aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/jc4221
-rw-r--r--Documentation/hwmon/k10temp8
-rw-r--r--MAINTAINERS3
-rw-r--r--arch/s390/boot/compressed/misc.c5
-rw-r--r--arch/s390/include/asm/atomic.h26
-rw-r--r--arch/s390/include/asm/cache.h1
-rw-r--r--drivers/char/tpm/tpm.c18
-rw-r--r--drivers/char/tpm/tpm.h2
-rw-r--r--drivers/char/tpm/tpm_tis.c4
-rw-r--r--drivers/hwmon/Kconfig19
-rw-r--r--drivers/hwmon/jc42.c35
-rw-r--r--drivers/hwmon/k10temp.c5
-rw-r--r--drivers/hwmon/lm85.c23
-rw-r--r--drivers/s390/block/dasd_eckd.c2
-rw-r--r--sound/pci/au88x0/au88x0_core.c14
-rw-r--r--sound/pci/hda/hda_intel.c1
-rw-r--r--sound/pci/hda/patch_conexant.c63
-rw-r--r--sound/usb/caiaq/audio.c2
-rw-r--r--sound/usb/caiaq/midi.c2
19 files changed, 176 insertions, 78 deletions
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c..a22ecf48f25 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
- Datasheet: -
+ Datasheet:
+ http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
Author:
Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
Description
-----------
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
The driver auto-detects the chips listed above, but can be manually instantiated
to support other JC 42.4 compliant chips.
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
which applies to all limits. This register can be written by writing into
temp1_crit_hyst. Other hysteresis attributes are read-only.
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
Sysfs entries
-------------
temp1_input Temperature (RO)
-temp1_min Minimum temperature (RW)
-temp1_max Maximum temperature (RW)
-temp1_crit Critical high temperature (RW)
+temp1_min Minimum temperature (RO or RW)
+temp1_max Maximum temperature (RO or RW)
+temp1_crit Critical high temperature (RO or RW)
-temp1_crit_hyst Critical hysteresis temperature (RW)
+temp1_crit_hyst Critical hysteresis temperature (RO or RW)
temp1_max_hyst Maximum hysteresis temperature (RO)
temp1_min_alarm Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a..d2b56a4fd1f 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
Prefix: 'k10temp'
Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
-----------
This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
All these processors have a sensor, but on those for Socket F or AM2+,
the sensor may return inconsistent values (erratum 319). The driver
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c751e6a..6f99e1260db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@ S: Supported
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
-M: Daniel Walker <dwalker@codeaurora.org>
+M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@ M: Guenter Roeck <guenter.roeck@ericsson.com>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1e919..2751b3a8a66 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@ unsigned long decompress_kernel(void)
unsigned long output_addr;
unsigned char *output;
- check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+ output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+ check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
memset(&_bss, 0, &_ebss - &_bss);
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+ output = (unsigned char *) output_addr;
#ifdef CONFIG_BLK_DEV_INITRD
/*
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea11718..5c5ba10384c 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
static inline int atomic_read(const atomic_t *v)
{
- barrier();
- return v->counter;
+ int c;
+
+ asm volatile(
+ " l %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic_set(atomic_t *v, int i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " st %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
static inline long long atomic64_read(const atomic64_t *v)
{
- barrier();
- return v->counter;
+ long long c;
+
+ asm volatile(
+ " lg %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic64_set(atomic64_t *v, long long i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " stg %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline long long atomic64_add_return(long long i, atomic64_t *v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa68b64..2a30d5ac066 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
#define L1_CACHE_BYTES 256
#define L1_CACHE_SHIFT 8
+#define NET_SKB_PAD 32
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index faf5a2c6592..36e0fa161c2 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -577,11 +577,9 @@ duration:
if (rc)
return;
- if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
- be32_to_cpu(tpm_cmd.header.out.length)
- != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+ if (be32_to_cpu(tpm_cmd.header.out.return_code)
+ != 3 * sizeof(u32))
return;
-
duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
chip->vendor.duration[TPM_SHORT] =
usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +939,6 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
}
EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d %d %d\n",
- jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
- jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
- jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index d84ff772c26..72ddb031b69 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,8 +56,6 @@ extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
char *);
extern ssize_t tpm_show_temp_deactivated(struct device *,
struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
- struct device_attribute *attr, char *);
struct tpm_chip;
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0d1d38e5f26..dd21df55689 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -376,7 +376,6 @@ static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
static struct attribute *tis_attrs[] = {
&dev_attr_pubek.attr,
@@ -386,8 +385,7 @@ static struct attribute *tis_attrs[] = {
&dev_attr_owned.attr,
&dev_attr_temp_deactivated.attr,
&dev_attr_caps.attr,
- &dev_attr_cancel.attr,
- &dev_attr_timeouts.attr, NULL,
+ &dev_attr_cancel.attr, NULL,
};
static struct attribute_group tis_attr_grp = {
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f164..297bc9a7d6e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
will be called k8temp.
config SENSORS_K10TEMP
- tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ tristate "AMD Family 10h/11h/12h/14h temperature sensor"
depends on X86 && PCI
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
- the AMD Family 10h and all revisions of the AMD Family 11h
- microarchitectures.
