aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/Kconfig1
-rw-r--r--drivers/net/bnx2x.h15
-rw-r--r--drivers/net/bnx2x_fw_file_hdr.h37
-rw-r--r--drivers/net/bnx2x_init.h605
-rw-r--r--drivers/net/bnx2x_init_ops.h442
-rw-r--r--drivers/net/bnx2x_main.c343
-rw-r--r--firmware/Makefile1
-rw-r--r--firmware/WHENCE20
8 files changed, 866 insertions, 598 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3320e776157..bc7eef12d95 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2676,6 +2676,7 @@ config TEHUTI
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
+ select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
help
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a329bee2555..8678457849f 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -965,6 +965,21 @@ struct bnx2x {
int gunzip_outlen;
#define FW_BUF_SIZE 0x8000
+ struct raw_op *init_ops;
+ /* Init blocks offsets inside init_ops */
+ u16 *init_ops_offsets;
+ /* Data blob - has 32 bit granularity */
+ u32 *init_data;
+ /* Zipped PRAM blobs - raw data */
+ const u8 *tsem_int_table_data;
+ const u8 *tsem_pram_data;
+ const u8 *usem_int_table_data;
+ const u8 *usem_pram_data;
+ const u8 *xsem_int_table_data;
+ const u8 *xsem_pram_data;
+ const u8 *csem_int_table_data;
+ const u8 *csem_pram_data;
+ const struct firmware *firmware;
};
diff --git a/drivers/net/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x_fw_file_hdr.h
new file mode 100644
index 00000000000..3f5ee5d7cc2
--- /dev/null
+++ b/drivers/net/bnx2x_fw_file_hdr.h
@@ -0,0 +1,37 @@
+/* bnx2x_fw_file_hdr.h: FW binary file header structure.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ * Based on the original idea of John Wright <john.wright@hp.com>.
+ */
+
+#ifndef BNX2X_INIT_FILE_HDR_H
+#define BNX2X_INIT_FILE_HDR_H
+
+struct bnx2x_fw_file_section {
+ __be32 len;
+ __be32 offset;
+};
+
+struct bnx2x_fw_file_hdr {
+ struct bnx2x_fw_file_section init_ops;
+ struct bnx2x_fw_file_section init_ops_offsets;
+ struct bnx2x_fw_file_section init_data;
+ struct bnx2x_fw_file_section tsem_int_table_data;
+ struct bnx2x_fw_file_section tsem_pram_data;
+ struct bnx2x_fw_file_section usem_int_table_data;
+ struct bnx2x_fw_file_section usem_pram_data;
+ struct bnx2x_fw_file_section csem_int_table_data;
+ struct bnx2x_fw_file_section csem_pram_data;
+ struct bnx2x_fw_file_section xsem_int_table_data;
+ struct bnx2x_fw_file_section xsem_pram_data;
+ struct bnx2x_fw_file_section fw_version;
+};
+
+#endif /* BNX2X_INIT_FILE_HDR_H */
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 39ba2936c0c..3ba4d888068 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,4 +1,5 @@
/* bnx2x_init.h: Broadcom Everest network driver.
+ * Structures and macroes needed during the initialization.
*
* Copyright (c) 2007-2009 Broadcom Corporation
*
@@ -8,6 +9,7 @@
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Eliezer Tamir
+ * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
*/
#ifndef BNX2X_INIT_H
@@ -45,33 +47,71 @@
#define OP_WR_64 0x8 /* write 64 bit pattern */
#define OP_WB 0x9 /* copy a string using DMAE */
-/* Operation specific for E1 */
-#define OP_RD_E1 0xa /* read single register */
-#define OP_WR_E1 0xb /* write single register */
-#define OP_IW_E1 0xc /* write single register using mailbox */
-#define OP_SW_E1 0xd /* copy a string to the device */
-#define OP_SI_E1 0xe /* copy a string using mailbox */
-#define OP_ZR_E1 0xf /* clear memory */
-#define OP_ZP_E1 0x10 /* unzip then copy with DMAE */
-#define OP_WR_64_E1 0x11 /* write 64 bit pattern on E1 */
-#define OP_WB_E1 0x12 /* copy a string using DMAE */
-
-/* Operation specific for E1H */
-#define OP_RD_E1H 0x13 /* read single register */
-#define OP_WR_E1H 0x14 /* write single register */
-#define OP_IW_E1H 0x15 /* write single register using mailbox */
-#define OP_SW_E1H 0x16 /* copy a string to the device */
-#define OP_SI_E1H 0x17 /* copy a string using mailbox */
-#define OP_ZR_E1H 0x18 /* clear memory */
-#define OP_ZP_E1H 0x19 /* unzip then copy with DMAE */
-#define OP_WR_64_E1H 0x1a /* write 64 bit pattern on E1H */
-#define OP_WB_E1H 0x1b /* copy a string using DMAE */
-
/* FPGA and EMUL specific operations */
-#define OP_WR_EMUL_E1H 0x1c /* write single register on E1H Emul */
-#define OP_WR_EMUL 0x1d /* write single register on Emulation */
-#define OP_WR_FPGA 0x1e /* write single register on FPGA */
-#define OP_WR_ASIC 0x1f /* write single register on ASIC */
+#define OP_WR_EMUL 0xa /* write single register on Emulation */
+#define OP_WR_FPGA 0xb /* write single register on FPGA */
+#define OP_WR_ASIC 0xc /* write single register on ASIC */
+
+/* Init stages */
+#define COMMON_STAGE 0
+#define PORT0_STAGE 1
+#define PORT1_STAGE 2
+/* Never reorder FUNCx stages !!! */
+#define FUNC0_STAGE 3
+#define FUNC1_STAGE 4
+#define FUNC2_STAGE 5
+#define FUNC3_STAGE 6
+#define FUNC4_STAGE 7
+#define FUNC5_STAGE 8
+#define FUNC6_STAGE 9
+#define FUNC7_STAGE 10
+#define STAGE_IDX_MAX 11
+
+#define STAGE_START 0
+#define STAGE_END 1
+
+
+/* Indices of blocks */
+#define PRS_BLOCK 0
+#define SRCH_BLOCK 1
+#define TSDM_BLOCK 2
+#define TCM_BLOCK 3
+#define BRB1_BLOCK 4
+#define TSEM_BLOCK 5
+#define PXPCS_BLOCK 6
+#define EMAC0_BLOCK 7
+#define EMAC1_BLOCK 8
+#define DBU_BLOCK 9
+#define MISC_BLOCK 10
+#define DBG_BLOCK 11
+#define NIG_BLOCK 12
+#define MCP_BLOCK 13
+#define UPB_BLOCK 14
+#define CSDM_BLOCK 15
+#define USDM_BLOCK 16
+#define CCM_BLOCK 17
+#define UCM_BLOCK 18
+#define USEM_BLOCK 19
+#define CSEM_BLOCK 20
+#define XPB_BLOCK 21
+#define DQ_BLOCK 22
+#define TIMERS_BLOCK 23
+#define XSDM_BLOCK 24
