diff options
62 files changed, 1192 insertions, 1482 deletions
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 64adb98b181..57566bacb4c 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,13 @@ +Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 00.00.06.14-rc1 +Old Version : 00.00.06.12-rc1 + 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380. + 2. Mask off flags in ioctl path to prevent memory scribble with older + MegaCLI versions. + 3. Remove poll_mode_io module paramater, sysfs node, and associated code. +------------------------------------------------------------------------------- Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx index 494980e4049..ab899591ecb 100644 --- a/Documentation/scsi/LICENSE.qla4xxx +++ b/Documentation/scsi/LICENSE.qla4xxx @@ -1,32 +1,11 @@ Copyright (c) 2003-2011 QLogic Corporation -QLogic Linux iSCSI HBA Driver +QLogic Linux iSCSI Driver This program includes a device driver for Linux 3.x. You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. - EXHIBIT A diff --git a/MAINTAINERS b/MAINTAINERS index fa3f5e6a608..89b70df91f4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7200,7 +7200,7 @@ S: Maintained F: drivers/net/vmxnet3/ VMware PVSCSI driver -M: Alok Kataria <akataria@vmware.com> +M: Arvind Kumar <arvindkumar@vmware.com> M: VMware PV-Drivers <pv-drivers@vmware.com> L: linux-scsi@vger.kernel.org S: Maintained diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 06ea3bcfdd2..16570aa84aa 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -830,16 +830,11 @@ config SCSI_ISCI tristate "Intel(R) C600 Series Chipset SAS Controller" depends on PCI && SCSI depends on X86 - # (temporary): known alpha quality driver - depends on EXPERIMENTAL select SCSI_SAS_LIBSAS - select SCSI_SAS_HOST_SMP ---help--- This driver supports the 6Gb/s SAS capabilities of the storage control unit found in the Intel(R) C600 series chipset. - The experimental tag will be removed after the driver exits alpha - config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h index 78963be2c4f..cb07c628b2f 100644 --- a/drivers/scsi/bfa/bfa_defs_svc.h +++ b/drivers/scsi/bfa/bfa_defs_svc.h @@ -673,12 +673,7 @@ struct bfa_itnim_iostats_s { u32 tm_iocdowns; /* TM cleaned-up due to IOC down */ u32 tm_cleanups; /* TM cleanup requests */ u32 tm_cleanup_comps; /* TM cleanup completions */ - u32 lm_lun_across_sg; /* LM lun is across sg data buf */ - u32 lm_lun_not_sup; /* LM lun not supported */ - u32 lm_rpl_data_changed; /* LM report-lun data changed */ - u32 lm_wire_residue_changed; /* LM report-lun rsp residue changed */ - u32 lm_small_buf_addresidue; /* LM buf smaller than reported cnt */ - u32 lm_lun_not_rdy; /* LM lun not ready */ + u32 rsvd[6]; }; /* Modify char* port_stt[] in bfal_port.c if a new state was added */ diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h index 50b6a1c8619..8d0b88f67a3 100644 --- a/drivers/scsi/bfa/bfa_fc.h +++ b/drivers/scsi/bfa/bfa_fc.h @@ -56,161 +56,6 @@ struct scsi_cdb_s { #define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length */ -#define SCSI_SENSE_CUR_ERR 0x70 -#define SCSI_SENSE_DEF_ERR 0x71 - -/* - * SCSI additional sense codes - */ -#define SCSI_ASC_LUN_NOT_READY 0x04 -#define SCSI_ASC_LUN_NOT_SUPPORTED 0x25 -#define SCSI_ASC_TOCC 0x3F - -/* - * SCSI additional sense code qualifiers - */ -#define SCSI_ASCQ_MAN_INTR_REQ 0x03 /* manual intervention req */ -#define SCSI_ASCQ_RL_DATA_CHANGED 0x0E /* report luns data changed */ - -/* - * Methods of reporting informational exceptions - */ -#define SCSI_MP_IEC_UNIT_ATTN 0x2 /* generate unit attention */ - -struct scsi_report_luns_data_s { - u32 lun_list_length; /* length of LUN list length */ - u32 reserved; - struct scsi_lun lun[1]; /* first LUN in lun list */ -}; - -struct scsi_inquiry_vendor_s { - u8 vendor_id[8]; -}; - -struct scsi_inquiry_prodid_s { - u8 product_id[16]; -}; - -struct scsi_inquiry_prodrev_s { - u8 product_rev[4]; -}; - -struct scsi_inquiry_data_s { -#ifdef __BIG_ENDIAN - u8 peripheral_qual:3; /* peripheral qualifier */ - u8 device_type:5; /* peripheral device type */ - u8 rmb:1; /* removable medium bit */ - u8 device_type_mod:7; /* device type modifier */ - u8 version; - u8 aenc:1; /* async evt notification capability */ - u8 trm_iop:1; /* terminate I/O process */ - u8 norm_aca:1; /* normal ACA supported */ - u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */ - u8 rsp_data_format:4; - u8 additional_len; - u8 sccs:1; - u8 reserved1:7; - u8 reserved2:1; - u8 enc_serv:1; /* enclosure service component */ - u8 reserved3:1; - u8 multi_port:1; /* multi-port device */ - u8 m_chngr:1; /* device in medium transport element */ - u8 ack_req_q:1; /* SIP specific bit */ - u8 addr32:1; /* SIP specific bit */ - u8 addr16:1; /* SIP specific bit */ - u8 rel_adr:1; /* relative address */ - u8 w_bus32:1; - u8 w_bus16:1; - u8 synchronous:1; - u8 linked_commands:1; - u8 trans_dis:1; - u8 cmd_queue:1; /* command queueing supported */ - u8 soft_reset:1; /* soft reset alternative (VS) */ -#else - u8 device_type:5; /* peripheral device type */ - u8 peripheral_qual:3; /* peripheral qualifier */ - u8 device_type_mod:7; /* device type modifier */ - u8 rmb:1; /* removable medium bit */ - u8 version; - u8 rsp_data_format:4; - u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */ - u8 norm_aca:1; /* normal ACA supported */ - u8 terminate_iop:1;/* terminate I/O process */ - u8 aenc:1; /* async evt notification capability */ - u8 additional_len; - u8 reserved1:7; - u8 sccs:1; - u8 addr16:1; /* SIP specific bit */ - u8 addr32:1; /* SIP specific bit */ - u8 ack_req_q:1; /* SIP specific bit */ - u8 m_chngr:1; /* device in medium transport element */ - u8 multi_port:1; /* multi-port device */ - u8 reserved3:1; /* TBD - Vendor Specific */ - u8 enc_serv:1; /* enclosure service component */ - u8 reserved2:1; - u8 soft_seset:1; /* soft reset alternative (VS) */ - u8 cmd_queue:1; /* command queueing supported */ - u8 trans_dis:1; - u8 linked_commands:1; - u8 synchronous:1; - u8 w_bus16:1; - u8 w_bus32:1; - u8 rel_adr:1; /* relative address */ -#endif - struct scsi_inquiry_vendor_s vendor_id; - struct scsi_inquiry_prodid_s product_id; - struct scsi_inquiry_prodrev_s product_rev; - u8 vendor_specific[20]; - u8 reserved4[40]; -}; - -/* - * SCSI sense data format - */ -struct scsi_sense_s { -#ifdef __BIG_ENDIAN - u8 valid:1; - u8 rsp_code:7; -#else - u8 rsp_code:7; - u8 valid:1; -#endif - u8 seg_num; -#ifdef __BIG_ENDIAN - u8 file_mark:1; - u8 eom:1; /* end of media */ - u8 ili:1; /* incorrect length indicator */ - u8 reserved:1; - u8 sense_key:4; -#else - u8 sense_key:4; - u8 reserved:1; - u8 ili:1; /* incorrect length indicator */ - u8 eom:1; /* end of media */ - u8 file_mark:1; -#endif - u8 information[4]; /* device-type or cmd specific info */ - u8 add_sense_length; /* additional sense length */ - u8 command_info[4];/* command specific information */ - u8 asc; /* additional sense code */ - u8 ascq; /* additional sense code qualifier */ - u8 fru_code; /* field replaceable unit code */ -#ifdef __BIG_ENDIAN - u8 sksv:1; /* sense key specific valid */ - u8 c_d:1; /* command/data bit */ - u8 res1:2; - u8 bpv:1; /* bit pointer valid */ - u8 bpointer:3; /* bit pointer */ -#else - u8 bpointer:3; /* bit pointer */ - u8 bpv:1; /* bit pointer valid */ - u8 res1:2; - u8 c_d:1; /* command/data bit */ - u8 sksv:1; /* sense key specific valid */ -#endif - u8 fpointer[2]; /* field pointer */ -}; - /* * Fibre Channel Header Structure (FCHS) definition */ diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c index e07bd4745d8..f0f80e282e3 100644 --- a/drivers/scsi/bfa/bfa_fcpim.c +++ b/drivers/scsi/bfa/bfa_fcpim.c @@ -24,8 +24,6 @@ BFA_TRC_FILE(HAL, FCPIM); * BFA ITNIM Related definitions */ static void bfa_itnim_update_del_itn_stats(struct bfa_itnim_s *itnim); -static bfa_boolean_t bfa_ioim_lm_proc_rpl_data(struct bfa_ioim_s *ioim); -static bfa_boolean_t bfa_ioim_lm_proc_inq_data(struct bfa_ioim_s *ioim); static void bfa_ioim_lm_init(struct bfa_s *bfa); #define BFA_ITNIM_FROM_TAG(_fcpim, _tag) \ @@ -60,14 +58,6 @@ static void bfa_ioim_lm_init(struct bfa_s *bfa); } \ } while (0) -#define bfa_ioim_rp_wwn(__ioim) \ - (((struct bfa_fcs_rport_s *) \ - (__ioim)->itnim->rport->rport_drv)->pwwn) - -#define bfa_ioim_lp_wwn(__ioim) \ - ((BFA_LPS_FROM_TAG(BFA_LPS_MOD((__ioim)->bfa), \ - (__ioim)->itnim->rport->rport_info.lp_tag))->pwwn) \ - #define bfa_itnim_sler_cb(__itnim) do { \ if ((__itnim)->bfa->fcs) \ bfa_cb_itnim_sler((__itnim)->ditn); \ @@ -77,13 +67,6 @@ static void bfa_ioim_lm_init(struct bfa_s *bfa); } \ } while (0) -enum bfa_ioim_lm_status { - BFA_IOIM_LM_PRESENT = 1, - BFA_IOIM_LM_LUN_NOT_SUP = 2, - BFA_IOIM_LM_RPL_DATA_CHANGED = 3, - BFA_IOIM_LM_LUN_NOT_RDY = 4, -}; - enum bfa_ioim_lm_ua_status { BFA_IOIM_LM_UA_RESET = 0, BFA_IOIM_LM_UA_SET = 1, @@ -145,9 +128,6 @@ enum bfa_ioim_event { BFA_IOIM_SM_TMDONE = 16, /* IO cleanup from tskim */ BFA_IOIM_SM_HWFAIL = 17, /* IOC h/w failure event */ BFA_IOIM_SM_IOTOV = 18, /* ITN offline TOV */ - BFA_IOIM_SM_LM_LUN_NOT_SUP = 19,/* lunmask lun not supported */ - BFA_IOIM_SM_LM_RPL_DC = 20, /* lunmask report-lun data changed */ - BFA_IOIM_SM_LM_LUN_NOT_RDY = 21,/* lunmask lun not ready */ }; @@ -245,9 +225,6 @@ static void __bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete); static void __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete); static void __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete); static bfa_boolean_t bfa_ioim_is_abortable(struct bfa_ioim_s *ioim); -static void __bfa_cb_ioim_lm_lun_not_sup(void *cbarg, bfa_boolean_t complete); -static void __bfa_cb_ioim_lm_rpl_dc(void *cbarg, bfa_boolean_t complete); -static void __bfa_cb_ioim_lm_lun_not_rdy(void *cbarg, bfa_boolean_t complete); /* * forward declaration of BFA IO state machine @@ -445,12 +422,6 @@ bfa_fcpim_add_stats(struct bfa_itnim_iostats_s *lstats, bfa_fcpim_add_iostats(lstats, rstats, output_reqs); bfa_fcpim_add_iostats(lstats, rstats, rd_throughput); bfa_fcpim_add_iostats(lstats, rstats, wr_throughput); - bfa_fcpim_add_iostats(lstats, rstats, lm_lun_across_sg); - bfa_fcpim_add_iostats(lstats, rstats, lm_lun_not_sup); - bfa_fcpim_add_iostats(lstats, rstats, lm_rpl_data_changed); - bfa_fcpim_add_iostats(lstats, rstats, lm_wire_residue_changed); - bfa_fcpim_add_iostats(lstats, rstats, lm_small_buf_addresidue); - bfa_fcpim_add_iostats(lstats, rstats, lm_lun_not_rdy); } bfa_status_t @@ -1580,27 +1551,6 @@ bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) __bfa_cb_ioim_abort, ioim); break; - case BFA_IOIM_SM_LM_LUN_NOT_SUP: - bfa_sm_set_state(ioim, bfa_ioim_sm_hcb); - bfa_ioim_move_to_comp_q(ioim); - bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, - __bfa_cb_ioim_lm_lun_not_sup, ioim); - break; - - case BFA_IOIM_SM_LM_RPL_DC: - bfa_sm_set_state(ioim, bfa_ioim_sm_hcb); - bfa_ioim_move_to_comp_q(ioim); - bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, - __bfa_cb_ioim_lm_rpl_dc, ioim); - break; - - case BFA_IOIM_SM_LM_LUN_NOT_RDY: - bfa_sm_set_state(ioim, bfa_ioim_sm_hcb); - bfa_ioim_move_to_comp_q(ioim); - bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, - __bfa_cb_ioim_lm_lun_not_rdy, ioim); - break; - default: bfa_sm_fault(ioim->bfa, event); } @@ -2160,243 +2110,6 @@ bfa_ioim_lm_init(struct bfa_s *bfa) } } -/* - * Validate LUN for LUN masking - */ -static enum bfa_ioim_lm_status -bfa_ioim_lm_check(struct bfa_ioim_s *ioim, struct bfa_lps_s *lps, - struct bfa_rport_s *rp, struct scsi_lun lun) -{ - u8 i; - struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(ioim->bfa); - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct scsi_cdb_s *cdb = (struct scsi_cdb_s *)cmnd->cmnd; - - if ((cdb->scsi_cdb[0] == REPORT_LUNS) && - (scsilun_to_int((struct scsi_lun *)&lun) == 0)) { - ioim->proc_rsp_data = bfa_ioim_lm_proc_rpl_data; - return BFA_IOIM_LM_PRESENT; - } - - for (i = 0; i < MAX_LUN_MASK_CFG; i++) { - - if (lun_list[i].state != BFA_IOIM_LUN_MASK_ACTIVE) - continue; - - if ((scsilun_to_int((struct scsi_lun *)&lun_list[i].lun) == - scsilun_to_int((struct scsi_lun *)&lun)) - && (rp->rport_tag == lun_list[i].rp_tag) - && ((u8)ioim->itnim->rport->rport_info.lp_tag == - lun_list[i].lp_tag)) { - bfa_trc(ioim->bfa, lun_list[i].rp_tag); - bfa_trc(ioim->bfa, lun_list[i].lp_tag); - bfa_trc(ioim->bfa, scsilun_to_int( - (struct scsi_lun *)&lun_list[i].lun)); - - if ((lun_list[i].ua == BFA_IOIM_LM_UA_SET) && - ((cdb->scsi_cdb[0] != INQUIRY) || - (cdb->scsi_cdb[0] != REPORT_LUNS))) { - lun_list[i].ua = BFA_IOIM_LM_UA_RESET; - return BFA_IOIM_LM_RPL_DATA_CHANGED; - } - - if (cdb->scsi_cdb[0] == REPORT_LUNS) - ioim->proc_rsp_data = bfa_ioim_lm_proc_rpl_data; - - return BFA_IOIM_LM_PRESENT; - } - } - - if ((cdb->scsi_cdb[0] == INQUIRY) && - (scsilun_to_int((struct scsi_lun *)&lun) == 0)) { - ioim->proc_rsp_data = bfa_ioim_lm_proc_inq_data; - return BFA_IOIM_LM_PRESENT; - } - - if (cdb->scsi_cdb[0] == TEST_UNIT_READY) - return BFA_IOIM_LM_LUN_NOT_RDY; - - return BFA_IOIM_LM_LUN_NOT_SUP; -} - -static bfa_boolean_t -bfa_ioim_lm_proc_rsp_data_dummy(struct bfa_ioim_s *ioim) -{ - return BFA_TRUE; -} - -static void -bfa_ioim_lm_fetch_lun(struct bfa_ioim_s *ioim, u8 *rl_data, int offset, - int buf_lun_cnt) -{ - struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(ioim->bfa); - struct scsi_lun *lun_data = (struct scsi_lun *)(rl_data + offset); - struct scsi_lun lun; - int i, j; - - bfa_trc(ioim->bfa, buf_lun_cnt); - for (j = 0; j < buf_lun_cnt; j++) { - lun = *((struct scsi_lun *)(lun_data + j)); - for (i = 0; i < MAX_LUN_MASK_CFG; i++) { - if (lun_list[i].state != BFA_IOIM_LUN_MASK_ACTIVE) - continue; - if ((lun_list[i].rp_wwn == bfa_ioim_rp_wwn(ioim)) && - (lun_list[i].lp_wwn == bfa_ioim_lp_wwn(ioim)) && - (scsilun_to_int((struct scsi_lun *)&lun_list[i].lun) - == scsilun_to_int((struct scsi_lun *)&lun))) { - lun_list[i].state = BFA_IOIM_LUN_MASK_FETCHED; - break; - } - } /* next lun in mask DB */ - } /* next lun in buf */ -} - -static int -bfa_ioim_lm_update_lun_sg(struct bfa_ioim_s *ioim, u32 *pgdlen, - struct scsi_report_luns_data_s *rl) -{ - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct scatterlist *sg = scsi_sglist(cmnd); - struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(ioim->bfa); - struct scsi_lun *prev_rl_data = NULL, *base_rl_data; - int i, j, sgeid, lun_fetched_cnt = 0, prev_sg_len = 0, base_count; - int lun_across_sg_bytes, bytes_from_next_buf; - u64 last_lun, temp_last_lun; - - /* fetch luns from the first sg element */ - bfa_ioim_lm_fetch_lun(ioim, (u8 *)(rl->lun), 0, - (sg_dma_len(sg) / sizeof(struct scsi_lun)) - 1); - - /* fetch luns from multiple sg elements */ - scsi_for_each_sg(cmnd, sg, scsi_sg_count(cmnd), sgeid) { - if (sgeid == 0) { - prev_sg_len = sg_dma_len(sg); - prev_rl_data = (struct scsi_lun *) - phys_to_virt(sg_dma_address(sg)); - continue; - } - - /* if the buf is having more data */ - lun_across_sg_bytes = prev_sg_len % sizeof(struct scsi_lun); - if (lun_across_sg_bytes) { - bfa_trc(ioim->bfa, lun_across_sg_bytes); - bfa_stats(ioim->itnim, lm_lun_across_sg); - bytes_from_next_buf = sizeof(struct scsi_lun) - - lun_across_sg_bytes; - - /* from next buf take higher bytes */ - temp_last_lun = *((u64 *) - phys_to_virt(sg_dma_address(sg))); - last_lun |= temp_last_lun >> - (lun_across_sg_bytes * BITS_PER_BYTE); - - /* from prev buf take higher bytes */ - temp_last_lun = *((u64 *)(prev_rl_data + - (prev_sg_len - lun_across_sg_bytes))); - temp_last_lun >>= bytes_from_next_buf * BITS_PER_BYTE; - last_lun = last_lun | (temp_last_lun << - (bytes_from_next_buf * BITS_PER_BYTE)); - - bfa_ioim_lm_fetch_lun(ioim, (u8 *)&last_lun, 0, 1); - } else - bytes_from_next_buf = 0; - - *pgdlen += sg_dma_len(sg); - prev_sg_len = sg_dma_len(sg); - prev_rl_data = (struct scsi_lun *) - phys_to_virt(sg_dma_address(sg)); - bfa_ioim_lm_fetch_lun(ioim, (u8 *)prev_rl_data, - bytes_from_next_buf, - sg_dma_len(sg) / sizeof(struct scsi_lun)); - } - - /* update the report luns data - based on fetched luns */ - sg = scsi_sglist(cmnd); - base_rl_data = (struct scsi_lun *)rl->lun; - base_count = (sg_dma_len(sg) / sizeof(struct scsi_lun)) - 1; - for (i = 0, j = 0; i < MAX_LUN_MASK_CFG; i++) { - if (lun_list[i].state == BFA_IOIM_LUN_MASK_FETCHED) { - base_rl_data[j] = lun_list[i].lun; - lun_list[i].state = BFA_IOIM_LUN_MASK_ACTIVE; - j++; - lun_fetched_cnt++; - } - - if (j > base_count) { - j = 0; - sg = sg_next(sg); - base_rl_data = (struct scsi_lun *) - phys_to_virt(sg_dma_address(sg)); - base_count = sg_dma_len(sg) / sizeof(struct scsi_lun); - } - } - - bfa_trc(ioim->bfa, lun_fetched_cnt); - return lun_fetched_cnt; -} - -static bfa_boolean_t -bfa_ioim_lm_proc_inq_data(struct bfa_ioim_s *ioim) -{ - struct scsi_inquiry_data_s *inq; - struct scatterlist *sg = scsi_sglist((struct scsi_cmnd *)ioim->dio); - - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; - inq = (struct scsi_inquiry_data_s *)phys_to_virt(sg_dma_address(sg)); - - bfa_trc(ioim->bfa, inq->device_type); - inq->peripheral_qual = SCSI_INQ_PQ_NOT_CON; - return 0; -} - -static bfa_boolean_t -bfa_ioim_lm_proc_rpl_data(struct bfa_ioim_s *ioim) -{ - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct scatterlist *sg = scsi_sglist(cmnd); - struct bfi_ioim_rsp_s *m; - struct scsi_report_luns_data_s *rl = NULL; - int lun_count = 0, lun_fetched_cnt = 0; - u32 residue, pgdlen = 0; - - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; - if (bfa_get_lun_mask_status(ioim->bfa) != BFA_LUNMASK_ENABLED) - return BFA_TRUE; - - m = (struct bfi_ioim_rsp_s *) &ioim->iosp->comp_rspmsg; - if (m->scsi_status == SCSI_STATUS_CHECK_CONDITION) - return BFA_TRUE; - - pgdlen = sg_dma_len(sg); - bfa_trc(ioim->bfa, pgdlen); - rl = (struct scsi_report_luns_data_s *)phys_to_virt(sg_dma_address(sg)); - lun_count = cpu_to_be32(rl->lun_list_length) / sizeof(struct scsi_lun); - lun_fetched_cnt = bfa_ioim_lm_update_lun_sg(ioim, &pgdlen, rl); - - if (lun_count == lun_fetched_cnt) - return BFA_TRUE; - - bfa_trc(ioim->bfa, lun_count); - bfa_trc(ioim->bfa, lun_fetched_cnt); - bfa_trc(ioim->bfa, be32_to_cpu(rl->lun_list_length)); - - if (be32_to_cpu(rl->lun_list_length) <= pgdlen) - rl->lun_list_length = be32_to_cpu(lun_fetched_cnt) * - sizeof(struct scsi_lun); - else - bfa_stats(ioim->itnim, lm_small_buf_addresidue); - - bfa_trc(ioim->bfa, be32_to_cpu(rl->lun_list_length)); - bfa_trc(ioim->bfa, be32_to_cpu(m->residue)); - - residue = be32_to_cpu(m->residue); - residue += (lun_count - lun_fetched_cnt) * sizeof(struct scsi_lun); - bfa_stats(ioim->itnim, lm_wire_residue_changed); - m->residue = be32_to_cpu(residue); - bfa_trc(ioim->bfa, ioim->nsges); - return BFA_FALSE; -} - static void __bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete) { @@ -2454,83 +2167,6 @@ __bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete) m->scsi_status, sns_len, snsinfo, residue); } -static void -__bfa_cb_ioim_lm_lun_not_sup(void *cbarg, bfa_boolean_t complete) -{ - struct bfa_ioim_s *ioim = cbarg; - int sns_len = 0xD; - u32 residue = scsi_bufflen((struct scsi_cmnd *)ioim->dio); - struct scsi_sense_s *snsinfo; - - if (!complete) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB); - return; - } - - snsinfo = (struct scsi_sense_s *)BFA_SNSINFO_FROM_TAG( - ioim->fcpim->fcp, ioim->iotag); - snsinfo->rsp_code = SCSI_SENSE_CUR_ERR; - snsinfo->add_sense_length = 0xa; - snsinfo->asc = SCSI_ASC_LUN_NOT_SUPPORTED; - snsinfo->sense_key = ILLEGAL_REQUEST; - bfa_trc(ioim->bfa, residue); - bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_OK, - SCSI_STATUS_CHECK_CONDITION, sns_len, - (u8 *)snsinfo, residue); -} - -static void -__bfa_cb_ioim_lm_rpl_dc(void *cbarg, bfa_boolean_t complete) -{ - struct bfa_ioim_s *ioim = cbarg; - int sns_len = 0xD; - u32 residue = scsi_bufflen((struct scsi_cmnd *)ioim->dio); - struct scsi_sense_s *snsinfo; - - if (!complete) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB); - return; - } - - snsinfo = (struct scsi_sense_s *)BFA_SNSINFO_FROM_TAG(ioim->fcpim->fcp, - ioim->iotag); - snsinfo->rsp_code = SCSI_SENSE_CUR_ERR; - snsinfo->sense_key = SCSI_MP_IEC_UNIT_ATTN; - snsinfo->asc = SCSI_ASC_TOCC; - snsinfo->add_sense_length = 0x6; - snsinfo->ascq = SCSI_ASCQ_RL_DATA_CHANGED; - bfa_trc(ioim->bfa, residue); - bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_OK, - SCSI_STATUS_CHECK_CONDITION, sns_len, - (u8 *)snsinfo, residue); -} - -static void -__bfa_cb_ioim_lm_lun_not_rdy(void *cbarg, bfa_boolean_t complete) -{ - struct bfa_ioim_s *ioim = cbarg; - int sns_len = 0xD; - u32 residue = scsi_bufflen((struct scsi_cmnd *)ioim->dio); - struct scsi_sense_s *snsinfo; - - if (!complete) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB); - return; - } - - snsinfo = (struct scsi_sense_s *)BFA_SNSINFO_FROM_TAG( - ioim->fcpim->fcp, ioim->iotag); - snsinfo->rsp_code = SCSI_SENSE_CUR_ERR; - snsinfo->add_sense_length = 0xa; - snsinfo->sense_key = NOT_READY; - snsinfo->asc = SCSI_ASC_LUN_NOT_READY; - snsinfo->ascq = SCSI_ASCQ_MAN_INTR_REQ; - bfa_trc(ioim->bfa, residue); - bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_OK, - SCSI_STATUS_CHECK_CONDITION, sns_len, - (u8 *)snsinfo, residue); -} - void bfa_fcpim_lunmask_rp_update(struct bfa_s *bfa, wwn_t lp_wwn, wwn_t rp_wwn, u16 rp_tag, u8 lp_tag) @@ -2647,7 +2283,8 @@ bfa_fcpim_lunmask_add(struct bfa_s *bfa, u16 vf_id, wwn_t *pwwn, if (port) { *pwwn = port->port_cfg.pwwn; rp_fcs = bfa_fcs_lport_get_rport_by_pwwn(port, rpwwn); - rp = rp_fcs->bfa_rport; + if (rp_fcs) + rp = rp_fcs->bfa_rport; } lunm_list = bfa_get_lun_mask_list(bfa); @@ -2715,7 +2352,8 @@ bfa_fcpim_lunmask_delete(struct bfa_s *bfa, u16 vf_id, wwn_t *pwwn, if (port) { *pwwn = port->port_cfg.pwwn; rp_fcs = bfa_fcs_lport_get_rport_by_pwwn(port, rpwwn); - rp = rp_fcs->bfa_rport; + if (rp_fcs) + rp = rp_fcs->bfa_rport; } } @@ -2757,7 +2395,6 @@ __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete) return; } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_ABORTED, 0, 0, NULL, 0); } @@ -2773,7 +2410,6 @@ __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete) return; } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_PATHTOV, 0, 0, NULL, 0); } @@ -2788,7 +2424,6 @@ __bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete) return; } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_cb_ioim_abort(ioim->bfa->bfad, ioim->dio); } @@ -3132,7 +2767,6 @@ bfa_ioim_attach(struct bfa_fcpim_s *fcpim) ioim->bfa = fcpim->bfa; ioim->fcpim = fcpim; ioim->iosp = iosp; - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; INIT_LIST_HEAD(&ioim->sgpg_q); bfa_reqq_winit(&ioim->iosp->reqq_wait, bfa_ioim_qresume, ioim); @@ -3170,7 +2804,6 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m) evt = BFA_IOIM_SM_DONE; else evt = BFA_IOIM_SM_COMP; - ioim->proc_rsp_data(ioim); break; case BFI_IOIM_STS_TIMEDOUT: @@ -3206,7 +2839,6 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m) if (rsp->abort_tag != ioim->abort_tag) { bfa_trc(ioim->bfa, rsp->abort_tag); bfa_trc(ioim->bfa, ioim->abort_tag); - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; return; } @@ -3225,7 +2857,6 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m) WARN_ON(1); } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_sm_send_event(ioim, evt); } @@ -3244,15 +2875,7 @@ bfa_ioim_good_comp_isr(struct bfa_s *bfa, struct bfi_msg_s *m) bfa_ioim_cb_profile_comp(fcpim, ioim); - if (bfa_get_lun_mask_status(bfa) != BFA_LUNMASK_ENABLED) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD); - return; - } - - if (ioim->proc_rsp_data(ioim) == BFA_TRUE) - bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD); - else - bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP); + bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD); } /* @@ -3364,35 +2987,6 @@ bfa_ioim_free(struct bfa_ioim_s *ioim) void bfa_ioim_start(struct bfa_ioim_s *ioim) { - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct bfa_lps_s *lps; - enum bfa_ioim_lm_status status; - struct scsi_lun scsilun; - - if (bfa_get_lun_mask_status(ioim->bfa) == BFA_LUNMASK_ENABLED) { - lps = BFA_IOIM_TO_LPS(ioim); - int_to_scsilun(cmnd->device->lun, &scsilun); - status = bfa_ioim_lm_check(ioim, lps, - ioim->itnim->rport, scsilun); - if (status == BFA_IOIM_LM_LUN_NOT_RDY) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_LM_LUN_NOT_RDY); - bfa_stats(ioim->itnim, lm_lun_not_rdy); - return; - } - - if (status == BFA_IOIM_LM_LUN_NOT_SUP) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_LM_LUN_NOT_SUP); - bfa_stats(ioim->itnim, lm_lun_not_sup); - return; - } - - if (status == BFA_IOIM_LM_RPL_DATA_CHANGED) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_LM_RPL_DC); - bfa_stats(ioim->itnim, lm_rpl_data_changed); - return; - } - } - bfa_ioim_cb_profile_start(ioim->fcpim, ioim); /* diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h index 1080bcb81cb..36f26da80f7 100644 --- a/drivers/scsi/bfa/bfa_fcpim.h +++ b/drivers/scsi/bfa/bfa_fcpim.h @@ -110,7 +110,6 @@ struct bfad_ioim_s; struct bfad_tskim_s; typedef void (*bfa_fcpim_profile_t) (struct bfa_ioim_s *ioim); -typedef bfa_boolean_t (*bfa_ioim_lm_proc_rsp_data_t) (struct bfa_ioim_s *ioim); struct bfa_fcpim_s { struct bfa_s *bfa; @@ -124,7 +123,6 @@ struct bfa_fcpim_s { u32 path_tov; u16 q_depth; u8 reqq; /* Request queue to be used */ - u8 lun_masking_pending; struct list_head itnim_q; /* queue of active itnim */ struct list_head ioim_resfree_q; /* IOs waiting for f/w */ struct list_head ioim_comp_q; /* IO global comp Q */ @@ -181,7 +179,6 @@ struct bfa_ioim_s { u8 reqq; /* Request queue for I/O */ u8 mode; /* IO is passthrough or not */ u64 start_time; /* IO's Profile start val */ - bfa_ioim_lm_proc_rsp_data_t proc_rsp_data; /* RSP data adjust */ }; struct bfa_ioim_sp_s { @@ -261,10 +258,6 @@ struct bfa_itnim_s { (__ioim)->iotag |= k << BFA_IOIM_RETRY_TAG_OFFSET; \ } while (0) -#define BFA_IOIM_TO_LPS(__ioim) \ - BFA_LPS_FROM_TAG(BFA_LPS_MOD(__ioim->bfa), \ - __ioim->itnim->rport->rport_info.lp_tag) - static inline bfa_boolean_t bfa_ioim_maxretry_reached(struct bfa_ioim_s *ioim) { diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h index 95adb86d376..b52cbb6bcd5 100644 --- a/drivers/scsi/bfa/bfa_svc.h +++ b/drivers/scsi/bfa/bfa_svc.h @@ -582,11 +582,6 @@ void bfa_cb_rport_qos_scn_prio(void *rport, #define BFA_LP_TAG_INVALID 0xff void bfa_rport_set_lunmask(struct bfa_s *bfa, struct bfa_rport_s *rp); void bfa_rport_unset_lunmask(struct bfa_s *bfa, struct bfa_rport_s *rp); -bfa_boolean_t bfa_rport_lunmask_active(struct bfa_rport_s *rp); -wwn_t bfa_rport_get_pwwn(struct bfa_s *bfa, struct bfa_rport_s *rp); -struct bfa_rport_s *bfa_rport_get_by_wwn(struct bfa_s *bfa, u16 vf_id, - wwn_t *lpwwn, wwn_t rpwwn); -void *bfa_cb_get_rp_by_wwn(void *arg, u16 vf_id, wwn_t *lpwwn, wwn_t rpwwn); /* * bfa fcxp API functions diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 66fb72531b3..404fd10ddb2 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -674,6 +674,7 @@ bfad_vport_create(struct bfad_s *bfad, u16 vf_id, spin_lock_irqsave(&bfad->bfad_lock, flags); bfa_fcs_vport_start(&vport->fcs_vport); + list_add_tail(&vport->list_entry, &bfad->vport_list); spin_unlock_irqrestore(&bfad->bfad_lock, flags); return BFA_STATUS_OK; @@ -1404,6 +1405,7 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid) bfad->ref_count = 0; bfad->pport.bfad = bfad; INIT_LIST_HEAD(&bfad->pbc_vport_list); + INIT_LIST_HEAD(&bfad->vport_list); /* Setup the debugfs node for this bfad */ if (bfa_debugfs_enable) diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index 9d95844ab46..1938fe0473e 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -491,7 +491,7 @@ bfad_im_vport_delete(struct fc_vport *fc_vport) free_scsi_host: bfad_scsi_host_free(bfad, im_port); - + list_del(&vport->list_entry); kfree(vport); return 0; diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 06fc00caeb4..530de2b1200 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -2394,6 +2394,21 @@ out: return 0; } +/* Function to reset the LUN SCAN mode */ +static void +bfad_iocmd_lunmask_reset_lunscan_mode(struct bfad_s *bfad, int lunmask_cfg) +{ + struct bfad_im_port_s *pport_im = bfad->pport.im_port; + struct bfad_vport_s *vport = NULL; + + /* Set the scsi device LUN SCAN flags for base port */ + bfad_reset_sdev_bflags(pport_im, lunmask_cfg); + + /* Set the scsi device LUN SCAN flags for the vports */ + list_for_each_entry(vport, &bfad->vport_list, list_entry) + bfad_reset_sdev_bflags(vport->drv_port.im_port, lunmask_cfg); +} + int bfad_iocmd_lunmask(struct bfad_s *bfad, void *pcmd, unsigned int v_cmd) { @@ -2401,11 +2416,17 @@ bfad_iocmd_lunmask(struct bfad_s *bfad, void *pcmd, unsigned int v_cmd) unsigned long flags; spin_lock_irqsave(&bfad->bfad_lock, flags); - if (v_cmd == IOCMD_FCPIM_LUNMASK_ENABLE) + if (v_cmd == IOCMD_FCPIM_LUNMASK_ENABLE) { iocmd->status = bfa_fcpim_lunmask_update(&bfad->bfa, BFA_TRUE); - else if (v_cmd == IOCMD_FCPIM_LUNMASK_DISABLE) + /* Set the LUN Scanning mode to be Sequential scan */ + if (iocmd->status == BFA_STATUS_OK) + bfad_iocmd_lunmask_reset_lunscan_mode(bfad, BFA_TRUE); + } else if (v_cmd == IOCMD_FCPIM_LUNMASK_DISABLE) { iocmd->status = bfa_fcpim_lunmask_update(&bfad->bfa, BFA_FALSE); - else if (v_cmd == IOCMD_FCPIM_LUNMASK_CLEAR) + /* Set the LUN Scanning mode to default REPORT_LUNS scan */ + if (iocmd->status == BFA_STATUS_OK) + bfad_iocmd_lunmask_reset_lunscan_mode(bfad, BFA_FALSE); + } else if (v_cmd == IOCMD_FCPIM_LUNMASK_CLEAR) iocmd->status = bfa_fcpim_lunmask_clear(&bfad->bfa); spin_unlock_irqrestore(&bfad->bfad_lock, flags); return 0; diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index 5e19a5f820e..dc5b9d99c45 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -43,6 +43,7 @@ #include <scsi/scsi_transport_fc.h> #include <scsi/scsi_transport.h> #include <scsi/scsi_bsg_fc.h> +#include <scsi/scsi_devinfo.h> #include "bfa_modules.h" #include "bfa_fcs.h" @@ -227,6 +228,7 @@ struct bfad_s { struct list_head active_aen_q; struct bfa_aen_entry_s aen_list[BFA_AEN_MAX_ENTRY]; spinlock_t bfad_aen_spinlock; + struct list_head vport_list; }; /* BFAD state machine events */ diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index e5db649e8eb..3153923f5b6 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -918,16 +918,70 @@ bfad_get_itnim(struct bfad_im_port_s *im_port, int id) } /* + * Function is invoked from the SCSI Host Template slave_alloc() entry point. + * Has the logic to query the LUN Mask database to check if this LUN needs to + * be made visible to the SCSI mid-layer or not. + * + * Returns BFA_STATUS_OK if this LUN needs to be added to the OS stack. + * Returns -ENXIO to notify SCSI mid-layer to not add this LUN to the OS stack. + */ +static int +bfad_im_check_if_make_lun_visible(struct scsi_device *sdev, + struct fc_rport *rport) +{ + struct bfad_itnim_data_s *itnim_data = + (struct bfad_itnim_data_s *) rport->dd_data; + struct bfa_s *bfa = itnim_data->itnim->bfa_itnim->bfa; + struct bfa_rport_s *bfa_rport = itnim_data->itnim->bfa_itnim->rport; + struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(bfa); + int i = 0, ret = -ENXIO; + + for (i = 0; i < MAX_LUN_MASK_CFG; i++) { + if (lun_list[i].state == BFA_IOIM_LUN_MASK_ACTIVE && + scsilun_to_int(&lun_list[i].lun) == sdev->lun && + lun_list[i].rp_tag == bfa_rport->rport_tag && + lun_list[i].lp_tag == (u8)bfa_rport->rport_info.lp_tag) { + ret = BFA_STATUS_OK; + break; + } + } + return ret; +} + +/* * Scsi_Host template entry slave_alloc */ static int bfad_im_slave_alloc(struct scsi_device *sdev) { struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + struct bfad_itnim_data_s *itnim_data = + (struct bfad_itnim_data_s *) rport->dd_data; + struct bfa_s *bfa = itnim_data->itnim->bfa_itnim->bfa; if (!rport || fc_remote_port_chkready(rport)) return -ENXIO; + if (bfa_get_lun_mask_status(bfa) == BFA_LUNMASK_ENABLED) { + /* + * We should not mask LUN 0 - since this will translate + * to no LUN / TARGET for SCSI ml resulting no scan. + */ + if (sdev->lun == 0) { + sdev->sdev_bflags |= BLIST_NOREPORTLUN | + BLIST_SPARSELUN; + goto done; + } + + /* + * Query LUN Mask configuration - to expose this LUN + * to the SCSI mid-layer or to mask it. + */ + if (bfad_im_check_if_make_lun_visible(sdev, rport) != + BFA_STATUS_OK) + return -ENXIO; + } +done: sdev->hostdata = rport->dd_data; return 0; @@ -1037,6 +1091,8 @@ bfad_im_fc_rport_add(struct bfad_im_port_s *im_port, struct bfad_itnim_s *itnim) && (fc_rport->scsi_target_id < MAX_FCP_TARGET)) itnim->scsi_tgt_id = fc_rport->scsi_target_id; + itnim->channel = fc_rport->channel; + return; } diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h index 004b6cf848d..0814367ef10 100644 --- a/drivers/scsi/bfa/bfad_im.h +++ b/drivers/scsi/bfa/bfad_im.h @@ -91,6 +91,7 @@ struct bfad_itnim_s { struct fc_rport *fc_rport; struct bfa_itnim_s *bfa_itnim; u16 scsi_tgt_id; + u16 channel; u16 queue_work; unsigned long last_ramp_up_time; unsigned long last_queue_full_time; @@ -166,4 +167,30 @@ irqreturn_t bfad_intx(int irq, void *dev_id); int bfad_im_bsg_request(struct fc_bsg_job *job); int bfad_im_bsg_timeout(struct fc_bsg_job *job); +/* + * Macro to set the SCSI device sdev_bflags - sdev_bflags are used by the + * SCSI mid-layer to choose LUN Scanning mode REPORT_LUNS vs. Sequential Scan + * + * Internally iterate's over all the ITNIM's part of the im_port & set's the + * sdev_bflags for the scsi_device associated with LUN #0. + */ +#define bfad_reset_sdev_bflags(__im_port, __lunmask_cfg) do { \ + struct scsi_device *__sdev = NULL; \ + struct bfad_itnim_s *__itnim = NULL; \ + u32 scan_flags = BLIST_NOREPORTLUN | BLIST_SPARSELUN; \ + list_for_each_entry(__itnim, &((__im_port)->itnim_mapped_list), \ + list_entry) { \ + __sdev = scsi_device_lookup((__im_port)->shost, \ + __itnim->channel, \ + __itnim->scsi_tgt_id, 0); \ + if (__sdev) { \ + if ((__lunmask_cfg) == BFA_TRUE) \ + __sdev->sdev_bflags |= scan_flags; \ + else \ + __sdev->sdev_bflags &= ~scan_flags; \ + scsi_device_put(__sdev); \ + } \ + } \ +} while (0) + #endif diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index c5360ffb4be..d3ff9cd4023 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -1868,8 +1868,9 @@ int cxgbi_conn_alloc_pdu(struct iscsi_task *task, u8 opcode) tdata->skb = alloc_skb(cdev->skb_tx_rsvd + headroom, GFP_ATOMIC); if (!tdata->skb) { - pr_warn("alloc skb %u+%u, opcode 0x%x failed.