aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap2/clock24xx.c722
1 files changed, 0 insertions, 722 deletions
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index c3ccac1b721..615b511c68c 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -109,29 +109,6 @@ static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
return dpll_clk;
}
-static void omap2_followparent_recalc(struct clk *clk)
-{
- followparent_recalc(clk);
-}
-
-static void omap2_propagate_rate(struct clk * clk)
-{
- if (!(clk->flags & RATE_FIXED))
- clk->rate = clk->parent->rate;
-
- propagate_rate(clk);
-}
-
-#ifdef OLD_CK
-static void omap2_set_osc_ck(int enable)
-{
- if (enable)
- PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
- else
- PRCM_CLKSRC_CTRL |= 0x3 << 3;
-}
-#endif /* OLD_CK */
-
/* Enable an APLL if off */
static int omap2_clk_fixed_enable(struct clk *clk)
{
@@ -163,84 +140,6 @@ static int omap2_clk_fixed_enable(struct clk *clk)
return 0;
}
-#ifdef OLD_CK
-static void omap2_clk_wait_ready(struct clk *clk)
-{
- unsigned long reg, other_reg, st_reg;
- u32 bit;
- int i;
-
- reg = (unsigned long) clk->enable_reg;
- if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
- reg == (unsigned long) &CM_FCLKEN2_CORE)
- other_reg = (reg & ~0xf0) | 0x10;
- else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
- reg == (unsigned long) &CM_ICLKEN2_CORE)
- other_reg = (reg & ~0xf0) | 0x00;
- else
- return;
-
- /* No check for DSS or cam clocks */
- if ((reg & 0x0f) == 0) {
- if (clk->enable_bit <= 1 || clk->enable_bit == 31)
- return;
- }
-
- /* Check if both functional and interface clocks
- * are running. */
- bit = 1 << clk->enable_bit;
- if (!(__raw_readl(other_reg) & bit))
- return;
- st_reg = (other_reg & ~0xf0) | 0x20;
- i = 0;
- while (!(__raw_readl(st_reg) & bit)) {
- i++;
- if (i == 100000) {
- printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
- break;
- }
- }
- if (i)
- pr_debug("Clock %s stable after %d loops\n", clk->name, i);
-}
-
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-static int _omap2_clk_enable(struct clk * clk)
-{
- u32 regval32;
-
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- if (unlikely(clk == &osc_ck)) {
- omap2_set_osc_ck(1);
- return 0;
- }
-
- if (unlikely(clk->enable_reg == 0)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0;
- }
-
- if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
- omap2_clk_fixed_enable(clk);
- return 0;
- }
-
- regval32 = __raw_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- wmb();
-
- omap2_clk_wait_ready(clk);
-
- return 0;
-}
-#endif /* OLD_CK */
-
/* Stop APLL */
static void omap2_clk_fixed_disable(struct clk *clk)
{
@@ -251,65 +150,6 @@ static void omap2_clk_fixed_disable(struct clk *clk)
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
}
-#ifdef OLD_CK
-/* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
-{
- u32 regval32;
-
- if (unlikely(clk == &osc_ck)) {
- omap2_set_osc_ck(0);
- return;
- }
-
- if (clk->enable_reg == 0)
- return;
-
- if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
- omap2_clk_fixed_disable(clk);
- return;
- }
-
- regval32 = __raw_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- wmb();
-}
-
-static int omap2_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->usecount++ == 0) {
- if (likely((u32)clk->parent))
- ret = omap2_clk_enable(clk->parent);
-
- if (unlikely(ret != 0)) {
- clk->usecount--;
- return ret;
- }
-
- ret = _omap2_clk_enable(clk);
-
- if (unlikely(ret != 0) && clk->parent) {
- omap2_clk_disable(clk->parent);
- clk->usecount--;
- }
- }
-
- return ret;
-}
-
-static void omap2_clk_disable(struct clk *clk)
-{
- if (clk->usecount > 0 && !(--clk->usecount)) {
- _omap2_clk_disable(clk);
- if (likely((u32)clk->parent))
- omap2_clk_disable(clk->parent);
- }
-}
-#endif /* OLD_CK */
-
/*
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
@@ -343,195 +183,6 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
}
-#ifdef OLD_CK
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
- */
-static void omap2_clksel_recalc(struct clk * clk)
-{
- u32 fixed = 0, div = 0;
-
- if (clk == &dpll_ck) {
- clk->rate = omap2_get_dpll_rate(clk);
- fixed = 1;
- div = 0;
- }
-
- if (clk == &iva1_mpu_int_ifck) {
- div = 2;
- fixed = 1;
- }
-
- if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
- clk->rate = sys_ck.rate;
- return;
- }
-
- if (!fixed) {
- div = omap2_clksel_get_divisor(clk);
- if (div == 0)
- return;
- }
-
- if (div != 0) {
- if (unlikely(clk->rate == clk->parent->rate / div))
- return;
- clk->rate = clk->parent->rate / div;
- }
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
-}
-
-/*
- * Finds best divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
- */
-static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
- u32 src_rate, u32 tgt_rate)
-{
- int i, test_rate;
-
- if (div_array == NULL)
- return ~1;
-
- for (i=0; i < size; i++) {
- test_rate = src_rate / *div_array;
- if (test_rate <= tgt_rate)
- return *div_array;
- ++div_array;
- }
-
- return ~0; /* No acceptable divider */
-}
-
-/*
- * Find divisor for the given clock and target rate.
