diff options
307 files changed, 4796 insertions, 6799 deletions
diff --git a/Documentation/arm/sunxi/clocks.txt b/Documentation/arm/sunxi/clocks.txt new file mode 100644 index 00000000000..e09a88aa313 --- /dev/null +++ b/Documentation/arm/sunxi/clocks.txt @@ -0,0 +1,56 @@ +Frequently asked questions about the sunxi clock system +======================================================= + +This document contains useful bits of information that people tend to ask +about the sunxi clock system, as well as accompanying ASCII art when adequate. + +Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the + system? + +A: The 24MHz oscillator allows gating to save power. Indeed, if gated + carelessly the system would stop functioning, but with the right + steps, one can gate it and keep the system running. Consider this + simplified suspend example: + + While the system is operational, you would see something like + + 24MHz 32kHz + | + PLL1 + \ + \_ CPU Mux + | + [CPU] + + When you are about to suspend, you switch the CPU Mux to the 32kHz + oscillator: + + 24Mhz 32kHz + | | + PLL1 | + / + CPU Mux _/ + | + [CPU] + + Finally you can gate the main oscillator + + 32kHz + | + | + / + CPU Mux _/ + | + [CPU] + +Q: Were can I learn more about the sunxi clocks? + +A: The linux-sunxi wiki contains a page documenting the clock registers, + you can find it at + + http://linux-sunxi.org/A10/CCM + + The authoritative source for information at this time is the ccmu driver + released by Allwinner, you can find it at + + https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 1943fae014f..4274a546eb5 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw) }; Below is a matrix detailing which clk_ops are mandatory based upon the -hardware capbilities of that clock. A cell marked as "y" means +hardware capabilities of that clock. A cell marked as "y" means mandatory, a cell marked as "n" implies that either including that -callback is invalid or otherwise uneccesary. Empty cells are either +callback is invalid or otherwise unnecessary. Empty cells are either optional or must be evaluated on a case-by-case basis. clock hardware characteristics diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt new file mode 100644 index 00000000000..028b493e97f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt @@ -0,0 +1,22 @@ +Binding for the axi-clkgen clock generator + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "adi,axi-clkgen". +- #clock-cells : from common clock binding; Should always be set to 0. +- reg : Address and length of the axi-clkgen register set. +- clocks : Phandle and clock specifier for the parent clock. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + clock@0xff000000 { + compatible = "adi,axi-clkgen"; + #clock-cells = <0>; + reg = <0xff000000 0x1000>; + clocks = <&osc 1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt new file mode 100644 index 00000000000..729f52426fe --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -0,0 +1,151 @@ +Device Tree Clock bindings for arch-sunxi + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "allwinner,sun4i-osc-clk" - for a gatable oscillator + "allwinner,sun4i-pll1-clk" - for the main PLL clock + "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock + "allwinner,sun4i-axi-clk" - for the AXI clock + "allwinner,sun4i-axi-gates-clk" - for the AXI gates + "allwinner,sun4i-ahb-clk" - for the AHB clock + "allwinner,sun4i-ahb-gates-clk" - for the AHB gates + "allwinner,sun4i-apb0-clk" - for the APB0 clock + "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates + "allwinner,sun4i-apb1-clk" - for the APB1 clock + "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing + "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates + +Required properties for all clocks: +- reg : shall be the control register address for the clock. +- clocks : shall be the input parent clock(s) phandle for the clock +- #clock-cells : from common clock binding; shall be set to 0 except for + "allwinner,sun4i-*-gates-clk" where it shall be set to 1 + +Additionally, "allwinner,sun4i-*-gates-clk" clocks require: +- clock-output-names : the corresponding gate names that the clock controls + +For example: + +osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clocks = <&osc24M_fixed>; +}; + +pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; +}; + +cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>; +}; + + + +Gate clock outputs + +The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs; +their corresponding offsets as present on sun4i are listed below. Note that +some of these gates are not present on sun5i. + + * AXI gates ("allwinner,sun4i-axi-gates-clk") + + DRAM 0 + + * AHB gates ("allwinner,sun4i-ahb-gates-clk") + + USB0 0 + EHCI0 1 + OHCI0 2* + EHCI1 3 + OHCI1 4* + SS 5 + DMA 6 + BIST 7 + MMC0 8 + MMC1 9 + MMC2 10 + MMC3 11 + MS 12** + NAND 13 + SDRAM 14 + + ACE 16 + EMAC 17 + TS 18 + + SPI0 20 + SPI1 21 + SPI2 22 + SPI3 23 + PATA 24 + SATA 25** + GPS 26* + + VE 32 + TVD 33 + TVE0 34 + TVE1 35 + LCD0 36 + LCD1 37 + + CSI0 40 + CSI1 41 + + HDMI 43 + DE_BE0 44 + DE_BE1 45 + DE_FE0 46 + DE_FE1 47 + + MP 50 + + MALI400 52 + + * APB0 gates ("allwinner,sun4i-apb0-gates-clk") + + CODEC 0 + SPDIF 1* + AC97 2 + IIS 3 + + PIO 5 + IR0 6 + IR1 7 + + KEYPAD 10 + + * APB1 gates ("allwinner,sun4i-apb1-gates-clk") + + I2C0 0 + I2C1 1 + I2C2 2 + + CAN 4 + SCR 5 + PS20 6 + PS21 7 + + UART0 16 + UART1 17 + UART2 18 + UART3 19 + UART4 20 + UART5 21 + UART6 22 + UART7 23 + +Notation: + [*]: The datasheet didn't mention these, but they are present on AW code + [**]: The datasheet had this marked as "NC" but they are used on AW code diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt index 7f9fb85f545..e7f4dc14eff 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt @@ -2,7 +2,7 @@ Allwinner Sunxi Interrupt Controller Required properties: -- compatible : should be "allwinner,sunxi-ic" +- compatible : should be "allwinner,sun4i-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an @@ -97,7 +97,7 @@ The interrupt sources are as follows: Example: intc: interrupt-controller { - compatible = "allwinner,sunxi-ic"; + compatible = "allwinner,sun4i-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt index 0c7b64e95a6..48aeb7884ed 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt @@ -2,7 +2,7 @@ Allwinner A1X SoCs Timer Controller Required properties: -- compatible : should be "allwinner,sunxi-timer" +- compatible : should be "allwinner,sun4i-timer" - reg : Specifies base physical address and size of the registers. - interrupts : The interrupt of the first timer - clocks: phandle to the source clock (usually a 24 MHz fixed clock) @@ -10,7 +10,7 @@ Required properties: Example: timer { - compatible = "allwinner,sunxi-timer"; + compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0x400>; interrupts = <22>; clocks = <&osc>; diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt index 0b271777560..ecd650adff3 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt @@ -1,13 +1,13 @@ -Allwinner sunXi Watchdog timer +Allwinner sun4i Watchdog timer Required properties: -- compatible : should be "allwinner,sunxi-wdt" +- compatible : should be "allwinner,sun4i-wdt" - reg : Specifies base physical address and size of the registers. Example: wdt: watchdog@01c20c90 { - compatible = "allwinner,sunxi-wdt"; + compatible = "allwinner,sun4i-wdt"; reg = <0x01c20c90 0x10>; }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda426a0..32e215fd91e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -410,6 +410,7 @@ config ARCH_GEMINI bool "Cortina Systems Gemini" select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_GPIO_H select CPU_FA526 help Support for the Cortina Systems Gemini family SoCs @@ -473,12 +474,14 @@ config ARCH_MXS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select MULTI_IRQ_HANDLER select PINCTRL select SPARSE_IRQ + select STMP_DEVICE select USE_OF help Support for Freescale MXS-based family of processors @@ -492,14 +495,6 @@ config ARCH_NETX help This enables support for systems based on the Hilscher NetX Soc -config ARCH_H720X - bool "Hynix HMS720x-based" - select ARCH_USES_GETTIMEOFFSET - select CPU_ARM720T - select ISA_DMA_API - help - This enables support for systems based on the Hynix HMS720x - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -1051,8 +1046,6 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-gemini/Kconfig" -source "arch/arm/mach-h720x/Kconfig" - source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" @@ -1173,7 +1166,6 @@ config PLAT_VERSATILE config ARM_TIMER_SP804 bool select CLKSRC_MMIO - select HAVE_SCHED_CLOCK source arch/arm/mm/Kconfig @@ -1603,6 +1595,7 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool depends on SMP + select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit @@ -2163,13 +2156,6 @@ if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_MXC && CPU_FREQ - select CPU_FREQ_TABLE - help - This enables the CPUfreq driver for i.MX CPUs. - config CPU_FREQ_SA1100 bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ee4605f400b..e4d1d23916b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -147,7 +147,6 @@ machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_GEMINI) += gemini -machine-$(CONFIG_ARCH_H720X) += h720x machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 56afcf41aae..ad2d79324cd 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -295,6 +295,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx23-digctl"; reg = <0x8001c000 2000>; status = "disabled"; }; @@ -321,6 +322,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -360,7 +362,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; + compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -426,6 +428,7 @@ compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <28 29 30 31>; + clocks = <&clks 28>; }; auart0: serial@8006c000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7ba49662b9b..64af2381c1b 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -647,6 +647,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx28-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; @@ -676,6 +677,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -755,7 +757,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; + compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -838,6 +840,7 @@ compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; + clocks = <&clks 26>; }; auart0: serial@8006a000 { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 1dfaf2874c5..e4ddeddcd43 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -99,7 +99,7 @@ }; pmc { - compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 44416209004..cb73e62d61a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -444,7 +444,7 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ }; sound { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 61d027f0361..1f79c0debb0 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -437,7 +437,7 @@ sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ bus-width = <4>; @@ -445,7 +445,7 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <8>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 54d6fce00a5..9db36da8e02 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -436,7 +436,7 @@ sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 37b3a57ec0f..715a8b8dd9c 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -584,7 +584,7 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 4766abae7a7..6e9d91fc619 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -465,7 +465,7 