+#define QM_BLOCK 25
+#define PBF_BLOCK 26
+#define XCM_BLOCK 27
+#define XSEM_BLOCK 28
+#define CDU_BLOCK 29
+#define DMAE_BLOCK 30
+#define PXP_BLOCK 31
+#define CFC_BLOCK 32
+#define HC_BLOCK 33
+#define PXP2_BLOCK 34
+#define MISC_AEU_BLOCK 35
+
+/* Returns the index of start or end of a specific block stage in ops array*/
+#define BLOCK_OPS_IDX(block, stage, end) \
+ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
struct raw_op {
@@ -118,292 +158,6 @@ union init_op {
struct raw_op raw;
};
-#include "bnx2x_init_values.h"
-
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len);
-
-static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
- u32 len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- REG_WR(bp, addr + i*4, data[i]);
- if (!(i % 10000)) {
- touch_softlockup_watchdog();
- cpu_relax();
- }
- }
-}
-
-static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
- u16 len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- REG_WR_IND(bp, addr + i*4, data[i]);
- if (!(i % 10000)) {
- touch_softlockup_watchdog();
- cpu_relax();
- }
- }
-}
-
-static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
-{
- int offset = 0;
-
- if (bp->dmae_ready) {
- while (len > DMAE_LEN32_WR_MAX) {
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, DMAE_LEN32_WR_MAX);
- offset += DMAE_LEN32_WR_MAX * 4;
- len -= DMAE_LEN32_WR_MAX;
- }
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, len);
- } else
- bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
-{
- u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
- u32 buf_len32 = buf_len / 4;
- int i;
-
- memset(bp->gunzip_buf, fill, buf_len);
-
- for (i = 0; i < len; i += buf_len32) {
- u32 cur_len = min(buf_len32, len - i);
-
- bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
- }
-}
-
-static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
- u32 len64)
-{
- u32 buf_len32 = FW_BUF_SIZE / 4;
- u32 len = len64 * 2;
- u64 data64 = 0;
- int i;
-
- /* 64 bit value is in a blob: first low DWORD, then high DWORD */
- data64 = HILO_U64((*(data + 1)), (*data));
- len64 = min((u32)(FW_BUF_SIZE/8), len64);
- for (i = 0; i < len64; i++) {
- u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
-
- *pdata = data64;
- }
-
- for (i = 0; i < len; i += buf_len32) {
- u32 cur_len = min(buf_len32, len - i);
-
- bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
- }
-}
-
-/*********************************************************
- There are different blobs for each PRAM section.
- In addition, each blob write operation is divided into a few operations
- in order to decrease the amount of phys. contiguous buffer needed.
- Thus, when we select a blob the address may be with some offset
- from the beginning of PRAM section.
- The same holds for the INT_TABLE sections.
-**********************************************************/
-#define IF_IS_INT_TABLE_ADDR(base, addr) \
- if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
-
-#define IF_IS_PRAM_ADDR(base, addr) \
- if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
-
-static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)
-{
- IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
- data = is_e1 ? tsem_int_table_data_e1 :
- tsem_int_table_data_e1h;
- else
- IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
- data = is_e1 ? csem_int_table_data_e1 :
- csem_int_table_data_e1h;
- else
- IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
- data = is_e1 ? usem_int_table_data_e1 :
- usem_int_table_data_e1h;
- else
- IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
- data = is_e1 ? xsem_int_table_data_e1 :
- xsem_int_table_data_e1h;
- else
- IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
- data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
- else
- IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
- data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
- else
- IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
- data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
- else
- IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
- data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
-
- return data;
-}
-
-static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
- u32 len, int gunzip, int is_e1, u32 blob_off)
-{
- int offset = 0;
-
- data = bnx2x_sel_blob(addr, data, is_e1) + blob_off;
-
- if (gunzip) {
- int rc;
-#ifdef __BIG_ENDIAN
- int i, size;
- u32 *temp;
-
- temp = kmalloc(len, GFP_KERNEL);
- size = (len / 4) + ((len % 4) ? 1 : 0);
- for (i = 0; i < size; i++)
- temp[i] = swab32(data[i]);
- data = temp;
-#endif
- rc = bnx2x_gunzip(bp, (u8 *)data, len);
- if (rc) {
- BNX2X_ERR("gunzip failed ! rc %d\n", rc);
-#ifdef __BIG_ENDIAN
- kfree(temp);
-#endif
- return;
- }
- len = bp->gunzip_outlen;
-#ifdef __BIG_ENDIAN
- kfree(temp);
- for (i = 0; i < len; i++)
- ((u32 *)bp->gunzip_buf)[i] =
- swab32(((u32 *)bp->gunzip_buf)[i]);
-#endif
- } else {
- if ((len * 4) > FW_BUF_SIZE) {
- BNX2X_ERR("LARGE DMAE OPERATION ! "
- "addr 0x%x len 0x%x\n", addr, len*4);
- return;
- }
- memcpy(bp->gunzip_buf, data, len * 4);
- }
-
- if (bp->dmae_ready) {
- while (len > DMAE_LEN32_WR_MAX) {
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, DMAE_LEN32_WR_MAX);
- offset += DMAE_LEN32_WR_MAX * 4;
- len -= DMAE_LEN32_WR_MAX;
- }
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, len);
- } else
- bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
-{
- int is_e1 = CHIP_IS_E1(bp);
- int is_e1h = CHIP_IS_E1H(bp);
- int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h);
- int hw_wr, i;
- union init_op *op;
