diff options
94 files changed, 5467 insertions, 2155 deletions
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS index 888ae7b83ae..a564ceea9e9 100644 --- a/Documentation/arm/OMAP/DSS +++ b/Documentation/arm/OMAP/DSS @@ -47,6 +47,51 @@ flexible way to enable non-common multi-display configuration. In addition to modelling the hardware overlays, omapdss supports virtual overlays and overlay managers. These can be used when updating a display with CPU or system DMA. +omapdss driver support for audio +-------------------------------- +There exist several display technologies and standards that support audio as +well. Hence, it is relevant to update the DSS device driver to provide an audio +interface that may be used by an audio driver or any other driver interested in +the functionality. + +The audio_enable function is intended to prepare the relevant +IP for playback (e.g., enabling an audio FIFO, taking in/out of reset +some IP, enabling companion chips, etc). It is intended to be called before +audio_start. The audio_disable function performs the reverse operation and is +intended to be called after audio_stop. + +While a given DSS device driver may support audio, it is possible that for +certain configurations audio is not supported (e.g., an HDMI display using a +VESA video timing). The audio_supported function is intended to query whether +the current configuration of the display supports audio. + +The audio_config function is intended to configure all the relevant audio +parameters of the display. In order to make the function independent of any +specific DSS device driver, a struct omap_dss_audio is defined. Its purpose +is to contain all the required parameters for audio configuration. At the +moment, such structure contains pointers to IEC-60958 channel status word +and CEA-861 audio infoframe structures. This should be enough to support +HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958. + +The audio_enable/disable, audio_config and audio_supported functions could be +implemented as functions that may sleep. Hence, they should not be called +while holding a spinlock or a readlock. + +The audio_start/audio_stop function is intended to effectively start/stop audio +playback after the configuration has taken place. These functions are designed +to be used in an atomic context. Hence, audio_start should return quickly and be +called only after all the needed resources for audio playback (audio FIFOs, +DMA channels, companion chips, etc) have been enabled to begin data transfers. +audio_stop is designed to only stop the audio transfers. The resources used +for playback are released using audio_disable. + +The enum omap_dss_audio_state may be used to help the implementations of +the interface to keep track of the audio state. The initial state is _DISABLED; +then, the state transitions to _CONFIGURED, and then, when it is ready to +play audio, to _ENABLED. The state _PLAYING is used when the audio is being +rendered. + + Panel and controller drivers ---------------------------- @@ -156,6 +201,7 @@ timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) "pal" and "ntsc" panel_name tear_elim Tearing elimination 0=off, 1=on +output_type Output type (video encoder only): "composite" or "svideo" There are also some debugfs files at <debugfs>/omapdss/ which show information about clocks and registers. diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 972983e392b..656f8fc9add 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -237,25 +237,29 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { #else /* Frame Buffer */ static struct s3c_fb_pd_win nuri_fb_win0 = { - .win_mode = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 1, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - .refresh = 60, - }, .max_bpp = 24, .default_bpp = 16, + .xres = 1024, + .yres = 600, .virtual_x = 1024, .virtual_y = 2 * 600, }; +static struct fb_videomode nuri_lcd_timing = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 1, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, + .refresh = 60, +}; + static struct s3c_fb_platdata nuri_fb_pdata __initdata = { .win[0] = &nuri_fb_win0, + .vtiming = &nuri_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | VIDCON0_CLKSEL_LCD, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index a7f7fd567dd..f5572be9d7b 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -604,24 +604,28 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { }; #else static struct s3c_fb_pd_win origen_fb_win0 = { - .win_mode = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 16, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - }, + .xres = 1024, + .yres = 600, .max_bpp = 32, .default_bpp = 24, .virtual_x = 1024, .virtual_y = 2 * 600, }; +static struct fb_videomode origen_lcd_timing = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 16, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, +}; + static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .win[0] = &origen_fb_win0, + .vtiming = &origen_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | VIDCON1_INV_VCLK, diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 70df1a0c211..262e9e446a9 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -178,22 +178,26 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { }; #else static struct s3c_fb_pd_win smdkv310_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 24, + .max_bpp = 32, + .default_bpp = 24, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdkv310_lcd_timing = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { .win[0] = &smdkv310_fb_win0, + .vtiming = &smdkv310_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 083b44de9c1..cd92fa86ba4 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -843,25 +843,29 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { #else /* Frame Buffer */ static struct s3c_fb_pd_win universal_fb_win0 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, .virtual_x = 480, .virtual_y = 2 * 800, }; +static struct fb_videomode universal_lcd_timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, +}; + static struct s3c_fb_platdata universal_lcd_pdata __initdata = { .win[0] = &universal_fb_win0, + .vtiming = &universal_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | VIDCON0_CLKSEL_LCD, .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index db5a88a36c6..54d49ddb9b8 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -180,16 +180,133 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) omap4_dsi_mux_pads(dsi_id, 0); } +static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) +{ + return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); +} + +static struct platform_device *create_dss_pdev(const char *pdev_name, + int pdev_id, const char *oh_name, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + struct omap_device *od; + struct omap_hwmod *ohs[1]; + struct omap_hwmod *oh; + int r; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + r = -ENODEV; + goto err; + } + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + ohs[0] = oh; + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not alloc omap_device for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + +static struct platform_device *create_simple_dss_pdev(const char *pdev_name, + int pdev_id, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + int r; + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; - struct omap_hwmod *oh; struct platform_device *pdev; int i, oh_count; - struct omap_display_platform_data pdata; const struct omap_dss_hwmod_data *curr_dss_hwmod; + struct platform_device *dss_pdev; + + /* create omapdss device */ + + board_data->dsi_enable_pads = omap_dsi_enable_pads; + board_data->dsi_disable_pads = omap |