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ bus-width = <4>; status = "okay"; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 5d79e4fc49a..98f3e44f2a5 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -325,7 +325,7 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ wp-gpios = <&gpio 122 0>; /* gpio PP2 */ bus-width = <4>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 425c89000c2..4aef56f2d96 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -520,7 +520,7 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ea57c0f6dcc..5762188c60a 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -510,6 +510,7 @@ sdhci@c8000400 { status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 173 0>; /* gpio PV5 */ bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3d3f64d2111..ad64c8cc9da 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -145,6 +145,7 @@ 0 1 0x04 0 41 0x04 0 42 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -304,6 +305,7 @@ compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 8ff2ff20e4a..0a2cd24df85 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -257,7 +257,7 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 17499272a4e..3e2d21018a5 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -311,7 +311,7 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index dbf46c27256..9491edf1a06 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -148,6 +148,7 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -291,6 +292,7 @@ compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -423,7 +425,7 @@ }; pmc { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; }; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 1ea959019fc..047f2a41530 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y CONFIG_SOC_AT91SAM9N12=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 0ea5d2c97fc..05618eb694f 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y CONFIG_MACH_CPU9260=y CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 3b1881033ad..892e8287ed7 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 606d48f3b8f..5f551b76cb6 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig deleted file mode 100644 index bee94d29655..00000000000 --- a/arch/arm/configs/h7201_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_ARCH_H720X=y -CONFIG_ARCH_H7201=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_EXT2_FS=y -CONFIG_JFFS2_FS=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig deleted file mode 100644 index e16d3f372e2..00000000000 --- a/arch/arm/configs/h7202_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y -CONFIG_ARCH_H720X=y -CONFIG_ARCH_H7202=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,19200" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_H720X=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB_GADGET=m -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_EXT2_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 35c21c375d8..53c15dec7af 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *); void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); +#ifdef CONFIG_MULTI_IRQ_HANDLER +extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +#endif + #endif #endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 18c88302333..2092ee1e130 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -20,11 +20,6 @@ struct seq_file; extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); -#ifdef CONFIG_MULTI_IRQ_HANDLER -extern void (*handle_arch_irq)(struct pt_regs *); -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); -#endif - /* * This is for easy migration, but should be changed in the source */ @@ -35,35 +30,4 @@ do { \ raw_spin_unlock(&desc->lock); \ } while(0) -#ifndef __ASSEMBLY__ -/* - * Entry/exit functions for chained handlers where the primary IRQ chip - * may implement either fasteoi or level-trigger flow control. - */ -static inline void chained_irq_enter(struct irq_chip *chip, - struct irq_desc *desc) -{ - /* FastEOI controllers require no action on entry. */ - if (chip->irq_eoi) - return; - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } -} - -static inline void chained_irq_exit(struct irq_chip *chip, - struct irq_desc *desc) -{ - if (chip->irq_eoi) - chip->irq_eoi(&desc->irq_data); - else - chip->irq_unmask(&desc->irq_data); -} -#endif - #endif diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 0f01f4677bd..7b2899c2f7f 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = { \ int twd_local_timer_register(struct twd_local_timer *); -#ifdef CONFIG_HAVE_ARM_TWD -void twd_local_timer_of_register(void); -#else -static inline void twd_local_timer_of_register(void) -{ -} -#endif - #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8e4ef4c83a7..9723d17b8f3 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -26,6 +26,7 @@ #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/random.h> #include <linux/smp.h> #include <linux/init.h> @@ -114,7 +115,10 @@ EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { - machine_desc->init_irq(); + if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) + irqchip_init(); + else + machine_desc->init_irq(); } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 3f256503748..90525d9d290 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) } #ifdef CONFIG_OF -const static struct of_device_id twd_of_match[] __initconst = { - { .compatible = "arm,cortex-a9-twd-timer", }, - { .compatible = "arm,cortex-a5-twd-timer", }, - { .compatible = "arm,arm11mp-twd-timer", }, - { }, -}; - -void __init twd_local_timer_of_register(void) +static void __init twd_local_timer_of_register(struct device_node *np) { - struct device_node *np; int err; if (!is_smp() || !setup_max_cpus) return; - np = of_find_matching_node(NULL, twd_of_match); - if (!np) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; @@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void) out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); } +CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); #endif diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6071f4c3d65..440682b708f 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,8 +1,5 @@ if ARCH_AT91 -config HAVE_AT91_DATAFLASH_CARD - bool - config HAVE_AT91_DBGU0 bool @@ -93,394 +90,13 @@ config SOC_AT91SAM9N12 help Select this if you are using Atmel's AT91SAM9N12 SoC. -choice - prompt "Atmel AT91 Processor Devices for non DT boards" - -config ARCH_AT91_NONE - bool "None" - -config ARCH_AT91RM9200 - bool "AT91RM9200" - select SOC_AT91RM9200 - -config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" - select SOC_AT91SAM9260 - -config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9263 - bool "AT91SAM9263" - select SOC_AT91SAM9263 - -config ARCH_AT91SAM9RL - bool "AT91SAM9RL" - select SOC_AT91SAM9RL - -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - -config ARCH_AT91SAM9G45 - bool "AT91SAM9G45" - select SOC_AT91SAM9G45 - -config ARCH_AT91X40 - bool "AT91x40" - depends on !MMU - select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - -endchoice - config AT91_PMC_UNIT bool default !ARCH_AT91X40 # ---------------------------------------------------------- -if ARCH_AT91RM9200 - -comment "AT91RM9200 Board Type" - -config MACH_ONEARM - bool "Ajeco 1ARM Single Board Computer" - help - Select this if you are using Ajeco's 1ARM Single Board Computer. - <http://www.ajeco.fi/> - -config ARCH_AT91RM9200DK - bool "Atmel AT91RM9200-DK Development board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-DK Development board. - (Discontinued) - -config MACH_AT91RM9200EK - bool "Atmel AT91RM9200-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> - -config MACH_CSB337 - bool "Cogent CSB337" - help - Select this if you are using Cogent's CSB337 board. - <http://www.cogcomp.com/csb_csb337.htm> - -config MACH_CSB637 - bool "Cogent CSB637" - help - Select this if you are using Cogent's CSB637 board. - <http://www.cogcomp.com/csb_csb637.htm> - -config MACH_CARMEVA - bool "Conitec ARM&EVA" - help - Select this if you are using Conitec's AT91RM9200-MCU-Module. - <http://www.conitec.net/english/linuxboard.php> - -config MACH_ATEB9200 - bool "Embest ATEB9200" - help - Select this if you are using Embest's ATEB9200 board. - <http://www.embedinfo.com/english/product/ATEB9200.asp> - -config MACH_KB9200 - bool "KwikByte KB920x" - help - Select this if you are using KwikByte's KB920x board. - <http://www.kwikbyte.com/KB9202.html> - -config MACH_PICOTUX2XX - bool "picotux 200" - help - Select this if you are using a picotux 200. - <http://www.picotux.com/> - -config MACH_KAFA - bool "Sperry-Sun KAFA board" - help - Select this if you are using Sperry-Sun's KAFA board. - -config MACH_ECBAT91 - bool "emQbit ECB_AT91 SBC" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using emQbit's ECB_AT91 board. - <http://wiki.emqbit.com/free-ecb-at91> - -config MACH_YL9200 - bool "ucDragon YL-9200" - help - Select this if you are using the ucDragon YL-9200 board. - -config MACH_CPUAT91 - bool "Eukrea CPUAT91" - help - Select this if you are using the Eukrea Electromatique's - CPUAT91 board <http://www.eukrea.com/>. - -config MACH_ECO920 - bool "eco920" - help - Select this if you are using the eco920 board - -config MACH_RSI_EWS - bool "RSI Embedded Webserver" - depends on ARCH_AT91RM9200 - help - Select this if you are using RSIs EWS board. -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9260 - -comment "AT91SAM9260 Variants" - -comment "AT91SAM9260 / AT91SAM9XE Board Type" - -config MACH_AT91SAM9260EK - bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> - -config MACH_CAM60 - bool "KwikByte KB9260 (CAM60) board" - help - Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. - <http://www.kwikbyte.com/KB9260.html> - -config MACH_SAM9_L9260 - bool "Olimex SAM9-L9260 board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. - <http://www.olimex.com/dev/sam9-L9260.html> - -config MACH_AFEB9260 - bool "Custom afeb9260 board v1" - help - Select this if you are using custom afeb9260 board based on - open hardware design. Select this for revision 1 of the board. - <svn://194.85.238.22/home/users/george/svn/arm9eb> - <http://groups.google.com/group/arm9fpga-evolution-board> - -config MACH_USB_A9260 - bool "CALAO USB-A9260" - help - Select this if you are using a Calao Systems USB-A9260. - <http://www.calao-systems.com> - -config MACH_QIL_A9260 - bool "CALAO QIL-A9260 board" - help - Select this if you are using a Calao Systems QIL-A9260 Board. - <http://www.calao-systems.com> - -config MACH_CPU9260 - bool "Eukrea CPU9260 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9260 Board <http://www.eukrea.com/> - -config MACH_FLEXIBITY - bool "Flexibity Connect board" - help - Select this if you are using Flexibity Connect board - <http://www.flexibity.