diff options
-rw-r--r-- | drivers/net/sky2.c | 123 | ||||
-rw-r--r-- | drivers/net/sky2.h | 2 |
2 files changed, 43 insertions, 82 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7ce0663baf4..a3a4ab26044 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -289,7 +289,7 @@ static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) static void sky2_phy_init(struct sky2_hw *hw, unsigned port) { struct sky2_port *sky2 = netdev_priv(hw->dev[port]); - u16 ctrl, ct1000, adv, pg, ledctrl, ledover; + u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; if (sky2->autoneg == AUTONEG_ENABLE && !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) { @@ -358,6 +358,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ctrl = 0; ct1000 = 0; adv = PHY_AN_CSMA; + reg = 0; if (sky2->autoneg == AUTONEG_ENABLE) { if (hw->copper) { @@ -390,21 +391,46 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* forced speed/duplex settings */ ct1000 = PHY_M_1000C_MSE; - if (sky2->duplex == DUPLEX_FULL) - ctrl |= PHY_CT_DUP_MD; + /* Disable auto update for duplex flow control and speed */ + reg |= GM_GPCR_AU_ALL_DIS; switch (sky2->speed) { case SPEED_1000: ctrl |= PHY_CT_SP1000; + reg |= GM_GPCR_SPEED_1000; break; case SPEED_100: ctrl |= PHY_CT_SP100; + reg |= GM_GPCR_SPEED_100; break; } + if (sky2->duplex == DUPLEX_FULL) { + reg |= GM_GPCR_DUP_FULL; + ctrl |= PHY_CT_DUP_MD; + } else if (sky2->speed != SPEED_1000 && hw->chip_id != CHIP_ID_YUKON_EC_U) { + /* Turn off flow control for 10/100mbps */ + sky2->rx_pause = 0; + sky2->tx_pause = 0; + } + + if (!sky2->rx_pause) + reg |= GM_GPCR_FC_RX_DIS; + + if (!sky2->tx_pause) + reg |= GM_GPCR_FC_TX_DIS; + + /* Forward pause packets to GMAC? */ + if (sky2->tx_pause || sky2->rx_pause) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + else + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + ctrl |= PHY_CT_RESET; } + gma_write16(hw, port, GM_GP_CTRL, reg); + if (hw->chip_id != CHIP_ID_YUKON_FE) gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); @@ -508,6 +534,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); } + /* Enable phy interrupt on auto-negotiation complete (or link up) */ if (sky2->autoneg == AUTONEG_ENABLE) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); @@ -570,49 +597,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); } - if (sky2->autoneg == AUTONEG_DISABLE) { - reg = gma_read16(hw, port, GM_GP_CTRL); - reg |= GM_GPCR_AU_ALL_DIS; - gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); - - switch (sky2->speed) { - case SPEED_1000: - reg &= ~GM_GPCR_SPEED_100; - reg |= GM_GPCR_SPEED_1000; - break; - case SPEED_100: - reg &= ~GM_GPCR_SPEED_1000; - reg |= GM_GPCR_SPEED_100; - break; - case SPEED_10: - reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100); - break; - } - - if (sky2->duplex == DUPLEX_FULL) - reg |= GM_GPCR_DUP_FULL; - - /* turn off pause in 10/100mbps half duplex */ - else if (sky2->speed != SPEED_1000 && - hw->chip_id != CHIP_ID_YUKON_EC_U) - sky2->tx_pause = sky2->rx_pause = 0; - } else - reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; - - if (!sky2->tx_pause && !sky2->rx_pause) { - sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); - reg |= - GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - } else if (sky2->tx_pause && !sky2->rx_pause) { - /* disable Rx flow-control */ - reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - } - - gma_write16(hw, port, GM_GP_CTRL, reg); - sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); + /* Enable Transmit FIFO Underrun */ + sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); + spin_lock_bh(&sky2->phy_lock); sky2_phy_init(hw, port); spin_unlock_bh(&sky2->phy_lock); @@ -1529,40 +1518,10 @@ static void sky2_link_up(struct sky2_port *sky2) unsigned port = sky2->port; u16 reg; - /* Enable Transmit FIFO Underrun */ - sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); - - reg = gma_read16(hw, port, GM_GP_CTRL); - if (sky2->autoneg == AUTONEG_DISABLE) { - reg |= GM_GPCR_AU_ALL_DIS; - - /* Is write/read necessary? Copied from sky2_mac_init */ - gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); - - switch (sky2->speed) { - case SPEED_1000: - reg &= ~GM_GPCR_SPEED_100; - reg |= GM_GPCR_SPEED_1000; - break; - case SPEED_100: - reg &= ~GM_GPCR_SPEED_1000; - reg |= GM_GPCR_SPEED_100; - break; - case SPEED_10: - reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100); - break; - } - } else - reg &= ~GM_GPCR_AU_ALL_DIS; - - if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE) - reg |= GM_GPCR_DUP_FULL; - /* enable Rx/Tx */ + reg = gma_read16(hw, port, GM_GP_CTRL); reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); @@ -1616,7 +1575,6 @@ static void sky2_link_down(struct sky2_port *sky2) reg = gma_read16(hw, port, GM_GP_CTRL); reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); /* PCI post */ if (sky2->rx_pause && !sky2->tx_pause) { /* restore Asymmetric Pause bit */ @@ -1633,6 +1591,7 @@ static void sky2_link_down(struct sky2_port *sky2) if (netif_msg_link(sky2)) printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name); + sky2_phy_init(hw, port); } @@ -1673,8 +1632,11 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0; sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0; - if ((sky2->tx_pause || sky2->rx_pause) - && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF)) + if (sky2->duplex == DUPLEX_HALF && sky2->speed != SPEED_1000 + && hw->chip_id != CHIP_ID_YUKON_EC_U) + sky2->rx_pause = sky2->tx_pause = 0; + + if (sky2->rx_pause || sky2->tx_pause) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); else sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); @@ -1700,7 +1662,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", sky2->netdev->name, istatus, phystat); - if (istatus & PHY_M_IS_AN_COMPL) { + if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) { if (sky2_autoneg_done(sky2, phystat) == 0) sky2_link_up(sky2); goto out; @@ -2890,7 +2852,6 @@ static int sky2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *ecmd) { struct sky2_port *sky2 = netdev_priv(dev); - int err = 0; sky2->autoneg = ecmd->autoneg; sky2->tx_pause = ecmd->tx_pause != 0; @@ -2898,7 +2859,7 @@ static int sky2_set_pauseparam(struct net_device *dev, sky2_phy_reinit(sky2); - return err; + return 0; } static int sky2_get_coalesce(struct net_device *dev, diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index fa8af9f503e..a27194c874f 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1566,7 +1566,7 @@ enum { GMR_FS_ANY_ERR = GMR_FS_RX_FF_OV | GMR_FS_CRC_ERR | GMR_FS_FRAGMENT | GMR_FS_LONG_ERR | - GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | + GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_UN_SIZE | GMR_FS_JABBER, }; |