diff options
31 files changed, 792 insertions, 128 deletions
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 37d45c4f88f..996c7fefd25 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -172,6 +172,10 @@ alarm-gpios = <&gpio1 8 0>; }; + restart_poweroff { + compatible = "restart-poweroff"; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 7c022fd4aef..09c820fc177 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -29,6 +29,11 @@ clock-frequency = <200000000>; status = "okay"; }; + poweroff@12100 { + compatible = "qnap,power-off"; + reg = <0x12000 0x100>; + clocks = <&gate_clk 7>; + }; spi@10600 { status = "okay"; diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 0f2d80da737..fae939d3d7f 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -86,7 +86,7 @@ CONFIG_TOUCHSCREEN_ST1232=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 +CONFIG_SERIAL_SH_SCI_NR_UARTS=9 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index ce987211a60..34e9780e63b 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -55,14 +55,11 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set -# CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_TTY_PRINTK=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_BCM2835=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BCM2835=y @@ -70,11 +67,27 @@ CONFIG_SPI=y CONFIG_SPI_BCM2835=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_SIMPLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM2835=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_LEDS_TRIGGER_CAMERA=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 6524cdf3b08..845f5cdf62b 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -31,6 +31,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp" CONFIG_CMDLINE_FORCE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y @@ -48,6 +49,14 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_M25P80=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set @@ -71,7 +80,23 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y +CONFIG_SPI_SH_HSPI=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_RCAR_PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RX8581=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index f6e585b353a..1ad028023a6 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -84,9 +84,12 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_SH_MOBILE=y CONFIG_GPIO_PCF857X=y # CONFIG_HWMON is not set +CONFIG_MFD_AS3711=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_AS3711=y CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_FB_SH_MOBILE_MERAM=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4aa64010661..340d550c12b 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1,6 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_ARCH_SIRF=y @@ -48,6 +49,8 @@ CONFIG_SERIAL_SIRFSOC=y CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_IPMI_HANDLER=y CONFIG_IPMI_SI=y CONFIG_I2C=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index abbe31937c6..2ac0ffb12f0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -210,6 +210,8 @@ CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y CONFIG_USB_TEST=y +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index f7ba316164d..1effb43dab8 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -21,8 +21,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_TEGRA=y CONFIG_GPIO_PCA953X=y +CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y @@ -36,7 +36,6 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y @@ -81,7 +80,6 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_CMA=y CONFIG_MTD=y -CONFIG_MTD_CHAR=y CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -105,8 +103,8 @@ CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_TEGRA=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set @@ -121,6 +119,7 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y +CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_GPIO_PCA953X_IRQ=y @@ -129,14 +128,15 @@ CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y +CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_LM90=y -CONFIG_MFD_TPS6586X=y -CONFIG_MFD_TPS65910=y CONFIG_MFD_MAX8907=y -CONFIG_MFD_TPS65090=y CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65090=y +CONFIG_MFD_TPS6586X=y +CONFIG_MFD_TPS65910=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y @@ -171,6 +171,7 @@ CONFIG_SND=y # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y +CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y @@ -190,7 +191,13 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_PALMAS=y @@ -203,7 +210,6 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y @@ -213,6 +219,7 @@ CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y CONFIG_IIO=y +CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_TEGRA=y CONFIG_EXT2_FS=y diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index e610e137aa3..b634f9650a7 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -227,6 +227,7 @@ config MACH_KM_KIRKWOOD_DT config MACH_LSXL_DT bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT + select POWER_RESET_RESTART help Say 'Y' here if you want your kernel to support the Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using @@ -288,6 +289,13 @@ config MACH_READYNAS_DT Say 'Y' here if you want your kernel to support the NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. +config MACH_SHEEVAPLUG_DT + bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell (eSATA) SheevaPlug (Flattened Device Tree). + config MACH_TOPKICK_DT bool "USI Topkick (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -300,6 +308,7 @@ config MACH_TS219_DT select ARCH_KIRKWOOD_DT select ARM_APPENDED_DTB select ARM_ATAG_DTB_COMPAT + select POWER_RESET_QNAP help Say 'Y' here if you want your kernel to support the QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 2fdc3a7ad22..ac4cd75dd49 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -39,5 +39,6 @@ obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o +obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index cee5dc71cb6..6e122ed3282 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -108,6 +108,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("globalscale,guruplug")) guruplug_dt_init(); + if (of_machine_is_compatible("globalscale,sheevaplug")) + sheevaplug_dt_init(); + if (of_machine_is_compatible("dlink,dns-kirkwood")) dnskw_init(); @@ -165,6 +168,7 @@ static void __init kirkwood_dt_init(void) static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", "globalscale,guruplug", + "globalscale,sheevaplug", "dlink,dns-320", "dlink,dns-325", "iom,iconnect", diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 4ec8b7ae784..348395238df 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -25,19 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -/* - * On the LS-XHL/LS-CHLv2, the shutdown process is following: - * - Userland monitors key events until the power switch goes to off position - * - The board reboots - * - U-boot starts and goes into an idle mode waiting for the user - * to move the switch to ON position - * - */ -static void lsxl_power_off(void) -{ - kirkwood_restart('h', NULL); -} - void __init lsxl_init(void) { /* @@ -46,7 +33,4 @@ void __init lsxl_init(void) kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - - /* register power-off method */ - pm_power_off = lsxl_power_off; } diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c new file mode 100644 index 00000000000..fa389373ca7 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-sheevaplug.c @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-kirkwood/board-sheevaplug.c + * + * Marvell Sheevaplug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include "common.h" + +static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +void __init sheevaplug_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&sheevaplug_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 4695d5f35fc..860f44ab457 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -23,7 +23,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "tsx1x-common.h" static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), @@ -38,6 +37,4 @@ void __init qnap_dt_ts219_init(void) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - - pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index e2e19b302c2..1c09f3f93fb 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -67,6 +67,11 @@ void guruplug_dt_init(void); #else static inline void guruplug_dt_init(void) {}; #endif +#ifdef CONFIG_MACH_SHEEVAPLUG_DT +void sheevaplug_dt_init(void); +#else +static inline void sheevaplug_dt_init(void) {}; +#endif #ifdef CONFIG_MACH_TS219_DT void qnap_dt_ts219_init(void); #else diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 62a15e289c7..91449c5cb70 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -234,16 +234,26 @@ static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { { I2C_BOARD_INFO("retu-mfd", 0x01), }, + { + I2C_BOARD_INFO("tahvo-mfd", 0x02), + }, }; static void __init nokia770_cbus_init(void) { const int retu_irq_gpio = 62; + const int tahvo_irq_gpio = 40; if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) return; + if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) { + gpio_free(retu_irq_gpio); + return; + } irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING); nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); + nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); platform_device_register(&nokia770_cbus_device); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index