diff options
47 files changed, 15 insertions, 8806 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 07de7e19b4c..27e67a98b7b 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -413,8 +413,6 @@ serial-console.txt - how to set up Linux with a serial line console as the default. sgi-ioc4.txt - description of the SGI IOC4 PCI (multi function) device. -sgi-visws.txt - - short blurb on the SGI Visual Workstations. sh/ - directory with info on porting Linux to a new architecture. smsc_ece1099.txt diff --git a/Documentation/sgi-visws.txt b/Documentation/sgi-visws.txt deleted file mode 100644 index 7ff0811ca2b..00000000000 --- a/Documentation/sgi-visws.txt +++ /dev/null @@ -1,13 +0,0 @@ - -The SGI Visual Workstations (models 320 and 540) are based around -the Cobalt, Lithium, and Arsenic ASICs. The Cobalt ASIC is the -main system ASIC which interfaces the 1-4 IA32 cpus, the memory -system, and the I/O system in the Lithium ASIC. The Cobalt ASIC -also contains the 3D gfx rendering engine which renders to main -system memory -- part of which is used as the frame buffer which -is DMA'ed to a video connector using the Arsenic ASIC. A PIIX4 -chip and NS87307 are used to provide legacy device support (IDE, -serial, floppy, and parallel). - -The Visual Workstation chipset largely conforms to the PC architecture -with some notable exceptions such as interrupt handling. diff --git a/Documentation/sound/oss/vwsnd b/Documentation/sound/oss/vwsnd deleted file mode 100644 index 4c6cbdb3c54..00000000000 --- a/Documentation/sound/oss/vwsnd +++ /dev/null @@ -1,293 +0,0 @@ -vwsnd - Sound driver for the Silicon Graphics 320 and 540 Visual -Workstations' onboard audio. - -Copyright 1999 Silicon Graphics, Inc. All rights reserved. - - -At the time of this writing, March 1999, there are two models of -Visual Workstation, the 320 and the 540. This document only describes -those models. Future Visual Workstation models may have different -sound capabilities, and this driver will probably not work on those -boxes. - -The Visual Workstation has an Analog Devices AD1843 "SoundComm" audio -codec chip. The AD1843 is accessed through the Cobalt I/O ASIC, also -known as Lithium. This driver programs both chips. - -============================================================================== -QUICK CONFIGURATION - - # insmod soundcore - # insmod vwsnd - -============================================================================== -I/O CONNECTIONS - -On the Visual Workstation, only three of the AD1843 inputs are hooked -up. The analog line in jacks are connected to the AD1843's AUX1 -input. The CD audio lines are connected to the AD1843's AUX2 input. -The microphone jack is connected to the AD1843's MIC input. The mic -jack is mono, but the signal is delivered to both the left and right -MIC inputs. You can record in stereo from the mic input, but you will -get the same signal on both channels (within the limits of A/D -accuracy). Full scale on the Line input is +/- 2.0 V. Full scale on -the MIC input is 20 dB less, or +/- 0.2 V. - -The AD1843's LOUT1 outputs are connected to the Line Out jacks. The -AD1843's HPOUT outputs are connected to the speaker/headphone jack. -LOUT2 is not connected. Line out's maximum level is +/- 2.0 V peak to -peak. The speaker/headphone out's maximum is +/- 4.0 V peak to peak. - -The AD1843's PCM input channel and one of its output channels (DAC1) -are connected to Lithium. The other output channel (DAC2) is not -connected. - -============================================================================== -CAPABILITIES - -The AD1843 has PCM input and output (Pulse Code Modulation, also known -as wavetable). PCM input and output can be mono or stereo in any of -four formats. The formats are 16 bit signed and 8 bit unsigned, -u-Law, and A-Law format. Any sample rate from 4 KHz to 49 KHz is -available, in 1 Hz increments. - -The AD1843 includes an analog mixer that can mix all three input -signals (line, mic and CD) into the analog outputs. The mixer has a -separate gain control and mute switch for each input. - -There are two outputs, line out and speaker/headphone out. They -always produce the same signal, and the speaker always has 3 dB more -gain than the line out. The speaker/headphone output can be muted, -but this driver does not export that function. - -The hardware can sync audio to the video clock, but this driver does -not have a way to specify syncing to video. - -============================================================================== -PROGRAMMING - -This section explains the API supported by the driver. Also see the -Open Sound Programming Guide at http://www.opensound.com/pguide/ . -This section assumes familiarity with that document. - -The driver has two interfaces, an I/O interface and a mixer interface. -There is no MIDI or sequencer capability. - -============================================================================== -PROGRAMMING PCM I/O - -The I/O interface is usually accessed as /dev/audio or /dev/dsp. -Using the standard Open Sound System (OSS) ioctl calls, the sample -rate, number of channels, and sample format may be set within the -limitations described above. The driver supports triggering. It also -supports getting the input and output pointers with one-sample -accuracy. - -The SNDCTL_DSP_GETCAP ioctl returns these capabilities. - - DSP_CAP_DUPLEX - driver supports full duplex. - - DSP_CAP_TRIGGER - driver supports triggering. - - DSP_CAP_REALTIME - values returned by SNDCTL_DSP_GETIPTR - and SNDCTL_DSP_GETOPTR are accurate to a few samples. - -Memory mapping (mmap) is not implemented. - -The driver permits subdivided fragment sizes from 64 to 4096 bytes. -The number of fragments can be anything from 3 fragments to however -many fragments fit into 124 kilobytes. It is up to the user to -determine how few/small fragments can be used without introducing -glitches with a given workload. Linux is not realtime, so we can't -promise anything. (sigh...) - -When this driver is switched into or out of mu-Law or A-Law mode on -output, it may produce an audible click. This is unavoidable. To -prevent clicking, use signed 16-bit mode instead, and convert from -mu-Law or A-Law format in software. - -============================================================================== -PROGRAMMING THE MIXER INTERFACE - -The mixer interface is usually accessed as /dev/mixer. It is accessed -through ioctls. The mixer allows the application to control gain or -mute several audio signal paths, and also allows selection of the -recording source. - -Each of the constants described here can be read using the -MIXER_READ(SOUND_MIXER_xxx) ioctl. Those that are not read-only can -also be written using the MIXER_WRITE(SOUND_MIXER_xxx) ioctl. In most -cases, <sys/soundcard.h> defines constants SOUND_MIXER_READ_xxx and -SOUND_MIXER_WRITE_xxx which work just as well. - -SOUND_MIXER_CAPS Read-only - -This is a mask of optional driver capabilities that are implemented. -This driver's only capability is SOUND_CAP_EXCL_INPUT, which means -that only one recording source can be active at a time. - -SOUND_MIXER_DEVMASK Read-only - -This is a mask of the sound channels. This driver's channels are PCM, -LINE, MIC, CD, and RECLEV. - -SOUND_MIXER_STEREODEVS Read-only - -This is a mask of which sound channels are capable of stereo. All -channels are capable of stereo. (But see caveat on MIC input in I/O -CONNECTIONS section above). - -SOUND_MIXER_OUTMASK Read-only - -This is a mask of channels that route inputs through to outputs. -Those are LINE, MIC, and CD. - -SOUND_MIXER_RECMASK Read-only - -This is a mask of channels that can be recording sources. Those are -PCM, LINE, MIC, CD. - -SOUND_MIXER_PCM Default: 0x5757 (0 dB) - -This is the gain control for PCM output. The left and right channel -gain are controlled independently. This gain control has 64 levels, -which range from -82.5 dB to +12.0 dB in 1.5 dB steps. Those 64 -levels are mapped onto 100 levels at the ioctl, see below. - -SOUND_MIXER_LINE Default: 0x4a4a (0 dB) - -This is the gain control for mixing the Line In source into the -outputs. The left and right channel gain are controlled -independently. This gain control has 32 levels, which range from --34.5 dB to +12.0 dB in 1.5 dB steps. Those 32 levels are mapped onto -100 levels at the ioctl, see below. - -SOUND_MIXER_MIC Default: 0x4a4a (0 dB) - -This is the gain control for mixing the MIC source into the outputs. -The left and right channel gain are controlled independently. This -gain control has 32 levels, which range from -34.5 dB to +12.0 dB in -1.5 dB steps. Those 32 levels are mapped onto 100 levels at the -ioctl, see below. - -SOUND_MIXER_CD Default: 0x4a4a (0 dB) - -This is the gain control for mixing the CD audio source into the -outputs. The left and right channel gain are controlled -independently. This gain control has 32 levels, which range from --34.5 dB to +12.0 dB in 1.5 dB steps. Those 32 levels are mapped onto -100 levels at the ioctl, see below. - -SOUND_MIXER_RECLEV Default: 0 (0 dB) - -This is the gain control for PCM input (RECording LEVel). The left -and right channel gain are controlled independently. This gain -control has 16 levels, which range from 0 dB to +22.5 dB in 1.5 dB -steps. Those 16 levels are mapped onto 100 levels at the ioctl, see -below. - -SOUND_MIXER_RECSRC Default: SOUND_MASK_LINE - -This is a mask of currently selected PCM input sources (RECording -SouRCes). Because the AD1843 can only have a single recording source -at a time, only one bit at a time can be set in this mask. The -allowable values are SOUND_MASK_PCM, SOUND_MASK_LINE, SOUND_MASK_MIC, -or SOUND_MASK_CD. Selecting SOUND_MASK_PCM sets up internal -resampling which is useful for loopback testing and for hardware -sample rate conversion. But software sample rate conversion is -probably faster, so I don't know how useful that is. - -SOUND_MIXER_OUTSRC DEFAULT: SOUND_MASK_LINE|SOUND_MASK_MIC|SOUND_MASK_CD - -This is a mask of sources that are currently passed through to the -outputs. Those sources whose bits are not set are muted. - -============================================================================== -GAIN CONTROL - -There are five gain controls listed above. Each has 16, 32, or 64 -steps. Each control has 1.5 dB of gain per step. Each control is -stereo. - -The OSS defines the argument to a channel gain ioctl as having two -components, left and right, each of which ranges from 0 to 100. The -two components are packed into the same word, with the left side gain -in the least significant byte, and the right side gain in the second -least significant byte. In C, we would say this. - - #include <assert.h> - - ... - - assert(leftgain >= 0 && leftgain <= 100); - assert(rightgain >= 0 && rightgain <= 100); - arg = leftgain | rightgain << 8; - -So each OSS gain control has 101 steps. But the hardware has 16, 32, -or 64 steps. The hardware steps are spread across the 101 OSS steps -nearly evenly. The conversion formulas are like this, given N equals -16, 32, or 64. - - int round = N/2 - 1; - OSS_gain_steps = (hw_gain_steps * 100 + round) / (N - 1); - hw_gain_steps = (OSS_gain_steps * (N - 1) + round) / 100; - -Here is a snippet of C code that will return the left and right gain -of any channel in dB. Pass it one of the predefined gain_desc_t -structures to access any of the five channels' gains. - - typedef struct gain_desc { - float min_gain; - float gain_step; - int nbits; - int chan; - } gain_desc_t; - - const gain_desc_t gain_pcm = { -82.5, 1.5, 6, SOUND_MIXER_PCM }; - const gain_desc_t gain_line = { -34.5, 1.5, 5, SOUND_MIXER_LINE }; - const gain_desc_t gain_mic = { -34.5, 1.5, 5, SOUND_MIXER_MIC }; - const gain_desc_t gain_cd = { -34.5, 1.5, 5, SOUND_MIXER_CD }; - const gain_desc_t gain_reclev = { 0.0, 1.5, 4, SOUND_MIXER_RECLEV }; - - int get_gain_dB(int fd, const gain_desc_t *gp, - float *left, float *right) - { - int word; - int lg, rg; - int mask = (1 << gp->nbits) - 1; - - if (ioctl(fd, MIXER_READ(gp->chan), &word) != 0) - return -1; /* fail */ - lg = word & 0xFF; - rg = word >> 8 & 0xFF; - lg = (lg * mask + mask / 2) / 100; - rg = (rg * mask + mask / 2) / 100; - *left = gp->min_gain + gp->gain_step * lg; - *right = gp->min_gain + gp->gain_step * rg; - return 0; - } - -And here is the corresponding routine to set a channel's gain in dB. - - int set_gain_dB(int fd, const gain_desc_t *gp, float left, float right) - { - float max_gain = - gp->min_gain + (1 << gp->nbits) * gp->gain_step; - float round = gp->gain_step / 2; - int mask = (1 << gp->nbits) - 1; - int word; - int lg, rg; - - if (left < gp->min_gain || right < gp->min_gain) - return EINVAL; - lg = (left - gp->min_gain + round) / gp->gain_step; - rg = (right - gp->min_gain + round) / gp->gain_step; - if (lg >= (1 << gp->nbits) || rg >= (1 << gp->nbits)) - return EINVAL; - lg = (100 * lg + mask / 2) / mask; - rg = (100 * rg + mask / 2) / mask; - word = lg | rg << 8; - - return ioctl(fd, MIXER_WRITE(gp->chan), &word); - } - diff --git a/MAINTAINERS b/MAINTAINERS index c1b982cd52d..b99bbbc4c5d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7840,13 +7840,6 @@ F: Documentation/ia64/serial.txt F: drivers/tty/serial/ioc?_serial.c F: include/linux/ioc?.h -SGI VISUAL WORKSTATION 320 AND 540 -M: Andrey Panin <pazke@donpac.ru> -L: linux-visws-devel@lists.sf.net -W: http://linux-visws.sf.net -S: Maintained for 2.6. -F: Documentation/sgi-visws.txt - SGI XP/XPC/XPNET DRIVER M: Cliff Whickman <cpw@sgi.com> M: Robin Holt <robinmholt@gmail.com> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ac04d980439..f7307174297 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -344,12 +344,9 @@ config X86_EXTENDED_PLATFORM for the following (non-PC) 32 bit x86 platforms: Goldfish (Android emulator) AMD Elan - NUMAQ (IBM/Sequent) RDC R-321x SoC SGI 320/540 (Visual Workstation) STA2X11-based (e.g. Northville) - Summit/EXA (IBM x440) - Unisys ES7000 IA32 series Moorestown MID devices If you have one of these systems, or if you want to build a @@ -487,49 +484,22 @@ config X86_32_NON_STANDARD depends on X86_32 && SMP depends on X86_EXTENDED_PLATFORM ---help--- - This option compiles in the NUMAQ, Summit, bigsmp, ES7000, - STA2X11, default subarchitectures. It is intended for a generic - binary kernel. If you select them all, kernel will probe it - one by one and will fallback to default. + This option compiles in the bigsmp and STA2X11 default + subarchitectures. It is intended for a generic binary + kernel. If you select them all, kernel will probe it one by + one and will fallback to default. # Alphabetically sorted list of Non standard 32 bit platforms -config X86_NUMAQ - bool "NUMAQ (IBM/Sequent)" - depends on X86_32_NON_STANDARD - depends on PCI - select NUMA - select X86_MPPARSE - ---help--- - This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) - NUMA multiquad box. This changes the way that processors are - bootstrapped, and uses Clustered Logical APIC addressing mode instead - of Flat Logical. You will need a new lynxer.elf file to flash your - firmware with - send email to <Martin.Bligh@us.ibm.com>. - config X86_SUPPORTS_MEMORY_FAILURE def_bool y # MCE code calls memory_failure(): depends on X86_MCE # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: - depends on !X86_NUMAQ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE -config X86_VISWS - bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT - depends on X86_32_NON_STANDARD - ---help--- - The SGI Visual Workstation series is an IA32-based workstation - based on SGI systems chips with some legacy PC hardware attached. - - Say Y here to create a kernel to run on the SGI 320 or 540. - - A kernel compiled for the Visual Workstation will run on general - PCs as well. See <file:Documentation/sgi-visws.txt> for details. - config STA2X11 bool "STA2X11 Companion Chip Support" depends on X86_32_NON_STANDARD && PCI @@ -546,20 +516,6 @@ config STA2X11 option is selected the kernel will still be able to boot on standard PC machines. -config X86_SUMMIT - bool "Summit/EXA (IBM x440)" - depends on X86_32_NON_STANDARD - ---help--- - This option is needed for IBM systems that use the Summit/EXA chipset. - In particular, it is needed for the x440. - -config X86_ES7000 - bool "Unisys ES7000 IA32 series" - depends on X86_32_NON_STANDARD && X86_BIGSMP - ---help--- - Support for Unisys ES7000 systems. Say 'Y' here if this kernel is - supposed to run on an IA32-based Unisys ES7000 system. - config X86_32_IRIS tristate "Eurobraille/Iris poweroff module" depends on X86_32 @@ -682,14 +638,6 @@ config MEMTEST memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer N. -config X86_SUMMIT_NUMA - def_bool y - depends on X86_32 && NUMA && X86_32_NON_STANDARD - -config X86_CYCLONE_TIMER - def_bool y - depends on X86_SUMMIT - source "arch/x86/Kconfig.cpu" config HPET_TIMER @@ -818,7 +766,7 @@ config NR_CPUS range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64 default "1" if !SMP default "8192" if MAXSMP - default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000) + default "32" if SMP && X86_BIGSMP default "8" if SMP ---help--- This allows you to specify the maximum number of CPUs which this @@ -882,10 +830,6 @@ config X86_IO_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI -config X86_VISWS_APIC - def_bool y - depends on X86_32 && X86_VISWS - config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" depends on X86_IO_APIC @@ -1103,13 +1047,11 @@ config X86_CPUID choice prompt "High Memory Support" - default HIGHMEM64G if X86_NUMAQ default HIGHMEM4G depends on X86_32 config NOHIGHMEM bool "off" - depends on !X86_NUMAQ ---help--- Linux can use up to 64 Gigabytes of physical memory on x86 systems. However, the address space of 32-bit x86 processors is only 4 @@ -1146,7 +1088,6 @@ config NOHIGHMEM config HIGHMEM4G bool "4GB" - depends on !X86_NUMAQ ---help--- Select this if you have a 32-bit processor and between 1 and 4 gigabytes of physical RAM. @@ -1238,8 +1179,8 @@ config DIRECT_GBPAGES config NUMA bool "Numa Memory Allocation and Scheduler Support" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI)) - default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) + depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP) + default y if X86_BIGSMP ---help--- Enable NUMA (Non Uniform Memory Access) support. @@ -1250,15 +1191,11 @@ config NUMA For 64-bit this is recommended if the system is Intel Core i7 (or later), AMD Opteron, or EM64T NUMA. - For 32-bit this is only needed on (rare) 32-bit-only platforms - that support NUMA topologies, such as NUMAQ / Summit, or if you - boot a 32-bit kernel on a 64-bit NUMA platform. + For 32-bit this is only needed if you boot a 32-bit + kernel on a 64-bit NUMA platform. Otherwise, you should say N. -comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" - depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) - config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" @@ -1300,7 +1237,6 @@ config NODES_SHIFT range 1 10 default "10" if MAXSMP default "6" if X86_64 - default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES ---help--- diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index f3aaf231b4e..6983314c8b3 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -359,7 +359,7 @@ config X86_P6_NOP config X86_TSC def_bool y - depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64 + depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64 config X86_CMPXCHG64 def_bool y diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 2377f5618fb..8dcd35c4c78 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -90,12 +90,6 @@ enum fixed_addresses { FIX_IO_APIC_BASE_0, FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1, #endif -#ifdef CONFIG_X86_VISWS_APIC - FIX_CO_CPU, /* Cobalt timer */ - FIX_CO_APIC, /* Cobalt APIC Redirection Table */ - FIX_LI_PCIA, /* Lithium PCI Bridge A */ - FIX_LI_PCIB, /* Lithium PCI Bridge B */ -#endif FIX_RO_IDT, /* Virtual mapping for read-only IDT */ #ifdef CONFIG_X86_32 FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 67d69b8e2d2..a307b7530e5 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -98,7 +98,6 @@ extern void trace_call_function_single_interrupt(void); #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs)) extern unsigned long io_apic_irqs; -extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 8a9b3e288cb..1ec990bd7dc 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -11,9 +11,6 @@ #ifdef CONFIG_NUMA extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) - -#include <asm/numaq.h> - #endif /* CONFIG_NUMA */ #ifdef CONFIG_DISCONTIGMEM diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 3e6b4920ef5..f5a61795673 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -25,12 +25,6 @@ extern int pic_mode; extern unsigned int def_to_bigsmp; -#ifdef CONFIG_X86_NUMAQ -extern int mp_bus_id_to_node[MAX_MP_BUSSES]; -extern int mp_bus_id_to_local[MAX_MP_BUSSES]; -extern int quad_local_to_mp_bus_id [NR_CPUS/4][4]; -#endif - #else /* CONFIG_X86_64: */ #define MAX_MP_BUSSES 256 diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h deleted file mode 100644 index c3b3c322fd8..00000000000 --- a/arch/x86/include/asm/numaq.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <gone@us.ibm.com> - */ - -#ifndef _ASM_X86_NUMAQ_H -#define _ASM_X86_NUMAQ_H - -#ifdef CONFIG_X86_NUMAQ - -extern int found_numaq; -extern int numaq_numa_init(void); -extern int pci_numaq_init(void); - -extern void *xquad_portio; - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ -#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) - -/* - * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the - */ -#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private - quad space */ - -/* - * Communication area for each processor on lynxer-processor tests. - * - * NOTE: If you change the size of this eachproc structure you need - * to change the definition for EACH_QUAD_SIZE. - */ -struct eachquadmem { - unsigned int priv_mem_start; /* Starting address of this */ - /* quad's private memory. */ - /* This is always 0. */ - /* In MB. */ - unsigned int priv_mem_size; /* Size of this quad's */ - /* private memory. */ - /* In MB. */ - unsigned int low_shrd_mem_strp_start;/* Starting address of this */ - /* quad's low shared block */ - /* (untranslated). */ - /* In MB. */ - unsigned int low_shrd_mem_start; /* Starting address of this */ - /* quad's low shared memory */ - /* (untranslated). */ - /* In MB. */ - unsigned int low_shrd_mem_size; /* Size of this quad's low */ - /* shared memory. */ - /* In MB. */ - unsigned int lmmio_copb_start; /* Starting address of this */ - /* quad's local memory */ - /* mapped I/O in the */ - /* compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_copb_size; /* Size of this quad's local */ - /* memory mapped I/O in the */ - /* compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_nopb_start; /* Starting address of this */ - /* quad's local memory */ - /* mapped I/O in the */ - /* non-compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_nopb_size; /* Size of this quad's local */ - /* memory mapped I/O in the */ - /* non-compatibility OPB. */ - /* In MB. */ - unsigned int io_apic_0_start; /* Starting address of I/O */ - /* APIC 0. */ - unsigned int io_apic_0_sz; /* Size I/O APIC 0. */ - unsigned int io_apic_1_start; /* Starting address of I/O */ - /* APIC 1. */ - unsigned int io_apic_1_sz; /* Size I/O APIC 1. */ - unsigned int hi_shrd_mem_start; /* Starting address of this */ - /* quad's high shared memory.*/ - /* In MB. */ - unsigned int hi_shrd_mem_size; /* Size of this quad's high */ - /* shared memory. */ - /* In MB. */ - unsigned int mps_table_addr; /* Address of this quad's */ - /* MPS tables from BIOS, */ - /* in system space.*/ - unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */ - /* local access of MDC. */ - unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */ - /* remote access of MDC. */ - unsigned int mm_port_io_start; /* Starting address of this */ - /* quad's memory mapped Port */ - /* I/O space. */ - unsigned int mm_port_io_size; /* Size of this quad's memory*/ - /* mapped Port I/O space. */ - unsigned int mm_rmt_io_apic_start; /* Starting address of this */ - /* quad's memory mapped */ - /* remote I/O APIC space. */ - unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/ - /* mapped remote I/O APIC */ - /* space. */ - unsigned int mm_isa_start; /* Starting address of this */ - /* quad's memory mapped ISA */ - /* space (contains MDC */ - /* memory space). */ - unsigned int mm_isa_size; /* Size of this quad's memory*/ - /* mapped ISA space (contains*/ - /* MDC memory space). */ - unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/ - unsigned int lcl_qmi_addr; /* Local addr to access QMI. */ -}; - -/* - * Note: This structure must be NOT be changed unless the multiproc and - * OS are changed to reflect the new structure. - */ -struct sys_cfg_data { - unsigned int quad_id; - unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */ - unsigned int scd_version; /* Version number of this table. */ - unsigned int first_quad_id; - unsigned int quads_present31_0; /* 1 bit for each quad */ - unsigned int quads_present63_32; /* 1 bit for each quad */ - unsigned int config_flags; - unsigned int boot_flags; - unsigned int csr_start_addr; /* Absolute value (not in MB) */ - unsigned int csr_size; /* Absolute value (not in MB) */ - unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */ - unsigned int lcl_apic_size; /* Absolute value (not in MB) */ - unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */ - unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */ - /* may not be totally populated */ - unsigned int split_mem_enbl; /* 0 for no low shared memory */ - unsigned int mmio_sz; /* Size of total system memory mapped I/O */ - /* (in MB). */ - unsigned int quad_spin_lock; /* Spare location used for quad */ - /* bringup. */ - unsigned int nonzero55; /* For checksumming. */ - unsigned int nonzeroaa; /* For checksumming. */ - unsigned int scd_magic_number; - unsigned int system_type; - unsigned int checksum; - /* - * memory configuration area for each quad - */ - struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */ -}; - -void numaq_tsc_disable(void); - -#endif /* CONFIG_X86_NUMAQ */ -#endif /* _ASM_X86_NUMAQ_H */ - diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index d62c9f809bc..9264f04a4c5 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -39,12 +39,6 @@ static inline void vsmp_init(void) { } void setup_bios_corruption_check(void); -#ifdef CONFIG_X86_VISWS -extern void visws_early_detect(void); -#else -static inline void visws_early_detect(void) { } -#endif - extern unsigned long saved_video_mode; extern void reserve_standard_io_resources(void); diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h deleted file mode 100644 index 2edb37637ea..00000000000 --- a/arch/x86/include/asm/visws/cobalt.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _ASM_X86_VISWS_COBALT_H -#define _ASM_X86_VISWS_COBALT_H - -#include <asm/fixmap.h> - -/* - * Cobalt SGI Visual Workstation system ASIC - */ - -#define CO_CPU_NUM_PHYS 0x1e00 -#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2) - -#define CO_CPU_MAX 4 - -#define CO_CPU_PHYS 0xc2000000 -#define CO_APIC_PHYS 0xc4000000 - -/* see set_fixmap() and asm/fixmap.h */ -#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU)) -#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC)) - -/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */ -#define CO_CPU_REV 0x08 -#define CO_CPU_CTRL 0x10 -#define CO_CPU_STAT 0x20 -#define CO_CPU_TIMEVAL 0x30 - -/* CO_CPU_CTRL bits */ -#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */ -#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */ - -/* CO_CPU_STATUS bits */ -#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */ - -/* CO_CPU_TIMEVAL value */ -#define CO_TIME_HZ 100000000 /* Cobalt core rate */ - -/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */ -#define CO_APIC_HI(n) (((n) * 0x10) + 4) -#define CO_APIC_LO(n) ((n) * 0x10) -#define CO_APIC_ID 0x0ffc - -/* CO_APIC_ID bits */ -#define CO_APIC_ENABLE 0x00000100 - -/* CO_APIC_LO bits */ -#define CO_APIC_MASK 0x00010000 /* 0 = enabled */ -#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */ - -/* - * Where things are physically wired to Cobalt - * #defines with no board _<type>_<rev>_ are common to all (thus far) - */ -#define CO_APIC_IDE0 4 -#define CO_APIC_IDE1 2 /* Only on 320 */ - -#define CO_APIC_8259 12 /* serial, floppy, par-l-l */ - -/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */ -#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */ -#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */ - -#define CO_APIC_PIIX4_USB 7 /* this one is weird */ - -/* Lithium PCI Bridge B -- "the one with PIIX4" */ -#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */ -#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */ - -#define CO_APIC_VIDOUT0 16 -#define CO_APIC_VIDOUT1 17 -#define CO_APIC_VIDIN0 18 -#define CO_APIC_VIDIN1 19 - -#define CO_APIC_LI_AUDIO 22 - -#define CO_APIC_AS 24 -#define CO_APIC_RE 25 - -#define CO_APIC_CPU 28 /* Timer and Cache interrupt */ -#define CO_APIC_NMI 29 -#define CO_APIC_LAST CO_APIC_NMI - -/* - * This is how irqs are assigned on the Visual Workstation. - * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU). - * All other devices (including PCI) go to Cobalt and are irq's 16 on up. - */ -#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */ -#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0) -#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */ -#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */ -#define CO_IRQ_IDE0 14 /* knowledge of... */ -#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */ -#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259) - -#ifdef CONFIG_X86_VISWS_APIC -static inline void co_cpu_write(unsigned long reg, unsigned long v) -{ - *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v; -} - -static inline unsigned long co_cpu_read(unsigned long reg) -{ - return *((volatile unsigned long *)(CO_CPU_VADDR+reg)); -} - -static inline void co_apic_write(unsigned long reg, unsigned long v) -{ - *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v; -} - -static inline unsigned long co_apic_read(unsigned long reg) -{ - return *((volatile unsigned long *)(CO_APIC_VADDR+reg)); -} -#endif - -extern char visws_board_type; - -#define VISWS_320 0 -#define VISWS_540 1 - -extern char visws_board_rev; - -extern int pci_visws_init(void); - -#endif /* _ASM_X86_VISWS_COBALT_H */ diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h deleted file mode 100644 index a10d89bc127..00000000000 --- a/arch/x86/include/asm/visws/lithium.