diff options
29 files changed, 627 insertions, 720 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 39ca7b9da36..0e4617104f8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -50,7 +50,7 @@ config PPC config EARLY_PRINTK bool - default y if PPC64 + default y config COMPAT bool diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index bf3fd6f0224..89714929f44 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -18,7 +18,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o idle_64.o + firmware.o sysfs.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -46,7 +46,7 @@ extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ - prom.o traps.o setup-common.o + prom.o traps.o setup-common.o udbg.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_OF) += prom_init.o @@ -56,8 +56,7 @@ obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_MULTIPLATFORM) += legacy_serial.o -obj64-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o -obj64-$(CONFIG_PPC_PMAC) += udbg_scc.o +obj-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index bdfba92b2b3..893dd24a9f6 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -31,15 +31,18 @@ static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb); static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb); static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb); -static int g_loc_X; -static int g_loc_Y; -static int g_max_loc_X; -static int g_max_loc_Y; +#define __force_data __attribute__((__section__(".data"))) -static int dispDeviceRowBytes; -static int dispDeviceDepth; -static int dispDeviceRect[4]; -static unsigned char *dispDeviceBase, *logicalDisplayBase; +static int g_loc_X __force_data; +static int g_loc_Y __force_data; +static int g_max_loc_X __force_data; +static int g_max_loc_Y __force_data; + +static int dispDeviceRowBytes __force_data; +static int dispDeviceDepth __force_data; +static int dispDeviceRect[4] __force_data; +static unsigned char *dispDeviceBase __force_data; +static unsigned char *logicalDisplayBase __force_data; unsigned long disp_BAT[2] __initdata = {0, 0}; @@ -47,7 +50,7 @@ unsigned long disp_BAT[2] __initdata = {0, 0}; static unsigned char vga_font[cmapsz]; -int boot_text_mapped; +int boot_text_mapped __force_data = 0; int force_printk_to_btext = 0; #ifdef CONFIG_PPC32 @@ -66,8 +69,7 @@ int force_printk_to_btext = 0; * is really badly aligned, but I didn't encounter this case * yet. */ -void __init -btext_prepare_BAT(void) +void __init btext_prepare_BAT(void) { unsigned long vaddr = KERNELBASE + 0x10000000; unsigned long addr; @@ -95,12 +97,13 @@ btext_prepare_BAT(void) } #endif -/* This function will enable the early boot text when doing OF booting. This - * way, xmon output should work too + +/* This function can be used to enable the early boot text when doing + * OF booting or within bootx init. It must be followed by a btext_unmap() + * call before the logical address becomes unuseable */ -void __init -btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address) +void __init btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address) { g_loc_X = 0; g_loc_Y = 0; @@ -116,6 +119,11 @@ btext_setup_display(int width, int height, int depth, int pitch, boot_text_mapped = 1; } +void __init btext_unmap(void) +{ + boot_text_mapped = 0; +} + /* Here's a small text engine to use during early boot * or for debugging purposes * @@ -127,7 +135,7 @@ btext_setup_display(int width, int height, int depth, int pitch, * changes. */ -void map_boot_text(void) +static void map_boot_text(void) { unsigned long base, offset, size; unsigned char *vbase; @@ -175,8 +183,9 @@ int btext_initialize(struct device_node *np) if (prop) address = *prop; - /* FIXME: Add support for PCI reg properties */ - + /* FIXME: Add support for PCI reg properties. Right now, only + * reliable on macs + */ if (address == 0) return -EINVAL; @@ -184,7 +193,6 @@ int btext_initialize(struct device_node *np) g_loc_Y = 0; g_max_loc_X = width / 8; g_max_loc_Y = height / 16; - logicalDisplayBase = (unsigned char *)address; dispDeviceBase = (unsigned char *)address; dispDeviceRowBytes = pitch; dispDeviceDepth = depth; @@ -197,7 +205,7 @@ int btext_initialize(struct device_node *np) return 0; } -void __init init_boot_display(void) +int __init btext_find_display(int allow_nonstdout) { char *name; struct device_node *np = NULL; @@ -218,8 +226,8 @@ void __init init_boot_display(void) } if (np) rc = btext_initialize(np); - if (rc == 0) - return; + if (rc == 0 || !allow_nonstdout) + return rc; for (np = NULL; (np = of_find_node_by_type(np, "display"));) { if (get_property(np, "linux,opened", NULL)) { @@ -228,8 +236,9 @@ void __init init_boot_display(void) printk("result: %d\n", rc); } if (rc == 0) - return; + break; } + return rc; } /* Calc the base address of a given point (x,y) */ @@ -277,44 +286,83 @@ EXPORT_SYMBOL(btext_update_display); void btext_clearscreen(void) { - unsigned long *base = (unsigned long *)calc_base(0, 0); + unsigned int *base = (unsigned int *)calc_base(0, 0); unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; + (dispDeviceDepth >> 3)) >> 2; int i,j; for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++) { - unsigned long *ptr = base; + unsigned int *ptr = base; for(j=width; j; --j) *(ptr++) = 0; - base += (dispDeviceRowBytes >> 3); + base += (dispDeviceRowBytes >> 2); + } +} + +void btext_flushscreen(void) +{ + unsigned int *base = (unsigned int *)calc_base(0, 0); + unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * + (dispDeviceDepth >> 3)) >> 2; + int i,j; + + for (i=0; i < (dispDeviceRect[3] - dispDeviceRect[1]); i++) + { + unsigned int *ptr = base; + for(j = width; j > 0; j -= 8) { + __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr)); + ptr += 8; + } + base += (dispDeviceRowBytes >> 2); } + __asm__ __volatile__ ("sync" ::: "memory"); } +void btext_flushline(void) +{ + unsigned int *base = (unsigned int *)calc_base(0, g_loc_Y << 4); + unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * + (dispDeviceDepth >> 3)) >> 2; + int i,j; + + for (i=0; i < 16; i++) + { + unsigned int *ptr = base; + for(j = width; j > 0; j -= 8) { + __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr)); + ptr += 8; + } + base += (dispDeviceRowBytes >> 2); + } + __asm__ __volatile__ ("sync" ::: "memory"); +} + + #ifndef NO_SCROLL static void scrollscreen(void) { - unsigned long *src = (unsigned long *)calc_base(0,16); - unsigned long *dst = (unsigned long *)calc_base(0,0); + unsigned int *src = (unsigned int *)calc_base(0,16); + unsigned int *dst = (unsigned int *)calc_base(0,0); unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; + (dispDeviceDepth >> 3)) >> 2; int i,j; for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++) { - unsigned long *src_ptr = src; - unsigned long *dst_ptr = dst; + unsigned int *src_ptr = src; + unsigned int *dst_ptr = dst; for(j=width; j; --j) *(dst_ptr++) = *(src_ptr++); - src += (dispDeviceRowBytes >> 3); - dst += (dispDeviceRowBytes >> 3); + src += (dispDeviceRowBytes >> 2); + dst += (dispDeviceRowBytes >> 2); } for (i=0; i<16; i++) { - unsigned long *dst_ptr = dst; + unsigned int *dst_ptr = dst; for(j=width; j; --j) *(dst_ptr++) = 0; - dst += (dispDeviceRowBytes >> 3); + dst += (dispDeviceRowBytes >> 2); } } #endif /* ndef NO_SCROLL */ @@ -377,6 +425,14 @@ void btext_drawstring(const char *c) btext_drawchar(*c++); } +void btext_drawtext(const char *c, unsigned int len) +{ + if (!boot_text_mapped) + return; + while (len--) + btext_drawchar(*c++); +} + void btext_drawhex(unsigned long v) { char *hex_table = "0123456789abcdef"; diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index ccdf94731e3..fdd34dbd879 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -153,6 +153,9 @@ __after_mmu_off: bl flush_tlbs bl initial_bats +#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) + bl setup_disp_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -1306,6 +1309,32 @@ initial_bats: blr +#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +setup_disp_bat: + /* + * setup the display bat prepared for us in prom.c + */ + mflr r8 + bl reloc_offset + mtlr r8 + addis r8,r3,disp_BAT@ha + addi r8,r8,disp_BAT@l + cmpwi cr0,r8,0 + beqlr + lwz r11,0(r8) + lwz r8,4(r8) + mfspr r9,SPRN_PVR + rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ + cmpwi 0,r9,1 + beq 1f + mtspr SPRN_DBAT3L,r8 + mtspr SPRN_DBAT3U,r11 + blr +1: mtspr SPRN_IBAT3L,r8 + mtspr SPRN_IBAT3U,r11 + blr +#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 02baacf0436..79d434fc14d 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -40,6 +40,7 @@ #include <asm/xmon.h> #include <asm/time.h> #include <asm/serial.h> +#include <asm/udbg.h> #include "setup.h" @@ -173,12 +174,23 @@ void __init platform_init(void) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ +#ifdef CONFIG_BOOTX_TEXT + udbg_putc = btext_drawchar; +#endif + + /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); + /* Check default command line */ #ifdef CONFIG_CMDLINE - strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); + if (cmd_line[0] == 0) + strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); #endif /* CONFIG_CMDLINE */ + /* Base init based on machine type */ platform_init(); #ifdef CONFIG_6xx @@ -294,21 +306,11 @@ void __init setup_arch(char **cmdline_p) smp_setup_cpu_maps(); -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); -#endif - -#ifdef CONFIG_PPC_PMAC - /* This could be called "early setup arch", it must be done - * now because xmon need it - */ - if (_machine == _MACH_Pmac) - pmac_feature_init(); /* New cool way */ -#endif - #ifdef CONFIG_XMON_DEFAULT xmon_init(1); #endif + /* Register early console */ + register_early_udbg_console(); #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 0fc442ad1d2..65603e9af98 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -474,10 +474,6 @@ void __init setup_system(void) */ finish_device_tree(); -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); -#endif - /* * Initialize xmon */ diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 2e372477d22..cc2df5e61bb 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -16,8 +16,8 @@ #include <linux/console.h> #include <asm/processor.h> -void (*udbg_putc)(unsigned char c); -unsigned char (*udbg_getc)(void); +void (*udbg_putc)(char c); +char (*udbg_getc)(void); int (*udbg_getc_poll)(void); /* udbg library, used by xmon et al */ @@ -78,7 +78,7 @@ int udbg_read(char *buf, int buflen) #define UDBG_BUFSIZE 256 void udbg_printf(const char *fmt, ...) { - unsigned char buf[UDBG_BUFSIZE]; + char buf[UDBG_BUFSIZE]; va_list args; va_start(args, fmt); @@ -116,6 +116,8 @@ void __init disable_early_printk(void) /* called by setup_system */ void register_early_udbg_console(void) { + if (early_console_initialized) + return; early_console_initialized = 1; register_console(&udbg_console); } diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 50fd376446c..28a58da5592 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -47,7 +47,7 @@ struct NS16550 { static volatile struct NS16550 __iomem *udbg_comport; -static void udbg_550_putc(unsigned char c) +static void udbg_550_putc(char c) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) @@ -69,7 +69,7 @@ static int udbg_550_getc_poll(void) return -1; } -static unsigned char udbg_550_getc(void) +static char udbg_550_getc(void) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 7d4b8b5f060..7d0d75c1184 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -188,6 +188,11 @@ void __init MMU_init(void) if (ppc_md.progress) ppc_md.progress("MMU:exit", 0x211); + + /* From now on, btext is no longer BAT mapped if it was at all */ +#ifdef CONFIG_BOOTX_TEXT + btext_unmap(); +#endif } /* This is only called until mem_init is done. */ diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index c9df44fcf57..3e5370eeb1b 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index f6e22da2a5d..52a9d0c1b8b 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2607,6 +2607,8 @@ found: */ static void __init probe_uninorth(void) { + u32 *addrp; + phys_addr_t address; unsigned long actrl; /* Locate core99 Uni-N */ @@ -2616,20 +2618,23 @@ static void __init probe_uninorth(void) uninorth_node = of_find_node_by_name(NULL, "u3"); uninorth_u3 = 1; } - if (uninorth_node && uninorth_node->n_addrs > 0) { - unsigned long address = uninorth_node->addrs[0].address; - uninorth_base = ioremap(address, 0x40000); - uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_u3) - u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); - } else - uninorth_node = NULL; - - if (!uninorth_node) + if (uninorth_node == NULL) return; - printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n", - uninorth_u3 ? "U3" : "UniNorth", uninorth_rev); + addrp = (u32 *)get_property(uninorth_node, "reg", NULL); + if (addrp == NULL) + return; + address = of_translate_address(uninorth_node, addrp); + if (address == 0) + return; + uninorth_base = ioremap(address, 0x40000); + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_u3) + u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + + printk(KERN_INFO "Found %s memory controller & host bridge," + " revision: %d\n", uninorth_u3 ? "U3" : "UniNorth", + uninorth_rev); printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); /* Set the arbitrer QAck delay according to what Apple does @@ -2653,18 +2658,17 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ { struct device_node* node; int i; - volatile u32 __iomem * base; - u32* revp; + volatile u32 __iomem *base; + u32 *addrp, *revp; + phys_addr_t addr; + u64 size; - node = find_devices(name); - if (!node || !node->n_addrs) - return; - if (compat) - do { - if (device_is_compatible(node, compat)) - break; - node = node->next; - } while (node); + for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) { + if (!compat) + break; + if (device_is_compatible(node, compat)) + break; + } if (!node) return; for(i=0; i<MAX_MACIO_CHIPS; i++) { @@ -2673,14 +2677,28 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ if (macio_chips[i].of_node == node) return; } + if (i >= MAX_MACIO_CHIPS) { printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); return; } - base = ioremap(node->addrs[0].address, node->addrs[0].size); + addrp = of_get_pci_address(node, 0, &size); + if (addrp == NULL) { + printk(KERN_ERR "pmac_feature: %s: can't find base !\n", + node->full_name); + return; + } + addr = of_translate_address(node, addrp); + if (addr == 0) { + printk(KERN_ERR "pmac_feature: %s, can't translate base !\n", + node->full_name); + return; + } + base = ioremap(addr, (unsigned long)size); if (!base) { - printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); + printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n", + node->full_name); return; } if (type == macio_keylargo) { diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index f3f39e8e337..606e0ed1373 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -36,7 +36,7 @@ #ifdef DEBUG #define DBG(x...) do {\ - printk(KERN_DEBUG "KW:" x); \ + printk(KERN_DEBUG "low_i2c:" x); \ } while(0) #else #define DBG(x...) @@ -342,7 +342,7 @@ static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, static void keywest_low_i2c_add(struct device_node *np) { struct low_i2c_host *host = find_low_i2c_host(NULL); - u32 *psteps, *prate, steps, aoffset = 0; + u32 *psteps, *prate, *addrp, steps; struct device_node *parent; if (host == NULL) { @@ -352,6 +352,16 @@ static void keywest_low_i2c_add(struct device_node *np) } memset(host, 0, sizeof(*host)); + /* Apple is kind enough to provide a valid AAPL,address property + * on all i2c keywest nodes so far ... we would have to fallback + * to macio parsing if that wasn't the case + */ + addrp = (u32 *)get_property(np, "AAPL,address", NULL); + if (addrp == NULL) { + printk(KERN_ERR "low_i2c: Can't find address for %s\n", + np->full_name); + return; + } init_MUTEX(&host->mutex); host->np = of_node_get(np); psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); @@ -360,12 +370,10 @@ static void keywest_low_i2c_add(struct device_node *np) steps >>= 1; parent = of_get_parent(np); host->num_channels = 1; - if (parent && parent->name[0] == 'u') { + if (parent && parent->name[0] == 'u') host->num_channels = 2; - aoffset = 3; - } /* Select interface rate */ - host->speed = KW_I2C_MODE_100KHZ; + host->speed = KW_I2C_MODE_25KHZ; prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); if (prate) switch(*prate) { case 100: @@ -379,9 +387,12 @@ static void keywest_low_i2c_add(struct device_node *np) break; } + printk(KERN_INFO "low_i2c: Bus %s found at 0x%08x, %d channels," + " speed = %d KHz\n", + np->full_name, *addrp, host->num_channels, prate ? *prate : 25); + host->mode = pmac_low_i2c_mode_std; - host->base = ioremap(np->addrs[0].address + aoffset, - np->addrs[0].size); + host->base = ioremap((*addrp), 0x1000); host->func = keywest_low_i2c_func; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 90040c49494..ff78eeac10f 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -459,7 +459,7 @@ void __init pmac_pic_init(void) mpic_setup_cascade(irqctrler2->intrs[0].line, pmac_u3_cascade, mpic2); } -#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) +#ifdef CONFIG_XMON { struct device_node* pswitch; int nmi_irq; diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 3b7a492d9b6..6ee620fe519 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -77,6 +77,7 @@ #include <asm/pmc.h> #include <asm/mpic.h> #include <asm/lmb.h> +#include <asm/udbg.h> #include "pmac.h" @@ -322,16 +323,6 @@ void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 - /* Probe motherboard chipset */ - /* this is done earlier in setup_arch for 32-bit */ - pmac_feature_init(); - - /* We can NAP */ - powersave_nap = 1; - printk(KERN_INFO "Using native/NAP idle loop\n"); -#endif - #ifdef CONFIG_KGDB zs_kgdb_hook(0); #endif @@ -622,13 +613,26 @@ static void __init pmac_init_early(void) * and call ioremap */ hpte_init_native(); +#endif - /* Init SCC */ - if (strstr(cmd_line, "sccdbg")) { - sccdbg = 1; - udbg_init_scc(NULL); + /* Enable early btext debug if requested */ + if (strstr(cmd_line, "btextdbg")) { + udbg_adb_init_early(); + register_early_udbg_console(); } + /* Probe motherboard chipset */ + pmac_feature_init(); + + /* We can NAP */ + powersave_nap = 1; + printk(KERN_INFO "Using native/NAP idle loop\n"); + + /* Initialize debug stuff */ + udbg_scc_init(!!strstr(cmd_line, "sccdbg")); + udbg_adb_init(!!strstr(cmd_line, "btextdbg")); + +#ifdef CONFIG_PPC64 /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; @@ -638,19 +642,8 @@ static void __init pmac_init_early(void) static void __init pmac_progress(char *s, unsigned short hex) { -#ifdef CONFIG_PPC64 - if (sccdbg) { - udbg_puts(s); - udbg_puts("\n"); - return; - } -#endif -#ifdef CONFIG_BOOTX_TEXT - if (boot_text_mapped) { - btext_drawstring(s); - btext_drawchar('\n'); - } -#endif /* CONFIG_BOOTX_TEXT */ + udbg_puts(s); + udbg_puts("\n"); } /* @@ -735,7 +728,8 @@ static int __init pmac_probe(int platform) } #ifdef CONFIG_PPC64 -static int pmac_probe_mode(struct pci_bus *bus) +/* Move that to pci.c */ +static int pmac_pci_probe_mode(struct pci_bus *bus) { struct device_node *node = bus->sysdata; @@ -771,7 +765,7 @@ struct machdep_calls __initdata pmac_md = { .check_legacy_ioport = pmac_check_legacy_ioport, .progress = pmac_progress, #ifdef CONFIG_PPC64 - .pci_probe_mode = pmac_probe_mode, + .pci_probe_mode = pmac_pci_probe_mode, .idle_loop = native_idle, .enable_pmcs = power4_enable_pmcs, #ifdef CONFIG_KEXEC diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c new file mode 100644 index 00000000000..e51de55b2d6 --- /dev/null +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -0,0 +1,218 @@ +#include <linux/config.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/bitops.h> +#include <linux/ptrace.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cuda.h> +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/xmon.h> +#include <asm/prom.h> +#include <asm/bootx.h> +#include <asm/machdep.h> +#include <asm/errno.h> +#include <asm/pmac_feature.h> +#include <asm/processor.h> +#include <asm/delay.h> +#include <asm/btext.h> +#include <asm/time.h> +#include <asm/udbg.h> + +/* + * This implementation is "special", it can "patch" the current + * udbg implementation and work on top of it. It must thus be + * initialized last + */ + +static void (*udbg_adb_old_putc)(char c); +static char (*udbg_adb_old_getc)(void); +static int (*udbg_adb_old_getc_poll)(void); + +static enum { + input_adb_none, + input_adb_pmu, + input_adb_cuda, +} input_type = input_adb_none; + +static int udbg_adb_use_btext; + +int xmon_wants_key, xmon_adb_keycode; + +static inline void udbg_adb_poll(void) +{ +#ifdef CONFIG_ADB_PMU + if (input_type == input_adb_pmu) + pmu_poll_adb(); +#endif /* CONFIG_ADB_PMU */ +#ifdef CONFIG_ADB_CUDA + if (input_type == input_adb_cuda) + cuda_poll(); +#endif /* CONFIG_ADB_CUDA */ +} + +#ifdef CONFIG_BOOTX_TEXT +static int xmon_adb_shiftstate; + +static unsigned char xmon_keytab[128] = + "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ + "yt123465=97-80]o" /* 0x10 - 0x1f */ + "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ + "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static unsigned char xmon_shift_keytab[128] = + "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ + "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ + "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ + "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static char udbg_adb_local_getc(void) +{ + int k, t, on; + + xmon_wants_key = 1; + for (;;) { + xmon_adb_keycode = -1; + t = 0; + on = 0; + k = -1; + do { + if (--t < 0) { + on = 1 - on; + btext_drawchar(on? 0xdb: 0x20); + btext_drawchar('\b'); + t = 200000; + } + udbg_adb_poll(); + if (udbg_adb_old_getc_poll) + k = udbg_adb_old_getc_poll(); + } while (k == -1 && xmon_adb_keycode == -1); + if (on) + btext_drawstring(" \b"); + if (k != -1) + return k; |