aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt108
-rw-r--r--MAINTAINERS23
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/boot/dts/spear300-evb.dts38
-rw-r--r--arch/arm/boot/dts/spear300.dtsi5
-rw-r--r--arch/arm/boot/dts/spear310-evb.dts61
-rw-r--r--arch/arm/boot/dts/spear310.dtsi5
-rw-r--r--arch/arm/boot/dts/spear320-evb.dts61
-rw-r--r--arch/arm/boot/dts/spear320.dtsi7
-rw-r--r--arch/arm/boot/dts/tegra-cardhu.dts44
-rw-r--r--arch/arm/boot/dts/tegra-harmony.dts224
-rw-r--r--arch/arm/boot/dts/tegra-paz00.dts220
-rw-r--r--arch/arm/boot/dts/tegra-seaboard.dts243
-rw-r--r--arch/arm/boot/dts/tegra-trimslice.dts230
-rw-r--r--arch/arm/boot/dts/tegra-ventana.dts230
-rw-r--r--arch/arm/configs/nhk8815_defconfig1
-rw-r--r--arch/arm/mach-imx/Kconfig2
-rw-r--r--arch/arm/mach-imx/imx51-dt.c3
-rw-r--r--arch/arm/mach-imx/imx53-dt.c3
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c7
-rw-r--r--arch/arm/mach-imx/mm-imx1.c2
-rw-r--r--arch/arm/mach-imx/mm-imx21.c2
-rw-r--r--arch/arm/mach-imx/mm-imx25.c2
-rw-r--r--arch/arm/mach-imx/mm-imx27.c2
-rw-r--r--arch/arm/mach-imx/mm-imx3.c2
-rw-r--r--arch/arm/mach-imx/mm-imx5.c2
-rw-r--r--arch/arm/mach-mxs/Kconfig2
-rw-r--r--arch/arm/mach-mxs/include/mach/common.h2
-rw-r--r--arch/arm/mach-mxs/mach-apx4devkit.c2
-rw-r--r--arch/arm/mach-mxs/mach-m28evk.c2
-rw-r--r--arch/arm/mach-mxs/mach-mx23evk.c2
-rw-r--r--arch/arm/mach-mxs/mach-mx28evk.c2
-rw-r--r--arch/arm/mach-mxs/mach-stmp378x_devb.c2
-rw-r--r--arch/arm/mach-mxs/mach-tx28.c2
-rw-r--r--arch/arm/mach-mxs/mm.c11
-rw-r--r--arch/arm/mach-nomadik/Kconfig1
-rw-r--r--arch/arm/mach-spear3xx/Kconfig3
-rw-r--r--arch/arm/mach-spear3xx/include/mach/generic.h128
-rw-r--r--arch/arm/mach-spear3xx/spear300.c389
-rw-r--r--arch/arm/mach-spear3xx/spear310.c161
-rw-r--r--arch/arm/mach-spear3xx/spear320.c403
-rw-r--r--arch/arm/mach-spear3xx/spear3xx.c425
-rw-r--r--arch/arm/mach-tegra/Makefile3
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c31
-rw-r--r--arch/arm/mach-tegra/board-harmony-pinmux.c266
-rw-r--r--arch/arm/mach-tegra/board-paz00-pinmux.c263
-rw-r--r--arch/arm/mach-tegra/board-pinmux.c105
-rw-r--r--arch/arm/mach-tegra/board-pinmux.h40
-rw-r--r--arch/arm/mach-tegra/board-seaboard-pinmux.c346
-rw-r--r--arch/arm/mach-tegra/board-seaboard.c21
-rw-r--r--arch/arm/mach-tegra/board-trimslice-pinmux.c264
-rw-r--r--arch/arm/mach-tegra/board-trimslice.c15
-rw-r--r--arch/arm/mach-tegra/devices.c5
-rw-r--r--arch/arm/mach-tegra/include/mach/gpio-tegra.h9
-rw-r--r--arch/arm/mach-tegra/include/mach/pinmux-tegra20.h184
-rw-r--r--arch/arm/mach-tegra/include/mach/pinmux-tegra30.h320
-rw-r--r--arch/arm/mach-tegra/include/mach/pinmux.h302
-rw-r--r--arch/arm/mach-tegra/pinmux-tegra20-tables.c244
-rw-r--r--arch/arm/mach-tegra/pinmux-tegra30-tables.c376
-rw-r--r--arch/arm/mach-tegra/pinmux.c987
-rw-r--r--arch/arm/mach-tegra/usb_phy.c1
-rw-r--r--arch/arm/mach-ux500/Kconfig3
-rw-r--r--arch/arm/mach-ux500/Makefile3
-rw-r--r--arch/arm/mach-ux500/board-mop500-msp.c267
-rw-r--r--arch/arm/mach-ux500/board-mop500-msp.h14
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c733
-rw-r--r--arch/arm/mach-ux500/board-mop500.c99
-rw-r--r--arch/arm/mach-ux500/board-mop500.h10
-rw-r--r--arch/arm/mach-ux500/clock.c8
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c1
-rw-r--r--arch/arm/mach-ux500/cpu.c12
-rw-r--r--arch/arm/mach-ux500/devices-common.h12
-rw-r--r--arch/arm/mach-ux500/devices-db8500.h10
-rw-r--r--arch/arm/mach-ux500/include/mach/msp.h29
-rw-r--r--arch/arm/mach-ux500/pins-db8500.h72
-rw-r--r--arch/arm/plat-nomadik/include/plat/gpio-nomadik.h8
-rw-r--r--arch/arm/plat-nomadik/include/plat/pincfg.h32