+ the AMD Family 10h and all revisions of the AMD Family 11h,
+ 12h (Llano), and 14h (Brazos) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
called jz4740-hwmon.
config SENSORS_JC42
- tristate "JEDEC JC42.4 compliant temperature sensors"
+ tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
help
- If you say yes here you get support for Jedec JC42.4 compliant
- temperature sensors. Support will include, but not be limited to,
- ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
- MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+ If you say yes here, you get support for JEDEC JC42.4 compliant
+ temperature sensors, which are used on many DDR3 memory modules for
+ mobile devices and servers. Support will include, but not be limited
+ to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+ MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
This driver can also be built as a module. If so, the module
will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
- EMC6D101 and EMC6D102.
+ EMC6D101, EMC6D102, and EMC6D103.
This driver can also be built as a module. If so, the module
will be called lm85.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78c8dd..93499123706 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
/* Configuration register defines */
#define JC42_CFG_CRIT_ONLY (1 << 2)
+#define JC42_CFG_TCRIT_LOCK (1 << 6)
+#define JC42_CFG_EVENT_LOCK (1 << 7)
#define JC42_CFG_SHUTDOWN (1 << 8)
#define JC42_CFG_HYST_SHIFT 9
#define JC42_CFG_HYST_MASK 0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct jc42_data *data = i2c_get_clientdata(client);
- long val;
+ unsigned long val;
int diff, hyst;
int err;
int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
static DEVICE_ATTR(temp1_input, S_IRUGO,
show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
show_temp_crit_hyst, set_temp_crit_hyst);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
NULL
};
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct jc42_data *data = i2c_get_clientdata(client);
+ unsigned int config = data->config;
+ bool readonly;
+
+ if (attr == &dev_attr_temp1_crit.attr)
+ readonly = config & JC42_CFG_TCRIT_LOCK;
+ else if (attr == &dev_attr_temp1_min.attr ||
+ attr == &dev_attr_temp1_max.attr)
+ readonly = config & JC42_CFG_EVENT_LOCK;
+ else if (attr == &dev_attr_temp1_crit_hyst.attr)
+ readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+ else
+ readonly = true;
+
+ return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
static const struct attribute_group jc42_group = {
.attrs = jc42_attributes,
+ .is_visible = jc42_attribute_mode,
};
/* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a2404cd3..82bf65aa296 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
/*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*
@@ -25,7 +25,7 @@
#include <linux/pci.h>
#include <asm/processor.h>
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL");
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37..d2cc2866081 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
enum chips {
any_chip, lm85b, lm85c,
adm1027, adt7463, adt7468,
- emc6d100, emc6d102
+ emc6d100, emc6d102, emc6d103
};
/* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
#define LM85_VERSTEP_EMC6D102 0x65
+#define LM85_VERSTEP_EMC6D103_A0 0x68
+#define LM85_VERSTEP_EMC6D103_A1 0x69
+#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
#define LM85_REG_CONFIG 0x40
@@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = {
{ "emc6d100", emc6d100 },
{ "emc6d101", emc6d100 },
{ "emc6d102", emc6d102 },
+ { "emc6d103", emc6d103 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
case LM85_VERSTEP_EMC6D102:
type_name = "emc6d102";
break;
+ case LM85_VERSTEP_EMC6D103_A0:
+ case LM85_VERSTEP_EMC6D103_A1:
+ type_name = "emc6d103";
+ break;
+ /*
+ * Registers apparently missing in EMC6D103S/EMC6D103:A2
+ * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+ * (according to the data sheets), but used unconditionally
+ * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+ * So skip EMC6D103S for now.
+ case LM85_VERSTEP_EMC6D103S:
+ type_name = "emc6d103s";
+ break;
+ */
}
} else {
dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client,
case adt7468:
case emc6d100:
case emc6d102:
+ case emc6d103:
data->freq_map = adm1027_freq_map;
break;
default:
@@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
/* More alarm bits */
data->alarms |= lm85_read_value(client,
EMC6D100_REG_ALARM3) << 16;
- } else if (data->type == emc6d102) {
+ } else if (data->type == emc6d102 || data->type == emc6d103) {
/* Have to read LSB bits after the MSB ones because
the reading of the MSB bits has frozen the
LSBs (backward from the ADM1027).
