diff options
| -rw-r--r-- | drivers/ide/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/ide/cris/ide-cris.c | 14 | ||||
| -rw-r--r-- | drivers/ide/ide-dma.c | 53 | ||||
| -rw-r--r-- | drivers/ide/ide-io.c | 1 | ||||
| -rw-r--r-- | drivers/ide/ide-lib.c | 12 | ||||
| -rw-r--r-- | drivers/ide/ide.c | 1 | ||||
| -rw-r--r-- | drivers/ide/pci/alim15x3.c | 69 | ||||
| -rw-r--r-- | drivers/ide/pci/cmd64x.c | 15 | ||||
| -rw-r--r-- | drivers/ide/pci/cs5530.c | 160 | ||||
| -rw-r--r-- | drivers/ide/pci/it821x.c | 21 | ||||
| -rw-r--r-- | drivers/ide/pci/pdc202xx_new.c | 29 | ||||
| -rw-r--r-- | drivers/ide/pci/pdc202xx_old.c | 184 | ||||
| -rw-r--r-- | drivers/ide/pci/sc1200.c | 161 | ||||
| -rw-r--r-- | drivers/ide/pci/scc_pata.c | 22 | ||||
| -rw-r--r-- | drivers/ide/pci/serverworks.c | 77 | ||||
| -rw-r--r-- | drivers/ide/pci/siimage.c | 24 | ||||
| -rw-r--r-- | drivers/ide/pci/sis5513.c | 85 | ||||
| -rw-r--r-- | drivers/ide/pci/sl82c105.c | 76 | ||||
| -rw-r--r-- | include/linux/ide.h | 3 |
19 files changed, 340 insertions, 682 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 9040809d2c2..b1a9b81c211 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -4,13 +4,10 @@ # Andre Hedrick <andre@linux-ide.org> # -if BLOCK - -menu "ATA/ATAPI/MFM/RLL support" - depends on HAS_IOMEM - -config IDE +menuconfig IDE tristate "ATA/ATAPI/MFM/RLL support" + depends on BLOCK + depends on HAS_IOMEM ---help--- If you say Y here, your kernel will be able to manage low cost mass storage units such as ATA/(E)IDE and ATAPI units. The most common @@ -1099,8 +1096,4 @@ config BLK_DEV_HD_ONLY config BLK_DEV_HD def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY -endif - -endmenu - -endif +endif # IDE diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index c04cb25a01f..ca0341c05e5 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -1002,18 +1002,6 @@ static int cris_ide_build_dmatable (ide_drive_t *drive) return 1; /* let the PIO routines handle this weirdness */ } -static int cris_config_drive_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (!speed) - return 0; - - speed_cris_ide(drive, speed); - - return ide_dma_enable(drive); -} - /* * cris_dma_intr() is the handler for disk read/write DMA interrupts */ @@ -1043,7 +1031,7 @@ static ide_startstop_t cris_dma_intr (ide_drive_t *drive) static int cris_dma_check(ide_drive_t *drive) { - if (ide_use_dma(drive) && cris_config_drive_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; return -1; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 5fe85191d49..b77b7d138c4 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -670,41 +670,6 @@ int __ide_dma_good_drive (ide_drive_t *drive) EXPORT_SYMBOL(__ide_dma_good_drive); -int ide_use_dma(ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = drive->hwif; - - if ((id->capability & 1) == 0 || drive->autodma == 0) - return 0; - - /* consult the list of known "bad" drives */ - if (__ide_dma_bad_drive(drive)) - return 0; - - /* capable of UltraDMA modes */ - if (id->field_valid & 4) { - if (hwif->ultra_mask & id->dma_ultra) - return 1; - } - - /* capable of regular DMA modes */ - if (id->field_valid & 2) { - if (hwif->mwdma_mask & id->dma_mword) - return 1; - if (hwif->swdma_mask & id->dma_1word) - return 1; - } - - /* consult the list of known "good" drives */ - if (__ide_dma_good_drive(drive) && id->eide_dma_time < 150) - return 1; - - return 0; -} - -EXPORT_SYMBOL_GPL(ide_use_dma); - static const u8 xfer_mode_bases[] = { XFER_UDMA_0, XFER_MW_DMA_0, @@ -731,10 +696,12 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) mask &= 0x07; break; case XFER_MW_DMA_0: - mask = id->dma_mword & hwif->mwdma_mask; + if (id->field_valid & 2) + mask = id->dma_mword & hwif->mwdma_mask; break; case XFER_SW_DMA_0: - mask = id->dma_1word & hwif->swdma_mask; + if (id->field_valid & 2) + mask = id->dma_1word & hwif->swdma_mask; break; default: BUG(); @@ -783,8 +750,11 @@ int ide_tune_dma(ide_drive_t *drive) { u8 speed; - /* TODO: use only ide_max_dma_mode() */ - if (!ide_use_dma(drive)) + if ((drive->id->capability & 1) == 0 || drive->autodma == 0) + return 0; + + /* consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) return 0; speed = ide_max_dma_mode(drive); @@ -792,9 +762,10 @@ int ide_tune_dma(ide_drive_t *drive) if (!speed) return 0; - drive->hwif->speedproc(drive, speed); + if (drive->hwif->speedproc(drive, speed)) + return 0; - return ide_dma_enable(drive); + return 1; } EXPORT_SYMBOL_GPL(ide_tune_dma); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 8e568143d90..bfe8f1b712b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -223,6 +223,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * break; if (drive->hwif->ide_dma_check == NULL) break; + drive->hwif->dma_off_quietly(drive); ide_set_dma(drive); break; } diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 3be3c69383f..074bb32a4a4 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -111,18 +111,6 @@ u8 ide_rate_filter(ide_drive_t *drive, u8 speed) EXPORT_SYMBOL(ide_rate_filter); -int ide_dma_enable (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct hd_driveid *id = drive->id; - - return ((int) ((((id->dma_ultra >> 8) & hwif->ultra_mask) || - ((id->dma_mword >> 8) & hwif->mwdma_mask) || - ((id->dma_1word >> 8) & hwif->swdma_mask)) ? 1 : 0)); -} - -EXPORT_SYMBOL(ide_dma_enable); - int ide_use_fast_pio(ide_drive_t *drive) { struct hd_driveid *id = drive->id; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index f2b547ff772..6002713a20a 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -910,6 +910,7 @@ int set_using_dma(ide_drive_t *drive, int arg) err = 0; if (arg) { + hwif->dma_off_quietly(drive); if (ide_set_dma(drive) || hwif->ide_dma_on(drive)) err = -EIO; } else diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 428efdae0c7..27525ec2e19 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -455,28 +455,6 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) return (ide_config_drive_speed(drive, speed)); } - -/** - * config_chipset_for_dma - set up DMA mode - * @drive: drive to configure for - * - * Place a drive into DMA mode and tune the chipset for - * the selected speed. - * - * Returns true if DMA mode can be used - */ - -static int config_chipset_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (!(speed)) - return 0; - - (void) ali15x3_tune_chipset(drive, speed); - return ide_dma_enable(drive); -} - /** * ali15x3_config_drive_for_dma - configure for DMA * @drive: drive to configure @@ -487,48 +465,14 @@ static int config_chipset_for_dma (ide_drive_t *drive) static int ali15x3_config_drive_for_dma(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct hd_driveid *id = drive->id; - - if ((m5229_revision<=0x20) && (drive->media!=ide_disk)) - goto ata_pio; - drive->init_speed = 0; - if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) { - /* Consult the list of known "bad" drives */ - if (__ide_dma_bad_drive(drive)) - goto ata_pio; - if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) { - if (id->dma_ultra & hwif->ultra_mask) { - /* Force if Capable UltraDMA */ - int dma = config_chipset_for_dma(drive); - if ((id->field_valid & 2) && !dma) - goto try_dma_modes; - } - } else if (id->field_valid & 2) { -try_dma_modes: - if ((id->dma_mword & hwif->mwdma_mask) || - (id->dma_1word & hwif->swdma_mask)) { - /* Force if Capable regular DMA modes */ - if (!config_chipset_for_dma(drive)) - goto ata_pio; - } - } else if (__ide_dma_good_drive(drive) && - (id->eide_dma_time < 150)) { - /* Consult the list of known "good" drives */ - if (!config_chipset_for_dma(drive)) - goto ata_pio; - } else { - goto ata_pio; - } - } else { -ata_pio: - hwif->tuneproc(drive, 255); - return -1; - } + if (ide_tune_dma(drive)) + return 0; - return 0; + ali15x3_tune_drive(drive, 255); + + return -1; } /** @@ -739,7 +683,8 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) return; } - hwif->atapi_dma = 1; + if (m5229_revision > 0x20) + hwif->atapi_dma = 1; if (m5229_revision <= 0x20) hwif->ultra_mask = 0x00; /* no udma */ diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 61ea96b5555..7c57dc696f5 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -352,22 +352,9 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) return ide_config_drive_speed(drive, speed); } -static int config_chipset_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (!speed) - return 0; - - if (cmd64x_tune_chipset(drive, speed)) - return 0; - - return ide_dma_enable(drive); -} - static int cmd64x_config_drive_for_dma (ide_drive_t *drive) { - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index b2d7c132ef4..1eec1f308d1 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -1,10 +1,10 @@ /* - * linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002 + * linux/drivers/ide/pci/cs5530.c Version 0.73 Mar 10 2007 * * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org> - * Ditto of GNU General Public License. - * * Copyright (C) 2000 Mark Lord <mlord@pobox.com> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * * May be copied or modified under the terms of the GNU General Public License * * Development of this chipset driver was funded @@ -62,6 +62,14 @@ static unsigned int cs5530_pio_timings[2][5] = { #define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) #define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) +static void cs5530_tunepio(ide_drive_t *drive, u8 pio) +{ + unsigned long basereg = CS5530_BASEREG(drive->hwif); + unsigned int format = (inl(basereg + 4) >> 31) & 1; + + outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); +} + /** * cs5530_tuneproc - select/set PIO modes * @@ -74,98 +82,78 @@ static unsigned int cs5530_pio_timings[2][5] = { static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */ { - ide_hwif_t *hwif = HWIF(drive); - unsigned int format; - unsigned long basereg = CS5530_BASEREG(hwif); - static u8 modes[5] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4}; - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - if (!cs5530_set_xfer_mode(drive, modes[pio])) { - format = (inl(basereg + 4) >> 31) & 1; - outl(cs5530_pio_timings[format][pio], - basereg+(drive->select.b.unit<<3)); + + if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) + cs5530_tunepio(drive, pio); +} + +/** + * cs5530_udma_filter - UDMA filter + * @drive: drive + * + * cs5530_udma_filter() does UDMA mask filtering for the given drive + * taking into the consideration capabilities of the mate device. + * + * The CS5530 specifies that two drives sharing a cable cannot mix + * UDMA/MDMA. It has to be one or the other, for the pair, though + * different timings can still be chosen for each drive. We could + * set the appropriate timing bits on the fly, but that might be + * a bit confusing. So, for now we statically handle this requirement + * by looking at our mate drive to see what it is capable of, before + * choosing a mode for our own drive. + * + * Note: This relies on the fact we never fail from UDMA to MWDMA2 + * but instead drop to PIO. + */ + +static u8 cs5530_udma_filter(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1]; + struct hd_driveid *mateid = mate->id; + u8 mask = hwif->ultra_mask; + + if (mate->present == 0) + goto out; + + if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) { + if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) + goto out; + if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) + mask = 0; } +out: + return mask; } /** - * cs5530_config_dma - select/set DMA and UDMA modes + * cs5530_config_dma - set DMA/UDMA mode * @drive: drive to tune * - * cs5530_config_dma() handles selection/setting of DMA/UDMA modes - * for both the chipset and drive. The CS5530 has limitations about - * mixing DMA/UDMA on the same cable. + * cs5530_config_dma() handles setting of DMA/UDMA mode + * for both the chipset and drive. */ - -static int cs5530_config_dma (ide_drive_t *drive) + +static int cs5530_config_dma(ide_drive_t *drive) { - int udma_ok = 1, mode = 0; - ide_hwif_t *hwif = HWIF(drive); - int unit = drive->select.b.unit; - ide_drive_t *mate = &hwif->drives[unit^1]; - struct hd_driveid *id = drive->id; - unsigned int reg, timings = 0; - unsigned long basereg; + if (ide_tune_dma(drive)) + return 0; - /* - * Default to DMA-off in case we run into trouble here. - */ - hwif->dma_off_quietly(drive); + return 1; +} - /* - * The CS5530 specifies that two drives sharing a cable cannot - * mix UDMA/MDMA. It has to be one or the other, for the pair, - * though different timings can still be chosen for each drive. - * We could set the appropriate timing bits on the fly, - * but that might be a bit confusing. So, for now we statically - * handle this requirement by looking at our mate drive to see - * what it is capable of, before choosing a mode for our own drive. - * - * Note: This relies on the fact we never fail from UDMA to MWDMA_2 - * but instead drop to PIO - */ - if (mate->present) { - struct hd_driveid *mateid = mate->id; - if (mateid && (mateid->capability & 1) && - !__ide_dma_bad_drive(mate)) { - if ((mateid->field_valid & 4) && - (mateid->dma_ultra & 7)) - udma_ok = 1; - else if ((mateid->field_valid & 2) && - (mateid->dma_mword & 7)) - udma_ok = 0; - else - udma_ok = 1; - } - } +static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode) +{ + unsigned long basereg; + unsigned int reg, timings = 0; - /* - * Now see what the current drive is capable of, - * selecting UDMA only if the mate said it was ok. - */ - if (id && (id->capability & 1) && drive->autodma && - !__ide_dma_bad_drive(drive)) { - if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) { - if (id->dma_ultra & 4) - mode = XFER_UDMA_2; - else if (id->dma_ultra & 2) - mode = XFER_UDMA_1; - else if (id->dma_ultra & 1) - mode = XFER_UDMA_0; - } - if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { - if (id->dma_mword & 4) - mode = XFER_MW_DMA_2; - else if (id->dma_mword & 2) - mode = XFER_MW_DMA_1; - else if (id->dma_mword & 1) - mode = XFER_MW_DMA_0; - } - } + mode = ide_rate_filter(drive, mode); /* * Tell the drive to switch to the new mode; abort on failure. */ - if (!mode || cs5530_set_xfer_mode(drive, mode)) + if (cs5530_set_xfer_mode(drive, mode)) return 1; /* failure */ /* @@ -178,14 +166,21 @@ static int cs5530_config_dma (ide_drive_t *drive) case XFER_MW_DMA_0: timings = 0x00077771; break; case XFER_MW_DMA_1: timings = 0x00012121; break; case XFER_MW_DMA_2: timings = 0x00002020; break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + cs5530_tunepio(drive, mode - XFER_PIO_0); + return 0; default: BUG(); break; } - basereg = CS5530_BASEREG(hwif); + basereg = CS5530_BASEREG(drive->hwif); reg = inl(basereg + 4); /* get drive0 config register */ timings |= reg & 0x80000000; /* preserve PIO format bit */ - if (unit == 0) { /* are we configuring drive0? */ + if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ outl(timings, basereg + 4); /* write drive0 config register */ } else { if (timings & 0x00100000) @@ -311,6 +306,8 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) hwif->serialized = hwif->mate->serialized = 1; hwif->tuneproc = &cs5530_tuneproc; + hwif->speedproc = &cs5530_tune_chipset; + basereg = CS5530_BASEREG(hwif); d0_timings = inl(basereg + 0); if (CS5530_BAD_PIO(d0_timings)) { @@ -332,6 +329,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) hwif->ultra_mask = 0x07; hwif->mwdma_mask = 0x07; + hwif->udma_filter = cs5530_udma_filter; hwif->ide_dma_check = &cs5530_config_dma; if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 442f658c6ae..5faaff87d58 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -464,25 +464,6 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) } /** - * config_chipset_for_dma - configure for DMA - * @drive: drive to configure - * - * Called by the IDE layer when it wants the timings set up. - */ - -static int config_chipset_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (speed == 0) - return 0; - - it821x_tune_chipset(drive, speed); - - return ide_dma_enable(drive); -} - -/** * it821x_configure_drive_for_dma - set up for DMA transfers * @drive: drive we are going to set up * @@ -494,7 +475,7 @@ static int config_chipset_for_dma (ide_drive_t *drive) static int it821x_config_drive_for_dma (ide_drive_t *drive) { - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; it821x_tuneproc(drive, 255); diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 65b1e124edf..cc0bfdcf1f1 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -228,38 +228,11 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif) return get_indexed_reg(hwif, 0x0b) & 0x04; } -static int config_chipset_for_dma(ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = HWIF(drive); - u8 speed; - - if (id->capability & 4) { - /* - * Set IORDY_EN & PREFETCH_EN (this seems to have - * NO real effect since this register is reloaded - * by hardware when the transfer mode is selected) - */ - u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00; - - tmp = get_indexed_reg(hwif, 0x13 + adj); - set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); - } - - speed = ide_max_dma_mode(drive); - - if (!speed) - return 0; - - (void) hwif->speedproc(drive, speed); - return ide_dma_enable(drive); -} - static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive) { drive->init_speed = 0; - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 7146fe3f6ba..23844687dee 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -1,8 +1,9 @@ /* - * linux/drivers/ide/pci/pdc202xx_old.c Version 0.36 Sept 11, 2002 + * linux/drivers/ide/pci/pdc202xx_old.c Version 0.50 Mar 3, 2007 * * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2006-2007 MontaVista Software, Inc. + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * Promise Ultra33 cards with BIOS v1.20 through 1.28 will need this * compiled into the kernel if you have more than one card installed. @@ -60,45 +61,7 @@ static const char *pdc_quirk_drives[] = { NULL }; -/* A Register */ -#define SYNC_ERRDY_EN 0xC0 - -#define