aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/stmmac.txt143
-rw-r--r--drivers/net/Kconfig25
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/benet/be_cmds.c4
-rw-r--r--drivers/net/benet/be_main.c21
-rw-r--r--drivers/net/bonding/bond_main.c28
-rw-r--r--drivers/net/cxgb4/Makefile7
-rw-r--r--drivers/net/cxgb4/cxgb4.h741
-rw-r--r--drivers/net/cxgb4/cxgb4_main.c3388
-rw-r--r--drivers/net/cxgb4/cxgb4_uld.h239
-rw-r--r--drivers/net/cxgb4/l2t.c624
-rw-r--r--drivers/net/cxgb4/l2t.h110
-rw-r--r--drivers/net/cxgb4/sge.c2431
-rw-r--r--drivers/net/cxgb4/t4_hw.c3131
-rw-r--r--drivers/net/cxgb4/t4_hw.h100
-rw-r--r--drivers/net/cxgb4/t4_msg.h664
-rw-r--r--drivers/net/cxgb4/t4_regs.h878
-rw-r--r--drivers/net/cxgb4/t4fw_api.h1580
-rw-r--r--drivers/net/gianfar.c12
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c12
-rw-r--r--drivers/net/r8169.c4
-rw-r--r--drivers/net/sgiseeq.c4
-rw-r--r--drivers/net/stmmac/Kconfig1
-rw-r--r--drivers/net/wireless/ath/ar9170/usb.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c12
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c4
-rw-r--r--drivers/net/wireless/libertas/cfg.c8
-rw-r--r--drivers/net/wireless/libertas/dev.h1
-rw-r--r--drivers/net/wireless/mwl8k.c1
-rw-r--r--drivers/net/wireless/p54/p54usb.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c4
-rw-r--r--net/bluetooth/l2cap.c3
-rw-r--r--net/bluetooth/rfcomm/sock.c3
-rw-r--r--net/bluetooth/sco.c3
-rw-r--r--net/can/bcm.c3
-rw-r--r--net/ieee802154/af_ieee802154.c3
-rw-r--r--net/ipv4/af_inet.c5
-rw-r--r--net/ipv4/tcp.c1
-rw-r--r--net/mac80211/mesh_hwmp.c4
-rw-r--r--net/mac80211/tx.c6
-rw-r--r--net/mac80211/util.c18
-rw-r--r--net/netlabel/netlabel_domainhash.c28
-rw-r--r--net/netlabel/netlabel_unlabeled.c66
-rw-r--r--net/netlink/af_netlink.c3
-rw-r--r--net/wireless/reg.c12
47 files changed, 14221 insertions, 131 deletions
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
new file mode 100644
index 00000000000..7ee770b5ef5
--- /dev/null
+++ b/Documentation/networking/stmmac.txt
@@ -0,0 +1,143 @@
+ STMicroelectronics 10/100/1000 Synopsys Ethernet driver
+
+Copyright (C) 2007-2010 STMicroelectronics Ltd
+Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
+(Synopsys IP blocks); it has been fully tested on STLinux platforms.
+
+Currently this network device driver is for all STM embedded MAC/GMAC
+(7xxx SoCs).
+
+DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
+Universal version 4.0 have been used for developing the first code
+implementation.
+
+Please, for more information also visit: www.stlinux.com
+
+1) Kernel Configuration
+The kernel configuration option is STMMAC_ETH:
+ Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
+ STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
+
+2) Driver parameters list:
+ debug: message level (0: no output, 16: all);
+ phyaddr: to manually provide the physical address to the PHY device;
+ dma_rxsize: DMA rx ring size;
+ dma_txsize: DMA tx ring size;
+ buf_sz: DMA buffer size;
+ tc: control the HW FIFO threshold;
+ tx_coe: Enable/Disable Tx Checksum Offload engine;
+ watchdog: transmit timeout (in milliseconds);
+ flow_ctrl: Flow control ability [on/off];
+ pause: Flow Control Pause Time;
+ tmrate: timer period (only if timer optimisation is configured).
+
+3) Command line options
+Driver parameters can be also passed in command line by using:
+ stmmaceth=dma_rxsize:128,dma_txsize:512
+
+4) Driver information and notes
+
+4.1) Transmit process
+The xmit method is invoked when the kernel needs to transmit a packet; it sets
+the descriptors in the ring and informs the DMA engine that there is a packet
+ready to be transmitted.
