aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget81
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-acm8
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-ecm16
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-eem14
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-ncm15
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-obex9
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-phonet8
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-rndis14
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-serial9
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-subset14
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb27
-rw-r--r--Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc19
-rw-r--r--Documentation/devicetree/bindings/usb/ci13xxx-imx.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt27
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt41
-rw-r--r--Documentation/devicetree/bindings/usb/usb3503.txt5
-rw-r--r--Documentation/usb/gadget_configfs.txt384
-rw-r--r--arch/arm/boot/dts/tegra20-colibri-512.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra20-harmony.dts15
-rw-r--r--arch/arm/boot/dts/tegra20-iris-512.dts9
-rw-r--r--arch/arm/boot/dts/tegra20-paz00.dts15
-rw-r--r--arch/arm/boot/dts/tegra20-seaboard.dts26
-rw-r--r--arch/arm/boot/dts/tegra20-tamonten.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra20-trimslice.dts25
-rw-r--r--arch/arm/boot/dts/tegra20-ventana.dts15
-rw-r--r--arch/arm/boot/dts/tegra20-whistler.dts28
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi49
-rw-r--r--drivers/staging/serqt_usb2/serqt_usb2.c36
-rw-r--r--drivers/usb/Kconfig69
-rw-r--r--drivers/usb/Makefile1
-rw-r--r--drivers/usb/chipidea/Kconfig6
-rw-r--r--drivers/usb/chipidea/Makefile6
-rw-r--r--drivers/usb/chipidea/bits.h16
-rw-r--r--drivers/usb/chipidea/ci.h51
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.c (renamed from drivers/usb/chipidea/ci13xxx_imx.c)117
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.h (renamed from drivers/usb/chipidea/ci13xxx_imx.h)0
-rw-r--r--drivers/usb/chipidea/ci_hdrc_msm.c (renamed from drivers/usb/chipidea/ci13xxx_msm.c)49
-rw-r--r--drivers/usb/chipidea/ci_hdrc_pci.c (renamed from drivers/usb/chipidea/ci13xxx_pci.c)61
-rw-r--r--drivers/usb/chipidea/core.c109
-rw-r--r--drivers/usb/chipidea/debug.c61
-rw-r--r--drivers/usb/chipidea/debug.h8
-rw-r--r--drivers/usb/chipidea/host.c10
-rw-r--r--drivers/usb/chipidea/host.h4
-rw-r--r--drivers/usb/chipidea/udc.c785
-rw-r--r--drivers/usb/chipidea/udc.h26
-rw-r--r--drivers/usb/chipidea/usbmisc_imx.c15
-rw-r--r--drivers/usb/class/cdc-acm.c52
-rw-r--r--drivers/usb/class/usbtmc.c273
-rw-r--r--drivers/usb/core/devio.c7
-rw-r--r--drivers/usb/core/file.c2
-rw-r--r--drivers/usb/core/hcd.c28
-rw-r--r--drivers/usb/core/hub.c23
-rw-r--r--drivers/usb/core/hub.h2
-rw-r--r--drivers/usb/core/message.c16
-rw-r--r--drivers/usb/core/port.c4
-rw-r--r--drivers/usb/core/sysfs.c54
-rw-r--r--drivers/usb/core/usb.c33
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c251
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c1
-rw-r--r--drivers/usb/gadget/Kconfig176
-rw-r--r--drivers/usb/gadget/Makefile16
-rw-r--r--drivers/usb/gadget/cdc2.c85
-rw-r--r--drivers/usb/gadget/ether.c180
-rw-r--r--drivers/usb/gadget/f_ecm.c197
-rw-r--r--drivers/usb/gadget/f_eem.c195
-rw-r--r--drivers/usb/gadget/f_mass_storage.c6
-rw-r--r--drivers/usb/gadget/f_ncm.c220
-rw-r--r--drivers/usb/gadget/f_obex.c75
-rw-r--r--drivers/usb/gadget/f_phonet.c177
-rw-r--r--drivers/usb/gadget/f_rndis.c245
-rw-r--r--drivers/usb/gadget/f_subset.c181
-rw-r--r--drivers/usb/gadget/f_uac2.c20
-rw-r--r--drivers/usb/gadget/f_uvc.c13
-rw-r--r--drivers/usb/gadget/fotg210-udc.c1219
-rw-r--r--drivers/usb/gadget/fotg210.h253
-rw-r--r--drivers/usb/gadget/fsl_qe_udc.c4
-rw-r--r--drivers/usb/gadget/fusb300_udc.c4
-rw-r--r--drivers/usb/gadget/g_ffs.c18
-rw-r--r--drivers/usb/gadget/m66592-udc.c4
-rw-r--r--drivers/usb/gadget/multi.c18
-rw-r--r--drivers/usb/gadget/mv_u3d_core.c5
-rw-r--r--drivers/usb/gadget/ncm.c58
-rw-r--r--drivers/usb/gadget/nokia.c235
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c1
-rw-r--r--drivers/usb/gadget/r8a66597-udc.c8
-rw-r--r--drivers/usb/gadget/rndis.c18
-rw-r--r--drivers/usb/gadget/rndis.h4
-rw-r--r--drivers/usb/gadget/u_ecm.h36
-rw-r--r--drivers/usb/gadget/u_eem.h36
-rw-r--r--drivers/usb/gadget/u_ether.c232
-rw-r--r--drivers/usb/gadget/u_ether.h166
-rw-r--r--drivers/usb/gadget/u_ether_configfs.h164
-rw-r--r--drivers/usb/gadget/u_gether.h36
-rw-r--r--drivers/usb/gadget/u_ncm.h36
-rw-r--r--drivers/usb/gadget/u_phonet.h14
-rw-r--r--drivers/usb/gadget/u_rndis.h41
-rw-r--r--drivers/usb/gadget/uvc_queue.c16
-rw-r--r--drivers/usb/host/Kconfig24
-rw-r--r--drivers/usb/host/Makefile6
-rw-r--r--drivers/usb/host/ehci-atmel.c8
-rw-r--r--drivers/usb/host/ehci-fsl.c1
-rw-r--r--drivers/usb/host/ehci-grlib.c6
-rw-r--r--drivers/usb/host/ehci-hcd.c22
-rw-r--r--drivers/usb/host/ehci-hub.c20
-rw-r--r--drivers/usb/host/ehci-mv.c16
-rw-r--r--drivers/usb/host/ehci-mxc.c1
-rw-r--r--drivers/usb/host/ehci-octeon.c2
-rw-r--r--drivers/usb/host/ehci-omap.c13
-rw-r--r--drivers/usb/host/ehci-orion.c2
-rw-r--r--drivers/usb/host/ehci-platform.c3
-rw-r--r--drivers/usb/host/ehci-pmcmsp.c3
-rw-r--r--drivers/usb/host/ehci-ppc-of.c6
-rw-r--r--drivers/usb/host/ehci-s5p.c12
-rw-r--r--drivers/usb/host/ehci-sead3.c1
-rw-r--r--drivers/usb/host/ehci-sh.c1
-rw-r--r--drivers/usb/host/ehci-spear.c6
-rw-r--r--drivers/usb/host/ehci-tegra.c515
-rw-r--r--drivers/usb/host/ehci-tilegx.c1
-rw-r--r--drivers/usb/host/ehci-xilinx-of.c5
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/fhci-sched.c8
-rw-r--r--drivers/usb/host/fhci.h2
-rw-r--r--drivers/usb/host/fusbh200-hcd.c5972
-rw-r--r--drivers/usb/host/fusbh200.h743
-rw-r--r--drivers/usb/host/hwa-hc.c16
-rw-r--r--drivers/usb/host/imx21-hcd.c43
-rw-r--r--drivers/usb/host/isp1760-if.c10
-rw-r--r--drivers/usb/host/ohci-at91.c12
-rw-r--r--drivers/usb/host/ohci-da8xx.c1
-rw-r--r--drivers/usb/host/ohci-hcd.c156
-rw-r--r--drivers/usb/host/ohci-hub.c1
-rw-r--r--drivers/usb/host/ohci-jz4740.c3
-rw-r--r--drivers/usb/host/ohci-nxp.c3
-rw-r--r--drivers/usb/host/ohci-octeon.c2
-rw-r--r--drivers/usb/host/ohci-omap.c1
-rw-r--r--drivers/usb/host/ohci-omap3.c2
-rw-r--r--drivers/usb/host/ohci-pci.c151
-rw-r--r--drivers/usb/host/ohci-platform.c89
-rw-r--r--drivers/usb/host/ohci-ppc-of.c5
-rw-r--r--drivers/usb/host/ohci-pxa27x.c1
-rw-r--r--drivers/usb/host/ohci-q.c6
-rw-r--r--drivers/usb/host/ohci-sm501.c1
-rw-r--r--drivers/usb/host/ohci-spear.c4
-rw-r--r--drivers/usb/host/ohci-tilegx.c1
-rw-r--r--drivers/usb/host/ohci-tmio.c2
-rw-r--r--drivers/usb/host/ohci.h20
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c2
-rw-r--r--drivers/usb/host/pci-quirks.c13
-rw-r--r--drivers/usb/host/pci-quirks.h2
-rw-r--r--drivers/usb/host/uhci-grlib.c6
-rw-r--r--drivers/usb/host/uhci-platform.c5
-rw-r--r--drivers/usb/host/whci/hcd.c2
-rw-r--r--drivers/usb/host/xhci-dbg.c10
-rw-r--r--drivers/usb/host/xhci-ext-caps.h1
-rw-r--r--drivers/usb/host/xhci-hub.c16
-rw-r--r--drivers/usb/host/xhci-mem.c98
-rw-r--r--drivers/usb/host/xhci-plat.c3
-rw-r--r--drivers/usb/host/xhci-ring.c6
-rw-r--r--drivers/usb/host/xhci.c399
-rw-r--r--drivers/usb/host/xhci.h32
-rw-r--r--drivers/usb/misc/adutux.c141
-rw-r--r--drivers/usb/misc/usb3503.c41
-rw-r--r--drivers/usb/musb/Kconfig29
-rw-r--r--drivers/usb/musb/Makefile4
-rw-r--r--drivers/usb/musb/blackfin.c18
-rw-r--r--drivers/usb/musb/da8xx.c18
-rw-r--r--drivers/usb/musb/davinci.c18
-rw-r--r--drivers/usb/musb/musb_core.c137
-rw-r--r--drivers/usb/musb/musb_core.h27
-rw-r--r--drivers/usb/musb/musb_gadget.c10
-rw-r--r--drivers/usb/musb/musb_gadget.h38
-rw-r--r--drivers/usb/musb/musb_host.c99
-rw-r--r--drivers/usb/musb/musb_host.h57
-rw-r--r--drivers/usb/musb/musb_virthub.c54
-rw-r--r--drivers/usb/musb/omap2430.c20
-rw-r--r--drivers/usb/musb/tusb6010.c18
-rw-r--r--drivers/usb/musb/ux500.c18
-rw-r--r--drivers/usb/musb/ux500_dma.c6
-rw-r--r--drivers/usb/phy/Kconfig2
-rw-r--r--drivers/usb/phy/Makefile1
-rw-r--r--drivers/usb/phy/of.c47
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c846
-rw-r--r--drivers/usb/phy/phy-nop.c2
-rw-r--r--drivers/usb/phy/phy-omap-usb3.c7
-rw-r--r--drivers/usb/phy/phy-rcar-usb.c2
-rw-r--r--drivers/usb/phy/phy-samsung-usb.c159
-rw-r--r--drivers/usb/phy/phy-samsung-usb.h24
-rw-r--r--drivers/usb/phy/phy-samsung-usb2.c62
-rw-r--r--drivers/usb/phy/phy-samsung-usb3.c23
-rw-r--r--drivers/usb/phy/phy-tegra-usb.c354
-rw-r--r--drivers/usb/phy/phy-ulpi-viewport.c2
-rw-r--r--drivers/usb/serial/Kconfig10
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/ark3116.c4
-rw-r--r--drivers/usb/serial/bus.c6
-rw-r--r--drivers/usb/serial/console.c8
-rw-r--r--drivers/usb/serial/cp210x.c2
-rw-r--r--drivers/usb/serial/cypress_m8.c4
-rw-r--r--drivers/usb/serial/digi_acceleport.c6
-rw-r--r--drivers/usb/serial/f81232.c7
-rw-r--r--drivers/usb/serial/flashloader.c39
-rw-r--r--drivers/usb/serial/garmin_gps.c6
-rw-r--r--drivers/usb/serial/io_edgeport.c60
-rw-r--r--drivers/usb/serial/io_ti.c23
-rw-r--r--drivers/usb/serial/keyspan.c42
-rw-r--r--drivers/usb/serial/metro-usb.c4
-rw-r--r--drivers/usb/serial/mos7720.c39
-rw-r--r--drivers/usb/serial/mos7840.c57
-rw-r--r--drivers/usb/serial/opticon.c4
-rw-r--r--drivers/usb/serial/option.c4
-rw-r--r--drivers/usb/serial/pl2303.c12
-rw-r--r--drivers/usb/serial/qcserial.c8
-rw-r--r--drivers/usb/serial/quatech2.c11
-rw-r--r--drivers/usb/serial/sierra.c2
-rw-r--r--drivers/usb/serial/ssu100.c2
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c12
-rw-r--r--drivers/usb/serial/usb-serial.c133
-rw-r--r--drivers/usb/serial/usb_wwan.c4
-rw-r--r--drivers/usb/serial/whiteheat.c22
-rw-r--r--drivers/usb/storage/alauda.c6
-rw-r--r--drivers/usb/storage/sddr09.c6
-rw-r--r--drivers/usb/usb-common.c35
-rw-r--r--drivers/usb/wusbcore/devconnect.c6
-rw-r--r--drivers/usb/wusbcore/mmc.c33
-rw-r--r--drivers/usb/wusbcore/pal.c5
-rw-r--r--drivers/usb/wusbcore/reservation.c3
-rw-r--r--drivers/usb/wusbcore/rh.c20
-rw-r--r--drivers/usb/wusbcore/wa-nep.c3
-rw-r--r--drivers/usb/wusbcore/wa-rpipe.c45
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c181
-rw-r--r--drivers/usb/wusbcore/wusbhc.c79
-rw-r--r--drivers/usb/wusbcore/wusbhc.h7
-rw-r--r--drivers/uwb/drp.c4
-rw-r--r--drivers/uwb/est.c7
-rw-r--r--drivers/uwb/hwa-rc.c6
-rw-r--r--drivers/uwb/pal.c2
-rw-r--r--drivers/uwb/rsv.c4
-rw-r--r--drivers/uwb/uwb-internal.h3
-rw-r--r--drivers/uwb/whci.c14
-rw-r--r--include/linux/platform_data/usb3503.h5
-rw-r--r--include/linux/usb.h21
-rw-r--r--include/linux/usb/chipidea.h31
-rw-r--r--include/linux/usb/hcd.h1
-rw-r--r--include/linux/usb/of.h32
-rw-r--r--include/linux/usb/otg.h7
-rw-r--r--include/linux/usb/phy.h9
-rw-r--r--include/linux/usb/serial.h15
-rw-r--r--include/linux/usb/tegra_usb_phy.h9
-rw-r--r--include/linux/usb/wusb-wa.h17
249 files changed, 16059 insertions, 3376 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget
new file mode 100644
index 00000000000..01e769d6984
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget
@@ -0,0 +1,81 @@
+What: /config/usb-gadget
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ This group contains sub-groups corresponding to created
+ USB gadgets.
+
+What: /config/usb-gadget/gadget
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+
+ The attributes of a gadget:
+
+ UDC - bind a gadget to UDC/unbind a gadget;
+ write UDC's name found in /sys/class/udc/*
+ to bind a gadget, empty string "" to unbind.
+
+ bDeviceClass - USB device class code
+ bDeviceSubClass - USB device subclass code
+ bDeviceProtocol - USB device protocol code
+ bMaxPacketSize0 - maximum endpoint 0 packet size
+ bcdDevice - bcd device release number
+ bcdUSB - bcd USB specification version number
+ idProduct - product ID
+ idVendor - vendor ID
+
+What: /config/usb-gadget/gadget/configs
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ This group contains a USB gadget's configurations
+
+What: /config/usb-gadget/gadget/configs/config
+Date: Jun 2013
+KernelVersion: 3.11
+Description:
+ The attributes of a configuration:
+
+ bmAttributes - configuration characteristics
+ MaxPower - maximum power consumption from the bus
+
+What: /config/usb-gadget/gadget/configs/config/strings
+Date: Jun 2013
+KernelVersion: 3.11
+Description:
+ This group contains subdirectories for language-specific
+ strings for this configuration.
+
+What: /config/usb-gadget/gadget/configs/config/strings/language
+Date: Jun 2013
+KernelVersion: 3.11
+Description:
+ The attributes:
+
+ configuration - configuration description
+
+
+What: /config/usb-gadget/gadget/functions
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ This group contains functions available to this USB gadget.
+
+What: /config/usb-gadget/gadget/strings
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ This group contains subdirectories for language-specific
+ strings for this gadget.
+
+What: /config/usb-gadget/gadget/strings/language
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ The attributes:
+
+ serialnumber - gadget's serial number (string)
+ product - gadget's product description
+ manufacturer - gadget's manufacturer description
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-acm b/Documentation/ABI/testing/configfs-usb-gadget-acm
new file mode 100644
index 00000000000..5708a568b5f
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-acm
@@ -0,0 +1,8 @@
+What: /config/usb-gadget/gadget/functions/acm.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+
+ This item contains just one readonly attribute: port_num.
+ It contains the port number of the /dev/ttyGS<n> device
+ associated with acm function's instance "name".
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ecm b/Documentation/ABI/testing/configfs-usb-gadget-ecm
new file mode 100644
index 00000000000..6b9a582ce0b
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-ecm
@@ -0,0 +1,16 @@
+What: /config/usb-gadget/gadget/functions/ecm.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ The attributes:
+
+ ifname - network device interface name associated with
+ this function instance
+ qmult - queue length multiplier for high and
+ super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-eem b/Documentation/ABI/testing/configfs-usb-gadget-eem
new file mode 100644
index 00000000000..dbddf36b48b
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-eem
@@ -0,0 +1,14 @@
+What: /config/usb-gadget/gadget/functions/eem.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ The attributes:
+
+ ifname - network device interface name associated with
+ this function instance
+ qmult - queue length multiplier for high and
+ super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ncm b/Documentation/ABI/testing/configfs-usb-gadget-ncm
new file mode 100644
index 00000000000..bc309f42357
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-ncm
@@ -0,0 +1,15 @@
+What: /config/usb-gadget/gadget/functions/ncm.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ The attributes:
+
+ ifname - network device interface name associated with
+ this function instance
+ qmult - queue length multiplier for high and
+ super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-obex b/Documentation/ABI/testing/configfs-usb-gadget-obex
new file mode 100644
index 00000000000..aaa5c96fb7c
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-obex
@@ -0,0 +1,9 @@
+What: /config/usb-gadget/gadget/functions/obex.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+
+ This item contains just one readonly attribute: port_num.
+ It contains the port number of the /dev/ttyGS<n> device
+ associated with obex function's instance "name".
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-phonet b/Documentation/ABI/testing/configfs-usb-gadget-phonet
new file mode 100644
index 00000000000..3e3b742cdfd
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-phonet
@@ -0,0 +1,8 @@
+What: /config/usb-gadget/gadget/functions/phonet.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+
+ This item contains just one readonly attribute: ifname.
+ It contains the network interface name assigned during
+ network device registration.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis
new file mode 100644
index 00000000000..822e6dad8fc
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -0,0 +1,14 @@
+What: /config/usb-gadget/gadget/functions/rndis.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ The attributes:
+
+ ifname - network device interface name associated with
+ this function instance
+ qmult - queue length multiplier for high and
+ super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-serial b/Documentation/ABI/testing/configfs-usb-gadget-serial
new file mode 100644
index 00000000000..16f130c1501
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-serial
@@ -0,0 +1,9 @@
+What: /config/usb-gadget/gadget/functions/gser.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+
+ This item contains just one readonly attribute: port_num.
+ It contains the port number of the /dev/ttyGS<n> device
+ associated with gser function's instance "name".
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-subset b/Documentation/ABI/testing/configfs-usb-gadget-subset
new file mode 100644
index 00000000000..154ae597cd9
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-subset
@@ -0,0 +1,14 @@
+What: /config/usb-gadget/gadget/functions/geth.name
+Date: Jun 2013
+KenelVersion: 3.11
+Description:
+ The attributes:
+
+ ifname - network device interface name associated with
+ this function instance
+ qmult - queue length multiplier for high and
+ super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index f093e59cbe5..9759b8c9133 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -236,3 +236,30 @@ Description:
This attribute is to expose these information to user space.
The file will read "hotplug", "wired" and "not used" if the
information is available, and "unknown" otherwise.
+
+What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
+Date: May 2013
+Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+ USB 2.0 devices may support hardware link power management (LPM)
+ L1 sleep state. The usb2_lpm_l1_timeout attribute allows
+ tuning the timeout for L1 inactivity timer (LPM timer), e.g.
+ needed inactivity time before host requests the device to go to L1 sleep.
+ Useful for power management tuning.
+ Supported values are 0 - 65535 microseconds.
+
+What: /sys/bus/usb/devices/.../power/usb2_lpm_besl
+Date: May 2013
+Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+ USB 2.0 devices that support hardware link power management (LPM)
+ L1 sleep state now use a best effort service latency value (BESL) to
+ indicate the best effort to resumption of service to the device after the
+ initiation of the resume event.
+ If the device does not have a preferred besl value then the host can select
+ one instead. This usb2_lpm_besl attribute allows to tune the host selected besl
+ value in order to tune power saving and service latency.
+
+ Supported values are 0 - 15.
+ More information on how besl values map to microseconds can be found in
+ USB 2.0 ECN Errata for Link Power Management, section 4.10)
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 25b1e751b77..5977e287532 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -36,3 +36,22 @@ Description:
Refer to [ECMA-368] section 10.3.1.1 for the value to
use.
+
+What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_dnts
+Date: June 2013
+KernelVersion: 3.11
+Contact: Thomas Pugliese <thomas.pugliese@gmail.com>
+Description:
+ The device notification time slot (DNTS) count and inverval in
+ milliseconds that the WUSB host should use. This controls how
+ often the devices will have the opportunity to send
+ notifications to the host.
+
+What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_retry_count
+Date: June 2013
+KernelVersion: 3.11
+Contact: Thomas Pugliese <thomas.pugliese@gmail.com>
+Description:
+ The number of retries that the WUSB host should attempt
+ before reporting an error for a bus transaction. The range of
+ valid values is [0..15], where 0 indicates infinite retries.
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 1c04a4c9515..b4b5b7906c8 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -5,6 +5,12 @@ Required properties:
- reg: Should contain registers location and length
- interrupts: Should contain controller interrupt
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+ of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+ property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
Optional properties:
- fsl,usbphy: phandler of usb phy that connects to the only one port
- fsl,usbmisc: phandler of non-core register device, with one argument
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index 34c95288327..df0933043a5 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -6,27 +6,10 @@ Practice : Universal Serial Bus" with the following modifications
and additions :
Required properties :
- - compatible : Should be "nvidia,tegra20-ehci" for USB controllers
- used in host mode.
- - phy_type : Should be one of "ulpi" or "utmi".
- - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
- activated for the bus to be powered.
- - nvidia,phy : phandle of the PHY instance, the controller is connected to.
-
-Required properties for phy_type == ulpi:
- - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+ - compatible : Should be "nvidia,tegra20-ehci".
+ - nvidia,phy : phandle of the PHY that the controller is connected to.
+ - clocks : Contains a single entry which defines the USB controller's clock.
Optional properties:
- - dr_mode : dual role mode. Indicates the working mode for
- nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",
- or "otg". Default to "host" if not defined for backward compatibility.
- host means this is a host controller
- peripheral means it is device controller
- otg means it can operate as either ("on the go")
- - nvidia,has-legacy-mode : boolean indicates whether this controller can
- operate in legacy mode (as APX 2500 / 2600). In legacy mode some
- registers are accessed through the APB_MISC base address instead of
- the USB controller. Since this is a legacy issue it probably does not
- warrant a compatible string of its own.
- - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
- USB ports, which need reset twice due to hardware issues.
+ - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
+ USB ports, which need reset twice due to hardware issues.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
index 6bdaba2f0aa..c4c9e9e664a 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -4,14 +4,49 @@ The device node for Tegra SOC USB PHY:
Required properties :
- compatible : Should be "nvidia,tegra20-usb-phy".
- - reg : Address and length of the register set for the USB PHY interface.
- - phy_type : Should be one of "ulpi" or "utmi".
+ - reg : Defines the following set of registers, in the order listed:
+ - The PHY's own register set.
+ Always present.
+ - The register set of the PHY containing the UTMI pad control registers.
+ Present if-and-only-if phy_type == utmi.
+ - phy_type : Should be one of "utmi", "ulpi" or "hsic".
+ - clocks : Defines the clocks listed in the clock-names property.
+ - clock-names : The following clock names must be present:
+ - reg: The clock needed to access the PHY's own registers. This is the
+ associated EHCI controller's clock. Always present.
+ - pll_u: PLL_U. Always present.
+ - timer: The timeout clock (clk_m). Present if phy_type == utmi.
+ - utmi-pads: The clock needed to access the UTMI pad control registers.
+ Present if phy_type == utmi.
+ - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2).
+ Present if phy_type == ulpi, and ULPI link mode is in use.
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+Required PHY timing params for utmi phy:
+ - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before
+ start of sync launches RxActive
+ - nvidia,elastic-limit : Variable FIFO Depth of elastic input store
+ - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait
+ before declare IDLE.
+ - nvidia,term-range-adj : Range adjusment on terminations
+ - nvidia,xcvr-setup : HS driver output control
+ - nvidia,xcvr-lsfslew : LS falling slew rate control.
+ - nvidia,xcvr-lsrslew : LS rising slew rate control.
+
Optional properties:
- nvidia,has-legacy-mode : boolean indicates whether this controller can
operate in legacy mode (as APX 2500 / 2600). In legacy mode some
registers are accessed through the APB_MISC base address instead of
- the USB controller. \ No newline at end of file
+ the USB controller.
+ - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
+ optimizations for the devices that are always connected. e.g. modem.
+ - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
+ "host", "peripheral", or "otg". Defaults to "host" if not defined.
+ host means this is a host controller
+ peripheral means it is device controller
+ otg means it can operate as either ("on the go")
+
+Required properties for dr_mode == otg:
+ - vbus-supply: regulator for VBUS
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt
index 6813a715fc7..8c5be48b43c 100644
--- a/Documentation/devicetree/bindings/usb/usb3503.txt
+++ b/Documentation/devicetree/bindings/usb/usb3503.txt
@@ -4,6 +4,10 @@ Required properties:
- compatible: Should be "smsc,usb3503".
- reg: Specifies the i2c slave address, it should be 0x08.
- connect-gpios: Should specify GPIO for connect.
+- disabled-ports: Should specify the ports unused.
+ '1' or '2' or '3' are availe for this property to describe the port
+ number. 1~3 property values are possible to be desribed.
+ Do not describe this property if all ports have to be enabled.
- intn-gpios: Should specify GPIO for interrupt.
- reset-gpios: Should specify GPIO for reset.
- initial-mode: Should specify initial mode.
@@ -14,6 +18,7 @@ Examples:
compatible = "smsc,usb3503";
reg = <0x08>;
connect-gpios = <&gpx3 0 1>;
+ disabled-ports = <2 3>;
intn-gpios = <&gpx3 4 1>;
reset-gpios = <&gpx3 5 1>;
initial-mode = <1>;
diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.txt
new file mode 100644
index 00000000000..8ec2a67c39b
--- /dev/null
+++ b/Documentation/usb/gadget_configfs.txt
@@ -0,0 +1,384 @@
+
+
+
+
+ Linux USB gadget configured through configfs
+
+
+ 25th April 2013
+
+
+
+
+Overview
+========
+
+A USB Linux Gadget is a device which has a UDC (USB Device Controller) and can
+be connected to a USB Host to extend it with additional functions like a serial
+port or a mass storage capability.
+
+A gadget is seen by its host as a set of configurations, each of which contains
+a number of interfaces which, from the gadget's perspective, are known as
+functions, each function representing e.g. a serial connection or a SCSI disk.
+
+Linux provides a number of functions for gadgets to use.
+
+Creating a gadget means deciding what configurations there will be
+and which functions each configuration will provide.
+
+Configfs (please see Documentation/filesystems/configfs/*) lends itslef nicely
+for the purpose of telling the kernel about the above mentioned decision.
+This document is about how to do it.
+
+It also describes how configfs integration into gadget is designed.
+
+
+
+
+Requirements
+============
+
+In order for this to work configfs must be available, so CONFIGFS_FS must be
+'y' or 'm' in .config. As of this writing USB_LIBCOMPOSITE selects CONFIGFS_FS.
+
+
+
+
+Usage
+=====
+
+(The original post describing the first function
+made available through configfs can be seen here:
+http://www.spinics.net/lists/linux-usb/msg76388.html)
+
+$ modprobe libcomposite
+$ mount none $CONFIGFS_HOME -t configfs
+
+where CONFIGFS_HOME is the mount point for configfs
+
+1. Creating the gadgets
+-----------------------
+
+For each gadget to be created its corresponding directory must be created:
+
+$ mkdir $CONFIGFS_HOME/usb_gadget/<gadget name>
+
+e.g.:
+
+$ mkdir $CONFIGFS_HOME/usb_gadget/g1
+
+...
+...
+...
+
+$ cd $CONFIGFS_HOME/usb_gadget/g1
+
+Each gadget needs to have its vendor id <VID> and product id <PID> specified:
+
+$ echo <VID> > idVendor
+$ echo <PID> > idProduct
+
+A gadget also needs its serial number, manufacturer and product strings.
+In order to have a place to store them, a strings subdirectory must be created
+for each language, e.g.:
+
+$ mkdir strings/0x409
+
+Then the strings can be specified:
+
+$ echo <serial number> > strings/0x409/serialnumber
+$ echo <manufacturer> > strings/0x409/manufacturer
+$ echo <product> > strings/0x409/product
+
+2. Creating the configurations
+------------------------------
+
+Each gadget will consist of a number of configurations, their corresponding
+directories must be created:
+
+$ mkdir configs/<name>.<number>
+
+where <name> can be any string which is legal in a filesystem and the
+<numebr> is the configuration's number, e.g.:
+
+$ mkdir configs/c.1
+
+...
+...
+...
+
+Each configuration also needs its strings, so a subdirectory must be created
+for each language, e.g.:
+
+$ mkdir configs/c.1/strings/0x409
+
+Then the configuration string can be specified:
+
+$ echo <configuration> > configs/c.1/strings/0x409/configuration
+
+Some attributes can also be set for a configuration, e.g.:
+
+$ echo 120 > configs/c.1/MaxPower
+
+3. Creating the functions
+-------------------------
+
+The gadget will provide some functions, for each function its corresponding
+directory must be created:
+
+$ mkdir functions/<name>.<instance name>
+
+where <name> corresponds to one of allowed function names and instance name
+is an arbitrary string allowed in a filesystem, e.g.:
+
+$ mkdir functions/ncm.usb0 # usb_f_ncm.ko gets loaded with request_module()
+
+...
+...
+...
+
+Each function provides its specific set of attributes, with either read-only
+or read-write access. Where applicable they need to be written to as
+appropriate.
+Please refer to Documentation/ABI/*/configfs-usb-gadget* for more information.
+
+4. Associating the functions with their configurations
+------------------------------------------------------
+
+At this moment a number of gadgets is created, each of which has a number of
+configurations specified and a number of functions available. What remains
+is specifying which function is available in which configuration (the same
+function can be used in multiple configurations). This is achieved with
+creating symbolic links:
+
+$ ln -s functions/<name>.<instance name> configs/<name>.<number>
+
+e.g.:
+
+$ ln -s functions/ncm.usb0 configs/c.1
+
+...
+...
+...
+
+5. Enabling the gadget
+----------------------
+
+All the above steps serve the purpose of composing the gadget of
+configurations and functions.
+
+An example directory structure might look like this:
+
+.
+./strings
+./strings/0x409
+./strings/0x409/serialnumber
+./strings/0x409/product
+./strings/0x409/manufacturer
+./configs
+./configs/c.1
+./configs/c.1/ncm.usb0 -> ../../../../usb_gadget/g1/functions/ncm.usb0
+./configs/c.1/strings
+./configs/c.1/strings/0x409
+./configs/c.1/strings/0x409/configuration
+./configs/c.1/bmAttributes
+./configs/c.1/MaxPower
+./functions
+./functions/ncm.usb0
+./functions/ncm.usb0/ifname
+./functions/ncm.usb0/qmult
+./functions/ncm.usb0/host_addr
+./functions/ncm.usb0/dev_addr
+./UDC
+./bcdUSB
+./bcdDevice
+./idProduct
+./idVendor
+./bMaxPacketSize0
+./bDeviceProtocol
+./bDeviceSubClass
+./bDeviceClass
+
+
+Such a gadget must be finally enabled so that the USB host can enumerate it.
+In order to enable the gadget it must be bound to a UDC (USB Device Controller).
+
+$ echo <udc name> > UDC
+
+where <udc name> is one of those found in /sys/class/udc/*
+e.g.:
+
+$ echo s3c-hsotg > UDC
+
+
+6. Disabling the gadget
+-----------------------
+
+$ echo "" > UDC
+
+7. Cleaning up
+--------------
+
+Remove functions from configurations:
+
+$ rm configs/<config name>.<number>/<function>
+
+where <config name>.<number> specify the configuration and <function> is
+a symlink to a function being removed from the configuration, e.g.:
+
+$ rm configfs/c.1/ncm.usb0
+
+...
+...
+...
+
+Remove strings directories in configurations
+
+$ rmdir configs/<config name>.<number>/strings/<lang>
+
+e.g.:
+
+$ rmdir configs/c.1/strings/0x409
+
+...
+...
+...
+
+and remove the configurations
+
+$ rmdir configs/<config name>.<number>
+
+e.g.:
+
+rmdir configs/c.1
+
+...
+...
+...
+
+Remove functions (function modules are not unloaded, though)
+
+$ rmdir functions/<name>.<instance name>
+
+e.g.:
+
+$ rmdir functions/ncm.usb0
+
+...
+...
+...
+
+Remove strings directories in the gadget
+
+$ rmdir strings/<lang>
+
+e.g.:
+
+$ rmdir strings/0x409
+
+and finally remove the gadget:
+
+$ cd ..
+$ rmdir <gadget name>
+
+e.g.:
+
+$ rmdir g1
+
+
+
+
+Implementation design
+=====================
+
+Below the idea of how configfs works is presented.
+In configfs there are items and groups, both represented as directories.
+The difference between an item and a group is that a group can contain
+other groups. In the picture below only an item is shown.
+Both items and groups can have attributes, which are represented as files.
+The user can create and remove directories, but cannot remove files,
+which can be read-only or read-write, depending on what they represent.
+
+The filesystem part of configfs operates on config_items/groups and
+configfs_attributes which are generic and of the same type for all
+configured elements. However, they are embedded in usage-specific
+larger structures. In the picture below there is a "cs" which contains
+a config_item and an "sa" which contains a configfs_attribute.
+
+The filesystem view would be like this:
+
+./
+./cs (directory)
+ |
+ +--sa (file)
+ |
+ .
+ .
+ .
+
+Whenever a user reads/writes the "sa" file, a function is called
+which accepts a struct config_item and a struct configfs_attribute.
+In the said function the "cs" and "sa" are retrieved using the well
+known container_of technique and an appropriate sa's function (show or
+store) is called and passed the "cs" and a character buffer. The "show"
+is for displaying the file's contents (copy data from the cs to the
+buffer), while the "store" is for modifying the file's contents (copy data
+from the buffer to the cs), but it is up to the implementer of the
+two functions to decide what they actually do.
+
+typedef struct configured_structure cs;
+typedef struc specific_attribute sa;
+
+ sa
+ +----------------------------------+
+ cs | (*show)(cs *, buffer); |
++-----------------+ | (*store)(cs *, buffer, length); |
+| | | |
+| +-------------+ | | +------------------+ |
+| | struct |-|----|------>|struct | |
+| | config_item | | | |configfs_attribute| |
+| +-------------+ | | +------------------+ |
+| | +----------------------------------+
+| data to be set | .
+| | .
++-----------------+ .
+
+The file names are decided by the config item/group designer, while
+the directories in general can be named at will. A group can have
+a number of its default sub-groups created automatically.
+
+For more information on configfs please see
+Documentation/filesystems/configfs/*.
+
+The concepts described above translate to USB gadgets like this:
+
+1. A gadget has its config group, which has some attributes (idVendor,
+idProduct etc) and default sub-groups (configs, functions, strings).
+Writing to the attributes causes the information to be stored in
+appropriate locations. In the configs, functions and strings sub-groups
+a user can create their sub-groups to represent configurations, functions,
+and groups of strings in a given language.
+
+2. The user creates configurations and functions, in the configurations
+creates symbolic links to functions. This information is used when the
+gadget's UDC attribute is written to, which means binding the gadget
+to the UDC. The code in drivers/usb/gadget/configfs.c iterates over
+all configurations, and in each configuration it iterates over all
+functions and binds them. This way the whole gadget is bound.
+
+3. The file drivers/usb/gadget/configfs.c contains code for
+
+ - gadget's config_group
+ - gadget's default groups (configs, functions, strings)
+ - associating functions with configurations (symlinks)
+
+4. Each USB function naturally has its own view of what it wants
+configured, so config_groups for particular functions are defined
+in the functions implementation files drivers/usb/gadget/f_*.c.
+
+5. Funciton's code is written in such a way that it uses
+
+usb_get_function_instance(), which, in turn, calls request_module.
+So, provided that modprobe works, modules for particular functions
+are loaded automatically. Please note that the converse is not true:
+after a gadget is disabled and torn down, the modules remain loaded.
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index a573b94b7c9..c12af78e479 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -449,7 +449,11 @@
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ };
+
+ usb-phy@c5004000 {
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
};
sdhci@c8000600 {
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index e7d5de4e00b..ec529375875 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -428,17 +428,26 @@
status = "okay";
};
+ usb-phy@c5000000 {
+ status = "okay";
+ };
+
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
};
usb@c5008000 {
status = "okay";
};
- usb-phy@c5004400 {
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ usb-phy@c5008000 {
+ status = "okay";
};
sdhci@c8000200 {
diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
index 52f1103907d..9f64f708688 100644
--- a/arch/arm/boot/dts/tegra20-iris-512.dts
+++ b/arch/arm/boot/dts/tegra20-iris-512.dts
@@ -38,13 +38,20 @@
usb@c5000000 {
status = "okay";
- dr_mode = "otg";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
};
usb@c5008000 {
status = "okay";
};
+ usb-phy@c5008000 {
+ status = "okay";
+ };
+
serial@70006000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index e3e0c9977df..1c17ffaff1a 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -427,17 +427,26 @@
status = "okay";
};
+ usb-phy@c5000000 {
+ status = "okay";
+ };
+
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+ nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
};
usb@c5008000 {
status = "okay";
};
- usb-phy@c5004400 {
- nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+ usb-phy@c5008000 {
+ status = "okay";
};
sdhci@c8000000 {
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index cee4c34010f..009dafecf88 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -569,17 +569,28 @@
dr_mode = "otg";
};
+ usb-phy@c5000000 {
+ status = "okay";
+ vbus-supply = <&vbus_reg>;
+ dr_mode = "otg";
+ };
+
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
};
usb@c5008000 {
status = "okay";
};
- usb-phy@c5004400 {
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ usb-phy@c5008000 {
+ status = "okay";
};
sdhci@c8000000 {
@@ -807,6 +818,15 @@
gpio = <&pmic 1 0>;
enable-active-high;
};
+
+ vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_vbus_wup1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 24 0>; /* PD0 */
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 50b3ec16b93..fc2f7d6e70b 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -470,6 +470,10 @@
status = "okay";
};
+ usb-phy@c5008000 {
+ status = "okay";
+ };
+
sdhci@c8000600 {
cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 9cc78a15d73..0e65c00ec73 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -314,17 +314,27 @@
nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
};
+ usb-phy@c5000000 {
+ status = "okay";
+ vbus-supply = <&vbus_reg>;
+ };
+
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+ nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
};
usb@c5008000 {
status = "okay";
};
- usb-phy@c5004400 {
- nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+ usb-phy@c5008000 {
+ status = "okay";
};
sdhci@c8000000 {
@@ -390,6 +400,15 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+ vbus_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 170 0>; /* PV2 */
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index dd38f1f0383..e00f89e645f 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -505,17 +505,26 @@
status = "okay";
};
+ usb-phy@c5000000 {
+ status = "okay";
+ };
+
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
};
usb@c5008000 {
status = "okay";
};
- usb-phy@c5004400 {
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ usb-phy@c5008000 {
+ status = "okay";
};
sdhci@c8000000 {
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index d2567f83aaf..3c24c9b92b4 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -511,11 +511,21 @@
nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
};
+ usb-phy@c5000000 {
+ status = "okay";
+ vbus-supply = <&vbus1_reg>;
+ };
+
usb@c5008000 {
status = "okay";
nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
};
+ usb-phy@c5008000 {
+ status = "okay";
+ vbus-supply = <&vbus3_reg>;
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
@@ -568,6 +578,24 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vbus1_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vbus1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+ };
+
+ vbus3_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vbus3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 56a91106041..96d6d8a3aa7 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -455,13 +455,24 @@
status = "disabled";
};
- phy1: usb-phy@c5000400 {
+ phy1: usb-phy@c5000000 {
compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5000400 0x3c00>;
+ reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
phy_type = "utmi";
+ clocks = <&tegra_car 22>,
+ <&tegra_car 127>,
+ <&tegra_car 106>,
+ <&tegra_car 22>;
+ clock-names = "reg", "pll_u", "timer", "utmi-pads";
nvidia,has-legacy-mode;
- clocks = <&tegra_car 22>, <&tegra_car 127>;
- clock-names = "phy", "pll_u";
+ hssync_start_delay = <9>;
+ idle_wait_delay = <17>;
+ elastic_limit = <16>;
+ term_range_adj = <6>;
+ xcvr_setup = <9>;
+ xcvr_lsfslew = <1>;
+ xcvr_lsrslew = <1>;
+ status = "disabled";
};
usb@c5004000 {
@@ -474,12 +485,15 @@
status = "disabled";
};
- phy2: usb-phy@c5004400 {
+ phy2: usb-phy@c5004000 {
compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5004400 0x3c00>;
+ reg = <0xc5004000 0x4000>;
phy_type = "ulpi";
- clocks = <&tegra_car 93>, <&tegra_car 127>;
- clock-names = "phy", "pll_u";
+ clocks = <&tegra_car 58>,
+ <&tegra_car 127>,
+ <&tegra_car 93>;
+ clock-names = "reg", "pll_u", "ulpi-link";
+ status = "disabled";
};
usb@c5008000 {
@@ -492,12 +506,23 @@
status = "disabled";
};
- phy3: usb-phy@c5008400 {
+ phy3: usb-phy@c5008000 {
compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5008400 0x3c00>;
+ reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
phy_type = "utmi";
- clocks = <&tegra_car 22>, <&tegra_car 127>;
- clock-names = "phy", "pll_u";
+ clocks = <&tegra_car 59>,
+ <&tegra_car 127>,
+ <&tegra_car 106>,
+ <&tegra_car 22>;
+ clock-names = "reg", "pll_u", "timer", "utmi-pads";
+ hssync_start_delay = <9>;
+ idle_wait_delay = <17>;
+ elastic_limit = <16>;
+ term_range_adj = <6>;
+ xcvr_setup = <9>;
+ xcvr_lsfslew = <2>;
+ xcvr_lsrslew = <2>;
+ status = "disabled";
};
sdhci@c8000000 {
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 8a6e5ea476e..880f5c0011f 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -873,7 +873,7 @@ static int qt_open(struct tty_struct *tty,
result = qt_get_device(serial, &port0->DeviceData);
/* Port specific setups */
- result = qt_open_channel(serial, port->number, &ChannelData);
+ result = qt_open_channel(serial, port->port_number, &ChannelData);
if (result < 0) {
dev_dbg(&port->dev, "qt_open_channel failed\n");
return result;
@@ -888,7 +888,7 @@ static int qt_open(struct tty_struct *tty,
(SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
/* Set Baud rate to default and turn off (default)flow control here */
- result = qt_setuart(serial, port->number, DEFAULT_DIVISOR, DEFAULT_LCR);
+ result = qt_setuart(serial, port->port_number, DEFAULT_DIVISOR, DEFAULT_LCR);
if (result < 0) {
dev_dbg(&port->dev, "qt_setuart failed\n");
return result;
@@ -906,8 +906,7 @@ static int qt_open(struct tty_struct *tty,
qt_submit_urb_from_open(serial, port);
}
- dev_dbg(&port->dev, "port number is %d\n", port->number);
- dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "minor number is %d\n", port->minor);
dev_dbg(&port->dev,
"Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
dev_dbg(&port->dev,
@@ -1003,7 +1002,7 @@ static void qt_close(struct usb_serial_port *port)
status = 0;
tty = tty_port_tty_get(&port->port);
- index = tty->index - serial->minor;
+ index = port->port_number;
qt_port = qt_get_port_private(port);
port0 = qt_get_port_private(serial->port[0]);
@@ -1022,14 +1021,11 @@ static void qt_close(struct usb_serial_port *port)
/* Close uart channel */
status = qt_close_channel(serial, index);
if (status < 0)
- dev_dbg(&port->dev,
- "%s - port %d qt_close_channel failed.\n",
- __func__, port->number);
+ dev_dbg(&port->dev, "%s - qt_close_channel failed.\n", __func__);
port0->open_ports--;
- dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n",
- port0->open_ports, port->number);
+ dev_dbg(&port->dev, "qt_num_open_ports in close%d\n", port0->open_ports);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
@@ -1133,12 +1129,11 @@ static int qt_ioctl(struct tty_struct *tty,
{
struct usb_serial_port *port = tty->driver_data;
struct quatech_port *qt_port = qt_get_port_private(port);
- struct usb_serial *serial = get_usb_serial(port, __func__);
unsigned int index;
dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
- index = tty->index - serial->minor;
+ index = port->port_number;
if (cmd == TIOCMIWAIT) {
while (qt_port != NULL) {
@@ -1169,8 +1164,7 @@ static int qt_ioctl(struct tty_struct *tty,
return 0;
}
- dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n",
- __func__, port->number);
+ dev_dbg(&port->dev, "%s -No ioctl for that one.\n", __func__);
return -ENOIOCTLCMD;
}
@@ -1185,7 +1179,7 @@ static void qt_set_termios(struct tty_struct *tty,
int baud, divisor, remainder;
int status;
- index = tty->index - port->serial->minor;
+ index = port->port_number;
switch (cflag & CSIZE) {
case CS5:
@@ -1245,8 +1239,7 @@ static void qt_set_termios(struct tty_struct *tty,
/* Now determine flow control */
if (cflag & CRTSCTS) {
- dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n",
- __func__, port->number);
+ dev_dbg(&port->dev, "%s - Enabling HW flow control\n", __func__);
/* Enable RTS/CTS flow control */
status = BoxSetHW_FlowCtrl(port->serial, index, 1);
@@ -1258,8 +1251,7 @@ static void qt_set_termios(struct tty_struct *tty,
} else {
/* Disable RTS/CTS flow control */
dev_dbg(&port->dev,
- "%s - disabling HW flow control port %d\n",
- __func__, port->number);
+ "%s - disabling HW flow control\n", __func__);
status = BoxSetHW_FlowCtrl(port->serial, index, 0);
if (status < 0) {
@@ -1303,7 +1295,7 @@ static void qt_break(struct tty_struct *tty, int break_state)
u16 index, onoff;
unsigned int result;
- index = tty->index - serial->minor;
+ index = port->port_number;
qt_port = qt_get_port_private(port);
@@ -1332,7 +1324,7 @@ static inline int qt_real_tiocmget(struct tty_struct *tty,
int status;
unsigned int index;
- index = tty->index - serial->minor;
+ index = port->port_number;
status =
BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
if (status >= 0) {
@@ -1371,7 +1363,7 @@ static inline int qt_real_tiocmset(struct tty_struct *tty,
int status;
unsigned int index;
- index = tty->index - serial->minor;
+ index = port->port_number;
status =
BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
if (status < 0)
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 92e1dc94ecc..73f62caa860 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,59 +2,15 @@
# USB device configuration
#
-# many non-PCI SOC chips embed OHCI
+# These are unused now, remove them once they are no longer selected
config USB_ARCH_HAS_OHCI
- boolean
- # ARM:
- default y if SA1111
- default y if ARCH_OMAP
- default y if ARCH_S3C24XX
- default y if PXA27x
- default y if PXA3xx
- default y if ARCH_EP93XX
- default y if ARCH_AT91
- default y if MFD_TC6393XB
- default y if ARCH_W90X900
- default y if ARCH_DAVINCI_DA8XX
- default y if ARCH_CNS3XXX
- default y if PLAT_SPEAR
- default y if ARCH_EXYNOS
- # PPC:
- default y if STB03xxx
- default y if PPC_MPC52xx
- # MIPS:
- default y if MIPS_ALCHEMY
- default y if MACH_JZ4740
- # more:
- default PCI
-
-# some non-PCI hcds implement EHCI
+ bool
+
config USB_ARCH_HAS_EHCI
- boolean
- default y if FSL_SOC
- default y if PPC_MPC512x
- default y if ARCH_IXP4XX
- default y if ARCH_W90X900
- default y if ARCH_AT91
- default y if ARCH_MXC
- default y if ARCH_MXS
- default y if ARCH_OMAP3
- default y if ARCH_CNS3XXX
- default y if ARCH_VT8500
- default y if PLAT_SPEAR
- default y if PLAT_S5P
- default y if ARCH_MSM
- default y if MICROBLAZE
- default y if SPARC_LEON
- default y if ARCH_MMP
- default y if MACH_LOONGSON1
- default y if PLAT_ORION
- default PCI
-
-# some non-PCI HCDs implement xHCI
+ bool
+
config USB_ARCH_HAS_XHCI
- boolean
- default PCI
+ bool
menuconfig USB_SUPPORT
bool "USB support"
@@ -71,19 +27,8 @@ config USB_COMMON
default y
depends on USB || USB_GADGET
-# Host-side USB depends on having a host controller
-# NOTE: dummy_hcd is always an option, but it's ignored here ...
-# NOTE: SL-811 option should be board-specific ...
config USB_ARCH_HAS_HCD
- boolean
- default y if USB_ARCH_HAS_OHCI
- default y if USB_ARCH_HAS_EHCI
- default y if USB_ARCH_HAS_XHCI
- default y if PCMCIA && !M32R # sl811_cs
- default y if ARM # SL-811
- default y if BLACKFIN # SL-811
- default y if SUPERH # r8a66597-hcd
- default PCI
+ def_bool y
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
config USB
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c41feba8d5c..238c5d47cad 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_HWA_HCD) += host/
obj-$(CONFIG_USB_ISP1760_HCD) += host/
obj-$(CONFIG_USB_IMX21_HCD) += host/
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += host/
+obj-$(CONFIG_USB_FUSBH200_HCD) += host/
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index b2df442eb3e..eb2aa2e5a84 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -12,15 +12,15 @@ if USB_CHIPIDEA
config USB_CHIPIDEA_UDC
bool "ChipIdea device controller"
- depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA
+ depends on USB_GADGET=y || USB_CHIPIDEA=m
help
Say Y here to enable device controller functionality of the
ChipIdea driver.
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
- depends on USB=y || USB=USB_CHIPIDEA
- depends on USB_EHCI_HCD=y
+ depends on USB=y
+ depends on USB_EHCI_HCD=y || USB_CHIPIDEA=m
select USB_EHCI_ROOT_HUB_TT
help
Say Y here to enable host controller functionality of the
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 4ab83e98219..3bbbcba0381 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -9,13 +9,13 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
# Glue/Bridge layers go here
-obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_msm.o
+obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
# PCI doesn't provide stubs, need to check
ifneq ($(CONFIG_PCI),)
- obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_pci.o
+ obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_pci.o
endif
ifneq ($(CONFIG_OF_DEVICE),)
- obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx.o
+ obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_imx.o usbmisc_imx.o
endif
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 050de8562a0..aefa0261220 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -48,10 +48,24 @@
#define PORTSC_SUSP BIT(7)
#define PORTSC_HSP BIT(9)
#define PORTSC_PTC (0x0FUL << 16)
+/* PTS and PTW for non lpm version only */
+#define PORTSC_PTS(d) \
+ ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
+#define PORTSC_PTW BIT(28)
+#define PORTSC_STS BIT(29)
/* DEVLC */
#define DEVLC_PSPD (0x03UL << 25)
-#define DEVLC_PSPD_HS (0x02UL << 25)
+#define DEVLC_PSPD_HS (0x02UL << 25)
+#define DEVLC_PTW BIT(27)
+#define DEVLC_STS BIT(28)
+#define DEVLC_PTS(d) (((d) & 0x7) << 29)
+
+/* Encoding for DEVLC_PTS and PORTSC_PTS */
+#define PTS_UTMI 0
+#define PTS_ULPI 2
+#define PTS_SERIAL 3
+#define PTS_HSIC 4
/* OTGSC */
#define OTGSC_IDPU BIT(5)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index b0a6bce064c..33cb29f36e0 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -22,14 +22,14 @@
* DEFINE
*****************************************************************************/
#define TD_PAGE_COUNT 5
-#define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */
+#define CI_HDRC_PAGE_SIZE 4096ul /* page size for TD's */
#define ENDPT_MAX 32
/******************************************************************************
* STRUCTURES
*****************************************************************************/
/**
- * struct ci13xxx_ep - endpoint representation
+ * struct ci_hw_ep - endpoint representation
* @ep: endpoint structure for gadget drivers
* @dir: endpoint direction (TX/RX)
* @num: endpoint number
@@ -41,7 +41,7 @@
* @lock: pointer to controller's spinlock
* @td_pool: pointer to controller's TD pool
*/
-struct ci13xxx_ep {
+struct ci_hw_ep {
struct usb_ep ep;
u8 dir;
u8 num;
@@ -49,15 +49,16 @@ struct ci13xxx_ep {
char name[16];
struct {
struct list_head queue;
- struct ci13xxx_qh *ptr;
+ struct ci_hw_qh *ptr;
dma_addr_t dma;
} qh;
int wedge;
/* global resources */
- struct ci13xxx *ci;
+ struct ci_hdrc *ci;
spinlock_t *lock;
struct dma_pool *td_pool;
+ struct td_node *pending_td;
};
enum ci_role {
@@ -74,9 +75,9 @@ enum ci_role {
* name: role name string (host/gadget)
*/
struct ci_role_driver {
- int (*start)(struct ci13xxx *);
- void (*stop)(struct ci13xxx *);
- irqreturn_t (*irq)(struct ci13xxx *);
+ int (*start)(struct ci_hdrc *);
+ void (*stop)(struct ci_hdrc *);
+ irqreturn_t (*irq)(struct ci_hdrc *);
const char *name;
};
@@ -101,7 +102,7 @@ struct hw_bank {
};
/**
- * struct ci13xxx - chipidea device representation
+ * struct ci_hdrc - chipidea device representation
* @dev: pointer to parent device
* @lock: access synchronization
* @hw_bank: hardware register mapping
@@ -116,7 +117,7 @@ struct hw_bank {
* @gadget: device side representation for peripheral controller
* @driver: gadget driver
* @hw_ep_max: total number of endpoints supported by hardware
- * @ci13xxx_ep: array of endpoints
+ * @ci_hw_ep: array of endpoints
* @ep0_dir: ep0 direction
* @ep0out: pointer to ep0 OUT endpoint
* @ep0in: pointer to ep0 IN endpoint
@@ -132,7 +133,7 @@ struct hw_bank {
* @hcd: pointer to usb_hcd for ehci host driver
* @debugfs: root dentry for this controller in debugfs
*/
-struct ci13xxx {
+struct ci_hdrc {
struct device *dev;
spinlock_t lock;
struct hw_bank hw_bank;
@@ -149,9 +150,9 @@ struct ci13xxx {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
unsigned hw_ep_max;
- struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX];
+ struct ci_hw_ep ci_hw_ep[ENDPT_MAX];
u32 ep0_dir;
- struct ci13xxx_ep *ep0out, *ep0in;
+ struct ci_hw_ep *ep0out, *ep0in;
struct usb_request *status;
bool setaddr;
@@ -160,7 +161,7 @@ struct ci13xxx {
u8 suspended;
u8 test_mode;
- struct ci13xxx_platform_data *platdata;
+ struct ci_hdrc_platform_data *platdata;
int vbus_active;
/* FIXME: some day, we'll not use global phy */
bool global_phy;
@@ -169,13 +170,13 @@ struct ci13xxx {
struct dentry *debugfs;
};
-static inline struct ci_role_driver *ci_role(struct ci13xxx *ci)
+static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
{
BUG_ON(ci->role >= CI_ROLE_END || !ci->roles[ci->role]);
return ci->roles[ci->role];
}
-static inline int ci_role_start(struct ci13xxx *ci, enum ci_role role)
+static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
{
int ret;
@@ -191,7 +192,7 @@ static inline int ci_role_start(struct ci13xxx *ci, enum ci_role role)
return ret;
}
-static inline void ci_role_stop(struct ci13xxx *ci)
+static inline void ci_role_stop(struct ci_hdrc *ci)
{
enum ci_role role = ci->role;
@@ -210,7 +211,7 @@ static inline void ci_role_stop(struct ci13xxx *ci)
#define REG_BITS (32)
/* register indices */
-enum ci13xxx_regs {
+enum ci_hw_regs {
CAP_CAPLENGTH,
CAP_HCCPARAMS,
CAP_DCCPARAMS,
@@ -242,7 +243,7 @@ enum ci13xxx_regs {
*
* This function returns register contents
*/
-static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask)
+static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
{
return ioread32(ci->hw_bank.regmap[reg]) & mask;
}
@@ -253,7 +254,7 @@ static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask)
* @mask: bitfield mask
* @data: new value
*/
-static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
+static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
u32 mask, u32 data)
{
if (~mask)
@@ -270,7 +271,7 @@ static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
*
* This function returns register contents
*/
-static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
u32 mask)
{
u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
@@ -287,7 +288,7 @@ static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg,
*
* This function returns register contents
*/
-static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
u32 mask, u32 data)
{
u32 val = hw_read(ci, reg, ~0);
@@ -296,10 +297,10 @@ static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
return (val & mask) >> __ffs(mask);
}
-int hw_device_reset(struct ci13xxx *ci, u32 mode);
+int hw_device_reset(struct ci_hdrc *ci, u32 mode);
-int hw_port_test_set(struct ci13xxx *ci, u8 mode);
+int hw_port_test_set(struct ci_hdrc *ci, u8 mode);
-u8 hw_port_test_get(struct ci13xxx *ci);
+u8 hw_port_test_get(struct ci_hdrc *ci);
#endif /* __DRIVERS_USB_CHIPIDEA_CI_H */
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 73f9d5f15ad..14362c00db3 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -20,16 +20,14 @@
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
-#include <linux/pinctrl/consumer.h>
#include "ci.h"
-#include "ci13xxx_imx.h"
+#include "ci_hdrc_imx.h"
#define pdev_to_phy(pdev) \
((struct usb_phy *)platform_get_drvdata(pdev))
-struct ci13xxx_imx_data {
- struct device_node *phy_np;
+struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
@@ -88,22 +86,17 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
/* End of common functions shared by usbmisc drivers*/
-static struct ci13xxx_platform_data ci13xxx_imx_platdata = {
- .name = "ci13xxx_imx",
- .flags = CI13XXX_REQUIRE_TRANSCEIVER |
- CI13XXX_PULLUP_ON_VBUS |
- CI13XXX_DISABLE_STREAMING,
- .capoffset = DEF_CAPOFFSET,
-};
-
-static int ci13xxx_imx_probe(struct platform_device *pdev)
+static int ci_hdrc_imx_probe(struct platform_device *pdev)
{
- struct ci13xxx_imx_data *data;
- struct platform_device *plat_ci, *phy_pdev;
- struct device_node *phy_np;
+ struct ci_hdrc_imx_data *data;
+ struct ci_hdrc_platform_data pdata = {
+ .name = "ci_hdrc_imx",
+ .capoffset = DEF_CAPOFFSET,
+ .flags = CI_HDRC_REQUIRE_TRANSCEIVER |
+ CI_HDRC_PULLUP_ON_VBUS |
+ CI_HDRC_DISABLE_STREAMING,
+ };
struct resource *res;
- struct regulator *reg_vbus;
- struct pinctrl *pinctrl;
int ret;
if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL)
@@ -112,7 +105,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
- dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
+ dev_err(&pdev->dev, "Failed to allocate ci_hdrc-imx data!\n");
return -ENOMEM;
}
@@ -122,11 +115,6 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
return -ENOENT;
}
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl))
- dev_warn(&pdev->dev, "pinctrl get/select failed, err=%ld\n",
- PTR_ERR(pinctrl));
-
data->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(data->clk)) {
dev_err(&pdev->dev,
@@ -141,37 +129,33 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
return ret;
}
- phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
- if (phy_np) {
- data->phy_np = phy_np;
- phy_pdev = of_find_device_by_node(phy_np);
- if (phy_pdev) {
- struct usb_phy *phy;
- phy = pdev_to_phy(phy_pdev);
- if (phy &&
- try_module_get(phy_pdev->dev.driver->owner)) {
- usb_phy_init(phy);
- data->phy = phy;
- }
+ data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
+ if (!IS_ERR(data->phy)) {
+ ret = usb_phy_init(data->phy);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to init phy: %d\n", ret);
+ goto err_clk;
}
+ } else if (PTR_ERR(data->phy) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_clk;
}
/* we only support host now, so enable vbus here */
- reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
- if (!IS_ERR(reg_vbus)) {
- ret = regulator_enable(reg_vbus);
+ data->reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
+ if (!IS_ERR(data->reg_vbus)) {
+ ret = regulator_enable(data->reg_vbus);
if (ret) {
dev_err(&pdev->dev,
"Failed to enable vbus regulator, err=%d\n",
ret);
- goto put_np;
+ goto err_clk;
}
- data->reg_vbus = reg_vbus;
} else {
- reg_vbus = NULL;
+ data->reg_vbus = NULL;
}
- ci13xxx_imx_platdata.phy = data->phy;
+ pdata.phy = data->phy;
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
@@ -187,11 +171,11 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
}
}
- plat_ci = ci13xxx_add_device(&pdev->dev,
+ data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
- &ci13xxx_imx_platdata);
- if (IS_ERR(plat_ci)) {
- ret = PTR_ERR(plat_ci);
+ &pdata);
+ if (IS_ERR(data->ci_pdev)) {
+ ret = PTR_ERR(data->ci_pdev);
dev_err(&pdev->dev,
"Can't register ci_hdrc platform device, err=%d\n",
ret);
@@ -203,11 +187,10 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"usbmisc post failed, ret=%d\n", ret);
- goto put_np;
+ goto disable_device;
}
}
- data->ci_pdev = plat_ci;
platform_set_drvdata(pdev, data);
pm_runtime_no_callbacks(&pdev->dev);
@@ -215,22 +198,22 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
return 0;
+disable_device:
+ ci_hdrc_remove_device(data->ci_pdev);
err:
- if (reg_vbus)
- regulator_disable(reg_vbus);
-put_np:
- if (phy_np)
- of_node_put(phy_np);
+ if (data->reg_vbus)
+ regulator_disable(data->reg_vbus);
+err_clk:
clk_disable_unprepare(data->clk);
return ret;
}
-static int ci13xxx_imx_remove(struct platform_device *pdev)
+static int ci_hdrc_imx_remove(struct platform_device *pdev)
{
- struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
+ struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
- ci13xxx_remove_device(data->ci_pdev);
+ ci_hdrc_remove_device(data->ci_pdev);
if (data->reg_vbus)
regulator_disable(data->reg_vbus);
@@ -240,35 +223,31 @@ static int ci13xxx_imx_remove(struct platform_device *pdev)
module_put(data->phy->dev->driver->owner);
}
- of_node_put(data->phy_np);
-
clk_disable_unprepare(data->clk);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
-static const struct of_device_id ci13xxx_imx_dt_ids[] = {
+static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx27-usb", },
{ /* sentinel */ }
};
-MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
+MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
-static struct platform_driver ci13xxx_imx_driver = {
- .probe = ci13xxx_imx_probe,
- .remove = ci13xxx_imx_remove,
+static struct platform_driver ci_hdrc_imx_driver = {
+ .probe = ci_hdrc_imx_probe,
+ .remove = ci_hdrc_imx_remove,
.driver = {
.name = "imx_usb",
.owner = THIS_MODULE,
- .of_match_table = ci13xxx_imx_dt_ids,
+ .of_match_table = ci_hdrc_imx_dt_ids,
},
};
-module_platform_driver(ci13xxx_imx_driver);
+module_platform_driver(ci_hdrc_imx_driver);
MODULE_ALIAS("platform:imx-usb");
MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("CI13xxx i.MX USB binding");
+MODULE_DESCRIPTION("CI HDRC i.MX USB binding");
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
diff --git a/drivers/usb/chipidea/ci13xxx_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 550bfa45762..550bfa45762 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 7d16681fd3d..fb657ef50a9 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -17,19 +17,19 @@
#define MSM_USB_BASE (ci->hw_bank.abs)
-static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event)
+static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
struct device *dev = ci->gadget.dev.parent;
int val;
switch (event) {
- case CI13XXX_CONTROLLER_RESET_EVENT:
- dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n");
+ case CI_HDRC_CONTROLLER_RESET_EVENT:
+ dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
writel(0, USB_AHBBURST);
writel(0, USB_AHBMODE);
break;
- case CI13XXX_CONTROLLER_STOPPED_EVENT:
- dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n");
+ case CI_HDRC_CONTROLLER_STOPPED_EVENT:
+ dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
/*
* Put the transceiver in non-driving mode. Otherwise host
* may not detect soft-disconnection.
@@ -40,32 +40,32 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event)
usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
break;
default:
- dev_dbg(dev, "unknown ci13xxx event\n");
+ dev_dbg(dev, "unknown ci_hdrc event\n");
break;
}
}
-static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
- .name = "ci13xxx_msm",
- .flags = CI13XXX_REGS_SHARED |
- CI13XXX_REQUIRE_TRANSCEIVER |
- CI13XXX_PULLUP_ON_VBUS |
- CI13XXX_DISABLE_STREAMING,
+static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
+ .name = "ci_hdrc_msm",
+ .flags = CI_HDRC_REGS_SHARED |
+ CI_HDRC_REQUIRE_TRANSCEIVER |
+ CI_HDRC_PULLUP_ON_VBUS |
+ CI_HDRC_DISABLE_STREAMING,
- .notify_event = ci13xxx_msm_notify_event,
+ .notify_event = ci_hdrc_msm_notify_event,
};
-static int ci13xxx_msm_probe(struct platform_device *pdev)
+static int ci_hdrc_msm_probe(struct platform_device *pdev)
{
struct platform_device *plat_ci;
- dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
+ dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
- plat_ci = ci13xxx_add_device(&pdev->dev,
+ plat_ci = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
- &ci13xxx_msm_platdata);
+ &ci_hdrc_msm_platdata);
if (IS_ERR(plat_ci)) {
- dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+ dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
return PTR_ERR(plat_ci);
}
@@ -77,23 +77,24 @@ static int ci13xxx_msm_probe(struct platform_device *pdev)
return 0;
}
-static int ci13xxx_msm_remove(struct platform_device *pdev)
+static int ci_hdrc_msm_remove(struct platform_device *pdev)
{
struct platform_device *plat_ci = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
- ci13xxx_remove_device(plat_ci);
+ ci_hdrc_remove_device(plat_ci);
return 0;
}
-static struct platform_driver ci13xxx_msm_driver = {
- .probe = ci13xxx_msm_probe,
- .remove = ci13xxx_msm_remove,
+static struct platform_driver ci_hdrc_msm_driver = {
+ .probe = ci_hdrc_msm_probe,
+ .remove = ci_hdrc_msm_remove,
.driver = { .name = "msm_hsusb", },
};
-module_platform_driver(ci13xxx_msm_driver);
+module_platform_driver(ci_hdrc_msm_driver);
MODULE_ALIAS("platform:msm_hsusb");
+MODULE_ALIAS("platform:ci13xxx_msm");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
index 4e1fc61b9d9..042320a6c6c 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -1,5 +1,5 @@
/*
- * ci13xxx_pci.c - MIPS USB IP core family device controller
+ * ci_hdrc_pci.c - MIPS USB IP core family device controller
*
* Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
*
@@ -18,29 +18,29 @@
#include <linux/usb/chipidea.h>
/* driver name */
-#define UDC_DRIVER_NAME "ci13xxx_pci"
+#define UDC_DRIVER_NAME "ci_hdrc_pci"
/******************************************************************************
* PCI block
*****************************************************************************/
-static struct ci13xxx_platform_data pci_platdata = {
+static struct ci_hdrc_platform_data pci_platdata = {
.name = UDC_DRIVER_NAME,
.capoffset = DEF_CAPOFFSET,
};
-static struct ci13xxx_platform_data langwell_pci_platdata = {
+static struct ci_hdrc_platform_data langwell_pci_platdata = {
.name = UDC_DRIVER_NAME,
.capoffset = 0,
};
-static struct ci13xxx_platform_data penwell_pci_platdata = {
+static struct ci_hdrc_platform_data penwell_pci_platdata = {
.name = UDC_DRIVER_NAME,
.capoffset = 0,
.power_budget = 200,
};
/**
- * ci13xxx_pci_probe: PCI probe
+ * ci_hdrc_pci_probe: PCI probe
* @pdev: USB device controller being probed
* @id: PCI hotplug ID connecting controller to UDC framework
*
@@ -48,10 +48,10 @@ static struct ci13xxx_platform_data penwell_pci_platdata = {
* Allocates basic PCI resources for this USB device controller, and then
* invokes the udc_probe() method to start the UDC associated with it
*/
-static int ci13xxx_pci_probe(struct pci_dev *pdev,
+static int ci_hdrc_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- struct ci13xxx_platform_data *platdata = (void *)id->driver_data;
+ struct ci_hdrc_platform_data *platdata = (void *)id->driver_data;
struct platform_device *plat_ci;
struct resource res[3];
int retval = 0, nres = 2;
@@ -61,17 +61,15 @@ static int ci13xxx_pci_probe(struct pci_dev *pdev,
return -ENODEV;
}
- retval = pci_enable_device(pdev);
+ retval = pcim_enable_device(pdev);
if (retval)
- goto done;
+ return retval;
if (!pdev->irq) {
dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
- retval = -ENODEV;
- goto disable_device;
+ return -ENODEV;
}
- pci_set_power_state(pdev, PCI_D0);
pci_set_master(pdev);
pci_try_set_mwi(pdev);
@@ -82,38 +80,30 @@ static int ci13xxx_pci_probe(struct pci_dev *pdev,
res[1].start = pdev->irq;
res[1].flags = IORESOURCE_IRQ;
- plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata);
+ plat_ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
if (IS_ERR(plat_ci)) {
- dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
- retval = PTR_ERR(plat_ci);
- goto disable_device;
+ dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
+ return PTR_ERR(plat_ci);
}
pci_set_drvdata(pdev, plat_ci);
return 0;
-
- disable_device:
- pci_disable_device(pdev);
- done:
- return retval;
}
/**
- * ci13xxx_pci_remove: PCI remove
+ * ci_hdrc_pci_remove: PCI remove
* @pdev: USB Device Controller being removed
*
- * Reverses the effect of ci13xxx_pci_probe(),
+ * Reverses the effect of ci_hdrc_pci_probe(),
* first invoking the udc_remove() and then releases
* all PCI resources allocated for this USB device controller
*/
-static void ci13xxx_pci_remove(struct pci_dev *pdev)
+static void ci_hdrc_pci_remove(struct pci_dev *pdev)
{
struct platform_device *plat_ci = pci_get_drvdata(pdev);
- ci13xxx_remove_device(plat_ci);
- pci_set_drvdata(pdev, NULL);
- pci_disable_device(pdev);
+ ci_hdrc_remove_device(plat_ci);
}
/**
@@ -122,7 +112,7 @@ static void ci13xxx_pci_remove(struct pci_dev *pdev)
*
* Check "pci.h" for details
*/
-static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
+static DEFINE_PCI_DEVICE_TABLE(ci_hdrc_pci_id_table) = {
{
PCI_DEVICE(0x153F, 0x1004),
.driver_data = (kernel_ulong_t)&pci_platdata,
@@ -141,18 +131,19 @@ static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
},
{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
};
-MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
+MODULE_DEVICE_TABLE(pci, ci_hdrc_pci_id_table);
-static struct pci_driver ci13xxx_pci_driver = {
+static struct pci_driver ci_hdrc_pci_driver = {
.name = UDC_DRIVER_NAME,
- .id_table = ci13xxx_pci_id_table,
- .probe = ci13xxx_pci_probe,
- .remove = ci13xxx_pci_remove,
+ .id_table = ci_hdrc_pci_id_table,
+ .probe = ci_hdrc_pci_probe,
+ .remove = ci_hdrc_pci_remove,
};
-module_pci_driver(ci13xxx_pci_driver);
+module_pci_driver(ci_hdrc_pci_driver);
MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
MODULE_LICENSE("GPL");
MODULE_VERSION("June 2008");
+MODULE_ALIAS("platform:ci13xxx_pci");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 475c9c11468..a5df24c578f 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -43,8 +43,7 @@
*
* TODO List
* - OTG
- * - Isochronous & Interrupt Traffic
- * - Handle requests which spawns into several TDs
+ * - Interrupt Traffic
* - GET_STATUS(device) - always reports 0
* - Gadget API (majority of optional features)
* - Suspend & Remote Wakeup
@@ -64,6 +63,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/phy.h>
#include "ci.h"
#include "udc.h"
@@ -116,7 +117,7 @@ static uintptr_t ci_regs_lpm[] = {
[OP_ENDPTCTRL] = 0x0ECUL,
};
-static int hw_alloc_regmap(struct ci13xxx *ci, bool is_lpm)
+static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
{
int i;
@@ -148,7 +149,7 @@ static int hw_alloc_regmap(struct ci13xxx *ci, bool is_lpm)
*
* This function returns an error code
*/
-int hw_port_test_set(struct ci13xxx *ci, u8 mode)
+int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
{
const u8 TEST_MODE_MAX = 7;
@@ -164,12 +165,12 @@ int hw_port_test_set(struct ci13xxx *ci, u8 mode)
*
* This function returns port test mode value
*/
-u8 hw_port_test_get(struct ci13xxx *ci)
+u8 hw_port_test_get(struct ci_hdrc *ci)
{
return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
}
-static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
+static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
{
u32 reg;
@@ -208,13 +209,52 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
return 0;
}
+static void hw_phymode_configure(struct ci_hdrc *ci)
+{
+ u32 portsc, lpm, sts;
+
+ switch (ci->platdata->phy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ portsc = PORTSC_PTS(PTS_UTMI);
+ lpm = DEVLC_PTS(PTS_UTMI);
+ break;
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
+ lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
+ break;
+ case USBPHY_INTERFACE_MODE_ULPI:
+ portsc = PORTSC_PTS(PTS_ULPI);
+ lpm = DEVLC_PTS(PTS_ULPI);
+ break;
+ case USBPHY_INTERFACE_MODE_SERIAL:
+ portsc = PORTSC_PTS(PTS_SERIAL);
+ lpm = DEVLC_PTS(PTS_SERIAL);
+ sts = 1;
+ break;
+ case USBPHY_INTERFACE_MODE_HSIC:
+ portsc = PORTSC_PTS(PTS_HSIC);
+ lpm = DEVLC_PTS(PTS_HSIC);
+ break;
+ default:
+ return;
+ }
+
+ if (ci->hw_bank.lpm) {
+ hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
+ hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
+ } else {
+ hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
+ hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
+ }
+}
+
/**
* hw_device_reset: resets chip (execute without interruption)
* @ci: the controller
*
* This function returns an error code
*/
-int hw_device_reset(struct ci13xxx *ci, u32 mode)
+int hw_device_reset(struct ci_hdrc *ci, u32 mode)
{
/* should flush & stop before reset */
hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
@@ -224,12 +264,13 @@ int hw_device_reset(struct ci13xxx *ci, u32 mode)
while (hw_read(ci, OP_USBCMD, USBCMD_RST))
udelay(10); /* not RTOS friendly */
+ hw_phymode_configure(ci);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
- CI13XXX_CONTROLLER_RESET_EVENT);
+ CI_HDRC_CONTROLLER_RESET_EVENT);
- if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+ if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
/* USBMODE should be configured step by step */
@@ -251,7 +292,7 @@ int hw_device_reset(struct ci13xxx *ci, u32 mode)
* ci_otg_role - pick role based on ID pin state
* @ci: the controller
*/
-static enum ci_role ci_otg_role(struct ci13xxx *ci)
+static enum ci_role ci_otg_role(struct ci_hdrc *ci)
{
u32 sts = hw_read(ci, OP_OTGSC, ~0);
enum ci_role role = sts & OTGSC_ID
@@ -267,7 +308,7 @@ static enum ci_role ci_otg_role(struct ci13xxx *ci)
*/
static void ci_role_work(struct work_struct *work)
{
- struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
+ struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
enum ci_role role = ci_otg_role(ci);
if (role != ci->role) {
@@ -283,7 +324,7 @@ static void ci_role_work(struct work_struct *work)
static irqreturn_t ci_irq(int irq, void *data)
{
- struct ci13xxx *ci = data;
+ struct ci_hdrc *ci = data;
irqreturn_t ret = IRQ_NONE;
u32 otgsc = 0;
@@ -305,9 +346,9 @@ static irqreturn_t ci_irq(int irq, void *data)
static DEFINE_IDA(ci_ida);
-struct platform_device *ci13xxx_add_device(struct device *dev,
+struct platform_device *ci_hdrc_add_device(struct device *dev,
struct resource *res, int nres,
- struct ci13xxx_platform_data *platdata)
+ struct ci_hdrc_platform_data *platdata)
{
struct platform_device *pdev;
int id, ret;
@@ -347,29 +388,33 @@ put_id:
ida_simple_remove(&ci_ida, id);
return ERR_PTR(ret);
}
-EXPORT_SYMBOL_GPL(ci13xxx_add_device);
+EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
-void ci13xxx_remove_device(struct platform_device *pdev)
+void ci_hdrc_remove_device(struct platform_device *pdev)
{
int id = pdev->id;
platform_device_unregister(pdev);
ida_simple_remove(&ci_ida, id);
}
-EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
+EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
static int ci_hdrc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ci13xxx *ci;
+ struct ci_hdrc *ci;
struct resource *res;
void __iomem *base;
int ret;
+ enum usb_dr_mode dr_mode;
if (!dev->platform_data) {
dev_err(dev, "platform data missing\n");
return -ENODEV;
}
+ if (!dev->of_node && dev->parent)
+ dev->of_node = dev->parent->of_node;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
@@ -409,14 +454,28 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENODEV;
}
+ if (!ci->platdata->phy_mode)
+ ci->platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
+
+ if (!ci->platdata->dr_mode)
+ ci->platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
+
+ if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN)
+ ci->platdata->dr_mode = USB_DR_MODE_OTG;
+
+ dr_mode = ci->platdata->dr_mode;
/* initialize role(s) before the interrupt is requested */
- ret = ci_hdrc_host_init(ci);
- if (ret)
- dev_info(dev, "doesn't support host\n");
+ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+ ret = ci_hdrc_host_init(ci);
+ if (ret)
+ dev_info(dev, "doesn't support host\n");
+ }
- ret = ci_hdrc_gadget_init(ci);
- if (ret)
- dev_info(dev, "doesn't support gadget\n");
+ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+ ret = ci_hdrc_gadget_init(ci);
+ if (ret)
+ dev_info(dev, "doesn't support gadget\n");
+ }
if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
dev_err(dev, "no supported roles\n");
@@ -467,7 +526,7 @@ rm_wq:
static int ci_hdrc_remove(struct platform_device *pdev)
{
- struct ci13xxx *ci = platform_get_drvdata(pdev);
+ struct ci_hdrc *ci = platform_get_drvdata(pdev);
dbg_remove_files(ci);
flush_workqueue(ci->wq);
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 36a7063a6cb..96d899aee47 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -18,7 +18,7 @@
*/
static int ci_device_show(struct seq_file *s, void *data)
{
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
struct usb_gadget *gadget = &ci->gadget;
seq_printf(s, "speed = %d\n", gadget->speed);
@@ -58,7 +58,7 @@ static const struct file_operations ci_device_fops = {
*/
static int ci_port_test_show(struct seq_file *s, void *data)
{
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
unsigned long flags;
unsigned mode;
@@ -78,7 +78,7 @@ static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
unsigned long flags;
unsigned mode;
char buf[32];
@@ -115,7 +115,7 @@ static const struct file_operations ci_port_test_fops = {
*/
static int ci_qheads_show(struct seq_file *s, void *data)
{
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
unsigned long flags;
unsigned i, j;
@@ -126,15 +126,15 @@ static int ci_qheads_show(struct seq_file *s, void *data)
spin_lock_irqsave(&ci->lock, flags);
for (i = 0; i < ci->hw_ep_max/2; i++) {
- struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i];
- struct ci13xxx_ep *mEpTx =
- &ci->ci13xxx_ep[i + ci->hw_ep_max/2];
+ struct ci_hw_ep *hweprx = &ci->ci_hw_ep[i];
+ struct ci_hw_ep *hweptx =
+ &ci->ci_hw_ep[i + ci->hw_ep_max/2];
seq_printf(s, "EP=%02i: RX=%08X TX=%08X\n",
- i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
- for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++)
+ i, (u32)hweprx->qh.dma, (u32)hweptx->qh.dma);
+ for (j = 0; j < (sizeof(struct ci_hw_qh)/sizeof(u32)); j++)
seq_printf(s, " %04X: %08X %08X\n", j,
- *((u32 *)mEpRx->qh.ptr + j),
- *((u32 *)mEpTx->qh.ptr + j));
+ *((u32 *)hweprx->qh.ptr + j),
+ *((u32 *)hweptx->qh.ptr + j));
}
spin_unlock_irqrestore(&ci->lock, flags);
@@ -158,11 +158,12 @@ static const struct file_operations ci_qheads_fops = {
*/
static int ci_requests_show(struct seq_file *s, void *data)
{
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
unsigned long flags;
struct list_head *ptr = NULL;
- struct ci13xxx_req *req = NULL;
- unsigned i, j, qsize = sizeof(struct ci13xxx_td)/sizeof(u32);
+ struct ci_hw_req *req = NULL;
+ struct td_node *node, *tmpnode;
+ unsigned i, j, qsize = sizeof(struct ci_hw_td)/sizeof(u32);
if (ci->role != CI_ROLE_GADGET) {
seq_printf(s, "not in gadget mode\n");
@@ -171,16 +172,20 @@ static int ci_requests_show(struct seq_file *s, void *data)
spin_lock_irqsave(&ci->lock, flags);
for (i = 0; i < ci->hw_ep_max; i++)
- list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue) {
- req = list_entry(ptr, struct ci13xxx_req, queue);
-
- seq_printf(s, "EP=%02i: TD=%08X %s\n",
- i % (ci->hw_ep_max / 2), (u32)req->dma,
- ((i < ci->hw_ep_max/2) ? "RX" : "TX"));
-
- for (j = 0; j < qsize; j++)
- seq_printf(s, " %04X: %08X\n", j,
- *((u32 *)req->ptr + j));
+ list_for_each(ptr, &ci->ci_hw_ep[i].qh.queue) {
+ req = list_entry(ptr, struct ci_hw_req, queue);
+
+ list_for_each_entry_safe(node, tmpnode, &req->tds, td) {
+ seq_printf(s, "EP=%02i: TD=%08X %s\n",
+ i % (ci->hw_ep_max / 2),
+ (u32)node->dma,
+ ((i < ci->hw_ep_max/2) ?
+ "RX" : "TX"));
+
+ for (j = 0; j < qsize; j++)
+ seq_printf(s, " %04X: %08X\n", j,
+ *((u32 *)node->ptr + j));
+ }
}
spin_unlock_irqrestore(&ci->lock, flags);
@@ -201,7 +206,7 @@ static const struct file_operations ci_requests_fops = {
static int ci_role_show(struct seq_file *s, void *data)
{
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
seq_printf(s, "%s\n", ci_role(ci)->name);
@@ -212,7 +217,7 @@ static ssize_t ci_role_write(struct file *file, const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
- struct ci13xxx *ci = s->private;
+ struct ci_hdrc *ci = s->private;
enum ci_role role;
char buf[8];
int ret;
@@ -254,7 +259,7 @@ static const struct file_operations ci_role_fops = {
*
* This function returns an error code
*/
-int dbg_create_files(struct ci13xxx *ci)
+int dbg_create_files(struct ci_hdrc *ci)
{
struct dentry *dent;
@@ -295,7 +300,7 @@ err:
* dbg_remove_files: destroys the attribute interface
* @ci: device
*/
-void dbg_remove_files(struct ci13xxx *ci)
+void dbg_remove_files(struct ci_hdrc *ci)
{
debugfs_remove_recursive(ci->debugfs);
}
diff --git a/drivers/usb/chipidea/debug.h b/drivers/usb/chipidea/debug.h
index 7ca6ca0a24a..e16478c4a94 100644
--- a/drivers/usb/chipidea/debug.h
+++ b/drivers/usb/chipidea/debug.h
@@ -14,15 +14,15 @@
#define __DRIVERS_USB_CHIPIDEA_DEBUG_H
#ifdef CONFIG_USB_CHIPIDEA_DEBUG
-int dbg_create_files(struct ci13xxx *ci);
-void dbg_remove_files(struct ci13xxx *ci);
+int dbg_create_files(struct ci_hdrc *ci);
+void dbg_remove_files(struct ci_hdrc *ci);
#else
-static inline int dbg_create_files(struct ci13xxx *ci)
+static inline int dbg_create_files(struct ci_hdrc *ci)
{
return 0;
}
-static inline void dbg_remove_files(struct ci13xxx *ci)
+static inline void dbg_remove_files(struct ci_hdrc *ci)
{
}
#endif
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 8e9d31277c4..40d0fda4f66 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -33,12 +33,12 @@
static struct hc_driver __read_mostly ci_ehci_hc_driver;
-static irqreturn_t host_irq(struct ci13xxx *ci)
+static irqreturn_t host_irq(struct ci_hdrc *ci)
{
return usb_hcd_irq(ci->irq, ci->hcd);
}
-static int host_start(struct ci13xxx *ci)
+static int host_start(struct ci_hdrc *ci)
{
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
@@ -70,13 +70,13 @@ static int host_start(struct ci13xxx *ci)
else
ci->hcd = hcd;
- if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+ if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
return ret;
}
-static void host_stop(struct ci13xxx *ci)
+static void host_stop(struct ci_hdrc *ci)
{
struct usb_hcd *hcd = ci->hcd;
@@ -84,7 +84,7 @@ static void host_stop(struct ci13xxx *ci)
usb_put_hcd(hcd);
}
-int ci_hdrc_host_init(struct ci13xxx *ci)
+int ci_hdrc_host_init(struct ci_hdrc *ci)
{
struct ci_role_driver *rdrv;
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
index 761fb1fd6d9..058875c1533 100644
--- a/drivers/usb/chipidea/host.h
+++ b/drivers/usb/chipidea/host.h
@@ -3,11 +3,11 @@
#ifdef CONFIG_USB_CHIPIDEA_HOST
-int ci_hdrc_host_init(struct ci13xxx *ci);
+int ci_hdrc_host_init(struct ci_hdrc *ci);
#else
-static inline int ci_hdrc_host_init(struct ci13xxx *ci)
+static inline int ci_hdrc_host_init(struct ci_hdrc *ci)
{
return -ENXIO;
}
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b501346484a..e475fcda1d6 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -61,7 +61,7 @@ static inline int hw_ep_bit(int num, int dir)
return num + (dir ? 16 : 0);
}
-static inline int ep_to_bit(struct ci13xxx *ci, int n)
+static inline int ep_to_bit(struct ci_hdrc *ci, int n)
{
int fill = 16 - ci->hw_ep_max / 2;
@@ -77,7 +77,7 @@ static inline int ep_to_bit(struct ci13xxx *ci, int n)
*
* This function returns an error code
*/
-static int hw_device_state(struct ci13xxx *ci, u32 dma)
+static int hw_device_state(struct ci_hdrc *ci, u32 dma)
{
if (dma) {
hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
@@ -97,7 +97,7 @@ static int hw_device_state(struct ci13xxx *ci, u32 dma)
*
* This function returns an error code
*/
-static int hw_ep_flush(struct ci13xxx *ci, int num, int dir)
+static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
{
int n = hw_ep_bit(num, dir);
@@ -118,7 +118,7 @@ static int hw_ep_flush(struct ci13xxx *ci, int num, int dir)
*
* This function returns an error code
*/
-static int hw_ep_disable(struct ci13xxx *ci, int num, int dir)
+static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
{
hw_ep_flush(ci, num, dir);
hw_write(ci, OP_ENDPTCTRL + num,
@@ -134,7 +134,7 @@ static int hw_ep_disable(struct ci13xxx *ci, int num, int dir)
*
* This function returns an error code
*/
-static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type)
+static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
{
u32 mask, data;
@@ -168,7 +168,7 @@ static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type)
*
* This function returns 1 if endpoint halted
*/
-static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir)
+static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
{
u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
@@ -182,7 +182,7 @@ static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir)
*
* This function returns setup status
*/
-static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n)
+static int hw_test_and_clear_setup_status(struct ci_hdrc *ci, int n)
{
n = ep_to_bit(ci, n);
return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
@@ -196,7 +196,7 @@ static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n)
*
* This function returns an error code
*/
-static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl)
+static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
{
int n = hw_ep_bit(num, dir);
@@ -223,13 +223,13 @@ static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl)
*
* This function returns an error code
*/
-static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value)
+static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
{
if (value != 0 && value != 1)
return -EINVAL;
do {
- enum ci13xxx_regs reg = OP_ENDPTCTRL + num;
+ enum ci_hw_regs reg = OP_ENDPTCTRL + num;
u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
@@ -246,7 +246,7 @@ static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value)
*
* This function returns true if high speed port
*/
-static int hw_port_is_high_speed(struct ci13xxx *ci)
+static int hw_port_is_high_speed(struct ci_hdrc *ci)
{
return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
hw_read(ci, OP_PORTSC, PORTSC_HSP);
@@ -257,7 +257,7 @@ static int hw_port_is_high_speed(struct ci13xxx *ci)
*
* This function returns register data
*/
-static u32 hw_read_intr_enable(struct ci13xxx *ci)
+static u32 hw_read_intr_enable(struct ci_hdrc *ci)
{
return hw_read(ci, OP_USBINTR, ~0);
}
@@ -267,7 +267,7 @@ static u32 hw_read_intr_enable(struct ci13xxx *ci)
*
* This function returns register data
*/
-static u32 hw_read_intr_status(struct ci13xxx *ci)
+static u32 hw_read_intr_status(struct ci_hdrc *ci)
{
return hw_read(ci, OP_USBSTS, ~0);
}
@@ -279,7 +279,7 @@ static u32 hw_read_intr_status(struct ci13xxx *ci)
*
* This function returns complete status
*/
-static int hw_test_and_clear_complete(struct ci13xxx *ci, int n)
+static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
{
n = ep_to_bit(ci, n);
return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
@@ -291,7 +291,7 @@ static int hw_test_and_clear_complete(struct ci13xxx *ci, int n)
*
* This function returns active interrutps
*/
-static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
+static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
{
u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
@@ -305,7 +305,7 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
*
* This function returns guard value
*/
-static int hw_test_and_clear_setup_guard(struct ci13xxx *ci)
+static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
{
return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
}
@@ -316,7 +316,7 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *ci)
*
* This function returns guard value
*/
-static int hw_test_and_set_setup_guard(struct ci13xxx *ci)
+static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
{
return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
}
@@ -328,7 +328,7 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *ci)
* This function explicitly sets the address, without the "USBADRA" (advance)
* feature, which is not supported by older versions of the controller.
*/
-static void hw_usb_set_address(struct ci13xxx *ci, u8 value)
+static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
{
hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
value << __ffs(DEVICEADDR_USBADR));
@@ -340,7 +340,7 @@ static void hw_usb_set_address(struct ci13xxx *ci, u8 value)
*
* This function returns an error code
*/
-static int hw_usb_reset(struct ci13xxx *ci)
+static int hw_usb_reset(struct ci_hdrc *ci)
{
hw_usb_set_address(ci, 0);
@@ -368,11 +368,60 @@ static int hw_usb_reset(struct ci13xxx *ci)
/******************************************************************************
* UTIL block
*****************************************************************************/
+
+static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
+ unsigned length)
+{
+ int i;
+ u32 temp;
+ struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
+ GFP_ATOMIC);
+
+ if (node == NULL)
+ return -ENOMEM;
+
+ node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
+ &node->dma);
+ if (node->ptr == NULL) {
+ kfree(node);
+ return -ENOMEM;
+ }
+
+ memset(node->ptr, 0, sizeof(struct ci_hw_td));
+ node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
+ node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
+ node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+
+ temp = (u32) (hwreq->req.dma + hwreq->req.actual);
+ if (length) {
+ node->ptr->page[0] = cpu_to_le32(temp);
+ for (i = 1; i < TD_PAGE_COUNT; i++) {
+ u32 page = temp + i * CI_HDRC_PAGE_SIZE;
+ page &= ~TD_RESERVED_MASK;
+ node->ptr->page[i] = cpu_to_le32(page);
+ }
+ }
+
+ hwreq->req.actual += length;
+
+ if (!list_empty(&hwreq->tds)) {
+ /* get the last entry */
+ lastnode = list_entry(hwreq->tds.prev,
+ struct td_node, td);
+ lastnode->ptr->next = cpu_to_le32(node->dma);
+ }
+
+ INIT_LIST_HEAD(&node->td);
+ list_add_tail(&node->td, &hwreq->tds);
+
+ return 0;
+}
+
/**
* _usb_addr: calculates endpoint address from direction & number
* @ep: endpoint
*/
-static inline u8 _usb_addr(struct ci13xxx_ep *ep)
+static inline u8 _usb_addr(struct ci_hw_ep *ep)
{
return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
}
@@ -380,75 +429,73 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep)
/**
* _hardware_queue: configures a request at hardware level
* @gadget: gadget
- * @mEp: endpoint
+ * @hwep: endpoint
*
* This function returns an error code
*/
-static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
+static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
{
- struct ci13xxx *ci = mEp->ci;
- unsigned i;
+ struct ci_hdrc *ci = hwep->ci;
int ret = 0;
- unsigned length = mReq->req.length;
+ unsigned rest = hwreq->req.length;
+ int pages = TD_PAGE_COUNT;
+ struct td_node *firstnode, *lastnode;
/* don't queue twice */
- if (mReq->req.status == -EALREADY)
+ if (hwreq->req.status == -EALREADY)
return -EALREADY;
- mReq->req.status = -EALREADY;
-
- if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) {
- mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC,
- &mReq->zdma);
- if (mReq->zptr == NULL)
- return -ENOMEM;
+ hwreq->req.status = -EALREADY;
- memset(mReq->zptr, 0, sizeof(*mReq->zptr));
- mReq->zptr->next = cpu_to_le32(TD_TERMINATE);
- mReq->zptr->token = cpu_to_le32(TD_STATUS_ACTIVE);
- if (!mReq->req.no_interrupt)
- mReq->zptr->token |= cpu_to_le32(TD_IOC);
- }
- ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir);
+ ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir);
if (ret)
return ret;
/*
- * TD configuration
- * TODO - handle requests which spawns into several TDs
+ * The first buffer could be not page aligned.
+ * In that case we have to span into one extra td.
*/
- memset(mReq->ptr, 0, sizeof(*mReq->ptr));
- mReq->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
- mReq->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
- mReq->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
- if (mReq->zptr) {
- mReq->ptr->next = cpu_to_le32(mReq->zdma);
- } else {
- mReq->ptr->next = cpu_to_le32(TD_TERMINATE);
- if (!mReq->req.no_interrupt)
- mReq->ptr->token |= cpu_to_le32(TD_IOC);
- }
- mReq->ptr->page[0] = cpu_to_le32(mReq->req.dma);
- for (i = 1; i < TD_PAGE_COUNT; i++) {
- u32 page = mReq->req.dma + i * CI13XXX_PAGE_SIZE;
- page &= ~TD_RESERVED_MASK;
- mReq->ptr->page[i] = cpu_to_le32(page);
+ if (hwreq->req.dma % PAGE_SIZE)
+ pages--;
+
+ if (rest == 0)
+ add_td_to_list(hwep, hwreq, 0);
+
+ while (rest > 0) {
+ unsigned count = min(hwreq->req.length - hwreq->req.actual,
+ (unsigned)(pages * CI_HDRC_PAGE_SIZE));
+ add_td_to_list(hwep, hwreq, count);
+ rest -= count;
}
+ if (hwreq->req.zero && hwreq->req.length
+ && (hwreq->req.length % hwep->ep.maxpacket == 0))
+ add_td_to_list(hwep, hwreq, 0);
+
+ firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
+
+ lastnode = list_entry(hwreq->tds.prev,
+ struct td_node, td);
+
+ lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
+ if (!hwreq->req.no_interrupt)
+ lastnode->ptr->token |= cpu_to_le32(TD_IOC);
wmb();
- if (!list_empty(&mEp->qh.queue)) {
- struct ci13xxx_req *mReqPrev;
- int n = hw_ep_bit(mEp->num, mEp->dir);
+ hwreq->req.actual = 0;
+ if (!list_empty(&hwep->qh.queue)) {
+ struct ci_hw_req *hwreqprev;
+ int n = hw_ep_bit(hwep->num, hwep->dir);
int tmp_stat;
- u32 next = mReq->dma & TD_ADDR_MASK;
-
- mReqPrev = list_entry(mEp->qh.queue.prev,
- struct ci13xxx_req, queue);
- if (mReqPrev->zptr)
- mReqPrev->zptr->next = cpu_to_le32(next);
- else
- mReqPrev->ptr->next = cpu_to_le32(next);
+ struct td_node *prevlastnode;
+ u32 next = firstnode->dma & TD_ADDR_MASK;
+
+ hwreqprev = list_entry(hwep->qh.queue.prev,
+ struct ci_hw_req, queue);
+ prevlastnode = list_entry(hwreqprev->tds.prev,
+ struct td_node, td);
+
+ prevlastnode->ptr->next = cpu_to_le32(next);
wmb();
if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
goto done;
@@ -462,99 +509,152 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
}
/* QH configuration */
- mEp->qh.ptr->td.next = cpu_to_le32(mReq->dma); /* TERMINATE = 0 */
- mEp->qh.ptr->td.token &=
+ hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
+ hwep->qh.ptr->td.token &=
cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC) {
+ u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+ if (hwreq->req.length % hwep->ep.maxpacket)
+ mul++;
+ hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
+ }
+
wmb(); /* synchronize before ep prime */
- ret = hw_ep_prime(ci, mEp->num, mEp->dir,
- mEp->type == USB_ENDPOINT_XFER_CONTROL);
+ ret = hw_ep_prime(ci, hwep->num, hwep->dir,
+ hwep->type == USB_ENDPOINT_XFER_CONTROL);
done:
return ret;
}
+/*
+ * free_pending_td: remove a pending request for the endpoint
+ * @hwep: endpoint
+ */
+static void free_pending_td(struct ci_hw_ep *hwep)
+{
+ struct td_node *pending = hwep->pending_td;
+
+ dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
+ hwep->pending_td = NULL;
+ kfree(pending);
+}
+
/**
* _hardware_dequeue: handles a request at hardware level
* @gadget: gadget
- * @mEp: endpoint
+ * @hwep: endpoint
*
* This function returns an error code
*/
-static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
+static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
{
- u32 tmptoken = le32_to_cpu(mReq->ptr->token);
+ u32 tmptoken;
+ struct td_node *node, *tmpnode;
+ unsigned remaining_length;
+ unsigned actual = hwreq->req.length;
- if (mReq->req.status != -EALREADY)
+ if (hwreq->req.status != -EALREADY)
return -EINVAL;
- if ((TD_STATUS_ACTIVE & tmptoken) != 0)
- return -EBUSY;
+ hwreq->req.status = 0;
- if (mReq->zptr) {
- if ((cpu_to_le32(TD_STATUS_ACTIVE) & mReq->zptr->token) != 0)
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ tmptoken = le32_to_cpu(node->ptr->token);
+ if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
+ hwreq->req.status = -EALREADY;
return -EBUSY;
- dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
- mReq->zptr = NULL;
- }
+ }
- mReq->req.status = 0;
+ remaining_length = (tmptoken & TD_TOTAL_BYTES);
+ remaining_length >>= __ffs(TD_TOTAL_BYTES);
+ actual -= remaining_length;
+
+ hwreq->req.status = tmptoken & TD_STATUS;
+ if ((TD_STATUS_HALTED & hwreq->req.status)) {
+ hwreq->req.status = -EPIPE;
+ break;
+ } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
+ hwreq->req.status = -EPROTO;
+ break;
+ } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
+ hwreq->req.status = -EILSEQ;
+ break;
+ }
- usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir);
+ if (remaining_length) {
+ if (hwep->dir) {
+ hwreq->req.status = -EPROTO;
+ break;
+ }
+ }
+ /*
+ * As the hardware could still address the freed td
+ * which will run the udc unusable, the cleanup of the
+ * td has to be delayed by one.
+ */
+ if (hwep->pending_td)
+ free_pending_td(hwep);
- mReq->req.status = tmptoken & TD_STATUS;
- if ((TD_STATUS_HALTED & mReq->req.status) != 0)
- mReq->req.status = -1;
- else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0)
- mReq->req.status = -1;
- else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0)
- mReq->req.status = -1;
+ hwep->pending_td = node;
+ list_del_init(&node->td);
+ }
- mReq->req.actual = tmptoken & TD_TOTAL_BYTES;
- mReq->req.actual >>= __ffs(TD_TOTAL_BYTES);
- mReq->req.actual = mReq->req.length - mReq->req.actual;
- mReq->req.actual = mReq->req.status ? 0 : mReq->req.actual;
+ usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir);
- return mReq->req.actual;
+ hwreq->req.actual += actual;
+
+ if (hwreq->req.status)
+ return hwreq->req.status;
+
+ return hwreq->req.actual;
}
/**
* _ep_nuke: dequeues all endpoint requests
- * @mEp: endpoint
+ * @hwep: endpoint
*
* This function returns an error code
* Caller must hold lock
*/
-static int _ep_nuke(struct ci13xxx_ep *mEp)
-__releases(mEp->lock)
-__acquires(mEp->lock)
+static int _ep_nuke(struct ci_hw_ep *hwep)
+__releases(hwep->lock)
+__acquires(hwep->lock)
{
- if (mEp == NULL)
+ struct td_node *node, *tmpnode;
+ if (hwep == NULL)
return -EINVAL;
- hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
- while (!list_empty(&mEp->qh.queue)) {
+ while (!list_empty(&hwep->qh.queue)) {
/* pop oldest request */
- struct ci13xxx_req *mReq = \
- list_entry(mEp->qh.queue.next,
- struct ci13xxx_req, queue);
-
- if (mReq->zptr) {
- dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
- mReq->zptr = NULL;
+ struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
+ struct ci_hw_req, queue);
+
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+ list_del_init(&node->td);
+ node->ptr = NULL;
+ kfree(node);
}
- list_del_init(&mReq->queue);
- mReq->req.status = -ESHUTDOWN;
+ list_del_init(&hwreq->queue);
+ hwreq->req.status = -ESHUTDOWN;
- if (mReq->req.complete != NULL) {
- spin_unlock(mEp->lock);
- mReq->req.complete(&mEp->ep, &mReq->req);
- spin_lock(mEp->lock);
+ if (hwreq->req.complete != NULL) {
+ spin_unlock(hwep->lock);
+ hwreq->req.complete(&hwep->ep, &hwreq->req);
+ spin_lock(hwep->lock);
}
}
+
+ if (hwep->pending_td)
+ free_pending_td(hwep);
+
return 0;
}
@@ -567,7 +667,7 @@ __acquires(mEp->lock)
static int _gadget_stop_activity(struct usb_gadget *gadget)
{
struct usb_ep *ep;
- struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
unsigned long flags;
spin_lock_irqsave(&ci->lock, flags);
@@ -608,7 +708,7 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
*
* This function resets USB engine after a bus reset occurred
*/
-static void isr_reset_handler(struct ci13xxx *ci)
+static void isr_reset_handler(struct ci_hdrc *ci)
__releases(ci->lock)
__acquires(ci->lock)
{
@@ -658,47 +758,48 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
gfp_t __maybe_unused gfp_flags)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
- struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
- struct ci13xxx *ci = mEp->ci;
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+ struct ci_hdrc *ci = hwep->ci;
int retval = 0;
- if (ep == NULL || req == NULL || mEp->ep.desc == NULL)
+ if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
return -EINVAL;
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
if (req->length)
- mEp = (ci->ep0_dir == RX) ?