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ASM_X86_VISWS_LITHIUM_H -#define _ASM_X86_VISWS_LITHIUM_H - -#include <asm/fixmap.h> - -/* - * Lithium is the SGI Visual Workstation I/O ASIC - */ - -#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */ -#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */ - -/* see set_fixmap() and asm/fixmap.h */ -#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA)) -#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB)) - -/* Not a standard PCI? (not in linux/pci.h) */ -#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */ -#define LI_PCI_INTEN 0x46 - -/* LI_PCI_INTENT bits */ -#define LI_INTA_0 0x0001 -#define LI_INTA_1 0x0002 -#define LI_INTA_2 0x0004 -#define LI_INTA_3 0x0008 -#define LI_INTA_4 0x0010 -#define LI_INTB 0x0020 -#define LI_INTC 0x0040 -#define LI_INTD 0x0080 - -/* More special purpose macros... */ -static inline void li_pcia_write16(unsigned long reg, unsigned short v) -{ - *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v; -} - -static inline unsigned short li_pcia_read16(unsigned long reg) -{ - return *((volatile unsigned short *)(LI_PCIA_VADDR+reg)); -} - -static inline void li_pcib_write16(unsigned long reg, unsigned short v) -{ - *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v; -} - -static inline unsigned short li_pcib_read16(unsigned long reg) -{ - return *((volatile unsigned short *)(LI_PCIB_VADDR+reg)); -} - -#endif /* _ASM_X86_VISWS_LITHIUM_H */ - diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h deleted file mode 100644 index d0af4d338e7..00000000000 --- a/arch/x86/include/asm/visws/piix4.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef _ASM_X86_VISWS_PIIX4_H -#define _ASM_X86_VISWS_PIIX4_H - -/* - * PIIX4 as used on SGI Visual Workstations - */ - -#define PIIX_PM_START 0x0F80 - -#define SIO_GPIO_START 0x0FC0 - -#define SIO_PM_START 0x0FC8 - -#define PMBASE PIIX_PM_START -#define GPIREG0 (PMBASE+0x30) -#define GPIREG(x) (GPIREG0+((x)/8)) -#define GPIBIT(x) (1 << ((x)%8)) - -#define PIIX_GPI_BD_ID1 18 -#define PIIX_GPI_BD_ID2 19 -#define PIIX_GPI_BD_ID3 20 -#define PIIX_GPI_BD_ID4 21 -#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) -#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ - GPIBIT(PIIX_GPI_BD_ID2) | \ - GPIBIT(PIIX_GPI_BD_ID3) | \ - GPIBIT(PIIX_GPI_BD_ID4) ) - -#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) - -#define SIO_INDEX 0x2e -#define SIO_DATA 0x2f - -#define SIO_DEV_SEL 0x7 -#define SIO_DEV_ENB 0x30 -#define SIO_DEV_MSB 0x60 -#define SIO_DEV_LSB 0x61 - -#define SIO_GP_DEV 0x7 - -#define SIO_GP_BASE SIO_GPIO_START -#define SIO_GP_MSB (SIO_GP_BASE>>8) -#define SIO_GP_LSB (SIO_GP_BASE&0xff) - -#define SIO_GP_DATA1 (SIO_GP_BASE+0) - -#define SIO_PM_DEV 0x8 - -#define SIO_PM_BASE SIO_PM_START -#define SIO_PM_MSB (SIO_PM_BASE>>8) -#define SIO_PM_LSB (SIO_PM_BASE&0xff) -#define SIO_PM_INDEX (SIO_PM_BASE+0) -#define SIO_PM_DATA (SIO_PM_BASE+1) - -#define SIO_PM_FER2 0x1 - -#define SIO_PM_GP_EN 0x80 - - - -/* - * This is the dev/reg where generating a config cycle will - * result in a PCI special cycle. - */ -#define SPECIAL_DEV 0xff -#define SPECIAL_REG 0x00 - -/* - * PIIX4 needs to see a special cycle with the following data - * to be convinced the processor has gone into the stop grant - * state. PIIX4 insists on seeing this before it will power - * down a system. - */ -#define PIIX_SPECIAL_STOP 0x00120002 - -#define PIIX4_RESET_PORT 0xcf9 -#define PIIX4_RESET_VAL 0x6 - -#define PMSTS_PORT 0xf80 // 2 bytes PM Status -#define PMEN_PORT 0xf82 // 2 bytes PM Enable -#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control - -#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state - -/* - * PMSTS and PMEN I/O bit definitions. - * (Bits are the same in both registers) - */ -#define PM_STS_RSM (1<<15) // Resume Status -#define PM_STS_PWRBTNOR (1<<11) // Power Button Override -#define PM_STS_RTC (1<<10) // RTC status -#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? -#define PM_STS_GBL (1<<5) // Global Status -#define PM_STS_BM (1<<4) // Bus Master Status -#define PM_STS_TMROF (1<<0) // Timer Overflow Status. - -/* - * Stop clock GPI register - */ -#define PIIX_GPIREG0 (0xf80 + 0x30) - -/* - * Stop clock GPI bit in GPIREG0 - */ -#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in - -#endif /* _ASM_X86_VISWS_PIIX4_H */ diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h deleted file mode 100644 index 5fbf63e1003..00000000000 --- a/arch/x86/include/asm/visws/sgivw.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * Frame buffer position and size: - */ -extern unsigned long sgivwfb_mem_phys; -extern unsigned long sgivwfb_mem_size; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8e61d23b8f6..86281ffb96d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -903,10 +903,6 @@ static int __init acpi_parse_madt_lapic_entries(void) #ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 -#ifdef CONFIG_X86_ES7000 -extern int es7000_plat; -#endif - void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { int ioapic; @@ -956,14 +952,6 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); pr_debug("Bus #%d is ISA\n", MP_ISA_BUS); -#ifdef CONFIG_X86_ES7000 - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 0ae0323b1f9..dcb5b15401c 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -18,10 +18,7 @@ obj-y += apic_flat_64.o endif # APIC probe will depend on the listing order here -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o -obj-$(CONFIG_X86_SUMMIT) += summit_32.o obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o -obj-$(CONFIG_X86_ES7000) += es7000_32.o # For 32bit, probe_32 need to be listed last obj-$(CONFIG_X86_LOCAL_APIC) += probe_$(BITS).o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 53e20531470..481ae38f6a4 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2136,7 +2136,6 @@ int generic_processor_info(int apicid, int version) * * - arch/x86/kernel/mpparse.c: MP_processor_info() * - arch/x86/mm/amdtopology.c: amd_numa_init() - * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info() * * This function is executed with the modified * boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c deleted file mode 100644 index 6f8f8b348a3..00000000000 --- a/arch/x86/kernel/apic/es7000_32.c +++ /dev/null @@ -1,738 +0,0 @@ -/* - * Written by: Garry Forsgren, Unisys Corporation - * Natalie Protasevich, Unisys Corporation - * - * This file contains the code to configure and interface - * with Unisys ES7000 series hardware system manager. - * - * Copyright (c) 2003 Unisys Corporation. - * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar - * - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Contact information: Unisys Corporation, Township Line & Union Meeting - * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: - * - * http://www.unisys.com - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/notifier.h> -#include <linux/spinlock.h> -#include <linux/cpumask.h> -#include <linux/threads.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/acpi.h> -#include <linux/init.h> -#include <linux/gfp.h> -#include <linux/nmi.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include <asm/apicdef.h> -#include <linux/atomic.h> -#include <asm/fixmap.h> -#include <asm/mpspec.h> -#include <asm/setup.h> -#include <asm/apic.h> -#include <asm/ipi.h> - -/* - * ES7000 chipsets - */ - -#define NON_UNISYS 0 -#define ES7000_CLASSIC 1 -#define ES7000_ZORRO 2 - -#define MIP_REG 1 -#define MIP_PSAI_REG 4 - -#define MIP_BUSY 1 -#define MIP_SPIN 0xf0000 -#define MIP_VALID 0x0100000000000000ULL -#define MIP_SW_APIC 0x1020b - -#define MIP_PORT(val) ((val >> 32) & 0xffff) - -#define MIP_RD_LO(val) (val & 0xffffffff) - -struct mip_reg { - unsigned long long off_0x00; - unsigned long long off_0x08; - unsigned long long off_0x10; - unsigned long long off_0x18; - unsigned long long off_0x20; - unsigned long long off_0x28; - unsigned long long off_0x30; - unsigned long long off_0x38; -}; - -struct mip_reg_info { - unsigned long long mip_info; - unsigned long long delivery_info; - unsigned long long host_reg; - unsigned long long mip_reg; -}; - -struct psai { - unsigned long long entry_type; - unsigned long long addr; - unsigned long long bep_addr; -}; - -#ifdef CONFIG_ACPI - -struct es7000_oem_table { - struct acpi_table_header Header; - u32 OEMTableAddr; - u32 OEMTableSize; -}; - -static unsigned long oem_addrX; -static unsigned long oem_size; - -#endif - -/* - * ES7000 Globals - */ - -static volatile unsigned long *psai; -static struct mip_reg *mip_reg; -static struct mip_reg *host_reg; -static int mip_port; -static unsigned long mip_addr; -static unsigned long host_addr; - -int es7000_plat; - -/* - * GSI override for ES7000 platforms. - */ - - -static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) -{ - unsigned long vect = 0, psaival = 0; - - if (psai == NULL) - return -1; - - vect = ((unsigned long)__pa(eip)/0x1000) << 16; - psaival = (0x1000000 | vect | cpu); - - while (*psai & 0x1000000) - ; - - *psai = psaival; - - return 0; -} - -static int es7000_apic_is_cluster(void) -{ - /* MPENTIUMIII */ - if (boot_cpu_data.x86 == 6 && - (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11)) - return 1; - - return 0; -} - -static void setup_unisys(void) -{ - /* - * Determine the generation of the ES7000 currently running. - * - * es7000_plat = 1 if the machine is a 5xx ES7000 box - * es7000_plat = 2 if the machine is a x86_64 ES7000 box - * - */ - if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) - es7000_plat = ES7000_ZORRO; - else - es7000_plat = ES7000_CLASSIC; -} - -/* - * Parse the OEM Table: - */ -static int parse_unisys_oem(char *oemptr) -{ - int i; - int success = 0; - unsigned char type, size; - unsigned long val; - char *tp = NULL; - struct psai *psaip = NULL; - struct mip_reg_info *mi; - struct mip_reg *host, *mip; - - tp = oemptr; - - tp += 8; - - for (i = 0; i <= 6; i++) { - type = *tp++; - size = *tp++; - tp -= 2; - switch (type) { - case MIP_REG: - mi = (struct mip_reg_info *)tp; - val = MIP_RD_LO(mi->host_reg); - host_addr = val; - host = (struct mip_reg *)val; - host_reg = __va(host); - val = MIP_RD_LO(mi->mip_reg); - mip_port = MIP_PORT(mi->mip_info); - mip_addr = val; - mip = (struct mip_reg *)val; - mip_reg = __va(mip); - pr_debug("host_reg = 0x%lx\n", - (unsigned long)host_reg); - pr_debug("mip_reg = 0x%lx\n", - (unsigned long)mip_reg); - success++; - break; - case MIP_PSAI_REG: - psaip = (struct psai *)tp; - if (tp != NULL) { - if (psaip->addr) - psai = __va(psaip->addr); - else - psai = NULL; - success++; - } - break; - default: - break; - } - tp += size; - } - - if (success < 2) - es7000_plat = NON_UNISYS; - else - setup_unisys(); - - return es7000_plat; -} - -#ifdef CONFIG_ACPI -static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) -{ - struct acpi_table_header *header = NULL; - struct es7000_oem_table *table; - acpi_size tbl_size; - acpi_status ret; - int i = 0; - - for (;;) { - ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size); - if (!ACPI_SUCCESS(ret)) - return -1; - - if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) - break; - - early_acpi_os_unmap_memory(header, tbl_size); - } - - table = (void *)header; - - oem_addrX = table->OEMTableAddr; - oem_size = table->OEMTableSize; - - early_acpi_os_unmap_memory(header, tbl_size); - - *oem_addr = (unsigned long)__acpi_map_table(oem_addrX, oem_size); - - return 0; -} - -static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) -{ - if (!oem_addr) - return; - - __acpi_unmap_table((char *)oem_addr, oem_size); -} - -static int es7000_check_dsdt(void) -{ - struct acpi_table_header header; - - if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) && - !strncmp(header.oem_id, "UNISYS", 6)) - return 1; - return 0; -} - -static int es7000_acpi_ret; - -/* Hook from generic ACPI tables.c */ -static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - unsigned long oem_addr = 0; - int check_dsdt; - int ret = 0; - - /* check dsdt at first to avoid clear fix_map for oem_addr */ - check_dsdt = es7000_check_dsdt(); - - if (!find_unisys_acpi_oem_table(&oem_addr)) { - if (check_dsdt) { - ret = parse_unisys_oem((char *)oem_addr); - } else { - setup_unisys(); - ret = 1; - } - /* - * we need to unmap it - */ - unmap_unisys_acpi_oem_table(oem_addr); - } - - es7000_acpi_ret = ret; - - return ret && !es7000_apic_is_cluster(); -} - -static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id) -{ - int ret = es7000_acpi_ret; - - return ret && es7000_apic_is_cluster(); -} - -#else /* !CONFIG_ACPI: */ -static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - return 0; -} - -static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id) -{ - return 0; -} -#endif /* !CONFIG_ACPI */ - -static void es7000_spin(int n) -{ - int i = 0; - - while (i++ < n) - rep_nop(); -} - -static int es7000_mip_write(struct mip_reg *mip_reg) -{ - int status = 0; - int spin; - - spin = MIP_SPIN; - while ((host_reg->off_0x38 & MIP_VALID) != 0) { - if (--spin <= 0) { - WARN(1, "Timeout waiting for Host Valid Flag\n"); - return -1; - } - es7000_spin(MIP_SPIN); - } - - memcpy(host_reg, mip_reg, sizeof(struct mip_reg)); - outb(1, mip_port); - - spin = MIP_SPIN; - - while ((mip_reg->off_0x38 & MIP_VALID) == 0) { - if (--spin <= 0) { - WARN(1, "Timeout waiting for MIP Valid Flag\n"); - return -1; - } - es7000_spin(MIP_SPIN); - } - - status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48; - mip_reg->off_0x38 &= ~MIP_VALID; - - return status; -} - -static void es7000_enable_apic_mode(void) -{ - struct mip_reg es7000_mip_reg; - int mip_status; - - if (!es7000_plat) - return; - - pr_info("Enabling APIC mode.\n"); - memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); - es7000_mip_reg.off_0x00 = MIP_SW_APIC; - es7000_mip_reg.off_0x38 = MIP_VALID; - - while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) - WARN(1, "Command failed, status = %x\n", mip_status); -} - -static unsigned int es7000_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0xFF; -} - -static void es7000_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_phys(mask, vector); -} - -static void es7000_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector); -} - -static void es7000_send_IPI_all(int vector) -{ - es7000_send_IPI_mask(cpu_online_mask, vector); -} - -static int es7000_apic_id_registered(void) -{ - return 1; -} - -static const struct cpumask *target_cpus_cluster(void) -{ - return cpu_all_mask; -} - -static const struct cpumask *es7000_target_cpus(void) -{ - return cpumask_of(smp_processor_id()); -} - -static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid) -{ - return 0; -} - -static unsigned long es7000_check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} - -static int es7000_early_logical_apicid(int cpu) -{ - /* on es7000, logical apicid is the same as physical */ - return early_per_cpu(x86_bios_cpu_apicid, cpu); -} - -static unsigned long calculate_ldr(int cpu) -{ - unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu); - - return SET_APIC_LOGICAL_ID(id); -} - -/* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LdR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ -static void es7000_init_apic_ldr_cluster(void) -{ - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_CLUSTER); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); -} - -static void es7000_init_apic_ldr(void) -{ - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_FLAT); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); -} - -static void es7000_setup_apic_routing(void) -{ - int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); - - pr_info("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", - (apic_version[apic] == 0x14) ? - "Physical Cluster" : "Logical Cluster", - nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); -} - -static int es7000_cpu_present_to_apicid(int mps_cpu) -{ - if (!mps_cpu) - return boot_cpu_physical_apicid; - else if (mps_cpu < nr_cpu_ids) - return per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static int cpu_id; - -static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap) -{ - physid_set_mask_of_physid(cpu_id, retmap); - ++cpu_id; -} - -static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) -{ - /* For clustered we don't have a good way to do this yet - hack */ - physids_promote(0xFFL, retmap); -} - -static int es7000_check_phys_apicid_present(int cpu_physical_apicid) -{ - boot_cpu_physical_apicid = read_apic_id(); - return 1; -} - -static inline int -es7000_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id) -{ - unsigned int round = 0; - unsigned int cpu, uninitialized_var(apicid); - - /* - * The cpus in the mask must all be on the apic cluster. - */ - for_each_cpu_and(cpu, cpumask, cpu_online_mask) { - int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { - WARN(1, "Not a valid mask!"); - - return -EINVAL; - } - apicid |= new_apicid; - round++; - } - if (!round) - return -EINVAL; - *dest_id = apicid; - return 0; -} - -static int -es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - cpumask_var_t cpumask; - *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); - - if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) - return 0; - - cpumask_and(cpumask, inmask, andmask); - es7000_cpu_mask_to_apicid(cpumask, apicid); - - free_cpumask_var(cpumask); - - return 0; -} - -static int es7000_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -static int probe_es7000(void) -{ - /* probed later in mptable/ACPI hooks */ - return 0; -} - -static int es7000_mps_ret; -static int es7000_mps_oem_check(struct mpc_table *mpc, char *oem, - char *productid) -{ - int ret = 0; - - if (mpc->oemptr) { - struct mpc_oemtable *oem_table = - (struct mpc_oemtable *)mpc->oemptr; - - if (!strncmp(oem, "UNISYS", 6)) - ret = parse_unisys_oem((char *)oem_table); - } - - es7000_mps_ret = ret; - - return ret && !es7000_apic_is_cluster(); -} - -static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem, - char *productid) -{ - int ret = es7000_mps_ret; - - return ret && es7000_apic_is_cluster(); -} - -/* We've been warned by a false positive warning.Use __refdata to keep calm. */ -static struct apic __refdata apic_es7000_cluster = { - - .name = "es7000", - .probe = probe_es7000, - .acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = es7000_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* logical delivery broadcast to all procs: */ - .irq_dest_mode = 1, - - .target_cpus = target_cpus_cluster, - .disable_esr = 1, - .dest_logical = 0, - .check_apicid_used = es7000_check_apicid_used, - .check_apicid_present = es7000_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = es7000_init_apic_ldr_cluster, - - .ioapic_phys_id_map = es7000_ioapic_phys_id_map, - .setup_apic_routing = es7000_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = es7000_cpu_present_to_apicid, - .apicid_to_cpu_present = es7000_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = es7000_check_phys_apicid_present, - .enable_apic_mode = es7000_enable_apic_mode, - .phys_pkg_id = es7000_phys_pkg_id, - .mps_oem_check = es7000_mps_oem_check_cluster, - - .get_apic_id = es7000_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and, - - .send_IPI_mask = es7000_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = es7000_send_IPI_allbutself, - .send_IPI_all = es7000_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .wakeup_secondary_cpu = wakeup_secondary_cpu_via_mip, - - .trampoline_phys_low = 0x467, - .trampoline_phys_high = 0x469, - - .wait_for_init_deassert = false, - /* Nothing to do for most platforms, since cleared by the INIT cycle: */ - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = es7000_early_logical_apicid, -}; - -static struct apic __refdata apic_es7000 = { - - .name = "es7000", - .probe = probe_es7000, - .acpi_madt_oem_check = es7000_acpi_madt_oem_check, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = es7000_apic_id_registered, - - .irq_delivery_mode = dest_Fixed, - /* phys delivery to target CPUs: */ - .irq_dest_mode = 0, - - .target_cpus = es7000_target_cpus, - .disable_esr = 1, - .dest_logical = 0, - .check_apicid_used = es7000_check_apicid_used, - .check_apicid_present = es7000_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = es7000_init_apic_ldr, - - .ioapic_phys_id_map = es7000_ioapic_phys_id_map, - .setup_apic_routing = es7000_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = es7000_cpu_present_to_apicid, - .apicid_to_cpu_present = es7000_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = es7000_check_phys_apicid_present, - .enable_apic_mode = es7000_enable_apic_mode, - .phys_pkg_id = es7000_phys_pkg_id, - .mps_oem_check = es7000_mps_oem_check, - - .get_apic_id = es7000_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and, - - .send_IPI_mask = es7000_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = es7000_send_IPI_allbutself, - .send_IPI_all = es7000_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .trampoline_phys_low = 0x467, - .trampoline_phys_high = 0x469, - - .wait_for_init_deassert = true, - /* Nothing to do for most platforms, since cleared by the INIT cycle: */ - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = es7000_early_logical_apicid, -}; - -/* - * Need to check for es7000 followed by es7000_cluster, so this order - * in apic_drivers is important. - */ -apic_drivers(apic_es7000, apic_es7000_cluster); diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c deleted file mode 100644 index 030ea1c04f7..00000000000 --- a/arch/x86/kernel/apic/numaq_32.c +++ /dev/null @@ -1,524 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <gone@us.ibm.com> - */ -#include <linux/nodemask.h> -#include <linux/topology.h> -#include <linux/bootmem.h> -#include <linux/memblock.h> -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <linux/kernel.h> -#include <linux/mmzone.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/numa.h> -#include <linux/smp.h> -#include <linux/io.h> -#include <linux/mm.h> - -#include <asm/processor.h> -#include <asm/fixmap.h> -#include <asm/mpspec.h> -#include <asm/numaq.h> -#include <asm/setup.h> -#include <asm/apic.h> -#include <asm/e820.h> -#include <asm/ipi.h> - -int found_numaq; - -/* - * Have to match translation table entries to main table entries by counter - * hence the mpc_record variable .... can't see a less disgusting way of - * doing this .... - */ -struct mpc_trans { - unsigned char mpc_type; - unsigned char trans_len; - unsigned char trans_type; - unsigned char trans_quad; - unsigned char trans_global; - unsigned char trans_local; - unsigned short trans_reserved; -}; - -static int mpc_record; - -static struct mpc_trans *translation_table[MAX_MPC_ENTRY]; - -int mp_bus_id_to_node[MAX_MP_BUSSES]; -int mp_bus_id_to_local[MAX_MP_BUSSES]; -int quad_local_to_mp_bus_id[NR_CPUS/4][4]; - - -static inline void numaq_register_node(int node, struct sys_cfg_data *scd) -{ - struct eachquadmem *eq = scd->eq + node; - u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20; - u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20; - int ret; - - node_set(node, numa_nodes_parsed); - ret = numa_add_memblk(node, start, end); - BUG_ON(ret < 0); -} - -/* - * Function: smp_dump_qct() - * - * Description: gets memory layout from the quad config table. This - * function also updates numa_nodes_parsed with the nodes (quads) present. - */ -static void __init smp_dump_qct(void) -{ - struct sys_cfg_data *scd; - int node; - - scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR); - - for_each_node(node) { - if (scd->quads_present31_0 & (1 << node)) - numaq_register_node(node, scd); - } -} - -void numaq_tsc_disable(void) -{ - if (!found_numaq) - return; - - if (num_online_nodes() > 1) { - printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); - setup_clear_cpu_cap(X86_FEATURE_TSC); - } -} - -static void __init numaq_tsc_init(void) -{ - numaq_tsc_disable(); -} - -static inline int generate_logical_apicid(int quad, int phys_apicid) -{ - return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1); -} - -/* x86_quirks member */ -static int mpc_apic_id(struct mpc_cpu *m) -{ - int quad = translation_table[mpc_record]->trans_quad; - int logical_apicid = generate_logical_apicid(quad, m->apicid); - - printk(KERN_DEBUG - "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n", - m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8, - (m->cpufeature & CPU_MODEL_MASK) >> 4, - m->apicver, quad, logical_apicid); - - return logical_apicid; -} - -/* x86_quirks member */ -static void mpc_oem_bus_info(struct mpc_bus *m, char *name) -{ - int quad = translation_table[mpc_record]->trans_quad; - int local = translation_table[mpc_record]->trans_local; - - mp_bus_id_to_node[m->busid] = quad; - mp_bus_id_to_local[m->busid] = local; - - printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad); -} - -/* x86_quirks member */ -static void mpc_oem_pci_bus(struct mpc_bus *m) -{ - int quad = translation_table[mpc_record]->trans_quad; - int local = translation_table[mpc_record]->trans_local; - - quad_local_to_mp_bus_id[quad][local] = m->busid; -} - -/* - * Called from mpparse code. - * mode = 0: prescan - * mode = 1: one mpc entry scanned - */ -static void numaq_mpc_record(unsigned int mode) -{ - if (!mode) - mpc_record = 0; - else - mpc_record++; -} - -static void __init MP_translation_info(struct mpc_trans *m) -{ - printk(KERN_INFO - "Translation: record %d, type %d, quad %d, global %d, local %d\n", - mpc_record, m->trans_type, m->trans_quad, m->trans_global, - m->trans_local); - - if (mpc_record >= MAX_MPC_ENTRY) - printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); - else - translation_table[mpc_record] = m; /* stash this for later */ - - if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) - node_set_online(m->trans_quad); -} - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -/* - * Read/parse the MPC oem tables - */ -static void __init smp_read_mpc_oem(struct mpc_table *mpc) -{ - struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr; - int count = sizeof(*oemtable); /* the header size */ - unsigned char *oemptr = ((unsigned char *)oemtable) + count; - - mpc_record = 0; - printk(KERN_INFO - "Found an OEM MPC table at %8p - parsing it...\n", oemtable); - - if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) { - printk(KERN_WARNING - "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", - oemtable->signature[0], oemtable->signature[1], - oemtable->signature[2], oemtable->signature[3]); - return; - } - - if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) { - printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); - return; - } - - while (count < oemtable->length) { - switch (*oemptr) { - case MP_TRANSLATION: - { - struct mpc_trans *m = (void *)oemptr; - - MP_translation_info(m); - oemptr += sizeof(*m); - count += sizeof(*m); - ++mpc_record; - break; - } - default: - printk(KERN_WARNING - "Unrecognised OEM table entry type! - %d\n", - (int)*oemptr); - return; - } - } -} - -static __init void early_check_numaq(void) -{ - /* - * get boot-time SMP configuration: - */ - if (smp_found_config) - early_get_smp_config(); - - if (found_numaq) { - x86_init.mpparse.mpc_record = numaq_mpc_record; - x86_init.mpparse.setup_ioapic_ids = x86_init_noop; - x86_init.mpparse.mpc_apic_id = mpc_apic_id; - x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem; - x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus; - x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info; - x86_init.timers.tsc_pre_init = numaq_tsc_init; - x86_init.pci.init = pci_numaq_init; - } -} - -int __init numaq_numa_init(void) -{ - early_check_numaq(); - if (!found_numaq) - return -ENOENT; - smp_dump_qct(); - - return 0; -} - -#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static inline unsigned int numaq_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0x0F; -} - -static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_logical(mask, vector); -} - -static inline void numaq_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); -} - -static inline void numaq_send_IPI_all(int vector) -{ - numaq_send_IPI_mask(cpu_online_mask, vector); -} - -#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8) -#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa) - -/* - * Because we use NMIs rather than the INIT-STARTUP sequence to - * bootstrap the CPUs, the APIC may be in a weird state. Kick it: - */ -static inline void numaq_smp_callin_clear_local_apic(void) -{ - clear_local_APIC(); -} - -static inline const struct cpumask *numaq_target_cpus(void) -{ - return cpu_all_mask; -} - -static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid) -{ - return physid_isset(apicid, *map); -} - -static inline unsigned long numaq_check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} - -static inline int numaq_apic_id_registered(void) -{ - return 1; -} - -static inline void numaq_init_apic_ldr(void) -{ - /* Already done in NUMA-Q firmware */ -} - -static inline void numaq_setup_apic_routing(void) -{ - printk(KERN_INFO - "Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n", - nr_ioapics); -} - -/* - * Skip adding the timer int on secondary nodes, which causes - * a small but painful rift in the time-space continuum. - */ -static inline int numaq_multi_timer_check(int apic, int irq) -{ - return apic != 0 && irq == 0; -} - -static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) -{ - /* We don't have a good way to do this yet - hack */ - return physids_promote(0xFUL, retmap); -} - -/* - * Supporting over 60 cpus on NUMA-Q requires a locality-dependent - * cpu to APIC ID relation to properly interact with the intelligent - * mode of the cluster controller. - */ -static inline int numaq_cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < 60) - return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); - else - return BAD_APICID; -} - -static inline int numaq_apicid_to_node(int logical_apicid) -{ - return logical_apicid >> 4; -} - -static int numaq_numa_cpu_node(int cpu) -{ - int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (logical_apicid != BAD_APICID) - return numaq_apicid_to_node(logical_apicid); - return NUMA_NO_NODE; -} - -static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap) -{ - int node = numaq_apicid_to_node(logical_apicid); - int cpu = __ffs(logical_apicid & 0xf); - - physid_set_mask_of_physid(cpu + 4*node, retmap); -} - -/* Where the IO area was mapped on multiquad, always 0 otherwise */ -void *xquad_portio; - -static inline int numaq_check_phys_apicid_present(int phys_apicid) -{ - return 1; -} - -/* - * We use physical apicids here, not logical, so just return the default - * physical broadcast to stop people from breaking us - */ -static int -numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - *apicid = 0x0F; - return 0; -} - -/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ -static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -static int -numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid) -{ - if (strncmp(oem, "IBM NUMA", 8)) - printk(KERN_ERR "Warning! Not a NUMA-Q system!