- u32 op_type, addr, len;
- const u32 *data, *data_base;
-
- if (CHIP_REV_IS_FPGA(bp))
- hw_wr = OP_WR_FPGA;
- else if (CHIP_REV_IS_EMUL(bp))
- hw_wr = OP_WR_EMUL;
- else
- hw_wr = OP_WR_ASIC;
-
- if (is_e1)
- data_base = init_data_e1;
- else /* CHIP_IS_E1H(bp) */
- data_base = init_data_e1h;
-
- for (i = op_start; i < op_end; i++) {
-
- op = (union init_op *)&(init_ops[i]);
-
- op_type = op->str_wr.op;
- addr = op->str_wr.offset;
- len = op->str_wr.data_len;
- data = data_base + op->str_wr.data_off;
-
- /* careful! it must be in order */
- if (unlikely(op_type > OP_WB)) {
-
- /* If E1 only */
- if (op_type <= OP_WB_E1) {
- if (is_e1)
- op_type -= (OP_RD_E1 - OP_RD);
-
- /* If E1H only */
- } else if (op_type <= OP_WB_E1H) {
- if (is_e1h)
- op_type -= (OP_RD_E1H - OP_RD);
- }
-
- /* HW/EMUL specific */
- if (op_type == hw_wr)
- op_type = OP_WR;
-
- /* EMUL on E1H is special */
- if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h)
- op_type = OP_WR;
- }
-
- switch (op_type) {
- case OP_RD:
- REG_RD(bp, addr);
- break;
- case OP_WR:
- REG_WR(bp, addr, op->write.val);
- break;
- case OP_SW:
- bnx2x_init_str_wr(bp, addr, data, len);
- break;
- case OP_WB:
- bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0);
- break;
- case OP_SI:
- bnx2x_init_ind_wr(bp, addr, data, len);
- break;
- case OP_ZR:
- bnx2x_init_fill(bp, addr, 0, op->zero.len);
- break;
- case OP_ZP:
- bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1,
- op->str_wr.data_off);
- break;
- case OP_WR_64:
- bnx2x_init_wr_64(bp, addr, data, len);
- break;
- default:
- /* happens whenever an op is of a diff HW */
-#if 0
- DP(NETIF_MSG_HW, "skipping init operation "
- "index %d[%d:%d]: type %d addr 0x%x "
- "len %d(0x%x)\n",
- i, op_start, op_end, op_type, addr, len, len);
-#endif
- break;
- }
- }
-}
-
-
/****************************************************************************
* PXP
****************************************************************************/
@@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
PXP2_REG_RQ_BW_WR_UBOUND30}
};
-static void bnx2x_init_pxp(struct bnx2x *bp)
-{
- u16 devctl;
- int r_order, w_order;
- u32 val, i;
-
- pci_read_config_word(bp->pdev,
- bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
- DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
- w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
- if (bp->mrrs == -1)
- r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
- else {
- DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
- r_order = bp->mrrs;
- }
-
- if (r_order > MAX_RD_ORD) {
- DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n",
- r_order, MAX_RD_ORD);
- r_order = MAX_RD_ORD;
- }
- if (w_order > MAX_WR_ORD) {
- DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n",
- w_order, MAX_WR_ORD);
- w_order = MAX_WR_ORD;
- }
- if (CHIP_REV_IS_FPGA(bp)) {
- DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
- w_order = 0;
- }
- DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order);
-
- for (i = 0; i < NUM_RD_Q-1; i++) {
- REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
- REG_WR(bp, read_arb_addr[i].add,
- read_arb_data[i][r_order].add);
- REG_WR(bp, read_arb_addr[i].ubound,
- read_arb_data[i][r_order].ubound);
- }
-
- for (i = 0; i < NUM_WR_Q-1; i++) {
- if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
- (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
-
- REG_WR(bp, write_arb_addr[i].l,
- write_arb_data[i][w_order].l);
-
- REG_WR(bp, write_arb_addr[i].add,
- write_arb_data[i][w_order].add);
-
- REG_WR(bp, write_arb_addr[i].ubound,
- write_arb_data[i][w_order].ubound);
- } else {
-
- val = REG_RD(bp, write_arb_addr[i].l);
- REG_WR(bp, write_arb_addr[i].l,
- val | (write_arb_data[i][w_order].l << 10));
-
- val = REG_RD(bp, write_arb_addr[i].add);
- REG_WR(bp, write_arb_addr[i].add,
- val | (write_arb_data[i][w_order].add << 10));
-
- val = REG_RD(bp, write_arb_addr[i].ubound);
- REG_WR(bp, write_arb_addr[i].ubound,
- val | (write_arb_data[i][w_order].ubound << 7));
- }
- }
-
- val = write_arb_data[NUM_WR_Q-1][w_order].add;
- val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
- val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
- REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
-
- val = read_arb_data[NUM_RD_Q-1][r_order].add;
- val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
- val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
- REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
-
- REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
- REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
- REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
- REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
-
- if (r_order == MAX_RD_ORD)
- REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
-
- REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
-
- if (CHIP_IS_E1H(bp)) {
- val = ((w_order == 0) ? 2 : 3);
- REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
- REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
- REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
- REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
- REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
- }
-}
-
/****************************************************************************
* CDU
@@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
(0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
-/*****************************************************************************
- * Description:
- * Calculates crc 8 on a word value: polynomial 0-1-2-8
- * Code was translated from Verilog.