- *
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- */
-static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
- u32 *new_div)
-{
- u32 gfx_div[] = {2, 3, 4};
- u32 sysclkout_div[] = {1, 2, 4, 8, 16};
- u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
- u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
- u32 best_div = ~0, asize = 0;
- u32 *div_array = NULL;
-
- switch (tclk->flags & SRC_RATE_SEL_MASK) {
- case CM_GFX_SEL1:
- asize = 3;
- div_array = gfx_div;
- break;
- case CM_PLL_SEL1:
- return omap2_dpll_round_rate(target_rate);
- case CM_SYSCLKOUT_SEL1:
- asize = 5;
- div_array = sysclkout_div;
- break;
- case CM_CORE_SEL1:
- if(tclk == &dss1_fck){
- if(tclk->parent == &core_ck){
- asize = 10;
- div_array = dss1_div;
- } else {
- *new_div = 0; /* fixed clk */
- return(tclk->parent->rate);
- }
- } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
- if(tclk->parent == &core_ck){
- asize = 10;
- div_array = vylnq_div;
- } else {
- *new_div = 0; /* fixed clk */
- return(tclk->parent->rate);
- }
- }
- break;
- }
-
- best_div = omap2_divider_from_table(asize, div_array,
- tclk->parent->rate, target_rate);
- if (best_div == ~0){
- *new_div = 1;
- return best_div; /* signal error */
- }
-
- *new_div = best_div;
- return (tclk->parent->rate / best_div);
-}
-
-/* Given a clock and a rate apply a clock specific rounding function */
-static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 new_div = 0;
- int valid_rate;
-
- if (clk->flags & RATE_FIXED)
- return clk->rate;
-
- if (clk->flags & RATE_CKCTL) {
- valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
- return valid_rate;
- }
-
- if (clk->round_rate != 0)
- return clk->round_rate(clk, rate);
-
- return clk->rate;
-}
-
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
- */
-static u32 omap2_dll_force_needed(void)
-{
- u32 dll_state = SDRC_DLLA_CTRL; /* dlla and dllb are a set */
-
- if ((dll_state & (1 << 2)) == (1 << 2))
- return 1;
- else
- return 0;
-}
-
-static u32 omap2_reprogram_sdrc(u32 level, u32 force)
-{
- u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
- u32 prev = curr_perf_level, flags;
-
- if ((curr_perf_level == level) && !force)
- return prev;
-
- m_type = omap2_memory_get_type();
- slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
- fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
-
- if (level == PRCM_HALF_SPEED) {
- local_irq_save(flags);
- PRCM_VOLTSETUP = 0xffff;
- omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
- slow_dll_ctrl, m_type);
- curr_perf_level = PRCM_HALF_SPEED;
- local_irq_restore(flags);
- }
- if (level == PRCM_FULL_SPEED) {
- local_irq_save(flags);
- PRCM_VOLTSETUP = 0xffff;
- omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
- fast_dll_ctrl, m_type);
- curr_perf_level = PRCM_FULL_SPEED;
- local_irq_restore(flags);
- }
-
- return prev;
-}
-#endif /* OLD_CK */
-
static void omap2_dpll_recalc(struct clk *clk)
{
clk->rate = omap2_get_dpll_rate_24xx(clk);
@@ -656,359 +307,6 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
return highest_rate;
}
-#ifdef OLD_CK
-/*
- * omap2_convert_field_to_div() - turn field value into integer divider
- */
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
-{
- u32 i;
- u32 clkout_array[] = {1, 2, 4, 8, 16};
-
- if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
- for (i = 0; i < 5; i++) {
- if (field_val == i)
- return clkout_array[i];
- }
- return ~0;
- } else
- return field_val;
-}
-
-/*
- * Returns the CLKSEL divider register value
- * REVISIT: This should be cleaned up to work nicely with void __iomem *
- */
-static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
- struct clk *clk)
-{
- int ret = ~0;
- u32 reg_val, div_off;
- u32 div_addr = 0;
- u32 mask = ~0;
-
- div_off = clk->rate_offset;
-
- switch ((*div_sel & SRC_RATE_SEL_MASK)) {