SYNC_IN 0x80 /* control bit, different for master vs. slave drives */ -#define ERRDY_EN 0x40 /* control bit, different for master vs. slave drives */ -#define IORDY_EN 0x20 /* PIO: IOREADY */ -#define PREFETCH_EN 0x10 /* PIO: PREFETCH */ - -#define PA3 0x08 /* PIO"A" timing */ -#define PA2 0x04 /* PIO"A" timing */ -#define PA1 0x02 /* PIO"A" timing */ -#define PA0 0x01 /* PIO"A" timing */ - -/* B Register */ - -#define MB2 0x80 /* DMA"B" timing */ -#define MB1 0x40 /* DMA"B" timing */ -#define MB0 0x20 /* DMA"B" timing */ - -#define PB4 0x10 /* PIO_FORCE 1:0 */ - -#define PB3 0x08 /* PIO"B" timing */ /* PIO flow Control mode */ -#define PB2 0x04 /* PIO"B" timing */ /* PIO 4 */ -#define PB1 0x02 /* PIO"B" timing */ /* PIO 3 half */ -#define PB0 0x01 /* PIO"B" timing */ /* PIO 3 other half */ - -/* C Register */ -#define IORDYp_NO_SPEED 0x4F -#define SPEED_DIS 0x0F - -#define DMARQp 0x80 -#define IORDYp 0x40 -#define DMAR_EN 0x20 -#define DMAW_EN 0x10 - -#define MC3 0x08 /* DMA"C" timing */ -#define MC2 0x04 /* DMA"C" timing */ -#define MC1 0x02 /* DMA"C" timing */ -#define MC0 0x01 /* DMA"C" timing */ +static void pdc_old_disable_66MHz_clock(ide_hwif_t *); static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) { @@ -107,52 +70,25 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) u8 drive_pci = 0x60 + (drive->dn << 2); u8 speed = ide_rate_filter(drive, xferspeed); - u32 drive_conf; - u8 AP, BP, CP, DP; + u8 AP = 0, BP = 0, CP = 0; u8 TA = 0, TB = 0, TC = 0; - if (drive->media != ide_disk && - drive->media != ide_cdrom && speed < XFER_SW_DMA_0) - return -1; - +#if PDC202XX_DEBUG_DRIVE_INFO + u32 drive_conf = 0; pci_read_config_dword(dev, drive_pci, &drive_conf); - pci_read_config_byte(dev, (drive_pci), &AP); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - pci_read_config_byte(dev, (drive_pci)|0x02, &CP); - pci_read_config_byte(dev, (drive_pci)|0x03, &DP); +#endif - if (speed < XFER_SW_DMA_0) { - if ((AP & 0x0F) || (BP & 0x07)) { - /* clear PIO modes of lower 8421 bits of A Register */ - pci_write_config_byte(dev, (drive_pci), AP &~0x0F); - pci_read_config_byte(dev, (drive_pci), &AP); - - /* clear PIO modes of lower 421 bits of B Register */ - pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x07); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - - pci_read_config_byte(dev, (drive_pci), &AP); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - } - } else { - if ((BP & 0xF0) && (CP & 0x0F)) { - /* clear DMA modes of upper 842 bits of B Register */ - /* clear PIO forced mode upper 1 bit of B Register */ - pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xF0); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - - /* clear DMA modes of lower 8421 bits of C Register */ - pci_write_config_byte(dev, (drive_pci)|0x02, CP &~0x0F); - pci_read_config_byte(dev, (drive_pci)|0x02, &CP); - } - } + /* + * TODO: do this once per channel + */ + if (dev->device != PCI_DEVICE_ID_PROMISE_20246) + pdc_old_disable_66MHz_clock(hwif); - pci_read_config_byte(dev, (drive_pci), &AP); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - pci_read_config_byte(dev, (drive_pci)|0x02, &CP); + pci_read_config_byte(dev, drive_pci, &AP); + pci_read_config_byte(dev, drive_pci + 1, &BP); + pci_read_config_byte(dev, drive_pci + 2, &CP); switch(speed) { - case XFER_UDMA_6: speed = XFER_UDMA_5; case XFER_UDMA_5: case XFER_UDMA_4: TB = 0x20; TC = 0x01; break; case XFER_UDMA_2: TB = 0x20; TC = 0x01; break; @@ -161,7 +97,7 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_UDMA_0: case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break; case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break; - case XFER_MW_DMA_0: + case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break; case XFER_SW_DMA_2: TB = 0x60; TC = 0x05; break; case XFER_SW_DMA_1: TB = 0x80; TC = 0x06; break; case XFER_SW_DMA_0: TB = 0xC0; TC = 0x0B; break; @@ -174,25 +110,39 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) } if (speed < XFER_SW_DMA_0) { - pci_write_config_byte(dev, (drive_pci), AP|TA); - pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB); + /* + * preserve SYNC_INT / ERDDY_EN bits while clearing + * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A + */ + AP &= ~0x3f; + if (drive->id->capability & 4) + AP |= 0x20; /* set IORDY_EN bit */ + if (drive->media == ide_disk) + AP |= 0x10; /* set Prefetch_EN bit */ + /* clear PB[4:0] bits of register B */ + BP &= ~0x1f; + pci_write_config_byte(dev, drive_pci, AP | TA); + pci_write_config_byte(dev, drive_pci + 1, BP | TB); } else { - pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB); - pci_write_config_byte(dev, (drive_pci)|0x02, CP|TC); + /* clear MB[2:0] bits of register B */ + BP &= ~0xe0; + /* clear MC[3:0] bits of register C */ + CP &= ~0x0f; + pci_write_config_byte(dev, drive_pci + 1, BP | TB); + pci_write_config_byte(dev, drive_pci + 2, CP | TC); } #if PDC202XX_DEBUG_DRIVE_INFO printk(KERN_DEBUG "%s: %s drive%d 0x%08x ", drive->name, ide_xfer_verbose(speed), drive->dn, drive_conf); - pci_read_config_dword(dev, drive_pci, &drive_conf); + pci_read_config_dword(dev, drive_pci, &drive_conf); printk("0x%08x\n", drive_conf); -#endif /* PDC202XX_DEBUG_DRIVE_INFO */ +#endif - return (ide_config_drive_speed(drive, speed)); + return ide_config_drive_speed(drive, speed); } - static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio) { pio = ide_get_best_pio_mode(drive, pio, 4, NULL); @@ -210,6 +160,8 @@ static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) * Set the control register to use the 66MHz system * clock for UDMA 3/4/5 mode operation when necessary. * + * FIXME: this register is shared by both channels, some locking is needed + * * It may also be possible to leave the 66MHz clock on * and readjust the timing parameters. */ @@ -229,65 +181,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); } -static int config_chipset_for_dma (ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u32 drive_conf = 0; - u8 drive_pci = 0x60 + (drive->dn << 2); - u8 test1 = 0, test2 = 0, speed = -1; - u8 AP = 0; - - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) - pdc_old_disable_66MHz_clock(drive->hwif); - - drive_pci = 0x60 + (drive->dn << 2); - pci_read_config_dword(dev, drive_pci, &drive_conf); - if ((drive_conf != 0x004ff304) && (drive_conf != 0x004ff3c4)) - goto chipset_is_set; - - pci_read_config_byte(dev, drive_pci, &test1); - if (!