+ hwep = (ci->ep0_dir == RX) ?
ci->ep0out : ci->ep0in;
- if (!list_empty(&mEp->qh.queue)) {
- _ep_nuke(mEp);
+ if (!list_empty(&hwep->qh.queue)) {
+ _ep_nuke(hwep);
retval = -EOVERFLOW;
- dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n",
- _usb_addr(mEp));
+ dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
+ _usb_addr(hwep));
}
}
- /* first nuke then test link, e.g. previous status has not sent */
- if (!list_empty(&mReq->queue)) {
- dev_err(mEp->ci->dev, "request already in queue\n");
- return -EBUSY;
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
+ hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) {
+ dev_err(hwep->ci->dev, "request length too big for isochronous\n");
+ return -EMSGSIZE;
}
- if (req->length > (TD_PAGE_COUNT - 1) * CI13XXX_PAGE_SIZE) {
- dev_err(mEp->ci->dev, "request bigger than one td\n");
- return -EMSGSIZE;
+ /* first nuke then test link, e.g. previous status has not sent */
+ if (!list_empty(&hwreq->queue)) {
+ dev_err(hwep->ci->dev, "request already in queue\n");
+ return -EBUSY;
}
/* push request */
- mReq->req.status = -EINPROGRESS;
- mReq->req.actual = 0;
+ hwreq->req.status = -EINPROGRESS;
+ hwreq->req.actual = 0;
- retval = _hardware_enqueue(mEp, mReq);
+ retval = _hardware_enqueue(hwep, hwreq);
if (retval == -EALREADY)
retval = 0;
if (!retval)
- list_add_tail(&mReq->queue, &mEp->qh.queue);
+ list_add_tail(&hwreq->queue, &hwep->qh.queue);
return retval;
}
@@ -710,22 +811,22 @@ static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
*
* This function returns an error code
*/
-static int isr_get_status_response(struct ci13xxx *ci,
+static int isr_get_status_response(struct ci_hdrc *ci,
struct usb_ctrlrequest *setup)
-__releases(mEp->lock)
-__acquires(mEp->lock)
+__releases(hwep->lock)
+__acquires(hwep->lock)
{
- struct ci13xxx_ep *mEp = ci->ep0in;
+ struct ci_hw_ep *hwep = ci->ep0in;
struct usb_request *req = NULL;
gfp_t gfp_flags = GFP_ATOMIC;
int dir, num, retval;
- if (mEp == NULL || setup == NULL)
+ if (hwep == NULL || setup == NULL)
return -EINVAL;
- spin_unlock(mEp->lock);
- req = usb_ep_alloc_request(&mEp->ep, gfp_flags);
- spin_lock(mEp->lock);
+ spin_unlock(hwep->lock);
+ req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
+ spin_lock(hwep->lock);
if (req == NULL)
return -ENOMEM;
@@ -750,7 +851,7 @@ __acquires(mEp->lock)
}
/* else do nothing; reserved for future use */
- retval = _ep_queue(&mEp->ep, req, gfp_flags);
+ retval = _ep_queue(&hwep->ep, req, gfp_flags);
if (retval)
goto err_free_buf;
@@ -759,9 +860,9 @@ __acquires(mEp->lock)
err_free_buf:
kfree(req->buf);
err_free_req:
- spin_unlock(mEp->lock);
- usb_ep_free_request(&mEp->ep, req);
- spin_lock(mEp->lock);
+ spin_unlock(hwep->lock);
+ usb_ep_free_request(&hwep->ep, req);
+ spin_lock(hwep->lock);
return retval;
}
@@ -776,7 +877,7 @@ __acquires(mEp->lock)
static void
isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct ci13xxx *ci = req->context;
+ struct ci_hdrc *ci = req->context;
unsigned long flags;
if (ci->setaddr) {
@@ -796,48 +897,48 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
*
* This function returns an error code
*/
-static int isr_setup_status_phase(struct ci13xxx *ci)
+static int isr_setup_status_phase(struct ci_hdrc *ci)
{
int retval;
- struct ci13xxx_ep *mEp;
+ struct ci_hw_ep *hwep;
- mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
+ hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
ci->status->context = ci;
ci->status->complete = isr_setup_status_complete;
- retval = _ep_queue(&mEp->ep, ci->status, GFP_ATOMIC);
+ retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
return retval;
}
/**
* isr_tr_complete_low: transaction complete low level handler
- * @mEp: endpoint
+ * @hwep: endpoint
*
* This function returns an error code
* Caller must hold lock
*/
-static int isr_tr_complete_low(struct ci13xxx_ep *mEp)
-__releases(mEp->lock)
-__acquires(mEp->lock)
+static int isr_tr_complete_low(struct ci_hw_ep *hwep)
+__releases(hwep->lock)
+__acquires(hwep->lock)
{
- struct ci13xxx_req *mReq, *mReqTemp;
- struct ci13xxx_ep *mEpTemp = mEp;
+ struct ci_hw_req *hwreq, *hwreqtemp;
+ struct ci_hw_ep *hweptemp = hwep;
int retval = 0;
- list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
+ list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
queue) {
- retval = _hardware_dequeue(mEp, mReq);
+ retval = _hardware_dequeue(hwep, hwreq);
if (retval < 0)
break;
- list_del_init(&mReq->queue);
- if (mReq->req.complete != NULL) {
- spin_unlock(mEp->lock);
- if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
- mReq->req.length)
- mEpTemp = mEp->ci->ep0in;
- mReq->req.complete(&mEpTemp->ep, &mReq->req);
- spin_lock(mEp->lock);
+ list_del_init(&hwreq->queue);
+ if (hwreq->req.complete != NULL) {
+ spin_unlock(hwep->lock);
+ if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
+ hwreq->req.length)
+ hweptemp = hwep->ci->ep0in;
+ hwreq->req.complete(&hweptemp->ep, &hwreq->req);
+ spin_lock(hwep->lock);
}
}
@@ -853,7 +954,7 @@ __acquires(mEp->lock)
*
* This function handles traffic events
*/
-static void isr_tr_complete_handler(struct ci13xxx *ci)
+static void isr_tr_complete_handler(struct ci_hdrc *ci)
__releases(ci->lock)
__acquires(ci->lock)
{
@@ -861,21 +962,21 @@ __acquires(ci->lock)
u8 tmode = 0;
for (i = 0; i < ci->hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
int type, num, dir, err = -EINVAL;
struct usb_ctrlrequest req;
- if (mEp->ep.desc == NULL)
+ if (hwep->ep.desc == NULL)
continue; /* not configured */
if (hw_test_and_clear_complete(ci, i)) {
- err = isr_tr_complete_low(mEp);
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
+ err = isr_tr_complete_low(hwep);
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
if (err > 0) /* needs status phase */
err = isr_setup_status_phase(ci);
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&mEp->ep))
+ if (usb_ep_set_halt(&hwep->ep))
dev_err(ci->dev,
"error: ep_set_halt\n");
spin_lock(&ci->lock);
@@ -883,7 +984,7 @@ __acquires(ci->lock)
}
}
- if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
+ if (hwep->type != USB_ENDPOINT_XFER_CONTROL ||
!hw_test_and_clear_setup_status(ci, i))
continue;
@@ -902,7 +1003,7 @@ __acquires(ci->lock)
/* read_setup_packet */
do {
hw_test_and_set_setup_guard(ci);
- memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
+ memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
} while (!hw_test_and_clear_setup_guard(ci));
type = req.bRequestType;
@@ -921,10 +1022,10 @@ __acquires(ci->lock)
num &= USB_ENDPOINT_NUMBER_MASK;
if (dir) /* TX */
num += ci->hw_ep_max/2;
- if (!ci->ci13xxx_ep[num].wedge) {
+ if (!ci->ci_hw_ep[num].wedge) {
spin_unlock(&ci->lock);
err = usb_ep_clear_halt(
- &ci->ci13xxx_ep[num].ep);
+ &ci->ci_hw_ep[num].ep);
spin_lock(&ci->lock);
if (err)
break;
@@ -974,7 +1075,7 @@ __acquires(ci->lock)
num += ci->hw_ep_max/2;
spin_unlock(&ci->lock);
- err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep);
+ err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
spin_lock(&ci->lock);
if (!err)
isr_setup_status_phase(ci);
@@ -1021,7 +1122,7 @@ delegate:
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&mEp->ep))
+ if (usb_ep_set_halt(&hwep->ep))
dev_err(ci->dev, "error: ep_set_halt\n");
spin_lock(&ci->lock);
}
@@ -1039,7 +1140,7 @@ delegate:
static int ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
int retval = 0;
unsigned long flags;
u32 cap = 0;
@@ -1047,39 +1148,41 @@ static int ep_enable(struct usb_ep *ep,
if (ep == NULL || desc == NULL)
return -EINVAL;
- spin_lock_irqsave(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
/* only internal SW should enable ctrl endpts */
- mEp->ep.desc = desc;
+ hwep->ep.desc = desc;
- if (!list_empty(&mEp->qh.queue))
- dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n");
+ if (!list_empty(&hwep->qh.queue))
+ dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
- mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX;
- mEp->num = usb_endpoint_num(desc);
- mEp->type = usb_endpoint_type(desc);
+ hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX;
+ hwep->num = usb_endpoint_num(desc);
+ hwep->type = usb_endpoint_type(desc);
- mEp->ep.maxpacket = usb_endpoint_maxp(desc);
+ hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff;
+ hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc));
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
cap |= QH_IOS;
- if (mEp->num)
+ if (hwep->num)
cap |= QH_ZLT;
- cap |= (mEp->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+ cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
- mEp->qh.ptr->cap = cpu_to_le32(cap);
+ hwep->qh.ptr->cap = cpu_to_le32(cap);
- mEp->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
+ hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
/*
* Enable endpoints in the HW other than ep0 as ep0
* is always enabled
*/
- if (mEp->num)
- retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type);
+ if (hwep->num)
+ retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
+ hwep->type);
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
return retval;
}
@@ -1090,32 +1193,32 @@ static int ep_enable(struct usb_ep *ep,
*/
static int ep_disable(struct usb_ep *ep)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
int direction, retval = 0;
unsigned long flags;
if (ep == NULL)
return -EINVAL;
- else if (mEp->ep.desc == NULL)
+ else if (hwep->ep.desc == NULL)
return -EBUSY;
- spin_lock_irqsave(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
/* only internal SW should disable ctrl endpts */
- direction = mEp->dir;
+ direction = hwep->dir;
do {
- retval |= _ep_nuke(mEp);
- retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir);
+ retval |= _ep_nuke(hwep);
+ retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
- mEp->dir = (mEp->dir == TX) ? RX : TX;
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
- } while (mEp->dir != direction);
+ } while (hwep->dir != direction);
- mEp->ep.desc = NULL;
+ hwep->ep.desc = NULL;
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
return retval;
}
@@ -1126,25 +1229,18 @@ static int ep_disable(struct usb_ep *ep)
*/
static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
- struct ci13xxx_req *mReq = NULL;
+ struct ci_hw_req *hwreq = NULL;
if (ep == NULL)
return NULL;
- mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
- if (mReq != NULL) {
- INIT_LIST_HEAD(&mReq->queue);
-
- mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
- &mReq->dma);
- if (mReq->ptr == NULL) {
- kfree(mReq);
- mReq = NULL;
- }
+ hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
+ if (hwreq != NULL) {
+ INIT_LIST_HEAD(&hwreq->queue);
+ INIT_LIST_HEAD(&hwreq->tds);
}
- return (mReq == NULL) ? NULL : &mReq->req;
+ return (hwreq == NULL) ? NULL : &hwreq->req;
}
/**
@@ -1154,24 +1250,30 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
*/
static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
- struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+ struct td_node *node, *tmpnode;
unsigned long flags;
if (ep == NULL || req == NULL) {
return;
- } else if (!list_empty(&mReq->queue)) {
- dev_err(mEp->ci->dev, "freeing queued request\n");
+ } else if (!list_empty(&hwreq->queue)) {
+ dev_err(hwep->ci->dev, "freeing queued request\n");
return;
}
- spin_lock_irqsave(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
- if (mReq->ptr)
- dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma);
- kfree(mReq);
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+ list_del_init(&node->td);
+ node->ptr = NULL;
+ kfree(node);
+ }
+
+ kfree(hwreq);
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
}
/**
@@ -1182,16 +1284,16 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
static int ep_queue(struct usb_ep *ep, struct usb_request *req,
gfp_t __maybe_unused gfp_flags)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
int retval = 0;
unsigned long flags;
- if (ep == NULL || req == NULL || mEp->ep.desc == NULL)
+ if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
return -EINVAL;
- spin_lock_irqsave(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
retval = _ep_queue(ep, req, gfp_flags);
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
return retval;
}
@@ -1202,33 +1304,33 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
*/
static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
- struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
unsigned long flags;
- if (ep == NULL || req == NULL || mReq->req.status != -EALREADY ||
- mEp->ep.desc == NULL || list_empty(&mReq->queue) ||
- list_empty(&mEp->qh.queue))
+ if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
+ hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
+ list_empty(&hwep->qh.queue))
return -EINVAL;
- spin_lock_irqsave(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
- hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
/* pop request */
- list_del_init(&mReq->queue);
+ list_del_init(&hwreq->queue);
- usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir);
+ usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
req->status = -ECONNRESET;
- if (mReq->req.complete != NULL) {
- spin_unlock(mEp->lock);
- mReq->req.complete(&mEp->ep, &mReq->req);
- spin_lock(mEp->lock);
+ if (hwreq->req.complete != NULL) {
+ spin_unlock(hwep->lock);
+ hwreq->req.complete(&hwep->ep, &hwreq->req);
+ spin_lock(hwep->lock);
}
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
return 0;
}
@@ -1239,37 +1341,40 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
*/
static int ep_set_halt(struct usb_ep *ep, int value)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
int direction, retval = 0;
unsigned long flags;
- if (ep == NULL || mEp->ep.desc == NULL)
+ if (ep == NULL || hwep->ep.desc == NULL)
return -EINVAL;
- spin_lock_irqsave(mEp->lock, flags);
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(hwep->lock, flags);
#ifndef STALL_IN
/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
- if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
- !list_empty(&mEp->qh.queue)) {
- spin_unlock_irqrestore(mEp->lock, flags);
+ if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
+ !list_empty(&hwep->qh.queue)) {
+ spin_unlock_irqrestore(hwep->lock, flags);
return -EAGAIN;
}
#endif
- direction = mEp->dir;
+ direction = hwep->dir;
do {
- retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value);
+ retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
if (!value)
- mEp->wedge = 0;
+ hwep->wedge = 0;
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
- mEp->dir = (mEp->dir == TX) ? RX : TX;
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
- } while (mEp->dir != direction);
+ } while (hwep->dir != direction);
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
return retval;
}
@@ -1280,15 +1385,15 @@ static int ep_set_halt(struct usb_ep *ep, int value)
*/
static int ep_set_wedge(struct usb_ep *ep)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
unsigned long flags;
- if (ep == NULL || mEp->ep.desc == NULL)
+ if (ep == NULL || hwep->ep.desc == NULL)
return -EINVAL;
- spin_lock_irqsave(mEp->lock, flags);
- mEp->wedge = 1;
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
+ hwep->wedge = 1;
+ spin_unlock_irqrestore(hwep->lock, flags);
return usb_ep_set_halt(ep);
}
@@ -1300,19 +1405,19 @@ static int ep_set_wedge(struct usb_ep *ep)
*/
static void ep_fifo_flush(struct usb_ep *ep)
{
- struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
unsigned long flags;
if (ep == NULL) {
- dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
+ dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
return;
}
- spin_lock_irqsave(mEp->lock, flags);
+ spin_lock_irqsave(hwep->lock, flags);
- hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
- spin_unlock_irqrestore(mEp->lock, flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
}
/**
@@ -1334,13 +1439,13 @@ static const struct usb_ep_ops usb_ep_ops = {
/******************************************************************************
* GADGET block
*****************************************************************************/
-static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
+static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
{
- struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
unsigned long flags;
int gadget_ready = 0;
- if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
+ if (!(ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS))
return -EOPNOTSUPP;
spin_lock_irqsave(&ci->lock, flags);
@@ -1358,7 +1463,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
- CI13XXX_CONTROLLER_STOPPED_EVENT);
+ CI_HDRC_CONTROLLER_STOPPED_EVENT);
_gadget_stop_activity(&ci->gadget);
pm_runtime_put_sync(&_gadget->dev);
}
@@ -1367,9 +1472,9 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
return 0;
}
-static int ci13xxx_wakeup(struct usb_gadget *_gadget)
+static int ci_udc_wakeup(struct usb_gadget *_gadget)
{
- struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
unsigned long flags;
int ret = 0;
@@ -1388,21 +1493,21 @@ out:
return ret;
}
-static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
{
- struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
if (ci->transceiver)
- return usb_phy_set_power(ci->transceiver, mA);
+ return usb_phy_set_power(ci->transceiver, ma);
return -ENOTSUPP;
}
/* Change Data+ pullup status
* this func is used by usb_gadget_connect/disconnet
*/
-static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
+static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
{
- struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
if (is_on)
hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
@@ -1412,9 +1517,9 @@ static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
return 0;
}
-static int ci13xxx_start(struct usb_gadget *gadget,
+static int ci_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
-static int ci13xxx_stop(struct usb_gadget *gadget,
+static int ci_udc_stop(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
/**
* Device operations part of the API to the USB controller hardware,
@@ -1422,46 +1527,46 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
* Check "usb_gadget.h" for details
*/
static const struct usb_gadget_ops usb_gadget_ops = {
- .vbus_session = ci13xxx_vbus_session,
- .wakeup = ci13xxx_wakeup,
- .pullup = ci13xxx_pullup,
- .vbus_draw = ci13xxx_vbus_draw,
- .udc_start = ci13xxx_start,
- .udc_stop = ci13xxx_stop,
+ .vbus_session = ci_udc_vbus_session,
+ .wakeup = ci_udc_wakeup,
+ .pullup = ci_udc_pullup,
+ .vbus_draw = ci_udc_vbus_draw,
+ .udc_start = ci_udc_start,
+ .udc_stop = ci_udc_stop,
};
-static int init_eps(struct ci13xxx *ci)
+static int init_eps(struct ci_hdrc *ci)
{
int retval = 0, i, j;
for (i = 0; i < ci->hw_ep_max/2; i++)
for (j = RX; j <= TX; j++) {
int k = i + j * ci->hw_ep_max/2;
- struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k];
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
- scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
+ scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
(j == TX) ? "in" : "out");
- mEp->ci = ci;
- mEp->lock = &ci->lock;
- mEp->td_pool = ci->td_pool;
+ hwep->ci = ci;
+ hwep->lock = &ci->lock;
+ hwep->td_pool = ci->td_pool;
- mEp->ep.name = mEp->name;
- mEp->ep.ops = &usb_ep_ops;
+ hwep->ep.name = hwep->name;
+ hwep->ep.ops = &usb_ep_ops;
/*
* for ep0: maxP defined in desc, for other
* eps, maxP is set by epautoconfig() called
* by gadget layer
*/
- mEp->ep.maxpacket = (unsigned short)~0;
+ hwep->ep.maxpacket = (unsigned short)~0;
- INIT_LIST_HEAD(&mEp->qh.queue);
- mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
- &mEp->qh.dma);
- if (mEp->qh.ptr == NULL)
+ INIT_LIST_HEAD(&hwep->qh.queue);
+ hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
+ &hwep->qh.dma);
+ if (hwep->qh.ptr == NULL)
retval = -ENOMEM;
else
- memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
+ memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
/*
* set up shorthands for ep0 out and in endpoints,
@@ -1469,42 +1574,42 @@ static int init_eps(struct ci13xxx *ci)
*/
if (i == 0) {
if (j == RX)
- ci->ep0out = mEp;
+ ci->ep0out = hwep;
else
- ci->ep0in = mEp;
+ ci->ep0in = hwep;
- mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+ hwep->ep.maxpacket = CTRL_PAYLOAD_MAX;
continue;
}
- list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list);
+ list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
}
return retval;
}
-static void destroy_eps(struct ci13xxx *ci)
+static void destroy_eps(struct ci_hdrc *ci)
{
int i;
for (i = 0; i < ci->hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
- dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+ dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
}
}
/**
- * ci13xxx_start: register a gadget driver
+ * ci_udc_start: register a gadget driver
* @gadget: our gadget
* @driver: the driver being registered
*
* Interrupts are enabled here.
*/
-static int ci13xxx_start(struct usb_gadget *gadget,
+static int ci_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
- struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
unsigned long flags;
int retval = -ENOMEM;
@@ -1525,9 +1630,9 @@ static int ci13xxx_start(struct usb_gadget *gadget,
ci->driver = driver;
pm_runtime_get_sync(&ci->gadget.dev);
- if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
+ if (ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS) {
if (ci->vbus_active) {
- if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+ if (ci->platdata->flags & CI_HDRC_REGS_SHARED)
hw_device_reset(ci, USBMODE_CM_DC);
} else {
pm_runtime_put_sync(&ci->gadget.dev);
@@ -1545,22 +1650,22 @@ static int ci13xxx_start(struct usb_gadget *gadget,
}
/**
- * ci13xxx_stop: unregister a gadget driver
+ * ci_udc_stop: unregister a gadget driver
*/
-static int ci13xxx_stop(struct usb_gadget *gadget,
+static int ci_udc_stop(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
- struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
unsigned long flags;
spin_lock_irqsave(&ci->lock, flags);
- if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
+ if (!(ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS) ||
ci->vbus_active) {
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
- CI13XXX_CONTROLLER_STOPPED_EVENT);
+ CI_HDRC_CONTROLLER_STOPPED_EVENT);
ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
_gadget_stop_activity(&ci->gadget);
@@ -1582,7 +1687,7 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
* This function returns IRQ_HANDLED if the IRQ has been handled
* It locks access to registers
*/
-static irqreturn_t udc_irq(struct ci13xxx *ci)
+static irqreturn_t udc_irq(struct ci_hdrc *ci)
{
irqreturn_t retval;
u32 intr;
@@ -1592,7 +1697,7 @@ static irqreturn_t udc_irq(struct ci13xxx *ci)
spin_lock(&ci->lock);
- if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
+ if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
USBMODE_CM_DC) {
spin_unlock(&ci->lock);
@@ -1642,7 +1747,7 @@ static irqreturn_t udc_irq(struct ci13xxx *ci)
* udc_start: initialize gadget role
* @ci: chipidea controller
*/
-static int udc_start(struct ci13xxx *ci)
+static int udc_start(struct ci_hdrc *ci)
{
struct device *dev = ci->dev;
int retval = 0;
@@ -1658,15 +1763,15 @@ static int udc_start(struct ci13xxx *ci)
INIT_LIST_HEAD(&ci->gadget.ep_list);
/* alloc resources */
- ci->qh_pool = dma_pool_create("ci13xxx_qh", dev,
- sizeof(struct ci13xxx_qh),
- 64, CI13XXX_PAGE_SIZE);
+ ci->qh_pool = dma_pool_create("ci_hw_qh", dev,
+ sizeof(struct ci_hw_qh),
+ 64, CI_HDRC_PAGE_SIZE);
if (ci->qh_pool == NULL)
return -ENOMEM;
- ci->td_pool = dma_pool_create("ci13xxx_td", dev,
- sizeof(struct ci13xxx_td),
- 64, CI13XXX_PAGE_SIZE);
+ ci->td_pool = dma_pool_create("ci_hw_td", dev,
+ sizeof(struct ci_hw_td),
+ 64, CI_HDRC_PAGE_SIZE);
if (ci->td_pool == NULL) {
retval = -ENOMEM;
goto free_qh_pool;
@@ -1684,14 +1789,14 @@ static int udc_start(struct ci13xxx *ci)
ci->transceiver = NULL;
}
- if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+ if (ci->platdata->flags & CI_HDRC_REQUIRE_TRANSCEIVER) {
if (ci->transceiver == NULL) {
retval = -ENODEV;
goto destroy_eps;
}
}
- if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) {
+ if (!(ci->platdata->flags & CI_HDRC_REGS_SHARED)) {
retval = hw_device_reset(ci, USBMODE_CM_DC);
if (retval)
goto put_transceiver;
@@ -1738,7 +1843,7 @@ free_qh_pool:
*
* No interrupts active, the IRQ has been released
*/
-static void udc_stop(struct ci13xxx *ci)
+static void udc_stop(struct ci_hdrc *ci)
{
if (ci == NULL)
return;
@@ -1765,7 +1870,7 @@ static void udc_stop(struct ci13xxx *ci)
*
* This function enables the gadget role, if the device is "device capable".
*/
-int ci_hdrc_gadget_init(struct ci13xxx *ci)
+int ci_hdrc_gadget_init(struct ci_hdrc *ci)
{
struct ci_role_driver *rdrv;
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index d12e8b59b11..455ac216922 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -20,7 +20,7 @@
#define TX 1 /* similar to USB_DIR_IN but can be used as an index */
/* DMA layout of transfer descriptors */
-struct ci13xxx_td {
+struct ci_hw_td {
/* 0 */
u32 next;
#define TD_TERMINATE BIT(0)
@@ -43,24 +43,31 @@ struct ci13xxx_td {
} __attribute__ ((packed, aligned(4)));
/* DMA layout of queue heads */
-struct ci13xxx_qh {
+struct ci_hw_qh {
/* 0 */
u32 cap;
#define QH_IOS BIT(15)
#define QH_MAX_PKT (0x07FFUL << 16)
#define QH_ZLT BIT(29)
#define QH_MULT (0x0003UL << 30)
+#define QH_ISO_MULT(x) ((x >> 11) & 0x03)
/* 1 */
u32 curr;
/* 2 - 8 */
- struct ci13xxx_td td;
+ struct ci_hw_td td;
/* 9 */
u32 RESERVED;
struct usb_ctrlrequest setup;
} __attribute__ ((packed, aligned(4)));
+struct td_node {
+ struct list_head td;
+ dma_addr_t dma;
+ struct ci_hw_td *ptr;
+};
+
/**
- * struct ci13xxx_req - usb request representation
+ * struct ci_hw_req - usb request representation
* @req: request structure for gadget drivers
* @queue: link to QH list
* @ptr: transfer descriptor for this request
@@ -68,22 +75,19 @@ struct ci13xxx_qh {
* @zptr: transfer descriptor for the zero packet
* @zdma: dma address of the zero packet's transfer descriptor
*/
-struct ci13xxx_req {
+struct ci_hw_req {
struct usb_request req;
struct list_head queue;
- struct ci13xxx_td *ptr;
- dma_addr_t dma;
- struct ci13xxx_td *zptr;
- dma_addr_t zdma;
+ struct list_head tds;
};
#ifdef CONFIG_USB_CHIPIDEA_UDC
-int ci_hdrc_gadget_init(struct ci13xxx *ci);
+int ci_hdrc_gadget_init(struct ci_hdrc *ci);
#else
-static inline int ci_hdrc_gadget_init(struct ci13xxx *ci)
+static inline int ci_hdrc_gadget_init(struct ci_hdrc *ci)
{
return -ENXIO;
}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 714a6bd810e..ac5a4615520 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -16,7 +16,7 @@
#include <linux/io.h>
#include <linux/delay.h>
-#include "ci13xxx_imx.h"
+#include "ci_hdrc_imx.h"
#define USB_DEV_MAX 4
@@ -175,6 +175,7 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
},
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
static int usbmisc_imx_probe(struct platform_device *pdev)
{
@@ -243,17 +244,7 @@ static struct platform_driver usbmisc_imx_driver = {
},
};
-int usbmisc_imx_drv_init(void)
-{
- return platform_driver_register(&usbmisc_imx_driver);
-}
-subsys_initcall(usbmisc_imx_drv_init);
-
-void usbmisc_imx_drv_exit(void)
-{
- platform_driver_unregister(&usbmisc_imx_driver);
-}
-module_exit(usbmisc_imx_drv_exit);
+module_platform_driver(usbmisc_imx_driver);
MODULE_ALIAS("platform:usbmisc-imx");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 9b1cbcf8fb7..9f49bfe4c6f 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -216,38 +216,6 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
return rc;
}
-static int acm_write_start(struct acm *acm, int wbn)
-{
- unsigned long flags;
- struct acm_wb *wb = &acm->wb[wbn];
- int rc;
-
- spin_lock_irqsave(&acm->write_lock, flags);
- if (!acm->dev) {
- wb->use = 0;
- spin_unlock_irqrestore(&acm->write_lock, flags);
- return -ENODEV;
- }
-
- dev_vdbg(&acm->data->dev, "%s - susp_count %d\n", __func__,
- acm->susp_count);
- usb_autopm_get_interface_async(acm->control);
- if (acm->susp_count) {
- if (!acm->delayed_wb)
- acm->delayed_wb = wb;
- else
- usb_autopm_put_interface_async(acm->control);
- spin_unlock_irqrestore(&acm->write_lock, flags);
- return 0; /* A white lie */
- }
- usb_mark_last_busy(acm->dev);
-
- rc = acm_start_wb(acm, wb);
- spin_unlock_irqrestore(&acm->write_lock, flags);
-
- return rc;
-
-}
/*
* attributes exported through sysfs
*/
@@ -653,13 +621,31 @@ static int acm_tty_write(struct tty_struct *tty,
}
wb = &acm->wb[wbn];
+ if (!acm->dev) {
+ wb->use = 0;
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return -ENODEV;
+ }
+
count = (count > acm->writesize) ? acm->writesize : count;
dev_vdbg(&acm->data->dev, "%s - write %d\n", __func__, count);
memcpy(wb->buf, buf, count);
wb->len = count;
+
+ usb_autopm_get_interface_async(acm->control);
+ if (acm->susp_count) {
+ if (!acm->delayed_wb)
+ acm->delayed_wb = wb;
+ else
+ usb_autopm_put_interface_async(acm->control);
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return count; /* A white lie */
+ }
+ usb_mark_last_busy(acm->dev);
+
+ stat = acm_start_wb(acm, wb);
spin_unlock_irqrestore(&acm->write_lock, flags);
- stat = acm_write_start(acm, wbn);
if (stat < 0)
return stat;
return count;
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 4c5506ae5e4..609dbc2f715 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -31,6 +31,8 @@
#include <linux/usb/tmc.h>
+#define RIGOL 1
+#define USBTMC_HEADER_SIZE 12
#define USBTMC_MINOR_BASE 176
/*
@@ -84,6 +86,8 @@ struct usbtmc_device_data {
u8 bTag_last_write; /* needed for abort */
u8 bTag_last_read; /* needed for abort */
+ u8 rigol_quirk;
+
/* attributes from the USB TMC spec for this device */
u8 TermChar;
bool TermCharEnabled;
@@ -97,6 +101,16 @@ struct usbtmc_device_data {
};
#define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref)
+struct usbtmc_ID_rigol_quirk {
+ __u16 idVendor;
+ __u16 idProduct;
+};
+
+static const struct usbtmc_ID_rigol_quirk usbtmc_id_quirk[] = {
+ { 0x1ab1, 0x0588 },
+ { 0, 0 }
+};
+
/* Forward declarations */
static struct usb_driver usbtmc_driver;
@@ -361,6 +375,59 @@ exit:
return rv;
}
+/*
+ * Sends a REQUEST_DEV_DEP_MSG_IN message on the Bulk-IN endpoint.
+ * @transfer_size: number of bytes to request from the device.
+ *
+ * See the USBTMC specification, Table 4.
+ *
+ * Also updates bTag_last_write.
+ */
+static int send_request_dev_dep_msg_in(struct usbtmc_device_data *data, size_t transfer_size)
+{
+ int retval;
+ u8 buffer[USBTMC_HEADER_SIZE];
+ int actual;
+
+ /* Setup IO buffer for REQUEST_DEV_DEP_MSG_IN message
+ * Refer to class specs for details
+ */
+ buffer[0] = 2;
+ buffer[1] = data->bTag;
+ buffer[2] = ~(data->bTag);
+ buffer[3] = 0; /* Reserved */
+ buffer[4] = (transfer_size) & 255;
+ buffer[5] = ((transfer_size) >> 8) & 255;
+ buffer[6] = ((transfer_size) >> 16) & 255;
+ buffer[7] = ((transfer_size) >> 24) & 255;
+ buffer[8] = data->TermCharEnabled * 2;
+ /* Use term character? */
+ buffer[9] = data->TermChar;
+ buffer[10] = 0; /* Reserved */
+ buffer[11] = 0; /* Reserved */
+
+ /* Send bulk URB */
+ retval = usb_bulk_msg(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev,
+ data->bulk_out),
+ buffer, USBTMC_HEADER_SIZE, &actual, USBTMC_TIMEOUT);
+
+ /* Store bTag (in case we need to abort) */
+ data->bTag_last_write = data->bTag;
+
+ /* Increment bTag -- and increment again if zero */
+ data->bTag++;
+ if (!data->bTag)
+ (data->bTag)++;
+
+ if (retval < 0) {
+ dev_err(&data->intf->dev, "usb_bulk_msg in send_request_dev_dep_msg_in() returned %d\n", retval);
+ return retval;
+ }
+
+ return 0;
+}
+
static ssize_t usbtmc_read(struct file *filp, char __user *buf,
size_t count, loff_t *f_pos)
{
@@ -388,51 +455,39 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
goto exit;
}
- remaining = count;
- done = 0;
+ if (data->rigol_quirk) {
+ dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count);
- while (remaining > 0) {
- if (remaining > USBTMC_SIZE_IOBUFFER - 12 - 3)
- this_part = USBTMC_SIZE_IOBUFFER - 12 - 3;
- else
- this_part = remaining;
+ retval = send_request_dev_dep_msg_in(data, count);
- /* Setup IO buffer for DEV_DEP_MSG_IN message
- * Refer to class specs for details
- */
- buffer[0] = 2;
- buffer[1] = data->bTag;
- buffer[2] = ~(data->bTag);
- buffer[3] = 0; /* Reserved */
- buffer[4] = (this_part) & 255;
- buffer[5] = ((this_part) >> 8) & 255;
- buffer[6] = ((this_part) >> 16) & 255;
- buffer[7] = ((this_part) >> 24) & 255;
- buffer[8] = data->TermCharEnabled * 2;
- /* Use term character? */
- buffer[9] = data->TermChar;
- buffer[10] = 0; /* Reserved */
- buffer[11] = 0; /* Reserved */
+ if (retval < 0) {
+ if (data->auto_abort)
+ usbtmc_ioctl_abort_bulk_out(data);
+ goto exit;
+ }
+ }
- /* Send bulk URB */
- retval = usb_bulk_msg(data->usb_dev,
- usb_sndbulkpipe(data->usb_dev,
- data->bulk_out),
- buffer, 12, &actual, USBTMC_TIMEOUT);
+ /* Loop until we have fetched everything we requested */
+ remaining = count;
+ this_part = remaining;
+ done = 0;
- /* Store bTag (in case we need to abort) */
- data->bTag_last_write = data->bTag;
+ while (remaining > 0) {
+ if (!(data->rigol_quirk)) {
+ dev_dbg(dev, "usb_bulk_msg_in: remaining(%zu), count(%zu)\n", remaining, count);
- /* Increment bTag -- and increment again if zero */
- data->bTag++;
- if (!data->bTag)
- (data->bTag)++;
+ if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3)
+ this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3;
+ else
+ this_part = remaining;
- if (retval < 0) {
+ retval = send_request_dev_dep_msg_in(data, this_part);
+ if (retval < 0) {
dev_err(dev, "usb_bulk_msg returned %d\n", retval);
- if (data->auto_abort)
- usbtmc_ioctl_abort_bulk_out(data);
- goto exit;
+ if (data->auto_abort)
+ usbtmc_ioctl_abort_bulk_out(data);
+ goto exit;
+ }
}
/* Send bulk URB */
@@ -442,51 +497,109 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
buffer, USBTMC_SIZE_IOBUFFER, &actual,
USBTMC_TIMEOUT);
+ dev_dbg(dev, "usb_bulk_msg: retval(%u), done(%zu), remaining(%zu), actual(%d)\n", retval, done, remaining, actual);
+
/* Store bTag (in case we need to abort) */
data->bTag_last_read = data->bTag;
if (retval < 0) {
- dev_err(dev, "Unable to read data, error %d\n", retval);
+ dev_dbg(dev, "Unable to read data, error %d\n", retval);
if (data->auto_abort)
usbtmc_ioctl_abort_bulk_in(data);
goto exit;
}
- /* How many characters did the instrument send? */
- n_characters = buffer[4] +
- (buffer[5] << 8) +
- (buffer[6] << 16) +
- (buffer[7] << 24);
+ /* Parse header in first packet */
+ if ((done == 0) || (!(data->rigol_quirk))) {
+ /* Sanity checks for the header */
+ if (actual < USBTMC_HEADER_SIZE) {
+ dev_err(dev, "Device sent too small first packet: %u < %u\n", actual, USBTMC_HEADER_SIZE);
+ if (data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
- /* Ensure the instrument doesn't lie about it */
- if(n_characters > actual - 12) {
- dev_err(dev, "Device lies about message size: %u > %d\n", n_characters, actual - 12);
- n_characters = actual - 12;
- }
+ if (buffer[0] != 2) {
+ dev_err(dev, "Device sent reply with wrong MsgID: %u != 2\n", buffer[0]);
+ if (data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
- /* Ensure the instrument doesn't send more back than requested */
- if(n_characters > this_part) {
- dev_err(dev, "Device returns more than requested: %zu > %zu\n", done + n_characters, done + this_part);
- n_characters = this_part;
- }
+ if (buffer[1] != data->bTag_last_write) {
+ dev_err(dev, "Device sent reply with wrong bTag: %u != %u\n", buffer[1], data->bTag_last_write);
+ if (data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
- /* Bound amount of data received by amount of data requested */
- if (n_characters > this_part)
- n_characters = this_part;
+ /* How many characters did the instrument send? */
+ n_characters = buffer[4] +
+ (buffer[5] << 8) +
+ (buffer[6] << 16) +
+ (buffer[7] << 24);
- /* Copy buffer to user space */
- if (copy_to_user(buf + done, &buffer[12], n_characters)) {
- /* There must have been an addressing problem */
- retval = -EFAULT;
- goto exit;
+ if (n_characters > this_part) {
+ dev_err(dev, "Device wants to return more data than requested: %u > %zu\n", n_characters, count);
+ if (data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
+
+ /* Remove the USBTMC header */
+ actual -= USBTMC_HEADER_SIZE;
+
+ /* Check if the message is smaller than requested */
+ if (data->rigol_quirk) {
+ if (remaining > n_characters)
+ remaining = n_characters;
+ /* Remove padding if it exists */
+ if (actual > remaining)
+ actual = remaining;
+ }
+ else {
+ if (this_part > n_characters)
+ this_part = n_characters;
+ /* Remove padding if it exists */
+ if (actual > this_part)
+ actual = this_part;
+ }
+
+ dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n", n_characters, buffer[8]);
+
+ remaining -= actual;
+
+ /* Terminate if end-of-message bit received from device */
+ if ((buffer[8] & 0x01) && (actual >= n_characters))
+ remaining = 0;
+
+ dev_dbg(dev, "Bulk-IN header: remaining(%zu), buf(%p), buffer(%p) done(%zu)\n", remaining,buf,buffer,done);
+
+
+ /* Copy buffer to user space */
+ if (copy_to_user(buf + done, &buffer[USBTMC_HEADER_SIZE], actual)) {
+ /* There must have been an addressing problem */
+ retval = -EFAULT;
+ goto exit;
+ }
+ done += actual;
}
+ else {
+ if (actual > remaining)
+ actual = remaining;
+
+ remaining -= actual;
+
+ dev_dbg(dev, "Bulk-IN header cont: actual(%u), done(%zu), remaining(%zu), buf(%p), buffer(%p)\n", actual, done, remaining,buf,buffer);
- done += n_characters;
- /* Terminate if end-of-message bit received from device */
- if ((buffer[8] & 0x01) && (actual >= n_characters + 12))
- remaining = 0;
- else
- remaining -= n_characters;
+ /* Copy buffer to user space */
+ if (copy_to_user(buf + done, buffer, actual)) {
+ /* There must have been an addressing problem */
+ retval = -EFAULT;
+ goto exit;
+ }
+ done += actual;
+ }
}
/* Update file position value */
@@ -527,8 +640,8 @@ static ssize_t usbtmc_write(struct file *filp, const char __user *buf,
done = 0;
while (remaining > 0) {
- if (remaining > USBTMC_SIZE_IOBUFFER - 12) {
- this_part = USBTMC_SIZE_IOBUFFER - 12;
+ if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE) {
+ this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE;
buffer[8] = 0;
} else {
this_part = remaining;
@@ -549,13 +662,13 @@ static ssize_t usbtmc_write(struct file *filp, const char __user *buf,
buffer[10] = 0; /* Reserved */
buffer[11] = 0; /* Reserved */
- if (copy_from_user(&buffer[12], buf + done, this_part)) {
+ if (copy_from_user(&buffer[USBTMC_HEADER_SIZE], buf + done, this_part)) {
retval = -EFAULT;
goto exit;
}
- n_bytes = roundup(12 + this_part, 4);
- memset(buffer + 12 + this_part, 0, n_bytes - (12 + this_part));
+ n_bytes = roundup(USBTMC_HEADER_SIZE + this_part, 4);
+ memset(buffer + USBTMC_HEADER_SIZE + this_part, 0, n_bytes - (USBTMC_HEADER_SIZE + this_part));
do {
retval = usb_bulk_msg(data->usb_dev,
@@ -1003,6 +1116,20 @@ static int usbtmc_probe(struct usb_interface *intf,
mutex_init(&data->io_mutex);
data->zombie = 0;
+ /* Determine if it is a Rigol or not */
+ data->rigol_quirk = 0;
+ dev_dbg(&intf->dev, "Trying to find if device Vendor 0x%04X Product 0x%04X has the RIGOL quirk\n",
+ data->usb_dev->descriptor.idVendor,
+ data->usb_dev->descriptor.idProduct);
+ for(n = 0; usbtmc_id_quirk[n].idVendor > 0; n++) {
+ if ((usbtmc_id_quirk[n].idVendor == data->usb_dev->descriptor.idVendor) &&
+ (usbtmc_id_quirk[n].idProduct == data->usb_dev->descriptor.idProduct)) {
+ dev_dbg(&intf->dev, "Setting this device as having the RIGOL quirk\n");
+ data->rigol_quirk = 1;
+ break;
+ }
+ }
+
/* Initialize USBTMC bTag and other fields */
data->bTag = 1;
data->TermCharEnabled = 0;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index c88c4fb9459..05986507b58 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -49,14 +49,14 @@
#include <linux/security.h>
#include <linux/user_namespace.h>
#include <linux/scatterlist.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/byteorder.h>
#include <linux/moduleparam.h>
#include "usb.h"
#define USB_MAXBUS 64
-#define USB_DEVICE_MAX USB_MAXBUS * 128
+#define USB_DEVICE_MAX (USB_MAXBUS * 128)
#define USB_SG_SIZE 16384 /* split-size for large txs */
/* Mutual exclusion for removal, open, and release */
@@ -1804,7 +1804,8 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
/* alloc buffer */
if ((size = _IOC_SIZE(ctl->ioctl_code)) > 0) {
- if ((buf = kmalloc(size, GFP_KERNEL)) == NULL)
+ buf = kmalloc(size, GFP_KERNEL);
+ if (buf == NULL)
return -ENOMEM;
if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) {
if (copy_from_user(buf, ctl->data, size)) {
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index e5387a47ef6..6a4c40766f0 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -94,7 +94,7 @@ static int init_usb_class(void)
kref_init(&usb_class->kref);
usb_class->class = class_create(THIS_MODULE, "usbmisc");
if (IS_ERR(usb_class->class)) {
- result = IS_ERR(usb_class->class);
+ result = PTR_ERR(usb_class->class);
printk(KERN_ERR "class_create failed for usb devices\n");
kfree(usb_class);
usb_class = NULL;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d53547d2e4c..014dc996b4f 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -149,6 +149,27 @@ static const u8 usb3_rh_dev_descriptor[18] = {
0x01 /* __u8 bNumConfigurations; */
};
+/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
+static const u8 usb25_rh_dev_descriptor[18] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
+
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
+ 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
+
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
+ 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
+ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
+
+ 0x03, /* __u8 iManufacturer; */
+ 0x02, /* __u8 iProduct; */
+ 0x01, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
/* usb 2.0 root hub device descriptor */
static const u8 usb2_rh_dev_descriptor [18] = {
0x12, /* __u8 bLength; */
@@ -527,6 +548,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
case HCD_USB3:
bufp = usb3_rh_dev_descriptor;
break;
+ case HCD_USB25:
+ bufp = usb25_rh_dev_descriptor;
+ break;
case HCD_USB2:
bufp = usb2_rh_dev_descriptor;
break;
@@ -546,6 +570,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
bufp = ss_rh_config_descriptor;
len = sizeof ss_rh_config_descriptor;
break;
+ case HCD_USB25:
case HCD_USB2:
bufp = hs_rh_config_descriptor;
len = sizeof hs_rh_config_descriptor;
@@ -2511,6 +2536,9 @@ int usb_add_hcd(struct usb_hcd *hcd,
case HCD_USB2:
rhdev->speed = USB_SPEED_HIGH;
break;
+ case HCD_USB25:
+ rhdev->speed = USB_SPEED_WIRELESS;
+ break;
case HCD_USB3:
rhdev->speed = USB_SPEED_SUPER;
break;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index feef9351463..4191db32f12 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -718,18 +718,18 @@ static void hub_tt_work(struct work_struct *work)
/**
* usb_hub_set_port_power - control hub port's power state
- * @hdev: target hub
+ * @hdev: USB device belonging to the usb hub
+ * @hub: target hub
* @port1: port index
* @set: expected status
*
* call this function to control port's power via setting or
* clearing the port's PORT_POWER feature.
*/
-int usb_hub_set_port_power(struct usb_device *hdev, int port1,
- bool set)
+int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
+ int port1, bool set)
{
int ret;
- struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
struct usb_port *port_dev = hub->ports[port1 - 1];
if (set)
@@ -1769,15 +1769,17 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
static int find_port_owner(struct usb_device *hdev, unsigned port1,
struct dev_state ***ppowner)
{
+ struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
if (hdev->state == USB_STATE_NOTATTACHED)
return -ENODEV;
if (port1 == 0 || port1 > hdev->maxchild)
return -EINVAL;
- /* This assumes that devices not managed by the hub driver
+ /* Devices not managed by the hub driver
* will always have maxchild equal to 0.
*/
- *ppowner = &(usb_hub_to_struct_hub(hdev)->ports[port1 - 1]->port_owner);
+ *ppowner = &(hub->ports[port1 - 1]->port_owner);
return 0;
}
@@ -5323,7 +5325,8 @@ void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1,
{
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
- hub->ports[port1 - 1]->connect_type = type;
+ if (hub)
+ hub->ports[port1 - 1]->connect_type = type;
}
/**
@@ -5339,6 +5342,9 @@ usb_get_hub_port_connect_type(struct usb_device *hdev, int port1)
{
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+ if (!hub)
+ return USB_PORT_CONNECT_TYPE_UNKNOWN;
+
return hub->ports[port1 - 1]->connect_type;
}
@@ -5397,6 +5403,9 @@ acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
{
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+ if (!hub)
+ return NULL;
+
return DEVICE_ACPI_HANDLE(&hub->ports[port1 - 1]->dev);
}
#endif
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 80ab9ee0701..6508e02b3da 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -100,7 +100,7 @@ extern int usb_hub_create_port_device(struct usb_hub *hub,
int port1);
extern void usb_hub_remove_port_device(struct usb_hub *hub,
int port1);
-extern int usb_hub_set_port_power(struct usb_device *hdev,
+extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
int port1, bool set);
extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
extern int hub_port_debounce(struct usb_hub *hub, int port1,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 444d30e3a78..e7ee1e45166 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -252,7 +252,7 @@ static void sg_clean(struct usb_sg_request *io)
{
if (io->urbs) {
while (io->entries--)
- usb_free_urb(io->urbs [io->entries]);
+ usb_free_urb(io->urbs[io->entries]);
kfree(io->urbs);
io->urbs = NULL;
}
@@ -300,10 +300,10 @@ static void sg_complete(struct urb *urb)
*/
spin_unlock(&io->lock);
for (i = 0, found = 0; i < io->entries; i++) {
- if (!io->urbs [i] || !io->urbs [i]->dev)
+ if (!io->urbs[i] || !io->urbs[i]->dev)
continue;
if (found) {
- retval = usb_unlink_urb(io->urbs [i]);
+ retval = usb_unlink_urb(io->urbs[i]);
if (retval != -EINPROGRESS &&
retval != -ENODEV &&
retval != -EBUSY &&
@@ -311,7 +311,7 @@ static void sg_complete(struct urb *urb)
dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
__func__, retval);
- } else if (urb == io->urbs [i])
+ } else if (urb == io->urbs[i])
found = 1;
}
spin_lock(&io->lock);
@@ -379,7 +379,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
}
/* initialize all the urbs we'll use */
- io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+ io->urbs = kmalloc(io->entries * sizeof(*io->urbs), mem_flags);
if (!io->urbs)
goto nomem;
@@ -511,7 +511,7 @@ void usb_sg_wait(struct usb_sg_request *io)
int retval;
io->urbs[i]->dev = io->dev;
- retval = usb_submit_urb(io->urbs [i], GFP_ATOMIC);
+ retval = usb_submit_urb(io->urbs[i], GFP_ATOMIC);
/* after we submit, let completions or cancelations fire;
* we handshake using io->status.
@@ -586,9 +586,9 @@ void usb_sg_cancel(struct usb_sg_request *io)
for (i = 0; i < io->entries; i++) {
int retval;
- if (!io->urbs [i]->dev)
+ if (!io->urbs[i]->dev)
continue;
- retval = usb_unlink_urb(io->urbs [i]);
+ retval = usb_unlink_urb(io->urbs[i]);
if (retval != -EINPROGRESS
&& retval != -ENODEV
&& retval != -EBUSY
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index b8bad294eeb..5fd3fee58f8 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -86,7 +86,7 @@ static int usb_port_runtime_resume(struct device *dev)
usb_autopm_get_interface(intf);
set_bit(port1, hub->busy_bits);
- retval = usb_hub_set_port_power(hdev, port1, true);
+ retval = usb_hub_set_port_power(hdev, hub, port1, true);
if (port_dev->child && !retval) {
/*
* Wait for usb hub port to be reconnected in order to make
@@ -128,7 +128,7 @@ static int usb_port_runtime_suspend(struct device *dev)
usb_autopm_get_interface(intf);
set_bit(port1, hub->busy_bits);
- retval = usb_hub_set_port_power(hdev, port1, false);
+ retval = usb_hub_set_port_power(hdev, hub, port1, false);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
clear_bit(port1, hub->busy_bits);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index aa38db44818..d9284b998bd 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -497,8 +497,62 @@ set_usb2_hardware_lpm(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(usb2_hardware_lpm, S_IRUGO | S_IWUSR, show_usb2_hardware_lpm,
set_usb2_hardware_lpm);
+static ssize_t
+show_usb2_lpm_l1_timeout(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ return sprintf(buf, "%d\n", udev->l1_params.timeout);
+}
+
+static ssize_t
+set_usb2_lpm_l1_timeout(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ u16 timeout;
+
+ if (kstrtou16(buf, 0, &timeout))
+ return -EINVAL;
+
+ udev->l1_params.timeout = timeout;
+
+ return count;
+}
+
+static DEVICE_ATTR(usb2_lpm_l1_timeout, S_IRUGO | S_IWUSR,
+ show_usb2_lpm_l1_timeout, set_usb2_lpm_l1_timeout);
+
+static ssize_t
+show_usb2_lpm_besl(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ return sprintf(buf, "%d\n", udev->l1_params.besl);
+}
+
+static ssize_t
+set_usb2_lpm_besl(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ u8 besl;
+
+ if (kstrtou8(buf, 0, &besl) || besl > 15)
+ return -EINVAL;
+
+ udev->l1_params.besl = besl;
+
+ return count;
+}
+
+static DEVICE_ATTR(usb2_lpm_besl, S_IRUGO | S_IWUSR,
+ show_usb2_lpm_besl, set_usb2_lpm_besl);
+
static struct attribute *usb2_hardware_lpm_attr[] = {
&dev_attr_usb2_hardware_lpm.attr,
+ &dev_attr_usb2_lpm_l1_timeout.attr,
+ &dev_attr_usb2_lpm_besl.attr,
NULL,
};
static struct attribute_group usb2_hardware_lpm_attr_group = {
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index b10da720f2b..7dad603dde4 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -209,6 +209,39 @@ struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
}
EXPORT_SYMBOL_GPL(usb_find_interface);
+struct each_dev_arg {
+ void *data;
+ int (*fn)(struct usb_device *, void *);
+};
+
+static int __each_dev(struct device *dev, void *data)
+{
+ struct each_dev_arg *arg = (struct each_dev_arg *)data;
+
+ /* There are struct usb_interface on the same bus, filter them out */
+ if (!is_usb_device(dev))
+ return 0;
+
+ return arg->fn(container_of(dev, struct usb_device, dev), arg->data);
+}
+
+/**
+ * usb_for_each_dev - iterate over all USB devices in the system
+ * @data: data pointer that will be handed to the callback function
+ * @fn: callback function to be called for each USB device
+ *
+ * Iterate over all USB devices and call @fn for each, passing it @data. If it
+ * returns anything other than 0, we break the iteration prematurely and return
+ * that value.
+ */
+int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *))
+{
+ struct each_dev_arg arg = {data, fn};
+
+ return bus_for_each_dev(&usb_bus_type, NULL, &arg, __each_dev);
+}
+EXPORT_SYMBOL_GPL(usb_for_each_dev);
+
/**
* usb_release_dev - free a usb device structure when all users of it are finished.
* @dev: device that's been disconnected
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 34638b92500..077f110bd74 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -61,21 +61,46 @@
#define USBOTGSS_REVISION 0x0000
#define USBOTGSS_SYSCONFIG 0x0010
#define USBOTGSS_IRQ_EOI 0x0020
+#define USBOTGSS_EOI_OFFSET 0x0008
#define USBOTGSS_IRQSTATUS_RAW_0 0x0024
#define USBOTGSS_IRQSTATUS_0 0x0028
#define USBOTGSS_IRQENABLE_SET_0 0x002c
#define USBOTGSS_IRQENABLE_CLR_0 0x0030
-#define USBOTGSS_IRQSTATUS_RAW_1 0x0034
-#define USBOTGSS_IRQSTATUS_1 0x0038
-#define USBOTGSS_IRQENABLE_SET_1 0x003c
-#define USBOTGSS_IRQENABLE_CLR_1 0x0040
+#define USBOTGSS_IRQ0_OFFSET 0x0004
+#define USBOTGSS_IRQSTATUS_RAW_1 0x0030
+#define USBOTGSS_IRQSTATUS_1 0x0034
+#define USBOTGSS_IRQENABLE_SET_1 0x0038
+#define USBOTGSS_IRQENABLE_CLR_1 0x003c
+#define USBOTGSS_IRQSTATUS_RAW_2 0x0040
+#define USBOTGSS_IRQSTATUS_2 0x0044
+#define USBOTGSS_IRQENABLE_SET_2 0x0048
+#define USBOTGSS_IRQENABLE_CLR_2 0x004c
+#define USBOTGSS_IRQSTATUS_RAW_3 0x0050
+#define USBOTGSS_IRQSTATUS_3 0x0054
+#define USBOTGSS_IRQENABLE_SET_3 0x0058
+#define USBOTGSS_IRQENABLE_CLR_3 0x005c
+#define USBOTGSS_IRQSTATUS_EOI_MISC 0x0030
+#define USBOTGSS_IRQSTATUS_RAW_MISC 0x0034
+#define USBOTGSS_IRQSTATUS_MISC 0x0038
+#define USBOTGSS_IRQENABLE_SET_MISC 0x003c
+#define USBOTGSS_IRQENABLE_CLR_MISC 0x0040
+#define USBOTGSS_IRQMISC_OFFSET 0x03fc
#define USBOTGSS_UTMI_OTG_CTRL 0x0080
#define USBOTGSS_UTMI_OTG_STATUS 0x0084
+#define USBOTGSS_UTMI_OTG_OFFSET 0x0480
+#define USBOTGSS_TXFIFO_DEPTH 0x0508
+#define USBOTGSS_RXFIFO_DEPTH 0x050c
#define USBOTGSS_MMRAM_OFFSET 0x0100
#define USBOTGSS_FLADJ 0x0104
#define USBOTGSS_DEBUG_CFG 0x0108
#define USBOTGSS_DEBUG_DATA 0x010c
+#define USBOTGSS_DEV_EBC_EN 0x0110
+#define USBOTGSS_DEBUG_OFFSET 0x0600
+/* REVISION REGISTER */
+#define USBOTGSS_REVISION_XMAJOR(reg) ((reg >> 8) & 0x7)
+#define USBOTGSS_REVISION_XMAJOR1 1
+#define USBOTGSS_REVISION_XMAJOR2 2
/* SYSCONFIG REGISTER */
#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)
@@ -85,17 +110,17 @@
/* IRQS0 BITS */
#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0)
-/* IRQ1 BITS */
-#define USBOTGSS_IRQ1_DMADISABLECLR (1 << 17)
-#define USBOTGSS_IRQ1_OEVT (1 << 16)
-#define USBOTGSS_IRQ1_DRVVBUS_RISE (1 << 13)
-#define USBOTGSS_IRQ1_CHRGVBUS_RISE (1 << 12)
-#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE (1 << 11)
-#define USBOTGSS_IRQ1_IDPULLUP_RISE (1 << 8)
-#define USBOTGSS_IRQ1_DRVVBUS_FALL (1 << 5)
-#define USBOTGSS_IRQ1_CHRGVBUS_FALL (1 << 4)
-#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL (1 << 3)
-#define USBOTGSS_IRQ1_IDPULLUP_FALL (1 << 0)
+/* IRQMISC BITS */
+#define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17)
+#define USBOTGSS_IRQMISC_OEVT (1 << 16)
+#define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13)
+#define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11)
+#define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8)
+#define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5)
+#define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3)
+#define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0)
/* UTMI_OTG_CTRL REGISTER */
#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5)
@@ -122,6 +147,12 @@ struct dwc3_omap {
void __iomem *base;
u32 utmi_otg_status;
+ u32 utmi_otg_offset;
+ u32 irqmisc_offset;
+ u32 irq_eoi_offset;
+ u32 debug_offset;
+ u32 irq0_offset;
+ u32 revision;
u32 dma_status:1;
};
@@ -138,6 +169,58 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
writel(value, base + offset);
}
+static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap)
+{
+ return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS +
+ omap->utmi_otg_offset);
+}
+
+static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value)
+{
+ dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS +
+ omap->utmi_otg_offset, value);
+
+}
+
+static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
+{
+ return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 -
+ omap->irq0_offset);
+}
+
+static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value)
+{
+ dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 -
+ omap->irq0_offset, value);
+
+}
+
+static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
+{
+ return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC +
+ omap->irqmisc_offset);
+}
+
+static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value)
+{
+ dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC +
+ omap->irqmisc_offset, value);
+
+}
+
+static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value)
+{
+ dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC +
+ omap->irqmisc_offset, value);
+
+}
+
+static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
+{
+ dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 -
+ omap->irq0_offset, value);
+}
+
int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
{
u32 val;
@@ -150,38 +233,38 @@ int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
case OMAP_DWC3_ID_GROUND:
dev_dbg(omap->dev, "ID GND\n");
- val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+ val = dwc3_omap_read_utmi_status(omap);
val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
| USBOTGSS_UTMI_OTG_STATUS_SESSEND);
val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID
| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
- dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
+ dwc3_omap_write_utmi_status(omap, val);
break;
case OMAP_DWC3_VBUS_VALID:
dev_dbg(omap->dev, "VBUS Connect\n");
- val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+ val = dwc3_omap_read_utmi_status(omap);
val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND;
val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG
| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
| USBOTGSS_UTMI_OTG_STATUS_SESSVALID
| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
- dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
+ dwc3_omap_write_utmi_status(omap, val);
break;
case OMAP_DWC3_ID_FLOAT:
case OMAP_DWC3_VBUS_OFF:
dev_dbg(omap->dev, "VBUS Disconnect\n");
- val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+ val = dwc3_omap_read_utmi_status(omap);
val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID
| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT);
val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND
| USBOTGSS_UTMI_OTG_STATUS_IDDIG;
- dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
+ dwc3_omap_write_utmi_status(omap, val);
break;
default:
@@ -199,44 +282,45 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
spin_lock(&omap->lock);
- reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1);
+ reg = dwc3_omap_read_irqmisc_status(omap);
- if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
+ if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) {
dev_dbg(omap->dev, "DMA Disable was Cleared\n");
omap->dma_status = false;
}
- if (reg & USBOTGSS_IRQ1_OEVT)
+ if (reg & USBOTGSS_IRQMISC_OEVT)
dev_dbg(omap->dev, "OTG Event\n");
- if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE)
+ if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE)
dev_dbg(omap->dev, "DRVVBUS Rise\n");
- if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE)
+ if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE)
dev_dbg(omap->dev, "CHRGVBUS Rise\n");
- if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE)
+ if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE)
dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");
- if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE)
+ if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE)
dev_dbg(omap->dev, "IDPULLUP Rise\n");
- if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL)
+ if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL)
dev_dbg(omap->dev, "DRVVBUS Fall\n");
- if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL)
+ if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL)
dev_dbg(omap->dev, "CHRGVBUS Fall\n");
- if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL)
+ if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL)
dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");
- if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
+ if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL)
dev_dbg(omap->dev, "IDPULLUP Fall\n");
- dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
+ dwc3_omap_write_irqmisc_status(omap, reg);
+
+ reg = dwc3_omap_read_irq0_status(omap);
- reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0);
- dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
+ dwc3_omap_write_irq0_status(omap, reg);
spin_unlock(&omap->lock);
@@ -258,26 +342,26 @@ static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
/* enable all IRQs */
reg = USBOTGSS_IRQO_COREIRQ_ST;
- dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
-
- reg = (USBOTGSS_IRQ1_OEVT |
- USBOTGSS_IRQ1_DRVVBUS_RISE |
- USBOTGSS_IRQ1_CHRGVBUS_RISE |
- USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
- USBOTGSS_IRQ1_IDPULLUP_RISE |
- USBOTGSS_IRQ1_DRVVBUS_FALL |
- USBOTGSS_IRQ1_CHRGVBUS_FALL |
- USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
- USBOTGSS_IRQ1_IDPULLUP_FALL);
-
- dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+ dwc3_omap_write_irq0_set(omap, reg);
+
+ reg = (USBOTGSS_IRQMISC_OEVT |
+ USBOTGSS_IRQMISC_DRVVBUS_RISE |
+ USBOTGSS_IRQMISC_CHRGVBUS_RISE |
+ USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
+ USBOTGSS_IRQMISC_IDPULLUP_RISE |
+ USBOTGSS_IRQMISC_DRVVBUS_FALL |
+ USBOTGSS_IRQMISC_CHRGVBUS_FALL |
+ USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
+ USBOTGSS_IRQMISC_IDPULLUP_FALL);
+
+ dwc3_omap_write_irqmisc_set(omap, reg);
}
static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
{
/* disable all IRQs */
- dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, 0x00);
- dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x00);
+ dwc3_omap_write_irqmisc_set(omap, 0x00);
+ dwc3_omap_write_irq0_set(omap, 0x00);
}
static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);
@@ -294,6 +378,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
int irq;
int utmi_mode = 0;
+ int x_major;
u32 reg;
@@ -347,10 +432,46 @@ static int dwc3_omap_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "get_sync failed with err %d\n", ret);
- return ret;
+ goto err0;
}
- reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+ reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
+ omap->revision = reg;
+ x_major = USBOTGSS_REVISION_XMAJOR(reg);
+
+ /* Differentiate between OMAP5 and AM437x */
+ switch (x_major) {
+ case USBOTGSS_REVISION_XMAJOR1:
+ case USBOTGSS_REVISION_XMAJOR2:
+ omap->irq_eoi_offset = 0;
+ omap->irq0_offset = 0;
+ omap->irqmisc_offset = 0;
+ omap->utmi_otg_offset = 0;
+ omap->debug_offset = 0;
+ break;
+ default:
+ /* Default to the latest revision */
+ omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+ omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+ omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+ omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+ omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+ break;
+ }
+
+ /* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
+ * changes in wrapper registers, Using dt compatible for aegis
+ */
+
+ if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
+ omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+ omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+ omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+ omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+ omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+ }
+
+ reg = dwc3_omap_read_utmi_status(omap);
of_property_read_u32(node, "utmi-mode", &utmi_mode);
@@ -365,7 +486,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
}
- dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
+ dwc3_omap_write_utmi_status(omap, reg);
/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
@@ -376,7 +497,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "failed to request IRQ #%d --> %d\n",
omap->irq, ret);
- return ret;
+ goto err1;
}
dwc3_omap_enable_irqs(omap);
@@ -384,10 +505,21 @@ static int dwc3_omap_probe(struct platform_device *pdev)
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
- return ret;
+ goto err2;
}
return 0;
+
+err2:
+ dwc3_omap_disable_irqs(omap);
+
+err1:
+ pm_runtime_put_sync(dev);
+
+err0:
+ pm_runtime_disable(dev);
+
+ return ret;
}
static int dwc3_omap_remove(struct platform_device *pdev)
@@ -406,6 +538,9 @@ static const struct of_device_id of_dwc3_match[] = {
{
.compatible = "ti,dwc3"
},
+ {
+ .compatible = "ti,am437x-dwc3"
+ },
{ },
};
MODULE_DEVICE_TABLE(of, of_dwc3_match);
@@ -431,8 +566,7 @@ static int dwc3_omap_suspend(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
- omap->utmi_otg_status = dwc3_omap_readl(omap->base,
- USBOTGSS_UTMI_OTG_STATUS);
+ omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap);
return 0;
}
@@ -441,8 +575,7 @@ static int dwc3_omap_resume(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
- dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS,
- omap->utmi_otg_status);
+ dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status);
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index eba9e2baf32..ed07ec04a96 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -133,7 +133,6 @@ static int dwc3_pci_probe(struct pci_dev *pci,
return -ENODEV;
}
- pci_set_power_state(pci, PCI_D0);
pci_set_master(pci);
ret = dwc3_pci_register_phys(glue);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f41aa0d0c41..01b8229fa86 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -192,6 +192,16 @@ config USB_FUSB300
help
Faraday usb device controller FUSB300 driver
+config USB_FOTG210_UDC
+ tristate "Faraday FOTG210 USB Peripheral Controller"
+ help
+ Faraday USB2.0 OTG controller which can be configured as
+ high speed or full speed USB device. This driver supppors
+ Bulk Transfer so far.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "fotg210_udc".
+
config USB_OMAP
tristate "OMAP USB Device Controller"
depends on ARCH_OMAP1
@@ -334,14 +344,6 @@ config USB_MV_U3D
# Controllers available in both integrated and discrete versions
#
-# musb builds in ../musb along with host support
-config USB_GADGET_MUSB_HDRC
- tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
- depends on USB_MUSB_HDRC
- help
- This OTG-capable silicon IP is used in dual designs including
- the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
-
config USB_M66592
tristate "Renesas M66592 USB Peripheral Controller"
help
@@ -507,12 +509,36 @@ config USB_F_SS_LB
config USB_U_SERIAL
tristate
+config USB_U_ETHER
+ tristate
+
+config USB_U_RNDIS
+ tristate
+
config USB_F_SERIAL
tristate
config USB_F_OBEX
tristate
+config USB_F_NCM
+ tristate
+
+config USB_F_ECM
+ tristate
+
+config USB_F_PHONET
+ tristate
+
+config USB_F_EEM
+ tristate
+
+config USB_F_SUBSET
+ tristate
+
+config USB_F_RNDIS
+ tristate
+
choice
tristate "USB Gadget Drivers"
default USB_ETH
@@ -534,6 +560,121 @@ choice
# this first set of drivers all depend on bulk-capable hardware.
+config USB_CONFIGFS
+ tristate "USB functions configurable through configfs"
+ select USB_LIBCOMPOSITE
+ help
+ A Linux USB "gadget" can be set up through configfs.
+ If this is the case, the USB functions (which from the host's
+ perspective are seen as interfaces) and configurations are
+ specified simply by creating appropriate directories in configfs.
+ Associating functions with configurations is done by creating
+ appropriate symbolic links.
+ For more information see Documentation/usb/gadget-configfs.txt.
+
+config USB_CONFIGFS_SERIAL
+ boolean "Generic serial bulk in/out"
+ depends on USB_CONFIGFS
+ depends on TTY
+ select USB_U_SERIAL
+ select USB_F_SERIAL
+ help
+ The function talks to the Linux-USB generic serial driver.
+
+config USB_CONFIGFS_ACM
+ boolean "Abstract Control Model (CDC ACM)"
+ depends on USB_CONFIGFS
+ depends on TTY
+ select USB_U_SERIAL
+ select USB_F_ACM
+ help
+ ACM serial link. This function can be used to interoperate with
+ MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
+
+config USB_CONFIGFS_OBEX
+ boolean "Object Exchange Model (CDC OBEX)"
+ depends on USB_CONFIGFS
+ depends on TTY
+ select USB_U_SERIAL
+ select USB_F_OBEX
+ help
+ You will need a user space OBEX server talking to /dev/ttyGS*,
+ since the kernel itself doesn't implement the OBEX protocol.
+
+config USB_CONFIGFS_NCM
+ boolean "Network Control Model (CDC NCM)"
+ depends on USB_CONFIGFS
+ depends on NET
+ select USB_U_ETHER
+ select USB_F_NCM
+ help
+ NCM is an advanced protocol for Ethernet encapsulation, allows
+ grouping of several ethernet frames into one USB transfer and
+ different alignment possibilities.
+
+config USB_CONFIGFS_ECM
+ boolean "Ethernet Control Model (CDC ECM)"
+ depends on USB_CONFIGFS
+ depends on NET
+ select USB_U_ETHER
+ select USB_F_ECM
+ help
+ The "Communication Device Class" (CDC) Ethernet Control Model.
+ That protocol is often avoided with pure Ethernet adapters, in
+ favor of simpler vendor-specific hardware, but is widely
+ supported by firmware for smart network devices.
+
+config USB_CONFIGFS_ECM_SUBSET
+ boolean "Ethernet Control Model (CDC ECM) subset"
+ depends on USB_CONFIGFS
+ depends on NET
+ select USB_U_ETHER
+ select USB_F_SUBSET
+ help
+ On hardware that can't implement the full protocol,
+ a simple CDC subset is used, placing fewer demands on USB.
+
+config USB_CONFIGFS_RNDIS
+ bool "RNDIS"
+ depends on USB_CONFIGFS
+ depends on NET
+ select USB_U_ETHER
+ select USB_F_RNDIS
+ help
+ Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
+ and Microsoft provides redistributable binary RNDIS drivers for
+ older versions of Windows.
+
+ To make MS-Windows work with this, use Documentation/usb/linux.inf
+ as the "driver info file". For versions of MS-Windows older than
+ XP, you'll need to download drivers from Microsoft's website; a URL
+ is given in comments found in that info file.
+
+config USB_CONFIGFS_EEM
+ bool "Ethernet Emulation Model (EEM)"
+ depends on USB_CONFIGFS
+ depends on NET
+ select USB_U_ETHER
+ select USB_F_EEM
+ help
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+config USB_CONFIGFS_PHONET
+ boolean "Phonet protocol"
+ depends on USB_CONFIGFS
+ depends on NET
+ depends on PHONET
+ select USB_U_ETHER
+ select USB_F_PHONET
+ help
+ The Phonet protocol implementation for USB device.
+
config USB_ZERO
tristate "Gadget Zero (DEVELOPMENT)"
select USB_LIBCOMPOSITE
@@ -603,6 +744,10 @@ config USB_ETH
tristate "Ethernet Gadget (with CDC Ethernet support)"
depends on NET
select USB_LIBCOMPOSITE
+ select USB_U_ETHER
+ select USB_U_RNDIS
+ select USB_F_ECM
+ select USB_F_SUBSET
select CRC32
help
This driver implements Ethernet style communication, in one of
@@ -639,6 +784,7 @@ config USB_ETH_RNDIS
bool "RNDIS support"
depends on USB_ETH
select USB_LIBCOMPOSITE
+ select USB_F_RNDIS
default y
help
Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
@@ -658,6 +804,7 @@ config USB_ETH_EEM
bool "Ethernet Emulation Model (EEM) support"
depends on USB_ETH
select USB_LIBCOMPOSITE
+ select USB_F_EEM
default n
help
CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
@@ -675,6 +822,8 @@ config USB_G_NCM
tristate "Network Control Model (NCM) support"
depends on NET
select USB_LIBCOMPOSITE
+ select USB_U_ETHER
+ select USB_F_NCM
select CRC32
help
This driver implements USB CDC NCM subclass standard. NCM is
@@ -718,6 +867,7 @@ config USB_FUNCTIONFS
config USB_FUNCTIONFS_ETH
bool "Include configuration with CDC ECM (Ethernet)"
depends on USB_FUNCTIONFS && NET
+ select USB_U_ETHER
help
Include a configuration with CDC ECM function (Ethernet) and the
Function Filesystem.
@@ -725,6 +875,8 @@ config USB_FUNCTIONFS_ETH
config USB_FUNCTIONFS_RNDIS
bool "Include configuration with RNDIS (Ethernet)"
depends on USB_FUNCTIONFS && NET
+ select USB_U_ETHER
+ select USB_U_RNDIS
help
Include a configuration with RNDIS function (Ethernet) and the Filesystem.
@@ -825,7 +977,9 @@ config USB_CDC_COMPOSITE
depends on NET
select USB_LIBCOMPOSITE
select USB_U_SERIAL
+ select USB_U_ETHER
select USB_F_ACM
+ select USB_F_ECM
help
This driver provides two functions in one configuration:
a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
@@ -842,7 +996,11 @@ config USB_G_NOKIA
depends on PHONET
select USB_LIBCOMPOSITE
select USB_U_SERIAL
+ select USB_U_ETHER
select USB_F_ACM
+ select USB_F_OBEX
+ select USB_F_PHONET
+ select USB_F_ECM
help
The Nokia composite gadget provides support for acm, obex
and phonet in only one composite gadget driver.
@@ -869,6 +1027,8 @@ config USB_G_MULTI
select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
select USB_LIBCOMPOSITE
select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_U_RNDIS
select USB_F_ACM
help
The Multifunction Composite Gadget provides Ethernet (RNDIS
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 6afd16659e7..bad08e66f36 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_USB_EG20T) += pch_udc.o
obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
mv_udc-y := mv_udc_core.o
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
+obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o
obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
# USB Functions
@@ -45,6 +46,21 @@ usb_f_serial-y := f_serial.o
obj-$(CONFIG_USB_F_SERIAL) += usb_f_serial.o
usb_f_obex-y := f_obex.o
obj-$(CONFIG_USB_F_OBEX) += usb_f_obex.o
+obj-$(CONFIG_USB_U_ETHER) += u_ether.o
+u_rndis-y := rndis.o
+obj-$(CONFIG_USB_U_RNDIS) += u_rndis.o
+usb_f_ncm-y := f_ncm.o
+obj-$(CONFIG_USB_F_NCM) += usb_f_ncm.o
+usb_f_ecm-y := f_ecm.o
+obj-$(CONFIG_USB_F_ECM) += usb_f_ecm.o
+usb_f_phonet-y := f_phonet.o
+obj-$(CONFIG_USB_F_PHONET) += usb_f_phonet.o
+usb_f_eem-y := f_eem.o
+obj-$(CONFIG_USB_F_EEM) += usb_f_eem.o
+usb_f_ecm_subset-y := f_subset.o
+obj-$(CONFIG_USB_F_SUBSET) += usb_f_ecm_subset.o
+usb_f_rndis-y := f_rndis.o
+obj-$(CONFIG_USB_F_RNDIS) += usb_f_rndis.o
#
# USB gadget drivers
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 2c525518276..5a5acf22c69 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -15,6 +15,7 @@
#include "u_ether.h"
#include "u_serial.h"
+#include "u_ecm.h"
#define DRIVER_DESC "CDC Composite Gadget"
@@ -32,18 +33,9 @@
#define CDC_VENDOR_NUM 0x0525 /* NetChip */
#define CDC_PRODUCT_NUM 0xa4aa /* CDC Composite: ECM + ACM */
-/*-------------------------------------------------------------------------*/
USB_GADGET_COMPOSITE_OPTIONS();
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module. So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_ecm.c"
-#include "u_ether.c"
+USB_ETHERNET_MODULE_PARAMETERS();
/*-------------------------------------------------------------------------*/
@@ -102,12 +94,13 @@ static struct usb_gadget_strings *dev_strings[] = {
NULL,
};
-static u8 hostaddr[ETH_ALEN];
-static struct eth_dev *the_dev;
/*-------------------------------------------------------------------------*/
static struct usb_function *f_acm;
static struct usb_function_instance *fi_serial;
+static struct usb_function *f_ecm;
+static struct usb_function_instance *fi_ecm;
+
/*
* We _always_ have both CDC ECM and CDC ACM functions.
*/
@@ -120,13 +113,27 @@ static int __init cdc_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- status = ecm_bind_config(c, hostaddr, the_dev);
- if (status < 0)
- return status;
+ fi_ecm = usb_get_function_instance("ecm");
+ if (IS_ERR(fi_ecm)) {
+ status = PTR_ERR(fi_ecm);
+ goto err_func_ecm;
+ }
+
+ f_ecm = usb_get_function(fi_ecm);
+ if (IS_ERR(f_ecm)) {
+ status = PTR_ERR(f_ecm);
+ goto err_get_ecm;
+ }
+
+ status = usb_add_function(c, f_ecm);
+ if (status)
+ goto err_add_ecm;
fi_serial = usb_get_function_instance("acm");
- if (IS_ERR(fi_serial))
- return PTR_ERR(fi_serial);
+ if (IS_ERR(fi_serial)) {
+ status = PTR_ERR(fi_serial);
+ goto err_get_acm;
+ }
f_acm = usb_get_function(fi_serial);
if (IS_ERR(f_acm)) {
@@ -136,12 +143,21 @@ static int __init cdc_do_config(struct usb_configuration *c)
status = usb_add_function(c, f_acm);
if (status)
- goto err_conf;
+ goto err_add_acm;
+
return 0;
-err_conf:
+
+err_add_acm:
usb_put_function(f_acm);
err_func_acm:
usb_put_function_instance(fi_serial);
+err_get_acm:
+ usb_remove_function(c, f_ecm);
+err_add_ecm:
+ usb_put_function(f_ecm);
+err_get_ecm:
+ usb_put_function_instance(fi_ecm);
+err_func_ecm:
return status;
}
@@ -157,6 +173,7 @@ static struct usb_configuration cdc_config_driver = {
static int __init cdc_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
+ struct f_ecm_opts *ecm_opts;
int status;
if (!can_support_ecm(cdev->gadget)) {
@@ -165,10 +182,23 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
return -EINVAL;
}
- /* set up network link layer */
- the_dev = gether_setup(cdev->gadget, hostaddr);
- if (IS_ERR(the_dev))
- return PTR_ERR(the_dev);
+ fi_ecm = usb_get_function_instance("ecm");
+ if (IS_ERR(fi_ecm))
+ return PTR_ERR(fi_ecm);
+
+ ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+ gether_set_qmult(ecm_opts->net, qmult);
+ if (!gether_set_host_addr(ecm_opts->net, host_addr))
+ pr_info("using host ethernet address: %s", host_addr);
+ if (!gether_set_dev_addr(ecm_opts->net, dev_addr))
+ pr_info("using self ethernet address: %s", dev_addr);
+
+ fi_serial = usb_get_function_instance("acm");
+ if (IS_ERR(fi_serial)) {
+ status = PTR_ERR(fi_serial);
+ goto fail;
+ }
/* Allocate string descriptor numbers ... note that string
* contents can be overridden by the composite_dev glue.
@@ -192,7 +222,9 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
return 0;
fail1:
- gether_cleanup(the_dev);
+ usb_put_function_instance(fi_serial);
+fail:
+ usb_put_function_instance(fi_ecm);
return status;
}
@@ -200,7 +232,10 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev)
{
usb_put_function(f_acm);
usb_put_function_instance(fi_serial);
- gether_cleanup(the_dev);
+ if (!IS_ERR_OR_NULL(f_ecm))
+ usb_put_function(f_ecm);
+ if (!IS_ERR_OR_NULL(fi_ecm))
+ usb_put_function_instance(fi_ecm);
return 0;
}
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 56c8ecae9bc..f48712ffe26 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -14,6 +14,7 @@
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
+#include <linux/netdevice.h>
#if defined USB_ETH_RNDIS
# undef USB_ETH_RNDIS
@@ -91,27 +92,23 @@ static inline bool has_rndis(void)
#endif
}
-/*-------------------------------------------------------------------------*/
+#include <linux/module.h>
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module. So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_ecm.c"
-#include "f_subset.c"
+#include "u_ecm.h"
+#include "u_gether.h"
#ifdef USB_ETH_RNDIS
-#include "f_rndis.c"
-#include "rndis.c"
+#include "u_rndis.h"
+#include "rndis.h"
+#else
+#define rndis_borrow_net(...) do {} while (0)
#endif
-#include "f_eem.c"
-#include "u_ether.c"
+#include "u_eem.h"
/*-------------------------------------------------------------------------*/
USB_GADGET_COMPOSITE_OPTIONS();
+USB_ETHERNET_MODULE_PARAMETERS();
+
/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
* Instead: allocate your own, using normal USB-IF procedures.
*/
@@ -206,8 +203,18 @@ static struct usb_gadget_strings *dev_strings[] = {
NULL,
};
-static u8 hostaddr[ETH_ALEN];
-static struct eth_dev *the_dev;
+static struct usb_function_instance *fi_ecm;
+static struct usb_function *f_ecm;
+
+static struct usb_function_instance *fi_eem;
+static struct usb_function *f_eem;
+
+static struct usb_function_instance *fi_geth;
+static struct usb_function *f_geth;
+
+static struct usb_function_instance *fi_rndis;
+static struct usb_function *f_rndis;
+
/*-------------------------------------------------------------------------*/
/*
@@ -217,6 +224,8 @@ static struct eth_dev *the_dev;
*/
static int __init rndis_do_config(struct usb_configuration *c)
{
+ int status;
+
/* FIXME alloc iConfiguration string, set it in c->strings */
if (gadget_is_otg(c->cdev->gadget)) {
@@ -224,7 +233,15 @@ static int __init rndis_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- return rndis_bind_config(c, hostaddr, the_dev);
+ f_rndis = usb_get_function(fi_rndis);
+ if (IS_ERR(f_rndis))
+ return PTR_ERR(f_rndis);
+
+ status = usb_add_function(c, f_rndis);
+ if (status < 0)
+ usb_put_function(f_rndis);
+
+ return status;
}
static struct usb_configuration rndis_config_driver = {
@@ -249,6 +266,8 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
*/
static int __init eth_do_config(struct usb_configuration *c)
{
+ int status = 0;
+
/* FIXME alloc iConfiguration string, set it in c->strings */
if (gadget_is_otg(c->cdev->gadget)) {
@@ -256,12 +275,38 @@ static int __init eth_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- if (use_eem)
- return eem_bind_config(c, the_dev);
- else if (can_support_ecm(c->cdev->gadget))
- return ecm_bind_config(c, hostaddr, the_dev);
- else
- return geth_bind_config(c, hostaddr, the_dev);
+ if (use_eem) {
+ f_eem = usb_get_function(fi_eem);
+ if (IS_ERR(f_eem))
+ return PTR_ERR(f_eem);
+
+ status = usb_add_function(c, f_eem);
+ if (status < 0)
+ usb_put_function(f_eem);
+
+ return status;
+ } else if (can_support_ecm(c->cdev->gadget)) {
+ f_ecm = usb_get_function(fi_ecm);
+ if (IS_ERR(f_ecm))
+ return PTR_ERR(f_ecm);
+
+ status = usb_add_function(c, f_ecm);
+ if (status < 0)
+ usb_put_function(f_ecm);
+
+ return status;
+ } else {
+ f_geth = usb_get_function(fi_geth);
+ if (IS_ERR(f_geth))
+ return PTR_ERR(f_geth);
+
+ status = usb_add_function(c, f_geth);
+ if (status < 0)
+ usb_put_function(f_geth);
+
+ return status;
+ }
+
}
static struct usb_configuration eth_config_driver = {
@@ -276,24 +321,50 @@ static struct usb_configuration eth_config_driver = {
static int __init eth_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
+ struct f_eem_opts *eem_opts = NULL;
+ struct f_ecm_opts *ecm_opts = NULL;
+ struct f_gether_opts *geth_opts = NULL;
+ struct net_device *net;
int status;
- /* set up network link layer */
- the_dev = gether_setup(cdev->gadget, hostaddr);
- if (IS_ERR(the_dev))
- return PTR_ERR(the_dev);
-
/* set up main config label and device descriptor */
if (use_eem) {
/* EEM */
+ fi_eem = usb_get_function_instance("eem");
+ if (IS_ERR(fi_eem))
+ return PTR_ERR(fi_eem);
+
+ eem_opts = container_of(fi_eem, struct f_eem_opts, func_inst);
+
+ net = eem_opts->net;
+
eth_config_driver.label = "CDC Ethernet (EEM)";
device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
- } else if (can_support_ecm(cdev->gadget)) {
+ } else if (can_support_ecm(gadget)) {
/* ECM */
+
+ fi_ecm = usb_get_function_instance("ecm");
+ if (IS_ERR(fi_ecm))
+ return PTR_ERR(fi_ecm);
+
+ ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+ net = ecm_opts->net;
+
eth_config_driver.label = "CDC Ethernet (ECM)";
} else {
/* CDC Subset */
+
+ fi_geth = usb_get_function_instance("geth");
+ if (IS_ERR(fi_geth))
+ return PTR_ERR(fi_geth);
+
+ geth_opts = container_of(fi_geth, struct f_gether_opts,
+ func_inst);
+
+ net = geth_opts->net;
+
eth_config_driver.label = "CDC Subset/SAFE";
device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
@@ -302,8 +373,34 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
+ gether_set_qmult(net, qmult);
+ if (!gether_set_host_addr(net, host_addr))
+ pr_info("using host ethernet address: %s", host_addr);
+ if (!gether_set_dev_addr(net, dev_addr))
+ pr_info("using self ethernet address: %s", dev_addr);
+
if (has_rndis()) {
/* RNDIS plus ECM-or-Subset */
+ gether_set_gadget(net, cdev->gadget);
+ status = gether_register_netdev(net);
+ if (status)
+ goto fail;
+
+ if (use_eem)
+ eem_opts->bound = true;
+ else if (can_support_ecm(gadget))
+ ecm_opts->bound = true;
+ else
+ geth_opts->bound = true;
+
+ fi_rndis = usb_get_function_instance("rndis");
+ if (IS_ERR(fi_rndis)) {
+ status = PTR_ERR(fi_rndis);
+ goto fail;
+ }
+
+ rndis_borrow_net(fi_rndis, net);
+
device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
device_desc.bNumConfigurations = 2;
@@ -315,7 +412,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
status = usb_string_ids_tab(cdev, strings_dev);
if (status < 0)
- goto fail;
+ goto fail1;
device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
@@ -324,12 +421,12 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
status = usb_add_config(cdev, &rndis_config_driver,
rndis_do_config);
if (status < 0)
- goto fail;
+ goto fail1;
}
status = usb_add_config(cdev, &eth_config_driver, eth_do_config);
if (status < 0)
- goto fail;
+ goto fail1;
usb_composite_overwrite_options(cdev, &coverwrite);
dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
@@ -337,14 +434,29 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
return 0;
+fail1:
+ if (has_rndis())
+ usb_put_function_instance(fi_rndis);
fail:
- gether_cleanup(the_dev);
+ if (use_eem)
+ usb_put_function_instance(fi_eem);
+ else if (can_support_ecm(gadget))
+ usb_put_function_instance(fi_ecm);
+ else
+ usb_put_function_instance(fi_geth);
return status;
}
static int __exit eth_unbind(struct usb_composite_dev *cdev)
{
- gether_cleanup(the_dev);
+ if (has_rndis())
+ usb_put_function_instance(fi_rndis);
+ if (use_eem)
+ usb_put_function_instance(fi_eem);
+ else if (can_support_ecm(cdev->gadget))
+ usb_put_function_instance(fi_ecm);
+ else
+ usb_put_function_instance(fi_geth);
return 0;
}
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index abf8a31ae14..5d3561ea1c1 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -14,10 +14,13 @@
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_ecm.h"
/*
@@ -684,9 +687,44 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_ecm *ecm = func_to_ecm(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+#ifndef USBF_ECM_INCLUDED
+ struct f_ecm_opts *ecm_opts;
+
+ if (!can_support_ecm(cdev->gadget))
+ return -EINVAL;
+
+ ecm_opts = container_of(f->fi, struct f_ecm_opts, func_inst);
+
+ /*
+ * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+ * configurations are bound in sequence with list_for_each_entry,
+ * in each configuration its functions are bound in sequence
+ * with list_for_each_entry, so we assume no race condition
+ * with regard to ecm_opts->bound access
+ */
+ if (!ecm_opts->bound) {
+ mutex_lock(&ecm_opts->lock);
+ gether_set_gadget(ecm_opts->net, cdev->gadget);
+ status = gether_register_netdev(ecm_opts->net);
+ mutex_unlock(&ecm_opts->lock);
+ if (status)
+ return status;
+ ecm_opts->bound = true;
+ }
+#endif
+ us = usb_gstrings_attach(cdev, ecm_strings,
+ ARRAY_SIZE(ecm_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ ecm_control_intf.iInterface = us[0].id;
+ ecm_data_intf.iInterface = us[2].id;
+ ecm_desc.iMACAddress = us[1].id;
+ ecm_iad_descriptor.iFunction = us[3].id;
+
/* allocate instance-specific interface IDs */
status = usb_interface_id(c, f);
if (status < 0)
@@ -796,14 +834,15 @@ fail:
return status;
}
+#ifdef USBF_ECM_INCLUDED
+
static void
-ecm_unbind(struct usb_configuration *c, struct usb_function *f)
+ecm_old_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_ecm *ecm = func_to_ecm(f);
DBG(c->cdev, "ecm unbind\n");
- ecm_string_defs[0].id = 0;
usb_free_all_descriptors(f);
kfree(ecm->notify_req->buf);
@@ -834,17 +873,6 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
return -EINVAL;
- if (ecm_string_defs[0].id == 0) {
- status = usb_string_ids_tab(c->cdev, ecm_string_defs);
- if (status)
- return status;
-
- ecm_control_intf.iInterface = ecm_string_defs[0].id;
- ecm_data_intf.iInterface = ecm_string_defs[2].id;
- ecm_desc.iMACAddress = ecm_string_defs[1].id;
- ecm_iad_descriptor.iFunction = ecm_string_defs[3].id;
- }
-
/* allocate and initialize one new instance */
ecm = kzalloc(sizeof *ecm, GFP_KERNEL);
if (!ecm)
@@ -858,10 +886,9 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
ecm->port.cdc_filter = DEFAULT_FILTER;
ecm->port.func.name = "cdc_ethernet";
- ecm->port.func.strings = ecm_strings;
/* descriptors are per-instance copies */
ecm->port.func.bind = ecm_bind;
- ecm->port.func.unbind = ecm_unbind;
+ ecm->port.func.unbind = ecm_old_unbind;
ecm->port.func.set_alt = ecm_set_alt;
ecm->port.func.get_alt = ecm_get_alt;
ecm->port.func.setup = ecm_setup;
@@ -872,3 +899,143 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
kfree(ecm);
return status;
}
+
+#else
+
+static inline struct f_ecm_opts *to_f_ecm_opts(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct f_ecm_opts,
+ func_inst.group);
+}
+
+/* f_ecm_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(ecm);
+
+/* f_ecm_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(ecm);
+
+/* f_ecm_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(ecm);
+
+/* f_ecm_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(ecm);
+
+/* f_ecm_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(ecm);
+
+static struct configfs_attribute *ecm_attrs[] = {
+ &f_ecm_opts_dev_addr.attr,
+ &f_ecm_opts_host_addr.attr,
+ &f_ecm_opts_qmult.attr,
+ &f_ecm_opts_ifname.attr,
+ NULL,
+};
+
+static struct config_item_type ecm_func_type = {
+ .ct_item_ops = &ecm_item_ops,
+ .ct_attrs = ecm_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void ecm_free_inst(struct usb_function_instance *f)
+{
+ struct f_ecm_opts *opts;
+
+ opts = container_of(f, struct f_ecm_opts, func_inst);
+ if (opts->bound)
+ gether_cleanup(netdev_priv(opts->net));
+ else
+ free_netdev(opts->net);
+ kfree(opts);
+}
+
+static struct usb_function_instance *ecm_alloc_inst(void)
+{
+ struct f_ecm_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ mutex_init(&opts->lock);
+ opts->func_inst.free_func_inst = ecm_free_inst;
+ opts->net = gether_setup_default();
+ if (IS_ERR(opts->net))
+ return ERR_PTR(PTR_ERR(opts->net));
+
+ config_group_init_type_name(&opts->func_inst.group, "", &ecm_func_type);
+
+ return &opts->func_inst;
+}
+
+static void ecm_free(struct usb_function *f)
+{
+ struct f_ecm *ecm;
+ struct f_ecm_opts *opts;
+
+ ecm = func_to_ecm(f);
+ opts = container_of(f->fi, struct f_ecm_opts, func_inst);
+ kfree(ecm);
+ mutex_lock(&opts->lock);
+ opts->refcnt--;
+ mutex_unlock(&opts->lock);
+}
+
+static void ecm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_ecm *ecm = func_to_ecm(f);
+
+ DBG(c->cdev, "ecm unbind\n");
+
+ usb_free_all_descriptors(f);
+
+ kfree(ecm->notify_req->buf);
+ usb_ep_free_request(ecm->notify, ecm->notify_req);
+}
+
+struct usb_function *ecm_alloc(struct usb_function_instance *fi)
+{
+ struct f_ecm *ecm;
+ struct f_ecm_opts *opts;
+ int status;
+
+ /* allocate and initialize one new instance */
+ ecm = kzalloc(sizeof(*ecm), GFP_KERNEL);
+ if (!ecm)
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_ecm_opts, func_inst);
+ mutex_lock(&opts->lock);
+ opts->refcnt++;
+
+ /* export host's Ethernet address in CDC format */
+ status = gether_get_host_addr_cdc(opts->net, ecm->ethaddr,
+ sizeof(ecm->ethaddr));
+ if (status < 12) {
+ kfree(ecm);
+ mutex_unlock(&opts->lock);
+ return ERR_PTR(-EINVAL);
+ }
+ ecm_string_defs[1].s = ecm->ethaddr;
+
+ ecm->port.ioport = netdev_priv(opts->net);
+ mutex_unlock(&opts->lock);
+ ecm->port.cdc_filter = DEFAULT_FILTER;
+
+ ecm->port.func.name = "cdc_ethernet";
+ /* descriptors are per-instance copies */
+ ecm->port.func.bind = ecm_bind;
+ ecm->port.func.unbind = ecm_unbind;
+ ecm->port.func.set_alt = ecm_set_alt;
+ ecm->port.func.get_alt = ecm_get_alt;
+ ecm->port.func.setup = ecm_setup;
+ ecm->port.func.disable = ecm_disable;
+ ecm->port.func.free_func = ecm_free;
+
+ return &ecm->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(ecm, ecm_alloc_inst, ecm_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
+
+#endif
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index f4e0bbef602..90ee8022e8d 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -12,12 +12,15 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/crc32.h>
#include <linux/slab.h>
#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_eem.h"
#define EEM_HLEN 2
@@ -40,7 +43,7 @@ static inline struct f_eem *func_to_eem(struct usb_function *f)
/* interface descriptor: */
-static struct usb_interface_descriptor eem_intf __initdata = {
+static struct usb_interface_descriptor eem_intf = {
.bLength = sizeof eem_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -54,7 +57,7 @@ static struct usb_interface_descriptor eem_intf __initdata = {
/* full speed support: */
-static struct usb_endpoint_descriptor eem_fs_in_desc __initdata = {
+static struct usb_endpoint_descriptor eem_fs_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -62,7 +65,7 @@ static struct usb_endpoint_descriptor eem_fs_in_desc __initdata = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static struct usb_endpoint_descriptor eem_fs_out_desc __initdata = {
+static struct usb_endpoint_descriptor eem_fs_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -70,7 +73,7 @@ static struct usb_endpoint_descriptor eem_fs_out_desc __initdata = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static struct usb_descriptor_header *eem_fs_function[] __initdata = {
+static struct usb_descriptor_header *eem_fs_function[] = {
/* CDC EEM control descriptors */
(struct usb_descriptor_header *) &eem_intf,
(struct usb_descriptor_header *) &eem_fs_in_desc,
@@ -80,7 +83,7 @@ static struct usb_descriptor_header *eem_fs_function[] __initdata = {
/* high speed support: */
-static struct usb_endpoint_descriptor eem_hs_in_desc __initdata = {
+static struct usb_endpoint_descriptor eem_hs_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -89,7 +92,7 @@ static struct usb_endpoint_descriptor eem_hs_in_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(512),
};
-static struct usb_endpoint_descriptor eem_hs_out_desc __initdata = {
+static struct usb_endpoint_descriptor eem_hs_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -98,7 +101,7 @@ static struct usb_endpoint_descriptor eem_hs_out_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(512),
};
-static struct usb_descriptor_header *eem_hs_function[] __initdata = {
+static struct usb_descriptor_header *eem_hs_function[] = {
/* CDC EEM control descriptors */
(struct usb_descriptor_header *) &eem_intf,
(struct usb_descriptor_header *) &eem_hs_in_desc,
@@ -108,7 +111,7 @@ static struct usb_descriptor_header *eem_hs_function[] __initdata = {
/* super speed support: */
-static struct usb_endpoint_descriptor eem_ss_in_desc __initdata = {
+static struct usb_endpoint_descriptor eem_ss_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -117,7 +120,7 @@ static struct usb_endpoint_descriptor eem_ss_in_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(1024),
};
-static struct usb_endpoint_descriptor eem_ss_out_desc __initdata = {
+static struct usb_endpoint_descriptor eem_ss_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -126,7 +129,7 @@ static struct usb_endpoint_descriptor eem_ss_out_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(1024),
};
-static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc __initdata = {
+static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc = {
.bLength = sizeof eem_ss_bulk_comp_desc,
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
@@ -135,7 +138,7 @@ static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc __initdata = {
/* .bmAttributes = 0, */
};
-static struct usb_descriptor_header *eem_ss_function[] __initdata = {
+static struct usb_descriptor_header *eem_ss_function[] = {
/* CDC EEM control descriptors */
(struct usb_descriptor_header *) &eem_intf,
(struct usb_descriptor_header *) &eem_ss_in_desc,
@@ -242,14 +245,40 @@ static void eem_disable(struct usb_function *f)
/* EEM function driver setup/binding */
-static int __init
-eem_bind(struct usb_configuration *c, struct usb_function *f)
+static int eem_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_eem *eem = func_to_eem(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+ struct f_eem_opts *eem_opts;
+
+ eem_opts = container_of(f->fi, struct f_eem_opts, func_inst);
+ /*
+ * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+ * configurations are bound in sequence with list_for_each_entry,
+ * in each configuration its functions are bound in sequence
+ * with list_for_each_entry, so we assume no race condition
+ * with regard to eem_opts->bound access
+ */
+ if (!eem_opts->bound) {
+ mutex_lock(&eem_opts->lock);
+ gether_set_gadget(eem_opts->net, cdev->gadget);
+ status = gether_register_netdev(eem_opts->net);
+ mutex_unlock(&eem_opts->lock);
+ if (status)
+ return status;
+ eem_opts->bound = true;
+ }
+
+ us = usb_gstrings_attach(cdev, eem_strings,
+ ARRAY_SIZE(eem_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ eem_intf.iInterface = us[0].id;
+
/* allocate instance-specific interface IDs */
status = usb_interface_id(c, f);
if (status < 0)
@@ -307,17 +336,6 @@ fail:
return status;
}
-static void
-eem_unbind(struct usb_configuration *c, struct usb_function *f)
-{
- struct f_eem *eem = func_to_eem(f);
-
- DBG(c->cdev, "eem unbind\n");
-
- usb_free_all_descriptors(f);
- kfree(eem);
-}
-
static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
{
struct sk_buff *skb = (struct sk_buff *)req->context;
@@ -518,55 +536,124 @@ error:
return status;
}
-/**
- * eem_bind_config - add CDC Ethernet (EEM) network link to a configuration
- * @c: the configuration to support the network link
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gether_setup(). Caller is also responsible
- * for calling @gether_cleanup() before module unload.
- */
-int __init eem_bind_config(struct usb_configuration *c, struct eth_dev *dev)
+static inline struct f_eem_opts *to_f_eem_opts(struct config_item *item)
{
- struct f_eem *eem;
- int status;
+ return container_of(to_config_group(item), struct f_eem_opts,
+ func_inst.group);
+}
- /* maybe allocate device-global string IDs */
- if (eem_string_defs[0].id == 0) {
+/* f_eem_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(eem);
- /* control interface label */
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- eem_string_defs[0].id = status;
- eem_intf.iInterface = status;
- }
+/* f_eem_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(eem);
+
+/* f_eem_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(eem);
+
+/* f_eem_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(eem);
+
+/* f_eem_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(eem);
+
+static struct configfs_attribute *eem_attrs[] = {
+ &f_eem_opts_dev_addr.attr,
+ &f_eem_opts_host_addr.attr,
+ &f_eem_opts_qmult.attr,
+ &f_eem_opts_ifname.attr,
+ NULL,
+};
+
+static struct config_item_type eem_func_type = {
+ .ct_item_ops = &eem_item_ops,
+ .ct_attrs = eem_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void eem_free_inst(struct usb_function_instance *f)
+{
+ struct f_eem_opts *opts;
+
+ opts = container_of(f, struct f_eem_opts, func_inst);
+ if (opts->bound)
+ gether_cleanup(netdev_priv(opts->net));
+ else
+ free_netdev(opts->net);
+ kfree(opts);
+}
+
+static struct usb_function_instance *eem_alloc_inst(void)
+{
+ struct f_eem_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ mutex_init(&opts->lock);
+ opts->func_inst.free_func_inst = eem_free_inst;
+ opts->net = gether_setup_default();
+ if (IS_ERR(opts->net))
+ return ERR_CAST(opts->net);
+
+ config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type);
+
+ return &opts->func_inst;
+}
+
+static void eem_free(struct usb_function *f)
+{
+ struct f_eem *eem;
+ struct f_eem_opts *opts;
+
+ eem = func_to_eem(f);
+ opts = container_of(f->fi, struct f_eem_opts, func_inst);
+ kfree(eem);
+ mutex_lock(&opts->lock);
+ opts->refcnt--;
+ mutex_unlock(&opts->lock);
+}
+
+static void eem_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ DBG(c->cdev, "eem unbind\n");
+
+ usb_free_all_descriptors(f);
+}
+
+struct usb_function *eem_alloc(struct usb_function_instance *fi)
+{
+ struct f_eem *eem;
+ struct f_eem_opts *opts;
/* allocate and initialize one new instance */
- eem = kzalloc(sizeof *eem, GFP_KERNEL);
+ eem = kzalloc(sizeof(*eem), GFP_KERNEL);
if (!eem)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
- eem->port.ioport = dev;
+ opts = container_of(fi, struct f_eem_opts, func_inst);
+ mutex_lock(&opts->lock);
+ opts->refcnt++;
+
+ eem->port.ioport = netdev_priv(opts->net);
+ mutex_unlock(&opts->lock);
eem->port.cdc_filter = DEFAULT_FILTER;
eem->port.func.name = "cdc_eem";
- eem->port.func.strings = eem_strings;
/* descriptors are per-instance copies */
eem->port.func.bind = eem_bind;
eem->port.func.unbind = eem_unbind;
eem->port.func.set_alt = eem_set_alt;
eem->port.func.setup = eem_setup;
eem->port.func.disable = eem_disable;
+ eem->port.func.free_func = eem_free;
eem->port.wrap = eem_wrap;
eem->port.unwrap = eem_unwrap;
eem->port.header_len = EEM_HLEN;
- status = usb_add_function(c, &eem->port.func);
- if (status)
- kfree(eem);
- return status;
+ return &eem->port.func;
}
+DECLARE_USB_FUNCTION_INIT(eem, eem_alloc_inst, eem_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 97666e8b1b9..56f1fd1cba2 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -413,6 +413,7 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
/* Caller must hold fsg->lock */
static void wakeup_thread(struct fsg_common *common)
{
+ smp_wmb(); /* ensure the write of bh->state is complete */
/* Tell the main thread that something has happened */
common->thread_wakeup_needed = 1;
if (common->thread_task)
@@ -632,6 +633,7 @@ static int sleep_thread(struct fsg_common *common)
}
__set_current_state(TASK_RUNNING);
common->thread_wakeup_needed = 0;
+ smp_rmb(); /* ensure the latest bh->state is visible */
return rc;
}
@@ -2745,8 +2747,8 @@ buffhds_first_it:
"%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
/* Assume product name dependent on the first LUN */
cfg->product_name ?: (common->luns->cdrom
- ? "File-Stor Gadget"
- : "File-CD Gadget"),
+ ? "File-CD Gadget"
+ : "File-Stor Gadget"),
i);
/*
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index ee19bc8d004..952177f7eb9 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -16,6 +16,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/crc32.h>
@@ -23,6 +24,8 @@
#include <linux/usb/cdc.h>
#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_ncm.h"
/*
* This function is a "CDC Network Control Model" (CDC NCM) Ethernet link.
