diff options
98 files changed, 2325 insertions, 1410 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 9f9de3e9582..2a3a7ea5958 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -3,7 +3,7 @@ # see Documentation/kbuild/kconfig-language.txt. # -mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration" +mainmenu "Blackfin Kernel Configuration" config MMU bool @@ -29,10 +29,6 @@ config ZONE_DMA bool default y -config BFIN - bool - default y - config SEMAPHORE_SLEEPERS bool default y @@ -50,7 +46,7 @@ config GENERIC_HARDIRQS default y config GENERIC_IRQ_PROBE - bool + bool default y config GENERIC_TIME @@ -69,11 +65,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config IRQCHIP_DEMUX_GPIO - bool - depends on (BF52x || BF53x || BF561 || BF54x) - default y - source "init/Kconfig" source "kernel/Kconfig.preempt" @@ -140,6 +131,11 @@ config BF544 help BF544 Processor Support. +config BF547 + bool "BF547" + help + BF547 Processor Support. + config BF548 bool "BF548" help @@ -166,11 +162,11 @@ choice config BF_REV_0_0 bool "0.0" - depends on (BF549 || BF527) + depends on (BF52x || BF54x) config BF_REV_0_1 - bool "0.2" - depends on (BF549 || BF527) + bool "0.1" + depends on (BF52x || BF54x) config BF_REV_0_2 bool "0.2" @@ -208,7 +204,7 @@ config BF53x config BF54x bool - depends on (BF542 || BF544 || BF548 || BF549) + depends on (BF542 || BF544 || BF547 || BF548 || BF549) default y config BFIN_DUAL_CORE @@ -221,95 +217,6 @@ config BFIN_SINGLE_CORE depends on !BFIN_DUAL_CORE default y -choice - prompt "System type" - default BFIN533_STAMP - help - Do NOT change the board here. Please use the top level - configuration to ensure that all the other settings are - correct. - -config BFIN527_EZKIT - bool "BF527-EZKIT" - depends on (BF522 || BF525 || BF527) - help - BF533-EZKIT-LITE board Support. - -config BFIN533_EZKIT - bool "BF533-EZKIT" - depends on (BF533 || BF532 || BF531) - help - BF533-EZKIT-LITE board Support. - -config BFIN533_STAMP - bool "BF533-STAMP" - depends on (BF533 || BF532 || BF531) - help - BF533-STAMP board Support. - -config BFIN537_STAMP - bool "BF537-STAMP" - depends on (BF537 || BF536 || BF534) - help - BF537-STAMP board Support. - -config BFIN533_BLUETECHNIX_CM - bool "Bluetechnix CM-BF533" - depends on (BF533) - help - CM-BF533 support for EVAL- and DEV-Board. - -config BFIN537_BLUETECHNIX_CM - bool "Bluetechnix CM-BF537" - depends on (BF537) - help - CM-BF537 support for EVAL- and DEV-Board. - -config BFIN548_EZKIT - bool "BF548-EZKIT" - depends on (BF548 || BF549) - help - BFIN548-EZKIT board Support. - -config BFIN561_BLUETECHNIX_CM - bool "Bluetechnix CM-BF561" - depends on (BF561) - help - CM-BF561 support for EVAL- and DEV-Board. - -config BFIN561_EZKIT - bool "BF561-EZKIT" - depends on (BF561) - help - BF561-EZKIT-LITE board Support. - -config BFIN561_TEPLA - bool "BF561-TEPLA" - depends on (BF561) - help - BF561-TEPLA board Support. - -config PNAV10 - bool "PNAV 1.0 board" - depends on (BF537) - help - PNAV 1.0 board Support. - -config H8606_HVSISTEMAS - bool "HV Sistemas H8606" - depends on (BF532) - help - HV Sistemas H8606 board support. - -config GENERIC_BOARD - bool "Custom" - depends on (BF537 || BF536 \ - || BF534 || BF561 || BF535 || BF533 || BF532 || BF531) - help - GENERIC or Custom board Support. - -endchoice - config MEM_GENERIC_BOARD bool depends on GENERIC_BOARD @@ -389,9 +296,9 @@ config BFIN_KERNEL_CLOCK configuration. config PLL_BYPASS - bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK - default n + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n config CLKIN_HALF bool "Half Clock In" @@ -468,11 +375,11 @@ config MAX_VCO_HZ default 500000000 if BF534 default 400000000 if BF536 default 600000000 if BF537 - default 533000000 if BF538 - default 533000000 if BF539 + default 533333333 if BF538 + default 533333333 if BF539 default 600000000 if BF542 - default 533000000 if BF544 - default 533000000 if BF549 + default 533333333 if BF544 + default 533333333 if BF549 default 600000000 if BF561 config MIN_VCO_HZ @@ -481,7 +388,7 @@ config MIN_VCO_HZ config MAX_SCLK_HZ int - default 133000000 + default 133333333 config MIN_SCLK_HZ int @@ -959,6 +866,20 @@ config BANK_3 default 0x99B3 endmenu +config EBIU_MBSCTLVAL + hex "EBIU Bank Select Control Register" + depends on BF54x + default 0 + +config EBIU_MODEVAL + hex "Flash Memory Mode Control Register" + depends on BF54x + default 1 + +config EBIU_FCTLVAL + hex "Flash Memory Bank Control Register" + depends on BF54x + default 6 endmenu ############################################################################# @@ -1075,174 +996,7 @@ source "fs/Kconfig" source "kernel/Kconfig.instrumentation" -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_HWERR - bool "Hardware error interrupt debugging" - depends on DEBUG_KERNEL - help - When enabled, the hardware error interrupt is never disabled, and - will happen immediately when an error condition occurs. This comes - at a slight cost in code size, but is necessary if you are getting - hardware error interrupts and need to know where they are coming - from. - -config DEBUG_ICACHE_CHECK - bool "Check Instruction cache coherency" - depends on DEBUG_KERNEL - depends on DEBUG_HWERR - help - Say Y here if you are getting weird unexplained errors. This will - ensure that icache is what SDRAM says it should be by doing a - byte wise comparison between SDRAM and instruction cache. This - also relocates the irq_panic() function to L1 memory, (which is - un-cached). - -config DEBUG_HUNT_FOR_ZERO - bool "Catch NULL pointer reads/writes" - default y - help - Say Y here to catch reads/writes to anywhere in the memory range - from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in - catching common programming errors such as NULL pointer dereferences. - - Misbehaving applications will be killed (generate a SEGV) while the - kernel will trigger a panic. - - Enabling this option will take up an extra entry in CPLB table. - Otherwise, there is no extra overhead. - -config DEBUG_BFIN_HWTRACE_ON - bool "Turn on Blackfin's Hardware Trace" - default y - help - All Blackfins include a Trace Unit which stores a history of the last - 16 changes in program flow taken by the program sequencer. The history - allows the user to recreate the program sequencer’s recent path. This - can be handy when an application dies - we print out the execution - path of how it got to the offending instruction. - - By turning this off, you may save a tiny amount of power. - -choice - prompt "Omit loop Tracing" - default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF - depends on DEBUG_BFIN_HWTRACE_ON - help - The trace buffer can be configured to omit recording of changes in - program flow that match either the last entry or one of the last - two entries. Omitting one of these entries from the record prevents - the trace buffer from overflowing because of any sort of loop (for, do - while, etc) in the program. - - Because zero-overhead Hardware loops are not recorded in the trace buffer, - this feature can be used to prevent trace overflow from loops that - are nested four deep. - -config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF - bool "Trace all Loops" - help - The trace buffer records all changes of flow - -config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE - bool "Compress single-level loops" - help - The trace buffer does not record single loops - helpful if trace - is spinning on a while or do loop. - -config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO - bool "Compress two-level loops" - help - The trace buffer does not record loops two levels deep. Helpful if - the trace is spinning in a nested loop - -endchoice - -config DEBUG_BFIN_HWTRACE_COMPRESSION - int - depends on DEBUG_BFIN_HWTRACE_ON - default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF - default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE - default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO - - -config DEBUG_BFIN_HWTRACE_EXPAND - bool "Expand Trace Buffer greater than 16 entries" - depends on DEBUG_BFIN_HWTRACE_ON - default n - help - By selecting this option, every time the 16 hardware entries in - the Blackfin's HW Trace buffer are full, the kernel will move them - into a software buffer, for dumping when there is an issue. This - has a great impact on performance, (an interrupt every 16 change of - flows) and should normally be turned off, except in those nasty - debugging sessions - -config DEBUG_BFIN_HWTRACE_EXPAND_LEN - int "Size of Trace buffer (in power of 2k)" - range 0 4 - depends on DEBUG_BFIN_HWTRACE_EXPAND - default 1 - help - This sets the size of the software buffer that the trace information - is kept in. - 0 for (2^0) 1k, or 256 entries, - 1 for (2^1) 2k, or 512 entries, - 2 for (2^2) 4k, or 1024 entries, - 3 for (2^3) 8k, or 2048 entries, - 4 for (2^4) 16k, or 4096 entries - -config DEBUG_BFIN_NO_KERN_HWTRACE - bool "Trace user apps (turn off hwtrace in kernel)" - depends on DEBUG_BFIN_HWTRACE_ON - default n - help - Some pieces of the kernel contain a lot of flow changes which can - quickly fill up the hardware trace buffer. When debugging crashes, - the hardware trace may indicate that the problem lies in kernel - space when in reality an application is buggy. - |