- case CM_MPU_SEL1:
- div_addr = (u32)&CM_CLKSEL_MPU;
- mask = 0x1f;
- break;
- case CM_DSP_SEL1:
- div_addr = (u32)&CM_CLKSEL_DSP;
- if (cpu_is_omap2420()) {
- if ((div_off == 0) || (div_off == 8))
- mask = 0x1f;
- else if (div_off == 5)
- mask = 0x3;
- } else if (cpu_is_omap2430()) {
- if (div_off == 0)
- mask = 0x1f;
- else if (div_off == 5)
- mask = 0x3;
- }
- break;
- case CM_GFX_SEL1:
- div_addr = (u32)&CM_CLKSEL_GFX;
- if (div_off == 0)
- mask = 0x7;
- break;
- case CM_MODEM_SEL1:
- div_addr = (u32)&CM_CLKSEL_MDM;
- if (div_off == 0)
- mask = 0xf;
- break;
- case CM_SYSCLKOUT_SEL1:
- div_addr = (u32)&PRCM_CLKOUT_CTRL;
- if ((div_off == 3) || (div_off == 11))
- mask= 0x3;
- break;
- case CM_CORE_SEL1:
- div_addr = (u32)&CM_CLKSEL1_CORE;
- switch (div_off) {
- case 0: /* l3 */
- case 8: /* dss1 */
- case 15: /* vylnc-2420 */
- case 20: /* ssi */
- mask = 0x1f; break;
- case 5: /* l4 */
- mask = 0x3; break;
- case 13: /* dss2 */
- mask = 0x1; break;
- case 25: /* usb */
- mask = 0x7; break;
- }
- }
-
- *field_mask = mask;
-
- if (unlikely(mask == ~0))
- div_addr = 0;
-
- *div_sel = div_addr;
-
- if (unlikely(div_addr == 0))
- return ret;
-
- /* Isolate field */
- reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
-
- /* Normalize back to divider value */
- reg_val >>= div_off;
-
- return reg_val;
-}
-
-/*
- * Return divider to be applied to parent clock.
- * Return 0 on error.
- */
-static u32 omap2_clksel_get_divisor(struct clk *clk)
-{
- int ret = 0;
- u32 div, div_sel, div_off, field_mask, field_val;
-
- /* isolate control register */
- div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-
- div_off = clk->rate_offset;
- field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
- if (div_sel == 0)
- return ret;
-
- div_sel = (SRC_RATE_SEL_MASK & clk->flags);
- div = omap2_clksel_to_divisor(div_sel, field_val);
-
- return div;
-}
-
-/* Set the clock rate for a clock source */
-static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
-
-{
- int ret = -EINVAL;
- void __iomem * reg;
- u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
- u32 new_div = 0;
-
- if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
- if (clk == &dpll_ck)
- return omap2_reprogram_dpll(clk, rate);
-
- /* Isolate control register */
- div_sel = (SRC_RATE_SEL_MASK & clk->flags);
- div_off = clk->rate_offset;
-
- validrate = omap2_clksel_round_rate(clk, rate, &new_div);
- if (validrate != rate)
- return(ret);
-
- field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
- if (div_sel == 0)
- return ret;
-
- if (clk->flags & CM_SYSCLKOUT_SEL1) {
- switch (new_div) {
- case 16:
- field_val = 4;
- break;
- case 8:
- field_val = 3;
- break;
- case 4:
- field_val = 2;
- break;
- case 2:
- field_val = 1;
- break;
- case 1:
- field_val = 0;
- break;
- }
- } else
- field_val = new_div;
-
- reg = (void __iomem *)div_sel;
-
- reg_val = __raw_readl(reg);
- reg_val &= ~(field_mask << div_off);
- reg_val |= (field_val << div_off);
- __raw_writel(reg_val, reg);
- wmb();
- clk->rate = clk->parent->rate / field_val;
-
- if (clk->flags & DELAYED_APP) {
- __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
- wmb();
- }
- ret = 0;
- } else if (clk->set_rate != 0)
- ret = clk->set_rate(clk, rate);
-
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
-
- return ret;
-}
-
-/* Converts encoded control register address into a full address */
-static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
- struct clk *src_clk, u32 *field_mask)
-{
- u32 val = ~0, src_reg_addr = 0, mask = 0;
-
- /* Find target control register.*/
- switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
- case CM_CORE_SEL1:
- src_reg_addr = (u32)&CM_CLKSEL1_CORE;
- if (reg_offset == 13) { /* DSS2_fclk */
- mask = 0x1;
- if (src_clk == &sys_ck)
- val = 0;
- if (src_clk == &func_48m_ck)
- val = 1;