\n"); - else - found_numaq = 1; - - return found_numaq; -} - -static int probe_numaq(void) -{ - /* already know from get_memcfg_numaq() */ - return found_numaq; -} - -static void numaq_setup_portio_remap(void) -{ - int num_quads = num_online_nodes(); - - if (num_quads <= 1) - return; - - printk(KERN_INFO - "Remapping cross-quad port I/O for %d quads\n", num_quads); - - xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); - - printk(KERN_INFO - "xquad_portio vaddr 0x%08lx, len %08lx\n", - (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); -} - -/* Use __refdata to keep false positive warning calm. */ -static struct apic __refdata apic_numaq = { - - .name = "NUMAQ", - .probe = probe_numaq, - .acpi_madt_oem_check = NULL, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = numaq_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* physical delivery on LOCAL quad: */ - .irq_dest_mode = 0, - - .target_cpus = numaq_target_cpus, - .disable_esr = 1, - .dest_logical = APIC_DEST_LOGICAL, - .check_apicid_used = numaq_check_apicid_used, - .check_apicid_present = numaq_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = numaq_init_apic_ldr, - - .ioapic_phys_id_map = numaq_ioapic_phys_id_map, - .setup_apic_routing = numaq_setup_apic_routing, - .multi_timer_check = numaq_multi_timer_check, - .cpu_present_to_apicid = numaq_cpu_present_to_apicid, - .apicid_to_cpu_present = numaq_apicid_to_cpu_present, - .setup_portio_remap = numaq_setup_portio_remap, - .check_phys_apicid_present = numaq_check_phys_apicid_present, - .enable_apic_mode = NULL, - .phys_pkg_id = numaq_phys_pkg_id, - .mps_oem_check = numaq_mps_oem_check, - - .get_apic_id = numaq_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0x0F << 24, - - .cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and, - - .send_IPI_mask = numaq_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = numaq_send_IPI_allbutself, - .send_IPI_all = numaq_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi, - .trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW, - .trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH, - - /* We don't do anything here because we use NMI's to boot instead */ - .wait_for_init_deassert = false, - .smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic, - .inquire_remote_apic = NULL, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = numaq_numa_cpu_node, -}; - -apic_driver(apic_numaq); diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c deleted file mode 100644 index b656128611c..00000000000 --- a/arch/x86/kernel/apic/summit_32.c +++ /dev/null @@ -1,550 +0,0 @@ -/* - * IBM Summit-Specific Code - * - * Written By: Matthew Dobson, IBM Corporation - * - * Copyright (c) 2003 IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <colpatch@us.ibm.com> - * - */ - -#define pr_fmt(fmt) "summit: %s: " fmt, __func__ - -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/bios_ebda.h> - -/* - * APIC driver for the IBM "Summit" chipset. - */ -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <asm/mpspec.h> -#include <asm/apic.h> -#include <asm/smp.h> -#include <asm/fixmap.h> -#include <asm/apicdef.h> -#include <asm/ipi.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/gfp.h> -#include <linux/smp.h> - -static unsigned summit_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0xFF; -} - -static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_logical(mask, vector); -} - -static void summit_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); -} - -static void summit_send_IPI_all(int vector) -{ - summit_send_IPI_mask(cpu_online_mask, vector); -} - -#include <asm/tsc.h> - -extern int use_cyclone; - -#ifdef CONFIG_X86_SUMMIT_NUMA -static void setup_summit(void); -#else -static inline void setup_summit(void) {} -#endif - -static int summit_mps_oem_check(struct mpc_table *mpc, char *oem, - char *productid) -{ - if (!strncmp(oem, "IBM ENSW", 8) && - (!strncmp(productid, "VIGIL SMP", 9) - || !strncmp(productid, "EXA", 3) - || !strncmp(productid, "RUTHLESS SMP", 12))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -/* Hook from generic ACPI tables.c */ -static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERVIGIL", 8) - || !strncmp(oem_table_id, "EXA", 3))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -struct rio_table_hdr { - unsigned char version; /* Version number of this data structure */ - /* Version 3 adds chassis_num & WP_index */ - unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ - unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ -} __attribute__((packed)); - -struct scal_detail { - unsigned char node_id; /* Scalability Node ID */ - unsigned long CBAR; /* Address of 1MB register space */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF = None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port2node; /* Node ID port connected to: 0xFF = None */ - unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ -} __attribute__((packed)); - -struct rio_detail { - unsigned char node_id; /* RIO Node ID */ - unsigned long BBAR; /* Address of 1MB register space */ - unsigned char type; /* Type of device */ - unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ - /* For CYC: Node ID of Twister that owns this CYC */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF=None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ - /* For CYC: 0 */ - unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ - /* = 0 : the XAPIC is not used, ie:*/ - /* ints fwded to another XAPIC */ - /* Bits1:7 Reserved */ - /* For CYC: Bits0:7 Reserved */ - unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ - /* lower slot numbers/PCI bus numbers */ - /* For CYC: No meaning */ - unsigned char chassis_num; /* 1 based Chassis number */ - /* For LookOut WPEGs this field indicates the */ - /* Expansion Chassis #, enumerated from Boot */ - /* Node WPEG external port, then Boot Node CYC */ - /* external port, then Next Vigil chassis WPEG */ - /* external port, etc. */ - /* Shared Lookouts have only 1 chassis number (the */ - /* first one assigned) */ -} __attribute__((packed)); - - -typedef enum { - CompatTwister = 0, /* Compatibility Twister */ - AltTwister = 1, /* Alternate Twister of internal 8-way */ - CompatCyclone = 2, /* Compatibility Cyclone */ - AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ - CompatWPEG = 4, /* Compatibility WPEG */ - AltWPEG = 5, /* Second Planar WPEG */ - LookOutAWPEG = 6, /* LookOut WPEG */ - LookOutBWPEG = 7, /* LookOut WPEG */ -} node_type; - -static inline int is_WPEG(struct rio_detail *rio){ - return (rio->type == CompatWPEG || rio->type == AltWPEG || - rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); -} - -#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static const struct cpumask *summit_target_cpus(void) -{ - /* CPU_MASK_ALL (0xff) has undefined behaviour with - * dest_LowestPrio mode logical clustered apic interrupt routing - * Just start on cpu 0. IRQ balancing will spread load - */ - return cpumask_of(0); -} - -static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid) -{ - return 0; -} - -/* we don't use the phys_cpu_present_map to indicate apicid presence */ -static unsigned long summit_check_apicid_present(int bit) -{ - return 1; -} - -static int summit_early_logical_apicid(int cpu) -{ - int count = 0; - u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu); - u8 my_cluster = APIC_CLUSTER(my_id); -#ifdef CONFIG_SMP - u8 lid; - int i; - - /* Create logical APIC IDs by counting CPUs already in cluster. */ - for (count = 0, i = nr_cpu_ids; --i >= 0; ) { - lid = early_per_cpu(x86_cpu_to_logical_apicid, i); - if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) - ++count; - } -#endif - /* We only have a 4 wide bitmap in cluster mode. If a deranged - * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ - BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); - return my_cluster | (1UL << count); -} - -static void summit_init_apic_ldr(void) -{ - int cpu = smp_processor_id(); - unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - unsigned long val; - - apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(id); - apic_write(APIC_LDR, val); -} - -static int summit_apic_id_registered(void) -{ - return 1; -} - -static void summit_setup_apic_routing(void) -{ - pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n", - nr_ioapics); -} - -static int summit_cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < nr_cpu_ids) - return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap) -{ - /* For clustered we don't have a good way to do this yet - hack */ - physids_promote(0x0FL, retmap); -} - -static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap) -{ - physid_set_mask_of_physid(0, retmap); -} - -static int summit_check_phys_apicid_present(int physical_apicid) -{ - return 1; -} - -static inline int -summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id) -{ - unsigned int round = 0; - unsigned int cpu, apicid = 0; - - /* - * The cpus in the mask must all be on the apic cluster. - */ - for_each_cpu_and(cpu, cpumask, cpu_online_mask) { - int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { - pr_err("Not a valid mask!\n"); - return -EINVAL; - } - apicid |= new_apicid; - round++; - } - if (!round) - return -EINVAL; - *dest_id = apicid; - return 0; -} - -static int -summit_cpu_mask_to_apicid_and(const struct cpumask *inmask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - cpumask_var_t cpumask; - *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); - - if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) - return 0; - - cpumask_and(cpumask, inmask, andmask); - summit_cpu_mask_to_apicid(cpumask, apicid); - - free_cpumask_var(cpumask); - - return 0; -} - -/* - * cpuid returns the value latched in the HW at reset, not the APIC ID - * register's value. For any box whose BIOS changes APIC IDs, like - * clustered APIC systems, we must use hard_smp_processor_id. - * - * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. - */ -static int summit_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return hard_smp_processor_id() >> index_msb; -} - -static int probe_summit(void) -{ - /* probed later in mptable/ACPI hooks */ - return 0; -} - -#ifdef CONFIG_X86_SUMMIT_NUMA -static struct rio_table_hdr *rio_table_hdr; -static struct scal_detail *scal_devs[MAX_NUMNODES]; -static struct rio_detail *rio_devs[MAX_NUMNODES*4]; - -#ifndef CONFIG_X86_NUMAQ -static int mp_bus_id_to_node[MAX_MP_BUSSES]; -#endif - -static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) -{ - int twister = 0, node = 0; - int i, bus, num_buses; - - for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { - if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) { - twister = rio_devs[i]->owner_id; - break; - } - } - if (i == rio_table_hdr->num_rio_dev) { - pr_err("Couldn't find owner Cyclone for Winnipeg!\n"); - return last_bus; - } - - for (i = 0; i < rio_table_hdr->num_scal_dev; i++) { - if (scal_devs[i]->node_id == twister) { - node = scal_devs[i]->node_id; - break; - } - } - if (i == rio_table_hdr->num_scal_dev) { - pr_err("Couldn't find owner Twister for Cyclone!\n"); - return last_bus; - } - - switch (rio_devs[wpeg_num]->type) { - case CompatWPEG: - /* - * The Compatibility Winnipeg controls the 2 legacy buses, - * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case - * a PCI-PCI bridge card is used in either slot: total 5 buses. - */ - num_buses = 5; - break; - case AltWPEG: - /* - * The Alternate Winnipeg controls the 2 133MHz buses [1 slot - * each], their 2 "extra" buses, the 100MHz bus [2 slots] and - * the "extra" buses for each of those slots: total 7 buses. - */ - num_buses = 7; - break; - case LookOutAWPEG: - case LookOutBWPEG: - /* - * A Lookout Winnipeg controls 3 100MHz buses [2 slots each] - * & the "extra" buses for each of those slots: total 9 buses. - */ - num_buses = 9; - break; - default: - pr_info("Unsupported Winnipeg type!\n"); - return last_bus; - } - - for (bus = last_bus; bus < last_bus + num_buses; bus++) - mp_bus_id_to_node[bus] = node; - return bus; -} - -static int build_detail_arrays(void) -{ - unsigned long ptr; - int i, scal_detail_size, rio_detail_size; - - if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) { - pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n", - MAX_NUMNODES, rio_table_hdr->num_scal_dev); - return 0; - } - - switch (rio_table_hdr->version) { - default: - pr_warn("Invalid Rio Grande Table Version: %d\n", - rio_table_hdr->version); - return 0; - case 2: - scal_detail_size = 11; - rio_detail_size = 13; - break; - case 3: - scal_detail_size = 12; - rio_detail_size = 15; - break; - } - - ptr = (unsigned long)rio_table_hdr + 3; - for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size) - scal_devs[i] = (struct scal_detail *)ptr; - - for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size) - rio_devs[i] = (struct rio_detail *)ptr; - - return 1; -} - -void setup_summit(void) -{ - unsigned long ptr; - unsigned short offset; - int i, next_wpeg, next_bus = 0; - - /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */ - ptr = get_bios_ebda(); - ptr = (unsigned long)phys_to_virt(ptr); - - rio_table_hdr = NULL; - offset = 0x180; - while (offset) { - /* The block id is stored in the 2nd word */ - if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) { - /* set the pointer past the offset & block id */ - rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); - break; - } - /* The next offset is stored in the 1st word. 0 means no more */ - offset = *((unsigned short *)(ptr + offset)); - } - if (!rio_table_hdr) { - pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n"); - return; - } - - if (!build_detail_arrays()) - return; - - /* The first Winnipeg we're looking for has an index of 0 */ - next_wpeg = 0; - do { - for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { - if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) { - /* It's the Winnipeg we're looking for! */ - next_bus = setup_pci_node_map_for_wpeg(i, next_bus); - next_wpeg++; - break; - } - } - /* - * If we go through all Rio devices and don't find one with - * the next index, it means we've found all the Winnipegs, - * and thus all the PCI buses. - */ - if (i == rio_table_hdr->num_rio_dev) - next_wpeg = 0; - } while (next_wpeg != 0); -} -#endif - -static struct apic apic_summit = { - - .name = "summit", - .probe = probe_summit, - .acpi_madt_oem_check = summit_acpi_madt_oem_check, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = summit_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* logical delivery broadcast to all CPUs: */ - .irq_dest_mode = 1, - - .target_cpus = summit_target_cpus, - .disable_esr = 1, - .dest_logical = APIC_DEST_LOGICAL, - .check_apicid_used = summit_check_apicid_used, - .check_apicid_present = summit_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = summit_init_apic_ldr, - - .ioapic_phys_id_map = summit_ioapic_phys_id_map, - .setup_apic_routing = summit_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = summit_cpu_present_to_apicid, - .apicid_to_cpu_present = summit_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = summit_check_phys_apicid_present, - .enable_apic_mode = NULL, - .phys_pkg_id = summit_phys_pkg_id, - .mps_oem_check = summit_mps_oem_check, - - .get_apic_id = summit_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and, - - .send_IPI_mask = summit_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = summit_send_IPI_allbutself, - .send_IPI_all = summit_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, - .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, - - .wait_for_init_deassert = true, - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = summit_early_logical_apicid, -}; - -apic_driver(apic_summit); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 897d6201ef1..a80029035bf 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -274,10 +274,6 @@ static void intel_workarounds(struct cpuinfo_x86 *c) } #endif -#ifdef CONFIG_X86_NUMAQ - numaq_tsc_disable(); -#endif - intel_smp_check(c); } #else diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index fa511acff7e..09c76d26555 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -869,7 +869,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); - visws_early_detect(); /* * copy kernel address range established so far and switch diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 27aa0455fab..1d045f9c390 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -687,10 +687,6 @@ static int __init dummy_numa_init(void) void __init x86_numa_init(void) { if (!numa_off) { -#ifdef CONFIG_X86_NUMAQ - if (!numa_init(numaq_numa_init)) - return; -#endif #ifdef CONFIG_ACPI_NUMA if (!numa_init(x86_acpi_numa_init)) return; diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index e063eed0f91..5c6fc3577a4 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -13,9 +13,6 @@ obj-y += legacy.o irq.o obj-$(CONFIG_STA2X11) += sta2x11-fixup.o -obj-$(CONFIG_X86_VISWS) += visws.o - -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index d491deddeba..059a76c2973 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -567,7 +567,6 @@ char * __init pcibios_setup(char *str) pci_probe |= PCI_PROBE_NOEARLY; return NULL; } -#ifndef CONFIG_X86_VISWS else if (!strcmp(str, "usepirqmask")) { pci_probe |= PCI_USE_PIRQ_MASK; return NULL; @@ -577,9 +576,7 @@ char * __init pcibios_setup(char *str) } else if (!strncmp(str, "lastbus=", 8)) { pcibios_last_bus = simple_strtol(str+8, NULL, 0); return NULL; - } -#endif - else if (!strcmp(str, "rom")) { + } else if (!strcmp(str, "rom")) { pci_probe |= PCI_ASSIGN_ROMS; return NULL; } else if (!strcmp(str, "norom")) { diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c deleted file mode 100644 index 080eb0374ff..00000000000 --- a/arch/x86/pci/numaq_32.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * numaq_32.c - Low-level PCI access for NUMA-Q machines - */ - -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/nodemask.h> -#include <asm/apic.h> -#include <asm/mpspec.h> -#include <asm/pci_x86.h> -#include <asm/numaq.h> - -#define BUS2QUAD(global) (mp_bus_id_to_node[global]) - -#define BUS2LOCAL(global) (mp_bus_id_to_local[global]) - -#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) - -#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) - -static void write_cf8(unsigned bus, unsigned devfn, unsigned reg) -{ - unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg); - if (xquad_portio) - writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus))); - else - outl(val, 0xCF8); -} - -static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 *value) -{ - unsigned long flags; - void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); - - WARN_ON(seg); - if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) - return -EINVAL; - - raw_spin_lock_irqsave(&pci_config_lock, flags); - - write_cf8(bus, devfn, reg); - - switch (len) { - case 1: - if (xquad_portio) - *value = readb(adr + (reg & 3)); - else - *value = inb(0xCFC + (reg & 3)); - break; - case 2: - if (xquad_portio) - *value = readw(adr + (reg & 2)); - else - *value = inw(0xCFC + (reg & 2)); - break; - case 4: - if (xquad_portio) - *value = readl(adr); - else - *value = inl(0xCFC); - break; - } - - raw_spin_unlock_irqrestore(&pci_config_lock, flags); - - return 0; -} - -static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 value) -{ - unsigned long flags; - void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); - - WARN_ON(seg); - if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) - return -EINVAL; - - raw_spin_lock_irqsave(&pci_config_lock, flags); - - write_cf8(bus, devfn, reg); - - switch (len) { - case 1: - if (xquad_portio) - writeb(value, adr + (reg & 3)); - else - outb((u8)value, 0xCFC + (reg & 3)); - break; - case 2: - if (xquad_portio) - writew(value, adr + (reg & 2)); - else - outw((u16)value, 0xCFC + (reg & 2)); - break; - case 4: - if (xquad_portio) - writel(value, adr + reg); - else - outl((u32)value, 0xCFC); - break; - } - - raw_spin_unlock_irqrestore(&pci_config_lock, flags); - - return 0; -} - -#undef PCI_CONF1_MQ_ADDRESS - -static const struct pci_raw_ops pci_direct_conf1_mq = { - .read = pci_conf1_mq_read, - .write = pci_conf1_mq_write -}; - - -static void pci_fixup_i450nx(struct pci_dev *d) -{ - /* - * i450NX -- Find and scan all secondary buses on all PXB's. - */ - int pxb, reg; - u8 busno, suba, subb; - int quad = BUS2QUAD(d->bus->number); - - dev_info(&d->dev, "searching for i450NX host bridges\n"); - reg = 0xd0; - for(pxb=0; pxb<2; pxb++) { - pci_read_config_byte(d, reg++, &busno); - pci_read_config_byte(d, reg++, &suba); - pci_read_config_byte(d, reg++, &subb); - dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", - pxb, busno, suba, subb); - if (busno) { - /* Bus A */ - pcibios_scan_root(QUADLOCAL2BUS(quad, busno)); - } - if (suba < subb) { - /* Bus B */ - pcibios_scan_root(QUADLOCAL2BUS(quad, suba+1)); - } - } - pcibios_last_bus = -1; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); - -int __init pci_numaq_init(void) -{ - int quad; - - raw_pci_ops = &pci_direct_conf1_mq; - - pcibios_scan_root(0); - if (num_online_nodes() > 1) - for_each_online_node(quad) { - if (quad == 0) - continue; - printk("Scanning PCI bus %d for quad %d\n", - QUADLOCAL2BUS(quad,0), quad); - pcibios_scan_root(QUADLOCAL2BUS(quad, 0)); - } - return 0; -} diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c deleted file mode 100644 index cd9d4d1681d..00000000000 --- a/arch/x86/pci/visws.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Low-Level PCI Support for SGI Visual Workstation - * - * (c) 1999--2000 Martin Mares <mj@ucw.cz> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/setup.h> -#include <asm/pci_x86.h> -#include <asm/visws/cobalt.h> -#include <asm/visws/lithium.h> - -static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } -static void pci_visws_disable_irq(struct pci_dev *dev) { } - -/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */ -/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */ - -/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */ - - -unsigned int pci_bus0, pci_bus1; - -static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq, bus = dev->bus->number; - - pin--; - - /* Nothing useful at PIIX4 pin 1 */ - if (bus == pci_bus0 && slot == 4 && pin == 0) - return -1; - - /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */ - if (bus == pci_bus0 && slot == 4 && pin == 3) { - irq = CO_IRQ(CO_APIC_PIIX4_USB); - goto out; - } - - /* First pin spread down 1 APIC entry per slot */ - if (pin == 0) { - irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 : - CO_APIC_PCIA_BASE0) + slot); - goto out; - } - - /* lines 1,2,3 from any slot is shared in this twirly pattern */ - if (bus == pci_bus1) { - /* lines 1-3 from devices 0 1 rotate over 2 apic entries */ - irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2)); - } else { /* bus == pci_bus0 */ - /* lines 1-3 from devices 0-3 rotate over 3 apic entries */ - if (slot == 0) - slot = 3; /* same pattern */ - irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3)); - } -out: - printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq); - return irq; -} - -int __init pci_visws_init(void) -{ - pcibios_enable_irq = &pci_visws_enable_irq; - pcibios_disable_irq = &pci_visws_disable_irq; - - /* The VISWS supports configuration access type 1 only */ - pci_probe = (pci_probe | PCI_PROBE_CONF1) & - ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2); - - pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff; - pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff; - - printk(KERN_INFO "PCI: Lithium bridge A bus: %u, " - "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0); - - raw_pci_ops = &pci_direct_conf1; - pcibios_scan_root(pci_bus0); - pcibios_scan_root(pci_bus1); - pci_fixup_irqs(pci_common_swizzle, visws_map_irq); - pcibios_resource_survey(); - /* Request bus scan */ - return 1; -} diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 20342d4c82c..85afde1fa3e 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -9,5 +9,4 @@ obj-y += olpc/ obj-y += scx200/ obj-y += sfi/ obj-y += ts5500/ -obj-y += visws/ obj-y += uv/ diff --git a/arch/x86/platform/visws/Makefile b/arch/x86/platform/visws/Makefile deleted file mode 100644 index 91bc17ab2fd..00000000000 --- a/arch/x86/platform/visws/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_X86_VISWS) += visws_quirks.o diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c deleted file mode 100644 index 94d8a39332e..00000000000 --- a/arch/x86/platform/visws/visws_quirks.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * SGI Visual Workstation support and quirks, unmaintained. - * - * Split out from setup.c by davej@suse.de - * - * Copyright (C) 1999 Bent Hagemark, Ingo Molnar - * - * SGI Visual Workstation interrupt controller - * - * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC - * which serves as the main interrupt controller in the system. Non-legacy - * hardware in the system uses this controller directly. Legacy devices - * are connected to the PIIX4 which in turn has its 8259(s) connected to - * a of the Cobalt APIC entry. - * - * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com - * - * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru> - */ -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> - -#include <asm/visws/cobalt.h> -#include <asm/visws/piix4.h> -#include <asm/io_apic.h> -#include <asm/fixmap.h> -#include <asm/reboot.h> -#include <asm/setup.h> -#include <asm/apic.h> -#include <asm/e820.h> -#include <asm/time.h> -#include <asm/io.h> - -#include <linux/kernel_stat.h> - -#include <asm/i8259.h> -#include <asm/irq_vectors.h> -#include <asm/visws/lithium.h> - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/pci_ids.h> - -extern int no_broadcast; - -char visws_board_type = -1; -char visws_board_rev = -1; - -static void __init visws_time_init(void) -{ - printk(KERN_INFO "Starting Cobalt Timer system clock\n"); - - /* Set the countdown value */ - co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); - - /* Start the timer */ - co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN); - - /* Enable (unmask) the timer interrupt */ - co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); - - setup_default_timer_irq(); -} - -/* Replaces the default init_ISA_irqs in the generic setup */ -static void __init visws_pre_intr_init(void); - -/* Quirk for machine specific memory setup. */ - -#define MB (1024 * 1024) - -unsigned long sgivwfb_mem_phys; -unsigned long sgivwfb_mem_size; -EXPORT_SYMBOL(sgivwfb_mem_phys); -EXPORT_SYMBOL(sgivwfb_mem_size); - -long long mem_size __initdata = 0; - -static char * __init visws_memory_setup(void) -{ - long long gfx_mem_size = 8 * MB; - - mem_size = boot_params.alt_mem_k; - - if (!mem_size) { - printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); - mem_size = 128 * MB; - } - - /* - * this hardcodes the graphics memory to 8 MB - * it really should be sized dynamically (or at least - * set as a boot param) - */ - if (!sgivwfb_mem_size) { - printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); - sgivwfb_mem_size = 8 * MB; - } - - /* - * Trim to nearest MB - */ - sgivwfb_mem_size &= ~((1 << 20) - 1); - sgivwfb_mem_phys = mem_size - gfx_mem_size; - - e820_add_region(0, LOWMEMSIZE(), E820_RAM); - e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); - e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); - - return "PROM"; -} - -static void visws_machine_emergency_restart(void) -{ - /* - * Visual Workstations restart after this - * register is poked on the PIIX4 - */ - outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT); -} - -static void visws_machine_power_off(void) -{ - unsigned short pm_status; -/* extern unsigned int pci_bus0; */ - - while ((pm_status = inw(PMSTS_PORT)) & 0x100) - outw(pm_status, PMSTS_PORT); - - outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT); - - mdelay(10); - -#define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) - -/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */ - outl(PIIX_SPECIAL_STOP, 0xCFC); -} - -static void __init visws_get_smp_config(unsigned int early) -{ -} - -/* - * The Visual Workstation is Intel MP compliant in the hardware - * sense, but it doesn't have a BIOS(-configuration table). - * No problem for Linux. - */ - -static void __init MP_processor_info(struct mpc_cpu *m) -{ - int ver, logical_apicid; - physid_mask_t apic_cpus; - - if (!