+Once the controller has finished transmitting the packet, an interrupt is
+triggered; So the driver will be able to release the socket buffers.
+By default, the driver sets the NETIF_F_SG bit in the features field of the
+net_device structure enabling the scatter/gather feature.
+
+4.2) Receive process
+When one or more packets are received, an interrupt happens. The interrupts
+are not queued so the driver has to scan all the descriptors in the ring during
+the receive process.
+This is based on NAPI so the interrupt handler signals only if there is work to be
+done, and it exits.
+Then the poll method will be scheduled at some future point.
+The incoming packets are stored, by the DMA, in a list of pre-allocated socket
+buffers in order to avoid the memcpy (Zero-copy).
+
+4.3) Timer-Driver Interrupt
+Instead of having the device that asynchronously notifies the frame receptions, the
+driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the device
+will experience different levels of latency. Some NICs have dedicated timer
+device to perform this task. STMMAC can use either the RTC device or the TMU
+channel 2 on STLinux platforms.
+The timers frequency can be passed to the driver as parameter; when change it,
+take care of both hardware capability and network stability/performance impact.
+Several performance tests on STM platforms showed this optimisation allows to spare
+the CPU while having the maximum throughput.
+
+4.4) WOL
+Wake up on Lan feature through Magic Frame is only supported for the GMAC
+core.
+
+4.5) DMA descriptors
+Driver handles both normal and enhanced descriptors. The latter has been only
+tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
+
+4.6) Ethtool support
+Ethtool is supported. Driver statistics and internal errors can be taken using:
+ethtool -S ethX command. It is possible to dump registers etc.
+
+4.7) Jumbo and Segmentation Offloading
+Jumbo frames are supported and tested for the GMAC.
+The GSO has been also added but it's performed in software.
+LRO is not supported.
+
+4.8) Physical
+The driver is compatible with PAL to work with PHY and GPHY devices.
+
+4.9) Platform information
+Several information came from the platform; please refer to the
+driver's Header file in include/linux directory.
+
+struct plat_stmmacenet_data {
+ int bus_id;
+ int pbl;
+ int has_gmac;
+ void (*fix_mac_speed)(void *priv, unsigned int speed);
+ void (*bus_setup)(unsigned long ioaddr);
+#ifdef CONFIG_STM_DRIVERS
+ struct stm_pad_config *pad_config;
+#endif
+ void *bsp_priv;
+};
+
+Where:
+- pbl (Programmable Burst Length) is maximum number of
+ beats to be transferred in one DMA transaction.
+ GMAC also enables the 4xPBL by default.
+- fix_mac_speed and bus_setup are used to configure internal target
+ registers (on STM platforms);
+- has_gmac: GMAC core is on board (get it at run-time in the next step);
+- bus_id: bus identifier.
+
+struct plat_stmmacphy_data {
+ int bus_id;
+ int phy_addr;
+ unsigned int phy_mask;
+ int interface;
+ int (*phy_reset)(void *priv);
+ void *priv;
+};
+
+Where:
+- bus_id: bus identifier;
+- phy_addr: physical address used for the attached phy device;
+ set it to -1 to get it at run-time;
+- interface: physical MII interface mode;
+- phy_reset: hook to reset HW function.
+
+TODO:
+- Continue to make the driver more generic and suitable for other Synopsys
+ Ethernet controllers used on other architectures (i.e. ARM).
+- 10G controllers are not supported.
+- MAC uses Normal descriptors and GMAC uses enhanced ones.
+ This is a limit that should be reviewed. MAC could want to
+ use the enhanced structure.
+- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
+- Review the timer optimisation code to use an embedded device that seems to be
+ available in new chip generations.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0ba5b8e50a7..7b832c727f8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2582,6 +2582,31 @@ config CHELSIO_T3
To compile this driver as a module, choose M here: the module
will be called cxgb3.
