diff options
40 files changed, 1874 insertions, 6007 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 89757012c7f..936699e4f04 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -886,6 +886,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. disable) power_save_controller - Reset HD-audio controller in power-saving mode (default = on) + align_buffer_size - Force rounding of buffer/period sizes to multiples + of 128 bytes. This is more efficient in terms of memory + access but isn't required by the HDA spec and prevents + users from specifying exact period/buffer sizes. + (default = on) + snoop - Enable/disable snooping (default = on) This module supports multiple cards and autoprobe. diff --git a/Documentation/sound/alsa/HD-Audio-Controls.txt b/Documentation/sound/alsa/HD-Audio-Controls.txt index 1482035243e..e9621e349e1 100644 --- a/Documentation/sound/alsa/HD-Audio-Controls.txt +++ b/Documentation/sound/alsa/HD-Audio-Controls.txt @@ -98,3 +98,19 @@ Conexant codecs * Auto-Mute Mode See Reatek codecs. + + +Analog codecs +-------------- + +* Channel Mode + This is an enum control to change the surround-channel setup, + appears only when the surround channels are available. + It gives the number of channels to be used, "2ch", "4ch" and "6ch". + According to the configuration, this also controls the + jack-retasking of multi-I/O jacks. + +* Independent HP + When this enum control is enabled, the headphone output is routed + from an individual stream (the third PCM such as hw:0,2) instead of + the primary stream. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index d70c93bdcad..4f3443230d8 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -29,9 +29,6 @@ ALC880 ALC260 ====== - hp HP machines - hp-3013 HP machines (3013-variant) - hp-dc7600 HP DC7600 fujitsu Fujitsu S7020 acer Acer TravelMate will Will laptops (PB V7900) @@ -46,15 +43,10 @@ ALC260 ALC262 ====== fujitsu Fujitsu Laptop - hp-bpc HP xw4400/6400/8400/9400 laptops - hp-bpc-d7000 HP BPC D7000 - hp-tc-t5735 HP Thin Client T5735 - hp-rp5700 HP RP5700 benq Benq ED8 benq-t31 Benq T31 hippo Hippo (ATI) with jack detection, Sony UX-90s hippo_1 Hippo (Benq) with jack detection - sony-assamd Sony ASSAMD toshiba-s06 Toshiba S06 toshiba-rx1 Toshiba RX1 tyan Tyan Thunder n6650W (S2915-E) @@ -66,43 +58,15 @@ ALC262 ALC267/268 ========== - quanta-il1 Quanta IL1 mini-notebook - 3stack 3-stack model - toshiba Toshiba A205 - acer Acer laptops - acer-dmic Acer laptops with digital-mic - acer-aspire Acer Aspire One - dell Dell OEM laptops (Vostro 1200) - zepto Zepto laptops - test for testing/debugging purpose, almost all controls can - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) + N/A ALC269 ====== - basic Basic preset - quanta Quanta FL1 laptop-amic Laptops with analog-mic input laptop-dmic Laptops with digital-mic input - fujitsu FSC Amilo - lifebook Fujitsu Lifebook S6420 - auto auto-config reading BIOS (default) ALC662/663/272 ============== - 3stack-dig 3-stack (2-channel) with SPDIF - 3stack-6ch 3-stack (6-channel) - 3stack-6ch-dig 3-stack (6-channel) with SPDIF - 5stack-dig 5-stack with SPDIF - lenovo-101e Lenovo laptop - eeepc-p701 ASUS Eeepc P701 - eeepc-ep20 ASUS Eeepc EP20 - ecs ECS/Foxconn mobo - m51va ASUS M51VA - g71v ASUS G71V - h13 ASUS H13 - g50v ASUS G50V asus-mode1 ASUS asus-mode2 ASUS asus-mode3 ASUS @@ -111,15 +75,10 @@ ALC662/663/272 asus-mode6 ASUS asus-mode7 ASUS asus-mode8 ASUS - dell Dell with ALC272 - dell-zm1 Dell ZM1 with ALC272 - samsung-nc10 Samsung NC10 mini notebook - auto auto-config reading BIOS (default) ALC680 ====== - base Base model (ASUS NX90) - auto auto-config reading BIOS (default) + N/A ALC882/883/885/888/889 ====================== @@ -175,28 +134,11 @@ ALC882/883/885/888/889 ALC861/660 ========== - 3stack 3-jack - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack with SPDIF I/O - 3stack-660 3-jack (for ALC660) - uniwill-m31 Uniwill M31 laptop - toshiba Toshiba laptop support - asus Asus laptop support - asus-laptop ASUS F2/F3 laptops - auto auto-config reading BIOS (default) + N/A ALC861VD/660VD ============== - 3stack 3-jack - 3stack-dig 3-jack with SPDIF OUT - 6stack-dig 6-jack with SPDIF OUT - 3stack-660 3-jack (for ALC660VD) - 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) - lenovo Lenovo 3000 C200 - dallas Dallas laptops - hp HP TX1000 - asus-v1s ASUS V1Sn - auto auto-config reading BIOS (default) + N/A CMI9880 ======= @@ -289,7 +231,6 @@ Conexant 5051 hp-dv6736 HP dv6736 hp-f700 HP Compaq Presario F700 ideapad Lenovo IdeaPad laptop - lenovo-x200 Lenovo X200 laptop toshiba Toshiba Satellite M300 Conexant 5066 diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index c82beb00763..03e2771ddee 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -447,7 +447,10 @@ The file needs to have a line `[codec]`. The next line should contain three numbers indicating the codec vendor-id (0x12345678 in the example), the codec subsystem-id (0xabcd1234) and the address (2) of the codec. The rest patch entries are applied to this specified codec -until another codec entry is given. +until another codec entry is given. Passing 0 or a negative number to +the first or the second value will make the check of the