(m->cpuflag & CPU_ENABLED)) - return; - - logical_apicid = m->apicid; - printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n", - m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "", - m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8, - (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver); - - if (m->cpuflag & CPU_BOOTPROCESSOR) - boot_cpu_physical_apicid = m->apicid; - - ver = m->apicver; - if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) { - printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", - m->apicid, MAX_LOCAL_APIC); - return; - } - - apic->apicid_to_cpu_present(m->apicid, &apic_cpus); - physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus); - /* - * Validate version - */ - if (ver == 0x0) { - printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - m->apicid); - ver = 0x10; - } - apic_version[m->apicid] = ver; -} - -static void __init visws_find_smp_config(void) -{ - struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS); - unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS)); - - if (ncpus > CO_CPU_MAX) { - printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n", - ncpus, mp); - - ncpus = CO_CPU_MAX; - } - - if (ncpus > setup_max_cpus) - ncpus = setup_max_cpus; - -#ifdef CONFIG_X86_LOCAL_APIC - smp_found_config = 1; -#endif - while (ncpus--) - MP_processor_info(mp++); - - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; -} - -static void visws_trap_init(void); - -void __init visws_early_detect(void) -{ - int raw; - - visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG) - >> PIIX_GPI_BD_SHIFT; - - if (visws_board_type < 0) - return; - - /* - * Override the default platform setup functions - */ - x86_init.resources.memory_setup = visws_memory_setup; - x86_init.mpparse.get_smp_config = visws_get_smp_config; - x86_init.mpparse.find_smp_config = visws_find_smp_config; - x86_init.irqs.pre_vector_init = visws_pre_intr_init; - x86_init.irqs.trap_init = visws_trap_init; - x86_init.timers.timer_init = visws_time_init; - x86_init.pci.init = pci_visws_init; - x86_init.pci.init_irq = x86_init_noop; - - /* - * Install reboot quirks: - */ - pm_power_off = visws_machine_power_off; - machine_ops.emergency_restart = visws_machine_emergency_restart; - - /* - * Do not use broadcast IPIs: - */ - no_broadcast = 0; - -#ifdef CONFIG_X86_IO_APIC - /* - * Turn off IO-APIC detection and initialization: - */ - skip_ioapic_setup = 1; -#endif - - /* - * Get Board rev. - * First, we have to initialize the 307 part to allow us access - * to the GPIO registers. Let's map them at 0x0fc0 which is right - * after the PIIX4 PM section. - */ - outb_p(SIO_DEV_SEL, SIO_INDEX); - outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */ - - outb_p(SIO_DEV_MSB, SIO_INDEX); - outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */ - - outb_p(SIO_DEV_LSB, SIO_INDEX); - outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */ - - outb_p(SIO_DEV_ENB, SIO_INDEX); - outb_p(1, SIO_DATA); /* Enable GPIO registers. */ - - /* - * Now, we have to map the power management section to write - * a bit which enables access to the GPIO registers. - * What lunatic came up with this shit? - */ - outb_p(SIO_DEV_SEL, SIO_INDEX); - outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */ - - outb_p(SIO_DEV_MSB, SIO_INDEX); - outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */ - - outb_p(SIO_DEV_LSB, SIO_INDEX); - outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */ - - outb_p(SIO_DEV_ENB, SIO_INDEX); - outb_p(1, SIO_DATA); /* Enable PM registers. */ - - /* - * Now, write the PM register which enables the GPIO registers. - */ - outb_p(SIO_PM_FER2, SIO_PM_INDEX); - outb_p(SIO_PM_GP_EN, SIO_PM_DATA); - - /* - * Now, initialize the GPIO registers. - * We want them all to be inputs which is the - * power on default, so let's leave them alone. - * So, let's just read the board rev! - */ - raw = inb_p(SIO_GP_DATA1); - raw &= 0x7f; /* 7 bits of valid board revision ID. */ - - if (visws_board_type == VISWS_320) { - if (raw < 0x6) { - visws_board_rev = 4; - } else if (raw < 0xc) { - visws_board_rev = 5; - } else { - visws_board_rev = 6; - } - } else if (visws_board_type == VISWS_540) { - visws_board_rev = 2; - } else { - visws_board_rev = raw; - } - - printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n", - (visws_board_type == VISWS_320 ? "320" : - (visws_board_type == VISWS_540 ? "540" : - "unknown")), visws_board_rev); -} - -#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4) -#define BCD (LI_INTB | LI_INTC | LI_INTD) -#define ALLDEVS (A01234 | BCD) - -static __init void lithium_init(void) -{ - set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS); - set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS); - - if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || - (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { - printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A'); -/* panic("This machine is not SGI Visual Workstation 320/540"); */ - } - - if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || - (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { - printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B'); -/* panic("This machine is not SGI Visual Workstation 320/540"); */ - } - - li_pcia_write16(LI_PCI_INTEN, ALLDEVS); - li_pcib_write16(LI_PCI_INTEN, ALLDEVS); -} - -static __init void cobalt_init(void) -{ - /* - * On normal SMP PC this is used only with SMP, but we have to - * use it and set it up here to start the Cobalt clock - */ - set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE); - setup_local_APIC(); - printk(KERN_INFO "Local APIC Version %#x, ID %#x\n", - (unsigned int)apic_read(APIC_LVR), - (unsigned int)apic_read(APIC_ID)); - - set_fixmap(FIX_CO_CPU, CO_CPU_PHYS); - set_fixmap(FIX_CO_APIC, CO_APIC_PHYS); - printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n", - co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID)); - - /* Enable Cobalt APIC being careful to NOT change the ID! */ - co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE); - - printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n", - co_apic_read(CO_APIC_ID)); -} - -static void __init visws_trap_init(void) -{ - lithium_init(); - cobalt_init(); -} - -/* - * IRQ controller / APIC support: - */ - -static DEFINE_SPINLOCK(cobalt_lock); - -/* - * Set the given Cobalt APIC Redirection Table entry to point - * to the given IDT vector/index. - */ -static inline void co_apic_set(int entry, int irq) -{ - co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR)); - co_apic_write(CO_APIC_HI(entry), 0); -} - -/* - * Cobalt (IO)-APIC functions to handle PCI devices. - */ -static inline int co_apic_ide0_hack(void) -{ - extern char visws_board_type; - extern char visws_board_rev; - - if (visws_board_type == VISWS_320 && visws_board_rev == 5) - return 5; - return CO_APIC_IDE0; -} - -static int is_co_apic(unsigned int irq) -{ - if (IS_CO_APIC(irq)) - return CO_APIC(irq); - - switch (irq) { - case 0: return CO_APIC_CPU; - case CO_IRQ_IDE0: return co_apic_ide0_hack(); - case CO_IRQ_IDE1: return CO_APIC_IDE1; - default: return -1; - } -} - - -/* - * This is the SGI Cobalt (IO-)APIC: - */ -static void enable_cobalt_irq(struct irq_data *data) -{ - co_apic_set(is_co_apic(data->irq), data->irq); -} - -static void disable_cobalt_irq(struct irq_data *data) -{ - int entry = is_co_apic(data->irq); - - co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK); - co_apic_read(CO_APIC_LO(entry)); -} - -static void ack_cobalt_irq(struct irq_data *data) -{ - unsigned long flags; - - spin_lock_irqsave(&cobalt_lock, flags); - disable_cobalt_irq(data); - apic_write(APIC_EOI, APIC_EOI_ACK); - spin_unlock_irqrestore(&cobalt_lock, flags); -} - -static struct irq_chip cobalt_irq_type = { - .name = "Cobalt-APIC", - .irq_enable = enable_cobalt_irq, - .irq_disable = disable_cobalt_irq, - .irq_ack = ack_cobalt_irq, -}; - - -/* - * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt - * -- not the manner expected by the code in i8259.c. - * - * there is a 'master' physical interrupt source that gets sent to - * the CPU. But in the chipset there are various 'virtual' interrupts - * waiting to be handled. We represent this to Linux through a 'master' - * interrupt controller type, and through a special virtual interrupt- - * controller. Device drivers only see the virtual interrupt sources. - */ -static unsigned int startup_piix4_master_irq(struct irq_data *data) -{ - legacy_pic->init(0); - enable_cobalt_irq(data); - return 0; -} - -static struct irq_chip piix4_master_irq_type = { - .name = "PIIX4-master", - .irq_startup = startup_piix4_master_irq, - .irq_ack = ack_cobalt_irq, -}; - -static void pii4_mask(struct irq_data *data) { } - -static struct irq_chip piix4_virtual_irq_type = { - .name = "PIIX4-virtual", - .irq_mask = pii4_mask, -}; - -/* - * PIIX4-8259 master/virtual functions to handle interrupt requests - * from legacy devices: floppy, parallel, serial, rtc. - * - * None of these get Cobalt APIC entries, neither do they have IDT - * entries. These interrupts are purely virtual and distributed from - * the 'master' interrupt source: CO_IRQ_8259. - * - * When the 8259 interrupts its handler figures out which of these - * devices is interrupting and dispatches to its handler. - * - * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/ - * enable_irq gets the right irq. This 'master' irq is never directly - * manipulated by any driver. - */ -static irqreturn_t piix4_master_intr(int irq, void *dev_id) -{ - unsigned long flags; - int realirq; - - raw_spin_lock_irqsave(&i8259A_lock, flags); - - /* Find out what's interrupting in the PIIX4 master 8259 */ - outb(0x0c, 0x20); /* OCW3 Poll command */ - realirq = inb(0x20); - - /* - * Bit 7 == 0 means invalid/spurious - */ - if (unlikely(!(realirq & 0x80))) - goto out_unlock; - - realirq &= 7; - - if (unlikely(realirq == 2)) { - outb(0x0c, 0xa0); - realirq = inb(0xa0); - - if (unlikely(!(realirq & 0x80))) - goto out_unlock; - - realirq = (realirq & 7) + 8; - } - - /* mask and ack interrupt */ - cached_irq_mask |= 1 << realirq; - if (unlikely(realirq > 7)) { - inb(0xa1); - outb(cached_slave_mask, 0xa1); - outb(0x60 + (realirq & 7), 0xa0); - outb(0x60 + 2, 0x20); - } else { - inb(0x21); - outb(cached_master_mask, 0x21); - outb(0x60 + realirq, 0x20); - } - - raw_spin_unlock_irqrestore(&i8259A_lock, flags); - - /* - * handle this 'virtual interrupt' as a Cobalt one now. - */ - generic_handle_irq(realirq); - - return IRQ_HANDLED; - -out_unlock: - raw_spin_unlock_irqrestore(&i8259A_lock, flags); - return IRQ_NONE; -} - -static struct irqaction master_action = { - .handler = piix4_master_intr, - .name = "PIIX4-8259", - .flags = IRQF_NO_THREAD, -}; - -static struct irqaction cascade_action = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD, -}; - -static inline void set_piix4_virtual_irq_type(void) -{ - piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask; - piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask; - piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask; -} - -static void __init visws_pre_intr_init(void) -{ - int i; - - set_piix4_virtual_irq_type(); - - for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) { - struct irq_chip *chip = NULL; - - if (i == 0) - chip = &cobalt_irq_type; - else if (i == CO_IRQ_IDE0) - chip = &cobalt_irq_type; - else if (i == CO_IRQ_IDE1) - chip = &cobalt_irq_type; - else if (i == CO_IRQ_8259) - chip = &piix4_master_irq_type; - else if (i < CO_IRQ_APIC0) - chip = &piix4_virtual_irq_type; - else if (IS_CO_APIC(i)) - chip = &cobalt_irq_type; - - if (chip) - irq_set_chip(i, chip); - } - - setup_irq(CO_IRQ_8259, &master_action); - setup_irq(2, &cascade_action); -} diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 01b90261fa3..9c50cc2e403 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -7,7 +7,7 @@ config XEN depends on PARAVIRT select PARAVIRT_CLOCK select XEN_HAVE_PVMMU - depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS) + depends on X86_64 || (X86_32 && X86_PAE) depends on X86_TSC help This is the Linux Xen port. Enabling this will allow the diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index aed3488d942..f3fe4cb4974 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,6 +1,5 @@ obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o -obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c deleted file mode 100644 index 9e0998f2288..00000000000 --- a/drivers/clocksource/cyclone.c +++ /dev/null @@ -1,113 +0,0 @@ -#include <linux/clocksource.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/timex.h> -#include <linux/init.h> - -#include <asm/pgtable.h> -#include <asm/io.h> - -#include <asm/mach_timer.h> - -#define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */ -#define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */ -#define CYCLONE_MPCS_OFFSET 0x51A8 /* offset to select register */ -#define CYCLONE_MPMC_OFFSET 0x51D0 /* offset to count register */ -#define CYCLONE_TIMER_FREQ 99780000 /* 100Mhz, but not really */ -#define CYCLONE_TIMER_MASK CLOCKSOURCE_MASK(32) /* 32 bit mask */ - -int use_cyclone = 0; -static void __iomem *cyclone_ptr; - -static cycle_t read_cyclone(struct clocksource *cs) -{ - return (cycle_t)readl(cyclone_ptr); -} - -static struct clocksource clocksource_cyclone = { - .name = "cyclone", - .rating = 250, - .read = read_cyclone, - .mask = CYCLONE_TIMER_MASK, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init init_cyclone_clocksource(void) -{ - unsigned long base; /* saved value from CBAR */ - unsigned long offset; - u32 __iomem* volatile cyclone_timer; /* Cyclone MPMC0 register */ - u32 __iomem* reg; - int i; - - /* make sure we're on a summit box: */ - if (!use_cyclone) - return -ENODEV; - - printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); - - /* find base address: */ - offset = CYCLONE_CBAR_ADDR; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n"); - return -ENODEV; - } - /* even on 64bit systems, this is only 32bits: */ - base = readl(reg); - iounmap(reg); - if (!base) { - printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n"); - return -ENODEV; - } - - /* setup PMCC: */ - offset = base + CYCLONE_PMCC_OFFSET; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n"); - return -ENODEV; - } - writel(0x00000001,reg); - iounmap(reg); - - /* setup MPCS: */ - offset = base + CYCLONE_MPCS_OFFSET; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n"); - return -ENODEV; - } - writel(0x00000001,reg); - iounmap(reg); - - /* map in cyclone_timer: */ - offset = base + CYCLONE_MPMC_OFFSET; - cyclone_timer = ioremap_nocache(offset, sizeof(u64)); - if (!cyclone_timer) { - printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n"); - return -ENODEV; - } - - /* quick test to make sure its ticking: */ - for (i = 0; i < 3; i++){ - u32 old = readl(cyclone_timer); - int stall = 100; - - while (stall--) - barrier(); - - if (readl(cyclone_timer) == old) { - printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n"); - iounmap(cyclone_timer); - cyclone_timer = NULL; - return -ENODEV; - } - } - cyclone_ptr = cyclone_timer; - - return clocksource_register_hz(&clocksource_cyclone, - CYCLONE_TIMER_FREQ); -} - -arch_initcall(init_cyclone_clocksource); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index e2501ac6fe8..e04fe2d9df3 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_ARM) += setup-irq.o obj-$(CONFIG_UNICORE32) += setup-irq.o obj-$(CONFIG_SUPERH) += setup-irq.o obj-$(CONFIG_MIPS) += setup-irq.o -obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_TILE) += setup-irq.o obj-$(CONFIG_SPARC_LEON) += setup-irq.o obj-$(CONFIG_M68K) += setup-irq.o diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 97dabd39b09..158020522df 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -379,14 +379,7 @@ #define DEBUG_PRINT_NVRAM 0 #define DEBUG_QLA1280 0 -/* - * The SGI VISWS is broken and doesn't support MMIO ;-( - */ -#ifdef CONFIG_X86_VISWS -#define MEMORY_MAPPED_IO 0 -#else #define MEMORY_MAPPED_IO 1 -#endif #include "qla1280.h" diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 97a8f3a12a7..b4b209ce802 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -796,18 +796,9 @@ config FB_HGA As this card technology is at least 25 years old, most people will answer N here. -config FB_SGIVW - tristate "SGI Visual Workstation framebuffer support" - depends on FB && X86_VISWS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - SGI Visual Workstation support for framebuffer graphics. - config FB_GBE bool "SGI Graphics Backend frame buffer support" - depends on (FB = y) && (SGI_IP32 || X86_VISWS) + depends on (FB = y) && SGI_IP32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 08d6a4ab3ac..1be26fe1059 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \ atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 4c7cb368a9d..3ec65a878ac 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -45,10 +45,6 @@ struct gbefb_par { #define GBE_BASE 0x16000000 /* SGI O2 */ #endif -#ifdef CONFIG_X86_VISWS -#define GBE_BASE 0xd0000000 /* SGI Visual Workstation */ -#endif - /* macro for fastest write-though access to the framebuffer */ #ifdef CONFIG_MIPS #ifdef CONFIG_CPU_R10000 diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig index 39ac49e0682..0037104d66a 100644 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig @@ -54,7 +54,7 @@ config LOGO_PARISC_CLUT224 config LOGO_SGI_CLUT224 bool "224-color SGI Linux logo" - depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS + depends on SGI_IP22 || SGI_IP27 || SGI_IP32 default y config LOGO_SUN_CLUT224 diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index b670cbda38e..940cd196eef 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -81,7 +81,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth) logo = &logo_parisc_clut224; #endif #ifdef CONFIG_LOGO_SGI_CLUT224 - /* SGI Linux logo on MIPS/MIPS64 and VISWS */ + /* SGI Linux logo on MIPS/MIPS64 */ logo = &logo_sgi_clut224; #endif #ifdef CONFIG_LOGO_SUN_CLUT224 diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c deleted file mode 100644 index bc74d040899..00000000000 --- a/drivers/video/sgivwfb.c +++ /dev/null @@ -1,889 +0,0 @@ -/* - * linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Jeffrey Newquist, newquist@engr.sgi.som - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/fb.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/mtrr.h> -#include <asm/visws/sgivw.h> - -#define INCLUDE_TIMING_TABLE_DATA -#define DBE_REG_BASE par->regs -#include <video/sgivw.h> - -struct sgivw_par { - struct asregs *regs; - u32 cmap_fifo; - u_long timing_num; -}; - -#define FLATPANEL_SGI_1600SW 5 - -/* - * RAM we reserve for the frame buffer. This defines the maximum screen - * size - * - * The default can be overridden if the driver is compiled as a module - */ - -static int ypan = 0; -static int ywrap = 0; - -static int flatpanel_id = -1; - -static struct fb_fix_screeninfo sgivwfb_fix = { - .id = "SGI Vis WS FB", - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_PSEUDOCOLOR, - .mmio_start = DBE_REG_PHYS, - .mmio_len = DBE_REG_SIZE, - .accel = FB_ACCEL_NONE, - .line_length = 640, -}; - -static struct fb_var_screeninfo sgivwfb_var = { - /* 640x480, 8 bpp */ - .xres = 640, - .yres = 480, - .xres_virtual = 640, - .yres_virtual = 480, - .bits_per_pixel = 8, - .red = { 0, 8, 0 }, - .green = { 0, 8, 0 }, - .blue = { 0, 8, 0 }, - .height = -1, - .width = -1, - .pixclock = 20000, - .left_margin = 64, - .right_margin = 64, - .upper_margin = 32, - .lower_margin = 32, - .hsync_len = 64, - .vsync_len = 2, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_var_screeninfo sgivwfb_var1600sw = { - /* 1600x1024, 8 bpp */ - .xres = 1600, - .yres = 1024, - .xres_virtual = 1600, - .yres_virtual = 1024, - .bits_per_pixel = 8, - .red = { 0, 8, 0 }, - .green = { 0, 8, 0 }, - .blue = { 0, 8, 0 }, - .height = -1, - .width = -1, - .pixclock = 9353, - .left_margin = 20, - .right_margin = 30, - .upper_margin = 37, - .lower_margin = 3, - .hsync_len = 20, - .vsync_len = 3, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* - * Interface used by the world - */ -int sgivwfb_init(void); - -static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); -static int sgivwfb_set_par(struct fb_info *info); -static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green, - u_int blue, u_int transp, - struct fb_info *info); -static int sgivwfb_mmap(struct fb_info *info, - struct vm_area_struct *vma); - -static struct fb_ops sgivwfb_ops = { - .owner = THIS_MODULE, - .fb_check_var = sgivwfb_check_var, - .fb_set_par = sgivwfb_set_par, - .fb_setcolreg = sgivwfb_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, - .fb_mmap = sgivwfb_mmap, -}; - -/* - * Internal routines - */ -static unsigned long bytes_per_pixel(int bpp) -{ - switch (bpp) { - case 8: - return 1; - case 16: - return 2; - case 32: - return 4; - default: - printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp); - return 0; - } -} - -static unsigned long get_line_length(int xres_virtual, int bpp) -{ - return (xres_virtual * bytes_per_pixel(bpp)); -} - -/* - * Function: dbe_TurnOffDma - * Parameters: (None) - * Description: This should turn off the monitor and dbe. This is used - * when switching between the serial console and the graphics - * console. - */ - -static void dbe_TurnOffDma(struct sgivw_par *par) -{ - unsigned int readVal; - int i; - - // Check to see if things are already turned off: - // 1) Check to see if dbe is not using the internal dotclock. - // 2) Check to see if the xy counter in dbe is already off. - - DBE_GETREG(ctrlstat, readVal); - if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2) - return; - - DBE_GETREG(vt_xy, readVal); - if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) - return; - - // Otherwise, turn off dbe - - DBE_GETREG(ovr_control, readVal); - SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0); - DBE_SETREG(ovr_control, readVal); - udelay(1000); - DBE_GETREG(frm_control, readVal); - SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0); - DBE_SETREG(frm_control, readVal); - udelay(1000); - DBE_GETREG(did_control, readVal); - SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0); - DBE_SETREG(did_control, readVal); - udelay(1000); - - // XXX HACK: - // - // This was necessary for GBE--we had to wait through two - // vertical retrace periods before the pixel DMA was - // turned off for sure. I've left this in for now, in - // case dbe needs it. - - for (i = 0; i < 10000; i++) { - DBE_GETREG(frm_inhwctrl, readVal); - if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) == - 0) - udelay(10); - else { - DBE_GETREG(ovr_inhwctrl, readVal); - if (GET_DBE_FIELD - (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0) - udelay(10); - else { - DBE_GETREG(did_inhwctrl, readVal); - if (GET_DBE_FIELD - (DID_INHWCTRL, DID_DMA_ENABLE, - readVal) == 0) - udelay(10); - else - break; - } - } - } -} - -/* - * Set the User Defined Part of the Display. Again if par use it to get - * real video mode. - */ -static int sgivwfb_check_var(struct fb_var_screeninfo *var, - struct fb_info *info) -{ - struct sgivw_par *par = (struct sgivw_par *)info->par; - struct dbe_timing_info *timing; - u_long line_length; - u_long min_mode; - int req_dot; - int test_mode; - - /* - * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal! - * as FB_VMODE_SMOOTH_XPAN is only used internally - */ - - if (var->vmode & FB_VMODE_CONUPDATE) { - var->vmode |= FB_VMODE_YWRAP; - var->xoffset = info->var.xoffset; - var->yoffset = info->var.yoffset; - } - - /* XXX FIXME - forcing var's */ - var->xoffset = 0; - var->yoffset = 0; - - /* Limit bpp to 8, 16, and 32 */ - if (var->bits_per_pixel <= 8) - var->bits_per_pixel = 8; - else if (var->bits_per_pixel <= 16) - var->bits_per_pixel = 16; - else if (var->bits_per_pixel <= 32) - var->bits_per_pixel = 32; - else - return -EINVAL; - - var->grayscale = 0; /* No grayscale for now */ - - /* determine valid resolution and timing */ - for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) { - if (dbeVTimings[min_mode].width >= var->xres && - dbeVTimings[min_mode].height >= var->yres) - break; - } - - if (min_mode == ARRAY_SIZE(dbeVTimings)) - return -EINVAL; /* Resolution to high */ - - /* XXX FIXME - should try to pick best refresh rate */ - /* for now, pick closest dot-clock within 3MHz */ - req_dot = PICOS2KHZ(var->pixclock); - printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n", - var->pixclock, req_dot); - test_mode = min_mode; - while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) { - if (dbeVTimings[test_mode].cfreq + 3000 > req_dot) - break; - test_mode++; - } - if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width) - test_mode--; - min_mode = test_mode; - timing = &dbeVTimings[min_mode]; - printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq); - - /* Adjust virtual resolution, if necessary */ - if (var->xres > var->xres_virtual || (!ywrap && !ypan)) - var->xres_virtual = var->xres; - if (var->yres > var->yres_virtual || (!ywrap && !ypan)) - var->yres_virtual = var->yres; - - /* - * Memory limit - */ - line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); - if (line_length * var->yres_virtual > sgivwfb_mem_size) - return -ENOMEM; /* Virtual resolution to high */ - - info->fix.line_length = line_length; - - switch (var->bits_per_pixel) { - case 8: - var->red.offset = 0; - var->red.length = 8; - var->green.offset = 0; - var->green.length = 8; - var->blue.offset = 0; - var->blue.length = 8; - var->transp.offset = 0; - var->transp.length = 0; - break; - case 16: /* RGBA 5551 */ - var->red.offset = 11; - var->red.length = 5; - var->green.offset = 6; - var->green.length = 5; - var->blue.offset = 1; - var->blue.length = 5; - var->transp.offset = 0; - var->transp.length = 0; - break; - case 32: /* RGB 8888 */ - var->red.offset = 0; - var->red.length = 8; - var->green.offset = 8; - var->green.length = 8; - var->blue.offset = 16; - var->blue.length = 8; - var->transp.offset = 24; - var->transp.length = 8; - break; - } - var->red.msb_right = 0; - var->green.msb_right = 0; - var->blue.msb_right = 0; - var->transp.msb_right = 0; - - /* set video timing information */ - var->pixclock = KHZ2PICOS(timing->cfreq); - var->left_margin = timing->htotal - timing->hsync_end; - var->right_margin = timing->hsync_start - timing->width; - var->upper_margin = timing->vtotal - timing->vsync_end; - var->lower_margin = timing->vsync_start - timing->height; - var->hsync_len = timing->hsync_end - timing->hsync_start; - var->vsync_len = timing->vsync_end - timing->vsync_start; - - /* Ouch. This breaks the rules but timing_num is only important if you - * change a video mode */ - par->timing_num = min_mode; - - printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n", - var->xres, var->yres, var->bits_per_pixel); - printk(KERN_INFO " vxres=%d vyres=%d\n", var->xres_virtual, - var->yres_virtual); - return 0; -} - -/* - * Setup flatpanel related registers. - */ -static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming) -{ - int fp_wid, fp_hgt, fp_vbs, fp_vbe; - u32 outputVal = 0; - - SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, - (currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1); - SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, - (currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1); - DBE_SETREG(vt_flags, outputVal); - - /* Turn on the flat panel */ - switch (flatpanel_id) { - case FLATPANEL_SGI_1600SW: - fp_wid = 1600; - fp_hgt = 1024; - fp_vbs = 0; - fp_vbe = 1600; - currentTiming->pll_m = 4; - currentTiming->pll_n = 1; - currentTiming->pll_p = 0; - break; - default: - fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff; - } - - outputVal = 0; - SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs); - SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe); - DBE_SETREG(fp_de, outputVal); - outputVal = 0; - SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid); - DBE_SETREG(fp_hdrv, outputVal); - outputVal = 0; - SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1); - SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1); - DBE_SETREG(fp_vdrv, outputVal); -} - -/* - * Set the hardware according to 'par'. - */ -static int sgivwfb_set_par(struct fb_info *info) -{ - struct sgivw_par *par = info->par; - int i, j, htmp, temp; - u32 readVal, outputVal; - int wholeTilesX, maxPixelsPerTileX; - int frmWrite1, frmWrite2, frmWrite3b; - struct dbe_timing_info *currentTiming; /* Current Video Timing */ - int xpmax, ypmax; // Monitor resolution - int bytesPerPixel; // Bytes per pixel - - currentTiming = &dbeVTimings[par->timing_num]; - bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel); - xpmax = currentTiming->width; - ypmax = currentTiming->height; - - /* dbe_InitGraphicsBase(); */ - /* Turn on dotclock PLL */ - DBE_SETREG(ctrlstat, 0x20000000); - - dbe_TurnOffDma(par); - - /* dbe_CalculateScreenParams(); */ - maxPixelsPerTileX = 512 / bytesPerPixel; - wholeTilesX = xpmax / maxPixelsPerTileX; - if (wholeTilesX * maxPixelsPerTileX < xpmax) - wholeTilesX++; - - printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n", - maxPixelsPerTileX, wholeTilesX); - - /* dbe_InitGammaMap(); */ - udelay(10); - - for (i = 0; i < 256; i++) { - DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8)); - } - - /* dbe_TurnOn(); */ - DBE_GETREG(vt_xy, readVal); - if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) { - DBE_SETREG(vt_xy, 0x00000000); - udelay(1); - } else - dbe_TurnOffDma(par); - - /* dbe_Initdbe(); */ - for (i = 0; i < 256; i++) { - for (j = 0; j < 100; j++) { - DBE_GETREG(cm_fifo, readVal); - if (readVal != 0x00000000) - break; - else - udelay(10); - } - - // DBE_ISETREG(cmap, i, 0x00000000); - DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24)); - } - - /* dbe_InitFramebuffer(); */ - frmWrite1 = 0; - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1, - wholeTilesX); - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0); - - switch (bytesPerPixel) { - case 1: - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1, - DBE_FRM_DEPTH_8); - break; - case 2: - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1, - DBE_FRM_DEPTH_16); - break; - case 4: - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1, - DBE_FRM_DEPTH_32); - break; - } - - frmWrite2 = 0; - SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax); - - // Tell dbe about the framebuffer location and type - // XXX What format is the FRM_TILE_PTR?? 64K aligned address? - frmWrite3b = 0; - SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b, - sgivwfb_mem_phys >> 9); - SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1); - SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1); - - /* Initialize DIDs */ - - outputVal = 0; - switch (bytesPerPixel) { - case 1: - SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8); - break; - case 2: - SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5); - break; - case 4: - SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8); - break; - } - SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH); - - for (i = 0; i < 32; i++) { - DBE_ISETREG(mode_regs, i, outputVal); - } - - /* dbe_InitTiming(); */ - DBE_SETREG(vt_intr01, 0xffffffff); - DBE_SETREG(vt_intr23, 0xffffffff); - - DBE_GETREG(dotclock, readVal); - DBE_SETREG(dotclock, readVal & 0xffff); - - DBE_SETREG(vt_xymax, 0x00000000); - outputVal = 0; - SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal, - currentTiming->vsync_start); - SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal, - currentTiming->vsync_end); - DBE_SETREG(vt_vsync, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal, - currentTiming->hsync_start); - SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal, - currentTiming->hsync_end); - DBE_SETREG(vt_hsync, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal, - currentTiming->vblank_start); - SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal, - currentTiming->vblank_end); - DBE_SETREG(vt_vblank, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal, - currentTiming->hblank_start); - SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal, - currentTiming->hblank_end - 3); - DBE_SETREG(vt_hblank, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal, - currentTiming->vblank_start); - SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal, - currentTiming->vblank_end); - DBE_SETREG(vt_vcmap, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal, - currentTiming->hblank_start); - SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal, - currentTiming->hblank_end - 3); - DBE_SETREG(vt_hcmap, outputVal); - - if (flatpanel_id != -1) - sgivwfb_setup_flatpanel(par, currentTiming); - - outputVal = 0; - temp = currentTiming->vblank_start - currentTiming->vblank_end - 1; - if (temp > 0) - temp = -temp; - - SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp); - if (currentTiming->hblank_end >= 20) - SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal, - currentTiming->hblank_end - 20); - else - SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal, - currentTiming->htotal - (20 - - currentTiming-> - hblank_end)); - DBE_SETREG(did_start_xy, outputVal); - - outputVal = 0; - SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal, - (u32) (temp + 1)); - if (currentTiming->hblank_end >= DBE_CRS_MAGIC) - SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal, - currentTiming->hblank_end - DBE_CRS_MAGIC); - else - SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal, - currentTiming->htotal - (DBE_CRS_MAGIC - - currentTiming-> - hblank_end)); - DBE_SETREG(crs_start_xy, outputVal); - - outputVal = 0; - SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp); - SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal, - currentTiming->hblank_end - 4); - DBE_SETREG(vc_start_xy, outputVal); - - DBE_SETREG(frm_size_tile, frmWrite1); - DBE_SETREG(frm_size_pixel, frmWrite2); - - outputVal = 0; - SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1); - SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1); - SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p); - SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1); - DBE_SETREG(dotclock, outputVal); - - udelay(11 * 1000); - - DBE_SETREG(vt_vpixen, 0xffffff); - DBE_SETREG(vt_hpixen, 0xffffff); - - outputVal = 0; - SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal); - SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal); - DBE_SETREG(vt_xymax, outputVal); - - outputVal = frmWrite1; - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1); - DBE_SETREG(frm_size_tile, outputVal); - DBE_SETREG(frm_size_tile, frmWrite1); - - outputVal = 0; - SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1); - DBE_SETREG(ovr_width_tile, outputVal); - DBE_SETREG(ovr_width_tile, 0); - - DBE_SETREG(frm_control, frmWrite3b); - DBE_SETREG(did_control, 0); - - // Wait for dbe to take frame settings - for (i = 0; i < 100000; i++) { - DBE_GETREG(frm_inhwctrl, readVal); - if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) != - 0) - break; - else - udelay(1); - } - - if (i == 100000) - printk(KERN_INFO - "sgivwfb: timeout waiting for frame DMA enable.