diff options
43 files changed, 242 insertions, 134 deletions
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 10abd3773e4..16feda90146 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -58,7 +58,7 @@ static void transfer(int fd) }; ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - if (ret == 1) + if (ret < 1) pabort("can't send spi message"); for (ret = 0; ret < ARRAY_SIZE(tx); ret++) { diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 568578db93b..876ca8d5e92 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data { struct omap_musb_board_data { u8 interface_type; u8 mode; - u8 power; + u16 power; }; enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 0fa2e4a0835..c1ab303455c 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -879,8 +879,8 @@ static int isicom_open(struct tty_struct *tty, struct file *filp) if (tport == NULL) return -ENODEV; port = container_of(tport, struct isi_port, port); - card = &isi_card[BOARD(tty->index)]; + tty->driver_data = port; return tty_port_open(tport, tty, filp); } @@ -936,7 +936,12 @@ static void isicom_shutdown(struct tty_port *port) static void isicom_close(struct tty_struct *tty, struct file *filp) { struct isi_port *ip = tty->driver_data; - struct tty_port *port = &ip->port; + struct tty_port *port; + + if (ip == NULL) + return; + + port = &ip->port; if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; tty_port_close(port, tty, filp); diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4cd6c527ee4..4e395c956a0 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -827,6 +827,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; + + tty->driver_data = portp; return tty_port_open(&portp->port, tty, filp); } diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 47023053ee8..d2692d443f7 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1011,6 +1011,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) if (!info->ioaddr) return -ENODEV; + tty->driver_data = info; return tty_port_open(&info->port, tty, filp); } @@ -1074,7 +1075,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; - if (tty->index == MXSER_PORTS) + if (tty->index == MXSER_PORTS || info == NULL) return; if (tty_port_close_start(port, tty, filp) == 0) return; diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 0a8d1e56c99..b02332a5412 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -909,6 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp) if (error) return error; + tty->driver_data = port; return tty_port_open(&port->port, tty, filp); } diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 0e511d61f54..6049fd73192 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -724,7 +724,6 @@ static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; struct stlbrd *brdp; - struct tty_port *port; unsigned int minordev, brdnr, panelnr; int portnr; @@ -754,7 +753,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp) portp = brdp->panels[panelnr]->ports[portnr]; if (portp == NULL) return -ENODEV; - port = &portp->port; + + tty->driver_data = portp; return tty_port_open(&portp->port, tty, filp); } @@ -841,7 +841,8 @@ static void stl_close(struct tty_struct *tty, struct file *filp) pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); portp = tty->driver_data; - BUG_ON(portp == NULL); + if(portp == NULL) + return; tty_port_close(&portp->port, tty, filp); } diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c index f5b6d9fe4de..97e64bcdbc0 100644 --- a/drivers/edac/edac_mce_amd.c +++ b/drivers/edac/edac_mce_amd.c @@ -294,7 +294,6 @@ wrong_ls_mce: void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors) { u32 ec = ERROR_CODE(regs->nbsl); - u32 xec = EXT_ERROR_CODE(regs->nbsl); if (!handle_errors) return; @@ -324,7 +323,7 @@ void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors) pr_cont("\n"); } - pr_emerg("%s.\n", EXT_ERR_MSG(xec)); + pr_emerg("%s.\n", EXT_ERR_MSG(regs->nbsl)); if (BUS_ERROR(ec) && nb_bus_decoder) nb_bus_decoder(node_id, regs); @@ -374,7 +373,7 @@ static int amd_decode_mce(struct notifier_block *nb, unsigned long val, ((m->status & MCI_STATUS_PCC) ? "yes" : "no")); /* do the two bits[14:13] together */ - ecc = m->status & (3ULL << 45); + ecc = (m->status >> 45) & 0x3; if (ecc) pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U")); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 76be229c814..eb0c3fe44b2 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -416,7 +416,8 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev, return 0; free_sd: - sysfs_put(pdesc->value_sd); + if (pdesc) + sysfs_put(pdesc->value_sd); free_id: idr_remove(&pdesc_idr, id); desc->flags &= GPIO_FLAGS_MASK; diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 18ecae4a437..b4748337223 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -69,7 +69,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) } phy = get_phy_device(mdio, be32_to_cpup(addr)); - if (!phy) { + if (!phy || IS_ERR(phy)) { dev_err(&mdio->dev, "error probing PHY at address %i\n", *addr); continue; diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 24485cc62ff..4822cb50cd0 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E6", 0 }, /* Fujitsu Wacom 2FGT Tablet PC device */ { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3119fddaedb..a176ab4bd65 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -29,39 +29,6 @@ * kind, whether express or implied. */ -/* Platform device Usage : - * - * Since PSCs can have multiple function, the correct driver for each one - * is selected by calling mpc52xx_match_psc_function(...). The function - * handled by this driver is "uart". - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - * - * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2, - * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and - * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly - * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it - * will be mapped to. - */ - -/* OF Platform device Usage : - * - * This driver is only used for PSCs configured in uart mode. The device - * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible - * list. - * - * By default, PSC devices are enumerated in the order they are found. However - * a particular PSC number can be forces by adding 'device_no = <port#>' - * to the device node. - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - */ - #undef DEBUG #include <linux/device.h> diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 4eaa043ca2a..700e10833bf 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -752,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) uap->curregs[R5] = new_reg; /* NOTE: Not subject to 'transmitter active' rule. */ - if (ZS_IS_ASLEEP(uap)) + if (ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); return; + } write_zsreg(uap, R5, uap->curregs[R5]); } diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index d8356af118a..e0de0d0eede 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -204,6 +204,7 @@ static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) cs->chconf0 = val; mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val); + mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); } static void omap2_mcspi_set_dma_req(const struct spi_device *spi, @@ -532,7 +533,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) goto out; } #ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %04x\n", + dev_dbg(&spi->dev, "write-%d %08x\n", word_len, *tx); #endif __raw_writel(*tx++, tx_reg); @@ -550,7 +551,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) mcspi_write_chconf0(spi, l); *rx++ = __raw_readl(rx_reg); #ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_dbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); #endif } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 9ffb0fdbd6f..b3a1f9259b6 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -41,7 +41,7 @@ static void spidev_release(struct device *dev) spi->master->cleanup(spi); spi_master_put(spi->master); - kfree(dev); + kfree(spi); } static ssize_t @@ -257,6 +257,7 @@ int spi_add_device(struct spi_device *spi) { static DEFINE_MUTEX(spi_add_lock); struct device *dev = spi->master->dev.parent; + struct device *d; int status; /* Chipselects are numbered 0..max; validate. */ @@ -278,10 +279,11 @@ int spi_add_device(struct spi_device *spi) */ mutex_lock(&spi_add_lock); - if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev)) - != NULL) { + d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev)); + if (d != NULL) { dev_err(dev, "chipselect %d already in use\n", spi->chip_select); + put_device(d); status = -EBUSY; goto done; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index be6331e2c27..5e1a253b08a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1542,6 +1542,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, /* Nokia S60 phones expose two ACM channels. The first is * a modem and is picked up by the standard AT-command diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 97a819c23ef..7e594449600 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -109,7 +109,7 @@ config USB_SUSPEND config USB_OTG bool depends on USB && EXPERIMENTAL - select USB_SUSPEND + depends on USB_SUSPEND default n diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index bdf87a8414a..2c95153c0f2 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -120,7 +120,7 @@ int usb_choose_configuration(struct usb_device *udev) * than a vendor-specific driver. */ else if (udev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC && - (!desc || desc->bInterfaceClass != + (desc && desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC)) { best = c; break; diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 97b40ce133f..4a6366a4212 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -515,13 +515,13 @@ static int fs_create_by_name (const char *name, mode_t mode, *dentry = NULL; mutex_lock(&parent->d_inode->i_mutex); *dentry = lookup_one_len(name, parent, strlen(name)); - if (!IS_ERR(dentry)) { + if (!IS_ERR(*dentry)) { if ((mode & S_IFMT) == S_IFDIR) error = usbfs_mkdir (parent->d_inode, *dentry, mode); else error = usbfs_create (parent->d_inode, *dentry, mode); } else - error = PTR_ERR(dentry); + error = PTR_ERR(*dentry); mutex_unlock(&parent->d_inode->i_mutex); return error; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 1297e9b16a5..0561430f2ed 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -718,7 +718,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); /** - * usb_buffer_alloc - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP + * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP * @dev: device the buffer will be used with * @size: requested buffer size * @mem_flags: affect whether allocation may block @@ -737,30 +737,30 @@ EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); * architectures where CPU caches are not DMA-coherent. On systems without * bus-snooping caches, these buffers are uncached. * - * When the buffer is no longer used, free it with usb_buffer_free(). + * When the buffer is no longer used, free it with usb_free_coherent(). */ -void *usb_buffer_alloc(struct usb_device *dev, size_t size, gfp_t mem_flags, - dma_addr_t *dma) +void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags, + dma_addr_t *dma) { if (!dev || !dev->bus) return NULL; return hcd_buffer_alloc(dev->bus, size, mem_flags, dma); } -EXPORT_SYMBOL_GPL(usb_buffer_alloc); +EXPORT_SYMBOL_GPL(usb_alloc_coherent); /** - * usb_buffer_free - free memory allocated with usb_buffer_alloc() + * usb_free_coherent - free memory allocated with usb_alloc_coherent() * @dev: device the buffer was used with * @size: requested buffer size * @addr: CPU address of buffer * @dma: DMA address of buffer * * This reclaims an I/O buffer, letting it be reused. The memory must have - * been allocated using usb_buffer_alloc(), and the