+config CHELSIO_T4_DEPENDS
+ tristate
+ depends on PCI && INET
+ default y
+
+config CHELSIO_T4
+ tristate "Chelsio Communications T4 Ethernet support"
+ depends on CHELSIO_T4_DEPENDS
+ select FW_LOADER
+ select MDIO
+ help
+ This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+ adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module choose M here; the module
+ will be called cxgb4.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 478886234c2..a583b50d9de 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_CHELSIO_T3) += cxgb3/
+obj-$(CONFIG_CHELSIO_T4) += cxgb4/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 50e6259b50e..d0ef4ac987c 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1464,8 +1464,8 @@ int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
req->params.op_type = cpu_to_le32(IMG_TYPE_REDBOOT);
req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
- req->params.offset = offset;
- req->params.data_buf_size = 0x4;
+ req->params.offset = cpu_to_le32(offset);
+ req->params.data_buf_size = cpu_to_le32(0x4);
status = be_mcc_notify_wait(adapter);
if (!status)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 43e8032f923..ec6ace80225 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -807,7 +807,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
return;
}
vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
- vid = be16_to_cpu(vid);
+ vid = swab16(vid);
vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
} else {
netif_receive_skb(skb);
@@ -884,7 +884,7 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
napi_gro_frags(&eq_obj->napi);
} else {
vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
- vid = be16_to_cpu(vid);
+ vid = swab16(vid);
if (!adapter->vlan_grp || adapter->vlans_added == 0)
return;
@@ -1855,7 +1855,7 @@ static bool be_flash_redboot(struct be_adapter *adapter,
p += crc_offset;
status = be_cmd_get_flash_crc(adapter, flashed_crc,
- (img_start + image_size - 4));
+ (image_size - 4));
if (status) {
dev_err(&adapter->pdev->dev,
"could not get crc from flash, not flashing redboot\n");
@@ -1991,7 +1991,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
struct flash_file_hdr_g3 *fhdr3;
struct image_hdr *img_hdr_ptr = NULL;
struct be_dma_mem flash_cmd;
- int status, i = 0;
+ int status, i = 0, num_imgs = 0;
const u8 *p;
strcpy(fw_file, func);
@@ -2017,15 +2017,14 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
if ((adapter->generation == BE_GEN3) &&
(get_ufigen_type(fhdr) == BE_GEN3)) {
fhdr3 = (struct flash_file_hdr_g3 *) fw->data;
- for (i = 0; i < fhdr3->num_imgs; i++) {
+ num_imgs = le32_to_cpu(fhdr3->num_imgs);
+ for (i = 0; i < num_imgs; i++) {
img_hdr_ptr = (struct image_hdr *) (fw->data +
(sizeof(struct flash_file_hdr_g3) +
- i * sizeof(struct image_hdr)));
- if (img_hdr_ptr->imageid == 1) {
- status = be_flash_data(adapter, fw,
- &flash_cmd, fhdr3->num_imgs);
- }
-
+ i * sizeof(struct image_hdr)));
+ if (le32_to_cpu(img_hdr_ptr->imageid) == 1)
+ status = be_flash_data(adapter, fw, &flash_cmd,
+ num_imgs);
}
} else if ((adapter->generation == BE_GEN2) &&
(get_ufigen_type(fhdr) == BE_GEN2)) {
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5b92fbff431..0075514bf32 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4156,7 +4156,7 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
* send the join/membership reports. The curr_active_slave found
* will send all of this type of traffic.
*/
- if ((iph->protocol == htons(IPPROTO_IGMP)) &&
+ if ((iph->protocol == IPPROTO_IGMP) &&
