diff options
71 files changed, 603 insertions, 342 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 5903ecf6e89..a20069502f5 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -27,13 +27,13 @@ nand0: nand@40000000,0 { reg = <0x40000000 0x10000000 0xffffe800 0x200 >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; + atmel,nand-addr-offset = <21>; /* ale */ + atmel,nand-cmd-offset = <22>; /* cle */ nand-on-flash-bbt; nand-ecc-mode = "soft"; - gpios = <&pioC 13 0 - &pioC 14 0 - 0 + gpios = <&pioC 13 0 /* rdy */ + &pioC 14 0 /* nce */ + 0 /* cd */ >; partition@0 { ... diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 93180845ae1..cf006d40342 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -338,6 +338,7 @@ config ARCH_AT91 select HAVE_CLK select CLKDEV_LOOKUP select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 processors. diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 92f36627e7f..799ad1889b5 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -35,7 +35,7 @@ }; }; - memory@20000000 { + memory { reg = <0x20000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index ac0dc0031dd..7829a4d0cb2 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -37,8 +37,8 @@ usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 0 - &pioD 20 0 + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 >; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3d0c32fb218..9e6eb6ecea0 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -36,7 +36,7 @@ }; }; - memory@70000000 { + memory { reg = <0x70000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index c4c8ae4123d..a3633bd1311 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -17,7 +17,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; - memory@70000000 { + memory { reg = <0x70000000 0x4000000>; }; @@ -73,8 +73,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 0 - &pioD 3 0>; + atmel,vbus-gpio = <&pioD 1 1 + &pioD 3 1>; }; usb1: ehci@00800000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index c111001f254..70ab3a4e026 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -34,7 +34,7 @@ }; }; - memory@20000000 { + memory { reg = <0x20000000 0x10000000>; }; @@ -201,8 +201,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioD 5 0 + &pioD 4 0 0 >; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 67936f83c69..31e7be23703 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -8,7 +8,7 @@ */ / { - memory@20000000 { + memory { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 3b3c4e0fa79..7c2399c532e 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -16,7 +16,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory@20000000 { + memory { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 44f4a09ff37..05112380dc5 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -2,6 +2,7 @@ #define __ASM_BARRIER_H #ifndef __ASSEMBLY__ +#include <asm/outercache.h> #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); @@ -39,7 +40,6 @@ #ifdef CONFIG_ARCH_HAS_BARRIERS #include <mach/barriers.h> #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) -#include <asm/outercache.h> #define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dsb() #define wmb() mb() diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index df0ac0bb39a..9af5563dd3e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -119,7 +119,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #ifdef CONFIG_NEED_MACH_IO_H #include <mach/io.h> #else -#define __io(a) ({ (void)(a); __typesafe_io(0); }) +#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) #endif /* diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7e5651ee9f8..5652dde4bbe 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -598,6 +598,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 096da87dc00..4db961a9308 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 53688c46f95..fe99206de88 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ @@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 698479f1e19..6b008aee1df 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -127,12 +127,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } usbh_ehci_data = *data; @@ -785,6 +787,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index eda72e83037..fe4ae22e856 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + /* enable chip-select pin */ at91_set_gpio_output(cs_pin, 1); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index b6831eeb7b7..13c8cae6046 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 66f0ddf4b2a..2ffe50f3a9e 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -74,6 +74,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, + .vbus_pin_active_low = {1, 1}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index e1bea73e6b3..c88e908ddd8 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -71,6 +71,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_hs_data = { .ports = 2, .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3}, + .vbus_pin_active_low = {1, 1}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 544a5d5ce41..49a821192c6 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 struct at91_usbh_data { - u8 ports; /* number of ports on root hub */ - int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_active_low[2]; + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ u8 overcurrent_supported; - int overcurrent_pin[2]; - u8 overcurrent_status[2]; - u8 overcurrent_changed[2]; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h new file mode 100644 index 00000000000..2d9ca045574 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-at91/include/mach/io.