@@ -125,7 +128,7 @@ static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
#define NCM_STATUS_INTERVAL_MS 32
#define NCM_STATUS_BYTECOUNT 16 /* 8 byte header + data */
-static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = {
+static struct usb_interface_assoc_descriptor ncm_iad_desc = {
.bLength = sizeof ncm_iad_desc,
.bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
@@ -139,7 +142,7 @@ static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = {
/* interface descriptor: */
-static struct usb_interface_descriptor ncm_control_intf __initdata = {
+static struct usb_interface_descriptor ncm_control_intf = {
.bLength = sizeof ncm_control_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -151,7 +154,7 @@ static struct usb_interface_descriptor ncm_control_intf __initdata = {
/* .iInterface = DYNAMIC */
};
-static struct usb_cdc_header_desc ncm_header_desc __initdata = {
+static struct usb_cdc_header_desc ncm_header_desc = {
.bLength = sizeof ncm_header_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_HEADER_TYPE,
@@ -159,7 +162,7 @@ static struct usb_cdc_header_desc ncm_header_desc __initdata = {
.bcdCDC = cpu_to_le16(0x0110),
};
-static struct usb_cdc_union_desc ncm_union_desc __initdata = {
+static struct usb_cdc_union_desc ncm_union_desc = {
.bLength = sizeof(ncm_union_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_UNION_TYPE,
@@ -167,7 +170,7 @@ static struct usb_cdc_union_desc ncm_union_desc __initdata = {
/* .bSlaveInterface0 = DYNAMIC */
};
-static struct usb_cdc_ether_desc ecm_desc __initdata = {
+static struct usb_cdc_ether_desc ecm_desc = {
.bLength = sizeof ecm_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
@@ -182,7 +185,7 @@ static struct usb_cdc_ether_desc ecm_desc __initdata = {
#define NCAPS (USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE)
-static struct usb_cdc_ncm_desc ncm_desc __initdata = {
+static struct usb_cdc_ncm_desc ncm_desc = {
.bLength = sizeof ncm_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_NCM_TYPE,
@@ -194,7 +197,7 @@ static struct usb_cdc_ncm_desc ncm_desc __initdata = {
/* the default data interface has no endpoints ... */
-static struct usb_interface_descriptor ncm_data_nop_intf __initdata = {
+static struct usb_interface_descriptor ncm_data_nop_intf = {
.bLength = sizeof ncm_data_nop_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -209,7 +212,7 @@ static struct usb_interface_descriptor ncm_data_nop_intf __initdata = {
/* ... but the "real" data interface has two bulk endpoints */
-static struct usb_interface_descriptor ncm_data_intf __initdata = {
+static struct usb_interface_descriptor ncm_data_intf = {
.bLength = sizeof ncm_data_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -224,7 +227,7 @@ static struct usb_interface_descriptor ncm_data_intf __initdata = {
/* full speed support: */
-static struct usb_endpoint_descriptor fs_ncm_notify_desc __initdata = {
+static struct usb_endpoint_descriptor fs_ncm_notify_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -234,7 +237,7 @@ static struct usb_endpoint_descriptor fs_ncm_notify_desc __initdata = {
.bInterval = NCM_STATUS_INTERVAL_MS,
};
-static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = {
+static struct usb_endpoint_descriptor fs_ncm_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -242,7 +245,7 @@ static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static struct usb_endpoint_descriptor fs_ncm_out_desc __initdata = {
+static struct usb_endpoint_descriptor fs_ncm_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -250,7 +253,7 @@ static struct usb_endpoint_descriptor fs_ncm_out_desc __initdata = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static struct usb_descriptor_header *ncm_fs_function[] __initdata = {
+static struct usb_descriptor_header *ncm_fs_function[] = {
(struct usb_descriptor_header *) &ncm_iad_desc,
/* CDC NCM control descriptors */
(struct usb_descriptor_header *) &ncm_control_intf,
@@ -269,7 +272,7 @@ static struct usb_descriptor_header *ncm_fs_function[] __initdata = {
/* high speed support: */
-static struct usb_endpoint_descriptor hs_ncm_notify_desc __initdata = {
+static struct usb_endpoint_descriptor hs_ncm_notify_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -278,7 +281,7 @@ static struct usb_endpoint_descriptor hs_ncm_notify_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT),
.bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS),
};
-static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = {
+static struct usb_endpoint_descriptor hs_ncm_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -287,7 +290,7 @@ static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(512),
};
-static struct usb_endpoint_descriptor hs_ncm_out_desc __initdata = {
+static struct usb_endpoint_descriptor hs_ncm_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -296,7 +299,7 @@ static struct usb_endpoint_descriptor hs_ncm_out_desc __initdata = {
.wMaxPacketSize = cpu_to_le16(512),
};
-static struct usb_descriptor_header *ncm_hs_function[] __initdata = {
+static struct usb_descriptor_header *ncm_hs_function[] = {
(struct usb_descriptor_header *) &ncm_iad_desc,
/* CDC NCM control descriptors */
(struct usb_descriptor_header *) &ncm_control_intf,
@@ -1152,13 +1155,44 @@ static void ncm_close(struct gether *geth)
/* ethernet function driver setup/binding */
-static int __init
-ncm_bind(struct usb_configuration *c, struct usb_function *f)
+static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_ncm *ncm = func_to_ncm(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+ struct f_ncm_opts *ncm_opts;
+
+ if (!can_support_ecm(cdev->gadget))
+ return -EINVAL;
+
+ ncm_opts = container_of(f->fi, struct f_ncm_opts, func_inst);
+ /*
+ * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+ * configurations are bound in sequence with list_for_each_entry,
+ * in each configuration its functions are bound in sequence
+ * with list_for_each_entry, so we assume no race condition
+ * with regard to ncm_opts->bound access
+ */
+ if (!ncm_opts->bound) {
+ mutex_lock(&ncm_opts->lock);
+ gether_set_gadget(ncm_opts->net, cdev->gadget);
+ status = gether_register_netdev(ncm_opts->net);
+ mutex_unlock(&ncm_opts->lock);
+ if (status)
+ return status;
+ ncm_opts->bound = true;
+ }
+ us = usb_gstrings_attach(cdev, ncm_strings,
+ ARRAY_SIZE(ncm_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ ncm_control_intf.iInterface = us[STRING_CTRL_IDX].id;
+ ncm_data_nop_intf.iInterface = us[STRING_DATA_IDX].id;
+ ncm_data_intf.iInterface = us[STRING_DATA_IDX].id;
+ ecm_desc.iMACAddress = us[STRING_MAC_IDX].id;
+ ncm_iad_desc.iFunction = us[STRING_IAD_IDX].id;
/* allocate instance-specific interface IDs */
status = usb_interface_id(c, f);
@@ -1259,74 +1293,128 @@ fail:
return status;
}
-static void
-ncm_unbind(struct usb_configuration *c, struct usb_function *f)
+static inline struct f_ncm_opts *to_f_ncm_opts(struct config_item *item)
{
- struct f_ncm *ncm = func_to_ncm(f);
+ return container_of(to_config_group(item), struct f_ncm_opts,
+ func_inst.group);
+}
- DBG(c->cdev, "ncm unbind\n");
+/* f_ncm_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(ncm);
- ncm_string_defs[0].id = 0;
- usb_free_all_descriptors(f);
+/* f_ncm_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(ncm);
- kfree(ncm->notify_req->buf);
- usb_ep_free_request(ncm->notify, ncm->notify_req);
+/* f_ncm_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(ncm);
+/* f_ncm_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(ncm);
+
+/* f_ncm_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(ncm);
+
+static struct configfs_attribute *ncm_attrs[] = {
+ &f_ncm_opts_dev_addr.attr,
+ &f_ncm_opts_host_addr.attr,
+ &f_ncm_opts_qmult.attr,
+ &f_ncm_opts_ifname.attr,
+ NULL,
+};
+
+static struct config_item_type ncm_func_type = {
+ .ct_item_ops = &ncm_item_ops,
+ .ct_attrs = ncm_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void ncm_free_inst(struct usb_function_instance *f)
+{
+ struct f_ncm_opts *opts;
+
+ opts = container_of(f, struct f_ncm_opts, func_inst);
+ if (opts->bound)
+ gether_cleanup(netdev_priv(opts->net));
+ else
+ free_netdev(opts->net);
+ kfree(opts);
+}
+
+static struct usb_function_instance *ncm_alloc_inst(void)
+{
+ struct f_ncm_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ mutex_init(&opts->lock);
+ opts->func_inst.free_func_inst = ncm_free_inst;
+ opts->net = gether_setup_default();
+ if (IS_ERR(opts->net))
+ return ERR_PTR(PTR_ERR(opts->net));
+
+ config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type);
+
+ return &opts->func_inst;
+}
+
+static void ncm_free(struct usb_function *f)
+{
+ struct f_ncm *ncm;
+ struct f_ncm_opts *opts;
+
+ ncm = func_to_ncm(f);
+ opts = container_of(f->fi, struct f_ncm_opts, func_inst);
kfree(ncm);
+ mutex_lock(&opts->lock);
+ opts->refcnt--;
+ mutex_unlock(&opts->lock);
}
-/**
- * ncm_bind_config - add CDC Network link to a configuration
- * @c: the configuration to support the network link
- * @ethaddr: a buffer in which the ethernet address of the host side
- * side of the link was recorded
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gether_setup(). Caller is also responsible
- * for calling @gether_cleanup() before module unload.
- */
-int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
- struct eth_dev *dev)
+static void ncm_unbind(struct usb_configuration *c, struct usb_function *f)
{
- struct f_ncm *ncm;
- int status;
+ struct f_ncm *ncm = func_to_ncm(f);
- if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
- return -EINVAL;
+ DBG(c->cdev, "ncm unbind\n");
- if (ncm_string_defs[0].id == 0) {
- status = usb_string_ids_tab(c->cdev, ncm_string_defs);
- if (status < 0)
- return status;
- ncm_control_intf.iInterface =
- ncm_string_defs[STRING_CTRL_IDX].id;
+ usb_free_all_descriptors(f);
- status = ncm_string_defs[STRING_DATA_IDX].id;
- ncm_data_nop_intf.iInterface = status;
- ncm_data_intf.iInterface = status;
+ kfree(ncm->notify_req->buf);
+ usb_ep_free_request(ncm->notify, ncm->notify_req);
+}
- ecm_desc.iMACAddress = ncm_string_defs[STRING_MAC_IDX].id;
- ncm_iad_desc.iFunction = ncm_string_defs[STRING_IAD_IDX].id;
- }
+struct usb_function *ncm_alloc(struct usb_function_instance *fi)
+{
+ struct f_ncm *ncm;
+ struct f_ncm_opts *opts;
+ int status;
/* allocate and initialize one new instance */
- ncm = kzalloc(sizeof *ncm, GFP_KERNEL);
+ ncm = kzalloc(sizeof(*ncm), GFP_KERNEL);
if (!ncm)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_ncm_opts, func_inst);
+ mutex_lock(&opts->lock);
+ opts->refcnt++;
/* export host's Ethernet address in CDC format */
- snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr);
+ status = gether_get_host_addr_cdc(opts->net, ncm->ethaddr,
+ sizeof(ncm->ethaddr));
+ if (status < 12) { /* strlen("01234567890a") */
+ kfree(ncm);
+ mutex_unlock(&opts->lock);
+ return ERR_PTR(-EINVAL);
+ }
ncm_string_defs[STRING_MAC_IDX].s = ncm->ethaddr;
spin_lock_init(&ncm->lock);
ncm_reset_values(ncm);
- ncm->port.ioport = dev;
+ ncm->port.ioport = netdev_priv(opts->net);
+ mutex_unlock(&opts->lock);
ncm->port.is_fixed = true;
ncm->port.func.name = "cdc_network";
- ncm->port.func.strings = ncm_strings;
/* descriptors are per-instance copies */
ncm->port.func.bind = ncm_bind;
ncm->port.func.unbind = ncm_unbind;
@@ -1334,12 +1422,14 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
ncm->port.func.get_alt = ncm_get_alt;
ncm->port.func.setup = ncm_setup;
ncm->port.func.disable = ncm_disable;
+ ncm->port.func.free_func = ncm_free;
ncm->port.wrap = ncm_wrap_ntb;
ncm->port.unwrap = ncm_unwrap_ntb;
- status = usb_add_function(c, &ncm->port.func);
- if (status)
- kfree(ncm);
- return status;
+ return &ncm->port.func;
}
+
+DECLARE_USB_FUNCTION_INIT(ncm, ncm_alloc_inst, ncm_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yauheni Kaliuta");
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 8aa2be5329b..ad39f1dacba 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -309,23 +309,20 @@ static int obex_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_obex *obex = func_to_obex(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
if (!can_support_obex(c))
return -EINVAL;
- if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
- status = usb_string_ids_tab(c->cdev, obex_string_defs);
- if (status < 0)
- return status;
- obex_control_intf.iInterface =
- obex_string_defs[OBEX_CTRL_IDX].id;
-
- status = obex_string_defs[OBEX_DATA_IDX].id;
- obex_data_nop_intf.iInterface = status;
- obex_data_intf.iInterface = status;
- }
+ us = usb_gstrings_attach(cdev, obex_strings,
+ ARRAY_SIZE(obex_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ obex_control_intf.iInterface = us[OBEX_CTRL_IDX].id;
+ obex_data_nop_intf.iInterface = us[OBEX_DATA_IDX].id;
+ obex_data_intf.iInterface = us[OBEX_DATA_IDX].id;
/* allocate instance-specific interface IDs, and patch descriptors */
@@ -406,57 +403,6 @@ fail:
return status;
}
-#ifdef USBF_OBEX_INCLUDED
-
-static void
-obex_old_unbind(struct usb_configuration *c, struct usb_function *f)
-{
- obex_string_defs[OBEX_CTRL_IDX].id = 0;
- usb_free_all_descriptors(f);
- kfree(func_to_obex(f));
-}
-
-/**
- * obex_bind_config - add a CDC OBEX function to a configuration
- * @c: the configuration to support the CDC OBEX instance
- * @port_num: /dev/ttyGS* port this interface will use
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- */
-int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
-{
- struct f_obex *obex;
- int status;
-
- /* allocate and initialize one new instance */
- obex = kzalloc(sizeof *obex, GFP_KERNEL);
- if (!obex)
- return -ENOMEM;
-
- obex->port_num = port_num;
-
- obex->port.connect = obex_connect;
- obex->port.disconnect = obex_disconnect;
-
- obex->port.func.name = "obex";
- obex->port.func.strings = obex_strings;
- /* descriptors are per-instance copies */
- obex->port.func.bind = obex_bind;
- obex->port.func.unbind = obex_old_unbind;
- obex->port.func.set_alt = obex_set_alt;
- obex->port.func.get_alt = obex_get_alt;
- obex->port.func.disable = obex_disable;
-
- status = usb_add_function(c, &obex->port.func);
- if (status)
- kfree(obex);
-
- return status;
-}
-
-#else
-
static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
{
return container_of(to_config_group(item), struct f_serial_opts,
@@ -550,7 +496,6 @@ static void obex_free(struct usb_function *f)
static void obex_unbind(struct usb_configuration *c, struct usb_function *f)
{
- obex_string_defs[OBEX_CTRL_IDX].id = 0;
usb_free_all_descriptors(f);
}
@@ -572,7 +517,6 @@ struct usb_function *obex_alloc(struct usb_function_instance *fi)
obex->port.disconnect = obex_disconnect;
obex->port.func.name = "obex";
- obex->port.func.strings = obex_strings;
/* descriptors are per-instance copies */
obex->port.func.bind = obex_bind;
obex->port.func.unbind = obex_unbind;
@@ -585,8 +529,5 @@ struct usb_function *obex_alloc(struct usb_function_instance *fi)
}
DECLARE_USB_FUNCTION_INIT(obex, obex_alloc_inst, obex_alloc);
-
-#endif
-
MODULE_AUTHOR("Felipe Balbi");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index b21ab558b6c..7944fb0efe3 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -13,6 +13,7 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/netdevice.h>
@@ -25,6 +26,7 @@
#include <linux/usb/composite.h>
#include "u_phonet.h"
+#include "u_ether.h"
#define PN_MEDIA_USB 0x1B
#define MAXPACKET 512
@@ -478,8 +480,7 @@ static void pn_disconnect(struct usb_function *f)
/*-------------------------------------------------------------------------*/
-static __init
-int pn_bind(struct usb_configuration *c, struct usb_function *f)
+static int pn_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct usb_gadget *gadget = cdev->gadget;
@@ -487,6 +488,27 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f)
struct usb_ep *ep;
int status, i;
+#ifndef USBF_PHONET_INCLUDED
+ struct f_phonet_opts *phonet_opts;
+
+ phonet_opts = container_of(f->fi, struct f_phonet_opts, func_inst);
+
+ /*
+ * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+ * configurations are bound in sequence with list_for_each_entry,
+ * in each configuration its functions are bound in sequence
+ * with list_for_each_entry, so we assume no race condition
+ * with regard to phonet_opts->bound access
+ */
+ if (!phonet_opts->bound) {
+ gphonet_set_gadget(phonet_opts->net, gadget);
+ status = gphonet_register_netdev(phonet_opts->net);
+ if (status)
+ return status;
+ phonet_opts->bound = true;
+ }
+#endif
+
/* Reserve interface IDs */
status = usb_interface_id(c, f);
if (status < 0)
@@ -560,8 +582,98 @@ err:
return status;
}
-static void
-pn_unbind(struct usb_configuration *c, struct usb_function *f)
+static inline struct f_phonet_opts *to_f_phonet_opts(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct f_phonet_opts,
+ func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_phonet_opts);
+static ssize_t f_phonet_attr_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *page)
+{
+ struct f_phonet_opts *opts = to_f_phonet_opts(item);
+ struct f_phonet_opts_attribute *f_phonet_opts_attr =
+ container_of(attr, struct f_phonet_opts_attribute, attr);
+ ssize_t ret = 0;
+
+ if (f_phonet_opts_attr->show)
+ ret = f_phonet_opts_attr->show(opts, page);
+ return ret;
+}
+
+static void phonet_attr_release(struct config_item *item)
+{
+ struct f_phonet_opts *opts = to_f_phonet_opts(item);
+
+ usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations phonet_item_ops = {
+ .release = phonet_attr_release,
+ .show_attribute = f_phonet_attr_show,
+};
+
+static ssize_t f_phonet_ifname_show(struct f_phonet_opts *opts, char *page)
+{
+ return gether_get_ifname(opts->net, page, PAGE_SIZE);
+}
+
+static struct f_phonet_opts_attribute f_phonet_ifname =
+ __CONFIGFS_ATTR_RO(ifname, f_phonet_ifname_show);
+
+static struct configfs_attribute *phonet_attrs[] = {
+ &f_phonet_ifname.attr,
+ NULL,
+};
+
+static struct config_item_type phonet_func_type = {
+ .ct_item_ops = &phonet_item_ops,
+ .ct_attrs = phonet_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void phonet_free_inst(struct usb_function_instance *f)
+{
+ struct f_phonet_opts *opts;
+
+ opts = container_of(f, struct f_phonet_opts, func_inst);
+ if (opts->bound)
+ gphonet_cleanup(opts->net);
+ else
+ free_netdev(opts->net);
+ kfree(opts);
+}
+
+static struct usb_function_instance *phonet_alloc_inst(void)
+{
+ struct f_phonet_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+
+ opts->func_inst.free_func_inst = phonet_free_inst;
+ opts->net = gphonet_setup_default();
+ if (IS_ERR(opts->net))
+ return ERR_PTR(PTR_ERR(opts->net));
+
+ config_group_init_type_name(&opts->func_inst.group, "",
+ &phonet_func_type);
+
+ return &opts->func_inst;
+}
+
+static void phonet_free(struct usb_function *f)
+{
+ struct f_phonet *phonet;
+
+ phonet = func_to_pn(f);
+ kfree(phonet);
+}
+
+static void pn_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_phonet *fp = func_to_pn(f);
int i;
@@ -574,61 +686,72 @@ pn_unbind(struct usb_configuration *c, struct usb_function *f)
usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
usb_free_all_descriptors(f);
- kfree(fp);
}
-/*-------------------------------------------------------------------------*/
-
-static struct net_device *dev;
-
-int __init phonet_bind_config(struct usb_configuration *c)
+struct usb_function *phonet_alloc(struct usb_function_instance *fi)
{
struct f_phonet *fp;
- int err, size;
+ struct f_phonet_opts *opts;
+ int size;
size = sizeof(*fp) + (phonet_rxq_size * sizeof(struct usb_request *));
fp = kzalloc(size, GFP_KERNEL);
if (!fp)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_phonet_opts, func_inst);
- fp->dev = dev;
+ fp->dev = opts->net;
fp->function.name = "phonet";
fp->function.bind = pn_bind;
fp->function.unbind = pn_unbind;
fp->function.set_alt = pn_set_alt;
fp->function.get_alt = pn_get_alt;
fp->function.disable = pn_disconnect;
+ fp->function.free_func = phonet_free;
spin_lock_init(&fp->rx.lock);
- err = usb_add_function(c, &fp->function);
- if (err)
- kfree(fp);
- return err;
+ return &fp->function;
}
-int __init gphonet_setup(struct usb_gadget *gadget)
+struct net_device *gphonet_setup_default(void)
{
+ struct net_device *dev;
struct phonet_port *port;
- int err;
/* Create net device */
- BUG_ON(dev);
dev = alloc_netdev(sizeof(*port), "upnlink%d", pn_net_setup);
if (!dev)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
port = netdev_priv(dev);
spin_lock_init(&port->lock);
netif_carrier_off(dev);
- SET_NETDEV_DEV(dev, &gadget->dev);
- err = register_netdev(dev);
- if (err)
- free_netdev(dev);
- return err;
+ return dev;
+}
+
+void gphonet_set_gadget(struct net_device *net, struct usb_gadget *g)
+{
+ SET_NETDEV_DEV(net, &g->dev);
+}
+
+int gphonet_register_netdev(struct net_device *net)
+{
+ int status;
+
+ status = register_netdev(net);
+ if (status)
+ free_netdev(net);
+
+ return status;
}
-void gphonet_cleanup(void)
+void gphonet_cleanup(struct net_device *dev)
{
unregister_netdev(dev);
}
+
+DECLARE_USB_FUNCTION_INIT(phonet, phonet_alloc_inst, phonet_alloc);
+MODULE_AUTHOR("Rémi Denis-Courmont");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 36e8c44d8e5..191df35ae69 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -17,15 +17,17 @@
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/atomic.h>
#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_rndis.h"
#include "rndis.h"
-
/*
* This function is an RNDIS Ethernet port -- a Microsoft protocol that's
* been promoted instead of the standard CDC Ethernet. The published RNDIS
@@ -655,6 +657,13 @@ static void rndis_close(struct gether *geth)
/*-------------------------------------------------------------------------*/
+/* Some controllers can't support RNDIS ... */
+static inline bool can_support_rndis(struct usb_configuration *c)
+{
+ /* everything else is *presumably* fine */
+ return true;
+}
+
/* ethernet function driver setup/binding */
static int
@@ -662,9 +671,41 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_rndis *rndis = func_to_rndis(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+#ifndef USB_FRNDIS_INCLUDED
+ struct f_rndis_opts *rndis_opts;
+
+ if (!can_support_rndis(c))
+ return -EINVAL;
+
+ rndis_opts = container_of(f->fi, struct f_rndis_opts, func_inst);
+
+ /*
+ * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+ * configurations are bound in sequence with list_for_each_entry,
+ * in each configuration its functions are bound in sequence
+ * with list_for_each_entry, so we assume no race condition
+ * with regard to rndis_opts->bound access
+ */
+ if (!rndis_opts->bound) {
+ gether_set_gadget(rndis_opts->net, cdev->gadget);
+ status = gether_register_netdev(rndis_opts->net);
+ if (status)
+ return status;
+ rndis_opts->bound = true;
+ }
+#endif
+ us = usb_gstrings_attach(cdev, rndis_strings,
+ ARRAY_SIZE(rndis_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ rndis_control_intf.iInterface = us[0].id;
+ rndis_data_intf.iInterface = us[1].id;
+ rndis_iad_descriptor.iFunction = us[2].id;
+
/* allocate instance-specific interface IDs */
status = usb_interface_id(c, f);
if (status < 0)
@@ -741,10 +782,12 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
rndis->port.open = rndis_open;
rndis->port.close = rndis_close;
+#ifdef USB_FRNDIS_INCLUDED
status = rndis_register(rndis_response_available, rndis);
if (status < 0)
goto fail;
rndis->config = status;
+#endif
rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0);
rndis_set_host_mac(rndis->config, rndis->ethaddr);
@@ -787,15 +830,15 @@ fail:
return status;
}
+#ifdef USB_FRNDIS_INCLUDED
+
static void
-rndis_unbind(struct usb_configuration *c, struct usb_function *f)
+rndis_old_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_rndis *rndis = func_to_rndis(f);
rndis_deregister(rndis->config);
- rndis_exit();
- rndis_string_defs[0].id = 0;
usb_free_all_descriptors(f);
kfree(rndis->notify_req->buf);
@@ -804,13 +847,6 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f)
kfree(rndis);
}
-/* Some controllers can't support RNDIS ... */
-static inline bool can_support_rndis(struct usb_configuration *c)
-{
- /* everything else is *presumably* fine */
- return true;
-}
-
int
rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
u32 vendorID, const char *manufacturer, struct eth_dev *dev)
@@ -818,24 +854,6 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
struct f_rndis *rndis;
int status;
- if (!can_support_rndis(c) || !ethaddr)
- return -EINVAL;
-
- if (rndis_string_defs[0].id == 0) {
- /* ... and setup RNDIS itself */
- status = rndis_init();
- if (status < 0)
- return status;
-
- status = usb_string_ids_tab(c->cdev, rndis_string_defs);
- if (status)
- return status;
-
- rndis_control_intf.iInterface = rndis_string_defs[0].id;
- rndis_data_intf.iInterface = rndis_string_defs[1].id;
- rndis_iad_descriptor.iFunction = rndis_string_defs[2].id;
- }
-
/* allocate and initialize one new instance */
status = -ENOMEM;
rndis = kzalloc(sizeof *rndis, GFP_KERNEL);
@@ -856,19 +874,178 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
rndis->port.unwrap = rndis_rm_hdr;
rndis->port.func.name = "rndis";
- rndis->port.func.strings = rndis_strings;
/* descriptors are per-instance copies */
rndis->port.func.bind = rndis_bind;
- rndis->port.func.unbind = rndis_unbind;
+ rndis->port.func.unbind = rndis_old_unbind;
rndis->port.func.set_alt = rndis_set_alt;
rndis->port.func.setup = rndis_setup;
rndis->port.func.disable = rndis_disable;
status = usb_add_function(c, &rndis->port.func);
- if (status) {
+ if (status)
kfree(rndis);
fail:
- rndis_exit();
- }
return status;
}
+
+#else
+
+void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net)
+{
+ struct f_rndis_opts *opts;
+
+ opts = container_of(f, struct f_rndis_opts, func_inst);
+ if (opts->bound)
+ gether_cleanup(netdev_priv(opts->net));
+ else
+ free_netdev(opts->net);
+ opts->borrowed_net = opts->bound = true;
+ opts->net = net;
+}
+EXPORT_SYMBOL(rndis_borrow_net);
+
+static inline struct f_rndis_opts *to_f_rndis_opts(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct f_rndis_opts,
+ func_inst.group);
+}
+
+/* f_rndis_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(rndis);
+
+/* f_rndis_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(rndis);
+
+/* f_rndis_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(rndis);
+
+/* f_rndis_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(rndis);
+
+/* f_rndis_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(rndis);
+
+static struct configfs_attribute *rndis_attrs[] = {
+ &f_rndis_opts_dev_addr.attr,
+ &f_rndis_opts_host_addr.attr,
+ &f_rndis_opts_qmult.attr,
+ &f_rndis_opts_ifname.attr,
+ NULL,
+};
+
+static struct config_item_type rndis_func_type = {
+ .ct_item_ops = &rndis_item_ops,
+ .ct_attrs = rndis_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void rndis_free_inst(struct usb_function_instance *f)
+{
+ struct f_rndis_opts *opts;
+
+ opts = container_of(f, struct f_rndis_opts, func_inst);
+ if (!opts->borrowed_net) {
+ if (opts->bound)
+ gether_cleanup(netdev_priv(opts->net));
+ else
+ free_netdev(opts->net);
+ }
+ kfree(opts);
+}
+
+static struct usb_function_instance *rndis_alloc_inst(void)
+{
+ struct f_rndis_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ mutex_init(&opts->lock);
+ opts->func_inst.free_func_inst = rndis_free_inst;
+ opts->net = gether_setup_default();
+ if (IS_ERR(opts->net))
+ return ERR_CAST(opts->net);
+
+ config_group_init_type_name(&opts->func_inst.group, "",
+ &rndis_func_type);
+
+ return &opts->func_inst;
+}
+
+static void rndis_free(struct usb_function *f)
+{
+ struct f_rndis *rndis;
+ struct f_rndis_opts *opts;
+
+ rndis = func_to_rndis(f);
+ rndis_deregister(rndis->config);
+ opts = container_of(f->fi, struct f_rndis_opts, func_inst);
+ kfree(rndis);
+ mutex_lock(&opts->lock);
+ opts->refcnt--;
+ mutex_unlock(&opts->lock);
+}
+
+static void rndis_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_rndis *rndis = func_to_rndis(f);
+
+ usb_free_all_descriptors(f);
+
+ kfree(rndis->notify_req->buf);
+ usb_ep_free_request(rndis->notify, rndis->notify_req);
+}
+
+static struct usb_function *rndis_alloc(struct usb_function_instance *fi)
+{
+ struct f_rndis *rndis;
+ struct f_rndis_opts *opts;
+ int status;
+
+ /* allocate and initialize one new instance */
+ rndis = kzalloc(sizeof(*rndis), GFP_KERNEL);
+ if (!rndis)
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_rndis_opts, func_inst);
+ mutex_lock(&opts->lock);
+ opts->refcnt++;
+
+ gether_get_host_addr_u8(opts->net, rndis->ethaddr);
+ rndis->vendorID = opts->vendor_id;
+ rndis->manufacturer = opts->manufacturer;
+
+ rndis->port.ioport = netdev_priv(opts->net);
+ mutex_unlock(&opts->lock);
+ /* RNDIS activates when the host changes this filter */
+ rndis->port.cdc_filter = 0;
+
+ /* RNDIS has special (and complex) framing */
+ rndis->port.header_len = sizeof(struct rndis_packet_msg_type);
+ rndis->port.wrap = rndis_add_header;
+ rndis->port.unwrap = rndis_rm_hdr;
+
+ rndis->port.func.name = "rndis";
+ /* descriptors are per-instance copies */
+ rndis->port.func.bind = rndis_bind;
+ rndis->port.func.unbind = rndis_unbind;
+ rndis->port.func.set_alt = rndis_set_alt;
+ rndis->port.func.setup = rndis_setup;
+ rndis->port.func.disable = rndis_disable;
+ rndis->port.func.free_func = rndis_free;
+
+ status = rndis_register(rndis_response_available, rndis);
+ if (status < 0) {
+ kfree(rndis);
+ return ERR_PTR(status);
+ }
+ rndis->config = status;
+
+ return &rndis->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(rndis, rndis_alloc_inst, rndis_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
+
+#endif
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 7be04b34249..5601e1d96c4 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -12,11 +12,13 @@
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include "u_ether.h"
-
+#include "u_ether_configfs.h"
+#include "u_gether.h"
/*
* This function packages a simple "CDC Subset" Ethernet port with no real
@@ -295,9 +297,40 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_gether *geth = func_to_geth(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+#ifndef USB_FSUBSET_INCLUDED
+ struct f_gether_opts *gether_opts;
+
+ gether_opts = container_of(f->fi, struct f_gether_opts, func_inst);
+
+ /*
+ * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+ * configurations are bound in sequence with list_for_each_entry,
+ * in each configuration its functions are bound in sequence
+ * with list_for_each_entry, so we assume no race condition
+ * with regard to gether_opts->bound access
+ */
+ if (!gether_opts->bound) {
+ mutex_lock(&gether_opts->lock);
+ gether_set_gadget(gether_opts->net, cdev->gadget);
+ status = gether_register_netdev(gether_opts->net);
+ mutex_unlock(&gether_opts->lock);
+ if (status)
+ return status;
+ gether_opts->bound = true;
+ }
+#endif
+ us = usb_gstrings_attach(cdev, geth_strings,
+ ARRAY_SIZE(geth_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+
+ subset_data_intf.iInterface = us[0].id;
+ ether_desc.iMACAddress = us[1].id;
+
/* allocate instance-specific interface IDs */
status = usb_interface_id(c, f);
if (status < 0)
@@ -360,8 +393,10 @@ fail:
return status;
}
+#ifdef USB_FSUBSET_INCLUDED
+
static void
-geth_unbind(struct usb_configuration *c, struct usb_function *f)
+geth_old_unbind(struct usb_configuration *c, struct usb_function *f)
{
geth_string_defs[0].id = 0;
usb_free_all_descriptors(f);
@@ -387,18 +422,6 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
struct f_gether *geth;
int status;
- if (!ethaddr)
- return -EINVAL;
-
- /* maybe allocate device-global string IDs */
- if (geth_string_defs[0].id == 0) {
- status = usb_string_ids_tab(c->cdev, geth_string_defs);
- if (status < 0)
- return status;
- subset_data_intf.iInterface = geth_string_defs[0].id;
- ether_desc.iMACAddress = geth_string_defs[1].id;
- }
-
/* allocate and initialize one new instance */
geth = kzalloc(sizeof *geth, GFP_KERNEL);
if (!geth)
@@ -412,9 +435,8 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
geth->port.cdc_filter = DEFAULT_FILTER;
geth->port.func.name = "cdc_subset";
- geth->port.func.strings = geth_strings;
geth->port.func.bind = geth_bind;
- geth->port.func.unbind = geth_unbind;
+ geth->port.func.unbind = geth_old_unbind;
geth->port.func.set_alt = geth_set_alt;
geth->port.func.disable = geth_disable;
@@ -423,3 +445,130 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
kfree(geth);
return status;
}
+
+#else
+
+static inline struct f_gether_opts *to_f_gether_opts(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct f_gether_opts,
+ func_inst.group);
+}
+
+/* f_gether_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(gether);
+
+/* f_gether_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(gether);
+
+/* f_gether_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(gether);
+
+/* f_gether_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(gether);
+
+/* f_gether_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(gether);
+
+static struct configfs_attribute *gether_attrs[] = {
+ &f_gether_opts_dev_addr.attr,
+ &f_gether_opts_host_addr.attr,
+ &f_gether_opts_qmult.attr,
+ &f_gether_opts_ifname.attr,
+ NULL,
+};
+
+static struct config_item_type gether_func_type = {
+ .ct_item_ops = &gether_item_ops,
+ .ct_attrs = gether_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void geth_free_inst(struct usb_function_instance *f)
+{
+ struct f_gether_opts *opts;
+
+ opts = container_of(f, struct f_gether_opts, func_inst);
+ if (opts->bound)
+ gether_cleanup(netdev_priv(opts->net));
+ else
+ free_netdev(opts->net);
+ kfree(opts);
+}
+
+static struct usb_function_instance *geth_alloc_inst(void)
+{
+ struct f_gether_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ mutex_init(&opts->lock);
+ opts->func_inst.free_func_inst = geth_free_inst;
+ opts->net = gether_setup_default();
+ if (IS_ERR(opts->net))
+ return ERR_CAST(opts->net);
+
+ config_group_init_type_name(&opts->func_inst.group, "",
+ &gether_func_type);
+
+ return &opts->func_inst;
+}
+
+static void geth_free(struct usb_function *f)
+{
+ struct f_gether *eth;
+
+ eth = func_to_geth(f);
+ kfree(eth);
+}
+
+static void geth_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ geth_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
+}
+
+static struct usb_function *geth_alloc(struct usb_function_instance *fi)
+{
+ struct f_gether *geth;
+ struct f_gether_opts *opts;
+ int status;
+
+ /* allocate and initialize one new instance */
+ geth = kzalloc(sizeof(*geth), GFP_KERNEL);
+ if (!geth)
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_gether_opts, func_inst);
+
+ mutex_lock(&opts->lock);
+ opts->refcnt++;
+ /* export host's Ethernet address in CDC format */
+ status = gether_get_host_addr_cdc(opts->net, geth->ethaddr,
+ sizeof(geth->ethaddr));
+ if (status < 12) {
+ kfree(geth);
+ mutex_unlock(&opts->lock);
+ return ERR_PTR(-EINVAL);
+ }
+ geth_string_defs[1].s = geth->ethaddr;
+
+ geth->port.ioport = netdev_priv(opts->net);
+ mutex_unlock(&opts->lock);
+ geth->port.cdc_filter = DEFAULT_FILTER;
+
+ geth->port.func.name = "cdc_subset";
+ geth->port.func.bind = geth_bind;
+ geth->port.func.unbind = geth_unbind;
+ geth->port.func.set_alt = geth_set_alt;
+ geth->port.func.disable = geth_disable;
+ geth->port.func.free_func = geth_free;
+
+ return &geth->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(geth, geth_alloc_inst, geth_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
+
+#endif
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index 03c1fb68664..2f23566e53d 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -90,6 +90,7 @@ struct uac2_req {
};
struct uac2_rtd_params {
+ struct snd_uac2_chip *uac2; /* parent chip */
bool ep_enabled; /* if the ep is enabled */
/* Size of the ring buffer */
size_t dma_bytes;
@@ -169,18 +170,6 @@ struct snd_uac2_chip *pdev_to_uac2(struct platform_device *p)
}
static inline
-struct snd_uac2_chip *prm_to_uac2(struct uac2_rtd_params *r)
-{
- struct snd_uac2_chip *uac2 = container_of(r,
- struct snd_uac2_chip, c_prm);
-
- if (&uac2->c_prm != r)
- uac2 = container_of(r, struct snd_uac2_chip, p_prm);
-
- return uac2;
-}
-
-static inline
uint num_channels(uint chanmask)
{
uint num = 0;
@@ -204,7 +193,7 @@ agdev_iso_complete(struct usb_ep *ep, struct usb_request *req)
struct uac2_req *ur = req->context;
struct snd_pcm_substream *substream;
struct uac2_rtd_params *prm = ur->pp;
- struct snd_uac2_chip *uac2 = prm_to_uac2(prm);
+ struct snd_uac2_chip *uac2 = prm->uac2;
/* i/f shutting down */
if (!prm->ep_enabled)
@@ -894,7 +883,7 @@ struct cntrl_range_lay3 {
static inline void
free_ep(struct uac2_rtd_params *prm, struct usb_ep *ep)
{
- struct snd_uac2_chip *uac2 = prm_to_uac2(prm);
+ struct snd_uac2_chip *uac2 = prm->uac2;
int i;
prm->ep_enabled = false;
@@ -970,6 +959,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
}
agdev->in_ep->driver_data = agdev;
+ uac2->p_prm.uac2 = uac2;
+ uac2->c_prm.uac2 = uac2;
+
hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
hs_epout_desc.wMaxPacketSize = fs_epout_desc.wMaxPacketSize;
hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 38dcedddc52..5f91c7a5994 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -156,8 +156,6 @@ static struct usb_endpoint_descriptor uvc_fs_streaming_ep __initdata = {
/* The wMaxPacketSize and bInterval values will be initialized from
* module parameters.
*/
- .wMaxPacketSize = 0,
- .bInterval = 0,
};
static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = {
@@ -169,8 +167,6 @@ static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = {
/* The wMaxPacketSize and bInterval values will be initialized from
* module parameters.
*/
- .wMaxPacketSize = 0,
- .bInterval = 0,
};
static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
@@ -183,17 +179,14 @@ static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
/* The wMaxPacketSize and bInterval values will be initialized from
* module parameters.
*/
- .wMaxPacketSize = 0,
- .bInterval = 0,
};
static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp __initdata = {
.bLength = sizeof(uvc_ss_streaming_comp),
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
- /* The following 3 values can be tweaked if necessary. */
- .bMaxBurst = 0,
- .bmAttributes = 0,
- .wBytesPerInterval = cpu_to_le16(1024),
+ /* The bMaxBurst, bmAttributes and wBytesPerInterval values will be
+ * initialized from module parameters.
+ */
};
static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c
new file mode 100644
index 00000000000..cce5535b1dc
--- /dev/null
+++ b/drivers/usb/gadget/fotg210-udc.c
@@ -0,0 +1,1219 @@
+/*
+ * FOTG210 UDC Driver supports Bulk transfer so far
+ *
+ * Copyright (C) 2013 Faraday Technology Corporation
+ *
+ * Author : Yuan-Hsin Chen <yhchen@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "fotg210.h"
+
+#define DRIVER_DESC "FOTG210 USB Device Controller Driver"
+#define DRIVER_VERSION "30-April-2013"
+
+static const char udc_name[] = "fotg210_udc";
+static const char * const fotg210_ep_name[] = {
+ "ep0", "ep1", "ep2", "ep3", "ep4"};
+
+static void fotg210_disable_fifo_int(struct fotg210_ep *ep)
+{
+ u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR1);
+
+ if (ep->dir_in)
+ value |= DMISGR1_MF_IN_INT(ep->epnum - 1);
+ else
+ value |= DMISGR1_MF_OUTSPK_INT(ep->epnum - 1);
+ iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR1);
+}
+
+static void fotg210_enable_fifo_int(struct fotg210_ep *ep)
+{
+ u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR1);
+
+ if (ep->dir_in)
+ value &= ~DMISGR1_MF_IN_INT(ep->epnum - 1);
+ else
+ value &= ~DMISGR1_MF_OUTSPK_INT(ep->epnum - 1);
+ iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR1);
+}
+
+static void fotg210_set_cxdone(struct fotg210_udc *fotg210)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_DCFESR);
+
+ value |= DCFESR_CX_DONE;
+ iowrite32(value, fotg210->reg + FOTG210_DCFESR);
+}
+
+static void fotg210_done(struct fotg210_ep *ep, struct fotg210_request *req,
+ int status)
+{
+ list_del_init(&req->queue);
+
+ /* don't modify queue heads during completion callback */
+ if (ep->fotg210->gadget.speed == USB_SPEED_UNKNOWN)
+ req->req.status = -ESHUTDOWN;
+ else
+ req->req.status = status;
+
+ spin_unlock(&ep->fotg210->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&ep->fotg210->lock);
+
+ if (ep->epnum) {
+ if (list_empty(&ep->queue))
+ fotg210_disable_fifo_int(ep);
+ } else {
+ fotg210_set_cxdone(ep->fotg210);
+ }
+}
+
+static void fotg210_fifo_ep_mapping(struct fotg210_ep *ep, u32 epnum,
+ u32 dir_in)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 val;
+
+ /* Driver should map an ep to a fifo and then map the fifo
+ * to the ep. What a brain-damaged design!
+ */
+
+ /* map a fifo to an ep */
+ val = ioread32(fotg210->reg + FOTG210_EPMAP);
+ val &= ~EPMAP_FIFONOMSK(epnum, dir_in);
+ val |= EPMAP_FIFONO(epnum, dir_in);
+ iowrite32(val, fotg210->reg + FOTG210_EPMAP);
+
+ /* map the ep to the fifo */
+ val = ioread32(fotg210->reg + FOTG210_FIFOMAP);
+ val &= ~FIFOMAP_EPNOMSK(epnum);
+ val |= FIFOMAP_EPNO(epnum);
+ iowrite32(val, fotg210->reg + FOTG210_FIFOMAP);
+
+ /* enable fifo */
+ val = ioread32(fotg210->reg + FOTG210_FIFOCF);
+ val |= FIFOCF_FIFO_EN(epnum - 1);
+ iowrite32(val, fotg210->reg + FOTG210_FIFOCF);
+}
+
+static void fotg210_set_fifo_dir(struct fotg210_ep *ep, u32 epnum, u32 dir_in)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 val;
+
+ val = ioread32(fotg210->reg + FOTG210_FIFOMAP);
+ val |= (dir_in ? FIFOMAP_DIRIN(epnum - 1) : FIFOMAP_DIROUT(epnum - 1));
+ iowrite32(val, fotg210->reg + FOTG210_FIFOMAP);
+}
+
+static void fotg210_set_tfrtype(struct fotg210_ep *ep, u32 epnum, u32 type)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 val;
+
+ val = ioread32(fotg210->reg + FOTG210_FIFOCF);
+ val |= FIFOCF_TYPE(type, epnum - 1);
+ iowrite32(val, fotg210->reg + FOTG210_FIFOCF);
+}
+
+static void fotg210_set_mps(struct fotg210_ep *ep, u32 epnum, u32 mps,
+ u32 dir_in)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 val;
+ u32 offset = dir_in ? FOTG210_INEPMPSR(epnum) :
+ FOTG210_OUTEPMPSR(epnum);
+
+ val = ioread32(fotg210->reg + offset);
+ val |= INOUTEPMPSR_MPS(mps);
+ iowrite32(val, fotg210->reg + offset);
+}
+
+static int fotg210_config_ep(struct fotg210_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+
+ fotg210_set_fifo_dir(ep, ep->epnum, ep->dir_in);
+ fotg210_set_tfrtype(ep, ep->epnum, ep->type);
+ fotg210_set_mps(ep, ep->epnum, ep->ep.maxpacket, ep->dir_in);
+ fotg210_fifo_ep_mapping(ep, ep->epnum, ep->dir_in);
+
+ fotg210->ep[ep->epnum] = ep;
+
+ return 0;
+}
+
+static int fotg210_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct fotg210_ep *ep;
+
+ ep = container_of(_ep, struct fotg210_ep, ep);
+
+ ep->desc = desc;
+ ep->epnum = usb_endpoint_num(desc);
+ ep->type = usb_endpoint_type(desc);
+ ep->dir_in = usb_endpoint_dir_in(desc);
+ ep->ep.maxpacket = usb_endpoint_maxp(desc);
+
+ return fotg210_config_ep(ep, desc);
+}
+
+static void fotg210_reset_tseq(struct fotg210_udc *fotg210, u8 epnum)
+{
+ struct fotg210_ep *ep = fotg210->ep[epnum];
+ u32 value;
+ void __iomem *reg;
+
+ reg = (ep->dir_in) ?
+ fotg210->reg + FOTG210_INEPMPSR(epnum) :
+ fotg210->reg + FOTG210_OUTEPMPSR(epnum);
+
+ /* Note: Driver needs to set and clear INOUTEPMPSR_RESET_TSEQ
+ * bit. Controller wouldn't clear this bit. WTF!!!
+ */
+
+ value = ioread32(reg);
+ value |= INOUTEPMPSR_RESET_TSEQ;
+ iowrite32(value, reg);
+
+ value = ioread32(reg);
+ value &= ~INOUTEPMPSR_RESET_TSEQ;
+ iowrite32(value, reg);
+}
+
+static int fotg210_ep_release(struct fotg210_ep *ep)
+{
+ if (!ep->epnum)
+ return 0;
+ ep->epnum = 0;
+ ep->stall = 0;
+ ep->wedged = 0;
+
+ fotg210_reset_tseq(ep->fotg210, ep->epnum);
+
+ return 0;
+}
+
+static int fotg210_ep_disable(struct usb_ep *_ep)
+{
+ struct fotg210_ep *ep;
+ struct fotg210_request *req;
+ unsigned long flags;
+
+ BUG_ON(!_ep);
+
+ ep = container_of(_ep, struct fotg210_ep, ep);
+
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next,
+ struct fotg210_request, queue);
+ spin_lock_irqsave(&ep->fotg210->lock, flags);
+ fotg210_done(ep, req, -ECONNRESET);
+ spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+ }
+
+ return fotg210_ep_release(ep);
+}
+
+static struct usb_request *fotg210_ep_alloc_request(struct usb_ep *_ep,
+ gfp_t gfp_flags)
+{
+ struct fotg210_request *req;
+
+ req = kzalloc(sizeof(struct fotg210_request), gfp_flags);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+static void fotg210_ep_free_request(struct usb_ep *_ep,
+ struct usb_request *_req)
+{
+ struct fotg210_request *req;
+
+ req = container_of(_req, struct fotg210_request, req);
+ kfree(req);
+}
+
+static void fotg210_enable_dma(struct fotg210_ep *ep,
+ dma_addr_t d, u32 len)
+{
+ u32 value;
+ struct fotg210_udc *fotg210 = ep->fotg210;
+
+ /* set transfer length and direction */
+ value = ioread32(fotg210->reg + FOTG210_DMACPSR1);
+ value &= ~(DMACPSR1_DMA_LEN(0xFFFF) | DMACPSR1_DMA_TYPE(1));
+ value |= DMACPSR1_DMA_LEN(len) | DMACPSR1_DMA_TYPE(ep->dir_in);
+ iowrite32(value, fotg210->reg + FOTG210_DMACPSR1);
+
+ /* set device DMA target FIFO number */
+ value = ioread32(fotg210->reg + FOTG210_DMATFNR);
+ if (ep->epnum)
+ value |= DMATFNR_ACC_FN(ep->epnum - 1);
+ else
+ value |= DMATFNR_ACC_CXF;
+ iowrite32(value, fotg210->reg + FOTG210_DMATFNR);
+
+ /* set DMA memory address */
+ iowrite32(d, fotg210->reg + FOTG210_DMACPSR2);
+
+ /* enable MDMA_EROR and MDMA_CMPLT interrupt */
+ value = ioread32(fotg210->reg + FOTG210_DMISGR2);
+ value &= ~(DMISGR2_MDMA_CMPLT | DMISGR2_MDMA_ERROR);
+ iowrite32(value, fotg210->reg + FOTG210_DMISGR2);
+
+ /* start DMA */
+ value = ioread32(fotg210->reg + FOTG210_DMACPSR1);
+ value |= DMACPSR1_DMA_START;
+ iowrite32(value, fotg210->reg + FOTG210_DMACPSR1);
+}
+
+static void fotg210_disable_dma(struct fotg210_ep *ep)
+{
+ iowrite32(DMATFNR_DISDMA, ep->fotg210->reg + FOTG210_DMATFNR);
+}
+
+static void fotg210_wait_dma_done(struct fotg210_ep *ep)
+{
+ u32 value;
+
+ do {
+ value = ioread32(ep->fotg210->reg + FOTG210_DISGR2);
+ if ((value & DISGR2_USBRST_INT) ||
+ (value & DISGR2_DMA_ERROR))
+ goto dma_reset;
+ } while (!(value & DISGR2_DMA_CMPLT));
+
+ value &= ~DISGR2_DMA_CMPLT;
+ iowrite32(value, ep->fotg210->reg + FOTG210_DISGR2);
+ return;
+
+dma_reset:
+ value = ioread32(ep->fotg210->reg + FOTG210_DMACPSR1);
+ value |= DMACPSR1_DMA_ABORT;
+ iowrite32(value, ep->fotg210->reg + FOTG210_DMACPSR1);
+
+ /* reset fifo */
+ if (ep->epnum) {
+ value = ioread32(ep->fotg210->reg +
+ FOTG210_FIBCR(ep->epnum - 1));
+ value |= FIBCR_FFRST;
+ iowrite32(value, ep->fotg210->reg +
+ FOTG210_FIBCR(ep->epnum - 1));
+ } else {
+ value = ioread32(ep->fotg210->reg + FOTG210_DCFESR);
+ value |= DCFESR_CX_CLR;
+ iowrite32(value, ep->fotg210->reg + FOTG210_DCFESR);
+ }
+}
+
+static void fotg210_start_dma(struct fotg210_ep *ep,
+ struct fotg210_request *req)
+{
+ dma_addr_t d;
+ u8 *buffer;
+ u32 length;
+
+ if (ep->epnum) {
+ if (ep->dir_in) {
+ buffer = req->req.buf;
+ length = req->req.length;
+ } else {
+ buffer = req->req.buf + req->req.actual;
+ length = ioread32(ep->fotg210->reg +
+ FOTG210_FIBCR(ep->epnum - 1));
+ length &= FIBCR_BCFX;
+ }
+ } else {
+ buffer = req->req.buf + req->req.actual;
+ if (req->req.length - req->req.actual > ep->ep.maxpacket)
+ length = ep->ep.maxpacket;
+ else
+ length = req->req.length;
+ }
+
+ d = dma_map_single(NULL, buffer, length,
+ ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(NULL, d)) {
+ pr_err("dma_mapping_error\n");
+ return;
+ }
+
+ dma_sync_single_for_device(NULL, d, length,
+ ep->dir_in ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+
+ fotg210_enable_dma(ep, d, length);
+
+ /* check if dma is done */
+ fotg210_wait_dma_done(ep);
+
+ fotg210_disable_dma(ep);
+
+ /* update actual transfer length */
+ req->req.actual += length;
+
+ dma_unmap_single(NULL, d, length, DMA_TO_DEVICE);
+}
+
+static void fotg210_ep0_queue(struct fotg210_ep *ep,
+ struct fotg210_request *req)
+{
+ if (!req->req.length) {
+ fotg210_done(ep, req, 0);
+ return;
+ }
+ if (ep->dir_in) { /* if IN */
+ if (req->req.length) {
+ fotg210_start_dma(ep, req);
+ } else {
+ pr_err("%s : req->req.length = 0x%x\n",
+ __func__, req->req.length);
+ }
+ if ((req->req.length == req->req.actual) ||
+ (req->req.actual < ep->ep.maxpacket))
+ fotg210_done(ep, req, 0);
+ } else { /* OUT */
+ if (!req->req.length) {
+ fotg210_done(ep, req, 0);
+ } else {
+ u32 value = ioread32(ep->fotg210->reg +
+ FOTG210_DMISGR0);
+
+ value &= ~DMISGR0_MCX_OUT_INT;
+ iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR0);
+ }
+ }
+}
+
+static int fotg210_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct fotg210_ep *ep;
+ struct fotg210_request *req;
+ unsigned long flags;
+ int request = 0;
+
+ ep = container_of(_ep, struct fotg210_ep, ep);
+ req = container_of(_req, struct fotg210_request, req);
+
+ if (ep->fotg210->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ spin_lock_irqsave(&ep->fotg210->lock, flags);
+
+ if (list_empty(&ep->queue))
+ request = 1;
+
+ list_add_tail(&req->queue, &ep->queue);
+
+ req->req.actual = 0;
+ req->req.status = -EINPROGRESS;
+
+ if (!ep->epnum) /* ep0 */
+ fotg210_ep0_queue(ep, req);
+ else if (request && !ep->stall)
+ fotg210_enable_fifo_int(ep);
+
+ spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+
+ return 0;
+}
+
+static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fotg210_ep *ep;
+ struct fotg210_request *req;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct fotg210_ep, ep);
+ req = container_of(_req, struct fotg210_request, req);
+
+ spin_lock_irqsave(&ep->fotg210->lock, flags);
+ if (!list_empty(&ep->queue))
+ fotg210_done(ep, req, -ECONNRESET);
+ spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+
+ return 0;
+}
+
+static void fotg210_set_epnstall(struct fotg210_ep *ep)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 value;
+ void __iomem *reg;
+
+ /* check if IN FIFO is empty before stall */
+ if (ep->dir_in) {
+ do {
+ value = ioread32(fotg210->reg + FOTG210_DCFESR);
+ } while (!(value & DCFESR_FIFO_EMPTY(ep->epnum - 1)));
+ }
+
+ reg = (ep->dir_in) ?
+ fotg210->reg + FOTG210_INEPMPSR(ep->epnum) :
+ fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum);
+ value = ioread32(reg);
+ value |= INOUTEPMPSR_STL_EP;
+ iowrite32(value, reg);
+}
+
+static void fotg210_clear_epnstall(struct fotg210_ep *ep)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 value;
+ void __iomem *reg;
+
+ reg = (ep->dir_in) ?
+ fotg210->reg + FOTG210_INEPMPSR(ep->epnum) :
+ fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum);
+ value = ioread32(reg);
+ value &= ~INOUTEPMPSR_STL_EP;
+ iowrite32(value, reg);
+}
+
+static int fotg210_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge)
+{
+ struct fotg210_ep *ep;
+ struct fotg210_udc *fotg210;
+ unsigned long flags;
+ int ret = 0;
+
+ ep = container_of(_ep, struct fotg210_ep, ep);
+
+ fotg210 = ep->fotg210;
+
+ spin_lock_irqsave(&ep->fotg210->lock, flags);
+
+ if (value) {
+ fotg210_set_epnstall(ep);
+ ep->stall = 1;
+ if (wedge)
+ ep->wedged = 1;
+ } else {
+ fotg210_reset_tseq(fotg210, ep->epnum);
+ fotg210_clear_epnstall(ep);
+ ep->stall = 0;
+ ep->wedged = 0;
+ if (!list_empty(&ep->queue))
+ fotg210_enable_fifo_int(ep);
+ }
+
+ spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+ return ret;
+}
+
+static int fotg210_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ return fotg210_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int fotg210_ep_set_wedge(struct usb_ep *_ep)
+{
+ return fotg210_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static void fotg210_ep_fifo_flush(struct usb_ep *_ep)
+{
+}
+
+static struct usb_ep_ops fotg210_ep_ops = {
+ .enable = fotg210_ep_enable,
+ .disable = fotg210_ep_disable,
+
+ .alloc_request = fotg210_ep_alloc_request,
+ .free_request = fotg210_ep_free_request,
+
+ .queue = fotg210_ep_queue,
+ .dequeue = fotg210_ep_dequeue,
+
+ .set_halt = fotg210_ep_set_halt,
+ .fifo_flush = fotg210_ep_fifo_flush,
+ .set_wedge = fotg210_ep_set_wedge,
+};
+
+static void fotg210_clear_tx0byte(struct fotg210_udc *fotg210)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_TX0BYTE);
+
+ value &= ~(TX0BYTE_EP1 | TX0BYTE_EP2 | TX0BYTE_EP3
+ | TX0BYTE_EP4);
+ iowrite32(value, fotg210->reg + FOTG210_TX0BYTE);
+}
+
+static void fotg210_clear_rx0byte(struct fotg210_udc *fotg210)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_RX0BYTE);
+
+ value &= ~(RX0BYTE_EP1 | RX0BYTE_EP2 | RX0BYTE_EP3
+ | RX0BYTE_EP4);
+ iowrite32(value, fotg210->reg + FOTG210_RX0BYTE);
+}
+
+/* read 8-byte setup packet only */
+static void fotg210_rdsetupp(struct fotg210_udc *fotg210,
+ u8 *buffer)
+{
+ int i = 0;
+ u8 *tmp = buffer;
+ u32 data;
+ u32 length = 8;
+
+ iowrite32(DMATFNR_ACC_CXF, fotg210->reg + FOTG210_DMATFNR);
+
+ for (i = (length >> 2); i > 0; i--) {
+ data = ioread32(fotg210->reg + FOTG210_CXPORT);
+ *tmp = data & 0xFF;
+ *(tmp + 1) = (data >> 8) & 0xFF;
+ *(tmp + 2) = (data >> 16) & 0xFF;
+ *(tmp + 3) = (data >> 24) & 0xFF;
+ tmp = tmp + 4;
+ }
+
+ switch (length % 4) {
+ case 1:
+ data = ioread32(fotg210->reg + FOTG210_CXPORT);
+ *tmp = data & 0xFF;
+ break;
+ case 2:
+ data = ioread32(fotg210->reg + FOTG210_CXPORT);
+ *tmp = data & 0xFF;
+ *(tmp + 1) = (data >> 8) & 0xFF;
+ break;
+ case 3:
+ data = ioread32(fotg210->reg + FOTG210_CXPORT);
+ *tmp = data & 0xFF;
+ *(tmp + 1) = (data >> 8) & 0xFF;
+ *(tmp + 2) = (data >> 16) & 0xFF;
+ break;
+ default:
+ break;
+ }
+
+ iowrite32(DMATFNR_DISDMA, fotg210->reg + FOTG210_DMATFNR);
+}
+
+static void fotg210_set_configuration(struct fotg210_udc *fotg210)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_DAR);
+
+ value |= DAR_AFT_CONF;
+ iowrite32(value, fotg210->reg + FOTG210_DAR);
+}
+
+static void fotg210_set_dev_addr(struct fotg210_udc *fotg210, u32 addr)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_DAR);
+
+ value |= (addr & 0x7F);
+ iowrite32(value, fotg210->reg + FOTG210_DAR);
+}
+
+static void fotg210_set_cxstall(struct fotg210_udc *fotg210)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_DCFESR);
+
+ value |= DCFESR_CX_STL;
+ iowrite32(value, fotg210->reg + FOTG210_DCFESR);
+}
+
+static void fotg210_request_error(struct fotg210_udc *fotg210)
+{
+ fotg210_set_cxstall(fotg210);
+ pr_err("request error!!\n");
+}
+
+static void fotg210_set_address(struct fotg210_udc *fotg210,
+ struct usb_ctrlrequest *ctrl)
+{
+ if (ctrl->wValue >= 0x0100) {
+ fotg210_request_error(fotg210);
+ } else {
+ fotg210_set_dev_addr(fotg210, ctrl->wValue);
+ fotg210_set_cxdone(fotg210);
+ }
+}
+
+static void fotg210_set_feature(struct fotg210_udc *fotg210,
+ struct usb_ctrlrequest *ctrl)
+{
+ switch (ctrl->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ fotg210_set_cxdone(fotg210);
+ break;
+ case USB_RECIP_INTERFACE:
+ fotg210_set_cxdone(fotg210);
+ break;
+ case USB_RECIP_ENDPOINT: {
+ u8 epnum;
+ epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+ if (epnum)
+ fotg210_set_epnstall(fotg210->ep[epnum]);
+ else
+ fotg210_set_cxstall(fotg210);
+ fotg210_set_cxdone(fotg210);
+ }
+ break;
+ default:
+ fotg210_request_error(fotg210);
+ break;
+ }
+}
+
+static void fotg210_clear_feature(struct fotg210_udc *fotg210,
+ struct usb_ctrlrequest *ctrl)
+{
+ struct fotg210_ep *ep =
+ fotg210->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK];
+
+ switch (ctrl->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ fotg210_set_cxdone(fotg210);
+ break;
+ case USB_RECIP_INTERFACE:
+ fotg210_set_cxdone(fotg210);
+ break;
+ case USB_RECIP_ENDPOINT:
+ if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) {
+ if (ep->wedged) {
+ fotg210_set_cxdone(fotg210);
+ break;
+ }
+ if (ep->stall)
+ fotg210_set_halt_and_wedge(&ep->ep, 0, 0);
+ }
+ fotg210_set_cxdone(fotg210);
+ break;
+ default:
+ fotg210_request_error(fotg210);
+ break;
+ }
+}
+
+static int fotg210_is_epnstall(struct fotg210_ep *ep)
+{
+ struct fotg210_udc *fotg210 = ep->fotg210;
+ u32 value;
+ void __iomem *reg;
+
+ reg = (ep->dir_in) ?
+ fotg210->reg + FOTG210_INEPMPSR(ep->epnum) :
+ fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum);
+ value = ioread32(reg);
+ return value & INOUTEPMPSR_STL_EP ? 1 : 0;
+}
+
+static void fotg210_get_status(struct fotg210_udc *fotg210,
+ struct usb_ctrlrequest *ctrl)
+{
+ u8 epnum;
+
+ switch (ctrl->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ fotg210->ep0_data = 1 << USB_DEVICE_SELF_POWERED;
+ break;
+ case USB_RECIP_INTERFACE:
+ fotg210->ep0_data = 0;
+ break;
+ case USB_RECIP_ENDPOINT:
+ epnum = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
+ if (epnum)
+ fotg210->ep0_data =
+ fotg210_is_epnstall(fotg210->ep[epnum])
+ << USB_ENDPOINT_HALT;
+ else
+ fotg210_request_error(fotg210);
+ break;
+
+ default:
+ fotg210_request_error(fotg210);
+ return; /* exit */
+ }
+
+ fotg210->ep0_req->buf = &fotg210->ep0_data;
+ fotg210->ep0_req->length = 2;
+
+ spin_unlock(&fotg210->lock);
+ fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_KERNEL);
+ spin_lock(&fotg210->lock);
+}
+
+static int fotg210_setup_packet(struct fotg210_udc *fotg210,
+ struct usb_ctrlrequest *ctrl)
+{
+ u8 *p = (u8 *)ctrl;
+ u8 ret = 0;
+
+ fotg210_rdsetupp(fotg210, p);
+
+ fotg210->ep[0]->dir_in = ctrl->bRequestType & USB_DIR_IN;
+
+ if (fotg210->gadget.speed == USB_SPEED_UNKNOWN) {
+ u32 value = ioread32(fotg210->reg + FOTG210_DMCR);
+ fotg210->gadget.speed = value & DMCR_HS_EN ?
+ USB_SPEED_HIGH : USB_SPEED_FULL;
+ }
+
+ /* check request */
+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+ switch (ctrl->bRequest) {
+ case USB_REQ_GET_STATUS:
+ fotg210_get_status(fotg210, ctrl);
+ break;
+ case USB_REQ_CLEAR_FEATURE:
+ fotg210_clear_feature(fotg210, ctrl);
+ break;
+ case USB_REQ_SET_FEATURE:
+ fotg210_set_feature(fotg210, ctrl);
+ break;
+ case USB_REQ_SET_ADDRESS:
+ fotg210_set_address(fotg210, ctrl);
+ break;
+ case USB_REQ_SET_CONFIGURATION:
+ fotg210_set_configuration(fotg210);
+ ret = 1;
+ break;
+ default:
+ ret = 1;
+ break;
+ }
+ } else {
+ ret = 1;
+ }
+
+ return ret;
+}
+
+static void fotg210_ep0out(struct fotg210_udc *fotg210)
+{
+ struct fotg210_ep *ep = fotg210->ep[0];
+
+ if (!list_empty(&ep->queue) && !ep->dir_in) {
+ struct fotg210_request *req;
+
+ req = list_first_entry(&ep->queue,
+ struct fotg210_request, queue);
+
+ if (req->req.length)
+ fotg210_start_dma(ep, req);
+
+ if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+ fotg210_done(ep, req, 0);
+ } else {
+ pr_err("%s : empty queue\n", __func__);
+ }
+}
+
+static void fotg210_ep0in(struct fotg210_udc *fotg210)
+{
+ struct fotg210_ep *ep = fotg210->ep[0];
+
+ if ((!list_empty(&ep->queue)) && (ep->dir_in)) {
+ struct fotg210_request *req;
+
+ req = list_entry(ep->queue.next,
+ struct fotg210_request, queue);
+
+ if (req->req.length)
+ fotg210_start_dma(ep, req);
+
+ if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+ fotg210_done(ep, req, 0);
+ } else {
+ fotg210_set_cxdone(fotg210);
+ }
+}
+
+static void fotg210_clear_comabt_int(struct fotg210_udc *fotg210)
+{
+ u32 value = ioread32(fotg210->reg + FOTG210_DISGR0);
+
+ value &= ~DISGR0_CX_COMABT_INT;
+ iowrite32(value, fotg210->reg + FOTG210_DISGR0);
+}
+
+static void fotg210_in_fifo_handler(struct fotg210_ep *ep)
+{
+ struct fotg210_request *req = list_entry(ep->queue.next,
+ struct fotg210_request, queue);
+
+ if (req->req.length)
+ fotg210_start_dma(ep, req);
+ fotg210_done(ep, req, 0);
+}
+
+static void fotg210_out_fifo_handler(struct fotg210_ep *ep)
+{
+ struct fotg210_request *req = list_entry(ep->queue.next,
+ struct fotg210_request, queue);
+
+ fotg210_start_dma(ep, req);
+
+ /* finish out transfer */
+ if (req->req.length == req->req.actual ||
+ req->req.actual < ep->ep.maxpacket)
+ fotg210_done(ep, req, 0);
+}
+
+static irqreturn_t fotg210_irq(int irq, void *_fotg210)
+{
+ struct fotg210_udc *fotg210 = _fotg210;
+ u32 int_grp = ioread32(fotg210->reg + FOTG210_DIGR);
+ u32 int_msk = ioread32(fotg210->reg + FOTG210_DMIGR);
+
+ int_grp &= ~int_msk;
+
+ spin_lock(&fotg210->lock);
+
+ if (int_grp & DIGR_INT_G2) {
+ void __iomem *reg = fotg210->reg + FOTG210_DISGR2;
+ u32 int_grp2 = ioread32(reg);
+ u32 int_msk2 = ioread32(fotg210->reg + FOTG210_DMISGR2);
+ u32 value;
+
+ int_grp2 &= ~int_msk2;
+
+ if (int_grp2 & DISGR2_USBRST_INT) {
+ value = ioread32(reg);
+ value &= ~DISGR2_USBRST_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 udc reset\n");
+ }
+ if (int_grp2 & DISGR2_SUSP_INT) {
+ value = ioread32(reg);
+ value &= ~DISGR2_SUSP_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 udc suspend\n");
+ }
+ if (int_grp2 & DISGR2_RESM_INT) {
+ value = ioread32(reg);
+ value &= ~DISGR2_RESM_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 udc resume\n");
+ }
+ if (int_grp2 & DISGR2_ISO_SEQ_ERR_INT) {
+ value = ioread32(reg);
+ value &= ~DISGR2_ISO_SEQ_ERR_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 iso sequence error\n");
+ }
+ if (int_grp2 & DISGR2_ISO_SEQ_ABORT_INT) {
+ value = ioread32(reg);
+ value &= ~DISGR2_ISO_SEQ_ABORT_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 iso sequence abort\n");
+ }
+ if (int_grp2 & DISGR2_TX0BYTE_INT) {
+ fotg210_clear_tx0byte(fotg210);
+ value = ioread32(reg);
+ value &= ~DISGR2_TX0BYTE_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 transferred 0 byte\n");
+ }
+ if (int_grp2 & DISGR2_RX0BYTE_INT) {
+ fotg210_clear_rx0byte(fotg210);
+ value = ioread32(reg);
+ value &= ~DISGR2_RX0BYTE_INT;
+ iowrite32(value, reg);
+ pr_info("fotg210 received 0 byte\n");
+ }
+ if (int_grp2 & DISGR2_DMA_ERROR) {
+ value = ioread32(reg);
+ value &= ~DISGR2_DMA_ERROR;
+ iowrite32(value, reg);
+ }
+ }
+
+ if (int_grp & DIGR_INT_G0) {
+ void __iomem *reg = fotg210->reg + FOTG210_DISGR0;
+ u32 int_grp0 = ioread32(reg);
+ u32 int_msk0 = ioread32(fotg210->reg + FOTG210_DMISGR0);
+ struct usb_ctrlrequest ctrl;
+
+ int_grp0 &= ~int_msk0;
+
+ /* the highest priority in this source register */
+ if (int_grp0 & DISGR0_CX_COMABT_INT) {
+ fotg210_clear_comabt_int(fotg210);
+ pr_info("fotg210 CX command abort\n");
+ }
+
+ if (int_grp0 & DISGR0_CX_SETUP_INT) {
+ if (fotg210_setup_packet(fotg210, &ctrl)) {
+ spin_unlock(&fotg210->lock);
+ if (fotg210->driver->setup(&fotg210->gadget,
+ &ctrl) < 0)
+ fotg210_set_cxstall(fotg210);
+ spin_lock(&fotg210->lock);
+ }
+ }
+ if (int_grp0 & DISGR0_CX_COMEND_INT)
+ pr_info("fotg210 cmd end\n");
+
+ if (int_grp0 & DISGR0_CX_IN_INT)
+ fotg210_ep0in(fotg210);
+
+ if (int_grp0 & DISGR0_CX_OUT_INT)
+ fotg210_ep0out(fotg210);
+
+ if (int_grp0 & DISGR0_CX_COMFAIL_INT) {
+ fotg210_set_cxstall(fotg210);
+ pr_info("fotg210 ep0 fail\n");
+ }
+ }
+
+ if (int_grp & DIGR_INT_G1) {
+ void __iomem *reg = fotg210->reg + FOTG210_DISGR1;
+ u32 int_grp1 = ioread32(reg);
+ u32 int_msk1 = ioread32(fotg210->reg + FOTG210_DMISGR1);
+ int fifo;
+
+ int_grp1 &= ~int_msk1;
+
+ for (fifo = 0; fifo < FOTG210_MAX_FIFO_NUM; fifo++) {
+ if (int_grp1 & DISGR1_IN_INT(fifo))
+ fotg210_in_fifo_handler(fotg210->ep[fifo + 1]);
+
+ if ((int_grp1 & DISGR1_OUT_INT(fifo)) ||
+ (int_grp1 & DISGR1_SPK_INT(fifo)))
+ fotg210_out_fifo_handler(fotg210->ep[fifo + 1]);
+ }
+ }
+
+ spin_unlock(&fotg210->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void fotg210_disable_unplug(struct fotg210_udc *fotg210)
+{
+ u32 reg = ioread32(fotg210->reg + FOTG210_PHYTMSR);
+
+ reg &= ~PHYTMSR_UNPLUG;
+ iowrite32(reg, fotg210->reg + FOTG210_PHYTMSR);
+}
+
+static int fotg210_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
+{
+ struct fotg210_udc *fotg210 = gadget_to_fotg210(g);
+ u32 value;
+
+ /* hook up the driver */
+ driver->driver.bus = NULL;
+ fotg210->driver = driver;
+
+ /* enable device global interrupt */
+ value = ioread32(fotg210->reg + FOTG210_DMCR);
+ value |= DMCR_GLINT_EN;
+ iowrite32(value, fotg210->reg + FOTG210_DMCR);
+
+ return 0;
+}
+
+static void fotg210_init(struct fotg210_udc *fotg210)
+{
+ u32 value;
+
+ /* disable global interrupt and set int polarity to active high */
+ iowrite32(GMIR_MHC_INT | GMIR_MOTG_INT | GMIR_INT_POLARITY,
+ fotg210->reg + FOTG210_GMIR);
+
+ /* disable device global interrupt */
+ value = ioread32(fotg210->reg + FOTG210_DMCR);
+ value &= ~DMCR_GLINT_EN;
+ iowrite32(value, fotg210->reg + FOTG210_DMCR);
+
+ /* disable all fifo interrupt */
+ iowrite32(~(u32)0, fotg210->reg + FOTG210_DMISGR1);
+
+ /* disable cmd end */
+ value = ioread32(fotg210->reg + FOTG210_DMISGR0);
+ value |= DMISGR0_MCX_COMEND;
+ iowrite32(value, fotg210->reg + FOTG210_DMISGR0);
+}
+
+static int fotg210_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
+{
+ struct fotg210_udc *fotg210 = gadget_to_fotg210(g);
+ unsigned long flags;
+
+ spin_lock_irqsave(&fotg210->lock, flags);
+
+ fotg210_init(fotg210);
+ fotg210->driver = NULL;
+
+ spin_unlock_irqrestore(&fotg210->lock, flags);
+
+ return 0;
+}
+
+static struct usb_gadget_ops fotg210_gadget_ops = {
+ .udc_start = fotg210_udc_start,
+ .udc_stop = fotg210_udc_stop,
+};
+
+static int __exit fotg210_udc_remove(struct platform_device *pdev)
+{
+ struct fotg210_udc *fotg210 = dev_get_drvdata(&pdev->dev);
+
+ usb_del_gadget_udc(&fotg210->gadget);
+ iounmap(fotg210->reg);
+ free_irq(platform_get_irq(pdev, 0), fotg210);
+
+ fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req);
+ kfree(fotg210);
+
+ return 0;
+}
+
+static int __init fotg210_udc_probe(struct platform_device *pdev)
+{
+ struct resource *res, *ires;
+ struct fotg210_udc *fotg210 = NULL;
+ struct fotg210_ep *_ep[FOTG210_MAX_NUM_EP];
+ int ret = 0;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ pr_err("platform_get_resource error.\n");
+ return -ENODEV;
+ }
+
+ ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!ires) {
+ pr_err("platform_get_resource IORESOURCE_IRQ error.\n");
+ return -ENODEV;
+ }
+
+ ret = -ENOMEM;
+
+ /* initialize udc */
+ fotg210 = kzalloc(sizeof(struct fotg210_udc), GFP_KERNEL);
+ if (fotg210 == NULL) {
+ pr_err("kzalloc error\n");
+ goto err_alloc;
+ }
+
+ for (i = 0; i < FOTG210_MAX_NUM_EP; i++) {
+ _ep[i] = kzalloc(sizeof(struct fotg210_ep), GFP_KERNEL);
+ if (_ep[i] == NULL) {
+ pr_err("_ep kzalloc error\n");
+ goto err_alloc;
+ }
+ fotg210->ep[i] = _ep[i];
+ }
+
+ fotg210->reg = ioremap(res->start, resource_size(res));
+ if (fotg210->reg == NULL) {
+ pr_err("ioremap error.\n");
+ goto err_map;
+ }
+
+ spin_lock_init(&fotg210->lock);
+
+ dev_set_drvdata(&pdev->dev, fotg210);
+
+ fotg210->gadget.ops = &fotg210_gadget_ops;
+
+ fotg210->gadget.max_speed = USB_SPEED_HIGH;
+ fotg210->gadget.dev.parent = &pdev->dev;
+ fotg210->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ fotg210->gadget.name = udc_name;
+
+ INIT_LIST_HEAD(&fotg210->gadget.ep_list);
+
+ for (i = 0; i < FOTG210_MAX_NUM_EP; i++) {
+ struct fotg210_ep *ep = fotg210->ep[i];
+
+ if (i) {
+ INIT_LIST_HEAD(&fotg210->ep[i]->ep.ep_list);
+ list_add_tail(&fotg210->ep[i]->ep.ep_list,
+ &fotg210->gadget.ep_list);
+ }
+ ep->fotg210 = fotg210;
+ INIT_LIST_HEAD(&ep->queue);
+ ep->ep.name = fotg210_ep_name[i];
+ ep->ep.ops = &fotg210_ep_ops;
+ }
+ fotg210->ep[0]->ep.maxpacket = 0x40;
+ fotg210->gadget.ep0 = &fotg210->ep[0]->ep;
+ INIT_LIST_HEAD(&fotg210->gadget.ep0->ep_list);
+
+ fotg210->ep0_req = fotg210_ep_alloc_request(&fotg210->ep[0]->ep,
+ GFP_KERNEL);
+ if (fotg210->ep0_req == NULL)
+ goto err_req;
+
+ fotg210_init(fotg210);
+
+ fotg210_disable_unplug(fotg210);
+
+ ret = request_irq(ires->start, fotg210_irq, IRQF_SHARED,
+ udc_name, fotg210);
+ if (ret < 0) {
+ pr_err("request_irq error (%d)\n", ret);
+ goto err_irq;
+ }
+
+ ret = usb_add_gadget_udc(&pdev->dev, &fotg210->gadget);
+ if (ret)
+ goto err_add_udc;
+
+ dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+
+ return 0;
+
+err_add_udc:
+err_irq:
+ free_irq(ires->start, fotg210);
+
+err_req:
+ fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req);
+
+err_map:
+ if (fotg210->reg)
+ iounmap(fotg210->reg);
+
+err_alloc:
+ kfree(fotg210);
+
+ return ret;
+}
+
+static struct platform_driver fotg210_driver = {
+ .driver = {
+ .name = (char *)udc_name,
+ .owner = THIS_MODULE,
+ },
+ .probe = fotg210_udc_probe,
+ .remove = fotg210_udc_remove,
+};
+
+module_platform_driver(fotg210_driver);
+
+MODULE_AUTHOR("Yuan-Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/gadget/fotg210.h b/drivers/usb/gadget/fotg210.h
new file mode 100644
index 00000000000..bbf991bcbe7
--- /dev/null
+++ b/drivers/usb/gadget/fotg210.h
@@ -0,0 +1,253 @@
+/*
+ * Faraday FOTG210 USB OTG controller
+ *
+ * Copyright (C) 2013 Faraday Technology Corporation
+ * Author: Yuan-Hsin Chen <yhchen@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+
+#define FOTG210_MAX_NUM_EP 5 /* ep0...ep4 */
+#define FOTG210_MAX_FIFO_NUM 4 /* fifo0...fifo4 */
+
+/* Global Mask of HC/OTG/DEV interrupt Register(0xC4) */
+#define FOTG210_GMIR 0xC4
+#define GMIR_INT_POLARITY 0x8 /*Active High*/
+#define GMIR_MHC_INT 0x4
+#define GMIR_MOTG_INT 0x2
+#define GMIR_MDEV_INT 0x1
+
+/* Device Main Control Register(0x100) */
+#define FOTG210_DMCR 0x100
+#define DMCR_HS_EN (1 << 6)
+#define DMCR_CHIP_EN (1 << 5)
+#define DMCR_SFRST (1 << 4)
+#define DMCR_GOSUSP (1 << 3)
+#define DMCR_GLINT_EN (1 << 2)
+#define DMCR_HALF_SPEED (1 << 1)
+#define DMCR_CAP_RMWAKUP (1 << 0)
+
+/* Device Address Register(0x104) */
+#define FOTG210_DAR 0x104
+#define DAR_AFT_CONF (1 << 7)
+
+/* Device Test Register(0x108) */
+#define FOTG210_DTR 0x108
+#define DTR_TST_CLRFF (1 << 0)
+
+/* PHY Test Mode Selector register(0x114) */
+#define FOTG210_PHYTMSR 0x114
+#define PHYTMSR_TST_PKT (1 << 4)
+#define PHYTMSR_TST_SE0NAK (1 << 3)
+#define PHYTMSR_TST_KSTA (1 << 2)
+#define PHYTMSR_TST_JSTA (1 << 1)
+#define PHYTMSR_UNPLUG (1 << 0)
+
+/* Cx configuration and FIFO Empty Status register(0x120) */
+#define FOTG210_DCFESR 0x120
+#define DCFESR_FIFO_EMPTY(fifo) (1 << 8 << (fifo))
+#define DCFESR_CX_EMP (1 << 5)
+#define DCFESR_CX_CLR (1 << 3)
+#define DCFESR_CX_STL (1 << 2)
+#define DCFESR_TST_PKDONE (1 << 1)
+#define DCFESR_CX_DONE (1 << 0)
+
+/* Device IDLE Counter Register(0x124) */
+#define FOTG210_DICR 0x124
+
+/* Device Mask of Interrupt Group Register (0x130) */
+#define FOTG210_DMIGR 0x130
+#define DMIGR_MINT_G0 (1 << 0)
+
+/* Device Mask of Interrupt Source Group 0(0x134) */
+#define FOTG210_DMISGR0 0x134
+#define DMISGR0_MCX_COMEND (1 << 3)
+#define DMISGR0_MCX_OUT_INT (1 << 2)
+#define DMISGR0_MCX_IN_INT (1 << 1)
+#define DMISGR0_MCX_SETUP_INT (1 << 0)
+
+/* Device Mask of Interrupt Source Group 1 Register(0x138)*/
+#define FOTG210_DMISGR1 0x138
+#define DMISGR1_MF3_IN_INT (1 << 19)
+#define DMISGR1_MF2_IN_INT (1 << 18)
+#define DMISGR1_MF1_IN_INT (1 << 17)
+#define DMISGR1_MF0_IN_INT (1 << 16)
+#define DMISGR1_MF_IN_INT(fifo) (1 << (16 + (fifo)))
+#define DMISGR1_MF3_SPK_INT (1 << 7)
+#define DMISGR1_MF3_OUT_INT (1 << 6)
+#define DMISGR1_MF2_SPK_INT (1 << 5)
+#define DMISGR1_MF2_OUT_INT (1 << 4)
+#define DMISGR1_MF1_SPK_INT (1 << 3)
+#define DMISGR1_MF1_OUT_INT (1 << 2)
+#define DMISGR1_MF0_SPK_INT (1 << 1)
+#define DMISGR1_MF0_OUT_INT (1 << 0)
+#define DMISGR1_MF_OUTSPK_INT(fifo) (0x3 << (fifo) * 2)
+
+/* Device Mask of Interrupt Source Group 2 Register (0x13C) */
+#define FOTG210_DMISGR2 0x13C
+#define DMISGR2_MDMA_ERROR (1 << 8)
+#define DMISGR2_MDMA_CMPLT (1 << 7)
+
+/* Device Interrupt group Register (0x140) */
+#define FOTG210_DIGR 0x140
+#define DIGR_INT_G2 (1 << 2)
+#define DIGR_INT_G1 (1 << 1)
+#define DIGR_INT_G0 (1 << 0)
+
+/* Device Interrupt Source Group 0 Register (0x144) */
+#define FOTG210_DISGR0 0x144
+#define DISGR0_CX_COMABT_INT (1 << 5)
+#define DISGR0_CX_COMFAIL_INT (1 << 4)
+#define DISGR0_CX_COMEND_INT (1 << 3)
+#define DISGR0_CX_OUT_INT (1 << 2)
+#define DISGR0_CX_IN_INT (1 << 1)
+#define DISGR0_CX_SETUP_INT (1 << 0)
+
+/* Device Interrupt Source Group 1 Register (0x148) */
+#define FOTG210_DISGR1 0x148
+#define DISGR1_OUT_INT(fifo) (1 << ((fifo) * 2))
+#define DISGR1_SPK_INT(fifo) (1 << 1 << ((fifo) * 2))
+#define DISGR1_IN_INT(fifo) (1 << 16 << (fifo))
+
+/* Device Interrupt Source Group 2 Register (0x14C) */
+#define FOTG210_DISGR2 0x14C
+#define DISGR2_DMA_ERROR (1 << 8)
+#define DISGR2_DMA_CMPLT (1 << 7)
+#define DISGR2_RX0BYTE_INT (1 << 6)
+#define DISGR2_TX0BYTE_INT (1 << 5)
+#define DISGR2_ISO_SEQ_ABORT_INT (1 << 4)
+#define DISGR2_ISO_SEQ_ERR_INT (1 << 3)
+#define DISGR2_RESM_INT (1 << 2)
+#define DISGR2_SUSP_INT (1 << 1)
+#define DISGR2_USBRST_INT (1 << 0)
+
+/* Device Receive Zero-Length Data Packet Register (0x150)*/
+#define FOTG210_RX0BYTE 0x150
+#define RX0BYTE_EP8 (1 << 7)
+#define RX0BYTE_EP7 (1 << 6)
+#define RX0BYTE_EP6 (1 << 5)
+#define RX0BYTE_EP5 (1 << 4)
+#define RX0BYTE_EP4 (1 << 3)
+#define RX0BYTE_EP3 (1 << 2)
+#define RX0BYTE_EP2 (1 << 1)
+#define RX0BYTE_EP1 (1 << 0)
+
+/* Device Transfer Zero-Length Data Packet Register (0x154)*/
+#define FOTG210_TX0BYTE 0x154
+#define TX0BYTE_EP8 (1 << 7)
+#define TX0BYTE_EP7 (1 << 6)
+#define TX0BYTE_EP6 (1 << 5)
+#define TX0BYTE_EP5 (1 << 4)
+#define TX0BYTE_EP4 (1 << 3)
+#define TX0BYTE_EP3 (1 << 2)
+#define TX0BYTE_EP2 (1 << 1)
+#define TX0BYTE_EP1 (1 << 0)
+
+/* Device IN Endpoint x MaxPacketSize Register(0x160+4*(x-1)) */
+#define FOTG210_INEPMPSR(ep) (0x160 + 4 * ((ep) - 1))
+#define INOUTEPMPSR_MPS(mps) ((mps) & 0x2FF)
+#define INOUTEPMPSR_STL_EP (1 << 11)
+#define INOUTEPMPSR_RESET_TSEQ (1 << 12)
+
+/* Device OUT Endpoint x MaxPacketSize Register(0x180+4*(x-1)) */
+#define FOTG210_OUTEPMPSR(ep) (0x180 + 4 * ((ep) - 1))
+
+/* Device Endpoint 1~4 Map Register (0x1A0) */
+#define FOTG210_EPMAP 0x1A0
+#define EPMAP_FIFONO(ep, dir) \
+ ((((ep) - 1) << ((ep) - 1) * 8) << ((dir) ? 0 : 4))
+#define EPMAP_FIFONOMSK(ep, dir) \
+ ((3 << ((ep) - 1) * 8) << ((dir) ? 0 : 4))
+
+/* Device FIFO Map Register (0x1A8) */
+#define FOTG210_FIFOMAP 0x1A8
+#define FIFOMAP_DIROUT(fifo) (0x0 << 4 << (fifo) * 8)
+#define FIFOMAP_DIRIN(fifo) (0x1 << 4 << (fifo) * 8)
+#define FIFOMAP_BIDIR(fifo) (0x2 << 4 << (fifo) * 8)
+#define FIFOMAP_NA(fifo) (0x3 << 4 << (fifo) * 8)
+#define FIFOMAP_EPNO(ep) ((ep) << ((ep) - 1) * 8)
+#define FIFOMAP_EPNOMSK(ep) (0xF << ((ep) - 1) * 8)
+
+/* Device FIFO Confuguration Register (0x1AC) */
+#define FOTG210_FIFOCF 0x1AC
+#define FIFOCF_TYPE(type, fifo) ((type) << (fifo) * 8)
+#define FIFOCF_BLK_SIN(fifo) (0x0 << (fifo) * 8 << 2)
+#define FIFOCF_BLK_DUB(fifo) (0x1 << (fifo) * 8 << 2)
+#define FIFOCF_BLK_TRI(fifo) (0x2 << (fifo) * 8 << 2)
+#define FIFOCF_BLKSZ_512(fifo) (0x0 << (fifo) * 8 << 4)
+#define FIFOCF_BLKSZ_1024(fifo) (0x1 << (fifo) * 8 << 4)
+#define FIFOCF_FIFO_EN(fifo) (0x1 << (fifo) * 8 << 5)
+
+/* Device FIFO n Instruction and Byte Count Register (0x1B0+4*n) */
+#define FOTG210_FIBCR(fifo) (0x1B0 + (fifo) * 4)
+#define FIBCR_BCFX 0x7FF
+#define FIBCR_FFRST (1 << 12)
+
+/* Device DMA Target FIFO Number Register (0x1C0) */
+#define FOTG210_DMATFNR 0x1C0
+#define DMATFNR_ACC_CXF (1 << 4)
+#define DMATFNR_ACC_F3 (1 << 3)
+#define DMATFNR_ACC_F2 (1 << 2)
+#define DMATFNR_ACC_F1 (1 << 1)
+#define DMATFNR_ACC_F0 (1 << 0)
+#define DMATFNR_ACC_FN(fifo) (1 << (fifo))
+#define DMATFNR_DISDMA 0
+
+/* Device DMA Controller Parameter setting 1 Register (0x1C8) */
+#define FOTG210_DMACPSR1 0x1C8
+#define DMACPSR1_DMA_LEN(len) (((len) & 0xFFFF) << 8)
+#define DMACPSR1_DMA_ABORT (1 << 3)
+#define DMACPSR1_DMA_TYPE(dir_in) (((dir_in) ? 1 : 0) << 1)
+#define DMACPSR1_DMA_START (1 << 0)
+
+/* Device DMA Controller Parameter setting 2 Register (0x1CC) */
+#define FOTG210_DMACPSR2 0x1CC
+
+/* Device DMA Controller Parameter setting 3 Register (0x1CC) */
+#define FOTG210_CXPORT 0x1D0
+
+struct fotg210_request {
+ struct usb_request req;
+ struct list_head queue;
+};
+
+struct fotg210_ep {
+ struct usb_ep ep;
+ struct fotg210_udc *fotg210;
+
+ struct list_head queue;
+ unsigned stall:1;
+ unsigned wedged:1;
+ unsigned use_dma:1;
+
+ unsigned char epnum;
+ unsigned char type;
+ unsigned char dir_in;
+ unsigned int maxp;
+ const struct usb_endpoint_descriptor *desc;
+};
+
+struct fotg210_udc {
+ spinlock_t lock; /* protect the struct */
+ void __iomem *reg;
+
+ unsigned long irq_trigger;
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+
+ struct fotg210_ep *ep[FOTG210_MAX_NUM_EP];
+
+ struct usb_request *ep0_req; /* for internal request */
+ __le16 ep0_data;
+ u8 ep0_dir; /* 0/0x80 out/in */
+
+ u8 reenum; /* if re-enumeration */
+};
+
+#define gadget_to_fotg210(g) container_of((g), struct fotg210_udc, gadget)
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 9a7ee3347e4..f3bb363f1d4 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2589,7 +2589,7 @@ static int qe_udc_probe(struct platform_device *ofdev)
if (ret)
goto err6;
- dev_set_drvdata(&ofdev->dev, udc);
+ platform_set_drvdata(ofdev, udc);
dev_info(udc->dev,
"%s USB controller initialized as device\n",
(udc->soc_type == PORT_QE) ? "QE" : "CPM");
@@ -2640,7 +2640,7 @@ static int qe_udc_resume(struct platform_device *dev)
static int qe_udc_remove(struct platform_device *ofdev)
{
- struct qe_udc *udc = dev_get_drvdata(&ofdev->dev);
+ struct qe_udc *udc = platform_get_drvdata(ofdev);
struct qe_ep *ep;
unsigned int size;
DECLARE_COMPLETION(done);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index b8632d40f8b..c83f3e16532 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1347,7 +1347,7 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
static int __exit fusb300_remove(struct platform_device *pdev)
{
- struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev);
+ struct fusb300 *fusb300 = platform_get_drvdata(pdev);
usb_del_gadget_udc(&fusb300->gadget);
iounmap(fusb300->reg);
@@ -1416,7 +1416,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
spin_lock_init(&fusb300->lock);
- dev_set_drvdata(&pdev->dev, fusb300);
+ platform_set_drvdata(pdev, fusb300);
fusb300->gadget.ops = &fusb300_gadget_ops;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 787a78e92aa..5327c82472e 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -28,15 +28,18 @@
# define USB_ETH_RNDIS y
# endif
+#define USBF_ECM_INCLUDED
# include "f_ecm.c"
+#define USB_FSUBSET_INCLUDED
# include "f_subset.c"
# ifdef USB_ETH_RNDIS
+# define USB_FRNDIS_INCLUDED
# include "f_rndis.c"
-# include "rndis.c"
+# include "rndis.h"
# endif
-# include "u_ether.c"
+# include "u_ether.h"
-static u8 gfs_hostaddr[ETH_ALEN];
+static u8 gfs_host_mac[ETH_ALEN];
static struct eth_dev *the_dev;
# ifdef CONFIG_USB_FUNCTIONFS_ETH
static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
@@ -45,7 +48,7 @@ static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
#else
# define the_dev NULL
# define gether_cleanup(dev) do { } while (0)
-# define gfs_hostaddr NULL
+# define gfs_host_mac NULL
struct eth_dev;
#endif
@@ -73,6 +76,8 @@ struct gfs_ffs_obj {
USB_GADGET_COMPOSITE_OPTIONS();
+USB_ETHERNET_MODULE_PARAMETERS();
+
static struct usb_device_descriptor gfs_dev_desc = {
.bLength = sizeof gfs_dev_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -350,7 +355,8 @@ static int gfs_bind(struct usb_composite_dev *cdev)
if (missing_funcs)
return -ENODEV;
#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
- the_dev = gether_setup(cdev->gadget, gfs_hostaddr);
+ the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, gfs_host_mac,
+ qmult);
#endif
if (IS_ERR(the_dev)) {
ret = PTR_ERR(the_dev);
@@ -446,7 +452,7 @@ static int gfs_do_config(struct usb_configuration *c)
}
if (gc->eth) {
- ret = gc->eth(c, gfs_hostaddr, the_dev);
+ ret = gc->eth(c, gfs_host_mac, the_dev);
if (unlikely(ret < 0))
return ret;
}
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 51cfe72da5b..46ba9838c3a 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1533,7 +1533,7 @@ static const struct usb_gadget_ops m66592_gadget_ops = {
static int __exit m66592_remove(struct platform_device *pdev)
{
- struct m66592 *m66592 = dev_get_drvdata(&pdev->dev);
+ struct m66592 *m66592 = platform_get_drvdata(pdev);
usb_del_gadget_udc(&m66592->gadget);
@@ -1602,7 +1602,7 @@ static int __init m66592_probe(struct platform_device *pdev)
m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
spin_lock_init(&m66592->lock);
- dev_set_drvdata(&pdev->dev, m66592);
+ platform_set_drvdata(pdev, m66592);
m66592->gadget.ops = &m66592_gadget_ops;
m66592->gadget.max_speed = USB_SPEED_HIGH;
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 4a45e80c6e3..032b96a51ce 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -43,16 +43,19 @@ MODULE_LICENSE("GPL");
*/
#include "f_mass_storage.c"
+#define USBF_ECM_INCLUDED
#include "f_ecm.c"
-#include "f_subset.c"
#ifdef USB_ETH_RNDIS
+# define USB_FRNDIS_INCLUDED
# include "f_rndis.c"
-# include "rndis.c"
+# include "rndis.h"
#endif
-#include "u_ether.c"
+#include "u_ether.h"
USB_GADGET_COMPOSITE_OPTIONS();
+USB_ETHERNET_MODULE_PARAMETERS();
+
/***************************** Device Descriptor ****************************/
#define MULTI_VENDOR_NUM 0x1d6b /* Linux Foundation */
@@ -133,7 +136,7 @@ FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
static struct fsg_common fsg_common;
-static u8 hostaddr[ETH_ALEN];
+static u8 host_mac[ETH_ALEN];
static struct usb_function_instance *fi_acm;
static struct eth_dev *the_dev;
@@ -152,7 +155,7 @@ static __init int rndis_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- ret = rndis_bind_config(c, hostaddr, the_dev);
+ ret = rndis_bind_config(c, host_mac, the_dev);
if (ret < 0)
return ret;
@@ -216,7 +219,7 @@ static __init int cdc_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- ret = ecm_bind_config(c, hostaddr, the_dev);
+ ret = ecm_bind_config(c, host_mac, the_dev);
if (ret < 0)
return ret;
@@ -280,7 +283,8 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
}
/* set up network link layer */
- the_dev = gether_setup(cdev->gadget, hostaddr);
+ the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
+ qmult);
if (IS_ERR(the_dev))
return PTR_ERR(the_dev);
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index 58288e9cf72..07fdb3eaf48 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -1786,8 +1786,6 @@ static int mv_u3d_remove(struct platform_device *dev)
clk_put(u3d->clk);
- platform_set_drvdata(dev, NULL);
-
kfree(u3d);
return 0;
@@ -1997,7 +1995,6 @@ err_map_cap_regs:
err_get_cap_regs:
err_get_clk:
clk_put(u3d->clk);
- platform_set_drvdata(dev, NULL);
kfree(u3d);
err_alloc_private:
err_pdata:
@@ -2053,7 +2050,7 @@ static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
static void mv_u3d_shutdown(struct platform_device *dev)
{
- struct mv_u3d *u3d = dev_get_drvdata(&dev->dev);
+ struct mv_u3d *u3d = platform_get_drvdata(dev);
u32 tmp;
tmp = ioread32(&u3d->op_regs->usbcmd);
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 3b02fd4649c..81956feca1b 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -24,23 +24,12 @@
#include <linux/usb/composite.h>
#include "u_ether.h"
+#include "u_ncm.h"
#define DRIVER_DESC "NCM Gadget"
/*-------------------------------------------------------------------------*/
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module. So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_ncm.c"
-#include "u_ether.c"
-
-/*-------------------------------------------------------------------------*/
-
/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
* Instead: allocate your own, using normal USB-IF procedures.
*/
@@ -54,6 +43,8 @@
/*-------------------------------------------------------------------------*/
USB_GADGET_COMPOSITE_OPTIONS();
+USB_ETHERNET_MODULE_PARAMETERS();
+
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -111,13 +102,15 @@ static struct usb_gadget_strings *dev_strings[] = {
NULL,
};
-struct eth_dev *the_dev;
-static u8 hostaddr[ETH_ALEN];
+static struct usb_function_instance *f_ncm_inst;
+static struct usb_function *f_ncm;
/*-------------------------------------------------------------------------*/
static int __init ncm_do_config(struct usb_configuration *c)
{
+ int status;
+
/* FIXME alloc iConfiguration string, set it in c->strings */
if (gadget_is_otg(c->cdev->gadget)) {
@@ -125,7 +118,19 @@ static int __init ncm_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- return ncm_bind_config(c, hostaddr, the_dev);
+ f_ncm = usb_get_function(f_ncm_inst);
+ if (IS_ERR(f_ncm)) {
+ status = PTR_ERR(f_ncm);
+ return status;
+ }
+
+ status = usb_add_function(c, f_ncm);
+ if (status < 0) {
+ usb_put_function(f_ncm);
+ return status;
+ }
+
+ return 0;
}
static struct usb_configuration ncm_config_driver = {
@@ -141,12 +146,20 @@ static struct usb_configuration ncm_config_driver = {
static int __init gncm_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
+ struct f_ncm_opts *ncm_opts;
int status;
- /* set up network link layer */
- the_dev = gether_setup(cdev->gadget, hostaddr);
- if (IS_ERR(the_dev))
- return PTR_ERR(the_dev);
+ f_ncm_inst = usb_get_function_instance("ncm");
+ if (IS_ERR(f_ncm_inst))
+ return PTR_ERR(f_ncm_inst);
+
+ ncm_opts = container_of(f_ncm_inst, struct f_ncm_opts, func_inst);
+
+ gether_set_qmult(ncm_opts->net, qmult);
+ if (!gether_set_host_addr(ncm_opts->net, host_addr))
+ pr_info("using host ethernet address: %s", host_addr);
+ if (!gether_set_dev_addr(ncm_opts->net, dev_addr))
+ pr_info("using self ethernet address: %s", dev_addr);
/* Allocate string descriptor numbers ... note that string
* contents can be overridden by the composite_dev glue.