- ****************************************************************************/
-static u8 calc_crc8(u32 data, u8 crc)
-{
- u8 D[32];
- u8 NewCRC[8];
- u8 C[8];
- u8 crc_res;
- u8 i;
-
- /* split the data into 31 bits */
- for (i = 0; i < 32; i++) {
- D[i] = data & 1;
- data = data >> 1;
- }
-
- /* split the crc into 8 bits */
- for (i = 0; i < 8; i++) {
- C[i] = crc & 1;
- crc = crc >> 1;
- }
-
- NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
- D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
- C[6] ^ C[7];
- NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
- D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
- D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
- NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
- D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
- C[0] ^ C[1] ^ C[4] ^ C[5];
- NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
- D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
- C[1] ^ C[2] ^ C[5] ^ C[6];
- NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
- D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
- C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
- NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
- D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
- C[3] ^ C[4] ^ C[7];
- NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
- D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
- C[5];
- NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
- D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
- C[6];
-
- crc_res = 0;
- for (i = 0; i < 8; i++)
- crc_res |= (NewCRC[i] << i);
-
- return crc_res;
-}
/* registers addresses are not in order
so these arrays help simplify the code */
-static const int cm_start[E1H_FUNC_MAX][9] = {
- {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
- XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START,
- XSEM_FUNC0_START},
- {MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START,
- XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START,
- XSEM_FUNC1_START},
- {MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START,
- XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START,
- XSEM_FUNC2_START},
- {MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START,
- XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START,
- XSEM_FUNC3_START},
- {MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START,
- XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START,
- XSEM_FUNC4_START},
- {MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START,
- XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START,
- XSEM_FUNC5_START},
- {MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START,
- XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START,
- XSEM_FUNC6_START},
- {MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START,
- XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START,
- XSEM_FUNC7_START}
-};
-
-static const int cm_end[E1H_FUNC_MAX][9] = {
- {MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END,
- XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END,
- XSEM_FUNC0_END},
- {MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END,
- XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END,
- XSEM_FUNC1_END},
- {MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END,
- XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END,
- XSEM_FUNC2_END},
- {MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END,
- XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END,
- XSEM_FUNC3_END},
- {MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END,
- XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END,
- XSEM_FUNC4_END},
- {MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END,
- XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END,
- XSEM_FUNC5_END},
- {MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END,
- XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END,
- XSEM_FUNC6_END},
- {MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END,
- XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END,
- XSEM_FUNC7_END},
-};
-
-static const int hc_limits[E1H_FUNC_MAX][2] = {
- {HC_FUNC0_START, HC_FUNC0_END},
- {HC_FUNC1_START, HC_FUNC1_END},
- {HC_FUNC2_START, HC_FUNC2_END},
- {HC_FUNC3_START, HC_FUNC3_END},
- {HC_FUNC4_START, HC_FUNC4_END},
- {HC_FUNC5_START, HC_FUNC5_END},
- {HC_FUNC6_START, HC_FUNC6_END},
- {HC_FUNC7_START, HC_FUNC7_END}
+static const int cm_blocks[9] = {
+ MISC_BLOCK, TCM_BLOCK, UCM_BLOCK, CCM_BLOCK, XCM_BLOCK,
+ TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
};
#endif /* BNX2X_INIT_H */
diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h
new file mode 100644
index 00000000000..32552b9366c
--- /dev/null
+++ b/drivers/net/bnx2x_init_ops.h
@@ -0,0 +1,442 @@
+/* bnx2x_init_ops.h: Broadcom Everest network driver.
+ * Static functions needed during the initialization.
+ * This file is "included" in bnx2x_main.c.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ */
+#ifndef BNX2X_INIT_OPS_H
+#define BNX2X_INIT_OPS_H
+
+static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
+
+static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+ u32 len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ REG_WR(bp, addr + i*4, data[i]);
+ if (!(i % 10000)) {
+ touch_softlockup_watchdog();
+ cpu_relax();
+ }
+ }
+}
+
+static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+ u16 len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ REG_WR_IND(bp, addr + i*4, data[i]);
+ if (!(i % 10000)) {
+ touch_softlockup_watchdog();
+ cpu_relax();
+ }
+ }
+}
+
+static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
+{
+ int offset = 0;
+
+ if (bp->dmae_ready) {
+ while (len > DMAE_LEN32_WR_MAX) {
+ bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+ addr + offset, DMAE_LEN32_WR_MAX);
+ offset += DMAE_LEN32_WR_MAX * 4;
+ len -= DMAE_LEN32_WR_MAX;
+ }
+ bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+ addr + offset, len);
+ } else
+ bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+{
+ u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
+ u32 buf_len32 = buf_len / 4;
+ int i;
+
+ memset(bp->gunzip_buf, fill, buf_len);
+
+ for (i = 0; i < len; i += buf_len32) {
+ u32 cur_len = min(buf_len32, len - i);
+
+ bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+ }
+}
+
+static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
+ u32 len64)
+{
+ u32 buf_len32 = FW_BUF_SIZE / 4;
+ u32 len = len64 * 2;
+ u64 data64 = 0;
+ int i;
+
+ /* 64 bit value is in a blob: first low DWORD, then high DWORD */
+ data64 = HILO_U64((*(data + 1)), (*data));
+ len64 = min((u32)(FW_BUF_SIZE/8), len64);
+ for (i = 0; i < len64; i++) {
+ u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
+
+ *pdata = data64;
+ }
+
+ for (i = 0; i < len; i += buf_len32) {
+ u32 cur_len = min(buf_len32, len - i);
+
+ bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+ }
+}
+
+/*********************************************************
+ There are different blobs for each PRAM section.
+ In addition, each blob write operation is divided into a few operations
+ in order to decrease the amount of phys. contiguous buffer needed.
+ Thus, when we select a blob the address may be with some offset
+ from the beginning of PRAM section.
+ The same holds for the INT_TABLE sections.