f76d0de7b40..8c026269bac 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -174,6 +174,7 @@ static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = { .ud_gpio = OMAP3EVM_LCD_PANEL_UD, }; +#ifdef CONFIG_BROKEN static void __init omap3_evm_display_init(void) { int r; @@ -193,6 +194,7 @@ static void __init omap3_evm_display_init(void) else gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); } +#endif static struct omap_dss_device omap3_evm_lcd_device = { .name = "lcd", @@ -715,7 +717,9 @@ static void __init omap3_evm_init(void) omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); +#ifdef CONFIG_BROKEN omap3_evm_display_init(); +#endif omap3_evm_wl12xx_init(); omap_twl4030_audio_init("omap3evm", NULL); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 4ca6b680aa7..5748b5d06c2 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -68,6 +68,7 @@ #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 +#define OVERO_SMSC911X_NRESET 64 #define OVERO_SMSC911X2_CS 4 #define OVERO_SMSC911X2_GPIO 65 @@ -122,7 +123,7 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0, .cs = OVERO_SMSC911X_CS, .gpio_irq = OVERO_SMSC911X_GPIO, - .gpio_reset = -EINVAL, + .gpio_reset = OVERO_SMSC911X_NRESET, .flags = SMSC911X_USE_32BIT, }; diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 55b8c9fef95..5eb0caa6a7d 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -26,6 +26,7 @@ #include <linux/platform_device.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/sh_clk.h> #include <linux/smsc911x.h> #include <mach/common.h> #include <mach/irqs.h> @@ -65,7 +66,21 @@ static const struct pinctrl_map ape6evm_pinctrl_map[] = { static void __init ape6evm_add_standard_devices(void) { + + struct clk *parent; + struct clk *mp; + r8a73a4_clock_init(); + + /* MP clock parent = extal2 */ + parent = clk_get(NULL, "extal2"); + mp = clk_get(NULL, "mp"); + BUG_ON(IS_ERR(parent) || IS_ERR(mp)); + + clk_set_parent(mp, parent); + clk_put(parent); + clk_put(mp); + pinctrl_register_mappings(ape6evm_pinctrl_map, ARRAY_SIZE(ape6evm_pinctrl_map)); r8a73a4_pinmux_init(); diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 7ed2401b899..d5554646916 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -18,14 +18,52 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mtd/partitions.h> #include <linux/pinctrl/machine.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7778.h> #include <asm/mach/arch.h> +/* + * CN9(Upper side) SCIF/RCAN selection + * + * 1,4 3,6 + * SW40 SCIF RCAN + * SW41 SCIF RCAN + */ + +/* + * MMC (CN26) pin + * + * SW6 (D2) 3 pin + * SW7 (D5) ON + * SW8 (D3) 3 pin + * SW10 (D4) 1 pin + * SW12 (CLK) 1 pin + * SW13 (D6) 3 pin + * SW14 (CMD) ON + * SW15 (D6) 1 pin + * SW16 (D0) ON + * SW17 (D1) ON + * SW18 (D7) 3 pin + * SW19 (MMC) 1 pin + */ + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_data = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, @@ -38,36 +76,128 @@ static struct resource smsc911x_resources[] = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +/* USB */ static struct rcar_phy_platform_data usb_phy_platform_data __initdata; +/* SDHI */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, +}; + +static struct sh_eth_plat_data ether_platform_data __initdata = { + .phy = 0x01, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .register_type = SH_ETH_REG_FAST_RCAR, + .phy_interface = PHY_INTERFACE_MODE_RMII, + /* + * Although the LINK signal is available on the board, it's connected to + * the link/activity LED output of the PHY, thus the link disappears and + * reappears after each packet. We'd be better off ignoring such signal + * and getting the link state from the PHY indirectly. + */ + .no_ether_link = 1, +}; + +/* I2C */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("rx8581", 0x51), + }, +}; + +/* HSPI*/ +static struct mtd_partition m25p80_spi_flash_partitions[] = { + { + .name = "data(spi)", + .size = 0x0100000, + .offset = 0, + }, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "m25p80", + .type = "s25fl008k", + .parts = m25p80_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions), +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 104000000, + .chip_select = 0, + .bus_num = 0, + .mode = SPI_MODE_0, + .platform_data = &spi_flash_data, + }, +}; + +/* MMC */ +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, +}; + static const struct pinctrl_map bockw_pinctrl_map[] = { + /* Ether */ + PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", + "ether_rmii", "ether"), + /* HSPI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778", + "hspi0_a", "hspi0"), + /* MMC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", + "mmc_data8", "mmc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", + "mmc_ctrl", "mmc"), /* SCIF0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", "scif0_data_a", "scif0"), PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", "scif0_ctrl", "scif0"), + /* USB */ PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", "usb0", "usb0"), PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", "usb1", "usb1"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0", "sdhi0"), }; +#define FPGA 0x18200000 #define IRQ0MR 0x30 +#define PFC 0xfffc0000 +#define PUPR4 0x110 static void __init bockw_init(void) { - void __iomem *fpga; + void __iomem *base; r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); r8a7778_add_usb_phy_device(&usb_phy_platform_data); + r8a7778_add_ether_device(ðer_platform_data); + r8a7778_add_i2c_device(0); + r8a7778_add_hspi_device(0); + r8a7778_add_mmc_device(&sh_mmcif_plat); + i2c_register_board_info(0, i2c0_devices, + ARRAY_SIZE(i2c0_devices)); + spi_register_board_info(spi_board_info, + ARRAY_SIZE(spi_board_info)); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); r8a7778_pinmux_init(); - fpga = ioremap_nocache(0x18200000, SZ_1M); - if (fpga) { + /* for SMSC */ + base = ioremap_nocache(FPGA, SZ_1M); + if (base) { /* * CAUTION * @@ -75,16 +205,33 @@ static void __init bockw_init(void) * it should be cared in the future * Now, it is assuming IRQ0 was used only from SMSC. */ - u16 val = ioread16(fpga + IRQ0MR); + u16 val = ioread16(base + IRQ0MR); val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - iounmap(fpga); + iowrite16(val, base + IRQ0MR); + iounmap(base); + + regulator_register_fixed(0, dummy_supplies, + ARRAY_SIZE(dummy_supplies)); platform_device_register_resndata( &platform_bus, "smsc911x", -1, smsc911x_resources, ARRAY_SIZE(smsc911x_resources), &smsc911x_data, sizeof(smsc911x_data)); } + + /* for SDHI */ + base = ioremap_nocache(PFC, 0x200); + if (base) { + /* + * FIXME + * + * SDHI CD/WP pin needs pull-up + */ + iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4); + iounmap(base); + + r8a7778_sdhi_init(0, &sdhi0_info); + } } static const char *bockw_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index c016ccd9243..4368000e112 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -56,7 +56,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device smsc91x_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 1fdf05cb6da..165483c9bee 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -29,6 +29,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/as3711.h> #include <linux/mfd/tmio.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> @@ -606,6 +607,140 @@ static struct platform_device fsi_ak4648_device = { }; /* I2C */ + +/* StepDown1 is used to supply 1.315V to the CPU */ +static struct regulator_init_data as3711_sd1 = { + .constraints = { + .name = "1.315V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 1315000, + .max_uV = 1335000, + }, +}; + +/* StepDown2 is used to supply 1.8V to the CPU and to the board */ +static struct regulator_init_data as3711_sd2 = { + .constraints = { + .name = "1.8V", + .boot_on = 1, + .always_on = 1, + .min_uV = 1800000, + .max_uV = 1800000, + }, +}; + +/* + * StepDown3 is switched in parallel with StepDown2, seems to be off, + * according to read-back pre-set register values + */ + +/* StepDown4 is used to supply 1.215V to the CPU and to the board */ +static struct regulator_init_data as3711_sd4 = { + .constraints = { + .name = "1.215V", + .boot_on = 1, + .always_on = 1, + .min_uV = 1215000, + .max_uV = 1235000, + }, +}; + +/* LDO1 is unused and unconnected */ + +/* LDO2 is used to supply 2.8V to the CPU */ +static struct regulator_init_data as3711_ldo2 = { + .constraints = { + .name = "2.8V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 2800000, + .max_uV = 2800000, + }, +}; + +/* LDO3 is used to supply 3.0V to the CPU */ +static struct regulator_init_data as3711_ldo3 = { + .constraints = { + .name = "3.0V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 3000000, + .max_uV = 3000000, + }, +}; + +/* LDO4 is used to supply 2.8V to the board */ +static struct regulator_init_data as3711_ldo4 = { + .constraints = { + .name = "2.8V", + .boot_on = 1, + .always_on = 1, + .min_uV = 2800000, + .max_uV = 2800000, + }, +}; + +/* LDO5 is switched parallel to LDO4, also set to 2.8V */ +static struct regulator_init_data as3711_ldo5 = { + .constraints = { + .name = "2.8V #2", + .boot_on = 1, + .always_on = 1, + .min_uV = 2800000, + .max_uV = 2800000, + }, +}; + +/* LDO6 is unused and unconnected */ + +/* LDO7 is used to supply 1.15V to the CPU */ +static struct regulator_init_data as3711_ldo7 = { + .constraints = { + .name = "1.15V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 