@@ -169,13 +182,16 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
return 0;
fail:
- gether_cleanup(the_dev);
+ usb_put_function_instance(f_ncm_inst);
return status;
}
static int __exit gncm_unbind(struct usb_composite_dev *cdev)
{
- gether_cleanup(the_dev);
+ if (!IS_ERR_OR_NULL(f_ncm))
+ usb_put_function(f_ncm);
+ if (!IS_ERR_OR_NULL(f_ncm_inst))
+ usb_put_function_instance(f_ncm_inst);
return 0;
}
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 3b344b41a16..0a8099a488c 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -16,11 +16,13 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
#include "u_serial.h"
#include "u_ether.h"
#include "u_phonet.h"
+#include "u_ecm.h"
#include "gadget_chips.h"
/* Defines */
@@ -28,24 +30,10 @@
#define NOKIA_VERSION_NUM 0x0211
#define NOKIA_LONG_NAME "N900 (PC-Suite Mode)"
-/*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module. So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#define USBF_OBEX_INCLUDED
-#include "f_ecm.c"
-#include "f_obex.c"
-#include "f_phonet.c"
-#include "u_ether.c"
-
-/*-------------------------------------------------------------------------*/
USB_GADGET_COMPOSITE_OPTIONS();
+USB_ETHERNET_MODULE_PARAMETERS();
+
#define NOKIA_VENDOR_ID 0x0421 /* Nokia */
#define NOKIA_PRODUCT_ID 0x01c8 /* Nokia Gadget */
@@ -98,16 +86,15 @@ MODULE_LICENSE("GPL");
/*-------------------------------------------------------------------------*/
static struct usb_function *f_acm_cfg1;
static struct usb_function *f_acm_cfg2;
-static u8 hostaddr[ETH_ALEN];
-static struct eth_dev *the_dev;
-
-enum {
- TTY_PORT_OBEX0,
- TTY_PORT_OBEX1,
- TTY_PORTS_MAX,
-};
+static struct usb_function *f_ecm_cfg1;
+static struct usb_function *f_ecm_cfg2;
+static struct usb_function *f_obex1_cfg1;
+static struct usb_function *f_obex2_cfg1;
+static struct usb_function *f_obex1_cfg2;
+static struct usb_function *f_obex2_cfg2;
+static struct usb_function *f_phonet_cfg1;
+static struct usb_function *f_phonet_cfg2;
-static unsigned char tty_lines[TTY_PORTS_MAX];
static struct usb_configuration nokia_config_500ma_driver = {
.label = "Bus Powered",
@@ -126,47 +113,114 @@ static struct usb_configuration nokia_config_100ma_driver = {
};
static struct usb_function_instance *fi_acm;
+static struct usb_function_instance *fi_ecm;
+static struct usb_function_instance *fi_obex1;
+static struct usb_function_instance *fi_obex2;
+static struct usb_function_instance *fi_phonet;
static int __init nokia_bind_config(struct usb_configuration *c)
{
struct usb_function *f_acm;
+ struct usb_function *f_phonet = NULL;
+ struct usb_function *f_obex1 = NULL;
+ struct usb_function *f_ecm;
+ struct usb_function *f_obex2 = NULL;
int status = 0;
+ int obex1_stat = 0;
+ int obex2_stat = 0;
+ int phonet_stat = 0;
+
+ if (!IS_ERR(fi_phonet)) {
+ f_phonet = usb_get_function(fi_phonet);
+ if (IS_ERR(f_phonet))
+ pr_debug("could not get phonet function\n");
+ }
- status = phonet_bind_config(c);
- if (status)
- printk(KERN_DEBUG "could not bind phonet config\n");
-
- status = obex_bind_config(c, tty_lines[TTY_PORT_OBEX0]);
- if (status)
- printk(KERN_DEBUG "could not bind obex config %d\n", 0);
+ if (!IS_ERR(fi_obex1)) {
+ f_obex1 = usb_get_function(fi_obex1);
+ if (IS_ERR(f_obex1))
+ pr_debug("could not get obex function 0\n");
+ }
- status = obex_bind_config(c, tty_lines[TTY_PORT_OBEX1]);
- if (status)
- printk(KERN_DEBUG "could not bind obex config %d\n", 0);
+ if (!IS_ERR(fi_obex2)) {
+ f_obex2 = usb_get_function(fi_obex2);
+ if (IS_ERR(f_obex2))
+ pr_debug("could not get obex function 1\n");
+ }
f_acm = usb_get_function(fi_acm);
- if (IS_ERR(f_acm))
- return PTR_ERR(f_acm);
+ if (IS_ERR(f_acm)) {
+ status = PTR_ERR(f_acm);
+ goto err_get_acm;
+ }
+
+ f_ecm = usb_get_function(fi_ecm);
+ if (IS_ERR(f_ecm)) {
+ status = PTR_ERR(f_ecm);
+ goto err_get_ecm;
+ }
+
+ if (!IS_ERR_OR_NULL(f_phonet)) {
+ phonet_stat = usb_add_function(c, f_phonet);
+ if (phonet_stat)
+ pr_debug("could not add phonet function\n");
+ }
+
+ if (!IS_ERR_OR_NULL(f_obex1)) {
+ obex1_stat = usb_add_function(c, f_obex1);
+ if (obex1_stat)
+ pr_debug("could not add obex function 0\n");
+ }
+
+ if (!IS_ERR_OR_NULL(f_obex2)) {
+ obex2_stat = usb_add_function(c, f_obex2);
+ if (obex2_stat)
+ pr_debug("could not add obex function 1\n");
+ }
status = usb_add_function(c, f_acm);
if (status)
goto err_conf;
- status = ecm_bind_config(c, hostaddr, the_dev);
+ status = usb_add_function(c, f_ecm);
if (status) {
pr_debug("could not bind ecm config %d\n", status);
goto err_ecm;
}
- if (c == &nokia_config_500ma_driver)
+ if (c == &nokia_config_500ma_driver) {
f_acm_cfg1 = f_acm;
- else
+ f_ecm_cfg1 = f_ecm;
+ f_phonet_cfg1 = f_phonet;
+ f_obex1_cfg1 = f_obex1;
+ f_obex2_cfg1 = f_obex2;
+ } else {
f_acm_cfg2 = f_acm;
+ f_ecm_cfg2 = f_ecm;
+ f_phonet_cfg2 = f_phonet;
+ f_obex1_cfg2 = f_obex1;
+ f_obex2_cfg2 = f_obex2;
+ }
return status;
err_ecm:
usb_remove_function(c, f_acm);
err_conf:
+ if (!obex2_stat)
+ usb_remove_function(c, f_obex2);
+ if (!obex1_stat)
+ usb_remove_function(c, f_obex1);
+ if (!phonet_stat)
+ usb_remove_function(c, f_phonet);
+ usb_put_function(f_ecm);
+err_get_ecm:
usb_put_function(f_acm);
+err_get_acm:
+ if (!IS_ERR_OR_NULL(f_obex2))
+ usb_put_function(f_obex2);
+ if (!IS_ERR_OR_NULL(f_obex1))
+ usb_put_function(f_obex1);
+ if (!IS_ERR_OR_NULL(f_phonet))
+ usb_put_function(f_phonet);
return status;
}
@@ -174,23 +228,6 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status;
- int cur_line;
-
- status = gphonet_setup(cdev->gadget);
- if (status < 0)
- goto err_phonet;
-
- for (cur_line = 0; cur_line < TTY_PORTS_MAX; cur_line++) {
- status = gserial_alloc_line(&tty_lines[cur_line]);
- if (status)
- goto err_ether;
- }
-
- the_dev = gether_setup(cdev->gadget, hostaddr);
- if (IS_ERR(the_dev)) {
- status = PTR_ERR(the_dev);
- goto err_ether;
- }
status = usb_string_ids_tab(cdev, strings_dev);
if (status < 0)
@@ -201,18 +238,40 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
nokia_config_500ma_driver.iConfiguration = status;
nokia_config_100ma_driver.iConfiguration = status;
- if (!gadget_supports_altsettings(gadget))
+ if (!gadget_supports_altsettings(gadget)) {
+ status = -ENODEV;
goto err_usb;
+ }
+
+ fi_phonet = usb_get_function_instance("phonet");
+ if (IS_ERR(fi_phonet))
+ pr_debug("could not find phonet function\n");
+
+ fi_obex1 = usb_get_function_instance("obex");
+ if (IS_ERR(fi_obex1))
+ pr_debug("could not find obex function 1\n");
+
+ fi_obex2 = usb_get_function_instance("obex");
+ if (IS_ERR(fi_obex2))
+ pr_debug("could not find obex function 2\n");
fi_acm = usb_get_function_instance("acm");
- if (IS_ERR(fi_acm))
- goto err_usb;
+ if (IS_ERR(fi_acm)) {
+ status = PTR_ERR(fi_acm);
+ goto err_obex2_inst;
+ }
+
+ fi_ecm = usb_get_function_instance("ecm");
+ if (IS_ERR(fi_ecm)) {
+ status = PTR_ERR(fi_ecm);
+ goto err_acm_inst;
+ }
/* finally register the configuration */
status = usb_add_config(cdev, &nokia_config_500ma_driver,
nokia_bind_config);
if (status < 0)
- goto err_acm_inst;
+ goto err_ecm_inst;
status = usb_add_config(cdev, &nokia_config_100ma_driver,
nokia_bind_config);
@@ -226,33 +285,55 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
err_put_cfg1:
usb_put_function(f_acm_cfg1);
+ if (!IS_ERR_OR_NULL(f_obex1_cfg1))
+ usb_put_function(f_obex1_cfg1);
+ if (!IS_ERR_OR_NULL(f_obex2_cfg1))
+ usb_put_function(f_obex2_cfg1);
+ if (!IS_ERR_OR_NULL(f_phonet_cfg1))
+ usb_put_function(f_phonet_cfg1);
+ usb_put_function(f_ecm_cfg1);
+err_ecm_inst:
+ usb_put_function_instance(fi_ecm);
err_acm_inst:
usb_put_function_instance(fi_acm);
+err_obex2_inst:
+ if (!IS_ERR(fi_obex2))
+ usb_put_function_instance(fi_obex2);
+ if (!IS_ERR(fi_obex1))
+ usb_put_function_instance(fi_obex1);
+ if (!IS_ERR(fi_phonet))
+ usb_put_function_instance(fi_phonet);
err_usb:
- gether_cleanup(the_dev);
-err_ether:
- cur_line--;
- while (cur_line >= 0)
- gserial_free_line(tty_lines[cur_line--]);
-
- gphonet_cleanup();
-err_phonet:
return status;
}
static int __exit nokia_unbind(struct usb_composite_dev *cdev)
{
- int i;
-
+ if (!IS_ERR_OR_NULL(f_obex1_cfg2))
+ usb_put_function(f_obex1_cfg2);
+ if (!IS_ERR_OR_NULL(f_obex2_cfg2))
+ usb_put_function(f_obex2_cfg2);
+ if (!IS_ERR_OR_NULL(f_obex1_cfg1))
+ usb_put_function(f_obex1_cfg1);
+ if (!IS_ERR_OR_NULL(f_obex2_cfg1))
+ usb_put_function(f_obex2_cfg1);
+ if (!IS_ERR_OR_NULL(f_phonet_cfg1))
+ usb_put_function(f_phonet_cfg1);
+ if (!IS_ERR_OR_NULL(f_phonet_cfg2))
+ usb_put_function(f_phonet_cfg2);
usb_put_function(f_acm_cfg1);
usb_put_function(f_acm_cfg2);
+ usb_put_function(f_ecm_cfg1);
+ usb_put_function(f_ecm_cfg2);
+
+ usb_put_function_instance(fi_ecm);
+ if (!IS_ERR(fi_obex2))
+ usb_put_function_instance(fi_obex2);
+ if (!IS_ERR(fi_obex1))
+ usb_put_function_instance(fi_obex1);
+ if (!IS_ERR(fi_phonet))
+ usb_put_function_instance(fi_phonet);
usb_put_function_instance(fi_acm);
- gphonet_cleanup();
-
- for (i = 0; i < TTY_PORTS_MAX; i++)
- gserial_free_line(tty_lines[i]);
-
- gether_cleanup(the_dev);
return 0;
}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 6b4c7d95853..41cea9566ac 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2505,7 +2505,6 @@ static int pxa_udc_remove(struct platform_device *_dev)
usb_put_phy(udc->transceiver);
udc->transceiver = NULL;
- platform_set_drvdata(_dev, NULL);
the_controller = NULL;
clk_put(udc->clk);
iounmap(udc->regs);
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 7ff7d9cf206..c6af649f324 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1469,11 +1469,11 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
u16 savepipe;
u16 mask0;
+ spin_lock(&r8a66597->lock);
+
if (r8a66597_is_sudmac(r8a66597))
r8a66597_sudmac_irq(r8a66597);
- spin_lock(&r8a66597->lock);
-
intsts0 = r8a66597_read(r8a66597, INTSTS0);
intenb0 = r8a66597_read(r8a66597, INTENB0);
@@ -1822,7 +1822,7 @@ static const struct usb_gadget_ops r8a66597_gadget_ops = {
static int __exit r8a66597_remove(struct platform_device *pdev)
{
- struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev);
+ struct r8a66597 *r8a66597 = platform_get_drvdata(pdev);
usb_del_gadget_udc(&r8a66597->gadget);
del_timer_sync(&r8a66597->timer);
@@ -1909,7 +1909,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
}
spin_lock_init(&r8a66597->lock);
- dev_set_drvdata(&pdev->dev, r8a66597);
+ platform_set_drvdata(pdev, r8a66597);
r8a66597->pdata = pdev->dev.platform_data;
r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 1e4cfb05f70..3e3ea720303 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -761,6 +761,7 @@ int rndis_signal_connect(int configNr)
return rndis_indicate_status_msg(configNr,
RNDIS_STATUS_MEDIA_CONNECT);
}
+EXPORT_SYMBOL(rndis_signal_connect);
int rndis_signal_disconnect(int configNr)
{
@@ -769,6 +770,7 @@ int rndis_signal_disconnect(int configNr)
return rndis_indicate_status_msg(configNr,
RNDIS_STATUS_MEDIA_DISCONNECT);
}
+EXPORT_SYMBOL(rndis_signal_disconnect);
void rndis_uninit(int configNr)
{
@@ -783,11 +785,13 @@ void rndis_uninit(int configNr)
while ((buf = rndis_get_next_response(configNr, &length)))
rndis_free_response(configNr, buf);
}
+EXPORT_SYMBOL(rndis_uninit);
void rndis_set_host_mac(int configNr, const u8 *addr)
{
rndis_per_dev_params[configNr].host_mac = addr;
}
+EXPORT_SYMBOL(rndis_set_host_mac);
/*
* Message Parser
@@ -870,6 +874,7 @@ int rndis_msg_parser(u8 configNr, u8 *buf)
return -ENOTSUPP;
}
+EXPORT_SYMBOL(rndis_msg_parser);
int rndis_register(void (*resp_avail)(void *v), void *v)
{
@@ -891,6 +896,7 @@ int rndis_register(void (*resp_avail)(void *v), void *v)
return -ENODEV;
}
+EXPORT_SYMBOL(rndis_register);
void rndis_deregister(int configNr)
{
@@ -899,6 +905,7 @@ void rndis_deregister(int configNr)
if (configNr >= RNDIS_MAX_CONFIGS) return;
rndis_per_dev_params[configNr].used = 0;
}
+EXPORT_SYMBOL(rndis_deregister);
int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter)
{
@@ -912,6 +919,7 @@ int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter)
return 0;
}
+EXPORT_SYMBOL(rndis_set_param_dev);
int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr)
{
@@ -924,6 +932,7 @@ int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr)
return 0;
}
+EXPORT_SYMBOL(rndis_set_param_vendor);
int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed)
{
@@ -935,6 +944,7 @@ int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed)
return 0;
}
+EXPORT_SYMBOL(rndis_set_param_medium);
void rndis_add_hdr(struct sk_buff *skb)
{
@@ -949,6 +959,7 @@ void rndis_add_hdr(struct sk_buff *skb)
header->DataOffset = cpu_to_le32(36);
header->DataLength = cpu_to_le32(skb->len - sizeof(*header));
}
+EXPORT_SYMBOL(rndis_add_hdr);
void rndis_free_response(int configNr, u8 *buf)
{
@@ -965,6 +976,7 @@ void rndis_free_response(int configNr, u8 *buf)
}
}
}
+EXPORT_SYMBOL(rndis_free_response);
u8 *rndis_get_next_response(int configNr, u32 *length)
{
@@ -986,6 +998,7 @@ u8 *rndis_get_next_response(int configNr, u32 *length)
return NULL;
}
+EXPORT_SYMBOL(rndis_get_next_response);
static rndis_resp_t *rndis_add_response(int configNr, u32 length)
{
@@ -1029,6 +1042,7 @@ int rndis_rm_hdr(struct gether *port,
skb_queue_tail(list, skb);
return 0;
}
+EXPORT_SYMBOL(rndis_rm_hdr);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
@@ -1160,6 +1174,7 @@ int rndis_init(void)
return 0;
}
+module_init(rndis_init);
void rndis_exit(void)
{
@@ -1173,3 +1188,6 @@ void rndis_exit(void)
}
#endif
}
+module_exit(rndis_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index 0647f2f34e8..0f4abb4c377 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -16,6 +16,7 @@
#define _LINUX_RNDIS_H
#include <linux/rndis.h>
+#include "u_ether.h"
#include "ndis.h"
#define RNDIS_MAXIMUM_FRAME_SIZE 1518
@@ -216,7 +217,4 @@ int rndis_signal_disconnect (int configNr);
int rndis_state (int configNr);
extern void rndis_set_host_mac (int configNr, const u8 *addr);
-int rndis_init(void);
-void rndis_exit (void);
-
#endif /* _LINUX_RNDIS_H */
diff --git a/drivers/usb/gadget/u_ecm.h b/drivers/usb/gadget/u_ecm.h
new file mode 100644
index 00000000000..262cc03cc2c
--- /dev/null
+++ b/drivers/usb/gadget/u_ecm.h
@@ -0,0 +1,36 @@
+/*
+ * u_ecm.h
+ *
+ * Utility definitions for the ecm function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_ECM_H
+#define U_ECM_H
+
+#include <linux/usb/composite.h>
+
+struct f_ecm_opts {
+ struct usb_function_instance func_inst;
+ struct net_device *net;
+ bool bound;
+
+ /*
+ * Read/write access to configfs attributes is handled by configfs.
+ *
+ * This is to protect the data from concurrent access by read/write
+ * and create symlink/remove symlink.
+ */
+ struct mutex lock;
+ int refcnt;
+};
+
+#endif /* U_ECM_H */
diff --git a/drivers/usb/gadget/u_eem.h b/drivers/usb/gadget/u_eem.h
new file mode 100644
index 00000000000..e3ae97874c4
--- /dev/null
+++ b/drivers/usb/gadget/u_eem.h
@@ -0,0 +1,36 @@
+/*
+ * u_eem.h
+ *
+ * Utility definitions for the eem function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_EEM_H
+#define U_EEM_H
+
+#include <linux/usb/composite.h>
+
+struct f_eem_opts {
+ struct usb_function_instance func_inst;
+ struct net_device *net;
+ bool bound;
+
+ /*
+ * Read/write access to configfs attributes is handled by configfs.
+ *
+ * This is to protect the data from concurrent access by read/write
+ * and create symlink/remove symlink.
+ */
+ struct mutex lock;
+ int refcnt;
+};
+
+#endif /* U_EEM_H */
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 4b76124ce96..2aae0d61bb1 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -63,6 +63,8 @@ struct eth_dev {
struct sk_buff_head rx_frames;
+ unsigned qmult;
+
unsigned header_len;
struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb);
int (*unwrap)(struct gether *,
@@ -76,6 +78,7 @@ struct eth_dev {
bool zlp;
u8 host_mac[ETH_ALEN];
+ u8 dev_mac[ETH_ALEN];
};
/*-------------------------------------------------------------------------*/
@@ -84,12 +87,8 @@ struct eth_dev {
#define DEFAULT_QLEN 2 /* double buffering by default */
-static unsigned qmult = 5;
-module_param(qmult, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
-
/* for dual-speed hardware, use deeper queues at high/super speed */
-static inline int qlen(struct usb_gadget *gadget)
+static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
{
if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
gadget->speed == USB_SPEED_SUPER))
@@ -588,7 +587,7 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
if (gadget_is_dualspeed(dev->gadget))
req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
dev->gadget->speed == USB_SPEED_SUPER)
- ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+ ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0)
: 0;
retval = usb_ep_queue(in, req, GFP_ATOMIC);
@@ -697,16 +696,6 @@ static int eth_stop(struct net_device *net)
/*-------------------------------------------------------------------------*/
-/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
-static char *dev_addr;
-module_param(dev_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
-
-/* this address is invisible to ifconfig */
-static char *host_addr;
-module_param(host_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
-
static int get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
@@ -728,6 +717,17 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
return 1;
}
+static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len)
+{
+ if (len < 18)
+ return -EINVAL;
+
+ snprintf(str, len, "%02x:%02x:%02x:%02x:%02x:%02x",
+ dev_addr[0], dev_addr[1], dev_addr[2],
+ dev_addr[3], dev_addr[4], dev_addr[5]);
+ return 18;
+}
+
static const struct net_device_ops eth_netdev_ops = {
.ndo_open = eth_open,
.ndo_stop = eth_stop,
@@ -755,8 +755,9 @@ static struct device_type gadget_type = {
*
* Returns negative errno, or zero on success
*/
-struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
- const char *netname)
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+ const char *dev_addr, const char *host_addr,
+ u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname)
{
struct eth_dev *dev;
struct net_device *net;
@@ -777,6 +778,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
/* network device setup */
dev->net = net;
+ dev->qmult = qmult;
snprintf(net->name, sizeof(net->name), "%s%%d", netname);
if (get_ether_addr(dev_addr, net->dev_addr))
@@ -806,7 +808,8 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
INFO(dev, "MAC %pM\n", net->dev_addr);
INFO(dev, "HOST MAC %pM\n", dev->host_mac);
- /* two kinds of host-initiated state changes:
+ /*
+ * two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
* - tx queueing enabled if open *and* carrier is "on"
*/
@@ -815,6 +818,186 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
return dev;
}
+EXPORT_SYMBOL(gether_setup_name);
+
+struct net_device *gether_setup_name_default(const char *netname)
+{
+ struct net_device *net;
+ struct eth_dev *dev;
+
+ net = alloc_etherdev(sizeof(*dev));
+ if (!net)
+ return ERR_PTR(-ENOMEM);
+
+ dev = netdev_priv(net);
+ spin_lock_init(&dev->lock);
+ spin_lock_init(&dev->req_lock);
+ INIT_WORK(&dev->work, eth_work);
+ INIT_LIST_HEAD(&dev->tx_reqs);
+ INIT_LIST_HEAD(&dev->rx_reqs);
+
+ skb_queue_head_init(&dev->rx_frames);
+
+ /* network device setup */
+ dev->net = net;
+ dev->qmult = QMULT_DEFAULT;
+ snprintf(net->name, sizeof(net->name), "%s%%d", netname);
+
+ eth_random_addr(dev->dev_mac);
+ pr_warn("using random %s ethernet address\n", "self");
+ eth_random_addr(dev->host_mac);
+ pr_warn("using random %s ethernet address\n", "host");
+
+ net->netdev_ops = &eth_netdev_ops;
+
+ SET_ETHTOOL_OPS(net, &ops);
+ SET_NETDEV_DEVTYPE(net, &gadget_type);
+
+ return net;
+}
+EXPORT_SYMBOL(gether_setup_name_default);
+
+int gether_register_netdev(struct net_device *net)
+{
+ struct eth_dev *dev;
+ struct usb_gadget *g;
+ struct sockaddr sa;
+ int status;
+
+ if (!net->dev.parent)
+ return -EINVAL;
+ dev = netdev_priv(net);
+ g = dev->gadget;
+ status = register_netdev(net);
+ if (status < 0) {
+ dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
+ return status;
+ } else {
+ INFO(dev, "HOST MAC %pM\n", dev->host_mac);
+
+ /* two kinds of host-initiated state changes:
+ * - iff DATA transfer is active, carrier is "on"
+ * - tx queueing enabled if open *and* carrier is "on"
+ */
+ netif_carrier_off(net);
+ }
+ sa.sa_family = net->type;
+ memcpy(sa.sa_data, dev->dev_mac, ETH_ALEN);
+ rtnl_lock();
+ status = dev_set_mac_address(net, &sa);
+ rtnl_unlock();
+ if (status)
+ pr_warn("cannot set self ethernet address: %d\n", status);
+ else
+ INFO(dev, "MAC %pM\n", dev->dev_mac);
+
+ return status;
+}
+EXPORT_SYMBOL(gether_register_netdev);
+
+void gether_set_gadget(struct net_device *net, struct usb_gadget *g)
+{
+ struct eth_dev *dev;
+
+ dev = netdev_priv(net);
+ dev->gadget = g;
+ SET_NETDEV_DEV(net, &g->dev);
+}
+EXPORT_SYMBOL(gether_set_gadget);
+
+int gether_set_dev_addr(struct net_device *net, const char *dev_addr)
+{
+ struct eth_dev *dev;
+ u8 new_addr[ETH_ALEN];
+
+ dev = netdev_priv(net);
+ if (get_ether_addr(dev_addr, new_addr))
+ return -EINVAL;
+ memcpy(dev->dev_mac, new_addr, ETH_ALEN);
+ return 0;
+}
+EXPORT_SYMBOL(gether_set_dev_addr);
+
+int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len)
+{
+ struct eth_dev *dev;
+
+ dev = netdev_priv(net);
+ return get_ether_addr_str(dev->dev_mac, dev_addr, len);
+}
+EXPORT_SYMBOL(gether_get_dev_addr);
+
+int gether_set_host_addr(struct net_device *net, const char *host_addr)
+{
+ struct eth_dev *dev;
+ u8 new_addr[ETH_ALEN];
+
+ dev = netdev_priv(net);
+ if (get_ether_addr(host_addr, new_addr))
+ return -EINVAL;
+ memcpy(dev->host_mac, new_addr, ETH_ALEN);
+ return 0;
+}
+EXPORT_SYMBOL(gether_set_host_addr);
+
+int gether_get_host_addr(struct net_device *net, char *host_addr, int len)
+{
+ struct eth_dev *dev;
+
+ dev = netdev_priv(net);
+ return get_ether_addr_str(dev->host_mac, host_addr, len);
+}
+EXPORT_SYMBOL(gether_get_host_addr);
+
+int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len)
+{
+ struct eth_dev *dev;
+
+ if (len < 13)
+ return -EINVAL;
+
+ dev = netdev_priv(net);
+ snprintf(host_addr, len, "%pm", dev->host_mac);
+
+ return strlen(host_addr);
+}
+EXPORT_SYMBOL(gether_get_host_addr_cdc);
+
+void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN])
+{
+ struct eth_dev *dev;
+
+ dev = netdev_priv(net);
+ memcpy(host_mac, dev->host_mac, ETH_ALEN);
+}
+EXPORT_SYMBOL(gether_get_host_addr_u8);
+
+void gether_set_qmult(struct net_device *net, unsigned qmult)
+{
+ struct eth_dev *dev;
+
+ dev = netdev_priv(net);
+ dev->qmult = qmult;
+}
+EXPORT_SYMBOL(gether_set_qmult);
+
+unsigned gether_get_qmult(struct net_device *net)
+{
+ struct eth_dev *dev;
+
+ dev = netdev_priv(net);
+ return dev->qmult;
+}
+EXPORT_SYMBOL(gether_get_qmult);
+
+int gether_get_ifname(struct net_device *net, char *name, int len)
+{
+ rtnl_lock();
+ strlcpy(name, netdev_name(net), len);
+ rtnl_unlock();
+ return strlen(name);
+}
+EXPORT_SYMBOL(gether_get_ifname);
/**
* gether_cleanup - remove Ethernet-over-USB device
@@ -831,6 +1014,7 @@ void gether_cleanup(struct eth_dev *dev)
flush_work(&dev->work);
free_netdev(dev->net);
}
+EXPORT_SYMBOL(gether_cleanup);
/**
* gether_connect - notify network layer that USB link is active
@@ -873,11 +1057,12 @@ struct net_device *gether_connect(struct gether *link)
}
if (result == 0)
- result = alloc_requests(dev, link, qlen(dev->gadget));
+ result = alloc_requests(dev, link, qlen(dev->gadget,
+ dev->qmult));
if (result == 0) {
dev->zlp = link->is_zlp_ok;
- DBG(dev, "qlen %d\n", qlen(dev->gadget));
+ DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult));
dev->header_len = link->header_len;
dev->unwrap = link->unwrap;
@@ -910,6 +1095,7 @@ fail0:
return ERR_PTR(result);
return dev->net;
}
+EXPORT_SYMBOL(gether_connect);
/**
* gether_disconnect - notify network layer that USB link is inactive
@@ -980,3 +1166,7 @@ void gether_disconnect(struct gether *link)
dev->port_usb = NULL;
spin_unlock(&dev->lock);
}
+EXPORT_SYMBOL(gether_disconnect);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 02522338a70..fb23d1fde8e 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -21,6 +21,26 @@
#include "gadget_chips.h"
+#define QMULT_DEFAULT 5
+
+/*
+ * dev_addr: initial value
+ * changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx"
+ * host_addr: this address is invisible to ifconfig
+ */
+#define USB_ETHERNET_MODULE_PARAMETERS() \
+ static unsigned qmult = QMULT_DEFAULT; \
+ module_param(qmult, uint, S_IRUGO|S_IWUSR); \
+ MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");\
+ \
+ static char *dev_addr; \
+ module_param(dev_addr, charp, S_IRUGO); \
+ MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); \
+ \
+ static char *host_addr; \
+ module_param(host_addr, charp, S_IRUGO); \
+ MODULE_PARM_DESC(host_addr, "Host Ethernet Address")
+
struct eth_dev;
/*
@@ -71,8 +91,9 @@ struct gether {
|USB_CDC_PACKET_TYPE_DIRECTED)
/* variant of gether_setup that allows customizing network device name */
-struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
- const char *netname);
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+ const char *dev_addr, const char *host_addr,
+ u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname);
/* netdev setup/teardown as directed by the gadget driver */
/* gether_setup - initialize one ethernet-over-usb link
@@ -88,11 +109,145 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
* Returns negative errno, or zero on success
*/
static inline struct eth_dev *gether_setup(struct usb_gadget *g,
- u8 ethaddr[ETH_ALEN])
+ const char *dev_addr, const char *host_addr,
+ u8 ethaddr[ETH_ALEN], unsigned qmult)
{
- return gether_setup_name(g, ethaddr, "usb");
+ return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb");
}
+/*
+ * variant of gether_setup_default that allows customizing
+ * network device name
+ */
+struct net_device *gether_setup_name_default(const char *netname);
+
+/*
+ * gether_register_netdev - register the net device
+ * @net: net device to register
+ *
+ * Registers the net device associated with this ethernet-over-usb link
+ *
+ */
+int gether_register_netdev(struct net_device *net);
+
+/* gether_setup_default - initialize one ethernet-over-usb link
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework. The link layer addresses
+ * are set to random values.
+ *
+ * Returns negative errno, or zero on success
+ */
+static inline struct net_device *gether_setup_default(void)
+{
+ return gether_setup_name_default("usb");
+}
+
+/**
+ * gether_set_gadget - initialize one ethernet-over-usb link with a gadget
+ * @net: device representing this link
+ * @g: the gadget to initialize with
+ *
+ * This associates one ethernet-over-usb link with a gadget.
+ */
+void gether_set_gadget(struct net_device *net, struct usb_gadget *g);
+
+/**
+ * gether_set_dev_addr - initialize an ethernet-over-usb link with eth address
+ * @net: device representing this link
+ * @dev_addr: eth address of this device
+ *
+ * This sets the device-side Ethernet address of this ethernet-over-usb link
+ * if dev_addr is correct.
+ * Returns negative errno if the new address is incorrect.
+ */
+int gether_set_dev_addr(struct net_device *net, const char *dev_addr);
+
+/**
+ * gether_get_dev_addr - get an ethernet-over-usb link eth address
+ * @net: device representing this link
+ * @dev_addr: place to store device's eth address
+ * @len: length of the @dev_addr buffer
+ *
+ * This gets the device-side Ethernet address of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len);
+
+/**
+ * gether_set_host_addr - initialize an ethernet-over-usb link with host address
+ * @net: device representing this link
+ * @host_addr: eth address of the host
+ *
+ * This sets the host-side Ethernet address of this ethernet-over-usb link
+ * if host_addr is correct.
+ * Returns negative errno if the new address is incorrect.
+ */
+int gether_set_host_addr(struct net_device *net, const char *host_addr);
+
+/**
+ * gether_get_host_addr - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_addr: place to store eth address of the host
+ * @len: length of the @host_addr buffer
+ *
+ * This gets the host-side Ethernet address of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_host_addr(struct net_device *net, char *host_addr, int len);
+
+/**
+ * gether_get_host_addr_cdc - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_addr: place to store eth address of the host
+ * @len: length of the @host_addr buffer
+ *
+ * This gets the CDC formatted host-side Ethernet address of this
+ * ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len);
+
+/**
+ * gether_get_host_addr_u8 - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_mac: place to store the eth address of the host
+ *
+ * This gets the binary formatted host-side Ethernet address of this
+ * ethernet-over-usb link.
+ */
+void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]);
+
+/**
+ * gether_set_qmult - initialize an ethernet-over-usb link with a multiplier
+ * @net: device representing this link
+ * @qmult: queue multiplier
+ *
+ * This sets the queue length multiplier of this ethernet-over-usb link.
+ * For higher speeds use longer queues.
+ */
+void gether_set_qmult(struct net_device *net, unsigned qmult);
+
+/**
+ * gether_get_qmult - get an ethernet-over-usb link multiplier
+ * @net: device representing this link
+ *
+ * This gets the queue length multiplier of this ethernet-over-usb link.
+ */
+unsigned gether_get_qmult(struct net_device *net);
+
+/**
+ * gether_get_ifname - get an ethernet-over-usb link interface name
+ * @net: device representing this link
+ * @name: place to store the interface name
+ * @len: length of the @name buffer
+ *
+ * This gets the interface name of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_ifname(struct net_device *net, char *name, int len);
+
void gether_cleanup(struct eth_dev *dev);
/* connect/disconnect is handled by individual functions */
@@ -117,9 +272,6 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
struct eth_dev *dev);
int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
struct eth_dev *dev);
-int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
- struct eth_dev *dev);
-int eem_bind_config(struct usb_configuration *c, struct eth_dev *dev);
#ifdef USB_ETH_RNDIS
diff --git a/drivers/usb/gadget/u_ether_configfs.h b/drivers/usb/gadget/u_ether_configfs.h
new file mode 100644
index 00000000000..bcbd30146cf
--- /dev/null
+++ b/drivers/usb/gadget/u_ether_configfs.h
@@ -0,0 +1,164 @@
+/*
+ * u_ether_configfs.h
+ *
+ * Utility definitions for configfs support in USB Ethernet functions
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __U_ETHER_CONFIGFS_H
+#define __U_ETHER_CONFIGFS_H
+
+#define USB_ETHERNET_CONFIGFS_ITEM(_f_) \
+ CONFIGFS_ATTR_STRUCT(f_##_f_##_opts); \
+ CONFIGFS_ATTR_OPS(f_##_f_##_opts); \
+ \
+ static void _f_##_attr_release(struct config_item *item) \
+ { \
+ struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item); \
+ \
+ usb_put_function_instance(&opts->func_inst); \
+ } \
+ \
+ static struct configfs_item_operations _f_##_item_ops = { \
+ .release = _f_##_attr_release, \
+ .show_attribute = f_##_f_##_opts_attr_show, \
+ .store_attribute = f_##_f_##_opts_attr_store, \
+ }
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(_f_) \
+ static ssize_t _f_##_opts_dev_addr_show(struct f_##_f_##_opts *opts, \
+ char *page) \
+ { \
+ int result; \
+ \
+ mutex_lock(&opts->lock); \
+ result = gether_get_dev_addr(opts->net, page, PAGE_SIZE); \
+ mutex_unlock(&opts->lock); \
+ \
+ return result; \
+ } \
+ \
+ static ssize_t _f_##_opts_dev_addr_store(struct f_##_f_##_opts *opts, \
+ const char *page, size_t len)\
+ { \
+ int ret; \
+ \
+ mutex_lock(&opts->lock); \
+ if (opts->refcnt) { \
+ mutex_unlock(&opts->lock); \
+ return -EBUSY; \
+ } \
+ \
+ ret = gether_set_dev_addr(opts->net, page); \
+ mutex_unlock(&opts->lock); \
+ if (!ret) \
+ ret = len; \
+ return ret; \
+ } \
+ \
+ static struct f_##_f_##_opts_attribute f_##_f_##_opts_dev_addr = \
+ __CONFIGFS_ATTR(dev_addr, S_IRUGO | S_IWUSR, \
+ _f_##_opts_dev_addr_show, \
+ _f_##_opts_dev_addr_store)
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(_f_) \
+ static ssize_t _f_##_opts_host_addr_show(struct f_##_f_##_opts *opts, \
+ char *page) \
+ { \
+ int result; \
+ \
+ mutex_lock(&opts->lock); \
+ result = gether_get_host_addr(opts->net, page, PAGE_SIZE); \
+ mutex_unlock(&opts->lock); \
+ \
+ return result; \
+ } \
+ \
+ static ssize_t _f_##_opts_host_addr_store(struct f_##_f_##_opts *opts, \
+ const char *page, size_t len)\
+ { \
+ int ret; \
+ \
+ mutex_lock(&opts->lock); \
+ if (opts->refcnt) { \
+ mutex_unlock(&opts->lock); \
+ return -EBUSY; \
+ } \
+ \
+ ret = gether_set_host_addr(opts->net, page); \
+ mutex_unlock(&opts->lock); \
+ if (!ret) \
+ ret = len; \
+ return ret; \
+ } \
+ \
+ static struct f_##_f_##_opts_attribute f_##_f_##_opts_host_addr = \
+ __CONFIGFS_ATTR(host_addr, S_IRUGO | S_IWUSR, \
+ _f_##_opts_host_addr_show, \
+ _f_##_opts_host_addr_store)
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(_f_) \
+ static ssize_t _f_##_opts_qmult_show(struct f_##_f_##_opts *opts, \
+ char *page) \
+ { \
+ unsigned qmult; \
+ \
+ mutex_lock(&opts->lock); \
+ qmult = gether_get_qmult(opts->net); \
+ mutex_unlock(&opts->lock); \
+ return sprintf(page, "%d", qmult); \
+ } \
+ \
+ static ssize_t _f_##_opts_qmult_store(struct f_##_f_##_opts *opts, \
+ const char *page, size_t len)\
+ { \
+ u8 val; \
+ int ret; \
+ \
+ mutex_lock(&opts->lock); \
+ if (opts->refcnt) { \
+ ret = -EBUSY; \
+ goto out; \
+ } \
+ \
+ ret = kstrtou8(page, 0, &val); \
+ if (ret) \
+ goto out; \
+ \
+ gether_set_qmult(opts->net, val); \
+ ret = len; \
+out: \
+ mutex_unlock(&opts->lock); \
+ return ret; \
+ } \
+ \
+ static struct f_##_f_##_opts_attribute f_##_f_##_opts_qmult = \
+ __CONFIGFS_ATTR(qmult, S_IRUGO | S_IWUSR, \
+ _f_##_opts_qmult_show, \
+ _f_##_opts_qmult_store)
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(_f_) \
+ static ssize_t _f_##_opts_ifname_show(struct f_##_f_##_opts *opts, \
+ char *page) \
+ { \
+ int ret; \
+ \
+ mutex_lock(&opts->lock); \
+ ret = gether_get_ifname(opts->net, page, PAGE_SIZE); \
+ mutex_unlock(&opts->lock); \
+ \
+ return ret; \
+ } \
+ \
+ static struct f_##_f_##_opts_attribute f_##_f_##_opts_ifname = \
+ __CONFIGFS_ATTR_RO(ifname, _f_##_opts_ifname_show)
+
+#endif /* __U_ETHER_CONFIGFS_H */
diff --git a/drivers/usb/gadget/u_gether.h b/drivers/usb/gadget/u_gether.h
new file mode 100644
index 00000000000..d4078426ba5
--- /dev/null
+++ b/drivers/usb/gadget/u_gether.h
@@ -0,0 +1,36 @@
+/*
+ * u_gether.h
+ *
+ * Utility definitions for the subset function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_GETHER_H
+#define U_GETHER_H
+
+#include <linux/usb/composite.h>
+
+struct f_gether_opts {
+ struct usb_function_instance func_inst;
+ struct net_device *net;
+ bool bound;
+
+ /*
+ * Read/write access to configfs attributes is handled by configfs.
+ *
+ * This is to protect the data from concurrent access by read/write
+ * and create symlink/remove symlink.
+ */
+ struct mutex lock;
+ int refcnt;
+};
+
+#endif /* U_GETHER_H */
diff --git a/drivers/usb/gadget/u_ncm.h b/drivers/usb/gadget/u_ncm.h
new file mode 100644
index 00000000000..ce0f3a78ca1
--- /dev/null
+++ b/drivers/usb/gadget/u_ncm.h
@@ -0,0 +1,36 @@
+/*
+ * u_ncm.h
+ *
+ * Utility definitions for the ncm function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_NCM_H
+#define U_NCM_H
+
+#include <linux/usb/composite.h>
+
+struct f_ncm_opts {
+ struct usb_function_instance func_inst;
+ struct net_device *net;
+ bool bound;
+
+ /*
+ * Read/write access to configfs attributes is handled by configfs.
+ *
+ * This is to protect the data from concurrent access by read/write
+ * and create symlink/remove symlink.
+ */
+ struct mutex lock;
+ int refcnt;
+};
+
+#endif /* U_NCM_H */
diff --git a/drivers/usb/gadget/u_phonet.h b/drivers/usb/gadget/u_phonet.h
index 09a75259b6c..98ced18779e 100644
--- a/drivers/usb/gadget/u_phonet.h
+++ b/drivers/usb/gadget/u_phonet.h
@@ -14,8 +14,16 @@
#include <linux/usb/composite.h>
#include <linux/usb/cdc.h>
-int gphonet_setup(struct usb_gadget *gadget);
-int phonet_bind_config(struct usb_configuration *c);
-void gphonet_cleanup(void);
+struct f_phonet_opts {
+ struct usb_function_instance func_inst;
+ bool bound;
+ struct net_device *net;
+};
+
+struct net_device *gphonet_setup_default(void);
+void gphonet_set_gadget(struct net_device *net, struct usb_gadget *g);
+int gphonet_register_netdev(struct net_device *net);
+int phonet_bind_config(struct usb_configuration *c, struct net_device *dev);
+void gphonet_cleanup(struct net_device *dev);
#endif /* __U_PHONET_H */
diff --git a/drivers/usb/gadget/u_rndis.h b/drivers/usb/gadget/u_rndis.h
new file mode 100644
index 00000000000..c62ba82e960
--- /dev/null
+++ b/drivers/usb/gadget/u_rndis.h
@@ -0,0 +1,41 @@
+/*
+ * u_rndis.h
+ *
+ * Utility definitions for the subset function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_RNDIS_H
+#define U_RNDIS_H
+
+#include <linux/usb/composite.h>
+
+struct f_rndis_opts {
+ struct usb_function_instance func_inst;
+ u32 vendor_id;
+ const char *manufacturer;
+ struct net_device *net;
+ bool bound;
+ bool borrowed_net;
+
+ /*
+ * Read/write access to configfs attributes is handled by configfs.
+ *
+ * This is to protect the data from concurrent access by read/write
+ * and create symlink/remove symlink.
+ */
+ struct mutex lock;
+ int refcnt;
+};
+
+void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net);
+
+#endif /* U_RNDIS_H */
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index 7ce27e35550..e6170478ea9 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -103,10 +103,26 @@ static void uvc_buffer_queue(struct vb2_buffer *vb)
spin_unlock_irqrestore(&queue->irqlock, flags);
}
+static void uvc_wait_prepare(struct vb2_queue *vq)
+{
+ struct uvc_video_queue *queue = vb2_get_drv_priv(vq);
+
+ mutex_unlock(&queue->mutex);
+}
+
+static void uvc_wait_finish(struct vb2_queue *vq)
+{
+ struct uvc_video_queue *queue = vb2_get_drv_priv(vq);
+
+ mutex_lock(&queue->mutex);
+}
+
static struct vb2_ops uvc_queue_qops = {
.queue_setup = uvc_queue_setup,
.buf_prepare = uvc_buffer_prepare,
.buf_queue = uvc_buffer_queue,
+ .wait_prepare = uvc_wait_prepare,
+ .wait_finish = uvc_wait_finish,
};
static int uvc_queue_init(struct uvc_video_queue *queue,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 344d5e2f87d..7d0aa5f58f7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -17,7 +17,6 @@ config USB_C67X00_HCD
config USB_XHCI_HCD
tristate "xHCI HCD (USB 3.0) support"
- depends on USB_ARCH_HAS_XHCI
---help---
The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
"SuperSpeed" host controller hardware.
@@ -43,7 +42,6 @@ endif # USB_XHCI_HCD
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
- depends on USB_ARCH_HAS_EHCI
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -200,7 +198,7 @@ config USB_EHCI_MSM
has an external PHY.
config USB_EHCI_TEGRA
- boolean "NVIDIA Tegra HCD support"
+ tristate "NVIDIA Tegra HCD support"
depends on ARCH_TEGRA
select USB_EHCI_ROOT_HUB_TT
select USB_PHY
@@ -345,9 +343,19 @@ config USB_ISP1362_HCD
To compile this driver as a module, choose M here: the
module will be called isp1362-hcd.
+config USB_FUSBH200_HCD
+ tristate "FUSBH200 HCD support"
+ depends on USB
+ default N
+ ---help---
+ Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
+ with minor modification.
+
+ To compile this driver as a module, choose M here: the
+ module will be called fusbh200-hcd.
+
config USB_OHCI_HCD
- tristate "OHCI HCD support"
- depends on USB_ARCH_HAS_OHCI
+ tristate "OHCI HCD (USB 1.1) support"
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
depends on USB_ISP1301 || !ARCH_LPC32XX
---help---
@@ -415,8 +423,8 @@ config USB_OHCI_HCD_PPC_OF
default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
- bool "OHCI support for PCI-bus USB controllers"
- depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
+ tristate "OHCI support for PCI-bus USB controllers"
+ depends on PCI
default y
select USB_OHCI_LITTLE_ENDIAN
---help---
@@ -470,7 +478,7 @@ config USB_CNS3XXX_OHCI
It is needed for low-speed USB 1.0 device support.
config USB_OHCI_HCD_PLATFORM
- bool "Generic OHCI driver for a platform device"
+ tristate "Generic OHCI driver for a platform device"
default n
---help---
Adds an OHCI host driver for a generic platform device, which
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 4fb73c156d7..bea71127b15 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -33,11 +33,16 @@ obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
+obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
+
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
+obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o
+obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
+
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
@@ -52,3 +57,4 @@ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
+obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 02f4611faa6..3b645ff46f7 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -37,15 +37,15 @@ static int clocked;
static void atmel_start_clock(void)
{
- clk_enable(iclk);
- clk_enable(fclk);
+ clk_prepare_enable(iclk);
+ clk_prepare_enable(fclk);
clocked = 1;
}
static void atmel_stop_clock(void)
{
- clk_disable(fclk);
- clk_disable(iclk);
+ clk_disable_unprepare(fclk);
+ clk_disable_unprepare(iclk);
clocked = 0;
}
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 3be3df233a0..bd831ec06dc 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -732,6 +732,7 @@ static struct platform_driver ehci_fsl_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "fsl-ehci",
+ .owner = THIS_MODULE,
.pm = EHCI_FSL_PM_OPS,
},
};
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 5d75de9729b..a77bd8dc33f 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -153,9 +153,7 @@ err_irq:
static int ehci_hcd_grlib_remove(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
-
- dev_set_drvdata(&op->dev, NULL);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n");
@@ -171,7 +169,7 @@ static int ehci_hcd_grlib_remove(struct platform_device *op)
static void ehci_hcd_grlib_shutdown(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 246e124e6ac..7abf1ce3a67 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -139,7 +139,7 @@ static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
/*-------------------------------------------------------------------------*/
/*
- * handshake - spin reading hc until handshake completes or fails
+ * ehci_handshake - spin reading hc until handshake completes or fails
* @ptr: address of hc register to be read
* @mask: bits to look at in result of read
* @done: value of those bits when handshake succeeds
@@ -155,8 +155,8 @@ static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
* before driver shutdown. But it also seems to be caused by bugs in cardbus
* bridge shutdown: shutting down the bridge before the devices using it.
*/
-static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
- u32 mask, u32 done, int usec)
+int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
{
u32 result;
@@ -172,6 +172,7 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
} while (usec > 0);
return -ETIMEDOUT;
}
+EXPORT_SYMBOL_GPL(ehci_handshake);
/* check TDI/ARC silicon is in host mode */
static int tdi_in_host_mode (struct ehci_hcd *ehci)
@@ -212,7 +213,7 @@ static int ehci_halt (struct ehci_hcd *ehci)
spin_unlock_irq(&ehci->lock);
synchronize_irq(ehci_to_hcd(ehci)->irq);
- return handshake(ehci, &ehci->regs->status,
+ return ehci_handshake(ehci, &ehci->regs->status,
STS_HALT, STS_HALT, 16 * 125);
}
@@ -251,7 +252,7 @@ static int ehci_reset (struct ehci_hcd *ehci)
ehci_writel(ehci, command, &ehci->regs->command);
ehci->rh_state = EHCI_RH_HALTED;
ehci->next_statechange = jiffies;
- retval = handshake (ehci, &ehci->regs->command,
+ retval = ehci_handshake(ehci, &ehci->regs->command,
CMD_RESET, 0, 250 * 1000);
if (ehci->has_hostpc) {
@@ -286,7 +287,8 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
/* wait for any schedule enables/disables to take effect */
temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
- handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125);
+ ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp,
+ 16 * 125);
/* then disable anything that's still active */
spin_lock_irq(&ehci->lock);
@@ -295,7 +297,8 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
spin_unlock_irq(&ehci->lock);
/* hardware can take 16 microframes to turn off ... */
- handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0, 16 * 125);
+ ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0,
+ 16 * 125);
}
/*-------------------------------------------------------------------------*/
@@ -1266,11 +1269,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_msp_driver
#endif
-#ifdef CONFIG_USB_EHCI_TEGRA
-#include "ehci-tegra.c"
-#define PLATFORM_DRIVER tegra_ehci_driver
-#endif
-
#ifdef CONFIG_SPARC_LEON
#include "ehci-grlib.c"
#define PLATFORM_DRIVER ehci_grlib_driver
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 9ab4a4d9768..2b702772d04 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -42,6 +42,12 @@ static int ehci_hub_control(
u16 wLength
);
+static int persist_enabled_on_companion(struct usb_device *udev, void *unused)
+{
+ return !udev->maxchild && udev->persist_enabled &&
+ udev->bus->root_hub->speed < USB_SPEED_HIGH;
+}
+
/* After a power loss, ports that were owned by the companion must be
* reset so that the companion can still own them.
*/
@@ -56,6 +62,16 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
if (!ehci->owned_ports)
return;
+ /*
+ * USB 1.1 devices are mostly HIDs, which don't need to persist across
+ * suspends. If we ensure that none of our companion's devices have
+ * persist_enabled (by looking through all USB 1.1 buses in the system),
+ * we can skip this and avoid slowing resume down. Devices without
+ * persist will just get reenumerated shortly after resume anyway.
+ */
+ if (!usb_for_each_dev(NULL, persist_enabled_on_companion))
+ return;
+
/* Make sure the ports are powered */
port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
@@ -876,7 +892,7 @@ static int ehci_hub_control (
PORT_SUSPEND | PORT_RESUME);
ehci_writel(ehci, temp, status_reg);
clear_bit(wIndex, &ehci->resuming_ports);
- retval = handshake(ehci, status_reg,
+ retval = ehci_handshake(ehci, status_reg,
PORT_RESUME, 0, 2000 /* 2msec */);
if (retval != 0) {
ehci_err(ehci,
@@ -902,7 +918,7 @@ static int ehci_hub_control (
/* REVISIT: some hardware needs 550+ usec to clear
* this bit; seems too long to spin routinely...
*/
- retval = handshake(ehci, status_reg,
+ retval = ehci_handshake(ehci, status_reg,
PORT_RESET, 0, 1000);
if (retval != 0) {
ehci_err (ehci, "port %d reset error %d\n",
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 402062973f0..915c2db96dc 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -166,14 +166,14 @@ static int mv_ehci_probe(struct platform_device *pdev)
if (IS_ERR(ehci_mv->clk)) {
dev_err(&pdev->dev, "error getting clock\n");
retval = PTR_ERR(ehci_mv->clk);
- goto err_clear_drvdata;
+ goto err_put_hcd;
}
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
if (r == NULL) {
dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
retval = -ENODEV;
- goto err_clear_drvdata;
+ goto err_put_hcd;
}
ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start,
@@ -181,14 +181,14 @@ static int mv_ehci_probe(struct platform_device *pdev)
if (ehci_mv->phy_regs == 0) {
dev_err(&pdev->dev, "failed to map phy I/O memory\n");
retval = -EFAULT;
- goto err_clear_drvdata;
+ goto err_put_hcd;
}
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
if (!r) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
- goto err_clear_drvdata;
+ goto err_put_hcd;
}
ehci_mv->cap_regs = devm_ioremap(&pdev->dev, r->start,
@@ -196,13 +196,13 @@ static int mv_ehci_probe(struct platform_device *pdev)
if (ehci_mv->cap_regs == NULL) {
dev_err(&pdev->dev, "failed to map I/O memory\n");
retval = -EFAULT;
- goto err_clear_drvdata;
+ goto err_put_hcd;
}
retval = mv_ehci_enable(ehci_mv);
if (retval) {
dev_err(&pdev->dev, "init phy error %d\n", retval);
- goto err_clear_drvdata;
+ goto err_put_hcd;
}
offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
@@ -274,8 +274,6 @@ err_set_vbus:
pdata->set_vbus(0);
err_disable_clk:
mv_ehci_disable(ehci_mv);
-err_clear_drvdata:
- platform_set_drvdata(pdev, NULL);
err_put_hcd:
usb_put_hcd(hcd);
@@ -300,8 +298,6 @@ static int mv_ehci_remove(struct platform_device *pdev)
mv_ehci_disable(ehci_mv);
}
- platform_set_drvdata(pdev, NULL);
-
usb_put_hcd(hcd);
return 0;
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index c369767b00e..e4c34ac386c 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -194,7 +194,6 @@ static int ehci_mxc_drv_remove(struct platform_device *pdev)
clk_disable_unprepare(priv->phyclk);
usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index a89750fff4f..45cc0015841 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -182,8 +182,6 @@ static int ehci_octeon_drv_remove(struct platform_device *pdev)
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 16d7150e855..9bd7dfe3315 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -187,6 +187,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
omap->phy[i] = phy;
+
+ if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
+ usb_phy_init(omap->phy[i]);
+ /* bring PHY out of suspend */
+ usb_phy_set_suspend(omap->phy[i], 0);
+ }
}
pm_runtime_enable(dev);
@@ -211,13 +217,14 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
/*
- * Bring PHYs out of reset.
+ * Bring PHYs out of reset for non PHY modes.
* Even though HSIC mode is a PHY-less mode, the reset
* line exists between the chips and can be modelled
* as a PHY device for reset control.
*/
for (i = 0; i < omap->nports; i++) {
- if (!omap->phy[i])
+ if (!omap->phy[i] ||
+ pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
continue;
usb_phy_init(omap->phy[i]);
@@ -294,7 +301,7 @@ static struct platform_driver ehci_hcd_omap_driver = {
/*.resume = ehci_hcd_omap_resume, */
.driver = {
.name = hcd_name,
- .of_match_table = of_match_ptr(omap_ehci_dt_ids),
+ .of_match_table = omap_ehci_dt_ids,
}
};
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index efbc588b48c..1a450aa13eb 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -303,7 +303,7 @@ static struct platform_driver ehci_orion_driver = {
.driver = {
.name = "orion-ehci",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(ehci_orion_dt_ids),
+ .of_match_table = ehci_orion_dt_ids,
},
};
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index f47f2594c9d..5733f8ed98f 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -146,7 +146,6 @@ static int ehci_platform_remove(struct platform_device *dev)
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
- platform_set_drvdata(dev, NULL);
if (pdata->power_off)
pdata->power_off(dev);
@@ -224,7 +223,7 @@ static struct platform_driver ehci_platform_driver = {
.owner = THIS_MODULE,
.name = "ehci-platform",
.pm = &ehci_platform_pm_ops,
- .of_match_table = of_match_ptr(vt8500_ehci_ids),
+ .of_match_table = vt8500_ehci_ids,
}
};
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 363890ee41d..601e208bd78 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -291,8 +291,7 @@ static const struct hc_driver ehci_msp_hc_driver = {
/*
* basic lifecycle operations
*/
- .reset = ehci_msp_setup,
- .start = ehci_run,
+ .reset = ehci_msp_setup,
.shutdown = ehci_shutdown,
.start = ehci_run,
.stop = ehci_stop,
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 56dc732bf45..86da09c0f8d 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -180,14 +180,12 @@ err_irq:
static int ehci_hcd_ppc_of_remove(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct device_node *np;
struct resource res;
- dev_set_drvdata(&op->dev, NULL);
-
dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
usb_remove_hcd(hcd);
@@ -219,7 +217,7 @@ static int ehci_hcd_ppc_of_remove(struct platform_device *op)
static void ehci_hcd_ppc_of_shutdown(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 379037f51a2..7cc26e621aa 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -50,6 +50,8 @@ struct s5p_ehci_hcd {
struct s5p_ehci_platdata *pdata;
};
+static struct s5p_ehci_platdata empty_platdata;
+
#define to_s5p_ehci(hcd) (struct s5p_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
static void s5p_setup_vbus_gpio(struct platform_device *pdev)
@@ -101,6 +103,13 @@ static int s5p_ehci_probe(struct platform_device *pdev)
return -ENOMEM;
}
s5p_ehci = to_s5p_ehci(hcd);
+
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "samsung,exynos5440-ehci")) {
+ s5p_ehci->pdata = &empty_platdata;
+ goto skip_phy;
+ }
+
phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(phy)) {
/* Fallback to pdata */
@@ -116,6 +125,8 @@ static int s5p_ehci_probe(struct platform_device *pdev)
s5p_ehci->otg = phy->otg;
}
+skip_phy:
+
s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
if (IS_ERR(s5p_ehci->clk)) {
@@ -277,6 +288,7 @@ static const struct dev_pm_ops s5p_ehci_pm_ops = {
#ifdef CONFIG_OF
static const struct of_device_id exynos_ehci_match[] = {
{ .compatible = "samsung,exynos4210-ehci" },
+ { .compatible = "samsung,exynos5440-ehci" },
{},
};
MODULE_DEVICE_TABLE(of, exynos_ehci_match);
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index f55477c5a1b..b2de52d3961 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -140,7 +140,6 @@ static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index b44d716ddc8..c4c0ee92a39 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -176,7 +176,6 @@ static int ehci_hcd_sh_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
clk_disable(priv->fclk);
clk_disable(priv->iclk);
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index bd3e5cbc624..1cf0adba3fc 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -148,10 +148,6 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct spear_ehci *sehci = to_spear_ehci(hcd);
- if (!hcd)
- return 0;
- if (in_interrupt())
- BUG();
usb_remove_hcd(hcd);
if (sehci->clk)
@@ -174,7 +170,7 @@ static struct platform_driver spear_ehci_hcd_driver = {
.name = "spear-ehci",
.bus = &platform_bus_type,
.pm = &ehci_spear_pm_ops,
- .of_match_table = of_match_ptr(spear_ehci_id_table),
+ .of_match_table = spear_ehci_id_table,
}
};
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 59d111bf44a..6ee7ef79b4f 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -17,59 +17,53 @@
*/
#include <linux/clk.h>
+#include <linux/clk/tegra.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/tegra_usb.h>
-#include <linux/irq.h>
-#include <linux/usb/otg.h>
#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tegra_usb.h>
#include <linux/pm_runtime.h>
+#include <linux/slab.h>
#include <linux/usb/ehci_def.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <linux/clk/tegra.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "ehci.h"
#define TEGRA_USB_BASE 0xC5000000
#define TEGRA_USB2_BASE 0xC5004000
#define TEGRA_USB3_BASE 0xC5008000
-/* PORTSC registers */
-#define TEGRA_USB_PORTSC1 0x184
-#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
-#define TEGRA_USB_PORTSC1_PHCD (1 << 23)
+#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
#define TEGRA_USB_DMA_ALIGN 32
+#define DRIVER_DESC "Tegra EHCI driver"
+#define DRV_NAME "tegra-ehci"
+
+static struct hc_driver __read_mostly tegra_ehci_hc_driver;
+
+static int (*orig_hub_control)(struct usb_hcd *hcd,
+ u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+
struct tegra_ehci_hcd {
- struct ehci_hcd *ehci;
struct tegra_usb_phy *phy;
struct clk *clk;
struct usb_phy *transceiver;
- int host_resumed;
int port_resuming;
bool needs_double_reset;
enum tegra_usb_phy_port_speed port_speed;
};
-static void tegra_ehci_power_up(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
- clk_prepare_enable(tegra->clk);
- usb_phy_set_suspend(hcd->phy, 0);
- tegra->host_resumed = 1;
-}
-
-static void tegra_ehci_power_down(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
- tegra->host_resumed = 0;
- usb_phy_set_suspend(hcd->phy, 1);
- clk_disable_unprepare(tegra->clk);
-}
-
static int tegra_ehci_internal_port_reset(
struct ehci_hcd *ehci,
u32 __iomem *portsc_reg
@@ -144,8 +138,8 @@ static int tegra_ehci_hub_control(
u16 wLength
)
{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)ehci->priv;
u32 __iomem *status_reg;
u32 temp;
unsigned long flags;
@@ -179,7 +173,7 @@ static int tegra_ehci_hub_control(
* If a transaction is in progress, there may be a delay in
* suspending the port. Poll until the port is suspended.
*/
- if (handshake(ehci, status_reg, PORT_SUSPEND,
+ if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
PORT_SUSPEND, 5000))
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
@@ -227,9 +221,9 @@ static int tegra_ehci_hub_control(
spin_lock_irqsave(&ehci->lock, flags);
/* Poll until the controller clears RESUME and SUSPEND */
- if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
+ if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
pr_err("%s: timeout waiting for RESUME\n", __func__);
- if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
+ if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
ehci->reset_done[wIndex-1] = 0;
@@ -242,58 +236,13 @@ static int tegra_ehci_hub_control(
spin_unlock_irqrestore(&ehci->lock, flags);
/* Handle the hub control events here */
- return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+ return orig_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+
done:
spin_unlock_irqrestore(&ehci->lock, flags);
return retval;
}
-static void tegra_ehci_restart(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci_reset(ehci);
-
- /* setup the frame list and Async q heads */
- ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
- ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
- /* setup the command register and set the controller in RUN mode */
- ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
- ehci->command |= CMD_RUN;
- ehci_writel(ehci, ehci->command, &ehci->regs->command);
-
- down_write(&ehci_cf_port_reset_rwsem);
- ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
- /* flush posted writes */
- ehci_readl(ehci, &ehci->regs->command);
- up_write(&ehci_cf_port_reset_rwsem);
-}
-
-static void tegra_ehci_shutdown(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
- /* ehci_shutdown touches the USB controller registers, make sure
- * controller has clocks to it */
- if (!tegra->host_resumed)
- tegra_ehci_power_up(hcd);
-
- ehci_shutdown(hcd);
-}
-
-static int tegra_ehci_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- /* EHCI registers start at offset 0x100 */
- ehci->caps = hcd->regs + 0x100;
-
- /* switch to host mode */
- hcd->has_tt = 1;
-
- return ehci_setup(hcd);
-}
-
struct dma_aligned_buffer {
void *kmalloc_ptr;
void *old_xfer_buffer;
@@ -373,38 +322,6 @@ static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
free_dma_aligned_buffer(urb);
}
-static const struct hc_driver tegra_ehci_hc_driver = {
- .description = hcd_name,
- .product_desc = "Tegra EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
- .flags = HCD_USB2 | HCD_MEMORY,
-
- /* standard ehci functions */
- .irq = ehci_irq,
- .start = ehci_run,
- .stop = ehci_stop,
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
- .get_frame_number = ehci_get_frame,
- .hub_status_data = ehci_hub_status_data,
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- /* modified ehci functions for tegra */
- .reset = tegra_ehci_setup,
- .shutdown = tegra_ehci_shutdown,
- .map_urb_for_dma = tegra_ehci_map_urb_for_dma,
- .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma,
- .hub_control = tegra_ehci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
-};
-
static int setup_vbus_gpio(struct platform_device *pdev,
struct tegra_ehci_platform_data *pdata)
{
@@ -432,220 +349,16 @@ static int setup_vbus_gpio(struct platform_device *pdev,
return err;
}
-#ifdef CONFIG_PM
-
-static int controller_suspend(struct device *dev)
-{
- struct tegra_ehci_hcd *tegra =
- platform_get_drvdata(to_platform_device(dev));
- struct ehci_hcd *ehci = tegra->ehci;
- struct usb_hcd *hcd = ehci_to_hcd(ehci);
- struct ehci_regs __iomem *hw = ehci->regs;
- unsigned long flags;
-
- if (time_before(jiffies, ehci->next_statechange))
- msleep(10);
-
- ehci_halt(ehci);
-
- spin_lock_irqsave(&ehci->lock, flags);
- tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- spin_unlock_irqrestore(&ehci->lock, flags);
-
- tegra_ehci_power_down(hcd);
- return 0;
-}
-
-static int controller_resume(struct device *dev)
-{
- struct tegra_ehci_hcd *tegra =
- platform_get_drvdata(to_platform_device(dev));
- struct ehci_hcd *ehci = tegra->ehci;
- struct usb_hcd *hcd = ehci_to_hcd(ehci);
- struct ehci_regs __iomem *hw = ehci->regs;
- unsigned long val;
-
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- tegra_ehci_power_up(hcd);
-
- if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
- /* Wait for the phy to detect new devices
- * before we restart the controller */
- msleep(10);
- goto restart;
- }
-
- /* Force the phy to keep data lines in suspend state */
- tegra_ehci_phy_restore_start(hcd->phy, tegra->port_speed);
-
- /* Enable host mode */
- tdi_reset(ehci);
-
- /* Enable Port Power */
- val = readl(&hw->port_status[0]);
- val |= PORT_POWER;
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Check if the phy resume from LP0. When the phy resume from LP0
- * USB register will be reset. */
- if (!readl(&hw->async_next)) {
- /* Program the field PTC based on the saved speed mode */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
- val |= PORT_TEST_FORCE;
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
- val |= PORT_TEST(6);
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
- val |= PORT_TEST(7);
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Disable test mode by setting PTC field to NORMAL_OP */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- writel(val, &hw->port_status[0]);
- udelay(10);
- }
-
- /* Poll until CCS is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
- PORT_CONNECT, 2000)) {
- pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
- goto restart;
- }
-
- /* Poll until PE is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_PE,
- PORT_PE, 2000)) {
- pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
- goto restart;
- }
-
- /* Clear the PCI status, to avoid an interrupt taken upon resume */
- val = readl(&hw->status);
- val |= STS_PCD;
- writel(val, &hw->status);
-
- /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
- val = readl(&hw->port_status[0]);
- if ((val & PORT_POWER) && (val & PORT_PE)) {
- val |= PORT_SUSPEND;
- writel(val, &hw->port_status[0]);
-
- /* Wait until port suspend completes */
- if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
- PORT_SUSPEND, 1000)) {
- pr_err("%s: timeout waiting for PORT_SUSPEND\n",
- __func__);
- goto restart;
- }
- }
-
- tegra_ehci_phy_restore_end(hcd->phy);
- goto done;
-
- restart:
- if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
- tegra_ehci_phy_restore_end(hcd->phy);
-
- tegra_ehci_restart(hcd);
-
- done:
- tegra_usb_phy_preresume(hcd->phy);
- tegra->port_resuming = 1;
- return 0;
-}
-
-static int tegra_ehci_suspend(struct device *dev)
-{
- struct tegra_ehci_hcd *tegra =
- platform_get_drvdata(to_platform_device(dev));
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
- int rc = 0;
-
- /*
- * When system sleep is supported and USB controller wakeup is
- * implemented: If the controller is runtime-suspended and the
- * wakeup setting needs to be changed, call pm_runtime_resume().
- */
- if (HCD_HW_ACCESSIBLE(hcd))
- rc = controller_suspend(dev);
- return rc;
-}
-
-static int tegra_ehci_resume(struct device *dev)
-{
- int rc;
-
- rc = controller_resume(dev);
- if (rc == 0) {
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
- return rc;
-}
-
-static int tegra_ehci_runtime_suspend(struct device *dev)
-{
- return controller_suspend(dev);
-}
-
-static int tegra_ehci_runtime_resume(struct device *dev)
-{
- return controller_resume(dev);
-}
-
-static const struct dev_pm_ops tegra_ehci_pm_ops = {
- .suspend = tegra_ehci_suspend,
- .resume = tegra_ehci_resume,
- .runtime_suspend = tegra_ehci_runtime_suspend,
- .runtime_resume = tegra_ehci_runtime_resume,
-};
-
-#endif
-
-/* Bits of PORTSC1, which will get cleared by writing 1 into them */
-#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-
-static void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val)
-{
- unsigned long val;
- struct usb_hcd *hcd = bus_to_hcd(x->otg->host);
- void __iomem *base = hcd->regs;
-
- val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
- val &= ~TEGRA_USB_PORTSC1_PTS(3);
- val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3);
- writel(val, base + TEGRA_USB_PORTSC1);
-}
-
-static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
-{
- unsigned long val;
- struct usb_hcd *hcd = bus_to_hcd(x->otg->host);
- void __iomem *base = hcd->regs;
-
- val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
- if (enable)
- val |= TEGRA_USB_PORTSC1_PHCD;
- else
- val &= ~TEGRA_USB_PORTSC1_PHCD;
- writel(val, base + TEGRA_USB_PORTSC1);
-}
-
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
struct tegra_ehci_hcd *tegra;
struct tegra_ehci_platform_data *pdata;
int err = 0;
int irq;
- int instance = pdev->id;
+ struct device_node *np_phy;
struct usb_phy *u_phy;
pdata = pdev->dev.platform_data;
@@ -665,35 +378,47 @@ static int tegra_ehci_probe(struct platform_device *pdev)
setup_vbus_gpio(pdev, pdata);
- tegra = devm_kzalloc(&pdev->dev, sizeof(struct tegra_ehci_hcd),
- GFP_KERNEL);
- if (!tegra)
- return -ENOMEM;
-
hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
- return -ENOMEM;
+ err = -ENOMEM;
+ goto cleanup_vbus_gpio;
}
+ platform_set_drvdata(pdev, hcd);
+ ehci = hcd_to_ehci(hcd);
+ tegra = (struct tegra_ehci_hcd *)ehci->priv;
- platform_set_drvdata(pdev, tegra);
+ hcd->has_tt = 1;
tegra->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(tegra->clk)) {
dev_err(&pdev->dev, "Can't get ehci clock\n");
err = PTR_ERR(tegra->clk);
- goto fail_clk;
+ goto cleanup_hcd_create;
}
err = clk_prepare_enable(tegra->clk);
if (err)
- goto fail_clk;
+ goto cleanup_clk_get;
tegra_periph_reset_assert(tegra->clk);
udelay(1);
tegra_periph_reset_deassert(tegra->clk);
+ np_phy = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0);
+ if (!np_phy) {
+ err = -ENODEV;
+ goto cleanup_clk_en;
+ }
+
+ u_phy = tegra_usb_get_phy(np_phy);
+ if (IS_ERR(u_phy)) {
+ err = PTR_ERR(u_phy);
+ goto cleanup_clk_en;
+ }
+ hcd->phy = u_phy;
+
tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node,
"nvidia,needs-double-reset");
@@ -701,7 +426,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
if (!res) {
dev_err(&pdev->dev, "Failed to get I/O memory\n");
err = -ENXIO;
- goto fail_io;
+ goto cleanup_clk_en;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
@@ -709,68 +434,36 @@ static int tegra_ehci_probe(struct platform_device *pdev)
if (!hcd->regs) {
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
err = -ENOMEM;
- goto fail_io;
- }
-
- /* This is pretty ugly and needs to be fixed when we do only
- * device-tree probing. Old code relies on the platform_device
- * numbering that we lack for device-tree-instantiated devices.
- */
- if (instance < 0) {
- switch (res->start) {
- case TEGRA_USB_BASE:
- instance = 0;
- break;
- case TEGRA_USB2_BASE:
- instance = 1;
- break;
- case TEGRA_USB3_BASE:
- instance = 2;
- break;
- default:
- err = -ENODEV;
- dev_err(&pdev->dev, "unknown usb instance\n");
- goto fail_io;
- }
+ goto cleanup_clk_en;
}
+ ehci->caps = hcd->regs + 0x100;
- tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs,
- pdata->phy_config,
- TEGRA_USB_PHY_MODE_HOST,
- tegra_ehci_set_pts,
- tegra_ehci_set_phcd);
- if (IS_ERR(tegra->phy)) {
- dev_err(&pdev->dev, "Failed to open USB phy\n");
- err = -ENXIO;
- goto fail_io;
+ err = usb_phy_init(hcd->phy);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to initialize phy\n");
+ goto cleanup_clk_en;
}
- hcd->phy = u_phy = &tegra->phy->u_phy;
- usb_phy_init(hcd->phy);
-
u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
GFP_KERNEL);
if (!u_phy->otg) {
dev_err(&pdev->dev, "Failed to alloc memory for otg\n");
err = -ENOMEM;
- goto fail_io;
+ goto cleanup_phy;
}
u_phy->otg->host = hcd_to_bus(hcd);
err = usb_phy_set_suspend(hcd->phy, 0);
if (err) {
dev_err(&pdev->dev, "Failed to power on the phy\n");
- goto fail_phy;
+ goto cleanup_phy;
}
- tegra->host_resumed = 1;
- tegra->ehci = hcd_to_ehci(hcd);
-
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "Failed to get IRQ\n");
err = -ENODEV;
- goto fail_phy;
+ goto cleanup_phy;
}
if (pdata->operating_mode == TEGRA_USB_OTG) {
@@ -785,39 +478,32 @@ static int tegra_ehci_probe(struct platform_device *pdev)
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
- goto fail;
+ goto cleanup_transceiver;
}
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_get_noresume(&pdev->dev);
-
- /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
- /* if (!pdata->power_down_on_bus_suspend) */
- pm_runtime_forbid(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- pm_runtime_put_sync(&pdev->dev);
return err;
-fail:
+cleanup_transceiver:
if (!IS_ERR(tegra->transceiver))
otg_set_host(tegra->transceiver->otg, NULL);
-fail_phy:
+cleanup_phy:
usb_phy_shutdown(hcd->phy);
-fail_io:
+cleanup_clk_en:
clk_disable_unprepare(tegra->clk);
-fail_clk:
+cleanup_clk_get:
+ clk_put(tegra->clk);
+cleanup_hcd_create:
usb_put_hcd(hcd);
+cleanup_vbus_gpio:
+ /* FIXME: Undo setup_vbus_gpio() here */
return err;
}
static int tegra_ehci_remove(struct platform_device *pdev)
{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- pm_runtime_get_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- pm_runtime_put_noidle(&pdev->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct tegra_ehci_hcd *tegra =
+ (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
if (!IS_ERR(tegra->transceiver))
otg_set_host(tegra->transceiver->otg, NULL);
@@ -833,8 +519,7 @@ static int tegra_ehci_remove(struct platform_device *pdev)
static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
@@ -850,10 +535,50 @@ static struct platform_driver tegra_ehci_driver = {
.remove = tegra_ehci_remove,
.shutdown = tegra_ehci_hcd_shutdown,
.driver = {
- .name = "tegra-ehci",
+ .name = DRV_NAME,
.of_match_table = tegra_ehci_of_match,
-#ifdef CONFIG_PM
- .pm = &tegra_ehci_pm_ops,
-#endif
}
};
+
+static const struct ehci_driver_overrides tegra_overrides __initconst = {
+ .extra_priv_size = sizeof(struct tegra_ehci_hcd),
+};
+
+static int __init ehci_tegra_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info(DRV_NAME ": " DRIVER_DESC "\n");
+
+ ehci_init_driver(&tegra_ehci_hc_driver, &tegra_overrides);
+
+ /*
+ * The Tegra HW has some unusual quirks, which require Tegra-specific
+ * workarounds. We override certain hc_driver functions here to
+ * achieve that. We explicitly do not enhance ehci_driver_overrides to
+ * allow this more easily, since this is an unusual case, and we don't
+ * want to encourage others to override these functions by making it
+ * too easy.
+ */
+
+ orig_hub_control = tegra_ehci_hc_driver.hub_control;
+
+ tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma;
+ tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma;
+ tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control;
+
+ return platform_driver_register(&tegra_ehci_driver);
+}
+module_init(ehci_tegra_init);
+
+static void __exit ehci_tegra_cleanup(void)
+{
+ platform_driver_unregister(&tegra_ehci_driver);
+}
+module_exit(ehci_tegra_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DEVICE_TABLE(of, tegra_ehci_of_match);
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
index b083a350eea..d72b2929c03 100644
--- a/drivers/usb/host/ehci-tilegx.c
+++ b/drivers/usb/host/ehci-tilegx.c
@@ -193,7 +193,6 @@ static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev)
tilegx_stop_ehc();
gxio_usb_host_destroy(&pdata->usb_ctx);
destroy_irq(pdata->irq);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index d845e3bcfaf..35c7f90384a 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -209,8 +209,7 @@ err_irq:
*/
static int ehci_hcd_xilinx_of_remove(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
- dev_set_drvdata(&op->dev, NULL);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
dev_dbg(&op->dev, "stopping XILINX-OF USB Controller\n");
@@ -229,7 +228,7 @@ static int ehci_hcd_xilinx_of_remove(struct platform_device *op)
*/
static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 7c978b23520..64f9a08e959 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -800,6 +800,8 @@ struct ehci_driver_overrides {
extern void ehci_init_driver(struct hc_driver *drv,
const struct ehci_driver_overrides *over);
extern int ehci_setup(struct usb_hcd *hcd);
+extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec);
#ifdef CONFIG_PM
extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 8f18538e0ff..95ca5986e67 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -739,9 +739,13 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
}
/* for ISO transfer calculate start frame index */
- if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
- urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+ if (ed->mode == FHCI_TF_ISO) {
+ /* Ignore the possibility of underruns */
+ urb->start_frame = ed->td_head ? ed->next_iso :
get_frame_num(fhci);
+ ed->next_iso = (urb->start_frame + urb->interval *
+ urb->number_of_packets) & 0x07ff;
+ }
/*
* OHCI handles the DATA toggle itself,we just use the USB
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 7cc1c32dc36..154e6a00772 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -338,7 +338,7 @@ struct ed {
/* read only parameters, should be cleared upon initialization */
u8 toggle_carry; /* toggle carry from the last TD submitted */
- u32 last_iso; /* time stamp of last queued ISO transfer */
+ u16 next_iso; /* time stamp of next queued ISO transfer */
struct td *td_head; /* a pointer to the current TD handled */
};
diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
new file mode 100644
index 00000000000..299253c826c
--- /dev/null
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -0,0 +1,5972 @@
+/*
+ * Faraday FUSBH200 EHCI-like driver
+ *
+ * Copyright (c) 2013 Faraday Technology Corporation
+ *
+ * Author: Yuan-Hsin Chen <yhchen@faraday-tech.com>
+ * Feng-Hsin Chiang <john453@faraday-tech.com>
+ * Po-Yu Chuang <ratbert.chuang@gmail.com>
+ *
+ * Most of code borrowed from the Linux-3.7 EHCI driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/hrtimer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+/*-------------------------------------------------------------------------*/
+#define DRIVER_AUTHOR "Yuan-Hsin Chen"
+#define DRIVER_DESC "FUSBH200 Host Controller (EHCI) Driver"
+
+static const char hcd_name [] = "fusbh200_hcd";
+
+#undef VERBOSE_DEBUG
+#undef FUSBH200_URB_TRACE
+
+#ifdef DEBUG
+#define FUSBH200_STATS
+#endif
+
+/* magic numbers that can affect system performance */
+#define FUSBH200_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
+#define FUSBH200_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
+#define FUSBH200_TUNE_RL_TT 0
+#define FUSBH200_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
+#define FUSBH200_TUNE_MULT_TT 1
+/*
+ * Some drivers think it's safe to schedule isochronous transfers more than
+ * 256 ms into the future (partly as a result of an old bug in the scheduling
+ * code). In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define FUSBH200_TUNE_FLS 1 /* (medium) 512-frame schedule */
+
+/* Initial IRQ latency: faster than hw default */
+static int log2_irq_thresh = 0; // 0 to 6
+module_param (log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* initial park setting: slower than hw default */
+static unsigned park = 0;
+module_param (park, uint, S_IRUGO);
+MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+
+/* for link power management(LPM) feature */
+static unsigned int hird;
+module_param(hird, int, S_IRUGO);
+MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
+
+#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+#include "fusbh200.h"
+
+/*-------------------------------------------------------------------------*/
+
+#define fusbh200_dbg(fusbh200, fmt, args...) \
+ dev_dbg (fusbh200_to_hcd(fusbh200)->self.controller , fmt , ## args )
+#define fusbh200_err(fusbh200, fmt, args...) \
+ dev_err (fusbh200_to_hcd(fusbh200)->self.controller , fmt , ## args )
+#define fusbh200_info(fusbh200, fmt, args...) \
+ dev_info (fusbh200_to_hcd(fusbh200)->self.controller , fmt , ## args )
+#define fusbh200_warn(fusbh200, fmt, args...) \
+ dev_warn (fusbh200_to_hcd(fusbh200)->self.controller , fmt , ## args )
+
+#ifdef VERBOSE_DEBUG
+# define fusbh200_vdbg fusbh200_dbg
+#else
+ static inline void fusbh200_vdbg(struct fusbh200_hcd *fusbh200, ...) {}
+#endif
+
+#ifdef DEBUG
+
+/* check the values in the HCSPARAMS register
+ * (host controller _Structural_ parameters)
+ * see EHCI spec, Table 2-4 for each value
+ */
+static void dbg_hcs_params (struct fusbh200_hcd *fusbh200, char *label)
+{
+ u32 params = fusbh200_readl(fusbh200, &fusbh200->caps->hcs_params);
+
+ fusbh200_dbg (fusbh200,
+ "%s hcs_params 0x%x ports=%d\n",
+ label, params,
+ HCS_N_PORTS (params)
+ );
+}
+#else
+
+static inline void dbg_hcs_params (struct fusbh200_hcd *fusbh200, char *label) {}
+
+#endif
+
+#ifdef DEBUG
+
+/* check the values in the HCCPARAMS register
+ * (host controller _Capability_ parameters)
+ * see EHCI Spec, Table 2-5 for each value
+ * */
+static void dbg_hcc_params (struct fusbh200_hcd *fusbh200, char *label)
+{
+ u32 params = fusbh200_readl(fusbh200, &fusbh200->caps->hcc_params);
+
+ fusbh200_dbg (fusbh200,
+ "%s hcc_params %04x uframes %s%s\n",
+ label,
+ params,
+ HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
+ HCC_CANPARK(params) ? " park" : "");
+}
+#else
+
+static inline void dbg_hcc_params (struct fusbh200_hcd *fusbh200, char *label) {}
+
+#endif
+
+#ifdef DEBUG
+
+static void __maybe_unused
+dbg_qtd (const char *label, struct fusbh200_hcd *fusbh200, struct fusbh200_qtd *qtd)
+{
+ fusbh200_dbg(fusbh200, "%s td %p n%08x %08x t%08x p0=%08x\n", label, qtd,
+ hc32_to_cpup(fusbh200, &qtd->hw_next),
+ hc32_to_cpup(fusbh200, &qtd->hw_alt_next),
+ hc32_to_cpup(fusbh200, &qtd->hw_token),
+ hc32_to_cpup(fusbh200, &qtd->hw_buf [0]));
+ if (qtd->hw_buf [1])
+ fusbh200_dbg(fusbh200, " p1=%08x p2=%08x p3=%08x p4=%08x\n",
+ hc32_to_cpup(fusbh200, &qtd->hw_buf[1]),
+ hc32_to_cpup(fusbh200, &qtd->hw_buf[2]),
+ hc32_to_cpup(fusbh200, &qtd->hw_buf[3]),
+ hc32_to_cpup(fusbh200, &qtd->hw_buf[4]));
+}
+
+static void __maybe_unused
+dbg_qh (const char *label, struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ struct fusbh200_qh_hw *hw = qh->hw;
+
+ fusbh200_dbg (fusbh200, "%s qh %p n%08x info %x %x qtd %x\n", label,
+ qh, hw->hw_next, hw->hw_info1, hw->hw_info2, hw->hw_current);
+ dbg_qtd("overlay", fusbh200, (struct fusbh200_qtd *) &hw->hw_qtd_next);
+}
+
+static void __maybe_unused
+dbg_itd (const char *label, struct fusbh200_hcd *fusbh200, struct fusbh200_itd *itd)
+{
+ fusbh200_dbg (fusbh200, "%s [%d] itd %p, next %08x, urb %p\n",
+ label, itd->frame, itd, hc32_to_cpu(fusbh200, itd->hw_next),
+ itd->urb);
+ fusbh200_dbg (fusbh200,
+ " trans: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+ hc32_to_cpu(fusbh200, itd->hw_transaction[0]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[1]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[2]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[3]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[4]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[5]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[6]),
+ hc32_to_cpu(fusbh200, itd->hw_transaction[7]));
+ fusbh200_dbg (fusbh200,
+ " buf: %08x %08x %08x %08x %08x %08x %08x\n",
+ hc32_to_cpu(fusbh200, itd->hw_bufp[0]),
+ hc32_to_cpu(fusbh200, itd->hw_bufp[1]),
+ hc32_to_cpu(fusbh200, itd->hw_bufp[2]),
+ hc32_to_cpu(fusbh200, itd->hw_bufp[3]),
+ hc32_to_cpu(fusbh200, itd->hw_bufp[4]),
+ hc32_to_cpu(fusbh200, itd->hw_bufp[5]),
+ hc32_to_cpu(fusbh200, itd->hw_bufp[6]));
+ fusbh200_dbg (fusbh200, " index: %d %d %d %d %d %d %d %d\n",
+ itd->index[0], itd->index[1], itd->index[2],
+ itd->index[3], itd->index[4], itd->index[5],
+ itd->index[6], itd->index[7]);
+}
+
+static int __maybe_unused
+dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
+{
+ return scnprintf (buf, len,
+ "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
+ label, label [0] ? " " : "", status,
+ (status & STS_ASS) ? " Async" : "",
+ (status & STS_PSS) ? " Periodic" : "",
+ (status & STS_RECL) ? " Recl" : "",
+ (status & STS_HALT) ? " Halt" : "",
+ (status & STS_IAA) ? " IAA" : "",
+ (status & STS_FATAL) ? " FATAL" : "",
+ (status & STS_FLR) ? " FLR" : "",
+ (status & STS_PCD) ? " PCD" : "",
+ (status & STS_ERR) ? " ERR" : "",
+ (status & STS_INT) ? " INT" : ""
+ );
+}
+
+static int __maybe_unused
+dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
+{
+ return scnprintf (buf, len,
+ "%s%sintrenable %02x%s%s%s%s%s%s",
+ label, label [0] ? " " : "", enable,
+ (enable & STS_IAA) ? " IAA" : "",
+ (enable & STS_FATAL) ? " FATAL" : "",
+ (enable & STS_FLR) ? " FLR" : "",
+ (enable & STS_PCD) ? " PCD" : "",
+ (enable & STS_ERR) ? " ERR" : "",
+ (enable & STS_INT) ? " INT" : ""
+ );
+}
+
+static const char *const fls_strings [] =
+ { "1024", "512", "256", "??" };
+
+static int
+dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
+{
+ return scnprintf (buf, len,
+ "%s%scommand %07x %s=%d ithresh=%d%s%s%s "
+ "period=%s%s %s",
+ label, label [0] ? " " : "", command,
+ (command & CMD_PARK) ? " park" : "(park)",
+ CMD_PARK_CNT (command),
+ (command >> 16) & 0x3f,
+ (command & CMD_IAAD) ? " IAAD" : "",
+ (command & CMD_ASE) ? " Async" : "",
+ (command & CMD_PSE) ? " Periodic" : "",
+ fls_strings [(command >> 2) & 0x3],
+ (command & CMD_RESET) ? " Reset" : "",
+ (command & CMD_RUN) ? "RUN" : "HALT"
+ );
+}
+
+static int
+dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status)
+{
+ char *sig;
+
+ /* signaling state */
+ switch (status & (3 << 10)) {
+ case 0 << 10: sig = "se0"; break;
+ case 1 << 10: sig = "k"; break; /* low speed */
+ case 2 << 10: sig = "j"; break;
+ default: sig = "?"; break;
+ }
+
+ return scnprintf (buf, len,
+ "%s%sport:%d status %06x %d "
+ "sig=%s%s%s%s%s%s%s%s",
+ label, label [0] ? " " : "", port, status,
+ status>>25,/*device address */
+ sig,
+ (status & PORT_RESET) ? " RESET" : "",
+ (status & PORT_SUSPEND) ? " SUSPEND" : "",
+ (status & PORT_RESUME) ? " RESUME" : "",
+ (status & PORT_PEC) ? " PEC" : "",
+ (status & PORT_PE) ? " PE" : "",
+ (status & PORT_CSC) ? " CSC" : "",
+ (status & PORT_CONNECT) ? " CONNECT" : "");
+}
+
+#else
+static inline void __maybe_unused
+dbg_qh (char *label, struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{}
+
+static inline int __maybe_unused
+dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
+{ return 0; }
+
+static inline int __maybe_unused
+dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
+{ return 0; }
+
+static inline int __maybe_unused
+dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
+{ return 0; }
+
+static inline int __maybe_unused
+dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status)
+{ return 0; }
+
+#endif /* DEBUG */
+
+/* functions have the "wrong" filename when they're output... */
+#define dbg_status(fusbh200, label, status) { \
+ char _buf [80]; \
+ dbg_status_buf (_buf, sizeof _buf, label, status); \
+ fusbh200_dbg (fusbh200, "%s\n", _buf); \
+}
+
+#define dbg_cmd(fusbh200, label, command) { \
+ char _buf [80]; \
+ dbg_command_buf (_buf, sizeof _buf, label, command); \
+ fusbh200_dbg (fusbh200, "%s\n", _buf); \
+}
+
+#define dbg_port(fusbh200, label, port, status) { \
+ char _buf [80]; \
+ dbg_port_buf (_buf, sizeof _buf, label, port, status); \
+ fusbh200_dbg (fusbh200, "%s\n", _buf); \
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef STUB_DEBUG_FILES
+
+static inline void create_debug_files (struct fusbh200_hcd *bus) { }
+static inline void remove_debug_files (struct fusbh200_hcd *bus) { }
+
+#else
+
+/* troubleshooting help: expose state in debugfs */
+
+static int debug_async_open(struct inode *, struct file *);
+static int debug_periodic_open(struct inode *, struct file *);
+static int debug_registers_open(struct inode *, struct file *);
+static int debug_async_open(struct inode *, struct file *);
+
+static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
+static int debug_close(struct inode *, struct file *);
+
+static const struct file_operations debug_async_fops = {
+ .owner = THIS_MODULE,
+ .open = debug_async_open,
+ .read = debug_output,
+ .release = debug_close,
+ .llseek = default_llseek,
+};
+static const struct file_operations debug_periodic_fops = {
+ .owner = THIS_MODULE,
+ .open = debug_periodic_open,
+ .read = debug_output,
+ .release = debug_close,
+ .llseek = default_llseek,
+};
+static const struct file_operations debug_registers_fops = {
+ .owner = THIS_MODULE,
+ .open = debug_registers_open,
+ .read = debug_output,
+ .release = debug_close,
+ .llseek = default_llseek,
+};
+
+static struct dentry *fusbh200_debug_root;
+
+struct debug_buffer {
+ ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
+ struct usb_bus *bus;
+ struct mutex mutex; /* protect filling of buffer */
+ size_t count; /* number of characters filled into buffer */
+ char *output_buf;
+ size_t alloc_size;
+};
+
+#define speed_char(info1) ({ char tmp; \
+ switch (info1 & (3 << 12)) { \
+ case QH_FULL_SPEED: tmp = 'f'; break; \
+ case QH_LOW_SPEED: tmp = 'l'; break; \
+ case QH_HIGH_SPEED: tmp = 'h'; break; \
+ default: tmp = '?'; break; \
+ }; tmp; })
+
+static inline char token_mark(struct fusbh200_hcd *fusbh200, __hc32 token)
+{
+ __u32 v = hc32_to_cpu(fusbh200, token);
+
+ if (v & QTD_STS_ACTIVE)
+ return '*';
+ if (v & QTD_STS_HALT)
+ return '-';
+ if (!IS_SHORT_READ (v))
+ return ' ';
+ /* tries to advance through hw_alt_next */
+ return '/';
+}
+
+static void qh_lines (
+ struct fusbh200_hcd *fusbh200,
+ struct fusbh200_qh *qh,
+ char **nextp,
+ unsigned *sizep
+)
+{
+ u32 scratch;
+ u32 hw_curr;
+ struct fusbh200_qtd *td;
+ unsigned temp;
+ unsigned size = *sizep;
+ char *next = *nextp;
+ char mark;
+ __le32 list_end = FUSBH200_LIST_END(fusbh200);
+ struct fusbh200_qh_hw *hw = qh->hw;
+
+ if (hw->hw_qtd_next == list_end) /* NEC does this */
+ mark = '@';
+ else
+ mark = token_mark(fusbh200, hw->hw_token);
+ if (mark == '/') { /* qh_alt_next controls qh advance? */
+ if ((hw->hw_alt_next & QTD_MASK(fusbh200))
+ == fusbh200->async->hw->hw_alt_next)
+ mark = '#'; /* blocked */
+ else if (hw->hw_alt_next == list_end)
+ mark = '.'; /* use hw_qtd_next */
+ /* else alt_next points to some other qtd */
+ }
+ scratch = hc32_to_cpup(fusbh200, &hw->hw_info1);
+ hw_curr = (mark == '*') ? hc32_to_cpup(fusbh200, &hw->hw_current) : 0;
+ temp = scnprintf (next, size,
+ "qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)",
+ qh, scratch & 0x007f,
+ speed_char (scratch),
+ (scratch >> 8) & 0x000f,
+ scratch, hc32_to_cpup(fusbh200, &hw->hw_info2),
+ hc32_to_cpup(fusbh200, &hw->hw_token), mark,
+ (cpu_to_hc32(fusbh200, QTD_TOGGLE) & hw->hw_token)
+ ? "data1" : "data0",
+ (hc32_to_cpup(fusbh200, &hw->hw_alt_next) >> 1) & 0x0f);
+ size -= temp;
+ next += temp;
+
+ /* hc may be modifying the list as we read it ... */
+ list_for_each_entry(td, &qh->qtd_list, qtd_list) {
+ scratch = hc32_to_cpup(fusbh200, &td->hw_token);
+ mark = ' ';
+ if (hw_curr == td->qtd_dma)
+ mark = '*';
+ else if (hw->hw_qtd_next == cpu_to_hc32(fusbh200, td->qtd_dma))
+ mark = '+';
+ else if (QTD_LENGTH (scratch)) {
+ if (td->hw_alt_next == fusbh200->async->hw->hw_alt_next)
+ mark = '#';
+ else if (td->hw_alt_next != list_end)
+ mark = '/';
+ }
+ temp = snprintf (next, size,
+ "\n\t%p%c%s len=%d %08x urb %p",
+ td, mark, ({ char *tmp;
+ switch ((scratch>>8)&0x03) {
+ case 0: tmp = "out"; break;
+ case 1: tmp = "in"; break;
+ case 2: tmp = "setup"; break;
+ default: tmp = "?"; break;
+ } tmp;}),
+ (scratch >> 16) & 0x7fff,
+ scratch,
+ td->urb);
+ if (size < temp)
+ temp = size;
+ size -= temp;
+ next += temp;
+ if (temp == size)
+ goto done;
+ }
+
+ temp = snprintf (next, size, "\n");
+ if (size < temp)
+ temp = size;
+ size -= temp;
+ next += temp;
+
+done:
+ *sizep = size;
+ *nextp = next;
+}
+
+static ssize_t fill_async_buffer(struct debug_buffer *buf)
+{
+ struct usb_hcd *hcd;
+ struct fusbh200_hcd *fusbh200;
+ unsigned long flags;
+ unsigned temp, size;
+ char *next;
+ struct fusbh200_qh *qh;
+
+ hcd = bus_to_hcd(buf->bus);
+ fusbh200 = hcd_to_fusbh200 (hcd);
+ next = buf->output_buf;
+ size = buf->alloc_size;
+
+ *next = 0;
+
+ /* dumps a snapshot of the async schedule.
+ * usually empty except for long-term bulk reads, or head.
+ * one QH per line, and TDs we know about
+ */
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ for (qh = fusbh200->async->qh_next.qh; size > 0 && qh; qh = qh->qh_next.qh)
+ qh_lines (fusbh200, qh, &next, &size);
+ if (fusbh200->async_unlink && size > 0) {
+ temp = scnprintf(next, size, "\nunlink =\n");
+ size -= temp;
+ next += temp;
+
+ for (qh = fusbh200->async_unlink; size > 0 && qh;
+ qh = qh->unlink_next)
+ qh_lines (fusbh200, qh, &next, &size);
+ }
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+
+ return strlen(buf->output_buf);
+}
+
+#define DBG_SCHED_LIMIT 64
+static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
+{
+ struct usb_hcd *hcd;
+ struct fusbh200_hcd *fusbh200;
+ unsigned long flags;
+ union fusbh200_shadow p, *seen;
+ unsigned temp, size, seen_count;
+ char *next;
+ unsigned i;
+ __hc32 tag;
+
+ if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
+ return 0;
+ seen_count = 0;
+
+ hcd = bus_to_hcd(buf->bus);
+ fusbh200 = hcd_to_fusbh200 (hcd);
+ next = buf->output_buf;
+ size = buf->alloc_size;
+
+ temp = scnprintf (next, size, "size = %d\n", fusbh200->periodic_size);
+ size -= temp;
+ next += temp;
+
+ /* dump a snapshot of the periodic schedule.
+ * iso changes, interrupt usually doesn't.
+ */
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ for (i = 0; i < fusbh200->periodic_size; i++) {
+ p = fusbh200->pshadow [i];
+ if (likely (!p.ptr))
+ continue;
+ tag = Q_NEXT_TYPE(fusbh200, fusbh200->periodic [i]);
+
+ temp = scnprintf (next, size, "%4d: ", i);
+ size -= temp;
+ next += temp;
+
+ do {
+ struct fusbh200_qh_hw *hw;
+
+ switch (hc32_to_cpu(fusbh200, tag)) {
+ case Q_TYPE_QH:
+ hw = p.qh->hw;
+ temp = scnprintf (next, size, " qh%d-%04x/%p",
+ p.qh->period,
+ hc32_to_cpup(fusbh200,
+ &hw->hw_info2)
+ /* uframe masks */
+ & (QH_CMASK | QH_SMASK),
+ p.qh);
+ size -= temp;
+ next += temp;
+ /* don't repeat what follows this qh */
+ for (temp = 0; temp < seen_count; temp++) {
+ if (seen [temp].ptr != p.ptr)
+ continue;
+ if (p.qh->qh_next.ptr) {
+ temp = scnprintf (next, size,
+ " ...");
+ size -= temp;
+ next += temp;
+ }
+ break;
+ }
+ /* show more info the first time around */
+ if (temp == seen_count) {
+ u32 scratch = hc32_to_cpup(fusbh200,
+ &hw->hw_info1);
+ struct fusbh200_qtd *qtd;
+ char *type = "";
+
+ /* count tds, get ep direction */
+ temp = 0;
+ list_for_each_entry (qtd,
+ &p.qh->qtd_list,
+ qtd_list) {
+ temp++;
+ switch (0x03 & (hc32_to_cpu(
+ fusbh200,
+ qtd->hw_token) >> 8)) {
+ case 0: type = "out"; continue;
+ case 1: type = "in"; continue;
+ }
+ }
+
+ temp = scnprintf (next, size,
+ " (%c%d ep%d%s "
+ "[%d/%d] q%d p%d)",
+ speed_char (scratch),
+ scratch & 0x007f,
+ (scratch >> 8) & 0x000f, type,
+ p.qh->usecs, p.qh->c_usecs,
+ temp,
+ 0x7ff & (scratch >> 16));
+
+ if (seen_count < DBG_SCHED_LIMIT)
+ seen [seen_count++].qh = p.qh;
+ } else
+ temp = 0;
+ tag = Q_NEXT_TYPE(fusbh200, hw->hw_next);
+ p = p.qh->qh_next;
+ break;
+ case Q_TYPE_FSTN:
+ temp = scnprintf (next, size,
+ " fstn-%8x/%p", p.fstn->hw_prev,
+ p.fstn);
+ tag = Q_NEXT_TYPE(fusbh200, p.fstn->hw_next);
+ p = p.fstn->fstn_next;
+ break;
+ case Q_TYPE_ITD:
+ temp = scnprintf (next, size,
+ " itd/%p", p.itd);
+ tag = Q_NEXT_TYPE(fusbh200, p.itd->hw_next);
+ p = p.itd->itd_next;
+ break;
+ }
+ size -= temp;
+ next += temp;
+ } while (p.ptr);
+
+ temp = scnprintf (next, size, "\n");
+ size -= temp;
+ next += temp;
+ }
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ kfree (seen);
+
+ return buf->alloc_size - size;
+}
+#undef DBG_SCHED_LIMIT
+
+static const char *rh_state_string(struct fusbh200_hcd *fusbh200)
+{
+ switch (fusbh200->rh_state) {
+ case FUSBH200_RH_HALTED:
+ return "halted";
+ case FUSBH200_RH_SUSPENDED:
+ return "suspended";
+ case FUSBH200_RH_RUNNING:
+ return "running";
+ case FUSBH200_RH_STOPPING:
+ return "stopping";
+ }
+ return "?";
+}
+
+static ssize_t fill_registers_buffer(struct debug_buffer *buf)
+{
+ struct usb_hcd *hcd;
+ struct fusbh200_hcd *fusbh200;
+ unsigned long flags;
+ unsigned temp, size, i;
+ char *next, scratch [80];
+ static char fmt [] = "%*s\n";
+ static char label [] = "";
+
+ hcd = bus_to_hcd(buf->bus);
+ fusbh200 = hcd_to_fusbh200 (hcd);
+ next = buf->output_buf;
+ size = buf->alloc_size;
+
+ spin_lock_irqsave (&fusbh200->lock, flags);
+
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
+ size = scnprintf (next, size,
+ "bus %s, device %s\n"
+ "%s\n"
+ "SUSPENDED (no register access)\n",
+ hcd->self.controller->bus->name,
+ dev_name(hcd->self.controller),
+ hcd->product_desc);
+ goto done;
+ }
+
+ /* Capability Registers */
+ i = HC_VERSION(fusbh200, fusbh200_readl(fusbh200, &fusbh200->caps->hc_capbase));
+ temp = scnprintf (next, size,
+ "bus %s, device %s\n"
+ "%s\n"
+ "EHCI %x.%02x, rh state %s\n",
+ hcd->self.controller->bus->name,
+ dev_name(hcd->self.controller),
+ hcd->product_desc,
+ i >> 8, i & 0x0ff, rh_state_string(fusbh200));
+ size -= temp;
+ next += temp;
+
+ // FIXME interpret both types of params
+ i = fusbh200_readl(fusbh200, &fusbh200->caps->hcs_params);
+ temp = scnprintf (next, size, "structural params 0x%08x\n", i);
+ size -= temp;
+ next += temp;
+
+ i = fusbh200_readl(fusbh200, &fusbh200->caps->hcc_params);
+ temp = scnprintf (next, size, "capability params 0x%08x\n", i);
+ size -= temp;
+ next += temp;
+
+ /* Operational Registers */
+ temp = dbg_status_buf (scratch, sizeof scratch, label,
+ fusbh200_readl(fusbh200, &fusbh200->regs->status));
+ temp = scnprintf (next, size, fmt, temp, scratch);
+ size -= temp;
+ next += temp;
+
+ temp = dbg_command_buf (scratch, sizeof scratch, label,
+ fusbh200_readl(fusbh200, &fusbh200->regs->command));
+ temp = scnprintf (next, size, fmt, temp, scratch);
+ size -= temp;
+ next += temp;
+
+ temp = dbg_intr_buf (scratch, sizeof scratch, label,
+ fusbh200_readl(fusbh200, &fusbh200->regs->intr_enable));
+ temp = scnprintf (next, size, fmt, temp, scratch);
+ size -= temp;
+ next += temp;
+
+ temp = scnprintf (next, size, "uframe %04x\n",
+ fusbh200_read_frame_index(fusbh200));
+ size -= temp;
+ next += temp;
+
+ if (fusbh200->async_unlink) {
+ temp = scnprintf(next, size, "async unlink qh %p\n",
+ fusbh200->async_unlink);
+ size -= temp;
+ next += temp;
+ }
+
+#ifdef FUSBH200_STATS
+ temp = scnprintf (next, size,
+ "irq normal %ld err %ld iaa %ld (lost %ld)\n",
+ fusbh200->stats.normal, fusbh200->stats.error, fusbh200->stats.iaa,
+ fusbh200->stats.lost_iaa);
+ size -= temp;
+ next += temp;
+
+ temp = scnprintf (next, size, "complete %ld unlink %ld\n",
+ fusbh200->stats.complete, fusbh200->stats.unlink);
+ size -= temp;
+ next += temp;
+#endif
+
+done:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+
+ return buf->alloc_size - size;
+}
+
+static struct debug_buffer *alloc_buffer(struct usb_bus *bus,
+ ssize_t (*fill_func)(struct debug_buffer *))
+{
+ struct debug_buffer *buf;
+
+ buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
+
+ if (buf) {
+ buf->bus = bus;
+ buf->fill_func = fill_func;
+ mutex_init(&buf->mutex);
+ buf->alloc_size = PAGE_SIZE;
+ }
+
+ return buf;
+}
+
+static int fill_buffer(struct debug_buffer *buf)
+{
+ int ret = 0;
+
+ if (!buf->output_buf)
+ buf->output_buf = vmalloc(buf->alloc_size);
+
+ if (!buf->output_buf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = buf->fill_func(buf);
+
+ if (ret >= 0) {
+ buf->count = ret;
+ ret = 0;
+ }
+
+out:
+ return ret;
+}
+
+static ssize_t debug_output(struct file *file, char __user *user_buf,
+ size_t len, loff_t *offset)
+{
+ struct debug_buffer *buf = file->private_data;
+ int ret = 0;
+
+ mutex_lock(&buf->mutex);
+ if (buf->count == 0) {
+ ret = fill_buffer(buf);
+ if (ret != 0) {
+ mutex_unlock(&buf->mutex);
+ goto out;
+ }
+ }
+ mutex_unlock(&buf->mutex);
+
+ ret = simple_read_from_buffer(user_buf, len, offset,
+ buf->output_buf, buf->count);
+
+out:
+ return ret;
+
+}
+
+static int debug_close(struct inode *inode, struct file *file)
+{
+ struct debug_buffer *buf = file->private_data;
+
+ if (buf) {
+ vfree(buf->output_buf);
+ kfree(buf);
+ }
+
+ return 0;
+}
+static int debug_async_open(struct inode *inode, struct file *file)
+{
+ file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
+
+ return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_periodic_open(struct inode *inode, struct file *file)
+{
+ struct debug_buffer *buf;
+ buf = alloc_buffer(inode->i_private, fill_periodic_buffer);
+ if (!buf)
+ return -ENOMEM;
+
+ buf->alloc_size = (sizeof(void *) == 4 ? 6 : 8)*PAGE_SIZE;
+ file->private_data = buf;
+ return 0;
+}
+
+static int debug_registers_open(struct inode *inode, struct file *file)
+{
+ file->private_data = alloc_buffer(inode->i_private,
+ fill_registers_buffer);
+
+ return file->private_data ? 0 : -ENOMEM;
+}
+
+static inline void create_debug_files (struct fusbh200_hcd *fusbh200)
+{
+ struct usb_bus *bus = &fusbh200_to_hcd(fusbh200)->self;
+
+ fusbh200->debug_dir = debugfs_create_dir(bus->bus_name, fusbh200_debug_root);
+ if (!fusbh200->debug_dir)
+ return;
+
+ if (!debugfs_create_file("async", S_IRUGO, fusbh200->debug_dir, bus,
+ &debug_async_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("periodic", S_IRUGO, fusbh200->debug_dir, bus,
+ &debug_periodic_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("registers", S_IRUGO, fusbh200->debug_dir, bus,
+ &debug_registers_fops))
+ goto file_error;
+
+ return;
+
+file_error:
+ debugfs_remove_recursive(fusbh200->debug_dir);
+}
+
+static inline void remove_debug_files (struct fusbh200_hcd *fusbh200)
+{
+ debugfs_remove_recursive(fusbh200->debug_dir);
+}
+
+#endif /* STUB_DEBUG_FILES */
+/*-------------------------------------------------------------------------*/
+
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done). There are two failure modes: "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown: shutting down the bridge before the devices using it.
+ */
+static int handshake (struct fusbh200_hcd *fusbh200, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = fusbh200_readl(fusbh200, ptr);
+ if (result == ~(u32)0) /* card removed */
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay (1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/*
+ * Force HC to halt state from unknown (EHCI spec section 2.3).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int fusbh200_halt (struct fusbh200_hcd *fusbh200)
+{
+ u32 temp;
+
+ spin_lock_irq(&fusbh200->lock);
+
+ /* disable any irqs left enabled by previous code */
+ fusbh200_writel(fusbh200, 0, &fusbh200->regs->intr_enable);
+
+ /*
+ * This routine gets called during probe before fusbh200->command
+ * has been initialized, so we can't rely on its value.