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xFFFFFFFF +#define __io(a) __typesafe_io(a) + +#endif diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index e6cc50e94a5..8614aab47cc 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -583,10 +583,11 @@ core_initcall(exynos_core_init); #ifdef CONFIG_CACHE_L2X0 static int __init exynos4_l2x0_cache_init(void) { + int ret; + if (soc_is_exynos5250()) return 0; - int ret; ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); if (!ret) { l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 3983abee426..69aaa450320 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -35,8 +35,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 exynos4210_pdma0_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S index 6c857ff0b5d..e0c86ea475e 100644 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S @@ -21,10 +21,9 @@ */ .macro addruart, rp, rv, tmp - mov \rp, #0x10000000 - ldr \rp, [\rp, #0x0] - and \rp, \rp, #0xf00000 - teq \rp, #0x500000 @@ EXYNOS5 + mrc p15, 0, \tmp, c0, c0, 0 + and \tmp, \tmp, #0xf0 + teq \tmp, #0xf0 @@ A15 ldreq \rp, =EXYNOS5_PA_UART movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 ldr \rv, =S3C_VA_UART diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h index 493f4f365dd..2979995d5a6 100644 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ b/arch/arm/mach-exynos/include/mach/uncompress.h @@ -20,9 +20,24 @@ volatile u8 *uart_base; #include <plat/uncompress.h> +static unsigned int __raw_readl(unsigned int ptr) +{ + return *((volatile unsigned int *)ptr); +} + static void arch_detect_cpu(void) { - if (machine_is_smdk5250()) + u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID); + + /* + * product_id is bits 31:12 + * bits 23:20 describe the exynosX family + * + */ + chip_id >>= 20; + chip_id &= 0xf; + + if (chip_id == 0x5) uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); else uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index b9a95ed7555..98e04f5a87d 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -662,6 +662,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "dma", dma_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "brom", brom_clk) + _REGISTER_CLOCK(NULL, "emma", emma_clk) _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 1e279af656a..e56c1a83eee 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -483,7 +483,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) - _REGISTER_CLOCK(NULL, "csi", csi_clk) + _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 27bc27e6ea4..c650145d164 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -38,6 +38,8 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -479,6 +481,11 @@ static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + /* * Perform board specific initializations */ @@ -489,6 +496,8 @@ static void __init armadillo5x0_init(void) mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index fc78e8071cd..15a26e90826 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -24,6 +24,8 @@ #include <linux/serial_8250.h> #include <linux/smsc911x.h> #include <linux/types.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -166,6 +168,11 @@ static struct platform_device kzm_smsc9118_device = { }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static int __init kzm_init_smsc9118(void) { /* @@ -175,6 +182,8 @@ static int __init kzm_init_smsc9118(void) gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_device_register(&kzm_smsc9118_device); } #else diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 02401bbd6d5..83714b0cc29 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -34,6 +34,8 @@ #include <linux/mfd/mc13783.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -242,6 +244,11 @@ static struct platform_device *devices[] __initdata = { static int mx31lilly_baseboard; core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static void __init mx31lilly_board_init(void) { imx31_soc_init(); @@ -280,6 +287,8 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_dev, 1); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ef80751712e..0abef5f13df 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -29,6 +29,8 @@ #include <linux/usb/ulpi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -226,6 +228,11 @@ void __init mx31lite_map_io(void) static int mx31lite_baseboard; core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static void __init mx31lite_init(void) { int ret; @@ -259,6 +266,8 @@ static void __init mx31lite_init(void) if (usbh2_pdata.otg) imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index e14291d89e4..6ae51c6b95b 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -97,7 +97,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = { static int lcd_power_gpio = -ENXIO; static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, - void *data) + const void *data) { return !strcmp(chip->label, data); } diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 753f4fc9ec0..05641980dc5 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -23,6 +23,8 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/smsc911x.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <mach/common.h> #include <mach/hardware.h> @@ -214,6 +216,11 @@ static int weim_cs_config(void) return 0; } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + void __init imx53_ard_common_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, @@ -232,6 +239,7 @@ static void __init mx53_ard_board_init(void) imx53_ard_common_init(); mx53_ard_io_init(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h new file mode 100644 index 00000000000..ce4f8005b26 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -0,0 +1,45 @@ +/* + * arch/arm/mach-omap1/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) + +#endif diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 41b0a2fe0b0..909a8b91b56 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -26,6 +26,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/mmc/host.h> @@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; +static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init cm_t35_init_ethernet(void) { + regulator_register_fixed(0, cm_t35_smsc911x_supplies, + ARRAY_SIZE(cm_t35_smsc911x_supplies)); + regulator_register_fixed(1, sb_t35_smsc911x_supplies, + ARRAY_SIZE(sb_t35_smsc911x_supplies)); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e558800adfd..930c0d38043 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void) static inline void __init igep_wlan_bt_init(void) { } #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init