-rw-r--r--arch/arm/plat-spear/Kconfig1
-rw-r--r--arch/arm/plat-spear/Makefile2
-rw-r--r--arch/arm/plat-spear/include/plat/padmux.h92
-rw-r--r--arch/arm/plat-spear/padmux.c164
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-tegra.c39
-rw-r--r--drivers/i2c/busses/i2c-imx.c8
-rw-r--r--drivers/i2c/busses/i2c-mxs.c6
-rw-r--r--drivers/mmc/host/mxs-mmc.c8
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c9
-rw-r--r--drivers/mmc/host/sdhci-tegra.c24
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c9
-rw-r--r--drivers/net/can/flexcan.c6
-rw-r--r--drivers/net/ethernet/freescale/fec.c9
-rw-r--r--drivers/pinctrl/Kconfig12
-rw-r--r--drivers/pinctrl/Makefile4
-rw-r--r--drivers/pinctrl/pinctrl-nomadik-db8500.c857
-rw-r--r--drivers/pinctrl/pinctrl-nomadik.c (renamed from drivers/gpio/gpio-nomadik.c)857
-rw-r--r--drivers/pinctrl/pinctrl-nomadik.h77
-rw-r--r--drivers/pinctrl/pinctrl-tegra.c236
-rw-r--r--drivers/pinctrl/pinctrl-tegra.h23
-rw-r--r--drivers/pinctrl/pinctrl-tegra20.c40
-rw-r--r--drivers/pinctrl/pinctrl-tegra30.c40
-rw-r--r--drivers/pinctrl/spear/Kconfig34
-rw-r--r--drivers/pinctrl/spear/Makefile7
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear.c354
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear.h142
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear300.c708
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear310.c431
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear320.c3468
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear3xx.c588
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear3xx.h92
-rw-r--r--drivers/spi/spi-imx.c8
-rw-r--r--drivers/tty/serial/amba-pl011.c8
-rw-r--r--drivers/tty/serial/imx.c8
-rw-r--r--drivers/tty/serial/mxs-auart.c8
-rw-r--r--drivers/usb/host/ehci-tegra.c13
-rw-r--r--drivers/video/mxsfb.c9
-rw-r--r--include/linux/pinctrl/pinctrl-state.h13
-rw-r--r--include/linux/platform_data/tegra_usb.h1
-rw-r--r--sound/soc/mxs/mxs-saif.c8
118 files changed, 10999 insertions, 5588 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
new file mode 100644
index 00000000000..3664d37e679
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -0,0 +1,108 @@
+ST Microelectronics, SPEAr pinmux controller
+
+Required properties:
+- compatible : "st,spear300-pinmux"
+ : "st,spear310-pinmux"
+ : "st,spear320-pinmux"
+- reg : Address range of the pinctrl registers
+- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
+ - Its values for SPEAr300:
+ - NAND_MODE : <0>
+ - NOR_MODE : <1>
+ - PHOTO_FRAME_MODE : <2>
+ - LEND_IP_PHONE_MODE : <3>
+ - HEND_IP_PHONE_MODE : <4>
+ - LEND_WIFI_PHONE_MODE : <5>
+ - HEND_WIFI_PHONE_MODE : <6>
+ - ATA_PABX_WI2S_MODE : <7>
+ - ATA_PABX_I2S_MODE : <8>
+ - CAML_LCDW_MODE : <9>
+ - CAMU_LCD_MODE : <10>
+ - CAMU_WLCD_MODE : <11>
+ - CAML_LCD_MODE : <12>
+ - Its values for SPEAr320:
+ - AUTO_NET_SMII_MODE : <0>
+ - AUTO_NET_MII_MODE : <1>
+ - AUTO_EXP_MODE : <2>
+ - SMALL_PRINTERS_MODE : <3>
+ - EXTENDED_MODE : <4>
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+of these subnodes represents muxing for a pin, a group, or a list of pins or
+groups.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required subnode-properties:
+- st,pins : An array of strings. Each string contains the name of a pin or
+ group.
+- st,function: A string containing the name of the function to mux to the pin or
+ group. See the SPEAr's TRM to determine which are valid for each pin or group.
+
+ Valid values for group and function names can be found from looking at the
+ group and function arrays in driver files:
+ drivers/pinctrl/spear/pinctrl-spear3*0.c
+
+Valid values for group names are:
+For All SPEAr3xx machines:
+ "firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp",
+ "gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp",
+ "gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp",
+ "timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp"
+
+For SPEAr300 machines:
+ "fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp",
+ "clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp",
+ "dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp",
+ "gpio1_0_to_3_grp", "gpio1_4_to_7_grp"
+
+For SPEAr310 machines:
+ "emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp",
+ "uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp"
+
+For SPEAr320 machines:
+ "clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp",
+ "sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp",
+ "uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp",
+ "uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp",
+ "uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp",
+ "uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp",
+ "uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp",
+ "uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp",
+ "uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp",
+ "uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp",
+ "uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp",
+ "can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp",
+ "pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp",
+ "pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp",
+ "pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp",
+ "pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp",
+ "pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp",
+ "pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp",
+ "ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp",
+ "ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp",
+ "ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp",
+ "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
+ "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
+
+Valid values for function names are:
+For All SPEAr3xx machines:
+ "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
+ "uart0", "timer_0_1", "timer_2_3"
+
+For SPEAr300 machines:
+ "fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1"
+
+For SPEAr310 machines:
+ "emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0",
+ "rs485_1", "tdm"
+
+For SPEAr320 machines:
+ "clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem",
+ "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
+ "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
+ "mii0_1", "i2c1", "i2c2"
diff --git a/MAINTAINERS b/MAINTAINERS
index 1a4bf92495b..17360c7ac27 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5240,6 +5240,14 @@ M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: drivers/pinctrl/
+PIN CONTROLLER - ST SPEAR
+M: Viresh Kumar <viresh.kumar@st.com>
+L: spear-devel@list.st.com
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.st.com/spear
+S: Maintained
+F: driver/pinctrl/spear/
+
PKTCDVD DRIVER
M: Peter Osterlund <petero2@telia.com>
S: Maintained
@@ -6344,21 +6352,6 @@ F: arch/arm/mach-spear*/clock.c
F: arch/arm/plat-spear/clock.c
F: arch/arm/plat-spear/include/plat/clock.h
-SPEAR PAD MULTIPLEXING SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
-L: spear-devel@list.st.com
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.st.com/spear
-S: Maintained
-F: arch/arm/plat-spear/include/plat/padmux.h
-F: arch/arm/plat-spear/padmux.c
-F: arch/arm/mach-spear*/spear*xx.c
-F: arch/arm/mach-spear*/include/mach/generic.h
-F: arch