+ */
+ fusbh200->command &= ~CMD_RUN;
+ temp = fusbh200_readl(fusbh200, &fusbh200->regs->command);
+ temp &= ~(CMD_RUN | CMD_IAAD);
+ fusbh200_writel(fusbh200, temp, &fusbh200->regs->command);
+
+ spin_unlock_irq(&fusbh200->lock);
+ synchronize_irq(fusbh200_to_hcd(fusbh200)->irq);
+
+ return handshake(fusbh200, &fusbh200->regs->status,
+ STS_HALT, STS_HALT, 16 * 125);
+}
+
+/*
+ * Reset a non-running (STS_HALT == 1) controller.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int fusbh200_reset (struct fusbh200_hcd *fusbh200)
+{
+ int retval;
+ u32 command = fusbh200_readl(fusbh200, &fusbh200->regs->command);
+
+ /* If the EHCI debug controller is active, special care must be
+ * taken before and after a host controller reset */
+ if (fusbh200->debug && !dbgp_reset_prep(fusbh200_to_hcd(fusbh200)))
+ fusbh200->debug = NULL;
+
+ command |= CMD_RESET;
+ dbg_cmd (fusbh200, "reset", command);
+ fusbh200_writel(fusbh200, command, &fusbh200->regs->command);
+ fusbh200->rh_state = FUSBH200_RH_HALTED;
+ fusbh200->next_statechange = jiffies;
+ retval = handshake (fusbh200, &fusbh200->regs->command,
+ CMD_RESET, 0, 250 * 1000);
+
+ if (retval)
+ return retval;
+
+ if (fusbh200->debug)
+ dbgp_external_startup(fusbh200_to_hcd(fusbh200));
+
+ fusbh200->port_c_suspend = fusbh200->suspended_ports =
+ fusbh200->resuming_ports = 0;
+ return retval;
+}
+
+/*
+ * Idle the controller (turn off the schedules).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void fusbh200_quiesce (struct fusbh200_hcd *fusbh200)
+{
+ u32 temp;
+
+ if (fusbh200->rh_state != FUSBH200_RH_RUNNING)
+ return;
+
+ /* wait for any schedule enables/disables to take effect */
+ temp = (fusbh200->command << 10) & (STS_ASS | STS_PSS);
+ handshake(fusbh200, &fusbh200->regs->status, STS_ASS | STS_PSS, temp, 16 * 125);
+
+ /* then disable anything that's still active */
+ spin_lock_irq(&fusbh200->lock);
+ fusbh200->command &= ~(CMD_ASE | CMD_PSE);
+ fusbh200_writel(fusbh200, fusbh200->command, &fusbh200->regs->command);
+ spin_unlock_irq(&fusbh200->lock);
+
+ /* hardware can take 16 microframes to turn off ... */
+ handshake(fusbh200, &fusbh200->regs->status, STS_ASS | STS_PSS, 0, 16 * 125);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void end_unlink_async(struct fusbh200_hcd *fusbh200);
+static void unlink_empty_async(struct fusbh200_hcd *fusbh200);
+static void fusbh200_work(struct fusbh200_hcd *fusbh200);
+static void start_unlink_intr(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh);
+static void end_unlink_intr(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh);
+
+/*-------------------------------------------------------------------------*/
+
+/* Set a bit in the USBCMD register */
+static void fusbh200_set_command_bit(struct fusbh200_hcd *fusbh200, u32 bit)
+{
+ fusbh200->command |= bit;
+ fusbh200_writel(fusbh200, fusbh200->command, &fusbh200->regs->command);
+
+ /* unblock posted write */
+ fusbh200_readl(fusbh200, &fusbh200->regs->command);
+}
+
+/* Clear a bit in the USBCMD register */
+static void fusbh200_clear_command_bit(struct fusbh200_hcd *fusbh200, u32 bit)
+{
+ fusbh200->command &= ~bit;
+ fusbh200_writel(fusbh200, fusbh200->command, &fusbh200->regs->command);
+
+ /* unblock posted write */
+ fusbh200_readl(fusbh200, &fusbh200->regs->command);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI timer support... Now using hrtimers.
+ *
+ * Lots of different events are triggered from fusbh200->hrtimer. Whenever
+ * the timer routine runs, it checks each possible event; events that are
+ * currently enabled and whose expiration time has passed get handled.
+ * The set of enabled events is stored as a collection of bitflags in
+ * fusbh200->enabled_hrtimer_events, and they are numbered in order of
+ * increasing delay values (ranging between 1 ms and 100 ms).
+ *
+ * Rather than implementing a sorted list or tree of all pending events,
+ * we keep track only of the lowest-numbered pending event, in
+ * fusbh200->next_hrtimer_event. Whenever fusbh200->hrtimer gets restarted, its
+ * expiration time is set to the timeout value for this event.
+ *
+ * As a result, events might not get handled right away; the actual delay
+ * could be anywhere up to twice the requested delay. This doesn't
+ * matter, because none of the events are especially time-critical. The
+ * ones that matter most all have a delay of 1 ms, so they will be
+ * handled after 2 ms at most, which is okay. In addition to this, we
+ * allow for an expiration range of 1 ms.
+ */
+
+/*
+ * Delay lengths for the hrtimer event types.
+ * Keep this list sorted by delay length, in the same order as
+ * the event types indexed by enum fusbh200_hrtimer_event in fusbh200.h.
+ */
+static unsigned event_delays_ns[] = {
+ 1 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_POLL_ASS */
+ 1 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_POLL_PSS */
+ 1 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_POLL_DEAD */
+ 1125 * NSEC_PER_USEC, /* FUSBH200_HRTIMER_UNLINK_INTR */
+ 2 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_FREE_ITDS */
+ 6 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_ASYNC_UNLINKS */
+ 10 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_IAA_WATCHDOG */
+ 10 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_DISABLE_PERIODIC */
+ 15 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_DISABLE_ASYNC */
+ 100 * NSEC_PER_MSEC, /* FUSBH200_HRTIMER_IO_WATCHDOG */
+};
+
+/* Enable a pending hrtimer event */
+static void fusbh200_enable_event(struct fusbh200_hcd *fusbh200, unsigned event,
+ bool resched)
+{
+ ktime_t *timeout = &fusbh200->hr_timeouts[event];
+
+ if (resched)
+ *timeout = ktime_add(ktime_get(),
+ ktime_set(0, event_delays_ns[event]));
+ fusbh200->enabled_hrtimer_events |= (1 << event);
+
+ /* Track only the lowest-numbered pending event */
+ if (event < fusbh200->next_hrtimer_event) {
+ fusbh200->next_hrtimer_event = event;
+ hrtimer_start_range_ns(&fusbh200->hrtimer, *timeout,
+ NSEC_PER_MSEC, HRTIMER_MODE_ABS);
+ }
+}
+
+
+/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */
+static void fusbh200_poll_ASS(struct fusbh200_hcd *fusbh200)
+{
+ unsigned actual, want;
+
+ /* Don't enable anything if the controller isn't running (e.g., died) */
+ if (fusbh200->rh_state != FUSBH200_RH_RUNNING)
+ return;
+
+ want = (fusbh200->command & CMD_ASE) ? STS_ASS : 0;
+ actual = fusbh200_readl(fusbh200, &fusbh200->regs->status) & STS_ASS;
+
+ if (want != actual) {
+
+ /* Poll again later, but give up after about 20 ms */
+ if (fusbh200->ASS_poll_count++ < 20) {
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_POLL_ASS, true);
+ return;
+ }
+ fusbh200_dbg(fusbh200, "Waited too long for the async schedule status (%x/%x), giving up\n",
+ want, actual);
+ }
+ fusbh200->ASS_poll_count = 0;
+
+ /* The status is up-to-date; restart or stop the schedule as needed */
+ if (want == 0) { /* Stopped */
+ if (fusbh200->async_count > 0)
+ fusbh200_set_command_bit(fusbh200, CMD_ASE);
+
+ } else { /* Running */
+ if (fusbh200->async_count == 0) {
+
+ /* Turn off the schedule after a while */
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_DISABLE_ASYNC,
+ true);
+ }
+ }
+}
+
+/* Turn off the async schedule after a brief delay */
+static void fusbh200_disable_ASE(struct fusbh200_hcd *fusbh200)
+{
+ fusbh200_clear_command_bit(fusbh200, CMD_ASE);
+}
+
+
+/* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */
+static void fusbh200_poll_PSS(struct fusbh200_hcd *fusbh200)
+{
+ unsigned actual, want;
+
+ /* Don't do anything if the controller isn't running (e.g., died) */
+ if (fusbh200->rh_state != FUSBH200_RH_RUNNING)
+ return;
+
+ want = (fusbh200->command & CMD_PSE) ? STS_PSS : 0;
+ actual = fusbh200_readl(fusbh200, &fusbh200->regs->status) & STS_PSS;
+
+ if (want != actual) {
+
+ /* Poll again later, but give up after about 20 ms */
+ if (fusbh200->PSS_poll_count++ < 20) {
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_POLL_PSS, true);
+ return;
+ }
+ fusbh200_dbg(fusbh200, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
+ want, actual);
+ }
+ fusbh200->PSS_poll_count = 0;
+
+ /* The status is up-to-date; restart or stop the schedule as needed */
+ if (want == 0) { /* Stopped */
+ if (fusbh200->periodic_count > 0)
+ fusbh200_set_command_bit(fusbh200, CMD_PSE);
+
+ } else { /* Running */
+ if (fusbh200->periodic_count == 0) {
+
+ /* Turn off the schedule after a while */
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_DISABLE_PERIODIC,
+ true);
+ }
+ }
+}
+
+/* Turn off the periodic schedule after a brief delay */
+static void fusbh200_disable_PSE(struct fusbh200_hcd *fusbh200)
+{
+ fusbh200_clear_command_bit(fusbh200, CMD_PSE);
+}
+
+
+/* Poll the STS_HALT status bit; see when a dead controller stops */
+static void fusbh200_handle_controller_death(struct fusbh200_hcd *fusbh200)
+{
+ if (!(fusbh200_readl(fusbh200, &fusbh200->regs->status) & STS_HALT)) {
+
+ /* Give up after a few milliseconds */
+ if (fusbh200->died_poll_count++ < 5) {
+ /* Try again later */
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_POLL_DEAD, true);
+ return;
+ }
+ fusbh200_warn(fusbh200, "Waited too long for the controller to stop, giving up\n");
+ }
+
+ /* Clean up the mess */
+ fusbh200->rh_state = FUSBH200_RH_HALTED;
+ fusbh200_writel(fusbh200, 0, &fusbh200->regs->intr_enable);
+ fusbh200_work(fusbh200);
+ end_unlink_async(fusbh200);
+
+ /* Not in process context, so don't try to reset the controller */
+}
+
+
+/* Handle unlinked interrupt QHs once they are gone from the hardware */
+static void fusbh200_handle_intr_unlinks(struct fusbh200_hcd *fusbh200)
+{
+ bool stopped = (fusbh200->rh_state < FUSBH200_RH_RUNNING);
+
+ /*
+ * Process all the QHs on the intr_unlink list that were added
+ * before the current unlink cycle began. The list is in
+ * temporal order, so stop when we reach the first entry in the
+ * current cycle. But if the root hub isn't running then
+ * process all the QHs on the list.
+ */
+ fusbh200->intr_unlinking = true;
+ while (fusbh200->intr_unlink) {
+ struct fusbh200_qh *qh = fusbh200->intr_unlink;
+
+ if (!stopped && qh->unlink_cycle == fusbh200->intr_unlink_cycle)
+ break;
+ fusbh200->intr_unlink = qh->unlink_next;
+ qh->unlink_next = NULL;
+ end_unlink_intr(fusbh200, qh);
+ }
+
+ /* Handle remaining entries later */
+ if (fusbh200->intr_unlink) {
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_UNLINK_INTR, true);
+ ++fusbh200->intr_unlink_cycle;
+ }
+ fusbh200->intr_unlinking = false;
+}
+
+
+/* Start another free-iTDs/siTDs cycle */
+static void start_free_itds(struct fusbh200_hcd *fusbh200)
+{
+ if (!(fusbh200->enabled_hrtimer_events & BIT(FUSBH200_HRTIMER_FREE_ITDS))) {
+ fusbh200->last_itd_to_free = list_entry(
+ fusbh200->cached_itd_list.prev,
+ struct fusbh200_itd, itd_list);
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_FREE_ITDS, true);
+ }
+}
+
+/* Wait for controller to stop using old iTDs and siTDs */
+static void end_free_itds(struct fusbh200_hcd *fusbh200)
+{
+ struct fusbh200_itd *itd, *n;
+
+ if (fusbh200->rh_state < FUSBH200_RH_RUNNING) {
+ fusbh200->last_itd_to_free = NULL;
+ }
+
+ list_for_each_entry_safe(itd, n, &fusbh200->cached_itd_list, itd_list) {
+ list_del(&itd->itd_list);
+ dma_pool_free(fusbh200->itd_pool, itd, itd->itd_dma);
+ if (itd == fusbh200->last_itd_to_free)
+ break;
+ }
+
+ if (!list_empty(&fusbh200->cached_itd_list))
+ start_free_itds(fusbh200);
+}
+
+
+/* Handle lost (or very late) IAA interrupts */
+static void fusbh200_iaa_watchdog(struct fusbh200_hcd *fusbh200)
+{
+ if (fusbh200->rh_state != FUSBH200_RH_RUNNING)
+ return;
+
+ /*
+ * Lost IAA irqs wedge things badly; seen first with a vt8235.
+ * So we need this watchdog, but must protect it against both
+ * (a) SMP races against real IAA firing and retriggering, and
+ * (b) clean HC shutdown, when IAA watchdog was pending.
+ */
+ if (fusbh200->async_iaa) {
+ u32 cmd, status;
+
+ /* If we get here, IAA is *REALLY* late. It's barely
+ * conceivable that the system is so busy that CMD_IAAD
+ * is still legitimately set, so let's be sure it's
+ * clear before we read STS_IAA. (The HC should clear
+ * CMD_IAAD when it sets STS_IAA.)
+ */
+ cmd = fusbh200_readl(fusbh200, &fusbh200->regs->command);
+
+ /*
+ * If IAA is set here it either legitimately triggered
+ * after the watchdog timer expired (_way_ late, so we'll
+ * still count it as lost) ... or a silicon erratum:
+ * - VIA seems to set IAA without triggering the IRQ;
+ * - IAAD potentially cleared without setting IAA.
+ */
+ status = fusbh200_readl(fusbh200, &fusbh200->regs->status);
+ if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
+ COUNT(fusbh200->stats.lost_iaa);
+ fusbh200_writel(fusbh200, STS_IAA, &fusbh200->regs->status);
+ }
+
+ fusbh200_vdbg(fusbh200, "IAA watchdog: status %x cmd %x\n",
+ status, cmd);
+ end_unlink_async(fusbh200);
+ }
+}
+
+
+/* Enable the I/O watchdog, if appropriate */
+static void turn_on_io_watchdog(struct fusbh200_hcd *fusbh200)
+{
+ /* Not needed if the controller isn't running or it's already enabled */
+ if (fusbh200->rh_state != FUSBH200_RH_RUNNING ||
+ (fusbh200->enabled_hrtimer_events &
+ BIT(FUSBH200_HRTIMER_IO_WATCHDOG)))
+ return;
+
+ /*
+ * Isochronous transfers always need the watchdog.
+ * For other sorts we use it only if the flag is set.
+ */
+ if (fusbh200->isoc_count > 0 || (fusbh200->need_io_watchdog &&
+ fusbh200->async_count + fusbh200->intr_count > 0))
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_IO_WATCHDOG, true);
+}
+
+
+/*
+ * Handler functions for the hrtimer event types.
+ * Keep this array in the same order as the event types indexed by
+ * enum fusbh200_hrtimer_event in fusbh200.h.
+ */
+static void (*event_handlers[])(struct fusbh200_hcd *) = {
+ fusbh200_poll_ASS, /* FUSBH200_HRTIMER_POLL_ASS */
+ fusbh200_poll_PSS, /* FUSBH200_HRTIMER_POLL_PSS */
+ fusbh200_handle_controller_death, /* FUSBH200_HRTIMER_POLL_DEAD */
+ fusbh200_handle_intr_unlinks, /* FUSBH200_HRTIMER_UNLINK_INTR */
+ end_free_itds, /* FUSBH200_HRTIMER_FREE_ITDS */
+ unlink_empty_async, /* FUSBH200_HRTIMER_ASYNC_UNLINKS */
+ fusbh200_iaa_watchdog, /* FUSBH200_HRTIMER_IAA_WATCHDOG */
+ fusbh200_disable_PSE, /* FUSBH200_HRTIMER_DISABLE_PERIODIC */
+ fusbh200_disable_ASE, /* FUSBH200_HRTIMER_DISABLE_ASYNC */
+ fusbh200_work, /* FUSBH200_HRTIMER_IO_WATCHDOG */
+};
+
+static enum hrtimer_restart fusbh200_hrtimer_func(struct hrtimer *t)
+{
+ struct fusbh200_hcd *fusbh200 = container_of(t, struct fusbh200_hcd, hrtimer);
+ ktime_t now;
+ unsigned long events;
+ unsigned long flags;
+ unsigned e;
+
+ spin_lock_irqsave(&fusbh200->lock, flags);
+
+ events = fusbh200->enabled_hrtimer_events;
+ fusbh200->enabled_hrtimer_events = 0;
+ fusbh200->next_hrtimer_event = FUSBH200_HRTIMER_NO_EVENT;
+
+ /*
+ * Check each pending event. If its time has expired, handle
+ * the event; otherwise re-enable it.
+ */
+ now = ktime_get();
+ for_each_set_bit(e, &events, FUSBH200_HRTIMER_NUM_EVENTS) {
+ if (now.tv64 >= fusbh200->hr_timeouts[e].tv64)
+ event_handlers[e](fusbh200);
+ else
+ fusbh200_enable_event(fusbh200, e, false);
+ }
+
+ spin_unlock_irqrestore(&fusbh200->lock, flags);
+ return HRTIMER_NORESTART;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define fusbh200_bus_suspend NULL
+#define fusbh200_bus_resume NULL
+
+/*-------------------------------------------------------------------------*/
+
+static int check_reset_complete (
+ struct fusbh200_hcd *fusbh200,
+ int index,
+ u32 __iomem *status_reg,
+ int port_status
+) {
+ if (!(port_status & PORT_CONNECT))
+ return port_status;
+
+ /* if reset finished and it's still not enabled -- handoff */
+ if (!(port_status & PORT_PE)) {
+ /* with integrated TT, there's nobody to hand it to! */
+ fusbh200_dbg (fusbh200,
+ "Failed to enable port %d on root hub TT\n",
+ index+1);
+ return port_status;
+ } else {
+ fusbh200_dbg(fusbh200, "port %d reset complete, port enabled\n",
+ index + 1);
+ }
+
+ return port_status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+fusbh200_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ u32 temp, status;
+ u32 mask;
+ int retval = 1;
+ unsigned long flags;
+
+ /* init status to no-changes */
+ buf [0] = 0;
+
+ /* Inform the core about resumes-in-progress by returning
+ * a non-zero value even if there are no status changes.
+ */
+ status = fusbh200->resuming_ports;
+
+ mask = PORT_CSC | PORT_PEC;
+ // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
+ /* no hub change reports (bit 0) for now (power, ...) */
+
+ /* port N changes (bit N)? */
+ spin_lock_irqsave (&fusbh200->lock, flags);
+
+ temp = fusbh200_readl(fusbh200, &fusbh200->regs->port_status);
+
+ /*
+ * Return status information even for ports with OWNER set.
+ * Otherwise khubd wouldn't see the disconnect event when a
+ * high-speed device is switched over to the companion
+ * controller by the user.
+ */
+
+ if ((temp & mask) != 0 || test_bit(0, &fusbh200->port_c_suspend)
+ || (fusbh200->reset_done[0] && time_after_eq(
+ jiffies, fusbh200->reset_done[0]))) {
+ buf [0] |= 1 << 1;
+ status = STS_PCD;
+ }
+ /* FIXME autosuspend idle root hubs */
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ return status ? retval : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+fusbh200_hub_descriptor (
+ struct fusbh200_hcd *fusbh200,
+ struct usb_hub_descriptor *desc
+) {
+ int ports = HCS_N_PORTS (fusbh200->hcs_params);
+ u16 temp;
+
+ desc->bDescriptorType = 0x29;
+ desc->bPwrOn2PwrGood = 10; /* fusbh200 1.0, 2.3.9 says 20ms max */
+ desc->bHubContrCurrent = 0;
+
+ desc->bNbrPorts = ports;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+ memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+ memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+ temp = 0x0008; /* per-port overcurrent reporting */
+ temp |= 0x0002; /* no power switching */
+ desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int fusbh200_hub_control (
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+) {
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ int ports = HCS_N_PORTS (fusbh200->hcs_params);
+ u32 __iomem *status_reg = &fusbh200->regs->port_status;
+ u32 temp, temp1, status;
+ unsigned long flags;
+ int retval = 0;
+ unsigned selector;
+
+ /*
+ * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+ * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+ * (track current state ourselves) ... blink for diagnostics,
+ * power, "this is the one", etc. EHCI spec supports this.
+ */
+
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = fusbh200_readl(fusbh200, status_reg);
+ temp &= ~PORT_RWC_BITS;
+
+ /*
+ * Even if OWNER is set, so the port is owned by the
+ * companion controller, khubd needs to be able to clear
+ * the port-change status bits (especially
+ * USB_PORT_STAT_C_CONNECTION).
+ */
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ fusbh200_writel(fusbh200, temp & ~PORT_PE, status_reg);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ fusbh200_writel(fusbh200, temp | PORT_PEC, status_reg);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ if (temp & PORT_RESET)
+ goto error;
+ if (!(temp & PORT_SUSPEND))
+ break;
+ if ((temp & PORT_PE) == 0)
+ goto error;
+
+ /* resume signaling for 20 msec */
+ fusbh200_writel(fusbh200, temp | PORT_RESUME, status_reg);
+ fusbh200->reset_done[wIndex] = jiffies
+ + msecs_to_jiffies(20);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ clear_bit(wIndex, &fusbh200->port_c_suspend);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ fusbh200_writel(fusbh200, temp | PORT_CSC, status_reg);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ fusbh200_writel(fusbh200, temp | BMISR_OVC, &fusbh200->regs->bmisr);
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ /* GetPortStatus clears reset */
+ break;
+ default:
+ goto error;
+ }
+ fusbh200_readl(fusbh200, &fusbh200->regs->command); /* unblock posted write */
+ break;
+ case GetHubDescriptor:
+ fusbh200_hub_descriptor (fusbh200, (struct usb_hub_descriptor *)
+ buf);
+ break;
+ case GetHubStatus:
+ /* no hub-wide feature/status flags */
+ memset (buf, 0, 4);
+ //cpu_to_le32s ((u32 *) buf);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ status = 0;
+ temp = fusbh200_readl(fusbh200, status_reg);
+
+ // wPortChange bits
+ if (temp & PORT_CSC)
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
+ if (temp & PORT_PEC)
+ status |= USB_PORT_STAT_C_ENABLE << 16;
+
+ temp1 = fusbh200_readl(fusbh200, &fusbh200->regs->bmisr);
+ if (temp1 & BMISR_OVC)
+ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+
+ /* whoever resumes must GetPortStatus to complete it!! */
+ if (temp & PORT_RESUME) {
+
+ /* Remote Wakeup received? */
+ if (!fusbh200->reset_done[wIndex]) {
+ /* resume signaling for 20 msec */
+ fusbh200->reset_done[wIndex] = jiffies
+ + msecs_to_jiffies(20);
+ /* check the port again */
+ mod_timer(&fusbh200_to_hcd(fusbh200)->rh_timer,
+ fusbh200->reset_done[wIndex]);
+ }
+
+ /* resume completed? */
+ else if (time_after_eq(jiffies,
+ fusbh200->reset_done[wIndex])) {
+ clear_bit(wIndex, &fusbh200->suspended_ports);
+ set_bit(wIndex, &fusbh200->port_c_suspend);
+ fusbh200->reset_done[wIndex] = 0;
+
+ /* stop resume signaling */
+ temp = fusbh200_readl(fusbh200, status_reg);
+ fusbh200_writel(fusbh200,
+ temp & ~(PORT_RWC_BITS | PORT_RESUME),
+ status_reg);
+ clear_bit(wIndex, &fusbh200->resuming_ports);
+ retval = handshake(fusbh200, status_reg,
+ PORT_RESUME, 0, 2000 /* 2msec */);
+ if (retval != 0) {
+ fusbh200_err(fusbh200,
+ "port %d resume error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+ temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+ }
+ }
+
+ /* whoever resets must GetPortStatus to complete it!! */
+ if ((temp & PORT_RESET)
+ && time_after_eq(jiffies,
+ fusbh200->reset_done[wIndex])) {
+ status |= USB_PORT_STAT_C_RESET << 16;
+ fusbh200->reset_done [wIndex] = 0;
+ clear_bit(wIndex, &fusbh200->resuming_ports);
+
+ /* force reset to complete */
+ fusbh200_writel(fusbh200, temp & ~(PORT_RWC_BITS | PORT_RESET),
+ status_reg);
+ /* REVISIT: some hardware needs 550+ usec to clear
+ * this bit; seems too long to spin routinely...
+ */
+ retval = handshake(fusbh200, status_reg,
+ PORT_RESET, 0, 1000);
+ if (retval != 0) {
+ fusbh200_err (fusbh200, "port %d reset error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+
+ /* see what we found out */
+ temp = check_reset_complete (fusbh200, wIndex, status_reg,
+ fusbh200_readl(fusbh200, status_reg));
+ }
+
+ if (!(temp & (PORT_RESUME|PORT_RESET))) {
+ fusbh200->reset_done[wIndex] = 0;
+ clear_bit(wIndex, &fusbh200->resuming_ports);
+ }
+
+ /* transfer dedicated ports to the companion hc */
+ if ((temp & PORT_CONNECT) &&
+ test_bit(wIndex, &fusbh200->companion_ports)) {
+ temp &= ~PORT_RWC_BITS;
+ fusbh200_writel(fusbh200, temp, status_reg);
+ fusbh200_dbg(fusbh200, "port %d --> companion\n", wIndex + 1);
+ temp = fusbh200_readl(fusbh200, status_reg);
+ }
+
+ /*
+ * Even if OWNER is set, there's no harm letting khubd
+ * see the wPortStatus values (they should all be 0 except
+ * for PORT_POWER anyway).
+ */
+
+ if (temp & PORT_CONNECT) {
+ status |= USB_PORT_STAT_CONNECTION;
+ status |= fusbh200_port_speed(fusbh200, temp);
+ }
+ if (temp & PORT_PE)
+ status |= USB_PORT_STAT_ENABLE;
+
+ /* maybe the port was unsuspended without our knowledge */
+ if (temp & (PORT_SUSPEND|PORT_RESUME)) {
+ status |= USB_PORT_STAT_SUSPEND;
+ } else if (test_bit(wIndex, &fusbh200->suspended_ports)) {
+ clear_bit(wIndex, &fusbh200->suspended_ports);
+ clear_bit(wIndex, &fusbh200->resuming_ports);
+ fusbh200->reset_done[wIndex] = 0;
+ if (temp & PORT_PE)
+ set_bit(wIndex, &fusbh200->port_c_suspend);
+ }
+
+ temp1 = fusbh200_readl(fusbh200, &fusbh200->regs->bmisr);
+ if (temp1 & BMISR_OVC)
+ status |= USB_PORT_STAT_OVERCURRENT;
+ if (temp & PORT_RESET)
+ status |= USB_PORT_STAT_RESET;
+ if (test_bit(wIndex, &fusbh200->port_c_suspend))
+ status |= USB_PORT_STAT_C_SUSPEND << 16;
+
+#ifndef VERBOSE_DEBUG
+ if (status & ~0xffff) /* only if wPortChange is interesting */
+#endif
+ dbg_port (fusbh200, "GetStatus", wIndex + 1, temp);
+ put_unaligned_le32(status, buf);
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
+
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = fusbh200_readl(fusbh200, status_reg);
+ temp &= ~PORT_RWC_BITS;
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ if ((temp & PORT_PE) == 0
+ || (temp & PORT_RESET) != 0)
+ goto error;
+
+ /* After above check the port must be connected.
+ * Set appropriate bit thus could put phy into low power
+ * mode if we have hostpc feature
+ */
+ fusbh200_writel(fusbh200, temp | PORT_SUSPEND, status_reg);
+ set_bit(wIndex, &fusbh200->suspended_ports);
+ break;
+ case USB_PORT_FEAT_RESET:
+ if (temp & PORT_RESUME)
+ goto error;
+ /* line status bits may report this as low speed,
+ * which can be fine if this root hub has a
+ * transaction translator built in.
+ */
+ fusbh200_vdbg (fusbh200, "port %d reset\n", wIndex + 1);
+ temp |= PORT_RESET;
+ temp &= ~PORT_PE;
+
+ /*
+ * caller must wait, then call GetPortStatus
+ * usb 2.0 spec says 50 ms resets on root
+ */
+ fusbh200->reset_done [wIndex] = jiffies
+ + msecs_to_jiffies (50);
+ fusbh200_writel(fusbh200, temp, status_reg);
+ break;
+
+ /* For downstream facing ports (these): one hub port is put
+ * into test mode according to USB2 11.24.2.13, then the hub
+ * must be reset (which for root hub now means rmmod+modprobe,
+ * or else system reboot). See EHCI 2.3.9 and 4.14 for info
+ * about the EHCI-specific stuff.
+ */
+ case USB_PORT_FEAT_TEST:
+ if (!selector || selector > 5)
+ goto error;
+ spin_unlock_irqrestore(&fusbh200->lock, flags);
+ fusbh200_quiesce(fusbh200);
+ spin_lock_irqsave(&fusbh200->lock, flags);
+
+ /* Put all enabled ports into suspend */
+ temp = fusbh200_readl(fusbh200, status_reg) & ~PORT_RWC_BITS;
+ if (temp & PORT_PE)
+ fusbh200_writel(fusbh200, temp | PORT_SUSPEND,
+ status_reg);
+
+ spin_unlock_irqrestore(&fusbh200->lock, flags);
+ fusbh200_halt(fusbh200);
+ spin_lock_irqsave(&fusbh200->lock, flags);
+
+ temp = fusbh200_readl(fusbh200, status_reg);
+ temp |= selector << 16;
+ fusbh200_writel(fusbh200, temp, status_reg);
+ break;
+
+ default:
+ goto error;
+ }
+ fusbh200_readl(fusbh200, &fusbh200->regs->command); /* unblock posted writes */
+ break;
+
+ default:
+error:
+ /* "stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ return retval;
+}
+
+static void __maybe_unused fusbh200_relinquish_port(struct usb_hcd *hcd,
+ int portnum)
+{
+ return;
+}
+
+static int __maybe_unused fusbh200_port_handed_over(struct usb_hcd *hcd,
+ int portnum)
+{
+ return 0;
+}
+/*-------------------------------------------------------------------------*/
+/*
+ * There's basically three types of memory:
+ * - data used only by the HCD ... kmalloc is fine
+ * - async and periodic schedules, shared by HC and HCD ... these
+ * need to use dma_pool or dma_alloc_coherent
+ * - driver buffers, read/written by HC ... single shot DMA mapped
+ *
+ * There's also "register" data (e.g. PCI or SOC), which is memory mapped.
+ * No memory seen by this driver is pageable.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* Allocate the key transfer structures from the previously allocated pool */
+
+static inline void fusbh200_qtd_init(struct fusbh200_hcd *fusbh200, struct fusbh200_qtd *qtd,
+ dma_addr_t dma)
+{
+ memset (qtd, 0, sizeof *qtd);
+ qtd->qtd_dma = dma;
+ qtd->hw_token = cpu_to_hc32(fusbh200, QTD_STS_HALT);
+ qtd->hw_next = FUSBH200_LIST_END(fusbh200);
+ qtd->hw_alt_next = FUSBH200_LIST_END(fusbh200);
+ INIT_LIST_HEAD (&qtd->qtd_list);
+}
+
+static struct fusbh200_qtd *fusbh200_qtd_alloc (struct fusbh200_hcd *fusbh200, gfp_t flags)
+{
+ struct fusbh200_qtd *qtd;
+ dma_addr_t dma;
+
+ qtd = dma_pool_alloc (fusbh200->qtd_pool, flags, &dma);
+ if (qtd != NULL) {
+ fusbh200_qtd_init(fusbh200, qtd, dma);
+ }
+ return qtd;
+}
+
+static inline void fusbh200_qtd_free (struct fusbh200_hcd *fusbh200, struct fusbh200_qtd *qtd)
+{
+ dma_pool_free (fusbh200->qtd_pool, qtd, qtd->qtd_dma);
+}
+
+
+static void qh_destroy(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ /* clean qtds first, and know this is not linked */
+ if (!list_empty (&qh->qtd_list) || qh->qh_next.ptr) {
+ fusbh200_dbg (fusbh200, "unused qh not empty!\n");
+ BUG ();
+ }
+ if (qh->dummy)
+ fusbh200_qtd_free (fusbh200, qh->dummy);
+ dma_pool_free(fusbh200->qh_pool, qh->hw, qh->qh_dma);
+ kfree(qh);
+}
+
+static struct fusbh200_qh *fusbh200_qh_alloc (struct fusbh200_hcd *fusbh200, gfp_t flags)
+{
+ struct fusbh200_qh *qh;
+ dma_addr_t dma;
+
+ qh = kzalloc(sizeof *qh, GFP_ATOMIC);
+ if (!qh)
+ goto done;
+ qh->hw = (struct fusbh200_qh_hw *)
+ dma_pool_alloc(fusbh200->qh_pool, flags, &dma);
+ if (!qh->hw)
+ goto fail;
+ memset(qh->hw, 0, sizeof *qh->hw);
+ qh->qh_dma = dma;
+ // INIT_LIST_HEAD (&qh->qh_list);
+ INIT_LIST_HEAD (&qh->qtd_list);
+
+ /* dummy td enables safe urb queuing */
+ qh->dummy = fusbh200_qtd_alloc (fusbh200, flags);
+ if (qh->dummy == NULL) {
+ fusbh200_dbg (fusbh200, "no dummy td\n");
+ goto fail1;
+ }
+done:
+ return qh;
+fail1:
+ dma_pool_free(fusbh200->qh_pool, qh->hw, qh->qh_dma);
+fail:
+ kfree(qh);
+ return NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* The queue heads and transfer descriptors are managed from pools tied
+ * to each of the "per device" structures.
+ * This is the initialisation and cleanup code.
+ */
+
+static void fusbh200_mem_cleanup (struct fusbh200_hcd *fusbh200)
+{
+ if (fusbh200->async)
+ qh_destroy(fusbh200, fusbh200->async);
+ fusbh200->async = NULL;
+
+ if (fusbh200->dummy)
+ qh_destroy(fusbh200, fusbh200->dummy);
+ fusbh200->dummy = NULL;
+
+ /* DMA consistent memory and pools */
+ if (fusbh200->qtd_pool)
+ dma_pool_destroy (fusbh200->qtd_pool);
+ fusbh200->qtd_pool = NULL;
+
+ if (fusbh200->qh_pool) {
+ dma_pool_destroy (fusbh200->qh_pool);
+ fusbh200->qh_pool = NULL;
+ }
+
+ if (fusbh200->itd_pool)
+ dma_pool_destroy (fusbh200->itd_pool);
+ fusbh200->itd_pool = NULL;
+
+ if (fusbh200->periodic)
+ dma_free_coherent (fusbh200_to_hcd(fusbh200)->self.controller,
+ fusbh200->periodic_size * sizeof (u32),
+ fusbh200->periodic, fusbh200->periodic_dma);
+ fusbh200->periodic = NULL;
+
+ /* shadow periodic table */
+ kfree(fusbh200->pshadow);
+ fusbh200->pshadow = NULL;
+}
+
+/* remember to add cleanup code (above) if you add anything here */
+static int fusbh200_mem_init (struct fusbh200_hcd *fusbh200, gfp_t flags)
+{
+ int i;
+
+ /* QTDs for control/bulk/intr transfers */
+ fusbh200->qtd_pool = dma_pool_create ("fusbh200_qtd",
+ fusbh200_to_hcd(fusbh200)->self.controller,
+ sizeof (struct fusbh200_qtd),
+ 32 /* byte alignment (for hw parts) */,
+ 4096 /* can't cross 4K */);
+ if (!fusbh200->qtd_pool) {
+ goto fail;
+ }
+
+ /* QHs for control/bulk/intr transfers */
+ fusbh200->qh_pool = dma_pool_create ("fusbh200_qh",
+ fusbh200_to_hcd(fusbh200)->self.controller,
+ sizeof(struct fusbh200_qh_hw),
+ 32 /* byte alignment (for hw parts) */,
+ 4096 /* can't cross 4K */);
+ if (!fusbh200->qh_pool) {
+ goto fail;
+ }
+ fusbh200->async = fusbh200_qh_alloc (fusbh200, flags);
+ if (!fusbh200->async) {
+ goto fail;
+ }
+
+ /* ITD for high speed ISO transfers */
+ fusbh200->itd_pool = dma_pool_create ("fusbh200_itd",
+ fusbh200_to_hcd(fusbh200)->self.controller,
+ sizeof (struct fusbh200_itd),
+ 64 /* byte alignment (for hw parts) */,
+ 4096 /* can't cross 4K */);
+ if (!fusbh200->itd_pool) {
+ goto fail;
+ }
+
+ /* Hardware periodic table */
+ fusbh200->periodic = (__le32 *)
+ dma_alloc_coherent (fusbh200_to_hcd(fusbh200)->self.controller,
+ fusbh200->periodic_size * sizeof(__le32),
+ &fusbh200->periodic_dma, 0);
+ if (fusbh200->periodic == NULL) {
+ goto fail;
+ }
+
+ for (i = 0; i < fusbh200->periodic_size; i++)
+ fusbh200->periodic[i] = FUSBH200_LIST_END(fusbh200);
+
+ /* software shadow of hardware table */
+ fusbh200->pshadow = kcalloc(fusbh200->periodic_size, sizeof(void *), flags);
+ if (fusbh200->pshadow != NULL)
+ return 0;
+
+fail:
+ fusbh200_dbg (fusbh200, "couldn't init memory\n");
+ fusbh200_mem_cleanup (fusbh200);
+ return -ENOMEM;
+}
+/*-------------------------------------------------------------------------*/
+/*
+ * EHCI hardware queue manipulation ... the core. QH/QTD manipulation.
+ *
+ * Control, bulk, and interrupt traffic all use "qh" lists. They list "qtd"
+ * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned
+ * buffers needed for the larger number). We use one QH per endpoint, queue
+ * multiple urbs (all three types) per endpoint. URBs may need several qtds.
+ *
+ * ISO traffic uses "ISO TD" (itd) records, and (along with
+ * interrupts) needs careful scheduling. Performance improvements can be
+ * an ongoing challenge. That's in "ehci-sched.c".
+ *
+ * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
+ * or otherwise through transaction translators (TTs) in USB 2.0 hubs using
+ * (b) special fields in qh entries or (c) split iso entries. TTs will
+ * buffer low/full speed data so the host collects it at high speed.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* fill a qtd, returning how much of the buffer we were able to queue up */
+
+static int
+qtd_fill(struct fusbh200_hcd *fusbh200, struct fusbh200_qtd *qtd, dma_addr_t buf,
+ size_t len, int token, int maxpacket)
+{
+ int i, count;
+ u64 addr = buf;
+
+ /* one buffer entry per 4K ... first might be short or unaligned */
+ qtd->hw_buf[0] = cpu_to_hc32(fusbh200, (u32)addr);
+ qtd->hw_buf_hi[0] = cpu_to_hc32(fusbh200, (u32)(addr >> 32));
+ count = 0x1000 - (buf & 0x0fff); /* rest of that page */
+ if (likely (len < count)) /* ... iff needed */
+ count = len;
+ else {
+ buf += 0x1000;
+ buf &= ~0x0fff;
+
+ /* per-qtd limit: from 16K to 20K (best alignment) */
+ for (i = 1; count < len && i < 5; i++) {
+ addr = buf;
+ qtd->hw_buf[i] = cpu_to_hc32(fusbh200, (u32)addr);
+ qtd->hw_buf_hi[i] = cpu_to_hc32(fusbh200,
+ (u32)(addr >> 32));
+ buf += 0x1000;
+ if ((count + 0x1000) < len)
+ count += 0x1000;
+ else
+ count = len;
+ }
+
+ /* short packets may only terminate transfers */
+ if (count != len)
+ count -= (count % maxpacket);
+ }
+ qtd->hw_token = cpu_to_hc32(fusbh200, (count << 16) | token);
+ qtd->length = count;
+
+ return count;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void
+qh_update (struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh, struct fusbh200_qtd *qtd)
+{
+ struct fusbh200_qh_hw *hw = qh->hw;
+
+ /* writes to an active overlay are unsafe */
+ BUG_ON(qh->qh_state != QH_STATE_IDLE);
+
+ hw->hw_qtd_next = QTD_NEXT(fusbh200, qtd->qtd_dma);
+ hw->hw_alt_next = FUSBH200_LIST_END(fusbh200);
+
+ /* Except for control endpoints, we make hardware maintain data
+ * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+ * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+ * ever clear it.
+ */
+ if (!(hw->hw_info1 & cpu_to_hc32(fusbh200, QH_TOGGLE_CTL))) {
+ unsigned is_out, epnum;
+
+ is_out = qh->is_out;
+ epnum = (hc32_to_cpup(fusbh200, &hw->hw_info1) >> 8) & 0x0f;
+ if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+ hw->hw_token &= ~cpu_to_hc32(fusbh200, QTD_TOGGLE);
+ usb_settoggle (qh->dev, epnum, is_out, 1);
+ }
+ }
+
+ hw->hw_token &= cpu_to_hc32(fusbh200, QTD_TOGGLE | QTD_STS_PING);
+}
+
+/* if it weren't for a common silicon quirk (writing the dummy into the qh
+ * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
+ * recovery (including urb dequeue) would need software changes to a QH...
+ */
+static void
+qh_refresh (struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ struct fusbh200_qtd *qtd;
+
+ if (list_empty (&qh->qtd_list))
+ qtd = qh->dummy;
+ else {
+ qtd = list_entry (qh->qtd_list.next,
+ struct fusbh200_qtd, qtd_list);
+ /*
+ * first qtd may already be partially processed.
+ * If we come here during unlink, the QH overlay region
+ * might have reference to the just unlinked qtd. The
+ * qtd is updated in qh_completions(). Update the QH
+ * overlay here.
+ */
+ if (cpu_to_hc32(fusbh200, qtd->qtd_dma) == qh->hw->hw_current) {
+ qh->hw->hw_qtd_next = qtd->hw_next;
+ qtd = NULL;
+ }
+ }
+
+ if (qtd)
+ qh_update (fusbh200, qh, qtd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void qh_link_async(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh);
+
+static void fusbh200_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200(hcd);
+ struct fusbh200_qh *qh = ep->hcpriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fusbh200->lock, flags);
+ qh->clearing_tt = 0;
+ if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+ && fusbh200->rh_state == FUSBH200_RH_RUNNING)
+ qh_link_async(fusbh200, qh);
+ spin_unlock_irqrestore(&fusbh200->lock, flags);
+}
+
+static void fusbh200_clear_tt_buffer(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh,
+ struct urb *urb, u32 token)
+{
+
+ /* If an async split transaction gets an error or is unlinked,
+ * the TT buffer may be left in an indeterminate state. We
+ * have to clear the TT buffer.
+ *
+ * Note: this routine is never called for Isochronous transfers.
+ */
+ if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+ struct usb_device *tt = urb->dev->tt->hub;
+ dev_dbg(&tt->dev,
+ "clear tt buffer port %d, a%d ep%d t%08x\n",
+ urb->dev->ttport, urb->dev->devnum,
+ usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+ if (urb->dev->tt->hub !=
+ fusbh200_to_hcd(fusbh200)->self.root_hub) {
+ if (usb_hub_clear_tt_buffer(urb) == 0)
+ qh->clearing_tt = 1;
+ }
+ }
+}
+
+static int qtd_copy_status (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ size_t length,
+ u32 token
+)
+{
+ int status = -EINPROGRESS;
+
+ /* count IN/OUT bytes, not SETUP (even short packets) */
+ if (likely (QTD_PID (token) != 2))
+ urb->actual_length += length - QTD_LENGTH (token);
+
+ /* don't modify error codes */
+ if (unlikely(urb->unlinked))
+ return status;
+
+ /* force cleanup after short read; not always an error */
+ if (unlikely (IS_SHORT_READ (token)))
+ status = -EREMOTEIO;
+
+ /* serious "can't proceed" faults reported by the hardware */
+ if (token & QTD_STS_HALT) {
+ if (token & QTD_STS_BABBLE) {
+ /* FIXME "must" disable babbling device's port too */
+ status = -EOVERFLOW;
+ /* CERR nonzero + halt --> stall */
+ } else if (QTD_CERR(token)) {
+ status = -EPIPE;
+
+ /* In theory, more than one of the following bits can be set
+ * since they are sticky and the transaction is retried.
+ * Which to test first is rather arbitrary.
+ */
+ } else if (token & QTD_STS_MMF) {
+ /* fs/ls interrupt xfer missed the complete-split */
+ status = -EPROTO;
+ } else if (token & QTD_STS_DBE) {
+ status = (QTD_PID (token) == 1) /* IN ? */
+ ? -ENOSR /* hc couldn't read data */
+ : -ECOMM; /* hc couldn't write data */
+ } else if (token & QTD_STS_XACT) {
+ /* timeout, bad CRC, wrong PID, etc */
+ fusbh200_dbg(fusbh200, "devpath %s ep%d%s 3strikes\n",
+ urb->dev->devpath,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out");
+ status = -EPROTO;
+ } else { /* unknown */
+ status = -EPROTO;
+ }
+
+ fusbh200_vdbg (fusbh200,
+ "dev%d ep%d%s qtd token %08x --> status %d\n",
+ usb_pipedevice (urb->pipe),
+ usb_pipeendpoint (urb->pipe),
+ usb_pipein (urb->pipe) ? "in" : "out",
+ token, status);
+ }
+
+ return status;
+}
+
+static void
+fusbh200_urb_done(struct fusbh200_hcd *fusbh200, struct urb *urb, int status)
+__releases(fusbh200->lock)
+__acquires(fusbh200->lock)
+{
+ if (likely (urb->hcpriv != NULL)) {
+ struct fusbh200_qh *qh = (struct fusbh200_qh *) urb->hcpriv;
+
+ /* S-mask in a QH means it's an interrupt urb */
+ if ((qh->hw->hw_info2 & cpu_to_hc32(fusbh200, QH_SMASK)) != 0) {
+
+ /* ... update hc-wide periodic stats (for usbfs) */
+ fusbh200_to_hcd(fusbh200)->self.bandwidth_int_reqs--;
+ }
+ }
+
+ if (unlikely(urb->unlinked)) {
+ COUNT(fusbh200->stats.unlink);
+ } else {
+ /* report non-error and short read status as zero */
+ if (status == -EINPROGRESS || status == -EREMOTEIO)
+ status = 0;
+ COUNT(fusbh200->stats.complete);
+ }
+
+#ifdef FUSBH200_URB_TRACE
+ fusbh200_dbg (fusbh200,
+ "%s %s urb %p ep%d%s status %d len %d/%d\n",
+ __func__, urb->dev->devpath, urb,
+ usb_pipeendpoint (urb->pipe),
+ usb_pipein (urb->pipe) ? "in" : "out",
+ status,
+ urb->actual_length, urb->transfer_buffer_length);
+#endif
+
+ /* complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(fusbh200_to_hcd(fusbh200), urb);
+ spin_unlock (&fusbh200->lock);
+ usb_hcd_giveback_urb(fusbh200_to_hcd(fusbh200), urb, status);
+ spin_lock (&fusbh200->lock);
+}
+
+static int qh_schedule (struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh);
+
+/*
+ * Process and free completed qtds for a qh, returning URBs to drivers.
+ * Chases up to qh->hw_current. Returns number of completions called,
+ * indicating how much "real" work we did.
+ */
+static unsigned
+qh_completions (struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ struct fusbh200_qtd *last, *end = qh->dummy;
+ struct list_head *entry, *tmp;
+ int last_status;
+ int stopped;
+ unsigned count = 0;
+ u8 state;
+ struct fusbh200_qh_hw *hw = qh->hw;
+
+ if (unlikely (list_empty (&qh->qtd_list)))
+ return count;
+
+ /* completions (or tasks on other cpus) must never clobber HALT
+ * till we've gone through and cleaned everything up, even when
+ * they add urbs to this qh's queue or mark them for unlinking.
+ *
+ * NOTE: unlinking expects to be done in queue order.
+ *
+ * It's a bug for qh->qh_state to be anything other than
+ * QH_STATE_IDLE, unless our caller is scan_async() or
+ * scan_intr().
+ */
+ state = qh->qh_state;
+ qh->qh_state = QH_STATE_COMPLETING;
+ stopped = (state == QH_STATE_IDLE);
+
+ rescan:
+ last = NULL;
+ last_status = -EINPROGRESS;
+ qh->needs_rescan = 0;
+
+ /* remove de-activated QTDs from front of queue.
+ * after faults (including short reads), cleanup this urb
+ * then let the queue advance.
+ * if queue is stopped, handles unlinks.
+ */
+ list_for_each_safe (entry, tmp, &qh->qtd_list) {
+ struct fusbh200_qtd *qtd;
+ struct urb *urb;
+ u32 token = 0;
+
+ qtd = list_entry (entry, struct fusbh200_qtd, qtd_list);
+ urb = qtd->urb;
+
+ /* clean up any state from previous QTD ...*/
+ if (last) {
+ if (likely (last->urb != urb)) {
+ fusbh200_urb_done(fusbh200, last->urb, last_status);
+ count++;
+ last_status = -EINPROGRESS;
+ }
+ fusbh200_qtd_free (fusbh200, last);
+ last = NULL;
+ }
+
+ /* ignore urbs submitted during completions we reported */
+ if (qtd == end)
+ break;
+
+ /* hardware copies qtd out of qh overlay */
+ rmb ();
+ token = hc32_to_cpu(fusbh200, qtd->hw_token);
+
+ /* always clean up qtds the hc de-activated */
+ retry_xacterr:
+ if ((token & QTD_STS_ACTIVE) == 0) {
+
+ /* Report Data Buffer Error: non-fatal but useful */
+ if (token & QTD_STS_DBE)
+ fusbh200_dbg(fusbh200,
+ "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+ urb,
+ usb_endpoint_num(&urb->ep->desc),
+ usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out",
+ urb->transfer_buffer_length,
+ qtd,
+ qh);
+
+ /* on STALL, error, and short reads this urb must
+ * complete and all its qtds must be recycled.
+ */
+ if ((token & QTD_STS_HALT) != 0) {
+
+ /* retry transaction errors until we
+ * reach the software xacterr limit
+ */
+ if ((token & QTD_STS_XACT) &&
+ QTD_CERR(token) == 0 &&
+ ++qh->xacterrs < QH_XACTERR_MAX &&
+ !urb->unlinked) {
+ fusbh200_dbg(fusbh200,
+ "detected XactErr len %zu/%zu retry %d\n",
+ qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
+
+ /* reset the token in the qtd and the
+ * qh overlay (which still contains
+ * the qtd) so that we pick up from
+ * where we left off
+ */
+ token &= ~QTD_STS_HALT;
+ token |= QTD_STS_ACTIVE |
+ (FUSBH200_TUNE_CERR << 10);
+ qtd->hw_token = cpu_to_hc32(fusbh200,
+ token);
+ wmb();
+ hw->hw_token = cpu_to_hc32(fusbh200,
+ token);
+ goto retry_xacterr;
+ }
+ stopped = 1;
+
+ /* magic dummy for some short reads; qh won't advance.
+ * that silicon quirk can kick in with this dummy too.
+ *
+ * other short reads won't stop the queue, including
+ * control transfers (status stage handles that) or
+ * most other single-qtd reads ... the queue stops if
+ * URB_SHORT_NOT_OK was set so the driver submitting
+ * the urbs could clean it up.
+ */
+ } else if (IS_SHORT_READ (token)
+ && !(qtd->hw_alt_next
+ & FUSBH200_LIST_END(fusbh200))) {
+ stopped = 1;
+ }
+
+ /* stop scanning when we reach qtds the hc is using */
+ } else if (likely (!stopped
+ && fusbh200->rh_state >= FUSBH200_RH_RUNNING)) {
+ break;
+
+ /* scan the whole queue for unlinks whenever it stops */
+ } else {
+ stopped = 1;
+
+ /* cancel everything if we halt, suspend, etc */
+ if (fusbh200->rh_state < FUSBH200_RH_RUNNING)
+ last_status = -ESHUTDOWN;
+
+ /* this qtd is active; skip it unless a previous qtd
+ * for its urb faulted, or its urb was canceled.
+ */
+ else if (last_status == -EINPROGRESS && !urb->unlinked)
+ continue;
+
+ /* qh unlinked; token in overlay may be most current */
+ if (state == QH_STATE_IDLE
+ && cpu_to_hc32(fusbh200, qtd->qtd_dma)
+ == hw->hw_current) {
+ token = hc32_to_cpu(fusbh200, hw->hw_token);
+
+ /* An unlink may leave an incomplete
+ * async transaction in the TT buffer.
+ * We have to clear it.
+ */
+ fusbh200_clear_tt_buffer(fusbh200, qh, urb, token);
+ }
+ }
+
+ /* unless we already know the urb's status, collect qtd status
+ * and update count of bytes transferred. in common short read
+ * cases with only one data qtd (including control transfers),
+ * queue processing won't halt. but with two or more qtds (for
+ * example, with a 32 KB transfer), when the first qtd gets a
+ * short read the second must be removed by hand.
+ */
+ if (last_status == -EINPROGRESS) {
+ last_status = qtd_copy_status(fusbh200, urb,
+ qtd->length, token);
+ if (last_status == -EREMOTEIO
+ && (qtd->hw_alt_next
+ & FUSBH200_LIST_END(fusbh200)))
+ last_status = -EINPROGRESS;
+
+ /* As part of low/full-speed endpoint-halt processing
+ * we must clear the TT buffer (11.17.5).
+ */
+ if (unlikely(last_status != -EINPROGRESS &&
+ last_status != -EREMOTEIO)) {
+ /* The TT's in some hubs malfunction when they
+ * receive this request following a STALL (they
+ * stop sending isochronous packets). Since a
+ * STALL can't leave the TT buffer in a busy
+ * state (if you believe Figures 11-48 - 11-51
+ * in the USB 2.0 spec), we won't clear the TT
+ * buffer in this case. Strictly speaking this
+ * is a violation of the spec.
+ */
+ if (last_status != -EPIPE)
+ fusbh200_clear_tt_buffer(fusbh200, qh, urb,
+ token);
+ }
+ }
+
+ /* if we're removing something not at the queue head,
+ * patch the hardware queue pointer.
+ */
+ if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
+ last = list_entry (qtd->qtd_list.prev,
+ struct fusbh200_qtd, qtd_list);
+ last->hw_next = qtd->hw_next;
+ }
+
+ /* remove qtd; it's recycled after possible urb completion */
+ list_del (&qtd->qtd_list);
+ last = qtd;
+
+ /* reinit the xacterr counter for the next qtd */
+ qh->xacterrs = 0;
+ }
+
+ /* last urb's completion might still need calling */
+ if (likely (last != NULL)) {
+ fusbh200_urb_done(fusbh200, last->urb, last_status);
+ count++;
+ fusbh200_qtd_free (fusbh200, last);
+ }
+
+ /* Do we need to rescan for URBs dequeued during a giveback? */
+ if (unlikely(qh->needs_rescan)) {
+ /* If the QH is already unlinked, do the rescan now. */
+ if (state == QH_STATE_IDLE)
+ goto rescan;
+
+ /* Otherwise we have to wait until the QH is fully unlinked.
+ * Our caller will start an unlink if qh->needs_rescan is
+ * set. But if an unlink has already started, nothing needs
+ * to be done.
+ */
+ if (state != QH_STATE_LINKED)
+ qh->needs_rescan = 0;
+ }
+
+ /* restore original state; caller must unlink or relink */
+ qh->qh_state = state;
+
+ /* be sure the hardware's done with the qh before refreshing
+ * it after fault cleanup, or recovering from silicon wrongly
+ * overlaying the dummy qtd (which reduces DMA chatter).
+ */
+ if (stopped != 0 || hw->hw_qtd_next == FUSBH200_LIST_END(fusbh200)) {
+ switch (state) {
+ case QH_STATE_IDLE:
+ qh_refresh(fusbh200, qh);
+ break;
+ case QH_STATE_LINKED:
+ /* We won't refresh a QH that's linked (after the HC
+ * stopped the queue). That avoids a race:
+ * - HC reads first part of QH;
+ * - CPU updates that first part and the token;
+ * - HC reads rest of that QH, including token
+ * Result: HC gets an inconsistent image, and then
+ * DMAs to/from the wrong memory (corrupting it).
+ *
+ * That should be rare for interrupt transfers,
+ * except maybe high bandwidth ...
+ */
+
+ /* Tell the caller to start an unlink */
+ qh->needs_rescan = 1;
+ break;
+ /* otherwise, unlink already started */
+ }
+ }
+
+ return count;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// high bandwidth multiplier, as encoded in highspeed endpoint descriptors
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+// ... and packet size, for any kind of endpoint descriptor
+#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+
+/*
+ * reverse of qh_urb_transaction: free a list of TDs.
+ * used for cleanup after errors, before HC sees an URB's TDs.
+ */
+static void qtd_list_free (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ struct list_head *qtd_list
+) {
+ struct list_head *entry, *temp;
+
+ list_for_each_safe (entry, temp, qtd_list) {
+ struct fusbh200_qtd *qtd;
+
+ qtd = list_entry (entry, struct fusbh200_qtd, qtd_list);
+ list_del (&qtd->qtd_list);
+ fusbh200_qtd_free (fusbh200, qtd);
+ }
+}
+
+/*
+ * create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *
+qh_urb_transaction (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ struct list_head *head,
+ gfp_t flags
+) {
+ struct fusbh200_qtd *qtd, *qtd_prev;
+ dma_addr_t buf;
+ int len, this_sg_len, maxpacket;
+ int is_input;
+ u32 token;
+ int i;
+ struct scatterlist *sg;
+
+ /*
+ * URBs map to sequences of QTDs: one logical transaction
+ */
+ qtd = fusbh200_qtd_alloc (fusbh200, flags);
+ if (unlikely (!qtd))
+ return NULL;
+ list_add_tail (&qtd->qtd_list, head);
+ qtd->urb = urb;
+
+ token = QTD_STS_ACTIVE;
+ token |= (FUSBH200_TUNE_CERR << 10);
+ /* for split transactions, SplitXState initialized to zero */
+
+ len = urb->transfer_buffer_length;
+ is_input = usb_pipein (urb->pipe);
+ if (usb_pipecontrol (urb->pipe)) {
+ /* SETUP pid */
+ qtd_fill(fusbh200, qtd, urb->setup_dma,
+ sizeof (struct usb_ctrlrequest),
+ token | (2 /* "setup" */ << 8), 8);
+
+ /* ... and always at least one more pid */
+ token ^= QTD_TOGGLE;
+ qtd_prev = qtd;
+ qtd = fusbh200_qtd_alloc (fusbh200, flags);
+ if (unlikely (!qtd))
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = QTD_NEXT(fusbh200, qtd->qtd_dma);
+ list_add_tail (&qtd->qtd_list, head);
+
+ /* for zero length DATA stages, STATUS is always IN */
+ if (len == 0)
+ token |= (1 /* "in" */ << 8);
+ }
+
+ /*
+ * data transfer stage: buffer setup
+ */
+ i = urb->num_mapped_sgs;
+ if (len > 0 && i > 0) {
+ sg = urb->sg;
+ buf = sg_dma_address(sg);
+
+ /* urb->transfer_buffer_length may be smaller than the
+ * size of the scatterlist (or vice versa)
+ */
+ this_sg_len = min_t(int, sg_dma_len(sg), len);
+ } else {
+ sg = NULL;
+ buf = urb->transfer_dma;
+ this_sg_len = len;
+ }
+
+ if (is_input)
+ token |= (1 /* "in" */ << 8);
+ /* else it's already initted to "out" pid (0 << 8) */
+
+ maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
+
+ /*
+ * buffer gets wrapped in one or more qtds;
+ * last one may be "short" (including zero len)
+ * and may serve as a control status ack
+ */
+ for (;;) {
+ int this_qtd_len;
+
+ this_qtd_len = qtd_fill(fusbh200, qtd, buf, this_sg_len, token,
+ maxpacket);
+ this_sg_len -= this_qtd_len;
+ len -= this_qtd_len;
+ buf += this_qtd_len;
+
+ /*
+ * short reads advance to a "magic" dummy instead of the next
+ * qtd ... that forces the queue to stop, for manual cleanup.
+ * (this will usually be overridden later.)
+ */
+ if (is_input)
+ qtd->hw_alt_next = fusbh200->async->hw->hw_alt_next;
+
+ /* qh makes control packets use qtd toggle; maybe switch it */
+ if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+ token ^= QTD_TOGGLE;
+
+ if (likely(this_sg_len <= 0)) {
+ if (--i <= 0 || len <= 0)
+ break;
+ sg = sg_next(sg);
+ buf = sg_dma_address(sg);
+ this_sg_len = min_t(int, sg_dma_len(sg), len);
+ }
+
+ qtd_prev = qtd;
+ qtd = fusbh200_qtd_alloc (fusbh200, flags);
+ if (unlikely (!qtd))
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = QTD_NEXT(fusbh200, qtd->qtd_dma);
+ list_add_tail (&qtd->qtd_list, head);
+ }
+
+ /*
+ * unless the caller requires manual cleanup after short reads,
+ * have the alt_next mechanism keep the queue running after the
+ * last data qtd (the only one, for control and most other cases).
+ */
+ if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
+ || usb_pipecontrol (urb->pipe)))
+ qtd->hw_alt_next = FUSBH200_LIST_END(fusbh200);
+
+ /*
+ * control requests may need a terminating data "status" ack;
+ * other OUT ones may need a terminating short packet
+ * (zero length).
+ */
+ if (likely (urb->transfer_buffer_length != 0)) {
+ int one_more = 0;
+
+ if (usb_pipecontrol (urb->pipe)) {
+ one_more = 1;
+ token ^= 0x0100; /* "in" <--> "out" */
+ token |= QTD_TOGGLE; /* force DATA1 */
+ } else if (usb_pipeout(urb->pipe)
+ && (urb->transfer_flags & URB_ZERO_PACKET)
+ && !(urb->transfer_buffer_length % maxpacket)) {
+ one_more = 1;
+ }
+ if (one_more) {
+ qtd_prev = qtd;
+ qtd = fusbh200_qtd_alloc (fusbh200, flags);
+ if (unlikely (!qtd))
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = QTD_NEXT(fusbh200, qtd->qtd_dma);
+ list_add_tail (&qtd->qtd_list, head);
+
+ /* never any data in such packets */
+ qtd_fill(fusbh200, qtd, 0, 0, token, 0);
+ }
+ }
+
+ /* by default, enable interrupt on urb completion */
+ if (likely (!(urb->transfer_flags & URB_NO_INTERRUPT)))
+ qtd->hw_token |= cpu_to_hc32(fusbh200, QTD_IOC);
+ return head;
+
+cleanup:
+ qtd_list_free (fusbh200, urb, head);
+ return NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// Would be best to create all qh's from config descriptors,
+// when each interface/altsetting is established. Unlink
+// any previous qh and cancel its urbs first; endpoints are
+// implicitly reset then (data toggle too).
+// That'd mean updating how usbcore talks to HCDs. (2.7?)
+
+
+/*
+ * Each QH holds a qtd list; a QH is used for everything except iso.
+ *
+ * For interrupt urbs, the scheduler must set the microframe scheduling
+ * mask(s) each time the QH gets scheduled. For highspeed, that's
+ * just one microframe in the s-mask. For split interrupt transactions
+ * there are additional complications: c-mask, maybe FSTNs.
+ */
+static struct fusbh200_qh *
+qh_make (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ gfp_t flags
+) {
+ struct fusbh200_qh *qh = fusbh200_qh_alloc (fusbh200, flags);
+ u32 info1 = 0, info2 = 0;
+ int is_input, type;
+ int maxp = 0;
+ struct usb_tt *tt = urb->dev->tt;
+ struct fusbh200_qh_hw *hw;
+
+ if (!qh)
+ return qh;
+
+ /*
+ * init endpoint/device data for this QH
+ */
+ info1 |= usb_pipeendpoint (urb->pipe) << 8;
+ info1 |= usb_pipedevice (urb->pipe) << 0;
+
+ is_input = usb_pipein (urb->pipe);
+ type = usb_pipetype (urb->pipe);
+ maxp = usb_maxpacket (urb->dev, urb->pipe, !is_input);
+
+ /* 1024 byte maxpacket is a hardware ceiling. High bandwidth
+ * acts like up to 3KB, but is built from smaller packets.
+ */
+ if (max_packet(maxp) > 1024) {
+ fusbh200_dbg(fusbh200, "bogus qh maxpacket %d\n", max_packet(maxp));
+ goto done;
+ }
+
+ /* Compute interrupt scheduling parameters just once, and save.
+ * - allowing for high bandwidth, how many nsec/uframe are used?
+ * - split transactions need a second CSPLIT uframe; same question
+ * - splits also need a schedule gap (for full/low speed I/O)
+ * - qh has a polling interval
+ *
+ * For control/bulk requests, the HC or TT handles these.
+ */
+ if (type == PIPE_INTERRUPT) {
+ qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
+ is_input, 0,
+ hb_mult(maxp) * max_packet(maxp)));
+ qh->start = NO_FRAME;
+
+ if (urb->dev->speed == USB_SPEED_HIGH) {
+ qh->c_usecs = 0;
+ qh->gap_uf = 0;
+
+ qh->period = urb->interval >> 3;
+ if (qh->period == 0 && urb->interval != 1) {
+ /* NOTE interval 2 or 4 uframes could work.
+ * But interval 1 scheduling is simpler, and
+ * includes high bandwidth.
+ */
+ urb->interval = 1;
+ } else if (qh->period > fusbh200->periodic_size) {
+ qh->period = fusbh200->periodic_size;
+ urb->interval = qh->period << 3;
+ }
+ } else {
+ int think_time;
+
+ /* gap is f(FS/LS transfer times) */
+ qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
+ is_input, 0, maxp) / (125 * 1000);
+
+ /* FIXME this just approximates SPLIT/CSPLIT times */
+ if (is_input) { // SPLIT, gap, CSPLIT+DATA
+ qh->c_usecs = qh->usecs + HS_USECS (0);
+ qh->usecs = HS_USECS (1);
+ } else { // SPLIT+DATA, gap, CSPLIT
+ qh->usecs += HS_USECS (1);
+ qh->c_usecs = HS_USECS (0);
+ }
+
+ think_time = tt ? tt->think_time : 0;
+ qh->tt_usecs = NS_TO_US (think_time +
+ usb_calc_bus_time (urb->dev->speed,
+ is_input, 0, max_packet (maxp)));
+ qh->period = urb->interval;
+ if (qh->period > fusbh200->periodic_size) {
+ qh->period = fusbh200->periodic_size;
+ urb->interval = qh->period;
+ }
+ }
+ }
+
+ /* support for tt scheduling, and access to toggles */
+ qh->dev = urb->dev;
+
+ /* using TT? */
+ switch (urb->dev->speed) {
+ case USB_SPEED_LOW:
+ info1 |= QH_LOW_SPEED;
+ /* FALL THROUGH */
+
+ case USB_SPEED_FULL:
+ /* EPS 0 means "full" */
+ if (type != PIPE_INTERRUPT)
+ info1 |= (FUSBH200_TUNE_RL_TT << 28);
+ if (type == PIPE_CONTROL) {
+ info1 |= QH_CONTROL_EP; /* for TT */
+ info1 |= QH_TOGGLE_CTL; /* toggle from qtd */
+ }
+ info1 |= maxp << 16;
+
+ info2 |= (FUSBH200_TUNE_MULT_TT << 30);
+
+ /* Some Freescale processors have an erratum in which the
+ * port number in the queue head was 0..N-1 instead of 1..N.
+ */
+ if (fusbh200_has_fsl_portno_bug(fusbh200))
+ info2 |= (urb->dev->ttport-1) << 23;
+ else
+ info2 |= urb->dev->ttport << 23;
+
+ /* set the address of the TT; for TDI's integrated
+ * root hub tt, leave it zeroed.
+ */
+ if (tt && tt->hub != fusbh200_to_hcd(fusbh200)->self.root_hub)
+ info2 |= tt->hub->devnum << 16;
+
+ /* NOTE: if (PIPE_INTERRUPT) { scheduler sets c-mask } */
+
+ break;
+
+ case USB_SPEED_HIGH: /* no TT involved */
+ info1 |= QH_HIGH_SPEED;
+ if (type == PIPE_CONTROL) {
+ info1 |= (FUSBH200_TUNE_RL_HS << 28);
+ info1 |= 64 << 16; /* usb2 fixed maxpacket */
+ info1 |= QH_TOGGLE_CTL; /* toggle from qtd */
+ info2 |= (FUSBH200_TUNE_MULT_HS << 30);
+ } else if (type == PIPE_BULK) {
+ info1 |= (FUSBH200_TUNE_RL_HS << 28);
+ /* The USB spec says that high speed bulk endpoints
+ * always use 512 byte maxpacket. But some device
+ * vendors decided to ignore that, and MSFT is happy
+ * to help them do so. So now people expect to use
+ * such nonconformant devices with Linux too; sigh.
+ */
+ info1 |= max_packet(maxp) << 16;
+ info2 |= (FUSBH200_TUNE_MULT_HS << 30);
+ } else { /* PIPE_INTERRUPT */
+ info1 |= max_packet (maxp) << 16;
+ info2 |= hb_mult (maxp) << 30;
+ }
+ break;
+ default:
+ fusbh200_dbg(fusbh200, "bogus dev %p speed %d\n", urb->dev,
+ urb->dev->speed);
+done:
+ qh_destroy(fusbh200, qh);
+ return NULL;
+ }
+
+ /* NOTE: if (PIPE_INTERRUPT) { scheduler sets s-mask } */
+
+ /* init as live, toggle clear, advance to dummy */
+ qh->qh_state = QH_STATE_IDLE;
+ hw = qh->hw;
+ hw->hw_info1 = cpu_to_hc32(fusbh200, info1);
+ hw->hw_info2 = cpu_to_hc32(fusbh200, info2);
+ qh->is_out = !is_input;
+ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
+ qh_refresh (fusbh200, qh);
+ return qh;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void enable_async(struct fusbh200_hcd *fusbh200)
+{
+ if (fusbh200->async_count++)
+ return;
+
+ /* Stop waiting to turn off the async schedule */
+ fusbh200->enabled_hrtimer_events &= ~BIT(FUSBH200_HRTIMER_DISABLE_ASYNC);
+
+ /* Don't start the schedule until ASS is 0 */
+ fusbh200_poll_ASS(fusbh200);
+ turn_on_io_watchdog(fusbh200);
+}
+
+static void disable_async(struct fusbh200_hcd *fusbh200)
+{
+ if (--fusbh200->async_count)
+ return;
+
+ /* The async schedule and async_unlink list are supposed to be empty */
+ WARN_ON(fusbh200->async->qh_next.qh || fusbh200->async_unlink);
+
+ /* Don't turn off the schedule until ASS is 1 */
+ fusbh200_poll_ASS(fusbh200);
+}
+
+/* move qh (and its qtds) onto async queue; maybe enable queue. */
+
+static void qh_link_async (struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ __hc32 dma = QH_NEXT(fusbh200, qh->qh_dma);
+ struct fusbh200_qh *head;
+
+ /* Don't link a QH if there's a Clear-TT-Buffer pending */
+ if (unlikely(qh->clearing_tt))
+ return;
+
+ WARN_ON(qh->qh_state != QH_STATE_IDLE);
+
+ /* clear halt and/or toggle; and maybe recover from silicon quirk */
+ qh_refresh(fusbh200, qh);
+
+ /* splice right after start */
+ head = fusbh200->async;
+ qh->qh_next = head->qh_next;
+ qh->hw->hw_next = head->hw->hw_next;
+ wmb ();
+
+ head->qh_next.qh = qh;
+ head->hw->hw_next = dma;
+
+ qh->xacterrs = 0;
+ qh->qh_state = QH_STATE_LINKED;
+ /* qtd completions reported later by interrupt */
+
+ enable_async(fusbh200);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct fusbh200_qh *qh_append_tds (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ struct list_head *qtd_list,
+ int epnum,
+ void **ptr
+)
+{
+ struct fusbh200_qh *qh = NULL;
+ __hc32 qh_addr_mask = cpu_to_hc32(fusbh200, 0x7f);
+
+ qh = (struct fusbh200_qh *) *ptr;
+ if (unlikely (qh == NULL)) {
+ /* can't sleep here, we have fusbh200->lock... */
+ qh = qh_make (fusbh200, urb, GFP_ATOMIC);
+ *ptr = qh;
+ }
+ if (likely (qh != NULL)) {
+ struct fusbh200_qtd *qtd;
+
+ if (unlikely (list_empty (qtd_list)))
+ qtd = NULL;
+ else
+ qtd = list_entry (qtd_list->next, struct fusbh200_qtd,
+ qtd_list);
+
+ /* control qh may need patching ... */
+ if (unlikely (epnum == 0)) {
+
+ /* usb_reset_device() briefly reverts to address 0 */
+ if (usb_pipedevice (urb->pipe) == 0)
+ qh->hw->hw_info1 &= ~qh_addr_mask;
+ }
+
+ /* just one way to queue requests: swap with the dummy qtd.
+ * only hc or qh_refresh() ever modify the overlay.
+ */
+ if (likely (qtd != NULL)) {
+ struct fusbh200_qtd *dummy;
+ dma_addr_t dma;
+ __hc32 token;
+
+ /* to avoid racing the HC, use the dummy td instead of
+ * the first td of our list (becomes new dummy). both
+ * tds stay deactivated until we're done, when the
+ * HC is allowed to fetch the old dummy (4.10.2).
+ */
+ token = qtd->hw_token;
+ qtd->hw_token = HALT_BIT(fusbh200);
+
+ dummy = qh->dummy;
+
+ dma = dummy->qtd_dma;
+ *dummy = *qtd;
+ dummy->qtd_dma = dma;
+
+ list_del (&qtd->qtd_list);
+ list_add (&dummy->qtd_list, qtd_list);
+ list_splice_tail(qtd_list, &qh->qtd_list);
+
+ fusbh200_qtd_init(fusbh200, qtd, qtd->qtd_dma);
+ qh->dummy = qtd;
+
+ /* hc must see the new dummy at list end */
+ dma = qtd->qtd_dma;
+ qtd = list_entry (qh->qtd_list.prev,
+ struct fusbh200_qtd, qtd_list);
+ qtd->hw_next = QTD_NEXT(fusbh200, dma);
+
+ /* let the hc process these next qtds */
+ wmb ();
+ dummy->hw_token = token;
+
+ urb->hcpriv = qh;
+ }
+ }
+ return qh;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+submit_async (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ struct list_head *qtd_list,
+ gfp_t mem_flags
+) {
+ int epnum;
+ unsigned long flags;
+ struct fusbh200_qh *qh = NULL;
+ int rc;
+
+ epnum = urb->ep->desc.bEndpointAddress;
+
+#ifdef FUSBH200_URB_TRACE
+ {
+ struct fusbh200_qtd *qtd;
+ qtd = list_entry(qtd_list->next, struct fusbh200_qtd, qtd_list);
+ fusbh200_dbg(fusbh200,
+ "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+ __func__, urb->dev->devpath, urb,
+ epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
+ urb->transfer_buffer_length,
+ qtd, urb->ep->hcpriv);
+ }
+#endif
+
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ if (unlikely(!HCD_HW_ACCESSIBLE(fusbh200_to_hcd(fusbh200)))) {
+ rc = -ESHUTDOWN;
+ goto done;
+ }
+ rc = usb_hcd_link_urb_to_ep(fusbh200_to_hcd(fusbh200), urb);
+ if (unlikely(rc))
+ goto done;
+
+ qh = qh_append_tds(fusbh200, urb, qtd_list, epnum, &urb->ep->hcpriv);
+ if (unlikely(qh == NULL)) {
+ usb_hcd_unlink_urb_from_ep(fusbh200_to_hcd(fusbh200), urb);
+ rc = -ENOMEM;
+ goto done;
+ }
+
+ /* Control/bulk operations through TTs don't need scheduling,
+ * the HC and TT handle it when the TT has a buffer ready.
+ */
+ if (likely (qh->qh_state == QH_STATE_IDLE))
+ qh_link_async(fusbh200, qh);
+ done:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ if (unlikely (qh == NULL))
+ qtd_list_free (fusbh200, urb, qtd_list);
+ return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void single_unlink_async(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ struct fusbh200_qh *prev;
+
+ /* Add to the end of the list of QHs waiting for the next IAAD */
+ qh->qh_state = QH_STATE_UNLINK;
+ if (fusbh200->async_unlink)
+ fusbh200->async_unlink_last->unlink_next = qh;
+ else
+ fusbh200->async_unlink = qh;
+ fusbh200->async_unlink_last = qh;
+
+ /* Unlink it from the schedule */
+ prev = fusbh200->async;
+ while (prev->qh_next.qh != qh)
+ prev = prev->qh_next.qh;
+
+ prev->hw->hw_next = qh->hw->hw_next;
+ prev->qh_next = qh->qh_next;
+ if (fusbh200->qh_scan_next == qh)
+ fusbh200->qh_scan_next = qh->qh_next.qh;
+}
+
+static void start_iaa_cycle(struct fusbh200_hcd *fusbh200, bool nested)
+{
+ /*
+ * Do nothing if an IAA cycle is already running or
+ * if one will be started shortly.
+ */
+ if (fusbh200->async_iaa || fusbh200->async_unlinking)
+ return;
+
+ /* Do all the waiting QHs at once */
+ fusbh200->async_iaa = fusbh200->async_unlink;
+ fusbh200->async_unlink = NULL;
+
+ /* If the controller isn't running, we don't have to wait for it */
+ if (unlikely(fusbh200->rh_state < FUSBH200_RH_RUNNING)) {
+ if (!nested) /* Avoid recursion */
+ end_unlink_async(fusbh200);
+
+ /* Otherwise start a new IAA cycle */
+ } else if (likely(fusbh200->rh_state == FUSBH200_RH_RUNNING)) {
+ /* Make sure the unlinks are all visible to the hardware */
+ wmb();
+
+ fusbh200_writel(fusbh200, fusbh200->command | CMD_IAAD,
+ &fusbh200->regs->command);
+ fusbh200_readl(fusbh200, &fusbh200->regs->command);
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_IAA_WATCHDOG, true);
+ }
+}
+
+/* the async qh for the qtds being unlinked are now gone from the HC */
+
+static void end_unlink_async(struct fusbh200_hcd *fusbh200)
+{
+ struct fusbh200_qh *qh;
+
+ /* Process the idle QHs */
+ restart:
+ fusbh200->async_unlinking = true;
+ while (fusbh200->async_iaa) {
+ qh = fusbh200->async_iaa;
+ fusbh200->async_iaa = qh->unlink_next;
+ qh->unlink_next = NULL;
+
+ qh->qh_state = QH_STATE_IDLE;
+ qh->qh_next.qh = NULL;
+
+ qh_completions(fusbh200, qh);
+ if (!list_empty(&qh->qtd_list) &&
+ fusbh200->rh_state == FUSBH200_RH_RUNNING)
+ qh_link_async(fusbh200, qh);
+ disable_async(fusbh200);
+ }
+ fusbh200->async_unlinking = false;
+
+ /* Start a new IAA cycle if any QHs are waiting for it */
+ if (fusbh200->async_unlink) {
+ start_iaa_cycle(fusbh200, true);
+ if (unlikely(fusbh200->rh_state < FUSBH200_RH_RUNNING))
+ goto restart;
+ }
+}
+
+static void unlink_empty_async(struct fusbh200_hcd *fusbh200)
+{
+ struct fusbh200_qh *qh, *next;
+ bool stopped = (fusbh200->rh_state < FUSBH200_RH_RUNNING);
+ bool check_unlinks_later = false;
+
+ /* Unlink all the async QHs that have been empty for a timer cycle */
+ next = fusbh200->async->qh_next.qh;
+ while (next) {
+ qh = next;
+ next = qh->qh_next.qh;
+
+ if (list_empty(&qh->qtd_list) &&
+ qh->qh_state == QH_STATE_LINKED) {
+ if (!stopped && qh->unlink_cycle ==
+ fusbh200->async_unlink_cycle)
+ check_unlinks_later = true;
+ else
+ single_unlink_async(fusbh200, qh);
+ }
+ }
+
+ /* Start a new IAA cycle if any QHs are waiting for it */
+ if (fusbh200->async_unlink)
+ start_iaa_cycle(fusbh200, false);
+
+ /* QHs that haven't been empty for long enough will be handled later */
+ if (check_unlinks_later) {
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_ASYNC_UNLINKS, true);
+ ++fusbh200->async_unlink_cycle;
+ }
+}
+
+/* makes sure the async qh will become idle */
+/* caller must own fusbh200->lock */
+
+static void start_unlink_async(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ /*
+ * If the QH isn't linked then there's nothing we can do
+ * unless we were called during a giveback, in which case
+ * qh_completions() has to deal with it.
+ */
+ if (qh->qh_state != QH_STATE_LINKED) {
+ if (qh->qh_state == QH_STATE_COMPLETING)
+ qh->needs_rescan = 1;
+ return;
+ }
+
+ single_unlink_async(fusbh200, qh);
+ start_iaa_cycle(fusbh200, false);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void scan_async (struct fusbh200_hcd *fusbh200)
+{
+ struct fusbh200_qh *qh;
+ bool check_unlinks_later = false;
+
+ fusbh200->qh_scan_next = fusbh200->async->qh_next.qh;
+ while (fusbh200->qh_scan_next) {
+ qh = fusbh200->qh_scan_next;
+ fusbh200->qh_scan_next = qh->qh_next.qh;
+ rescan:
+ /* clean any finished work for this qh */
+ if (!list_empty(&qh->qtd_list)) {
+ int temp;
+
+ /*
+ * Unlinks could happen here; completion reporting
+ * drops the lock. That's why fusbh200->qh_scan_next
+ * always holds the next qh to scan; if the next qh
+ * gets unlinked then fusbh200->qh_scan_next is adjusted
+ * in single_unlink_async().
+ */
+ temp = qh_completions(fusbh200, qh);
+ if (qh->needs_rescan) {
+ start_unlink_async(fusbh200, qh);
+ } else if (list_empty(&qh->qtd_list)
+ && qh->qh_state == QH_STATE_LINKED) {
+ qh->unlink_cycle = fusbh200->async_unlink_cycle;
+ check_unlinks_later = true;
+ } else if (temp != 0)
+ goto rescan;
+ }
+ }
+
+ /*
+ * Unlink empty entries, reducing DMA usage as well
+ * as HCD schedule-scanning costs. Delay for any qh
+ * we just scanned, there's a not-unusual case that it
+ * doesn't stay idle for long.
+ */
+ if (check_unlinks_later && fusbh200->rh_state == FUSBH200_RH_RUNNING &&
+ !(fusbh200->enabled_hrtimer_events &
+ BIT(FUSBH200_HRTIMER_ASYNC_UNLINKS))) {
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_ASYNC_UNLINKS, true);
+ ++fusbh200->async_unlink_cycle;
+ }
+}
+/*-------------------------------------------------------------------------*/
+/*
+ * EHCI scheduled transaction support: interrupt, iso, split iso
+ * These are called "periodic" transactions in the EHCI spec.
+ *
+ * Note that for interrupt transfers, the QH/QTD manipulation is shared
+ * with the "asynchronous" transaction support (control/bulk transfers).
+ * The only real difference is in how interrupt transfers are scheduled.
+ *
+ * For ISO, we make an "iso_stream" head to serve the same role as a QH.
+ * It keeps track of every ITD (or SITD) that's linked, and holds enough
+ * pre-calculated schedule data to make appending to the queue be quick.
+ */
+
+static int fusbh200_get_frame (struct usb_hcd *hcd);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * periodic_next_shadow - return "next" pointer on shadow list
+ * @periodic: host pointer to qh/itd
+ * @tag: hardware tag for type of this record
+ */
+static union fusbh200_shadow *
+periodic_next_shadow(struct fusbh200_hcd *fusbh200, union fusbh200_shadow *periodic,
+ __hc32 tag)
+{
+ switch (hc32_to_cpu(fusbh200, tag)) {
+ case Q_TYPE_QH:
+ return &periodic->qh->qh_next;
+ case Q_TYPE_FSTN:
+ return &periodic->fstn->fstn_next;
+ default:
+ return &periodic->itd->itd_next;
+ }
+}
+
+static __hc32 *
+shadow_next_periodic(struct fusbh200_hcd *fusbh200, union fusbh200_shadow *periodic,
+ __hc32 tag)
+{
+ switch (hc32_to_cpu(fusbh200, tag)) {
+ /* our fusbh200_shadow.qh is actually software part */
+ case Q_TYPE_QH:
+ return &periodic->qh->hw->hw_next;
+ /* others are hw parts */
+ default:
+ return periodic->hw_next;
+ }
+}
+
+/* caller must hold fusbh200->lock */
+static void periodic_unlink (struct fusbh200_hcd *fusbh200, unsigned frame, void *ptr)
+{
+ union fusbh200_shadow *prev_p = &fusbh200->pshadow[frame];
+ __hc32 *hw_p = &fusbh200->periodic[frame];
+ union fusbh200_shadow here = *prev_p;
+
+ /* find predecessor of "ptr"; hw and shadow lists are in sync */
+ while (here.ptr && here.ptr != ptr) {
+ prev_p = periodic_next_shadow(fusbh200, prev_p,
+ Q_NEXT_TYPE(fusbh200, *hw_p));
+ hw_p = shadow_next_periodic(fusbh200, &here,
+ Q_NEXT_TYPE(fusbh200, *hw_p));
+ here = *prev_p;
+ }
+ /* an interrupt entry (at list end) could have been shared */
+ if (!here.ptr)
+ return;
+
+ /* update shadow and hardware lists ... the old "next" pointers
+ * from ptr may still be in use, the caller updates them.
+ */
+ *prev_p = *periodic_next_shadow(fusbh200, &here,
+ Q_NEXT_TYPE(fusbh200, *hw_p));
+
+ *hw_p = *shadow_next_periodic(fusbh200, &here,
+ Q_NEXT_TYPE(fusbh200, *hw_p));
+}
+
+/* how many of the uframe's 125 usecs are allocated? */
+static unsigned short
+periodic_usecs (struct fusbh200_hcd *fusbh200, unsigned frame, unsigned uframe)
+{
+ __hc32 *hw_p = &fusbh200->periodic [frame];
+ union fusbh200_shadow *q = &fusbh200->pshadow [frame];
+ unsigned usecs = 0;
+ struct fusbh200_qh_hw *hw;
+
+ while (q->ptr) {
+ switch (hc32_to_cpu(fusbh200, Q_NEXT_TYPE(fusbh200, *hw_p))) {
+ case Q_TYPE_QH:
+ hw = q->qh->hw;
+ /* is it in the S-mask? */
+ if (hw->hw_info2 & cpu_to_hc32(fusbh200, 1 << uframe))
+ usecs += q->qh->usecs;
+ /* ... or C-mask? */
+ if (hw->hw_info2 & cpu_to_hc32(fusbh200,
+ 1 << (8 + uframe)))
+ usecs += q->qh->c_usecs;
+ hw_p = &hw->hw_next;
+ q = &q->qh->qh_next;
+ break;
+ // case Q_TYPE_FSTN:
+ default:
+ /* for "save place" FSTNs, count the relevant INTR
+ * bandwidth from the previous frame
+ */
+ if (q->fstn->hw_prev != FUSBH200_LIST_END(fusbh200)) {
+ fusbh200_dbg (fusbh200, "ignoring FSTN cost ...\n");
+ }
+ hw_p = &q->fstn->hw_next;
+ q = &q->fstn->fstn_next;
+ break;
+ case Q_TYPE_ITD:
+ if (q->itd->hw_transaction[uframe])
+ usecs += q->itd->stream->usecs;
+ hw_p = &q->itd->hw_next;
+ q = &q->itd->itd_next;
+ break;
+ }
+ }
+#ifdef DEBUG
+ if (usecs > fusbh200->uframe_periodic_max)
+ fusbh200_err (fusbh200, "uframe %d sched overrun: %d usecs\n",
+ frame * 8 + uframe, usecs);
+#endif
+ return usecs;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int same_tt (struct usb_device *dev1, struct usb_device *dev2)
+{
+ if (!dev1->tt || !dev2->tt)
+ return 0;
+ if (dev1->tt != dev2->tt)
+ return 0;
+ if (dev1->tt->multi)
+ return dev1->ttport == dev2->ttport;
+ else
+ return 1;
+}
+
+/* return true iff the device's transaction translator is available
+ * for a periodic transfer starting at the specified frame, using
+ * all the uframes in the mask.
+ */
+static int tt_no_collision (
+ struct fusbh200_hcd *fusbh200,
+ unsigned period,
+ struct usb_device *dev,
+ unsigned frame,
+ u32 uf_mask
+)
+{
+ if (period == 0) /* error */
+ return 0;
+
+ /* note bandwidth wastage: split never follows csplit
+ * (different dev or endpoint) until the next uframe.
+ * calling convention doesn't make that distinction.
+ */
+ for (; frame < fusbh200->periodic_size; frame += period) {
+ union fusbh200_shadow here;
+ __hc32 type;
+ struct fusbh200_qh_hw *hw;
+
+ here = fusbh200->pshadow [frame];
+ type = Q_NEXT_TYPE(fusbh200, fusbh200->periodic [frame]);
+ while (here.ptr) {
+ switch (hc32_to_cpu(fusbh200, type)) {
+ case Q_TYPE_ITD:
+ type = Q_NEXT_TYPE(fusbh200, here.itd->hw_next);
+ here = here.itd->itd_next;
+ continue;
+ case Q_TYPE_QH:
+ hw = here.qh->hw;
+ if (same_tt (dev, here.qh->dev)) {
+ u32 mask;
+
+ mask = hc32_to_cpu(fusbh200,
+ hw->hw_info2);
+ /* "knows" no gap is needed */
+ mask |= mask >> 8;
+ if (mask & uf_mask)
+ break;
+ }
+ type = Q_NEXT_TYPE(fusbh200, hw->hw_next);
+ here = here.qh->qh_next;
+ continue;
+ // case Q_TYPE_FSTN:
+ default:
+ fusbh200_dbg (fusbh200,
+ "periodic frame %d bogus type %d\n",
+ frame, type);
+ }
+
+ /* collision or error */
+ return 0;
+ }
+ }
+
+ /* no collision */
+ return 1;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void enable_periodic(struct fusbh200_hcd *fusbh200)
+{
+ if (fusbh200->periodic_count++)
+ return;
+
+ /* Stop waiting to turn off the periodic schedule */
+ fusbh200->enabled_hrtimer_events &= ~BIT(FUSBH200_HRTIMER_DISABLE_PERIODIC);
+
+ /* Don't start the schedule until PSS is 0 */
+ fusbh200_poll_PSS(fusbh200);
+ turn_on_io_watchdog(fusbh200);
+}
+
+static void disable_periodic(struct fusbh200_hcd *fusbh200)
+{
+ if (--fusbh200->periodic_count)
+ return;
+
+ /* Don't turn off the schedule until PSS is 1 */
+ fusbh200_poll_PSS(fusbh200);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* periodic schedule slots have iso tds (normal or split) first, then a
+ * sparse tree for active interrupt transfers.
+ *
+ * this just links in a qh; caller guarantees uframe masks are set right.
+ * no FSTN support (yet; fusbh200 0.96+)
+ */
+static void qh_link_periodic(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ unsigned i;
+ unsigned period = qh->period;
+
+ dev_dbg (&qh->dev->dev,
+ "link qh%d-%04x/%p start %d [%d/%d us]\n",
+ period, hc32_to_cpup(fusbh200, &qh->hw->hw_info2)
+ & (QH_CMASK | QH_SMASK),
+ qh, qh->start, qh->usecs, qh->c_usecs);
+
+ /* high bandwidth, or otherwise every microframe */
+ if (period == 0)
+ period = 1;
+
+ for (i = qh->start; i < fusbh200->periodic_size; i += period) {
+ union fusbh200_shadow *prev = &fusbh200->pshadow[i];
+ __hc32 *hw_p = &fusbh200->periodic[i];
+ union fusbh200_shadow here = *prev;
+ __hc32 type = 0;
+
+ /* skip the iso nodes at list head */
+ while (here.ptr) {
+ type = Q_NEXT_TYPE(fusbh200, *hw_p);
+ if (type == cpu_to_hc32(fusbh200, Q_TYPE_QH))
+ break;
+ prev = periodic_next_shadow(fusbh200, prev, type);
+ hw_p = shadow_next_periodic(fusbh200, &here, type);
+ here = *prev;
+ }
+
+ /* sorting each branch by period (slow-->fast)
+ * enables sharing interior tree nodes
+ */
+ while (here.ptr && qh != here.qh) {
+ if (qh->period > here.qh->period)
+ break;
+ prev = &here.qh->qh_next;
+ hw_p = &here.qh->hw->hw_next;
+ here = *prev;
+ }
+ /* link in this qh, unless some earlier pass did that */
+ if (qh != here.qh) {
+ qh->qh_next = here;
+ if (here.qh)
+ qh->hw->hw_next = *hw_p;
+ wmb ();
+ prev->qh = qh;
+ *hw_p = QH_NEXT (fusbh200, qh->qh_dma);
+ }
+ }
+ qh->qh_state = QH_STATE_LINKED;
+ qh->xacterrs = 0;
+
+ /* update per-qh bandwidth for usbfs */
+ fusbh200_to_hcd(fusbh200)->self.bandwidth_allocated += qh->period
+ ? ((qh->usecs + qh->c_usecs) / qh->period)
+ : (qh->usecs * 8);
+
+ list_add(&qh->intr_node, &fusbh200->intr_qh_list);
+
+ /* maybe enable periodic schedule processing */
+ ++fusbh200->intr_count;
+ enable_periodic(fusbh200);
+}
+
+static void qh_unlink_periodic(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ unsigned i;
+ unsigned period;
+
+ /*
+ * If qh is for a low/full-speed device, simply unlinking it
+ * could interfere with an ongoing split transaction. To unlink
+ * it safely would require setting the QH_INACTIVATE bit and
+ * waiting at least one frame, as described in EHCI 4.12.2.5.
+ *
+ * We won't bother with any of this. Instead, we assume that the
+ * only reason for unlinking an interrupt QH while the current URB
+ * is still active is to dequeue all the URBs (flush the whole
+ * endpoint queue).
+ *
+ * If rebalancing the periodic schedule is ever implemented, this
+ * approach will no longer be valid.
+ */
+
+ /* high bandwidth, or otherwise part of every microframe */
+ if ((period = qh->period) == 0)
+ period = 1;
+
+ for (i = qh->start; i < fusbh200->periodic_size; i += period)
+ periodic_unlink (fusbh200, i, qh);
+
+ /* update per-qh bandwidth for usbfs */
+ fusbh200_to_hcd(fusbh200)->self.bandwidth_allocated -= qh->period
+ ? ((qh->usecs + qh->c_usecs) / qh->period)
+ : (qh->usecs * 8);
+
+ dev_dbg (&qh->dev->dev,
+ "unlink qh%d-%04x/%p start %d [%d/%d us]\n",
+ qh->period,
+ hc32_to_cpup(fusbh200, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK),
+ qh, qh->start, qh->usecs, qh->c_usecs);
+
+ /* qh->qh_next still "live" to HC */
+ qh->qh_state = QH_STATE_UNLINK;
+ qh->qh_next.ptr = NULL;
+
+ if (fusbh200->qh_scan_next == qh)
+ fusbh200->qh_scan_next = list_entry(qh->intr_node.next,
+ struct fusbh200_qh, intr_node);
+ list_del(&qh->intr_node);
+}
+
+static void start_unlink_intr(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ /* If the QH isn't linked then there's nothing we can do
+ * unless we were called during a giveback, in which case
+ * qh_completions() has to deal with it.
+ */
+ if (qh->qh_state != QH_STATE_LINKED) {
+ if (qh->qh_state == QH_STATE_COMPLETING)
+ qh->needs_rescan = 1;
+ return;
+ }
+
+ qh_unlink_periodic (fusbh200, qh);
+
+ /* Make sure the unlinks are visible before starting the timer */
+ wmb();
+
+ /*
+ * The EHCI spec doesn't say how long it takes the controller to
+ * stop accessing an unlinked interrupt QH. The timer delay is
+ * 9 uframes; presumably that will be long enough.
+ */
+ qh->unlink_cycle = fusbh200->intr_unlink_cycle;
+
+ /* New entries go at the end of the intr_unlink list */
+ if (fusbh200->intr_unlink)
+ fusbh200->intr_unlink_last->unlink_next = qh;
+ else
+ fusbh200->intr_unlink = qh;
+ fusbh200->intr_unlink_last = qh;
+
+ if (fusbh200->intr_unlinking)
+ ; /* Avoid recursive calls */
+ else if (fusbh200->rh_state < FUSBH200_RH_RUNNING)
+ fusbh200_handle_intr_unlinks(fusbh200);
+ else if (fusbh200->intr_unlink == qh) {
+ fusbh200_enable_event(fusbh200, FUSBH200_HRTIMER_UNLINK_INTR, true);
+ ++fusbh200->intr_unlink_cycle;
+ }
+}
+
+static void end_unlink_intr(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ struct fusbh200_qh_hw *hw = qh->hw;
+ int rc;
+
+ qh->qh_state = QH_STATE_IDLE;
+ hw->hw_next = FUSBH200_LIST_END(fusbh200);
+
+ qh_completions(fusbh200, qh);
+
+ /* reschedule QH iff another request is queued */
+ if (!list_empty(&qh->qtd_list) && fusbh200->rh_state == FUSBH200_RH_RUNNING) {
+ rc = qh_schedule(fusbh200, qh);
+
+ /* An error here likely indicates handshake failure
+ * or no space left in the schedule. Neither fault
+ * should happen often ...
+ *
+ * FIXME kill the now-dysfunctional queued urbs
+ */
+ if (rc != 0)
+ fusbh200_err(fusbh200, "can't reschedule qh %p, err %d\n",
+ qh, rc);
+ }
+
+ /* maybe turn off periodic schedule */
+ --fusbh200->intr_count;
+ disable_periodic(fusbh200);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int check_period (
+ struct fusbh200_hcd *fusbh200,
+ unsigned frame,
+ unsigned uframe,
+ unsigned period,
+ unsigned usecs
+) {
+ int claimed;
+
+ /* complete split running into next frame?
+ * given FSTN support, we could sometimes check...
+ */
+ if (uframe >= 8)
+ return 0;
+
+ /* convert "usecs we need" to "max already claimed" */
+ usecs = fusbh200->uframe_periodic_max - usecs;
+
+ /* we "know" 2 and 4 uframe intervals were rejected; so
+ * for period 0, check _every_ microframe in the schedule.
+ */
+ if (unlikely (period == 0)) {
+ do {
+ for (uframe = 0; uframe < 7; uframe++) {
+ claimed = periodic_usecs (fusbh200, frame, uframe);
+ if (claimed > usecs)
+ return 0;
+ }
+ } while ((frame += 1) < fusbh200->periodic_size);
+
+ /* just check the specified uframe, at that period */
+ } else {
+ do {
+ claimed = periodic_usecs (fusbh200, frame, uframe);
+ if (claimed > usecs)
+ return 0;
+ } while ((frame += period) < fusbh200->periodic_size);
+ }
+
+ // success!
+ return 1;
+}
+
+static int check_intr_schedule (
+ struct fusbh200_hcd *fusbh200,
+ unsigned frame,
+ unsigned uframe,
+ const struct fusbh200_qh *qh,
+ __hc32 *c_maskp
+)
+{
+ int retval = -ENOSPC;
+ u8 mask = 0;
+
+ if (qh->c_usecs && uframe >= 6) /* FSTN territory? */
+ goto done;
+
+ if (!check_period (fusbh200, frame, uframe, qh->period, qh->usecs))
+ goto done;
+ if (!qh->c_usecs) {
+ retval = 0;
+ *c_maskp = 0;
+ goto done;
+ }
+
+ /* Make sure this tt's buffer is also available for CSPLITs.
+ * We pessimize a bit; probably the typical full speed case
+ * doesn't need the second CSPLIT.
+ *
+ * NOTE: both SPLIT and CSPLIT could be checked in just
+ * one smart pass...
+ */
+ mask = 0x03 << (uframe + qh->gap_uf);
+ *c_maskp = cpu_to_hc32(fusbh200, mask << 8);
+
+ mask |= 1 << uframe;
+ if (tt_no_collision (fusbh200, qh->period, qh->dev, frame, mask)) {
+ if (!check_period (fusbh200, frame, uframe + qh->gap_uf + 1,
+ qh->period, qh->c_usecs))
+ goto done;
+ if (!check_period (fusbh200, frame, uframe + qh->gap_uf,
+ qh->period, qh->c_usecs))
+ goto done;
+ retval = 0;
+ }
+done:
+ return retval;
+}
+
+/* "first fit" scheduling policy used the first time through,
+ * or when the previous schedule slot can't be re-used.
+ */
+static int qh_schedule(struct fusbh200_hcd *fusbh200, struct fusbh200_qh *qh)
+{
+ int status;
+ unsigned uframe;
+ __hc32 c_mask;
+ unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */
+ struct fusbh200_qh_hw *hw = qh->hw;
+
+ qh_refresh(fusbh200, qh);
+ hw->hw_next = FUSBH200_LIST_END(fusbh200);
+ frame = qh->start;
+
+ /* reuse the previous schedule slots, if we can */
+ if (frame < qh->period) {
+ uframe = ffs(hc32_to_cpup(fusbh200, &hw->hw_info2) & QH_SMASK);
+ status = check_intr_schedule (fusbh200, frame, --uframe,
+ qh, &c_mask);
+ } else {
+ uframe = 0;
+ c_mask = 0;
+ status = -ENOSPC;
+ }
+
+ /* else scan the schedule to find a group of slots such that all
+ * uframes have enough periodic bandwidth available.
+ */
+ if (status) {
+ /* "normal" case, uframing flexible except with splits */
+ if (qh->period) {
+ int i;
+
+ for (i = qh->period; status && i > 0; --i) {
+ frame = ++fusbh200->random_frame % qh->period;
+ for (uframe = 0; uframe < 8; uframe++) {
+ status = check_intr_schedule (fusbh200,
+ frame, uframe, qh,
+ &c_mask);
+ if (status == 0)
+ break;
+ }
+ }
+
+ /* qh->period == 0 means every uframe */
+ } else {
+ frame = 0;
+ status = check_intr_schedule (fusbh200, 0, 0, qh, &c_mask);
+ }
+ if (status)
+ goto done;
+ qh->start = frame;
+
+ /* reset S-frame and (maybe) C-frame masks */
+ hw->hw_info2 &= cpu_to_hc32(fusbh200, ~(QH_CMASK | QH_SMASK));
+ hw->hw_info2 |= qh->period
+ ? cpu_to_hc32(fusbh200, 1 << uframe)
+ : cpu_to_hc32(fusbh200, QH_SMASK);
+ hw->hw_info2 |= c_mask;
+ } else
+ fusbh200_dbg (fusbh200, "reused qh %p schedule\n", qh);
+
+ /* stuff into the periodic schedule */
+ qh_link_periodic(fusbh200, qh);
+done:
+ return status;
+}
+
+static int intr_submit (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ struct list_head *qtd_list,
+ gfp_t mem_flags
+) {
+ unsigned epnum;
+ unsigned long flags;
+ struct fusbh200_qh *qh;
+ int status;
+ struct list_head empty;
+
+ /* get endpoint and transfer/schedule data */
+ epnum = urb->ep->desc.bEndpointAddress;
+
+ spin_lock_irqsave (&fusbh200->lock, flags);
+
+ if (unlikely(!HCD_HW_ACCESSIBLE(fusbh200_to_hcd(fusbh200)))) {
+ status = -ESHUTDOWN;
+ goto done_not_linked;
+ }
+ status = usb_hcd_link_urb_to_ep(fusbh200_to_hcd(fusbh200), urb);
+ if (unlikely(status))
+ goto done_not_linked;
+
+ /* get qh and force any scheduling errors */
+ INIT_LIST_HEAD (&empty);
+ qh = qh_append_tds(fusbh200, urb, &empty, epnum, &urb->ep->hcpriv);
+ if (qh == NULL) {
+ status = -ENOMEM;
+ goto done;
+ }
+ if (qh->qh_state == QH_STATE_IDLE) {
+ if ((status = qh_schedule (fusbh200, qh)) != 0)
+ goto done;
+ }
+
+ /* then queue the urb's tds to the qh */
+ qh = qh_append_tds(fusbh200, urb, qtd_list, epnum, &urb->ep->hcpriv);
+ BUG_ON (qh == NULL);
+
+ /* ... update usbfs periodic stats */
+ fusbh200_to_hcd(fusbh200)->self.bandwidth_int_reqs++;
+
+done:
+ if (unlikely(status))
+ usb_hcd_unlink_urb_from_ep(fusbh200_to_hcd(fusbh200), urb);
+done_not_linked:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ if (status)
+ qtd_list_free (fusbh200, urb, qtd_list);
+
+ return status;
+}
+
+static void scan_intr(struct fusbh200_hcd *fusbh200)
+{
+ struct fusbh200_qh *qh;
+
+ list_for_each_entry_safe(qh, fusbh200->qh_scan_next, &fusbh200->intr_qh_list,
+ intr_node) {
+ rescan:
+ /* clean any finished work for this qh */
+ if (!list_empty(&qh->qtd_list)) {
+ int temp;
+
+ /*
+ * Unlinks could happen here; completion reporting
+ * drops the lock. That's why fusbh200->qh_scan_next
+ * always holds the next qh to scan; if the next qh
+ * gets unlinked then fusbh200->qh_scan_next is adjusted
+ * in qh_unlink_periodic().