(skb->protocol == htons(ETH_P_IP))) {
read_lock(&bond->curr_slave_lock);
@@ -4450,6 +4450,14 @@ static const struct net_device_ops bond_netdev_ops = {
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
};
+static void bond_destructor(struct net_device *bond_dev)
+{
+ struct bonding *bond = netdev_priv(bond_dev);
+ if (bond->wq)
+ destroy_workqueue(bond->wq);
+ free_netdev(bond_dev);
+}
+
static void bond_setup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
@@ -4470,7 +4478,7 @@ static void bond_setup(struct net_device *bond_dev)
bond_dev->ethtool_ops = &bond_ethtool_ops;
bond_set_mode_ops(bond, bond->params.mode);
- bond_dev->destructor = free_netdev;
+ bond_dev->destructor = bond_destructor;
/* Initialize the device options */
bond_dev->tx_queue_len = 0;
@@ -4542,9 +4550,6 @@ static void bond_uninit(struct net_device *bond_dev)
bond_remove_proc_entry(bond);
- if (bond->wq)
- destroy_workqueue(bond->wq);
-
netif_addr_lock_bh(bond_dev);
bond_mc_list_destroy(bond);
netif_addr_unlock_bh(bond_dev);
@@ -4956,8 +4961,8 @@ int bond_create(struct net *net, const char *name)
bond_setup);
if (!bond_dev) {
pr_err("%s: eek! can't alloc netdev!\n", name);
- res = -ENOMEM;
- goto out;
+ rtnl_unlock();
+ return -ENOMEM;
}
dev_net_set(bond_dev, net);
@@ -4966,19 +4971,16 @@ int bond_create(struct net *net, const char *name)
if (!name) {
res = dev_alloc_name(bond_dev, "bond%d");
if (res < 0)
- goto out_netdev;
+ goto out;
}
res = register_netdevice(bond_dev);
- if (res < 0)
- goto out_netdev;
out:
rtnl_unlock();
+ if (res < 0)
+ bond_destructor(bond_dev);
return res;
-out_netdev:
- free_netdev(bond_dev);
- goto out;
}
static int __net_init bond_net_init(struct net *net)
diff --git a/drivers/net/cxgb4/Makefile b/drivers/net/cxgb4/Makefile
new file mode 100644
index 00000000000..498667487f5
--- /dev/null
+++ b/drivers/net/cxgb4/Makefile
@@ -0,0 +1,7 @@
+#
+# Chelsio T4 driver
+#
+
+obj-$(CONFIG_CHELSIO_T4) += cxgb4.o
+
+cxgb4-objs := cxgb4_main.o l2t.o t4_hw.o sge.o
diff --git a/drivers/net/cxgb4/cxgb4.h b/drivers/net/cxgb4/cxgb4.h
new file mode 100644
index 00000000000..3d8ff4889b5
--- /dev/null
+++ b/drivers/net/cxgb4/cxgb4.h
@@ -0,0 +1,741 @@
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CXGB4_H__
+#define __CXGB4_H__
+
+#include <linux/bitops.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include "cxgb4_uld.h"
+#include "t4_hw.h"
+
+#define FW_VERSION_MAJOR 1
+#define FW_VERSION_MINOR 1
+#define FW_VERSION_MICRO 0
+
+enum {
+ MAX_NPORTS = 4, /* max # of ports */
+ SERNUM_LEN = 16, /* Serial # length */
+ EC_LEN = 16, /* E/C length */
+ ID_LEN = 16, /* ID length */
+};
+
+enum {
+ MEM_EDC0,
+ MEM_EDC1,
+ MEM_MC
+};
+
+enum dev_master {
+ MASTER_CANT,
+ MASTER_MAY,
+ MASTER_MUST
+};
+
+enum dev_state {
+ DEV_STATE_UNINIT,
+ DEV_STATE_INIT,
+ DEV_STATE_ERR
+};
+
+enum {
+ PAUSE_RX = 1 << 0,
+ PAUSE_TX = 1 << 1,
+ PAUSE_AUTONEG = 1 << 2
+};
+
+struct port_stats {
+ u64 tx_octets; /* total # of octets in good frames */
+ u64 tx_frames; /* all good frames */
+ u64 tx_bcast_frames; /* all broadcast frames */
+ u64 tx_mcast_frames; /* all multicast frames */
+ u64 tx_ucast_frames; /* all unicast frames */
+ u64 tx_error_frames; /* all error frames */
+
+ u64 tx_frames_64; /* # of Tx frames in a particular range */
+ u64 tx_frames_65_127;
+ u64 tx_frames_128_255;
+ u64 tx_frames_256_511;
+ u64 tx_frames_512_1023;
+ u64 tx_frames_1024_1518;
+ u64 tx_frames_1519_max;
+
+ u64 tx_drop; /* # of dropped Tx frames */