+**********************************************************/
+#define IF_IS_INT_TABLE_ADDR(base, addr) \
+ if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
+
+#define IF_IS_PRAM_ADDR(base, addr) \
+ if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
+
+static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data)
+{
+ IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
+ data = bp->tsem_int_table_data;
+ else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
+ data = bp->csem_int_table_data;
+ else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
+ data = bp->usem_int_table_data;
+ else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
+ data = bp->xsem_int_table_data;
+ else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
+ data = bp->tsem_pram_data;
+ else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
+ data = bp->csem_pram_data;
+ else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
+ data = bp->usem_pram_data;
+ else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
+ data = bp->xsem_pram_data;
+
+ return data;
+}
+
+static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
+{
+ int offset = 0;
+
+ if (bp->dmae_ready) {
+ while (len > DMAE_LEN32_WR_MAX) {
+ bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+ addr + offset, DMAE_LEN32_WR_MAX);
+ offset += DMAE_LEN32_WR_MAX * 4;
+ len -= DMAE_LEN32_WR_MAX;
+ }
+ bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+ addr + offset, len);
+ } else
+ bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
+ u32 len)
+{
+ /* This is needed for NO_ZIP mode, currently supported
+ in little endian mode only */
+ data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data);
+
+ if ((len * 4) > FW_BUF_SIZE) {
+ BNX2X_ERR("LARGE DMAE OPERATION ! "
+ "addr 0x%x len 0x%x\n", addr, len*4);
+ return;
+ }
+ memcpy(bp->gunzip_buf, data, len * 4);
+
+ bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr,
+ u32 len, u32 blob_off)
+{
+ int rc, i;
+ const u8 *data = NULL;
+
+ data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off;
+
+ if (data == NULL) {
+ panic("Blob not found for addr 0x%x\n", addr);
+ return;
+ }
+
+ rc = bnx2x_gunzip(bp, data, len);
+ if (rc) {
+ BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc);
+ BNX2X_ERR("blob_offset=0x%x\n", blob_off);
+ return;
+ }
+
+ /* gunzip_outlen is in dwords */
+ len = bp->gunzip_outlen;
+ for (i = 0; i < len; i++)
+ ((u32 *)bp->gunzip_buf)[i] =
+ cpu_to_le32(((u32 *)bp->gunzip_buf)[i]);
+
+ bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage)
+{
+ int hw_wr, i;
+ u16 op_start =
+ bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)];
+ u16 op_end =
+ bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)];
+ union init_op *op;
+ u32 op_type, addr, len;
+ const u32 *data, *data_base;
+
+ /* If empty block */
+ if (op_start == op_end)
+ return;
+
+ if (CHIP_REV_IS_FPGA(bp))
+ hw_wr = OP_WR_FPGA;
+ else if (CHIP_REV_IS_EMUL(bp))
+ hw_wr = OP_WR_EMUL;
+ else
+ hw_wr = OP_WR_ASIC;
+
+ data_base = bp->init_data;
+
+ for (i = op_start; i < op_end; i++) {
+
+ op = (union init_op *)&(bp->init_ops[i]);
+
+ op_type = op->str_wr.op;
+ addr = op->str_wr.offset;
+ len = op->str_wr.data_len;
+ data = data_base + op->str_wr.data_off;
+
+ /* HW/EMUL specific */
+ if (unlikely((op_type > OP_WB) && (op_type == hw_wr)))
+ op_type = OP_WR;
+
+ switch (op_type) {
+ case OP_RD:
+ REG_RD(bp, addr);
+ break;
+ case OP_WR:
+ REG_WR(bp, addr, op->write.val);
+ break;
+ case OP_SW:
+ bnx2x_init_str_wr(bp, addr, data, len);
+ break;
+ case OP_WB:
+ bnx2x_init_wr_wb(bp, addr, data, len);
+ break;
+ case OP_SI:
+ bnx2x_init_ind_wr(bp, addr, data, len);
+ break;
+ case OP_ZR:
+ bnx2x_init_fill(bp, addr, 0, op->zero.len);
+ break;
+ case OP_ZP:
+ bnx2x_init_wr_zp(bp, addr, len,
+ op->str_wr.data_off);
+ break;
+ case OP_WR_64:
+ bnx2x_init_wr_64(bp, addr, data, len);
+ break;
+ default:
+ /* happens whenever an op is of a diff HW */
+#if 0
+ DP(NETIF_MSG_HW, "skipping init operation "
+ "index %d[%d:%d]: type %d addr 0x%x "
+ "len %d(0x%x)\n",
+ i, op_start, op_end, op_type, addr, len, len);
+#endif
+ break;
+ }
+ }
+}
+
+/* PXP */
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+ u16 devctl;
+ int r_order, w_order;
+ u32 val, i;
+
+ pci_read_config_word(bp->pdev,
+ bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+ DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+ w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+ if (bp->mrrs == -1)
+ r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+ else {
+ DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+ r_order = bp->mrrs;
+ }
+
+ if (r_order > MAX_RD_ORD) {
+ DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n",
+ r_order, MAX_RD_ORD);
+ r_order = MAX_RD_ORD;
+ }
+ if (w_order > MAX_WR_ORD) {
+ DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n",
+ w_order, MAX_WR_ORD);
+ w_order = MAX_WR_ORD;
+ }
+ if (CHIP_REV_IS_FPGA(bp)) {
+ DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
+ w_order = 0;
+ }
+ DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order);
+
+ for (i = 0; i < NUM_RD_Q-1; i++) {
+ REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
+ REG_WR(bp, read_arb_addr[i].add,
+ read_arb_data[i][r_order].add);
+ REG_WR(bp, read_arb_addr[i].ubound,
+ read_arb_data[i][r_order].ubound);
+ }
+
+ for (i = 0; i < NUM_WR_Q-1; i++) {
+ if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
+ (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
+
+ REG_WR(bp, write_arb_addr[i].l,
+ write_arb_data[i][w_order].l);
+
+ REG_WR(bp, write_arb_addr[i].add,
+ write_arb_data[i][w_order].add);
+
+ REG_WR(bp, write_arb_addr[i].ubound,
+ write_arb_data[i][w_order].ubound);
+ } else {
+
+ val = REG_RD(bp, write_arb_addr[i].l);
+ REG_WR(bp, write_arb_addr[i].l,
+ val | (write_arb_data[i][w_order].l << 10));
+
+ val = REG_RD(bp, write_arb_addr[i].add);
+ REG_WR(bp, write_arb_addr[i].add,
+ val | (write_arb_data[i][w_order].add << 10));
+
+ val = REG_RD(bp, write_arb_addr[i].ubound);
+ REG_WR(bp, write_arb_addr[i].ubound,
+ val | (write_arb_data[i][w_order].ubound << 7));
+ }
+ }
+
+ val = write_arb_data[NUM_WR_Q-1][w_order].add;
+ val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
+ val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
+ REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
+
+ val = read_arb_data[NUM_RD_Q-1][r_order].add;
+ val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
+ val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
+ REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
+
+ REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
+ REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
+ REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
+ REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
+
+ if (r_order == MAX_RD_ORD)
+ REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+ REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
+
+ if (CHIP_IS_E1H(bp)) {
+ val = ((w_order == 0) ? 2 : 3);
+ REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
+ REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
+ REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
+ }
+}
+
+/*****************************************************************************
+ * Description:
+ * Calculates crc 8 on a word value: polynomial 0-1-2-8
+ * Code was translated from Verilog.