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G20 - -comment "AT91SAM9G20 Board Type" - -config MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit - that embeds only one SD/MMC slot. - -config MACH_AT91SAM9G20EK_2MMC - depends on MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and - onwards. - <http://www.atmel.com/tools/SAM9G20-EK.aspx> - -config MACH_CPU9G20 - bool "Eukrea CPU9G20 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board <http://www.eukrea.com/> - -config MACH_ACMENETUSFOXG20 - bool "Acme Systems srl FOX Board G20" - help - Select this if you are using Acme Systems - FOX Board G20 <http://www.acmesystems.it> - -config MACH_PORTUXG20 - bool "taskit PortuxG20" - help - Select this if you are using taskit's PortuxG20. - <http://www.taskit.de/en/> - -config MACH_STAMP9G20 - bool "taskit Stamp9G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on its - evaluation board. - <http://www.taskit.de/en/> - -config MACH_PCONTROL_G20 - bool "PControl G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation - system; featuring nvram, eth-switch, iso-rs485, display, io - -config MACH_GSIA18S - bool "GS_IA18_S board" - help - This enables support for the GS_IA18_S board - produced by GeoSIG Ltd company. This is an internet accelerograph. - <http://www.geosig.com> - -config MACH_USB_A9G20 - bool "CALAO USB-A9G20" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using a Calao Systems USB-A9G20. - <http://www.calao-systems.com> - -endif - -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" - -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G45 - -comment "AT91SAM9G45 Board Type" - -config MACH_AT91SAM9M10G45EK - bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - help - Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. - Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 - families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. - <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91X40 - -comment "AT91X40 Board Type" - -config MACH_AT91EB01 - bool "Atmel AT91EB01 Evaluation Kit" - help - Select this if you are using Atmel's AT91EB01 Evaluation Kit. - It is also a popular target for simulators such as GDB's - ARM simulator (commonly known as the ARMulator) and the - Skyeye simulator. - -endif - -# ---------------------------------------------------------- +source arch/arm/mach-at91/Kconfig.non_dt comment "Generic Board Type" @@ -492,7 +108,7 @@ config MACH_AT91RM9200_DT Select this if you want to experiment device-tree with an Atmel RM9200 Evaluation Kit. -config MACH_AT91SAM_DT +config MACH_AT91SAM9_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" depends on SOC_AT91SAM9 select USE_OF @@ -502,16 +118,6 @@ config MACH_AT91SAM_DT # ---------------------------------------------------------- -comment "AT91 Board Options" - -config MTD_AT91_DATAFLASH_CARD - bool "Enable DataFlash Card support" - depends on HAVE_AT91_DATAFLASH_CARD - help - Enable support for the DataFlash card. - -# ---------------------------------------------------------- - comment "AT91 Feature Selections" config AT91_PROGRAMMABLE_CLOCKS diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt new file mode 100644 index 00000000000..6c24985515a --- /dev/null +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -0,0 +1,399 @@ +menu "Atmel Non-DT world" + +config HAVE_AT91_DATAFLASH_CARD + bool + +choice + prompt "Atmel AT91 Processor Devices for non DT boards" + +config ARCH_AT91_NONE + bool "None" + +config ARCH_AT91RM9200 + bool "AT91RM9200" + select SOC_AT91RM9200 + +config ARCH_AT91SAM9260 + bool "AT91SAM9260 or AT91SAM9XE" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9261 + bool "AT91SAM9261" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9G10 + bool "AT91SAM9G10" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9263 + bool "AT91SAM9263" + select SOC_AT91SAM9263 + +config ARCH_AT91SAM9RL + bool "AT91SAM9RL" + select SOC_AT91SAM9RL + +config ARCH_AT91SAM9G20 + bool "AT91SAM9G20" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9G45 + bool "AT91SAM9G45" + select SOC_AT91SAM9G45 + +config ARCH_AT91X40 + bool "AT91x40" + depends on !MMU + select ARCH_USES_GETTIMEOFFSET + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + +endchoice + +# ---------------------------------------------------------- + +if ARCH_AT91RM9200 + +comment "AT91RM9200 Board Type" + +config MACH_ONEARM + bool "Ajeco 1ARM Single Board Computer" + help + Select this if you are using Ajeco's 1ARM Single Board Computer. + <http://www.ajeco.fi/> + +config ARCH_AT91RM9200DK + bool "Atmel AT91RM9200-DK Development board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-DK Development board. + (Discontinued) + +config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> + +config MACH_CSB337 + bool "Cogent CSB337" + help + Select this if you are using Cogent's CSB337 board. + <http://www.cogcomp.com/csb_csb337.htm> + +config MACH_CSB637 + bool "Cogent CSB637" + help + Select this if you are using Cogent's CSB637 board. + <http://www.cogcomp.com/csb_csb637.htm> + +config MACH_CARMEVA + bool "Conitec ARM&EVA" + help + Select this if you are using Conitec's AT91RM9200-MCU-Module. + <http://www.conitec.net/english/linuxboard.php> + +config MACH_ATEB9200 + bool "Embest ATEB9200" + help + Select this if you are using Embest's ATEB9200 board. + <http://www.embedinfo.com/english/product/ATEB9200.asp> + +config MACH_KB9200 + bool "KwikByte KB920x" + help + Select this if you are using KwikByte's KB920x board. + <http://www.kwikbyte.com/KB9202.html> + +config MACH_PICOTUX2XX + bool "picotux 200" + help + Select this if you are using a picotux 200. + <http://www.picotux.com/> + +config MACH_KAFA + bool "Sperry-Sun KAFA board" + help + Select this if you are using Sperry-Sun's KAFA board. + +config MACH_ECBAT91 + bool "emQbit ECB_AT91 SBC" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using emQbit's ECB_AT91 board. + <http://wiki.emqbit.com/free-ecb-at91> + +config MACH_YL9200 + bool "ucDragon YL-9200" + help + Select this if you are using the ucDragon YL-9200 board. + +config MACH_CPUAT91 + bool "Eukrea CPUAT91" + help + Select this if you are using the Eukrea Electromatique's + CPUAT91 board <http://www.eukrea.com/>. + +config MACH_ECO920 + bool "eco920" + help + Select this if you are using the eco920 board + +config MACH_RSI_EWS + bool "RSI Embedded Webserver" + depends on ARCH_AT91RM9200 + help + Select this if you are using RSIs EWS board. +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9260 + +comment "AT91SAM9260 Variants" + +comment "AT91SAM9260 / AT91SAM9XE Board Type" + +config MACH_AT91SAM9260EK + bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + +config MACH_CAM60 + bool "KwikByte KB9260 (CAM60) board" + help + Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. + <http://www.kwikbyte.com/KB9260.html> + +config MACH_SAM9_L9260 + bool "Olimex SAM9-L9260 board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. + <http://www.olimex.com/dev/sam9-L9260.html> + +config MACH_AFEB9260 + bool "Custom afeb9260 board v1" + help + Select this if you are using custom afeb9260 board based on + open hardware design. Select this for revision 1 of the board. + <svn://194.85.238.22/home/users/george/svn/arm9eb> + <http://groups.google.com/group/arm9fpga-evolution-board> + +config MACH_USB_A9260 + bool "CALAO USB-A9260" + help + Select this if you are using a Calao Systems USB-A9260. + <http://www.calao-systems.com> + +config MACH_QIL_A9260 + bool "CALAO QIL-A9260 board" + help + Select this if you are using a Calao Systems QIL-A9260 Board. + <http://www.calao-systems.com> + +config MACH_CPU9260 + bool "Eukrea CPU9260 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9260 Board <http://www.eukrea.com/> + +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G10 + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +config MACH_USB_A9263 + bool "CALAO USB-A9263" + help + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G20 + +comment "AT91SAM9G20 Board Type" + +config MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + depends on MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. + <http://www.atmel.com/tools/SAM9G20-EK.aspx> + +config MACH_CPU9G20 + bool "Eukrea CPU9G20 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9G20 Board <http://www.eukrea.com/> + +config MACH_ACMENETUSFOXG20 + bool "Acme Systems srl FOX Board G20" + help + Select this if you are using Acme Systems + FOX Board G20 <http://www.acmesystems.it> + +config MACH_PORTUXG20 + bool "taskit PortuxG20" + help + Select this if you are using taskit's PortuxG20. + <http://www.taskit.de/en/> + +config MACH_STAMP9G20 + bool "taskit Stamp9G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on its + evaluation board. + <http://www.taskit.de/en/> + +config MACH_PCONTROL_G20 + bool "PControl G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on this + carrier board, beeing the decentralized unit of a building automation + system; featuring nvram, eth-switch, iso-rs485, display, io + +config MACH_GSIA18S + bool "GS_IA18_S board" + help + This enables support for the GS_IA18_S board + produced by GeoSIG Ltd company. This is an internet accelerograph. + <http://www.geosig.com> + +config MACH_USB_A9G20 + bool "CALAO USB-A9G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Calao Systems USB-A9G20. + <http://www.calao-systems.com> + +endif + +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G45 + +comment "AT91SAM9G45 Board Type" + +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" + help + Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. + Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 + families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. + <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91X40 + +comment "AT91X40 Board Type" + +config MACH_AT91EB01 + bool "Atmel AT91EB01 Evaluation Kit" + help + Select this if you are using Atmel's AT91EB01 Evaluation Kit. + It is also a popular target for simulators such as GDB's + ARM simulator (commonly known as the ARMulator) and the + Skyeye simulator. + +endif + +# ---------------------------------------------------------- + +comment "AT91 Board Options" + +config MTD_AT91_DATAFLASH_CARD + bool "Enable DataFlash Card support" + depends on HAVE_AT91_DATAFLASH_CARD + help + Enable support for the DataFlash card. + +endmenu diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 39218ca6d8e..505fed961eb 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -87,8 +87,8 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree -obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o -obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o +obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h index 875fa336800..a600e699292 100644 --- a/arch/arm/mach-at91/at91_rstc.h +++ b/arch/arm/mach-at91/at91_rstc.h @@ -23,7 +23,7 @@ extern void __iomem *at91_rstc_base; __raw_readl(at91_rstc_base + field) #define at91_rstc_write(field, value) \ - __raw_writel(value, at91_rstc_base + field); + __raw_writel(value, at91_rstc_base + field) #else .extern at91_rstc_base #endif diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h index 60478ea8bd4..9e29f31ec9a 100644 --- a/arch/arm/mach-at91/at91_shdwc.h +++ b/arch/arm/mach-at91/at91_shdwc.h @@ -23,7 +23,7 @@ extern void __iomem *at91_shdwc_base; __raw_readl(at91_shdwc_base + field) #define at91_shdwc_write(field, value) \ - __raw_writel(value, at91_shdwc_base + field); + __raw_writel(value, at91_shdwc_base + field) #endif #define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 0c07a4459cb..2919eba41ff 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -33,7 +33,7 @@ __raw_readl(AT91_IO_P2V(AT91_TC) + field) #define at91_tc_write(field, value) \ - __raw_writel(value, AT91_IO_P2V(AT91_TC) + field); + __raw_writel(value, AT91_IO_P2V(AT91_TC) + field) /* * 3 counter/timer units present. diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3fcb6623a33..3fcb6623a33 100644 --- a/arch/arm/mach-at91/board-rm9200-dt.