+ u64 tx_pause; /* # of transmitted pause frames */
+ u64 tx_ppp0; /* # of transmitted PPP prio 0 frames */
+ u64 tx_ppp1; /* # of transmitted PPP prio 1 frames */
+ u64 tx_ppp2; /* # of transmitted PPP prio 2 frames */
+ u64 tx_ppp3; /* # of transmitted PPP prio 3 frames */
+ u64 tx_ppp4; /* # of transmitted PPP prio 4 frames */
+ u64 tx_ppp5; /* # of transmitted PPP prio 5 frames */
+ u64 tx_ppp6; /* # of transmitted PPP prio 6 frames */
+ u64 tx_ppp7; /* # of transmitted PPP prio 7 frames */
+
+ u64 rx_octets; /* total # of octets in good frames */
+ u64 rx_frames; /* all good frames */
+ u64 rx_bcast_frames; /* all broadcast frames */
+ u64 rx_mcast_frames; /* all multicast frames */
+ u64 rx_ucast_frames; /* all unicast frames */
+ u64 rx_too_long; /* # of frames exceeding MTU */
+ u64 rx_jabber; /* # of jabber frames */
+ u64 rx_fcs_err; /* # of received frames with bad FCS */
+ u64 rx_len_err; /* # of received frames with length error */
+ u64 rx_symbol_err; /* symbol errors */
+ u64 rx_runt; /* # of short frames */
+
+ u64 rx_frames_64; /* # of Rx frames in a particular range */
+ u64 rx_frames_65_127;
+ u64 rx_frames_128_255;
+ u64 rx_frames_256_511;
+ u64 rx_frames_512_1023;
+ u64 rx_frames_1024_1518;
+ u64 rx_frames_1519_max;
+
+ u64 rx_pause; /* # of received pause frames */
+ u64 rx_ppp0; /* # of received PPP prio 0 frames */
+ u64 rx_ppp1; /* # of received PPP prio 1 frames */
+ u64 rx_ppp2; /* # of received PPP prio 2 frames */
+ u64 rx_ppp3; /* # of received PPP prio 3 frames */
+ u64 rx_ppp4; /* # of received PPP prio 4 frames */
+ u64 rx_ppp5; /* # of received PPP prio 5 frames */
+ u64 rx_ppp6; /* # of received PPP prio 6 frames */
+ u64 rx_ppp7; /* # of received PPP prio 7 frames */
+
+ u64 rx_ovflow0; /* drops due to buffer-group 0 overflows */
+ u64 rx_ovflow1; /* drops due to buffer-group 1 overflows */
+ u64 rx_ovflow2; /* drops due to buffer-group 2 overflows */
+ u64 rx_ovflow3; /* drops due to buffer-group 3 overflows */
+ u64 rx_trunc0; /* buffer-group 0 truncated packets */
+ u64 rx_trunc1; /* buffer-group 1 truncated packets */
+ u64 rx_trunc2; /* buffer-group 2 truncated packets */
+ u64 rx_trunc3; /* buffer-group 3 truncated packets */
+};
+
+struct lb_port_stats {
+ u64 octets;
+ u64 frames;
+ u64 bcast_frames;
+ u64 mcast_frames;
+ u64 ucast_frames;
+ u64 error_frames;
+
+ u64 frames_64;
+ u64 frames_65_127;
+ u64 frames_128_255;
+ u64 frames_256_511;
+ u64 frames_512_1023;
+ u64 frames_1024_1518;
+ u64 frames_1519_max;
+
+ u64 drop;
+
+ u64 ovflow0;
+ u64 ovflow1;
+ u64 ovflow2;
+ u64 ovflow3;
+ u64 trunc0;
+ u64 trunc1;
+ u64 trunc2;
+ u64 trunc3;
+};
+
+struct tp_tcp_stats {
+ u32 tcpOutRsts;
+ u64 tcpInSegs;
+ u64 tcpOutSegs;
+ u64 tcpRetransSegs;
+};
+
+struct tp_err_stats {
+ u32 macInErrs[4];
+ u32 hdrInErrs[4];
+ u32 tcpInErrs[4];
+ u32 tnlCongDrops[4];
+ u32 ofldChanDrops[4];
+ u32 tnlTxDrops[4];
+ u32 ofldVlanDrops[4];
+ u32 tcp6InErrs[4];
+ u32 ofldNoNeigh;
+ u32 ofldCongDefer;
+};
+
+struct tp_params {
+ unsigned int ntxchan; /* # of Tx channels */
+ unsigned int tre; /* log2 of core clocks per TP tick */
+};
+
+struct vpd_params {
+ unsigned int cclk;
+ u8 ec[EC_LEN + 1];
+ u8 sn[SERNUM_LEN + 1];
+ u8 id[ID_LEN + 1];
+};
+
+struct pci_params {
+ unsigned char speed;
+ unsigned char width;
+};
+
+struct adapter_params {
+ struct tp_params tp;
+ struct vpd_params vpd;
+ struct pci_params pci;
+
+ unsigned int fw_vers;
+ unsigned int tp_vers;
+ u8 api_vers[7];
+
+ unsigned short mtus[NMTUS];
+ unsigned short a_wnd[NCCTRL_WIN];