\n", - cdev->skb_tx_rsvd, headroom, opcode); + struct cxgbi_sock *csk = cconn->cep->csk; + struct net_device *ndev = cdev->ports[csk->port_id]; + ndev->stats.tx_dropped++; return -ENOMEM; } diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 4ef021291a4..04c5cea47a2 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -466,6 +466,11 @@ static int alua_check_sense(struct scsi_device *sdev, * Power On, Reset, or Bus Device Reset, just retry. */ return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01) + /* + * Mode Parameters Changed + */ + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) /* * ALUA state changed diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 841ebf4a678..53a31c753cb 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -953,6 +953,8 @@ static int __init rdac_init(void) if (!kmpath_rdacd) { scsi_unregister_device_handler(&rdac_dh); printk(KERN_ERR "kmpath_rdacd creation failed.\n"); + + r = -EINVAL; } done: return r; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 8d67467dd9c..e9599600aa2 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -58,7 +58,11 @@ module_param_named(ddp_min, fcoe_ddp_min, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ddp_min, "Minimum I/O size in bytes for " \ "Direct Data Placement (DDP)."); -DEFINE_MUTEX(fcoe_config_mutex); +unsigned int fcoe_debug_logging; +module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels"); + +static DEFINE_MUTEX(fcoe_config_mutex); static struct workqueue_struct *fcoe_wq; @@ -67,8 +71,8 @@ static DECLARE_COMPLETION(fcoe_flush_completion); /* fcoe host list */ /* must only by accessed under the RTNL mutex */ -LIST_HEAD(fcoe_hostlist); -DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); +static LIST_HEAD(fcoe_hostlist); +static DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); /* Function Prototypes */ static int fcoe_reset(struct Scsi_Host *); @@ -157,7 +161,7 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = { .lport_set_port_id = fcoe_set_port_id, }; -struct fc_function_template fcoe_nport_fc_functions = { +static struct fc_function_template fcoe_nport_fc_functions = { .show_host_node_name = 1, .show_host_port_name = 1, .show_host_supported_classes = 1, @@ -197,7 +201,7 @@ struct fc_function_template fcoe_nport_fc_functions = { .bsg_request = fc_lport_bsg_request, }; -struct fc_function_template fcoe_vport_fc_functions = { +static struct fc_function_template fcoe_vport_fc_functions = { .show_host_node_name = 1, .show_host_port_name = 1, .show_host_supported_classes = 1, @@ -433,7 +437,7 @@ static inline void fcoe_interface_put(struct fcoe_interface *fcoe) * * Caller must be holding the RTNL mutex */ -void fcoe_interface_cleanup(struct fcoe_interface *fcoe) +static void fcoe_interface_cleanup(struct fcoe_interface *fcoe) { struct net_device *netdev = fcoe->netdev; struct fcoe_ctlr *fip = &fcoe->ctlr; @@ -748,7 +752,7 @@ static int fcoe_shost_config(struct fc_lport *lport, struct device *dev) * * Returns: True for read types I/O, otherwise returns false. */ -bool fcoe_oem_match(struct fc_frame *fp) +static bool fcoe_oem_match(struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fcp_cmnd *fcp; @@ -756,11 +760,12 @@ bool fcoe_oem_match(struct fc_frame *fp) if (fc_fcp_is_read(fr_fsp(fp)) && (fr_fsp(fp)->data_len > fcoe_ddp_min)) return true; - else if (!(ntoh24(fh->fh_f_ctl) & FC_FC_EX_CTX)) { + else if ((fr_fsp(fp) == NULL) && + (fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) && + (ntohs(fh->fh_rx_id) == FC_XID_UNKNOWN)) { fcp = fc_frame_payload_get(fp, sizeof(*fcp)); - if (ntohs(fh->fh_rx_id) == FC_XID_UNKNOWN && - fcp && (ntohl(fcp->fc_dl) > fcoe_ddp_min) && - (fcp->fc_flags & FCP_CFL_WRDATA)) + if ((fcp->fc_flags & FCP_CFL_WRDATA) && + (ntohl(fcp->fc_dl) > fcoe_ddp_min)) return true; } return false; @@ -1106,7 +1111,7 @@ static int __init fcoe_if_init(void) * * Returns: 0 on success */ -int __exit fcoe_if_exit(void) +static int __exit fcoe_if_exit(void) { fc_release_transport(fcoe_nport_scsi_transport); fc_release_transport(fcoe_vport_scsi_transport); @@ -1295,7 +1300,7 @@ static inline unsigned int fcoe_select_cpu(void) * * Returns: 0 for success */ -int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, +static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, struct packet_type *ptype, struct net_device *olddev) { struct fc_lport *lport; @@ -1451,7 +1456,7 @@ static int fcoe_alloc_paged_crc_eof(struct sk_buff *skb, int tlen) * * Return: 0 for success */ -int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) +static int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) { int wlen; u32 crc; @@ -1671,8 +1676,7 @@ static void fcoe_recv_frame(struct sk_buff *skb) skb->dev ? skb->dev->name : "<NULL>"); port = lport_priv(lport); - if (skb_is_nonlinear(skb)) - skb_linearize(skb); /* not ideal */ + skb_linearize(skb); /* check for skb_is_nonlinear is within skb_linearize */ /* * Frame length checks and setting up the header pointers @@ -1728,7 +1732,7 @@ drop: * * Return: 0 for success */ -int fcoe_percpu_receive_thread(void *arg) +static int fcoe_percpu_receive_thread(void *arg) { struct fcoe_percpu_s *p = arg; struct sk_buff *skb; @@ -2146,7 +2150,7 @@ out_nortnl: * Returns: 0 if the ethtool query was successful * -1 if the ethtool query failed */ -int fcoe_link_speed_update(struct fc_lport *lport) +static int fcoe_link_speed_update(struct fc_lport *lport) { struct net_device *netdev = fcoe_netdev(lport); struct ethtool_cmd ecmd; @@ -2180,7 +2184,7 @@ int fcoe_link_speed_update(struct fc_lport *lport) * Returns: 0 if link is UP and OK, -1 if not * */ -int fcoe_link_ok(struct fc_lport *lport) +static int fcoe_link_ok(struct fc_lport *lport) { struct net_device *netdev = fcoe_netdev(lport); @@ -2200,7 +2204,7 @@ int fcoe_link_ok(struct fc_lport *lport) * there no packets that will be handled by the lport, but also that any * threads already handling packet have returned. */ -void fcoe_percpu_clean(struct fc_lport *lport) +static void fcoe_percpu_clean(struct fc_lport *lport) { struct fcoe_percpu_s *pp; struct fcoe_rcv_info *fr; @@ -2251,7 +2255,7 @@ void fcoe_percpu_clean(struct fc_lport *lport) * * Returns: Always 0 (return value required by FC transport template) */ -int fcoe_reset(struct Scsi_Host *shost) +static int fcoe_reset(struct Scsi_Host *shost) { struct fc_lport *lport = shost_priv(shost); struct fcoe_port *port = lport_priv(lport); diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h index 6c6884bcf84..bcc89e63949 100644 --- a/drivers/scsi/fcoe/fcoe.h +++ b/drivers/scsi/fcoe/fcoe.h @@ -40,9 +40,7 @@ #define FCOE_MIN_XID 0x0000 /* the min xid supported by fcoe_sw */ #define FCOE_MAX_XID 0x0FFF /* the max xid supported by fcoe_sw */ -unsigned int fcoe_debug_logging; -module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels"); +extern unsigned int fcoe_debug_logging; #define FCOE_LOGGING 0x01 /* General logging, not categorized */ #define FCOE_NETDEV_LOGGING 0x02 /* Netdevice logging */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 5140f5d0fd6..b96962c3944 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -4271,7 +4271,9 @@ static void stop_controller_lockup_detector(struct ctlr_info *h) remove_ctlr_from_lockup_detector_list(h); /* If the list of ctlr's to monitor is empty, stop the thread */ if (list_empty(&hpsa_ctlr_list)) { + spin_unlock_irqrestore(&lockup_detector_lock, flags); kthread_stop(hpsa_lockup_detector); + spin_lock_irqsave(&lockup_detector_lock, flags); hpsa_lockup_detector = NULL; } spin_unlock_irqrestore(&lockup_detector_lock, flags); diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile deleted file mode 100644 index 5f54461cabc..00000000000 --- a/drivers/scsi/isci/firmware/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# Makefile for create_fw -# -CC=gcc -CFLAGS=-c -Wall -O2 -g -LDFLAGS= -SOURCES=create_fw.c -OBJECTS=$(SOURCES:.cpp=.o) -EXECUTABLE=create_fw - -all: $(SOURCES) $(EXECUTABLE) - -$(EXECUTABLE): $(OBJECTS) - $(CC) $(LDFLAGS) $(OBJECTS) -o $@ - -.c.o: - $(CC) $(CFLAGS) $< -O $@ - -clean: - rm -f *.o $(EXECUTABLE) diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README deleted file mode 100644 index 8056d2bd233..00000000000 --- a/drivers/scsi/isci/firmware/README +++ /dev/null @@ -1,36 +0,0 @@ -This defines the temporary binary blow we are to pass to the SCU -driver to emulate the binary firmware that we will eventually be -able to access via NVRAM on the SCU controller. - -The current size of the binary blob is expected to be 149 bytes or larger - -Header Types: -0x1: Phy Masks -0x2: Phy Gens -0x3: SAS Addrs -0xff: End of Data - -ID string - u8[12]: "#SCU MAGIC#\0" -Version - u8: 1 -SubVersion - u8: 0 - -Header Type - u8: 0x1 -Size - u8: 8 -Phy Mask - u32[8] - -Header Type - u8: 0x2 -Size - u8: 8 -Phy Gen - u32[8] - -Header Type - u8: 0x3 -Size - u8: 8 -Sas Addr - u64[8] - -Header Type - u8: 0xf - - -============================================================================== - -Place isci_firmware.bin in /lib/firmware -Be sure to recreate the initramfs image to include the firmware. - diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c deleted file mode 100644 index c7a2887a7e9..00000000000 --- a/drivers/scsi/isci/firmware/create_fw.c +++ /dev/null @@ -1,99 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <string.h> -#include <errno.h> -#include <asm/types.h> -#include <strings.h> -#include <stdint.h> - -#include "create_fw.h" -#include "../probe_roms.h" - -int write_blob(struct isci_orom *isci_orom) -{ - FILE *fd; - int err; - size_t count; - - fd = fopen(blob_name, "w+"); - if (!fd) { - perror("Open file for write failed"); - fclose(fd); - return -EIO; - } - - count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd); - if (count != 1) { - perror("Write data failed"); - fclose(fd); - return -EIO; - } - - fclose(fd); - - return 0; -} - -void set_binary_values(struct isci_orom *isci_orom) -{ - int ctrl_idx, phy_idx, port_idx; - - /* setting OROM signature */ - strncpy(isci_orom->hdr.signature, sig, strlen(sig)); - isci_orom->hdr.version = version; - isci_orom->hdr.total_block_length = sizeof(struct isci_orom); - isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr); - isci_orom->hdr.num_elements = num_elements; - - for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) { - isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type; - isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up = - max_num_concurrent_dev_spin_up; - isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc = - enable_ssc; - - for (port_idx = 0; port_idx < 4; port_idx++) - isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask = - phy_mask[ctrl_idx][port_idx]; - - for (phy_idx = 0; phy_idx < 4; phy_idx++) { - isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high = - (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32); - isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low = - (__u32)(sas_addr[ctrl_idx][phy_idx]); - - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 = - afe_tx_amp_control0; - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 = - afe_tx_amp_control1; - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 = - afe_tx_amp_control2; - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 = - afe_tx_amp_control3; - } - } -} - -int main(void) -{ - int err; - struct isci_orom *isci_orom; - - isci_orom = malloc(sizeof(struct isci_orom)); - memset(isci_orom, 0, sizeof(struct isci_orom)); - - set_binary_values(isci_orom); - - err = write_blob(isci_orom); - if (err < 0) { - free(isci_orom); - return err; - } - - free(isci_orom); - return 0; -} diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h deleted file mode 100644 index 5f298828d22..00000000000 --- a/drivers/scsi/isci/firmware/create_fw.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _CREATE_FW_H_ -#define _CREATE_FW_H_ -#include "../probe_roms.h" - - -/* we are configuring for 2 SCUs */ -static const int num_elements = 2; - -/* - * For all defined arrays: - * elements 0-3 are for SCU0, ports 0-3 - * elements 4-7 are for SCU1, ports 0-3 - * - * valid configurations for one SCU are: - * P0 P1 P2 P3 - * ---------------- - * 0xF,0x0,0x0,0x0 # 1 x4 port - * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 - * # ports - * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 - * # port - * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port - * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) - * - * if there is a port/phy on which you do not wish to override the default - * values, use the value assigned to UNINIT_PARAM (255). - */ - -/* discovery mode type (port auto config mode by default ) */ - -/* - * if there is a port/phy on which you do not wish to override the default - * values, use the value "0000000000000000". SAS address of zero's is - * considered invalid and will not be used. - */ -#ifdef MPC -static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; -static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, - {1, 2, 4, 8} }; -static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL, - 0x5FCFFFFFF0000002ULL, - 0x5FCFFFFFF0000003ULL, - 0x5FCFFFFFF0000004ULL }, - { 0x5FCFFFFFF0000005ULL, - 0x5FCFFFFFF0000006ULL, - 0x5FCFFFFFF0000007ULL, - 0x5FCFFFFFF0000008ULL } }; -#else /* APC (default) */ -static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; -static const __u8 phy_mask[2][4]; -static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL, - 0x5FCFFFFF00000001ULL, - 0x5FCFFFFF00000001ULL, - 0x5FCFFFFF00000001ULL }, - { 0x5FCFFFFF00000002ULL, - 0x5FCFFFFF00000002ULL, - 0x5FCFFFFF00000002ULL, - 0x5FCFFFFF00000002ULL } }; -#endif - -/* Maximum number of concurrent device spin up */ -static const int max_num_concurrent_dev_spin_up = 1; - -/* enable of ssc operation */ -static const int enable_ssc; - -/* AFE_TX_AMP_CONTROL */ -static const unsigned int afe_tx_amp_control0 = 0x000bdd08; -static const unsigned int afe_tx_amp_control1 = 0x000ffc00; -static const unsigned int afe_tx_amp_control2 = 0x000b7c09; -static const unsigned int afe_tx_amp_control3 = 0x000afc6e; - -static const char blob_name[] = "isci_firmware.bin"; -static const char sig[] = "ISCUOEMB"; -static const unsigned char version = 0x10; - -#endif diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index e7fe9c4c85b..1a65d651423 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -899,7 +899,8 @@ static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost) */ if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) || (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) || - (iphy->is_in_link_training == true && is_phy_starting(iphy))) { + (iphy->is_in_link_training == true && is_phy_starting(iphy)) || + (ihost->port_agent.phy_ready_mask != ihost->port_agent.phy_configured_mask)) { is_controller_start_complete = false; break; } @@ -1666,6 +1667,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost /* Default to no SSC operation. */ ihost->oem_parameters.controller.do_enable_ssc = false; + /* Default to short cables on all phys. */ + ihost->oem_parameters.controller.cable_selection_mask = 0; + /* Initialize all of the port parameter information to narrow ports. */ for (index = 0; index < SCI_MAX_PORTS; index++) { ihost->oem_parameters.ports[index].phy_mask = 0; @@ -1673,8 +1677,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost /* Initialize all of the phy parameter information. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - /* Default to 6G (i.e. Gen 3) for now. */ - ihost->user_parameters.phys[index].max_speed_generation = 3; + /* Default to 3G (i.e. Gen 2). */ + ihost->user_parameters.phys[index].max_speed_generation = + SCIC_SDS_PARM_GEN2_SPEED; /* the frequencies cannot be 0 */ ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f; @@ -1694,7 +1699,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost ihost->user_parameters.ssp_inactivity_timeout = 5; ihost->user_parameters.stp_max_occupancy_timeout = 5; ihost->user_parameters.ssp_max_occupancy_timeout = 20; - ihost->user_parameters.no_outbound_task_timeout = 20; + ihost->user_parameters.no_outbound_task_timeout = 2; } static void controller_timeout(unsigned long data) @@ -1759,7 +1764,7 @@ static enum sci_status sci_controller_construct(struct isci_host *ihost, return sci_controller_reset(ihost); } -int sci_oem_parameters_validate(struct sci_oem_params *oem) +int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version) { int i; @@ -1791,18 +1796,61 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem) oem->controller.max_concurr_spin_up < 1) return -EINVAL; + if (oem->controller.do_enable_ssc) { + if (version < ISCI_ROM_VER_1_1 && oem->controller.do_enable_ssc != 1) + return -EINVAL; + + if (version >= ISCI_ROM_VER_1_1) { + u8 test = oem->controller.ssc_sata_tx_spread_level; + + switch (test) { + case 0: + case 2: + case 3: + case 6: + case 7: + break; + default: + return -EINVAL; + } + + test = oem->controller.ssc_sas_tx_spread_level; + if (oem->controller.ssc_sas_tx_type == 0) { + switch (test) { + case 0: + case 2: + case 3: + break; + default: + return -EINVAL; + } + } else if (oem->controller.ssc_sas_tx_type == 1) { + switch (test) { + case 0: + case 3: + case 6: + break; + default: + return -EINVAL; + } + } + } + } + return 0; } static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) { u32 state = ihost->sm.current_state_id; + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); if (state == SCIC_RESET || state == SCIC_INITIALIZING || state == SCIC_INITIALIZED) { - if (sci_oem_parameters_validate(&ihost->oem_parameters)) + if (sci_oem_parameters_validate(&ihost->oem_parameters, + pci_info->orom->hdr.version)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; return SCI_SUCCESS; @@ -1857,6 +1905,31 @@ static void power_control_timeout(unsigned long data) ihost->power_control.phys_waiting--; ihost->power_control.phys_granted_power++; sci_phy_consume_power_handler(iphy); + + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + u8 j; + + for (j = 0; j < SCI_MAX_PHYS; j++) { + struct isci_phy *requester = ihost->power_control.requesters[j]; + + /* + * Search the power_control queue to see if there are other phys + * attached to the same remote device. If found, take all of + * them out of await_sas_power state. + */ + if (requester != NULL && requester != iphy) { + u8 other = memcmp(requester->frame_rcvd.iaf.sas_addr, + iphy->frame_rcvd.iaf.sas_addr, + sizeof(requester->frame_rcvd.iaf.sas_addr)); + + if (other == 0) { + ihost->power_control.requesters[j] = NULL; + ihost->power_control.phys_waiting--; + sci_phy_consume_power_handler(requester); + } + } + } + } } /* @@ -1891,9 +1964,34 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost, ihost->power_control.timer_started = true; } else { - /* Add the phy in the waiting list */ - ihost->power_control.requesters[iphy->phy_index] = iphy; - ihost->power_control.phys_waiting++; + /* + * There are phys, attached to the same sas address as this phy, are + * already in READY state, this phy don't need wait. + */ + u8 i; + struct isci_phy *current_phy; + + for (i = 0; i < SCI_MAX_PHYS; i++) { + u8 other; + current_phy = &ihost->phys[i]; + + other = memcmp(current_phy->frame_rcvd.iaf.sas_addr, + iphy->frame_rcvd.iaf.sas_addr, + sizeof(current_phy->frame_rcvd.iaf.sas_addr)); + + if (current_phy->sm.current_state_id == SCI_PHY_READY && + current_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS && + other == 0) { + sci_phy_consume_power_handler(iphy); + break; + } + } + + if (i == SCI_MAX_PHYS) { + /* Add the phy in the waiting list */ + ihost->power_control.requesters[iphy->phy_index] = iphy; + ihost->power_control.phys_waiting++; + } } } @@ -1908,162 +2006,250 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost, ihost->power_control.requesters[iphy->phy_index] = NULL; } +static int is_long_cable(int phy, unsigned char selection_byte) +{ + return !!(selection_byte & (1 << phy)); +} + +static int is_medium_cable(int phy, unsigned char selection_byte) +{ + return !!(selection_byte & (1 << (phy + 4))); +} + +static enum cable_selections decode_selection_byte( + int phy, + unsigned char selection_byte) +{ + return ((selection_byte & (1 << phy)) ? 1 : 0) + + (selection_byte & (1 << (phy + 4)) ? 2 : 0); +} + +static unsigned char *to_cable_select(struct isci_host *ihost) +{ + if (is_cable_select_overridden()) + return ((unsigned char *)&cable_selection_override) + + ihost->id; + else + return &ihost->oem_parameters.controller.cable_selection_mask; +} + +enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy) +{ + return decode_selection_byte(phy, *to_cable_select(ihost)); +} + +char *lookup_cable_names(enum cable_selections selection) +{ + static char *cable_names[] = { + [short_cable] = "short", + [long_cable] = "long", + [medium_cable] = "medium", + [undefined_cable] = "<undefined, assumed long>" /* bit 0==1 */ + }; + return (selection <= undefined_cable) ? cable_names[selection] + : cable_names[undefined_cable]; +} + #define AFE_REGISTER_WRITE_DELAY 10 -/* Initialize the AFE for this phy index. We need to read the AFE setup from - * the OEM parameters - */ static void sci_controller_afe_initialization(struct isci_host *ihost) { + struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe; const struct sci_oem_params *oem = &ihost->oem_parameters; struct pci_dev *pdev = ihost->pdev; u32 afe_status; u32 phy_id; + unsigned char cable_selection_mask = *to_cable_select(ihost); /* Clear DFX Status registers */ - writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); + writel(0x0081000f, &afe->afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); - if (is_b0(pdev)) { + if (is_b0(pdev) || is_c0(pdev) || is_c1(pdev)) { /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement - * Timer, PM Stagger Timer */ - writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); + * Timer, PM Stagger Timer + */ + writel(0x0007FFFF, &afe->afe_pmsn_master_control2); udelay(AFE_REGISTER_WRITE_DELAY); } /* Configure bias currents to normal */ if (is_a2(pdev)) - writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); + writel(0x00005A00, &afe->afe_bias_control); else if (is_b0(pdev) || is_c0(pdev)) - writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); + writel(0x00005F00, &afe->afe_bias_control); + else if (is_c1(pdev)) + writel(0x00005500, &afe->afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ - if (is_b0(pdev) || is_c0(pdev)) - writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); - else - writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); + if (is_a2(pdev)) + writel(0x80040908, &afe->afe_pll_control0); + else if (is_b0(pdev) || is_c0(pdev)) + writel(0x80040A08, &afe->afe_pll_control0); + else if (is_c1(pdev)) { + writel(0x80000B08, &afe->afe_pll_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + writel(0x00000B08, &afe->afe_pll_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + writel(0x80000B08, &afe->afe_pll_control0); + } udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { - afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status); + afe_status = readl(&afe->afe_common_block_status); udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_a2(pdev)) { - /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); + /* Shorten SAS SNW lock time (RxLock timer value from 76 + * us to 50 us) + */ + writel(0x7bcc96ad, &afe->afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_id]; const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + int cable_length_long = + is_long_cable(phy_id, cable_selection_mask); + int cable_length_medium = + is_medium_cable(phy_id, cable_selection_mask); - if (is_b0(pdev)) { - /* Configure transmitter SSC parameters */ - writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + if (is_a2(pdev)) { + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x00004512, &xcvr->afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x0050100F, &xcvr->afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + } else if (is_b0(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x00030000, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); } else if (is_c0(pdev)) { - /* Configure transmitter SSC parameters */ - writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + /* Configure transmitter SSC parameters */ + writel(0x00010202, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x00014500, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); - } else { - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + } else if (is_c1(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x00010202, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x0001C500, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); } - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ + /* Power up TX and RX out from power down (PWRDNTX and + * PWRDNRX) & increase TX int & ext bias 20%....(0xe85c) + */ if (is_a2(pdev)) - writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003F0, &xcvr->afe_channel_control); else if (is_b0(pdev)) { - /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D7, &xcvr->afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - } else { - writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D4, &xcvr->afe_channel_control); + } else if (is_c0(pdev)) { + writel(0x000001E7, &xcvr->afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E4, &xcvr->afe_channel_control); + } else if (is_c1(pdev)) { + writel(cable_length_long ? 0x000002F7 : 0x000001F7, + &xcvr->afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(cable_length_long ? 0x000002F4 : 0x000001F4, + &xcvr->afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); if (is_a2(pdev)) { /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); } - /* - * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), - * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + if (is_a2(pdev) || is_b0(pdev)) + /* RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, + * TPD=0x0(TX Power On), RDD=0x0(RX Detect + * Enabled) ....(0xe800) + */ + writel(0x00004100, &xcvr->afe_xcvr_control0); + else if (is_c0(pdev)) + writel(0x00014100, &xcvr->afe_xcvr_control0); + else if (is_c1(pdev)) + writel(0x0001C100, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a2(pdev)) - writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &xcvr->afe_rx_ssc_control0); else if (is_b0(pdev)) { - writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &xcvr->afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); - } else { - writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + writel(0x00040000, &xcvr->afe_tx_control); + } else if (is_c0(pdev)) { + writel(0x01400C0F, &xcvr->afe_rx_ssc_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x3F6F103F, &xcvr->afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &xcvr->afe_tx_control); + } else if (is_c1(pdev)) { + writel(cable_length_long ? 0x01500C0C : + cable_length_medium ? 0x01400C0D : 0x02400C0D, + &xcvr->afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x000003E0, &xcvr->afe_dfx_rx_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(cable_length_long ? 0x33091C1F : + cable_length_medium ? 0x3315181F : 0x2B17161F, + &xcvr->afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); } udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control0, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + writel(oem_phy->afe_tx_amp_control0, &xcvr->afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control1, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + writel(oem_phy->afe_tx_amp_control1, &xcvr->afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control2, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + writel(oem_phy->afe_tx_amp_control2, &xcvr->afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control3, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + writel(oem_phy->afe_tx_amp_control3, &xcvr->afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ - writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0); + writel(0x00010f00, &afe->afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 646051afd3c..5477f0fa823 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -435,11 +435,36 @@ static inline bool is_b0(struct pci_dev *pdev) static inline bool is_c0(struct pci_dev *pdev) { - if (pdev->revision >= 5) + if (pdev->revision == 5) return true; return false; } +static inline bool is_c1(struct pci_dev *pdev) +{ + if (pdev->revision >= 6) + return true; + return false; +} + +enum cable_selections { + short_cable = 0, + long_cable = 1, + medium_cable = 2, + undefined_cable = 3 +}; + +#define CABLE_OVERRIDE_DISABLED (0x10000) + +static inline int is_cable_select_overridden(void) +{ + return cable_selection_override < CABLE_OVERRIDE_DISABLED; +} + +enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy); +void validate_cable_selections(struct isci_host *ihost); +char *lookup_cable_names(enum cable_selections); + /* set hw control for 'activity', even though active enclosures seem to drive * the activity led on their own. Skip setting FSENG control on 'status' due * to unexpected operation and 'error' due to not being a supported automatic diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index a97edabcb85..17c4c2c89c2 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -65,7 +65,7 @@ #include "probe_roms.h" #define MAJ 1 -#define MIN 0 +#define MIN 1 #define BUILD 0 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ __stringify(BUILD) @@ -94,7 +94,7 @@ MODULE_DEVICE_TABLE(pci, isci_id_table); /* linux isci specific settings */ -unsigned char no_outbound_task_to = 20; +unsigned char no_outbound_task_to = 2; module_param(no_outbound_task_to, byte, 0); MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); @@ -114,7 +114,7 @@ u16 stp_inactive_to = 5; module_param(stp_inactive_to, ushort, 0); MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); -unsigned char phy_gen = 3; +unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED; module_param(phy_gen, byte, 0); MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); @@ -122,6 +122,14 @@ unsigned char max_concurr_spinup; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); +uint cable_selection_override = CABLE_OVERRIDE_DISABLED; +module_param(cable_selection_override, uint, 0); + +MODULE_PARM_DESC(cable_selection_override, + "This field indicates length of the SAS/SATA cable between " + "host and device. If any bits > 15 are set (default) " + "indicates \"use platform defaults\""); + static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); @@ -412,6 +420,14 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) return NULL; isci_host->shost = shost; + dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: " + "{%s, %s, %s, %s}\n", + (is_cable_select_overridden() ? "* " : ""), isci_host->id, + lookup_cable_names(decode_cable_selection(isci_host, 3)), + lookup_cable_names(decode_cable_selection(isci_host, 2)), + lookup_cable_names(decode_cable_selection(isci_host, 1)), + lookup_cable_names(decode_cable_selection(isci_host, 0))); + err = isci_host_init(isci_host); if (err) goto err_shost; @@ -466,7 +482,8 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic orom = isci_request_oprom(pdev); for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { - if (sci_oem_parameters_validate(&orom->ctrl[i])) { + if (sci_oem_parameters_validate(&orom->ctrl[i], + orom->hdr.version)) { dev_warn(&pdev->dev, "[%d]: invalid oem parameters detected, falling back to firmware\n", i); devm_kfree(&pdev->dev, orom); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 8efeb6b0832..234ab46fce3 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -480,6 +480,7 @@ extern u16 ssp_inactive_to; extern u16 stp_inactive_to; extern unsigned char phy_gen; extern unsigned char max_concurr_spinup; +extern uint cable_selection_override; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 35f50c2183e..fe18acfd6eb 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -91,22 +91,23 @@ sci_phy_transport_layer_initialization(struct isci_phy *iphy, static enum sci_status sci_phy_link_layer_initialization(struct isci_phy *iphy, - struct scu_link_layer_registers __iomem *reg) + struct scu_link_layer_registers __iomem *llr) { struct isci_host *ihost = iphy->owning_port->owning_controller; + struct sci_phy_user_params *phy_user; + struct sci_phy_oem_params *phy_oem; int phy_idx = iphy->phy_index; - struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = - &ihost->oem_parameters.phys[phy_idx]; - u32 phy_configuration; struct sci_phy_cap phy_cap; + u32 phy_configuration; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; u32 sp_timeouts = 0; - iphy->link_layer_registers = reg; + phy_user = &ihost->user_parameters.phys[phy_idx]; + phy_oem = &ihost->oem_parameters.phys[phy_idx]; + iphy->link_layer_registers = llr; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 @@ -116,32 +117,26 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), - &iphy->link_layer_registers->transmit_identification); + &llr->transmit_identification); /* Write the device SAS Address */ - writel(0xFEDCBA98, - &iphy->link_layer_registers->sas_device_name_high); - writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low); + writel(0xFEDCBA98, &llr->sas_device_name_high); + writel(phy_idx, &llr->sas_device_name_low); /* Write the source SAS Address */ - writel(phy_oem->sas_address.high, - &iphy->link_layer_registers->source_sas_address_high); - writel(phy_oem->sas_address.low, - &iphy->link_layer_registers->source_sas_address_low); + writel(phy_oem->sas_address.high, &llr->source_sas_address_high); + writel(phy_oem->sas_address.low, &llr->source_sas_address_low); /* Clear and Set the PHY Identifier */ - writel(0, &iphy->link_layer_registers->identify_frame_phy_id); - writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), - &iphy->link_layer_registers->identify_frame_phy_id); + writel(0, &llr->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &llr->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ - phy_configuration = - readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration = readl(&llr->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration, - &iphy->link_layer_registers->phy_configuration); + writel(phy_configuration, &llr->phy_configuration); /* Configure the SNW capabilities */ phy_cap.all = 0; @@ -149,15 +144,64 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, phy_cap.gen3_no_ssc = 1; phy_cap.gen2_no_ssc = 1; phy_cap.gen1_no_ssc = 1; - if (ihost->oem_parameters.controller.do_enable_ssc == true) { + if (ihost->oem_parameters.controller.do_enable_ssc) { + struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe; + struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_idx]; + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); + bool en_sas = false; + bool en_sata = false; + u32 sas_type = 0; + u32 sata_spread = 0x2; + u32 sas_spread = 0x2; + phy_cap.gen3_ssc = 1; phy_cap.gen2_ssc = 1; phy_cap.gen1_ssc = 1; + + if (pci_info->orom->hdr.version < ISCI_ROM_VER_1_1) + en_sas = en_sata = true; + else { + sata_spread = ihost->oem_parameters.controller.ssc_sata_tx_spread_level; + sas_spread = ihost->oem_parameters.controller.ssc_sas_tx_spread_level; + + if (sata_spread) + en_sata = true; + + if (sas_spread) { + en_sas = true; + sas_type = ihost->oem_parameters.controller.ssc_sas_tx_type; + } + + } + + if (en_sas) { + u32 reg; + + reg = readl(&xcvr->afe_xcvr_control0); + reg |= (0x00100000 | (sas_type << 19)); + writel(reg, &xcvr->afe_xcvr_control0); + + reg = readl(&xcvr->afe_tx_ssc_control); + reg |= sas_spread << 8; + writel(reg, &xcvr->afe_tx_ssc_control); + } + + if (en_sata) { + u32 reg; + + reg = readl(&xcvr->afe_tx_ssc_control); + reg |= sata_spread; + writel(reg, &xcvr->afe_tx_ssc_control); + + reg = readl(&llr->stp_control); + reg |= 1 << 12; + writel(reg, &llr->stp_control); + } } - /* - * The SAS specification indicates that the phy_capabilities that - * are transmitted shall have an even parity. Calculate the parity. */ + /* The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. + */ parity_check = phy_cap.all; while (parity_check != 0) { if (parity_check & 0x1) @@ -165,20 +209,20 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, parity_check >>= 1; } - /* - * If parity indicates there are an odd number of bits set, then - * set the parity bit to 1 in the phy capabilities. */ + /* If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. + */ if ((parity_count % 2) != 0) phy_cap.parity = 1; - writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities); + writel(phy_cap.all, &llr->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ writel(SCU_ENSPINUP_GEN_VAL(COUNT, phy_user->notify_enable_spin_up_insertion_frequency), - &iphy->link_layer_registers->notify_enable_spinup_control); + &llr->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state @@ -189,11 +233,13 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); - writel(clksm_value, &iphy->link_layer_registers->clock_skew_management); + writel(clksm_value, &llr->clock_skew_management); - /* @todo Provide a way to write this register correctly */ - writel(0x02108421, - &iphy->link_layer_registers->afe_lookup_table_control); + if (is_c0(ihost->pdev) || is_c1(ihost->pdev)) { + writel(0x04210400, &llr->afe_lookup_table_control); + writel(0x020A7C05, &llr->sas_primitive_timeout); + } else + writel(0x02108421, &llr->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)ihost->user_parameters.no_outbound_task_timeout); @@ -210,9 +256,9 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - writel(llctl, &iphy->link_layer_registers->link_layer_control); + writel(llctl, &llr->link_layer_control); - sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts); + sp_timeouts = readl(&llr->sas_phy_timeouts); /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF); @@ -222,20 +268,23 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, */ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B); - writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts); + writel(sp_timeouts, &llr->sas_phy_timeouts); if (is_a2(ihost->pdev)) { - /* Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. + /* Program the max ARB time for the PHY to 700us so we + * inter-operate with the PMC expander which shuts down + * PHYs if the expander PHY generates too many breaks. + * This time value will guarantee that the initiator PHY + * will generate the break. */ writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, - &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + &llr->maximum_arbitration_wait_timer_timeout); } - /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ - writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout); + /* Disable link layer hang detection, rely on the OS timeout for + * I/O timeouts. + */ + writel(0, &llr->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_change_state(&iphy->sm, SCI_PHY_STOPPED); @@ -1049,24 +1098,25 @@ static void scu_link_layer_stop_protocol_engine( writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control); } -/** - * - * - * This method will start the OOB/SN state machine for this struct isci_phy object. - */ -static void scu_link_layer_start_oob( - struct isci_phy *iphy) +static void scu_link_layer_start_oob(struct isci_phy *iphy) { - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&iphy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | - SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); - writel(scu_sas_pcfg_value, - &iphy->link_layer_registers->phy_configuration); + struct scu_link_layer_registers __iomem *ll = iphy->link_layer_registers; + u32 val; + + /** Reset OOB sequence - start */ + val = readl(&ll->phy_configuration); + val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + writel(val, &ll->phy_configuration); + readl(&ll->phy_configuration); /* flush */ + /** Reset OOB sequence - end */ + + /** Start OOB sequence - start */ + val = readl(&ll->phy_configuration); + val |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(val, &ll->phy_configuration); + readl(&ll->phy_configuration); /* flush */ + /** Start OOB sequence - end */ } /** diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index ac7f27749f9..7c6ac58a5c4 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -114,7 +114,7 @@ static u32 sci_port_get_phys(struct isci_port *iport) * value is returned if the specified port is not valid. When this value is * returned, no data is copied to the properties output parameter. */ -static enum sci_status sci_port_get_properties(struct isci_port *iport, +enum sci_status sci_port_get_properties(struct isci_port *iport, struct sci_port_properties *prop) { if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT) @@ -647,19 +647,26 @@ void sci_port_setup_transports(struct isci_port *iport, u32 device_id) } } -static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, - bool do_notify_user) +static void sci_port_resume_phy(struct isci_port *iport, struct isci_phy *iphy) +{ + sci_phy_resume(iphy); + iport->enabled_phy_mask |= 1 << iphy->phy_index; +} + +static void sci_port_activate_phy(struct isci_port *iport, + struct isci_phy *iphy, + u8 flags) { struct isci_host *ihost = iport->owning_controller; - if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA && (flags & PF_RESUME)) sci_phy_resume(iphy); iport->active_phy_mask |= 1 << iphy->phy_index; sci_controller_clear_invalid_phy(ihost, iphy); - if (do_notify_user == true) + if (flags & PF_NOTIFY) isci_port_link_up(ihost, iport, iphy); } @@ -669,14 +676,19 @@ void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, struct isci_host *ihost = iport->owning_controller; iport->active_phy_mask &= ~(1 << iphy->phy_index); + iport->enabled_phy_mask &= ~(1 << iphy->phy_index); if (!iport->active_phy_mask) iport->last_active_phy = iphy->phy_index; iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; - /* Re-assign the phy back to the LP as if it were a narrow port */ - writel(iphy->phy_index, - &iport->port_pe_configuration_register[iphy->phy_index]); + /* Re-assign the phy back to the LP as if it were a narrow port for APC + * mode. For MPC mode, the phy will remain in the port. + */ + if (iport->owning_controller->oem_parameters.controller.mode_type == + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) + writel(iphy->phy_index, + &iport->port_pe_configuration_register[iphy->phy_index]); if (do_notify_user == true) isci_port_link_down(ihost, iphy, iport); @@ -701,18 +713,16 @@ static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *i * sci_port_general_link_up_handler - phy can be assigned to port? * @sci_port: sci_port object for which has a phy that has gone link up. * @sci_phy: This is the struct isci_phy object that has gone link up. - * @do_notify_user: This parameter specifies whether to inform the user (via - * sci_port_link_up()) as to the fact that a new phy as become ready. + * @flags: PF_RESUME, PF_NOTIFY to sci_port_activate_phy * - * Determine if this phy can be assigned to this - * port . If the phy is not a valid PHY for - * this port then the function will notify the user. A PHY can only be - * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in - * the same port. none + * Determine if this phy can be assigned to this port . If the phy is + * not a valid PHY for this port then the function will notify the user. + * A PHY can only be part of a port if it's attached SAS ADDRESS is the + * same as all other PHYs in the same port. */ static void sci_port_general_link_up_handler(struct isci_port *iport, - struct isci_phy *iphy, - bool do_notify_user) + struct isci_phy *iphy, + u8 flags) { struct sci_sas_address port_sas_address; struct sci_sas_address phy_sas_address; @@ -730,7 +740,7 @@ static void sci_port_general_link_up_handler(struct isci_port *iport, iport->active_phy_mask == 0) { struct sci_base_state_machine *sm = &iport->sm; - sci_port_activate_phy(iport, iphy, do_notify_user); + sci_port_activate_phy(iport, iphy, flags); if (sm->current_state_id == SCI_PORT_RESETTING) port_state_machine_change(iport, SCI_PORT_READY); } else @@ -781,11 +791,16 @@ bool sci_port_link_detected( struct isci_phy *iphy) { if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) && - (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && - sci_port_is_wide(iport)) { - sci_port_invalid_link_up(iport, iphy); - - return false; + (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA)) { + if (sci_port_is_wide(iport)) { + sci_port_invalid_link_up(iport, iphy); + return false; + } else { + struct isci_host *ihost = iport->owning_controller; + struct isci_port *dst_port = &(ihost->ports[iphy->phy_index]); + writel(iphy->phy_index, + &dst_port->port_pe_configuration_register[iphy->phy_index]); + } } return true; @@ -975,6 +990,13 @@ static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine } } +static void scic_sds_port_ready_substate_waiting_exit( + struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + sci_port_resume_port_task_scheduler(iport); +} + static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) { u32 index; @@ -988,13 +1010,13 @@ static void sci_port_ready_substate_operational_enter(struct sci_base_state_mach writel(iport->physical_port_index, &iport->port_pe_configuration_register[ iport->phy_table[index]->phy_index]); + if (((iport->active_phy_mask^iport->enabled_phy_mask) & (1 << index)) != 0) + sci_port_resume_phy(iport, iport->phy_table[index]); } } sci_port_update_viit_entry(iport); - sci_port_resume_port_task_scheduler(iport); - /* * Post the dummy task for the port so the hardware can schedule * io correctly @@ -1061,20 +1083,9 @@ static void sci_port_ready_substate_configuring_enter(struct sci_base_state_mach if (iport->active_phy_mask == 0) { isci_port_not_ready(ihost, iport); - port_state_machine_change(iport, - SCI_PORT_SUB_WAITING); - } else if (iport->started_request_count == 0) - port_state_machine_change(iport, - SCI_PORT_SUB_OPERATIONAL); -} - -static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) -{ - struct isci_port *iport = container_of(sm, typeof(*iport), sm); - - sci_port_suspend_port_task_scheduler(iport); - if (iport->ready_exit) - sci_port_invalidate_dummy_remote_node(iport); + port_state_machine_change(iport, SCI_PORT_SUB_WAITING); + } else + port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); } enum sci_status sci_port_start(struct isci_port *iport) @@ -1252,7 +1263,7 @@ enum sci_status sci_port_add_phy(struct isci_port *iport, if (status != SCI_SUCCESS) return status; - sci_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME); iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); @@ -1262,7 +1273,7 @@ enum sci_status sci_port_add_phy(struct isci_port *iport, if (status != SCI_SUCCESS) return status; - sci_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY); /* Re-enter the configuring state since this may be the last phy in * the port. @@ -1338,13 +1349,13 @@ enum sci_status sci_port_link_up(struct isci_port *iport, /* Since this is the first phy going link up for the port we * can just enable it and continue */ - sci_port_activate_phy(iport, iphy, true); + sci_port_activate_phy(iport, iphy, PF_NOTIFY|PF_RESUME); port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); return SCI_SUCCESS; case SCI_PORT_SUB_OPERATIONAL: - sci_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME); return SCI_SUCCESS; case SCI_PORT_RESETTING: /* TODO We should make sure that the phy that has gone @@ -1361,7 +1372,7 @@ enum sci_status sci_port_link_up(struct isci_port *iport, /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - sci_port_general_link_up_handler(iport, iphy, false); + sci_port_general_link_up_handler(iport, iphy, PF_RESUME); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(iport), @@ -1584,14 +1595,14 @@ static const struct sci_base_state sci_port_state_table[] = { }, [SCI_PORT_SUB_WAITING] = { .enter_state = sci_port_ready_substate_waiting_enter, + .exit_state = scic_sds_port_ready_substate_waiting_exit, }, [SCI_PORT_SUB_OPERATIONAL] = { .enter_state = sci_port_ready_substate_operational_enter, .exit_state = sci_port_ready_substate_operational_exit }, [SCI_PORT_SUB_CONFIGURING] = { - .enter_state = sci_port_ready_substate_configuring_enter, - .exit_state = sci_port_ready_substate_configuring_exit + .enter_state = sci_port_ready_substate_configuring_enter }, [SCI_PORT_RESETTING] = { .exit_state = sci_port_resetting_state_exit @@ -1609,6 +1620,7 @@ void sci_port_construct(struct isci_port *iport, u8 index, iport->logical_port_index = SCIC_SDS_DUMMY_PORT; iport->physical_port_index = index; iport->active_phy_mask = 0; + iport->enabled_phy_mask = 0; iport->last_active_phy = 0; iport->ready_exit = false; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index cb5ffbc3860..08116090eb7 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -63,6 +63,9 @@ #define SCIC_SDS_DUMMY_PORT 0xFF +#define PF_NOTIFY (1 << 0) +#define PF_RESUME (1 << 1) + struct isci_phy; struct isci_host; @@ -83,6 +86,8 @@ enum isci_status { * @logical_port_index: software port index * @physical_port_index: hardware port index * @active_phy_mask: identifies phy members + * @enabled_phy_mask: phy mask for the port + * that are already part of the port * @reserved_tag: * @reserved_rni: reserver for port task scheduler workaround * @started_request_count: reference count for outstanding commands @@ -104,6 +109,7 @@ struct isci_port { u8 logical_port_index; u8 physical_port_index; u8 active_phy_mask; + u8 enabled_phy_mask; u8 last_active_phy; u16 reserved_rni; u16 reserved_tag; @@ -250,6 +256,10 @@ bool sci_port_link_detected( struct