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt-sam9.c index 8db30132abe..8db30132abe 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt-sam9.c diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index c5d7e1e9d75..a5afcf76550 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -22,10 +22,9 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 2aa0c5e1349..3b5948566e5 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,9 +16,6 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H -#define dbgu_readl(dbgu, field) \ - __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) - #if !defined(CONFIG_ARCH_AT91X40) #define AT91_DBGU_CR (0x00) /* Control Register */ #define AT91_DBGU_MR (0x04) /* Mode Register */ diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h index 02fae9de746..f8996c95413 100644 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91_matrix.h @@ -14,7 +14,7 @@ extern void __iomem *at91_matrix_base; __raw_readl(at91_matrix_base + field) #define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field); + __raw_writel(value, at91_matrix_base + field) #else .extern at91_matrix_base diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h index 969aac27109..67fdbd13c3e 100644 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ b/arch/arm/mach-at91/include/mach/at91_st.h @@ -23,7 +23,7 @@ extern void __iomem *at91_st_base; __raw_readl(at91_st_base + field) #define at91_st_write(field, value) \ - __raw_writel(value, at91_st_base + field); + __raw_writel(value, at91_st_base + field) #else .extern at91_st_base #endif diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 4b678478cf9..9e7c1e1528e 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -333,7 +333,7 @@ static void at91_dt_rstc(void) of_id = of_match_node(rstc_ids, np); if (!of_id) - panic("AT91: rtsc no restart function availlable\n"); + panic("AT91: rtsc no restart function available\n"); arm_pm_restart = of_id->data; @@ -353,7 +353,7 @@ static void at91_dt_ramc(void) np = of_find_matching_node(NULL, ramc_ids); if (!np) - panic("unable to find compatible ram conroller node in dtb\n"); + panic("unable to find compatible ram controller node in dtb\n"); at91_ramc_base[0] = of_iomap(np, 0); if (!at91_ramc_base[0]) @@ -403,7 +403,7 @@ static void at91_dt_shdwc(void) np = of_find_matching_node(NULL, shdwc_ids); if (!np) { - pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n"); + pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n"); return; } @@ -419,7 +419,7 @@ static void at91_dt_shdwc(void) if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { if (reg > AT91_SHDW_CPTWK0_MAX) { - pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n", + pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); reg = AT91_SHDW_CPTWK0_MAX; } diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 70f94c87479..0a6c127f834 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -95,11 +95,6 @@ config EXYNOS4_DEV_AHCI help Compile in platform device definitions for AHCI -config EXYNOS_DEV_DRM - bool - help - Compile in platform device definitions for core DRM device - config EXYNOS4_SETUP_FIMD0 bool help @@ -199,7 +194,6 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC @@ -253,9 +247,7 @@ config MACH_UNIVERSAL_C210 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select HAVE_SCHED_CLOCK select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -294,7 +286,6 @@ config MACH_NURI select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -330,7 +321,6 @@ config MACH_ORIGEN select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC @@ -366,7 +356,6 @@ config MACH_SMDK4212 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC2 @@ -407,7 +396,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CPU_EXYNOS4210 - select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL select PINCTRL_EXYNOS select USE_OF diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7ba..1b0fa7afc7f 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -23,9 +23,9 @@ #include <linux/of_irq.h> #include <linux/export.h> #include <linux/irqdomain.h> -#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/chained_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index 4244d02dafb..d5bc129e6bb 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -12,7 +12,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <mach/irqs.h> #include <mach/map.h> diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 579d2d171da..bf946931ab3 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -26,7 +26,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index d71672922b1..8270929d7b4 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -23,7 +23,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60f7c5be057..95e04bd5813 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -76,13 +75,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index 7355c0bbcb5..7963a77be63 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o idle.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 08bd650c42f..ca8a25bb352 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = ib4220b_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index fa0a36337f4..7a675f88ffd 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -14,6 +14,7 @@ #include <linux/leds.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = rut1xx_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 3321cd6cc1f..418188cd171 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = wbd111_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index fe33c825fda..266b265090c 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = wbd222_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h index 7670c39acb2..38a45260a7c 100644 --- a/arch/arm/mach-gemini/common.h +++ b/arch/arm/mach-gemini/common.h @@ -26,4 +26,6 @@ extern int platform_register_pflash(unsigned int size, struct mtd_partition *parts, unsigned int nr_parts); +extern void gemini_restart(char mode, const char *cmd); + #endif /* __GEMINI_COMMON_H__ */ diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index fdc7ef1391d..70bfa571b24 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -21,6 +21,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/gpio.h> #define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x)) @@ -44,7 +45,7 @@ #define GPIO_PORT_NUM 3 -static void _set_gpio_irqenable(unsigned int base, unsigned int index, +static void _set_gpio_irqenable(void __iomem *base, unsigned int index, int enable) { unsigned int reg; @@ -57,7 +58,7 @@ static void _set_gpio_irqenable(unsigned int base, unsigned int index, static void gpio_ack_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR); } @@ -65,7 +66,7 @@ static void gpio_ack_irq(struct irq_data *d) static void gpio_mask_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); _set_gpio_irqenable(base, gpio % 32, 0); } @@ -73,7 +74,7 @@ static void gpio_mask_irq(struct irq_data *d) static void gpio_unmask_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); _set_gpio_irqenable(base, gpio % 32, 1); } @@ -82,7 +83,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) { unsigned int gpio = irq_to_gpio(d->irq); unsigned int gpio_mask = 1 << (gpio % 32); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); unsigned int reg_both, reg_level, reg_type; reg_type = __raw_readl(base + GPIO_INT_TYPE); @@ -120,7 +121,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) __raw_writel(reg_level, base + GPIO_INT_LEVEL); __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); - gpio_ack_irq(d->irq); + gpio_ack_irq(d); return 0; } @@ -153,7 +154,7 @@ static struct irq_chip gpio_irq_chip = { static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, int dir) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); unsigned int reg; reg = __raw_readl(base + GPIO_DIR); @@ -166,7 +167,7 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); if (value) __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET); @@ -176,7 +177,7 @@ static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1; } diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index 8c950e1d06b..98e7b0f286b 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -69,6 +69,6 @@ /* * macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) +#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) #endif diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 020852d3bdd..30bef116691 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -65,8 +65,8 @@ static struct irq_chip gemini_irq_chip = { static struct resource irq_resource = { .name = "irq_handler", - .start = IO_ADDRESS(GEMINI_INTERRUPT_BASE), - .end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4, + .start = GEMINI_INTERRUPT_BASE, + .end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4, }; void __init gemini_init_irq(void) diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c index 51948242ec0..2c2cd284bb6 100644 --- a/arch/arm/mach-gemini/mm.c +++ b/arch/arm/mach-gemini/mm.c @@ -19,57 +19,57 @@ /* Page table mapping for I/O region */ static struct map_desc gemini_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE), .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_UART_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE), .pfn = __phys_to_pfn(GEMINI_UART_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_TIMER_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE), .pfn = __phys_to_pfn(GEMINI_TIMER_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE), .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE), .length = SZ_512K, .type = MT_DEVICE, diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/reset.c index a33b5a1f8ab..b26659759e2 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/reset.c @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_reset(char mode, const char *cmd) +void gemini_restart(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig deleted file mode 100644 index 6bb755bcb6f..00000000000 --- a/arch/arm/mach-h720x/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -if ARCH_H720X - -menu "h720x Implementations" - -config ARCH_H7201 - bool "gms30c7201" - depends on ARCH_H720X - select CPU_H7201 - select ZONE_DMA - help - Say Y here if you are using the Hynix GMS30C7201 Reference Board - -config ARCH_H7202 - bool "hms30c7202" - depends on ARCH_H720X - select CPU_H7202 - select ZONE_DMA - help - Say Y here if you are using the Hynix HMS30C7202 Reference Board - -endmenu - -config CPU_H7201 - bool - help - Select code specific to h7201 variants - -config CPU_H7202 - bool - help - Select code specific to h7202 variants -config H7202_SERIAL23 - depends on CPU_H7202 - bool "Use serial ports 2+3" - help - Say Y here if you wish to use serial ports 2+3. They share their - pins with the keyboard matrix controller, so you have to decide. - - -endif diff --git a/arch/arm/mach-h720x/Makefile b/arch/arm/mach-h720x/Makefile deleted file mode 100644 index e4cf728948e..00000000000 --- a/arch/arm/mach-h720x/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := common.o -obj-m := -obj-n := -obj- := - -# Specific board support - -obj-$(CONFIG_ARCH_H7201) += h7201-eval.o -obj-$(CONFIG_ARCH_H7202) += h7202-eval.o -obj-$(CONFIG_CPU_H7201) += cpu-h7201.o -obj-$(CONFIG_CPU_H7202) += cpu-h7202.o diff --git a/arch/arm/mach-h720x/Makefile.boot b/arch/arm/mach-h720x/Makefile.boot deleted file mode 100644 index d875a7094df..00000000000 --- a/arch/arm/mach-h720x/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000 - diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c deleted file mode 100644 index 17ef91fa3d5..00000000000 --- a/arch/arm/mach-h720x/common.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/common.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * common stuff for Hynix h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/sched.h> -#include <linux/mman.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/dma.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/system_misc.