aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/max3444029
-rw-r--r--drivers/hwmon/pmbus/Kconfig4
-rw-r--r--drivers/hwmon/pmbus/max34440.c112
3 files changed, 138 insertions, 7 deletions
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 36b335c461d..bbdf9bf5d8f 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -11,6 +11,11 @@ Supported chips:
Prefixes: 'max34441'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+ * Maxim MAX34446
+ PMBus Power-Supply Data Logger
+ Prefixes: 'max34446'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
@@ -19,8 +24,8 @@ Description
-----------
This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller.
+Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -33,6 +38,13 @@ This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
+For MAX34446, the value of the currX_crit attribute determines if current or
+voltage measurement is enabled for a given channel. Voltage measurement is
+enabled if currX_crit is set to 0; current measurement is enabled if the
+attribute is set to a positive value. Power measurement is only enabled if
+channel 1 (3) is configured for voltage measurement, and channel 2 (4) is
+configured for current measurement.
+
Platform data support
---------------------
@@ -60,16 +72,27 @@ in[1-6]_lowest Historical minimum voltage.
in[1-6]_highest Historical maximum voltage.
in[1-6]_reset_history Write any value to reset history.
+ MAX34446 only supports in[1-4].
+
curr[1-6]_label "iout[1-6]".
curr[1-6]_input Measured current. From READ_IOUT register.
curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+curr[1-4]_average Historical average current (MAX34446 only).
curr[1-6]_highest Historical maximum current.
curr[1-6]_reset_history Write any value to reset history.
in6 and curr6 attributes only exist for MAX34440.
+ MAX34446 only supports curr[1-4].
+
+power[1,3]_label "pout[1,3]"
+power[1,3]_input Measured power.
+power[1,3]_average Historical average power.
+power[1,3]_highest Historical maximum power.
+
+ Power attributes only exist for MAX34446.
temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register.
temp1 is the chip's internal temperature. temp2..temp5
@@ -80,7 +103,9 @@ temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register.
temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp[1-8]_max_alarm Temperature high alarm.
temp[1-8]_crit_alarm Temperature critical high alarm.
+temp[1-8]_average Historical average temperature (MAX34446 only).
temp[1-8]_highest Historical maximum temperature.
temp[1-8]_reset_history Write any value to reset history.
temp7 and temp8 attributes only exist for MAX34440.
+ MAX34446 only supports temp[1-3].
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index d1aa2dbd5b7..1f0d0110b6b 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -68,11 +68,11 @@ config SENSORS_MAX16064
be called max16064.
config SENSORS_MAX34440
- tristate "Maxim MAX34440/MAX34441"
+ tristate "Maxim MAX34440 and compatibles"
default n
help
If you say yes here you get hardware monitoring support for Maxim
- MAX34440 and MAX34441.
+ MAX34440, MAX34441, and MAX34446.
This driver can also be built as a module. If so, the module will
be called max34440.
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index 95ee9e195cb..2ada7b021fb 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -25,21 +25,35 @@
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { max34440, max34441 };
+enum chips { max34440, max34441, max34446 };
#define MAX34440_MFR_VOUT_PEAK 0xd4
#define MAX34440_MFR_IOUT_PEAK 0xd5
#define MAX34440_MFR_TEMPERATURE_PEAK 0xd6
#define MAX34440_MFR_VOUT_MIN 0xd7
+#define MAX34446_MFR_POUT_PEAK 0xe0
+#define MAX34446_MFR_POUT_AVG 0xe1
+#define MAX34446_MFR_IOUT_AVG 0xe2
+#define MAX34446_MFR_TEMPERATURE_AVG 0xe3
+
#define MAX34440_STATUS_OC_WARN (1 << 0)
#define MAX34440_STATUS_OC_FAULT (1 << 1)
#define MAX34440_STATUS_OT_FAULT (1 << 5)
#define MAX34440_STATUS_OT_WARN (1 << 6)
+struct max34440_data {
+ int id;
+ struct pmbus_driver_info info;
+};
+
+#define to_max34440_data(x) container_of(x, struct max34440_data, info)
+
static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
{
int ret;
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct max34440_data *data = to_max34440_data(info);
switch (reg) {
case PMBUS_VIRT_READ_VOUT_MIN:
@@ -50,14 +64,43 @@ static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
ret = pmbus_read_word_data(client, page,
MAX34440_MFR_VOUT_PEAK);
break;
+ case PMBUS_VIRT_READ_IOUT_AVG:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_IOUT_AVG);
+ break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, page,
MAX34440_MFR_IOUT_PEAK);
break;
+ case PMBUS_VIRT_READ_POUT_AVG:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_POUT_AVG);
+ break;
+ case PMBUS_VIRT_READ_POUT_MAX:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_POUT_PEAK);
+ break;
+ case PMBUS_VIRT_READ_TEMP_AVG:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, page,
+ MAX34446_MFR_TEMPERATURE_AVG);
+ break;
case PMBUS_VIRT_READ_TEMP_MAX:
ret = pmbus_read_word_data(client, page,
MAX34440_MFR_TEMPERATURE_PEAK);
break;
+ case PMBUS_VIRT_RESET_POUT_HISTORY:
+ if (data->id != max34446)
+ return -ENXIO;
+ ret = 0;
+ break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
case PMBUS_VIRT_RESET_IOUT_HISTORY:
case PMBUS_VIRT_RESET_TEMP_HISTORY:
@@ -73,9 +116,19 @@ static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
static int max34440_write_word_data(struct i2c_client *client, int page,
int reg, u16 word)
{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct max34440_data *data = to_max34440_data(info);
int ret;
switch (reg) {
+ case PMBUS_VIRT_RESET_POUT_HISTORY:
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_POUT_PEAK, 0);
+ if (ret)
+ break;
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_POUT_AVG, 0);
+ break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_VOUT_MIN, 0x7fff);
@@ -87,11 +140,18 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
case PMBUS_VIRT_RESET_IOUT_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_IOUT_PEAK, 0);
+ if (!ret && data->id == max34446)
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_IOUT_AVG, 0);
+
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_TEMPERATURE_PEAK,
0x8000);
+ if (!ret && data->id == max34446)
+ ret = pmbus_write_word_data(client, page,
+ MAX34446_MFR_TEMPERATURE_AVG, 0);
break;
default:
ret = -ENODATA;
@@ -225,20 +285,66 @@ static struct pmbus_driver_info max34440_info[] = {
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
+ [max34446] = {
+ .pages = 7,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_POWER] = direct,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 3,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 3,
+ .m[PSC_POWER] = 1,
+ .b[PSC_POWER] = 0,
+ .R[PSC_POWER] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+ .func[4] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[5] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max34440_read_byte_data,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
};
static int max34440_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- return pmbus_do_probe(client, id, &max34440_info[id->driver_data]);
+ struct max34440_data *data;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct max34440_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ data->id = id->driver_data;
+ data->info = max34440_info[id->driver_data];
+
+ return pmbus_do_probe(client, id, &data->info);
}
static const struct i2c_device_id max34440_id[] = {
{"max34440", max34440},
{"max34441", max34441},
+ {"max34446", max34446},
{}
};
-
MODULE_DEVICE_TABLE(i2c, max34440_id);
/* This is the driver that will be inserted */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-16 15:40:35 +0000