+ ****************************************************************************/
+static u8 calc_crc8(u32 data, u8 crc)
+{
+ u8 D[32];
+ u8 NewCRC[8];
+ u8 C[8];
+ u8 crc_res;
+ u8 i;
+
+ /* split the data into 31 bits */
+ for (i = 0; i < 32; i++) {
+ D[i] = data & 1;
+ data = data >> 1;
+ }
+
+ /* split the crc into 8 bits */
+ for (i = 0; i < 8; i++) {
+ C[i] = crc & 1;
+ crc = crc >> 1;
+ }
+
+ NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+ D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+ C[6] ^ C[7];
+ NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+ D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+ D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
+ NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+ D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+ C[0] ^ C[1] ^ C[4] ^ C[5];
+ NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+ D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+ C[1] ^ C[2] ^ C[5] ^ C[6];
+ NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+ D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+ C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+ NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+ D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+ C[3] ^ C[4] ^ C[7];
+ NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+ D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+ C[5];
+ NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+ D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+ C[6];
+
+ crc_res = 0;
+ for (i = 0; i < 8; i++)
+ crc_res |= (NewCRC[i] << i);
+
+ return crc_res;
+}
+
+#endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ad5ef25add3..cdc80e0820c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -53,12 +53,19 @@
#include "bnx2x.h"
#include "bnx2x_init.h"
+#include "bnx2x_init_ops.h"
#include "bnx2x_dump.h"
#define DRV_MODULE_VERSION "1.48.105"
#define DRV_MODULE_RELDATE "2009/03/02"
#define BNX2X_BC_VER 0x040200
+#include <linux/firmware.h>
+#include "bnx2x_fw_file_hdr.h"
+/* FW files */
+#define FW_FILE_PREFIX_E1 "bnx2x-e1-"
+#define FW_FILE_PREFIX_E1H "bnx2x-e1h-"
+
/* Time in jiffies before concluding the transmitter is hung */
#define TX_TIMEOUT (5*HZ)
@@ -5232,13 +5239,15 @@ static void bnx2x_gunzip_end(struct bnx2x *bp)
}
}
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
{
int n, rc;
/* check gzip header */
- if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED))
+ if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
+ BNX2X_ERR("Bad gzip header\n");
return -EINVAL;
+ }
n = 10;
@@ -5247,7 +5256,7 @@ static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
if (zbuf[3] & FNAME)
while ((zbuf[n++] != 0) && (n < len));
- bp->strm->next_in = zbuf + n;
+ bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
bp->strm->avail_in = len - n;
bp->strm->next_out = bp->gunzip_buf;
bp->strm->avail_out = FW_BUF_SIZE;
@@ -5369,8 +5378,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
msleep(50);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
msleep(50);
- bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
- bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
DP(NETIF_MSG_HW, "part2\n");
@@ -5434,8 +5443,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
msleep(50);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
msleep(50);
- bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
- bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
#ifndef BCM_ISCSI
/* set NIC mode */
REG_WR(bp, PRS_REG_NIC_MODE, 1);
@@ -5510,7 +5519,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
- bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
+ bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1H(bp))
REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp));
@@ -5518,14 +5527,14 @@ static int bnx2x_init_common(struct bnx2x *bp)
msleep(30);
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
- bnx2x_init_block(bp, PXP_COMMON_START, PXP_COMMON_END);
+ bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1(bp)) {
/* enable HW interrupt from PXP on USDM overflow
bit 16 on INT_MASK_0 */
REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
}
- bnx2x_init_block(bp, PXP2_COMMON_START, PXP2_COMMON_END);
+ bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE);
bnx2x_init_pxp(bp);
#ifdef __BIG_ENDIAN
@@ -5571,60 +5580,60 @@ static int bnx2x_init_common(struct bnx2x *bp)
REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
- bnx2x_init_block(bp, DMAE_COMMON_START, DMAE_COMMON_END);
+ bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE);
/* clean the DMAE memory */
bp->dmae_ready = 1;
bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8);
- bnx2x_init_block(bp, TCM_COMMON_START, TCM_COMMON_END);
- bnx2x_init_block(bp, UCM_COMMON_START, UCM_COMMON_END);
- bnx2x_init_block(bp, CCM_COMMON_START, CCM_COMMON_END);
- bnx2x_init_block(bp, XCM_COMMON_START, XCM_COMMON_END);
+ bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE);
bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
- bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
+ bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
/* soft reset pulse */
REG_WR(bp, QM_REG_SOFT_RESET, 1);
REG_WR(bp, QM_REG_SOFT_RESET, 0);
#ifdef BCM_ISCSI
- bnx2x_init_block(bp, TIMERS_COMMON_START, TIMERS_COMMON_END);
+ bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
#endif
- bnx2x_init_block(bp, DQ_COMMON_START, DQ_COMMON_END);
+ bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE);
REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
if (!CHIP_REV_IS_SLOW(bp)) {
/* enable hw interrupt from doorbell Q */
REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
}
- bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
- bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
/* set NIC mode */
REG_WR(bp, PRS_REG_NIC_MODE, 1);
if (CHIP_IS_E1H(bp))
REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
- bnx2x_init_block(bp, TSDM_COMMON_START, TSDM_COMMON_END);
- bnx2x_init_block(bp, CSDM_COMMON_START, CSDM_COMMON_END);
- bnx2x_init_block(bp, USDM_COMMON_START, USDM_COMMON_END);
- bnx2x_init_block(bp, XSDM_COMMON_START, XSDM_COMMON_END);
+ bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
- bnx2x_init_block(bp, TSEM_COMMON_START, TSEM_COMMON_END);
- bnx2x_init_block(bp, USEM_COMMON_START, USEM_COMMON_END);
- bnx2x_init_block(bp, CSEM_COMMON_START, CSEM_COMMON_END);
- bnx2x_init_block(bp, XSEM_COMMON_START, XSEM_COMMON_END);
+ bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE);
/* sync semi rtc */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
@@ -5632,16 +5641,16 @@ static int bnx2x_init_common(struct bnx2x *bp)
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
0x80000000);
- bnx2x_init_block(bp, UPB_COMMON_START, UPB_COMMON_END);
- bnx2x_init_block(bp, XPB_COMMON_START, XPB_COMMON_END);
- bnx2x_init_block(bp, PBF_COMMON_START, PBF_COMMON_END);
+ bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
REG_WR(bp, SRC_REG_SOFT_RST, 1);
for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
REG_WR(bp, i, 0xc0cac01a);
/* TODO: replace with something meaningful */
}