corresponding +field be skipped. It'll be useful for really broken devices that don't +initialize SSID properly. The `[model]` line allows to change the model name of the each codec. In the example above, it will be changed to model=auto. @@ -491,7 +494,7 @@ Also, the codec chip name can be rewritten via `[chip_name]` line. The hd-audio driver reads the file via request_firmware(). Thus, a patch file has to be located on the appropriate firmware path, typically, /lib/firmware. For example, when you pass the option -`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be +`patch=hda-init.fw`, the file /lib/firmware/hda-init.fw must be present. The patch module option is specific to each card instance, and you @@ -524,6 +527,54 @@ power-saving. See /sys/module/snd_hda_intel/parameters/power_save to check the current value. If it's non-zero, the feature is turned on. +Tracepoints +~~~~~~~~~~~ +The hd-audio driver gives a few basic tracepoints. +`hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response` +traces the response from RIRB (only when read from the codec driver). +`hda:hda_bus_reset` traces the bus-reset due to fatal error, etc, +`hda:hda_unsol_event` traces the unsolicited events, and +`hda:hda_power_down` and `hda:hda_power_up` trace the power down/up +via power-saving behavior. + +Enabling all tracepoints can be done like +------------------------------------------------------------------------ + # echo 1 > /sys/kernel/debug/tracing/events/hda/enable +------------------------------------------------------------------------ +then after some commands, you can traces from +/sys/kernel/debug/tracing/trace file. For example, when you want to +trace what codec command is sent, enable the tracepoint like: +------------------------------------------------------------------------ + # cat /sys/kernel/debug/tracing/trace + # tracer: nop + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + <...>-7807 [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019 + <...>-7807 [002] 105147.774893: hda_send_cmd: [0:0] val=e39019 + <...>-7807 [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a + <...>-7807 [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a + <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019 + <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019 + <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a + <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a +------------------------------------------------------------------------ +Here `[0:0]` indicates the card number and the codec address, and +`val` shows the value sent to the codec, respectively. The value is +a packed value, and you can decode it via hda-decode-verb program +included in hda-emu package below. For example, the value e3a019 is +to set the left output-amp value to 25. +------------------------------------------------------------------------ + % hda-decode-verb 0xe3a019 + raw value = 0x00e3a019 + cid = 0, nid = 0x0e, verb = 0x3a0, parm = 0x19 + raw value: verb = 0x3a0, parm = 0x19 + verbname = set_amp_gain_mute + amp raw val = 0xa019 + output, left, idx=0, mute=0, val=25 +------------------------------------------------------------------------ + + Development Tree ~~~~~~~~~~~~~~~~ The latest development codes for HD-audio are found on sound git tree: diff --git a/include/linux/input.h b/include/linux/input.h index a637e781433..a514fb8faea 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -814,6 +814,7 @@ struct input_keymap_entry { #define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ #define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ #define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ +#define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) diff --git a/include/sound/jack.h b/include/sound/jack.h index c140fc7cbd3..63c790742db 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -42,6 +42,7 @@ enum snd_jack_types { SND_JACK_MECHANICAL = 0x0008, /* If detected separately */ SND_JACK_VIDEOOUT = 0x0010, SND_JACK_AVOUT = SND_JACK_LINEOUT | SND_JACK_VIDEOOUT, + SND_JACK_LINEIN = 0x0020, /* Kept separate from switches to facilitate implementation */ SND_JACK_BTN_0 = 0x4000, diff --git a/include/sound/pcm.h b/include/sound/pcm.h index dc36f756fe8..3e7fda6e816 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -1037,6 +1037,8 @@ static inline void snd_pcm_mmap_data_close(struct vm_area_struct *area) atomic_dec(&substream->mmap_count); } +int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *area); /* mmap for io-memory area */ #if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_ALPHA) #define SNDRV_PCM_INFO_MMAP_IOMEM SNDRV_PCM_INFO_MMAP diff --git a/sound/core/jack.c b/sound/core/jack.c index 53b53e97c89..240a3e13470 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -30,6 +30,7 @@ static int jack_switch_types[] = { SW_LINEOUT_INSERT, SW_JACK_PHYSICAL_INSERT, SW_VIDEOOUT_INSERT, + SW_LINEIN_INSERT, }; static int snd_jack_dev_free(struct snd_device *device) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 2d3af5df88d..77d7df22e7c 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3150,8 +3150,8 @@ static const struct vm_operations_struct snd_pcm_vm_ops_data_fault = { /* * mmap