diff options
46 files changed, 248 insertions, 220 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3a268127b05..bc50899e0c8 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -81,7 +81,8 @@ PA31 TXD4 Required properties for pin configuration node: - atmel,pins: 4 integers array, represents a group of pins mux and config setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>. - The PERIPH 0 means gpio. + The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... + PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... Bits used for CONFIG: PULL_UP (1 << 0): indicate this pin need a pull up. @@ -126,7 +127,7 @@ pinctrl@fffff400 { pinctrl_dbgu: dbgu-0 { atmel,pins = <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + 1 15 0x1 0x1>; /* PB15 periph A with pullup */ }; }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 00044026ef1..9b82facb256 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x40000000>; /* 1 GB */ }; soc { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 271855a6e22..e041f42ed71 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,27 +50,25 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>; + interrupts = <87>, <88>, <89>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1c1937dbce7..9e23bd8c953 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,39 +51,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 4905cf3a5ef..965966110e3 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,39 +66,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index e154f242c68..222047f1ece 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -336,8 +336,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 25 0 /* sda */ + &pioA 26 0 /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 3a47cf95214..8ecca6948d8 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -143,6 +143,11 @@ atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; }; usart1 { @@ -154,12 +159,17 @@ pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 27 0x3 0x0>; /* PC27 periph C */ + <2 27 0x3 0x0>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 28 0x3 0x0>; /* PC28 periph C */ + <2 28 0x3 0x0>; /* PC28 periph C */ + }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <2 28 0x3 0x0>; /* PC29 periph C */ }; }; @@ -172,46 +182,56 @@ pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 0 0x2 0x0>; /* PB0 periph B */ + <1 0 0x2 0x0>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 1 0x2 0x0>; /* PB1 periph B */ + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <1 2 0x2 0x0>; /* PB2 periph B */ }; }; usart3 { pinctrl_uart3: usart3-0 { atmel,pins = - <3 23 0x2 0x1 /* PC22 periph B with pullup */ - 3 23 0x2 0x0>; /* PC23 periph B */ + <2 23 0x2 0x1 /* PC22 periph B with pullup */ + 2 23 0x2 0x0>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 24 0x2 0x0>; /* PC24 periph B */ + <2 24 0x2 0x0>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 25 0x2 0x0>; /* PC25 periph B */ + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <2 26 0x2 0x0>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <3 8 0x3 0x0 /* PC8 periph C */ - 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + <2 8 0x3 0x0 /* PC8 periph C */ + 2 9 0x3 0x1>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <3 16 0x3 0x0 /* PC16 periph C */ - 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + <2 16 0x3 0x0 /* PC16 periph C */ + 2 17 0x3 0x1>; /* PC17 periph C with pullup */ }; }; @@ -240,14 +260,14 @@ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PA8 periph A */ - 1 11 0x1 0x0 /* PA11 periph A */ - 1 12 0x1 0x0 /* PA12 periph A */ - 1 13 0x1 0x0 /* PA13 periph A */ - 1 14 0x1 0x0 /* PA14 periph A */ - 1 15 0x1 0x0 /* PA15 periph A */ - 1 16 0x1 0x0 /* PA16 periph A */ - 1 17 0x1 0x0>; /* PA17 periph A */ + <1 8 0x1 0x0 /* PB8 periph A */ + 1 11 0x1 0x0 /* PB11 periph A */ + 1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ }; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index fddd1741743..46c09801703 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index fed7d3f9f43..cdee96fca6e 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -26,10 +26,15 @@ }; &uart0 { status = "okay"; }; -&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&sdio0 { + status = "okay"; + /* sdio0 card detect is connected to wrong pin on CuBox */ + cd-gpios = <&gpio0 12 1>; +}; + &spi0 { status = "okay"; @@ -42,9 +47,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; pinctrl-names = "default"; + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 942d5761ca9..e05b18f3c33 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 9bc6785ad22..77d21abfcdf 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,21 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 + &pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; + + pmx_ns2_sata0: pmx-ns2-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_ns2_sata1: pmx-ns2-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + }; + serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 110d6cbb795..d6ab442b701 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -36,6 +36,7 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -46,6 +47,7 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index e8814fe0e27..b4dc3ed9a3e 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -48,6 +48,8 @@ macb0: ethernet@fffc4000 { phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 8bbc2bfef22..8b36abea9f2 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -60,19 +60,21 @@ }; uart0: uart@01c28000 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1fc405a9ecf..cf8071ad22d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -45,7 +45,6 @@ reg = <1>; }; -/* A7s disabled till big.LITTLE patches are available... cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -63,7 +62,6 @@ compatible = "arm,cortex-a7"; reg = <0x102>; }; -*/ }; memory@80000000 { diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index b175577d7ab..1ea959019fc 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y +CONFIG_SOC_AT91SAM9N12=y CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 @@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 6809200c31f..14f7c3b1463 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,12 +100,14 @@ ENTRY(printch) b 1b ENDPROC(printch) +#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) +#endif #else diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 9ee866ce047..4b678478cf9 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3e628fd7a67..0a2349dc701 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -851,6 +851,7 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC + select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7f2c10c7413..c0c4e723b7f 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 7191ab4434e..fa36fb84ab1 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); extern void imx_cpu_die(unsigned int cpu); +extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 10b0ed39f07..25a47c616b2 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("imx-fb", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3dec962b077..7bc5fe15dda 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); - imx_enable_cpu(cpu, false); + cpu_do_idle(); +} - /* spin here until hardware takes it down */ - while (1) - ; +int imx_cpu_kill(unsigned int cpu) +{ + imx_enable_cpu(cpu, false); + return 1; } diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 6c80424f678..e05cf407db6 100644 --- a/arch/arm/mach-imx/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,8 +22,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/genalloc.h> - -#include "iram.h" +#include "linux/platform_data/imx-iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 3777b805b76..66fae885c84 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = { .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, #endif }; diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index a17543da602..ee42d20cba1 100644 --- a/arch/arm/mach-imx/pm-imx6q. |