+ */
+ temp = qh_completions(fusbh200, qh);
+ if (unlikely(qh->needs_rescan ||
+ (list_empty(&qh->qtd_list) &&
+ qh->qh_state == QH_STATE_LINKED)))
+ start_unlink_intr(fusbh200, qh);
+ else if (temp != 0)
+ goto rescan;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* fusbh200_iso_stream ops work with both ITD and SITD */
+
+static struct fusbh200_iso_stream *
+iso_stream_alloc (gfp_t mem_flags)
+{
+ struct fusbh200_iso_stream *stream;
+
+ stream = kzalloc(sizeof *stream, mem_flags);
+ if (likely (stream != NULL)) {
+ INIT_LIST_HEAD(&stream->td_list);
+ INIT_LIST_HEAD(&stream->free_list);
+ stream->next_uframe = -1;
+ }
+ return stream;
+}
+
+static void
+iso_stream_init (
+ struct fusbh200_hcd *fusbh200,
+ struct fusbh200_iso_stream *stream,
+ struct usb_device *dev,
+ int pipe,
+ unsigned interval
+)
+{
+ u32 buf1;
+ unsigned epnum, maxp;
+ int is_input;
+ long bandwidth;
+ unsigned multi;
+
+ /*
+ * this might be a "high bandwidth" highspeed endpoint,
+ * as encoded in the ep descriptor's wMaxPacket field
+ */
+ epnum = usb_pipeendpoint (pipe);
+ is_input = usb_pipein (pipe) ? USB_DIR_IN : 0;
+ maxp = usb_maxpacket(dev, pipe, !is_input);
+ if (is_input) {
+ buf1 = (1 << 11);
+ } else {
+ buf1 = 0;
+ }
+
+ maxp = max_packet(maxp);
+ multi = hb_mult(maxp);
+ buf1 |= maxp;
+ maxp *= multi;
+
+ stream->buf0 = cpu_to_hc32(fusbh200, (epnum << 8) | dev->devnum);
+ stream->buf1 = cpu_to_hc32(fusbh200, buf1);
+ stream->buf2 = cpu_to_hc32(fusbh200, multi);
+
+ /* usbfs wants to report the average usecs per frame tied up
+ * when transfers on this endpoint are scheduled ...
+ */
+ if (dev->speed == USB_SPEED_FULL) {
+ interval <<= 3;
+ stream->usecs = NS_TO_US(usb_calc_bus_time(dev->speed,
+ is_input, 1, maxp));
+ stream->usecs /= 8;
+ } else {
+ stream->highspeed = 1;
+ stream->usecs = HS_USECS_ISO (maxp);
+ }
+ bandwidth = stream->usecs * 8;
+ bandwidth /= interval;
+
+ stream->bandwidth = bandwidth;
+ stream->udev = dev;
+ stream->bEndpointAddress = is_input | epnum;
+ stream->interval = interval;
+ stream->maxp = maxp;
+}
+
+static struct fusbh200_iso_stream *
+iso_stream_find (struct fusbh200_hcd *fusbh200, struct urb *urb)
+{
+ unsigned epnum;
+ struct fusbh200_iso_stream *stream;
+ struct usb_host_endpoint *ep;
+ unsigned long flags;
+
+ epnum = usb_pipeendpoint (urb->pipe);
+ if (usb_pipein(urb->pipe))
+ ep = urb->dev->ep_in[epnum];
+ else
+ ep = urb->dev->ep_out[epnum];
+
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ stream = ep->hcpriv;
+
+ if (unlikely (stream == NULL)) {
+ stream = iso_stream_alloc(GFP_ATOMIC);
+ if (likely (stream != NULL)) {
+ ep->hcpriv = stream;
+ stream->ep = ep;
+ iso_stream_init(fusbh200, stream, urb->dev, urb->pipe,
+ urb->interval);
+ }
+
+ /* if dev->ep [epnum] is a QH, hw is set */
+ } else if (unlikely (stream->hw != NULL)) {
+ fusbh200_dbg (fusbh200, "dev %s ep%d%s, not iso??\n",
+ urb->dev->devpath, epnum,
+ usb_pipein(urb->pipe) ? "in" : "out");
+ stream = NULL;
+ }
+
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ return stream;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* fusbh200_iso_sched ops can be ITD-only or SITD-only */
+
+static struct fusbh200_iso_sched *
+iso_sched_alloc (unsigned packets, gfp_t mem_flags)
+{
+ struct fusbh200_iso_sched *iso_sched;
+ int size = sizeof *iso_sched;
+
+ size += packets * sizeof (struct fusbh200_iso_packet);
+ iso_sched = kzalloc(size, mem_flags);
+ if (likely (iso_sched != NULL)) {
+ INIT_LIST_HEAD (&iso_sched->td_list);
+ }
+ return iso_sched;
+}
+
+static inline void
+itd_sched_init(
+ struct fusbh200_hcd *fusbh200,
+ struct fusbh200_iso_sched *iso_sched,
+ struct fusbh200_iso_stream *stream,
+ struct urb *urb
+)
+{
+ unsigned i;
+ dma_addr_t dma = urb->transfer_dma;
+
+ /* how many uframes are needed for these transfers */
+ iso_sched->span = urb->number_of_packets * stream->interval;
+
+ /* figure out per-uframe itd fields that we'll need later
+ * when we fit new itds into the schedule.
+ */
+ for (i = 0; i < urb->number_of_packets; i++) {
+ struct fusbh200_iso_packet *uframe = &iso_sched->packet [i];
+ unsigned length;
+ dma_addr_t buf;
+ u32 trans;
+
+ length = urb->iso_frame_desc [i].length;
+ buf = dma + urb->iso_frame_desc [i].offset;
+
+ trans = FUSBH200_ISOC_ACTIVE;
+ trans |= buf & 0x0fff;
+ if (unlikely (((i + 1) == urb->number_of_packets))
+ && !(urb->transfer_flags & URB_NO_INTERRUPT))
+ trans |= FUSBH200_ITD_IOC;
+ trans |= length << 16;
+ uframe->transaction = cpu_to_hc32(fusbh200, trans);
+
+ /* might need to cross a buffer page within a uframe */
+ uframe->bufp = (buf & ~(u64)0x0fff);
+ buf += length;
+ if (unlikely ((uframe->bufp != (buf & ~(u64)0x0fff))))
+ uframe->cross = 1;
+ }
+}
+
+static void
+iso_sched_free (
+ struct fusbh200_iso_stream *stream,
+ struct fusbh200_iso_sched *iso_sched
+)
+{
+ if (!iso_sched)
+ return;
+ // caller must hold fusbh200->lock!
+ list_splice (&iso_sched->td_list, &stream->free_list);
+ kfree (iso_sched);
+}
+
+static int
+itd_urb_transaction (
+ struct fusbh200_iso_stream *stream,
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ gfp_t mem_flags
+)
+{
+ struct fusbh200_itd *itd;
+ dma_addr_t itd_dma;
+ int i;
+ unsigned num_itds;
+ struct fusbh200_iso_sched *sched;
+ unsigned long flags;
+
+ sched = iso_sched_alloc (urb->number_of_packets, mem_flags);
+ if (unlikely (sched == NULL))
+ return -ENOMEM;
+
+ itd_sched_init(fusbh200, sched, stream, urb);
+
+ if (urb->interval < 8)
+ num_itds = 1 + (sched->span + 7) / 8;
+ else
+ num_itds = urb->number_of_packets;
+
+ /* allocate/init ITDs */
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ for (i = 0; i < num_itds; i++) {
+
+ /*
+ * Use iTDs from the free list, but not iTDs that may
+ * still be in use by the hardware.
+ */
+ if (likely(!list_empty(&stream->free_list))) {
+ itd = list_first_entry(&stream->free_list,
+ struct fusbh200_itd, itd_list);
+ if (itd->frame == fusbh200->now_frame)
+ goto alloc_itd;
+ list_del (&itd->itd_list);
+ itd_dma = itd->itd_dma;
+ } else {
+ alloc_itd:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ itd = dma_pool_alloc (fusbh200->itd_pool, mem_flags,
+ &itd_dma);
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ if (!itd) {
+ iso_sched_free(stream, sched);
+ spin_unlock_irqrestore(&fusbh200->lock, flags);
+ return -ENOMEM;
+ }
+ }
+
+ memset (itd, 0, sizeof *itd);
+ itd->itd_dma = itd_dma;
+ list_add (&itd->itd_list, &sched->td_list);
+ }
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+
+ /* temporarily store schedule info in hcpriv */
+ urb->hcpriv = sched;
+ urb->error_count = 0;
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline int
+itd_slot_ok (
+ struct fusbh200_hcd *fusbh200,
+ u32 mod,
+ u32 uframe,
+ u8 usecs,
+ u32 period
+)
+{
+ uframe %= period;
+ do {
+ /* can't commit more than uframe_periodic_max usec */
+ if (periodic_usecs (fusbh200, uframe >> 3, uframe & 0x7)
+ > (fusbh200->uframe_periodic_max - usecs))
+ return 0;
+
+ /* we know urb->interval is 2^N uframes */
+ uframe += period;
+ } while (uframe < mod);
+ return 1;
+}
+
+/*
+ * This scheduler plans almost as far into the future as it has actual
+ * periodic schedule slots. (Affected by TUNE_FLS, which defaults to
+ * "as small as possible" to be cache-friendlier.) That limits the size
+ * transfers you can stream reliably; avoid more than 64 msec per urb.
+ * Also avoid queue depths of less than fusbh200's worst irq latency (affected
+ * by the per-urb URB_NO_INTERRUPT hint, the log2_irq_thresh module parameter,
+ * and other factors); or more than about 230 msec total (for portability,
+ * given FUSBH200_TUNE_FLS and the slop). Or, write a smarter scheduler!
+ */
+
+#define SCHEDULE_SLOP 80 /* microframes */
+
+static int
+iso_stream_schedule (
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ struct fusbh200_iso_stream *stream
+)
+{
+ u32 now, next, start, period, span;
+ int status;
+ unsigned mod = fusbh200->periodic_size << 3;
+ struct fusbh200_iso_sched *sched = urb->hcpriv;
+
+ period = urb->interval;
+ span = sched->span;
+
+ if (span > mod - SCHEDULE_SLOP) {
+ fusbh200_dbg (fusbh200, "iso request %p too long\n", urb);
+ status = -EFBIG;
+ goto fail;
+ }
+
+ now = fusbh200_read_frame_index(fusbh200) & (mod - 1);
+
+ /* Typical case: reuse current schedule, stream is still active.
+ * Hopefully there are no gaps from the host falling behind
+ * (irq delays etc), but if there are we'll take the next
+ * slot in the schedule, implicitly assuming URB_ISO_ASAP.
+ */
+ if (likely (!list_empty (&stream->td_list))) {
+ u32 excess;
+
+ /* For high speed devices, allow scheduling within the
+ * isochronous scheduling threshold. For full speed devices
+ * and Intel PCI-based controllers, don't (work around for
+ * Intel ICH9 bug).
+ */
+ if (!stream->highspeed && fusbh200->fs_i_thresh)
+ next = now + fusbh200->i_thresh;
+ else
+ next = now;
+
+ /* Fell behind (by up to twice the slop amount)?
+ * We decide based on the time of the last currently-scheduled
+ * slot, not the time of the next available slot.
+ */
+ excess = (stream->next_uframe - period - next) & (mod - 1);
+ if (excess >= mod - 2 * SCHEDULE_SLOP)
+ start = next + excess - mod + period *
+ DIV_ROUND_UP(mod - excess, period);
+ else
+ start = next + excess + period;
+ if (start - now >= mod) {
+ fusbh200_dbg(fusbh200, "request %p would overflow (%d+%d >= %d)\n",
+ urb, start - now - period, period,
+ mod);
+ status = -EFBIG;
+ goto fail;
+ }
+ }
+
+ /* need to schedule; when's the next (u)frame we could start?
+ * this is bigger than fusbh200->i_thresh allows; scheduling itself
+ * isn't free, the slop should handle reasonably slow cpus. it
+ * can also help high bandwidth if the dma and irq loads don't
+ * jump until after the queue is primed.
+ */
+ else {
+ int done = 0;
+ start = SCHEDULE_SLOP + (now & ~0x07);
+
+ /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
+
+ /* find a uframe slot with enough bandwidth.
+ * Early uframes are more precious because full-speed
+ * iso IN transfers can't use late uframes,
+ * and therefore they should be allocated last.
+ */
+ next = start;
+ start += period;
+ do {
+ start--;
+ /* check schedule: enough space? */
+ if (itd_slot_ok(fusbh200, mod, start,
+ stream->usecs, period))
+ done = 1;
+ } while (start > next && !done);
+
+ /* no room in the schedule */
+ if (!done) {
+ fusbh200_dbg(fusbh200, "iso resched full %p (now %d max %d)\n",
+ urb, now, now + mod);
+ status = -ENOSPC;
+ goto fail;
+ }
+ }
+
+ /* Tried to schedule too far into the future? */
+ if (unlikely(start - now + span - period
+ >= mod - 2 * SCHEDULE_SLOP)) {
+ fusbh200_dbg(fusbh200, "request %p would overflow (%d+%d >= %d)\n",
+ urb, start - now, span - period,
+ mod - 2 * SCHEDULE_SLOP);
+ status = -EFBIG;
+ goto fail;
+ }
+
+ stream->next_uframe = start & (mod - 1);
+
+ /* report high speed start in uframes; full speed, in frames */
+ urb->start_frame = stream->next_uframe;
+ if (!stream->highspeed)
+ urb->start_frame >>= 3;
+
+ /* Make sure scan_isoc() sees these */
+ if (fusbh200->isoc_count == 0)
+ fusbh200->next_frame = now >> 3;
+ return 0;
+
+ fail:
+ iso_sched_free(stream, sched);
+ urb->hcpriv = NULL;
+ return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void
+itd_init(struct fusbh200_hcd *fusbh200, struct fusbh200_iso_stream *stream,
+ struct fusbh200_itd *itd)
+{
+ int i;
+
+ /* it's been recently zeroed */
+ itd->hw_next = FUSBH200_LIST_END(fusbh200);
+ itd->hw_bufp [0] = stream->buf0;
+ itd->hw_bufp [1] = stream->buf1;
+ itd->hw_bufp [2] = stream->buf2;
+
+ for (i = 0; i < 8; i++)
+ itd->index[i] = -1;
+
+ /* All other fields are filled when scheduling */
+}
+
+static inline void
+itd_patch(
+ struct fusbh200_hcd *fusbh200,
+ struct fusbh200_itd *itd,
+ struct fusbh200_iso_sched *iso_sched,
+ unsigned index,
+ u16 uframe
+)
+{
+ struct fusbh200_iso_packet *uf = &iso_sched->packet [index];
+ unsigned pg = itd->pg;
+
+ // BUG_ON (pg == 6 && uf->cross);
+
+ uframe &= 0x07;
+ itd->index [uframe] = index;
+
+ itd->hw_transaction[uframe] = uf->transaction;
+ itd->hw_transaction[uframe] |= cpu_to_hc32(fusbh200, pg << 12);
+ itd->hw_bufp[pg] |= cpu_to_hc32(fusbh200, uf->bufp & ~(u32)0);
+ itd->hw_bufp_hi[pg] |= cpu_to_hc32(fusbh200, (u32)(uf->bufp >> 32));
+
+ /* iso_frame_desc[].offset must be strictly increasing */
+ if (unlikely (uf->cross)) {
+ u64 bufp = uf->bufp + 4096;
+
+ itd->pg = ++pg;
+ itd->hw_bufp[pg] |= cpu_to_hc32(fusbh200, bufp & ~(u32)0);
+ itd->hw_bufp_hi[pg] |= cpu_to_hc32(fusbh200, (u32)(bufp >> 32));
+ }
+}
+
+static inline void
+itd_link (struct fusbh200_hcd *fusbh200, unsigned frame, struct fusbh200_itd *itd)
+{
+ union fusbh200_shadow *prev = &fusbh200->pshadow[frame];
+ __hc32 *hw_p = &fusbh200->periodic[frame];
+ union fusbh200_shadow here = *prev;
+ __hc32 type = 0;
+
+ /* skip any iso nodes which might belong to previous microframes */
+ while (here.ptr) {
+ type = Q_NEXT_TYPE(fusbh200, *hw_p);
+ if (type == cpu_to_hc32(fusbh200, Q_TYPE_QH))
+ break;
+ prev = periodic_next_shadow(fusbh200, prev, type);
+ hw_p = shadow_next_periodic(fusbh200, &here, type);
+ here = *prev;
+ }
+
+ itd->itd_next = here;
+ itd->hw_next = *hw_p;
+ prev->itd = itd;
+ itd->frame = frame;
+ wmb ();
+ *hw_p = cpu_to_hc32(fusbh200, itd->itd_dma | Q_TYPE_ITD);
+}
+
+/* fit urb's itds into the selected schedule slot; activate as needed */
+static void itd_link_urb(
+ struct fusbh200_hcd *fusbh200,
+ struct urb *urb,
+ unsigned mod,
+ struct fusbh200_iso_stream *stream
+)
+{
+ int packet;
+ unsigned next_uframe, uframe, frame;
+ struct fusbh200_iso_sched *iso_sched = urb->hcpriv;
+ struct fusbh200_itd *itd;
+
+ next_uframe = stream->next_uframe & (mod - 1);
+
+ if (unlikely (list_empty(&stream->td_list))) {
+ fusbh200_to_hcd(fusbh200)->self.bandwidth_allocated
+ += stream->bandwidth;
+ fusbh200_vdbg (fusbh200,
+ "schedule devp %s ep%d%s-iso period %d start %d.%d\n",
+ urb->dev->devpath, stream->bEndpointAddress & 0x0f,
+ (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
+ urb->interval,
+ next_uframe >> 3, next_uframe & 0x7);
+ }
+
+ /* fill iTDs uframe by uframe */
+ for (packet = 0, itd = NULL; packet < urb->number_of_packets; ) {
+ if (itd == NULL) {
+ /* ASSERT: we have all necessary itds */
+ // BUG_ON (list_empty (&iso_sched->td_list));
+
+ /* ASSERT: no itds for this endpoint in this uframe */
+
+ itd = list_entry (iso_sched->td_list.next,
+ struct fusbh200_itd, itd_list);
+ list_move_tail (&itd->itd_list, &stream->td_list);
+ itd->stream = stream;
+ itd->urb = urb;
+ itd_init (fusbh200, stream, itd);
+ }
+
+ uframe = next_uframe & 0x07;
+ frame = next_uframe >> 3;
+
+ itd_patch(fusbh200, itd, iso_sched, packet, uframe);
+
+ next_uframe += stream->interval;
+ next_uframe &= mod - 1;
+ packet++;
+
+ /* link completed itds into the schedule */
+ if (((next_uframe >> 3) != frame)
+ || packet == urb->number_of_packets) {
+ itd_link(fusbh200, frame & (fusbh200->periodic_size - 1), itd);
+ itd = NULL;
+ }
+ }
+ stream->next_uframe = next_uframe;
+
+ /* don't need that schedule data any more */
+ iso_sched_free (stream, iso_sched);
+ urb->hcpriv = NULL;
+
+ ++fusbh200->isoc_count;
+ enable_periodic(fusbh200);
+}
+
+#define ISO_ERRS (FUSBH200_ISOC_BUF_ERR | FUSBH200_ISOC_BABBLE | FUSBH200_ISOC_XACTERR)
+
+/* Process and recycle a completed ITD. Return true iff its urb completed,
+ * and hence its completion callback probably added things to the hardware
+ * schedule.
+ *
+ * Note that we carefully avoid recycling this descriptor until after any
+ * completion callback runs, so that it won't be reused quickly. That is,
+ * assuming (a) no more than two urbs per frame on this endpoint, and also
+ * (b) only this endpoint's completions submit URBs. It seems some silicon
+ * corrupts things if you reuse completed descriptors very quickly...
+ */
+static bool itd_complete(struct fusbh200_hcd *fusbh200, struct fusbh200_itd *itd)
+{
+ struct urb *urb = itd->urb;
+ struct usb_iso_packet_descriptor *desc;
+ u32 t;
+ unsigned uframe;
+ int urb_index = -1;
+ struct fusbh200_iso_stream *stream = itd->stream;
+ struct usb_device *dev;
+ bool retval = false;
+
+ /* for each uframe with a packet */
+ for (uframe = 0; uframe < 8; uframe++) {
+ if (likely (itd->index[uframe] == -1))
+ continue;
+ urb_index = itd->index[uframe];
+ desc = &urb->iso_frame_desc [urb_index];
+
+ t = hc32_to_cpup(fusbh200, &itd->hw_transaction [uframe]);
+ itd->hw_transaction [uframe] = 0;
+
+ /* report transfer status */
+ if (unlikely (t & ISO_ERRS)) {
+ urb->error_count++;
+ if (t & FUSBH200_ISOC_BUF_ERR)
+ desc->status = usb_pipein (urb->pipe)
+ ? -ENOSR /* hc couldn't read */
+ : -ECOMM; /* hc couldn't write */
+ else if (t & FUSBH200_ISOC_BABBLE)
+ desc->status = -EOVERFLOW;
+ else /* (t & FUSBH200_ISOC_XACTERR) */
+ desc->status = -EPROTO;
+
+ /* HC need not update length with this error */
+ if (!(t & FUSBH200_ISOC_BABBLE)) {
+ desc->actual_length = fusbh200_itdlen(urb, desc, t);
+ urb->actual_length += desc->actual_length;
+ }
+ } else if (likely ((t & FUSBH200_ISOC_ACTIVE) == 0)) {
+ desc->status = 0;
+ desc->actual_length = fusbh200_itdlen(urb, desc, t);
+ urb->actual_length += desc->actual_length;
+ } else {
+ /* URB was too late */
+ desc->status = -EXDEV;
+ }
+ }
+
+ /* handle completion now? */
+ if (likely ((urb_index + 1) != urb->number_of_packets))
+ goto done;
+
+ /* ASSERT: it's really the last itd for this urb
+ list_for_each_entry (itd, &stream->td_list, itd_list)
+ BUG_ON (itd->urb == urb);
+ */
+
+ /* give urb back to the driver; completion often (re)submits */
+ dev = urb->dev;
+ fusbh200_urb_done(fusbh200, urb, 0);
+ retval = true;
+ urb = NULL;
+
+ --fusbh200->isoc_count;
+ disable_periodic(fusbh200);
+
+ if (unlikely(list_is_singular(&stream->td_list))) {
+ fusbh200_to_hcd(fusbh200)->self.bandwidth_allocated
+ -= stream->bandwidth;
+ fusbh200_vdbg (fusbh200,
+ "deschedule devp %s ep%d%s-iso\n",
+ dev->devpath, stream->bEndpointAddress & 0x0f,
+ (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
+ }
+
+done:
+ itd->urb = NULL;
+
+ /* Add to the end of the free list for later reuse */
+ list_move_tail(&itd->itd_list, &stream->free_list);
+
+ /* Recycle the iTDs when the pipeline is empty (ep no longer in use) */
+ if (list_empty(&stream->td_list)) {
+ list_splice_tail_init(&stream->free_list,
+ &fusbh200->cached_itd_list);
+ start_free_itds(fusbh200);
+ }
+
+ return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int itd_submit (struct fusbh200_hcd *fusbh200, struct urb *urb,
+ gfp_t mem_flags)
+{
+ int status = -EINVAL;
+ unsigned long flags;
+ struct fusbh200_iso_stream *stream;
+
+ /* Get iso_stream head */
+ stream = iso_stream_find (fusbh200, urb);
+ if (unlikely (stream == NULL)) {
+ fusbh200_dbg (fusbh200, "can't get iso stream\n");
+ return -ENOMEM;
+ }
+ if (unlikely (urb->interval != stream->interval &&
+ fusbh200_port_speed(fusbh200, 0) == USB_PORT_STAT_HIGH_SPEED)) {
+ fusbh200_dbg (fusbh200, "can't change iso interval %d --> %d\n",
+ stream->interval, urb->interval);
+ goto done;
+ }
+
+#ifdef FUSBH200_URB_TRACE
+ fusbh200_dbg (fusbh200,
+ "%s %s urb %p ep%d%s len %d, %d pkts %d uframes [%p]\n",
+ __func__, urb->dev->devpath, urb,
+ usb_pipeendpoint (urb->pipe),
+ usb_pipein (urb->pipe) ? "in" : "out",
+ urb->transfer_buffer_length,
+ urb->number_of_packets, urb->interval,
+ stream);
+#endif
+
+ /* allocate ITDs w/o locking anything */
+ status = itd_urb_transaction (stream, fusbh200, urb, mem_flags);
+ if (unlikely (status < 0)) {
+ fusbh200_dbg (fusbh200, "can't init itds\n");
+ goto done;
+ }
+
+ /* schedule ... need to lock */
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ if (unlikely(!HCD_HW_ACCESSIBLE(fusbh200_to_hcd(fusbh200)))) {
+ status = -ESHUTDOWN;
+ goto done_not_linked;
+ }
+ status = usb_hcd_link_urb_to_ep(fusbh200_to_hcd(fusbh200), urb);
+ if (unlikely(status))
+ goto done_not_linked;
+ status = iso_stream_schedule(fusbh200, urb, stream);
+ if (likely (status == 0))
+ itd_link_urb (fusbh200, urb, fusbh200->periodic_size << 3, stream);
+ else
+ usb_hcd_unlink_urb_from_ep(fusbh200_to_hcd(fusbh200), urb);
+ done_not_linked:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ done:
+ return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void scan_isoc(struct fusbh200_hcd *fusbh200)
+{
+ unsigned uf, now_frame, frame;
+ unsigned fmask = fusbh200->periodic_size - 1;
+ bool modified, live;
+
+ /*
+ * When running, scan from last scan point up to "now"
+ * else clean up by scanning everything that's left.
+ * Touches as few pages as possible: cache-friendly.
+ */
+ if (fusbh200->rh_state >= FUSBH200_RH_RUNNING) {
+ uf = fusbh200_read_frame_index(fusbh200);
+ now_frame = (uf >> 3) & fmask;
+ live = true;
+ } else {
+ now_frame = (fusbh200->next_frame - 1) & fmask;
+ live = false;
+ }
+ fusbh200->now_frame = now_frame;
+
+ frame = fusbh200->next_frame;
+ for (;;) {
+ union fusbh200_shadow q, *q_p;
+ __hc32 type, *hw_p;
+
+restart:
+ /* scan each element in frame's queue for completions */
+ q_p = &fusbh200->pshadow [frame];
+ hw_p = &fusbh200->periodic [frame];
+ q.ptr = q_p->ptr;
+ type = Q_NEXT_TYPE(fusbh200, *hw_p);
+ modified = false;
+
+ while (q.ptr != NULL) {
+ switch (hc32_to_cpu(fusbh200, type)) {
+ case Q_TYPE_ITD:
+ /* If this ITD is still active, leave it for
+ * later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
+ */
+ if (frame == now_frame && live) {
+ rmb();
+ for (uf = 0; uf < 8; uf++) {
+ if (q.itd->hw_transaction[uf] &
+ ITD_ACTIVE(fusbh200))
+ break;
+ }
+ if (uf < 8) {
+ q_p = &q.itd->itd_next;
+ hw_p = &q.itd->hw_next;
+ type = Q_NEXT_TYPE(fusbh200,
+ q.itd->hw_next);
+ q = *q_p;
+ break;
+ }
+ }
+
+ /* Take finished ITDs out of the schedule
+ * and process them: recycle, maybe report
+ * URB completion. HC won't cache the
+ * pointer for much longer, if at all.
+ */
+ *q_p = q.itd->itd_next;
+ *hw_p = q.itd->hw_next;
+ type = Q_NEXT_TYPE(fusbh200, q.itd->hw_next);
+ wmb();
+ modified = itd_complete (fusbh200, q.itd);
+ q = *q_p;
+ break;
+ default:
+ fusbh200_dbg(fusbh200, "corrupt type %d frame %d shadow %p\n",
+ type, frame, q.ptr);
+ // BUG ();
+ /* FALL THROUGH */
+ case Q_TYPE_QH:
+ case Q_TYPE_FSTN:
+ /* End of the iTDs and siTDs */
+ q.ptr = NULL;
+ break;
+ }
+
+ /* assume completion callbacks modify the queue */
+ if (unlikely(modified && fusbh200->isoc_count > 0))
+ goto restart;
+ }
+
+ /* Stop when we have reached the current frame */
+ if (frame == now_frame)
+ break;
+ frame = (frame + 1) & fmask;
+ }
+ fusbh200->next_frame = now_frame;
+}
+/*-------------------------------------------------------------------------*/
+/*
+ * Display / Set uframe_periodic_max
+ */
+static ssize_t show_uframe_periodic_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fusbh200_hcd *fusbh200;
+ int n;
+
+ fusbh200 = hcd_to_fusbh200(bus_to_hcd(dev_get_drvdata(dev)));
+ n = scnprintf(buf, PAGE_SIZE, "%d\n", fusbh200->uframe_periodic_max);
+ return n;
+}
+
+
+static ssize_t store_uframe_periodic_max(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fusbh200_hcd *fusbh200;
+ unsigned uframe_periodic_max;
+ unsigned frame, uframe;
+ unsigned short allocated_max;
+ unsigned long flags;
+ ssize_t ret;
+
+ fusbh200 = hcd_to_fusbh200(bus_to_hcd(dev_get_drvdata(dev)));
+ if (kstrtouint(buf, 0, &uframe_periodic_max) < 0)
+ return -EINVAL;
+
+ if (uframe_periodic_max < 100 || uframe_periodic_max >= 125) {
+ fusbh200_info(fusbh200, "rejecting invalid request for "
+ "uframe_periodic_max=%u\n", uframe_periodic_max);
+ return -EINVAL;
+ }
+
+ ret = -EINVAL;
+
+ /*
+ * lock, so that our checking does not race with possible periodic
+ * bandwidth allocation through submitting new urbs.
+ */
+ spin_lock_irqsave (&fusbh200->lock, flags);
+
+ /*
+ * for request to decrease max periodic bandwidth, we have to check
+ * every microframe in the schedule to see whether the decrease is
+ * possible.
+ */
+ if (uframe_periodic_max < fusbh200->uframe_periodic_max) {
+ allocated_max = 0;
+
+ for (frame = 0; frame < fusbh200->periodic_size; ++frame)
+ for (uframe = 0; uframe < 7; ++uframe)
+ allocated_max = max(allocated_max,
+ periodic_usecs (fusbh200, frame, uframe));
+
+ if (allocated_max > uframe_periodic_max) {
+ fusbh200_info(fusbh200,
+ "cannot decrease uframe_periodic_max becase "
+ "periodic bandwidth is already allocated "
+ "(%u > %u)\n",
+ allocated_max, uframe_periodic_max);
+ goto out_unlock;
+ }
+ }
+
+ /* increasing is always ok */
+
+ fusbh200_info(fusbh200, "setting max periodic bandwidth to %u%% "
+ "(== %u usec/uframe)\n",
+ 100*uframe_periodic_max/125, uframe_periodic_max);
+
+ if (uframe_periodic_max != 100)
+ fusbh200_warn(fusbh200, "max periodic bandwidth set is non-standard\n");
+
+ fusbh200->uframe_periodic_max = uframe_periodic_max;
+ ret = count;
+
+out_unlock:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ return ret;
+}
+static DEVICE_ATTR(uframe_periodic_max, 0644, show_uframe_periodic_max, store_uframe_periodic_max);
+
+
+static inline int create_sysfs_files(struct fusbh200_hcd *fusbh200)
+{
+ struct device *controller = fusbh200_to_hcd(fusbh200)->self.controller;
+ int i = 0;
+
+ if (i)
+ goto out;
+
+ i = device_create_file(controller, &dev_attr_uframe_periodic_max);
+out:
+ return i;
+}
+
+static inline void remove_sysfs_files(struct fusbh200_hcd *fusbh200)
+{
+ struct device *controller = fusbh200_to_hcd(fusbh200)->self.controller;
+
+ device_remove_file(controller, &dev_attr_uframe_periodic_max);
+}
+/*-------------------------------------------------------------------------*/
+
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void fusbh200_turn_off_all_ports(struct fusbh200_hcd *fusbh200)
+{
+ u32 __iomem *status_reg = &fusbh200->regs->port_status;
+
+ fusbh200_writel(fusbh200, PORT_RWC_BITS, status_reg);
+}
+
+/*
+ * Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void fusbh200_silence_controller(struct fusbh200_hcd *fusbh200)
+{
+ fusbh200_halt(fusbh200);
+
+ spin_lock_irq(&fusbh200->lock);
+ fusbh200->rh_state = FUSBH200_RH_HALTED;
+ fusbh200_turn_off_all_ports(fusbh200);
+ spin_unlock_irq(&fusbh200->lock);
+}
+
+/* fusbh200_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void fusbh200_shutdown(struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200(hcd);
+
+ spin_lock_irq(&fusbh200->lock);
+ fusbh200->shutdown = true;
+ fusbh200->rh_state = FUSBH200_RH_STOPPING;
+ fusbh200->enabled_hrtimer_events = 0;
+ spin_unlock_irq(&fusbh200->lock);
+
+ fusbh200_silence_controller(fusbh200);
+
+ hrtimer_cancel(&fusbh200->hrtimer);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * fusbh200_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping fusbh200->lock.
+ */
+static void fusbh200_work (struct fusbh200_hcd *fusbh200)
+{
+ /* another CPU may drop fusbh200->lock during a schedule scan while
+ * it reports urb completions. this flag guards against bogus
+ * attempts at re-entrant schedule scanning.
+ */
+ if (fusbh200->scanning) {
+ fusbh200->need_rescan = true;
+ return;
+ }
+ fusbh200->scanning = true;
+
+ rescan:
+ fusbh200->need_rescan = false;
+ if (fusbh200->async_count)
+ scan_async(fusbh200);
+ if (fusbh200->intr_count > 0)
+ scan_intr(fusbh200);
+ if (fusbh200->isoc_count > 0)
+ scan_isoc(fusbh200);
+ if (fusbh200->need_rescan)
+ goto rescan;
+ fusbh200->scanning = false;
+
+ /* the IO watchdog guards against hardware or driver bugs that
+ * misplace IRQs, and should let us run completely without IRQs.
+ * such lossage has been observed on both VT6202 and VT8235.
+ */
+ turn_on_io_watchdog(fusbh200);
+}
+
+/*
+ * Called when the fusbh200_hcd module is removed.
+ */
+static void fusbh200_stop (struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+
+ fusbh200_dbg (fusbh200, "stop\n");
+
+ /* no more interrupts ... */
+
+ spin_lock_irq(&fusbh200->lock);
+ fusbh200->enabled_hrtimer_events = 0;
+ spin_unlock_irq(&fusbh200->lock);
+
+ fusbh200_quiesce(fusbh200);
+ fusbh200_silence_controller(fusbh200);
+ fusbh200_reset (fusbh200);
+
+ hrtimer_cancel(&fusbh200->hrtimer);
+ remove_sysfs_files(fusbh200);
+ remove_debug_files (fusbh200);
+
+ /* root hub is shut down separately (first, when possible) */
+ spin_lock_irq (&fusbh200->lock);
+ end_free_itds(fusbh200);
+ spin_unlock_irq (&fusbh200->lock);
+ fusbh200_mem_cleanup (fusbh200);
+
+#ifdef FUSBH200_STATS
+ fusbh200_dbg(fusbh200, "irq normal %ld err %ld iaa %ld (lost %ld)\n",
+ fusbh200->stats.normal, fusbh200->stats.error, fusbh200->stats.iaa,
+ fusbh200->stats.lost_iaa);
+ fusbh200_dbg (fusbh200, "complete %ld unlink %ld\n",
+ fusbh200->stats.complete, fusbh200->stats.unlink);
+#endif
+
+ dbg_status (fusbh200, "fusbh200_stop completed",
+ fusbh200_readl(fusbh200, &fusbh200->regs->status));
+}
+
+/* one-time init, only for memory state */
+static int hcd_fusbh200_init(struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200(hcd);
+ u32 temp;
+ int retval;
+ u32 hcc_params;
+ struct fusbh200_qh_hw *hw;
+
+ spin_lock_init(&fusbh200->lock);
+
+ /*
+ * keep io watchdog by default, those good HCDs could turn off it later
+ */
+ fusbh200->need_io_watchdog = 1;
+
+ hrtimer_init(&fusbh200->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ fusbh200->hrtimer.function = fusbh200_hrtimer_func;
+ fusbh200->next_hrtimer_event = FUSBH200_HRTIMER_NO_EVENT;
+
+ hcc_params = fusbh200_readl(fusbh200, &fusbh200->caps->hcc_params);
+
+ /*
+ * by default set standard 80% (== 100 usec/uframe) max periodic
+ * bandwidth as required by USB 2.0
+ */
+ fusbh200->uframe_periodic_max = 100;
+
+ /*
+ * hw default: 1K periodic list heads, one per frame.
+ * periodic_size can shrink by USBCMD update if hcc_params allows.
+ */
+ fusbh200->periodic_size = DEFAULT_I_TDPS;
+ INIT_LIST_HEAD(&fusbh200->intr_qh_list);
+ INIT_LIST_HEAD(&fusbh200->cached_itd_list);
+
+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+ /* periodic schedule size can be smaller than default */
+ switch (FUSBH200_TUNE_FLS) {
+ case 0: fusbh200->periodic_size = 1024; break;
+ case 1: fusbh200->periodic_size = 512; break;
+ case 2: fusbh200->periodic_size = 256; break;
+ default: BUG();
+ }
+ }
+ if ((retval = fusbh200_mem_init(fusbh200, GFP_KERNEL)) < 0)
+ return retval;
+
+ /* controllers may cache some of the periodic schedule ... */
+ fusbh200->i_thresh = 2;
+
+ /*
+ * dedicate a qh for the async ring head, since we couldn't unlink
+ * a 'real' qh without stopping the async schedule [4.8]. use it
+ * as the 'reclamation list head' too.
+ * its dummy is used in hw_alt_next of many tds, to prevent the qh
+ * from automatically advancing to the next td after short reads.
+ */
+ fusbh200->async->qh_next.qh = NULL;
+ hw = fusbh200->async->hw;
+ hw->hw_next = QH_NEXT(fusbh200, fusbh200->async->qh_dma);
+ hw->hw_info1 = cpu_to_hc32(fusbh200, QH_HEAD);
+ hw->hw_token = cpu_to_hc32(fusbh200, QTD_STS_HALT);
+ hw->hw_qtd_next = FUSBH200_LIST_END(fusbh200);
+ fusbh200->async->qh_state = QH_STATE_LINKED;
+ hw->hw_alt_next = QTD_NEXT(fusbh200, fusbh200->async->dummy->qtd_dma);
+
+ /* clear interrupt enables, set irq latency */
+ if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+ log2_irq_thresh = 0;
+ temp = 1 << (16 + log2_irq_thresh);
+ if (HCC_CANPARK(hcc_params)) {
+ /* HW default park == 3, on hardware that supports it (like
+ * NVidia and ALI silicon), maximizes throughput on the async
+ * schedule by avoiding QH fetches between transfers.
+ *
+ * With fast usb storage devices and NForce2, "park" seems to
+ * make problems: throughput reduction (!), data errors...
+ */
+ if (park) {
+ park = min(park, (unsigned) 3);
+ temp |= CMD_PARK;
+ temp |= park << 8;
+ }
+ fusbh200_dbg(fusbh200, "park %d\n", park);
+ }
+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+ /* periodic schedule size can be smaller than default */
+ temp &= ~(3 << 2);
+ temp |= (FUSBH200_TUNE_FLS << 2);
+ }
+ fusbh200->command = temp;
+
+ /* Accept arbitrarily long scatter-gather lists */
+ if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+ hcd->self.sg_tablesize = ~0;
+ return 0;
+}
+
+/* start HC running; it's halted, hcd_fusbh200_init() has been run (once) */
+static int fusbh200_run (struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ u32 temp;
+ u32 hcc_params;
+
+ hcd->uses_new_polling = 1;
+
+ /* EHCI spec section 4.1 */
+
+ fusbh200_writel(fusbh200, fusbh200->periodic_dma, &fusbh200->regs->frame_list);
+ fusbh200_writel(fusbh200, (u32)fusbh200->async->qh_dma, &fusbh200->regs->async_next);
+
+ /*
+ * hcc_params controls whether fusbh200->regs->segment must (!!!)
+ * be used; it constrains QH/ITD/SITD and QTD locations.
+ * pci_pool consistent memory always uses segment zero.
+ * streaming mappings for I/O buffers, like pci_map_single(),
+ * can return segments above 4GB, if the device allows.
+ *
+ * NOTE: the dma mask is visible through dma_supported(), so
+ * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+ * Scsi_Host.highmem_io, and so forth. It's readonly to all
+ * host side drivers though.
+ */
+ hcc_params = fusbh200_readl(fusbh200, &fusbh200->caps->hcc_params);
+
+ // Philips, Intel, and maybe others need CMD_RUN before the
+ // root hub will detect new devices (why?); NEC doesn't
+ fusbh200->command &= ~(CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+ fusbh200->command |= CMD_RUN;
+ fusbh200_writel(fusbh200, fusbh200->command, &fusbh200->regs->command);
+ dbg_cmd (fusbh200, "init", fusbh200->command);
+
+ /*
+ * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+ * are explicitly handed to companion controller(s), so no TT is
+ * involved with the root hub. (Except where one is integrated,
+ * and there's no companion controller unless maybe for USB OTG.)
+ *
+ * Turning on the CF flag will transfer ownership of all ports
+ * from the companions to the EHCI controller. If any of the
+ * companions are in the middle of a port reset at the time, it
+ * could cause trouble. Write-locking ehci_cf_port_reset_rwsem
+ * guarantees that no resets are in progress. After we set CF,
+ * a short delay lets the hardware catch up; new resets shouldn't
+ * be started before the port switching actions could complete.
+ */
+ down_write(&ehci_cf_port_reset_rwsem);
+ fusbh200->rh_state = FUSBH200_RH_RUNNING;
+ fusbh200_readl(fusbh200, &fusbh200->regs->command); /* unblock posted writes */
+ msleep(5);
+ up_write(&ehci_cf_port_reset_rwsem);
+ fusbh200->last_periodic_enable = ktime_get_real();
+
+ temp = HC_VERSION(fusbh200, fusbh200_readl(fusbh200, &fusbh200->caps->hc_capbase));
+ fusbh200_info (fusbh200,
+ "USB %x.%x started, EHCI %x.%02x\n",
+ ((fusbh200->sbrn & 0xf0)>>4), (fusbh200->sbrn & 0x0f),
+ temp >> 8, temp & 0xff);
+
+ fusbh200_writel(fusbh200, INTR_MASK,
+ &fusbh200->regs->intr_enable); /* Turn On Interrupts */
+
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ create_debug_files(fusbh200);
+ create_sysfs_files(fusbh200);
+
+ return 0;
+}
+
+static int fusbh200_setup(struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200(hcd);
+ int retval;
+
+ fusbh200->regs = (void __iomem *)fusbh200->caps +
+ HC_LENGTH(fusbh200, fusbh200_readl(fusbh200, &fusbh200->caps->hc_capbase));
+ dbg_hcs_params(fusbh200, "reset");
+ dbg_hcc_params(fusbh200, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ fusbh200->hcs_params = fusbh200_readl(fusbh200, &fusbh200->caps->hcs_params);
+
+ fusbh200->sbrn = HCD_USB2;
+
+ /* data structure init */
+ retval = hcd_fusbh200_init(hcd);
+ if (retval)
+ return retval;
+
+ retval = fusbh200_halt(fusbh200);
+ if (retval)
+ return retval;
+
+ fusbh200_reset(fusbh200);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t fusbh200_irq (struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ u32 status, masked_status, pcd_status = 0, cmd;
+ int bh;
+
+ spin_lock (&fusbh200->lock);
+
+ status = fusbh200_readl(fusbh200, &fusbh200->regs->status);
+
+ /* e.g. cardbus physical eject */
+ if (status == ~(u32) 0) {
+ fusbh200_dbg (fusbh200, "device removed\n");
+ goto dead;
+ }
+
+ /*
+ * We don't use STS_FLR, but some controllers don't like it to
+ * remain on, so mask it out along with the other status bits.
+ */
+ masked_status = status & (INTR_MASK | STS_FLR);
+
+ /* Shared IRQ? */
+ if (!masked_status || unlikely(fusbh200->rh_state == FUSBH200_RH_HALTED)) {
+ spin_unlock(&fusbh200->lock);
+ return IRQ_NONE;
+ }
+
+ /* clear (just) interrupts */
+ fusbh200_writel(fusbh200, masked_status, &fusbh200->regs->status);
+ cmd = fusbh200_readl(fusbh200, &fusbh200->regs->command);
+ bh = 0;
+
+#ifdef VERBOSE_DEBUG
+ /* unrequested/ignored: Frame List Rollover */
+ dbg_status (fusbh200, "irq", status);
+#endif
+
+ /* INT, ERR, and IAA interrupt rates can be throttled */
+
+ /* normal [4.15.1.2] or error [4.15.1.1] completion */
+ if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
+ if (likely ((status & STS_ERR) == 0))
+ COUNT (fusbh200->stats.normal);
+ else
+ COUNT (fusbh200->stats.error);
+ bh = 1;
+ }
+
+ /* complete the unlinking of some qh [4.15.2.3] */
+ if (status & STS_IAA) {
+
+ /* Turn off the IAA watchdog */
+ fusbh200->enabled_hrtimer_events &= ~BIT(FUSBH200_HRTIMER_IAA_WATCHDOG);
+
+ /*
+ * Mild optimization: Allow another IAAD to reset the
+ * hrtimer, if one occurs before the next expiration.
+ * In theory we could always cancel the hrtimer, but
+ * tests show that about half the time it will be reset
+ * for some other event anyway.
+ */
+ if (fusbh200->next_hrtimer_event == FUSBH200_HRTIMER_IAA_WATCHDOG)
+ ++fusbh200->next_hrtimer_event;
+
+ /* guard against (alleged) silicon errata */
+ if (cmd & CMD_IAAD)
+ fusbh200_dbg(fusbh200, "IAA with IAAD still set?\n");
+ if (fusbh200->async_iaa) {
+ COUNT(fusbh200->stats.iaa);
+ end_unlink_async(fusbh200);
+ } else
+ fusbh200_dbg(fusbh200, "IAA with nothing unlinked?\n");
+ }
+
+ /* remote wakeup [4.3.1] */
+ if (status & STS_PCD) {
+ int pstatus;
+ u32 __iomem *status_reg = &fusbh200->regs->port_status;
+
+ /* kick root hub later */
+ pcd_status = status;
+
+ /* resume root hub? */
+ if (fusbh200->rh_state == FUSBH200_RH_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ pstatus = fusbh200_readl(fusbh200, status_reg);
+
+ if (test_bit(0, &fusbh200->suspended_ports) &&
+ ((pstatus & PORT_RESUME) ||
+ !(pstatus & PORT_SUSPEND)) &&
+ (pstatus & PORT_PE) &&
+ fusbh200->reset_done[0] == 0) {
+
+ /* start 20 msec resume signaling from this port,
+ * and make khubd collect PORT_STAT_C_SUSPEND to
+ * stop that signaling. Use 5 ms extra for safety,
+ * like usb_port_resume() does.
+ */
+ fusbh200->reset_done[0] = jiffies + msecs_to_jiffies(25);
+ set_bit(0, &fusbh200->resuming_ports);
+ fusbh200_dbg (fusbh200, "port 1 remote wakeup\n");
+ mod_timer(&hcd->rh_timer, fusbh200->reset_done[0]);
+ }
+ }
+
+ /* PCI errors [4.15.2.4] */
+ if (unlikely ((status & STS_FATAL) != 0)) {
+ fusbh200_err(fusbh200, "fatal error\n");
+ dbg_cmd(fusbh200, "fatal", cmd);
+ dbg_status(fusbh200, "fatal", status);
+dead:
+ usb_hc_died(hcd);
+
+ /* Don't let the controller do anything more */
+ fusbh200->shutdown = true;
+ fusbh200->rh_state = FUSBH200_RH_STOPPING;
+ fusbh200->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
+ fusbh200_writel(fusbh200, fusbh200->command, &fusbh200->regs->command);
+ fusbh200_writel(fusbh200, 0, &fusbh200->regs->intr_enable);
+ fusbh200_handle_controller_death(fusbh200);
+
+ /* Handle completions when the controller stops */
+ bh = 0;
+ }
+
+ if (bh)
+ fusbh200_work (fusbh200);
+ spin_unlock (&fusbh200->lock);
+ if (pcd_status)
+ usb_hcd_poll_rh_status(hcd);
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE: control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int fusbh200_urb_enqueue (
+ struct usb_hcd *hcd,
+ struct urb *urb,
+ gfp_t mem_flags
+) {
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ struct list_head qtd_list;
+
+ INIT_LIST_HEAD (&qtd_list);
+
+ switch (usb_pipetype (urb->pipe)) {
+ case PIPE_CONTROL:
+ /* qh_completions() code doesn't handle all the fault cases
+ * in multi-TD control transfers. Even 1KB is rare anyway.
+ */
+ if (urb->transfer_buffer_length > (16 * 1024))
+ return -EMSGSIZE;
+ /* FALLTHROUGH */
+ /* case PIPE_BULK: */
+ default:
+ if (!qh_urb_transaction (fusbh200, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ return submit_async(fusbh200, urb, &qtd_list, mem_flags);
+
+ case PIPE_INTERRUPT:
+ if (!qh_urb_transaction (fusbh200, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ return intr_submit(fusbh200, urb, &qtd_list, mem_flags);
+
+ case PIPE_ISOCHRONOUS:
+ return itd_submit (fusbh200, urb, mem_flags);
+ }
+}
+
+/* remove from hardware lists
+ * completions normally happen asynchronously
+ */
+
+static int fusbh200_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ struct fusbh200_qh *qh;
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
+ switch (usb_pipetype (urb->pipe)) {
+ // case PIPE_CONTROL:
+ // case PIPE_BULK:
+ default:
+ qh = (struct fusbh200_qh *) urb->hcpriv;
+ if (!qh)
+ break;
+ switch (qh->qh_state) {
+ case QH_STATE_LINKED:
+ case QH_STATE_COMPLETING:
+ start_unlink_async(fusbh200, qh);
+ break;
+ case QH_STATE_UNLINK:
+ case QH_STATE_UNLINK_WAIT:
+ /* already started */
+ break;
+ case QH_STATE_IDLE:
+ /* QH might be waiting for a Clear-TT-Buffer */
+ qh_completions(fusbh200, qh);
+ break;
+ }
+ break;
+
+ case PIPE_INTERRUPT:
+ qh = (struct fusbh200_qh *) urb->hcpriv;
+ if (!qh)
+ break;
+ switch (qh->qh_state) {
+ case QH_STATE_LINKED:
+ case QH_STATE_COMPLETING:
+ start_unlink_intr(fusbh200, qh);
+ break;
+ case QH_STATE_IDLE:
+ qh_completions (fusbh200, qh);
+ break;
+ default:
+ fusbh200_dbg (fusbh200, "bogus qh %p state %d\n",
+ qh, qh->qh_state);
+ goto done;
+ }
+ break;
+
+ case PIPE_ISOCHRONOUS:
+ // itd...
+
+ // wait till next completion, do it then.
+ // completion irqs can wait up to 1024 msec,
+ break;
+ }
+done:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// bulk qh holds the data toggle
+
+static void
+fusbh200_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ unsigned long flags;
+ struct fusbh200_qh *qh, *tmp;
+
+ /* ASSERT: any requests/urbs are being unlinked */
+ /* ASSERT: nobody can be submitting urbs for this any more */
+
+rescan:
+ spin_lock_irqsave (&fusbh200->lock, flags);
+ qh = ep->hcpriv;
+ if (!qh)
+ goto done;
+
+ /* endpoints can be iso streams. for now, we don't
+ * accelerate iso completions ... so spin a while.
+ */
+ if (qh->hw == NULL) {
+ struct fusbh200_iso_stream *stream = ep->hcpriv;
+
+ if (!list_empty(&stream->td_list))
+ goto idle_timeout;
+
+ /* BUG_ON(!list_empty(&stream->free_list)); */
+ kfree(stream);
+ goto done;
+ }
+
+ if (fusbh200->rh_state < FUSBH200_RH_RUNNING)
+ qh->qh_state = QH_STATE_IDLE;
+ switch (qh->qh_state) {
+ case QH_STATE_LINKED:
+ case QH_STATE_COMPLETING:
+ for (tmp = fusbh200->async->qh_next.qh;
+ tmp && tmp != qh;
+ tmp = tmp->qh_next.qh)
+ continue;
+ /* periodic qh self-unlinks on empty, and a COMPLETING qh
+ * may already be unlinked.
+ */
+ if (tmp)
+ start_unlink_async(fusbh200, qh);
+ /* FALL THROUGH */
+ case QH_STATE_UNLINK: /* wait for hw to finish? */
+ case QH_STATE_UNLINK_WAIT:
+idle_timeout:
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+ schedule_timeout_uninterruptible(1);
+ goto rescan;
+ case QH_STATE_IDLE: /* fully unlinked */
+ if (qh->clearing_tt)
+ goto idle_timeout;
+ if (list_empty (&qh->qtd_list)) {
+ qh_destroy(fusbh200, qh);
+ break;
+ }
+ /* else FALL THROUGH */
+ default:
+ /* caller was supposed to have unlinked any requests;
+ * that's not our job. just leak this memory.
+ */
+ fusbh200_err (fusbh200, "qh %p (#%02x) state %d%s\n",
+ qh, ep->desc.bEndpointAddress, qh->qh_state,
+ list_empty (&qh->qtd_list) ? "" : "(has tds)");
+ break;
+ }
+ done:
+ ep->hcpriv = NULL;
+ spin_unlock_irqrestore (&fusbh200->lock, flags);
+}
+
+static void
+fusbh200_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200(hcd);
+ struct fusbh200_qh *qh;
+ int eptype = usb_endpoint_type(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ unsigned long flags;
+
+ if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+ return;
+
+ spin_lock_irqsave(&fusbh200->lock, flags);
+ qh = ep->hcpriv;
+
+ /* For Bulk and Interrupt endpoints we maintain the toggle state
+ * in the hardware; the toggle bits in udev aren't used at all.
+ * When an endpoint is reset by usb_clear_halt() we must reset
+ * the toggle bit in the QH.
+ */
+ if (qh) {
+ usb_settoggle(qh->dev, epnum, is_out, 0);
+ if (!list_empty(&qh->qtd_list)) {
+ WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+ } else if (qh->qh_state == QH_STATE_LINKED ||
+ qh->qh_state == QH_STATE_COMPLETING) {
+
+ /* The toggle value in the QH can't be updated
+ * while the QH is active. Unlink it now;
+ * re-linking will call qh_refresh().
+ */
+ if (eptype == USB_ENDPOINT_XFER_BULK)
+ start_unlink_async(fusbh200, qh);
+ else
+ start_unlink_intr(fusbh200, qh);
+ }
+ }
+ spin_unlock_irqrestore(&fusbh200->lock, flags);
+}
+
+static int fusbh200_get_frame (struct usb_hcd *hcd)
+{
+ struct fusbh200_hcd *fusbh200 = hcd_to_fusbh200 (hcd);
+ return (fusbh200_read_frame_index(fusbh200) >> 3) % fusbh200->periodic_size;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The EHCI in ChipIdea HDRC cannot be a separate module or device,
+ * because its registers (and irq) are shared between host/gadget/otg
+ * functions and in order to facilitate role switching we cannot
+ * give the fusbh200 driver exclusive access to those.
+ */
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_LICENSE ("GPL");
+
+static const struct hc_driver fusbh200_fusbh200_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Faraday USB2.0 Host Controller",
+ .hcd_priv_size = sizeof(struct fusbh200_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = fusbh200_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = hcd_fusbh200_init,
+ .start = fusbh200_run,
+ .stop = fusbh200_stop,
+ .shutdown = fusbh200_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = fusbh200_urb_enqueue,
+ .urb_dequeue = fusbh200_urb_dequeue,
+ .endpoint_disable = fusbh200_endpoint_disable,
+ .endpoint_reset = fusbh200_endpoint_reset,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = fusbh200_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = fusbh200_hub_status_data,
+ .hub_control = fusbh200_hub_control,
+ .bus_suspend = fusbh200_bus_suspend,
+ .bus_resume = fusbh200_bus_resume,
+
+ .relinquish_port = fusbh200_relinquish_port,
+ .port_handed_over = fusbh200_port_handed_over,
+
+ .clear_tt_buffer_complete = fusbh200_clear_tt_buffer_complete,
+};
+
+static void fusbh200_init(struct fusbh200_hcd *fusbh200)
+{
+ u32 reg;
+
+ reg = fusbh200_readl(fusbh200, &fusbh200->regs->bmcsr);
+ reg |= BMCSR_INT_POLARITY;
+ reg &= ~BMCSR_VBUS_OFF;
+ fusbh200_writel(fusbh200, reg, &fusbh200->regs->bmcsr);
+
+ reg = fusbh200_readl(fusbh200, &fusbh200->regs->bmier);
+ fusbh200_writel(fusbh200, reg | BMIER_OVC_EN | BMIER_VBUS_ERR_EN,
+ &fusbh200->regs->bmier);
+}
+
+/**
+ * fusbh200_hcd_probe - initialize faraday FUSBH200 HCDs
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int fusbh200_hcd_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd;
+ struct resource *res;
+ int irq;
+ int retval = -ENODEV;
+ struct fusbh200_hcd *fusbh200;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ pdev->dev.power.power_state = PMSG_ON;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev,
+ "Found HC with no IRQ. Check %s setup!\n",
+ dev_name(dev));
+ return -ENODEV;
+ }
+
+ irq = res->start;
+
+ hcd = usb_create_hcd(&fusbh200_fusbh200_hc_driver, dev,
+ dev_name(dev));
+ if (!hcd) {
+ dev_err(dev, "failed to create hcd with err %d\n", retval);
+ retval = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev,
+ "Found HC with no register addr. Check %s setup!\n",
+ dev_name(dev));
+ retval = -ENODEV;
+ goto fail_request_resource;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->has_tt = 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ fusbh200_fusbh200_hc_driver.description)) {
+ dev_dbg(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto fail_request_resource;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!res) {
+ dev_err(dev,
+ "Found HC with no register addr. Check %s setup!\n",
+ dev_name(dev));
+ retval = -ENODEV;
+ goto fail_request_resource;
+ }
+
+ hcd->regs = ioremap_nocache(res->start, resource_size(res));
+ if (hcd->regs == NULL) {
+ dev_dbg(dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto fail_ioremap;
+ }
+
+ fusbh200 = hcd_to_fusbh200(hcd);
+
+ fusbh200->caps = hcd->regs;
+
+ retval = fusbh200_setup(hcd);
+ if (retval)
+ goto fail_add_hcd;
+
+ fusbh200_init(fusbh200);
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval) {
+ dev_err(dev, "failed to add hcd with err %d\n", retval);
+ goto fail_add_hcd;
+ }
+
+ return retval;
+
+fail_add_hcd:
+ iounmap(hcd->regs);
+fail_ioremap:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval);
+ return retval;
+}
+
+/**
+ * fusbh200_hcd_remove - shutdown processing for EHCI HCDs
+ * @dev: USB Host Controller being removed
+ *
+ * Reverses the effect of fotg2xx_usb_hcd_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int fusbh200_hcd_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ if (!hcd)
+ return 0;
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+static struct platform_driver fusbh200_hcd_fusbh200_driver = {
+ .driver = {
+ .name = "fusbh200",
+ },
+ .probe = fusbh200_hcd_probe,
+ .remove = fusbh200_hcd_remove,
+};
+
+static int __init fusbh200_hcd_init(void)
+{
+ int retval = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
+ set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+ if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
+ test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
+ printk(KERN_WARNING "Warning! fusbh200_hcd should always be loaded"
+ " before uhci_hcd and ohci_hcd, not after\n");
+
+ pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd\n",
+ hcd_name,
+ sizeof(struct fusbh200_qh), sizeof(struct fusbh200_qtd),
+ sizeof(struct fusbh200_itd));
+
+#ifdef DEBUG
+ fusbh200_debug_root = debugfs_create_dir("fusbh200", usb_debug_root);
+ if (!fusbh200_debug_root) {
+ retval = -ENOENT;
+ goto err_debug;
+ }
+#endif
+
+ retval = platform_driver_register(&fusbh200_hcd_fusbh200_driver);
+ if (retval < 0)
+ goto clean;
+ return retval;
+
+ platform_driver_unregister(&fusbh200_hcd_fusbh200_driver);
+clean:
+#ifdef DEBUG
+ debugfs_remove(fusbh200_debug_root);
+ fusbh200_debug_root = NULL;
+err_debug:
+#endif
+ clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+ return retval;
+}
+module_init(fusbh200_hcd_init);
+
+static void __exit fusbh200_hcd_cleanup(void)
+{
+ platform_driver_unregister(&fusbh200_hcd_fusbh200_driver);
+#ifdef DEBUG
+ debugfs_remove(fusbh200_debug_root);
+#endif
+ clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(fusbh200_hcd_cleanup);
diff --git a/drivers/usb/host/fusbh200.h b/drivers/usb/host/fusbh200.h
new file mode 100644
index 00000000000..797c9e85527
--- /dev/null
+++ b/drivers/usb/host/fusbh200.h
@@ -0,0 +1,743 @@
+#ifndef __LINUX_FUSBH200_H
+#define __LINUX_FUSBH200_H
+
+/* definitions used for the EHCI driver */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given FUSBH200_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#define __hc32 __le32
+#define __hc16 __le16
+
+/* statistics can be kept for tuning/monitoring */
+struct fusbh200_stats {
+ /* irq usage */
+ unsigned long normal;
+ unsigned long error;
+ unsigned long iaa;
+ unsigned long lost_iaa;
+
+ /* termination of urbs from core */
+ unsigned long complete;
+ unsigned long unlink;
+};
+
+/* fusbh200_hcd->lock guards shared data against other CPUs:
+ * fusbh200_hcd: async, unlink, periodic (and shadow), ...
+ * usb_host_endpoint: hcpriv
+ * fusbh200_qh: qh_next, qtd_list
+ * fusbh200_qtd: qtd_list
+ *
+ * Also, hold this lock when talking to HC registers or
+ * when updating hw_* fields in shared qh/qtd/... structures.
+ */
+
+#define FUSBH200_MAX_ROOT_PORTS 1 /* see HCS_N_PORTS */
+
+/*
+ * fusbh200_rh_state values of FUSBH200_RH_RUNNING or above mean that the
+ * controller may be doing DMA. Lower values mean there's no DMA.
+ */
+enum fusbh200_rh_state {
+ FUSBH200_RH_HALTED,
+ FUSBH200_RH_SUSPENDED,
+ FUSBH200_RH_RUNNING,
+ FUSBH200_RH_STOPPING
+};
+
+/*
+ * Timer events, ordered by increasing delay length.
+ * Always update event_delays_ns[] and event_handlers[] (defined in
+ * ehci-timer.c) in parallel with this list.
+ */
+enum fusbh200_hrtimer_event {
+ FUSBH200_HRTIMER_POLL_ASS, /* Poll for async schedule off */
+ FUSBH200_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
+ FUSBH200_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
+ FUSBH200_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
+ FUSBH200_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
+ FUSBH200_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
+ FUSBH200_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
+ FUSBH200_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
+ FUSBH200_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
+ FUSBH200_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
+ FUSBH200_HRTIMER_NUM_EVENTS /* Must come last */
+};
+#define FUSBH200_HRTIMER_NO_EVENT 99
+
+struct fusbh200_hcd { /* one per controller */
+ /* timing support */
+ enum fusbh200_hrtimer_event next_hrtimer_event;
+ unsigned enabled_hrtimer_events;
+ ktime_t hr_timeouts[FUSBH200_HRTIMER_NUM_EVENTS];
+ struct hrtimer hrtimer;
+
+ int PSS_poll_count;
+ int ASS_poll_count;
+ int died_poll_count;
+
+ /* glue to PCI and HCD framework */
+ struct fusbh200_caps __iomem *caps;
+ struct fusbh200_regs __iomem *regs;
+ struct fusbh200_dbg_port __iomem *debug;
+
+ __u32 hcs_params; /* cached register copy */
+ spinlock_t lock;
+ enum fusbh200_rh_state rh_state;
+
+ /* general schedule support */
+ bool scanning:1;
+ bool need_rescan:1;
+ bool intr_unlinking:1;
+ bool async_unlinking:1;
+ bool shutdown:1;
+ struct fusbh200_qh *qh_scan_next;
+
+ /* async schedule support */
+ struct fusbh200_qh *async;
+ struct fusbh200_qh *dummy; /* For AMD quirk use */
+ struct fusbh200_qh *async_unlink;
+ struct fusbh200_qh *async_unlink_last;
+ struct fusbh200_qh *async_iaa;
+ unsigned async_unlink_cycle;
+ unsigned async_count; /* async activity count */
+
+ /* periodic schedule support */
+#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
+ unsigned periodic_size;
+ __hc32 *periodic; /* hw periodic table */
+ dma_addr_t periodic_dma;
+ struct list_head intr_qh_list;
+ unsigned i_thresh; /* uframes HC might cache */
+
+ union fusbh200_shadow *pshadow; /* mirror hw periodic table */
+ struct fusbh200_qh *intr_unlink;
+ struct fusbh200_qh *intr_unlink_last;
+ unsigned intr_unlink_cycle;
+ unsigned now_frame; /* frame from HC hardware */
+ unsigned next_frame; /* scan periodic, start here */
+ unsigned intr_count; /* intr activity count */
+ unsigned isoc_count; /* isoc activity count */
+ unsigned periodic_count; /* periodic activity count */
+ unsigned uframe_periodic_max; /* max periodic time per uframe */
+
+
+ /* list of itds completed while now_frame was still active */
+ struct list_head cached_itd_list;
+ struct fusbh200_itd *last_itd_to_free;
+
+ /* per root hub port */
+ unsigned long reset_done [FUSBH200_MAX_ROOT_PORTS];
+
+ /* bit vectors (one bit per port) */
+ unsigned long bus_suspended; /* which ports were
+ already suspended at the start of a bus suspend */
+ unsigned long companion_ports; /* which ports are
+ dedicated to the companion controller */
+ unsigned long owned_ports; /* which ports are
+ owned by the companion during a bus suspend */
+ unsigned long port_c_suspend; /* which ports have
+ the change-suspend feature turned on */
+ unsigned long suspended_ports; /* which ports are
+ suspended */
+ unsigned long resuming_ports; /* which ports have
+ started to resume */
+
+ /* per-HC memory pools (could be per-bus, but ...) */
+ struct dma_pool *qh_pool; /* qh per active urb */
+ struct dma_pool *qtd_pool; /* one or more per qh */
+ struct dma_pool *itd_pool; /* itd per iso urb */
+
+ unsigned random_frame;
+ unsigned long next_statechange;
+ ktime_t last_periodic_enable;
+ u32 command;
+
+ /* SILICON QUIRKS */
+ unsigned need_io_watchdog:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
+
+ u8 sbrn; /* packed release number */
+
+ /* irq statistics */
+#ifdef FUSBH200_STATS
+ struct fusbh200_stats stats;
+# define COUNT(x) do { (x)++; } while (0)
+#else
+# define COUNT(x) do {} while (0)
+#endif
+
+ /* debug files */
+#ifdef DEBUG
+ struct dentry *debug_dir;
+#endif
+};
+
+/* convert between an HCD pointer and the corresponding FUSBH200_HCD */
+static inline struct fusbh200_hcd *hcd_to_fusbh200 (struct usb_hcd *hcd)
+{
+ return (struct fusbh200_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *fusbh200_to_hcd (struct fusbh200_hcd *fusbh200)
+{
+ return container_of ((void *) fusbh200, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct fusbh200_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ * some hosts treat caplength and hciversion as parts of a 32-bit
+ * register, others treat them as two separate registers, this
+ * affects the memory map for big endian controllers.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(fusbh200, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
+ (fusbh200_big_endian_capbase(fusbh200) ? 24 : 0)))
+#define HC_VERSION(fusbh200, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
+ (fusbh200_big_endian_capbase(fusbh200) ? 0 : 16)))
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+ u8 portroute[8]; /* nibbles for routing - offset 0xC */
+};
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct fusbh200_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+
+/* EHCI 1.1 addendum */
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved1;
+ /* PORTSC: offset 0x20 */
+ u32 port_status;
+/* 31:23 reserved */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC)
+
+ u32 reserved2[3];
+
+ /* BMCSR: offset 0x30 */
+ u32 bmcsr; /* Bus Moniter Control/Status Register */
+#define BMCSR_HOST_SPD_TYP (3<<9)
+#define BMCSR_VBUS_OFF (1<<4)
+#define BMCSR_INT_POLARITY (1<<3)
+
+ /* BMISR: offset 0x34 */
+ u32 bmisr; /* Bus Moniter Interrupt Status Register*/
+#define BMISR_OVC (1<<1)
+
+ /* BMIER: offset 0x38 */
+ u32 bmier; /* Bus Moniter Interrupt Enable Register */
+#define BMIER_OVC_EN (1<<1)
+#define BMIER_VBUS_ERR_EN (1<<0)
+};
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct fusbh200_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+};
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+#include <linux/init.h>
+extern int __init early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif /* CONFIG_EARLY_PRINTK_DBGP */
+
+struct usb_hcd;
+
+static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
+{
+ return 1; /* Shouldn't this be 0? */
+}
+
+static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return -1;
+}
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+/* Call backs from fusbh200 host driver to fusbh200 debug driver */
+extern int dbgp_external_startup(struct usb_hcd *);
+extern int dbgp_reset_prep(struct usb_hcd *hcd);
+#else
+static inline int dbgp_reset_prep(struct usb_hcd *hcd)
+{
+ return xen_dbgp_reset_prep(hcd);
+}
+static inline int dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return xen_dbgp_external_startup(hcd);
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define QTD_NEXT(fusbh200, dma) cpu_to_hc32(fusbh200, (u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct fusbh200_qtd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next; /* see EHCI 3.5.1 */
+ __hc32 hw_alt_next; /* see EHCI 3.5.2 */
+ __hc32 hw_token; /* see EHCI 3.5.3 */
+#define QTD_TOGGLE (1 << 31) /* data toggle */
+#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
+#define QTD_IOC (1 << 15) /* interrupt on complete */
+#define QTD_CERR(tok) (((tok)>>10) & 0x3)
+#define QTD_PID(tok) (((tok)>>8) & 0x3)
+#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
+#define QTD_STS_HALT (1 << 6) /* halted on error */
+#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
+#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
+#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
+#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
+#define QTD_STS_STS (1 << 1) /* split transaction state */
+#define QTD_STS_PING (1 << 0) /* issue PING? */
+
+#define ACTIVE_BIT(fusbh200) cpu_to_hc32(fusbh200, QTD_STS_ACTIVE)
+#define HALT_BIT(fusbh200) cpu_to_hc32(fusbh200, QTD_STS_HALT)
+#define STATUS_BIT(fusbh200) cpu_to_hc32(fusbh200, QTD_STS_STS)
+
+ __hc32 hw_buf [5]; /* see EHCI 3.5.4 */
+ __hc32 hw_buf_hi [5]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t qtd_dma; /* qtd address */
+ struct list_head qtd_list; /* sw qtd list */
+ struct urb *urb; /* qtd's urb */
+ size_t length; /* length of buffer */
+} __attribute__ ((aligned (32)));
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK(fusbh200) cpu_to_hc32 (fusbh200, ~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
+
+/*-------------------------------------------------------------------------*/
+
+/* type tag from {qh,itd,fstn}->hw_next */
+#define Q_NEXT_TYPE(fusbh200,dma) ((dma) & cpu_to_hc32(fusbh200, 3 << 1))
+
+/*
+ * Now the following defines are not converted using the
+ * cpu_to_le32() macro anymore, since we have to support
+ * "dynamic" switching between be and le support, so that the driver
+ * can be used on one system with SoC EHCI controller using big-endian
+ * descriptors as well as a normal little-endian PCI EHCI controller.
+ */
+/* values for that type tag */
+#define Q_TYPE_ITD (0 << 1)
+#define Q_TYPE_QH (1 << 1)
+#define Q_TYPE_SITD (2 << 1)
+#define Q_TYPE_FSTN (3 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define QH_NEXT(fusbh200,dma) (cpu_to_hc32(fusbh200, (((u32)dma)&~0x01f)|Q_TYPE_QH))
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define FUSBH200_LIST_END(fusbh200) cpu_to_hc32(fusbh200, 1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure. That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule. Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union fusbh200_shadow {
+ struct fusbh200_qh *qh; /* Q_TYPE_QH */
+ struct fusbh200_itd *itd; /* Q_TYPE_ITD */
+ struct fusbh200_fstn *fstn; /* Q_TYPE_FSTN */
+ __hc32 *hw_next; /* (all types) */
+ void *ptr;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+/* first part defined by EHCI spec */
+struct fusbh200_qh_hw {
+ __hc32 hw_next; /* see EHCI 3.6.1 */
+ __hc32 hw_info1; /* see EHCI 3.6.2 */
+#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
+#define QH_HEAD (1 << 15) /* Head of async reclamation list */
+#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
+#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
+#define QH_LOW_SPEED (1 << 12)
+#define QH_FULL_SPEED (0 << 12)
+#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
+ __hc32 hw_info2; /* see EHCI 3.6.2 */
+#define QH_SMASK 0x000000ff
+#define QH_CMASK 0x0000ff00
+#define QH_HUBADDR 0x007f0000
+#define QH_HUBPORT 0x3f800000
+#define QH_MULT 0xc0000000
+ __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
+
+ /* qtd overlay (hardware parts of a struct fusbh200_qtd) */
+ __hc32 hw_qtd_next;
+ __hc32 hw_alt_next;
+ __hc32 hw_token;
+ __hc32 hw_buf [5];
+ __hc32 hw_buf_hi [5];
+} __attribute__ ((aligned(32)));
+
+struct fusbh200_qh {
+ struct fusbh200_qh_hw *hw; /* Must come first */
+ /* the rest is HCD-private */
+ dma_addr_t qh_dma; /* address of qh */
+ union fusbh200_shadow qh_next; /* ptr to qh; or periodic */
+ struct list_head qtd_list; /* sw qtd list */
+ struct list_head intr_node; /* list of intr QHs */
+ struct fusbh200_qtd *dummy;
+ struct fusbh200_qh *unlink_next; /* next on unlink list */
+
+ unsigned unlink_cycle;
+
+ u8 needs_rescan; /* Dequeue during giveback */
+ u8 qh_state;
+#define QH_STATE_LINKED 1 /* HC sees this */
+#define QH_STATE_UNLINK 2 /* HC may still see this */
+#define QH_STATE_IDLE 3 /* HC doesn't see this */
+#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
+#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
+
+ u8 xacterrs; /* XactErr retry counter */
+#define QH_XACTERR_MAX 32 /* XactErr retry limit */
+
+ /* periodic schedule info */
+ u8 usecs; /* intr bandwidth */
+ u8 gap_uf; /* uframes split/csplit gap */
+ u8 c_usecs; /* ... split completion bw */
+ u16 tt_usecs; /* tt downstream bandwidth */
+ unsigned short period; /* polling interval */
+ unsigned short start; /* where polling starts */
+#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
+ struct usb_device *dev; /* access to TT */
+ unsigned is_out:1; /* bulk or intr OUT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* description of one iso transaction (up to 3 KB data if highspeed) */
+struct fusbh200_iso_packet {
+ /* These will be copied to iTD when scheduling */
+ u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
+ __hc32 transaction; /* itd->hw_transaction[i] |= */
+ u8 cross; /* buf crosses pages */
+ /* for full speed OUT splits */
+ u32 buf1;
+};
+
+/* temporary schedule data for packets from iso urbs (both speeds)
+ * each packet is one logical usb transaction to the device (not TT),
+ * beginning at stream->next_uframe
+ */
+struct fusbh200_iso_sched {
+ struct list_head td_list;
+ unsigned span;
+ struct fusbh200_iso_packet packet [0];
+};
+
+/*
+ * fusbh200_iso_stream - groups all (s)itds for this endpoint.
+ * acts like a qh would, if EHCI had them for ISO.
+ */
+struct fusbh200_iso_stream {
+ /* first field matches fusbh200_hq, but is NULL */
+ struct fusbh200_qh_hw *hw;
+
+ u8 bEndpointAddress;
+ u8 highspeed;
+ struct list_head td_list; /* queued itds */
+ struct list_head free_list; /* list of unused itds */
+ struct usb_device *udev;
+ struct usb_host_endpoint *ep;
+
+ /* output of (re)scheduling */
+ int next_uframe;
+ __hc32 splits;
+
+ /* the rest is derived from the endpoint descriptor,
+ * trusting urb->interval == f(epdesc->bInterval) and
+ * including the extra info for hw_bufp[0..2]
+ */
+ u8 usecs, c_usecs;
+ u16 interval;
+ u16 tt_usecs;
+ u16 maxp;
+ u16 raw_mask;
+ unsigned bandwidth;
+
+ /* This is used to initialize iTD's hw_bufp fields */
+ __hc32 buf0;
+ __hc32 buf1;
+ __hc32 buf2;
+
+ /* this is used to initialize sITD's tt info */
+ __hc32 address;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.3
+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
+ *
+ * Schedule records for high speed iso xfers
+ */
+struct fusbh200_itd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next; /* see EHCI 3.3.1 */
+ __hc32 hw_transaction [8]; /* see EHCI 3.3.2 */
+#define FUSBH200_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
+#define FUSBH200_ISOC_BUF_ERR (1<<30) /* Data buffer error */
+#define FUSBH200_ISOC_BABBLE (1<<29) /* babble detected */
+#define FUSBH200_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
+#define FUSBH200_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
+#define FUSBH200_ITD_IOC (1 << 15) /* interrupt on complete */
+
+#define ITD_ACTIVE(fusbh200) cpu_to_hc32(fusbh200, FUSBH200_ISOC_ACTIVE)
+
+ __hc32 hw_bufp [7]; /* see EHCI 3.3.3 */
+ __hc32 hw_bufp_hi [7]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t itd_dma; /* for this itd */
+ union fusbh200_shadow itd_next; /* ptr to periodic q entry */
+
+ struct urb *urb;
+ struct fusbh200_iso_stream *stream; /* endpoint's queue */
+ struct list_head itd_list; /* list of stream's itds */
+
+ /* any/all hw_transactions here may be used by that urb */
+ unsigned frame; /* where scheduled */
+ unsigned pg;
+ unsigned index[8]; /* in urb->iso_frame_desc */
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.96 Section 3.7
+ * Periodic Frame Span Traversal Node (FSTN)
+ *
+ * Manages split interrupt transactions (using TT) that span frame boundaries
+ * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
+ */
+struct fusbh200_fstn {
+ __hc32 hw_next; /* any periodic q entry */
+ __hc32 hw_prev; /* qh or FUSBH200_LIST_END */
+
+ /* the rest is HCD-private */
+ dma_addr_t fstn_dma;
+ union fusbh200_shadow fstn_next; /* ptr to periodic q entry */
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define fusbh200_prepare_ports_for_controller_suspend(fusbh200, do_wakeup) \
+ fusbh200_adjust_port_wakeup_flags(fusbh200, true, do_wakeup);
+
+#define fusbh200_prepare_ports_for_controller_resume(fusbh200) \
+ fusbh200_adjust_port_wakeup_flags(fusbh200, false, false);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Some EHCI controllers have a Transaction Translator built into the
+ * root hub. This is a non-standard feature. Each controller will need
+ * to add code to the following inline functions, and call them as
+ * needed (mostly in root hub code).
+ */
+
+static inline unsigned int
+fusbh200_get_speed(struct fusbh200_hcd *fusbh200, unsigned int portsc)
+{
+ return (readl(&fusbh200->regs->bmcsr)
+ & BMCSR_HOST_SPD_TYP) >> 9;
+}
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int
+fusbh200_port_speed(struct fusbh200_hcd *fusbh200, unsigned int portsc)
+{
+ switch (fusbh200_get_speed(fusbh200, portsc)) {
+ case 0:
+ return 0;
+ case 1:
+ return USB_PORT_STAT_LOW_SPEED;
+ case 2:
+ default:
+ return USB_PORT_STAT_HIGH_SPEED;
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define fusbh200_has_fsl_portno_bug(e) (0)
+
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ */
+
+#define fusbh200_big_endian_mmio(e) 0
+#define fusbh200_big_endian_capbase(e) 0
+
+static inline unsigned int fusbh200_readl(const struct fusbh200_hcd *fusbh200,
+ __u32 __iomem * regs)
+{
+ return readl(regs);
+}
+
+static inline void fusbh200_writel(const struct fusbh200_hcd *fusbh200,
+ const unsigned int val, __u32 __iomem *regs)
+{
+ writel(val, regs);
+}
+
+/* cpu to fusbh200 */
+static inline __hc32 cpu_to_hc32 (const struct fusbh200_hcd *fusbh200, const u32 x)
+{
+ return cpu_to_le32(x);
+}
+
+/* fusbh200 to cpu */
+static inline u32 hc32_to_cpu (const struct fusbh200_hcd *fusbh200, const __hc32 x)
+{
+ return le32_to_cpu(x);
+}
+
+static inline u32 hc32_to_cpup (const struct fusbh200_hcd *fusbh200, const __hc32 *x)
+{
+ return le32_to_cpup(x);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline unsigned fusbh200_read_frame_index(struct fusbh200_hcd *fusbh200)
+{
+ return fusbh200_readl(fusbh200, &fusbh200->regs->frame_index);
+}
+
+#define fusbh200_itdlen(urb, desc, t) ({ \
+ usb_pipein((urb)->pipe) ? \
+ (desc)->length - FUSBH200_ITD_LENGTH(t) : \
+ FUSBH200_ITD_LENGTH(t); \
+})
+/*-------------------------------------------------------------------------*/
+
+#ifndef DEBUG
+#define STUB_DEBUG_FILES
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*/
+
+#endif /* __LINUX_FUSBH200_H */
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 104730dabd2..483990c716a 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -577,7 +577,7 @@ static struct hc_driver hwahc_hc_driver = {
.product_desc = "Wireless USB HWA host controller",
.hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd),
.irq = NULL, /* FIXME */
- .flags = HCD_USB2, /* FIXME */
+ .flags = HCD_USB25,
.reset = hwahc_op_reset,
.start = hwahc_op_start,
.stop = hwahc_op_stop,
@@ -588,8 +588,6 @@ static struct hc_driver hwahc_hc_driver = {
.hub_status_data = wusbhc_rh_status_data,
.hub_control = wusbhc_rh_control,
- .bus_suspend = wusbhc_rh_suspend,
- .bus_resume = wusbhc_rh_resume,
.start_port_reset = wusbhc_rh_start_port_reset,
};
@@ -685,12 +683,9 @@ static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface)
wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
wa->usb_iface = usb_get_intf(iface);
wusbhc->dev = dev;
- wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent);
- if (wusbhc->uwb_rc == NULL) {
- result = -ENODEV;
- dev_err(dev, "Cannot get associated UWB Host Controller\n");
- goto error_rc_get;
- }
+ /* defer getting the uwb_rc handle until it is needed since it
+ * may not have been registered by the hwa_rc driver yet. */
+ wusbhc->uwb_rc = NULL;
result = wa_fill_descr(wa); /* Get the device descriptor */
if (result < 0)
goto error_fill_descriptor;
@@ -733,8 +728,6 @@ error_wusbhc_create:
/* WA Descr fill allocs no resources */
error_security_create:
error_fill_descriptor:
- uwb_rc_put(wusbhc->uwb_rc);
-error_rc_get:
usb_put_intf(iface);
usb_put_dev(usb_dev);
return result;
@@ -776,6 +769,7 @@ static int hwahc_probe(struct usb_interface *usb_iface,
goto error_alloc;
}
usb_hcd->wireless = 1;
+ usb_hcd->self.sg_tablesize = ~0;
wusbhc = usb_hcd_to_wusbhc(usb_hcd);
hwahc = container_of(wusbhc, struct hwahc, wusbhc);
hwahc_init(hwahc);
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index f0ebe8e7c58..03dc4d9cbec 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -809,26 +809,36 @@ static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd,
/* calculate frame */
cur_frame = imx21_hc_get_frame(hcd);
- if (urb->transfer_flags & URB_ISO_ASAP) {
- if (list_empty(&ep_priv->td_list))
- urb->start_frame = cur_frame + 5;
- else
- urb->start_frame = list_entry(
- ep_priv->td_list.prev,
- struct td, list)->frame + urb->interval;
- }
- urb->start_frame = wrap_frame(urb->start_frame);
- if (frame_after(cur_frame, urb->start_frame)) {
- dev_dbg(imx21->dev,
- "enqueue: adjusting iso start %d (cur=%d) asap=%d\n",
- urb->start_frame, cur_frame,
- (urb->transfer_flags & URB_ISO_ASAP) != 0);
- urb->start_frame = wrap_frame(cur_frame + 1);
+ i = 0;
+ if (list_empty(&ep_priv->td_list)) {
+ urb->start_frame = wrap_frame(cur_frame + 5);
+ } else {
+ urb->start_frame = wrap_frame(list_entry(ep_priv->td_list.prev,
+ struct td, list)->frame + urb->interval);
+
+ if (frame_after(cur_frame, urb->start_frame)) {
+ dev_dbg(imx21->dev,
+ "enqueue: adjusting iso start %d (cur=%d) asap=%d\n",
+ urb->start_frame, cur_frame,
+ (urb->transfer_flags & URB_ISO_ASAP) != 0);
+ i = DIV_ROUND_UP(wrap_frame(
+ cur_frame - urb->start_frame),
+ urb->interval);
+ if (urb->transfer_flags & URB_ISO_ASAP) {
+ urb->start_frame = wrap_frame(urb->start_frame
+ + i * urb->interval);
+ i = 0;
+ } else if (i >= urb->number_of_packets) {
+ ret = -EXDEV;
+ goto alloc_dmem_failed;
+ }
+ }
}
/* set up transfers */
+ urb_priv->isoc_remaining = urb->number_of_packets - i;
td = urb_priv->isoc_td;
- for (i = 0; i < urb->number_of_packets; i++, td++) {
+ for (; i < urb->number_of_packets; i++, td++) {
unsigned int offset = urb->iso_frame_desc[i].offset;
td->ep = ep;
td->urb = urb;
@@ -840,7 +850,6 @@ static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd,
list_add_tail(&td->list, &ep_priv->td_list);
}
- urb_priv->isoc_remaining = urb->number_of_packets;
dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n",
urb->number_of_packets, urb->start_frame, td->frame);
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index a13709ee4e5..3df49b169b5 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -118,7 +118,7 @@ static int of_isp1760_probe(struct platform_device *dev)
goto free_gpio;
}
- dev_set_drvdata(&dev->dev, drvdata);
+ platform_set_drvdata(dev, drvdata);
return ret;
free_gpio:
@@ -133,9 +133,7 @@ free_data:
static int of_isp1760_remove(struct platform_device *dev)
{
- struct isp1760 *drvdata = dev_get_drvdata(&dev->dev);
-
- dev_set_drvdata(&dev->dev, NULL);
+ struct isp1760 *drvdata = platform_get_drvdata(dev);
usb_remove_hcd(drvdata->hcd);
iounmap(drvdata->hcd->regs);
@@ -398,7 +396,7 @@ static int isp1760_plat_probe(struct platform_device *pdev)
irqflags, -ENOENT,
&pdev->dev, dev_name(&pdev->dev), devflags);
- dev_set_drvdata(&pdev->dev, hcd);
+ platform_set_drvdata(pdev, hcd);
if (IS_ERR(hcd)) {
pr_warning("isp1760: Failed to register the HCD device\n");
@@ -419,7 +417,7 @@ static int isp1760_plat_remove(struct platform_device *pdev)
{
struct resource *mem_res;
resource_size_t mem_size;
- struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 2ee1496dbc1..9677f683120 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -41,17 +41,17 @@ extern int usb_disabled(void);
static void at91_start_clock(void)
{
- clk_enable(hclk);
- clk_enable(iclk);
- clk_enable(fclk);
+ clk_prepare_enable(hclk);
+ clk_prepare_enable(iclk);
+ clk_prepare_enable(fclk);
clocked = 1;
}
static void at91_stop_clock(void)
{
- clk_disable(fclk);
- clk_disable(iclk);
- clk_disable(hclk);
+ clk_disable_unprepare(fclk);
+ clk_disable_unprepare(iclk);
+ clk_disable_unprepare(hclk);
clocked = 0;
}
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 0b815a85681..6aaa9c9c8eb 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -401,7 +401,6 @@ static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev)
struct usb_hcd *hcd = platform_get_drvdata(dev);
usb_hcd_da8xx_remove(hcd, dev);
- platform_set_drvdata(dev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index fc627fd5411..a9d3437da22 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -79,23 +79,8 @@ static const char hcd_name [] = "ohci_hcd";
#include "pci-quirks.h"
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
-static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
-#if defined(CONFIG_PM) || defined(CONFIG_PCI)
-static int ohci_restart (struct ohci_hcd *ohci);
-#endif
-
-#ifdef CONFIG_PCI
-static void sb800_prefetch(struct ohci_hcd *ohci, int on);
-#else
-static inline void sb800_prefetch(struct ohci_hcd *ohci, int on)
-{
- return;
-}
-#endif
-
-
#include "ohci-hub.c"
#include "ohci-dbg.c"
#include "ohci-mem.c"
@@ -772,6 +757,32 @@ retry:
return 0;
}
+/* ohci_setup routine for generic controller initialization */
+
+int ohci_setup(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ ohci_hcd_init(ohci);
+
+ return ohci_init(ohci);
+}
+EXPORT_SYMBOL_GPL(ohci_setup);
+
+/* ohci_start routine for generic controller start of all OHCI bus glue */
+static int ohci_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ ohci_err(ohci, "can't start\n");
+ ohci_stop(hcd);
+ }
+ return ret;
+}
+
/*-------------------------------------------------------------------------*/
/* an interrupt happens */
@@ -953,12 +964,13 @@ static void ohci_stop (struct usb_hcd *hcd)
#if defined(CONFIG_PM) || defined(CONFIG_PCI)
/* must not be called from interrupt context */
-static int ohci_restart (struct ohci_hcd *ohci)
+int ohci_restart(struct ohci_hcd *ohci)
{
int temp;
int i;
struct urb_priv *priv;
+ ohci_init(ohci);
spin_lock_irq(&ohci->lock);
ohci->rh_state = OHCI_RH_HALTED;
@@ -1012,12 +1024,13 @@ static int ohci_restart (struct ohci_hcd *ohci)
ohci_dbg(ohci, "restart complete\n");
return 0;
}
+EXPORT_SYMBOL_GPL(ohci_restart);
#endif
#ifdef CONFIG_PM
-static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
@@ -1035,9 +1048,10 @@ static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
return 0;
}
+EXPORT_SYMBOL_GPL(ohci_suspend);
-static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated)
+int ohci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int port;
@@ -1085,20 +1099,79 @@ static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated)
return 0;
}
+EXPORT_SYMBOL_GPL(ohci_resume);
#endif
/*-------------------------------------------------------------------------*/
+/*
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
+ */
+
+static const struct hc_driver ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "OHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ohci_setup,
+ .start = ohci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+void ohci_init_driver(struct hc_driver *drv,
+ const struct ohci_driver_overrides *over)
+{
+ /* Copy the generic table to drv and then apply the overrides */
+ *drv = ohci_hc_driver;
+
+ drv->product_desc = over->product_desc;
+ drv->hcd_priv_size += over->extra_priv_size;
+ if (over->reset)
+ drv->reset = over->reset;
+}
+EXPORT_SYMBOL_GPL(ohci_init_driver);
+
+/*-------------------------------------------------------------------------*/
+
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_PCI
-#include "ohci-pci.c"
-#define PCI_DRIVER ohci_pci_driver
-#endif
-
#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
#include "ohci-sa1111.c"
#define SA1111_DRIVER ohci_hcd_sa1111_driver
@@ -1189,30 +1262,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_tilegx_driver
#endif
-#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
-#include "ohci-platform.c"
-#define PLATFORM_DRIVER ohci_platform_driver
-#endif
-
-#if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
- !defined(OMAP3_PLATFORM_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
- !defined(SA1111_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
- !defined(S3C2410_PLATFORM_DRIVER) && \
- !defined(EXYNOS_PLATFORM_DRIVER) && \
- !defined(EP93XX_PLATFORM_DRIVER) && \
- !defined(AT91_PLATFORM_DRIVER) && \
- !defined(NXP_PLATFORM_DRIVER) && \
- !defined(DAVINCI_PLATFORM_DRIVER) && \
- !defined(SPEAR_PLATFORM_DRIVER)
-#error "missing bus glue for ohci-hcd"
-#endif
-
static int __init ohci_hcd_mod_init(void)
{
int retval = 0;
@@ -1269,12 +1318,6 @@ static int __init ohci_hcd_mod_init(void)
goto error_sa1111;
#endif
-#ifdef PCI_DRIVER
- retval = pci_register_driver(&PCI_DRIVER);
- if (retval < 0)
- goto error_pci;
-#endif
-
#ifdef SM501_OHCI_DRIVER
retval = platform_driver_register(&SM501_OHCI_DRIVER);
if (retval < 0)
@@ -1368,10 +1411,6 @@ static int __init ohci_hcd_mod_init(void)
platform_driver_unregister(&SM501_OHCI_DRIVER);
error_sm501:
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- error_pci:
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
error_sa1111:
@@ -1436,9 +1475,6 @@ static void __exit ohci_hcd_mod_exit(void)
#ifdef SM501_OHCI_DRIVER
platform_driver_unregister(&SM501_OHCI_DRIVER);
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 60ff4220e8b..2347ab83f04 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -176,7 +176,6 @@ __acquires(ohci->lock)
if (status == -EBUSY) {
if (!autostopped) {
spin_unlock_irq (&ohci->lock);
- (void) ohci_init (ohci);
status = ohci_restart (ohci);
usb_root_hub_lost_power(hcd->self.root_hub);
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index 8062bb9dea1..d4ef53990d7 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -221,7 +221,6 @@ static int jz4740_ohci_probe(struct platform_device *pdev)
return 0;
err_disable:
- platform_set_drvdata(pdev, NULL);
if (jz4740_ohci->vbus) {
regulator_disable(jz4740_ohci->vbus);
regulator_put(jz4740_ohci->vbus);
@@ -246,8 +245,6 @@ static int jz4740_ohci_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
-
if (jz4740_ohci->vbus) {
regulator_disable(jz4740_ohci->vbus);
regulator_put(jz4740_ohci->vbus);
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 5d7eb72c506..7d7d507d54e 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -351,7 +351,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
nxp_stop_hc();
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
clk_disable(usb_pll_clk);
clk_put(usb_pll_clk);
@@ -360,8 +359,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev)
i2c_unregister_device(isp1301_i2c_client);
isp1301_i2c_client = NULL;
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c
index d44430d009f..342dc7e543b 100644
--- a/drivers/usb/host/ohci-octeon.c
+++ b/drivers/usb/host/ohci-octeon.c
@@ -196,8 +196,6 @@ static int ohci_octeon_drv_remove(struct platform_device *pdev)
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index b1d32fb4a7a..8747fa6a51b 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -498,7 +498,6 @@ static int ohci_hcd_omap_drv_remove(struct platform_device *dev)
struct usb_hcd *hcd = platform_get_drvdata(dev);
usb_hcd_omap_remove(hcd, dev);
- platform_set_drvdata(dev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 8663851c8d8..8f713571a0b 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -252,7 +252,7 @@ static struct platform_driver ohci_hcd_omap3_driver = {
.shutdown = ohci_hcd_omap3_shutdown,
.driver = {
.name = "ohci-omap3",
- .of_match_table = of_match_ptr(omap_ohci_dt_ids),
+ .of_match_table = omap_ohci_dt_ids,
},
};
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 951514ef446..08613e24189 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -14,12 +14,19 @@
* This file is licenced under the GPL.
*/
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue. CONFIG_PCI must be defined."
-#endif
-
-#include <linux/pci.h>
#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "OHCI PCI platform driver"
+
+static const char hcd_name[] = "ohci-pci";
/*-------------------------------------------------------------------------*/
@@ -123,13 +130,6 @@ static void ohci_quirk_nec_worker(struct work_struct *work)
struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
int status;
- status = ohci_init(ohci);
- if (status != 0) {
- ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
- "ohci_init", status);
- return;
- }
-
status = ohci_restart(ohci);
if (status != 0)
ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
@@ -175,19 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
return 0;
}
-static void sb800_prefetch(struct ohci_hcd *ohci, int on)
-{
- struct pci_dev *pdev;
- u16 misc;
-
- pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
- pci_read_config_word(pdev, 0x50, &misc);
- if (on == 0)
- pci_write_config_word(pdev, 0x50, misc & 0xfcff);
- else
- pci_write_config_word(pdev, 0x50, misc | 0x0300);
-}
-
/* List of quirks for OHCI */
static const struct pci_device_id ohci_pci_quirks[] = {
{
@@ -249,10 +236,10 @@ static const struct pci_device_id ohci_pci_quirks[] = {
static int ohci_pci_reset (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int ret = 0;
if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
const struct pci_device_id *quirk_id;
quirk_id = pci_match_id(ohci_pci_quirks, pdev);
@@ -262,94 +249,25 @@ static int ohci_pci_reset (struct usb_hcd *hcd)
ret = quirk(hcd);
}
}
- if (ret == 0) {
- ohci_hcd_init (ohci);
- return ohci_init (ohci);
- }
- return ret;
-}
-
-
-static int ohci_pci_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
-#ifdef CONFIG_PM /* avoid warnings about unused pdev */
- if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
- /* RWC may not be set for add-in PCI cards, since boot
- * firmware probably ignored them. This transfers PCI
- * PM wakeup capabilities.
- */
- if (device_can_wakeup(&pdev->dev))
- ohci->hc_control |= OHCI_CTRL_RWC;
- }
-#endif /* CONFIG_PM */
- ret = ohci_run (ohci);
- if (ret < 0) {
- ohci_err (ohci, "can't start\n");
- ohci_stop (hcd);
- }
+ if (ret == 0)
+ ret = ohci_setup(hcd);
+ /*
+ * After ohci setup RWC may not be set for add-in PCI cards.
+ * This transfers PCI PM wakeup capabilities.
+ */
+ if (device_can_wakeup(&pdev->dev))
+ ohci->hc_control |= OHCI_CTRL_RWC;
return ret;
}
+static struct hc_driver __read_mostly ohci_pci_hc_driver;
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pci_hc_driver = {
- .description = hcd_name,
- .product_desc = "OHCI Host Controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
-
- /*
- * basic lifecycle operations
- */
+static const struct ohci_driver_overrides pci_overrides __initconst = {
+ .product_desc = "OHCI PCI host controller",
.reset = ohci_pci_reset,
- .start = ohci_pci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
-#ifdef CONFIG_PM
- .pci_suspend = ohci_suspend,
- .pci_resume = ohci_resume,
-#endif
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
};
-/*-------------------------------------------------------------------------*/
-
-
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
@@ -377,3 +295,24 @@ static struct pci_driver ohci_pci_driver = {
},
#endif
};
+
+static int __init ohci_pci_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
+ return pci_register_driver(&ohci_pci_driver);
+}
+module_init(ohci_pci_init);
+
+static void __exit ohci_pci_cleanup(void)
+{
+ pci_unregister_driver(&ohci_pci_driver);
+}
+module_exit(ohci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index c3e7287f792..bc30475c3a2 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -13,16 +13,28 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
+
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/usb/ohci_pdriver.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI generic platform driver"
+
+static const char hcd_name[] = "ohci-platform";
static int ohci_platform_reset(struct usb_hcd *hcd)
{
struct platform_device *pdev = to_platform_device(hcd->self.controller);
struct usb_ohci_pdata *pdata = pdev->dev.platform_data;
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int err;
if (pdata->big_endian_desc)
ohci->flags |= OHCI_QUIRK_BE_DESC;
@@ -30,58 +42,17 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
ohci->flags |= OHCI_QUIRK_BE_MMIO;
if (pdata->no_big_frame_no)
ohci->flags |= OHCI_QUIRK_FRAME_NO;
-
- ohci_hcd_init(ohci);
-
if (pdata->num_ports)
ohci->num_ports = pdata->num_ports;
- err = ohci_init(ohci);
-
- return err;
-}
-
-static int ohci_platform_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int err;
-
- err = ohci_run(ohci);
- if (err < 0) {
- ohci_err(ohci, "can't start\n");
- ohci_stop(hcd);
- }
-
- return err;
+ return ohci_setup(hcd);
}
-static const struct hc_driver ohci_platform_hc_driver = {
- .description = hcd_name,
- .product_desc = "Generic Platform OHCI Controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
+static struct hc_driver __read_mostly ohci_platform_hc_driver;
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
-
- .reset = ohci_platform_reset,
- .start = ohci_platform_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- .get_frame_number = ohci_get_frame,
-
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
-
- .start_port_reset = ohci_start_port_reset,
+static const struct ohci_driver_overrides platform_overrides __initconst = {
+ .product_desc = "Generic Platform OHCI controller",
+ .reset = ohci_platform_reset,
};
static int ohci_platform_probe(struct platform_device *dev)
@@ -157,7 +128,6 @@ static int ohci_platform_remove(struct platform_device *dev)
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
- platform_set_drvdata(dev, NULL);
if (pdata->power_off)
pdata->power_off(dev);
@@ -223,3 +193,26 @@ static struct platform_driver ohci_platform_driver = {
.pm = &ohci_platform_pm_ops,
}
};
+
+static int __init ohci_platform_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
+ return platform_driver_register(&ohci_platform_driver);
+}
+module_init(ohci_platform_init);
+
+static void __exit ohci_platform_cleanup(void)
+{
+ platform_driver_unregister(&ohci_platform_driver);
+}
+module_exit(ohci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 64c2ed9ff95..8294e2fcc2f 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -185,8 +185,7 @@ err_rmr:
static int ohci_hcd_ppc_of_remove(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
- dev_set_drvdata(&op->dev, NULL);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
@@ -203,7 +202,7 @@ static int ohci_hcd_ppc_of_remove(struct platform_device *op)
static void ohci_hcd_ppc_of_shutdown(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 279b2ef1741..3a9c01d8b79 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -556,7 +556,6 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_pxa27x_remove(hcd, pdev);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 88731b7c5f4..df4a6707322 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -41,6 +41,7 @@ finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status)
__releases(ohci->lock)
__acquires(ohci->lock)
{
+ struct device *dev = ohci_to_hcd(ohci)->self.controller;
// ASSERT (urb->hcpriv != 0);
urb_free_priv (ohci, urb->hcpriv);
@@ -55,7 +56,7 @@ __acquires(ohci->lock)
if (quirk_amdiso(ohci))
usb_amd_quirk_pll_enable();
if (quirk_amdprefetch(ohci))
- sb800_prefetch(ohci, 0);
+ sb800_prefetch(dev, 0);
}
break;
case PIPE_INTERRUPT:
@@ -580,6 +581,7 @@ static void td_submit_urb (
struct urb *urb
) {
struct urb_priv *urb_priv = urb->hcpriv;
+ struct device *dev = ohci_to_hcd(ohci)->self.controller;
dma_addr_t data;
int data_len = urb->transfer_buffer_length;
int cnt = 0;
@@ -689,7 +691,7 @@ static void td_submit_urb (
if (quirk_amdiso(ohci))
usb_amd_quirk_pll_disable();
if (quirk_amdprefetch(ohci))
- sb800_prefetch(ohci, 1);
+ sb800_prefetch(dev, 1);
}
periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 3b5b908fd47..d479d5ddab8 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -207,7 +207,6 @@ static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev)
sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6);
sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 3e19e0170d1..cc9dd9e4f05 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -179,8 +179,6 @@ static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
spear_stop_ohci(ohci_p);
usb_put_hcd(hcd);
-
- platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -232,7 +230,7 @@ static struct platform_driver spear_ohci_hcd_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "spear-ohci",
- .of_match_table = of_match_ptr(spear_ohci_id_table),
+ .of_match_table = spear_ohci_id_table,
},
};
diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c
index ea73009de62..197d514fe0d 100644
--- a/drivers/usb/host/ohci-tilegx.c
+++ b/drivers/usb/host/ohci-tilegx.c
@@ -182,7 +182,6 @@ static int ohci_hcd_tilegx_drv_remove(struct platform_device *pdev)
tilegx_stop_ohc();
gxio_usb_host_destroy(&pdata->usb_ctx);
destroy_irq(pdata->irq);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 5e3a6deb62b..ecb09a5ada9 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -287,8 +287,6 @@ static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
iounmap(tmio->ccr);
usb_put_hcd(hcd);
- platform_set_drvdata(dev, NULL);
-
return 0;
}
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index d3299143d9e..e2e5faa5a40 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -421,6 +421,9 @@ struct ohci_hcd {
struct dentry *debug_periodic;
struct dentry *debug_registers;
#endif
+ /* platform-specific data -- must come last */
+ unsigned long priv[0] __aligned(sizeof(s64));
+
};
#ifdef CONFIG_PCI
@@ -718,3 +721,20 @@ static inline u32 roothub_status (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.status); }
static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+/* Declarations of things exported for use by ohci platform drivers */
+
+struct ohci_driver_overrides {
+ const char *product_desc;
+ size_t extra_priv_size;
+ int (*reset)(struct usb_hcd *hcd);
+};
+
+extern void ohci_init_driver(struct hc_driver *drv,
+ const struct ohci_driver_overrides *over);
+extern int ohci_restart(struct ohci_hcd *ohci);
+extern int ohci_setup(struct usb_hcd *hcd);
+#ifdef CONFIG_PM
+extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup);
+extern int ohci_resume(struct usb_hcd *hcd, bool hibernated);
+#endif
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 0f401dbfaf0..4a6df2d8f90 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3874,7 +3874,6 @@ static int oxu_drv_probe(struct platform_device *pdev)
error_init:
kfree(info);
- platform_set_drvdata(pdev, NULL);
error_alloc:
iounmap(base);
@@ -3907,7 +3906,6 @@ static int oxu_drv_remove(struct platform_device *pdev)
release_mem_region(memstart, memlen);
kfree(info);
- platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 4c338ec03a0..b9848e4d3d4 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -91,6 +91,19 @@ static struct amd_chipset_info {
static DEFINE_SPINLOCK(amd_lock);
+void sb800_prefetch(struct device *dev, int on)
+{
+ u16 misc;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+EXPORT_SYMBOL_GPL(sb800_prefetch);
+
int usb_amd_find_chipset_info(void)
{
u8 rev = 0;
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 7f69a39163c..4b8a2092432 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -11,11 +11,13 @@ void usb_amd_quirk_pll_enable(void);
bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+void sb800_prefetch(struct device *dev, int on);
#else
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
static inline void usb_amd_dev_put(void) {}
static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
+static inline void sb800_prefetch(struct device *dev, int on) {}
#endif /* CONFIG_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
index 511bfc46dd7..53c23ff7d68 100644
--- a/drivers/usb/host/uhci-grlib.c
+++ b/drivers/usb/host/uhci-grlib.c
@@ -157,9 +157,7 @@ err_rmr:
static int uhci_hcd_grlib_remove(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
-
- dev_set_drvdata(&op->dev, NULL);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n");
@@ -183,7 +181,7 @@ static int uhci_hcd_grlib_remove(struct platform_device *op)
*/
static void uhci_hcd_grlib_shutdown(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
uhci_hc_died(hcd_to_uhci(hcd));
}
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index f1db61ada6a..d033a0ec7f0 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -130,7 +130,6 @@ static int uhci_hcd_platform_remove(struct platform_device *pdev)
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -144,7 +143,7 @@ static int uhci_hcd_platform_remove(struct platform_device *pdev)
*/
static void uhci_hcd_platform_shutdown(struct platform_device *op)
{
- struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct usb_hcd *hcd = platform_get_drvdata(op);
uhci_hc_died(hcd_to_uhci(hcd));
}
@@ -161,6 +160,6 @@ static struct platform_driver uhci_platform_driver = {
.driver = {
.name = "platform-uhci",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(platform_uhci_ids),
+ .of_match_table = platform_uhci_ids,
},
};
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index c3a647816af..ecc88db804e 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -231,8 +231,6 @@ static struct hc_driver whc_hc_driver = {
.hub_status_data = wusbhc_rh_status_data,
.hub_control = wusbhc_rh_control,
- .bus_suspend = wusbhc_rh_suspend,
- .bus_resume = wusbhc_rh_resume,
.start_port_reset = wusbhc_rh_start_port_reset,
};
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 5f3a7c74aa8..5d5e58fdecc 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -503,11 +503,14 @@ static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
if (last_ep < 31)
last_ep_ctx = last_ep + 1;
for (i = 0; i < last_ep_ctx; ++i) {
+ unsigned int epaddr = xhci_get_endpoint_address(i);
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
dma_addr_t dma = ctx->dma +
((unsigned long)ep_ctx - (unsigned long)ctx->bytes);
- xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
+ xhci_dbg(xhci, "%s Endpoint %02d Context (ep_index %02d):\n",
+ usb_endpoint_out(epaddr) ? "OUT" : "IN",
+ epaddr & USB_ENDPOINT_NUMBER_MASK, i);
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
&ep_ctx->ep_info,
(unsigned long long)dma, ep_ctx->ep_info);
@@ -550,6 +553,11 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci,
if (ctx->type == XHCI_CTX_TYPE_INPUT) {
struct xhci_input_control_ctx *ctrl_ctx =
xhci_get_input_control_ctx(xhci, ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "Could not get input context, bad type.\n");
+ return;
+ }
+
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
&ctrl_ctx->drop_flags, (unsigned long long)dma,
ctrl_ctx->drop_flags);
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 377f4242dab..8d7a1324e2f 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -71,6 +71,7 @@
/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
#define XHCI_HLC (1 << 19)
+#define XHCI_BLC (1 << 19)
/* command register values to disable interrupts and halt the HC */
/* start/stop HC execution - do not write unless HC is halted*/
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 187a3ec1069..1d3545943c5 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -867,18 +867,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case USB_PORT_FEAT_U1_TIMEOUT:
if (hcd->speed != HCD_USB3)
goto error;
- temp = xhci_readl(xhci, port_array[wIndex] + 1);
+ temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
temp |= PORT_U1_TIMEOUT(timeout);
- xhci_writel(xhci, temp, port_array[wIndex] + 1);
+ xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
break;
case USB_PORT_FEAT_U2_TIMEOUT:
if (hcd->speed != HCD_USB3)
goto error;
- temp = xhci_readl(xhci, port_array[wIndex] + 1);
+ temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
temp |= PORT_U2_TIMEOUT(timeout);
- xhci_writel(xhci, temp, port_array[wIndex] + 1);
+ xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
break;
default:
goto error;
@@ -1098,10 +1098,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
__le32 __iomem *addr;
u32 tmp;
- /* Add one to the port status register address to get
- * the port power control register address.