the DMA buffer on RAM */ -static int snd_pcm_default_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *area) +int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *area) { area->vm_flags |= VM_RESERVED; #ifdef ARCH_HAS_DMA_MMAP_COHERENT @@ -3171,6 +3171,7 @@ static int snd_pcm_default_mmap(struct snd_pcm_substream *substream, area->vm_ops = &snd_pcm_vm_ops_data_fault; return 0; } +EXPORT_SYMBOL_GPL(snd_pcm_lib_default_mmap); /* * mmap the DMA buffer on I/O memory area @@ -3236,7 +3237,7 @@ int snd_pcm_mmap_data(struct snd_pcm_substream *substream, struct file *file, if (substream->ops->mmap) err = substream->ops->mmap(substream, area); else - err = snd_pcm_default_mmap(substream, area); + err = snd_pcm_lib_default_mmap(substream, area); if (!err) atomic_inc(&substream->mmap_count); return err; diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 87365d5ea2a..f928d663472 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -6,6 +6,9 @@ snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o +# for trace-points +CFLAGS_hda_codec.o := -I$(src) + snd-hda-codec-realtek-objs := patch_realtek.o snd-hda-codec-cmedia-objs := patch_cmedia.o snd-hda-codec-analog-objs := patch_analog.o diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c index 21ec2cb100b..3b5170b9700 100644 --- a/sound/pci/hda/alc260_quirks.c +++ b/sound/pci/hda/alc260_quirks.c @@ -7,9 +7,6 @@ enum { ALC260_AUTO, ALC260_BASIC, - ALC260_HP, - ALC260_HP_DC7600, - ALC260_HP_3013, ALC260_FUJITSU_S702X, ALC260_ACER, ALC260_WILL, @@ -142,8 +139,6 @@ static const struct hda_channel_mode alc260_modes[1] = { /* Mixer combinations * * basic: base_output + input + pc_beep + capture - * HP: base_output + input + capture_alt - * HP_3013: hp_3013 + input + capture * fujitsu: fujitsu + capture * acer: acer + capture */ @@ -170,145 +165,6 @@ static const struct snd_kcontrol_new alc260_input_mixer[] = { { } /* end */ }; -/* update HP, line and mono out pins according to the master switch */ -static void alc260_hp_master_update(struct hda_codec *codec) -{ - update_speakers(codec); -} - -static int alc260_hp_master_sw_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct alc_spec *spec = codec->spec; - *ucontrol->value.integer.value = !spec->master_mute; - return 0; -} - -static int alc260_hp_master_sw_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct alc_spec *spec = codec->spec; - int val = !*ucontrol->value.integer.value; - - if (val == spec->master_mute) - return 0; - spec->master_mute = val; - alc260_hp_master_update(codec); - return 1; -} - -static const struct snd_kcontrol_new alc260_hp_output_mixer[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .subdevice = HDA_SUBDEV_NID_FLAG | 0x11, - .info = snd_ctl_boolean_mono_info, - .get = alc260_hp_master_sw_get, - .put = alc260_hp_master_sw_put, - }, - HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), - HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, - HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT), - { } /* end */ -}; - -static const struct hda_verb alc260_hp_unsol_verbs[] = { - {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {}, -}; - -static void alc260_hp_setup(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - - spec->autocfg.hp_pins[0] = 0x0f; - spec->autocfg.speaker_pins[0] = 0x10; - spec->autocfg.speaker_pins[1] = 0x11; - spec->automute = 1; - spec->automute_mode = ALC_AUTOMUTE_PIN; -} - -static const struct snd_kcontrol_new alc260_hp_3013_mixer[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Master Playback Switch", - .subdevice = HDA_SUBDEV_NID_FLAG | 0x11, - .info = snd_ctl_boolean_mono_info, - .get = alc260_hp_master_sw_get, - .put = alc260_hp_master_sw_put, - }, - HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT), - HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT), - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT), - { } /* end */ -}; - -static void alc260_hp_3013_setup(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - - spec->autocfg.hp_pins[0] = 0x15; - spec->autocfg.speaker_pins[0] = 0x10; - spec->autocfg.speaker_pins[1] = 0x11; - spec->automute = 1; - spec->automute_mode = ALC_AUTOMUTE_PIN; -} - -static const struct hda_bind_ctls alc260_dc7600_bind_master_vol = { - .ops = &snd_hda_bind_vol, - .values = { - HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_OUTPUT), - HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT), - HDA_COMPOSE_AMP_VAL(0x0a, 3, 0, HDA_OUTPUT), - 0 - }, -}; - -static const struct hda_bind_ctls alc260_dc7600_bind_switch = { - .ops = &snd_hda_bind_sw, - .values = { - HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT), - HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT), - 0 - }, -}; - -static const struct snd_kcontrol_new alc260_hp_dc7600_mixer[] = { - HDA_BIND_VOL("Master Playback Volume", &alc260_dc7600_bind_master_vol), - HDA_BIND_SW("LineOut Playback Switch", &alc260_dc7600_bind_switch), - HDA_CODEC_MUTE("Speaker Playback Switch", 0x0f, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT), - { } /* end */ -}; - -static const struct hda_verb alc260_hp_3013_unsol_verbs[] = { - {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {}, -}; - -static void