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <mach/irqs.h> - -#include <asm/mach/dma.h> - -#if 0 -#define IRQDBG(args...) printk(args) -#else -#define IRQDBG(args...) do {} while(0) -#endif - -void __init arch_dma_init(dma_t *dma) -{ -} - -/* - * Return nsecs since last timer reload - * (timercount * (usecs perjiffie)) / (ticks per jiffie) - */ -u32 h720x_gettimeoffset(void) -{ - return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000; -} - -/* - * mask Global irq's - */ -static void mask_global_irq(struct irq_data *d) -{ - CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq); -} - -/* - * unmask Global irq's - */ -static void unmask_global_irq(struct irq_data *d) -{ - CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq); -} - - -/* - * ack GPIO irq's - * Ack only for edge triggered int's valid - */ -static void inline ack_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - if ( (CPU_REG (reg_base, GPIO_EDGE) & bit)) - CPU_REG (reg_base, GPIO_CLR) = bit; -} - -/* - * mask GPIO irq's - */ -static void inline mask_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - CPU_REG (reg_base, GPIO_MASK) &= ~bit; -} - -/* - * unmask GPIO irq's - */ -static void inline unmask_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - CPU_REG (reg_base, GPIO_MASK) |= bit; -} - -static void -h720x_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - IRQDBG("%s irq: %d\n", __func__, irq); - while (mask) { - if (mask & 1) { - IRQDBG("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOA(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOB(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOC(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOD(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -#ifdef CONFIG_CPU_H7202 -static void -h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOE(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} -#endif - -static struct irq_chip h720x_global_chip = { - .irq_ack = mask_global_irq, - .irq_mask = mask_global_irq, - .irq_unmask = unmask_global_irq, -}; - -static struct irq_chip h720x_gpio_chip = { - .irq_ack = ack_gpio_irq, - .irq_mask = mask_gpio_irq, - .irq_unmask = unmask_gpio_irq, -}; - -/* - * Initialize IRQ's, mask all, enable multiplexed irq's - */ -void __init h720x_init_irq (void) -{ - int irq; - - /* Mask global irq's */ - CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0; - - /* Mask all multiplexed irq's */ - CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0; - - /* Initialize global IRQ's, fast path */ - for (irq = 0; irq < NR_GLBL_IRQS; irq++) { - irq_set_chip_and_handler(irq, &h720x_global_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Initialize multiplexed IRQ's, slow path */ - for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) { - irq_set_chip_and_handler(irq, &h720x_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler); - irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler); - irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler); - irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler); - -#ifdef CONFIG_CPU_H7202 - for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) { - irq_set_chip_and_handler(irq, &h720x_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler); -#endif - - /* Enable multiplexed irq's */ - CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX; -} - -static struct map_desc h720x_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -/* Initialize io tables */ -void __init h720x_map_io(void) -{ - iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc)); -} - -void h720x_restart(char mode, const char *cmd) -{ - CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; -} - -static void h720x__idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -static int __init h720x_idle_init(void) -{ - arm_pm_idle = h720x__idle; - return 0; -} - -arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h deleted file mode 100644 index 7e738410ca9..00000000000 --- a/arch/arm/mach-h720x/common.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/common.h - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix GMS30C7201 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -extern u32 h720x_gettimeoffset(void); -extern void __init h720x_init_irq(void); -extern void __init h720x_map_io(void); -extern void h720x_restart(char, const char *); - -#ifdef CONFIG_ARCH_H7202 -extern void h7202_timer_init(void); -extern void __init init_hw_h7202(void); -extern void __init h7202_init_irq(void); -extern void __init h7202_init_time(void); -#endif - -#ifdef CONFIG_ARCH_H7201 -extern void h7201_timer_init(void); -#endif diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c deleted file mode 100644 index 13c74121538..00000000000 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/cpu-h7201.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * processor specific stuff for the Hynix h7201 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include "common.h" -/* - * Timer interrupt handler - */ -static irqreturn_t -h7201_timer_interrupt(int irq, void *dev_id) -{ - CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction h7201_timer_irq = { - .name = "h7201 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = h7201_timer_interrupt, -}; - -/* - * Setup TIMER0 as system timer - */ -void __init h7201_timer_init(void) -{ - arch_gettimeoffset = h720x_gettimeoffset; - - CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT; - - setup_irq(IRQ_TIMER0, &h7201_timer_irq); -} diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c deleted file mode 100644 index e2ae7e898f9..00000000000 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/cpu-h7202.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * processor specific stuff for the Hynix h7202 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include "common.h" - -static struct resource h7202ps2_resources[] = { - [0] = { - .start = 0x8002c000, - .end = 0x8002c040, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PS2, - .end = IRQ_PS2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h7202ps2_device = { - .name = "h7202ps2", - .id = -1, - .num_resources = ARRAY_SIZE(h7202ps2_resources), - .resource = h7202ps2_resources, -}; - -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (void*)SERIAL0_VIRT, - .mapbase = SERIAL0_BASE, - .irq = IRQ_UART0, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .membase = (void*)SERIAL1_VIRT, - .mapbase = SERIAL1_BASE, - .irq = IRQ_UART1, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, -#ifdef CONFIG_H7202_SERIAL23 - { - .membase = (void*)SERIAL2_VIRT, - .mapbase = SERIAL2_BASE, - .irq = IRQ_UART2, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .membase = (void*)SERIAL3_VIRT, - .mapbase = SERIAL3_BASE, - .irq = IRQ_UART3, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, -#endif - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &h7202ps2_device, - &serial_device, -}; - -/* Although we have two interrupt lines for the timers, we only have one - * status register which clears all pending timer interrupts on reading. So - * we have to handle all timer interrupts in one place. - */ -static void -h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); - - if ( mask & TSTAT_T0INT ) { - timer_tick(); - if( mask == TSTAT_T0INT ) - return; - } - - mask >>= 1; - irq = IRQ_TIMER1; - while (mask) { - if (mask & 1) - generic_handle_irq(irq); - irq++; - mask >>= 1; - } -} - -/* - * Timer interrupt handler - */ -static irqreturn_t -h7202_timer_interrupt(int irq, void *dev_id) -{ - h7202_timerx_demux_handler(0, NULL); - return IRQ_HANDLED; -} - -/* - * mask multiplexed timer IRQs - */ -static void inline __mask_timerx_irq(unsigned int irq) -{ - unsigned int bit; - bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1)); - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit; -} - -static void inline mask_timerx_irq(struct irq_data *d) -{ - __mask_timerx_irq(d->irq); -} - -/* - * unmask multiplexed timer IRQs - */ -static void inline unmask_timerx_irq(struct irq_data *d) -{ - unsigned int bit; - bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1)); - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit; -} - -static struct irq_chip h7202_timerx_chip = { - .irq_ack = mask_timerx_irq, - .irq_mask = mask_timerx_irq, - .irq_unmask = unmask_timerx_irq, -}; - -static struct irqaction h7202_timer_irq = { - .name = "h7202 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = h7202_timer_interrupt, -}; - -/* - * Setup TIMER0 as system timer - */ -void __init h7202_timer_init(void) -{ - arch_gettimeoffset = h720x_gettimeoffset; - - CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT; - - setup_irq(IRQ_TIMER0, &h7202_timer_irq); -} - -void __init h7202_init_irq (void) -{ - int irq; - - CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0; - - for (irq = IRQ_TIMER1; - irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) { - __mask_timerx_irq(irq); - irq_set_chip_and_handler(irq, &h7202_timerx_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler); - - h720x_init_irq(); -} - -void __init init_hw_h7202(void) -{ - /* Enable clocks */ - CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE; - - CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; -#ifdef CONFIG_H7202_SERIAL23 - CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 | - AMULSEL_USIN3 | AMULSEL_USOUT3; -#endif - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c deleted file mode 100644 index 4fdeb686c0a..00000000000 --- a/arch/arm/mach-h720x/h7201-eval.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/h7201-eval.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix GMS30C7201 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/device.h> - -#include <asm/setup.h> -#include <asm/types.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <mach/hardware.h> -#include "common.h" - -MACHINE_START(H7201, "Hynix GMS30C7201") - /* Maintainer: Robert Schwebel, Pengutronix */ - .atag_offset = 0x1000, - .map_io = h720x_map_io, - .init_irq = h720x_init_irq, - .init_time = h7201_timer_init, - .dma_zone_size = SZ_256M, - .restart = h720x_restart, -MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c deleted file mode 100644 index f68e967a206..00000000000 --- a/arch/arm/mach-h720x/h7202-eval.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/h7202-eval.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix HMS30C7202 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <asm/setup.h> -#include <asm/types.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include "common.h" - -static struct resource cirrus_resources[] = { - [0] = { - .start = ETH0_PHYS + 0x300, - .end = ETH0_PHYS + 0x300 + 0x10, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CHAINED_GPIOB(8), - .end = IRQ_CHAINED_GPIOB(8), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cirrus_device = { - .name = "cirrus-cs89x0", - .id = -1, - .num_resources = ARRAY_SIZE(cirrus_resources), - .resource = cirrus_resources, -}; - -static struct platform_device *devices[] __initdata = { - &cirrus_device, -}; - -/* - * Hardware init. This is called early in initcalls - * Place pin inits here. So you avoid adding ugly - * #ifdef stuff to common drivers. - * Use this only, if your bootloader is not able - * to initialize the pins proper. - */ -static void __init init_eval_h7202(void) -{ - init_hw_h7202(); - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); - - /* Enable interrupt on portb bit 8 (ethernet) */ - CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8); - CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8); -} - -MACHINE_START(H7202, "Hynix HMS30C7202") - /* Maintainer: Robert Schwebel, Pengutronix */ - .atag_offset = 0x100, - .map_io = h720x_map_io, - .init_irq = h7202_init_irq, - .init_time = h7202_timer_init, - .init_machine = init_eval_h7202, - .dma_zone_size = SZ_256M, - .restart = h720x_restart, -MACHINE_END diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h deleted file mode 100644 index 38b8e0d61fb..00000000000 --- a/arch/arm/mach-h720x/include/mach/boards.