(test1 & SYNC_ERRDY_EN)) { - if (drive->select.b.unit & 0x01) { - pci_read_config_byte(dev, drive_pci - 4, &test2); - if ((test2 & SYNC_ERRDY_EN) && - !(test1 & SYNC_ERRDY_EN)) { - pci_write_config_byte(dev, drive_pci, - test1|SYNC_ERRDY_EN); - } - } else { - pci_write_config_byte(dev, drive_pci, - test1|SYNC_ERRDY_EN); - } - } - -chipset_is_set: - - pci_read_config_byte(dev, (drive_pci), &AP); - if (id->capability & 4) /* IORDY_EN */ - pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN); - pci_read_config_byte(dev, (drive_pci), &AP); - if (drive->media == ide_disk) /* PREFETCH_EN */ - pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); - - speed = ide_max_dma_mode(drive); - - if (!(speed)) { - /* restore original pci-config space */ - pci_write_config_dword(dev, drive_pci, drive_conf); - return 0; - } - - (void) hwif->speedproc(drive, speed); - return ide_dma_enable(drive); -} - static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive) { drive->init_speed = 0; - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index b5ae0c50e21..523363c9379 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -1,7 +1,9 @@ /* - * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 + * linux/drivers/ide/pci/sc1200.c Version 0.94 Mar 10 2007 * * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * * May be copied or modified under the terms of the GNU General Public License * * Development of this chipset driver was funded @@ -93,64 +95,50 @@ static const unsigned int sc1200_pio_timings[4][5] = */ //#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172) -static int sc1200_autoselect_dma_mode (ide_drive_t *drive) +static void sc1200_tunepio(ide_drive_t *drive, u8 pio) { - int udma_ok = 1, mode = 0; - ide_hwif_t *hwif = HWIF(drive); - int unit = drive->select.b.unit; - ide_drive_t *mate = &hwif->drives[unit^1]; - struct hd_driveid *id = drive->id; - - /* - * The SC1200 specifies that two drives sharing a cable cannot - * mix UDMA/MDMA. It has to be one or the other, for the pair, - * though different timings can still be chosen for each drive. - * We could set the appropriate timing bits on the fly, - * but that might be a bit confusing. So, for now we statically - * handle this requirement by looking at our mate drive to see - * what it is capable of, before choosing a mode for our own drive. - */ - if (mate->present) { - struct hd_driveid *mateid = mate->id; - if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) { - if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) - udma_ok = 1; - else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) - udma_ok = 0; - else - udma_ok = 1; - } - } - /* - * Now see what the current drive is capable of, - * selecting UDMA only if the mate said it was ok. - */ - if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) { - if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) { - if (id->dma_ultra & 4) - mode = XFER_UDMA_2; - else if (id->dma_ultra & 2) - mode = XFER_UDMA_1; - else if (id->dma_ultra & 1) - mode = XFER_UDMA_0; - } - if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { - if (id->dma_mword & 4) - mode = XFER_MW_DMA_2; - else if (id->dma_mword & 2) - mode = XFER_MW_DMA_1; - else if (id->dma_mword & 1) - mode = XFER_MW_DMA_0; - } - } - return mode; + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *pdev = hwif->pci_dev; + unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0; + + pci_read_config_dword(pdev, basereg + 4, &format); + format = (format >> 31) & 1; + if (format) + format += sc1200_get_pci_clock(); + pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3), + sc1200_pio_timings[format][pio]); } /* - * sc1200_config_dma2() handles selection/setting of DMA/UDMA modes - * for both the chipset and drive. + * The SC1200 specifies that two drives sharing a cable cannot mix + * UDMA/MDMA. It has to be one or the other, for the pair, though + * different timings can still be chosen for each drive. We could + * set the appropriate timing bits on the fly, but that might be + * a bit confusing. So, for now we statically handle this requirement + * by looking at our mate drive to see what it is capable of, before + * choosing a mode for our own drive. */ -static int sc1200_config_dma2 (ide_drive_t *drive, int mode) +static u8 sc1200_udma_filter(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1]; + struct hd_driveid *mateid = mate->id; + u8 mask = hwif->ultra_mask; + + if (mate->present == 0) + goto out; + + if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) { + if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) + goto out; + if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) + mask = 0; + } +out: + return mask; +} + +static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode) { ide_hwif_t *hwif = HWIF(drive); int unit = drive->select.b.unit; @@ -158,20 +146,26 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode) unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; - /* - * Default to DMA-off in case we run into trouble here. - */ - hwif->dma_off_quietly(drive); /* turn off DMA while we fiddle */ - outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /* clear DMA_capable bit */ + mode = ide_rate_filter(drive, mode); /* * Tell the drive to switch to the new mode; abort on failure. */ - if (!mode || sc1200_set_xfer_mode(drive, mode)) { + if (sc1200_set_xfer_mode(drive, mode)) { printk("SC1200: set xfer mode failure\n"); return 1; /* failure */ } + switch (mode) { + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + sc1200_tunepio(drive, mode - XFER_PIO_0); + return 