | drivers/net/wireless/ath/ath6kl/cfg80211.c | 19 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/scan.c | 3 | ||||
-rw-r--r-- | include/net/cfg80211.h | 9 | ||||
-rw-r--r-- | include/uapi/linux/nl80211.h | 10 | ||||
-rw-r--r-- | net/wireless/nl80211.c | 70 |
5 files changed, 92 insertions, 19 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index fd4c89df67e..eba32f56850 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -3256,6 +3256,15 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy, struct ath6kl_vif *vif = netdev_priv(dev); u16 interval; int ret, rssi_thold; + int n_match_sets = request->n_match_sets; + + /* + * If there's a matchset w/o an SSID, then assume it's just for + * the RSSI (nothing else is currently supported) and ignore it. + * The device only supports a global RSSI filter that we set below. + */ + if (n_match_sets == 1 && !request->match_sets[0].ssid.ssid_len) + n_match_sets = 0; if (ar->state != ATH6KL_STATE_ON) return -EIO; @@ -3268,11 +3277,11 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy, ret = ath6kl_set_probed_ssids(ar, vif, request->ssids, request->n_ssids, request->match_sets, - request->n_match_sets); + n_match_sets); if (ret < 0) return ret; - if (!request->n_match_sets) { + if (!n_match_sets) { ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx, ALL_BSS_FILTER, 0); if (ret < 0) @@ -3286,12 +3295,12 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy, if (test_bit(ATH6KL_FW_CAPABILITY_RSSI_SCAN_THOLD, ar->fw_capabilities)) { - if (request->rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF) + if (request->min_rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF) rssi_thold = 0; - else if (request->rssi_thold < -127) + else if (request->min_rssi_thold < -127) rssi_thold = -127; else - rssi_thold = request->rssi_thold; + rssi_thold = request->min_rssi_thold; ret = ath6kl_wmi_set_rssi_filter_cmd(ar->wmi, vif->fw_vif_idx, rssi_thold); diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 0e000796061..9674bfd978f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -595,6 +595,9 @@ static void iwl_scan_offload_build_ssid(struct cfg80211_sched_scan_request *req, * config match list. */ for (i = 0; i < req->n_match_sets && i < PROBE_OPTION_MAX; i++) { + /* skip empty SSID matchsets */ + if (!req->match_sets[i].ssid.ssid_len) + continue; scan->direct_scan[i].id = WLAN_EID_SSID; scan->direct_scan[i].len = req->match_sets[i].ssid.ssid_len; memcpy(scan->direct_scan[i].ssid, req->match_sets[i].ssid.ssid, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d5e57bf678a..009290e36d1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1394,10 +1394,12 @@ struct cfg80211_scan_request { /** * struct cfg80211_match_set - sets of attributes to match * - * @ssid: SSID to be matched + * @ssid: SSID to be matched; may be zero-length for no match (RSSI only) + * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ struct cfg80211_match_set { struct cfg80211_ssid ssid; + s32 rssi_thold; }; /** @@ -1420,7 +1422,8 @@ struct cfg80211_match_set { * @dev: the interface * @scan_start: start time of the scheduled scan * @channels: channels to scan - * @rssi_thold: don't report scan results below this threshold (in s32 dBm) + * @min_rssi_thold: for drivers only supporting a single threshold, this + * contains the minimum over all matchsets */ struct cfg80211_sched_scan_request { struct cfg80211_ssid *ssids; @@ -1433,7 +1436,7 @@ struct cfg80211_sched_scan_request { u32 flags; struct cfg80211_match_set *match_sets; int n_match_sets; - s32 rssi_thold; + s32 min_rssi_thold; /* internal */ struct wiphy *wiphy; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 53e56cf7c0f..474ce32e079 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2467,9 +2467,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. + * only report BSS with matching SSID. * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a - * BSS in scan results. Filtering is turned off if not specified. + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 043bfbd58b5..20be186f7f7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5467,6 +5467,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, enum ieee80211_band band; size_t ie_len; struct nlattr *tb[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1]; + s32 default_match_rssi = NL80211_SCAN_RSSI_THOLD_OFF; if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) || !rdev->ops->sched_scan_start) @@ -5501,11 +5502,40 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, if (n_ssids > wiphy->max_sched_scan_ssids) return -EINVAL; - if (info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) + /* + * First, count the number of 'real' matchsets. Due to an issue with + * the old implementation, matchsets containing only the RSSI attribute + * (NL80211_SCHED_SCAN_MATCH_ATTR_RSSI) are considered as the 'default' + * RSSI for all matchsets, rather than their own matchset for reporting + * all APs with a strong RSSI. This is needed to be compatible with + * older userspace that treated a matchset with only the RSSI as the + * global RSSI for all other matchsets - if there are other matchsets. + */ + if (info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) { nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH], - tmp) - n_match_sets++; + tmp) { + struct nlattr *rssi; + + err = nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX, + nla_data(attr), nla_len(attr), + nl80211_match_policy); + if (err) + return err; + /* add other standalone attributes here */ + if (tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]) { + n_match_sets++; + continue; + } + rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; + if (rssi) + default_match_rssi = nla_get_s32(rssi); + } + } + + /* However, if there's no other matchset, add the RSSI one */ + if (!n_match_sets && default_match_rssi != NL80211_SCAN_RSSI_THOLD_OFF) + n_match_sets = 1; if (n_match_sets > wiphy->max_match_sets) return -EINVAL; @@ -5633,6 +5663,15 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, goto out_free; ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]; if (ssid) { + if (WARN_ON(i >= n_match_sets)) { + /* this indicates a programming error, + * the loop above should have verified + * things properly + */ + err = -EINVAL; + goto out_free; + } + if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; goto out_free; @@ -5641,15 +5680,28 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, nla_data(ssid), nla_len(ssid)); request->match_sets[i].ssid.ssid_len = nla_len(ssid); + /* special attribute - old implemenation w/a */ + request->match_sets[i].rssi_thold = + default_match_rssi; + rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; + if (rssi) + request->match_sets[i].rssi_thold = + nla_get_s32(rssi); } - rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; - if (rssi) - request->rssi_thold = nla_get_u32(rssi); - else - request->rssi_thold = - NL80211_SCAN_RSSI_THOLD_OFF; i++; } + + /* there was no other matchset, so the RSSI one is alone */ + if (i == 0) + request->match_sets[0].rssi_thold = default_match_rssi; + + request->min_rssi_thold = INT_MAX; + for (i = 0; i < n_match_sets; i++) + request->min_rssi_thold = + min(request->match_sets[i].rssi_thold, + request->min_rssi_thold); + } else { + request->min_rssi_thold = NL80211_SCAN_RSSI_THOLD_OFF; } if (info->attrs[NL80211_ATTR_IE]) { |