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/boards.h - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * - * This file contains the board specific defines for various devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_INCMACH_H -#error Do not include this file directly. Include asm/hardware.h instead ! -#endif - -/* Hynix H7202 developer board specific device defines */ -#ifdef CONFIG_ARCH_H7202 - -/* FLASH */ -#define H720X_FLASH_VIRT 0xd0000000 -#define H720X_FLASH_PHYS 0x00000000 -#define H720X_FLASH_SIZE 0x02000000 - -/* onboard LAN controller */ -# define ETH0_PHYS 0x08000000 - -/* Touch screen defines */ -/* GPIO Port */ -#define PEN_GPIO GPIO_B_VIRT -/* Bitmask for pen down interrupt */ -#define PEN_INT_BIT (1<<7) -/* Bitmask for pen up interrupt */ -#define PEN_ENA_BIT (1<<6) -/* pen up interrupt */ -#define IRQ_PEN IRQ_MUX_GPIOB(7) - -#endif - -/* Hynix H7201 developer board specific device defines */ -#if defined (CONFIG_ARCH_H7201) -/* ROM DISK SPACE */ -#define ROM_DISK_BASE 0xc1800000 -#define ROM_DISK_START 0x41800000 -#define ROM_DISK_SIZE 0x00700000 - -/* SRAM DISK SPACE */ -#define SRAM_DISK_BASE 0xf1000000 -#define SRAM_DISK_START 0x04000000 -#define SRAM_DISK_SIZE 0x00400000 -#endif - diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S deleted file mode 100644 index 8a46157b058..00000000000 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-h720x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <mach/hardware.h> - - .equ io_virt, IO_VIRT - .equ io_phys, IO_PHYS - - .macro addruart, rp, rv, tmp - mov \rp, #0x00020000 @ UART1 - add \rv, \rp, #io_virt @ virtual address - add \rp, \rp, #io_phys @ physical base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S deleted file mode 100644 index 75267fad701..00000000000 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Hynix HMS720x based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202) - @ we could use the id register on H7202, but this is not - @ properly updated when we come back from asm_do_irq - @ without a previous return from interrupt - @ (see loops below in irq_svc, irq_usr) - @ We see unmasked pending ints only, as the masked pending ints - @ are not visible here - - mov \base, #0xf0000000 @ base register - orr \base, \base, #0x24000 @ irqbase - ldr \irqstat, [\base, #0x04] @ get interrupt status -#if defined (CONFIG_CPU_H7201) - ldr \tmp, =0x001fffff -#else - mvn \tmp, #0xc0000000 -#endif - and \irqstat, \irqstat, \tmp @ mask out unused ints - mov \irqnr, #0 - - mov \tmp, #0xff00 - orr \tmp, \tmp, #0xff - tst \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr #16 - tst \irqstat, #255 - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr #8 - tst \irqstat, #15 - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr #4 - tst \irqstat, #3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr #2 - tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tst \irqstat, #1 @ bit 0 should be set - .endm - -#else -#error hynix processor selection missmatch -#endif - diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h deleted file mode 100644 index 611b4947ccf..00000000000 --- a/arch/arm/mach-h720x/include/mach/h7201-regs.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/h7201-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_VIRT (IO_VIRT + 0x50100) -#define SERIAL3_VIRT (IO_VIRT + 0x50200) - -/* - * PCMCIA - */ -#define PCMCIA0_ATT_BASE 0xe5000000 -#define PCMCIA0_ATT_SIZE 0x00200000 -#define PCMCIA0_ATT_START 0x20000000 -#define PCMCIA0_MEM_BASE 0xe5200000 -#define PCMCIA0_MEM_SIZE 0x00200000 -#define PCMCIA0_MEM_START 0x24000000 -#define PCMCIA0_IO_BASE 0xe5400000 -#define PCMCIA0_IO_SIZE 0x00200000 -#define PCMCIA0_IO_START 0x28000000 - -#define PCMCIA1_ATT_BASE 0xe5600000 -#define PCMCIA1_ATT_SIZE 0x00200000 -#define PCMCIA1_ATT_START 0x30000000 -#define PCMCIA1_MEM_BASE 0xe5800000 -#define PCMCIA1_MEM_SIZE 0x00200000 -#define PCMCIA1_MEM_START 0x34000000 -#define PCMCIA1_IO_BASE 0xe5a00000 -#define PCMCIA1_IO_SIZE 0x00200000 -#define PCMCIA1_IO_START 0x38000000 - -#define PRIME3C_BASE 0xf0050000 -#define PRIME3C_SIZE 0x00001000 -#define PRIME3C_START 0x10000000 - -/* VGA Controller */ -#define VGA_RAMBASE 0x50 -#define VGA_TIMING0 0x60 -#define VGA_TIMING1 0x64 -#define VGA_TIMING2 0x68 -#define VGA_TIMING3 0x6c - -#define LCD_CTRL_VGA_ENABLE 0x00000100 -#define LCD_CTRL_VGA_BPP_MASK 0x00000600 -#define LCD_CTRL_VGA_4BPP 0x00000000 -#define LCD_CTRL_VGA_8BPP 0x00000200 -#define LCD_CTRL_VGA_16BPP 0x00000300 -#define LCD_CTRL_SHARE_DMA 0x00000800 -#define LCD_CTRL_VDE 0x00100000 -#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */ -#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */ - -#define VGA_PALETTE_BASE (IO_VIRT + 0x10800) diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h deleted file mode 100644 index 17c12eb3499..00000000000 --- a/arch/arm/mach-h720x/include/mach/h7202-regs.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/h7202-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_OFS 0x2d000 -#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS) -#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS) -#define SERIAL3_OFS 0x2e000 -#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS) -#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS) - -/* Matrix Keyboard Controller */ -#define KBD_VIRT (IO_VIRT + 0x22000) -#define KBD_KBCR 0x00 -#define KBD_KBSC 0x04 -#define KBD_KBTR 0x08 -#define KBD_KBVR0 0x0C -#define KBD_KBVR1 0x10 -#define KBD_KBSR 0x18 - -#define KBD_KBCR_SCANENABLE (1 << 7) -#define KBD_KBCR_NPOWERDOWN (1 << 2) -#define KBD_KBCR_CLKSEL_MASK (3) -#define KBD_KBCR_CLKSEL_PCLK2 0x0 -#define KBD_KBCR_CLKSEL_PCLK128 0x1 -#define KBD_KBCR_CLKSEL_PCLK256 0x2 -#define KBD_KBCR_CLKSEL_PCLK512 0x3 - -#define KBD_KBSR_INTR (1 << 0) -#define KBD_KBSR_WAKEUP (1 << 1) - -/* USB device controller */ - -#define USBD_BASE (IO_VIRT + 0x12000) -#define USBD_LENGTH 0x3C - -#define USBD_GCTRL 0x00 -#define USBD_EPCTRL 0x04 -#define USBD_INTMASK 0x08 -#define USBD_INTSTAT 0x0C -#define USBD_PWR 0x10 -#define USBD_DMARXTX 0x14 -#define USBD_DEVID 0x18 -#define USBD_DEVCLASS 0x1C -#define USBD_INTCLASS 0x20 -#define USBD_SETUP0 0x24 -#define USBD_SETUP1 0x28 -#define USBD_ENDP0RD 0x2C -#define USBD_ENDP0WT 0x30 -#define USBD_ENDP1RD 0x34 -#define USBD_ENDP2WT 0x38 - -/* PS/2 port */ -#define PSDATA 0x00 -#define PSSTAT 0x04 -#define PSSTAT_TXEMPTY (1<<0) -#define PSSTAT_TXBUSY (1<<1) -#define PSSTAT_RXFULL (1<<2) -#define PSSTAT_RXBUSY (1<<3) -#define PSSTAT_CLKIN (1<<4) -#define PSSTAT_DATAIN (1<<5) -#define PSSTAT_PARITY (1<<6) - -#define PSCONF 0x08 -#define PSCONF_ENABLE (1<<0) -#define PSCONF_TXINTEN (1<<2) -#define PSCONF_RXINTEN (1<<3) -#define PSCONF_FORCECLKLOW (1<<4) -#define PSCONF_FORCEDATLOW (1<<5) -#define PSCONF_LCE (1<<6) - -#define PSINTR 0x0C -#define PSINTR_TXINT (1<<0) -#define PSINTR_RXINT (1<<1) -#define PSINTR_PAR (1<<2) -#define PSINTR_RXTO (1<<3) -#define PSINTR_TXTO (1<<4) - -#define PSTDLO 0x10 /* clk low before start transmission */ -#define PSTPRI 0x14 /* PRI clock */ -#define PSTXMT 0x18 /* maximum transmission time */ -#define PSTREC 0x20 /* maximum receive time */ -#define PSPWDN 0x3c - -/* ADC converter */ -#define ADC_BASE (IO_VIRT + 0x29000) -#define ADC_CR 0x00 -#define ADC_TSCTRL 0x04 -#define ADC_BT_CTRL 0x08 -#define ADC_MC_CTRL 0x0C -#define ADC_STATUS 0x10 - -/* ADC control register bits */ -#define ADC_CR_PW_CTRL 0x80 -#define ADC_CR_DIRECTC 0x04 -#define ADC_CR_CONTIME_NO 0x00 -#define ADC_CR_CONTIME_2 0x04 -#define ADC_CR_CONTIME_4 0x08 -#define ADC_CR_CONTIME_ADE 0x0c -#define ADC_CR_LONGCALTIME 0x01 - -/* ADC touch panel register bits */ -#define ADC_TSCTRL_ENABLE 0x80 -#define ADC_TSCTRL_INTR 0x40 -#define ADC_TSCTRL_SWBYPSS 0x20 -#define ADC_TSCTRL_SWINVT 0x10 -#define ADC_TSCTRL_S400 0x03 -#define ADC_TSCTRL_S200 0x02 -#define ADC_TSCTRL_S100 0x01 -#define ADC_TSCTRL_S50 0x00 - -/* ADC Interrupt Status Register bits */ -#define ADC_STATUS_TS_BIT 0x80 -#define ADC_STATUS_MBT_BIT 0x40 -#define ADC_STATUS_BBT_BIT 0x20 -#define ADC_STATUS_MIC_BIT 0x10 - -/* Touch data registers */ -#define ADC_TS_X0X1 0x30 -#define ADC_TS_X2X3 0x34 -#define ADC_TS_Y0Y1 0x38 -#define ADC_TS_Y2Y3 0x3c -#define ADC_TS_X4X5 0x40 -#define ADC_TS_X6X7 0x44 -#define ADC_TS_Y4Y5 0x48 -#define ADC_TS_Y6Y7 0x50 - -/* battery data */ -#define ADC_MB_DATA 0x54 -#define ADC_BB_DATA 0x58 - -/* Sound data register */ -#define ADC_SD_DAT0 0x60 -#define ADC_SD_DAT1 0x64 -#define ADC_SD_DAT2 0x68 -#define ADC_SD_DAT3 0x6c -#define ADC_SD_DAT4 0x70 -#define ADC_SD_DAT5 0x74 -#define ADC_SD_DAT6 0x78 -#define ADC_SD_DAT7 0x7c diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h deleted file mode 100644 index c55a52c6541..00000000000 --- a/arch/arm/mach-h720x/include/mach/hardware.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/hardware.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define IOCLK (3686400L) - -/* Onchip peripherals */ - -#define IO_VIRT 0xf0000000 /* IO peripherals */ -#define IO_PHYS 0x80000000 -#define IO_SIZE 0x00050000 - -#ifdef CONFIG_CPU_H7202 -#include "h7202-regs.h" -#elif defined CONFIG_CPU_H7201 -#include "h7201-regs.h" -#else -#error machine definition mismatch -#endif - -/* Macro to access the CPU IO */ -#define CPU_IO(x) (*(volatile u32*)(x)) - -/* Macro to access general purpose regs (base, offset) */ -#define CPU_REG(x,y) CPU_IO(x+y) - -/* Macro to access irq related regs */ -#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x) - -/* CPU registers */ -/* general purpose I/O */ -#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5)) -#define GPIO_A_VIRT (GPIO_VIRT(0)) -#define GPIO_B_VIRT (GPIO_VIRT(1)) -#define GPIO_C_VIRT (GPIO_VIRT(2)) -#define GPIO_D_VIRT (GPIO_VIRT(3)) -#define GPIO_E_VIRT (GPIO_VIRT(4)) -#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4) - -#define AMULSEL_USIN2 (1<<5) -#define AMULSEL_USOUT2 (1<<6) -#define AMULSEL_USIN3 (1<<13) -#define AMULSEL_USOUT3 (1<<14) -#define AMULSEL_IRDIN (1<<15) -#define AMULSEL_IRDOUT (1<<7) - -/* Register offsets general purpose I/O */ -#define GPIO_DATA 0x00 -#define GPIO_DIR 0x04 -#define GPIO_MASK 0x08 -#define GPIO_STAT 0x0C -#define GPIO_EDGE 0x10 -#define GPIO_CLR 0x14 -#define GPIO_POL 0x18 -#define GPIO_EN 0x1C - -/*interrupt controller */ -#define IRQC_VIRT (IO_VIRT + 0x24000) -/* register offset interrupt controller */ -#define IRQC_IER 0x00 -#define IRQC_ISR 0x04 - -/* timer unit */ -#define TIMER_VIRT (IO_VIRT + 0x25000) -/* Register offsets timer unit */ -#define TM0_PERIOD 0x00 -#define TM0_COUNT 0x08 -#define TM0_CTRL 0x10 -#define TM1_PERIOD 0x20 -#define TM1_COUNT 0x28 -#define TM1_CTRL 0x30 -#define TM2_PERIOD 0x40 -#define TM2_COUNT 0x48 -#define TM2_CTRL 0x50 -#define TIMER_TOPCTRL 0x60 -#define TIMER_TOPSTAT 0x64 -#define T64_COUNTL 0x80 -#define T64_COUNTH 0x84 -#define T64_CTRL 0x88 -#define T64_BASEL 0x94 -#define T64_BASEH 0x98 -/* Bitmaks timer unit TOPSTAT reg */ -#define TSTAT_T0INT 0x1 -#define TSTAT_T1INT 0x2 -#define TSTAT_T2INT 0x4 -#define TSTAT_T3INT 0x8 -/* Bit description of TMx_CTRL register */ -#define