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 318672d0556..a9fe23d5bd0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -72,7 +72,7 @@ static struct dasd_discipline dasd_eckd_discipline;
static struct ccw_device_id dasd_eckd_ids[] = {
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
- { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+ { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 23f49f356e0..16c0bdfbb16 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1252,11 +1252,19 @@ static void vortex_adbdma_resetup(vortex_t *vortex, int adbdma) {
static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
{
stream_t *dma = &vortex->dma_adb[adbdma];
- int temp;
+ int temp, page, delta;
temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
- temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
- return temp;
+ page = (temp & ADB_SUBBUF_MASK) >> ADB_SUBBUF_SHIFT;
+ if (dma->nr_periods >= 4)
+ delta = (page - dma->period_real) & 3;
+ else {
+ delta = (page - dma->period_real);
+ if (delta < 0)
+ delta += dma->nr_periods;
+ }
+ return (dma->period_virt + delta) * dma->period_bytes
+ + (temp & (dma->period_bytes - 1));
}
static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0baffcdee8f..fcedad9a5fe 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2308,6 +2308,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x8410, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index fbe97d32140..dd7c5c12225 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3410,7 +3410,7 @@ static void cx_auto_parse_output(struct hda_codec *codec)
}
}
spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.max_channels = nums * 2;
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (cfg->hp_outs > 0)
spec->auto_mute = 1;
@@ -3729,9 +3729,9 @@ static int cx_auto_init(struct hda_codec *codec)
return 0;
}
-static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
+static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename,
const char *dir, int cidx,
- hda_nid_t nid, int hda_dir)
+ hda_nid_t nid, int hda_dir, int amp_idx)
{
static char name[32];
static struct snd_kcontrol_new knew[] = {
@@ -3743,7 +3743,8 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
for (i = 0; i < 2; i++) {
struct snd_kcontrol *kctl;
- knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, hda_dir);
+ knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, amp_idx,
+ hda_dir);
knew[i].subdevice = HDA_SUBDEV_AMP_FLAG;
knew[i].index = cidx;
snprintf(name, sizeof(name), "%s%s %s", basename, dir, sfx[i]);
@@ -3759,6 +3760,9 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
return 0;
}
+#define cx_auto_add_volume(codec, str, dir, cidx, nid, hda_dir) \
+ cx_auto_add_volume_idx(codec, str, dir, cidx, nid, hda_dir, 0)
+
#define cx_auto_add_pb_volume(codec, nid, str, idx) \
cx_auto_add_volume(codec, str, " Playback", idx, nid, HDA_OUTPUT)
@@ -3808,29 +3812,60 @@ static int cx_auto_build_input_controls(struct hda_codec *codec)
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
static const char *prev_label;
- int i, err, cidx;
+ int i, err, cidx, conn_len;
+ hda_nid_t conn[HDA_MAX_CONNECTIONS];
+
+ int multi_adc_volume = 0; /* If the ADC nid has several input volumes */
+ int adc_nid = spec->adc_nids[0];
+
+ conn_len = snd_hda_get_connections(codec, adc_nid, conn,
+ HDA_MAX_CONNECTIONS);
+ if (conn_len < 0)
+ return conn_len;
+
+ multi_adc_volume = cfg->num_inputs > 1 && conn_len > 1;
+ if (!multi_adc_volume) {
+ err = cx_auto_add_volume(codec, "Capture", "", 0, adc_nid,
+ HDA_INPUT);
+ if (err < 0)
+ return err;
+ }
- err = cx_auto_add_volume(codec, "Capture", "", 0, spec->adc_nids[0],
- HDA_INPUT);
- if (err < 0)
- return err;
prev_label = NULL;
cidx = 0;
for (i = 0; i < cfg->num_inputs; i++) {
hda_nid_t nid = cfg->inputs[i].pin;
const char *label;
- if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP))
+ int j;
+ int pin_amp = get_wcaps(codec, nid) & AC_WCAP_IN_AMP;
+ if (!pin_amp && !multi_adc_volume)
continue;
+
label = hda_get_autocfg_input_label(codec, cfg, i);
if (label == prev_label)
cidx++;
else
cidx = 0;
prev_label = label;
- err = cx_auto_add_volume(codec, label, " Capture", cidx,
- nid, HDA_INPUT);
- if (err < 0)
- return err;
+
+ if (pin_amp) {
+ err = cx_auto_add_volume(codec, label, " Boost", cidx,
+ nid, HDA_INPUT);
+ if (err < 0)
+ return err;
+ }
+
+ if (!multi_adc_volume)
+ continue;
+ for (j = 0; j < conn_len; j++) {
+ if (conn[j] == nid) {
+ err = cx_auto_add_volume_idx(codec, label,
+ " Capture", cidx, adc_nid, HDA_INPUT, j);
+ if (err < 0)
+ return err;
+ break;
+ }
+ }
}
return 0;
}
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 68b97477577..66eabafb1c2 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -785,7 +785,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
}
dev->pcm->private_data = dev;
- strcpy(dev->pcm->name, dev->product_name);
+ strlcpy(dev->pcm->name, dev->product_name, sizeof(dev->pcm->name));
memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 2f218c77fff..a1a47088fd0 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -136,7 +136,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
if (ret < 0)
return ret;
- strcpy(rmidi->name, device->product_name);
+ strlcpy(rmidi->name, device->product_name, sizeof(rmidi->name));
rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
rmidi->private_data = device;
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-14 01:19:21 +0000