0; + } + pci_clock = sc1200_get_pci_clock(); /* @@ -224,11 +218,9 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode) case PCI_CLK_66: timings = 0x00015151; break; } break; - } - - if (timings == 0) { - printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock); - return 1; /* failure */ + default: + BUG(); + break; } if (unit == 0) { /* are we configuring drive0? */ @@ -239,8 +231,6 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode) pci_write_config_dword(hwif->pci_dev, basereg+12, timings); } - outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set DMA_capable bit */ - return 0; /* success */ } @@ -250,7 +240,10 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode) */ static int sc1200_config_dma (ide_drive_t *drive) { - return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive)); + if (ide_tune_dma(drive)) + return 0; + + return 1; } @@ -290,10 +283,11 @@ static int sc1200_ide_dma_end (ide_drive_t *drive) static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */ { ide_hwif_t *hwif = HWIF(drive); - unsigned int format; - static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4}; int mode = -1; + /* + * bad abuse of ->tuneproc interface + */ switch (pio) { case 200: mode = XFER_UDMA_0; break; case 201: mode = XFER_UDMA_1; break; @@ -304,20 +298,17 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au } if (mode != -1) { printk("SC1200: %s: changing (U)DMA mode\n", drive->name); - (void)sc1200_config_dma2(drive, mode); + hwif->dma_off_quietly(drive); + if (sc1200_tune_chipset(drive, mode) == 0) + hwif->dma_host_on(drive); return; } pio = ide_get_best_pio_mode(drive, pio, 4, NULL); printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio); - if (!sc1200_set_xfer_mode(drive, modes[pio])) { - unsigned int basereg = hwif->channel ? 0x50 : 0x40; - pci_read_config_dword (hwif->pci_dev, basereg+4, &format); - format = (format >> 31) & 1; - if (format) - format += sc1200_get_pci_clock(); - pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]); - } + + if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) + sc1200_tunepio(drive, pio); } #ifdef CONFIG_PM @@ -438,12 +429,12 @@ static int sc1200_resume (struct pci_dev *dev) for (d = 0; d < MAX_DRIVES; ++d) { ide_drive_t *drive = &(hwif->drives[d]); if (drive->present && !__ide_dma_bad_drive(drive)) { - int was_using_dma = drive->using_dma; + int enable_dma = drive->using_dma; hwif->dma_off_quietly(drive); - sc1200_config_dma(drive); - if (!was_using_dma && drive->using_dma) { - hwif->dma_off_quietly(drive); - } + if (sc1200_config_dma(drive)) + enable_dma = 0; + if (enable_dma) + hwif->dma_host_on(drive); } } } @@ -461,11 +452,13 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif) hwif->serialized = hwif->mate->serialized = 1; hwif->autodma = 0; if (hwif->dma_base) { + hwif->udma_filter = sc1200_udma_filter; hwif->ide_dma_check = &sc1200_config_dma; hwif->ide_dma_end = &sc1200_ide_dma_end; if (!noautodma) hwif->autodma = 1; hwif->tuneproc = &sc1200_tuneproc; + hwif->speedproc = &sc1200_tune_chipset; } hwif->atapi_dma = 1; hwif->ultra_mask = 0x07; diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index cbf93632535..55bc0a32e34 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -322,26 +322,6 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) } /** - * scc_config_chipset_for_dma - configure for DMA - * @drive: drive to configure - * - * Called by scc_config_drive_for_dma(). - */ - -static int scc_config_chipset_for_dma(ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (!speed) - return 0; - - if (scc_tune_chipset(drive, speed)) - return 0; - - return ide_dma_enable(drive); -} - -/** * scc_configure_drive_for_dma - set up for DMA transfers * @drive: drive we are going to set up * @@ -354,7 +334,7 @@ static int scc_config_chipset_for_dma(ide_drive_t *drive) static int scc_config_drive_for_dma(ide_drive_t *drive) { - if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 2fa6d92d16c..6234f806c6b 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -1,9 +1,10 @@ /* - * linux/drivers/ide/pci/serverworks.c Version 0.8 25 Ebr 2003 + * linux/drivers/ide/pci/serverworks.c Version 0.9 Mar 4 2007 * * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * Portions copyright (c) 2001 Sun Microsystems * * @@ -136,19 +137,14 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 speed; - u8 pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + u8 speed = ide_rate_filter(drive, xferspeed); + u8 pio = ide_get_best_pio_mode(drive, 255, 4, NULL); u8 unit = (drive->select.b.unit & 0x01); u8 csb5 = svwks_csb_check(dev); u8 ultra_enable = 0, ultra_timing = 0; u8 dma_timing = 0, pio_timing = 0; u16 csb5_pio = 0; - if (xferspeed == 255) /* PIO auto-tuning */ - speed = XFER_PIO_0 + pio; - else - speed = ide_rate_filter(drive, xferspeed); - /* If we are about to put a disk into UDMA mode we screwed up. Our code assumes we never _ever_ do this on an OSB4 */ @@ -231,6 +227,9 @@ oem_setup_failed: case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_MW_DMA_0: + /* + * TODO: always setup PIO mode so this won't be needed + */ pio_timing |= pio_modes[pio]; csb5_pio |= (pio << (4*drive->dn)); dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; @@ -242,6 +241,9 @@ oem_setup_failed: case XFER_UDMA_2: case XFER_UDMA_1: case XFER_UDMA_0: + /* + * TODO: always setup PIO mode so this won't be needed + */ pio_timing |= pio_modes[pio]; csb5_pio |= (pio << (4*drive->dn)); dma_timing |= dma_modes[2]; @@ -262,72 +264,21 @@ oem_setup_failed: return (ide_config_drive_speed(drive, speed)); } -static void config_chipset_for_pio (ide_drive_t *drive) -{ - u16 eide_pio_timing[6] = {960, 480, 240, 180, 120, 90}; - u16 xfer_pio = drive->id->eide_pio_modes; - u8 timing, speed, pio; - - pio = ide_get_best_pio_mode(drive, 255, 5, NULL); - - if (xfer_pio > 4) - xfer_pio = 0; - - if (drive->id->eide_pio_iordy > 0) - for (xfer_pio = 5; - xfer_pio>0 && - drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio]; - xfer_pio--); - else - xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 : - (drive->id->eide_pio_modes & 2) ? 