- bnx2x_init_block(bp, SRCH_COMMON_START, SRCH_COMMON_END);
+ bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
REG_WR(bp, SRC_REG_SOFT_RST, 0);
if (sizeof(union cdu_context) != 1024)
@@ -5649,7 +5658,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
printk(KERN_ALERT PFX "please adjust the size of"
" cdu_context(%ld)\n", (long)sizeof(union cdu_context));
- bnx2x_init_block(bp, CDU_COMMON_START, CDU_COMMON_END);
+ bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
val = (4 << 24) + (0 << 12) + 1024;
REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
if (CHIP_IS_E1(bp)) {
@@ -5658,7 +5667,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
REG_WR(bp, CDU_REG_CDU_DEBUG, 0);
}
- bnx2x_init_block(bp, CFC_COMMON_START, CFC_COMMON_END);
+ bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
/* enable context validation interrupt from CFC */
REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
@@ -5666,20 +5675,25 @@ static int bnx2x_init_common(struct bnx2x *bp)
/* set the thresholds to prevent CFC/CDU race */
REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
- bnx2x_init_block(bp, HC_COMMON_START, HC_COMMON_END);
- bnx2x_init_block(bp, MISC_AEU_COMMON_START, MISC_AEU_COMMON_END);
+ bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
/* PXPCS COMMON comes here */
+ bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2814, 0xffffffff);
REG_WR(bp, 0x3820, 0xffffffff);
/* EMAC0 COMMON comes here */
+ bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
/* EMAC1 COMMON comes here */
+ bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
/* DBU COMMON comes here */
+ bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
/* DBG COMMON comes here */
+ bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
- bnx2x_init_block(bp, NIG_COMMON_START, NIG_COMMON_END);
+ bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1H(bp)) {
REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp));
REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp));
@@ -5763,6 +5777,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
static int bnx2x_init_port(struct bnx2x *bp)
{
int port = BP_PORT(bp);
+ int init_stage = port ? PORT1_STAGE : PORT0_STAGE;
u32 low, high;
u32 val;
@@ -5771,7 +5786,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
/* Port PXP comes here */
+ bnx2x_init_block(bp, PXP_BLOCK, init_stage);
/* Port PXP2 comes here */
+ bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
#ifdef BCM_ISCSI
/* Port0 1
* Port1 385 */
@@ -5798,21 +5815,19 @@ static int bnx2x_init_port(struct bnx2x *bp)
REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
#endif
/* Port CMs come here */
- bnx2x_init_block(bp, (port ? XCM_PORT1_START : XCM_PORT0_START),
- (port ? XCM_PORT1_END : XCM_PORT0_END));
+ bnx2x_init_block(bp, XCM_BLOCK, init_stage);
/* Port QM comes here */
#ifdef BCM_ISCSI
REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
- bnx2x_init_block(bp, func ? TIMERS_PORT1_START : TIMERS_PORT0_START,
- func ? TIMERS_PORT1_END : TIMERS_PORT0_END);
+ bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
#endif
/* Port DQ comes here */
+ bnx2x_init_block(bp, DQ_BLOCK, init_stage);
- bnx2x_init_block(bp, (port ? BRB1_PORT1_START : BRB1_PORT0_START),
- (port ? BRB1_PORT1_END : BRB1_PORT0_END));
+ bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) {
/* no pause for emulation and FPGA */
low = 0;
@@ -5837,25 +5852,27 @@ static int bnx2x_init_port(struct bnx2x *bp)
/* Port PRS comes here */
+ bnx2x_init_block(bp, PRS_BLOCK, init_stage);
/* Port TSDM comes here */
+ bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
/* Port CSDM comes here */
+ bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
/* Port USDM comes here */
+ bnx2x_init_block(bp, USDM_BLOCK, init_stage);
/* Port XSDM comes here */
+ bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
- bnx2x_init_block(bp, port ? TSEM_PORT1_START : TSEM_PORT0_START,
- port ? TSEM_PORT1_END : TSEM_PORT0_END);
- bnx2x_init_block(bp, port ? USEM_PORT1_START : USEM_PORT0_START,
- port ? USEM_PORT1_END : USEM_PORT0_END);
- bnx2x_init_block(bp, port ? CSEM_PORT1_START : CSEM_PORT0_START,
- port ? CSEM_PORT1_END : CSEM_PORT0_END);
- bnx2x_init_block(bp, port ? XSEM_PORT1_START : XSEM_PORT0_START,
- port ? XSEM_PORT1_END : XSEM_PORT0_END);
+ bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
+ bnx2x_init_block(bp, USEM_BLOCK, init_stage);
+ bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
+ bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
/* Port UPB comes here */
+ bnx2x_init_block(bp, UPB_BLOCK, init_stage);
/* Port XPB comes here */
+ bnx2x_init_block(bp, XPB_BLOCK, init_stage);
- bnx2x_init_block(bp, port ? PBF_PORT1_START : PBF_PORT0_START,
- port ? PBF_PORT1_END : PBF_PORT0_END);
+ bnx2x_init_block(bp, PBF_BLOCK, init_stage);
/* configure PBF to work without PAUSE mtu 9000 */
REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
@@ -5885,18 +5902,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
/* Port SRCH comes here */
#endif
/* Port CDU comes here */
+ bnx2x_init_block(bp, CDU_BLOCK, init_stage);
/* Port CFC comes here */
+ bnx2x_init_block(bp, CFC_BLOCK, init_stage);
if (CHIP_IS_E1(bp)) {
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
}
- bnx2x_init_block(bp, port ? HC_PORT1_START : HC_PORT0_START,
- port ? HC_PORT1_END : HC_PORT0_END);
+ bnx2x_init_block(bp, HC_BLOCK, init_stage);
- bnx2x_init_block(bp, port ? MISC_AEU_PORT1_START :
- MISC_AEU_PORT0_START,
- port ? MISC_AEU_PORT1_END : MISC_AEU_PORT0_END);
+ bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage);
/* init aeu_mask_attn_func_0/1:
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
@@ -5905,13 +5921,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
(IS_E1HMF(bp) ? 0xF7 : 0x7));
/* Port PXPCS comes here */
+ bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
/* Port EMAC0 comes here */
+ bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
/* Port EMAC1 comes here */
+ bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
/* Port DBU comes here */
+ bnx2x_init_block(bp, DBU_BLOCK, init_stage);
/* Port DBG comes here */
+ bnx2x_init_block(bp, DBG_BLOCK, init_stage);
- bnx2x_init_block(bp, port ? NIG_PORT1_START : NIG_PORT0_START,
- port ? NIG_PORT1_END : NIG_PORT0_END);
+ bnx2x_init_block(bp, NIG_BLOCK, init_stage);
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
@@ -5931,7 +5951,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
}
/* Port MCP comes here */
+ bnx2x_init_block(bp, MCP_BLOCK, init_stage);
/* Port DMAE comes here */
+ bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
@@ -6036,7 +6058,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
if (CHIP_IS_E1H(bp)) {
for (i = 0; i < 9; i++)
bnx2x_init_block(bp,
- cm_start[func][i], cm_end[func][i]);
+ cm_blocks[i], FUNC0_STAGE + func);
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
@@ -6049,7 +6071,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
}
- bnx2x_init_block(bp, hc_limits[func][0], hc_limits[func][1]);
+ bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2114, 0xffffffff);