1150000, + .max_uV = 1150000, + }, +}; + +/* LDO8 is switched parallel to LDO7, also set to 1.15V */ +static struct regulator_init_data as3711_ldo8 = { + .constraints = { + .name = "1.15V CPU #2", + .boot_on = 1, + .always_on = 1, + .min_uV = 1150000, + .max_uV = 1150000, + }, +}; + +static struct as3711_platform_data as3711_pdata = { + .regulator = { + .init_data = { + [AS3711_REGULATOR_SD_1] = &as3711_sd1, + [AS3711_REGULATOR_SD_2] = &as3711_sd2, + [AS3711_REGULATOR_SD_4] = &as3711_sd4, + [AS3711_REGULATOR_LDO_2] = &as3711_ldo2, + [AS3711_REGULATOR_LDO_3] = &as3711_ldo3, + [AS3711_REGULATOR_LDO_4] = &as3711_ldo4, + [AS3711_REGULATOR_LDO_5] = &as3711_ldo5, + [AS3711_REGULATOR_LDO_7] = &as3711_ldo7, + [AS3711_REGULATOR_LDO_8] = &as3711_ldo8, + }, + }, + .backlight = { + .su2_fb = "sh_mobile_lcdc_fb.0", + .su2_max_uA = 36000, + .su2_feedback = AS3711_SU2_CURR_AUTO, + .su2_fbprot = AS3711_SU2_GPIO4, + .su2_auto_curr1 = true, + .su2_auto_curr2 = true, + .su2_auto_curr3 = true, + }, +}; + static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, }; @@ -625,6 +760,11 @@ static struct i2c_board_info i2c0_devices[] = { I2C_BOARD_INFO("adxl34x", 0x1d), .irq = irq_pin(26), /* IRQ26 */ }, + { + I2C_BOARD_INFO("as3711", 0x40), + .irq = intcs_evt2irq(0x3300), /* IRQ24 */ + .platform_data = &as3711_pdata, + }, }; static struct i2c_board_info i2c1_devices[] = { @@ -715,59 +855,6 @@ static const struct pinctrl_map kzm_pinctrl_map[] = { "usb_vbus", "usb"), }; -/* - * FIXME - * - * This is quick hack for enabling LCDC backlight - */ -static int __init as3711_enable_lcdc_backlight(void) -{ - struct i2c_adapter *a = i2c_get_adapter(0); - struct i2c_msg msg; - int i, ret; - __u8 magic[] = { - 0x40, 0x2a, - 0x43, 0x3c, - 0x44, 0x3c, - 0x45, 0x3c, - 0x54, 0x03, - 0x51, 0x00, - 0x51, 0x01, - 0xff, 0x00, /* wait */ - 0x43, 0xf0, - 0x44, 0xf0, - 0x45, 0xf0, - }; - - if (!of_machine_is_compatible("renesas,kzm9g")) - return 0; - - if (!a) - return 0; - - msg.addr = 0x40; - msg.len = 2; - msg.flags = 0; - - for (i = 0; i < ARRAY_SIZE(magic); i += 2) { - msg.buf = magic + i; - - if (0xff == msg.buf[0]) { - udelay(500); - continue; - } - - ret = i2c_transfer(a, &msg, 1); - if (ret < 0) { - pr_err("i2c transfer fail\n"); - break; - } - } - - return 0; -} -device_initcall(as3711_enable_lcdc_backlight); - static void __init kzm_init(void) { regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers, diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 6114edd0a97..d73e21d3ea8 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -18,16 +18,59 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/interrupt.h> #include <linux/irqchip.h> #include <linux/kernel.h> +#include <linux/leds.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> #include <mach/common.h> #include <mach/r8a7790.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* LEDS */ +static struct gpio_led lager_leds[] = { + { + .name = "led8", + .gpio = RCAR_GP_PIN(5, 17), + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "led7", + .gpio = RCAR_GP_PIN(4, 23), + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "led6", + .gpio = RCAR_GP_PIN(4, 22), + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static __initdata struct gpio_led_platform_data lager_leds_pdata = { + .leds = lager_leds, + .num_leds = ARRAY_SIZE(lager_leds), +}; + +/* GPIO KEY */ +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1 } + +static __initdata struct gpio_keys_button gpio_buttons[] = { + GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), + GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), + GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), + GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"), +}; + +static __initdata struct gpio_keys_platform_data lager_keys_pdata = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + static const struct pinctrl_map lager_pinctrl_map[] = { /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", @@ -46,6 +89,12 @@ static void __init lager_add_standard_devices(void) r8a7790_pinmux_init(); r8a7790_add_standard_devices(); + platform_device_register_data(&platform_bus, "leds-gpio", -1, + &lager_leds_pdata, + sizeof(lager_leds_pdata)); + platform_device_register_data(&platform_bus, "gpio-keys", -1, + &lager_keys_pdata, + sizeof(lager_keys_pdata)); } static const char *lager_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b1b41b199f9..a7d1010505b 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_iid(0x3c), /* IRQ 1 */ + .start = irq_pin(1), /* IRQ 1 */ .flags = IORESOURCE_IRQ, }, }; @@ -231,6 +231,7 @@ static void __init marzen_init(void) pinctrl_register_mappings(marzen_pinctrl_map, ARRAY_SIZE(marzen_pinctrl_map)); r8a7779_pinmux_init(); + r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */ r8a7779_add_standard_devices(); r8a7779_add_usb_phy_device(&usb_phy_platform_data); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 947bd9eca07..7936d40a5c3 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,6 +9,7 @@ #include <linux/bug.h> #include <linux/string.h> #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> @@ -34,6 +35,11 @@ BIAS(in_pd, PIN_INPUT_PULLDOWN); BIAS(out_hi, PIN_OUTPUT_HIGH); BIAS(out_lo, PIN_OUTPUT_LOW); BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); + +BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0)); +BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1)); +BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0)); + /* These also force them into GPIO mode */ BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); @@ -42,8 +48,6 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); /* Sleep modes */ -BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| @@ -54,8 +58,6 @@ BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH| @@ -97,6 +99,252 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| #define DB8500_PIN_STATE(pin, conf, dev, state) \ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) +#define AB8500_MUX_HOG(group, func) \ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func) +#define AB8500_PIN_HOG(pin, conf) \ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf) + +#define AB8500_MUX_STATE(group, func, dev, state) \ + PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func) +#define AB8500_PIN_STATE(pin, conf, dev, state) \ + PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf) + +#define AB8505_MUX_HOG(group, func) \ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func) +#define AB8505_PIN_HOG(pin, conf) \ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf) + +#define AB8505_MUX_STATE(group, func, dev, state) \ + PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func) +#define AB8505_PIN_STATE(pin, conf, dev, state) \ + PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf) + +static struct pinctrl_map __initdata ab8500_pinmap[] = { + /* Sysclkreq2 */ + AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT), + AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT), + /* sysclkreq2 disable, mux in gpio configured in input pulldown */ + AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP), + AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP), + + /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */ + AB8500_MUX_HOG("gpio2_a_1", "gpio"), + AB8500_PIN_HOG("GPIO2_T9", in_pd), + + /* Sysclkreq4 */ + AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT), + AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT), + /* sysclkreq4 disable, mux in gpio configured in input pulldown */ + AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), + AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), + + /* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */ + AB8500_MUX_HOG("gpio4_a_1", "gpio"), + AB8500_PIN_HOG("GPIO4_W2", in_pd), + + /* + * pins 6,7,8 and 9 are muxed in YCBCR0123 + * configured in INPUT PULL UP + */ + AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"), + AB8500_PIN_HOG("GPIO6_Y18", in_nopull), + AB8500_PIN_HOG("GPIO7_AA20", in_nopull), + AB8500_PIN_HOG("GPIO8_W18", in_nopull), + AB8500_PIN_HOG("GPIO9_AA19", in_nopull), + + /* + * pins 10,11,12 and 13 are muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio10_d_1", "gpio"), + AB8500_PIN_HOG("GPIO10_U17", in_pd), + + AB8500_MUX_HOG("gpio11_d_1", "gpio"), + AB8500_PIN_HOG("GPIO11_AA18", in_pd), + + AB8500_MUX_HOG("gpio12_d_1", "gpio"), + AB8500_PIN_HOG("GPIO12_U16", in_pd), + + AB8500_MUX_HOG("gpio13_d_1", "gpio"), + AB8500_PIN_HOG("GPIO13_W17", in_pd), + + /* + * pins 14,15 are muxed in PWM1 and PWM2 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("pwmout1_d_1", "pwmout"), + AB8500_PIN_HOG("GPIO14_F14", in_pd), + + AB8500_MUX_HOG("pwmout2_d_1", "pwmout"), + AB8500_PIN_HOG("GPIO15_B17", in_pd), + + /* + * pins 16 is muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio16_a_1", "gpio"), + AB8500_PIN_HOG("GPIO14_F14", in_pd), + + /* + * pins 17,18,19 and 20 are muxed in AUDIO interface 1 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("adi1_d_1", "adi1"), + AB8500_PIN_HOG("GPIO17_P5", in_pd), + AB8500_PIN_HOG("GPIO18_R5", in_pd), + AB8500_PIN_HOG("GPIO19_U5", in_pd), + AB8500_PIN_HOG("GPIO20_T5", in_pd), + + /* + * pins 21,22 and 23 are muxed in USB UICC + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"), + AB8500_PIN_HOG("GPIO21_H19", in_pd), + AB8500_PIN_HOG("GPIO22_G20", in_pd), + AB8500_PIN_HOG("GPIO23_G19", in_pd), + + /* + * pins 24,25 are muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio24_a_1", "gpio"), + AB8500_PIN_HOG("GPIO24_T14", in_pd), + + AB8500_MUX_HOG("gpio25_a_1", "gpio"), + AB8500_PIN_HOG("GPIO25_R16", in_pd), + + /* + * pins 26 is muxed in GPIO + * configured in OUTPUT LOW + */ + AB8500_MUX_HOG("gpio26_d_1", "gpio"), + AB8500_PIN_HOG("GPIO26_M16", out_lo), + + /* + * pins 27,28 are muxed in DMIC12 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("dmic12_d_1", "dmic"), + AB8500_PIN_HOG("GPIO27_J6", in_pd), + AB8500_PIN_HOG("GPIO28_K6", in_pd), + + /* + * pins 29,30 are muxed in DMIC34 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("dmic34_d_1", "dmic"), + AB8500_PIN_HOG("GPIO29_G6", in_pd), + AB8500_PIN_HOG("GPIO30_H6", in_pd), + + /* + * pins 31,32 are muxed in DMIC56 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("dmic56_d_1", "dmic"), + AB8500_PIN_HOG("GPIO31_F5", in_pd), + AB8500_PIN_HOG("GPIO32_G5", in_pd), + + /* + * pins 34 is muxed in EXTCPENA + * configured INPUT PULL DOWN + */ + AB8500_MUX_HOG("extcpena_d_1", "extcpena"), + AB8500_PIN_HOG("GPIO34_R17", in_pd), + + /* + * pins 35 is muxed in GPIO + * configured in OUTPUT LOW + */ + AB8500_MUX_HOG("gpio35_d_1", "gpio"), + AB8500_PIN_HOG("GPIO35_W15", in_pd), + + /* + * pins 36,37,38 and 39 are muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio36_a_1", "gpio"), + AB8500_PIN_HOG("GPIO36_A17", in_pd), + + AB8500_MUX_HOG("gpio37_a_1", "gpio"), + AB8500_PIN_HOG("GPIO37_E15", in_pd), + + AB8500_MUX_HOG("gpio38_a_1", "gpio"), + AB8500_PIN_HOG("GPIO38_C17", in_pd), + + AB8500_MUX_HOG("gpio39_a_1", "gpio"), + AB8500_PIN_HOG("GPIO39_E16", in_pd), + + /* + * pins 40 and 41 are muxed in MODCSLSDA + * configured INPUT PULL DOWN + */ + AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"), + AB8500_PIN_HOG("GPIO40_T19", in_pd), + AB8500_PIN_HOG("GPIO41_U19", in_pd), + + /* + * pins 42 is muxed in GPIO + * configured INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio42_a_1", "gpio"), + AB8500_PIN_HOG("GPIO42_U2", in_pd), +}; + +static struct pinctrl_map __initdata ab8505_pinmap[] = { + /* Sysclkreq2 */ + AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT), + AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT), + /* sysclkreq2 disable, mux in gpio configured in input pulldown */ + AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), + AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), + + /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */ + AB8505_MUX_HOG("gpio2_a_1", "gpio"), + AB8505_PIN_HOG("GPIO2_R5", in_pd), + + /* Sysclkreq4 */ + AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT), + AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT), + /* sysclkreq4 disable, mux in gpio configured in input pulldown */ + AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP), + AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP), + + AB8505_MUX_HOG("gpio10_d_1", "gpio"), + AB8505_PIN_HOG("GPIO10_B16", in_pd), + + AB8505_MUX_HOG("gpio11_d_1", "gpio"), + AB8505_PIN_HOG("GPIO11_B17", in_pd), + + AB8505_MUX_HOG("gpio13_d_1", "gpio"), + AB8505_PIN_HOG("GPIO13_D17", in_nopull), + + AB8505_MUX_HOG("pwmout1_d_1", "pwmout"), + AB8505_PIN_HOG("GPIO14_C16", in_pd), + + AB8505_MUX_HOG("adi2_d_1", "adi2"), + AB8505_PIN_HOG("GPIO17_P2", in_pd), + AB8505_PIN_HOG("GPIO18_N3", in_pd), + AB8505_PIN_HOG("GPIO19_T1", in_pd), + AB8505_PIN_HOG("GPIO20_P3", in_pd), + + AB8505_MUX_HOG("gpio34_a_1", "gpio"), + AB8505_PIN_HOG("GPIO34_H14", in_pd), + + AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"), + AB8505_PIN_HOG("GPIO40_J15", in_pd), + AB8505_PIN_HOG("GPIO41_J14", in_pd), + + AB8505_MUX_HOG("gpio50_d_1", "gpio"), + AB8505_PIN_HOG("GPIO50_L4", in_nopull), + + AB8505_MUX_HOG("resethw_d_1", "resethw"), + AB8505_PIN_HOG("GPIO52_D16", in_pd), + + AB8505_MUX_HOG("service_d_1", "service"), + AB8505_PIN_HOG("GPIO53_D15", in_pd), +}; + /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { /* @@ -174,17 +422,12 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"), DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"), /* MSP1 for ALSA codec */ - DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), - DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), - DB8500_PIN("GPIO33_AF2", out_lo_slpm_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO34_AE1", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO35_AE2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO36_AG2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"), - /* MSP1 sleep state */ - DB8500_PIN_SLEEP("GPIO33_AF2", slpm_out_lo_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO34_AE1", slpm_in_nopull_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO35_AE2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO36_AG2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_MUX_HOG("msp1txrx_a_1", "msp1"), + DB8500_MUX_HOG("msp1_a_1", "msp1"), + DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup), + DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup), + DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup), + DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup), /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), @@ -821,6 +1064,12 @@ void __init mop500_pinmaps_init(void) pinctrl_register_mappings(mop500_pinmap, ARRAY_SIZE(mop500_pinmap)); mop500_href_family_pinmaps_init(); + if (machine_is_u8520()) + pinctrl_register_mappings(ab8505_pinmap, + ARRAY_SIZE(ab8505_pinmap)); + else + pinctrl_register_mappings(ab8500_pinmap, + ARRAY_SIZE(ab8500_pinmap)); } void __init snowball_pinmaps_init(void) @@ -831,6 +1080,8 @@ void __init snowball_pinmaps_init(void) ARRAY_SIZE(snowball_pinmap)); pinctrl_register_mappings(u8500_pinmap, ARRAY_SIZE(u8500_pinmap)); + pinctrl_register_mappings(ab8500_pinmap, + ARRAY_SIZE(ab8500_pinmap)); } void __init hrefv60_pinmaps_init(void) @@ -840,4 +1091,6 @@ void __init hrefv60_pinmaps_init(void) pinctrl_register_mappings(hrefv60_pinmap, ARRAY_SIZE(hrefv60_pinmap)); mop500_href_family_pinmaps_init(); + pinctrl_register_mappings(ab8500_pinmap, + ARRAY_SIZE(ab8500_pinmap)); } diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index d6b7c8556fa..0dc44c68342 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -999,7 +999,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), }; -/* Use the AB8500 init settings for AB8505 as they are the same right now */ struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { .reg_init = ab8505_reg_init, .num_reg_init = ARRAY_SIZE(ab8505_reg_init), diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 0ef38775a0c..43be3e0d4e3 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -52,11 +52,13 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi0_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 50000000, + .f_max = 100000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_MMC_HIGHSPEED, + MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_ERASE | + MMC_CAP_UHS_SDR12 | + MMC_CAP_UHS_SDR25, .gpio_wp = -1, .sigdir = MCI_ST_FBCLKEN | MCI_ST_CMDDIREN | @@ -106,8 +108,9 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { struct mmci_platform_data mop500_sdi1_data = { .ocr_mask = MMC_VDD_29_30, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_NONREMOVABLE, .gpio_cd = -1, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 @@ -143,9 +146,13 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE | + MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_ERASE | + MMC_CAP_CMD23, .gpio_cd = -1, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 @@ -180,10 +187,13 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi4_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE | + MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_ERASE | + MMC_CAP_CMD23, .gpio_cd = -1, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h index b2d7a0b9862..27399553c84 100644 --- a/arch/arm/mach-ux500/db8500-regs.h +++ b/arch/arm/mach-ux500/db8500-regs.h @@ -102,7 +102,6 @@ #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) #define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) -#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) @@ -184,7 +183,7 @@ #define U8500_IO_VIRTUAL 0xf0000000 #define U8500_IO_PHYSICAL 0xa0000000 /* This is where we map in the ROM to check ASIC IDs */ -#define UX500_VIRT_ROM 0xf0000000 +#define UX500_VIRT_ROM IOMEM(0xf0000000) /* This macro is used in assembly, so no cast */ #define IO_ADDRESS(x) \ diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 1cf94ce0fee..ddbdcda8306 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -227,7 +227,7 @@ static struct resource db8500_prcmu_res[] = { { .name = "prcmu-tcpm", .start = U8500_PRCMU_TCPM_BASE, - .end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1, + .end = U8500_PRCMU_TCPM_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 0d33d1a0695..392f2fdb37d 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -21,11 +21,11 @@ struct dbx500_asic_id dbx500_id; -static unsigned int ux500_read_asicid(phys_addr_t addr) +static unsigned int __init ux500_read_asicid(phys_addr_t addr) { phys_addr_t base = addr & ~0xfff; struct map_desc desc = { - .virtual = UX500_VIRT_ROM, + .virtual = (unsigned long)UX500_VIRT_ROM, .pfn = __phys_to_pfn(base), .length = SZ_16K, .type = MT_DEVICE, @@ -37,7 +37,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr) local_flush_tlb_all(); flush_cache_all(); - return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff))); + return readl(UX500_VIRT_ROM + (addr & 0xfff)); } static void ux500_print_soc_info(unsigned int asicid) |