igep_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d50a562adfa..1b6049567ab 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,6 +22,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/io.h> @@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = { }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap_ldp_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); ldp_init_smsc911x(); omap_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4c90f078abe..49df12735b4 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3evm_init_smsc911x(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) @@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void) #endif } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); if (cpu_is_omap3630()) omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4a7d8c8a75d..9b3c141ff51 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3logic_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3torpedo_fix_pbias_voltage(); omap3logic_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 64100438079..4dffc95bddd 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> @@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3stalker_init_eth(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); gpmc_smsc911x_init(&smsc911x_cfg); } @@ -419,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_stalker_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 668533e2a37..33aa3910b09 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = { { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init overo_init(void) { int ret; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_hsmmc_init(mmc); overo_i2c_init(); diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1e8540eabde..f64f4417306 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,6 +14,9 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> + #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> @@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = { &zoom_debugboard_serial_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + int __init zoom_debugboard_init(void) { if (!omap_zoom_debugboard_detect()) return 0; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); zoom_init_smsc911x(); zoom_init_quaduart(); return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 480fb8f09ae..f4a626f7c79 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -747,7 +747,7 @@ static struct clk dpll4_m3_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel_mask = OMAP3630_CLKSEL_TV_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -832,7 +832,7 @@ static struct clk dpll4_m4_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -859,7 +859,7 @@ static struct clk dpll4_m5_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel_mask = OMAP3630_CLKSEL_CAM_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .set_rate = &omap2_clksel_set_rate, @@ -886,7 +886,7 @@ static struct clk dpll4_m6_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel_mask = OMAP3630_DIV_DPLL4_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1394,6 +1394,7 @@ static struct clk cpefuse_fck = { .name = "cpefuse_fck", .ops = &clkops_omap2_dflt, .parent = &sys_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, .recalc = &followparent_recalc, @@ -1403,6 +1404,7 @@ static struct clk ts_fck = { .name = "ts_fck", .ops = &clkops_omap2_dflt, .parent = &omap_32k_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, .recalc = &followparent_recalc, @@ -1412,6 +1414,7 @@ static struct clk usbtll_fck = { .name = "usbtll_fck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll5_m2_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .recalc = &followparent_recalc, @@ -1617,6 +1620,7 @@ static struct clk fshostusb_fck = { .name = "fshostusb_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, .recalc = &followparent_recalc, @@ -2043,6 +2047,7 @@ static struct clk omapctrl_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2094,6 +2099,7 @@ static struct clk usb_l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, .clksel = usb_l4_clksel, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3467,8 +3473,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX), - CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX), + CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index c03c1108468..fa6ea65ad44 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -957,8 +957,8 @@ static struct dpll_data dpll_usb_dd = { .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, - .mult_mask = OMAP4430_DPLL_MULT_MASK, - .div1_mask = OMAP4430_DPLL_DIV_MASK, + .mult_mask = OMAP4430_DPLL_MULT_USB_MASK, + .div1_mask = OMAP4430_DPLL_DIV_0_7_MASK, .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, @@ -978,6 +978,7 @@ static struct clk dpll_usb_ck = { .recalc = &omap3_dpll_recalc, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "l3_init_clkdm", }; static struct clk dpll_usb_clkdcoldo_ck = { diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 9299ac291d2..bd7ed13515c 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -390,7 +390,7 @@ static struct clockdomain emu_sys_44xx_clkdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .cm_inst = OMAP4430_PRM_EMU_CM_INST, .clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP, }; static struct clockdomain l3_dma_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 5e5880d6d09..b6c77be3e8f 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,15 +19,11 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> -static struct omap_smsc911x_platform_data *gpmc_cfg; - static struct resource gpmc_smsc911x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_16BIT, -}; - -static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -/* Generic regulator definition to satisfy smsc911x */ -static struct regulator_init_data gpmc_smsc911x_reg_init_data = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), - .consumer_supplies = gpmc_smsc911x_supply, -}; - -static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { - .supply_name = "gpmc_smsc911x", - .microvolts = 3300000, - .gpio = -EINVAL, - .startup_delay = 0, - .enable_high = 0, - .enabled_at_boot = 1, - .init_data = &gpmc_smsc911x_reg_init_data, -}; - -/* - * Platform device id of 42 is a temporary fix to avoid conflicts - * with other reg-fixed-voltage devices. The real fix should - * involve the driver core providing a way of dynamically - * assigning a unique id on registration for platform devices - * in the same name space. - */ -static struct platform_device gpmc_smsc911x_regulator = { - .name = "reg-fixed-voltage", - .id = 42, - .dev = { - .platform_data = &gpmc_smsc911x_fixed_reg_data, - }, }; /* @@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = { * assume that pin multiplexing is done in the board-*.c file, * or in the bootloader. */ -void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) +void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg) { struct platform_device *pdev; unsigned long cs_mem_base; int ret; - gpmc_cfg = board_data; - - if (!gpmc_cfg->id) { - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", - ret); - return; - } - } - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; @@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (gpmc_cfg->flags) - gpmc_smsc911x_config.flags = gpmc_cfg->flags; + gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT; pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 100db6217f3..b0268eaffe1 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -506,6 +506,13 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; + /* + * erratum 2.1.1.128 doesn't apply if board has + * a transceiver is attached + */ + if (hsmmcinfo->transceiver) + mmc_data->controller_flags &= + ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ; } pdev = platform_device_alloc(name, ctrl_nr - 1); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index eba6cd3816f..2c27fdb61e6 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1395,7 +1395,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v; + u32 v, softrst_mask; int c = 0; int ret = 0; @@ -1427,11 +1427,13 @@ static int _ocp_softreset(struct omap_hwmod *oh) oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) + else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); omap_test_timeout(!(omap_hwmod_read(oh, oh->class->sysc->sysc_offs) - & SYSC_TYPE2_SOFTRESET_MASK), + & softrst_mask), MAX_MODULE_SOFTRESET_WAIT, c); + } if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", @@ -1477,6 +1479,11 @@ static int _reset(struct omap_hwmod *oh) ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh); + if (oh->class->sysc) { + _update_sysc_cache(oh); + _enable_sysc(oh); + } + return ret; } @@ -1786,20 +1793,9 @@ static int _setup(struct omap_hwmod *oh, void *data) return 0; } - if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + if (!(oh->flags & HWMOD_INIT_NO_RESET)) _reset(oh); - /* - * OCP_SYSCONFIG bits need to be reprogrammed after a softreset. - * The _enable() function should be split to - * avoid the rewrite of the OCP_SYSCONFIG register. - */ - if (oh->class->sysc) { - _update_sysc_cache(oh); - _enable_sysc(oh); - } - } - postsetup_state = oh->_postsetup_state; if (postsetup_state == _HWMOD_STATE_UNKNOWN) postsetup_state = _HWMOD_STATE_ENABLED; @@ -1907,20 +1903,10 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - u32 v; - int ret; - - if (!oh || !(oh->_sysc_cache)) + if (!oh) return -EINVAL; - v = oh->_sysc_cache; - ret = _set_softreset(oh, &v); - if (ret) - goto error; - _write_sysconfig(v, oh); - -error: - return ret; + return _ocp_softreset(oh); } /** @@ -2463,26 +2449,28 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, * @oh: struct omap_hwmod * * * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM. Eventually this should sets PRCM wakeup - * registers to cause the PRCM to receive wakeup events from the - * module. Does not set any wakeup routing registers beyond this - * point - if the module is to wake up any other module or subsystem, - * that must be set separately. Called by omap_device code. Returns - * -EINVAL on error or 0 upon success. + * send wakeups to the PRCM, and enable I/O ring wakeup events for + * this IP block if it has dynamic mux entries. Eventually this + * should set PRCM wakeup registers to cause the PRCM to receive + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _enable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, true); spin_unlock_irqrestore(&oh->_lock, flags); @@ -2494,26 +2482,28 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM. Eventually this should clear - * PRCM wakeup registers to cause the PRCM to ignore wakeup events - * from the module. Does not set any wakeup routing registers beyond - * this point - if the module is to wake up any other module or - * subsystem, that must be set separately. Called by omap_device - * code. Returns -EINVAL on error or 0 upon success. + * from sending wakeups to the PRCM, and disable I/O ring wakeup + * events for this IP block if it has dynamic mux entries. Eventually + * this should clear PRCM wakeup registers to cause the PRCM to ignore + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _disable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, false); spin_unlock_irqrestore(&oh->_lock, flags); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 08daa5e0eb5..cc9bd106a85 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2996,6 +2996,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { &omap44xx_l4_abe__mcbsp1_dma, }; +static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap44xx_mcbsp_hwmod_class, @@ -3012,6 +3017,8 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { }, .slaves = omap44xx_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), + .opt_clks = mcbsp1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), }; /* mcbsp2 */ @@ -3071,6 +3078,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { &omap44xx_l4_abe__mcbsp2_dma, }; +static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap44xx_mcbsp_hwmod_class, @@ -3087,6 +3099,8 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { }, .slaves = omap44xx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), + .opt_clks = mcbsp2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), }; /* mcbsp3 */ @@ -3146,6 +3160,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { &omap44xx_l4_abe__mcbsp3_dma, }; +static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap44xx_mcbsp_hwmod_class, @@ -3162,6 +3181,8 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { }, .slaves = omap44xx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), + .opt_clks = mcbsp3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), }; /* mcbsp4 */ @@ -3200,6 +3221,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { &omap44xx_l4_per__mcbsp4, }; +static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap44xx_mcbsp_hwmod_class, @@ -3216,6 +3242,8 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { }, .slaves = omap44xx_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), + .opt_clks = mcbsp4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 9262a6b4770..de6d4645174 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, } oh = omap_hwmod_lookup(opp_def->hwmod_name); if (!oh || !oh->od) { - pr_warn("%s: no hwmod or odev for %s, [%d] " + pr_debug("%s: no hwmod or odev for %s, [%d] " "cannot add OPPs.\n", __func__, opp_def->hwmod_name, i); - return -EINVAL; + continue; } dev = &oh->od->pdev->dev; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 238defc6f6d..703bd109925 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -153,8 +153,7 @@ static void omap3_save_secure_ram_context(void) pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { - printk(KERN_ERR "save_secure_sram() returns %08x\n", - ret); + pr_err("save_secure_sram() returns %08x\n", ret); while (1) ; } @@ -289,7 +288,7 @@ void omap_sram_idle(void) break; default: /* Invalid state */ - printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + pr_err("Invalid mpu state in sram_idle\n"); return; } @@ -439,18 +438,17 @@ restore: list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { - printk(KERN_INFO "Powerdomain (%s) didn't enter " - "target state %d\n", + pr_info("Powerdomain (%s) didn't enter " + "target state %d\n", pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) - printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + pr_err("Could not enter target state in pm_suspend\n"); else - printk(KERN_INFO "Successfully put all powerdomains " - "to target state\n"); + pr_info("Successfully put all powerdomains to target state\n"); return ret; } @@ -734,21 +732,22 @@ static int __init omap3_pm_init(void) if (ret) { pr_err("pm: Failed to request pm_io irq\n"); - goto err1; + goto err2; } ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { - printk(KERN_ERR "Failed to setup powerdomains\n"); - goto err2; + pr_err("Failed to setup powerdomains\n"); + goto err3; } (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { - printk(KERN_ERR "Failed to get mpu_pwrdm\n"); - goto err2; + pr_err("Failed to get mpu_pwrdm\n"); + ret = -EINVAL; + goto err3; } neon_pwrdm = pwrdm_lookup("neon_pwrdm"); @@ -781,8 +780,8 @@ static int __init omap3_pm_init(void) omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); if (!omap3_secure_ram_storage) - printk(KERN_ERR "Memory allocation failed when" - "allocating for secure sram context\n"); + pr_err("Memory allocation failed when " + "allocating for secure sram context\n"); local_irq_disable(); local_fiq_disable(); @@ -796,14 +795,17 @@ static int __init omap3_pm_init(void) } omap3_save_scratchpad_contents(); -err1: return ret; -err2: - free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + +err3: list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { list_del(&pwrst->node); kfree(pwrst); } + free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init); +err2: + free_irq(omap_prcm_event_to_irq("wkup"), NULL); +err1: return ret; } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 9ccaadc2cf0..88562535242 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -144,7 +144,7 @@ static void omap_default_idle(void) static int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; if (!cpu_is_omap44xx()) @@ -168,14 +168,19 @@ static int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); + l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) goto err2; @@ -183,6 +188,7 @@ static int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8a18d1bd61c..96ad3dbeac3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -972,7 +972,13 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm) int pwrdm_state_switch(struct powerdomain *pwrdm) { - return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + int ret; + + ret = pwrdm_wait_transition(pwrdm); + if (!ret) + ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + + return ret; } int pwrdm_clkdm_state_switch(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index eac623c7c3d..f106d21ff58 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) u32 mask, st; /* XXX read mask from RAM? */ - mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs); - st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs); + mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + irqen_offs); + st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs); return mask & st; } @@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events) */ void omap44xx_prm_ocp_barrier(void) { - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void) void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_OFFSET); saved_mask[1] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); /* OCP barrier */ - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) */ void omap44xx_prm_restore_irqen(u32 *saved_mask) { - omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 873b51d494e..d28f848897d 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -290,7 +290,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) goto err; } - for (i = 0; i <= irq_setup->nr_regs; i++) { + for (i = 0; i < irq_setup->nr_regs; i++) { gc = irq_alloc_generic_chip("PRCM", 1, irq_setup->base_irq + i * 32, prm_base, handle_level_irq); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index f51348dafaf..dde8a11f47d 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 109ccd2a888..fe2d1f80ef5 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -113,6 +113,7 @@ config MACH_ARMCORE select IWMMXT select PXA25x select MIGHT_HAVE_PCI + select NEED_MACH_IO_H if PCI config MACH_EM_X270 bool "CompuLab EM-x270 platform" diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h new file mode 100644 index 00000000000..cd78b7fe356 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/io.