TM_START 0x1 -#define TM_REPEAT 0x2 -#define TM_RESET 0x4 -/* Bit description of TIMER_CTRL register */ -#define ENABLE_TM0_INTR 0x1 -#define ENABLE_TM1_INTR 0x2 -#define ENABLE_TM2_INTR 0x4 -#define TIMER_ENABLE_BIT 0x8 -#define ENABLE_TIMER64 0x10 -#define ENABLE_TIMER64_INT 0x20 - -/* PMU & PLL */ -#define PMU_BASE (IO_VIRT + 0x1000) -#define PMU_MODE 0x00 -#define PMU_STAT 0x20 -#define PMU_PLL_CTRL 0x28 - -/* PMU Mode bits */ -#define PMU_MODE_SLOW 0x00 -#define PMU_MODE_RUN 0x01 -#define PMU_MODE_IDLE 0x02 -#define PMU_MODE_SLEEP 0x03 -#define PMU_MODE_INIT 0x04 -#define PMU_MODE_DEEPSLEEP 0x07 -#define PMU_MODE_WAKEUP 0x08 - -/* PMU ... */ -#define PLL_2_EN 0x8000 -#define PLL_1_EN 0x4000 -#define PLL_3_MUTE 0x0080 - -/* Control bits for PMU/ PLL */ -#define PMU_WARMRESET 0x00010000 -#define PLL_CTRL_MASK23 0x000080ff - -/* LCD Controller */ -#define LCD_BASE (IO_VIRT + 0x10000) -#define LCD_CTRL 0x00 -#define LCD_STATUS 0x04 -#define LCD_STATUS_M 0x08 -#define LCD_INTERRUPT 0x0C -#define LCD_DBAR 0x10 -#define LCD_DCAR 0x14 -#define LCD_TIMING0 0x20 -#define LCD_TIMING1 0x24 -#define LCD_TIMING2 0x28 -#define LCD_TEST 0x40 - -/* LCD Control Bits */ -#define LCD_CTRL_LCD_ENABLE 0x00000001 -/* Bits per pixel */ -#define LCD_CTRL_LCD_BPP_MASK 0x00000006 -#define LCD_CTRL_LCD_4BPP 0x00000000 -#define LCD_CTRL_LCD_8BPP 0x00000002 -#define LCD_CTRL_LCD_16BPP 0x00000004 -#define LCD_CTRL_LCD_BW 0x00000008 -#define LCD_CTRL_LCD_TFT 0x00000010 -#define LCD_CTRL_BGR 0x00001000 -#define LCD_CTRL_LCD_VCOMP 0x00080000 -#define LCD_CTRL_LCD_MONO8 0x00200000 -#define LCD_CTRL_LCD_PWR 0x00400000 -#define LCD_CTRL_LCD_BLE 0x00800000 -#define LCD_CTRL_LDBUSEN 0x01000000 - -/* Palette */ -#define LCD_PALETTE_BASE (IO_VIRT + 0x10400) - -/* Serial ports */ -#define SERIAL0_OFS 0x20000 -#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS) -#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS) - -#define SERIAL1_OFS 0x21000 -#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS) -#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS) - -#define SERIAL_ENABLE 0x30 -#define SERIAL_ENABLE_EN (1<<0) - -/* General defines to pacify gcc */ - -#define __ASM_ARCH_HARDWARE_INCMACH_H -#include "boards.h" -#undef __ASM_ARCH_HARDWARE_INCMACH_H - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h deleted file mode 100644 index 430a92b492f..00000000000 --- a/arch/arm/mach-h720x/include/mach/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/irqs.h - * - * Copyright (C) 2000 Jungjun Kim - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#if defined (CONFIG_CPU_H7201) - -#define IRQ_PMU 0 /* 0x000001 */ -#define IRQ_DMA 1 /* 0x000002 */ -#define IRQ_LCD 2 /* 0x000004 */ -#define IRQ_VGA 3 /* 0x000008 */ -#define IRQ_PCMCIA1 4 /* 0x000010 */ -#define IRQ_PCMCIA2 5 /* 0x000020 */ -#define IRQ_AFE 6 /* 0x000040 */ -#define IRQ_AIC 7 /* 0x000080 */ -#define IRQ_KEYBOARD 8 /* 0x000100 */ -#define IRQ_TIMER0 9 /* 0x000200 */ -#define IRQ_RTC 10 /* 0x000400 */ -#define IRQ_SOUND 11 /* 0x000800 */ -#define IRQ_USB 12 /* 0x001000 */ -#define IRQ_IrDA 13 /* 0x002000 */ -#define IRQ_UART0 14 /* 0x004000 */ -#define IRQ_UART1 15 /* 0x008000 */ -#define IRQ_SPI 16 /* 0x010000 */ -#define IRQ_GPIOA 17 /* 0x020000 */ -#define IRQ_GPIOB 18 /* 0x040000 */ -#define IRQ_GPIOC 19 /* 0x080000 */ -#define IRQ_GPIOD 20 /* 0x100000 */ -#define IRQ_CommRX 21 /* 0x200000 */ -#define IRQ_CommTX 22 /* 0x400000 */ -#define IRQ_Soft 23 /* 0x800000 */ - -#define NR_GLBL_IRQS 24 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define NR_IRQS IRQ_CHAINED_GPIOD(32) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \ - | (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) - - -#elif defined (CONFIG_CPU_H7202) - -#define IRQ_PMU 0 /* 0x00000001 */ -#define IRQ_DMA 1 /* 0x00000002 */ -#define IRQ_LCD 2 /* 0x00000004 */ -#define IRQ_SOUND 3 /* 0x00000008 */ -#define IRQ_I2S 4 /* 0x00000010 */ -#define IRQ_USB 5 /* 0x00000020 */ -#define IRQ_MMC 6 /* 0x00000040 */ -#define IRQ_RTC 7 /* 0x00000080 */ -#define IRQ_UART0 8 /* 0x00000100 */ -#define IRQ_UART1 9 /* 0x00000200 */ -#define IRQ_UART2 10 /* 0x00000400 */ -#define IRQ_UART3 11 /* 0x00000800 */ -#define IRQ_KBD 12 /* 0x00001000 */ -#define IRQ_PS2 13 /* 0x00002000 */ -#define IRQ_AIC 14 /* 0x00004000 */ -#define IRQ_TIMER0 15 /* 0x00008000 */ -#define IRQ_TIMERX 16 /* 0x00010000 */ -#define IRQ_WDT 17 /* 0x00020000 */ -#define IRQ_CAN0 18 /* 0x00040000 */ -#define IRQ_CAN1 19 /* 0x00080000 */ -#define IRQ_EXT0 20 /* 0x00100000 */ -#define IRQ_EXT1 21 /* 0x00200000 */ -#define IRQ_GPIOA 22 /* 0x00400000 */ -#define IRQ_GPIOB 23 /* 0x00800000 */ -#define IRQ_GPIOC 24 /* 0x01000000 */ -#define IRQ_GPIOD 25 /* 0x02000000 */ -#define IRQ_GPIOE 26 /* 0x04000000 */ -#define IRQ_COMMRX 27 /* 0x08000000 */ -#define IRQ_COMMTX 28 /* 0x10000000 */ -#define IRQ_SMC 29 /* 0x20000000 */ -#define IRQ_Soft 30 /* 0x40000000 */ -#define IRQ_RESERVED1 31 /* 0x80000000 */ -#define NR_GLBL_IRQS 32 - -#define NR_TIMERX_IRQS 3 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define IRQ_CHAINED_GPIOE(x) (IRQ_CHAINED_GPIOD(32) + x) -#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x) -#define IRQ_TIMER1 (IRQ_CHAINED_TIMERX(0)) -#define IRQ_TIMER2 (IRQ_CHAINED_TIMERX(1)) -#define IRQ_TIMER64B (IRQ_CHAINED_TIMERX(2)) - -#define NR_IRQS (IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS)) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \ - (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \ - (1<<IRQ_TIMERX) - -#else -#error cpu definition mismatch -#endif - -/* decode irq number to register number */ -#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5) -#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32)) - -#endif diff --git a/arch/arm/mach-h720x/include/mach/isa-dma.h b/arch/arm/mach-h720x/include/mach/isa-dma.h deleted file mode 100644 index 3eafb3f163c..00000000000 --- a/arch/arm/mach-h720x/include/mach/isa-dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/isa-dma.h - * - * Architecture DMA routes - * - * Copyright (C) 1997.1998 Russell King - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#if defined (CONFIG_CPU_H7201) -#define MAX_DMA_CHANNELS 3 -#elif defined (CONFIG_CPU_H7202) -#define MAX_DMA_CHANNELS 4 -#else -#error processor definition missmatch -#endif - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h deleted file mode 100644 index 43e343c4b50..00000000000 --- a/arch/arm/mach-h720x/include/mach/uncompress.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/uncompress.h - * - * Copyright (C) 2001-2002 Jungjun Kim - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/hardware.h> - -#define LSR 0x14 -#define TEMPTY 0x40 - -static inline void putc(int c) -{ - volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0) - barrier(); - - /* write next character */ - *p = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#endif diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index a4f9f50247d..76c1170b352 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -32,7 +32,6 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/smp_plat.h> -#include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/cache-l2x0.h> @@ -119,10 +118,10 @@ static void __init highbank_timer_init(void) sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); - twd_local_timer_of_register(); - arch_timer_of_register(); arch_timer_sched_clock_init(); + + clocksource_of_init(); } static void highbank_power_off(void) diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 8797a700172..a984573e0d0 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> @@ -25,11 +24,6 @@ extern void secondary_startup(void); -static void __cpuinit highbank_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); @@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations highbank_smp_ops __initdata = { .smp_init_cpus = highbank_smp_init_cpus, .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_secondary_init = highbank_secondary_init, .smp_boot_secondary = highbank_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = highbank_cpu_die, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4c9c6f9d2c5..6575e4ebe26 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -83,24 +83,12 @@ config ARCH_MXC_IOMUX_V3 config ARCH_MX1 bool -config MACH_MX21 - bool - config ARCH_MX25 bool config MACH_MX27 bool -config ARCH_MX5 - bool - -config ARCH_MX51 - bool - -config ARCH_MX53 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -114,7 +102,6 @@ config SOC_IMX21 select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 - select MACH_MX21 select MXC_AVIC config SOC_IMX25 @@ -155,7 +142,6 @@ config SOC_IMX35 config SOC_IMX5 bool select ARCH_HAS_CPUFREQ - select ARCH_MX5 select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V7 @@ -163,8 +149,6 @@ config SOC_IMX5 config SOC_IMX51 bool - select ARCH_MX5 - select ARCH_MX51 select PINCTRL select PINCTRL_IMX51 select SOC_IMX5 @@ -789,8 +773,6 @@ comment "Device tree only" config SOC_IMX53 bool "i.MX53 support" - select ARCH_MX5 - select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index c4ce0906d76..23555b0c08a 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci- obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o @@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifeq ($(CONFIG_CPU_IDLE),y) obj-y += cpuidle.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index 41ba1bb0437..00000000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,35 +0,0 @@ -zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000 -params_phys-$(CONFIG_SOC_IMX1) := 0x08000100 -initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000 - -zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000 -params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100 -initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000 - -zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX25) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000 -params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100 -initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000 - -zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX31) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 -params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 -initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 - -zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 -params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 -initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 - -zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 -params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 -initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 0eff23ed92b..49c87e7aa81 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -54,8 +54,6 @@ void __iomem *avic_base; static struct irq_domain *domain; -static u32 avic_saved_mask_reg[2]; - #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = { }; #ifdef CONFIG_PM +static u32 avic_saved_mask_reg[2]; + static void avic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1ab91b5209e..85b728cc27a 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, busy->mux.reg = reg; busy->mux.shift = shift; - busy->mux.width = width; + busy->mux.mask = BIT(width) - 1; busy->mux.lock = &imx_ccm_lock; busy->mux_ops = &clk_mux_ops; diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 30b3242a7d4..8e3b6571910 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -278,8 +278,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], "cpu", NULL); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); - clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5bf4a97ab24..9fea2522d7a 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -113,7 +113,6 @@ extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern u32 imx_get_cpu_arg(int cpu); extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); -extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP extern void v7_secondary_startup(void); extern void imx_scu_map_io(void); @@ -124,8 +123,6 @@ static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern void imx_src_init(void); extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c deleted file mode 100644 index b9ef692b61a..00000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/bug.