diff options
89 files changed, 4013 insertions, 3771 deletions
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS index a564ceea9e9..4484e021290 100644 --- a/Documentation/arm/OMAP/DSS +++ b/Documentation/arm/OMAP/DSS @@ -285,7 +285,10 @@ FB0 +-- GFX ---- LCD ---- LCD Misc notes ---------- -OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. +OMAP FB allocates the framebuffer memory using the standard dma allocator. You +can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma +allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase +the global memory area for CMA. Using DSI DPLL to generate pixel clock it is possible produce the pixel clock of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. @@ -301,11 +304,6 @@ framebuffer parameters. Kernel boot arguments --------------------- -vram=<size>[,<physaddr>] - - Amount of total VRAM to preallocate and optionally a physical start - memory address. For example, "10M". omapfb allocates memory for - framebuffers from VRAM. - omapfb.mode=<display>:<mode>[,...] - Default video mode for specified displays. For example, "dvi:800x400MR-24@60". See drivers/video/modedb.c. diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt new file mode 100644 index 00000000000..c60da67a5d7 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -0,0 +1,80 @@ +The Exynos display port interface should be configured based on +the type of panel connected to it. + +We use two nodes: + -dp-controller node + -dptx-phy node(defined inside dp-controller node) + +For the DP-PHY initialization, we use the dptx-phy node. +Required properties for dptx-phy: + -reg: + Base address of DP PHY register. + -samsung,enable-mask: + The bit-mask used to enable/disable DP PHY. + +For the Panel initialization, we read data from dp-controller node. +Required properties for dp-controller: + -compatible: + should be "samsung,exynos5-dp". + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -interrupt-parent: + phandle to Interrupt combiner node. + -samsung,color-space: + input video data format. + COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 + -samsung,dynamic-range: + dynamic range for input video data. + VESA = 0, CEA = 1 + -samsung,ycbcr-coeff: + YCbCr co-efficients for input video. + COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1 + -samsung,color-depth: + number of bits per colour component. + COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 + -samsung,link-rate: + link rate supported by the panel. + LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A + -samsung,lane-count: + number of lanes supported by the panel. + LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 + +Optional properties for dp-controller: + -interlaced: + interlace scan mode. + Progressive if defined, Interlaced if not defined + -vsync-active-high: + VSYNC polarity configuration. + High if defined, Low if not defined + -hsync-active-high: + HSYNC polarity configuration. + High if defined, Low if not defined + +Example: + +SOC specific portion: + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + + dptx-phy { + reg = <0x10040720>; + samsung,enable-mask = <1>; + }; + + }; + +Board Specific portion: + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt new file mode 100644 index 00000000000..3d0060cff06 --- /dev/null +++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt @@ -0,0 +1,24 @@ +* Solomon SSD1307 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for + now is i2c. + - reg: Should contain address of the controller on the I2C bus. Most likely + 0x3c or 0x3d + - pwm: Should contain the pwm to use according to the OF device tree PWM + specification [0] + - reset-gpios: Should contain the GPIO used to reset the OLED display + +Optional properties: + - reset-active-low: Is the reset gpio is active on physical low? + +[0]: Documentation/devicetree/bindings/pwm/pwm.txt + +Examples: +ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + reset-active-low; +}; diff --git a/MAINTAINERS b/MAINTAINERS index b95ae9b0712..f71d2f901a6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3162,6 +3162,12 @@ F: drivers/video/ F: include/video/ F: include/linux/fb.h +FREESCALE DIU FRAMEBUFFER DRIVER +M: Timur Tabi <timur@freescale.com> +L: linux-fbdev@vger.kernel.org +S: Supported +F: drivers/video/fsl-diu-fb.