0x04 : - (drive->id->eide_pio_modes & 1) ? 0x03 : - (drive->id->tPIO & 2) ? 0x02 : - (drive->id->tPIO & 1) ? 0x01 : xfer_pio; - - timing = (xfer_pio >= pio) ? xfer_pio : pio; - - switch(timing) { - case 4: speed = XFER_PIO_4;break; - case 3: speed = XFER_PIO_3;break; - case 2: speed = XFER_PIO_2;break; - case 1: speed = XFER_PIO_1;break; - default: - speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW; - break; - } - (void) svwks_tune_chipset(drive, speed); - drive->current_speed = speed; -} - static void svwks_tune_drive (ide_drive_t *drive, u8 pio) { - if(pio == 255) - (void) svwks_tune_chipset(drive, 255); - else - (void) svwks_tune_chipset(drive, (XFER_PIO_0 + pio)); -} - -static int config_chipset_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (!(speed)) - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); - - (void) svwks_tune_chipset(drive, speed); - return ide_dma_enable(drive); + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + (void)svwks_tune_chipset(drive, XFER_PIO_0 + pio); } static int svwks_config_drive_xfer_rate (ide_drive_t *drive) { drive->init_speed = 0; - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) - config_chipset_for_pio(drive); + svwks_tune_drive(drive, 255); return -1; } diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index d09e74c2996..1a4444e7226 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -375,28 +375,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) } /** - * config_chipset_for_dma - configure for DMA - * @drive: drive to configure - * - * Called by the IDE layer when it wants the timings set up. - * For the CMD680 we also need to set up the PIO timings and - * enable DMA. - */ - -static int config_chipset_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_max_dma_mode(drive); - - if (!speed) - return 0; - - if (siimage_tune_chipset(drive, speed)) - return 0; - - return ide_dma_enable(drive); -} - -/** * siimage_configure_drive_for_dma - set up for DMA transfers * @drive: drive we are going to set up * @@ -408,7 +386,7 @@ static int config_chipset_for_dma (ide_drive_t *drive) static int siimage_config_drive_for_dma (ide_drive_t *drive) { - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 2bde1b92784..bb6cc4aedd6 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -1,9 +1,11 @@ /* - * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003 + * linux/drivers/ide/pci/sis5513.c Version 0.20 Mar 4, 2007 * * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * * May be copied or modified under the terms of the GNU General Public License * * @@ -448,36 +450,15 @@ static void config_drive_art_rwp (ide_drive_t *drive) pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); } - /* Set per-drive active and recovery time */ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 timing, drive_pci, test1, test2; - - u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90}; - u16 xfer_pio = drive->id->eide_pio_modes; + u8 drive_pci, test1, test2; config_drive_art_rwp(drive); - pio = ide_get_best_pio_mode(drive, 255, pio, NULL); - - if (xfer_pio> 4) - xfer_pio = 0; - - if (drive->id->eide_pio_iordy > 0) { - for (xfer_pio = 5; - (xfer_pio > 0) && - (drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]); - xfer_pio--); - } else { - xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 : - (drive->id->eide_pio_modes & 2) ? 0x04 : - (drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio; - } - - timing = (xfer_pio >= pio) ? xfer_pio : pio; /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */ drive_pci = 0x40; @@ -500,17 +481,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) test1 &= ~0x0F; test2 &= ~0x07; - switch(timing) { + switch(pio) { case 4: test1 |= 0x01; test2 |= 0x03; break; case 3: test1 |= 0x03; test2 |= 0x03; break; case 2: test1 |= 0x04; test2 |= 0x04; break; case 1: test1 |= 0x07; test2 |= 0x06; break; + case 0: /* PIO0: register setting == X000 */ default: break; } pci_write_config_byte(dev, drive_pci, test1); pci_write_config_byte(dev, drive_pci+1, test2); } else if (chipset_family < ATA_133) { - switch(timing) { /* active recovery + switch(pio) { /* active recovery v v */ case 4: test1 = 0x30|0x01; break; case 3: test1 = 0x30|0x03; break; @@ -525,24 +507,28 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) pci_read_config_dword(dev, drive_pci, &test3); test3 &= 0xc0c00fff; if (test3 & 0x08) { - test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12; - test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16; - test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24; + test3 |= ini_time_value[ATA_133][pio] << 12; + test3 |= act_time_value[ATA_133][pio] << 16; + test3 |= rco_time_value[ATA_133][pio] << 24; } else { - test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12; - test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16; - test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24; + test3 |= ini_time_value[ATA_100][pio] << 12; + test3 |= act_time_value[ATA_100][pio] << 16; + test3 |= rco_time_value[ATA_100][pio] << 24; } pci_write_config_dword(dev, drive_pci, test3); } } -static int config_chipset_for_pio (ide_drive_t *drive, u8 pio) +static int sis5513_tune_drive(ide_drive_t *drive, u8 pio) { - if (pio == 255) - pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); config_art_rwp_pio(drive, pio); - return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4)); + return ide_config_drive_speed(drive, XFER_PIO_0 + pio); +} + +static void sis5513_tuneproc(ide_drive_t *drive, u8 pio) +{ + (void)sis5513_tune_drive(drive, pio); } static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) @@ -622,25 +608,26 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_SW_DMA_1: case XFER_SW_DMA_0: break; - case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4)); - case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3)); - case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2)); - case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1)); + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: case XFER_PIO_0: - default: return((int) config_chipset_for_pio(drive, 0)); + return sis5513_tune_drive(drive, speed - XFER_PIO_0); + default: + BUG(); + break; } - return ((int) ide_config_drive_speed(drive, speed)); -} - -static void sis5513_tune_drive (ide_drive_t *drive, u8 pio) -{ - (void) config_chipset_for_pio(drive, pio); + return ide_config_drive_speed(drive, speed); } static int sis5513_config_xfer_rate(ide_drive_t *drive) { - config_art_rwp_pio(drive, 5); + /* + * TODO: always set PIO mode and remove this + */ + sis5513_tuneproc(drive, 255); drive->init_speed = 0; @@ -648,7 +635,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - sis5513_tune_drive(drive, 5); + sis5513_tuneproc(drive, 255); return -1; } @@ -836,7 +823,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) if (!hwif->irq) hwif->irq = hwif->channel ? 15 : 14; - hwif->tuneproc = &sis5513_tune_drive; + hwif->tuneproc = &sis5513_tuneproc; hwif->speedproc = &sis5513_tune_chipset; if (!(hwif->dma_base)) { diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index fe3b4b91f85..7c383d9cc47 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -82,7 +82,14 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio) pio = ide_get_best_pio_mode(drive, pio, 5, &p); - drive->drive_data = drv_ctrl = get_pio_timings(&p); + drv_ctrl = get_pio_timings(&p); + + /* + * Store the PIO timings so that we can restore them + * in case DMA will be turned off... + */ + drive->drive_data &= 0xffff0000; + drive->drive_data |= drv_ctrl; if (!drive->using_dma) { /* @@ -100,17 +107,55 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio) } /* - * Configure the drive for DMA. - * We'll program the chipset only when DMA is actually turned on. + * Configure the drive and chipset for a new transfer speed. */ -static int config_for_dma(ide_drive_t *drive) +static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed) { - DBG(("config_for_dma(drive:%s)\n", drive->name)); + static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; + u16 drv_ctrl; - if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) - return 0; + DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", + drive->name, ide_xfer_verbose(speed))); - return ide_dma_enable(drive); + speed = ide_rate_filter(drive, speed); + + switch (speed) { + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; + + /* + * Store the DMA timings so that we can actually program + * them when DMA will be turned on... + */ + drive->drive_data &= 0x0000ffff; + drive->drive_data |= (unsigned long)drv_ctrl << 16; + + /* + * If we are already using DMA, we just reprogram + * the drive control register. + */ + if (drive->using_dma) { + struct pci_dev *dev = HWIF(drive)->pci_dev; + int reg = 0x44 + drive->dn * 4; + + pci_write_config_word(dev, reg, drv_ctrl); + } + break; + case XFER_PIO_5: + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0); + break; + default: + return -1; + } + + return ide_config_drive_speed(drive, speed); } /* @@ -120,7 +165,7 @@ static int sl82c105_ide_dma_check(ide_drive_t *drive) { DBG(("sl82c105_ide_dma_check(drive:%s)\n", drive->name)); - if (ide_use_dma(drive) && config_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; return -1; @@ -219,7 +264,7 @@ static int sl82c105_ide_dma_on(ide_drive_t *drive) rc = __ide_dma_on(drive); if (rc == 0) { - pci_write_config_word(dev, reg, 0x0200); + pci_write_config_word(dev, reg, drive->drive_data >> 16); printk(KERN_INFO "%s: DMA enabled\n", drive->name); } @@ -304,7 +349,7 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) /* * The bridge should be part of the same device, but function 0. */ - bridge = pci_find_slot(dev->bus->number, + bridge = pci_get_bus_and_slot(dev->bus->number, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); if (!bridge) return -1; @@ -314,13 +359,15 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) */ if (bridge->vendor != PCI_VENDOR_ID_WINBOND || bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || - bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) { + pci_dev_put(bridge); return -1; - + } /* * We need to find function 0's revision, not function 1 */ pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); + pci_dev_put(bridge); return rev; } @@ -357,6 +404,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); hwif->tuneproc = &sl82c105_tune_drive; + hwif->speedproc = &sl82c105_tune_chipset; hwif->selectproc = &sl82c105_selectproc; hwif->resetproc = &sl82c105_resetproc; @@ -388,7 +436,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) } hwif->atapi_dma = 1; - hwif->mwdma_mask = 0x04; + hwif->mwdma_mask = 0x07; hwif->ide_dma_check = &sl82c105_ide_dma_check; hwif->ide_dma_on = &sl82c105_ide_dma_on; diff --git a/include/linux/ide.h b/include/linux/ide.h index df4e6a51031..07aba87d369 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1281,7 +1281,6 @@ struct drive_list_entry { int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); int __ide_dma_bad_drive(ide_drive_t *); int __ide_dma_good_drive(ide_drive_t *); -int ide_use_dma(ide_drive_t *); u8 ide_max_dma_mode(ide_drive_t *); int ide_tune_dma(ide_drive_t *); void ide_dma_off(ide_drive_t *); @@ -1309,7 +1308,6 @@ extern int __ide_dma_timeout(ide_drive_t *); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ #else -static inline int ide_use_dma(ide_drive_t *drive) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline int ide_tune_dma(ide_drive_t *drive) { return 0; } static inline void ide_dma_off(ide_drive_t *drive) { ; } @@ -1357,7 +1355,6 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) /* ide-lib.c */ u8 ide_rate_filter(ide_drive_t *, u8); -extern int ide_dma_enable(ide_drive_t *drive); extern char *ide_xfer_verbose(u8 xfer_rate); extern void ide_toggle_bounce(ide_drive_t *drive, int on); extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate); |