diff options
| -rw-r--r-- | arch/arm/mach-omap1/devices.c | 44 | ||||
| -rw-r--r-- | arch/arm/plat-omap/devices.c | 45 |
2 files changed, 44 insertions, 45 deletions
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 51387a447cc..b853f6110a4 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -258,6 +258,49 @@ void __init omap1_camera_init(void *info) static inline void omap_init_sti(void) {} +/* Numbering for the SPI-capable controllers when used for SPI: + * spi = 1 + * uwire = 2 + * mmc1..2 = 3..4 + * mcbsp1..3 = 5..7 + */ + +#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) + +#define OMAP_UWIRE_BASE 0xfffb3000 + +static struct resource uwire_resources[] = { + { + .start = OMAP_UWIRE_BASE, + .end = OMAP_UWIRE_BASE + 0x20, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_uwire_device = { + .name = "omap_uwire", + .id = -1, + .num_resources = ARRAY_SIZE(uwire_resources), + .resource = uwire_resources, +}; + +static void omap_init_uwire(void) +{ + /* FIXME define and use a boot tag; not all boards will be hooking + * up devices to the microwire controller, and multi-board configs + * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... + */ + + /* board-specific code must configure chipselects (only a few + * are normally used) and SCLK/SDI/SDO (each has two choices). + */ + (void) platform_device_register(&omap_uwire_device); +} +#else +static inline void omap_init_uwire(void) {} +#endif + + /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -295,6 +338,7 @@ static int __init omap1_init_devices(void) omap_init_rtc(); omap_init_spi100k(); omap_init_sti(); + omap_init_uwire(); return 0; } diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 09b07d25289..16c9ebed8b6 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -109,50 +109,6 @@ static void omap_init_rng(void) static inline void omap_init_rng(void) {} #endif -/*-------------------------------------------------------------------------*/ - -/* Numbering for the SPI-capable controllers when used for SPI: - * spi = 1 - * uwire = 2 - * mmc1..2 = 3..4 - * mcbsp1..3 = 5..7 - */ - -#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) - -#define OMAP_UWIRE_BASE 0xfffb3000 - -static struct resource uwire_resources[] = { - { - .start = OMAP_UWIRE_BASE, - .end = OMAP_UWIRE_BASE + 0x20, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_uwire_device = { - .name = "omap_uwire", - .id = -1, - .num_resources = ARRAY_SIZE(uwire_resources), - .resource = uwire_resources, -}; - -static void omap_init_uwire(void) -{ - /* FIXME define and use a boot tag; not all boards will be hooking - * up devices to the microwire controller, and multi-board configs - * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... - */ - - /* board-specific code must configure chipselects (only a few - * are normally used) and SCLK/SDI/SDO (each has two choices). - */ - (void) platform_device_register(&omap_uwire_device); -} -#else -static inline void omap_init_uwire(void) {} -#endif - #if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) static phys_addr_t omap_dsp_phys_mempool_base; @@ -208,7 +164,6 @@ static int __init omap_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_rng(); - omap_init_uwire(); return 0; } arch_initcall(omap_init_devices); |