alc260_hp_3012_setup(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - - spec->autocfg.hp_pins[0] = 0x10; - spec->autocfg.speaker_pins[0] = 0x0f; - spec->autocfg.speaker_pins[1] = 0x11; - spec->autocfg.speaker_pins[2] = 0x15; - spec->automute = 1; - spec->automute_mode = ALC_AUTOMUTE_PIN; -} - /* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12, * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10. */ @@ -480,106 +336,6 @@ static const struct hda_verb alc260_init_verbs[] = { { } }; -#if 0 /* should be identical with alc260_init_verbs? */ -static const struct hda_verb alc260_hp_init_verbs[] = { - /* Headphone and output */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, - /* mono output */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, - /* Line In pin widget for input */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, - /* Line-2 pin widget for output */ - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, - /* CD pin widget for input */ - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, - /* unmute amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, - /* set connection select to line in (default select for this ADC) */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* unmute Line-Out mixer amp left and right (volume = 0) */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, - /* mute pin widget amp left and right (no gain on this amp) */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, - /* unmute HP mixer amp left and right (volume = 0) */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, - /* mute pin widget amp left and right (no gain on this amp) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & - * Line In 2 = 0x03 - */ - /* mute analog inputs */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* Unmute Front out path */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, - /* Unmute Headphone out path */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, - /* Unmute Mono out path */ - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, - { } -}; -#endif - -static const struct hda_verb alc260_hp_3013_init_verbs[] = { - /* Line out and output */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, - /* mono output */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, - /* Line In pin widget for input */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, - /* Headphone pin widget for output */ - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, - /* CD pin widget for input */ - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, - /* unmute amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, - /* set connection select to line in (default select for this ADC) */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* unmute Line-Out mixer amp left and right (volume = 0) */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, - /* mute pin widget amp left and right (no gain on this amp) */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, - /* unmute HP mixer amp left and right (volume = 0) */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, - /* mute pin widget amp left and right (no gain on this amp) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & - * Line In 2 = 0x03 - */ - /* mute analog inputs */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* Unmute Front out path */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, - /* Unmute Headphone out path */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, - /* Unmute Mono out path */ - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, - { } -}; - /* Initialisation sequence for ALC260 as configured in Fujitsu S702x * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD * audio = 0x16, internal speaker = 0x10. @@ -1093,9 +849,6 @@ static const struct hda_verb alc260_test_init_verbs[] = { */ static const char * const alc260_models[ALC260_MODEL_LAST] = { [ALC260_BASIC] = "basic", - [ALC260_HP] = "hp", - [ALC260_HP_3013] = "hp-3013", - [ALC260_HP_DC7600] = "hp-dc7600", [ALC260_FUJITSU_S702X] = "fujitsu", [ALC260_ACER] = "acer", [ALC260_WILL] = "will", @@ -1112,15 +865,6 @@ static const struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL), SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), - SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ - SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), - SND_PCI_QUIRK(0x103c, 0x3013, "HP", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x3014, "HP", ALC260_HP), - SND_PCI_QUIRK(0x103c, 0x3015, "HP", ALC260_HP), - SND_PCI_QUIRK(0x103c, 0x3016, "HP", ALC260_HP), SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC), SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC), SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC), @@ -1144,54 +888,6 @@ static const struct alc_config_preset alc260_presets[] = { .channel_mode = alc260_modes, .input_mux = &alc260_capture_source, }, - [ALC260_HP] = { - .mixers = { alc260_hp_output_mixer, - alc260_input_mixer }, - .init_verbs = { alc260_init_verbs, - alc260_hp_unsol_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt), - .adc_nids = alc260_adc_nids_alt, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .input_mux = &alc260_capture_source, - .unsol_event = |