diff options
| -rw-r--r-- | arch/mips/Kconfig | 1 | ||||
| -rw-r--r-- | arch/mips/include/asm/mips-boards/generic.h | 4 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/Makefile | 10 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-init.c | 5 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-memory.c | 138 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-setup.c | 27 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3.dts | 26 |
7 files changed, 70 insertions, 141 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2ac626ab9d4..1110cd718ff 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -353,6 +353,7 @@ config MIPS_SEAD3 select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO + select USE_OF help This enables support for the MIPS Technologies SEAD3 evaluation board. diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h index 6e23ceb0ba8..c01e286394d 100644 --- a/arch/mips/include/asm/mips-boards/generic.h +++ b/arch/mips/include/asm/mips-boards/generic.h @@ -87,6 +87,10 @@ extern int mips_revision_sconid; +#ifdef CONFIG_OF +extern struct boot_param_header __dtb_start; +#endif + #ifdef CONFIG_PCI extern void mips_pcibios_init(void); #else diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile index 626afeac438..10ec701ce6c 100644 --- a/arch/mips/mti-sead3/Makefile +++ b/arch/mips/mti-sead3/Makefile @@ -5,10 +5,12 @@ # Copyright (C) 2008 Wind River Systems, Inc. # written by Ralf Baechle <ralf@linux-mips.org> # +# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved. +# Steven J. Hill <sjhill@mips.com> +# obj-y := sead3-lcd.o sead3-cmdline.o \ sead3-display.o sead3-init.o sead3-int.o \ - sead3-mtd.o sead3-net.o \ - sead3-memory.o sead3-platform.o \ + sead3-mtd.o sead3-net.o sead3-platform.o \ sead3-reset.o sead3-setup.o sead3-time.o obj-y += sead3-i2c-dev.o sead3-i2c.o \ @@ -17,3 +19,7 @@ obj-y += sead3-i2c-dev.o sead3-i2c.o \ obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o +obj-$(CONFIG_OF) += sead3.dtb.o + +$(obj)/%.dtb: $(obj)/%.dts + $(call if_changed,dtc) diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c index a958cad6fff..f95abaa1aa5 100644 --- a/arch/mips/mti-sead3/sead3-init.c +++ b/arch/mips/mti-sead3/sead3-init.c @@ -77,7 +77,6 @@ void __init prom_init(void) board_ejtag_handler_setup = mips_ejtag_setup; prom_init_cmdline(); - prom_meminit(); #ifdef CONFIG_EARLY_PRINTK if ((strstr(prom_getcmdline(), "console=ttyS0")) != NULL) prom_init_early_console(0); @@ -89,3 +88,7 @@ void __init prom_init(void) strcat(prom_getcmdline(), " console=ttyS0,38400n8r"); #endif } + +void prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/mti-sead3/sead3-memory.c b/arch/mips/mti-sead3/sead3-memory.c deleted file mode 100644 index da9244106f8..00000000000 --- a/arch/mips/mti-sead3/sead3-memory.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. - */ -#include <linux/bootmem.h> - -#include <asm/bootinfo.h> -#include <asm/sections.h> -#include <asm/mips-boards/prom.h> - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; - -static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -/* determined physical memory size, not overridden by command line args */ -unsigned long physical_memsize = 0L; - -struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str, *ptr; - unsigned int memsize; - static char cmdline[COMMAND_LINE_SIZE] __initdata; - long val; - int tmp; - - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - pr_warn("memsize not set in boot prom, set to default 32Mb\n"); - physical_memsize = 0x02000000; - } else { - tmp = kstrtol(memsize_str, 0, &val); - physical_memsize = (unsigned long)val; - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) - memsize = memparse(ptr + 8, &ptr); - else - memsize = physical_memsize; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c index 8ad46ad31b4..f012fd164ce 100644 --- a/arch/mips/mti-sead3/sead3-setup.c +++ b/arch/mips/mti-sead3/sead3-setup.c @@ -6,6 +6,12 @@ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. */ #include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/of_fdt.h> +#include <linux/bootmem.h> + +#include <asm/mips-boards/generic.h> +#include <asm/prom.h> int coherentio; /* 0 => no DMA cache coherency (may be set by user) */ int hw_coherentio; /* 0 => no HW DMA cache coherency (reflects real HW) */ @@ -17,4 +23,25 @@ const char *get_system_type(void) void __init plat_mem_setup(void) { + /* + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ + __dt_setup_arch(&__dtb_start); +} + +void __init device_tree_init(void) +{ + unsigned long base, size; + + if (!initial_boot_params) + return; + + base = virt_to_phys((void *)initial_boot_params); + size = be32_to_cpu(initial_boot_params->totalsize); + + /* Before we do anything, lets reserve the dt blob */ + reserve_bootmem(base, size, BOOTMEM_DEFAULT); + + unflatten_device_tree(); } diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/mti-sead3/sead3.dts new file mode 100644 index 00000000000..658f4378705 --- /dev/null +++ b/arch/mips/mti-sead3/sead3.dts @@ -0,0 +1,26 @@ +/dts-v1/; + +/memreserve/ 0x00000000 0x00001000; // reserved +/memreserve/ 0x00001000 0x000ef000; // ROM data +/memreserve/ 0x000f0000 0x004cc000; // reserved + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mti,sead-3"; + + cpus { + cpu@0 { + compatible = "mti,mips14KEc", "mti,mips14Kc"; + }; + }; + + chosen { + bootargs = "console=ttyS1,38400 rootdelay=10 root=/dev/sda3"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; |