diff options
-rw-r--r-- | arch/powerpc/include/asm/mmu.h | 12 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_40x.S | 6 | ||||
-rw-r--r-- | arch/powerpc/kernel/paca.c | 2 | ||||
-rw-r--r-- | arch/powerpc/kernel/prom.c | 29 | ||||
-rw-r--r-- | arch/powerpc/kernel/rtas.c | 2 | ||||
-rw-r--r-- | arch/powerpc/kernel/setup_64.c | 2 | ||||
-rw-r--r-- | arch/powerpc/mm/40x_mmu.c | 14 | ||||
-rw-r--r-- | arch/powerpc/mm/44x_mmu.c | 14 | ||||
-rw-r--r-- | arch/powerpc/mm/fsl_booke_mmu.c | 9 | ||||
-rw-r--r-- | arch/powerpc/mm/hash_utils_64.c | 22 | ||||
-rw-r--r-- | arch/powerpc/mm/init_32.c | 14 | ||||
-rw-r--r-- | arch/powerpc/mm/init_64.c | 1 | ||||
-rw-r--r-- | arch/powerpc/mm/ppc_mmu_32.c | 15 | ||||
-rw-r--r-- | arch/powerpc/mm/tlb_nohash.c | 14 | ||||
-rw-r--r-- | include/linux/memblock.h | 1 | ||||
-rw-r--r-- | mm/memblock.c | 8 |
16 files changed, 125 insertions, 40 deletions
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 7ebf42ed84a..bb40a06d3b7 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -2,6 +2,8 @@ #define _ASM_POWERPC_MMU_H_ #ifdef __KERNEL__ +#include <linux/types.h> + #include <asm/asm-compat.h> #include <asm/feature-fixups.h> @@ -82,6 +84,16 @@ extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup; extern void early_init_mmu(void); extern void early_init_mmu_secondary(void); +extern void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size); + +#ifdef CONFIG_PPC64 +/* This is our real memory area size on ppc64 server, on embedded, we + * make it match the size our of bolted TLB area + */ +extern u64 ppc64_rma_size; +#endif /* CONFIG_PPC64 */ + #endif /* !__ASSEMBLY__ */ /* The kernel use the constants below to index in the page sizes array. diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index a90625f9b48..8278e8bad5a 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -923,11 +923,7 @@ initial_mmu: mtspr SPRN_PID,r0 sync - /* Configure and load two entries into TLB slots 62 and 63. - * In case we are pinning TLBs, these are reserved in by the - * other TLB functions. If not reserving, then it doesn't - * matter where they are loaded. - */ + /* Configure and load one entry into TLB slots 63 */ clrrwi r4,r4,10 /* Mask off the real page number */ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 139a773853f..b9ffd7deeed 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -117,7 +117,7 @@ void __init allocate_pacas(void) * the first segment. On iSeries they must be within the area mapped * by the HV, which is HvPagesToMap * HVPAGESIZE bytes. */ - limit = min(0x10000000ULL, memblock.rmo_size); + limit = min(0x10000000ULL, ppc64_rma_size); if (firmware_has_feature(FW_FEATURE_ISERIES)) limit = min(limit, HvPagesToMap * HVPAGESIZE); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3aec0b980f6..c3c6a885754 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -66,6 +66,7 @@ int __initdata iommu_is_off; int __initdata iommu_force_on; unsigned long tce_alloc_start, tce_alloc_end; +u64 ppc64_rma_size; #endif static int __init early_parse_mem(char *p) @@ -492,7 +493,7 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node, void __init early_init_dt_add_memory_arch(u64 base, u64 size) { -#if defined(CONFIG_PPC64) +#ifdef CONFIG_PPC64 if (iommu_is_off) { if (base >= 0x80000000ul) return; @@ -501,9 +502,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) } #endif - memblock_add(base, size); - + /* First MEMBLOCK added, do some special initializations */ + if (memstart_addr == ~(phys_addr_t)0) + setup_initial_memory_limit(base, size); memstart_addr = min((u64)memstart_addr, base); + + /* Add the chunk to the MEMBLOCK list */ + memblock_add(base, size); } u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) @@ -655,22 +660,6 @@ static void __init phyp_dump_reserve_mem(void) static inline void __init phyp_dump_reserve_mem(void) {} #endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ -static void set_boot_memory_limit(void) -{ -#ifdef CONFIG_PPC32 - /* 601 can only access 16MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 1) - memblock_set_current_limit(0x01000000); - /* 8xx can only access 8MB at the moment */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) - memblock_set_current_limit(0x00800000); - else - memblock_set_current_limit(0x10000000); -#else - memblock_set_current_limit(memblock.rmo_size); -#endif -} - void __init early_init_devtree(void *params) { phys_addr_t limit; @@ -734,8 +723,6 @@ void __init early_init_devtree(void *params) DBG("Phys. mem: %llx\n", memblock_phys_mem_size()); - set_boot_memory_limit(); - /* We may need to relocate the flat tree, do it now. * FIXME .. and the initrd too? */ move_device_tree(); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index d0516dbee76..1662777be5d 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -934,7 +934,7 @@ void __init rtas_initialize(void) */ #ifdef CONFIG_PPC64 if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) { - rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX); + rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX); ibm_suspend_me_token = rtas_token("ibm,suspend-me"); } #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index d135f93cb0f..4360944b60f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -487,7 +487,7 @@ static void __init emergency_stack_init(void) * bringup, we need to get at them in real mode. This means they * must also be within the RMO region. */ - limit = min(slb0_limit(), memblock.rmo_size); + limit = min(slb0_limit(), ppc64_rma_size); for_each_possible_cpu(i) { unsigned long sp; diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 58969b51f45..5810967511d 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -141,7 +141,19 @@ unsigned long __init mmu_mapin_ram(unsigned long top) * coverage with normal-sized pages (or other reasons) do not * attempt to allocate outside the allowed range. */ - memblock_set_current_limit(memstart_addr + mapped); + memblock_set_current_limit(mapped); return mapped; } + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 40x can only access 16MB at the moment (see head_40x.S) */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); +} diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index d8c6efb32bc..024acab588f 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -24,6 +24,8 @@ */ #include <linux/init.h> +#include <linux/memblock.h> + #include <asm/mmu.h> #include <asm/system.h> #include <asm/page.h> @@ -213,6 +215,18 @@ unsigned long __init mmu_mapin_ram(unsigned long top) return total_lowmem; } +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 44x has a 256M TLB entry pinned at boot */ + memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE)); +} + #ifdef CONFIG_SMP void __cpuinit mmu_init_secondary(int cpu) { diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index e525f862d75..0be8fe24c54 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -215,3 +215,12 @@ void __init adjust_total_lowmem(void) memblock_set_current_limit(memstart_addr + __max_low_memory); } + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + phys_addr_t limit = first_memblock_base + first_memblock_size; + + /* 64M mapped initially according to head_fsl_booke.S */ + memblock_set_current_limit(min_t(u64, limit, 0x04000000)); +} diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index b05890e2381..83f534d862d 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -649,7 +649,7 @@ static void __init htab_initialize(void) #ifdef CONFIG_DEBUG_PAGEALLOC linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT; linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count, - 1, memblock.rmo_size)); + 1, ppc64_rma_size)); memset(linear_map_hash_slots, 0, linear_map_hash_count); #endif /* CONFIG_DEBUG_PAGEALLOC */ @@ -1248,3 +1248,23 @@ void kernel_map_pages(struct page *page, int numpages, int enable) local_irq_restore(flags); } #endif /* CONFIG_DEBUG_PAGEALLOC */ + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* On LPAR systems, the first entry is our RMA region, + * non-LPAR 64-bit hash MMU systems don't have a limitation + * on real mode access, but using the first entry works well + * enough. We also clamp it to 1G to avoid some funky things + * such as RTAS bugs etc... + */ + ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); + + /* Finally limit subsequent allocations */ + memblock_set_current_limit(ppc64_rma_size); +} diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 59b208b7ec6..742da43b4ab 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -237,3 +237,17 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif + +#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */ +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 8xx can only access 8MB at the moment */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); +} +#endif /* CONFIG_8xx */ diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 71f1415e247..9e081ffbf0f 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -328,3 +328,4 @@ int __meminit vmemmap_populate(struct page *start_page, return 0; } #endif /* CONFIG_SPARSEMEM_VMEMMAP */ + diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 7d34e170e80..11571e11883 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -271,3 +271,18 @@ void __init MMU_init_hw(void) if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205); } + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 601 can only access 16MB at the moment */ + if (PVR_VER(mfspr(SPRN_PVR)) == 1) + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01000000)); + else /* Anything else has 256M mapped */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x10000000)); +} diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 7ba32e76299..a086ed56260 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -446,4 +446,18 @@ void __cpuinit early_init_mmu_secondary(void) __early_init_mmu(0); } +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* On Embedded 64-bit, we adjust the RMA size to match + * the bolted TLB entry. We know for now that only 1G + * entries are supported though that may eventually + * change. We crop it to the size of the first MEMBLOCK to + * avoid going over total available memory just in case... + */ + ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); + + /* Finally limit subsequent allocations */ + memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size); +} #endif /* CONFIG_PPC64 */ diff --git a/include/linux/memblock.h b/include/linux/memblock.h index c4f6e53264e..71b8edc6ede 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -33,7 +33,6 @@ struct memblock_type { struct memblock { unsigned long debug; - u64 rmo_size; u64 current_limit; struct memblock_type memory; struct memblock_type reserved; diff --git a/mm/memblock.c b/mm/memblock.c index 770c5bfac2c..73d903ebf3d 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -49,7 +49,6 @@ void memblock_dump_all(void) return; pr_info("MEMBLOCK configuration:\n"); - pr_info(" rmo_size = 0x%llx\n", (unsigned long long)memblock.rmo_size); pr_info(" memory.size = 0x%llx\n", (unsigned long long)memblock.memory.size); memblock_dump(&memblock.memory, "memory"); @@ -195,10 +194,6 @@ static long memblock_add_region(struct memblock_type *type, u64 base, u64 size) long memblock_add(u64 base, u64 size) { - /* On pSeries LPAR systems, the first MEMBLOCK is our RMO region. */ - if (base == 0) - memblock.rmo_size = size; - return memblock_add_region(&memblock.memory, base, size); } @@ -459,9 +454,6 @@ void __init memblock_enforce_memory_limit(u64 memory_limit) break; } - if (memblock.memory.regions[0].size < memblock.rmo_size) - memblock.rmo_size = memblock.memory.regions[0].size; - memory_limit = memblock_end_of_DRAM(); /* And truncate any reserves above the limit also. */ |