parameters must match + * been allocated using usb_alloc_coherent(), and the parameters must match * those provided in that allocation request. */ -void usb_buffer_free(struct usb_device *dev, size_t size, void *addr, - dma_addr_t dma) +void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, + dma_addr_t dma) { if (!dev || !dev->bus) return; @@ -768,7 +768,7 @@ void usb_buffer_free(struct usb_device *dev, size_t size, void *addr, return; hcd_buffer_free(dev->bus, size, addr, dma); } -EXPORT_SYMBOL_GPL(usb_buffer_free); +EXPORT_SYMBOL_GPL(usb_free_coherent); /** * usb_buffer_map - create DMA mapping(s) for an urb diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 124a8ccfdcd..1f73b485732 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2145,6 +2145,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, u32 epctrl; u32 mps; int dir_in; + int ret = 0; dev_dbg(hsotg->dev, "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", @@ -2196,7 +2197,8 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_ISOC: dev_err(hsotg->dev, "no current ISOC support\n"); - return -EINVAL; + ret = -EINVAL; + goto out; case USB_ENDPOINT_XFER_BULK: epctrl |= S3C_DxEPCTL_EPType_Bulk; @@ -2235,8 +2237,9 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, /* enable the endpoint interrupt */ s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); +out: spin_unlock_irqrestore(&hs_ep->lock, flags); - return 0; + return ret; } static int s3c_hsotg_ep_disable(struct usb_ep *ep) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 68b83ab7071..944291e10f9 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -331,6 +331,8 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) */ if (at91_suspend_entering_slow_clock()) { ohci_usb_reset (ohci); + /* flush the writes */ + (void) ohci_readl (ohci, &ohci->regs->control); at91_stop_clock(); } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 32bbce9718f..65cac8cc892 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -697,7 +697,7 @@ static int ohci_hub_control ( u16 wLength ) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ports = hcd_to_bus (hcd)->root_hub->maxchild; + int ports = ohci->num_ports; u32 temp; int retval = 0; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 50f57f46883..e62b30b3e42 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -660,13 +660,13 @@ static struct ehci_qh *oxu_qh_alloc(struct oxu_hcd *oxu) if (qh->dummy == NULL) { oxu_dbg(oxu, "no dummy td\n"); oxu->qh_used[i] = 0; - - return NULL; + qh = NULL; + goto unlock; } oxu->qh_used[i] = 1; } - +unlock: spin_unlock(&oxu->mem_lock); return qh; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index e11cc3aa4b8..3b867a8af7b 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -720,10 +720,10 @@ retry: /* port status seems weird until after reset, so * force the reset and make khubd clean up later. */ - if (sl811->stat_insrmv & 1) - sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION; - else + if (irqstat & SL11H_INTMASK_RD) sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION); + else + sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION; sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c09539bad1e..d64f5724bfc 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -582,6 +582,19 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, return EP_INTERVAL(interval); } +/* The "Mult" field in the endpoint context is only set for SuperSpeed devices. + * High speed endpoint descriptors can define "the number of additional + * transaction opportunities per microframe", but that goes in the Max Burst + * endpoint context field. + */ +static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp) + return 0; + return ep->ss_ep_comp->desc.bmAttributes; +} + static inline u32 xhci_get_endpoint_type(struct usb_device *udev, struct usb_host_endpoint *ep) { @@ -612,6 +625,36 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev, return type; } +/* Return the maximum endpoint service interval time (ESIT) payload. + * Basically, this is the maxpacket size, multiplied by the burst size + * and mult size. + */ +static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + int max_burst; + int max_packet; + + /* Only applies for interrupt or isochronous endpoints */ + if (usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_bulk(&ep->desc)) + return 0; + + if (udev->speed == USB_SPEED_SUPER) { + if (ep->ss_ep_comp) + return ep->ss_ep_comp->desc.wBytesPerInterval; + xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n"); + /* Assume no bursts, no multiple opportunities to send. */ + return ep->desc.wMaxPacketSize; + } + + max_packet = ep->desc.wMaxPacketSize & 0x3ff; + max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11; + /* A 0 in max burst means 1 transfer per ESIT */ + return max_packet * (max_burst + 1); +} + int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, @@ -623,6 +666,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; unsigned int max_packet; unsigned int max_burst; + u32 max_esit_payload; ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); @@ -644,6 +688,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep); + ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep)); /* FIXME dig Mult and streams info out of ep companion desc */ @@ -689,6 +734,26 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, default: BUG(); } + max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep); + ep_ctx->tx_info = MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload); + + /* + * XXX no idea how to calculate the average TRB buffer length for bulk + * endpoints, as the driver gives us no clue how big each scatter gather + * list entry (or buffer) is going to be. + * + * For isochronous and interrupt endpoints, we set it to the max + * available, until we have new API in the USB core to allow drivers to + * declare how much bandwidth they actually need. + * + * Normally, it wou |