diff options
| -rw-r--r-- | sound/pci/sis7019.c | 64 |
1 files changed, 53 insertions, 11 deletions
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index a391e622a19..28dfafb56dd 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -41,6 +41,7 @@ MODULE_SUPPORTED_DEVICE("{{SiS,SiS7019 Audio Accelerator}}"); static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ static int enable = 1; +static int codecs = 1; module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator."); @@ -48,6 +49,8 @@ module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator."); module_param(enable, bool, 0444); MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator."); +module_param(codecs, int, 0444); +MODULE_PARM_DESC(codecs, "Set bit to indicate that codec number is expected to be present (default 1)"); static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) }, @@ -140,6 +143,9 @@ struct sis7019 { dma_addr_t silence_dma_addr; }; +/* These values are also used by the module param 'codecs' to indicate + * which codecs should be present. + */ #define SIS_PRIMARY_CODEC_PRESENT 0x0001 #define SIS_SECONDARY_CODEC_PRESENT 0x0002 #define SIS_TERTIARY_CODEC_PRESENT 0x0004 @@ -1078,6 +1084,7 @@ static int sis_chip_init(struct sis7019 *sis) { unsigned long io = sis->ioport; void __iomem *ioaddr = sis->ioaddr; + unsigned long timeout; u16 status; int count; int i; @@ -1104,21 +1111,45 @@ static int sis_chip_init(struct sis7019 *sis) while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) udelay(1); + /* Command complete, we can let go of the semaphore now. + */ + outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); + if (!count) + return -EIO; + /* Now that we've finished the reset, find out what's attached. + * There are some codec/board combinations that take an extremely + * long time to come up. 350+ ms has been observed in the field, + * so we'll give them up to 500ms. */ - status = inl(io + SIS_AC97_STATUS); - if (status & SIS_AC97_STATUS_CODEC_READY) - sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC2_READY) - sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC3_READY) - sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; - - /* All done, let go of the semaphore, and check for errors + sis->codecs_present = 0; + timeout = msecs_to_jiffies(500) + jiffies; + while (time_before_eq(jiffies, timeout)) { + status = inl(io + SIS_AC97_STATUS); + if (status & SIS_AC97_STATUS_CODEC_READY) + sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC2_READY) + sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC3_READY) + sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; + + if (sis->codecs_present == codecs) + break; + + msleep(1); + } + + /* All done, check for errors. */ - outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); - if (!sis->codecs_present || !count) + if (!sis->codecs_present) { + printk(KERN_ERR "sis7019: could not find any codecs\n"); return -EIO; + } + + if (sis->codecs_present != codecs) { + printk(KERN_WARNING "sis7019: missing codecs, found %0x, expected %0x\n", + sis->codecs_present, codecs); + } /* Let the hardware know that the audio driver is alive, * and enable PCM slots on the AC-link for L/R playback (3 & 4) and @@ -1390,6 +1421,17 @@ static int __devinit snd_sis7019_probe(struct pci_dev *pci, if (!enable) goto error_out; + /* The user can specify which codecs should be present so that we + * can wait for them to show up if they are slow to recover from + * the AC97 cold reset. We default to a single codec, the primary. + * + * We assume that SIS_PRIMARY_*_PRESENT matches bits 0-2. + */ + codecs &= SIS_PRIMARY_CODEC_PRESENT | SIS_SECONDARY_CODEC_PRESENT | + SIS_TERTIARY_CODEC_PRESENT; + if (!codecs) + codecs = SIS_PRIMARY_CODEC_PRESENT; + rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card); if (rc < 0) goto error_out; |