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-pxa/include/mach/io.h + * + * Copied from asm/arch/sa1100/io.h + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) + +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h new file mode 100644 index 00000000000..c2f596e7bc2 --- /dev/null +++ b/arch/arm/mach-s3c24xx/common.h @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S3C24XX SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H +#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ + +void s3c2410_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); + +#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 48885b7efd6..c7f418b0cde 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -313,6 +313,10 @@ static struct sa1100fb_mach_info collie_lcd_info = { .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + +#ifdef CONFIG_BACKLIGHT_LOCOMO + .lcd_power = locomolcd_power +#endif }; static void __init collie_init(void) diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 52acda7061b..f33679d2d3e 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/collie.h * - * This file contains the hardware specific definitions for Assabet + * This file contains the hardware specific definitions for Collie * Only include this file from SA1100-specific files. * * ChangeLog: @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H +extern void locomolcd_power(int on); #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) #define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0) diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index a6e23f46452..d2268be8c34 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -190,7 +190,7 @@ static struct resource pre_mem = { .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, }; -static int __init pci_versatile_setup_resources(struct list_head *resources) +static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) { int ret = 0; @@ -218,9 +218,9 @@ static int __init pci_versatile_setup_resources(struct list_head *resources) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(resources, &io_mem, sys->io_offset); - pci_add_resource_offset(resources, &non_mem, sys->mem_offset); - pci_add_resource_offset(resources, &pre_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); goto out; @@ -249,7 +249,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; - ret = pci_versatile_setup_resources(&sys->resources); + ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); goto out; diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c index d1e31fa1b0c..5cac2c540f4 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -80,7 +80,7 @@ static struct smsc911x_platform_config smsc911x_config = { static struct platform_device smsc_lan9217_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_config, }, diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ce1e9b96ba1..ad95c7a5d00 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP1 select IRQ_DOMAIN select HAVE_IDE select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H if PCCARD help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 56b6f8b7053..8506cbb7fea 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -441,6 +441,8 @@ static int __init clk_disable_unused(void) return 0; pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); list_for_each_entry(ck, &clocks, node) { if (ck->ops == &clkops_null) continue; @@ -448,10 +450,9 @@ static int __init clk_disable_unused(void) if (ck->usecount > 0 || !ck->enable_reg) continue; - spin_lock_irqsave(&clockfw_lock, flags); arch_clock->clk_disable_unused(ck); - spin_unlock_irqrestore(&clockfw_lock, flags); } + spin_unlock_irqrestore(&clockfw_lock, flags); return 0; } diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 9e8e63d52aa..8070145ccb9 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -47,17 +47,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; * with the original PRCM protocol defined for OMAP2420 */ #define SYSC_TYPE1_MIDLEMODE_SHIFT 12 -#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT) +#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 -#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT) +#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) #define SYSC_TYPE1_SIDLEMODE_SHIFT 3 -#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT) +#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) #define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 -#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) +#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) #define SYSC_TYPE1_SOFTRESET_SHIFT 1 -#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) +#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) #define SYSC_TYPE1_AUTOIDLE_SHIFT 0 -#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT) +#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) /* * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 32d790dd818..ffbb4468591 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -51,9 +51,6 @@ config ARM_S5PV210_CPUFREQ config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" depends on ARCH_EXYNOS - select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210 - select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412) - select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250 default y help This adds the CPUFreq driver common part for Samsung @@ -62,20 +59,19 @@ config ARM_EXYNOS_CPUFREQ If in doubt, say N. config ARM_EXYNOS4210_CPUFREQ - bool "Samsung EXYNOS4210" - depends on ARCH_EXYNOS + def_bool CPU_EXYNOS4210 help This adds the CPUFreq driver for Samsung EXYNOS4210 SoC (S5PV310 or S5PC210). config ARM_EXYNOS4X12_CPUFREQ - bool "Samsung EXYNOS4X12" + def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412) help