\n"); - - outputVal = 0; - htmp = currentTiming->hblank_end - 19; - if (htmp < 0) - htmp += currentTiming->htotal; /* allow blank to wrap around */ - SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp); - SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal, - ((htmp + currentTiming->width - - 2) % currentTiming->htotal)); - DBE_SETREG(vt_hpixen, outputVal); - - outputVal = 0; - SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal, - currentTiming->vblank_start); - SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal, - currentTiming->vblank_end); - DBE_SETREG(vt_vpixen, outputVal); - - // Turn off mouse cursor - par->regs->crs_ctl = 0; - - // XXX What's this section for?? - DBE_GETREG(ctrlstat, readVal); - readVal &= 0x02000000; - - if (readVal != 0) { - DBE_SETREG(ctrlstat, 0x30000000); - } - return 0; -} - -/* - * Set a single color register. The values supplied are already - * rounded down to the hardware's capabilities (according to the - * entries in the var structure). Return != 0 for invalid regno. - */ - -static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green, - u_int blue, u_int transp, - struct fb_info *info) -{ - struct sgivw_par *par = (struct sgivw_par *) info->par; - - if (regno > 255) - return 1; - red >>= 8; - green >>= 8; - blue >>= 8; - - /* wait for the color map FIFO to have a free entry */ - while (par->cmap_fifo == 0) - par->cmap_fifo = par->regs->cm_fifo; - - par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8); - par->cmap_fifo--; /* assume FIFO is filling up */ - return 0; -} - -static int sgivwfb_mmap(struct fb_info *info, - struct vm_area_struct *vma) -{ - int r; - - pgprot_val(vma->vm_page_prot) = - pgprot_val(vma->vm_page_prot) | _PAGE_PCD; - - r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size); - - printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n", - sgivwfb_mem_phys + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start); - - return r; -} - -int __init sgivwfb_setup(char *options) -{ - char *this_opt; - - if (!options || !*options) - return 0; - - while ((this_opt = strsep(&options, ",")) != NULL) { - if (!strncmp(this_opt, "monitor:", 8)) { - if (!strncmp(this_opt + 8, "crt", 3)) - flatpanel_id = -1; - else if (!strncmp(this_opt + 8, "1600sw", 6)) - flatpanel_id = FLATPANEL_SGI_1600SW; - } - } - return 0; -} - -/* - * Initialisation - */ -static int sgivwfb_probe(struct platform_device *dev) -{ - struct sgivw_par *par; - struct fb_info *info; - char *monitor; - - info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 16, &dev->dev); - if (!info) - return -ENOMEM; - par = info->par; - - if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) { - printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n"); - framebuffer_release(info); - return -EBUSY; - } - - par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE); - if (!par->regs) { - printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n"); - goto fail_ioremap_regs; - } - - mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1); - - sgivwfb_fix.smem_start = sgivwfb_mem_phys; - sgivwfb_fix.smem_len = sgivwfb_mem_size; - sgivwfb_fix.ywrapstep = ywrap; - sgivwfb_fix.ypanstep = ypan; - - info->fix = sgivwfb_fix; - - switch (flatpanel_id) { - case FLATPANEL_SGI_1600SW: - info->var = sgivwfb_var1600sw; - monitor = "SGI 1600SW flatpanel"; - break; - default: - info->var = sgivwfb_var; - monitor = "CRT"; - } - - printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor); - - info->fbops = &sgivwfb_ops; - info->pseudo_palette = (void *) (par + 1); - info->flags = FBINFO_DEFAULT; - - info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size); - if (!info->screen_base) { - printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n"); - goto fail_ioremap_fbmem; - } - - if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) - goto fail_color_map; - - if (register_framebuffer(info) < 0) { - printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n"); - goto fail_register_framebuffer; - } - - platform_set_drvdata(dev, info); - - fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n", - sgivwfb_mem_size >> 10, sgivwfb_mem_phys); - return 0; - -fail_register_framebuffer: - fb_dealloc_cmap(&info->cmap); -fail_color_map: - iounmap((char *) info->screen_base); -fail_ioremap_fbmem: - iounmap(par->regs); -fail_ioremap_regs: - release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE); - framebuffer_release(info); - return -ENXIO; -} - -static int sgivwfb_remove(struct platform_device *dev) -{ - struct fb_info *info = platform_get_drvdata(dev); - - if (info) { - struct sgivw_par *par = info->par; - - unregister_framebuffer(info); - dbe_TurnOffDma(par); - iounmap(par->regs); - iounmap(info->screen_base); - release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE); - fb_dealloc_cmap(&info->cmap); - framebuffer_release(info); - } - return 0; -} - -static struct platform_driver sgivwfb_driver = { - .probe = sgivwfb_probe, - .remove = sgivwfb_remove, - .driver = { - .name = "sgivwfb", - }, -}; - -static struct platform_device *sgivwfb_device; - -int __init sgivwfb_init(void) -{ - int ret; - -#ifndef MODULE - char *option = NULL; - - if (fb_get_options("sgivwfb", &option)) - return -ENODEV; - sgivwfb_setup(option); -#endif - ret = platform_driver_register(&sgivwfb_driver); - if (!ret) { - sgivwfb_device = platform_device_alloc("sgivwfb", 0); - if (sgivwfb_device) { - ret = platform_device_add(sgivwfb_device); - } else - ret = -ENOMEM; - if (ret) { - platform_driver_unregister(&sgivwfb_driver); - platform_device_put(sgivwfb_device); - } - } - return ret; -} - -module_init(sgivwfb_init); - -#ifdef MODULE -MODULE_LICENSE("GPL"); - -static void __exit sgivwfb_exit(void) -{ - platform_device_unregister(sgivwfb_device); - platform_driver_unregister(&sgivwfb_driver); -} - -module_exit(sgivwfb_exit); - -#endif /* MODULE */ diff --git a/include/video/sgivw.h b/include/video/sgivw.h deleted file mode 100644 index f6aa5692e74..00000000000 --- a/include/video/sgivw.h +++ /dev/null @@ -1,681 +0,0 @@ -/* - * linux/drivers/video/sgivw.h -- SGI DBE frame buffer device header - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Jeffrey Newquist, newquist@engr.sgi.som - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef __SGIVWFB_H__ -#define __SGIVWFB_H__ - -#define DBE_GETREG(reg, dest) ((dest) = DBE_REG_BASE->reg) -#define DBE_SETREG(reg, src) DBE_REG_BASE->reg = (src) -#define DBE_IGETREG(reg, idx, dest) ((dest) = DBE_REG_BASE->reg[idx]) -#define DBE_ISETREG(reg, idx, src) (DBE_REG_BASE->reg[idx] = (src)) - -#define MASK(msb, lsb) ( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) ) -#define GET(v, msb, lsb) ( ((u32)(v) & MASK(msb,lsb)) >> (lsb) ) -#define SET(v, f, msb, lsb) ( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) ) - -#define GET_DBE_FIELD(reg, field, v) GET((v), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB) -#define SET_DBE_FIELD(reg, field, v, f) SET((v), (f), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB) - -/* NOTE: All loads/stores must be 32 bits and uncached */ - -#define DBE_REG_PHYS 0xd0000000 -#define DBE_REG_SIZE 0x01000000 - -struct asregs { - volatile u32 ctrlstat; /* 0x000000 general control */ - volatile u32 dotclock; /* 0x000004 dot clock PLL control */ - volatile u32 i2c; /* 0x000008 crt I2C control */ - volatile u32 sysclk; /* 0x00000c system clock PLL control */ - volatile u32 i2cfp; /* 0x000010 flat panel I2C control */ - volatile u32 id; /* 0x000014 device id/chip revision */ - volatile u32 config; /* 0x000018 power on configuration */ - volatile u32 bist; /* 0x00001c internal bist status */ - - char _pad0[ 0x010000 - 0x000020 ]; - - volatile u32 vt_xy; /* 0x010000 current dot coords */ - volatile u32 vt_xymax; /* 0x010004 maximum dot coords */ - volatile u32 vt_vsync; /* 0x010008 vsync on/off */ - volatile u32 vt_hsync; /* 0x01000c hsync on/off */ - volatile u32 vt_vblank; /* 0x010010 vblank on/off */ - volatile u32 vt_hblank; /* 0x010014 hblank on/off */ - volatile u32 vt_flags; /* 0x010018 polarity of vt signals */ - volatile u32 vt_f2rf_lock; /* 0x01001c f2rf & framelck y coord */ - volatile u32 vt_intr01; /* 0x010020 intr 0,1 y coords */ - volatile u32 vt_intr23; /* 0x010024 intr 2,3 y coords */ - volatile u32 fp_hdrv; /* 0x010028 flat panel hdrv on/off */ - volatile u32 fp_vdrv; /* 0x01002c flat panel vdrv on/off */ - volatile u32 fp_de; /* 0x010030 flat panel de on/off */ - volatile u32 vt_hpixen; /* 0x010034 intrnl horiz pixel on/off*/ - volatile u32 vt_vpixen; /* 0x010038 intrnl vert pixel on/off */ - volatile u32 vt_hcmap; /* 0x01003c cmap write (horiz) */ - volatile u32 vt_vcmap; /* 0x010040 cmap write (vert) */ - volatile u32 did_start_xy; /* 0x010044 eol/f did/xy reset val */ - volatile u32 crs_start_xy; /* 0x010048 eol/f crs/xy reset val */ - volatile u32 vc_start_xy; /* 0x01004c eol/f vc/xy reset val */ - - char _pad1[ 0x020000 - 0x010050 ]; - - volatile u32 ovr_width_tile; /* 0x020000 overlay plane ctrl 0 */ - volatile u32 ovr_inhwctrl; /* 0x020004 overlay plane ctrl 1 */ - volatile u32 ovr_control; /* 0x020008 overlay plane ctrl 1 */ - - char _pad2[ 0x030000 - 0x02000C ]; - - volatile u32 frm_size_tile; /* 0x030000 normal plane ctrl 0 */ - volatile u32 frm_size_pixel; /* 0x030004 normal plane ctrl 1 */ - volatile u32 frm_inhwctrl; /* 0x030008 normal plane ctrl 2 */ - volatile u32 frm_control; /* 0x03000C normal plane ctrl 3 */ - - char _pad3[ 0x040000 - 0x030010 ]; - - volatile u32 did_inhwctrl; /* 0x040000 DID control */ - volatile u32 did_control; /* 0x040004 DID shadow */ - - char _pad4[ 0x048000 - 0x040008 ]; - - volatile u32 mode_regs[32]; /* 0x048000 - 0x04807c WID table */ - - char _pad5[ 0x050000 - 0x048080 ]; - - volatile u32 cmap[6144]; /* 0x050000 - 0x055ffc color map */ - - char _pad6[ 0x058000 - 0x056000 ]; - - volatile u32 cm_fifo; /* 0x058000 color map fifo status */ - - char _pad7[ 0x060000 - 0x058004 ]; - - volatile u32 gmap[256]; /* 0x060000 - 0x0603fc gamma map */ - - char _pad8[ 0x068000 - 0x060400 ]; - - volatile u32 gmap10[1024]; /* 0x068000 - 0x068ffc gamma map */ - - char _pad9[ 0x070000 - 0x069000 ]; - - volatile u32 crs_pos; /* 0x070000 cusror control 0 */ - volatile u32 crs_ctl; /* 0x070004 cusror control 1 */ - volatile u32 crs_cmap[3]; /* 0x070008 - 0x070010 crs cmap */ - - char _pad10[ 0x078000 - 0x070014 ]; - - volatile u32 crs_glyph[64]; /* 0x078000 - 0x0780fc crs glyph */ - - char _pad11[ 0x080000 - 0x078100 ]; - - volatile u32 vc_0; /* 0x080000 video capture crtl 0 */ - volatile u32 vc_1; /* 0x080004 video capture crtl 1 */ - volatile u32 vc_2; /* 0x080008 video capture crtl 2 */ - volatile u32 vc_3; /* 0x08000c video capture crtl 3 */ - volatile u32 vc_4; /* 0x080010 video capture crtl 3 */ - volatile u32 vc_5; /* 0x080014 video capture crtl 3 */ - volatile u32 vc_6; /* 0x080018 video capture crtl 3 */ - volatile u32 vc_7; /* 0x08001c video capture crtl 3 */ - volatile u32 vc_8; /* 0x08000c video capture crtl 3 */ -}; - -/* Bit mask information */ - -#define DBE_CTRLSTAT_CHIPID_MSB 3 -#define DBE_CTRLSTAT_CHIPID_LSB 0 -#define DBE_CTRLSTAT_SENSE_N_MSB 4 -#define DBE_CTRLSTAT_SENSE_N_LSB 4 -#define DBE_CTRLSTAT_PCLKSEL_MSB 29 -#define DBE_CTRLSTAT_PCLKSEL_LSB 28 - -#define DBE_DOTCLK_M_MSB 7 -#define DBE_DOTCLK_M_LSB 0 -#define DBE_DOTCLK_N_MSB 13 -#define DBE_DOTCLK_N_LSB 8 -#define DBE_DOTCLK_P_MSB 15 -#define DBE_DOTCLK_P_LSB 14 -#define DBE_DOTCLK_RUN_MSB 20 -#define DBE_DOTCLK_RUN_LSB 20 - -#define DBE_VT_XY_VT_FREEZE_MSB 31 -#define DBE_VT_XY_VT_FREEZE_LSB 31 - -#define DBE_FP_VDRV_FP_VDRV_ON_MSB 23 -#define DBE_FP_VDRV_FP_VDRV_ON_LSB 12 -#define DBE_FP_VDRV_FP_VDRV_OFF_MSB 11 -#define DBE_FP_VDRV_FP_VDRV_OFF_LSB 0 - -#define DBE_FP_HDRV_FP_HDRV_ON_MSB 23 -#define DBE_FP_HDRV_FP_HDRV_ON_LSB 12 -#define DBE_FP_HDRV_FP_HDRV_OFF_MSB 11 -#define DBE_FP_HDRV_FP_HDRV_OFF_LSB 0 - -#define DBE_FP_DE_FP_DE_ON_MSB 23 -#define DBE_FP_DE_FP_DE_ON_LSB 12 -#define DBE_FP_DE_FP_DE_OFF_MSB 11 -#define DBE_FP_DE_FP_DE_OFF_LSB 0 - -#define DBE_VT_VSYNC_VT_VSYNC_ON_MSB 23 -#define DBE_VT_VSYNC_VT_VSYNC_ON_LSB 12 -#define DBE_VT_VSYNC_VT_VSYNC_OFF_MSB 11 -#define DBE_VT_VSYNC_VT_VSYNC_OFF_LSB 0 - -#define DBE_VT_HSYNC_VT_HSYNC_ON_MSB 23 -#define DBE_VT_HSYNC_VT_HSYNC_ON_LSB 12 -#define DBE_VT_HSYNC_VT_HSYNC_OFF_MSB 11 -#define DBE_VT_HSYNC_VT_HSYNC_OFF_LSB 0 - -#define DBE_VT_VBLANK_VT_VBLANK_ON_MSB 23 -#define DBE_VT_VBLANK_VT_VBLANK_ON_LSB 12 -#define DBE_VT_VBLANK_VT_VBLANK_OFF_MSB 11 -#define DBE_VT_VBLANK_VT_VBLANK_OFF_LSB 0 - -#define DBE_VT_HBLANK_VT_HBLANK_ON_MSB 23 -#define DBE_VT_HBLANK_VT_HBLANK_ON_LSB 12 -#define DBE_VT_HBLANK_VT_HBLANK_OFF_MSB 11 -#define DBE_VT_HBLANK_VT_HBLANK_OFF_LSB 0 - -#define DBE_VT_FLAGS_VDRV_INVERT_MSB 0 -#define DBE_VT_FLAGS_VDRV_INVERT_LSB 0 -#define DBE_VT_FLAGS_HDRV_INVERT_MSB 2 -#define DBE_VT_FLAGS_HDRV_INVERT_LSB 2 - -#define DBE_VT_VCMAP_VT_VCMAP_ON_MSB 23 -#define DBE_VT_VCMAP_VT_VCMAP_ON_LSB 12 -#define DBE_VT_VCMAP_VT_VCMAP_OFF_MSB 11 -#define DBE_VT_VCMAP_VT_VCMAP_OFF_LSB 0 - -#define DBE_VT_HCMAP_VT_HCMAP_ON_MSB 23 -#define DBE_VT_HCMAP_VT_HCMAP_ON_LSB 12 -#define DBE_VT_HCMAP_VT_HCMAP_OFF_MSB 11 -#define DBE_VT_HCMAP_VT_HCMAP_OFF_LSB 0 - -#define DBE_VT_XYMAX_VT_MAXX_MSB 11 -#define DBE_VT_XYMAX_VT_MAXX_LSB 0 -#define DBE_VT_XYMAX_VT_MAXY_MSB 23 -#define DBE_VT_XYMAX_VT_MAXY_LSB 12 - -#define DBE_VT_HPIXEN_VT_HPIXEN_ON_MSB 23 -#define DBE_VT_HPIXEN_VT_HPIXEN_ON_LSB 12 -#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_MSB 11 -#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_LSB 0 - -#define DBE_VT_VPIXEN_VT_VPIXEN_ON_MSB 23 -#define DBE_VT_VPIXEN_VT_VPIXEN_ON_LSB 12 -#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_MSB 11 -#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_LSB 0 - -#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB 0 -#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB 0 - -#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB 0 -#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB 0 - -#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB 13 -#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB 13 - -#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB 0 -#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB 0 -#define DBE_FRM_CONTROL_FRM_TILE_PTR_MSB 31 -#define DBE_FRM_CONTROL_FRM_TILE_PTR_LSB 9 -#define DBE_FRM_CONTROL_FRM_LINEAR_MSB 1 -#define DBE_FRM_CONTROL_FRM_LINEAR_LSB 1 - -#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB 0 -#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB 0 - -#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB 12 -#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB 5 -#define DBE_FRM_SIZE_TILE_FRM_RHS_MSB 4 -#define DBE_FRM_SIZE_TILE_FRM_RHS_LSB 0 -#define DBE_FRM_SIZE_TILE_FRM_DEPTH_MSB 14 -#define DBE_FRM_SIZE_TILE_FRM_DEPTH_LSB 13 -#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB 15 -#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB 15 - -#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB 31 -#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB 16 - -#define DBE_DID_CONTROL_DID_DMA_ENABLE_MSB 0 -#define DBE_DID_CONTROL_DID_DMA_ENABLE_LSB 0 -#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB 0 -#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB 0 - -#define DBE_DID_START_XY_DID_STARTY_MSB 23 -#define DBE_DID_START_XY_DID_STARTY_LSB 12 -#define DBE_DID_START_XY_DID_STARTX_MSB 11 -#define DBE_DID_START_XY_DID_STARTX_LSB 0 - -#define DBE_CRS_START_XY_CRS_STARTY_MSB 23 -#define DBE_CRS_START_XY_CRS_STARTY_LSB 12 -#define DBE_CRS_START_XY_CRS_STARTX_MSB 11 -#define DBE_CRS_START_XY_CRS_STARTX_LSB 0 - -#define DBE_WID_TYP_MSB 4 -#define DBE_WID_TYP_LSB 2 -#define DBE_WID_BUF_MSB 1 -#define DBE_WID_BUF_LSB 0 - -#define DBE_VC_START_XY_VC_STARTY_MSB 23 -#define DBE_VC_START_XY_VC_STARTY_LSB 12 -#define DBE_VC_START_XY_VC_STARTX_MSB 11 -#define DBE_VC_START_XY_VC_STARTX_LSB 0 - -/* Constants */ - -#define DBE_FRM_DEPTH_8 0 -#define DBE_FRM_DEPTH_16 1 -#define DBE_FRM_DEPTH_32 2 - -#define DBE_CMODE_I8 0 -#define DBE_CMODE_I12 1 -#define DBE_CMODE_RG3B2 2 -#define DBE_CMODE_RGB4 3 -#define DBE_CMODE_ARGB5 4 -#define DBE_CMODE_RGB8 5 -#define DBE_CMODE_RGBA5 6 -#define DBE_CMODE_RGB10 7 - -#define DBE_BMODE_BOTH 3 - -#define DBE_CRS_MAGIC 54 - -#define DBE_CLOCK_REF_KHZ 27000 - -/* Config Register (DBE Only) Definitions */ - -#define DBE_CONFIG_VDAC_ENABLE 0x00000001 -#define DBE_CONFIG_VDAC_GSYNC 0x00000002 -#define DBE_CONFIG_VDAC_PBLANK 0x00000004 -#define DBE_CONFIG_FPENABLE 0x00000008 -#define DBE_CONFIG_LENDIAN 0x00000020 -#define DBE_CONFIG_TILEHIST 0x00000040 -#define DBE_CONFIG_EXT_ADDR 0x00000080 - -#define DBE_CONFIG_FBDEV ( DBE_CONFIG_VDAC_ENABLE | \ - DBE_CONFIG_VDAC_GSYNC | \ - DBE_CONFIG_VDAC_PBLANK | \ - DBE_CONFIG_LENDIAN | \ - DBE_CONFIG_EXT_ADDR ) - -/* - * Available Video Timings and Corresponding Indices - */ - -typedef enum { - DBE_VT_640_480_60, - - DBE_VT_800_600_60, - DBE_VT_800_600_75, - DBE_VT_800_600_120, - - DBE_VT_1024_768_50, - DBE_VT_1024_768_60, - DBE_VT_1024_768_75, - DBE_VT_1024_768_85, - DBE_VT_1024_768_120, - - DBE_VT_1280_1024_50, - DBE_VT_1280_1024_60, - DBE_VT_1280_1024_75, - DBE_VT_1280_1024_85, - - DBE_VT_1600_1024_53, - DBE_VT_1600_1024_60, - - DBE_VT_1600_1200_50, - DBE_VT_1600_1200_60, - DBE_VT_1600_1200_75, - - DBE_VT_1920_1080_50, - DBE_VT_1920_1080_60, - DBE_VT_1920_1080_72, - - DBE_VT_1920_1200_50, - DBE_VT_1920_1200_60, - DBE_VT_1920_1200_66, - - DBE_VT_UNKNOWN -} dbe_timing_t; - - - -/* - * Crime Video Timing Data Structure - */ - -struct dbe_timing_info -{ - dbe_timing_t type; - int flags; - short width; /* Monitor resolution */ - short height; - int fields_sec; /* fields/sec (Hz -3 dec. places */ - int cfreq; /* pixel clock frequency (MHz -3 dec. places) */ - short htotal; /* Horizontal total pixels */ - short hblank_start; /* Horizontal blank start */ - short hblank_end; /* Horizontal blank end */ - short hsync_start; /* Horizontal sync start */ - short hsync_end; /* Horizontal sync end */ - short vtotal; /* Vertical total lines */ - short vblank_start; /* Vertical blank start */ - short vblank_end; /* Vertical blank end */ - short vsync_start; /* Vertical sync start */ - short vsync_end; /* Vertical sync end */ - short pll_m; /* PLL M parameter */ - short pll_n; /* PLL P parameter */ - short pll_p; /* PLL N parameter */ -}; - -/* Defines for dbe_vof_info_t flags */ - -#define DBE_VOF_UNKNOWNMON 1 -#define DBE_VOF_STEREO 2 -#define DBE_VOF_DO_GENSYNC 4 /* enable incoming sync */ -#define DBE_VOF_SYNC_ON_GREEN 8 /* sync on green */ -#define DBE_VOF_FLATPANEL 0x1000 /* FLATPANEL Timing */ -#define DBE_VOF_MAGICKEY 0x2000 /* Backdoor key */ - -/* - * DBE Timing Tables - */ - -#ifdef INCLUDE_TIMING_TABLE_DATA -struct dbe_timing_info dbeVTimings[] = { - { - DBE_VT_640_480_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 640, 480, 59940, 25175, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 800, 640, 800, 656, 752, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 525, 480, 525, 490, 492, - /* pll_m, pll_n, pll_p */ - 15, 2, 3 - }, - - { - DBE_VT_800_600_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 800, 600, 60317, 40000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1056, 800, 1056, 840, 968, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 628, 600, 628, 601, 605, - /* pll_m, pll_n, pll_p */ - 3, 1, 1 - }, - - { - DBE_VT_800_600_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 800, 600, 75000, 49500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1056, 800, 1056, 816, 896, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 625, 600, 625, 601, 604, - /* pll_m, pll_n, pll_p */ - 11, 3, 1 - }, - - { - DBE_VT_800_600_120, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_STEREO, 800, 600, 119800, 82978, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1040, 800, 1040, 856, 976, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 666, 600, 666, 637, 643, - /* pll_m, pll_n, pll_p */ - 31, 5, 1 - }, - - { - DBE_VT_1024_768_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 50000, 54163, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1344, 1024, 1344, 1048, 1184, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 806, 768, 806, 771, 777, - /* pll_m, pll_n, pll_p */ - 4, 1, 1 - }, - - { - DBE_VT_1024_768_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 60004, 65000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1344, 1024, 1344, 1048, 1184, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 806, 768, 806, 771, 777, - /* pll_m, pll_n, pll_p */ - 12, 5, 0 - }, - - { - DBE_VT_1024_768_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 75029, 78750, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1312, 1024, 1312, 1040, 1136, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 800, 768, 800, 769, 772, - /* pll_m, pll_n, pll_p */ - 29, 5, 1 - }, - - { - DBE_VT_1024_768_85, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 84997, 94500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1376, 1024, 1376, 1072, 1168, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 808, 768, 808, 769, 772, - /* pll_m, pll_n, pll_p */ - 7, 2, 0 - }, - - { - DBE_VT_1024_768_120, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_STEREO, 1024, 768, 119800, 133195, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1376, 1024, 1376, 1072, 1168, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 808, 768, 808, 769, 772, - /* pll_m, pll_n, pll_p */ - 5, 1, 0 - }, - - { - DBE_VT_1280_1024_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 50000, 89460, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1680, 1280, 1680, 1360, 1480, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1065, 1024, 1065, 1027, 1030, - /* pll_m, pll_n, pll_p */ - 10, 3, 0 - }, - - { - DBE_VT_1280_1024_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 60020, 108000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1688, 1280, 1688, 1328, 1440, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1066, 1024, 1066, 1025, 1028, - /* pll_m, pll_n, pll_p */ - 4, 1, 0 - }, - - { - DBE_VT_1280_1024_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 75025, 135000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1688, 1280, 1688, 1296, 1440, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1066, 1024, 1066, 1025, 1028, - /* pll_m, pll_n, pll_p */ - 5, 1, 0 - }, - - { - DBE_VT_1280_1024_85, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 85024, 157500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1728, 1280, 1728, 1344, 1504, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1072, 1024, 1072, 1025, 1028, - /* pll_m, pll_n, pll_p */ - 29, 5, 0 - }, - - { - DBE_VT_1600_1024_53, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_FLATPANEL | DBE_VOF_MAGICKEY, - 1600, 1024, 53000, 107447, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1900, 1600, 1900, 1630, 1730, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1067, 1024, 1067, 1027, 1030, - /* pll_m, pll_n, pll_p */ - 4, 1, 0 - }, - - { - DBE_VT_1600_1024_60, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_FLATPANEL, 1600, 1024, 60000, 106913, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1670, 1600, 1670, 1630, 1650, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1067, 1024, 1067, 1027, 1030, - /* pll_m, pll_n, pll_p */ - 4, 1, 0 - }, - - { - DBE_VT_1600_1200_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1600, 1200, 50000, 130500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2088, 1600, 2088, 1644, 1764, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1205, 1211, - /* pll_m, pll_n, pll_p */ - 24, 5, 0 - }, - - { - DBE_VT_1600_1200_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1600, 1200, 59940, 162000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2160, 1600, 2160, 1644, 1856, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1201, 1204, - /* pll_m, pll_n, pll_p */ - 6, 1, 0 - }, - - { - DBE_VT_1600_1200_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 1600, 1200, 75000, 202500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2160, 1600, 2160, 1644, 1856, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1201, 1204, - /* pll_m, pll_n, pll_p */ - 15, 2, 0 - }, - - { - DBE_VT_1920_1080_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1080, 50000, 133200, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2368, 1920, 2368, 1952, 2096, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1125, 1080, 1125, 1083, 1086, - /* pll_m, pll_n, pll_p */ - 5, 1, 0 - }, - - { - DBE_VT_1920_1080_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1080, 59940, 159840, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2368, 1920, 2368, 1952, 2096, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1125, 1080, 1125, 1083, 1086, - /* pll_m, pll_n, pll_p */ - 6, 1, 0 - }, - - { - DBE_VT_1920_1080_72, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1080, 72000, 216023, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2560, 1920, 2560, 1968, 2184, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1172, 1080, 1172, 1083, 1086, - /* pll_m, pll_n, pll_p */ - 8, 1, 0 - }, - - { - DBE_VT_1920_1200_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1200, 50000, 161500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2584, 1920, 2584, 1984, 2240, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1203, 1206, - /* pll_m, pll_n, pll_p */ - 6, 1, 0 - }, - - { - DBE_VT_1920_1200_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1200, 59940, 193800, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2584, 1920, 2584, 1984, 2240, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1203, 1206, - /* pll_m, pll_n, pll_p */ - 29, 4, 0 - }, - - { - DBE_VT_1920_1200_66, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1200, 66000, 213180, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2584, 1920, 2584, 1984, 2240, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1203, 1206, - /* pll_m, pll_n, pll_p */ - 8, 1, 0 - } -}; - -#endif // INCLUDE_TIMING_TABLE_DATA - -#endif // ! __SGIVWFB_H__ diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 1a964025443..48568fdf847 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -13,15 +13,6 @@ config SOUND_BCM_CS4297A note that CONFIG_KGDB should not be enabled at the same time, since it also attempts to use this UART port. -config SOUND_VWSND - tristate "SGI Visual Workstation Sound" - depends on X86_VISWS - help - Say Y or M if you have an SGI Visual Workstation and you want to be - able to use its on-board audio. Read - <file:Documentation/sound/oss/vwsnd> for more info on this driver's - capabilities. - config SOUND_MSNDCLAS tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" depends on (m || !STANDALONE) && ISA diff --git a/sound/oss/Makefile b/sound/oss/Makefile index 77f21b68bf0..9bdbbde2173 100644 --- a/sound/oss/Makefile +++ b/sound/oss/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_SOUND_VIDC) += vidc_mod.o obj-$(CONFIG_SOUND_WAVEARTIST) += waveartist.o obj-$(CONFIG_SOUND_MSNDCLAS) += msnd.o msnd_classic.o obj-$(CONFIG_SOUND_MSNDPIN) += msnd.o msnd_pinnacle.o -obj-$(CONFIG_SOUND_VWSND) += vwsnd.o obj-$(CONFIG_SOUND_BCM_CS4297A) += swarm_cs4297a.o obj-$(CONFIG_DMASOUND) += dmasound/ diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c deleted file mode 100644 index a077e9c69a5..00000000000 --- a/sound/oss/vwsnd.c +++ /dev/null @@ -1,3506 +0,0 @@ -/* - * Sound driver for Silicon Graphics 320 and 540 Visual Workstations' - * onboard audio. See notes in Documentation/sound/oss/vwsnd . - * - * Copyright 1999 Silicon Graphics, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#undef VWSND_DEBUG /* define for debugging */ - -/* - * XXX to do - - * - * External sync. - * Rename swbuf, hwbuf, u&i, hwptr&swptr to something rational. - * Bug - if select() called before read(), pcm_setup() not called. - * Bug - output doesn't stop soon enough if process killed. - */ - -/* - * Things to test - - * - * Will readv/writev work? Write a test. - * - * insmod/rmmod 100 million times. - * - * Run I/O until int ptrs wrap around (roughly 6.2 hours @ DAT - * rate). - * - * Concurrent threads banging on mixer simultaneously, both UP - * and SMP kernels. Especially, watch for thread A changing - * OUTSRC while thread B changes gain -- both write to the same - * ad1843 register. - * - * What happens if a client opens /dev/audio then forks? - * Do two procs have /dev/audio open? Test. - * - * Pump audio through the CD, MIC and line inputs and verify that - * they mix/mute into the output. - * - * Apps: - * amp - * mpg123 - * x11amp - * mxv - * kmedia - * esound - * need more input apps - * - * Run tests while bombarding with signals. setitimer(2) will do it... */ - -/* - * This driver is organized in nine sections. - * The nine sections are: - * - * debug stuff - * low level lithium access - * high level lithium access - * AD1843 access - * PCM I/O - * audio driver - * mixer driver - * probe/attach/unload - * initialization and loadable kernel module interface - * - * That is roughly the order of increasing abstraction, so forward - * dependencies are minimal. - */ - -/* - * Locking Notes - * - * INC_USE_COUNT and DEC_USE_COUNT keep track of the number of - * open descriptors to this driver. They store it in vwsnd_use_count. - * The global device list, vwsnd_dev_list, is immutable when the IN_USE - * is true. - * - * devc->open_lock is a semaphore that is used to enforce the - * single reader/single writer rule for /dev/audio. The rule is - * that each device may have at most one reader and one writer. - * Open will block until the previous client has closed the - * device, unless O_NONBLOCK is specified. - * - * The semaphore devc->io_mutex serializes PCM I/O syscalls. This - * is unnecessary in Linux 2.2, because the kernel lock - * serializes read, write, and ioctl globally, but it's there, - * ready for the brave, new post-kernel-lock world. - * - * Locking between interrupt and baselevel is handled by the - * "lock" spinlock in vwsnd_port (one lock each for read and - * write). Each half holds the lock just long enough to see what - * area it owns and update its pointers. See pcm_output() and - * pcm_input() for most of the gory stuff. - * - * devc->mix_mutex serializes all mixer ioctls. This is also - * redundant because of the kernel lock. - * - * The lowest level lock is lith->lithium_lock. It is a - * spinlock which is held during the two-register tango of - * reading/writing an AD1843 register. See - * li_{read,write}_ad1843_reg(). - */ - -/* - * Sample Format Notes - * - * Lithium's DMA engine has two formats: 16-bit 2's complement - * and 8-bit unsigned . 