* + FREESCALE DMA DRIVER M: Li Yang <leoli@freescale.com> M: Zhang Wei <zw@zh-kernel.org> diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 510648e0394..678a54a64da 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -408,7 +408,7 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "pwm2", &pwm2_clk), CLK("eqep.0", NULL, &eqep0_clk), CLK("eqep.1", NULL, &eqep1_clk), - CLK("da8xx_lcdc.0", NULL, &lcdc_clk), + CLK("da8xx_lcdc.0", "fck", &lcdc_clk), CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68c5fe01857..6b9154e9f90 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -403,7 +403,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), - CLK("da8xx_lcdc.0", NULL, &lcdc_clk), + CLK("da8xx_lcdc.0", "fck", &lcdc_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 46c9a0c09ae..fcdbe437409 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -589,29 +589,9 @@ int __init da8xx_register_uio_pruss(void) return platform_device_register(&da8xx_uio_pruss_dev); } -static const struct display_panel disp_panel = { - QVGA, - 16, - 16, - COLOR_ACTIVE, -}; - static struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias = 255, - .ac_bias_intrpt = 0, - .dma_burst_sz = 16, + .panel_shade = COLOR_ACTIVE, .bpp = 16, - .fdd = 255, - .tft_alt_mode = 0, - .stn_565_mode = 0, - .mono_8bit_mode = 0, - .invert_line_clock = 1, - .invert_frm_clock = 1, - .sync_edge = 0, - .sync_ctrl = 1, - .raster_order = 0, - .fifo_th = 6, }; struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index 00946e23c1e..c90250e3bef 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -53,6 +53,7 @@ static struct dev_pm_domain davinci_pm_domain = { static struct pm_clk_notifier_block platform_bus_notifier = { .pm_domain = &davinci_pm_domain, + .con_ids = { "fck", NULL, }, }; static int __init davinci_pm_runtime_init(void) diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index c22e111bcd0..46f4fc98276 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -16,7 +16,6 @@ #include <linux/mm.h> #include <asm/mach-types.h> #include <video/omapdss.h> -#include <plat/vram.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "board-rx51.h" @@ -87,17 +86,4 @@ static int __init rx51_video_init(void) } subsys_initcall(rx51_video_init); - -void __init rx51_video_mem_init(void) -{ - /* - * GFX 864x480x32bpp - * VID1/2 1280x720x32bpp double buffered - */ - omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) + - 2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0); -} - -#else -void __init rx51_video_mem_init(void) { } #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f1d6efe079c..d0374ea2dfb 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -34,8 +34,6 @@ #define RX51_GPIO_SLEEP_IND 162 -extern void rx51_video_mem_init(void); - static struct gpio_led gpio_leds[] = { { .name = "sleep_ind", @@ -112,7 +110,6 @@ static void __init rx51_init(void) static void __init rx51_reserve(void) { - rx51_video_mem_init(); omap_reserve(); } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 38ba58c9762..cc75aaf6e76 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -102,17 +102,20 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) +static void __init omap4_tpd12s015_mux_pads(void) { - u32 reg; - u16 control_i2c_1; - omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", OMAP_PIN_INPUT_PULLUP); +} + +static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) +{ + u32 reg; + u16 control_i2c_1; /* * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and @@ -163,8 +166,10 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) int __init omap_hdmi_init(enum omap_hdmi_flags flags) { - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { omap4_hdmi_mux_pads(flags); + omap4_tpd12s015_mux_pads(); + } return 0; } diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 25eb88a923e..032d10817e7 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -213,95 +213,6 @@ static struct platform_device irda_device = { .num_resources = ARRAY_SIZE(irda_resources), }; -static unsigned char lcd_backlight_seq[3][2] = { - { 0x04, 0x07 }, - { 0x23, 0x80 }, - { 0x03, 0x01 }, -}; - -static void lcd_backlight_on(void) -{ - struct i2c_adapter *a; - struct i2c_msg msg; - int k; - - a = i2c_get_adapter(1); - for (k = 0; a && k < 3; k++) { - msg.addr = 0x6d; - msg.buf = &lcd_backlight_seq[k][0]; - msg.len = 2; - msg.flags = 0; - if (i2c_transfer(a, &msg, 1) != 1) - break; - } -} - -static void lcd_backlight_reset(void) -{ - gpio_set_value(GPIO_PORT235, 0); - mdelay(24); - gpio_set_value(GPIO_PORT235, 1); -} - -/* LCDC0 */ -static const struct fb_videomode lcdc0_modes[] = { - { - .name = "R63302(QHD)", - .xres = 544, - .yres = 961, - .left_margin = 72, - .right_margin = 600, - .hsync_len = 16, - .upper_margin = 8, - .lower_margin = 8, - .vsync_len = 2, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, - }, -}; - -static struct sh_mobile_lcdc_info lcdc0_info = { - .clock_source = LCDC_CLK_PERIPHERAL, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .interface_type = RGB24, - .clock_divider = 1, - .flags = LCDC_FLAGS_DWPOL, |