This adds the CPUFreq driver for Samsung EXYNOS4X12 SoC (EXYNOS4212 or EXYNOS4412). config ARM_EXYNOS5250_CPUFREQ - bool "Samsung EXYNOS5250" + def_bool SOC_EXYNOS5250 help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 32de6707e3c..12f349b3830 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -22,7 +22,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/gpio.h> -#include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/module.h> #include <linux/irqdomain.h> @@ -37,7 +37,8 @@ #define GPIO_PORT(x) (((x) >> 3) & 0x3) #define GPIO_BIT(x) ((x) & 0x7) -#define GPIO_REG(x) (GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4) +#define GPIO_REG(x) (GPIO_BANK(x) * tegra_gpio_bank_stride + \ + GPIO_PORT(x) * 4) #define GPIO_CNF(x) (GPIO_REG(x) + 0x00) #define GPIO_OE(x) (GPIO_REG(x) + 0x10) @@ -48,12 +49,12 @@ #define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) #define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) +#define GPIO_MSK_CNF(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x00) +#define GPIO_MSK_OE(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x10) +#define GPIO_MSK_OUT(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0X20) +#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x40) +#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x50) +#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x60) #define GPIO_INT_LVL_MASK 0x010101 #define GPIO_INT_LVL_EDGE_RISING 0x000101 @@ -78,6 +79,8 @@ struct tegra_gpio_bank { static struct irq_domain *irq_domain; static void __iomem *regs; static u32 tegra_gpio_bank_count; +static u32 tegra_gpio_bank_stride; +static u32 tegra_gpio_upper_offset; static struct tegra_gpio_bank *tegra_gpio_banks; static inline void tegra_gpio_writel(u32 val, u32 reg) @@ -333,6 +336,26 @@ static struct irq_chip tegra_gpio_irq_chip = { #endif }; +struct tegra_gpio_soc_config { + u32 bank_stride; + u32 upper_offset; +}; + +static struct tegra_gpio_soc_config tegra20_gpio_config = { + .bank_stride = 0x80, + .upper_offset = 0x800, +}; + +static struct tegra_gpio_soc_config tegra30_gpio_config = { + .bank_stride = 0x100, + .upper_offset = 0x80, +}; + +static struct of_device_id tegra_gpio_of_match[] __devinitdata = { + { .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config }, + { .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config }, + { }, +}; /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. @@ -341,6 +364,8 @@ static struct lock_class_key gpio_lock_class; static int __devinit tegra_gpio_probe(struct platform_device *pdev) { + const struct of_device_id *match; + struct tegra_gpio_soc_config *config; int irq_base; struct resource *res; struct tegra_gpio_bank *bank; @@ -348,6 +373,15 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) int i; int j; + match = of_match_device(tegra_gpio_of_match, &pdev->dev); + if (match) + config = (struct tegra_gpio_soc_config *)match->data; + else + config = &tegra20_gpio_config; + + tegra_gpio_bank_stride = config->bank_stride; + tegra_gpio_upper_offset = config->upper_offset; + for (;;) { res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count); if (!res) @@ -402,7 +436,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) return -ENODEV; } - for (i = 0; i < 7; i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio)); @@ -441,11 +475,6 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) return 0; } -static struct of_device_id tegra_gpio_of_match[] __devinitdata = { - { .compatible = "nvidia,tegra20-gpio", }, - { }, -}; - static struct platform_driver tegra_gpio_driver = { .driver = { .name = "tegra-gpio", @@ -485,7 +514,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) int i; int j; - for (i = 0; i < 7; i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); seq_printf(s, diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 19f318ababa..cf14c95a670 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/of_platform.h> /* interface and function clocks */ diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index db8963f5fbc..09f597ad6e0 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -27,6 +27,10 @@ #error "CONFIG_ARCH_AT91 must be defined." #endif +#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) +#define at91_for_each_port(index) \ + for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++) + /* interface and function clocks; sometimes also an AHB clock */ static struct clk *iclk, *fclk, *hclk; static int clocked; @@ -240,26 +244,26 @@ ohci_at91_start (struct usb_hcd *hcd) static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable) { - if (port < 0 || port >= 2) + if (!valid_port(port)) return; if (!gpio_is_valid(pdata->vbus_pin[port])) return; gpio_set_value(pdata->vbus_pin[port], - !pdata->vbus_pin_active_low[port] ^ enable); + pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) { - if (port < 0 || port >= 2) + if (!valid_port(port)) return -EINVAL; if (!gpio_is_valid(pdata->vbus_pin[port])) return -EINVAL; return gpio_get_value(pdata->vbus_pin[port]) ^ - !pdata->vbus_pin_active_low[port]; + pdata->vbus_pin_active_low[port]; } /* @@ -271,9 +275,9 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) int length = ohci_hub_status_data(hcd, buf); int port; - for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { + at91_for_each_port(port) { if (pdata->overcurrent_changed[port]) { - if (! length) + if (!length) length = 1; buf[0] |= 1 << (port + 1); } @@ -297,11 +301,17 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", hcd, typeReq, wValue, wIndex, buf, wLength); + wIndex--; + switch (typeReq) { case SetPortFeature: if (wValue == USB_PORT_FEAT_POWER) { dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); - ohci_at91_usb_set_power(pdata, wIndex - 1, 1); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 1); + ret = 0; + } + goto out; } break; @@ -312,9 +322,9 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: C_OVER_CURRENT\n"); - if (wIndex == 1 || wIndex == 2) { - pdata->overcurrent_changed[wIndex-1] = 0; - pdata->overcurrent_status[wIndex-1] = 0; + if (valid_port(wIndex)) { + pdata->overcurrent_changed[wIndex] = 0; + pdata->overcurrent_status[wIndex] = 0; } goto out; @@ -323,9 +333,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: OVER_CURRENT\n"); - if (wIndex == 1 || wIndex == 2) { - pdata->overcurrent_status[wIndex-1] = 0; - } + if (valid_port(wIndex)) + pdata->overcurrent_status[wIndex] = 0; goto out; @@ -333,15 +342,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: POWER\n"); - if (wIndex == 1 || wIndex == 2) { - ohci_at91_usb_set_power(pdata, wIndex - 1, 0); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 0); return 0; } } break; } - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); if (ret) goto out; @@ -377,18 +386,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); - if (wIndex == 1 || wIndex == 2) { - if (! ohci_at91_usb_get_power(pdata, wIndex-1)) { + if (valid_port(wIndex)) { + if (!ohci_at91_usb_get_power(pdata, wIndex)) *data &= ~cpu_to_le32(RH_PS_PPS); - } - if (pdata->overcurrent_changed[wIndex-1]) { + if (pdata->overcurrent_changed[wIndex]) *data |= cpu_to_le32(RH_PS_OCIC); - } - if (pdata->overcurrent_status[wIndex-1]) { + if (pdata->overcurrent_status[wIndex]) *data |= cpu_to_le32(RH_PS_POCI); - } } } @@ -450,14 +456,14 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ - for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { + at91_for_each_port(port) { if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } } - if (port == ARRAY_SIZE(pdata->overcurrent_pin)) { + if (port == AT91_MAX_USBH_PORTS) { dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n"); return IRQ_HANDLED; } @@ -467,7 +473,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* When notified of an over-current situation, disable power on the corresponding port, and mark this port in over-current. */ - if (! val) { + if (!val) { ohci_at91_usb_set_power(pdata, port, 0); pdata->overcurrent_status[port] = 1; pdata->overcurrent_changed[port] = 1; @@ -492,7 +498,7 @@ static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); static int __devinit ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int i, ret, gpio; + int i, gpio; enum of_gpio_flags flags; struct at91_usbh_data *pdata; u32 ports; @@ -514,48 +520,17 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) if (!of_property_read_u32(np, "num-ports", &ports)) pdata->ports = ports; - for (i = 0; i < 2; i++) { + at91_for_each_port(i) { gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags); pdata->vbus_pin[i] = gpio; if (!gpio_is_valid(gpio)) continue; pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; - ret = gpio_request(gpio, "ohci_vbus"); - if (ret) { - dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio); - continue; - } - ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1); - if (ret) - dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d", - !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio); } - for (i = 0; i < 2; i++) { - gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); - pdata->overcurrent_pin[i] = gpio; - if (!gpio_is_valid(gpio)) - continue; - ret = gpio_request(gpio, "ohci_overcurrent"); - if (ret) { - dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio); - continue; - } - - ret = gpio_direction_input(gpio); - if (ret) { - dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio); - continue; - } - - ret = request_irq(gpio_to_irq(gpio), - ohci_hcd_at91_overcurrent_irq, - IRQF_SHARED, "ohci_overcurrent", pdev); - if (ret) { - gpio_free(gpio); - dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); - } - } + at91_for_each_port(i) + pdata->overcurrent_pin[i] = + of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); pdev->dev.platform_data = pdata; @@ -574,35 +549,69 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct at91_usbh_data *pdata; int i; + int gpio; + int ret; - i = ohci_at91_of_init(pdev); - - if (i) - return i; + ret = ohci_at91_of_init(pdev); + if (ret) + return ret; pdata = pdev->dev.platform_data; if (pdata) { - for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; - gpio_request(pdata->vbus_pin[i], "ohci_vbus"); + gpio = pdata->vbus_pin[i]; + + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_err(&pdev->dev, + "can't request vbus gpio %d\n", gpio); + continue; + } + ret = gpio_direction_output(gpio, + !pdata->vbus_pin_active_low[i]); + if (ret) { + dev_err(&pdev->dev, + "can't put vbus gpio %d as output %d\n", + gpio, !pdata->vbus_pin_active_low[i]); + gpio_free(gpio); + continue; + } + ohci_at91_usb_set_power(pdata, i, 1); } - for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { - int ret; - + at91_for_each_port(i) { if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; - gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent"); + gpio = pdata->overcurrent_pin[i]; + + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, + "can't request overcurrent gpio %d\n", + gpio); + continue; + } + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, + "can't configure overcurrent gpio %d as input\n", + gpio); + gpio_free(gpio); + continue; + } - ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]), + ret = request_irq(gpio_to_irq(gpio), ohci_hcd_at91_overcurrent_irq, IRQF_SHARED, "ohci_overcurrent", pdev); if (ret) { - gpio_free(pdata->overcurrent_pin[i]); - dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); + gpio_free(gpio); + dev_err(&pdev->dev, + "can't get gpio IRQ for overcurrent\n"); } } } @@ -617,14 +626,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; ohci_at91_usb_set_power(pdata, i, 0); gpio_free(pdata->vbus_pin[i]); } - for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev); diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index be20b5cbe26..3a6d5419e3e 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -229,14 +229,7 @@ static struct locomo_driver poodle_lcd_driver = { static int __init locomolcd_init(void) { - int ret = locomo_driver_register(&poodle_lcd_driver); - if (ret) - return ret; - -#ifdef CONFIG_SA1100_COLLIE - sa1100fb_lcd_power = locomolcd_power; -#endif - return 0; + return locomo_driver_register(&poodle_lcd_driver); } static void __exit locomolcd_exit(void) |