16-bit transfers the data unmodified, 2 - * bytes per sample. 8-bit unsigned transfers 1 byte per sample - * and XORs each byte with 0x80. Lithium can input or output - * either mono or stereo in either format. - * - * The AD1843 has four formats: 16-bit 2's complement, 8-bit - * unsigned, 8-bit mu-Law and 8-bit A-Law. - * - * This driver supports five formats: AFMT_S8, AFMT_U8, - * AFMT_MU_LAW, AFMT_A_LAW, and AFMT_S16_LE. - * - * For AFMT_U8 output, we keep the AD1843 in 16-bit mode, and - * rely on Lithium's XOR to translate between U8 and S8. - * - * For AFMT_S8, AFMT_MU_LAW and AFMT_A_LAW output, we have to XOR - * the 0x80 bit in software to compensate for Lithium's XOR. - * This happens in pcm_copy_{in,out}(). - * - * Changes: - * 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> - * Added some __init/__exit - */ - -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/spinlock.h> -#include <linux/wait.h> -#include <linux/interrupt.h> -#include <linux/mutex.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <asm/visws/cobalt.h> - -#include "sound_config.h" - -static DEFINE_MUTEX(vwsnd_mutex); - -/*****************************************************************************/ -/* debug stuff */ - -#ifdef VWSND_DEBUG - -static int shut_up = 1; - -/* - * dbgassert - called when an assertion fails. - */ - -static void dbgassert(const char *fcn, int line, const char *expr) -{ - if (in_interrupt()) - panic("ASSERTION FAILED IN INTERRUPT, %s:%s:%d %s\n", - __FILE__, fcn, line, expr); - else { - int x; - printk(KERN_ERR "ASSERTION FAILED, %s:%s:%d %s\n", - __FILE__, fcn, line, expr); - x = * (volatile int *) 0; /* force proc to exit */ - } -} - -/* - * Bunch of useful debug macros: - * - * ASSERT - print unless e nonzero (panic if in interrupt) - * DBGDO - include arbitrary code if debugging - * DBGX - debug print raw (w/o function name) - * DBGP - debug print w/ function name - * DBGE - debug print function entry - * DBGC - debug print function call - * DBGR - debug print function return - * DBGXV - debug print raw when verbose - * DBGPV - debug print when verbose - * DBGEV - debug print function entry when verbose - * DBGRV - debug print function return when verbose - */ - -#define ASSERT(e) ((e) ? (void) 0 : dbgassert(__func__, __LINE__, #e)) -#define DBGDO(x) x -#define DBGX(fmt, args...) (in_interrupt() ? 0 : printk(KERN_ERR fmt, ##args)) -#define DBGP(fmt, args...) (DBGX("%s: " fmt, __func__ , ##args)) -#define DBGE(fmt, args...) (DBGX("%s" fmt, __func__ , ##args)) -#define DBGC(rtn) (DBGP("calling %s\n", rtn)) -#define DBGR() (DBGP("returning\n")) -#define DBGXV(fmt, args...) (shut_up ? 0 : DBGX(fmt, ##args)) -#define DBGPV(fmt, args...) (shut_up ? 0 : DBGP(fmt, ##args)) -#define DBGEV(fmt, args...) (shut_up ? 0 : DBGE(fmt, ##args)) -#define DBGCV(rtn) (shut_up ? 0 : DBGC(rtn)) -#define DBGRV() (shut_up ? 0 : DBGR()) - -#else /* !VWSND_DEBUG */ - -#define ASSERT(e) ((void) 0) -#define DBGDO(x) /* don't */ -#define DBGX(fmt, args...) ((void) 0) -#define DBGP(fmt, args...) ((void) 0) -#define DBGE(fmt, args...) ((void) 0) -#define DBGC(rtn) ((void) 0) -#define DBGR() ((void) 0) -#define DBGPV(fmt, args...) ((void) 0) -#define DBGXV(fmt, args...) ((void) 0) -#define DBGEV(fmt, args...) ((void) 0) -#define DBGCV(rtn) ((void) 0) -#define DBGRV() ((void) 0) - -#endif /* !VWSND_DEBUG */ - -/*****************************************************************************/ -/* low level lithium access */ - -/* - * We need to talk to Lithium registers on three pages. Here are - * the pages' offsets from the base address (0xFF001000). - */ - -enum { - LI_PAGE0_OFFSET = 0x01000 - 0x1000, /* FF001000 */ - LI_PAGE1_OFFSET = 0x0F000 - 0x1000, /* FF00F000 */ - LI_PAGE2_OFFSET = 0x10000 - 0x1000, /* FF010000 */ -}; - -/* low-level lithium data */ - -typedef struct lithium { - void * page0; /* virtual addresses */ - void * page1; - void * page2; - spinlock_t lock; /* protects codec and UST/MSC access */ -} lithium_t; - -/* - * li_destroy destroys the lithium_t structure and vm mappings. - */ - -static void li_destroy(lithium_t *lith) -{ - if (lith->page0) { - iounmap(lith->page0); - lith->page0 = NULL; - } - if (lith->page1) { - iounmap(lith->page1); - lith->page1 = NULL; - } - if (lith->page2) { - iounmap(lith->page2); - lith->page2 = NULL; - } -} - -/* - * li_create initializes the lithium_t structure and sets up vm mappings - * to access the registers. - * Returns 0 on success, -errno on failure. - */ - -static int __init li_create(lithium_t *lith, unsigned long baseaddr) -{ - spin_lock_init(&lith->lock); - lith->page0 = ioremap_nocache(baseaddr + LI_PAGE0_OFFSET, PAGE_SIZE); - lith->page1 = ioremap_nocache(baseaddr + LI_PAGE1_OFFSET, PAGE_SIZE); - lith->page2 = ioremap_nocache(baseaddr + LI_PAGE2_OFFSET, PAGE_SIZE); - if (!lith->page0 || !lith->page1 || !lith->page2) { - li_destroy(lith); - return -ENOMEM; - } - return 0; -} - -/* - * basic register accessors - read/write long/byte - */ - -static __inline__ unsigned long li_readl(lithium_t *lith, int off) -{ - return * (volatile unsigned long *) (lith->page0 + off); -} - -static __inline__ unsigned char li_readb(lithium_t *lith, int off) -{ - return * (volatile unsigned char *) (lith->page0 + off); -} - -static __inline__ void li_writel(lithium_t *lith, int off, unsigned long val) -{ - * (volatile unsigned long *) (lith->page0 + off) = val; -} - -static __inline__ void li_writeb(lithium_t *lith, int off, unsigned char val) -{ - * (volatile unsigned char *) (lith->page0 + off) = val; -} - -/*****************************************************************************/ -/* High Level Lithium Access */ - -/* - * Lithium DMA Notes - * - * Lithium has two dedicated DMA channels for audio. They are known - * as comm1 and comm2 (communication areas 1 and 2). Comm1 is for - * input, and comm2 is for output. Each is controlled by three - * registers: BASE (base address), CFG (config) and CCTL - * (config/control). - * - * Each DMA channel points to a physically contiguous ring buffer in - * main memory of up to 8 Kbytes. (This driver always uses 8 Kb.) - * There are three pointers into the ring buffer: read, write, and - * trigger. The pointers are 8 bits each. Each pointer points to - * 32-byte "chunks" of data. The DMA engine moves 32 bytes at a time, - * so there is no finer-granularity control. - * - * In comm1, the hardware updates the write ptr, and software updates - * the read ptr. In comm2, it's the opposite: hardware updates the - * read ptr, and software updates the write ptr. I designate the - * hardware-updated ptr as the hwptr, and the software-updated ptr as - * the swptr. - * - * The trigger ptr and trigger mask are used to trigger interrupts. - * From the Lithium spec, section 5.6.8, revision of 12/15/1998: - * - * Trigger Mask Value - * - * A three bit wide field that represents a power of two mask - * that is used whenever the trigger pointer is compared to its - * respective read or write pointer. A value of zero here - * implies a mask of 0xFF and a value of seven implies a mask - * 0x01. This value can be used to sub-divide the ring buffer - * into pie sections so that interrupts monitor the progress of - * hardware from section to section. - * - * My interpretation of that is, whenever the hw ptr is updated, it is - * compared with the trigger ptr, and the result is masked by the - * trigger mask. (Actually, by the complement of the trigger mask.) - * If the result is zero, an interrupt is triggered. I.e., interrupt - * if ((hwptr & ~mask) == (trptr & ~mask)). The mask is formed from - * the trigger register value as mask = (1 << (8 - tmreg)) - 1. - * - * In yet different words, setting tmreg to 0 causes an interrupt after - * every 256 DMA chunks (8192 bytes) or once per traversal of the - * ring buffer. Setting it to 7 caues an interrupt every 2 DMA chunks - * (64 bytes) or 128 times per traversal of the ring buffer. - */ - -/* Lithium register offsets and bit definitions */ - -#define LI_HOST_CONTROLLER 0x000 -# define LI_HC_RESET 0x00008000 -# define LI_HC_LINK_ENABLE 0x00004000 -# define LI_HC_LINK_FAILURE 0x00000004 -# define LI_HC_LINK_CODEC 0x00000002 -# define LI_HC_LINK_READY 0x00000001 - -#define LI_INTR_STATUS 0x010 -#define LI_INTR_MASK 0x014 -# define LI_INTR_LINK_ERR 0x00008000 -# define LI_INTR_COMM2_TRIG 0x00000008 -# define LI_INTR_COMM2_UNDERFLOW 0x00000004 -# define LI_INTR_COMM1_TRIG 0x00000002 -# define LI_INTR_COMM1_OVERFLOW 0x00000001 - -#define LI_CODEC_COMMAND 0x018 -# define LI_CC_BUSY 0x00008000 -# define LI_CC_DIR 0x00000080 -# define LI_CC_DIR_RD LI_CC_DIR -# define LI_CC_DIR_WR (!LI_CC_DIR) -# define LI_CC_ADDR_MASK 0x0000007F - -#define LI_CODEC_DATA 0x01C - -#define LI_COMM1_BASE 0x100 -#define LI_COMM1_CTL 0x104 -# define LI_CCTL_RESET 0x80000000 -# define LI_CCTL_SIZE 0x70000000 -# define LI_CCTL_DMA_ENABLE 0x08000000 -# define LI_CCTL_TMASK 0x07000000 /* trigger mask */ -# define LI_CCTL_TPTR 0x00FF0000 /* trigger pointer */ -# define LI_CCTL_RPTR 0x0000FF00 -# define LI_CCTL_WPTR 0x000000FF -#define LI_COMM1_CFG 0x108 -# define LI_CCFG_LOCK 0x00008000 -# define LI_CCFG_SLOT 0x00000070 -# define LI_CCFG_DIRECTION 0x00000008 -# define LI_CCFG_DIR_IN (!LI_CCFG_DIRECTION) -# define LI_CCFG_DIR_OUT LI_CCFG_DIRECTION -# define LI_CCFG_MODE 0x00000004 -# define LI_CCFG_MODE_MONO (!LI_CCFG_MODE) -# define LI_CCFG_MODE_STEREO LI_CCFG_MODE -# define LI_CCFG_FORMAT 0x00000003 -# define LI_CCFG_FMT_8BIT 0x00000000 -# define LI_CCFG_FMT_16BIT 0x00000001 -#define LI_COMM2_BASE 0x10C -#define LI_COMM2_CTL 0x110 - /* bit definitions are the same as LI_COMM1_CTL */ -#define LI_COMM2_CFG 0x114 - /* bit definitions are the same as LI_COMM1_CFG */ - -#define LI_UST_LOW 0x200 /* 64-bit Unadjusted System Time is */ -#define LI_UST_HIGH 0x204 /* microseconds since boot */ - -#define LI_AUDIO1_UST 0x300 /* UST-MSC pairs */ -#define LI_AUDIO1_MSC 0x304 /* MSC (Media Stream Counter) */ -#define LI_AUDIO2_UST 0x308 /* counts samples actually */ -#define LI_AUDIO2_MSC 0x30C /* processed as of time UST */ - -/* - * Lithium's DMA engine operates on chunks of 32 bytes. We call that - * a DMACHUNK. - */ - -#define DMACHUNK_SHIFT 5 -#define DMACHUNK_SIZE (1 << DMACHUNK_SHIFT) -#define BYTES_TO_CHUNKS(bytes) ((bytes) >> DMACHUNK_SHIFT) -#define CHUNKS_TO_BYTES(chunks) ((chunks) << DMACHUNK_SHIFT) - -/* - * Two convenient macros to shift bitfields into/out of position. - * - * Observe that (mask & -mask) is (1 << low_set_bit_of(mask)). - * As long as mask is constant, we trust the compiler will change the - * multiply and divide into shifts. - */ - -#define SHIFT_FIELD(val, mask) (((val) * ((mask) & -(mask))) & (mask)) -#define UNSHIFT_FIELD(val, mask) (((val) & (mask)) / ((mask) & -(mask))) - -/* - * dma_chan_desc is invariant information about a Lithium - * DMA channel. There are two instances, li_comm1 and li_comm2. - * - * Note that the CCTL register fields are write ptr and read ptr, but what - * we care about are which pointer is updated by software and which by - * hardware. - */ - -typedef struct dma_chan_desc { - int basereg; - int cfgreg; - int ctlreg; - int hwptrreg; - int swptrreg; - int ustreg; - int mscreg; - unsigned long swptrmask; - int ad1843_slot; - int direction; /* LI_CCTL_DIR_IN/OUT */ -} dma_chan_desc_t; - -static const dma_chan_desc_t li_comm1 = { - LI_COMM1_BASE, /* base register offset */ - LI_COMM1_CFG, /* config register offset */ - LI_COMM1_CTL, /* control register offset */ - LI_COMM1_CTL + 0, /* hw ptr reg offset (write ptr) */ - LI_COMM1_CTL + 1, /* sw ptr reg offset (read ptr) */ - LI_AUDIO1_UST, /* ust reg offset */ - LI_AUDIO1_MSC, /* msc reg offset */ - LI_CCTL_RPTR, /* sw ptr bitmask in ctlval */ - 2, /* ad1843 serial slot */ - LI_CCFG_DIR_IN /* direction */ -}; - -static const dma_chan_desc_t li_comm2 = { - LI_COMM2_BASE, /* base register offset */ - LI_COMM2_CFG, /* config register offset */ - LI_COMM2_CTL, /* control register offset */ - LI_COMM2_CTL + 1, /* hw ptr reg offset (read ptr) */ - LI_COMM2_CTL + 0, /* sw ptr reg offset (writr ptr) */ - LI_AUDIO2_UST, /* ust reg offset */ - LI_AUDIO2_MSC, /* msc reg offset */ - LI_CCTL_WPTR, /* sw ptr bitmask in ctlval */ - 2, /* ad1843 serial slot */ - LI_CCFG_DIR_OUT /* direction */ -}; - -/* - * dma_chan is variable information about a Lithium DMA channel. - * - * The desc field points to invariant information. - * The lith field points to a lithium_t which is passed - * to li_read* and li_write* to access the registers. - * The *val fields shadow the lithium registers' contents. - */ - -typedef struct dma_chan { - const dma_chan_desc_t *desc; - lithium_t *lith; - unsigned long baseval; - unsigned long cfgval; - unsigned long ctlval; -} dma_chan_t; - -/* - * ustmsc is a UST/MSC pair (Unadjusted System Time/Media Stream Counter). - * UST is time in microseconds since the system booted, and MSC is a - * counter that increments with every audio sample. - */ - -typedef struct ustmsc { - unsigned long long ust; - unsigned long msc; -} ustmsc_t; - -/* - * li_ad1843_wait waits until lithium says the AD1843 register - * exchange is not busy. Returns 0 on success, -EBUSY on timeout. - * - * Locking: must be called with lithium_lock held. - */ - -static int li_ad1843_wait(lithium_t *lith) -{ - unsigned long later = jiffies + 2; - while (li_readl(lith, LI_CODEC_COMMAND) & LI_CC_BUSY) - if (time_after_eq(jiffies, later)) - return -EBUSY; - return 0; -} - -/* - * li_read_ad1843_reg returns the current contents of a 16 bit AD1843 register. - * - * Returns unsigned register value on success, -errno on failure. - */ - -static int li_read_ad1843_reg(lithium_t *lith, int reg) -{ - int val; - - ASSERT(!in_interrupt()); - spin_lock(&lith->lock); - { - val = li_ad1843_wait(lith); - if (val == 0) { - li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_RD | reg); - val = li_ad1843_wait(lith); - } - if (val == 0) - val = li_readl(lith, LI_CODEC_DATA); - } - spin_unlock(&lith->lock); - - DBGXV("li_read_ad1843_reg(lith=0x%p, reg=%d) returns 0x%04x\n", - lith, reg, val); - - return val; -} - -/* - * li_write_ad1843_reg writes the specified value to a 16 bit AD1843 register. - */ - -static void li_write_ad1843_reg(lithium_t *lith, int reg, int newval) -{ - spin_lock(&lith->lock); - { - if (li_ad1843_wait(lith) == 0) { - li_writel(lith, LI_CODEC_DATA, newval); - li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_WR | reg); - } - } - spin_unlock(&lith->lock); -} - -/* - * li_setup_dma calculates all the register settings for DMA in a particular - * mode. It takes too many arguments. - */ - -static void li_setup_dma(dma_chan_t *chan, - const dma_chan_desc_t *desc, - lithium_t *lith, - unsigned long buffer_paddr, - int bufshift, - int fragshift, - int channels, - int sampsize) -{ - unsigned long mode, format; - unsigned long size, tmask; - - DBGEV("(chan=0x%p, desc=0x%p, lith=0x%p, buffer_paddr=0x%lx, " - "bufshift=%d, fragshift=%d, channels=%d, sampsize=%d)\n", - chan, desc, lith, buffer_paddr, - bufshift, fragshift, channels, sampsize); - - /* Reset the channel first. */ - - li_writel(lith, desc->ctlreg, LI_CCTL_RESET); - - ASSERT(channels == 1 || channels == 2); - if (channels == 2) - mode = LI_CCFG_MODE_STEREO; - else - mode = LI_CCFG_MODE_MONO; - ASSERT(sampsize == 1 || sampsize == 2); - if (sampsize == 2) - format = LI_CCFG_FMT_16BIT; - else - format = LI_CCFG_FMT_8BIT; - chan->desc = desc; - chan->lith = lith; - - /* - * Lithium DMA address register takes a 40-bit physical - * address, right-shifted by 8 so it fits in 32 bits. Bit 37 - * must be set -- it enables cache coherence. - */ - - ASSERT(!(buffer_paddr & 0xFF)); - chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8); - - chan->cfgval = ((chan->cfgval & ~LI_CCFG_LOCK) | - SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) | - desc->direction | - mode | - format); - - size = bufshift - 6; - tmask = 13 - fragshift; /* See Lithium DMA Notes above. */ - ASSERT(size >= 2 && size <= 7); - ASSERT(tmask >= 1 && tmask <= 7); - chan->ctlval = ((chan->ctlval & ~LI_CCTL_RESET) | - SHIFT_FIELD(size, LI_CCTL_SIZE) | - (chan->ctlval & ~LI_CCTL_DMA_ENABLE) | - SHIFT_FIELD(tmask, LI_CCTL_TMASK) | - SHIFT_FIELD(0, LI_CCTL_TPTR)); - - DBGPV("basereg 0x%x = 0x%lx\n", desc->basereg, chan->baseval); - DBGPV("cfgreg 0x%x = 0x%lx\n", desc->cfgreg, chan->cfgval); - DBGPV("ctlreg 0x%x = 0x%lx\n", desc->ctlreg, chan->ctlval); - - li_writel(lith, desc->basereg, chan->baseval); - li_writel(lith, desc->cfgreg, chan->cfgval); - li_writel(lith, desc->ctlreg, chan->ctlval); - - DBGRV(); -} - -static void li_shutdown_dma(dma_chan_t *chan) -{ - lithium_t *lith = chan->lith; - void * lith1 = lith->page1; - - DBGEV("(chan=0x%p)\n", chan); - - chan->ctlval &= ~LI_CCTL_DMA_ENABLE; - DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval); - li_writel(lith, chan->desc->ctlreg, chan->ctlval); - - /* - * Offset 0x500 on Lithium page 1 is an undocumented, - * unsupported register that holds the zero sample value. - * Lithium is supposed to output zero samples when DMA is - * inactive, and repeat the last sample when DMA underflows. - * But it has a bug, where, after underflow occurs, the zero - * sample is not reset. - * - * I expect this to break in a future rev of Lithium. - */ - - if (lith1 && chan->desc->direction == LI_CCFG_DIR_OUT) - * (volatile unsigned long *) (lith1 + 0x500) = 0; -} - -/* - * li_activate_dma always starts dma at the beginning of the buffer. - * - * N.B., these may be called from interrupt. - */ - -static __inline__ void li_activate_dma(dma_chan_t *chan) -{ - chan->ctlval |= LI_CCTL_DMA_ENABLE; - DBGPV("ctlval = 0x%lx\n", chan->ctlval); - li_writel(chan->lith, chan->desc->ctlreg, chan->ctlval); -} - -static void li_deactivate_dma(dma_chan_t *chan) -{ - lithium_t *lith = chan->lith; - void * lith2 = lith->page2; - - chan->ctlval &= ~(LI_CCTL_DMA_ENABLE | LI_CCTL_RPTR | LI_CCTL_WPTR); - DBGPV("ctlval = 0x%lx\n", chan->ctlval); - DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval); - li_writel(lith, chan->desc->ctlreg, chan->ctlval); - - /* - * Offsets 0x98 and 0x9C on Lithium page 2 are undocumented, - * unsupported registers that are internal copies of the DMA - * read and write pointers. Because of a Lithium bug, these - * registers aren't zeroed correctly when DMA is shut off. So - * we whack them directly. - * - * I expect this to break in a future rev of Lithium. - */ - - if (lith2 && chan->desc->direction == LI_CCFG_DIR_OUT) { - * (volatile unsigned long *) (lith2 + 0x98) = 0; - * (volatile unsigned long *) (lith2 + 0x9C) = 0; - } -} - -/* - * read/write the ring buffer pointers. These routines' arguments and results - * are byte offsets from the beginning of the ring buffer. - */ - -static __inline__ int li_read_swptr(dma_chan_t *chan) -{ - const unsigned long mask = chan->desc->swptrmask; - - return CHUNKS_TO_BYTES(UNSHIFT_FIELD(chan->ctlval, mask)); -} - -static __inline__ int li_read_hwptr(dma_chan_t *chan) -{ - return CHUNKS_TO_BYTES(li_readb(chan->lith, chan->desc->hwptrreg)); -} - -static __inline__ void li_write_swptr(dma_chan_t *chan, int val) -{ - const unsigned long mask = chan->desc->swptrmask; - - ASSERT(!(val & ~CHUNKS_TO_BYTES(0xFF))); - val = BYTES_TO_CHUNKS(val); - chan->ctlval = (chan->ctlval & ~mask) | SHIFT_FIELD(val, mask); - li_writeb(chan->lith, chan->desc->swptrreg, val); -} - -/* li_read_USTMSC() returns a UST/MSC pair for the given channel. */ - -static void li_read_USTMSC(dma_chan_t *chan, ustmsc_t *ustmsc) -{ - lithium_t *lith = chan->lith; - const dma_chan_desc_t *desc = chan->desc; - unsigned long now_low, now_high0, now_high1, chan_ust; - - spin_lock(&lith->lock); - { - /* - * retry until we do all five reads without the - * high word changing. (High word increments - * every 2^32 microseconds, i.e., not often) - */ - do { - now_high0 = li_readl(lith, LI_UST_HIGH); - now_low = li_readl(lith, LI_UST_LOW); - - /* - * Lithium guarantees these two reads will be - * atomic -- ust will not increment after msc - * is read. - */ - - ustmsc->msc = li_readl(lith, desc->mscreg); - chan_ust = li_readl(lith, desc->ustreg); - - now_high1 = li_readl(lith, LI_UST_HIGH); - } while (now_high0 != now_high1); - } - spin_unlock(&lith->lock); - ustmsc->ust = ((unsigned long long) now_high0 << 32 | chan_ust); -} - -static void li_enable_interrupts(lithium_t *lith, unsigned int mask) -{ - DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask); - - /* clear any already-pending interrupts. */ - - li_writel(lith, LI_INTR_STATUS, mask); - - /* enable the interrupts. */ - - mask |= li_readl(lith, LI_INTR_MASK); - li_writel(lith, LI_INTR_MASK, mask); -} - -static void li_disable_interrupts(lithium_t *lith, unsigned int mask) -{ - unsigned int keepmask; - - DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask); - - /* disable the interrupts */ - - keepmask = li_readl(lith, LI_INTR_MASK) & ~mask; - li_writel(lith, LI_INTR_MASK, keepmask); - - /* clear any pending interrupts. */ - - li_writel(lith, LI_INTR_STATUS, mask); -} - -/* Get the interrupt status and clear all pending interrupts. */ - -static unsigned int li_get_clear_intr_status(lithium_t *lith) -{ - unsigned int status; - - status = li_readl(lith, LI_INTR_STATUS); - li_writel(lith, LI_INTR_STATUS, ~0); - return status & li_readl(lith, LI_INTR_MASK); -} - -static int li_init(lithium_t *lith) -{ - /* 1. System power supplies stabilize. */ - - /* 2. Assert the ~RESET signal. */ - - li_writel(lith, LI_HOST_CONTROLLER, LI_HC_RESET); - udelay(1); - - /* 3. Deassert the ~RESET signal and enter a wait period to allow - the AD1843 internal clocks and the external crystal oscillator - to stabilize. */ - - li_writel(lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE); - udelay(1); - - return 0; -} - -/*****************************************************************************/ -/* AD1843 access */ - -/* - * AD1843 bitfield definitions. All are named as in the AD1843 data - * sheet, with ad1843_ prepended and individual bit numbers removed. - * - * E.g., bits LSS0 through LSS2 become ad1843_LSS. - * - * Only the bitfields we need are defined. - */ - -typedef struct ad1843_bitfield { - char reg; - char lo_bit; - char nbits; -} ad1843_bitfield_t; - -static const ad1843_bitfield_t - ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */ - ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */ - ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */ - ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */ - ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */ - ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */ - ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */ - ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */ - ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */ - ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */ - ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */ - ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */ - ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */ - ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */ - ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */ - ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */ - ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */ - ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */ - ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */ - ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */ - ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */ - ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */ - ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */ - ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */ - ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */ - ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */ - ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */ - ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */ - ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */ - ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */ - ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */ - ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */ - ad1843_C2C = { 20, 0, 16 }, /* Clock 1 Sample Rate Select */ - ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */ - ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */ - ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */ - ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */ - ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */ - ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */ - ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */ - ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */ - ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */ - ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */ - ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */ - ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */ - ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */ - ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */ - ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */ - ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */ - ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */ - ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */ - -/* - * The various registers of the AD1843 use three different formats for - * specifying gain. The ad1843_gain structure parameterizes the - * formats. - */ - -typedef struct ad1843_gain { - - int negative; /* nonzero if gain is negative. */ - const ad1843_bitfield_t *lfield; - const ad1843_bitfield_t *rfield; - -} ad1843_gain_t; - -static const ad1843_gain_t ad1843_gain_RECLEV - = { 0, &ad1843_LIG, &ad1843_RIG }; -static const ad1843_gain_t ad1843_gain_LINE - = { 1, &ad1843_LX1M, &ad1843_RX1M }; -static const ad1843_gain_t ad1843_gain_CD - = { 1, &ad1843_LX2M, &ad1843_RX2M }; -static const ad1843_gain_t ad1843_gain_MIC - = { 1, &ad1843_LMCM, &ad1843_RMCM }; -static const ad1843_gain_t ad1843_gain_PCM - = { 1, &ad1843_LDA1G, &ad1843_RDA1G }; - -/* read the current value of an AD1843 bitfield. */ - -static int ad1843_read_bits(lithium_t *lith, const ad1843_bitfield_t *field) -{ - int w = li_read_ad1843_reg(lith, field->reg); - int val = w >> field->lo_bit & ((1 << field->nbits) - 1); - - DBGXV("ad1843_read_bits(lith=0x%p, field->{%d %d %d}) returns 0x%x\n", - lith, field->reg, field->lo_bit, field->nbits, val); - - return val; -} - -/* - * write a new value to an AD1843 bitfield and return the old value. - */ - -static int ad1843_write_bits(lithium_t *lith, - const ad1843_bitfield_t *field, - int newval) -{ - int w = li_read_ad1843_reg(lith, field->reg); - int mask = ((1 << field->nbits) - 1) << field->lo_bit; - int oldval = (w & mask) >> field->lo_bit; - int newbits = (newval << field->lo_bit) & mask; - w = (w & ~mask) | newbits; - (void) li_write_ad1843_reg(lith, field->reg, w); - - DBGXV("ad1843_write_bits(lith=0x%p, field->{%d %d %d}, val=0x%x) " - "returns 0x%x\n", - lith, field->reg, field->lo_bit, field->nbits, newval, - oldval); - - return oldval; -} - -/* - * ad1843_read_multi reads multiple bitfields from the same AD1843 - * register. It uses a single read cycle to do it. (Reading the - * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20 - * microseconds.) - * - * Called ike this. - * - * ad1843_read_multi(lith, nfields, - * &ad1843_FIELD1, &val1, - * &ad1843_FIELD2, &val2, ...); - */ - -static void ad1843_read_multi(lithium_t *lith, int argcount, ...) -{ - va_list ap; - const ad1843_bitfield_t *fp; - int w = 0, mask, *value, reg = -1; - - va_start(ap, argcount); - while (--argcount >= 0) { - fp = va_arg(ap, const ad1843_bitfield_t *); - value = va_arg(ap, int *); - if (reg == -1) { - reg = fp->reg; - w = li_read_ad1843_reg(lith, reg); - } - ASSERT(reg == fp->reg); - mask = (1 << fp->nbits) - 1; - *value = w >> fp->lo_bit & mask; - } - va_end(ap); -} - -/* - * ad1843_write_multi stores multiple bitfields into the same AD1843 - * register. It uses one read and one write cycle to do it. - * - * Called like this. - * - * ad1843_write_multi(lith, nfields, - * &ad1843_FIELD1, val1, - * &ad1843_FIELF2, val2, ...); - */ - -static void ad1843_write_multi(lithium_t *lith, int argcount, ...) -{ - va_list ap; - int reg; - const ad1843_bitfield_t *fp; - int value; - int w, m, mask, bits; - - mask = 0; - bits = 0; - reg = -1; - - va_start(ap, argcount); - while (--argcount >= 0) { - fp = va_arg(ap, const ad1843_bitfield_t *); - value = va_arg(ap, int); - if (reg == -1) - reg = fp->reg; - ASSERT(fp->reg == reg); - m = ((1 << fp->nbits) - 1) << fp->lo_bit; - mask |= m; - bits |= (value << fp->lo_bit) & m; - } - va_end(ap); - ASSERT(!(bits & ~mask)); - if (~mask & 0xFFFF) - w = li_read_ad1843_reg(lith, reg); - else - w = 0; - w = (w & ~mask) | bits; - (void) li_write_ad1843_reg(lith, reg, w); -} - -/* - * ad1843_get_gain reads the specified register and extracts the gain value - * using the supplied gain type. It returns the gain in OSS format. - */ - -static int ad1843_get_gain(lithium_t *lith, const ad1843_gain_t *gp) -{ - int lg, rg; - unsigned short mask = (1 << gp->lfield->nbits) - 1; - - ad1843_read_multi(lith, 2, gp->lfield, &lg, gp->rfield, &rg); - if (gp->negative) { - lg = mask - lg; - rg = mask - rg; - } - lg = (lg * 100 + (mask >> 1)) / mask; - rg = (rg * 100 + (mask >> 1)) / mask; - return lg << 0 | rg << 8; -} - -/* - * Set an audio channel's gain. Converts from OSS format to AD1843's - * format. - * - * Returns the new gain, which may be lower than the old gain. - */ - -static int ad1843_set_gain(lithium_t *lith, - const ad1843_gain_t *gp, - int newval) -{ - unsigned short mask = (1 << gp->lfield->nbits) - 1; - - int lg = newval >> 0 & 0xFF; - int rg = newval >> 8; - if (lg < 0 || lg > 100 || rg < 0 || rg > 100) - return -EINVAL; - lg = (lg * mask + (mask >> 1)) / 100; - rg = (rg * mask + (mask >> 1)) / 100; - if (gp->negative) { - lg = mask - lg; - rg = mask - rg; - } - ad1843_write_multi(lith, 2, gp->lfield, lg, gp->rfield, rg); - return ad1843_get_gain(lith, gp); -} - -/* Returns the current recording source, in OSS format. */ - -static int ad1843_get_recsrc(lithium_t *lith) -{ - int ls = ad1843_read_bits(lith, &ad1843_LSS); - - switch (ls) { - case 1: - return SOUND_MASK_MIC; - case 2: - return SOUND_MASK_LINE; - case 3: - return SOUND_MASK_CD; - case 6: - return SOUND_MASK_PCM; - default: - ASSERT(0); - return -1; - } -} - -/* - * Enable/disable digital resample mode in the AD1843. - * - * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down - * while switching modes. So we save DA1's state (DA2's state is not - * interesting), power them down, switch into/out of resample mode, - * power them up, and restore state. - * - * This will cause audible glitches if D/A or A/D is going on, so the - * driver disallows that (in mixer_write_ioctl()). - * - * The open question is, is this worth doing? I'm leaving it in, - * because it's written, but... - */ - -static void ad1843_set_resample_mode(lithium_t *lith, int onoff) -{ - /* Save DA1 mute and gain (addr 9 is DA1 analog gain/attenuation) */ - int save_da1 = li_read_ad1843_reg(lith, 9); - - /* Power down A/D and D/A. */ - ad1843_write_multi(lith, 4, - &ad1843_DA1EN, 0, - &ad1843_DA2EN, 0, - &ad1843_ADLEN, 0, - &ad1843_ADREN, 0); - - /* Switch mode */ - ASSERT(onoff == 0 || onoff == 1); - ad1843_write_bits(lith, &ad1843_DRSFLT, onoff); - - /* Power up A/D and D/A. */ - ad1843_write_multi(lith, 3, - &ad1843_DA1EN, 1, - &ad1843_ADLEN, 1, - &ad1843_ADREN, 1); - - /* Restore DA1 mute and gain. */ - li_write_ad1843_reg(lith, 9, save_da1); -} - -/* - * Set recording source. Arg newsrc specifies an OSS channel mask. - * - * The complication is that when we switch into/out of loopback mode - * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of - * digital resampling mode. - * - * Returns newsrc on success, -errno on failure. - */ - -static int ad1843_set_recsrc(lithium_t *lith, int newsrc) -{ - int bits; - int oldbits; - - switch (newsrc) { - case SOUND_MASK_PCM: - bits = 6; - break; - - case SOUND_MASK_MIC: - bits = 1; - break; - - case SOUND_MASK_LINE: - bits = 2; - break; - - case SOUND_MASK_CD: - bits = 3; - break; - - default: - return -EINVAL; - } - oldbits = ad1843_read_bits(lith, &ad1843_LSS); - if (newsrc == SOUND_MASK_PCM && oldbits != 6) { - DBGP("enabling digital resample mode\n"); - ad1843_set_resample_mode(lith, 1); - ad1843_write_multi(lith, 2, - &ad1843_DAADL, 2, - &ad1843_DAADR, 2); - } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) { - DBGP("disabling digital resample mode\n"); - ad1843_set_resample_mode(lith, 0); - ad1843_write_multi(lith, 2, - &ad1843_DAADL, 0, - &ad1843_DAADR, 0); - } - ad1843_write_multi(lith, 2, &ad1843_LSS, bits, &ad1843_RSS, bits); - return newsrc; -} - -/* - * Return current output sources, in OSS format. - */ - -static int ad1843_get_outsrc(lithium_t *lith) -{ - int pcm, line, mic, cd; - - pcm = ad1843_read_bits(lith, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM; - line = ad1843_read_bits(lith, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE; - cd = ad1843_read_bits(lith, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD; - mic = ad1843_read_bits(lith, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC; - - return pcm | line | cd | mic; -} - -/* - * Set output sources. Arg is a mask of active sources in OSS format. - * - * Returns source mask on success, -errno on failure. - */ - -static int ad1843_set_outsrc(lithium_t *lith, int mask) -{ - int pcm, line, mic, cd; - - if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_CD | SOUND_MASK_MIC)) - return -EINVAL; - pcm = (mask & SOUND_MASK_PCM) ? 