@@ -11082,6 +11104,190 @@ static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
return val;
}
+static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
+{
+ struct bnx2x_fw_file_hdr *fw_hdr;
+ struct bnx2x_fw_file_section *sections;
+ u16 *ops_offsets;
+ u32 offset, len, num_ops;
+ int i;
+ const struct firmware *firmware = bp->firmware;
+ const u8 * fw_ver;
+
+ if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
+ return -EINVAL;
+
+ fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
+ sections = (struct bnx2x_fw_file_section *)fw_hdr;
+
+ /* Make sure none of the offsets and sizes make us read beyond
+ * the end of the firmware data */
+ for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
+ offset = be32_to_cpu(sections[i].offset);
+ len = be32_to_cpu(sections[i].len);
+ if (offset + len > firmware->size) {
+ printk(KERN_ERR PFX "Section %d length is out of bounds\n", i);
+ return -EINVAL;
+ }
+ }
+
+ /* Likewise for the init_ops offsets */
+ offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
+ ops_offsets = (u16 *)(firmware->data + offset);
+ num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
+
+ for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
+ if (be16_to_cpu(ops_offsets[i]) > num_ops) {
+ printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i);
+ return -EINVAL;
+ }
+ }
+
+ /* Check FW version */
+ offset = be32_to_cpu(fw_hdr->fw_version.offset);
+ fw_ver = firmware->data + offset;
+ if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
+ (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
+ (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
+ (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+ printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
+ " Should be %d.%d.%d.%d\n",
+ fw_ver[0], fw_ver[1], fw_ver[2],
+ fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
+ BCM_5710_FW_MINOR_VERSION,
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_ENGINEERING_VERSION);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+ u32 i;
+ const __be32 *source = (const __be32*)_source;
+ u32 *target = (u32*)_target;
+
+ for (i = 0; i < n/4; i++)
+ target[i] = be32_to_cpu(source[i]);
+}
+
+/*
+ Ops array is stored in the following format:
+ {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
+ */
+static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+{
+ u32 i, j, tmp;
+ const __be32 *source = (const __be32*)_source;
+ struct raw_op *target = (struct raw_op*)_target;
+
+ for (i = 0, j = 0; i < n/8; i++, j+=2) {
+ tmp = be32_to_cpu(source[j]);
+ target[i].op = (tmp >> 24) & 0xff;
+ target[i].offset = tmp & 0xffffff;
+ target[i].raw_data = be32_to_cpu(source[j+1]);
+ }
+}
+static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+ u32 i;
+ u16 *target = (u16*)_target;
+ const __be16 *source = (const __be16*)_source;
+
+ for (i = 0; i < n/2; i++)
+ target[i] = be16_to_cpu(source[i]);
+}
+
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+ do { \
+ u32 len = be32_to_cpu(fw_hdr->arr.len); \
+ bp->arr = kmalloc(len, GFP_KERNEL); \
+ if (!bp->arr) { \
+ printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \
+ goto lbl; \
+ } \
+ func(bp->firmware->data + \
+ be32_to_cpu(fw_hdr->arr.offset), \
+ (u8*)bp->arr, len); \
+ } while (0)
+
+
+static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
+{
+ char fw_file_name[40] = {0};
+ int rc, offset;
+ struct bnx2x_fw_file_hdr *fw_hdr;
+
+ /* Create a FW file name */
+ if (CHIP_IS_E1(bp))
+ offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+ else
+ offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
+
+ sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
+ BCM_5710_FW_MAJOR_VERSION,
+ BCM_5710_FW_MINOR_VERSION,
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_ENGINEERING_VERSION);
+
+ printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+
+ rc = request_firmware(&bp->firmware, fw_file_name, dev);
+ if (rc) {
+ printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name);
+ goto request_firmware_exit;
+ }
+
+ rc = bnx2x_check_firmware(bp);
+ if (rc) {
+ printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+ goto request_firmware_exit;
+ }
+
+ fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
+
+ /* Initialize the pointers to the init arrays */
+ /* Blob */
+ BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
+
+ /* Opcodes */
+ BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
+
+ /* Offsets */
+ BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
+
+ /* STORMs firmware */
+ bp->tsem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+ bp->tsem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+ bp->usem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+ bp->usem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->usem_pram_data.offset);
+ bp->xsem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+ bp->xsem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+ bp->csem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+ bp->csem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->csem_pram_data.offset);
+
+ return 0;
+init_offsets_alloc_err:
+ kfree(bp->init_ops);
+init_ops_alloc_err:
+ kfree(bp->init_data);
+request_firmware_exit:
+ release_firmware(bp->firmware);
+
+ return rc;
+}
+
+
static int __devinit bnx2x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
@@ -11116,6 +11322,13 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
if (rc)
goto init_one_exit;
+ /* Set init arrays */
+ rc = bnx2x_init_firmware(bp, &pdev->dev);
+ if (rc) {
+ printk(KERN_ERR PFX "Error loading firmware\n");
+ goto init_one_exit;
+ }
+
rc = register_netdev(dev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11163,6 +11376,11 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
unregister_netdev(dev);
+ kfree(bp->init_ops_offsets);
+ kfree(bp->init_ops);
+ kfree(bp->init_data);
+ release_firmware(bp->firmware);
+
if (bp->regview)
iounmap(bp->regview);
@@ -11431,3 +11649,4 @@ static void __exit bnx2x_cleanup(void)
module_init(bnx2x_init);
module_exit(bnx2x_cleanup);
+
diff --git a/firmware/Makefile b/firmware/Makefile
index 25200d106ee..1c670e0c044 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
bnx2/bnx2-rv2p-09-4.6.15.fw \
bnx2/bnx2-mips-06-4.6.16.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 4c52984a831..c1e9c5ab694 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -618,6 +618,26 @@ Found in hex form in kernel source.
--------------------------------------------------------------------------
+Driver: bnx2x: Broadcom Everest
+
+File: bnx2x-e1-4.8.53.0.fw.ihex
+File: bnx2x-e1h-4.8.53.0.fw.ihex
+
+License:
+ Copyright (c) 2007-2009 Broadcom Corporation
+
+ This file contains firmware data derived from proprietary unpublished
+ source code, Copyright (c) 2007-2009 Broadcom Corporation.
+
+ Permission is hereby granted for the distribution of this firmware data
+ in hexadecimal or equivalent format, provided this copyright notice is
+ accompanying it.
+
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
Driver: BNX2 - Broadcom NetXtremeII
File: bnx2/bnx2-mips-06-4.6.16.fw
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-23 16:58:36 +0000