+ unsigned short b_wnd[NCCTRL_WIN];
+
+ unsigned char nports; /* # of ethernet ports */
+ unsigned char portvec;
+ unsigned char rev; /* chip revision */
+ unsigned char offload;
+
+ unsigned int ofldq_wr_cred;
+};
+
+struct trace_params {
+ u32 data[TRACE_LEN / 4];
+ u32 mask[TRACE_LEN / 4];
+ unsigned short snap_len;
+ unsigned short min_len;
+ unsigned char skip_ofst;
+ unsigned char skip_len;
+ unsigned char invert;
+ unsigned char port;
+};
+
+struct link_config {
+ unsigned short supported; /* link capabilities */
+ unsigned short advertising; /* advertised capabilities */
+ unsigned short requested_speed; /* speed user has requested */
+ unsigned short speed; /* actual link speed */
+ unsigned char requested_fc; /* flow control user has requested */
+ unsigned char fc; /* actual link flow control */
+ unsigned char autoneg; /* autonegotiating? */
+ unsigned char link_ok; /* link up? */
+};
+
+#define FW_LEN16(fw_struct) FW_CMD_LEN16(sizeof(fw_struct) / 16)
+
+enum {
+ MAX_ETH_QSETS = 32, /* # of Ethernet Tx/Rx queue sets */
+ MAX_OFLD_QSETS = 16, /* # of offload Tx/Rx queue sets */
+ MAX_CTRL_QUEUES = NCHAN, /* # of control Tx queues */
+ MAX_RDMA_QUEUES = NCHAN, /* # of streaming RDMA Rx queues */
+};
+
+enum {
+ MAX_EGRQ = 128, /* max # of egress queues, including FLs */
+ MAX_INGQ = 64 /* max # of interrupt-capable ingress queues */
+};
+
+struct adapter;
+struct vlan_group;
+struct sge_rspq;
+
+struct port_info {
+ struct adapter *adapter;
+ struct vlan_group *vlan_grp;
+ u16 viid;
+ s16 xact_addr_filt; /* index of exact MAC address filter */
+ u16 rss_size; /* size of VI's RSS table slice */
+ s8 mdio_addr;
+ u8 port_type;
+ u8 mod_type;
+ u8 port_id;
+ u8 tx_chan;
+ u8 lport; /* associated offload logical port */
+ u8 rx_offload; /* CSO, etc */
+ u8 nqsets; /* # of qsets */
+ u8 first_qset; /* index of first qset */
+ struct link_config link_cfg;
+};
+
+/* port_info.rx_offload flags */
+enum {
+ RX_CSO = 1 << 0,
+};
+
+struct dentry;
+struct work_struct;
+
+enum { /* adapter flags */
+ FULL_INIT_DONE = (1 << 0),
+ USING_MSI = (1 << 1),
+ USING_MSIX = (1 << 2),
+ QUEUES_BOUND = (1 << 3),
+ FW_OK = (1 << 4),
+};
+
+struct rx_sw_desc;
+
+struct sge_fl { /* SGE free-buffer queue state */
+ unsigned int avail; /* # of available Rx buffers */
+ unsigned int pend_cred; /* new buffers since last FL DB ring */
+ unsigned int cidx; /* consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned long alloc_failed; /* # of times buffer allocation failed */
+ unsigned long large_alloc_failed;
+ unsigned long starving;
+ /* RO fields */
+ unsigned int cntxt_id; /* SGE context id for the free list */
+ unsigned int size; /* capacity of free list */
+ struct rx_sw_desc *sdesc; /* address of SW Rx descriptor ring */
+ __be64 *desc; /* address of HW Rx descriptor ring */
+ dma_addr_t addr; /* bus address of HW ring start */
+};
+
+/* A packet gather list */
+struct pkt_gl {
+ skb_frag_t frags[MAX_SKB_FRAGS];
+ void *va; /* virtual address of first byte */
+ unsigned int nfrags; /* # of fragments */
+ unsigned int tot_len; /* total length of fragments */
+};
+
+typedef int (*rspq_handler_t)(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl);
+
+struct sge_rspq { /* state for an SGE response queue */
+ struct napi_struct napi;
+ const __be64 *cur_desc; /* current descriptor in queue */
+ unsigned int cidx; /* consumer index */
+ u8 gen; /* current generation bit */
+ u8 intr_params; /* interrupt holdoff parameters */
+ u8 next_intr_params;