aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c66
1 files changed, 56 insertions, 10 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 4c2b5a81711..07a86a30f67 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -1154,10 +1154,12 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
* If a target takes us into the command phase
* assume that it has been externally reset and
* has thus lost our previous packetized negotiation
- * agreement.
- * Revert to async/narrow transfers until we
- * can renegotiate with the device and notify
- * the OSM about the reset.
+ * agreement. Since we have not sent an identify
+ * message and may not have fully qualified the
+ * connection, we change our command to TUR, assert
+ * ATN and ABORT the task when we go to message in
+ * phase. The OSM will see the REQUEUE_REQUEST
+ * status and retry the command.
*/
scbid = ahd_get_scbptr(ahd);
scb = ahd_lookup_scb(ahd, scbid);
@@ -1184,7 +1186,28 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
ahd_set_syncrate(ahd, &devinfo, /*period*/0,
/*offset*/0, /*ppr_options*/0,
AHD_TRANS_ACTIVE, /*paused*/TRUE);
- scb->flags |= SCB_EXTERNAL_RESET;
+ /* Hand-craft TUR command */
+ ahd_outb(ahd, SCB_CDB_STORE, 0);
+ ahd_outb(ahd, SCB_CDB_STORE+1, 0);
+ ahd_outb(ahd, SCB_CDB_STORE+2, 0);
+ ahd_outb(ahd, SCB_CDB_STORE+3, 0);
+ ahd_outb(ahd, SCB_CDB_STORE+4, 0);
+ ahd_outb(ahd, SCB_CDB_STORE+5, 0);
+ ahd_outb(ahd, SCB_CDB_LEN, 6);
+ scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE);
+ scb->hscb->control |= MK_MESSAGE;
+ ahd_outb(ahd, SCB_CONTROL, scb->hscb->control);
+ ahd_outb(ahd, MSG_OUT, HOST_MSG);
+ ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
+ /*
+ * The lun is 0, regardless of the SCB's lun
+ * as we have not sent an identify message.
+ */
+ ahd_outb(ahd, SAVED_LUN, 0);
+ ahd_outb(ahd, SEQ_FLAGS, 0);
+ ahd_assert_atn(ahd);
+ scb->flags &= ~SCB_PACKETIZED;
+ scb->flags |= SCB_ABORT|SCB_EXTERNAL_RESET;
ahd_freeze_devq(ahd, scb);
ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
ahd_freeze_scb(scb);
@@ -1620,8 +1643,10 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
/*
* Ignore external resets after a bus reset.
*/
- if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE))
+ if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE)) {
+ ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
return;
+ }
/*
* Clear bus reset flag
@@ -2301,6 +2326,22 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
if (sent_msg == MSG_ABORT_TAG)
tag = SCB_GET_TAG(scb);
+ if ((scb->flags & SCB_EXTERNAL_RESET) != 0) {
+ /*
+ * This abort is in response to an
+ * unexpected switch to command phase
+ * for a packetized connection. Since
+ * the identify message was never sent,
+ * "saved lun" is 0. We really want to
+ * abort only the SCB that encountered
+ * this error, which could have a different
+ * lun. The SCB will be retried so the OS
+ * will see the UA after renegotiating to
+ * packetized.
+ */
+ tag = SCB_GET_TAG(scb);
+ saved_lun = scb->hscb->lun;
+ }
found = ahd_abort_scbs(ahd, target, 'A', saved_lun,
tag, ROLE_INITIATOR,
CAM_REQ_ABORTED);
@@ -7985,6 +8026,11 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
ahd_clear_fifo(ahd, 1);
/*
+ * Clear SCSI interrupt status
+ */
+ ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
+
+ /*
* Reenable selections
*/
ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST);
@@ -8017,10 +8063,6 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
}
}
#endif
- /* Notify the XPT that a bus reset occurred */
- ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD,
- CAM_LUN_WILDCARD, AC_BUS_RESET);
-
/*
* Revert to async/narrow transfers until we renegotiate.
*/
@@ -8042,6 +8084,10 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
}
}
+ /* Notify the XPT that a bus reset occurred */
+ ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD,
+ CAM_LUN_WILDCARD, AC_BUS_RESET);
+
ahd_restart(ahd);
return (found);