0 : 1; - line = (mask & SOUND_MASK_LINE) ? 0 : 1; - mic = (mask & SOUND_MASK_MIC) ? 0 : 1; - cd = (mask & SOUND_MASK_CD) ? 0 : 1; - - ad1843_write_multi(lith, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm); - ad1843_write_multi(lith, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line); - ad1843_write_multi(lith, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd); - ad1843_write_multi(lith, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic); - - return mask; -} - -/* Setup ad1843 for D/A conversion. */ - -static void ad1843_setup_dac(lithium_t *lith, - int framerate, - int fmt, - int channels) -{ - int ad_fmt = 0, ad_mode = 0; - - DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n", - lith, framerate, fmt, channels); - - switch (fmt) { - case AFMT_S8: ad_fmt = 1; break; - case AFMT_U8: ad_fmt = 1; break; - case AFMT_S16_LE: ad_fmt = 1; break; - case AFMT_MU_LAW: ad_fmt = 2; break; - case AFMT_A_LAW: ad_fmt = 3; break; - default: ASSERT(0); - } - - switch (channels) { - case 2: ad_mode = 0; break; - case 1: ad_mode = 1; break; - default: ASSERT(0); - } - - DBGPV("ad_mode = %d, ad_fmt = %d\n", ad_mode, ad_fmt); - ASSERT(framerate >= 4000 && framerate <= 49000); - ad1843_write_bits(lith, &ad1843_C1C, framerate); - ad1843_write_multi(lith, 2, - &ad1843_DA1SM, ad_mode, &ad1843_DA1F, ad_fmt); -} - -static void ad1843_shutdown_dac(lithium_t *lith) -{ - ad1843_write_bits(lith, &ad1843_DA1F, 1); -} - -static void ad1843_setup_adc(lithium_t *lith, int framerate, int fmt, int channels) -{ - int da_fmt = 0; - - DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n", - lith, framerate, fmt, channels); - - switch (fmt) { - case AFMT_S8: da_fmt = 1; break; - case AFMT_U8: da_fmt = 1; break; - case AFMT_S16_LE: da_fmt = 1; break; - case AFMT_MU_LAW: da_fmt = 2; break; - case AFMT_A_LAW: da_fmt = 3; break; - default: ASSERT(0); - } - - DBGPV("da_fmt = %d\n", da_fmt); - ASSERT(framerate >= 4000 && framerate <= 49000); - ad1843_write_bits(lith, &ad1843_C2C, framerate); - ad1843_write_multi(lith, 2, - &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt); -} - -static void ad1843_shutdown_adc(lithium_t *lith) -{ - /* nothing to do */ -} - -/* - * Fully initialize the ad1843. As described in the AD1843 data - * sheet, section "START-UP SEQUENCE". The numbered comments are - * subsection headings from the data sheet. See the data sheet, pages - * 52-54, for more info. - * - * return 0 on success, -errno on failure. */ - -static int __init ad1843_init(lithium_t *lith) -{ - unsigned long later; - int err; - - err = li_init(lith); - if (err) - return err; - - if (ad1843_read_bits(lith, &ad1843_INIT) != 0) { - printk(KERN_ERR "vwsnd sound: AD1843 won't initialize\n"); - return -EIO; - } - - ad1843_write_bits(lith, &ad1843_SCF, 1); - - /* 4. Put the conversion resources into standby. */ - - ad1843_write_bits(lith, &ad1843_PDNI, 0); - later = jiffies + HZ / 2; /* roughly half a second */ - DBGDO(shut_up++); - while (ad1843_read_bits(lith, &ad1843_PDNO)) { - if (time_after(jiffies, later)) { - printk(KERN_ERR - "vwsnd audio: AD1843 won't power up\n"); - return -EIO; - } - schedule(); - } - DBGDO(shut_up--); - - /* 5. Power up the clock generators and enable clock output pins. */ - - ad1843_write_multi(lith, 2, &ad1843_C1EN, 1, &ad1843_C2EN, 1); - - /* 6. Configure conversion resources while they are in standby. */ - - /* DAC1 uses clock 1 as source, ADC uses clock 2. Always. */ - - ad1843_write_multi(lith, 3, - &ad1843_DA1C, 1, - &ad1843_ADLC, 2, - &ad1843_ADRC, 2); - - /* 7. Enable conversion resources. */ - - ad1843_write_bits(lith, &ad1843_ADTLK, 1); - ad1843_write_multi(lith, 5, - &ad1843_ANAEN, 1, - &ad1843_AAMEN, 1, - &ad1843_DA1EN, 1, - &ad1843_ADLEN, 1, - &ad1843_ADREN, 1); - - /* 8. Configure conversion resources while they are enabled. */ - - ad1843_write_bits(lith, &ad1843_DA1C, 1); - - /* Unmute all channels. */ - - ad1843_set_outsrc(lith, - (SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_MIC | SOUND_MASK_CD)); - ad1843_write_multi(lith, 2, &ad1843_LDA1AM, 0, &ad1843_RDA1AM, 0); - - /* Set default recording source to Line In and set - * mic gain to +20 dB. - */ - - ad1843_set_recsrc(lith, SOUND_MASK_LINE); - ad1843_write_multi(lith, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1); - - /* Set Speaker Out level to +/- 4V and unmute it. */ - - ad1843_write_multi(lith, 2, &ad1843_HPOS, 1, &ad1843_HPOM, 0); - - return 0; -} - -/*****************************************************************************/ -/* PCM I/O */ - -#define READ_INTR_MASK (LI_INTR_COMM1_TRIG | LI_INTR_COMM1_OVERFLOW) -#define WRITE_INTR_MASK (LI_INTR_COMM2_TRIG | LI_INTR_COMM2_UNDERFLOW) - -typedef enum vwsnd_port_swstate { /* software state */ - SW_OFF, - SW_INITIAL, - SW_RUN, - SW_DRAIN, -} vwsnd_port_swstate_t; - -typedef enum vwsnd_port_hwstate { /* hardware state */ - HW_STOPPED, - HW_RUNNING, -} vwsnd_port_hwstate_t; - -/* - * These flags are read by ISR, but only written at baseline. - */ - -typedef enum vwsnd_port_flags { - DISABLED = 1 << 0, - ERFLOWN = 1 << 1, /* overflown or underflown */ - HW_BUSY = 1 << 2, -} vwsnd_port_flags_t; - -/* - * vwsnd_port is the per-port data structure. Each device has two - * ports, one for input and one for output. - * - * Locking: - * - * port->lock protects: hwstate, flags, swb_[iu]_avail. - * - * devc->io_mutex protects: swstate, sw_*, swb_[iu]_idx. - * - * everything else is only written by open/release or - * pcm_{setup,shutdown}(), which are serialized by a - * combination of devc->open_mutex and devc->io_mutex. - */ - -typedef struct vwsnd_port { - - spinlock_t lock; - wait_queue_head_t queue; - vwsnd_port_swstate_t swstate; - vwsnd_port_hwstate_t hwstate; - vwsnd_port_flags_t flags; - - int sw_channels; - int sw_samplefmt; - int sw_framerate; - int sample_size; - int frame_size; - unsigned int zero_word; /* zero for the sample format */ - - int sw_fragshift; - int sw_fragcount; - int sw_subdivshift; - - unsigned int hw_fragshift; - unsigned int hw_fragsize; - unsigned int hw_fragcount; - - int hwbuf_size; - unsigned long hwbuf_paddr; - unsigned long hwbuf_vaddr; - void * hwbuf; /* hwbuf == hwbuf_vaddr */ - int hwbuf_max; /* max bytes to preload */ - - void * swbuf; - unsigned int swbuf_size; /* size in bytes */ - unsigned int swb_u_idx; /* index of next user byte */ - unsigned int swb_i_idx; /* index of next intr byte */ - unsigned int swb_u_avail; /* # bytes avail to user */ - unsigned int swb_i_avail; /* # bytes avail to intr */ - - dma_chan_t chan; - - /* Accounting */ - - int byte_count; - int frag_count; - int MSC_offset; - -} vwsnd_port_t; - -/* vwsnd_dev is the per-device data structure. */ - -typedef struct vwsnd_dev { - struct vwsnd_dev *next_dev; - int audio_minor; /* minor number of audio device */ - int mixer_minor; /* minor number of mixer device */ - - struct mutex open_mutex; - struct mutex io_mutex; - struct mutex mix_mutex; - fmode_t open_mode; - wait_queue_head_t open_wait; - - lithium_t lith; - - vwsnd_port_t rport; - vwsnd_port_t wport; -} vwsnd_dev_t; - -static vwsnd_dev_t *vwsnd_dev_list; /* linked list of all devices */ - -static atomic_t vwsnd_use_count = ATOMIC_INIT(0); - -# define INC_USE_COUNT (atomic_inc(&vwsnd_use_count)) -# define DEC_USE_COUNT (atomic_dec(&vwsnd_use_count)) -# define IN_USE (atomic_read(&vwsnd_use_count) != 0) - -/* - * Lithium can only DMA multiples of 32 bytes. Its DMA buffer may - * be up to 8 Kb. This driver always uses 8 Kb. - * - * Memory bug workaround -- I'm not sure what's going on here, but - * somehow pcm_copy_out() was triggering segv's going on to the next - * page of the hw buffer. So, I make the hw buffer one size bigger - * than we actually use. That way, the following page is allocated - * and mapped, and no error. I suspect that something is broken - * in Cobalt, but haven't really investigated. HBO is the actual - * size of the buffer, and HWBUF_ORDER is what we allocate. - */ - -#define HWBUF_SHIFT 13 -#define HWBUF_SIZE (1 << HWBUF_SHIFT) -# define HBO (HWBUF_SHIFT > PAGE_SHIFT ? HWBUF_SHIFT - PAGE_SHIFT : 0) -# define HWBUF_ORDER (HBO + 1) /* next size bigger */ -#define MIN_SPEED 4000 -#define MAX_SPEED 49000 - -#define MIN_FRAGSHIFT (DMACHUNK_SHIFT + 1) -#define MAX_FRAGSHIFT (PAGE_SHIFT) -#define MIN_FRAGSIZE (1 << MIN_FRAGSHIFT) -#define MAX_FRAGSIZE (1 << MAX_FRAGSHIFT) -#define MIN_FRAGCOUNT(fragsize) 3 -#define MAX_FRAGCOUNT(fragsize) (32 * PAGE_SIZE / (fragsize)) -#define DEFAULT_FRAGSHIFT 12 -#define DEFAULT_FRAGCOUNT 16 -#define DEFAULT_SUBDIVSHIFT 0 - -/* - * The software buffer (swbuf) is a ring buffer shared between user - * level and interrupt level. Each level owns some of the bytes in - * the buffer, and may give bytes away by calling swb_inc_{u,i}(). - * User level calls _u for user, and interrupt level calls _i for - * interrupt. - * - * port->swb_{u,i}_avail is the number of bytes available to that level. - * - * port->swb_{u,i}_idx is the index of the first available byte in the - * buffer. - * - * Each level calls swb_inc_{u,i}() to atomically increment its index, - * recalculate the number of bytes available for both sides, and - * return the number of bytes available. Since each side can only - * give away bytes, the other side can only increase the number of - * bytes available to this side. Each side updates its own index - * variable, swb_{u,i}_idx, so no lock is needed to read it. - * - * To query the number of bytes available, call swb_inc_{u,i} with an - * increment of zero. - */ - -static __inline__ unsigned int __swb_inc_u(vwsnd_port_t *port, int inc) -{ - if (inc) { - port->swb_u_idx += inc; - port->swb_u_idx %= port->swbuf_size; - port->swb_u_avail -= inc; - port->swb_i_avail += inc; - } - return port->swb_u_avail; -} - -static __inline__ unsigned int swb_inc_u(vwsnd_port_t *port, int inc) -{ - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - { - ret = __swb_inc_u(port, inc); - } - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - -static __inline__ unsigned int __swb_inc_i(vwsnd_port_t *port, int inc) -{ - if (inc) { - port->swb_i_idx += inc; - port->swb_i_idx %= port->swbuf_size; - port->swb_i_avail -= inc; - port->swb_u_avail += inc; - } - return port->swb_i_avail; -} - -static __inline__ unsigned int swb_inc_i(vwsnd_port_t *port, int inc) -{ - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - { - ret = __swb_inc_i(port, inc); - } - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - -/* - * pcm_setup - this routine initializes all port state after - * mode-setting ioctls have been done, but before the first I/O is - * done. - * - * Locking: called with devc->io_mutex held. - * - * Returns 0 on success, -errno on failure. - */ - -static int pcm_setup(vwsnd_dev_t *devc, - vwsnd_port_t *rport, - vwsnd_port_t *wport) -{ - vwsnd_port_t *aport = rport ? rport : wport; - int sample_size; - unsigned int zero_word; - - DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport); - - ASSERT(aport != NULL); - if (aport->swbuf != NULL) - return 0; - switch (aport->sw_samplefmt) { - case AFMT_MU_LAW: - sample_size = 1; - zero_word = 0xFFFFFFFF ^ 0x80808080; - break; - - case AFMT_A_LAW: - sample_size = 1; - zero_word = 0xD5D5D5D5 ^ 0x80808080; - break; - - case AFMT_U8: - sample_size = 1; - zero_word = 0x80808080; - break; - - case AFMT_S8: - sample_size = 1; - zero_word = 0x00000000; - break; - - case AFMT_S16_LE: - sample_size = 2; - zero_word = 0x00000000; - break; - - default: - sample_size = 0; /* prevent compiler warning */ - zero_word = 0; - ASSERT(0); - } - aport->sample_size = sample_size; - aport->zero_word = zero_word; - aport->frame_size = aport->sw_channels * aport->sample_size; - aport->hw_fragshift = aport->sw_fragshift - aport->sw_subdivshift; - aport->hw_fragsize = 1 << aport->hw_fragshift; - aport->hw_fragcount = aport->sw_fragcount << aport->sw_subdivshift; - ASSERT(aport->hw_fragsize >= MIN_FRAGSIZE); - ASSERT(aport->hw_fragsize <= MAX_FRAGSIZE); - ASSERT(aport->hw_fragcount >= MIN_FRAGCOUNT(aport->hw_fragsize)); - ASSERT(aport->hw_fragcount <= MAX_FRAGCOUNT(aport->hw_fragsize)); - if (rport) { - int hwfrags, swfrags; - rport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE; - hwfrags = rport->hwbuf_max >> aport->hw_fragshift; - swfrags = aport->hw_fragcount - hwfrags; - if (swfrags < 2) - swfrags = 2; - rport->swbuf_size = swfrags * aport->hw_fragsize; - DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags); - DBGPV("read hwbuf_max = %d, swbuf_size = %d\n", - rport->hwbuf_max, rport->swbuf_size); - } - if (wport) { - int hwfrags, swfrags; - int total_bytes = aport->hw_fragcount * aport->hw_fragsize; - wport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE; - if (wport->hwbuf_max > total_bytes) - wport->hwbuf_max = total_bytes; - hwfrags = wport->hwbuf_max >> aport->hw_fragshift; - DBGPV("hwfrags = %d\n", hwfrags); - swfrags = aport->hw_fragcount - hwfrags; - if (swfrags < 2) - swfrags = 2; - wport->swbuf_size = swfrags * aport->hw_fragsize; - DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags); - DBGPV("write hwbuf_max = %d, swbuf_size = %d\n", - wport->hwbuf_max, wport->swbuf_size); - } - - aport->swb_u_idx = 0; - aport->swb_i_idx = 0; - aport->byte_count = 0; - - /* - * Is this a Cobalt bug? We need to make this buffer extend - * one page further than we actually use -- somehow memcpy - * causes an exceptoin otherwise. I suspect there's a bug in - * Cobalt (or somewhere) where it's generating a fault on a - * speculative load or something. Obviously, I haven't taken - * the time to track it down. - */ - - aport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE); - if (!aport->swbuf) - return -ENOMEM; - if (rport && wport) { - ASSERT(aport == rport); - ASSERT(wport->swbuf == NULL); - /* One extra page - see comment above. */ - wport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE); - if (!wport->swbuf) { - vfree(aport->swbuf); - aport->swbuf = NULL; - return -ENOMEM; - } - wport->sample_size = rport->sample_size; - wport->zero_word = rport->zero_word; - wport->frame_size = rport->frame_size; - wport->hw_fragshift = rport->hw_fragshift; - wport->hw_fragsize = rport->hw_fragsize; - wport->hw_fragcount = rport->hw_fragcount; - wport->swbuf_size = rport->swbuf_size; - wport->hwbuf_max = rport->hwbuf_max; - wport->swb_u_idx = rport->swb_u_idx; - wport->swb_i_idx = rport->swb_i_idx; - wport->byte_count = rport->byte_count; - } - if (rport) { - rport->swb_u_avail = 0; - rport->swb_i_avail = rport->swbuf_size; - rport->swstate = SW_RUN; - li_setup_dma(&rport->chan, - &li_comm1, - &devc->lith, - rport->hwbuf_paddr, - HWBUF_SHIFT, - rport->hw_fragshift, - rport->sw_channels, - rport->sample_size); - ad1843_setup_adc(&devc->lith, - rport->sw_framerate, - rport->sw_samplefmt, - rport->sw_channels); - li_enable_interrupts(&devc->lith, READ_INTR_MASK); - if (!(rport->flags & DISABLED)) { - ustmsc_t ustmsc; - rport->hwstate = HW_RUNNING; - li_activate_dma(&rport->chan); - li_read_USTMSC(&rport->chan, &ustmsc); - rport->MSC_offset = ustmsc.msc; - } - } - if (wport) { - if (wport->hwbuf_max > wport->swbuf_size) - wport->hwbuf_max = wport->swbuf_size; - wport->flags &= ~ERFLOWN; - wport->swb_u_avail = wport->swbuf_size; - wport->swb_i_avail = 0; - wport->swstate = SW_RUN; - li_setup_dma(&wport->chan, - &li_comm2, - &devc->lith, - wport->hwbuf_paddr, - HWBUF_SHIFT, - wport->hw_fragshift, - wport->sw_channels, - wport->sample_size); - ad1843_setup_dac(&devc->lith, - wport->sw_framerate, - wport->sw_samplefmt, - wport->sw_channels); - li_enable_interrupts(&devc->lith, WRITE_INTR_MASK); - } - DBGRV(); - return 0; -} - -/* - * pcm_shutdown_port - shut down one port (direction) for PCM I/O. - * Only called from pcm_shutdown. - */ - -static void pcm_shutdown_port(vwsnd_dev_t *devc, - vwsnd_port_t *aport, - unsigned int mask) -{ - unsigned long flags; - vwsnd_port_hwstate_t hwstate; - DECLARE_WAITQUEUE(wait, current); - - aport->swstate = SW_INITIAL; - add_wait_queue(&aport->queue, &wait); - while (1) { - set_current_state(TASK_UNINTERRUPTIBLE); - spin_lock_irqsave(&aport->lock, flags); - { - hwstate = aport->hwstate; - } - spin_unlock_irqrestore(&aport->lock, flags); - if (hwstate == HW_STOPPED) - break; - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&aport->queue, &wait); - li_disable_interrupts(&devc->lith, mask); - if (aport == &devc->rport) - ad1843_shutdown_adc(&devc->lith); - else /* aport == &devc->wport) */ - ad1843_shutdown_dac(&devc->lith); - li_shutdown_dma(&aport->chan); - vfree(aport->swbuf); - aport->swbuf = NULL; - aport->byte_count = 0; -} - -/* - * pcm_shutdown undoes what pcm_setup did. - * Also sets the ports' swstate to newstate. - */ - -static void pcm_shutdown(vwsnd_dev_t *devc, - vwsnd_port_t *rport, - vwsnd_port_t *wport) -{ - DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport); - - if (rport && rport->swbuf) { - DBGPV("shutting down rport\n"); - pcm_shutdown_port(devc, rport, READ_INTR_MASK); - } - if (wport && wport->swbuf) { - DBGPV("shutting down wport\n"); - pcm_shutdown_port(devc, wport, WRITE_INTR_MASK); - } - DBGRV(); -} - -static void pcm_copy_in(vwsnd_port_t *rport, int swidx, int hwidx, int nb) -{ - char *src = rport->hwbuf + hwidx; - char *dst = rport->swbuf + swidx; - int fmt = rport->sw_samplefmt; - - DBGPV("swidx = %d, hwidx = %d\n", swidx, hwidx); - ASSERT(rport->hwbuf != NULL); - ASSERT(rport->swbuf != NULL); - ASSERT(nb > 0 && (nb % 32) == 0); - ASSERT(swidx % 32 == 0 && hwidx % 32 == 0); - ASSERT(swidx >= 0 && swidx + nb <= rport->swbuf_size); - ASSERT(hwidx >= 0 && hwidx + nb <= rport->hwbuf_size); - - if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) { - - /* See Sample Format Notes above. */ - - char *end = src + nb; - while (src < end) - *dst++ = *src++ ^ 0x80; - } else - memcpy(dst, src, nb); -} - -static void pcm_copy_out(vwsnd_port_t *wport, int swidx, int hwidx, int nb) -{ - char *src = wport->swbuf + swidx; - char *dst = wport->hwbuf + hwidx; - int fmt = wport->sw_samplefmt; - - ASSERT(nb > 0 && (nb % 32) == 0); - ASSERT(wport->hwbuf != NULL); - ASSERT(wport->swbuf != NULL); - ASSERT(swidx % 32 == 0 && hwidx % 32 == 0); - ASSERT(swidx >= 0 && swidx + nb <= wport->swbuf_size); - ASSERT(hwidx >= 0 && hwidx + nb <= wport->hwbuf_size); - if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) { - - /* See Sample Format Notes above. */ - - char *end = src + nb; - while (src < end) - *dst++ = *src++ ^ 0x80; - } else - memcpy(dst, src, nb); -} - -/* - * pcm_output() is called both from baselevel and from interrupt level. - * This is where audio frames are copied into the hardware-accessible - * ring buffer. - * - * Locking note: The part of this routine that figures out what to do - * holds wport->lock. The longer part releases wport->lock, but sets - * wport->flags & HW_BUSY. Afterward, it reacquires wport->lock, and - * checks for more work to do. - * - * If another thread calls pcm_output() while HW_BUSY is set, it - * returns immediately, knowing that the thread that set HW_BUSY will - * look for more work to do before returning. - * - * This has the advantage that port->lock is held for several short - * periods instead of one long period. Also, when pcm_output is - * called from base level, it reenables interrupts. - */ - -static void pcm_output(vwsnd_dev_t *devc, int erflown, int nb) -{ - vwsnd_port_t *wport = &devc->wport; - const int hwmax = wport->hwbuf_max; - const int hwsize = wport->hwbuf_size; - const int swsize = wport->swbuf_size; - const int fragsize = wport->hw_fragsize; - unsigned long iflags; - - DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb); - spin_lock_irqsave(&wport->lock, iflags); - if (erflown) - wport->flags |= ERFLOWN; - (void) __swb_inc_u(wport, nb); - if (wport->flags & HW_BUSY) { - spin_unlock_irqrestore(&wport->lock, iflags); - DBGPV("returning: HW BUSY\n"); - return; - } - if (wport->flags & DISABLED) { - spin_unlock_irqrestore(&wport->lock, iflags); - DBGPV("returning: DISABLED\n"); - return; - } - wport->flags |= HW_BUSY; - while (1) { - int swptr, hwptr, hw_avail, sw_avail, swidx; - vwsnd_port_hwstate_t hwstate = wport->hwstate; - vwsnd_port_swstate_t swstate = wport->swstate; - int hw_unavail; - ustmsc_t ustmsc; - - hwptr = li_read_hwptr(&wport->chan); - swptr = li_read_swptr(&wport->chan); - hw_unavail = (swptr - hwptr + hwsize) % hwsize; - hw_avail = (hwmax - hw_unavail) & -fragsize; - sw_avail = wport->swb_i_avail & -fragsize; - if (sw_avail && swstate == SW_RUN) { - if (wport->flags & ERFLOWN) { - wport->flags &= ~ERFLOWN; - } - } else if (swstate == SW_INITIAL || - swstate == SW_OFF || - (swstate == SW_DRAIN && - !sw_avail && - (wport->flags & ERFLOWN))) { - DBGP("stopping. hwstate = %d\n", hwstate); - if (hwstate != HW_STOPPED) { - li_deactivate_dma(&wport->chan); - wport->hwstate = HW_STOPPED; - } - wake_up(&wport->queue); - break; - } - if (!sw_avail || !hw_avail) - break; - spin_unlock_irqrestore(&wport->lock, iflags); - - /* - * We gave up the port lock, but we have the HW_BUSY flag. - * Proceed without accessing any nonlocal state. - * Do not exit the loop -- must check for more work. - */ - - swidx = wport->swb_i_idx; - nb = hw_avail; - if (nb > sw_avail) - nb = sw_avail; - if (nb > hwsize - swptr) - nb = hwsize - swptr; /* don't overflow hwbuf */ - if (nb > swsize - swidx) - nb = swsize - swidx; /* don't overflow swbuf */ - ASSERT(nb > 0); - if (nb % fragsize) { - DBGP("nb = %d, fragsize = %d\n", nb, fragsize); - DBGP("hw_avail = %d\n", hw_avail); - DBGP("sw_avail = %d\n", sw_avail); - DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr); - DBGP("swsize = %d, swidx = %d\n", swsize, swidx); - } - ASSERT(!(nb % fragsize)); - DBGPV("copying swb[%d..%d] to hwb[%d..%d]\n", - swidx, swidx + nb, swptr, swptr + nb); - pcm_copy_out(wport, swidx, swptr, nb); - li_write_swptr(&wport->chan, (swptr + nb) % hwsize); - spin_lock_irqsave(&wport->lock, iflags); - if (hwstate == HW_STOPPED) { - DBGPV("starting\n"); - li_activate_dma(&wport->chan); - wport->hwstate = HW_RUNNING; - li_read_USTMSC(&wport->chan, &ustmsc); - ASSERT(wport->byte_count % wport->frame_size == 0); - wport->MSC_offset = ustmsc.msc - wport->byte_count / wport->frame_size; - } - __swb_inc_i(wport, nb); - wport->byte_count += nb; - wport->frag_count += nb / fragsize; - ASSERT(nb % fragsize == 0); - wake_up(&wport->queue); - } - wport->flags &= ~HW_BUSY; - spin_unlock_irqrestore(&wport->lock, iflags); - DBGRV(); -} - -/* - * pcm_input() is called both from baselevel and from interrupt level. - * This is where audio frames are copied out of the hardware-accessible - * ring buffer. - * - * Locking note: The part of this routine that figures out what to do - * holds rport->lock. The longer part releases rport->lock, but sets - * rport->flags & HW_BUSY. Afterward, it reacquires rport->lock, and - * checks for more work to do. - * - * If another thread calls pcm_input() while HW_BUSY is set, it - * returns immediately, knowing that the thread that set HW_BUSY will - * look for more work to do before returning. - * - * This has the advantage that port->lock is held for several short - * periods instead of one long period. Also, when pcm_input is - * called from base level, it reenables interrupts. - */ - -static void pcm_input(vwsnd_dev_t *devc, int erflown, int nb) -{ - vwsnd_port_t *rport = &devc->rport; - const int hwmax = rport->hwbuf_max; - const int hwsize = rport->hwbuf_size; - const int swsize = rport->swbuf_size; - const int fragsize = rport->hw_fragsize; - unsigned long iflags; - - DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb); - - spin_lock_irqsave(&rport->lock, iflags); - if (erflown) - rport->flags |= ERFLOWN; - (void) __swb_inc_u(rport, nb); - if (rport->flags & HW_BUSY || !rport->swbuf) { - spin_unlock_irqrestore(&rport->lock, iflags); - DBGPV("returning: HW BUSY or !swbuf\n"); - return; - } - if (rport->flags & DISABLED) { - spin_unlock_irqrestore(&rport->lock, iflags); - DBGPV("returning: DISABLED\n"); - return; - } - rport->flags |= HW_BUSY; - while (1) { - int swptr, hwptr, hw_avail, sw_avail, swidx; - vwsnd_port_hwstate_t hwstate = rport->hwstate; - vwsnd_port_swstate_t swstate = rport->swstate; - - hwptr = li_read_hwptr(&rport->chan); - swptr = li_read_swptr(&rport->chan); - hw_avail = (hwptr - swptr + hwsize) % hwsize & -fragsize; - if (hw_avail > hwmax) - hw_avail = hwmax; - sw_avail = rport->swb_i_avail & -fragsize; - if (swstate != SW_RUN) { - DBGP("stopping. hwstate = %d\n", hwstate); - if (hwstate != HW_STOPPED) { - li_deactivate_dma(&rport->chan); - rport->hwstate = HW_STOPPED; - } - wake_up(&rport->queue); - break; - } - if (!sw_avail || !hw_avail) - break; - spin_unlock_irqrestore(&rport->lock, iflags); - - /* - * We gave up the port lock, but we have the HW_BUSY flag. - * Proceed without accessing any nonlocal state. - * Do not exit the loop -- must check for more work. - */ - - swidx = rport->swb_i_idx; - nb = hw_avail; - if (nb > sw_avail) - nb = sw_avail; - if (nb > hwsize - swptr) - nb = hwsize - swptr; /* don't overflow hwbuf */ - if (nb > swsize - swidx) - nb = swsize - swidx; /* don't overflow swbuf */ - ASSERT(nb > 0); - if (nb % fragsize) { - DBGP("nb = %d, fragsize = %d\n", nb, fragsize); - DBGP("hw_avail = %d\n", hw_avail); - DBGP("sw_avail = %d\n", sw_avail); - DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr); - DBGP("swsize = %d, swidx = %d\n", swsize, swidx); - } - ASSERT(!(nb % fragsize)); - DBGPV("copying hwb[%d..%d] to swb[%d..