diff options
| -rw-r--r-- | arch/arm/mach-s5pc100/cpu.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-s5pc1xx/Kconfig | 4 | ||||
| -rw-r--r-- | arch/arm/plat-s5pc1xx/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/plat-s5pc1xx/setup-i2c0.c | 7 | ||||
| -rw-r--r-- | arch/arm/plat-s5pc1xx/setup-i2c1.c | 7 |
5 files changed, 20 insertions, 6 deletions
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index a23ca5795bc..1319e3d0ec3 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -75,6 +75,10 @@ void __init s5pc100_map_io(void) iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); /* initialise device information early */ + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index 6ac48a6fba7..1fc25b9f224 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -42,7 +42,7 @@ config S5PC1XX_SETUP_FB_24BPP help Common setup code for S5PC1XX with an 24bpp RGB display helper. -config S5PC100_SETUP_I2C0 +config S5PC1XX_SETUP_I2C0 bool default y help @@ -51,7 +51,7 @@ config S5PC100_SETUP_I2C0 Note, currently since i2c0 is always compiled, this setup helper is always compiled with it. -config S5PC100_SETUP_I2C1 +config S5PC1XX_SETUP_I2C1 bool help Common setup code for i2c bus 1. diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile index 3d2ac7150b1..40ee9571fb0 100644 --- a/arch/arm/plat-s5pc1xx/Makefile +++ b/arch/arm/plat-s5pc1xx/Makefile @@ -26,5 +26,5 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o -obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o +obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c index 3d00c025fff..5e4a7c3a231 100644 --- a/arch/arm/plat-s5pc1xx/setup-i2c0.c +++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Pin configuration would be needed */ + s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c index c8f3ca42f51..a0a8b4ae6ad 100644 --- a/arch/arm/plat-s5pc1xx/setup-i2c1.c +++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - /* Pin configuration would be needed */ + s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP); } |