- } else if (reg_offset == 8) { /* DSS1_fclk */
- mask = 0x1f;
- if (src_clk == &sys_ck)
- val = 0;
- else if (src_clk == &core_ck) /* divided clock */
- val = 0x10; /* rate needs fixing */
- } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
- mask = 0x1F;
- if(src_clk == &func_96m_ck)
- val = 0;
- else if (src_clk == &core_ck)
- val = 0x10;
- }
- break;
- case CM_CORE_SEL2:
- src_reg_addr = (u32)&CM_CLKSEL2_CORE;
- mask = 0x3;
- if (src_clk == &func_32k_ck)
- val = 0x0;
- if (src_clk == &sys_ck)
- val = 0x1;
- if (src_clk == &alt_ck)
- val = 0x2;
- break;
- case CM_WKUP_SEL1:
- src_reg_addr = (u32)&CM_CLKSEL_WKUP;
- mask = 0x3;
- if (src_clk == &func_32k_ck)
- val = 0x0;
- if (src_clk == &sys_ck)
- val = 0x1;
- if (src_clk == &alt_ck)
- val = 0x2;
- break;
- case CM_PLL_SEL1:
- src_reg_addr = (u32)&CM_CLKSEL1_PLL;
- mask = 0x1;
- if (reg_offset == 0x3) {
- if (src_clk == &apll96_ck)
- val = 0;
- if (src_clk == &alt_ck)
- val = 1;
- }
- else if (reg_offset == 0x5) {
- if (src_clk == &apll54_ck)
- val = 0;
- if (src_clk == &alt_ck)
- val = 1;
- }
- break;
- case CM_PLL_SEL2:
- src_reg_addr = (u32)&CM_CLKSEL2_PLL;
- mask = 0x3;
- if (src_clk == &func_32k_ck)
- val = 0x0;
- if (src_clk == &dpll_ck)
- val = 0x2;
- break;
- case CM_SYSCLKOUT_SEL1:
- src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
- mask = 0x3;
- if (src_clk == &dpll_ck)
- val = 0;
- if (src_clk == &sys_ck)
- val = 1;
- if (src_clk == &func_96m_ck)
- val = 2;
- if (src_clk == &func_54m_ck)
- val = 3;
- break;
- }
-
- if (val == ~0) /* Catch errors in offset */
- *type_to_addr = 0;
- else
- *type_to_addr = src_reg_addr;
- *field_mask = mask;
-
- return val;
-}
-
-static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
-{
- void __iomem * reg;
- u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
- int ret = -EINVAL;
-
- if (unlikely(clk->flags & CONFIG_PARTICIPANT))
- return ret;
-
- if (clk->flags & SRC_SEL_MASK) { /* On-chip SEL collection */
- src_sel = (SRC_RATE_SEL_MASK & clk->flags);
- src_off = clk->src_offset;
-
- if (src_sel == 0)
- goto set_parent_error;
-
- field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
- &field_mask);
-
- reg = (void __iomem *)src_sel;
-
- if (clk->usecount > 0)
- _omap2_clk_disable(clk);
-
- /* Set new source value (previous dividers if any in effect) */
- reg_val = __raw_readl(reg) & ~(field_mask << src_off);
- reg_val |= (field_val << src_off);
- __raw_writel(reg_val, reg);
- wmb();
-
- if (clk->flags & DELAYED_APP) {
- __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
- wmb();
- }
- if (clk->usecount > 0)
- _omap2_clk_enable(clk);
-
- clk->parent = new_parent;
-
- /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
- if ((new_parent == &core_ck) && (clk == &dss1_fck))
- clk->rate = new_parent->rate / 0x10;
- else
- clk->rate = new_parent->rate;
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
-
- return 0;
- } else {
- clk->parent = new_parent;
- rate = new_parent->rate;
- omap2_clk_set_rate(clk, rate);
- ret = 0;
- }
-
- set_parent_error:
- return ret;
-}
-#endif /* OLD_CK */
-
/* Sets basic clocks based on the specified rate */
static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
{
@@ -1090,26 +388,6 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
return 0;
}
-/*-------------------------------------------------------------------------
- * Omap2 clock reset and init functions
- *-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_clk_disable_unused(struct clk *clk)
-{
- u32 regval32;
-
- regval32 = __raw_readl(clk->enable_reg);
- if ((regval32 & (1 << clk->enable_bit)) == 0)
- return;
-
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
- _omap2_clk_disable(clk);
-}
-#else
-#define omap2_clk_disable_unused NULL
-#endif
-
static struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-15 09:20:26 +0000