- */
- addr = port_array[port_index] + 1;
+ /* Get the port power control register address. */
+ addr = port_array[port_index] + PORTPMSC;
tmp = xhci_readl(xhci, addr);
tmp |= PORT_RWE;
xhci_writel(xhci, tmp, addr);
@@ -1193,7 +1191,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
/* Add one to the port status register address to get
* the port power control register address.
*/
- addr = port_array[port_index] + 1;
+ addr = port_array[port_index] + PORTPMSC;
tmp = xhci_readl(xhci, addr);
tmp &= ~PORT_RWE;
xhci_writel(xhci, tmp, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fbf75e57628..df6978abd7e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -358,17 +358,25 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
int type, gfp_t flags)
{
- struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+ struct xhci_container_ctx *ctx;
+
+ if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT))
+ return NULL;
+
+ ctx = kzalloc(sizeof(*ctx), flags);
if (!ctx)
return NULL;
- BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
ctx->type = type;
ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
if (type == XHCI_CTX_TYPE_INPUT)
ctx->size += CTX_SIZE(xhci->hcc_params);
ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+ if (!ctx->bytes) {
+ kfree(ctx);
+ return NULL;
+ }
memset(ctx->bytes, 0, ctx->size);
return ctx;
}
@@ -385,7 +393,9 @@ static void xhci_free_container_ctx(struct xhci_hcd *xhci,
struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx)
{
- BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+ if (ctx->type != XHCI_CTX_TYPE_INPUT)
+ return NULL;
+
return (struct xhci_input_control_ctx *)ctx->bytes;
}
@@ -1049,6 +1059,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
struct xhci_ep_ctx *ep0_ctx;
struct xhci_slot_ctx *slot_ctx;
u32 port_num;
+ u32 max_packets;
struct usb_device *top_dev;
dev = xhci->devs[udev->slot_id];
@@ -1066,15 +1077,20 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
switch (udev->speed) {
case USB_SPEED_SUPER:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
+ max_packets = MAX_PACKET(512);
break;
case USB_SPEED_HIGH:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
+ max_packets = MAX_PACKET(64);
break;
+ /* USB core guesses at a 64-byte max packet first for FS devices */
case USB_SPEED_FULL:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
+ max_packets = MAX_PACKET(64);
break;
case USB_SPEED_LOW:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
+ max_packets = MAX_PACKET(8);
break;
case USB_SPEED_WIRELESS:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -1082,7 +1098,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
break;
default:
/* Speed was set earlier, this shouldn't happen. */
- BUG();
+ return -EINVAL;
}
/* Find the root hub port this device is under */
port_num = xhci_find_real_port_number(xhci, udev);
@@ -1141,31 +1157,10 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
/* Step 4 - ring already allocated */
/* Step 5 */
ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
- /*
- * XXX: Not sure about wireless USB devices.
- */
- switch (udev->speed) {
- case USB_SPEED_SUPER:
- ep0_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(512));
- break;
- case USB_SPEED_HIGH:
- /* USB core guesses at a 64-byte max packet first for FS devices */
- case USB_SPEED_FULL:
- ep0_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(64));
- break;
- case USB_SPEED_LOW:
- ep0_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(8));
- break;
- case USB_SPEED_WIRELESS:
- xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
- return -EINVAL;
- break;
- default:
- /* New speed? */
- BUG();
- }
+
/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
- ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3));
+ ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) |
+ max_packets);
ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma |
dev->eps[0].ring->cycle_state);
@@ -1338,7 +1333,7 @@ static u32 xhci_get_endpoint_type(struct usb_device *udev,
else
type = EP_TYPE(INT_OUT_EP);
} else {
- BUG();
+ type = 0;
}
return type;
}
@@ -1384,10 +1379,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
unsigned int max_burst;
enum xhci_ring_type type;
u32 max_esit_payload;
+ u32 endpoint_type;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+ endpoint_type = xhci_get_endpoint_type(udev, ep);
+ if (!endpoint_type)
+ return -EINVAL;
+ ep_ctx->ep_info2 = cpu_to_le32(endpoint_type);
+
type = usb_endpoint_type(&ep->desc);
/* Set up the endpoint ring */
virt_dev->eps[ep_index].new_ring =
@@ -1416,11 +1417,9 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
* CErr shall be set to 0 for Isoch endpoints.
*/
if (!usb_endpoint_xfer_isoc(&ep->desc))
- ep_ctx->ep_info2 = cpu_to_le32(ERROR_COUNT(3));
+ ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(3));
else
- ep_ctx->ep_info2 = cpu_to_le32(ERROR_COUNT(0));
-
- ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
+ ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(0));
/* Set the max packet size and max burst */
max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
@@ -1856,6 +1855,7 @@ no_bw:
kfree(xhci->usb3_ports);
kfree(xhci->port_array);
kfree(xhci->rh_bw);
+ kfree(xhci->ext_caps);
xhci->page_size = 0;
xhci->page_shift = 0;
@@ -2043,7 +2043,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
}
static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
- __le32 __iomem *addr, u8 major_revision)
+ __le32 __iomem *addr, u8 major_revision, int max_caps)
{
u32 temp, port_offset, port_count;
int i;
@@ -2068,6 +2068,10 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
/* WTF? "Valid values are ‘1’ to MaxPorts" */
return;
+ /* cache usb2 port capabilities */
+ if (major_revision < 0x03 && xhci->num_ext_caps < max_caps)
+ xhci->ext_caps[xhci->num_ext_caps++] = temp;
+
/* Check the host's USB2 LPM capability */
if ((xhci->hci_version == 0x96) && (major_revision != 0x03) &&
(temp & XHCI_L1C)) {
@@ -2125,10 +2129,11 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
*/
static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
{
- __le32 __iomem *addr;
- u32 offset;
+ __le32 __iomem *addr, *tmp_addr;
+ u32 offset, tmp_offset;
unsigned int num_ports;
int i, j, port_index;
+ int cap_count = 0;
addr = &xhci->cap_regs->hcc_params;
offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
@@ -2161,13 +2166,32 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
* See section 5.3.6 for offset calculation.
*/
addr = &xhci->cap_regs->hc_capbase + offset;
+
+ tmp_addr = addr;
+ tmp_offset = offset;
+
+ /* count extended protocol capability entries for later caching */
+ do {
+ u32 cap_id;
+ cap_id = xhci_readl(xhci, tmp_addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ cap_count++;
+ tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ tmp_addr += tmp_offset;
+ } while (tmp_offset);
+
+ xhci->ext_caps = kzalloc(sizeof(*xhci->ext_caps) * cap_count, flags);
+ if (!xhci->ext_caps)
+ return -ENOMEM;
+
while (1) {
u32 cap_id;
cap_id = xhci_readl(xhci, addr);
if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
xhci_add_in_port(xhci, num_ports, addr,
- (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id),
+ cap_count);
offset = XHCI_EXT_CAPS_NEXT(cap_id);
if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
== num_ports)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index df90fe51b4a..51e22bf8950 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -130,7 +130,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto unmap_registers;
/* USB 2.0 roothub is stored in the platform_device now. */
- hcd = dev_get_drvdata(&pdev->dev);
+ hcd = platform_get_drvdata(pdev);
xhci = hcd_to_xhci(hcd);
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
dev_name(&pdev->dev), hcd);
@@ -179,6 +179,7 @@ static int xhci_plat_remove(struct platform_device *dev)
usb_remove_hcd(hcd);
iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
kfree(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1969c001b3f..1e57eafa691 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1424,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
*/
ctrl_ctx = xhci_get_input_control_ctx(xhci,
virt_dev->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "Could not get input context, bad type.\n");
+ break;
+ }
/* Input ctx add_flags are the endpoint index plus one */
ep_index = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)) - 1;
/* A usb_set_interface() call directly after clearing a halted
@@ -2799,7 +2803,7 @@ hw_died:
return IRQ_HANDLED;
}
-irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
+irqreturn_t xhci_msi_irq(int irq, void *hcd)
{
return xhci_irq(hcd);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index d8f640b12dd..2c49f00260c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -218,7 +218,7 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
return ret;
}
- ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
+ ret = request_irq(pdev->irq, xhci_msi_irq,
0, "xhci_hcd", xhci_to_hcd(xhci));
if (ret) {
xhci_dbg(xhci, "disable MSI interrupt\n");
@@ -290,7 +290,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
for (i = 0; i < xhci->msix_count; i++) {
ret = request_irq(xhci->msix_entries[i].vector,
- (irq_handler_t)xhci_msi_irq,
+ xhci_msi_irq,
0, "xhci_hcd", xhci_to_hcd(xhci));
if (ret)
goto disable_msix;
@@ -1121,6 +1121,16 @@ unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
return index;
}
+/* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint
+ * address from the XHCI endpoint index.
+ */
+unsigned int xhci_get_endpoint_address(unsigned int ep_index)
+{
+ unsigned int number = DIV_ROUND_UP(ep_index, 2);
+ unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN;
+ return direction | number;
+}
+
/* Find the flag for this endpoint (for use in the control context). Use the
* endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
* bit 1, etc.
@@ -1225,19 +1235,25 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
hw_max_packet_size);
xhci_dbg(xhci, "Issuing evaluate context command.\n");
+ /* Set up the input context flags for the command */
+ /* FIXME: This won't work if a non-default control endpoint
+ * changes max packet sizes.
+ */
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
/* Set up the modified control endpoint 0 */
xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
xhci->devs[slot_id]->out_ctx, ep_index);
- in_ctx = xhci->devs[slot_id]->in_ctx;
+
ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
- /* Set up the input context flags for the command */
- /* FIXME: This won't work if a non-default control endpoint
- * changes max packet sizes.
- */
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
ctrl_ctx->drop_flags = 0;
@@ -1597,6 +1613,12 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
out_ctx = xhci->devs[udev->slot_id]->out_ctx;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return 0;
+ }
+
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HC already knows the endpoint is disabled,
@@ -1691,8 +1713,13 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
in_ctx = virt_dev->in_ctx;
out_ctx = virt_dev->out_ctx;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
- ep_index = xhci_get_endpoint_index(&ep->desc);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return 0;
+ }
+ ep_index = xhci_get_endpoint_index(&ep->desc);
/* If this endpoint is already in use, and the upper layers are trying
* to add it again without dropping it, reject the addition.
*/
@@ -1765,12 +1792,18 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir
struct xhci_slot_ctx *slot_ctx;
int i;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return;
+ }
+
/* When a device's add flag and drop flag are zero, any subsequent
* configure endpoint command will leave that endpoint's state
* untouched. Make sure we don't leave any old state in the input
* endpoint contexts.
*/
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
ctrl_ctx->drop_flags = 0;
ctrl_ctx->add_flags = 0;
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
@@ -1877,13 +1910,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
}
static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
- struct xhci_container_ctx *in_ctx)
+ struct xhci_input_control_ctx *ctrl_ctx)
{
- struct xhci_input_control_ctx *ctrl_ctx;
u32 valid_add_flags;
u32 valid_drop_flags;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
/* Ignore the slot flag (bit 0), and the default control endpoint flag
* (bit 1). The default control endpoint is added during the Address
* Device command and is never removed until the slot is disabled.
@@ -1900,13 +1931,11 @@ static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
}
static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
- struct xhci_container_ctx *in_ctx)
+ struct xhci_input_control_ctx *ctrl_ctx)
{
- struct xhci_input_control_ctx *ctrl_ctx;
u32 valid_add_flags;
u32 valid_drop_flags;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
valid_add_flags = ctrl_ctx->add_flags >> 2;
valid_drop_flags = ctrl_ctx->drop_flags >> 2;
@@ -1928,11 +1957,11 @@ static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
* Must be called with xhci->lock held.
*/
static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
- struct xhci_container_ctx *in_ctx)
+ struct xhci_input_control_ctx *ctrl_ctx)
{
u32 added_eps;
- added_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+ added_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
xhci_dbg(xhci, "Not enough ep ctxs: "
"%u active, need to add %u, limit is %u.\n",
@@ -1953,11 +1982,11 @@ static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
* Must be called with xhci->lock held.
*/
static void xhci_free_host_resources(struct xhci_hcd *xhci,
- struct xhci_container_ctx *in_ctx)
+ struct xhci_input_control_ctx *ctrl_ctx)
{
u32 num_failed_eps;
- num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+ num_failed_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
xhci->num_active_eps -= num_failed_eps;
xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n",
num_failed_eps,
@@ -1971,11 +2000,11 @@ static void xhci_free_host_resources(struct xhci_hcd *xhci,
* Must be called with xhci->lock held.
*/
static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
- struct xhci_container_ctx *in_ctx)
+ struct xhci_input_control_ctx *ctrl_ctx)
{
u32 num_dropped_eps;
- num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx);
+ num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, ctrl_ctx);
xhci->num_active_eps -= num_dropped_eps;
if (num_dropped_eps)
xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n",
@@ -2470,6 +2499,11 @@ static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
old_active_eps = virt_dev->tt_info->active_eps;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
for (i = 0; i < 31; i++) {
if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
@@ -2554,6 +2588,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
int timeleft;
unsigned long flags;
struct xhci_container_ctx *in_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
struct completion *cmd_completion;
u32 *cmd_status;
struct xhci_virt_device *virt_dev;
@@ -2566,9 +2601,16 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
in_ctx = command->in_ctx;
else
in_ctx = virt_dev->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
- xhci_reserve_host_resources(xhci, in_ctx)) {
+ xhci_reserve_host_resources(xhci, ctrl_ctx)) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "Not enough host resources, "
"active endpoint contexts = %u\n",
@@ -2578,7 +2620,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) {
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
- xhci_free_host_resources(xhci, in_ctx);
+ xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "Not enough bandwidth\n");
return -ENOMEM;
@@ -2614,7 +2656,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
if (command)
list_del(&command->cmd_list);
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
- xhci_free_host_resources(xhci, in_ctx);
+ xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
return -ENOMEM;
@@ -2650,9 +2692,9 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
* Otherwise, clean up the estimate to include dropped eps.
*/
if (ret)
- xhci_free_host_resources(xhci, in_ctx);
+ xhci_free_host_resources(xhci, ctrl_ctx);
else
- xhci_finish_resource_reservation(xhci, in_ctx);
+ xhci_finish_resource_reservation(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
}
return ret;
@@ -2689,6 +2731,11 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
@@ -2767,10 +2814,9 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx,
+ struct xhci_input_control_ctx *ctrl_ctx,
u32 add_flags, u32 drop_flags)
{
- struct xhci_input_control_ctx *ctrl_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ctrl_ctx->add_flags = cpu_to_le32(add_flags);
ctrl_ctx->drop_flags = cpu_to_le32(drop_flags);
xhci_slot_copy(xhci, in_ctx, out_ctx);
@@ -2784,14 +2830,22 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state)
{
+ struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_container_ctx *in_ctx;
struct xhci_ep_ctx *ep_ctx;
u32 added_ctxs;
dma_addr_t addr;
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return;
+ }
+
xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
xhci->devs[slot_id]->out_ctx, ep_index);
- in_ctx = xhci->devs[slot_id]->in_ctx;
ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
deq_state->new_deq_ptr);
@@ -2807,7 +2861,8 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx,
- xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs);
+ xhci->devs[slot_id]->out_ctx, ctrl_ctx,
+ added_ctxs, added_ctxs);
}
void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
@@ -3065,6 +3120,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
struct xhci_hcd *xhci;
struct xhci_virt_device *vdev;
struct xhci_command *config_cmd;
+ struct xhci_input_control_ctx *ctrl_ctx;
unsigned int ep_index;
unsigned int num_stream_ctxs;
unsigned long flags;
@@ -3086,6 +3142,13 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
return -ENOMEM;
}
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ xhci_free_command(xhci, config_cmd);
+ return -ENOMEM;
+ }
/* Check to make sure all endpoints are not already configured for
* streams. While we're at it, find the maximum number of streams that
@@ -3152,7 +3215,8 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
* and add the updated copy from the input context.
*/
xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
- vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
+ vdev->out_ctx, ctrl_ctx,
+ changed_ep_bitmask, changed_ep_bitmask);
/* Issue and wait for the configure endpoint command */
ret = xhci_configure_endpoint(xhci, udev, config_cmd,
@@ -3210,6 +3274,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
struct xhci_hcd *xhci;
struct xhci_virt_device *vdev;
struct xhci_command *command;
+ struct xhci_input_control_ctx *ctrl_ctx;
unsigned int ep_index;
unsigned long flags;
u32 changed_ep_bitmask;
@@ -3232,6 +3297,14 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
*/
ep_index = xhci_get_endpoint_index(&eps[0]->desc);
command = vdev->eps[ep_index].stream_info->free_streams_command;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -EINVAL;
+ }
+
for (i = 0; i < num_eps; i++) {
struct xhci_ep_ctx *ep_ctx;
@@ -3246,7 +3319,8 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
&vdev->eps[ep_index]);
}
xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
- vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
+ vdev->out_ctx, ctrl_ctx,
+ changed_ep_bitmask, changed_ep_bitmask);
spin_unlock_irqrestore(&xhci->lock, flags);
/* Issue and wait for the configure endpoint command,
@@ -3686,6 +3760,12 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
}
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -EINVAL;
+ }
/*
* If this is the first Set Address since device plug-in or
* virt_device realloaction after a resume with an xHCI power loss,
@@ -3696,7 +3776,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
/* Otherwise, update the control endpoint ring enqueue pointer. */
else
xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
ctrl_ctx->drop_flags = 0;
@@ -3815,6 +3894,63 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
return raw_port;
}
+/*
+ * Issue an Evaluate Context command to change the Maximum Exit Latency in the
+ * slot context. If that succeeds, store the new MEL in the xhci_virt_device.
+ */
+static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+ struct usb_device *udev, u16 max_exit_latency)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_command *command;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
+ }
+
+ /* Attempt to issue an Evaluate Context command to change the MEL. */
+ virt_dev = xhci->devs[udev->slot_id];
+ command = xhci->lpm_command;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+ slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+ slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
+ slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
+
+ xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n");
+ xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, command->in_ctx, 0);
+
+ /* Issue and wait for the evaluate context command. */
+ ret = xhci_configure_endpoint(xhci, udev, command,
+ true, true);
+ xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0);
+
+ if (!ret) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ virt_dev->current_mel = max_exit_latency;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ return ret;
+}
+
#ifdef CONFIG_PM_RUNTIME
/* BESL to HIRD Encoding array for USB2 LPM */
@@ -3856,6 +3992,28 @@ static int xhci_calculate_hird_besl(struct xhci_hcd *xhci,
return besl;
}
+/* Calculate BESLD, L1 timeout and HIRDM for USB2 PORTHLPMC */
+static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev)
+{
+ u32 field;
+ int l1;
+ int besld = 0;
+ int hirdm = 0;
+
+ field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+ /* xHCI l1 is set in steps of 256us, xHCI 1.0 section 5.4.11.2 */
+ l1 = udev->l1_params.timeout / 256;
+
+ /* device has preferred BESLD */
+ if (field & USB_BESL_DEEP_VALID) {
+ besld = USB_GET_BESL_DEEP(field);
+ hirdm = 1;
+ }
+
+ return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm);
+}
+
static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
struct usb_device *udev)
{
@@ -3911,7 +4069,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
* Check device's USB 2.0 extension descriptor to determine whether
* HIRD or BESL shoule be used. See USB2.0 LPM errata.
*/
- pm_addr = port_array[port_num] + 1;
+ pm_addr = port_array[port_num] + PORTPMSC;
hird = xhci_calculate_hird_besl(xhci, udev);
temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
xhci_writel(xhci, temp, pm_addr);
@@ -3988,11 +4146,12 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
__le32 __iomem **port_array;
- __le32 __iomem *pm_addr;
- u32 temp;
+ __le32 __iomem *pm_addr, *hlpm_addr;
+ u32 pm_val, hlpm_val, field;
unsigned int port_num;
unsigned long flags;
- int hird;
+ int hird, exit_latency;
+ int ret;
if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support ||
!udev->lpm_capable)
@@ -4009,40 +4168,120 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
port_array = xhci->usb2_ports;
port_num = udev->portnum - 1;
- pm_addr = port_array[port_num] + 1;
- temp = xhci_readl(xhci, pm_addr);
+ pm_addr = port_array[port_num] + PORTPMSC;
+ pm_val = xhci_readl(xhci, pm_addr);
+ hlpm_addr = port_array[port_num] + PORTHLPMC;
+ field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
enable ? "enable" : "disable", port_num);
- hird = xhci_calculate_hird_besl(xhci, udev);
-
if (enable) {
- temp &= ~PORT_HIRD_MASK;
- temp |= PORT_HIRD(hird) | PORT_RWE;
- xhci_writel(xhci, temp, pm_addr);
- temp = xhci_readl(xhci, pm_addr);
- temp |= PORT_HLE;
- xhci_writel(xhci, temp, pm_addr);
+ /* Host supports BESL timeout instead of HIRD */
+ if (udev->usb2_hw_lpm_besl_capable) {
+ /* if device doesn't have a preferred BESL value use a
+ * default one which works with mixed HIRD and BESL
+ * systems. See XHCI_DEFAULT_BESL definition in xhci.h
+ */
+ if ((field & USB_BESL_SUPPORT) &&
+ (field & USB_BESL_BASELINE_VALID))
+ hird = USB_GET_BESL_BASELINE(field);
+ else
+ hird = udev->l1_params.besl;
+
+ exit_latency = xhci_besl_encoding[hird];
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* USB 3.0 code dedicate one xhci->lpm_command->in_ctx
+ * input context for link powermanagement evaluate
+ * context commands. It is protected by hcd->bandwidth
+ * mutex and is shared by all devices. We need to set
+ * the max ext latency in USB 2 BESL LPM as well, so
+ * use the same mutex and xhci_change_max_exit_latency()
+ */
+ mutex_lock(hcd->bandwidth_mutex);
+ ret = xhci_change_max_exit_latency(xhci, udev,
+ exit_latency);
+ mutex_unlock(hcd->bandwidth_mutex);
+
+ if (ret < 0)
+ return ret;
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
+ xhci_writel(xhci, hlpm_val, hlpm_addr);
+ /* flush write */
+ xhci_readl(xhci, hlpm_addr);
+ } else {
+ hird = xhci_calculate_hird_besl(xhci, udev);
+ }
+
+ pm_val &= ~PORT_HIRD_MASK;
+ pm_val |= PORT_HIRD(hird) | PORT_RWE;
+ xhci_writel(xhci, pm_val, pm_addr);
+ pm_val = xhci_readl(xhci, pm_addr);
+ pm_val |= PORT_HLE;
+ xhci_writel(xhci, pm_val, pm_addr);
+ /* flush write */
+ xhci_readl(xhci, pm_addr);
} else {
- temp &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
- xhci_writel(xhci, temp, pm_addr);
+ pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
+ xhci_writel(xhci, pm_val, pm_addr);
+ /* flush write */
+ xhci_readl(xhci, pm_addr);
+ if (udev->usb2_hw_lpm_besl_capable) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ mutex_lock(hcd->bandwidth_mutex);
+ xhci_change_max_exit_latency(xhci, udev, 0);
+ mutex_unlock(hcd->bandwidth_mutex);
+ return 0;
+ }
}
spin_unlock_irqrestore(&xhci->lock, flags);
return 0;
}
+/* check if a usb2 port supports a given extened capability protocol
+ * only USB2 ports extended protocol capability values are cached.
+ * Return 1 if capability is supported
+ */
+static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port,
+ unsigned capability)
+{
+ u32 port_offset, port_count;
+ int i;
+
+ for (i = 0; i < xhci->num_ext_caps; i++) {
+ if (xhci->ext_caps[i] & capability) {
+ /* port offsets starts at 1 */
+ port_offset = XHCI_EXT_PORT_OFF(xhci->ext_caps[i]) - 1;
+ port_count = XHCI_EXT_PORT_COUNT(xhci->ext_caps[i]);
+ if (port >= port_offset &&
+ port < port_offset + port_count)
+ return 1;
+ }
+ }
+ return 0;
+}
+
int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
+ int portnum = udev->portnum - 1;
ret = xhci_usb2_software_lpm_test(hcd, udev);
if (!ret) {
xhci_dbg(xhci, "software LPM test succeed\n");
- if (xhci->hw_lpm_support == 1) {
+ if (xhci->hw_lpm_support == 1 &&
+ xhci_check_usb2_port_capability(xhci, portnum, XHCI_HLC)) {
udev->usb2_hw_lpm_capable = 1;
+ udev->l1_params.timeout = XHCI_L1_TIMEOUT;
+ udev->l1_params.besl = XHCI_DEFAULT_BESL;
+ if (xhci_check_usb2_port_capability(xhci, portnum,
+ XHCI_BLC))
+ udev->usb2_hw_lpm_besl_capable = 1;
ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1);
if (!ret)
udev->usb2_hw_lpm_enabled = 1;
@@ -4373,56 +4612,6 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
return timeout;
}
-/*
- * Issue an Evaluate Context command to change the Maximum Exit Latency in the
- * slot context. If that succeeds, store the new MEL in the xhci_virt_device.
- */
-static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
- struct usb_device *udev, u16 max_exit_latency)
-{
- struct xhci_virt_device *virt_dev;
- struct xhci_command *command;
- struct xhci_input_control_ctx *ctrl_ctx;
- struct xhci_slot_ctx *slot_ctx;
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&xhci->lock, flags);
- if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
- spin_unlock_irqrestore(&xhci->lock, flags);
- return 0;
- }
-
- /* Attempt to issue an Evaluate Context command to change the MEL. */
- virt_dev = xhci->devs[udev->slot_id];
- command = xhci->lpm_command;
- xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
- spin_unlock_irqrestore(&xhci->lock, flags);
-
- ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
- ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
- slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
- slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
- slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
-
- xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n");
- xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, command->in_ctx, 0);
-
- /* Issue and wait for the evaluate context command. */
- ret = xhci_configure_endpoint(xhci, udev, command,
- true, true);
- xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0);
-
- if (!ret) {
- spin_lock_irqsave(&xhci->lock, flags);
- virt_dev->current_mel = max_exit_latency;
- spin_unlock_irqrestore(&xhci->lock, flags);
- }
- return ret;
-}
-
static int calculate_max_exit_latency(struct usb_device *udev,
enum usb3_link_state state_changed,
u16 hub_encoded_timeout)
@@ -4564,6 +4753,13 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
return -ENOMEM;
}
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ xhci_free_command(xhci, config_cmd);
+ return -ENOMEM;
+ }
spin_lock_irqsave(&xhci->lock, flags);
if (hdev->speed == USB_SPEED_HIGH &&
@@ -4575,7 +4771,6 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
}
xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
- ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 77600cefcaf..c338741a675 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -132,6 +132,11 @@ struct xhci_cap_regs {
/* Number of registers per port */
#define NUM_PORT_REGS 4
+#define PORTSC 0
+#define PORTPMSC 1
+#define PORTLI 2
+#define PORTHLPMC 3
+
/**
* struct xhci_op_regs - xHCI Host Controller Operational Registers.
* @command: USBCMD - xHC command register
@@ -381,6 +386,27 @@ struct xhci_op_regs {
#define PORT_L1DS(p) (((p) & 0xff) << 8)
#define PORT_HLE (1 << 16)
+
+/* USB2 Protocol PORTHLPMC */
+#define PORT_HIRDM(p)((p) & 3)
+#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
+#define PORT_BESLD(p)(((p) & 0xf) << 10)
+
+/* use 512 microseconds as USB2 LPM L1 default timeout. */
+#define XHCI_L1_TIMEOUT 512
+
+/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
+ * Safe to use with mixed HIRD and BESL systems (host and device) and is used
+ * by other operating systems.
+ *
+ * XHCI 1.0 errata 8/14/12 Table 13 notes:
+ * "Software should choose xHC BESL/BESLD field values that do not violate a
+ * device's resume latency requirements,
+ * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
+ * or not program values < '4' if BLC = '0' and a BESL device is attached.
+ */
+#define XHCI_DEFAULT_BESL 4
+
/**
* struct xhci_intr_reg - Interrupt Register Set
* @irq_pending: IMAN - Interrupt Management Register. Used to enable
@@ -1532,6 +1558,9 @@ struct xhci_hcd {
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
unsigned hw_lpm_support:1;
+ /* cached usb2 extened protocol capabilites */
+ u32 *ext_caps;
+ unsigned int num_ext_caps;
/* Compliance Mode Recovery Data */
struct timer_list comp_mode_recovery_timer;
u32 port_status_u0;
@@ -1641,6 +1670,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_address(unsigned int ep_index);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
@@ -1745,7 +1775,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
int xhci_get_frame(struct usb_hcd *hcd);
irqreturn_t xhci_irq(struct usb_hcd *hcd);
-irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
+irqreturn_t xhci_msi_irq(int irq, void *hcd);
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 284b8546141..eb3c8c142fa 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#ifdef CONFIG_USB_DEBUG
static int debug = 5;
@@ -35,8 +35,8 @@ static int debug = 1;
/* Use our own dbg macro */
#undef dbg
-#define dbg(lvl, format, arg...) \
-do { \
+#define dbg(lvl, format, arg...) \
+do { \
if (debug >= lvl) \
printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
} while (0)
@@ -58,12 +58,12 @@ MODULE_PARM_DESC(debug, "Debug enabled or not");
/* table of devices that work with this driver */
static const struct usb_device_id device_table[] = {
{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */
- { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */
- { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */
{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */
{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */
{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */
- { }/* Terminating entry */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, device_table);
@@ -92,16 +92,16 @@ MODULE_DEVICE_TABLE(usb, device_table);
/* Structure to hold all of our device specific stuff */
struct adu_device {
struct mutex mtx;
- struct usb_device* udev; /* save off the usb device pointer */
- struct usb_interface* interface;
+ struct usb_device *udev; /* save off the usb device pointer */
+ struct usb_interface *interface;
unsigned int minor; /* the starting minor number for this device */
char serial_number[8];
int open_count; /* number of times this port has been opened */
- char* read_buffer_primary;
+ char *read_buffer_primary;
int read_buffer_length;
- char* read_buffer_secondary;
+ char *read_buffer_secondary;
int secondary_head;
int secondary_tail;
spinlock_t buflock;
@@ -109,14 +109,14 @@ struct adu_device {
wait_queue_head_t read_wait;
wait_queue_head_t write_wait;
- char* interrupt_in_buffer;
- struct usb_endpoint_descriptor* interrupt_in_endpoint;
- struct urb* interrupt_in_urb;
+ char *interrupt_in_buffer;
+ struct usb_endpoint_descriptor *interrupt_in_endpoint;
+ struct urb *interrupt_in_urb;
int read_urb_finished;
- char* interrupt_out_buffer;
- struct usb_endpoint_descriptor* interrupt_out_endpoint;
- struct urb* interrupt_out_urb;
+ char *interrupt_out_buffer;
+ struct usb_endpoint_descriptor *interrupt_out_endpoint;
+ struct urb *interrupt_out_urb;
int out_urb_finished;
};
@@ -147,10 +147,10 @@ static void adu_abort_transfers(struct adu_device *dev)
{
unsigned long flags;
- dbg(2," %s : enter", __func__);
+ dbg(2, " %s : enter", __func__);
if (dev->udev == NULL) {
- dbg(1," %s : udev is null", __func__);
+ dbg(1, " %s : udev is null", __func__);
goto exit;
}
@@ -172,7 +172,7 @@ static void adu_abort_transfers(struct adu_device *dev)
spin_unlock_irqrestore(&dev->buflock, flags);
exit:
- dbg(2," %s : leave", __func__);
+ dbg(2, " %s : leave", __func__);
}
static void adu_delete(struct adu_device *dev)
@@ -196,7 +196,7 @@ static void adu_interrupt_in_callback(struct urb *urb)
struct adu_device *dev = urb->context;
int status = urb->status;
- dbg(4," %s : enter, status %d", __func__, status);
+ dbg(4, " %s : enter, status %d", __func__, status);
adu_debug_data(5, __func__, urb->actual_length,
urb->transfer_buffer);
@@ -205,7 +205,7 @@ static void adu_interrupt_in_callback(struct urb *urb)
if (status != 0) {
if ((status != -ENOENT) && (status != -ECONNRESET) &&
(status != -ESHUTDOWN)) {
- dbg(1," %s : nonzero status received: %d",
+ dbg(1, " %s : nonzero status received: %d",
__func__, status);
}
goto exit;
@@ -220,10 +220,10 @@ static void adu_interrupt_in_callback(struct urb *urb)
dev->interrupt_in_buffer, urb->actual_length);
dev->read_buffer_length += urb->actual_length;
- dbg(2," %s reading %d ", __func__,
+ dbg(2, " %s reading %d ", __func__,
urb->actual_length);
} else {
- dbg(1," %s : read_buffer overflow", __func__);
+ dbg(1, " %s : read_buffer overflow", __func__);
}
}
@@ -234,7 +234,7 @@ exit:
wake_up_interruptible(&dev->read_wait);
adu_debug_data(5, __func__, urb->actual_length,
urb->transfer_buffer);
- dbg(4," %s : leave, status %d", __func__, status);
+ dbg(4, " %s : leave, status %d", __func__, status);
}
static void adu_interrupt_out_callback(struct urb *urb)
@@ -242,8 +242,8 @@ static void adu_interrupt_out_callback(struct urb *urb)
struct adu_device *dev = urb->context;
int status = urb->status;
- dbg(4," %s : enter, status %d", __func__, status);
- adu_debug_data(5,__func__, urb->actual_length, urb->transfer_buffer);
+ dbg(4, " %s : enter, status %d", __func__, status);
+ adu_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
if (status != 0) {
if ((status != -ENOENT) &&
@@ -262,7 +262,7 @@ exit:
adu_debug_data(5, __func__, urb->actual_length,
urb->transfer_buffer);
- dbg(4," %s : leave, status %d", __func__, status);
+ dbg(4, " %s : leave, status %d", __func__, status);
}
static int adu_open(struct inode *inode, struct file *file)
@@ -272,11 +272,12 @@ static int adu_open(struct inode *inode, struct file *file)
int subminor;
int retval;
- dbg(2,"%s : enter", __func__);
+ dbg(2, "%s : enter", __func__);
subminor = iminor(inode);
- if ((retval = mutex_lock_interruptible(&adutux_mutex))) {
+ retval = mutex_lock_interruptible(&adutux_mutex);
+ if (retval) {
dbg(2, "%s : mutex lock failed", __func__);
goto exit_no_lock;
}
@@ -302,7 +303,7 @@ static int adu_open(struct inode *inode, struct file *file)
}
++dev->open_count;
- dbg(2,"%s : open count %d", __func__, dev->open_count);
+ dbg(2, "%s : open count %d", __func__, dev->open_count);
/* save device in the file's private structure */
file->private_data = dev;
@@ -311,7 +312,7 @@ static int adu_open(struct inode *inode, struct file *file)
dev->read_buffer_length = 0;
/* fixup first read by having urb waiting for it */
- usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
usb_rcvintpipe(dev->udev,
dev->interrupt_in_endpoint->bEndpointAddress),
dev->interrupt_in_buffer,
@@ -332,23 +333,23 @@ static int adu_open(struct inode *inode, struct file *file)
exit_no_device:
mutex_unlock(&adutux_mutex);
exit_no_lock:
- dbg(2,"%s : leave, return value %d ", __func__, retval);
+ dbg(2, "%s : leave, return value %d ", __func__, retval);
return retval;
}
static void adu_release_internal(struct adu_device *dev)
{
- dbg(2," %s : enter", __func__);
+ dbg(2, " %s : enter", __func__);
/* decrement our usage count for the device */
--dev->open_count;
- dbg(2," %s : open count %d", __func__, dev->open_count);
+ dbg(2, " %s : open count %d", __func__, dev->open_count);
if (dev->open_count <= 0) {
adu_abort_transfers(dev);
dev->open_count = 0;
}
- dbg(2," %s : leave", __func__);
+ dbg(2, " %s : leave", __func__);
}
static int adu_release(struct inode *inode, struct file *file)
@@ -356,17 +357,17 @@ static int adu_release(struct inode *inode, struct file *file)
struct adu_device *dev;
int retval = 0;
- dbg(2," %s : enter", __func__);
+ dbg(2, " %s : enter", __func__);
if (file == NULL) {
- dbg(1," %s : file is NULL", __func__);
+ dbg(1, " %s : file is NULL", __func__);
retval = -ENODEV;
goto exit;
}
dev = file->private_data;
if (dev == NULL) {
- dbg(1," %s : object is NULL", __func__);
+ dbg(1, " %s : object is NULL", __func__);
retval = -ENODEV;
goto exit;
}
@@ -374,7 +375,7 @@ static int adu_release(struct inode *inode, struct file *file)
mutex_lock(&adutux_mutex); /* not interruptible */
if (dev->open_count <= 0) {
- dbg(1," %s : device not opened", __func__);
+ dbg(1, " %s : device not opened", __func__);
retval = -ENODEV;
goto unlock;
}
@@ -388,7 +389,7 @@ static int adu_release(struct inode *inode, struct file *file)
unlock:
mutex_unlock(&adutux_mutex);
exit:
- dbg(2," %s : leave, return value %d", __func__, retval);
+ dbg(2, " %s : leave, return value %d", __func__, retval);
return retval;
}
@@ -405,10 +406,10 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
unsigned long flags;
DECLARE_WAITQUEUE(wait, current);
- dbg(2," %s : enter, count = %Zd, file=%p", __func__, count, file);
+ dbg(2, " %s : enter, count = %Zd, file=%p", __func__, count, file);
dev = file->private_data;
- dbg(2," %s : dev=%p", __func__, dev);
+ dbg(2, " %s : dev=%p", __func__, dev);
if (mutex_lock_interruptible(&dev->mtx))
return -ERESTARTSYS;
@@ -423,15 +424,15 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
/* verify that some data was requested */
if (count == 0) {
- dbg(1," %s : read request of 0 bytes", __func__);
+ dbg(1, " %s : read request of 0 bytes", __func__);
goto exit;
}
timeout = COMMAND_TIMEOUT;
- dbg(2," %s : about to start looping", __func__);
+ dbg(2, " %s : about to start looping", __func__);
while (bytes_to_read) {
int data_in_secondary = dev->secondary_tail - dev->secondary_head;
- dbg(2," %s : while, data_in_secondary=%d, status=%d",
+ dbg(2, " %s : while, data_in_secondary=%d, status=%d",
__func__, data_in_secondary,
dev->interrupt_in_urb->status);
@@ -456,7 +457,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
if (dev->read_buffer_length) {
/* we secure access to the primary */
char *tmp;
- dbg(2," %s : swap, read_buffer_length = %d",
+ dbg(2, " %s : swap, read_buffer_length = %d",
__func__, dev->read_buffer_length);
tmp = dev->read_buffer_secondary;
dev->read_buffer_secondary = dev->read_buffer_primary;
@@ -472,16 +473,16 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
if (!dev->read_urb_finished) {
/* somebody is doing IO */
spin_unlock_irqrestore(&dev->buflock, flags);
- dbg(2," %s : submitted already", __func__);
+ dbg(2, " %s : submitted already", __func__);
} else {
/* we must initiate input */
- dbg(2," %s : initiate input", __func__);
+ dbg(2, " %s : initiate input", __func__);
dev->read_urb_finished = 0;
spin_unlock_irqrestore(&dev->buflock, flags);
- usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
- usb_rcvintpipe(dev->udev,
- dev->interrupt_in_endpoint->bEndpointAddress),
+ usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
dev->interrupt_in_buffer,
usb_endpoint_maxp(dev->interrupt_in_endpoint),
adu_interrupt_in_callback,
@@ -493,7 +494,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
if (retval == -ENOMEM) {
retval = bytes_read ? bytes_read : -ENOMEM;
}
- dbg(2," %s : submit failed", __func__);
+ dbg(2, " %s : submit failed", __func__);
goto exit;
}
}
@@ -512,13 +513,13 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
remove_wait_queue(&dev->read_wait, &wait);
if (timeout <= 0) {
- dbg(2," %s : timeout", __func__);
+ dbg(2, " %s : timeout", __func__);
retval = bytes_read ? bytes_read : -ETIMEDOUT;
goto exit;
}
if (signal_pending(current)) {
- dbg(2," %s : signal pending", __func__);
+ dbg(2, " %s : signal pending", __func__);
retval = bytes_read ? bytes_read : -EINTR;
goto exit;
}
@@ -532,9 +533,9 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
if (should_submit && dev->read_urb_finished) {
dev->read_urb_finished = 0;
spin_unlock_irqrestore(&dev->buflock, flags);
- usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
usb_rcvintpipe(dev->udev,
- dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_endpoint->bEndpointAddress),
dev->interrupt_in_buffer,
usb_endpoint_maxp(dev->interrupt_in_endpoint),
adu_interrupt_in_callback,
@@ -551,7 +552,7 @@ exit:
/* unlock the device */
mutex_unlock(&dev->mtx);
- dbg(2," %s : leave, return value %d", __func__, retval);
+ dbg(2, " %s : leave, return value %d", __func__, retval);
return retval;
}
@@ -566,7 +567,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
unsigned long flags;
int retval;
- dbg(2," %s : enter, count = %Zd", __func__, count);
+ dbg(2, " %s : enter, count = %Zd", __func__, count);
dev = file->private_data;
@@ -584,7 +585,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
/* verify that we actually have some data to write */
if (count == 0) {
- dbg(1," %s : write request of 0 bytes", __func__);
+ dbg(1, " %s : write request of 0 bytes", __func__);
goto exit;
}
@@ -597,7 +598,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
mutex_unlock(&dev->mtx);
if (signal_pending(current)) {
- dbg(1," %s : interrupted", __func__);
+ dbg(1, " %s : interrupted", __func__);
set_current_state(TASK_RUNNING);
retval = -EINTR;
goto exit_onqueue;
@@ -614,17 +615,17 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
goto exit_nolock;
}
- dbg(4," %s : in progress, count = %Zd", __func__, count);
+ dbg(4, " %s : in progress, count = %Zd", __func__, count);
} else {
spin_unlock_irqrestore(&dev->buflock, flags);
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->write_wait, &waita);
- dbg(4," %s : sending, count = %Zd", __func__, count);
+ dbg(4, " %s : sending, count = %Zd", __func__, count);
/* write the data into interrupt_out_buffer from userspace */
buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
bytes_to_write = count > buffer_size ? buffer_size : count;
- dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
+ dbg(4, " %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
__func__, buffer_size, count, bytes_to_write);
if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
@@ -664,7 +665,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
exit:
mutex_unlock(&dev->mtx);
exit_nolock:
- dbg(2," %s : leave, return value %d", __func__, retval);
+ dbg(2, " %s : leave, return value %d", __func__, retval);
return retval;
exit_onqueue:
@@ -710,7 +711,7 @@ static int adu_probe(struct usb_interface *interface,
int out_end_size;
int i;
- dbg(2," %s : enter", __func__);
+ dbg(2, " %s : enter", __func__);
if (udev == NULL) {
dev_err(&interface->dev, "udev is NULL.\n");
@@ -811,7 +812,7 @@ static int adu_probe(struct usb_interface *interface,
dev_err(&interface->dev, "Could not retrieve serial number\n");
goto error;
}
- dbg(2," %s : serial_number=%s", __func__, dev->serial_number);
+ dbg(2, " %s : serial_number=%s", __func__, dev->serial_number);
/* we can register the device now, as it is ready */
usb_set_intfdata(interface, dev);
@@ -832,7 +833,7 @@ static int adu_probe(struct usb_interface *interface,
udev->descriptor.idProduct, dev->serial_number,
(dev->minor - ADU_MINOR_BASE));
exit:
- dbg(2," %s : leave, return value %p (dev)", __func__, dev);
+ dbg(2, " %s : leave, return value %p (dev)", __func__, dev);
return retval;
@@ -851,7 +852,7 @@ static void adu_disconnect(struct usb_interface *interface)
struct adu_device *dev;
int minor;
- dbg(2," %s : enter", __func__);
+ dbg(2, " %s : enter", __func__);
dev = usb_get_intfdata(interface);
@@ -865,7 +866,7 @@ static void adu_disconnect(struct usb_interface *interface)
usb_set_intfdata(interface, NULL);
/* if the device is not opened, then we clean up right now */
- dbg(2," %s : open count %d", __func__, dev->open_count);
+ dbg(2, " %s : open count %d", __func__, dev->open_count);
if (!dev->open_count)
adu_delete(dev);
@@ -874,7 +875,7 @@ static void adu_disconnect(struct usb_interface *interface)
dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
(minor - ADU_MINOR_BASE));
- dbg(2," %s : leave", __func__);
+ dbg(2, " %s : leave", __func__);
}
/* usb specific object needed to register this driver with the usb subsystem */
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index d3a1cce1bf9..c3578393dde 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -42,9 +42,6 @@
#define USB3503_NRD 0x09
#define USB3503_PDS 0x0a
-#define USB3503_PORT1 (1 << 1)
-#define USB3503_PORT2 (1 << 2)
-#define USB3503_PORT3 (1 << 3)
#define USB3503_SP_ILOCK 0xe7
#define USB3503_SPILOCK_CONNECT (1 << 1)
@@ -56,6 +53,7 @@
struct usb3503 {
enum usb3503_mode mode;
struct i2c_client *client;
+ u8 port_off_mask;
int gpio_intn;
int gpio_reset;
int gpio_connect;
@@ -107,11 +105,9 @@ static int usb3503_reset(int gpio_reset, int state)
if (gpio_is_valid(gpio_reset))
gpio_set_value(gpio_reset, state);
- /* Wait RefClk when RESET_N is released, otherwise Hub will
- * not transition to Hub Communication Stage.
- */
+ /* Wait T_HUBINIT == 4ms for hub logic to stabilize */
if (state)
- msleep(100);
+ usleep_range(4000, 10000);
return 0;
}
@@ -134,12 +130,14 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
goto err_hubmode;
}
- /* PDS : Port2,3 Disable For Self Powered Operation */
- err = usb3503_set_bits(i2c, USB3503_PDS,
- (USB3503_PORT2 | USB3503_PORT3));
- if (err < 0) {
- dev_err(&i2c->dev, "PDS failed (%d)\n", err);
- goto err_hubmode;
+ /* PDS : Disable For Self Powered Operation */
+ if (hub->port_off_mask) {
+ err = usb3503_set_bits(i2c, USB3503_PDS,
+ hub->port_off_mask);
+ if (err < 0) {
+ dev_err(&i2c->dev, "PDS failed (%d)\n", err);
+ goto err_hubmode;
+ }
}
/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
@@ -186,6 +184,8 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
struct usb3503 *hub;
int err = -ENOMEM;
u32 mode = USB3503_MODE_UNKNOWN;
+ const u32 *property;
+ int len;
hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL);
if (!hub) {
@@ -197,18 +197,31 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
hub->client = i2c;
if (pdata) {
+ hub->port_off_mask = pdata->port_off_mask;
hub->gpio_intn = pdata->gpio_intn;
hub->gpio_connect = pdata->gpio_connect;
hub->gpio_reset = pdata->gpio_reset;
hub->mode = pdata->initial_mode;
} else if (np) {
+ hub->port_off_mask = 0;
+
+ property = of_get_property(np, "disabled-ports", &len);
+ if (property && (len / sizeof(u32)) > 0) {
+ int i;
+ for (i = 0; i < len / sizeof(u32); i++) {
+ u32 port = be32_to_cpu(property[i]);
+ if ((1 <= port) && (port <= 3))
+ hub->port_off_mask |= (1 << port);
+ }
+ }
+
hub->gpio_intn = of_get_named_gpio(np, "connect-gpios", 0);
if (hub->gpio_intn == -EPROBE_DEFER)
return -EPROBE_DEFER;
hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0);
if (hub->gpio_connect == -EPROBE_DEFER)
return -EPROBE_DEFER;
- hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
+ hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
if (hub->gpio_reset == -EPROBE_DEFER)
return -EPROBE_DEFER;
of_property_read_u32(np, "initial-mode", &mode);
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 06f8d29af1e..797e3fd4551 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -28,6 +28,35 @@ config USB_MUSB_HDRC
if USB_MUSB_HDRC
choice
+ bool "MUSB Mode Selection"
+ default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
+ default USB_MUSB_HOST if (USB && !USB_GADGET)
+ default USB_MUSB_GADGET if (!USB && USB_GADGET)
+
+config USB_MUSB_HOST
+ bool "Host only mode"
+ depends on USB
+ help
+ Select this when you want to use MUSB in host mode only,
+ thereby the gadget feature will be regressed.
+
+config USB_MUSB_GADGET
+ bool "Gadget only mode"
+ depends on USB_GADGET
+ help
+ Select this when you want to use MUSB in gadget mode only,
+ thereby the host feature will be regressed.
+
+config USB_MUSB_DUAL_ROLE
+ bool "Dual Role mode"
+ depends on (USB && USB_GADGET)
+ help
+ This is the default mode of working of MUSB controller where
+ both host and gadget features are enabled.
+
+endchoice
+
+choice
prompt "Platform Glue Layer"
config USB_MUSB_DAVINCI
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 3b858715b5e..2b82ed7c85c 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -6,8 +6,8 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
musb_hdrc-y := musb_core.o
-musb_hdrc-y += musb_gadget_ep0.o musb_gadget.o
-musb_hdrc-y += musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o
musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o
# Hardware Glue Layer
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 5e63b160db0..6ba8439bd5a 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -450,6 +450,7 @@ static u64 bfin_dmamask = DMA_BIT_MASK(32);
static int bfin_probe(struct platform_device *pdev)
{
+ struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct bfin_glue *glue;
@@ -479,8 +480,21 @@ static int bfin_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ ret = platform_device_add_resources(musb, musb_resources,
+ ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err3;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index b903b744a22..0da6f648a9f 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -476,6 +476,7 @@ static u64 da8xx_dmamask = DMA_BIT_MASK(32);
static int da8xx_probe(struct platform_device *pdev)
{
+ struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct da8xx_glue *glue;
@@ -521,8 +522,21 @@ static int da8xx_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ ret = platform_device_add_resources(musb, musb_resources,
+ ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err5;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index bea6cc35471..f8aeaf2e2cd 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -509,6 +509,7 @@ static u64 davinci_dmamask = DMA_BIT_MASK(32);
static int davinci_probe(struct platform_device *pdev)
{
+ struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct davinci_glue *glue;
@@ -553,8 +554,21 @@ static int davinci_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ ret = platform_device_add_resources(musb, musb_resources,
+ ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err5;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 37a261a6bb6..29a24ced674 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -380,7 +380,6 @@ static void musb_otg_timer_func(unsigned long data)
dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
usb_otg_state_string(musb->xceiv->state));
}
- musb->ignore_disconnect = 0;
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -389,7 +388,7 @@ static void musb_otg_timer_func(unsigned long data)
*/
void musb_hnp_stop(struct musb *musb)
{
- struct usb_hcd *hcd = musb_to_hcd(musb);
+ struct usb_hcd *hcd = musb->hcd;
void __iomem *mbase = musb->mregs;
u8 reg;
@@ -404,7 +403,8 @@ void musb_hnp_stop(struct musb *musb)
break;
case OTG_STATE_B_HOST:
dev_dbg(musb->controller, "HNP: Disabling HR\n");
- hcd->self.is_b_host = 0;
+ if (hcd)
+ hcd->self.is_b_host = 0;
musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
reg = musb_readb(mbase, MUSB_POWER);
@@ -484,7 +484,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb->xceiv->state = OTG_STATE_A_HOST;
musb->is_active = 1;
- usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_host_resume_root_hub(musb);
break;
case OTG_STATE_B_WAIT_ACON:
musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
@@ -501,7 +501,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
case OTG_STATE_A_SUSPEND:
/* possibly DISCONNECT is upcoming */
musb->xceiv->state = OTG_STATE_A_HOST;
- usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_host_resume_root_hub(musb);
break;
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_PERIPHERAL:
@@ -643,7 +643,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
* undesired detour through A_WAIT_BCON.
*/
musb_hnp_stop(musb);
- usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_host_resume_root_hub(musb);
musb_root_disconnect(musb);
musb_platform_try_idle(musb, jiffies
+ msecs_to_jiffies(musb->a_wait_bcon
@@ -685,7 +685,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
if (int_usb & MUSB_INTR_CONNECT) {
- struct usb_hcd *hcd = musb_to_hcd(musb);
+ struct usb_hcd *hcd = musb->hcd;
handled = IRQ_HANDLED;
musb->is_active = 1;
@@ -726,31 +726,27 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
b_host:
musb->xceiv->state = OTG_STATE_B_HOST;
- hcd->self.is_b_host = 1;
- musb->ignore_disconnect = 0;
+ if (musb->hcd)
+ musb->hcd->self.is_b_host = 1;
del_timer(&musb->otg_timer);
break;
default:
if ((devctl & MUSB_DEVCTL_VBUS)
== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
musb->xceiv->state = OTG_STATE_A_HOST;
- hcd->self.is_b_host = 0;
+ if (hcd)
+ hcd->self.is_b_host = 0;
}
break;
}
- /* poke the root hub */
- MUSB_HST_MODE(musb);
- if (hcd->status_urb)
- usb_hcd_poll_rh_status(hcd);
- else
- usb_hcd_resume_root_hub(hcd);
+ musb_host_poke_root_hub(musb);
dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
usb_otg_state_string(musb->xceiv->state), devctl);
}
- if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+ if (int_usb & MUSB_INTR_DISCONNECT) {
dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
usb_otg_state_string(musb->xceiv->state),
MUSB_MODE(musb), devctl);
@@ -759,7 +755,7 @@ b_host:
switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
- usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_host_resume_root_hub(musb);
musb_root_disconnect(musb);
if (musb->a_wait_bcon != 0)
musb_platform_try_idle(musb, jiffies
@@ -772,7 +768,8 @@ b_host:
* in hnp_stop() is currently not used...
*/
musb_root_disconnect(musb);
- musb_to_hcd(musb)->self.is_b_host = 0;
+ if (musb->hcd)
+ musb->hcd->self.is_b_host = 0;
musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
musb_g_disconnect(musb);
@@ -818,11 +815,6 @@ b_host:
usb_otg_state_string(musb->xceiv->state));
switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
- /* We need to ignore disconnect on suspend
- * otherwise tusb 2.0 won't reconnect after a
- * power cycle, which breaks otg compliance.
- */
- musb->ignore_disconnect = 1;
musb_g_reset(musb);
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
@@ -834,7 +826,6 @@ b_host:
+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
break;
case OTG_STATE_A_PERIPHERAL:
- musb->ignore_disconnect = 0;
del_timer(&musb->otg_timer);
musb_g_reset(musb);
break;
@@ -909,51 +900,6 @@ b_host:
/*-------------------------------------------------------------------------*/
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-void musb_start(struct musb *musb)
-{
- void __iomem *regs = musb->mregs;
- u8 devctl = musb_readb(regs, MUSB_DEVCTL);
-
- dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
- /* Set INT enable registers, enable interrupts */
- musb->intrtxe = musb->epmask;
- musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
- musb->intrrxe = musb->epmask & 0xfffe;
- musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
- musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
- musb_writeb(regs, MUSB_TESTMODE, 0);
-
- /* put into basic highspeed mode and start session */
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
-
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
- devctl &= ~MUSB_DEVCTL_SESSION;
-
- /* session started after:
- * (a) ID-grounded irq, host mode;
- * (b) vbus present/connect IRQ, peripheral mode;
- * (c) peripheral initiates, using SRP
- */
- if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
- musb->is_active = 1;
- else
- devctl |= MUSB_DEVCTL_SESSION;
-
- musb_platform_enable(musb);
- musb_writeb(regs, MUSB_DEVCTL, devctl);
-}
-
-
static void musb_generic_disable(struct musb *musb)
{
void __iomem *mbase = musb->mregs;
@@ -1007,6 +953,7 @@ static void musb_shutdown(struct platform_device *pdev)
pm_runtime_get_sync(musb->controller);
+ musb_host_cleanup(musb);
musb_gadget_cleanup(musb);
spin_lock_irqsave(&musb->lock, flags);
@@ -1763,24 +1710,18 @@ static struct musb *allocate_instance(struct device *dev,
struct musb *musb;
struct musb_hw_ep *ep;
int epnum;
- struct usb_hcd *hcd;
+ int ret;
- hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
- if (!hcd)
+ musb = devm_kzalloc(dev, sizeof(*musb), GFP_KERNEL);
+ if (!musb)
return NULL;
- /* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
- musb = hcd_to_musb(hcd);
INIT_LIST_HEAD(&musb->control);
INIT_LIST_HEAD(&musb->in_bulk);
INIT_LIST_HEAD(&musb->out_bulk);
- hcd->uses_new_polling = 1;
- hcd->has_tt = 1;
-
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
- dev_set_drvdata(dev, musb);
musb->mregs = mbase;
musb->ctrl_base = mbase;
musb->nIrq = -ENODEV;
@@ -1795,7 +1736,16 @@ static struct musb *allocate_instance(struct device *dev,
musb->controller = dev;
+ ret = musb_host_alloc(musb);
+ if (ret < 0)
+ goto err_free;
+
+ dev_set_drvdata(dev, musb);
+
return musb;
+
+err_free:
+ return NULL;
}
static void musb_free(struct musb *musb)
@@ -1821,7 +1771,7 @@ static void musb_free(struct musb *musb)
dma_controller_destroy(c);
}
- usb_put_hcd(musb_to_hcd(musb));
+ musb_host_free(musb);
}
/*
@@ -1838,7 +1788,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
int status;
struct musb *musb;
struct musb_hdrc_platform_data *plat = dev->platform_data;
- struct usb_hcd *hcd;
/* The driver might handle more features than the board; OK.
* Fail when the board needs a feature that's not enabled.
@@ -1864,6 +1813,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->board_set_power = plat->set_power;
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
+ musb->port_mode = plat->mode;
/* The musb_platform_init() call:
* - adjusts musb->mregs
@@ -1939,13 +1889,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->irq_wake = 0;
}
- /* host side needs more setup */
- hcd = musb_to_hcd(musb);
- otg_set_host(musb->xceiv->otg, &hcd->self);
- hcd->self.otg_port = 1;
- musb->xceiv->otg->host = &hcd->self;
- hcd->power_budget = 2 * (plat->power ? : 250);
-
/* program PHY to use external vBus if required */
if (plat->extvbus) {
u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
@@ -1961,7 +1904,23 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->xceiv->state = OTG_STATE_B_IDLE;
}
- status = musb_gadget_setup(musb);
+ switch (musb->port_mode) {
+ case MUSB_PORT_MODE_HOST:
+ status = musb_host_setup(musb, plat->power);
+ break;
+ case MUSB_PORT_MODE_GADGET:
+ status = musb_gadget_setup(musb);
+ break;
+ case MUSB_PORT_MODE_DUAL_ROLE:
+ status = musb_host_setup(musb, plat->power);
+ if (status < 0)
+ goto fail3;
+ status = musb_gadget_setup(musb);
+ break;
+ default:
+ dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
+ break;
+ }
if (status < 0)
goto fail3;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 7fb4819a6f1..7d341c387ea 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -77,28 +77,17 @@ struct musb_ep;
#define is_peripheral_active(m) (!(m)->is_host)
#define is_host_active(m) ((m)->is_host)
+enum {
+ MUSB_PORT_MODE_HOST = 1,
+ MUSB_PORT_MODE_GADGET,
+ MUSB_PORT_MODE_DUAL_ROLE,
+};
+
#ifdef CONFIG_PROC_FS
#include <linux/fs.h>
#define MUSB_CONFIG_PROC_FS
#endif
-/****************************** PERIPHERAL ROLE *****************************/
-
-extern irqreturn_t musb_g_ep0_irq(struct musb *);
-extern void musb_g_tx(struct musb *, u8);
-extern void musb_g_rx(struct musb *, u8);
-extern void musb_g_reset(struct musb *);
-extern void musb_g_suspend(struct musb *);
-extern void musb_g_resume(struct musb *);
-extern void musb_g_wakeup(struct musb *);
-extern void musb_g_disconnect(struct musb *);
-
-/****************************** HOST ROLE ***********************************/
-
-extern irqreturn_t musb_h_ep0_irq(struct musb *);
-extern void musb_host_tx(struct musb *, u8);
-extern void musb_host_rx(struct musb *, u8);
-
/****************************** CONSTANTS ********************************/
#ifndef MUSB_C_NUM_EPS
@@ -373,6 +362,7 @@ struct musb {
u8 min_power; /* vbus for periph, in mA/2 */
+ int port_mode; /* MUSB_PORT_MODE_* */
bool is_host;
int a_wait_bcon; /* VBUS timeout in msecs */
@@ -382,7 +372,6 @@ struct musb {
unsigned is_active:1;
unsigned is_multipoint:1;
- unsigned ignore_disconnect:1; /* during bus resets */
unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
@@ -419,6 +408,7 @@ struct musb {
enum musb_g_ep0_state ep0_state;
struct usb_gadget g; /* the gadget */
struct usb_gadget_driver *gadget_driver; /* its driver */
+ struct usb_hcd *hcd; /* the usb hcd */
/*
* FIXME: Remove this flag.
@@ -520,7 +510,6 @@ static inline void musb_configure_ep0(struct musb *musb)
extern const char musb_driver_name[];
-extern void musb_start(struct musb *musb);
extern void musb_stop(struct musb *musb);
extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ba7092349fa..0414bc19d00 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1820,7 +1820,6 @@ static int musb_gadget_start(struct usb_gadget *g,
{
struct musb *musb = gadget_to_musb(g);
struct usb_otg *otg = musb->xceiv->otg;
- struct usb_hcd *hcd = musb_to_hcd(musb);
unsigned long flags;
int retval = 0;
@@ -1847,17 +1846,9 @@ static int musb_gadget_start(struct usb_gadget *g,
* handles power budgeting ... this way also
* ensures HdrcStart is indirectly called.
*/
- retval = usb_add_hcd(hcd, 0, 0);
- if (retval < 0) {
- dev_dbg(musb->controller, "add_hcd failed, %d\n", retval);
- goto err;
- }
-
if (musb->xceiv->last_event == USB_EVENT_ID)
musb_platform_set_vbus(musb, 1);
- hcd->self.uses_pio_for_control = 1;
-
if (musb->xceiv->last_event == USB_EVENT_NONE)
pm_runtime_put(musb->controller);
@@ -1942,7 +1933,6 @@ static int musb_gadget_stop(struct usb_gadget *g,
musb_platform_try_idle(musb, 0);
spin_unlock_irqrestore(&musb->lock, flags);
- usb_remove_hcd(musb_to_hcd(musb));
/*
* FIXME we need to be able to register another
* gadget driver here and have everything work;
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index 66b7c5e0fb4..0314dfc770c 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -37,6 +37,38 @@
#include <linux/list.h>
+#if IS_ENABLED(CONFIG_USB_MUSB_GADGET) || IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+extern int musb_gadget_setup(struct musb *);
+
+#else
+static inline irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+ return 0;
+}
+
+static inline void musb_g_tx(struct musb *musb, u8 epnum) {}
+static inline void musb_g_rx(struct musb *musb, u8 epnum) {}
+static inline void musb_g_reset(struct musb *musb) {}
+static inline void musb_g_suspend(struct musb *musb) {}
+static inline void musb_g_resume(struct musb *musb) {}
+static inline void musb_g_wakeup(struct musb *musb) {}
+static inline void musb_g_disconnect(struct musb *musb) {}
+static inline void musb_gadget_cleanup(struct musb *musb) {}
+static inline int musb_gadget_setup(struct musb *musb)
+{
+ return 0;
+}
+#endif
+
enum buffer_map_state {
UN_MAPPED = 0,
PRE_MAPPED,
@@ -106,14 +138,8 @@ static inline struct musb_request *next_request(struct musb_ep *ep)
return container_of(queue->next, struct musb_request, list);
}
-extern void musb_g_tx(struct musb *musb, u8 epnum);
-extern void musb_g_rx(struct musb *musb, u8 epnum);
-
extern const struct usb_ep_ops musb_g_ep0_ops;
-extern int musb_gadget_setup(struct musb *);
-extern void musb_gadget_cleanup(struct musb *);
-
extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
extern void musb_ep_restart(struct musb *, struct musb_request *);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9d3044bdebe..a9695f5a92f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -46,7 +46,6 @@
#include "musb_core.h"
#include "musb_host.h"
-
/* MUSB HOST status 22-mar-2006
*
* - There's still lots of partial code duplication for fault paths, so
@@ -96,6 +95,11 @@
* of transfers between endpoints, or anything clever.
*/
+struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+ return *(struct musb **) hcd->hcd_priv;
+}
+
static void musb_ep_program(struct musb *musb, u8 epnum,
struct urb *urb, int is_out,
@@ -269,8 +273,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
*/
- if ((urb->transfer_flags & URB_ISO_ASAP)
- || (frame >= urb->start_frame)) {
+ if (1) { /* Always assume URB_ISO_ASAP */
/* REVISIT the SOF irq handler shouldn't duplicate
* this code; and we don't init urb->start_frame...
*/
@@ -311,9 +314,9 @@ __acquires(musb->lock)
urb->actual_length, urb->transfer_buffer_length
);
- usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+ usb_hcd_unlink_urb_from_ep(musb->hcd, urb);
spin_unlock(&musb->lock);
- usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+ usb_hcd_giveback_urb(musb->hcd, urb, status);
spin_lock(&musb->lock);
}
@@ -625,7 +628,7 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
u16 csr;
u8 mode;
-#ifdef CONFIG_USB_INVENTRA_DMA
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
if (length > channel->max_len)
length = channel->max_len;
@@ -1455,7 +1458,7 @@ done:
if (length > qh->maxpacket)
length = qh->maxpacket;
/* Unmap the buffer so that CPU can use it */
- usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
+ usb_hcd_unmap_urb_for_dma(musb->hcd, urb);
/*
* We need to map sg if the transfer_buffer is
@@ -1657,7 +1660,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* FIXME this is _way_ too much in-line logic for Mentor DMA */
-#ifndef CONFIG_USB_INVENTRA_DMA
+#if !defined(CONFIG_USB_INVENTRA_DMA) && !defined(CONFIG_USB_UX500_DMA)
if (rx_csr & MUSB_RXCSR_H_REQPKT) {
/* REVISIT this happened for a while on some short reads...
* the cleanup still needs investigation... looks bad...
@@ -1689,7 +1692,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
| MUSB_RXCSR_RXPKTRDY);
musb_writew(hw_ep->regs, MUSB_RXCSR, val);
-#ifdef CONFIG_USB_INVENTRA_DMA
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
@@ -1745,7 +1748,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
}
/* we are expecting IN packets */
-#ifdef CONFIG_USB_INVENTRA_DMA
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
if (dma) {
struct dma_controller *c;
u16 rx_count;
@@ -1754,10 +1757,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
rx_count = musb_readw(epio, MUSB_RXCOUNT);
- dev_dbg(musb->controller, "RX%d count %d, buffer 0x%x len %d/%d\n",
+ dev_dbg(musb->controller, "RX%d count %d, buffer 0x%llx len %d/%d\n",
epnum, rx_count,
- urb->transfer_dma
- + urb->actual_length,
+ (unsigned long long) urb->transfer_dma
+ + urb->actual_length,
qh->offset,
urb->transfer_buffer_length);
@@ -1869,7 +1872,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
unsigned int received_len;
/* Unmap the buffer so that CPU can use it */
- usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
+ usb_hcd_unmap_urb_for_dma(musb->hcd, urb);
/*
* We need to map sg if the transfer_buffer is
@@ -2463,7 +2466,6 @@ static int musb_bus_resume(struct usb_hcd *hcd)
return 0;
}
-
#ifndef CONFIG_MUSB_PIO_ONLY
#define MUSB_USB_DMA_ALIGN 4
@@ -2575,10 +2577,10 @@ static void musb_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
}
#endif /* !CONFIG_MUSB_PIO_ONLY */
-const struct hc_driver musb_hc_driver = {
+static const struct hc_driver musb_hc_driver = {
.description = "musb-hcd",
.product_desc = "MUSB HDRC host driver",
- .hcd_priv_size = sizeof(struct musb),
+ .hcd_priv_size = sizeof(struct musb *),
.flags = HCD_USB2 | HCD_MEMORY,
/* not using irq handler or reset hooks from usbcore, since
@@ -2606,3 +2608,66 @@ const struct hc_driver musb_hc_driver = {
/* .start_port_reset = NULL, */
/* .hub_irq_enable = NULL, */
};
+
+int musb_host_alloc(struct musb *musb)
+{
+ struct device *dev = musb->controller;
+
+ /* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+ musb->hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
+ if (!musb->hcd)
+ return -EINVAL;
+
+ *musb->hcd->hcd_priv = (unsigned long) musb;
+ musb->hcd->self.uses_pio_for_control = 1;
+ musb->hcd->uses_new_polling = 1;
+ musb->hcd->has_tt = 1;
+
+ return 0;
+}
+
+void musb_host_cleanup(struct musb *musb)
+{
+ usb_remove_hcd(musb->hcd);
+ musb->hcd = NULL;
+}
+
+void musb_host_free(struct musb *musb)
+{
+ usb_put_hcd(musb->hcd);
+}
+
+int musb_host_setup(struct musb *musb, int power_budget)
+{
+ int ret;
+ struct usb_hcd *hcd = musb->hcd;
+
+ MUSB_HST_MODE(musb);
+ musb->xceiv->otg->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+
+ otg_set_host(musb->xceiv->otg, &hcd->self);
+ hcd->self.otg_port = 1;
+ musb->xceiv->otg->host = &hcd->self;
+ hcd->power_budget = 2 * (power_budget ? : 250);
+
+ ret = usb_add_hcd(hcd, 0, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void musb_host_resume_root_hub(struct musb *musb)
+{
+ usb_hcd_resume_root_hub(musb->hcd);
+}
+
+void musb_host_poke_root_hub(struct musb *musb)
+{
+ MUSB_HST_MODE(musb);
+ if (musb->hcd->status_urb)
+ usb_hcd_poll_rh_status(musb->hcd);
+ else
+ usb_hcd_resume_root_hub(musb->hcd);
+}
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 738f7eb60df..960d73570b2 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -37,16 +37,6 @@
#include <linux/scatterlist.h>
-static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
-{
- return container_of((void *) musb, struct usb_hcd, hcd_priv);
-}
-
-static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
-{
- return (struct musb *) (hcd->hcd_priv);
-}
-
/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
struct musb_qh {
struct usb_host_endpoint *hep; /* usbcore info */
@@ -86,7 +76,52 @@ static inline struct musb_qh *first_qh(struct list_head *q)
}
+#if IS_ENABLED(CONFIG_USB_MUSB_HOST) || IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
+extern struct musb *hcd_to_musb(struct usb_hcd *);
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern int musb_host_alloc(struct musb *);
+extern int musb_host_setup(struct musb *, int);
+extern void musb_host_cleanup(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+extern void musb_root_disconnect(struct musb *musb);
+extern void musb_host_free(struct musb *);
+extern void musb_host_cleanup(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
extern void musb_root_disconnect(struct musb *musb);
+extern void musb_host_resume_root_hub(struct musb *musb);
+extern void musb_host_poke_root_hub(struct musb *musb);
+#else
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+ return NULL;
+}
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+ return 0;
+}
+
+static inline int musb_host_alloc(struct musb *musb)
+{
+ return 0;
+}
+
+static inline int musb_host_setup(struct musb *musb, int power_budget)
+{
+ return 0;
+}
+
+static inline void musb_host_cleanup(struct musb *musb) {}
+static inline void musb_host_free(struct musb *musb) {}
+static inline void musb_host_tx(struct musb *musb, u8 epnum) {}
+static inline void musb_host_rx(struct musb *musb, u8 epnum) {}
+static inline void musb_root_disconnect(struct musb *musb) {}
+static inline void musb_host_resume_root_hub(struct musb *musb) {}
+static inline void musb_host_poll_rh_status(struct musb *musb) {}
+static inline void musb_host_poke_root_hub(struct musb *musb) {}
+#endif
struct usb_hcd;
@@ -95,8 +130,6 @@ extern int musb_hub_control(struct usb_hcd *hcd,
u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
-extern const struct hc_driver musb_hc_driver;
-
static inline struct urb *next_urb(struct musb_qh *qh)
{
struct list_head *queue;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index ef7d11045f5..a523950c2b3 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -44,6 +44,51 @@
#include "musb_core.h"
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+static void musb_start(struct musb *musb)
+{
+ void __iomem *regs = musb->mregs;
+ u8 devctl = musb_readb(regs, MUSB_DEVCTL);
+
+ dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+ /* Set INT enable registers, enable interrupts */
+ musb->intrtxe = musb->epmask;
+ musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+ musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+ devctl &= ~MUSB_DEVCTL_SESSION;
+
+ /* session started after:
+ * (a) ID-grounded irq, host mode;
+ * (b) vbus present/connect IRQ, peripheral mode;
+ * (c) peripheral initiates, using SRP
+ */
+ if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+ (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+ musb->is_active = 1;
+ } else {
+ devctl |= MUSB_DEVCTL_SESSION;
+ }
+
+ musb_platform_enable(musb);
+ musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
static void musb_port_suspend(struct musb *musb, bool do_suspend)
{
@@ -145,7 +190,6 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
msleep(1);
}
- musb->ignore_disconnect = true;
power &= 0xf0;
musb_writeb(mbase, MUSB_POWER,
power | MUSB_POWER_RESET);
@@ -158,8 +202,6 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
musb_writeb(mbase, MUSB_POWER,
power & ~MUSB_POWER_RESET);
- musb->ignore_disconnect = false;
-
power = musb_readb(mbase, MUSB_POWER);
if (power & MUSB_POWER_HSMODE) {
dev_dbg(musb->controller, "high-speed device connected\n");
@@ -170,7 +212,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
musb->port1_status |= USB_PORT_STAT_ENABLE
| (USB_PORT_STAT_C_RESET << 16)
| (USB_PORT_STAT_C_ENABLE << 16);
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
+ usb_hcd_poll_rh_status(musb->hcd);
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
}
@@ -183,7 +225,7 @@ void musb_root_disconnect(struct musb *musb)
musb->port1_status = USB_PORT_STAT_POWER
| (USB_PORT_STAT_C_CONNECTION << 16);
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
+ usb_hcd_poll_rh_status(musb->hcd);
musb->is_active = 0;
switch (musb->xceiv->state) {
@@ -337,7 +379,7 @@ int musb_hub_control(
musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
| MUSB_PORT_STAT_RESUME);
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
+ usb_hcd_poll_rh_status(musb->hcd);
/* NOTE: it might really be A_WAIT_BCON ... */
musb->xceiv->state = OTG_STATE_A_HOST;
}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 628b93fe5cc..4315d351fc7 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -87,7 +87,7 @@ static void musb_do_idle(unsigned long _musb)
musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
| MUSB_PORT_STAT_RESUME);
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
+ usb_hcd_poll_rh_status(musb->hcd);
/* NOTE: it might really be A_WAIT_BCON ... */
musb->xceiv->state = OTG_STATE_A_HOST;
}
@@ -481,6 +481,7 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32);
static int omap2430_probe(struct platform_device *pdev)
{
+ struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct omap_musb_board_data *data;
struct platform_device *musb;
@@ -567,8 +568,21 @@ static int omap2430_probe(struct platform_device *pdev)
INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ ret = platform_device_add_resources(musb, musb_resources,
+ ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err2;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 7369ba33c94..2c06a8969a9 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1156,6 +1156,7 @@ static u64 tusb_dmamask = DMA_BIT_MASK(32);
static int tusb_probe(struct platform_device *pdev)
{
+ struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct tusb6010_glue *glue;
@@ -1185,8 +1186,21 @@ static int tusb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ ret = platform_device_add_resources(musb, musb_resources,
+ ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err3;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 2c80004e0a8..028ff4d07dc 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -189,6 +189,7 @@ static const struct musb_platform_ops ux500_ops = {
static int ux500_probe(struct platform_device *pdev)
{
+ struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct ux500_glue *glue;
@@ -232,8 +233,21 @@ static int ux500_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ ret = platform_device_add_resources(musb, musb_resources,
+ ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err5;
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 33812064114..63e7c8a6b12 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -71,8 +71,7 @@ static void ux500_dma_callback(void *private_data)
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
ux500_channel->channel.status = MUSB_DMA_STATUS_FREE;
- musb_dma_completion(musb, hw_ep->epnum,
- ux500_channel->is_tx);
+ musb_dma_completion(musb, hw_ep->epnum, ux500_channel->is_tx);
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -366,7 +365,8 @@ void dma_controller_destroy(struct dma_controller *c)
kfree(controller);
}
-struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb,
+ void __iomem *base)
{
struct ux500_dma_controller *controller;
struct platform_device *pdev = to_platform_device(musb->controller);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2311b1e4e43..a5a9552c25a 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -92,7 +92,7 @@ config OMAP_USB3
on/off the PHY.
config SAMSUNG_USBPHY
- tristate "Samsung USB PHY Driver"
+ tristate
help
Enable this to support Samsung USB phy helper driver for Samsung SoCs.
This driver provides common interface to interact, for Samsung USB 2.0 PHY
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index a9169cb1e6f..070eca3af18 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_PHY) += phy.o
+obj-$(CONFIG_OF) += of.o
# transceiver drivers, keep the list sorted
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 00000000000..7ea0154da9d
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *const usbphy_modes[] = {
+ [USBPHY_INTERFACE_MODE_UNKNOWN] = "",
+ [USBPHY_INTERFACE_MODE_UTMI] = "utmi",
+ [USBPHY_INTERFACE_MODE_UTMIW] = "utmi_wide",
+ [USBPHY_INTERFACE_MODE_ULPI] = "ulpi",
+ [USBPHY_INTERFACE_MODE_SERIAL] = "serial",
+ [USBPHY_INTERFACE_MODE_HSIC] = "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ const char *phy_type;
+ int err, i;
+
+ err = of_property_read_string(np, "phy_type", &phy_type);
+ if (err < 0)
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+ if (!strcmp(phy_type, usbphy_modes[i]))
+ return i;
+
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index e5eb1b5a04e..087402350b6 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1,10 +1,12 @@
/*
* drivers/usb/otg/ab8500_usb.c
*
- * USB transceiver driver for AB8500 chip
+ * USB transceiver driver for AB8500 family chips
*
- * Copyright (C) 2010 ST-Ericsson AB
+ * Copyright (C) 2010-2013 ST-Ericsson AB
* Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Avinash Kumar <avinash.kumar@stericsson.com>
+ * Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,6 +31,8 @@
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/usb/musb-ux500.h>
@@ -41,21 +45,34 @@
/* Bank AB8500_USB */
#define AB8500_USB_LINE_STAT_REG 0x80
#define AB8505_USB_LINE_STAT_REG 0x94
+#define AB8540_USB_LINK_STAT_REG 0x94
+#define AB9540_USB_LINK_STAT_REG 0x94
+#define AB8540_USB_OTG_CTL_REG 0x87
#define AB8500_USB_PHY_CTRL_REG 0x8A
+#define AB8540_VBUS_CTRL_REG 0x82
/* Bank AB8500_DEVELOPMENT */
#define AB8500_BANK12_ACCESS 0x00
/* Bank AB8500_DEBUG */
+#define AB8540_DEBUG 0x32
#define AB8500_USB_PHY_TUNE1 0x05
#define AB8500_USB_PHY_TUNE2 0x06
#define AB8500_USB_PHY_TUNE3 0x07
+/* Bank AB8500_INTERRUPT */
+#define AB8500_IT_SOURCE2_REG 0x01
+
#define AB8500_BIT_OTG_STAT_ID (1 << 0)
#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+#define AB8500_BIT_SOURCE2_VBUSDET (1 << 7)
+#define AB8540_BIT_OTG_CTL_VBUS_VALID_ENA (1 << 0)
+#define AB8540_BIT_OTG_CTL_ID_HOST_ENA (1 << 1)
+#define AB8540_BIT_OTG_CTL_ID_DEV_ENA (1 << 5)
+#define AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA (1 << 0)
#define AB8500_WD_KICK_DELAY_US 100 /* usec */
#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
@@ -112,6 +129,68 @@ enum ab8505_usb_link_status {
USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505,
};
+enum ab8540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8540 = 0,
+ USB_LINK_STD_HOST_NC_8540,
+ USB_LINK_STD_HOST_C_NS_8540,
+ USB_LINK_STD_HOST_C_S_8540,
+ USB_LINK_CDP_8540,
+ USB_LINK_RESERVED0_8540,
+ USB_LINK_RESERVED1_8540,
+ USB_LINK_DEDICATED_CHG_8540,
+ USB_LINK_ACA_RID_A_8540,
+ USB_LINK_ACA_RID_B_8540,
+ USB_LINK_ACA_RID_C_NM_8540,
+ USB_LINK_RESERVED2_8540,
+ USB_LINK_RESERVED3_8540,
+ USB_LINK_HM_IDGND_8540,
+ USB_LINK_CHARGERPORT_NOT_OK_8540,
+ USB_LINK_CHARGER_DM_HIGH_8540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540,
+ USB_LINK_STD_UPSTREAM_8540,
+ USB_LINK_CHARGER_SE1_8540,
+ USB_LINK_CARKIT_CHGR_1_8540,
+ USB_LINK_CARKIT_CHGR_2_8540,
+ USB_LINK_ACA_DOCK_CHGR_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8540
+};
+
+enum ab9540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_9540 = 0,
+ USB_LINK_STD_HOST_NC_9540,
+ USB_LINK_STD_HOST_C_NS_9540,
+ USB_LINK_STD_HOST_C_S_9540,
+ USB_LINK_CDP_9540,
+ USB_LINK_RESERVED0_9540,
+ USB_LINK_RESERVED1_9540,
+ USB_LINK_DEDICATED_CHG_9540,
+ USB_LINK_ACA_RID_A_9540,
+ USB_LINK_ACA_RID_B_9540,
+ USB_LINK_ACA_RID_C_NM_9540,
+ USB_LINK_RESERVED2_9540,
+ USB_LINK_RESERVED3_9540,
+ USB_LINK_HM_IDGND_9540,
+ USB_LINK_CHARGERPORT_NOT_OK_9540,
+ USB_LINK_CHARGER_DM_HIGH_9540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540,
+ USB_LINK_STD_UPSTREAM_9540,
+ USB_LINK_CHARGER_SE1_9540,
+ USB_LINK_CARKIT_CHGR_1_9540,
+ USB_LINK_CARKIT_CHGR_2_9540,
+ USB_LINK_ACA_DOCK_CHGR_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_9540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_9540
+};
+
enum ab8500_usb_mode {
USB_IDLE = 0,
USB_PERIPHERAL,
@@ -119,13 +198,30 @@ enum ab8500_usb_mode {
USB_DEDICATED_CHG
};
+/* Register USB_LINK_STATUS interrupt */
+#define AB8500_USB_FLAG_USE_LINK_STATUS_IRQ (1 << 0)
+/* Register ID_WAKEUP_F interrupt */
+#define AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ (1 << 1)
+/* Register VBUS_DET_F interrupt */
+#define AB8500_USB_FLAG_USE_VBUS_DET_IRQ (1 << 2)
+/* Driver is using the ab-iddet driver*/
+#define AB8500_USB_FLAG_USE_AB_IDDET (1 << 3)
+/* Enable setting regulators voltage */
+#define AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE (1 << 4)
+/* Enable the check_vbus_status workaround */
+#define AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS (1 << 5)
+/* Enable the vbus host workaround */
+#define AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK (1 << 6)
+
struct ab8500_usb {
struct usb_phy phy;
struct device *dev;
struct ab8500 *ab8500;
unsigned vbus_draw;
struct work_struct phy_dis_work;
+ struct work_struct vbus_event_work;
enum ab8500_usb_mode mode;
+ struct clk *sysclk;
struct regulator *v_ape;
struct regulator *v_musb;
struct regulator *v_ulpi;
@@ -133,6 +229,8 @@ struct ab8500_usb {
int previous_link_status_state;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_sleep;
+ bool enabled_charging_detection;
+ unsigned int flags;
};
static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
@@ -171,7 +269,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
if (ret)
dev_err(ab->dev, "Failed to enable v-ape\n");
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
if (ab->saved_v_ulpi < 0)
dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
@@ -191,7 +289,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
if (ret)
dev_err(ab->dev, "Failed to enable vddulpivio18\n");
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
volt = regulator_get_voltage(ab->v_ulpi);
if ((volt != 1300000) && (volt != 1350000))
dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
@@ -212,7 +310,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
regulator_disable(ab->v_ulpi);
/* USB is not the only consumer of Vintcore, restore old settings */
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
if (ab->saved_v_ulpi > 0) {
ret = regulator_set_voltage(ab->v_ulpi,
ab->saved_v_ulpi, ab->saved_v_ulpi);
@@ -252,11 +350,23 @@ static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
if (IS_ERR(ab->pinctrl))
dev_err(ab->dev, "could not get/set default pinstate\n");
+ if (clk_prepare_enable(ab->sysclk))
+ dev_err(ab->dev, "can't prepare/enable clock\n");
+
ab8500_usb_regulator_enable(ab);
abx500_mask_and_set_register_interruptible(ab->dev,
AB8500_USB, AB8500_USB_PHY_CTRL_REG,
bit, bit);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK) {
+ if (sel_host)
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_OTG_CTL_REG,
+ AB8540_BIT_OTG_CTL_VBUS_VALID_ENA |
+ AB8540_BIT_OTG_CTL_ID_HOST_ENA |
+ AB8540_BIT_OTG_CTL_ID_DEV_ENA);
+ }
}
static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
@@ -274,6 +384,8 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
/* Needed to disable the phy.*/
ab8500_usb_wd_workaround(ab);
+ clk_disable_unprepare(ab->sysclk);
+
ab8500_usb_regulator_disable(ab);
if (!IS_ERR(ab->pinctrl)) {
@@ -286,7 +398,8 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
dev_err(ab->dev, "could not set pins to sleep state\n");
- /* as USB pins are shared with idddet, release them to allow
+ /*
+ * as USB pins are shared with iddet, release them to allow
* iddet to request them
*/
pinctrl_put(ab->pinctrl);
@@ -298,6 +411,254 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_enable(ab, false)
#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_disable(ab, false)
+static int ab9540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab9540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab9540_usb_link_status_update %d\n", lsts);
+
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_9540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_9540 ||
+ lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_9540 &&
+ (lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_9540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_9540:
+ case USB_LINK_RESERVED0_9540:
+ case USB_LINK_RESERVED1_9540:
+ case USB_LINK_RESERVED2_9540:
+ case USB_LINK_RESERVED3_9540:
+ if (ab->mode == USB_PERIPHERAL)
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected. */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_9540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_9540:
+ case USB_LINK_STD_HOST_C_NS_9540:
+ case USB_LINK_STD_HOST_C_S_9540:
+ case USB_LINK_CDP_9540:
+ if (ab->mode == USB_HOST) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_host_phy_dis(ab);
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_9540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_9540:
+ if (ab->mode == USB_PERIPHERAL) {
+ ab->mode = USB_HOST;
+ ab8500_usb_peri_phy_dis(ab);
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_9540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540:
+ if (!(is_ab9540_2p0_or_earlier(ab->ab8500))) {
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN,
+ &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8540_usb_link_status_update %d\n", lsts);
+
+ if (ab->enabled_charging_detection) {
+ /* Disable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA, 0x00);
+ ab->enabled_charging_detection = false;
+ }
+
+ /*
+ * Spurious link_status interrupts are seen in case of a
+ * disconnection of a device in IDGND and RIDA stage
+ */
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_8540 ||
+ lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8540 &&
+ (lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8540:
+ case USB_LINK_RESERVED0_8540:
+ case USB_LINK_RESERVED1_8540:
+ case USB_LINK_RESERVED2_8540:
+ case USB_LINK_RESERVED3_8540:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /*
+ * Fallback to default B_IDLE as nothing
+ * is connected
+ */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8540:
+ case USB_LINK_STD_HOST_C_NS_8540:
+ case USB_LINK_STD_HOST_C_S_8540:
+ case USB_LINK_CDP_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8540:
+ case USB_LINK_ACA_DOCK_CHGR_8540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540:
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ break;
+
+ default:
+ event = UX500_MUSB_NONE;
+ break;
+ }
+
+ return 0;
+}
+
static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
enum ab8505_usb_link_status lsts)
{
@@ -498,6 +859,20 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab)
AB8500_USB, AB8505_USB_LINE_STAT_REG, &reg);
lsts = (reg >> 3) & 0x1F;
ret = ab8505_usb_link_status_update(ab, lsts);
+ } else if (is_ab8540(ab->ab8500)) {
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab8540_usb_link_status_update(ab, lsts);
+ } else if (is_ab9540(ab->ab8500)) {
+ enum ab9540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB9540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab9540_usb_link_status_update(ab, lsts);
}
return ret;
@@ -553,7 +928,7 @@ static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
{
- struct ab8500_usb *ab = (struct ab8500_usb *) data;
+ struct ab8500_usb *ab = (struct ab8500_usb *)data;
abx500_usb_link_status_update(ab);
@@ -572,6 +947,69 @@ static void ab8500_usb_phy_disable_work(struct work_struct *work)
ab8500_usb_peri_phy_dis(ab);
}
+/* Check if VBUS is set and linkstatus has not detected a cable. */
+static bool ab8500_usb_check_vbus_status(struct ab8500_usb *ab)
+{
+ u8 isource2;
+ u8 reg;
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE2_REG,
+ &isource2);
+
+ /* If Vbus is below 3.6V abort */
+ if (!(isource2 & AB8500_BIT_SOURCE2_VBUSDET))
+ return false;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG,
+ &reg);
+
+ lsts = (reg >> 3) & 0xFF;
+
+ /* Check if linkstatus has detected a cable */
+ if (lsts)
+ return false;
+
+ return true;
+}
+
+/* re-trigger charger detection again with watchdog re-kick. */
+static void ab8500_usb_vbus_turn_on_event_work(struct work_struct *work)
+{
+ struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+ vbus_event_work);
+
+ if (ab->mode != USB_IDLE)
+ return;
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE);
+
+ udelay(100);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE | AB8500_BIT_WD_CTRL_KICK);
+
+ udelay(100);
+
+ /* Disable Main watchdog */
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ 0x0);
+
+ /* Enable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA);
+
+ ab->enabled_charging_detection = true;
+}
+
static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
{
/*
@@ -627,7 +1065,7 @@ static int ab8500_usb_set_peripheral(struct usb_otg *otg,
* is fixed.
*/
- if ((ab->mode != USB_IDLE) && (!gadget)) {
+ if ((ab->mode != USB_IDLE) && !gadget) {
ab->mode = USB_IDLE;
schedule_work(&ab->phy_dis_work);
}
@@ -651,7 +1089,7 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
* is fixed.
*/
- if ((ab->mode != USB_IDLE) && (!host)) {
+ if ((ab->mode != USB_IDLE) && !host) {
ab->mode = USB_IDLE;
schedule_work(&ab->phy_dis_work);
}
@@ -659,6 +1097,33 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
return 0;
}
+static void ab8500_usb_restart_phy(struct ab8500_usb *ab)
+{
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ 0);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ AB8500_BIT_PHY_CTRL_HOST_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ 0);
+}
+
static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
{
int err;
@@ -693,48 +1158,197 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
int err;
int irq;
- irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
- if (irq < 0) {
- dev_err(&pdev->dev, "Link status irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_link_status_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-link-status", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for link status irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
+ irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Link status irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_link_status_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-link-status", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for link status irq\n");
+ return err;
+ }
}
- irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "ID fall irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_disconnect_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-id-fall", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for ID fall irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
+ irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "ID fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-id-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+ return err;
+ }
}
- irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "VBUS fall irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_disconnect_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-vbus-fall", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
+ irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-vbus-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+ return err;
+ }
}
return 0;
}
+static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x01, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+ 0xC8, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+ 0x60, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+ 0xFC, 0x80);
+
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x00, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE1, 0xCC);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
static int ab8500_usb_probe(struct platform_device *pdev)
{
struct ab8500_usb *ab;
@@ -772,6 +1386,33 @@ static int ab8500_usb_probe(struct platform_device *pdev)
otg->set_host = ab8500_usb_set_host;
otg->set_peripheral = ab8500_usb_set_peripheral;
+ if (is_ab8500(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8505(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS |
+ AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab9540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ if (is_ab9540_2p0_or_earlier(ab->ab8500))
+ ab->flags |= AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ;
+ }
+
+ /* Disable regulator voltage setting for AB8500 <= v2.0 */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ ab->flags &= ~AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+
platform_set_drvdata(pdev, ab);
ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
@@ -779,10 +1420,18 @@ static int ab8500_usb_probe(struct platform_device *pdev)
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+ INIT_WORK(&ab->vbus_event_work, ab8500_usb_vbus_turn_on_event_work);
+
err = ab8500_usb_regulator_get(ab);
if (err)
return err;
+ ab->sysclk = devm_clk_get(ab->dev, "sysclk");
+ if (IS_ERR(ab->sysclk)) {
+ dev_err(ab->dev, "Could not get sysclk.\n");
+ return PTR_ERR(ab->sysclk);
+ }
+
err = ab8500_usb_irq_setup(pdev, ab);
if (err < 0)
return err;
@@ -793,85 +1442,33 @@ static int ab8500_usb_probe(struct platform_device *pdev)
return err;
}
- /* Phy tuning values for AB8500 */
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
- /* Enable the PBT/Bank 0x12 access */
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
- if (err < 0)
- dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
- err);
-
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
- err);
-
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
- err);
-
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
- err);
-
- /* Switch to normal mode/disable Bank 0x12 access */
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
- if (err < 0)
- dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
- err);
- }
-
- /* Phy tuning values for AB8505 */
- if (is_ab8505(ab->ab8500)) {
- /* Enable the PBT/Bank 0x12 access */
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
- 0x01, 0x01);
- if (err < 0)
- dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
- err);
-
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
- 0xC8, 0xC8);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
- err);
-
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
- 0x60, 0x60);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
- err);
-
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
- 0xFC, 0x80);
-
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
- err);
-
- /* Switch to normal mode/disable Bank 0x12 access */
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
- 0x00, 0x00);
- if (err < 0)
- dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
- err);
- }
+ if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500))
+ /* Phy tuning values for AB8500 > v2.0 */
+ ab8500_usb_set_ab8500_tuning_values(ab);
+ else if (is_ab8505(ab->ab8500))
+ /* Phy tuning values for AB8505 */
+ ab8500_usb_set_ab8505_tuning_values(ab);
+ else if (is_ab8540(ab->ab8500))
+ /* Phy tuning values for AB8540 */
+ ab8500_usb_set_ab8540_tuning_values(ab);
+ else if (is_ab9540(ab->ab8500))
+ /* Phy tuning values for AB9540 */
+ ab8500_usb_set_ab9540_tuning_values(ab);
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);
+ /*
+ * This is required for usb-link-status to work properly when a
+ * cable is connected at boot time.
+ */
+ ab8500_usb_restart_phy(ab);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS) {
+ if (ab8500_usb_check_vbus_status(ab))
+ schedule_work(&ab->vbus_event_work);
+ }
+
abx500_usb_link_status_update(ab);
dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
@@ -884,6 +1481,7 @@ static int ab8500_usb_remove(struct platform_device *pdev)
struct ab8500_usb *ab = platform_get_drvdata(pdev);
cancel_work_sync(&ab->phy_dis_work);
+ cancel_work_sync(&ab->vbus_event_work);
usb_remove_phy(&ab->phy);
@@ -895,11 +1493,20 @@ static int ab8500_usb_remove(struct platform_device *pdev)
return 0;
}
+static struct platform_device_id ab8500_usb_devtype[] = {
+ { .name = "ab8500-usb", },
+ { .name = "ab8540-usb", },
+ { .name = "ab9540-usb", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, ab8500_usb_devtype);
+
static struct platform_driver ab8500_usb_driver = {
.probe = ab8500_usb_probe,
.remove = ab8500_usb_remove,
+ .id_table = ab8500_usb_devtype,
.driver = {
- .name = "ab8500-usb",
+ .name = "abx5x0-usb",
.owner = THIS_MODULE,
},
};
@@ -916,7 +1523,6 @@ static void __exit ab8500_usb_exit(void)
}
module_exit(ab8500_usb_exit);
-MODULE_ALIAS("platform:ab8500_usb");
MODULE_AUTHOR("ST-Ericsson AB");
-MODULE_DESCRIPTION("AB8500 usb transceiver driver");
+MODULE_DESCRIPTION("AB8500 family usb transceiver driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c
index 638cc5dade3..55445e5d72e 100644
--- a/drivers/usb/phy/phy-nop.c
+++ b/drivers/usb/phy/phy-nop.c
@@ -270,7 +270,7 @@ static struct platform_driver nop_usb_xceiv_driver = {
.driver = {
.name = "nop_usb_xceiv",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(nop_xceiv_dt_ids),
+ .of_match_table = nop_xceiv_dt_ids,
},
};
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index a6e60b1e102..efe6e1464f4 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -27,7 +27,7 @@
#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
-#define NUM_SYS_CLKS 5
+#define NUM_SYS_CLKS 6
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
@@ -62,6 +62,7 @@ enum sys_clk_rate {
CLK_RATE_12MHZ,
CLK_RATE_16MHZ,
CLK_RATE_19MHZ,
+ CLK_RATE_20MHZ,
CLK_RATE_26MHZ,
CLK_RATE_38MHZ
};
@@ -72,6 +73,8 @@ static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
{1172, 8, 4, 20, 65537}, /* 19.2 MHz */
{1250, 12, 4, 20, 0}, /* 26 MHz */
{3125, 47, 4, 20, 92843}, /* 38.4 MHz */
+ {1000, 7, 4, 10, 0}, /* 20 MHz */
+
};
static int omap_usb3_suspend(struct usb_phy *x, int suspend)
@@ -122,6 +125,8 @@ static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate)
return CLK_RATE_16MHZ;
case 19200000:
return CLK_RATE_19MHZ;
+ case 20000000:
+ return CLK_RATE_20MHZ;
case 26000000:
return CLK_RATE_26MHZ;
case 38400000:
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index a35681b0c50..23c3dd30b2f 100644
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -161,7 +161,7 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
* CAUTION
*
* Because this phy address is also mapped under OHCI/EHCI address area,
- * this driver can't use devm_request_and_ioremap(dev, res) here
+ * this driver can't use devm_ioremap_resource(dev, res) here
*/
reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index 7b118ee5f5e..ac025ca0842 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -73,7 +73,7 @@ EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
-void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
+void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
@@ -84,32 +84,12 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
return;
}
- switch (sphy->drv_data->cpu_type) {
- case TYPE_S3C64XX:
- /*
- * Do nothing: We will add here once S3C64xx goes for DT support
- */
- break;
- case TYPE_EXYNOS4210:
- /*
- * Fall through since exynos4210 and exynos5250 have similar
- * register architecture: two separate registers for host and
- * device phy control with enable bit at position 0.