isci_port *iport, struct isci_phy *iphy); +enum sci_status sci_port_get_properties( + struct isci_port *iport, + struct sci_port_properties *prop); + enum sci_status sci_port_link_up(struct isci_port *iport, struct isci_phy *iphy); enum sci_status sci_port_link_down(struct isci_port *iport, diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index 38a99d28114..6d1e9544cbe 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -57,7 +57,7 @@ #define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) #define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) -#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (250) enum SCIC_SDS_APC_ACTIVITY { SCIC_SDS_APC_SKIP_PHY, @@ -466,6 +466,23 @@ sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, return sci_port_configuration_agent_validate_ports(ihost, port_agent); } +/* + * This routine will restart the automatic port configuration timeout + * timer for the next time period. This could be caused by either a link + * down event or a link up event where we can not yet tell to which a phy + * belongs. + */ +static void sci_apc_agent_start_timer( + struct sci_port_configuration_agent *port_agent, + u32 timeout) +{ + if (port_agent->timer_pending) + sci_del_timer(&port_agent->timer); + + port_agent->timer_pending = true; + sci_mod_timer(&port_agent->timer, timeout); +} + static void sci_apc_agent_configure_ports(struct isci_host *ihost, struct sci_port_configuration_agent *port_agent, struct isci_phy *iphy, @@ -565,17 +582,8 @@ static void sci_apc_agent_configure_ports(struct isci_host *ihost, break; case SCIC_SDS_APC_START_TIMER: - /* - * This can occur for either a link down event, or a link - * up event where we cannot yet tell the port to which a - * phy belongs. - */ - if (port_agent->timer_pending) - sci_del_timer(&port_agent->timer); - - port_agent->timer_pending = true; - sci_mod_timer(&port_agent->timer, - SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); + sci_apc_agent_start_timer(port_agent, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); break; case SCIC_SDS_APC_SKIP_PHY: @@ -607,7 +615,8 @@ static void sci_apc_agent_link_up(struct isci_host *ihost, if (!iport) { /* the phy is not the part of this port */ port_agent->phy_ready_mask |= 1 << phy_index; - sci_apc_agent_configure_ports(ihost, port_agent, iphy, true); + sci_apc_agent_start_timer(port_agent, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); } else { /* the phy is already the part of the port */ u32 port_state = iport->sm.current_state_id; diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index b5f4341de24..9b8117b9d75 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -147,7 +147,7 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw memcpy(orom, fw->data, fw->size); - if (is_c0(pdev)) + if (is_c0(pdev) || is_c1(pdev)) goto out; /* diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 2c75248ca32..bb0e9d4d97c 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -152,7 +152,7 @@ struct sci_user_parameters { #define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 struct sci_oem_params; -int sci_oem_parameters_validate(struct sci_oem_params *oem); +int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version); struct isci_orom; struct isci_orom *isci_request_oprom(struct pci_dev *pdev); @@ -191,6 +191,11 @@ struct isci_oem_hdr { 0x1a, 0x04, 0xc6) #define ISCI_EFI_VAR_NAME "RstScuO" +#define ISCI_ROM_VER_1_0 0x10 +#define ISCI_ROM_VER_1_1 0x11 +#define ISCI_ROM_VER_1_3 0x13 +#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_3 + /* Allowed PORT configuration modes APC Automatic PORT configuration mode is * defined by the OEM configuration parameters providing no PHY_MASK parameters * for any PORT. i.e. There are no phys assigned to any of the ports at start. @@ -220,8 +225,86 @@ struct sci_oem_params { struct { uint8_t mode_type; uint8_t max_concurr_spin_up; - uint8_t do_enable_ssc; - uint8_t reserved; + /* + * This bitfield indicates the OEM's desired default Tx + * Spread Spectrum Clocking (SSC) settings for SATA and SAS. + * NOTE: Default SSC Modulation Frequency is 31.5KHz. + */ + union { + struct { + /* + * NOTE: Max spread for SATA is +0 / -5000 PPM. + * Down-spreading SSC (only method allowed for SATA): + * SATA SSC Tx Disabled = 0x0 + * SATA SSC Tx at +0 / -1419 PPM Spread = 0x2 + * SATA SSC Tx at +0 / -2129 PPM Spread = 0x3 + * SATA SSC Tx at +0 / -4257 PPM Spread = 0x6 + * SATA SSC Tx at +0 / -4967 PPM Spread = 0x7 + */ + uint8_t ssc_sata_tx_spread_level:4; + /* + * SAS SSC Tx Disabled = 0x0 + * + * NOTE: Max spread for SAS down-spreading +0 / + * -2300 PPM + * Down-spreading SSC: + * SAS SSC Tx at +0 / -1419 PPM Spread = 0x2 + * SAS SSC Tx at +0 / -2129 PPM Spread = 0x3 + * + * NOTE: Max spread for SAS center-spreading +2300 / + * -2300 PPM + * Center-spreading SSC: + * SAS SSC Tx at +1064 / -1064 PPM Spread = 0x3 + * SAS SSC Tx at +2129 / -2129 PPM Spread = 0x6 + */ + uint8_t ssc_sas_tx_spread_level:3; + /* + * NOTE: Refer to the SSC section of the SAS 2.x + * Specification for proper setting of this field. + * For standard SAS Initiator SAS PHY operation it + * should be 0 for Down-spreading. + * SAS SSC Tx spread type: + * Down-spreading SSC = 0 + * Center-spreading SSC = 1 + */ + uint8_t ssc_sas_tx_type:1; + }; + uint8_t do_enable_ssc; + }; + /* + * This field indicates length of the SAS/SATA cable between + * host and device. + * This field is used make relationship between analog + * parameters of the phy in the silicon and length of the cable. + * Supported cable attenuation levels: + * "short"- up to 3m, "medium"-3m to 6m, and "long"- more than + * 6m. + * + * This is bit mask field: + * + * BIT: (MSB) 7 6 5 4 + * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Medium cable + * length assignment + * BIT: 3 2 1 0 (LSB) + * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Long cable length + * assignment + * + * BITS 7-4 are set when the cable length is assigned to medium + * BITS 3-0 are set when the cable length is assigned to long + * + * The BIT positions are clear when the cable length is + * assigned to short. + * + * Setting the bits for both long and medium cable length is + * undefined. + * + * A value of 0x84 would assign + * phy3 - medium + * phy2 - long + * phy1 - short + * phy0 - short + */ + uint8_t cable_selection_mask; } controller; struct { diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index b207cd3b15a..dd74b6ceeb8 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <scsi/sas.h> +#include <linux/bitops.h> #include "isci.h" #include "port.h" #include "remote_device.h" @@ -1101,6 +1102,7 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, struct isci_remote_device *idev) { enum sci_status status; + struct sci_port_properties properties; struct domain_device *dev = idev->domain_dev; sci_remote_device_construct(iport, idev); @@ -1110,6 +1112,11 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, * entries will be needed to store the remote node. */ idev->is_direct_attached = true; + + sci_port_get_properties(iport, &properties); + /* Get accurate port width from port's phy mask for a DA device. */ + idev->device_port_width = hweight32(properties.phy_mask); + status = sci_controller_allocate_remote_node_context(iport->owning_controller, idev, &idev->rnc.remote_node_index); @@ -1125,9 +1132,6 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, idev->connection_rate = sci_port_get_max_allowed_speed(iport); - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - idev->device_port_width = 1; - return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 66ad3dc8949..f5a3f7d2bda 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -496,7 +496,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost, } } - isci_print_tmf(tmf); + isci_print_tmf(ihost, tmf); if (tmf->status == SCI_SUCCESS) ret = TMF_RESP_FUNC_COMPLETE; diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index bc78c0a41d5..1b27b3797c6 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -106,7 +106,6 @@ struct isci_tmf { } resp; unsigned char lun[8]; u16 io_tag; - struct isci_remote_device *device; enum isci_tmf_function_codes tmf_code; int status; @@ -120,10 +119,10 @@ struct isci_tmf { }; -static inline void isci_print_tmf(struct isci_tmf *tmf) +static inline void isci_print_tmf(struct isci_host *ihost, struct isci_tmf *tmf) { if (SAS_PROTOCOL_SATA == tmf->proto) - dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: status = %x\n" "tmf->resp.d2h_fis.status = %x\n" "tmf->resp.d2h_fis.error = %x\n", @@ -132,7 +131,7 @@ static inline void isci_print_tmf(struct isci_tmf *tmf) tmf->resp.d2h_fis.status, tmf->resp.d2h_fis.error); else - dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: status = %x\n" "tmf->resp.resp_iu.data_present = %x\n" "tmf->resp.resp_iu.status = %x\n" diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 7269e928824..1d1b0c9da29 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -61,7 +61,7 @@ static void fc_disc_restart(struct fc_disc *); * Locking Note: This function expects that the lport mutex is locked before * calling it. */ -void fc_disc_stop_rports(struct fc_disc *disc) +static void fc_disc_stop_rports(struct fc_disc *disc) { struct fc_lport *lport; struct fc_rport_priv *rdata; @@ -682,7 +682,7 @@ static int fc_disc_single(struct fc_lport *lport, struct fc_disc_port *dp) * fc_disc_stop() - Stop discovery for a given lport * @lport: The local port that discovery should stop on */ -void fc_disc_stop(struct fc_lport *lport) +static void fc_disc_stop(struct fc_lport *lport) { struct fc_disc *disc = &lport->disc; @@ -698,7 +698,7 @@ void fc_disc_stop(struct fc_lport *lport) * This function will block until discovery has been * completely stopped and all rports have been deleted. */ -void fc_disc_stop_final(struct fc_lport *lport) +static void fc_disc_stop_final(struct fc_lport *lport) { fc_disc_stop(lport); lport->tt.rport_flush_queue(); diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index fb9161dc4ca..e17a28d324d 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -28,6 +28,7 @@ #include <scsi/fc/fc_els.h> #include <scsi/libfc.h> #include <scsi/fc_encode.h> +#include "fc_libfc.h" /** * fc_elsct_send() - Send an ELS or CT frame diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 9de9db27e87..4d70d96fa5d 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -91,7 +91,7 @@ struct fc_exch_pool { * It manages the allocation of exchange IDs. */ struct fc_exch_mgr { - struct fc_exch_pool *pool; + struct fc_exch_pool __percpu *pool; mempool_t *ep_pool; enum fc_class class; struct kref kref; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 221875ec3d7..f607314810a 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -155,6 +155,7 @@ static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp) fsp->xfer_ddp = FC_XID_UNKNOWN; atomic_set(&fsp->ref_cnt, 1); init_timer(&fsp->timer); + fsp->timer.data = (unsigned long)fsp; INIT_LIST_HEAD(&fsp->list); spin_lock_init(&fsp->scsi_pkt_lock); } @@ -1850,9 +1851,6 @@ int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd) } put_cpu(); - init_timer(&fsp->timer); - fsp->timer.data = (unsigned long)fsp; - /* * send it to the lower layer * if we get -1 return then put the request in the pending diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e77094a587e..83750ebb527 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -677,7 +677,8 @@ EXPORT_SYMBOL(fc_set_mfs); * @lport: The local port receiving the event * @event: The discovery event */ -void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) +static void fc_lport_disc_callback(struct fc_lport *lport, + enum fc_disc_event event) { switch (event) { case DISC_EV_SUCCESS: @@ -1568,7 +1569,7 @@ EXPORT_SYMBOL(fc_lport_flogi_resp); * Locking Note: The lport lock is expected to be held before calling * this routine. */ -void fc_lport_enter_flogi(struct fc_lport *lport) +static void fc_lport_enter_flogi(struct fc_lport *lport) { struct fc_frame *fp; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index b9e434844a6..83aa1efec87 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -391,7 +391,7 @@ static void fc_rport_work(struct work_struct *work) * If it appears we are already logged in, ADISC is used to verify * the setup. */ -int fc_rport_login(struct fc_rport_priv *rdata) +static int fc_rport_login(struct fc_rport_priv *rdata) { mutex_lock(&rdata->rp_mutex); @@ -451,7 +451,7 @@ static void fc_rport_enter_delete(struct fc_rport_priv *rdata, * function will hold the rport lock, call an _enter_* * function and then unlock the rport. */ -int fc_rport_logoff(struct fc_rport_priv *rdata) +static int fc_rport_logoff(struct fc_rport_priv *rdata) { mutex_lock(&rdata->rp_mutex); @@ -653,8 +653,8 @@ static int fc_rport_login_complete(struct fc_rport_priv *rdata, * @fp: The FLOGI response frame * @rp_arg: The remote port that received the FLOGI response */ -void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, - void *rp_arg) +static void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) { struct fc_rport_priv *rdata = rp_arg; struct fc_lport *lport = rdata->local_port; @@ -1520,7 +1520,7 @@ reject: * * Locking Note: Called with the lport lock held. */ -void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp) +static void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp) { struct fc_seq_els_data els_data; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 5c1776406c9..15eefa1d61f 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -306,19 +306,22 @@ mega_query_adapter(adapter_t *adapter) adapter->host->sg_tablesize = adapter->sglen; - /* use HP firmware and bios version encoding */ + /* use HP firmware and bios version encoding + Note: fw_version[0|1] and bios_version[0|1] were originally shifted + right 8 bits making them zero. This 0 value was hardcoded to fix + sparse warnings. */ if (adapter->product_info.subsysvid == HP_SUBSYS_VID) { sprintf (adapter->fw_version, "%c%d%d.%d%d", adapter->product_info.fw_version[2], - adapter->product_info.fw_version[1] >> 8, + 0, adapter->product_info.fw_version[1] & 0x0f, - adapter->product_info.fw_version[0] >> 8, + 0, adapter->product_info.fw_version[0] & 0x0f); sprintf (adapter->bios_version, "%c%d%d.%d%d", adapter->product_info.bios_version[2], - adapter->product_info.bios_version[1] >> 8, + 0, adapter->product_info.bios_version[1] & 0x0f, - adapter->product_info.bios_version[0] >> 8, + 0, adapter->product_info.bios_version[0] & 0x0f); } else { memcpy(adapter->fw_version, diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index dd94c7d574f..e5f416f8042 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -33,9 +33,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.06.12-rc1" -#define MEGASAS_RELDATE "Oct. 5, 2011" -#define MEGASAS_EXT_VERSION "Wed. Oct. 5 17:00:00 PDT 2011" +#define MEGASAS_VERSION "00.00.06.14-rc1" +#define MEGASAS_RELDATE "Jan. 6, 2012" +#define MEGASAS_EXT_VERSION "Fri. Jan. 6 17:00:00 PDT 2012" /* * Device IDs @@ -773,7 +773,6 @@ struct megasas_ctrl_info { #define MFI_OB_INTR_STATUS_MASK 0x00000002 #define MFI_POLL_TIMEOUT_SECS 60 -#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10) #define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 #define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001 @@ -1353,7 +1352,6 @@ struct megasas_instance { u32 mfiStatus; u32 last_seq_num; - struct timer_list io_completion_timer; struct list_head internal_reset_pending_q; /* Ptr to hba specific information */ diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 29a994f9c4f..8b300be4428 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -18,7 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * FILE: megaraid_sas_base.c - * Version : v00.00.06.12-rc1 + * Version : v00.00.06.14-rc1 * * Authors: LSI Corporation * Sreenivas Bagalkote @@ -59,14 +59,6 @@ #include "megaraid_sas.h" /* - * poll_mode_io:1- schedule complete completion from q cmd - */ -static unsigned int poll_mode_io; -module_param_named(poll_mode_io, poll_mode_io, int, 0); -MODULE_PARM_DESC(poll_mode_io, - "Complete cmds from IO path, (default=0)"); - -/* * Number of sectors per IO command * Will be set in megasas_init_mfi if user does not provide */ @@ -1439,11 +1431,6 @@ megasas_build_and_issue_cmd(struct megasas_instance *instance, instance->instancet->fire_cmd(instance, cmd->frame_phys_addr, cmd->frame_count-1, instance->reg_set); - /* - * Check if we have pend cmds to be completed - */ - if (poll_mode_io && atomic_read(&instance->fw_outstanding)) - tasklet_schedule(&instance->isr_tasklet); return 0; out_return_cmd: @@ -3370,47 +3357,6 @@ fail_fw_init: return -EINVAL; } -/** - * megasas_start_timer - Initializes a timer object - * @instance: Adapter soft state - * @timer: timer object to be initialized - * @fn: timer function - * @interval: time interval between timer function call - */ -static inline void -megasas_start_timer(struct megasas_instance *instance, - struct timer_list *timer, - void *fn, unsigned long interval) -{ - init_timer(timer); - timer->expires = jiffies + interval; - timer->data = (unsigned long)instance; - timer->function = fn; - add_timer(timer); -} - -/** - * megasas_io_completion_timer - Timer fn - * @instance_addr: Address of adapter soft state - * - * Schedules tasklet for cmd completion - * if poll_mode_io is set - */ -static void -megasas_io_completion_timer(unsigned long instance_addr) -{ - struct megasas_instance *instance = - (struct megasas_instance *)instance_addr; - - if (atomic_read(&instance->fw_outstanding)) - tasklet_schedule(&instance->isr_tasklet); - - /* Restart timer */ - if (poll_mode_io) - mod_timer(&instance->io_completion_timer, - jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL); -} - static u32 megasas_init_adapter_mfi(struct megasas_instance *instance) { @@ -3638,11 +3584,6 @@ static int megasas_init_fw(struct megasas_instance *instance) tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet, (unsigned long)instance); - /* Initialize the cmd completion timer */ - if (poll_mode_io) - megasas_start_timer(instance, &instance->io_completion_timer, - megasas_io_completion_timer, - MEGASAS_COMPLETION_TIMER_INTERVAL); return 0; fail_init_adapter: @@ -4369,9 +4310,6 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state) host = instance->host; instance->unload = 1; - if (poll_mode_io) - del_timer_sync(&instance->io_completion_timer); - megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN); @@ -4511,12 +4449,6 @@ megasas_resume(struct pci_dev *pdev) } instance->instancet->enable_intr(instance->reg_set); - - /* Initialize the cmd completion timer */ - if (poll_mode_io) - megasas_start_timer(instance, &instance->io_completion_timer, - megasas_io_completion_timer, - MEGASAS_COMPLETION_TIMER_INTERVAL); instance->unload = 0; /* @@ -4570,9 +4502,6 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev) host = instance->host; fusion = instance->ctrl_context; - if (poll_mode_io) - del_timer_sync(&instance->io_completion_timer); - scsi_remove_host(instance->host); megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); @@ -4773,6 +4702,8 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE); cmd->frame->hdr.context = cmd->index; cmd->frame->hdr.pad_0 = 0; + cmd->frame->hdr.flags &= ~(MFI_FRAME_IEEE | MFI_FRAME_SGL64 | + MFI_FRAME_SENSE64); /* * The management interface between applications and the fw uses @@ -5219,60 +5150,6 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl, megasas_sysfs_set_dbg_lvl); -static ssize_t -megasas_sysfs_show_poll_mode_io(struct device_driver *dd, char *buf) -{ - return sprintf(buf, "%u\n", poll_mode_io); -} - -static ssize_t -megasas_sysfs_set_poll_mode_io(struct device_driver *dd, - const char *buf, size_t count) -{ - int retval = count; - int tmp = poll_mode_io; - int i; - struct megasas_instance *instance; - - if (sscanf(buf, "%u", &poll_mode_io) < 1) { - printk(KERN_ERR "megasas: could not set poll_mode_io\n"); - retval = -EINVAL; - } - - /* - * Check if poll_mode_io is already set or is same as previous value - */ - if ((tmp && poll_mode_io) || (tmp == poll_mode_io)) - goto out; - - if (poll_mode_io) { - /* - * Start timers for all adapters - */ - for (i = 0; i < megasas_mgmt_info.max_index; i++) { - instance = megasas_mgmt_info.instance[i]; - if (instance) { - megasas_start_timer(instance, - &instance->io_completion_timer, - megasas_io_completion_timer, - MEGASAS_COMPLETION_TIMER_INTERVAL); - } - } - } else { - /* - * Delete timers for all adapters - */ - for (i = 0; i < megasas_mgmt_info.max_index; i++) { - instance = megasas_mgmt_info.instance[i]; - if (instance) - del_timer_sync(&instance->io_completion_timer); - } - } - -out: - return retval; -} - static void megasas_aen_polling(struct work_struct *work) { @@ -5502,11 +5379,6 @@ megasas_aen_polling(struct work_struct *work) kfree(ev); } - -static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR, - megasas_sysfs_show_poll_mode_io, - megasas_sysfs_set_poll_mode_io); - /** * megasas_init - Driver load entry point */ @@ -5566,11 +5438,6 @@ static int __init megasas_init(void) if (rval) goto err_dcf_dbg_lvl; rval = driver_create_file(&megasas_pci_driver.driver, - &driver_attr_poll_mode_io); - if (rval) - goto err_dcf_poll_mode_io; - - rval = driver_create_file(&megasas_pci_driver.driver, &driver_attr_support_device_change); if (rval) goto err_dcf_support_device_change; @@ -5579,10 +5446,6 @@ static int __init megasas_init(void) err_dcf_support_device_change: driver_remove_file(&megasas_pci_driver.driver, - &driver_attr_poll_mode_io); - -err_dcf_poll_mode_io: - driver_remove_file(&megasas_pci_driver.driver, &driver_attr_dbg_lvl); err_dcf_dbg_lvl: driver_remove_file(&megasas_pci_driver.driver, @@ -5607,8 +5470,6 @@ err_pcidrv: static void __exit megasas_exit(void) { driver_remove_file(&megasas_pci_driver.driver, - &driver_attr_poll_mode_io); - driver_remove_file(&megasas_pci_driver.driver, &driver_attr_dbg_lvl); driver_remove_file(&megasas_pci_driver.driver, &driver_attr_support_poll_for_event); diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c index 5255dd688ac..294abb0defa 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -282,7 +282,9 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow, else { *pDevHandle = MR_PD_INVALID; /* set dev handle as invalid. */ if ((raid->level >= 5) && - (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER)) + ((instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER && + raid->regTypeReqOnRead != REGION_TYPE_UNUSED))) pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE; else if (raid->level == 1) { /* Get alternate Pd. */ diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 22a3ff02e48..bfe68545203 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -150,6 +150,8 @@ #define QL4_SESS_RECOVERY_TMO 120 /* iSCSI session */ /* recovery timeout */ +#define MSB(x) ((uint8_t)((uint16_t)(x) >> 8)) +#define LSW(x) ((uint16_t)(x)) #define LSDW(x) ((u32)((u64)(x))) #define MSDW(x) ((u32)((((u64)(x)) >> 16) >> 16)) @@ -671,6 +673,7 @@ struct scsi_qla_host { uint16_t pri_ddb_idx; uint16_t sec_ddb_idx; int is_reset; + uint16_t temperature; }; struct ql4_task_data { diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 1bdfa8120ac..90614f38b55 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -697,6 +697,9 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha) writel(set_rmask(CSR_SCSI_PROCESSOR_INTR), &ha->reg->ctrl_status); readl(&ha->reg->ctrl_status); + writel(set_rmask(CSR_SCSI_COMPLETION_INTR), + &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) { DEBUG2(printk("scsi%ld: %s: Get firmware " diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c2593782fbb..e1e66a45e4d 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -219,6 +219,13 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, ha->mailbox_timeout_count++; mbx_sts[0] = (-1); set_bit(DPC_RESET_HA, &ha->dpc_flags); + if (is_qla8022(ha)) { + ql4_printk(KERN_INFO, ha, + "disabling pause transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); + } goto mbox_exit; } diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 8d6bc1b2ff1..78f1111158d 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -1875,6 +1875,11 @@ exit: int qla4_8xxx_load_risc(struct scsi_qla_host *ha) { int retval; + + /* clear the interrupt */ + writel(0, &ha->qla4_8xxx_reg->host_int); + readl(&ha->qla4_8xxx_reg->host_int); + retval = qla4_8xxx_device_state_handler(ha); if (retval == QLA_SUCCESS && !test_bit(AF_INIT_DONE, &ha->flags)) diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h index 35376a1c3f1..dc45ac92369 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.h +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -19,12 +19,28 @@ #define PHAN_PEG_RCV_INITIALIZED 0xff01 /*CRB_RELATED*/ -#define QLA82XX_CRB_BASE QLA82XX_CAM_RAM(0x200) -#define QLA82XX_REG(X) (QLA82XX_CRB_BASE+(X)) - +#define QLA82XX_CRB_BASE (QLA82XX_CAM_RAM(0x200)) +#define QLA82XX_REG(X) (QLA82XX_CRB_BASE+(X)) #define CRB_CMDPEG_STATE QLA82XX_REG(0x50) #define CRB_RCVPEG_STATE QLA82XX_REG(0x13c) #define CRB_DMA_SHIFT QLA82XX_REG(0xcc) +#define CRB_TEMP_STATE QLA82XX_REG(0x1b4) + +#define qla82xx_get_temp_val(x) ((x) >> 16) +#define qla82xx_get_temp_state(x) ((x) & 0xffff) +#define qla82xx_encode_temp(val, state) (((val) << 16) | (state)) + +/* + * Temperature control. + */ +enum { + QLA82XX_TEMP_NORMAL = 0x1, /* Normal operating range */ + QLA82XX_TEMP_WARN, /* Sound alert, temperature getting high */ + QLA82XX_TEMP_PANIC /* Fatal error, hardware has shut down. */ +}; + +#define CRB_NIU_XG_PAUSE_CTL_P0 0x1 +#define CRB_NIU_XG_PAUSE_CTL_P1 0x8 #define QLA82XX_HW_H0_CH_HUB_ADR 0x05 #define QLA82XX_HW_H1_CH_HUB_ADR 0x0E diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index ec393a00c03..ce6d3b7f0c6 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -35,43 +35,44 @@ static struct kmem_cache *srb_cachep; int ql4xdisablesysfsboot = 1; module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdisablesysfsboot, - "Set to disable exporting boot targets to sysfs\n" - " 0 - Export boot targets\n" - " 1 - Do not export boot targets (Default)"); + " Set to disable exporting boot targets to sysfs.\n" + "\t\t 0 - Export boot targets\n" + "\t\t 1 - Do not export boot targets (Default)"); int ql4xdontresethba = 0; module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdontresethba, - "Don't reset the HBA for driver recovery \n" - " 0 - It will reset HBA (Default)\n" - " 1 - It will NOT reset HBA"); + " Don't reset the HBA for driver recovery.\n" + "\t\t 0 - It will reset HBA (Default)\n" + "\t\t 1 - It will NOT reset HBA"); -int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */ +int ql4xextended_error_logging; module_param(ql4xextended_error_logging, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xextended_error_logging, - "Option to enable extended error logging, " - "Default is 0 - no logging, 1 - debug logging"); + " Option to enable extended error logging.\n" + "\t\t 0 - no logging (Default)\n" + "\t\t 2 - debug logging"); int ql4xenablemsix = 1; module_param(ql4xenablemsix, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql4xenablemsix, - "Set to enable MSI or MSI-X interrupt mechanism.\n" - " 0 = enable INTx interrupt mechanism.\n" - " 1 = enable MSI-X interrupt mechanism (Default).\n" - " 2 = enable MSI interrupt mechanism."); + " Set to enable MSI or MSI-X interrupt mechanism.\n" + "\t\t 0 = enable INTx interrupt mechanism.\n" + "\t\t 1 = enable MSI-X interrupt mechanism (Default).\n" + "\t\t 2 = enable MSI interrupt mechanism."); #define QL4_DEF_QDEPTH 32 static int ql4xmaxqdepth = QL4_DEF_QDEPTH; module_param(ql4xmaxqdepth, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xmaxqdepth, - "Maximum queue depth to report for target devices.\n" - " Default: 32."); + " Maximum queue depth to report for target devices.\n" + "\t\t Default: 32."); static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO; module_param(ql4xsess_recovery_tmo, int, S_IRUGO); MODULE_PARM_DESC(ql4xsess_recovery_tmo, "Target Session Recovery Timeout.\n" - " Default: 120 sec."); + "\t\t Default: 120 sec."); static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha); /* @@ -1630,7 +1631,9 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, /* Update timers after login */ ddb_entry->default_relogin_timeout = - le16_to_cpu(fw_ddb_entry->def_timeout); + (le16_to_cpu(fw_ddb_entry->def_timeout) > LOGIN_TOV) && + (le16_to_cpu(fw_ddb_entry->def_timeout) < LOGIN_TOV * 10) ? + le16_to_cpu(fw_ddb_entry->def_timeout) : LOGIN_TOV; ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); @@ -1970,6 +1973,42 @@ mem_alloc_error_exit: } /** + * qla4_8xxx_check_temp - Check the ISP82XX temperature. + * @ha: adapter block pointer. + * + * Note: The caller should not hold the idc lock. + **/ +static int qla4_8xxx_check_temp(struct scsi_qla_host *ha) +{ + uint32_t temp, temp_state, temp_val; + int status = QLA_SUCCESS; + + temp = qla4_8xxx_rd_32(ha, CRB_TEMP_STATE); + + temp_state = qla82xx_get_temp_state(temp); + temp_val = qla82xx_get_temp_val(temp); + + if (temp_state == QLA82XX_TEMP_PANIC) { + ql4_printk(KERN_WARNING, ha, "Device temperature %d degrees C" + " exceeds maximum allowed. Hardware has been shut" + " down.\n", temp_val); + status = QLA_ERROR; + } else if (temp_state == QLA82XX_TEMP_WARN) { + if (ha->temperature == QLA82XX_TEMP_NORMAL) + ql4_printk(KERN_WARNING, ha, "Device temperature %d" + " degrees C exceeds operating range." + " Immediate action needed.\n", temp_val); + } else { + if (ha->temperature == QLA82XX_TEMP_WARN) + ql4_printk(KERN_INFO, ha, "Device temperature is" + " now %d degrees C in normal range.\n", + temp_val); + } + ha->temperature = temp_state; + return status; +} + +/** * qla4_8xxx_check_fw_alive - Check firmware health * @ha: Pointer to host adapter structure. * @@ -2040,7 +2079,16 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) test_bit(DPC_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) { dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); - if (dev_state == QLA82XX_DEV_NEED_RESET && + + if (qla4_8xxx_check_temp(ha)) { + ql4_printk(KERN_INFO, ha, "disabling pause" + " transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); + set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags); + qla4xxx_wake_dpc(ha); + } else if (dev_state == QLA82XX_DEV_NEED_RESET && !test_bit(DPC_RESET_HA, &ha->dpc_flags)) { if (!ql4xdontresethba) { ql4_printk(KERN_INFO, ha, "%s: HW State: " @@ -2057,9 +2105,21 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } else { /* Check firmware health */ if (qla4_8xxx_check_fw_alive(ha)) { + ql4_printk(KERN_INFO, ha, "disabling pause" + " transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); halt_status = qla4_8xxx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); + if (LSW(MSB(halt_status)) == 0x67) + ql4_printk(KERN_ERR, ha, "%s:" + " Firmware aborted with" + " error code 0x00006700." + " Device is being reset\n", + __func__); + /* Since we cannot change dev_state in interrupt * context, set appropriate DPC flag then wakeup * DPC */ @@ -2078,7 +2138,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } } -void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) +static void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) { struct iscsi_session *sess; struct ddb_entry *ddb_entry; @@ -3826,16 +3886,14 @@ exit_check: return ret; } -static void qla4xxx_free_nt_list(struct list_head *list_nt) +static void qla4xxx_free_ddb_list(struct list_head *list_ddb) { - struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp; + struct qla_ddb_index *ddb_idx, *ddb_idx_tmp; - /* Free up the normaltargets list */ - list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { - list_del_init(&nt_ddb_idx->list); - vfree(nt_ddb_idx); + list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) { + list_del_init(&ddb_idx->list); + vfree(ddb_idx); } - } static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha, @@ -3884,6 +3942,8 @@ static int qla4xxx_verify_boot_idx(struct scsi_qla_host *ha, uint16_t idx) static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry) { + uint16_t def_timeout; + ddb_entry->ddb_type = FLASH_DDB; ddb_entry->fw_ddb_index = INVALID_ENTRY; ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; @@ -3894,9 +3954,10 @@ static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); atomic_set(&ddb_entry->relogin_timer, 0); atomic_set(&ddb_entry->relogin_retry_count, 0); - + def_timeout = le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); ddb_entry->default_relogin_timeout = - le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); + (def_timeout > LOGIN_TOV) && (def_timeout < LOGIN_TOV * 10) ? + def_timeout : LOGIN_TOV; ddb_entry->default_time2wait = le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait); } @@ -3934,7 +3995,6 @@ static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) ip_state == IP_ADDRSTATE_DEPRICATED || ip_state == IP_ADDRSTATE_DISABLING) ip_idx[idx] = -1; - } /* Break if all IP states checked */ @@ -3947,58 +4007,37 @@ static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) } while (time_after(wtime, jiffies)); } -void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) +static void qla4xxx_build_st_list(struct scsi_qla_host *ha, + struct list_head *list_st) { + struct qla_ddb_index *st_ddb_idx; int max_ddbs; + int fw_idx_size; + struct dev_db_entry *fw_ddb_entry; + dma_addr_t fw_ddb_dma; int ret; uint32_t idx = 0, next_idx = 0; uint32_t state = 0, conn_err = 0; - uint16_t conn_id; - struct dev_db_entry *fw_ddb_entry; - struct ddb_entry *ddb_entry = NULL; - dma_addr_t fw_ddb_dma; - struct iscsi_cls_session *cls_sess; - struct iscsi_session *sess; - struct iscsi_cls_conn *cls_conn; - struct iscsi_endpoint *ep; - uint16_t cmds_max = 32, tmo = 0; - uint32_t initial_cmdsn = 0; - struct list_head list_st, list_nt; /* List of sendtargets */ - struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp; - int fw_idx_size; - unsigned long wtime; - struct qla_ddb_index *nt_ddb_idx; - - if (!test_bit(AF_LINK_UP, &ha->flags)) { - set_bit(AF_BUILD_DDB_LIST, &ha->flags); - ha->is_reset = is_reset; - return; - } - max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : - MAX_DEV_DB_ENTRIES; + uint16_t conn_id = 0; fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, &fw_ddb_dma); if (fw_ddb_entry == NULL) { DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); - goto exit_ddb_list; + goto exit_st_list; } - INIT_LIST_HEAD(&list_st); - INIT_LIST_HEAD(&list_nt); + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; fw_idx_size = sizeof(struct qla_ddb_index); for (idx = 0; idx < max_ddbs; idx = next_idx) { - ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, - fw_ddb_dma, NULL, - &next_idx, &state, &conn_err, - NULL, &conn_id); + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma, + NULL, &next_idx, &state, + &conn_err, NULL, &conn_id); if (ret == QLA_ERROR) break; - if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) - goto continue_next_st; - /* Check if ST, add to the list_st */ if (strlen((char *) fw_ddb_entry->iscsi_name) != 0) goto continue_next_st; @@ -4009,59 +4048,155 @@ void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) st_ddb_idx->fw_ddb_idx = idx; - list_add_tail(&st_ddb_idx->list, &list_st); + list_add_tail(&st_ddb_idx->list, list_st); continue_next_st: if (next_idx == 0) break; } - /* Before issuing conn open mbox, ensure all IPs states are configured - * Note, conn open fails if IPs are not configured +exit_st_list: + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + +/** + * qla4xxx_remove_failed_ddb - Remove inactive or failed ddb from list + * @ha: pointer to adapter structure + * @list_ddb: List from which failed ddb to be removed + * + * Iterate over the list of DDBs and find and remove DDBs that are either in + * no connection active state or failed state + **/ +static void qla4xxx_remove_failed_ddb(struct scsi_qla_host *ha, + struct list_head *list_ddb) +{ + struct qla_ddb_index *ddb_idx, *ddb_idx_tmp; + uint32_t next_idx = 0; + uint32_t state = 0, conn_err = 0; + int ret; + + list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) { + ret = qla4xxx_get_fwddb_entry(ha, ddb_idx->fw_ddb_idx, + NULL, 0, NULL, &next_idx, &state, + &conn_err, NULL, NULL); + if (ret == QLA_ERROR) + continue; + + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + list_del_init(&ddb_idx->list); + vfree(ddb_idx); + } + } +} + +static int qla4xxx_sess_conn_setup(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry, + int is_reset) +{ + struct iscsi_cls_session *cls_sess; + struct iscsi_session *sess; + struct iscsi_cls_conn *cls_conn; + struct iscsi_endpoint *ep; + uint16_t cmds_max = 32; + uint16_t conn_id = 0; + uint32_t initial_cmdsn = 0; + int ret = QLA_SUCCESS; + + struct ddb_entry *ddb_entry = NULL; + + /* Create session object, with INVALID_ENTRY, + * the targer_id would get set when we issue the login */ - qla4xxx_wait_for_ip_configuration(ha); + cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, ha->host, + cmds_max, sizeof(struct ddb_entry), + sizeof(struct ql4_task_data), + initial_cmdsn, INVALID_ENTRY); + if (!cls_sess) { + ret = QLA_ERROR; + goto exit_setup; + } - /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ - list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { - qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); + /* + * so calling module_put function to decrement the + * reference count. + **/ + module_put(qla4xxx_iscsi_transport.owner); + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ddb_entry->sess = cls_sess; + + cls_sess->recovery_tmo = ql4xsess_recovery_tmo; + memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, + sizeof(struct dev_db_entry)); + + qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); + + cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), conn_id); + + if (!cls_conn) { + ret = QLA_ERROR; + goto exit_setup; } - /* Wait to ensure all sendtargets are done for min 12 sec wait */ - tmo = ((ha->def_timeout < LOGIN_TOV) ? LOGIN_TOV : ha->def_timeout); - DEBUG2(ql4_printk(KERN_INFO, ha, - "Default time to wait for build ddb %d\n", tmo)); + ddb_entry->conn = cls_conn; - wtime = jiffies + (HZ * tmo); - do { - list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, - list) { - ret = qla4xxx_get_fwddb_entry(ha, - st_ddb_idx->fw_ddb_idx, - NULL, 0, NULL, &next_idx, - &state, &conn_err, NULL, - NULL); - if (ret == QLA_ERROR) - continue; + /* Setup ep, for displaying attributes in sysfs */ + ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); + if (ep) { + ep->conn = cls_conn; + cls_conn->ep = ep; + } else { + DEBUG2(ql4_printk(KERN_ERR, ha, "Unable to get ep\n")); + ret = QLA_ERROR; + goto exit_setup; + } - if (state == DDB_DS_NO_CONNECTION_ACTIVE || - state == DDB_DS_SESSION_FAILED) { - list_del_init(&st_ddb_idx->list); - vfree(st_ddb_idx); - } - } - schedule_timeout_uninterruptible(HZ / 10); - } while (time_after(wtime, jiffies)); + /* Update sess/conn params */ + qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn); - /* Free up the sendtargets list */ - list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { - list_del_init(&st_ddb_idx->list); - vfree(st_ddb_idx); + if (is_reset == RESET_ADAPTER) { + iscsi_block_session(cls_sess); + /* Use the relogin path to discover new devices + * by short-circuting the logic of setting + * timer to relogin - instead set the flags + * to initiate login right away. + */ + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + set_bit(DF_RELOGIN, &ddb_entry->flags); } +exit_setup: + return ret; +} + +static void qla4xxx_build_nt_list(struct scsi_qla_host *ha, + struct list_head *list_nt, int is_reset) +{ + struct dev_db_entry *fw_ddb_entry; + dma_addr_t fw_ddb_dma; + int max_ddbs; + int fw_idx_size; + int ret; + uint32_t idx = 0, next_idx = 0; + uint32_t state = 0, conn_err = 0; + uint16_t conn_id = 0; + struct qla_ddb_index *nt_ddb_idx; + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_nt_list; + } + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + fw_idx_size = sizeof(struct qla_ddb_index); + for (idx = 0; idx < max_ddbs; idx = next_idx) { - ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, - fw_ddb_dma, NULL, - &next_idx, &state, &conn_err, - NULL, &conn_id); + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma, + NULL, &next_idx, &state, + &conn_err, NULL, &conn_id); if (ret == QLA_ERROR) break; @@ -4072,107 +4207,113 @@ continue_next_st: if (strlen((char *) fw_ddb_entry->iscsi_name) == 0) goto continue_next_nt; - if (state == DDB_DS_NO_CONNECTION_ACTIVE || - state == DDB_DS_SESSION_FAILED) { - DEBUG2(ql4_printk(KERN_INFO, ha, - "Adding DDB to session = 0x%x\n", - idx)); - if (is_reset == INIT_ADAPTER) { - nt_ddb_idx = vmalloc(fw_idx_size); - if (!nt_ddb_idx) - break; - - nt_ddb_idx->fw_ddb_idx = idx; - - memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, - sizeof(struct dev_db_entry)); - - if (qla4xxx_is_flash_ddb_exists(ha, &list_nt, - fw_ddb_entry) == QLA_SUCCESS) { - vfree(nt_ddb_idx); - goto continue_next_nt; - } - list_add_tail(&nt_ddb_idx->list, &list_nt); - } else if (is_reset == RESET_ADAPTER) { - if (qla4xxx_is_session_exists(ha, - fw_ddb_entry) == QLA_SUCCESS) - goto continue_next_nt; - } + if (!(state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED)) + goto continue_next_nt; - /* Create session object, with INVALID_ENTRY, - * the targer_id would get set when we issue the login - */ - cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, - ha->host, cmds_max, - sizeof(struct ddb_entry), - sizeof(struct ql4_task_data), - initial_cmdsn, INVALID_ENTRY); - if (!cls_sess) - goto exit_ddb_list; + DEBUG2(ql4_printk(KERN_INFO, ha, + "Adding DDB to session = 0x%x\n", idx)); + if (is_reset == INIT_ADAPTER) { + nt_ddb_idx = vmalloc(fw_idx_size); + if (!nt_ddb_idx) + break; - /* - * iscsi_session_setup increments the driver reference - * count which wouldn't let the driver to be unloaded. - * so calling module_put function to decrement the - * reference count. - **/ - module_put(qla4xxx_iscsi_transport.owner); - sess = cls_sess->dd_data; - ddb_entry = sess->dd_data; - ddb_entry->sess = cls_sess; + nt_ddb_idx->fw_ddb_idx = idx; - cls_sess->recovery_tmo = ql4xsess_recovery_tmo; - memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, + memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, sizeof(struct dev_db_entry)); - qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); - - cls_conn = iscsi_conn_setup(cls_sess, - sizeof(struct qla_conn), - conn_id); - if (!cls_conn) - goto exit_ddb_list; - - ddb_entry->conn = cls_conn; - - /* Setup ep, for displaying attributes in sysfs */ - ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); - if (ep) { - ep->conn = cls_conn; - cls_conn->ep = ep; - } else { - DEBUG2(ql4_printk(KERN_ERR, ha, - "Unable to get ep\n")); - } - - /* Update sess/conn params */ - qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, - cls_conn); - - if (is_reset == RESET_ADAPTER) { - iscsi_block_session(cls_sess); - /* Use the relogin path to discover new devices - * by short-circuting the logic of setting - * timer to relogin - instead set the flags - * to initiate login right away. - */ - set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); - set_bit(DF_RELOGIN, &ddb_entry->flags); + if (qla4xxx_is_flash_ddb_exists(ha, list_nt, + fw_ddb_entry) == QLA_SUCCESS) { + vfree(nt_ddb_idx); + goto continue_next_nt; } + list_add_tail(&nt_ddb_idx->list, list_nt); + } else if (is_reset == RESET_ADAPTER) { + if (qla4xxx_is_session_exists(ha, fw_ddb_entry) == + QLA_SUCCESS) + goto continue_next_nt; } + + ret = qla4xxx_sess_conn_setup(ha, fw_ddb_entry, is_reset); + if (ret == QLA_ERROR) + goto exit_nt_list; + continue_next_nt: if (next_idx == 0) break; } -exit_ddb_list: - qla4xxx_free_nt_list(&list_nt); + +exit_nt_list: if (fw_ddb_entry) dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + +/** + * qla4xxx_build_ddb_list - Build ddb list and setup sessions + * @ha: pointer to adapter structure + * @is_reset: Is this init path or reset path + * + * Create a list of sendtargets (st) from firmware DDBs, issue send targets + * using connection open, then create the list of normal targets (nt) + * from firmware DDBs. Based on the list of nt setup session and connection + * objects. + **/ +void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) +{ + uint16_t tmo = 0; + struct list_head list_st, list_nt; + struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp; + unsigned long wtime; + + if (!test_bit(AF_LINK_UP, &ha->flags)) { + set_bit(AF_BUILD_DDB_LIST, &ha->flags); + ha->is_reset = is_reset; + return; + } + + INIT_LIST_HEAD(&list_st); + INIT_LIST_HEAD(&list_nt); + + qla4xxx_build_st_list(ha, &list_st); + + /* Before issuing conn open mbox, ensure all IPs states are configured + * Note, conn open fails if IPs are not configured + */ + qla4xxx_wait_for_ip_configuration(ha); + + /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { + qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); + } + + /* Wait to ensure all sendtargets are done for min 12 sec wait */ + tmo = ((ha->def_timeout > LOGIN_TOV) && + (ha->def_timeout < LOGIN_TOV * 10) ? + ha->def_timeout : LOGIN_TOV); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Default time to wait for build ddb %d\n", tmo)); + + wtime = jiffies + (HZ * tmo); + do { + if (list_empty(&list_st)) + break; + + qla4xxx_remove_failed_ddb(ha, &list_st); + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(wtime, jiffies)); + + /* Free up the sendtargets list */ + qla4xxx_free_ddb_list(&list_st); + + qla4xxx_build_nt_list(ha, &list_nt, is_reset); + + qla4xxx_free_ddb_list(&list_nt); qla4xxx_free_ddb_index(ha); } - /** * qla4xxx_probe_adapter - callback function to probe HBA * @pdev: pointer to pci_dev structure diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 26a3fa34a33..133989b3a9f 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k10" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k12" diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f85cfa6c47b..b2c95dbe9d6 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1316,15 +1316,10 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost, } if (scsi_target_is_busy(starget)) { - if (list_empty(&sdev->starved_entry)) - list_add_tail(&sdev->starved_entry, - &shost->starved_list); + list_move_tail(&sdev->starved_entry, &shost->starved_list); return 0; } - /* We're OK to process the command, so we can't be starved */ - if (!list_empty(&sdev->starved_entry)) - list_del_init(&sdev->starved_entry); return 1; } diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 1b214910b71..f59d4a05ecd 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3048,7 +3048,8 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) spin_lock_irqsave(shost->host_lock, flags); rport->flags &= ~(FC_RPORT_FAST_FAIL_TIMEDOUT | - FC_RPORT_DEVLOSS_PENDING); + FC_RPORT_DEVLOSS_PENDING | + FC_RPORT_DEVLOSS_CALLBK_DONE); spin_unlock_irqrestore(shost->host_lock, flags); /* ensure any stgt delete functions are done */ diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 02d99982a74..eacd46bb36b 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2368,16 +2368,15 @@ static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer, size_t count, loff_t *off) { - int num; - char buff[11]; + int err; + unsigned long num; if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) return -EACCES; - num = (count < 10) ? count : 10; - if (copy_from_user(buff, buffer, num)) - return -EFAULT; - buff[num] = '\0'; - sg_allow_dio = simple_strtoul(buff, NULL, 10) ? 1 : 0; + err = kstrtoul_from_user(buffer, count, 0, &num); + if (err) + return err; + sg_allow_dio = num ? 1 : 0; return count; } @@ -2390,17 +2389,15 @@ static ssize_t sg_proc_write_dressz(struct file *filp, const char __user *buffer, size_t count, loff_t *off) { - int num; + int err; unsigned long k = ULONG_MAX; - char buff[11]; if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) return -EACCES; - num = (count < 10) ? count : 10; - if (copy_from_user(buff, buffer, num)) - return -EFAULT; - buff[num] = '\0'; - k = simple_strtoul(buff, NULL, 10); + + err = kstrtoul_from_user(buffer, count, 0, &k); + if (err) + return err; if (k <= 1048576) { /* limit "big buff" to 1 MB */ sg_big_buff = k; return count; diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index b4543f575f4..36d1ed7817e 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -839,6 +839,10 @@ static void sym53c8xx_slave_destroy(struct scsi_device *sdev) struct sym_lcb *lp = sym_lp(tp, sdev->lun); unsigned long flags; + /* if slave_alloc returned before allocating a sym_lcb, return */ + if (!lp) + return; + spin_lock_irqsave(np->s.host->host_lock, flags); if (lp->busy_itlq || lp->busy_itl) { diff --git a/firmware/Makefile b/firmware/Makefile index 5f43bfba3c7..0d15a3d113a 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -82,7 +82,6 @@ fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin -fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \ qlogic/12160.bin fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex deleted file mode 100644 index 2e661957007..00000000000 --- a/firmware/isci/isci_firmware.bin.ihex +++ /dev/null @@ -1,16 +0,0 @@ -:10000000495343554F454D42E80018100002000087 -:1000100000000000000000000101000000000000DE -:10002000FFFFCF5F0100000008DD0B0000FC0F00A8 -:10003000097C0B006EFC0A00FFFFCF5F010000008F -:1000400008DD0B0000FC0F00097C0B006EFC0A00B1 -:10005000FFFFCF5F0100000008DD0B0000FC0F0078 -:10006000097C0B006EFC0A00FFFFCF5F010000005F -:1000700008DD0B0000FC0F00097C0B006EFC0A0081 -:100080000101000000000000FFFFCF5F0200000040 -:1000900008DD0B0000FC0F00097C0B006EFC0A0061 -:1000A000FFFFCF5F0200000008DD0B0000FC0F0027 -:1000B000097C0B006EFC0A00FFFFCF5F020000000E -:1000C00008DD0B0000FC0F00097C0B006EFC0A0031 -:1000D000FFFFCF5F0200000008DD0B0000FC0F00F7 -:0800E000097C0B006EFC0A0014 -:00000001FF diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 5d1a758e059..6a3922fe0be 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -857,7 +857,7 @@ struct fc_lport { enum fc_lport_state state; unsigned long boot_time; struct fc_host_statistics host_stats; - struct fcoe_dev_stats *dev_stats; + struct fcoe_dev_stats __percpu *dev_stats; u8 retry_count; /* Fabric information */ |