%d]\n", - swptr, swptr + nb, swidx, swidx + nb); - pcm_copy_in(rport, swidx, swptr, nb); - li_write_swptr(&rport->chan, (swptr + nb) % hwsize); - spin_lock_irqsave(&rport->lock, iflags); - __swb_inc_i(rport, nb); - rport->byte_count += nb; - rport->frag_count += nb / fragsize; - ASSERT(nb % fragsize == 0); - wake_up(&rport->queue); - } - rport->flags &= ~HW_BUSY; - spin_unlock_irqrestore(&rport->lock, iflags); - DBGRV(); -} - -/* - * pcm_flush_frag() writes zero samples to fill the current fragment, - * then flushes it to the hardware. - * - * It is only meaningful to flush output, not input. - */ - -static void pcm_flush_frag(vwsnd_dev_t *devc) -{ - vwsnd_port_t *wport = &devc->wport; - - DBGPV("swstate = %d\n", wport->swstate); - if (wport->swstate == SW_RUN) { - int idx = wport->swb_u_idx; - int end = (idx + wport->hw_fragsize - 1) - >> wport->hw_fragshift - << wport->hw_fragshift; - int nb = end - idx; - DBGPV("clearing %d bytes\n", nb); - if (nb) - memset(wport->swbuf + idx, - (char) wport->zero_word, - nb); - wport->swstate = SW_DRAIN; - pcm_output(devc, 0, nb); - } - DBGRV(); -} - -/* - * Wait for output to drain. This sleeps uninterruptibly because - * there is nothing intelligent we can do if interrupted. This - * means the process will be delayed in responding to the signal. - */ - -static void pcm_write_sync(vwsnd_dev_t *devc) -{ - vwsnd_port_t *wport = &devc->wport; - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - vwsnd_port_hwstate_t hwstate; - - DBGEV("(devc=0x%p)\n", devc); - add_wait_queue(&wport->queue, &wait); - while (1) { - set_current_state(TASK_UNINTERRUPTIBLE); - spin_lock_irqsave(&wport->lock, flags); - { - hwstate = wport->hwstate; - } - spin_unlock_irqrestore(&wport->lock, flags); - if (hwstate == HW_STOPPED) - break; - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&wport->queue, &wait); - DBGPV("swstate = %d, hwstate = %d\n", wport->swstate, wport->hwstate); - DBGRV(); -} - -/*****************************************************************************/ -/* audio driver */ - -/* - * seek on an audio device always fails. - */ - -static void vwsnd_audio_read_intr(vwsnd_dev_t *devc, unsigned int status) -{ - int overflown = status & LI_INTR_COMM1_OVERFLOW; - - if (status & READ_INTR_MASK) - pcm_input(devc, overflown, 0); -} - -static void vwsnd_audio_write_intr(vwsnd_dev_t *devc, unsigned int status) -{ - int underflown = status & LI_INTR_COMM2_UNDERFLOW; - - if (status & WRITE_INTR_MASK) - pcm_output(devc, underflown, 0); -} - -static irqreturn_t vwsnd_audio_intr(int irq, void *dev_id) -{ - vwsnd_dev_t *devc = dev_id; - unsigned int status; - - DBGEV("(irq=%d, dev_id=0x%p)\n", irq, dev_id); - - status = li_get_clear_intr_status(&devc->lith); - vwsnd_audio_read_intr(devc, status); - vwsnd_audio_write_intr(devc, status); - return IRQ_HANDLED; -} - -static ssize_t vwsnd_audio_do_read(struct file *file, - char *buffer, - size_t count, - loff_t *ppos) -{ - vwsnd_dev_t *devc = file->private_data; - vwsnd_port_t *rport = ((file->f_mode & FMODE_READ) ? - &devc->rport : NULL); - int ret, nb; - - DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n", - file, buffer, count, ppos); - - if (!rport) - return -EINVAL; - - if (rport->swbuf == NULL) { - vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? - &devc->wport : NULL; - ret = pcm_setup(devc, rport, wport); - if (ret < 0) - return ret; - } - - if (!access_ok(VERIFY_READ, buffer, count)) - return -EFAULT; - ret = 0; - while (count) { - DECLARE_WAITQUEUE(wait, current); - add_wait_queue(&rport->queue, &wait); - while ((nb = swb_inc_u(rport, 0)) == 0) { - DBGPV("blocking\n"); - set_current_state(TASK_INTERRUPTIBLE); - if (rport->flags & DISABLED || - file->f_flags & O_NONBLOCK) { - current->state = TASK_RUNNING; - remove_wait_queue(&rport->queue, &wait); - return ret ? ret : -EAGAIN; - } - schedule(); - if (signal_pending(current)) { - current->state = TASK_RUNNING; - remove_wait_queue(&rport->queue, &wait); - return ret ? ret : -ERESTARTSYS; - } - } - current->state = TASK_RUNNING; - remove_wait_queue(&rport->queue, &wait); - pcm_input(devc, 0, 0); - /* nb bytes are available in userbuf. */ - if (nb > count) - nb = count; - DBGPV("nb = %d\n", nb); - if (copy_to_user(buffer, rport->swbuf + rport->swb_u_idx, nb)) - return -EFAULT; - (void) swb_inc_u(rport, nb); - buffer += nb; - count -= nb; - ret += nb; - } - DBGPV("returning %d\n", ret); - return ret; -} - -static ssize_t vwsnd_audio_read(struct file *file, - char *buffer, - size_t count, - loff_t *ppos) -{ - vwsnd_dev_t *devc = file->private_data; - ssize_t ret; - - mutex_lock(&devc->io_mutex); - ret = vwsnd_audio_do_read(file, buffer, count, ppos); - mutex_unlock(&devc->io_mutex); - return ret; -} - -static ssize_t vwsnd_audio_do_write(struct file *file, - const char *buffer, - size_t count, - loff_t *ppos) -{ - vwsnd_dev_t *devc = file->private_data; - vwsnd_port_t *wport = ((file->f_mode & FMODE_WRITE) ? - &devc->wport : NULL); - int ret, nb; - - DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n", - file, buffer, count, ppos); - - if (!wport) - return -EINVAL; - - if (wport->swbuf == NULL) { - vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? - &devc->rport : NULL; - ret = pcm_setup(devc, rport, wport); - if (ret < 0) - return ret; - } - if (!access_ok(VERIFY_WRITE, buffer, count)) - return -EFAULT; - ret = 0; - while (count) { - DECLARE_WAITQUEUE(wait, current); - add_wait_queue(&wport->queue, &wait); - while ((nb = swb_inc_u(wport, 0)) == 0) { - set_current_state(TASK_INTERRUPTIBLE); - if (wport->flags & DISABLED || - file->f_flags & O_NONBLOCK) { - current->state = TASK_RUNNING; - remove_wait_queue(&wport->queue, &wait); - return ret ? ret : -EAGAIN; - } - schedule(); - if (signal_pending(current)) { - current->state = TASK_RUNNING; - remove_wait_queue(&wport->queue, &wait); - return ret ? ret : -ERESTARTSYS; - } - } - current->state = TASK_RUNNING; - remove_wait_queue(&wport->queue, &wait); - /* nb bytes are available in userbuf. */ - if (nb > count) - nb = count; - DBGPV("nb = %d\n", nb); - if (copy_from_user(wport->swbuf + wport->swb_u_idx, buffer, nb)) - return -EFAULT; - pcm_output(devc, 0, nb); - buffer += nb; - count -= nb; - ret += nb; - } - DBGPV("returning %d\n", ret); - return ret; -} - -static ssize_t vwsnd_audio_write(struct file *file, - const char *buffer, - size_t count, - loff_t *ppos) -{ - vwsnd_dev_t *devc = file->private_data; - ssize_t ret; - - mutex_lock(&devc->io_mutex); - ret = vwsnd_audio_do_write(file, buffer, count, ppos); - mutex_unlock(&devc->io_mutex); - return ret; -} - -/* No kernel lock - fine */ -static unsigned int vwsnd_audio_poll(struct file *file, - struct poll_table_struct *wait) -{ - vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; - vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? - &devc->rport : NULL; - vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? - &devc->wport : NULL; - unsigned int mask = 0; - - DBGEV("(file=0x%p, wait=0x%p)\n", file, wait); - - ASSERT(rport || wport); - if (rport) { - poll_wait(file, &rport->queue, wait); - if (swb_inc_u(rport, 0)) - mask |= (POLLIN | POLLRDNORM); - } - if (wport) { - poll_wait(file, &wport->queue, wait); - if (wport->swbuf == NULL || swb_inc_u(wport, 0)) - mask |= (POLLOUT | POLLWRNORM); - } - - DBGPV("returning 0x%x\n", mask); - return mask; -} - -static int vwsnd_audio_do_ioctl(struct file *file, - unsigned int cmd, - unsigned long arg) -{ - vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; - vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? - &devc->rport : NULL; - vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? - &devc->wport : NULL; - vwsnd_port_t *aport = rport ? rport : wport; - struct audio_buf_info buf_info; - struct count_info info; - unsigned long flags; - int ival; - - - DBGEV("(file=0x%p, cmd=0x%x, arg=0x%lx)\n", - file, cmd, arg); - switch (cmd) { - case OSS_GETVERSION: /* _SIOR ('M', 118, int) */ - DBGX("OSS_GETVERSION\n"); - ival = SOUND_VERSION; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_GETCAPS: /* _SIOR ('P',15, int) */ - DBGX("SNDCTL_DSP_GETCAPS\n"); - ival = DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_GETFMTS: /* _SIOR ('P',11, int) */ - DBGX("SNDCTL_DSP_GETFMTS\n"); - ival = (AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | - AFMT_U8 | AFMT_S8); - return put_user(ival, (int *) arg); - break; - - case SOUND_PCM_READ_RATE: /* _SIOR ('P', 2, int) */ - DBGX("SOUND_PCM_READ_RATE\n"); - ival = aport->sw_framerate; - return put_user(ival, (int *) arg); - - case SOUND_PCM_READ_CHANNELS: /* _SIOR ('P', 6, int) */ - DBGX("SOUND_PCM_READ_CHANNELS\n"); - ival = aport->sw_channels; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_SPEED: /* _SIOWR('P', 2, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_SPEED %d\n", ival); - if (ival) { - if (aport->swstate != SW_INITIAL) { - DBGX("SNDCTL_DSP_SPEED failed: swstate = %d\n", - aport->swstate); - return -EINVAL; - } - if (ival < MIN_SPEED) - ival = MIN_SPEED; - if (ival > MAX_SPEED) - ival = MAX_SPEED; - if (rport) - rport->sw_framerate = ival; - if (wport) - wport->sw_framerate = ival; - } else - ival = aport->sw_framerate; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_STEREO: /* _SIOWR('P', 3, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_STEREO %d\n", ival); - if (ival != 0 && ival != 1) - return -EINVAL; - if (aport->swstate != SW_INITIAL) - return -EINVAL; - if (rport) - rport->sw_channels = ival + 1; - if (wport) - wport->sw_channels = ival + 1; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_CHANNELS: /* _SIOWR('P', 6, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_CHANNELS %d\n", ival); - if (ival != 1 && ival != 2) - return -EINVAL; - if (aport->swstate != SW_INITIAL) - return -EINVAL; - if (rport) - rport->sw_channels = ival; - if (wport) - wport->sw_channels = ival; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_GETBLKSIZE: /* _SIOWR('P', 4, int) */ - ival = pcm_setup(devc, rport, wport); - if (ival < 0) { - DBGX("SNDCTL_DSP_GETBLKSIZE failed, errno %d\n", ival); - return ival; - } - ival = 1 << aport->sw_fragshift; - DBGX("SNDCTL_DSP_GETBLKSIZE returning %d\n", ival); - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_SETFRAGMENT: /* _SIOWR('P',10, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_SETFRAGMENT %d:%d\n", - ival >> 16, ival & 0xFFFF); - if (aport->swstate != SW_INITIAL) - return -EINVAL; - { - int sw_fragshift = ival & 0xFFFF; - int sw_subdivshift = aport->sw_subdivshift; - int hw_fragshift = sw_fragshift - sw_subdivshift; - int sw_fragcount = (ival >> 16) & 0xFFFF; - int hw_fragsize; - if (hw_fragshift < MIN_FRAGSHIFT) - hw_fragshift = MIN_FRAGSHIFT; - if (hw_fragshift > MAX_FRAGSHIFT) - hw_fragshift = MAX_FRAGSHIFT; - sw_fragshift = hw_fragshift + aport->sw_subdivshift; - hw_fragsize = 1 << hw_fragshift; - if (sw_fragcount < MIN_FRAGCOUNT(hw_fragsize)) - sw_fragcount = MIN_FRAGCOUNT(hw_fragsize); - if (sw_fragcount > MAX_FRAGCOUNT(hw_fragsize)) - sw_fragcount = MAX_FRAGCOUNT(hw_fragsize); - DBGPV("sw_fragshift = %d\n", sw_fragshift); - DBGPV("rport = 0x%p, wport = 0x%p\n", rport, wport); - if (rport) { - rport->sw_fragshift = sw_fragshift; - rport->sw_fragcount = sw_fragcount; - } - if (wport) { - wport->sw_fragshift = sw_fragshift; - wport->sw_fragcount = sw_fragcount; - } - ival = sw_fragcount << 16 | sw_fragshift; - } - DBGX("SNDCTL_DSP_SETFRAGMENT returns %d:%d\n", - ival >> 16, ival & 0xFFFF); - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_SUBDIVIDE: /* _SIOWR('P', 9, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_SUBDIVIDE %d\n", ival); - if (aport->swstate != SW_INITIAL) - return -EINVAL; - { - int subdivshift; - int hw_fragshift, hw_fragsize, hw_fragcount; - switch (ival) { - case 1: subdivshift = 0; break; - case 2: subdivshift = 1; break; - case 4: subdivshift = 2; break; - default: return -EINVAL; - } - hw_fragshift = aport->sw_fragshift - subdivshift; - if (hw_fragshift < MIN_FRAGSHIFT || - hw_fragshift > MAX_FRAGSHIFT) - return -EINVAL; - hw_fragsize = 1 << hw_fragshift; - hw_fragcount = aport->sw_fragcount >> subdivshift; - if (hw_fragcount < MIN_FRAGCOUNT(hw_fragsize) || - hw_fragcount > MAX_FRAGCOUNT(hw_fragsize)) - return -EINVAL; - if (rport) - rport->sw_subdivshift = subdivshift; - if (wport) - wport->sw_subdivshift = subdivshift; - } - return 0; - - case SNDCTL_DSP_SETFMT: /* _SIOWR('P',5, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_SETFMT %d\n", ival); - if (ival != AFMT_QUERY) { - if (aport->swstate != SW_INITIAL) { - DBGP("SETFMT failed, swstate = %d\n", - aport->swstate); - return -EINVAL; - } - switch (ival) { - case AFMT_MU_LAW: - case AFMT_A_LAW: - case AFMT_U8: - case AFMT_S8: - case AFMT_S16_LE: - if (rport) - rport->sw_samplefmt = ival; - if (wport) - wport->sw_samplefmt = ival; - break; - default: - return -EINVAL; - } - } - ival = aport->sw_samplefmt; - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_GETOSPACE: /* _SIOR ('P',12, audio_buf_info) */ - DBGXV("SNDCTL_DSP_GETOSPACE\n"); - if (!wport) - return -EINVAL; - ival = pcm_setup(devc, rport, wport); - if (ival < 0) - return ival; - ival = swb_inc_u(wport, 0); - buf_info.fragments = ival >> wport->sw_fragshift; - buf_info.fragstotal = wport->sw_fragcount; - buf_info.fragsize = 1 << wport->sw_fragshift; - buf_info.bytes = ival; - DBGXV("SNDCTL_DSP_GETOSPACE returns { %d %d %d %d }\n", - buf_info.fragments, buf_info.fragstotal, - buf_info.fragsize, buf_info.bytes); - if (copy_to_user((void *) arg, &buf_info, sizeof buf_info)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_GETISPACE: /* _SIOR ('P',13, audio_buf_info) */ - DBGX("SNDCTL_DSP_GETISPACE\n"); - if (!rport) - return -EINVAL; - ival = pcm_setup(devc, rport, wport); - if (ival < 0) - return ival; - ival = swb_inc_u(rport, 0); - buf_info.fragments = ival >> rport->sw_fragshift; - buf_info.fragstotal = rport->sw_fragcount; - buf_info.fragsize = 1 << rport->sw_fragshift; - buf_info.bytes = ival; - DBGX("SNDCTL_DSP_GETISPACE returns { %d %d %d %d }\n", - buf_info.fragments, buf_info.fragstotal, - buf_info.fragsize, buf_info.bytes); - if (copy_to_user((void *) arg, &buf_info, sizeof buf_info)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_NONBLOCK: /* _SIO ('P',14) */ - DBGX("SNDCTL_DSP_NONBLOCK\n"); - spin_lock(&file->f_lock); - file->f_flags |= O_NONBLOCK; - spin_unlock(&file->f_lock); - return 0; - - case SNDCTL_DSP_RESET: /* _SIO ('P', 0) */ - DBGX("SNDCTL_DSP_RESET\n"); - /* - * Nothing special needs to be done for input. Input - * samples sit in swbuf, but it will be reinitialized - * to empty when pcm_setup() is called. - */ - if (wport && wport->swbuf) { - wport->swstate = SW_INITIAL; - pcm_output(devc, 0, 0); - pcm_write_sync(devc); - } - pcm_shutdown(devc, rport, wport); - return 0; - - case SNDCTL_DSP_SYNC: /* _SIO ('P', 1) */ - DBGX("SNDCTL_DSP_SYNC\n"); - if (wport) { - pcm_flush_frag(devc); - pcm_write_sync(devc); - } - pcm_shutdown(devc, rport, wport); - return 0; - - case SNDCTL_DSP_POST: /* _SIO ('P', 8) */ - DBGX("SNDCTL_DSP_POST\n"); - if (!wport) - return -EINVAL; - pcm_flush_frag(devc); - return 0; - - case SNDCTL_DSP_GETIPTR: /* _SIOR ('P', 17, count_info) */ - DBGX("SNDCTL_DSP_GETIPTR\n"); - if (!rport) - return -EINVAL; - spin_lock_irqsave(&rport->lock, flags); - { - ustmsc_t ustmsc; - if (rport->hwstate == HW_RUNNING) { - ASSERT(rport->swstate == SW_RUN); - li_read_USTMSC(&rport->chan, &ustmsc); - info.bytes = ustmsc.msc - rport->MSC_offset; - info.bytes *= rport->frame_size; - } else { - info.bytes = rport->byte_count; - } - info.blocks = rport->frag_count; - info.ptr = 0; /* not implemented */ - rport->frag_count = 0; - } - spin_unlock_irqrestore(&rport->lock, flags); - if (copy_to_user((void *) arg, &info, sizeof info)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_GETOPTR: /* _SIOR ('P',18, count_info) */ - DBGX("SNDCTL_DSP_GETOPTR\n"); - if (!wport) - return -EINVAL; - spin_lock_irqsave(&wport->lock, flags); - { - ustmsc_t ustmsc; - if (wport->hwstate == HW_RUNNING) { - ASSERT(wport->swstate == SW_RUN); - li_read_USTMSC(&wport->chan, &ustmsc); - info.bytes = ustmsc.msc - wport->MSC_offset; - info.bytes *= wport->frame_size; - } else { - info.bytes = wport->byte_count; - } - info.blocks = wport->frag_count; - info.ptr = 0; /* not implemented */ - wport->frag_count = 0; - } - spin_unlock_irqrestore(&wport->lock, flags); - if (copy_to_user((void *) arg, &info, sizeof info)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_GETODELAY: /* _SIOR ('P', 23, int) */ - DBGX("SNDCTL_DSP_GETODELAY\n"); - if (!wport) - return -EINVAL; - spin_lock_irqsave(&wport->lock, flags); - { - int fsize = wport->frame_size; - ival = wport->swb_i_avail / fsize; - if (wport->hwstate == HW_RUNNING) { - int swptr, hwptr, hwframes, hwbytes, hwsize; - int totalhwbytes; - ustmsc_t ustmsc; - - hwsize = wport->hwbuf_size; - swptr = li_read_swptr(&wport->chan); - li_read_USTMSC(&wport->chan, &ustmsc); - hwframes = ustmsc.msc - wport->MSC_offset; - totalhwbytes = hwframes * fsize; - hwptr = totalhwbytes % hwsize; - hwbytes = (swptr - hwptr + hwsize) % hwsize; - ival += hwbytes / fsize; - } - } - spin_unlock_irqrestore(&wport->lock, flags); - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_PROFILE: /* _SIOW ('P', 23, int) */ - DBGX("SNDCTL_DSP_PROFILE\n"); - - /* - * Thomas Sailer explains SNDCTL_DSP_PROFILE - * (private email, March 24, 1999): - * - * This gives the sound driver a hint on what it - * should do with partial fragments - * (i.e. fragments partially filled with write). - * This can direct the driver to zero them or - * leave them alone. But don't ask me what this - * is good for, my driver just zeroes the last - * fragment before the receiver stops, no idea - * what good for any other behaviour could - * be. Implementing it as NOP seems safe. - */ - - break; - - case SNDCTL_DSP_GETTRIGGER: /* _SIOR ('P',16, int) */ - DBGX("SNDCTL_DSP_GETTRIGGER\n"); - ival = 0; - if (rport) { - spin_lock_irqsave(&rport->lock, flags); - { - if (!(rport->flags & DISABLED)) - ival |= PCM_ENABLE_INPUT; - } - spin_unlock_irqrestore(&rport->lock, flags); - } - if (wport) { - spin_lock_irqsave(&wport->lock, flags); - { - if (!(wport->flags & DISABLED)) - ival |= PCM_ENABLE_OUTPUT; - } - spin_unlock_irqrestore(&wport->lock, flags); - } - return put_user(ival, (int *) arg); - - case SNDCTL_DSP_SETTRIGGER: /* _SIOW ('P',16, int) */ - if (get_user(ival, (int *) arg)) - return -EFAULT; - DBGX("SNDCTL_DSP_SETTRIGGER %d\n", ival); - - /* - * If user is disabling I/O and port is not in initial - * state, fail with EINVAL. - */ - - if (((rport && !(ival & PCM_ENABLE_INPUT)) || - (wport && !(ival & PCM_ENABLE_OUTPUT))) && - aport->swstate != SW_INITIAL) - return -EINVAL; - - if (rport) { - vwsnd_port_hwstate_t hwstate; - spin_lock_irqsave(&rport->lock, flags); - { - hwstate = rport->hwstate; - if (ival & PCM_ENABLE_INPUT) - rport->flags &= ~DISABLED; - else - rport->flags |= DISABLED; - } - spin_unlock_irqrestore(&rport->lock, flags); - if (hwstate != HW_RUNNING && ival & PCM_ENABLE_INPUT) { - - if (rport->swstate == SW_INITIAL) - pcm_setup(devc, rport, wport); - else - li_activate_dma(&rport->chan); - } - } - if (wport) { - vwsnd_port_flags_t pflags; - spin_lock_irqsave(&wport->lock, flags); - { - pflags = wport->flags; - if (ival & PCM_ENABLE_OUTPUT) - wport->flags &= ~DISABLED; - else - wport->flags |= DISABLED; - } - spin_unlock_irqrestore(&wport->lock, flags); - if (pflags & DISABLED && ival & PCM_ENABLE_OUTPUT) { - if (wport->swstate == SW_RUN) - pcm_output(devc, 0, 0); - } - } - return 0; - - default: - DBGP("unknown ioctl 0x%x\n", cmd); - return -EINVAL; - } - DBGP("unimplemented ioctl 0x%x\n", cmd); - return -EINVAL; -} - -static long vwsnd_audio_ioctl(struct file *file, - unsigned int cmd, - unsigned long arg) -{ - vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; - int ret; - - mutex_lock(&vwsnd_mutex); - mutex_lock(&devc->io_mutex); - ret = vwsnd_audio_do_ioctl(file, cmd, arg); - mutex_unlock(&devc->io_mutex); - mutex_unlock(&vwsnd_mutex); - - return ret; -} - -/* No mmap. */ - -static int vwsnd_audio_mmap(struct file *file, struct vm_area_struct *vma) -{ - DBGE("(file=0x%p, vma=0x%p)\n", file, vma); - return -ENODEV; -} - -/* - * Open the audio device for read and/or write. - * - * Returns 0 on success, -errno on failure. - */ - -static int vwsnd_audio_open(struct inode *inode, struct file *file) -{ - vwsnd_dev_t *devc; - int minor = iminor(inode); - int sw_samplefmt; - DEFINE_WAIT(wait); - - DBGE("(inode=0x%p, file=0x%p)\n", inode, file); - - mutex_lock(&vwsnd_mutex); - INC_USE_COUNT; - for (devc = vwsnd_dev_list; devc; devc = devc->next_dev) - if ((devc->audio_minor & ~0x0F) == (minor & ~0x0F)) - break; - - if (devc == NULL) { - DEC_USE_COUNT; - mutex_unlock(&vwsnd_mutex); - return -ENODEV; - } - - mutex_lock(&devc->open_mutex); - while (1) { - prepare_to_wait(&devc->open_wait, &wait, TASK_INTERRUPTIBLE); - if (!(devc->open_mode & file->f_mode)) - break; - - mutex_unlock(&devc->open_mutex); - mutex_unlock(&vwsnd_mutex); - if (file->f_flags & O_NONBLOCK) { - DEC_USE_COUNT; - return -EBUSY; - } - schedule(); - if (signal_pending(current)) { - DEC_USE_COUNT; - return -ERESTARTSYS; - } - mutex_lock(&vwsnd_mutex); - mutex_lock(&devc->open_mutex); - } - finish_wait(&devc->open_wait, &wait); - devc->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE); - mutex_unlock(&devc->open_mutex); - - /* get default sample format from minor number. */ - - sw_samplefmt = 0; - if ((minor & 0xF) == SND_DEV_DSP) - sw_samplefmt = AFMT_U8; - else if ((minor & 0xF) == SND_DEV_AUDIO) - sw_samplefmt = AFMT_MU_LAW; - else if ((minor & 0xF) == SND_DEV_DSP16) - sw_samplefmt = AFMT_S16_LE; - else - ASSERT(0); - - /* Initialize vwsnd_ports. */ - - mutex_lock(&devc->io_mutex); - { - if (file->f_mode & FMODE_READ) { - devc->rport.swstate = SW_INITIAL; - devc->rport.flags = 0; - devc->rport.sw_channels = 1; - devc->rport.sw_samplefmt = sw_samplefmt; - devc->rport.sw_framerate = 8000; - devc->rport.sw_fragshift = DEFAULT_FRAGSHIFT; - devc->rport.sw_fragcount = DEFAULT_FRAGCOUNT; - devc->rport.sw_subdivshift = DEFAULT_SUBDIVSHIFT; - devc->rport.byte_count = 0; - devc->rport.frag_count = 0; - } - if (file->f_mode & FMODE_WRITE) { - devc->wport.swstate = SW_INITIAL; - devc->wport.flags = 0; - devc->wport.sw_channels = 1; - devc->wport.sw_samplefmt = sw_samplefmt; - devc->wport.sw_framerate = 8000; - devc->wport.sw_fragshift = DEFAULT_FRAGSHIFT; - devc->wport.sw_fragcount = DEFAULT_FRAGCOUNT; - devc->wport.sw_subdivshift = DEFAULT_SUBDIVSHIFT; - devc->wport.byte_count = 0; - devc->wport.frag_count = 0; - } - } - mutex_unlock(&devc->io_mutex); - - file->private_data = devc; - DBGRV(); - mutex_unlock(&vwsnd_mutex); - return 0; -} - -/* - * Release (close) the audio device. - */ - -static int vwsnd_audio_release(struct inode *inode, struct file *file) -{ - vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; - vwsnd_port_t *wport = NULL, *rport = NULL; - int err = 0; - - mutex_lock(&vwsnd_mutex); - mutex_lock(&devc->io_mutex); - { - DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); - - if (file->f_mode & FMODE_READ) - rport = &devc->rport; - if (file->f_mode & FMODE_WRITE) { - wport = &devc->wport; - pcm_flush_frag(devc); - pcm_write_sync(devc); - } - pcm_shutdown(devc, rport, wport); - if (rport) - rport->swstate = SW_OFF; - if (wport) - wport->swstate = SW_OFF; - } - mutex_unlock(&devc->io_mutex); - - mutex_lock(&devc->open_mutex); - { - devc->open_mode &= ~file->f_mode; - } - mutex_unlock(&devc->open_mutex); - wake_up(&devc->open_wait); - DEC_USE_COUNT; - DBGR(); - mutex_unlock(&vwsnd_mutex); - return err; -} - -static const struct file_operations vwsnd_audio_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = vwsnd_audio_read, - .write = vwsnd_audio_write, - .poll = vwsnd_audio_poll, - .unlocked_ioctl = vwsnd_audio_ioctl, - .mmap = vwsnd_audio_mmap, - .open = vwsnd_audio_open, - .release = vwsnd_audio_release, -}; - -/*****************************************************************************/ -/* mixer driver */ - -/* open the mixer device. */ - -static int vwsnd_mixer_open(struct inode *inode, struct file *file) -{ - vwsnd_dev_t *devc; - - DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); - - INC_USE_COUNT; - mutex_lock(&vwsnd_mutex); - for (devc = vwsnd_dev_list; devc; devc = devc->next_dev) - if (devc->mixer_minor == iminor(inode)) - break; - - if (devc == NULL) { - DEC_USE_COUNT; - mutex_unlock(&vwsnd_mutex); - return -ENODEV; - } - file->private_data = devc; - mutex_unlock(&vwsnd_mutex); - return 0; -} - -/* release (close) the mixer device. */ - -static int vwsnd_mixer_release(struct inode *inode, struct file *file) -{ - DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); - DEC_USE_COUNT; - return 0; -} - -/* mixer_read_ioctl handles all read ioctls on the mixer device. */ - -static int mixer_read_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg) -{ - int val = -1; - - DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg); - - switch (nr) { - case SOUND_MIXER_CAPS: - val = SOUND_CAP_EXCL_INPUT; - break; - - case SOUND_MIXER_DEVMASK: - val = (SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV); - break; - - case SOUND_MIXER_STEREODEVS: - val = (SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV); - break; - - case SOUND_MIXER_OUTMASK: - val = (SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_MIC | SOUND_MASK_CD); - break; - - case SOUND_MIXER_RECMASK: - val = (SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_MIC | SOUND_MASK_CD); - break; - - case SOUND_MIXER_PCM: - val = ad1843_get_gain(&devc->lith, &ad1843_gain_PCM); - break; - - case SOUND_MIXER_LINE: - val = ad1843_get_gain(&devc->lith, &ad1843_gain_LINE); - break; - - case SOUND_MIXER_MIC: - val = ad1843_get_gain(&devc->lith, &ad1843_gain_MIC); - break; - - case SOUND_MIXER_CD: - val = ad1843_get_gain(&devc->lith, &ad1843_gain_CD); - break; - - case SOUND_MIXER_RECLEV: - val = ad1843_get_gain(&devc->lith, &ad1843_gain_RECLEV); - break; - - case SOUND_MIXER_RECSRC: - val = ad1843_get_recsrc(&devc->lith); - break; - - case SOUND_MIXER_OUTSRC: - val = ad1843_get_outsrc(&devc->lith); - break; - - default: - return -EINVAL; - } - return put_user(val, (int __user *) arg); -} - -/* mixer_write_ioctl handles all write ioctls on the mixer device. */ - -static int mixer_write_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg) -{ - int val; - int err; - - DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg); - - err = get_user(val, (int __user *) arg); - if (err) - return -EFAULT; - switch (nr) { - case SOUND_MIXER_PCM: - val = ad1843_set_gain(&devc->lith, &ad1843_gain_PCM, val); - break; - - case SOUND_MIXER_LINE: - val = ad1843_set_gain(&devc->lith, &ad1843_gain_LINE, val); - break; - - case SOUND_MIXER_MIC: - val = ad1843_set_gain(&devc->lith, &ad1843_gain_MIC, val); - break; - - case SOUND_MIXER_CD: - val = ad1843_set_gain(&devc->lith, &ad1843_gain_CD, val); - break; - - case SOUND_MIXER_RECLEV: - val = ad1843_set_gain(&devc->lith, &ad1843_gain_RECLEV, val); - break; - - case SOUND_MIXER_RECSRC: - if (devc->rport.swbuf || devc->wport.swbuf) - return -EBUSY; /* can't change recsrc while running */ - val = ad1843_set_recsrc(&devc->lith, val); - break; - - case SOUND_MIXER_OUTSRC: - val = ad1843_set_outsrc(&devc->lith, val); - break; - - default: - return -EINVAL; - } - if (val < 0) - return val; - return put_user(val, (int __user *) arg); -} - -/* This is the ioctl entry to the mixer driver. */ - -static long vwsnd_mixer_ioctl(struct file *file, - unsigned int cmd, - unsigned long arg) -{ - vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; - const unsigned int nrmask = _IOC_NRMASK << _IOC_NRSHIFT; - const unsigned int nr = (cmd & nrmask) >> _IOC_NRSHIFT; - int retval; - - DBGEV("(devc=0x%p, cmd=0x%x, arg=0x%lx)\n", devc, cmd, arg); - - mutex_lock(&vwsnd_mutex); - mutex_lock(&devc->mix_mutex); - { - if ((cmd & ~nrmask) == MIXER_READ(0)) - retval = mixer_read_ioctl(devc, nr, (void __user *) arg); - else if ((cmd & ~nrmask) == MIXER_WRITE(0)) - retval = mixer_write_ioctl(devc, nr, (void __user *) arg); - else - retval = -EINVAL; - } - mutex_unlock(&devc->mix_mutex); - mutex_unlock(&vwsnd_mutex); - return retval; -} - -static const struct file_operations vwsnd_mixer_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .unlocked_ioctl = vwsnd_mixer_ioctl, - .open = vwsnd_mixer_open, - .release = vwsnd_mixer_release, -}; - -/*****************************************************************************/ -/* probe/attach/unload */ - -/* driver probe routine. Return nonzero if hardware is found. */ - -static int __init probe_vwsnd(struct address_info *hw_config) -{ - lithium_t lith; - int w; - unsigned long later; - - DBGEV("(hw_config=0x%p)\n", hw_config); - - /* XXX verify lithium present (to prevent crash on non-vw) */ - - if (li_create(&lith, hw_config->io_base) != 0) { - printk(KERN_WARNING "probe_vwsnd: can't map lithium\n"); - return 0; - } - later = jiffies + 2; - li_writel(&lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE); - do { - w = li_readl(&lith, LI_HOST_CONTROLLER); - } while (w == LI_HC_LINK_ENABLE && time_before(jiffies, later)); - - li_destroy(&lith); - - DBGPV("HC = 0x%04x\n", w); - - if ((w == LI_HC_LINK_ENABLE) || (w & LI_HC_LINK_CODEC)) { - - /* This may indicate a beta machine with no audio, - * or a future machine with different audio. - * On beta-release 320 w/ no audio, HC == 0x4000 */ - - printk(KERN_WARNING "probe_vwsnd: audio codec not found\n"); - return 0; - } - - if (w & LI_HC_LINK_FAILURE) { - printk(KERN_WARNING "probe_vwsnd: can't init audio codec\n"); - return 0; - } - - printk(KERN_INFO "vwsnd: lithium audio at mmio %#x irq %d\n", - hw_config->io_base, hw_config->irq); - - return 1; -} - -/* - * driver attach routine. Initialize driver data structures and - * initialize hardware. A new vwsnd_dev_t is allocated and put - * onto the global list, vwsnd_dev_list. - * - * Return +minor_dev on success, -errno on failure. - */ - -static int __init attach_vwsnd(struct address_info *hw_config) -{ - vwsnd_dev_t *devc = NULL; - int err = -ENOMEM; - - DBGEV("(hw_config=0x%p)\n", hw_config); - - devc = kmalloc(sizeof (vwsnd_dev_t), GFP_KERNEL); - if (devc == NULL) - goto fail0; - - err = li_create(&devc->lith, hw_config->io_base); - if (err) - goto fail1; - - init_waitqueue_head(&devc->open_wait); - - devc->rport.hwbuf_size = HWBUF_SIZE; - devc->rport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER); - if (!devc->rport.hwbuf_vaddr) - goto fail2; - devc->rport.hwbuf = (void *) devc->rport.hwbuf_vaddr; - devc->rport.hwbuf_paddr = virt_to_phys(devc->rport.hwbuf); - - /* - * Quote from the NT driver: - * - * // WARNING!!! HACK to setup output dma!!! - * // This is required because even on output there is some data - * // trickling into the input DMA channel. This is a bug in the - * // Lithium microcode. - * // --sde - * - * We set the input side's DMA base address here. It will remain - * valid until the driver is unloaded. - */ - - li_writel(&devc->lith, LI_COMM1_BASE, - devc->rport.hwbuf_paddr >> 8 | 1 << (37 - 8)); - - devc->wport.hwbuf_size = HWBUF_SIZE; - devc->wport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER); - if (!devc->wport.hwbuf_vaddr) - goto fail3; - devc->wport.hwbuf = (void *) devc->wport.hwbuf_vaddr; - devc->wport.hwbuf_paddr = virt_to_phys(devc->wport.hwbuf); - DBGP("wport hwbuf = 0x%p\n", devc->wport.hwbuf); - - DBGDO(shut_up++); - err = ad1843_init(&devc->lith); - DBGDO(shut_up--); - if (err) - goto fail4; - - /* install interrupt handler */ - - err = request_irq(hw_config->irq, vwsnd_audio_intr, 0, "vwsnd", devc); - if (err) - goto fail5; - - /* register this device's drivers. */ - - devc->audio_minor = register_sound_dsp(&vwsnd_audio_fops, -1); - if ((err = devc->audio_minor) < 0) { - DBGDO(printk(KERN_WARNING - "attach_vwsnd: register_sound_dsp error %d\n", - err)); - goto fail6; - } - devc->mixer_minor = register_sound_mixer(&vwsnd_mixer_fops, - devc->audio_minor >> 4); - if ((err = devc->mixer_minor) < 0) { - DBGDO(printk(KERN_WARNING - "attach_vwsnd: register_sound_mixer error %d\n", - err)); - goto fail7; - } - - /* Squirrel away device indices for unload routine. */ - - hw_config->slots[0] = devc->audio_minor; - - /* Initialize as much of *devc as possible */ - - mutex_init(&devc->open_mutex); - mutex_init(&devc->io_mutex); - mutex_init(&devc->mix_mutex); - devc->open_mode = 0; - spin_lock_init(&devc->rport.lock); - init_waitqueue_head(&devc->rport.queue); - devc->rport.swstate = SW_OFF; - devc->rport.hwstate = HW_STOPPED; - devc->rport.flags = 0; - devc->rport.swbuf = NULL; - spin_lock_init(&devc->wport.lock); - init_waitqueue_head(&devc->wport.queue); - devc->wport.swstate = SW_OFF; - devc->wport.hwstate = HW_STOPPED; - devc->wport.flags = 0; - devc->wport.swbuf = NULL; - - /* Success. Link us onto the local device list. */ - - devc->next_dev = vwsnd_dev_list; - vwsnd_dev_list = devc; - return devc->audio_minor; - - /* So many ways to fail. Undo what we did. */ - - fail7: - unregister_sound_dsp(devc->audio_minor); - fail6: - free_irq(hw_config->irq, devc); - fail5: - fail4: - free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER); - fail3: - free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER); - fail2: - li_destroy(&devc->lith); - fail1: - kfree(devc); - fail0: - return err; -} - -static int __exit unload_vwsnd(struct address_info *hw_config) -{ - vwsnd_dev_t *devc, **devcp; - - DBGE("()\n"); - - devcp = &vwsnd_dev_list; - while ((devc = *devcp)) { - if (devc->audio_minor == hw_config->slots[0]) { - *devcp = devc->next_dev; - break; - } - devcp = &devc->next_dev; - } - - if (!devc) - return -ENODEV; - - unregister_sound_mixer(devc->mixer_minor); - unregister_sound_dsp(devc->audio_minor); - free_irq(hw_config->irq, devc); - free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER); - free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER); - li_destroy(&devc->lith); - kfree(devc); - - return 0; -} - -/*****************************************************************************/ -/* initialization and loadable kernel module interface */ - -static struct address_info the_hw_config = { - 0xFF001000, /* lithium phys addr */ - CO_IRQ(CO_APIC_LI_AUDIO) /* irq */ -}; - -MODULE_DESCRIPTION("SGI Visual Workstation sound module"); -MODULE_AUTHOR("Bob Miller <kbob@sgi.com>"); -MODULE_LICENSE("GPL"); - -static int __init init_vwsnd(void) -{ - int err; - - DBGXV("\n"); - DBGXV("sound::vwsnd::init_module()\n"); - - if (!probe_vwsnd(&the_hw_config)) - return -ENODEV; - - err = attach_vwsnd(&the_hw_config); - if (err < 0) - return err; - return 0; -} - -static void __exit cleanup_vwsnd(void) -{ - DBGX("sound::vwsnd::cleanup_module()\n"); - - unload_vwsnd(&the_hw_config); -} - -module_init(init_vwsnd); -module_exit(cleanup_vwsnd); |