- */
- case TYPE_EXYNOS5250:
- if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
- reg = sphy->pmuregs +
- sphy->drv_data->devphy_reg_offset;
- en_mask = sphy->drv_data->devphy_en_mask;
- } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
- reg = sphy->pmuregs +
- sphy->drv_data->hostphy_reg_offset;
- en_mask = sphy->drv_data->hostphy_en_mask;
- }
- break;
- default:
- dev_err(sphy->dev, "Invalid SoC type\n");
- return;
+ if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
+ reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
+ en_mask = sphy->drv_data->devphy_en_mask;
+ } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
+ reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
+ en_mask = sphy->drv_data->hostphy_en_mask;
}
reg_val = readl(reg);
@@ -120,8 +100,13 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
reg_val |= en_mask;
writel(reg_val, reg);
+
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
+ writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
+ writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
+ }
}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation);
+EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
@@ -162,73 +147,93 @@ int samsung_usbphy_set_type(struct usb_phy *phy,
}
EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
+int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
+ unsigned long rate)
+{
+ unsigned int clksel;
+
+ switch (rate) {
+ case 12 * MHZ:
+ clksel = PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ clksel = PHYCLK_CLKSEL_24M;
+ break;
+ case 48 * MHZ:
+ clksel = PHYCLK_CLKSEL_48M;
+ break;
+ default:
+ dev_err(sphy->dev,
+ "Invalid reference clock frequency: %lu\n", rate);
+ return -EINVAL;
+ }
+
+ return clksel;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx);
+
+int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
+ unsigned long rate)
+{
+ unsigned int clksel;
+
+ switch (rate) {
+ case 9600 * KHZ:
+ clksel = FSEL_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ clksel = FSEL_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ clksel = FSEL_CLKSEL_12M;
+ break;
+ case 19200 * KHZ:
+ clksel = FSEL_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ clksel = FSEL_CLKSEL_20M;
+ break;
+ case 24 * MHZ:
+ clksel = FSEL_CLKSEL_24M;
+ break;
+ case 50 * MHZ:
+ clksel = FSEL_CLKSEL_50M;
+ break;
+ default:
+ dev_err(sphy->dev,
+ "Invalid reference clock frequency: %lu\n", rate);
+ return -EINVAL;
+ }
+
+ return clksel;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12);
+
/*
* Returns reference clock frequency selection value
*/
int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
struct clk *ref_clk;
- int refclk_freq = 0;
+ unsigned long rate;
+ int refclk_freq;
/*
* In exynos5250 USB host and device PHY use
* external crystal clock XXTI
*/
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- ref_clk = devm_clk_get(sphy->dev, "ext_xtal");
+ ref_clk = clk_get(sphy->dev, "ext_xtal");
else
- ref_clk = devm_clk_get(sphy->dev, "xusbxti");
+ ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
- /* set clock frequency for PLL */
- switch (clk_get_rate(ref_clk)) {
- case 9600 * KHZ:
- refclk_freq = FSEL_CLKSEL_9600K;
- break;
- case 10 * MHZ:
- refclk_freq = FSEL_CLKSEL_10M;
- break;
- case 12 * MHZ:
- refclk_freq = FSEL_CLKSEL_12M;
- break;
- case 19200 * KHZ:
- refclk_freq = FSEL_CLKSEL_19200K;
- break;
- case 20 * MHZ:
- refclk_freq = FSEL_CLKSEL_20M;
- break;
- case 50 * MHZ:
- refclk_freq = FSEL_CLKSEL_50M;
- break;
- case 24 * MHZ:
- default:
- /* default reference clock */
- refclk_freq = FSEL_CLKSEL_24M;
- break;
- }
- } else {
- switch (clk_get_rate(ref_clk)) {
- case 12 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_24M;
- break;
- case 48 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_48M;
- break;
- default:
- if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
- refclk_freq = PHYCLK_CLKSEL_48M;
- else
- refclk_freq = PHYCLK_CLKSEL_24M;
- break;
- }
- }
+ rate = clk_get_rate(ref_clk);
+ refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate);
+
clk_put(ref_clk);
return refclk_freq;
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 70a9cae5e37..68771bfd182 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -47,6 +47,16 @@
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
+/* EXYNOS4X12 */
+#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04)
+#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08)
+
+#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
+#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
+#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
+
+#define RSTCON_HOSTPHY_SWRST (0xf << 3)
+
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
@@ -241,9 +251,12 @@
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
+ TYPE_EXYNOS4X12,
TYPE_EXYNOS5250,
};
+struct samsung_usbphy;
+
/*
* struct samsung_usbphy_drvdata - driver data for various SoC variants
* @cpu_type: machine identifier
@@ -268,6 +281,10 @@ struct samsung_usbphy_drvdata {
int hostphy_en_mask;
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
+ int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
+ void (*set_isolation)(struct samsung_usbphy *, bool);
+ void (*phy_enable)(struct samsung_usbphy *);
+ void (*phy_disable)(struct samsung_usbphy *);
};
/*
@@ -320,8 +337,13 @@ static inline const struct samsung_usbphy_drvdata
}
extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
-extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on);
+extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
+ bool on);
extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
extern int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type);
extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
+extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
+ unsigned long rate);
+extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
+ unsigned long rate);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 9d5e273abcc..1011c16ade7 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -176,6 +176,11 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
phypwr &= ~PHYPWR_NORMAL_MASK;
rstcon |= RSTCON_SWRST;
break;
+ case TYPE_EXYNOS4X12:
+ phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 |
+ PHYPWR_NORMAL_MASK_PHY1);
+ rstcon |= RSTCON_HOSTPHY_SWRST;
case TYPE_EXYNOS4210:
phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
rstcon |= RSTCON_SWRST;
@@ -189,6 +194,8 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
/* reset all ports of PHY and Link */
writel(rstcon, regs + SAMSUNG_RSTCON);
udelay(10);
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12)
+ rstcon &= ~RSTCON_HOSTPHY_SWRST;
rstcon &= ~RSTCON_SWRST;
writel(rstcon, regs + SAMSUNG_RSTCON);
}
@@ -239,6 +246,10 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
case TYPE_S3C64XX:
phypwr |= PHYPWR_NORMAL_MASK;
break;
+ case TYPE_EXYNOS4X12:
+ phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 |
+ PHYPWR_NORMAL_MASK_PHY1);
case TYPE_EXYNOS4210:
phypwr |= PHYPWR_NORMAL_MASK_PHY0;
default:
@@ -284,17 +295,14 @@ static int samsung_usb2phy_init(struct usb_phy *phy)
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
- else
- samsung_usbphy_set_isolation(sphy, false);
+ else if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, false);
/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
samsung_usbphy_cfg_sel(sphy);
/* Initialize usb phy registers */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- samsung_exynos5_usb2phy_enable(sphy);
- else
- samsung_usb2phy_enable(sphy);
+ sphy->drv_data->phy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -334,16 +342,13 @@ static void samsung_usb2phy_shutdown(struct usb_phy *phy)
}
/* De-initialize usb phy registers */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- samsung_exynos5_usb2phy_disable(sphy);
- else
- samsung_usb2phy_disable(sphy);
+ sphy->drv_data->phy_disable(sphy);
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
- else
- samsung_usbphy_set_isolation(sphy, true);
+ else if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -408,7 +413,10 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
sphy->phy.label = "samsung-usb2phy";
sphy->phy.init = samsung_usb2phy_init;
sphy->phy.shutdown = samsung_usb2phy_shutdown;
- sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+
+ sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+ if (sphy->ref_clk_freq < 0)
+ return -EINVAL;
sphy->phy.otg = otg;
sphy->phy.otg->phy = &sphy->phy;
@@ -438,18 +446,40 @@ static int samsung_usb2phy_remove(struct platform_device *pdev)
static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
.cpu_type = TYPE_S3C64XX,
.devphy_en_mask = S3C64XX_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
+ .set_isolation = NULL, /* TODO */
+ .phy_enable = samsung_usb2phy_enable,
+ .phy_disable = samsung_usb2phy_disable,
};
static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
.cpu_type = TYPE_EXYNOS4210,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_usb2phy_enable,
+ .phy_disable = samsung_usb2phy_disable,
+};
+
+static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
+ .cpu_type = TYPE_EXYNOS4X12,
+ .devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_usb2phy_enable,
+ .phy_disable = samsung_usb2phy_disable,
};
static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_exynos5_usb2phy_enable,
+ .phy_disable = samsung_exynos5_usb2phy_disable,
};
#ifdef CONFIG_OF
@@ -461,6 +491,9 @@ static const struct of_device_id samsung_usbphy_dt_match[] = {
.compatible = "samsung,exynos4210-usb2phy",
.data = &usb2phy_exynos4,
}, {
+ .compatible = "samsung,exynos4x12-usb2phy",
+ .data = &usb2phy_exynos4x12,
+ }, {
.compatible = "samsung,exynos5250-usb2phy",
.data = &usb2phy_exynos5
},
@@ -477,6 +510,9 @@ static struct platform_device_id samsung_usbphy_driver_ids[] = {
.name = "exynos4210-usb2phy",
.driver_data = (unsigned long)&usb2phy_exynos4,
}, {
+ .name = "exynos4x12-usb2phy",
+ .driver_data = (unsigned long)&usb2phy_exynos4x12,
+ }, {
.name = "exynos5250-usb2phy",
.driver_data = (unsigned long)&usb2phy_exynos5,
},
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index 5a9efcbcb53..300e0cf5e31 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -65,7 +65,7 @@ static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy)
return reg;
}
-static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
+static void samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phyparam0;
@@ -133,8 +133,6 @@ static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
phyclkrst &= ~(PHYCLKRST_PORTRESET);
writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
-
- return 0;
}
static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
@@ -184,10 +182,11 @@ static int samsung_usb3phy_init(struct usb_phy *phy)
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
/* Disable phy isolation */
- samsung_usbphy_set_isolation(sphy, false);
+ if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, false);
/* Initialize usb phy registers */
- samsung_exynos5_usb3phy_enable(sphy);
+ sphy->drv_data->phy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -218,10 +217,11 @@ static void samsung_usb3phy_shutdown(struct usb_phy *phy)
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
/* De-initialize usb phy registers */
- samsung_exynos5_usb3phy_disable(sphy);
+ sphy->drv_data->phy_disable(sphy);
/* Enable phy isolation */
- samsung_usbphy_set_isolation(sphy, true);
+ if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -274,7 +274,10 @@ static int samsung_usb3phy_probe(struct platform_device *pdev)
sphy->phy.init = samsung_usb3phy_init;
sphy->phy.shutdown = samsung_usb3phy_shutdown;
sphy->drv_data = samsung_usbphy_get_driver_data(pdev);
- sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+
+ sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+ if (sphy->ref_clk_freq < 0)
+ return -EINVAL;
spin_lock_init(&sphy->lock);
@@ -300,6 +303,10 @@ static int samsung_usb3phy_remove(struct platform_device *pdev)
static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_exynos5_usb3phy_enable,
+ .phy_disable = samsung_exynos5_usb3phy_disable,
};
#ifdef CONFIG_OF
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 17d811292f3..cec0855ed24 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -1,9 +1,11 @@
/*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2013 NVIDIA Corporation
*
* Author:
* Erik Gilling <konkers@google.com>
* Benoit Goby <benoit@android.com>
+ * Venu Byravarasu <vbyravarasu@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,6 +23,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/export.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
@@ -29,13 +32,19 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
+#include <linux/usb/ehci_def.h>
#include <linux/usb/tegra_usb_phy.h>
-#define TEGRA_USB_BASE 0xC5000000
-#define TEGRA_USB_SIZE SZ_16K
-
#define ULPI_VIEWPORT 0x170
+/* PORTSC registers */
+#define TEGRA_USB_PORTSC1 0x184
+#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
+#define TEGRA_USB_PORTSC1_PHCD (1 << 23)
+
+/* Bits of PORTSC1, which will get cleared by writing 1 into them */
+#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+
#define USB_SUSP_CTRL 0x400
#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
@@ -196,34 +205,41 @@ static struct tegra_utmip_config utmip_default[] = {
},
};
+static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
+{
+ void __iomem *base = phy->regs;
+ unsigned long val;
+
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ val &= ~TEGRA_USB_PORTSC1_PTS(3);
+ val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3);
+ writel(val, base + TEGRA_USB_PORTSC1);
+}
+
+static void set_phcd(struct tegra_usb_phy *phy, bool enable)
+{
+ void __iomem *base = phy->regs;
+ unsigned long val;
+
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ if (enable)
+ val |= TEGRA_USB_PORTSC1_PHCD;
+ else
+ val &= ~TEGRA_USB_PORTSC1_PHCD;
+ writel(val, base + TEGRA_USB_PORTSC1);
+}
+
static int utmip_pad_open(struct tegra_usb_phy *phy)
{
- phy->pad_clk = clk_get_sys("utmip-pad", NULL);
+ phy->pad_clk = devm_clk_get(phy->dev, "utmi-pads");
if (IS_ERR(phy->pad_clk)) {
pr_err("%s: can't get utmip pad clock\n", __func__);
return PTR_ERR(phy->pad_clk);
}
- if (phy->is_legacy_phy) {
- phy->pad_regs = phy->regs;
- } else {
- phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
- if (!phy->pad_regs) {
- pr_err("%s: can't remap usb registers\n", __func__);
- clk_put(phy->pad_clk);
- return -ENOMEM;
- }
- }
return 0;
}
-static void utmip_pad_close(struct tegra_usb_phy *phy)
-{
- if (!phy->is_legacy_phy)
- iounmap(phy->pad_regs);
- clk_put(phy->pad_clk);
-}
-
static void utmip_pad_power_on(struct tegra_usb_phy *phy)
{
unsigned long val, flags;
@@ -299,7 +315,7 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
val &= ~USB_SUSP_SET;
writel(val, base + USB_SUSP_CTRL);
} else
- phy->set_phcd(&phy->u_phy, true);
+ set_phcd(phy, true);
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
@@ -321,7 +337,7 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
val &= ~USB_SUSP_CLR;
writel(val, base + USB_SUSP_CTRL);
} else
- phy->set_phcd(&phy->u_phy, false);
+ set_phcd(phy, false);
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
USB_PHY_CLK_VALID))
@@ -444,7 +460,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
utmi_phy_clk_enable(phy);
if (!phy->is_legacy_phy)
- phy->set_pts(&phy->u_phy, 0);
+ set_pts(phy, 0);
return 0;
}
@@ -541,11 +557,18 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
int ret;
unsigned long val;
void __iomem *base = phy->regs;
- struct tegra_ulpi_config *config = phy->config;
- gpio_direction_output(config->reset_gpio, 0);
+ ret = gpio_direction_output(phy->reset_gpio, 0);
+ if (ret < 0) {
+ dev_err(phy->dev, "gpio %d not set to 0\n", phy->reset_gpio);
+ return ret;
+ }
msleep(5);
- gpio_direction_output(config->reset_gpio, 1);
+ ret = gpio_direction_output(phy->reset_gpio, 1);
+ if (ret < 0) {
+ dev_err(phy->dev, "gpio %d not set to 1\n", phy->reset_gpio);
+ return ret;
+ }
clk_prepare_enable(phy->clk);
msleep(1);
@@ -603,63 +626,15 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
{
- struct tegra_ulpi_config *config = phy->config;
-
clk_disable(phy->clk);
- return gpio_direction_output(config->reset_gpio, 0);
-}
-
-static int tegra_phy_init(struct usb_phy *x)
-{
- struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
- struct tegra_ulpi_config *ulpi_config;
- int err;
-
- if (phy->is_ulpi_phy) {
- ulpi_config = phy->config;
- phy->clk = clk_get_sys(NULL, ulpi_config->clk);
- if (IS_ERR(phy->clk)) {
- pr_err("%s: can't get ulpi clock\n", __func__);
- err = -ENXIO;
- goto err1;
- }
- if (!gpio_is_valid(ulpi_config->reset_gpio))
- ulpi_config->reset_gpio =
- of_get_named_gpio(phy->dev->of_node,
- "nvidia,phy-reset-gpio", 0);
- if (!gpio_is_valid(ulpi_config->reset_gpio)) {
- pr_err("%s: invalid reset gpio: %d\n", __func__,
- ulpi_config->reset_gpio);
- err = -EINVAL;
- goto err1;
- }
- gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
- gpio_direction_output(ulpi_config->reset_gpio, 0);
- phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
- phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
- } else {
- err = utmip_pad_open(phy);
- if (err < 0)
- goto err1;
- }
- return 0;
-err1:
- clk_disable_unprepare(phy->pll_u);
- clk_put(phy->pll_u);
- return err;
+ return gpio_direction_output(phy->reset_gpio, 0);
}
static void tegra_usb_phy_close(struct usb_phy *x)
{
struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
- if (phy->is_ulpi_phy)
- clk_put(phy->clk);
- else
- utmip_pad_close(phy);
clk_disable_unprepare(phy->pll_u);
- clk_put(phy->pll_u);
- kfree(phy);
}
static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
@@ -687,54 +662,63 @@ static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
return tegra_usb_phy_power_on(phy);
}
-struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
- void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode,
- void (*set_pts)(struct usb_phy *x, u8 pts_val),
- void (*set_phcd)(struct usb_phy *x, bool enable))
+static int ulpi_open(struct tegra_usb_phy *phy)
+{
+ int err;
+
+ phy->clk = devm_clk_get(phy->dev, "ulpi-link");
+ if (IS_ERR(phy->clk)) {
+ pr_err("%s: can't get ulpi clock\n", __func__);
+ return PTR_ERR(phy->clk);
+ }
+
+ err = devm_gpio_request(phy->dev, phy->reset_gpio, "ulpi_phy_reset_b");
+ if (err < 0) {
+ dev_err(phy->dev, "request failed for gpio: %d\n",
+ phy->reset_gpio);
+ return err;
+ }
+
+ err = gpio_direction_output(phy->reset_gpio, 0);
+ if (err < 0) {
+ dev_err(phy->dev, "gpio %d direction not set to output\n",
+ phy->reset_gpio);
+ return err;
+ }
+
+ phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+ if (!phy->ulpi) {
+ dev_err(phy->dev, "otg_ulpi_create returned NULL\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
+ return 0;
+}
+static int tegra_usb_phy_init(struct tegra_usb_phy *phy)
{
- struct tegra_usb_phy *phy;
unsigned long parent_rate;
int i;
int err;
- struct device_node *np = dev->of_node;
-
- phy = kzalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
- if (!phy)
- return ERR_PTR(-ENOMEM);
-
- phy->instance = instance;
- phy->regs = regs;
- phy->config = config;
- phy->mode = phy_mode;
- phy->dev = dev;
- phy->is_legacy_phy =
- of_property_read_bool(np, "nvidia,has-legacy-mode");
- phy->set_pts = set_pts;
- phy->set_phcd = set_phcd;
- err = of_property_match_string(np, "phy_type", "ulpi");
- if (err < 0)
- phy->is_ulpi_phy = false;
- else
- phy->is_ulpi_phy = true;
-
- if (!phy->config) {
- if (phy->is_ulpi_phy) {
- pr_err("%s: ulpi phy configuration missing", __func__);
- err = -EINVAL;
- goto err0;
- } else {
- phy->config = &utmip_default[instance];
- }
+
+ if (!phy->is_ulpi_phy) {
+ if (phy->is_legacy_phy)
+ phy->config = &utmip_default[0];
+ else
+ phy->config = &utmip_default[2];
}
- phy->pll_u = clk_get_sys(NULL, "pll_u");
+ phy->pll_u = devm_clk_get(phy->dev, "pll_u");
if (IS_ERR(phy->pll_u)) {
pr_err("Can't get pll_u clock\n");
- err = PTR_ERR(phy->pll_u);
- goto err0;
+ return PTR_ERR(phy->pll_u);
}
- clk_prepare_enable(phy->pll_u);
+
+ err = clk_prepare_enable(phy->pll_u);
+ if (err)
+ return err;
parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
@@ -746,23 +730,22 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
if (!phy->freq) {
pr_err("invalid pll_u parent rate %ld\n", parent_rate);
err = -EINVAL;
- goto err1;
+ goto fail;
}
- phy->u_phy.init = tegra_phy_init;
- phy->u_phy.shutdown = tegra_usb_phy_close;
- phy->u_phy.set_suspend = tegra_usb_phy_suspend;
+ if (phy->is_ulpi_phy)
+ err = ulpi_open(phy);
+ else
+ err = utmip_pad_open(phy);
+ if (err < 0)
+ goto fail;
- return phy;
+ return 0;
-err1:
+fail:
clk_disable_unprepare(phy->pll_u);
- clk_put(phy->pll_u);
-err0:
- kfree(phy);
- return ERR_PTR(err);
+ return err;
}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
void tegra_usb_phy_preresume(struct usb_phy *x)
{
@@ -801,3 +784,124 @@ void tegra_ehci_phy_restore_end(struct usb_phy *x)
}
EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
+static int tegra_usb_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct tegra_usb_phy *tegra_phy = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ int err;
+
+ tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
+ if (!tegra_phy) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ tegra_phy->regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->is_legacy_phy =
+ of_property_read_bool(np, "nvidia,has-legacy-mode");
+
+ err = of_property_match_string(np, "phy_type", "ulpi");
+ if (err < 0) {
+ tegra_phy->is_ulpi_phy = false;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n");
+ return -ENXIO;
+ }
+
+ tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->regs) {
+ dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
+ return -ENOMEM;
+ }
+ } else {
+ tegra_phy->is_ulpi_phy = true;
+
+ tegra_phy->reset_gpio =
+ of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0);
+ if (!gpio_is_valid(tegra_phy->reset_gpio)) {
+ dev_err(&pdev->dev, "invalid gpio: %d\n",
+ tegra_phy->reset_gpio);
+ return tegra_phy->reset_gpio;
+ }
+ }
+
+ err = of_property_match_string(np, "dr_mode", "otg");
+ if (err < 0) {
+ err = of_property_match_string(np, "dr_mode", "peripheral");
+ if (err < 0)
+ tegra_phy->mode = TEGRA_USB_PHY_MODE_HOST;
+ else
+ tegra_phy->mode = TEGRA_USB_PHY_MODE_DEVICE;
+ } else
+ tegra_phy->mode = TEGRA_USB_PHY_MODE_OTG;
+
+ tegra_phy->dev = &pdev->dev;
+ err = tegra_usb_phy_init(tegra_phy);
+ if (err < 0)
+ return err;
+
+ tegra_phy->u_phy.shutdown = tegra_usb_phy_close;
+ tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend;
+
+ dev_set_drvdata(&pdev->dev, tegra_phy);
+ return 0;
+}
+
+static struct of_device_id tegra_usb_phy_id_table[] = {
+ { .compatible = "nvidia,tegra20-usb-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+
+static struct platform_driver tegra_usb_phy_driver = {
+ .probe = tegra_usb_phy_probe,
+ .driver = {
+ .name = "tegra-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(tegra_usb_phy_id_table),
+ },
+};
+module_platform_driver(tegra_usb_phy_driver);
+
+static int tegra_usb_phy_match(struct device *dev, void *data)
+{
+ struct tegra_usb_phy *tegra_phy = dev_get_drvdata(dev);
+ struct device_node *dn = data;
+
+ return (tegra_phy->dev->of_node == dn) ? 1 : 0;
+}
+
+struct usb_phy *tegra_usb_get_phy(struct device_node *dn)
+{
+ struct device *dev;
+ struct tegra_usb_phy *tegra_phy;
+
+ dev = driver_find_device(&tegra_usb_phy_driver.driver, NULL, dn,
+ tegra_usb_phy_match);
+ if (!dev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ tegra_phy = dev_get_drvdata(dev);
+
+ return &tegra_phy->u_phy;
+}
+EXPORT_SYMBOL_GPL(tegra_usb_get_phy);
+
+MODULE_DESCRIPTION("Tegra USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index c5ba7e5423f..7c22a5390fc 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -12,6 +12,7 @@
*
*/
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/io.h>
@@ -78,3 +79,4 @@ struct usb_phy_io_ops ulpi_viewport_access_ops = {
.read = ulpi_viewport_read,
.write = ulpi_viewport_write,
};
+EXPORT_SYMBOL_GPL(ulpi_viewport_access_ops);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 1d55762afbb..8c3a42ea910 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -710,6 +710,16 @@ config USB_SERIAL_QT2
To compile this driver as a module, choose M here: the
module will be called quatech-serial.
+config USB_SERIAL_FLASHLOADER
+ tristate "Infineon Modem Flashloader USB interface driver"
+ help
+ Say Y here if you want to download Infineon Modem
+ via USB Flashloader serial driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called flashloader.
+
+
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index cec63fa1910..f7130114488 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -65,3 +65,4 @@ obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o
obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o
+obj-$(CONFIG_USB_SERIAL_FLASHLOADER) += flashloader.o
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 40e7fd94646..bc77e955cbe 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -413,8 +413,8 @@ static int ark3116_ioctl(struct tty_struct *tty,
/* XXX: Some of these values are probably wrong. */
memset(&serstruct, 0, sizeof(serstruct));
serstruct.type = PORT_16654;
- serstruct.line = port->serial->minor;
- serstruct.port = port->number;
+ serstruct.line = port->minor;
+ serstruct.port = port->port_number;
serstruct.custom_divisor = 0;
serstruct.baud_base = 460800;
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 3c4db6d196c..f053b302a00 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -43,7 +43,7 @@ static ssize_t show_port_number(struct device *dev,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
- return sprintf(buf, "%d\n", port->number - port->serial->minor);
+ return sprintf(buf, "%d\n", port->port_number);
}
static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL);
@@ -80,7 +80,7 @@ static int usb_serial_device_probe(struct device *dev)
goto exit_with_autopm;
}
- minor = port->number;
+ minor = port->minor;
tty_register_device(usb_serial_tty_driver, minor, dev);
dev_info(&port->serial->dev->dev,
"%s converter now attached to ttyUSB%d\n",
@@ -106,7 +106,7 @@ static int usb_serial_device_remove(struct device *dev)
/* make sure suspend/resume doesn't race against port_remove */
usb_autopm_get_interface(port->serial->interface);
- minor = port->number;
+ minor = port->minor;
tty_unregister_device(usb_serial_tty_driver, minor);
device_remove_file(&port->dev, &dev_attr_port_number);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 5f3bcd31e20..afb50eab204 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -108,18 +108,18 @@ static int usb_console_setup(struct console *co, char *options)
* no need to check the index here: if the index is wrong, console
* code won't call us
*/
- serial = usb_serial_get_by_index(co->index);
- if (serial == NULL) {
+ port = usb_serial_port_get_by_minor(co->index);
+ if (port == NULL) {
/* no device is connected yet, sorry :( */
pr_err("No USB device connected to ttyUSB%i\n", co->index);
return -ENODEV;
}
+ serial = port->serial;
retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto error_get_interface;
- port = serial->port[co->index - serial->minor];
tty_port_tty_set(&port->port, NULL);
info->port = port;
@@ -210,7 +210,7 @@ static void usb_console_write(struct console *co,
if (count == 0)
return;
- pr_debug("%s - port %d, %d byte(s)\n", __func__, port->number, count);
+ pr_debug("%s - minor %d, %d byte(s)\n", __func__, port->minor, count);
if (!port->port.console) {
pr_debug("%s - port not opened\n", __func__);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 2c659553c07..d6ef2f8da37 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -666,8 +666,6 @@ static void cp210x_set_termios(struct tty_struct *tty,
unsigned int bits;
unsigned int modem_ctl[4];
- dev_dbg(dev, "%s - port %d\n", __func__, port->number);
-
if (!tty)
return;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 082120198f8..e948dc02795 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -435,7 +435,7 @@ static void cypress_set_dead(struct usb_serial_port *port)
spin_unlock_irqrestore(&priv->lock, flags);
dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
- "interval might be too short\n", port->number);
+ "interval might be too short\n", port->port_number);
}
@@ -667,7 +667,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
{
struct cypress_private *priv = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s - port %d, %d bytes\n", __func__, port->number, count);
+ dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
/* line control commands, which need to be executed immediately,
are not put into the buffer for obvious reasons.
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 7b807d38952..19b467fe038 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1304,11 +1304,7 @@ static void digi_release(struct usb_serial *serial)
static int digi_port_probe(struct usb_serial_port *port)
{
- unsigned port_num;
-
- port_num = port->number - port->serial->minor;
-
- return digi_port_init(port, port_num);
+ return digi_port_init(port, port->port_number);
}
static int digi_port_remove(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 7d8dd5aad23..75e85cbf9e8 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -288,15 +288,14 @@ static int f81232_ioctl(struct tty_struct *tty,
struct serial_struct ser;
struct usb_serial_port *port = tty->driver_data;
- dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
- port->number, cmd);
+ dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd);
switch (cmd) {
case TIOCGSERIAL:
memset(&ser, 0, sizeof ser);
ser.type = PORT_16654;
- ser.line = port->serial->minor;
- ser.port = port->number;
+ ser.line = port->minor;
+ ser.port = port->port_number;
ser.baud_base = 460800;
if (copy_to_user((void __user *)arg, &ser, sizeof ser))
diff --git a/drivers/usb/serial/flashloader.c b/drivers/usb/serial/flashloader.c
new file mode 100644
index 00000000000..e6f5c10e891
--- /dev/null
+++ b/drivers/usb/serial/flashloader.c
@@ -0,0 +1,39 @@
+/*
+ * Infineon Flashloader driver
+ *
+ * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x8087, 0x0716) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver flashloader_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "flashloader",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &flashloader_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index b110c573ea8..04b5ed90ffb 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -948,9 +948,9 @@ static void garmin_close(struct usb_serial_port *port)
{
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n",
- __func__, port->number, garmin_data_p->mode,
- garmin_data_p->state, garmin_data_p->flags);
+ dev_dbg(&port->dev, "%s - mode=%d state=%d flags=0x%X\n",
+ __func__, garmin_data_p->mode, garmin_data_p->state,
+ garmin_data_p->flags);
garmin_clear(garmin_data_p);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 1477e859347..dc2803b5eb0 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -915,8 +915,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
return -ENOMEM;
}
- dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n",
- __func__, port->number, edge_port->maxTxCredits);
+ dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n",
+ __func__, edge_port->maxTxCredits);
return 0;
}
@@ -1122,9 +1122,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
copySize = min((unsigned int)count,
(edge_port->txCredits - fifo->count));
- dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n",
- __func__, port->number, count,
- edge_port->txCredits - fifo->count, copySize);
+ dev_dbg(&port->dev, "%s of %d byte(s) Fifo room %d -- will copy %d bytes\n",
+ __func__, count, edge_port->txCredits - fifo->count, copySize);
/* catch writes of 0 bytes which the tty driver likes to give us,
and when txCredits is empty */
@@ -1216,9 +1215,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
if (edge_port->write_in_progress ||
!edge_port->open ||
(fifo->count == 0)) {
- dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n",
- __func__, edge_port->port->number,
- fifo->count, edge_port->write_in_progress);
+ dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n",
+ __func__, fifo->count, edge_port->write_in_progress);
goto exit_send;
}
@@ -1230,9 +1228,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
* it's better to wait for more credits so we can do a larger write.
*/
if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
- dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n",
- __func__, edge_port->port->number, fifo->count,
- edge_port->txCredits);
+ dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n",
+ __func__, fifo->count, edge_port->txCredits);
goto exit_send;
}
@@ -1256,10 +1253,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
edge_port->write_in_progress = false;
goto exit_send;
}
- buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number
- - edge_port->port->serial->minor, count);
- buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number
- - edge_port->port->serial->minor, count);
+ buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count);
+ buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count);
/* now copy our data */
bytesleft = fifo->size - fifo->tail;
@@ -1377,8 +1372,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
if (num_chars) {
- dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__,
- port->number, num_chars);
+ dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars);
}
return num_chars;
@@ -1575,8 +1569,8 @@ static int get_serial_info(struct edgeport_port *edge_port,
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
- tmp.line = edge_port->port->serial->minor;
- tmp.port = edge_port->port->number;
+ tmp.line = edge_port->port->minor;
+ tmp.port = edge_port->port->port_number;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
tmp.xmit_fifo_size = edge_port->maxTxCredits;
@@ -1601,15 +1595,15 @@ static int edge_ioctl(struct tty_struct *tty,
DEFINE_WAIT(wait);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
switch (cmd) {
case TIOCSERGETLSR:
- dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
return get_lsr_info(edge_port, (unsigned int __user *) arg);
case TIOCGSERIAL:
- dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
return get_serial_info(edge_port, (struct serial_struct __user *) arg);
}
return -ENOIOCTLCMD;
@@ -2181,9 +2175,8 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
currentCommand = buffer;
- MAKE_CMD_EXT_CMD(&currentCommand, &length,
- edge_port->port->number - edge_port->port->serial->minor,
- command, param);
+ MAKE_CMD_EXT_CMD(&currentCommand, &length, edge_port->port->port_number,
+ command, param);
status = write_cmd_usb(edge_port, buffer, length);
if (status) {
@@ -2266,18 +2259,16 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
int cmdLen = 0;
int divisor;
int status;
- unsigned char number =
- edge_port->port->number - edge_port->port->serial->minor;
+ u32 number = edge_port->port->port_number;
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
- dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n",
- edge_port->port->number, baudRate);
+ dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n",
+ baudRate);
return 0;
}
- dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__,
- edge_port->port->number, baudRate);
+ dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate);
status = calc_baud_rate_divisor(dev, baudRate, &divisor);
if (status) {
@@ -2388,9 +2379,8 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
currCmd = cmdBuffer;
/* Build a cmd in the buffer to write the given register */
- MAKE_CMD_WRITE_REG(&currCmd, &cmdLen,
- edge_port->port->number - edge_port->port->serial->minor,
- regNum, regValue);
+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number,
+ regNum, regValue);
status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
if (status) {
@@ -2424,8 +2414,6 @@ static void change_port_settings(struct tty_struct *tty,
__u8 txFlow;
int status;
- dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number);
-
if (!edge_port->open &&
!edge_port->openPending) {
dev_dbg(dev, "%s - port not opened\n", __func__);
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 1be6ba7bee2..60054e72b75 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -259,7 +259,7 @@ static int send_cmd(struct usb_device *dev, __u8 command,
/* clear tx/rx buffers and fifo in TI UMP */
static int purge_port(struct usb_serial_port *port, __u16 mask)
{
- int port_number = port->number - port->serial->minor;
+ int port_number = port->port_number;
dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask);
@@ -1392,7 +1392,8 @@ stayinbootmode:
static int ti_do_config(struct edgeport_port *port, int feature, int on)
{
- int port_number = port->port->number - port->port->serial->minor;
+ int port_number = port->port->port_number;
+
on = !!on; /* 1 or 0 not bitmask */
return send_cmd(port->port->serial->dev,
feature, (__u8)(UMPM_UART1_PORT + port_number),
@@ -1637,7 +1638,7 @@ static void edge_bulk_in_callback(struct urb *urb)
return;
}
- port_number = edge_port->port->number - edge_port->port->serial->minor;
+ port_number = edge_port->port->port_number;
if (edge_port->lsr_event) {
edge_port->lsr_event = 0;
@@ -1730,7 +1731,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
if (edge_port == NULL)
return -ENODEV;
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
switch (port_number) {
case 0:
edge_port->uart_base = UMPMEM_BASE_UART1;
@@ -1908,7 +1909,7 @@ static void edge_close(struct usb_serial_port *port)
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
send_cmd(serial->dev, UMPC_CLOSE_PORT,
(__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
@@ -2137,10 +2138,7 @@ static void change_port_settings(struct tty_struct *tty,
int baud;
unsigned cflag;
int status;
- int port_number = edge_port->port->number -
- edge_port->port->serial->minor;
-
- dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number);
+ int port_number = edge_port->port->port_number;
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
@@ -2284,7 +2282,6 @@ static void edge_set_termios(struct tty_struct *tty,
tty->termios.c_cflag, tty->termios.c_iflag);
dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
old_termios->c_cflag, old_termios->c_iflag);
- dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
if (edge_port == NULL)
return;
@@ -2366,8 +2363,8 @@ static int get_serial_info(struct edgeport_port *edge_port,
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
- tmp.line = edge_port->port->serial->minor;
- tmp.port = edge_port->port->number;
+ tmp.line = edge_port->port->minor;
+ tmp.port = edge_port->port->port_number;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
tmp.xmit_fifo_size = edge_port->port->bulk_out_size;
@@ -2386,7 +2383,7 @@ static int edge_ioctl(struct tty_struct *tty,
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
switch (cmd) {
case TIOCGSERIAL:
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 3549d073df2..5a979729f8e 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -152,7 +152,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
cflag = tty->termios.c_cflag;
- device_port = port->number - port->serial->minor;
+ device_port = port->port_number;
/* Baud rate calculation takes baud rate as an integer
so other rates can be generated if desired. */
@@ -234,8 +234,8 @@ static int keyspan_write(struct tty_struct *tty,
dataOffset = 1;
}
- dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n",
- __func__, port->number, count, p_priv->out_flip);
+ dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,
+ p_priv->out_flip);
for (left = count; left > 0; left -= todo) {
todo = left;
@@ -520,12 +520,7 @@ static void usa28_instat_callback(struct urb *urb)
goto exit;
}
- /*
- dev_dbg(&urb->dev->dev,
- "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__,
- data[0], data[1], data[2], data[3], data[4], data[5],
- data[6], data[7], data[8], data[9], data[10], data[11]);
- */
+ /*dev_dbg(&urb->dev->dev, "%s %12ph", __func__, data);*/
/* Now do something useful with the data */
msg = (struct keyspan_usa28_portStatusMessage *)data;
@@ -607,11 +602,7 @@ static void usa49_instat_callback(struct urb *urb)
goto exit;
}
- /*
- dev_dbg(&urb->dev->dev, "%s: %x %x %x %x %x %x %x %x %x %x %x",
- __func__, data[0], data[1], data[2], data[3], data[4],
- data[5], data[6], data[7], data[8], data[9], data[10]);
- */
+ /*dev_dbg(&urb->dev->dev, "%s: %11ph", __func__, data);*/
/* Now do something useful with the data */
msg = (struct keyspan_usa49_portStatusMessage *)data;
@@ -1050,7 +1041,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
/* get the terminal config for the setup message now so we don't
* need to send 2 of them */
- device_port = port->number - port->serial->minor;
+ device_port = port->port_number;
if (tty) {
cflag = tty->termios.c_cflag;
/* Baud rate calculation takes baud rate as an integer
@@ -1556,7 +1547,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
d_details = s_priv->device_details;
- device_port = port->number - port->serial->minor;
+ device_port = port->port_number;
this_urb = p_priv->outcont_urb;
@@ -1700,7 +1691,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
d_details = s_priv->device_details;
- device_port = port->number - port->serial->minor;
+ device_port = port->port_number;
/* only do something if we have a bulk out endpoint */
this_urb = p_priv->outcont_urb;
@@ -1830,17 +1821,16 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
this_urb = s_priv->glocont_urb;
/* Work out which port within the device is being setup */
- device_port = port->number - port->serial->minor;
+ device_port = port->port_number;
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
return -1;
}
- dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n",
- __func__, usb_pipeendpoint(this_urb->pipe),
- port->number, device_port);
+ dev_dbg(&port->dev, "%s - endpoint %d (%d)\n",
+ __func__, usb_pipeendpoint(this_urb->pipe), device_port);
/* Save reset port val for resend.
Don't overwrite resend for open/close condition. */
@@ -1855,7 +1845,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
- /*msg.portNumber = port->number;*/
msg.portNumber = device_port;
/* Only set baud rate if it's changed */
@@ -2145,12 +2134,11 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
this_urb = s_priv->glocont_urb;
/* Work out which port within the device is being setup */
- device_port = port->number - port->serial->minor;
+ device_port = port->port_number;
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__,
- port->number);
+ dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
return -1;
}
@@ -2391,7 +2379,7 @@ static int keyspan_port_probe(struct usb_serial_port *port)
/* Setup values for the various callback routines */
cback = &keyspan_callbacks[d_details->msg_format];
- port_num = port->number - port->serial->minor;
+ port_num = port->port_number;
/* Do indat endpoints first, once for each flip */
endp = d_details->indat_endpoints[port_num];
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 47e247759eb..40ccf6e5e31 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -224,8 +224,8 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port);
if (result) {
dev_err(&port->dev,
- "%s - failed to configure device for port number=%d, error code=%d\n",
- __func__, port->number, result);
+ "%s - failed to configure device, error code=%d\n",
+ __func__, result);
goto exit;
}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index f27c621a929..51da424327b 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1047,7 +1047,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
*
* 0x08 : SP1/2 Control Reg
*/
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
read_mos_reg(serial, port_number, LSR, &data);
dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
@@ -1066,7 +1066,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
- data = data | (port->number - port->serial->minor + 1);
+ data = data | (port->port_number + 1);
write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
mos7720_port->shadowLCR = 0x83;
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
@@ -1147,8 +1147,8 @@ static void mos7720_close(struct usb_serial_port *port)
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
- write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00);
- write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00);
+ write_mos_reg(serial, port->port_number, MCR, 0x00);
+ write_mos_reg(serial, port->port_number, IER, 0x00);
mos7720_port->open = 0;
}
@@ -1172,8 +1172,7 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
mos7720_port->shadowLCR = data;
- write_mos_reg(serial, port->number - port->serial->minor,
- LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR);
}
/*
@@ -1304,8 +1303,8 @@ static void mos7720_throttle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
if (status != 0)
return;
}
@@ -1336,8 +1335,8 @@ static void mos7720_unthrottle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
if (status != 0)
return;
}
@@ -1361,7 +1360,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
* Init Sequence for higher rates
***********************************************/
dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
write_mos_reg(serial, port_number, IER, 0x00);
write_mos_reg(serial, port_number, FCR, 0x00);
@@ -1487,7 +1486,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
port = mos7720_port->port;
serial = port->serial;
- number = port->number - port->serial->minor;
+ number = port->port_number;
dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate);
/* Calculate the Divisor */
@@ -1538,7 +1537,7 @@ static void change_port_settings(struct tty_struct *tty,
port = mos7720_port->port;
serial = port->serial;
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
if (!mos7720_port->open) {
dev_dbg(&port->dev, "%s - port not opened\n", __func__);
@@ -1731,7 +1730,7 @@ static int get_lsr_info(struct tty_struct *tty,
struct usb_serial_port *port = tty->driver_data;
unsigned int result = 0;
unsigned char data = 0;
- int port_number = port->number - port->serial->minor;
+ int port_number = port->port_number;
int count;
count = mos7720_chars_in_buffer(tty);
@@ -1793,8 +1792,8 @@ static int mos7720_tiocmset(struct tty_struct *tty,
mcr &= ~UART_MCR_LOOP;
mos7720_port->shadowMCR = mcr;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
return 0;
}
@@ -1838,8 +1837,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
}
mos7720_port->shadowMCR = mcr;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
return 0;
}
@@ -1855,8 +1854,8 @@ static int get_serial_info(struct moschip_port *mos7720_port,
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
- tmp.line = mos7720_port->port->serial->minor;
- tmp.port = mos7720_port->port->number;
+ tmp.line = mos7720_port->port->minor;
+ tmp.port = mos7720_port->port->port_number;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7e998081e1c..0a818b23850 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -303,15 +303,12 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
/* For the UART control registers, the application number need
to be Or'ed */
if (port->serial->num_ports == 4) {
- val |= (((__u16) port->number -
- (__u16) (port->serial->minor)) + 1) << 8;
+ val |= ((__u16)port->port_number + 1) << 8;
} else {
- if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
- val |= (((__u16) port->number -
- (__u16) (port->serial->minor)) + 1) << 8;
+ if (port->port_number == 0) {
+ val |= ((__u16)port->port_number + 1) << 8;
} else {
- val |= (((__u16) port->number -
- (__u16) (port->serial->minor)) + 2) << 8;
+ val |= ((__u16)port->port_number + 2) << 8;
}
}
dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
@@ -340,16 +337,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
/* Wval is same as application number */
if (port->serial->num_ports == 4) {
- Wval =
- (((__u16) port->number - (__u16) (port->serial->minor)) +
- 1) << 8;
+ Wval = ((__u16)port->port_number + 1) << 8;
} else {
- if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
- Wval = (((__u16) port->number -
- (__u16) (port->serial->minor)) + 1) << 8;
+ if (port->port_number == 0) {
+ Wval = ((__u16)port->port_number + 1) << 8;
} else {
- Wval = (((__u16) port->number -
- (__u16) (port->serial->minor)) + 2) << 8;
+ Wval = ((__u16)port->port_number + 2) << 8;
}
}
dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
@@ -631,9 +624,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
for (i = 0; i < serial->num_ports; i++) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- wval =
- (((__u16) serial->port[i]->number -
- (__u16) (serial->minor)) + 1) << 8;
+ wval = ((__u16)serial->port[i]->port_number + 1) << 8;
if (mos7840_port->open) {
if (sp[i] & 0x01) {
dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
@@ -1065,8 +1056,8 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
* (can't set it up in mos7840_startup as the *
* structures were not set up at that time.) */
- dev_dbg(&port->dev, "port number is %d\n", port->number);
- dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "port number is %d\n", port->port_number);
+ dev_dbg(&port->dev, "minor number is %d\n", port->minor);
dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
@@ -1074,9 +1065,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
mos7840_port->read_urb = port->read_urb;
/* set up our bulk in urb */
- if ((serial->num_ports == 2)
- && ((((__u16)port->number -
- (__u16)(port->serial->minor)) % 2) != 0)) {
+ if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) {
usb_fill_bulk_urb(mos7840_port->read_urb,
serial->dev,
usb_rcvbulkpipe(serial->dev,
@@ -1199,7 +1188,7 @@ static void mos7840_close(struct usb_serial_port *port)
mos7840_port->read_urb_busy = false;
port0->open_ports--;
- dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number);
+ dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
@@ -1435,9 +1424,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
memcpy(urb->transfer_buffer, current_position, transfer_size);
/* fill urb with data and submit */
- if ((serial->num_ports == 2)
- && ((((__u16)port->number -
- (__u16)(port->serial->minor)) % 2) != 0)) {
+ if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) {
usb_fill_bulk_urb(urb,
serial->dev,
usb_sndbulkpipe(serial->dev,
@@ -1732,10 +1719,9 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
if (mos7840_serial_paranoia_check(port->serial, __func__))
return -1;
- number = mos7840_port->port->number - mos7840_port->port->serial->minor;
+ number = mos7840_port->port->port_number;
- dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__,
- mos7840_port->port->number, baudRate);
+ dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);
/* reset clk_uart_sel in spregOffset */
if (baudRate > 115200) {
#ifdef HW_flow_control
@@ -2016,7 +2002,6 @@ static void mos7840_set_termios(struct tty_struct *tty,
tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* change the port settings to the new ones specified */
@@ -2083,8 +2068,8 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
- tmp.line = mos7840_port->port->serial->minor;
- tmp.port = mos7840_port->port->number;
+ tmp.line = mos7840_port->port->minor;
+ tmp.port = mos7840_port->port->port_number;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
@@ -2240,7 +2225,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
- pnum = port->number - serial->minor;
+ pnum = port->port_number;
dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
@@ -2261,10 +2246,8 @@ static int mos7840_port_probe(struct usb_serial_port *port)
* usb-serial.c:get_free_serial() and cannot therefore be used
* to index device instances */
mos7840_port->port_num = pnum + 1;
- dev_dbg(&port->dev, "port->number = %d\n", port->number);
- dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "port->minor = %d\n", port->minor);
dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
- dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 5f4b0cd0f6e..cbe779f578f 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -348,7 +348,7 @@ static int get_serial_info(struct usb_serial_port *port,
/* fake emulate a 16550 uart to make userspace code happy */
tmp.type = PORT_16550A;
- tmp.line = port->serial->minor;
+ tmp.line = port->minor;
tmp.port = 0;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
@@ -367,7 +367,7 @@ static int opticon_ioctl(struct tty_struct *tty,
{
struct usb_serial_port *port = tty->driver_data;
- dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
switch (cmd) {
case TIOCGSERIAL:
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index bd4323ddae1..5dd857de05b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -159,8 +159,6 @@ static void option_instat_callback(struct urb *urb);
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
#define NOVATELWIRELESS_PRODUCT_E362 0x9010
-#define NOVATELWIRELESS_PRODUCT_G1 0xA001
-#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
@@ -730,8 +728,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) },
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 048cd44d51b..cb6bbed374f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -275,7 +275,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
u8 control;
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
4800, 7200, 9600, 14400, 19200, 28800, 38400,
- 57600, 115200, 230400, 460800, 614400,
+ 57600, 115200, 230400, 460800, 500000, 614400,
921600, 1228800, 2457600, 3000000, 6000000 };
int baud_floor, baud_ceil;
int k;
@@ -301,8 +301,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
- dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i,
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+ dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
@@ -449,8 +448,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
- dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i,
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+ dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
if (cflag & CRTSCTS) {
if (spriv->type == HX)
@@ -641,8 +639,8 @@ static int pl2303_ioctl(struct tty_struct *tty,
case TIOCGSERIAL:
memset(&ser, 0, sizeof ser);
ser.type = PORT_16654;
- ser.line = port->serial->minor;
- ser.port = port->number;
+ ser.line = port->minor;
+ ser.port = port->port_number;
ser.baud_base = 460800;
if (copy_to_user((void __user *)arg, &ser, sizeof ser))
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index bd794b43898..c65437cfd4a 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -35,7 +35,13 @@ static const struct usb_device_id id_table[] = {
{DEVICE_G1K(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
{DEVICE_G1K(0x413c, 0x8172)}, /* Dell Gobi Modem device */
{DEVICE_G1K(0x413c, 0x8171)}, /* Dell Gobi QDL device */
- {DEVICE_G1K(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {DEVICE_G1K(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */
+ {DEVICE_G1K(0x1410, 0xa002)}, /* Novatel Gobi Modem device */
+ {DEVICE_G1K(0x1410, 0xa003)}, /* Novatel Gobi Modem device */
+ {DEVICE_G1K(0x1410, 0xa004)}, /* Novatel Gobi Modem device */
+ {DEVICE_G1K(0x1410, 0xa005)}, /* Novatel Gobi Modem device */
+ {DEVICE_G1K(0x1410, 0xa006)}, /* Novatel Gobi Modem device */
+ {DEVICE_G1K(0x1410, 0xa007)}, /* Novatel Gobi Modem device */
{DEVICE_G1K(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
{DEVICE_G1K(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
{DEVICE_G1K(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 02b0803425c..d99743290fc 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -343,7 +343,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
int status;
unsigned long flags;
- device_port = (u16) (port->number - port->serial->minor);
+ device_port = port->port_number;
serial = port->serial;
@@ -388,9 +388,8 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
status = qt2_set_port_config(serial->dev, device_port,
DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
if (status < 0) {
- dev_err(&port->dev,
- "%s - initial setup failed for port %i (%i)\n",
- __func__, port->number, device_port);
+ dev_err(&port->dev, "%s - initial setup failed (%i)\n",
+ __func__, device_port);
return status;
}
@@ -466,7 +465,7 @@ static int get_serial_info(struct usb_serial_port *port,
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- tmp.line = port->serial->minor;
+ tmp.line = port->minor;
tmp.port = 0;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
@@ -523,7 +522,7 @@ static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch)
return;
}
-void qt2_process_read_urb(struct urb *urb)
+static void qt2_process_read_urb(struct urb *urb)
{
struct usb_serial *serial;
struct qt2_serial_private *serial_priv;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 8894665cd61..de958c5b52e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -914,7 +914,7 @@ static int sierra_port_probe(struct usb_serial_port *port)
/* This is really the usb-serial port number of the interface
* rather than the interface number.
*/
- ifnum = port->number - serial->minor;
+ ifnum = port->port_number;
himemoryp = &typeA_interface_list;
}
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 5b62dbbdf99..e5750be4905 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -323,7 +323,7 @@ static int get_serial_info(struct usb_serial_port *port,
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- tmp.line = port->serial->minor;
+ tmp.line = port->minor;
tmp.port = 0;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e581c2549a5..7182bb774b7 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -477,7 +477,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
tport->tp_msr = 0;
tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
@@ -619,7 +619,7 @@ static void ti_close(struct usb_serial_port *port)
kfifo_reset_out(&tport->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__);
status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
@@ -777,7 +777,7 @@ static void ti_set_termios(struct tty_struct *tty,
tcflag_t cflag, iflag;
int baud;
int status;
- int port_number = port->number - port->serial->minor;
+ int port_number = port->port_number;
unsigned int mcr;
cflag = tty->termios.c_cflag;
@@ -1263,7 +1263,7 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
int size, status;
struct ti_device *tdev = tport->tp_tdev;
struct usb_serial_port *port = tport->tp_port;
- int port_number = port->number - port->serial->minor;
+ int port_number = port->port_number;
struct ti_port_status *data;
size = sizeof(struct ti_port_status);
@@ -1309,8 +1309,8 @@ static int ti_get_serial_info(struct ti_port *tport,
memset(&ret_serial, 0, sizeof(ret_serial));
ret_serial.type = PORT_16550A;
- ret_serial.line = port->serial->minor;
- ret_serial.port = port->number - port->serial->minor;
+ ret_serial.line = port->minor;
+ ret_serial.port = port->port_number;
ret_serial.flags = tport->tp_flags;
ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 5f6b1ff9d29..cb27fcb2fc9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -37,11 +37,15 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/kfifo.h>
+#include <linux/idr.h>
#include "pl2303.h"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
#define DRIVER_DESC "USB Serial Driver core"
+#define USB_SERIAL_TTY_MAJOR 188
+#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
+
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
the MODULE_DEVICE_TABLE declarations in each serial driver
cause the "hotplug" program to pull in whatever module is necessary
@@ -49,81 +53,75 @@
drivers depend on it.
*/
-static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+static DEFINE_IDR(serial_minors);
static DEFINE_MUTEX(table_lock);
static LIST_HEAD(usb_serial_driver_list);
/*
- * Look up the serial structure. If it is found and it hasn't been
- * disconnected, return with its disc_mutex held and its refcount
- * incremented. Otherwise return NULL.
+ * Look up the serial port structure. If it is found and it hasn't been
+ * disconnected, return with the parent usb_serial structure's disc_mutex held
+ * and its refcount incremented. Otherwise return NULL.
*/
-struct usb_serial *usb_serial_get_by_index(unsigned index)
+struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
{
struct usb_serial *serial;
+ struct usb_serial_port *port;
mutex_lock(&table_lock);
- serial = serial_table[index];
-
- if (serial) {
- mutex_lock(&serial->disc_mutex);
- if (serial->disconnected) {
- mutex_unlock(&serial->disc_mutex);
- serial = NULL;
- } else {
- kref_get(&serial->kref);
- }
+ port = idr_find(&serial_minors, minor);
+ if (!port)
+ goto exit;
+
+ serial = port->serial;
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected) {
+ mutex_unlock(&serial->disc_mutex);
+ port = NULL;
+ } else {
+ kref_get(&serial->kref);
}
+exit:
mutex_unlock(&table_lock);
- return serial;
+ return port;
}
-static struct usb_serial *get_free_serial(struct usb_serial *serial,
- int num_ports, unsigned int *minor)
+static int allocate_minors(struct usb_serial *serial, int num_ports)
{
+ struct usb_serial_port *port;
unsigned int i, j;
- int good_spot;
+ int minor;
dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
- *minor = 0;
mutex_lock(&table_lock);
- for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
- if (serial_table[i])
- continue;
-
- good_spot = 1;
- for (j = 1; j <= num_ports-1; ++j)
- if ((i+j >= SERIAL_TTY_MINORS) || (serial_table[i+j])) {
- good_spot = 0;
- i += j;
- break;
- }
- if (good_spot == 0)
- continue;
-
- *minor = i;
- j = 0;
- dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor);
- for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
- serial_table[i] = serial;
- serial->port[j++]->number = i;
- }
- mutex_unlock(&table_lock);
- return serial;
+ for (i = 0; i < num_ports; ++i) {
+ port = serial->port[i];
+ minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL);
+ if (minor < 0)
+ goto error;
+ port->minor = minor;
+ port->port_number = i;
}
+ serial->minors_reserved = 1;
mutex_unlock(&table_lock);
- return NULL;
+ return 0;
+error:
+ /* unwind the already allocated minors */
+ for (j = 0; j < i; ++j)
+ idr_remove(&serial_minors, serial->port[j]->minor);
+ mutex_unlock(&table_lock);
+ return minor;
}
-static void return_serial(struct usb_serial *serial)
+static void release_minors(struct usb_serial *serial)
{
int i;
mutex_lock(&table_lock);
for (i = 0; i < serial->num_ports; ++i)
- serial_table[serial->minor + i] = NULL;
+ idr_remove(&serial_minors, serial->port[i]->minor);
mutex_unlock(&table_lock);
+ serial->minors_reserved = 0;
}
static void destroy_serial(struct kref *kref)
@@ -135,8 +133,8 @@ static void destroy_serial(struct kref *kref)
serial = to_usb_serial(kref);
/* return the minor range that this device had */
- if (serial->minor != SERIAL_TTY_NO_MINOR)
- return_serial(serial);
+ if (serial->minors_reserved)
+ release_minors(serial);
if (serial->attached && serial->type->release)
serial->type->release(serial);
@@ -185,13 +183,11 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
struct usb_serial_port *port;
int retval = -ENODEV;
- serial = usb_serial_get_by_index(idx);
- if (!serial)
+ port = usb_serial_port_get_by_minor(idx);
+ if (!port)
return retval;
- port = serial->port[idx - serial->minor];
- if (!port)
- goto error_no_port;
+ serial = port->serial;
if (!try_module_get(serial->type->driver.owner))
goto error_module_get;
@@ -218,7 +214,6 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
error_get_interface:
module_put(serial->type->driver.owner);
error_module_get:
- error_no_port:
usb_serial_put(serial);
mutex_unlock(&serial->disc_mutex);
return retval;
@@ -452,14 +447,16 @@ static int serial_break(struct tty_struct *tty, int break_state)
static int serial_proc_show(struct seq_file *m, void *v)
{
struct usb_serial *serial;
+ struct usb_serial_port *port;
int i;
char tmp[40];
seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
- for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
- serial = usb_serial_get_by_index(i);
- if (serial == NULL)
+ for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
+ port = usb_serial_port_get_by_minor(i);
+ if (port == NULL)
continue;
+ serial = port->serial;
seq_printf(m, "%d:", i);
if (serial->type->driver.owner)
@@ -471,7 +468,7 @@ static int serial_proc_show(struct seq_file *m, void *v)
le16_to_cpu(serial->dev->descriptor.idVendor),
le16_to_cpu(serial->dev->descriptor.idProduct));
seq_printf(m, " num_ports:%d", serial->num_ports);
- seq_printf(m, " port:%d", i - serial->minor + 1);
+ seq_printf(m, " port:%d", port->port_number);
usb_make_path(serial->dev, tmp, sizeof(tmp));
seq_printf(m, " path:%s", tmp);
@@ -613,7 +610,7 @@ static struct usb_serial *create_serial(struct usb_device *dev,
serial->interface = usb_get_intf(interface);
kref_init(&serial->kref);
mutex_init(&serial->disc_mutex);
- serial->minor = SERIAL_TTY_NO_MINOR;
+ serial->minors_reserved = 0;
return serial;
}
@@ -722,7 +719,6 @@ static int usb_serial_probe(struct usb_interface *interface,
struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
struct usb_serial_driver *type = NULL;
int retval;
- unsigned int minor;
int buffer_size;
int i;
int j;
@@ -1039,16 +1035,15 @@ static int usb_serial_probe(struct usb_interface *interface,
*/
serial->disconnected = 1;
- if (get_free_serial(serial, num_ports, &minor) == NULL) {
- dev_err(ddev, "No more free serial devices\n");
+ if (allocate_minors(serial, num_ports)) {
+ dev_err(ddev, "No more free serial minor numbers\n");
goto probe_error;
}
- serial->minor = minor;
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
- dev_set_name(&port->dev, "ttyUSB%d", port->number);
+ dev_set_name(&port->dev, "ttyUSB%d", port->minor);
dev_dbg(ddev, "registering %s", dev_name(&port->dev));
device_enable_async_suspend(&port->dev);
@@ -1059,7 +1054,7 @@ static int usb_serial_probe(struct usb_interface *interface,
serial->disconnected = 0;
- usb_serial_console_init(minor);
+ usb_serial_console_init(serial->port[0]->minor);
exit:
module_put(type->driver.owner);
return 0;
@@ -1223,17 +1218,13 @@ static struct usb_driver usb_serial_driver = {
static int __init usb_serial_init(void)
{
- int i;
int result;
- usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS);
+ usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS);
if (!usb_serial_tty_driver)
return -ENOMEM;
/* Initialize our global data */
- for (i = 0; i < SERIAL_TTY_MINORS; ++i)
- serial_table[i] = NULL;
-
result = bus_register(&usb_serial_bus_type);
if (result) {
pr_err("%s - registering bus driver failed\n", __func__);
@@ -1242,7 +1233,7 @@ static int __init usb_serial_init(void)
usb_serial_tty_driver->driver_name = "usbserial";
usb_serial_tty_driver->name = "ttyUSB";
- usb_serial_tty_driver->major = SERIAL_TTY_MAJOR;
+ usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
usb_serial_tty_driver->minor_start = 0;
usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index ece326ef63a..8257d30c407 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -124,8 +124,8 @@ static int get_serial_info(struct usb_serial_port *port,
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- tmp.line = port->serial->minor;
- tmp.port = port->number;
+ tmp.line = port->minor;
+ tmp.port = port->port_number;
tmp.baud_base = tty_get_baud_rate(port->port.tty);
tmp.close_delay = port->port.close_delay / 10;
tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 347caad47a1..36a7740e827 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -461,8 +461,8 @@ static int whiteheat_ioctl(struct tty_struct *tty,
case TIOCGSERIAL:
memset(&serstruct, 0, sizeof(serstruct));
serstruct.type = PORT_16654;
- serstruct.line = port->serial->minor;
- serstruct.port = port->number;
+ serstruct.line = port->minor;
+ serstruct.port = port->port_number;
serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo);
serstruct.custom_divisor = 0;
@@ -626,7 +626,7 @@ static int firm_open(struct usb_serial_port *port)
{
struct whiteheat_simple open_command;
- open_command.port = port->number - port->serial->minor + 1;
+ open_command.port = port->port_number + 1;
return firm_send_command(port, WHITEHEAT_OPEN,
(__u8 *)&open_command, sizeof(open_command));
}
@@ -636,7 +636,7 @@ static int firm_close(struct usb_serial_port *port)
{
struct whiteheat_simple close_command;
- close_command.port = port->number - port->serial->minor + 1;
+ close_command.port = port->port_number + 1;
return firm_send_command(port, WHITEHEAT_CLOSE,
(__u8 *)&close_command, sizeof(close_command));
}
@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty)
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios.c_cflag;
- port_settings.port = port->number - port->serial->minor + 1;
+ port_settings.port = port->port_number + 1;
/* get the byte size */
switch (cflag & CSIZE) {
@@ -726,7 +726,7 @@ static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
{
struct whiteheat_set_rdb rts_command;
- rts_command.port = port->number - port->serial->minor + 1;
+ rts_command.port = port->port_number + 1;
rts_command.state = onoff;
return firm_send_command(port, WHITEHEAT_SET_RTS,
(__u8 *)&rts_command, sizeof(rts_command));
@@ -737,7 +737,7 @@ static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
{
struct whiteheat_set_rdb dtr_command;
- dtr_command.port = port->number - port->serial->minor + 1;
+ dtr_command.port = port->port_number + 1;
dtr_command.state = onoff;
return firm_send_command(port, WHITEHEAT_SET_DTR,
(__u8 *)&dtr_command, sizeof(dtr_command));
@@ -748,7 +748,7 @@ static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
{
struct whiteheat_set_rdb break_command;
- break_command.port = port->number - port->serial->minor + 1;
+ break_command.port = port->port_number + 1;
break_command.state = onoff;
return firm_send_command(port, WHITEHEAT_SET_BREAK,
(__u8 *)&break_command, sizeof(break_command));
@@ -759,7 +759,7 @@ static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
{
struct whiteheat_purge purge_command;
- purge_command.port = port->number - port->serial->minor + 1;
+ purge_command.port = port->port_number + 1;
purge_command.what = rxtx;
return firm_send_command(port, WHITEHEAT_PURGE,
(__u8 *)&purge_command, sizeof(purge_command));
@@ -770,7 +770,7 @@ static int firm_get_dtr_rts(struct usb_serial_port *port)
{
struct whiteheat_simple get_dr_command;
- get_dr_command.port = port->number - port->serial->minor + 1;
+ get_dr_command.port = port->port_number + 1;
return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
(__u8 *)&get_dr_command, sizeof(get_dr_command));
}
@@ -780,7 +780,7 @@ static int firm_report_tx_done(struct usb_serial_port *port)
{
struct whiteheat_simple close_command;
- close_command.port = port->number - port->serial->minor + 1;
+ close_command.port = port->port_number + 1;
return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
(__u8 *)&close_command, sizeof(close_command));
}
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 77a2ddfe648..6636a583da1 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -249,11 +249,7 @@ static void nand_init_ecc(void) {
/* compute 3-byte ecc on 256 bytes */
static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
int i, j, a;
- unsigned char par, bit, bits[8];
-
- par = 0;
- for (j = 0; j < 8; j++)
- bits[j] = 0;
+ unsigned char par = 0, bit, bits[8] = {0};
/* collect 16 checksum bits */
for (i = 0; i < 256; i++) {
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 732027f3320..073a2c32ccc 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -219,11 +219,7 @@ static void nand_init_ecc(void) {
/* compute 3-byte ecc on 256 bytes */
static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
int i, j, a;
- unsigned char par, bit, bits[8];
-
- par = 0;
- for (j = 0; j < 8; j++)
- bits[j] = 0;
+ unsigned char par = 0, bit, bits[8] = {0};
/* collect 16 checksum bits */
for (i = 0; i < 256; i++) {
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index 0db0a919d72..675384dabfe 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -13,7 +13,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/usb/ch9.h>
+#include <linux/usb/of.h>
#include <linux/usb/otg.h>
const char *usb_otg_state_string(enum usb_otg_state state)
@@ -79,4 +81,37 @@ const char *usb_state_string(enum usb_device_state state)
}
EXPORT_SYMBOL_GPL(usb_state_string);
+#ifdef CONFIG_OF
+static const char *const usb_dr_modes[] = {
+ [USB_DR_MODE_UNKNOWN] = "",
+ [USB_DR_MODE_HOST] = "host",
+ [USB_DR_MODE_PERIPHERAL] = "peripheral",
+ [USB_DR_MODE_OTG] = "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ const char *dr_mode;
+ int err, i;
+
+ err = of_property_read_string(np, "dr_mode", &dr_mode);
+ if (err < 0)
+ return USB_DR_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+ if (!strcmp(dr_mode, usb_dr_modes[i]))
+ return i;
+
+ return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 1d365316960..33a12788f9c 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -455,8 +455,8 @@ static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
dev_err(dev, "KEEPALIVE: device %u timed out\n",
wusb_dev->addr);
__wusbhc_dev_disconnect(wusbhc, wusb_port);
- } else if (time_after(jiffies, wusb_dev->entry_ts + tt/2)) {
- /* Approaching timeout cut out, need to refresh */
+ } else if (time_after(jiffies, wusb_dev->entry_ts + tt/3)) {
+ /* Approaching timeout cut off, need to refresh */
ie->bDeviceAddress[keep_alives++] = wusb_dev->addr;
}
}
@@ -1062,7 +1062,7 @@ int wusbhc_devconnect_start(struct wusbhc *wusbhc)
wusbhc->wuie_host_info = hi;
queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
- (wusbhc->trust_timeout*CONFIG_HZ)/1000/2);
+ msecs_to_jiffies(wusbhc->trust_timeout / 2));
return 0;
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
index b8c72583c04..b71760c8d3a 100644
--- a/drivers/usb/wusbcore/mmc.c
+++ b/drivers/usb/wusbcore/mmc.c
@@ -195,6 +195,7 @@ int wusbhc_start(struct wusbhc *wusbhc)
struct device *dev = wusbhc->dev;
WARN_ON(wusbhc->wuie_host_info != NULL);
+ BUG_ON(wusbhc->uwb_rc == NULL);
result = wusbhc_rsv_establish(wusbhc);
if (result < 0) {
@@ -214,9 +215,9 @@ int wusbhc_start(struct wusbhc *wusbhc)
dev_err(dev, "error starting security in the HC: %d\n", result);
goto error_sec_start;
}
- /* FIXME: the choice of the DNTS parameters is somewhat
- * arbitrary */
- result = wusbhc->set_num_dnts(wusbhc, 0, 15);
+
+ result = wusbhc->set_num_dnts(wusbhc, wusbhc->dnts_interval,
+ wusbhc->dnts_num_slots);
if (result < 0) {
dev_err(dev, "Cannot set DNTS parameters: %d\n", result);
goto error_set_num_dnts;
@@ -276,12 +277,38 @@ int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
}
wusbhc->chid = *chid;
}
+
+ /* register with UWB if we haven't already since we are about to start
+ the radio. */
+ if ((chid) && (wusbhc->uwb_rc == NULL)) {
+ wusbhc->uwb_rc = uwb_rc_get_by_grandpa(wusbhc->dev->parent);
+ if (wusbhc->uwb_rc == NULL) {
+ result = -ENODEV;
+ dev_err(wusbhc->dev, "Cannot get associated UWB Host Controller\n");
+ goto error_rc_get;
+ }
+
+ result = wusbhc_pal_register(wusbhc);
+ if (result < 0) {
+ dev_err(wusbhc->dev, "Cannot register as a UWB PAL\n");
+ goto error_pal_register;
+ }
+ }
mutex_unlock(&wusbhc->mutex);
if (chid)
result = uwb_radio_start(&wusbhc->pal);
else
uwb_radio_stop(&wusbhc->pal);
+
+ return result;
+
+error_pal_register:
+ uwb_rc_put(wusbhc->uwb_rc);
+ wusbhc->uwb_rc = NULL;
+error_rc_get:
+ mutex_unlock(&wusbhc->mutex);
+
return result;
}
EXPORT_SYMBOL_GPL(wusbhc_chid_set);
diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c
index d0b172c5ecc..59e100c2eb5 100644
--- a/drivers/usb/wusbcore/pal.c
+++ b/drivers/usb/wusbcore/pal.c
@@ -45,10 +45,11 @@ int wusbhc_pal_register(struct wusbhc *wusbhc)
}
/**
- * wusbhc_pal_register - unregister the WUSB HC as a UWB PAL
+ * wusbhc_pal_unregister - unregister the WUSB HC as a UWB PAL
* @wusbhc: the WUSB HC
*/
void wusbhc_pal_unregister(struct wusbhc *wusbhc)
{
- uwb_pal_unregister(&wusbhc->pal);
+ if (wusbhc->uwb_rc)
+ uwb_pal_unregister(&wusbhc->pal);
}
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
index 6f4fafdc240..ead79f79392 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/usb/wusbcore/reservation.c
@@ -80,6 +80,9 @@ int wusbhc_rsv_establish(struct wusbhc *wusbhc)
struct uwb_dev_addr bcid;
int ret;
+ if (rc == NULL)
+ return -ENODEV;
+
rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc);
if (rsv == NULL)
return -ENOMEM;
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index 59ff254dfb6..bdb0cc3046b 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -393,26 +393,6 @@ int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
}
EXPORT_SYMBOL_GPL(wusbhc_rh_control);
-int wusbhc_rh_suspend(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
- usb_hcd, wusbhc);
- /* dump_stack(); */
- return -ENOSYS;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_suspend);
-
-int wusbhc_rh_resume(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
- usb_hcd, wusbhc);
- /* dump_stack(); */
- return -ENOSYS;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_resume);
-
int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
{
struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c
index f67f7f1e6df..ada4e087062 100644
--- a/drivers/usb/wusbcore/wa-nep.c
+++ b/drivers/usb/wusbcore/wa-nep.c
@@ -134,9 +134,10 @@ static void wa_notif_dispatch(struct work_struct *ws)
case WA_NOTIF_TRANSFER:
wa_handle_notif_xfer(wa, notif_hdr);
break;
+ case HWA_NOTIF_BPST_ADJ:
+ break; /* no action needed for BPST ADJ. */
case DWA_NOTIF_RWAKE:
case DWA_NOTIF_PORTSTATUS:
- case HWA_NOTIF_BPST_ADJ:
/* FIXME: unimplemented WA NOTIFs */
/* fallthru */
default:
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index f0d546c5a08..9a595c1ed86 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -251,8 +251,8 @@ static int __rpipe_reset(struct wahc *wa, unsigned index)
static struct usb_wireless_ep_comp_descriptor epc0 = {
.bLength = sizeof(epc0),
.bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP,
-/* .bMaxBurst = 1, */
- .bMaxSequence = 31,
+ .bMaxBurst = 1,
+ .bMaxSequence = 2,
};
/*
@@ -317,6 +317,7 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
struct device *dev = &wa->usb_iface->dev;
struct usb_device *usb_dev = urb->dev;
struct usb_wireless_ep_comp_descriptor *epcd;
+ u32 ack_window, epcd_max_sequence;
u8 unauth;
epcd = rpipe_epc_find(dev, ep);
@@ -333,8 +334,11 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
rpipe->descr.wBlocks = cpu_to_le16(16); /* given */
/* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */
rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize);
- rpipe->descr.bHSHubAddress = 0; /* reserved: zero */
- rpipe->descr.bHSHubPort = wusb_port_no_to_idx(urb->dev->portnum);
+
+ rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int,
+ epcd->bMaxBurst, 16U), 1U);
+ rpipe->descr.hwa_bDeviceInfoIndex =
+ wusb_port_no_to_idx(urb->dev->portnum);
/* FIXME: use maximum speed as supported or recommended by device */
rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ?
UWB_PHY_RATE_53 : UWB_PHY_RATE_200;
@@ -344,26 +348,26 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
le16_to_cpu(rpipe->descr.wRPipeIndex),
usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed);
- /* see security.c:wusb_update_address() */
- if (unlikely(urb->dev->devnum == 0x80))
- rpipe->descr.bDeviceAddress = 0;
- else
- rpipe->descr.bDeviceAddress = urb->dev->devnum | unauth;
+ rpipe->descr.hwa_reserved = 0;
+
rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress;
/* FIXME: bDataSequence */
rpipe->descr.bDataSequence = 0;
- /* FIXME: dwCurrentWindow */
- rpipe->descr.dwCurrentWindow = cpu_to_le32(1);
- /* FIXME: bMaxDataSequence */
- rpipe->descr.bMaxDataSequence = epcd->bMaxSequence - 1;
+
+ /* start with base window of hwa_bMaxBurst bits starting at 0. */
+ ack_window = 0xFFFFFFFF >> (32 - rpipe->descr.hwa_bMaxBurst);
+ rpipe->descr.dwCurrentWindow = cpu_to_le32(ack_window);
+ epcd_max_sequence = max(min_t(unsigned int,
+ epcd->bMaxSequence, 32U), 2U);
+ rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1;
rpipe->descr.bInterval = ep->desc.bInterval;
/* FIXME: bOverTheAirInterval */
rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */
/* FIXME: xmit power & preamble blah blah */
- rpipe->descr.bmAttribute = ep->desc.bmAttributes & 0x03;
+ rpipe->descr.bmAttribute = (ep->desc.bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK);
/* rpipe->descr.bmCharacteristics RO */
- /* FIXME: bmRetryOptions */
- rpipe->descr.bmRetryOptions = 15;
+ rpipe->descr.bmRetryOptions = (wa->wusb->retry_count & 0xF);
/* FIXME: use for assessing link quality? */
rpipe->descr.wNumTransactionErrors = 0;
result = __rpipe_set_descr(wa, &rpipe->descr,
@@ -387,10 +391,8 @@ static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa,
const struct usb_host_endpoint *ep,
const struct urb *urb, gfp_t gfp)
{
- int result = 0; /* better code for lack of companion? */
+ int result = 0;
struct device *dev = &wa->usb_iface->dev;
- struct usb_device *usb_dev = urb->dev;
- u8 unauth = (usb_dev->wusb && !usb_dev->authenticated) ? 0x80 : 0;
u8 portnum = wusb_port_no_to_idx(urb->dev->portnum);
#define AIM_CHECK(rdf, val, text) \
@@ -403,13 +405,10 @@ static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa,
WARN_ON(1); \
} \
} while (0)
- AIM_CHECK(wMaxPacketSize, cpu_to_le16(ep->desc.wMaxPacketSize),
- "(%u vs %u)");
- AIM_CHECK(bHSHubPort, portnum, "(%u vs %u)");
+ AIM_CHECK(hwa_bDeviceInfoIndex, portnum, "(%u vs %u)");
AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ?
UWB_PHY_RATE_53 : UWB_PHY_RATE_200,
"(%u vs %u)");
- AIM_CHECK(bDeviceAddress, urb->dev->devnum | unauth, "(%u vs %u)");
AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)");
AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)");
AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)");
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 6ef94bce8c0..16968c89949 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -85,6 +85,7 @@
#include <linux/hash.h>
#include <linux/ratelimit.h>
#include <linux/export.h>
+#include <linux/scatterlist.h>
#include "wa-hc.h"
#include "wusbhc.h"
@@ -442,8 +443,7 @@ static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer,
goto error;
}
xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize;
- xfer->segs = (urb->transfer_buffer_length + xfer->seg_size - 1)
- / xfer->seg_size;
+ xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, xfer->seg_size);
if (xfer->segs >= WA_SEGS_MAX) {
dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n",
(int)(urb->transfer_buffer_length / xfer->seg_size),
@@ -627,6 +627,86 @@ static void wa_seg_cb(struct urb *urb)
}
}
+/* allocate an SG list to store bytes_to_transfer bytes and copy the
+ * subset of the in_sg that matches the buffer subset
+ * we are about to transfer. */
+static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg,
+ const unsigned int bytes_transferred,
+ const unsigned int bytes_to_transfer, unsigned int *out_num_sgs)
+{
+ struct scatterlist *out_sg;
+ unsigned int bytes_processed = 0, offset_into_current_page_data = 0,
+ nents;
+ struct scatterlist *current_xfer_sg = in_sg;
+ struct scatterlist *current_seg_sg, *last_seg_sg;
+
+ /* skip previously transferred pages. */
+ while ((current_xfer_sg) &&
+ (bytes_processed < bytes_transferred)) {
+ bytes_processed += current_xfer_sg->length;
+
+ /* advance the sg if current segment starts on or past the
+ next page. */
+ if (bytes_processed <= bytes_transferred)
+ current_xfer_sg = sg_next(current_xfer_sg);
+ }
+
+ /* the data for the current segment starts in current_xfer_sg.
+ calculate the offset. */
+ if (bytes_processed > bytes_transferred) {
+ offset_into_current_page_data = current_xfer_sg->length -
+ (bytes_processed - bytes_transferred);
+ }
+
+ /* calculate the number of pages needed by this segment. */
+ nents = DIV_ROUND_UP((bytes_to_transfer +
+ offset_into_current_page_data +
+ current_xfer_sg->offset),
+ PAGE_SIZE);
+
+ out_sg = kmalloc((sizeof(struct scatterlist) * nents), GFP_ATOMIC);
+ if (out_sg) {
+ sg_init_table(out_sg, nents);
+
+ /* copy the portion of the incoming SG that correlates to the
+ * data to be transferred by this segment to the segment SG. */
+ last_seg_sg = current_seg_sg = out_sg;
+ bytes_processed = 0;
+
+ /* reset nents and calculate the actual number of sg entries
+ needed. */
+ nents = 0;
+ while ((bytes_processed < bytes_to_transfer) &&
+ current_seg_sg && current_xfer_sg) {
+ unsigned int page_len = min((current_xfer_sg->length -
+ offset_into_current_page_data),
+ (bytes_to_transfer - bytes_processed));
+
+ sg_set_page(current_seg_sg, sg_page(current_xfer_sg),
+ page_len,
+ current_xfer_sg->offset +
+ offset_into_current_page_data);
+
+ bytes_processed += page_len;
+
+ last_seg_sg = current_seg_sg;
+ current_seg_sg = sg_next(current_seg_sg);
+ current_xfer_sg = sg_next(current_xfer_sg);
+
+ /* only the first page may require additional offset. */
+ offset_into_current_page_data = 0;
+ nents++;
+ }
+
+ /* update num_sgs and terminate the list since we may have
+ * concatenated pages. */
+ sg_mark_end(last_seg_sg);
+ *out_num_sgs = nents;
+ }
+
+ return out_sg;
+}
+
/*
* Allocate the segs array and initialize each of them
*
@@ -663,9 +743,9 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
dto_epd->bEndpointAddress),
&seg->xfer_hdr, xfer_hdr_size,
wa_seg_cb, seg);
- buf_itr_size = buf_size > xfer->seg_size ?
- xfer->seg_size : buf_size;
+ buf_itr_size = min(buf_size, xfer->seg_size);
if (xfer->is_inbound == 0 && buf_size > 0) {
+ /* outbound data. */
seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (seg->dto_urb == NULL)
goto error_dto_alloc;
@@ -679,9 +759,42 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
xfer->urb->transfer_dma + buf_itr;
seg->dto_urb->transfer_flags |=
URB_NO_TRANSFER_DMA_MAP;
- } else
- seg->dto_urb->transfer_buffer =
- xfer->urb->transfer_buffer + buf_itr;
+ seg->dto_urb->transfer_buffer = NULL;
+ seg->dto_urb->sg = NULL;
+ seg->dto_urb->num_sgs = 0;
+ } else {
+ /* do buffer or SG processing. */
+ seg->dto_urb->transfer_flags &=
+ ~URB_NO_TRANSFER_DMA_MAP;
+ /* this should always be 0 before a resubmit. */
+ seg->dto_urb->num_mapped_sgs = 0;
+
+ if (xfer->urb->transfer_buffer) {
+ seg->dto_urb->transfer_buffer =
+ xfer->urb->transfer_buffer +
+ buf_itr;
+ seg->dto_urb->sg = NULL;
+ seg->dto_urb->num_sgs = 0;
+ } else {
+ /* allocate an SG list to store seg_size
+ bytes and copy the subset of the
+ xfer->urb->sg that matches the
+ buffer subset we are about to read.
+ */
+ seg->dto_urb->sg =
+ wa_xfer_create_subset_sg(
+ xfer->urb->sg,
+ buf_itr, buf_itr_size,
+ &(seg->dto_urb->num_sgs));
+
+ if (!(seg->dto_urb->sg)) {
+ seg->dto_urb->num_sgs = 0;
+ goto error_sg_alloc;
+ }
+
+ seg->dto_urb->transfer_buffer = NULL;
+ }
+ }
seg->dto_urb->transfer_buffer_length = buf_itr_size;
}
seg->status = WA_SEG_READY;
@@ -690,6 +803,8 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
}
return 0;
+error_sg_alloc:
+ kfree(seg->dto_urb);
error_dto_alloc:
kfree(xfer->seg[cnt]);
cnt--;
@@ -1026,7 +1141,8 @@ int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep,
unsigned long my_flags;
unsigned cant_sleep = irqs_disabled() | in_atomic();
- if (urb->transfer_buffer == NULL
+ if ((urb->transfer_buffer == NULL)
+ && (urb->sg == NULL)
&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
&& urb->transfer_buffer_length != 0) {
dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb);
@@ -1261,7 +1377,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer)
seg = xfer->seg[seg_idx];
rpipe = xfer->ep->hcpriv;
usb_status = xfer_result->bTransferStatus;
- dev_dbg(dev, "xfer %p#%u: bTransferStatus 0x%02x (seg %u)\n",
+ dev_dbg(dev, "xfer %p#%u: bTransferStatus 0x%02x (seg status %u)\n",
xfer, seg_idx, usb_status, seg->status);
if (seg->status == WA_SEG_ABORTED
|| seg->status == WA_SEG_ERROR) /* already handled */
@@ -1276,8 +1392,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer)
}
if (usb_status & 0x80) {
seg->result = wa_xfer_status_to_errno(usb_status);
- dev_err(dev, "DTI: xfer %p#%u failed (0x%02x)\n",
- xfer, seg->index, usb_status);
+ dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n",
+ xfer, xfer->id, seg->index, usb_status);
goto error_complete;
}
/* FIXME: we ignore warnings, tally them for stats */
@@ -1286,18 +1402,47 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer)
if (xfer->is_inbound) { /* IN data phase: read to buffer */
seg->status = WA_SEG_DTI_PENDING;
BUG_ON(wa->buf_in_urb->status == -EINPROGRESS);
+ /* this should always be 0 before a resubmit. */
+ wa->buf_in_urb->num_mapped_sgs = 0;
+
if (xfer->is_dma) {
wa->buf_in_urb->transfer_dma =
xfer->urb->transfer_dma
- + seg_idx * xfer->seg_size;
+ + (seg_idx * xfer->seg_size);
wa->buf_in_urb->transfer_flags
|= URB_NO_TRANSFER_DMA_MAP;
+ wa->buf_in_urb->transfer_buffer = NULL;
+ wa->buf_in_urb->sg = NULL;
+ wa->buf_in_urb->num_sgs = 0;
} else {
- wa->buf_in_urb->transfer_buffer =
- xfer->urb->transfer_buffer
- + seg_idx * xfer->seg_size;
+ /* do buffer or SG processing. */
wa->buf_in_urb->transfer_flags
&= ~URB_NO_TRANSFER_DMA_MAP;
+
+ if (xfer->urb->transfer_buffer) {
+ wa->buf_in_urb->transfer_buffer =
+ xfer->urb->transfer_buffer
+ + (seg_idx * xfer->seg_size);
+ wa->buf_in_urb->sg = NULL;
+ wa->buf_in_urb->num_sgs = 0;
+ } else {
+ /* allocate an SG list to store seg_size bytes
+ and copy the subset of the xfer->urb->sg
+ that matches the buffer subset we are
+ about to read. */
+ wa->buf_in_urb->sg = wa_xfer_create_subset_sg(
+ xfer->urb->sg,
+ seg_idx * xfer->seg_size,
+ le32_to_cpu(
+ xfer_result->dwTransferLength),
+ &(wa->buf_in_urb->num_sgs));
+
+ if (!(wa->buf_in_urb->sg)) {
+ wa->buf_in_urb->num_sgs = 0;
+ goto error_sg_alloc;
+ }
+ wa->buf_in_urb->transfer_buffer = NULL;
+ }
}
wa->buf_in_urb->transfer_buffer_length =
le32_to_cpu(xfer_result->dwTransferLength);
@@ -1330,6 +1475,8 @@ error_submit_buf_in:
dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n",
xfer, seg_idx, result);
seg->result = result;
+ kfree(wa->buf_in_urb->sg);
+error_sg_alloc:
error_complete:
seg->status = WA_SEG_ERROR;
xfer->segs_done++;
@@ -1381,6 +1528,10 @@ static void wa_buf_in_cb(struct urb *urb)
unsigned long flags;
u8 done = 0;
+ /* free the sg if it was used. */
+ kfree(urb->sg);
+ urb->sg = NULL;
+
switch (urb->status) {
case 0:
spin_lock_irqsave(&xfer->lock, flags);
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 0faca16df76..742c607d1fa 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -75,12 +75,11 @@ static ssize_t wusb_trust_timeout_store(struct device *dev,
result = -EINVAL;
goto out;
}
- /* FIXME: maybe we should check for range validity? */
- wusbhc->trust_timeout = trust_timeout;
+ wusbhc->trust_timeout = min_t(unsigned, trust_timeout, 500);
cancel_delayed_work(&wusbhc->keep_alive_timer);
flush_workqueue(wusbd);
queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
- (trust_timeout * CONFIG_HZ)/1000/2);
+ msecs_to_jiffies(wusbhc->trust_timeout / 2));
out:
return result < 0 ? result : size;
}
@@ -176,11 +175,72 @@ static ssize_t wusb_phy_rate_store(struct device *dev,
}
static DEVICE_ATTR(wusb_phy_rate, 0644, wusb_phy_rate_show, wusb_phy_rate_store);
+static ssize_t wusb_dnts_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+
+ return sprintf(buf, "num slots: %d\ninterval: %dms\n",
+ wusbhc->dnts_num_slots, wusbhc->dnts_interval);
+}
+
+static ssize_t wusb_dnts_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+ uint8_t num_slots, interval;
+ ssize_t result;
+
+ result = sscanf(buf, "%hhu %hhu", &num_slots, &interval);
+
+ if (result != 2)
+ return -EINVAL;
+
+ wusbhc->dnts_num_slots = num_slots;
+ wusbhc->dnts_interval = interval;
+
+ return size;
+}
+static DEVICE_ATTR(wusb_dnts, 0644, wusb_dnts_show, wusb_dnts_store);
+
+static ssize_t wusb_retry_count_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+
+ return sprintf(buf, "%d\n", wusbhc->retry_count);
+}
+
+static ssize_t wusb_retry_count_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+ uint8_t retry_count;
+ ssize_t result;
+
+ result = sscanf(buf, "%hhu", &retry_count);
+
+ if (result != 1)
+ return -EINVAL;
+
+ wusbhc->retry_count = max_t(uint8_t, retry_count, WUSB_RETRY_COUNT_MAX);
+
+ return size;
+}
+static DEVICE_ATTR(wusb_retry_count, 0644, wusb_retry_count_show,
+ wusb_retry_count_store);
+
/* Group all the WUSBHC attributes */
static struct attribute *wusbhc_attrs[] = {
&dev_attr_wusb_trust_timeout.attr,
&dev_attr_wusb_chid.attr,
&dev_attr_wusb_phy_rate.attr,
+ &dev_attr_wusb_dnts.attr,
+ &dev_attr_wusb_retry_count.attr,
NULL,
};
@@ -206,8 +266,12 @@ int wusbhc_create(struct wusbhc *wusbhc)
{
int result = 0;
+ /* set defaults. These can be overwritten using sysfs attributes. */
wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS;
wusbhc->phy_rate = UWB_PHY_RATE_INVALID - 1;
+ wusbhc->dnts_num_slots = 4;
+ wusbhc->dnts_interval = 2;
+ wusbhc->retry_count = WUSB_RETRY_COUNT_INFINITE;
mutex_init(&wusbhc->mutex);
result = wusbhc_mmcie_create(wusbhc);
@@ -261,13 +325,7 @@ int wusbhc_b_create(struct wusbhc *wusbhc)
goto error_create_attr_group;
}
- result = wusbhc_pal_register(wusbhc);
- if (result < 0)
- goto error_pal_register;
return 0;
-
-error_pal_register:
- sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
error_create_attr_group:
return result;
}
@@ -393,7 +451,8 @@ EXPORT_SYMBOL_GPL(wusbhc_giveback_urb);
*/
void wusbhc_reset_all(struct wusbhc *wusbhc)
{
- uwb_rc_reset_all(wusbhc->uwb_rc);
+ if (wusbhc->uwb_rc)
+ uwb_rc_reset_all(wusbhc->uwb_rc);
}
EXPORT_SYMBOL_GPL(wusbhc_reset_all);
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 3a2d09162e7..711b1952b11 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -69,6 +69,8 @@
* zone 0.
*/
#define WUSB_CHANNEL_STOP_DELAY_MS 8
+#define WUSB_RETRY_COUNT_MAX 15
+#define WUSB_RETRY_COUNT_INFINITE 0
/**
* Wireless USB device
@@ -252,6 +254,9 @@ struct wusbhc {
unsigned trust_timeout; /* in jiffies */
struct wusb_ckhdid chid;
uint8_t phy_rate;
+ uint8_t dnts_num_slots;
+ uint8_t dnts_interval;
+ uint8_t retry_count;
struct wuie_host_info *wuie_host_info;
struct mutex mutex; /* locks everything else */
@@ -399,8 +404,6 @@ extern void wusbhc_rh_destroy(struct wusbhc *);
extern int wusbhc_rh_status_data(struct usb_hcd *, char *);
extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16);
-extern int wusbhc_rh_suspend(struct usb_hcd *);
-extern int wusbhc_rh_resume(struct usb_hcd *);
extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned);
/* MMC handling */
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index 3fbcf789dfa..16ada8341c4 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -67,14 +67,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg,
} else
dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
- spin_lock_bh(&rc->rsvs_lock);
+ spin_lock_irq(&rc->rsvs_lock);
if (rc->set_drp_ie_pending > 1) {
rc->set_drp_ie_pending = 0;
uwb_rsv_queue_update(rc);
} else {
rc->set_drp_ie_pending = 0;
}
- spin_unlock_bh(&rc->rsvs_lock);
+ spin_unlock_irq(&rc->rsvs_lock);
}
/**
diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c
index 86ed7e61e59..457f31d99bf 100644
--- a/drivers/uwb/est.c
+++ b/drivers/uwb/est.c
@@ -436,7 +436,6 @@ ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
unsigned long flags;
unsigned itr;
u16 type_event_high, event;
- u8 *ptr = (u8 *) rceb;
read_lock_irqsave(&uwb_est_lock, flags);
size = -ENOSPC;
@@ -453,12 +452,12 @@ ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
if (size != -ENOENT)
goto out;
}
- dev_dbg(dev, "event 0x%02x/%04x/%02x: no handlers available; "
- "RCEB %02x %02x %02x %02x\n",
+ dev_dbg(dev,
+ "event 0x%02x/%04x/%02x: no handlers available; RCEB %4ph\n",
(unsigned) rceb->bEventType,
(unsigned) le16_to_cpu(rceb->wEvent),
(unsigned) rceb->bEventContext,
- ptr[0], ptr[1], ptr[2], ptr[3]);
+ rceb);
size = -ENOENT;
out:
read_unlock_irqrestore(&uwb_est_lock, flags);
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index 810c90ae2c5..0621abef9b4 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -900,6 +900,12 @@ static const struct usb_device_id hwarc_id_table[] = {
/* Intel i1480 (using firmware 1.3PA2-20070828) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02),
.driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+ /* Alereon 5310 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x01, 0x02),
+ .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+ /* Alereon 5611 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x01, 0x02),
+ .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
/* Generic match for the Radio Control interface */
{ USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
{ },
diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c
index 8ee7d90a8c6..690577d2a35 100644
--- a/drivers/uwb/pal.c
+++ b/drivers/uwb/pal.c
@@ -44,10 +44,12 @@ int uwb_pal_register(struct uwb_pal *pal)
int ret;
if (pal->device) {
+ /* create a link to the uwb_rc in the PAL device's directory. */
ret = sysfs_create_link(&pal->device->kobj,
&rc->uwb_dev.dev.kobj, "uwb_rc");
if (ret < 0)
return ret;
+ /* create a link to the PAL in the UWB device's directory. */
ret = sysfs_create_link(&rc->uwb_dev.dev.kobj,
&pal->device->kobj, pal->name);
if (ret < 0) {
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
index f4ae05f78c4..738e8a8cb81 100644
--- a/drivers/uwb/rsv.c
+++ b/drivers/uwb/rsv.c
@@ -872,7 +872,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc)
*/
void uwb_rsv_sched_update(struct uwb_rc *rc)
{
- spin_lock_bh(&rc->rsvs_lock);
+ spin_lock_irq(&rc->rsvs_lock);
if (!delayed_work_pending(&rc->rsv_update_work)) {
if (rc->set_drp_ie_pending > 0) {
rc->set_drp_ie_pending++;
@@ -881,7 +881,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc)
uwb_rsv_queue_update(rc);
}
unlock:
- spin_unlock_bh(&rc->rsvs_lock);
+ spin_unlock_irq(&rc->rsvs_lock);
}
/*
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index a7494bf1008..9a103b100f1 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -55,7 +55,8 @@ static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc)
static inline void __uwb_rc_put(struct uwb_rc *rc)
{
- uwb_dev_put(&rc->uwb_dev);
+ if (rc)
+ uwb_dev_put(&rc->uwb_dev);
}
extern int uwb_rc_reset(struct uwb_rc *rc);
diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c
index f48093e649e..c9df8ba97da 100644
--- a/drivers/uwb/whci.c
+++ b/drivers/uwb/whci.c
@@ -253,19 +253,7 @@ static struct pci_driver whci_driver = {
.remove = whci_remove,
};
-static int __init whci_init(void)
-{
- return pci_register_driver(&whci_driver);
-}
-
-static void __exit whci_exit(void)
-{
- pci_unregister_driver(&whci_driver);
-}
-
-module_init(whci_init);
-module_exit(whci_exit);
-
+module_pci_driver(whci_driver);
MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator");
MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
MODULE_LICENSE("GPL");
diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h
index 85dcc709f7e..1d1b6ef871f 100644
--- a/include/linux/platform_data/usb3503.h
+++ b/include/linux/platform_data/usb3503.h
@@ -3,6 +3,10 @@
#define USB3503_I2C_NAME "usb3503"
+#define USB3503_OFF_PORT1 (1 << 1)
+#define USB3503_OFF_PORT2 (1 << 2)
+#define USB3503_OFF_PORT3 (1 << 3)
+
enum usb3503_mode {
USB3503_MODE_UNKNOWN,
USB3503_MODE_HUB,
@@ -11,6 +15,7 @@ enum usb3503_mode {
struct usb3503_platform_data {
enum usb3503_mode initial_mode;
+ u8 port_off_mask;
int gpio_intn;
int gpio_connect;
int gpio_reset;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index a0bee5a28d1..a232b7ece1f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -394,6 +394,22 @@ enum usb_port_connect_type {
};
/*
+ * USB 2.0 Link Power Management (LPM) parameters.
+ */
+struct usb2_lpm_parameters {
+ /* Best effort service latency indicate how long the host will drive
+ * resume on an exit from L1.
+ */
+ unsigned int besl;
+
+ /* Timeout value in microseconds for the L1 inactivity (LPM) timer.
+ * When the timer counts to zero, the parent hub will initiate a LPM
+ * transition to L1.
+ */
+ int timeout;
+};
+
+/*
* USB 3.0 Link Power Management (LPM) parameters.
*
* PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit.
@@ -468,6 +484,7 @@ struct usb3_lpm_parameters {
* @wusb: device is Wireless USB
* @lpm_capable: device supports LPM
* @usb2_hw_lpm_capable: device can perform USB2 hardware LPM
+ * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM
* @usb2_hw_lpm_enabled: USB2 hardware LPM enabled
* @usb3_lpm_enabled: USB3 hardware LPM enabled
* @string_langid: language ID for strings
@@ -487,6 +504,7 @@ struct usb3_lpm_parameters {
* specific data for the device.
* @slot_id: Slot ID assigned by xHCI
* @removable: Device can be physically removed from this port
+ * @l1_params: best effor service latency for USB2 L1 LPM state, and L1 timeout.
* @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout.
* @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout.
* @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm()
@@ -538,6 +556,7 @@ struct usb_device {
unsigned wusb:1;
unsigned lpm_capable:1;
unsigned usb2_hw_lpm_capable:1;
+ unsigned usb2_hw_lpm_besl_capable:1;
unsigned usb2_hw_lpm_enabled:1;
unsigned usb3_lpm_enabled:1;
int string_langid;
@@ -566,6 +585,7 @@ struct usb_device {
struct wusb_dev *wusb_dev;
int slot_id;
enum usb_device_removable removable;
+ struct usb2_lpm_parameters l1_params;
struct usb3_lpm_parameters u1_params;
struct usb3_lpm_parameters u2_params;
unsigned lpm_disable_count;
@@ -717,6 +737,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface,
extern int usb_match_one_id(struct usb_interface *interface,
const struct usb_device_id *id);
+extern int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *));
extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
int minor);
extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825dde82..25629948c84 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -7,32 +7,33 @@
#include <linux/usb/otg.h>
-struct ci13xxx;
-struct ci13xxx_platform_data {
+struct ci_hdrc;
+struct ci_hdrc_platform_data {
const char *name;
/* offset of the capability registers */
uintptr_t capoffset;
unsigned power_budget;
struct usb_phy *phy;
+ enum usb_phy_interface phy_mode;
unsigned long flags;
-#define CI13XXX_REGS_SHARED BIT(0)
-#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
-#define CI13XXX_PULLUP_ON_VBUS BIT(2)
-#define CI13XXX_DISABLE_STREAMING BIT(3)
-
-#define CI13XXX_CONTROLLER_RESET_EVENT 0
-#define CI13XXX_CONTROLLER_STOPPED_EVENT 1
- void (*notify_event) (struct ci13xxx *ci, unsigned event);
+#define CI_HDRC_REGS_SHARED BIT(0)
+#define CI_HDRC_REQUIRE_TRANSCEIVER BIT(1)
+#define CI_HDRC_PULLUP_ON_VBUS BIT(2)
+#define CI_HDRC_DISABLE_STREAMING BIT(3)
+ enum usb_dr_mode dr_mode;
+#define CI_HDRC_CONTROLLER_RESET_EVENT 0
+#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
+ void (*notify_event) (struct ci_hdrc *ci, unsigned event);
};
/* Default offset of capability registers */
#define DEF_CAPOFFSET 0x100
-/* Add ci13xxx device */
-struct platform_device *ci13xxx_add_device(struct device *dev,
+/* Add ci hdrc device */
+struct platform_device *ci_hdrc_add_device(struct device *dev,
struct resource *res, int nres,
- struct ci13xxx_platform_data *platdata);
-/* Remove ci13xxx device */
-void ci13xxx_remove_device(struct platform_device *pdev);
+ struct ci_hdrc_platform_data *platdata);
+/* Remove ci hdrc device */
+void ci_hdrc_remove_device(struct platform_device *pdev);
#endif
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index f5f5c7dfda9..1e88377e22f 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -218,6 +218,7 @@ struct hc_driver {
#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
#define HCD_USB11 0x0010 /* USB 1.1 */
#define HCD_USB2 0x0020 /* USB 2.0 */
+#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
#define HCD_USB3 0x0040 /* USB 3.0 */
#define HCD_MASK 0x0070
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 00000000000..a0ef405368b
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,32 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+
+#if IS_ENABLED(CONFIG_OF)
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_PHY)
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 291e01ba32e..154332b7c8c 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -92,4 +92,11 @@ otg_start_srp(struct usb_otg *otg)
/* for OTG controller drivers (and maybe other stuff) */
extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+enum usb_dr_mode {
+ USB_DR_MODE_UNKNOWN,
+ USB_DR_MODE_HOST,
+ USB_DR_MODE_PERIPHERAL,
+ USB_DR_MODE_OTG,
+};
+
#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 6b5978f5763..44036808bf0 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
#include <linux/notifier.h>
#include <linux/usb.h>
+enum usb_phy_interface {
+ USBPHY_INTERFACE_MODE_UNKNOWN,
+ USBPHY_INTERFACE_MODE_UTMI,
+ USBPHY_INTERFACE_MODE_UTMIW,
+ USBPHY_INTERFACE_MODE_ULPI,
+ USBPHY_INTERFACE_MODE_SERIAL,
+ USBPHY_INTERFACE_MODE_HSIC,
+};
+
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 302ddf55d2d..d528b804515 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -19,10 +19,6 @@
#include <linux/sysrq.h>
#include <linux/kfifo.h>
-#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
-#define SERIAL_TTY_MINORS 254 /* loads of devices :) */
-#define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */
-
/* The maximum number of ports one device can grab at once */
#define MAX_NUM_PORTS 8
@@ -37,7 +33,8 @@
* @serial: pointer back to the struct usb_serial owner of this port.
* @port: pointer to the corresponding tty_port for this port.
* @lock: spinlock to grab when updating portions of this structure.
- * @number: the number of the port (the minor number).
+ * @minor: the minor number of the port
+ * @port_number: the struct usb_serial port number of this port (starts at 0)
* @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
* @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
* @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
@@ -80,7 +77,8 @@ struct usb_serial_port {
struct usb_serial *serial;
struct tty_port port;
spinlock_t lock;
- unsigned char number;
+ u32 minor;
+ u8 port_number;
unsigned char *interrupt_in_buffer;
struct urb *interrupt_in_urb;
@@ -140,7 +138,6 @@ static inline void usb_set_serial_port_data(struct usb_serial_port *port,
* @dev: pointer to the struct usb_device for this device
* @type: pointer to the struct usb_serial_driver for this device
* @interface: pointer to the struct usb_interface for this device
- * @minor: the starting minor number for this device
* @num_ports: the number of ports this device has
* @num_interrupt_in: number of interrupt in endpoints we have
* @num_interrupt_out: number of interrupt out endpoints we have
@@ -159,7 +156,7 @@ struct usb_serial {
unsigned char disconnected:1;
unsigned char suspending:1;
unsigned char attached:1;
- unsigned char minor;
+ unsigned char minors_reserved:1;
unsigned char num_ports;
unsigned char num_port_pointers;
char num_interrupt_in;
@@ -319,7 +316,7 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
#endif
/* Functions needed by other parts of the usbserial core */
-extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
+extern struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor);
extern void usb_serial_put(struct usb_serial *serial);
extern int usb_serial_generic_open(struct tty_struct *tty,
struct usb_serial_port *port);
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 1b7519a8c0b..d2ca919a5b7 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -42,6 +42,7 @@ enum tegra_usb_phy_port_speed {
enum tegra_usb_phy_mode {
TEGRA_USB_PHY_MODE_DEVICE,
TEGRA_USB_PHY_MODE_HOST,
+ TEGRA_USB_PHY_MODE_OTG,
};
struct tegra_xtal_freq;
@@ -61,14 +62,10 @@ struct tegra_usb_phy {
struct device *dev;
bool is_legacy_phy;
bool is_ulpi_phy;
- void (*set_pts)(struct usb_phy *x, u8 pts_val);
- void (*set_phcd)(struct usb_phy *x, bool enable);
+ int reset_gpio;
};
-struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
- void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode,
- void (*set_pts)(struct usb_phy *x, u8 pts_val),
- void (*set_phcd)(struct usb_phy *x, bool enable));
+struct usb_phy *tegra_usb_get_phy(struct device_node *dn);
void tegra_usb_phy_preresume(struct usb_phy *phy);
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
index f9dec37f617..6be985b2a43 100644
--- a/include/linux/usb/wusb-wa.h
+++ b/include/linux/usb/wusb-wa.h
@@ -92,11 +92,20 @@ struct usb_rpipe_descriptor {
__le16 wRPipeIndex;
__le16 wRequests;
__le16 wBlocks; /* rw if 0 */
- __le16 wMaxPacketSize; /* rw? */
- u8 bHSHubAddress; /* reserved: 0 */
- u8 bHSHubPort; /* ??? FIXME ??? */
+ __le16 wMaxPacketSize; /* rw */
+ union {
+ u8 dwa_bHSHubAddress; /* rw: DWA. */
+ u8 hwa_bMaxBurst; /* rw: HWA. */
+ };
+ union {
+ u8 dwa_bHSHubPort; /* rw: DWA. */
+ u8 hwa_bDeviceInfoIndex; /* rw: HWA. */
+ };
u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */
- u8 bDeviceAddress; /* rw: Target device address */
+ union {
+ u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */
+ u8 hwa_reserved; /* rw: HWA. */
+ };
u8 bEndpointAddress; /* rw: Target EP address */
u8 bDataSequence; /* ro: Current Data sequence */
__le32 dwCurrentWindow; /* ro */