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include "hardware.h" - -static struct cpu_op mx51_cpu_op[] = { - { - .cpu_rate = 160000000,}, - { - .cpu_rate = 800000000,}, -}; - -struct cpu_op *mx51_get_cpu_op(int *op) -{ - *op = ARRAY_SIZE(mx51_cpu_op); - return mx51_cpu_op; -} diff --git a/arch/arm/mach-imx/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h deleted file mode 100644 index 97477fecb46..00000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -extern struct cpu_op *mx51_get_cpu_op(int *op); diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index d8c75c3c925..00000000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/* - * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controlling CPU frequency. It allows you to change - * the CPU clock speed on the fly. - */ - -#include <linux/module.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include "hardware.h" - -#define CLK32_FREQ 32768 -#define NANOSECOND (1000 * 1000 * 1000) - -struct cpu_op *(*get_cpu_op)(int *op); - -static int cpu_freq_khz_min; -static int cpu_freq_khz_max; - -static struct clk *cpu_clk; -static struct cpufreq_frequency_table *imx_freq_table; - -static int cpu_op_nr; -static struct cpu_op *cpu_op_tbl; - -static int set_cpu_freq(int freq) -{ - int ret = 0; - int org_cpu_rate; - - org_cpu_rate = clk_get_rate(cpu_clk); - if (org_cpu_rate == freq) - return ret; - - ret = clk_set_rate(cpu_clk, freq); - if (ret != 0) { - printk(KERN_DEBUG "cannot set CPU clock rate\n"); - return ret; - } - - return ret; -} - -static int mxc_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, imx_freq_table); -} - -static unsigned int mxc_get_speed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int mxc_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct cpufreq_freqs freqs; - int freq_Hz; - int ret = 0; - unsigned int index; - - cpufreq_frequency_table_target(policy, imx_freq_table, - target_freq, relation, &index); - freq_Hz = imx_freq_table[index].frequency * 1000; - - freqs.old = clk_get_rate(cpu_clk) / 1000; - freqs.new = freq_Hz / 1000; - freqs.cpu = 0; - freqs.flags = 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - ret = set_cpu_freq(freq_Hz); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int mxc_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret; - int i; - - printk(KERN_INFO "i.MXC CPU frequency driver\n"); - - if (policy->cpu != 0) - return -EINVAL; - - if (!get_cpu_op) - return -EINVAL; - - cpu_clk = clk_get(NULL, "cpu_clk"); - if (IS_ERR(cpu_clk)) { - printk(KERN_ERR "%s: failed to get cpu clock\n", __func__); - return PTR_ERR(cpu_clk); - } - - cpu_op_tbl = get_cpu_op(&cpu_op_nr); - - cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000; - cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000; - - imx_freq_table = kmalloc( - sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1), - GFP_KERNEL); - if (!imx_freq_table) { - ret = -ENOMEM; - goto err1; - } - - for (i = 0; i < cpu_op_nr; i++) { - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) - cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max) - cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; - } - - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = CPUFREQ_TABLE_END; - - policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; - policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; - - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; - - ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); - - if (ret < 0) { - printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", - __func__, ret); - goto err; - } - - cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu); - return 0; -err: - kfree(imx_freq_table); -err1: - clk_put(cpu_clk); - return ret; -} - -static int mxc_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - - set_cpu_freq(cpu_freq_khz_max * 1000); - clk_put(cpu_clk); - kfree(imx_freq_table); - return 0; -} - -static struct cpufreq_driver mxc_driver = { - .flags = CPUFREQ_STICKY, - .verify = mxc_verify_speed, - .target = mxc_set_target, - .get = mxc_get_speed, - .init = mxc_cpufreq_init, - .exit = mxc_cpufreq_exit, - .name = "imx", -}; - -static int mxc_cpufreq_driver_init(void) -{ - return cpufreq_register_driver(&mxc_driver); -} - -static void mxc_cpufreq_driver_exit(void) -{ - cpufreq_unregister_driver(&mxc_driver); -} - -module_init(mxc_cpufreq_driver_init); -module_exit(mxc_cpufreq_driver_exit); - -MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>"); -MODULE_DESCRIPTION("CPUfreq driver for i.MX"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 9b9ba1f4ffe..3dd2b1b041d 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool - -config IMX_HAVE_PLATFORM_AHCI - bool - default y if ARCH_MX53 diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 6acf37e0c11..67416fb1dc6 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 9bd5777ff0e..453e20bc265 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); - -#include <linux/ahci_platform.h> -struct imx_ahci_imx_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c deleted file mode 100644 index 3d87dd9c284..00000000000 --- a/arch/arm/mach-imx/devices/platform-ahci-imx.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <asm/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_ahci_imx_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _SATA_BASE_ADDR, \ - .irq = soc ## _INT_SATA, \ - } - -#ifdef CONFIG_SOC_IMX53 -const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst = - imx_ahci_imx_data_entry_single(MX53, "imx53-ahci"); -#endif - -enum { - HOST_CAP = 0x00, - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_PORTS_IMPL = 0x0c, - HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ -}; - -static struct clk *sata_clk, *sata_ref_clk; - -/* AHCI module Initialization, if return 0, initialization is successful. */ -static int imx_sata_init(struct device *dev, void __iomem *addr) -{ - u32 tmpdata; - int ret = 0; - struct clk *clk; - - sata_clk = clk_get(dev, "ahci"); - if (IS_ERR(sata_clk)) { - dev_err(dev, "no sata clock.\n"); - return PTR_ERR(sata_clk); - } - ret = clk_prepare_enable(sata_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata clock.\n"); - goto put_sata_clk; - } - - /* Get the AHCI SATA PHY CLK */ - sata_ref_clk = clk_get(dev, "ahci_phy"); - if (IS_ERR(sata_ref_clk)) { - dev_err(dev, "no sata ref clock.\n"); - ret = PTR_ERR(sata_ref_clk); - goto release_sata_clk; - } - ret = clk_prepare_enable(sata_ref_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata ref clock.\n"); - goto put_sata_ref_clk; - } - - /* Get the AHB clock rate, and configure the TIMER1MS reg later */ - clk = clk_get(dev, "ahci_dma"); - if (IS_ERR(clk)) { - dev_err(dev, "no dma clock.\n"); - ret = PTR_ERR(clk); - goto release_sata_ref_clk; - } - tmpdata = clk_get_rate(clk) / 1000; - clk_put(clk); - - writel(tmpdata, addr + HOST_TIMER1MS); - - tmpdata = readl(addr + HOST_CAP); - if (!(tmpdata & HOST_CAP_SSS)) { - tmpdata |= HOST_CAP_SSS; - writel(tmpdata, addr + HOST_CAP); - } - - if (!(readl(addr + HOST_PORTS_IMPL) & 0x1)) - writel((readl(addr + HOST_PORTS_IMPL) | 0x1), - addr + HOST_PORTS_IMPL); - - return 0; - -release_sata_ref_clk: - clk_disable_unprepare(sata_ref_clk); -put_sata_ref_clk: - clk_put(sata_ref_clk); -release_sata_clk: - clk_disable_unprepare(sata_clk); -put_sata_clk: - clk_put(sata_clk); - - return ret; -} - -static void imx_sata_exit(struct device *dev) -{ - clk_disable_unprepare(sata_ref_clk); - clk_put(sata_ref_clk); - - clk_disable_unprepare(sata_clk); - clk_put(sata_clk); - -} -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device_dmamask(data->devid, 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} - -struct platform_device *__init imx53_add_ahci_imx(void) -{ - struct ahci_platform_data pdata = { - .init = imx_sata_init, - .exit = imx_sata_exit, - }; - - return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata); -} diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 911e9b31b03..356131f7b59 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -102,7 +102,6 @@ #include "mxc.h" -#include "mx6q.h" #include "mx51.h" #include "mx53.h" #include "mx3x.h" diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9b7393234f6..9b5ddf5bbd3 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -33,7 +33,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx51.h" @@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif - imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); imx51_add_imx2_wdt(0); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9ffd103b27e..b59ddcb57c7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> @@ -28,11 +29,9 @@ #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> -#include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include "common.h" @@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { mx6q_clocks_init(); - twd_local_timer_of_register(); + clocksource_of_init(); imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index 6c4d7feb452..f3d264a636f 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -27,7 +27,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "hardware.h" #include "iomux-mx51.h" @@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void) imx51_soc_init(); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif imx51_babbage_common_init(); imx51_add_imx_uart(0, &uart_pdata); diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h deleted file mode 100644 index 19d3f54db5a..00000000000 --- a/arch/arm/mach-imx/mx6q.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __MACH_MX6Q_H__ -#define __MACH_MX6Q_H__ - -#define MX6Q_IO_P2V(x) IMX_IO_P2V(x) -#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x)) - -/* - * The following are the blocks that need to be statically mapped. - * For other blocks, the base address really should be retrieved from - * device tree. - */ -#define MX6Q_SCU_BASE_ADDR 0x00a00000 -#define MX6Q_SCU_SIZE 0x1000 -#define MX6Q_CCM_BASE_ADDR 0x020c4000 -#define MX6Q_CCM_SIZE 0x4000 -#define MX6Q_ANATOP_BASE_ADDR 0x020c8000 -#define MX6Q_ANATOP_SIZE 0x1000 - -#endif /* __MACH_MX6Q_H__ */ diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7c0b03f67b0..77e9a25ed0f 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -52,16 +51,6 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static void __cpuinit imx_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); @@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations imx_smp_ops __initdata = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, - .smp_secondary_init = imx_secondary_init, .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S deleted file mode 100644 index 0b4e760159b..00000000000 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-l7200/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart, rp, rv, tmp - mov \rp, #0x00044000 @ UART1 -@ mov \rp, #0x00045000 @ UART2 - add \rv, \rp, #io_virt @ virtual address - add \rp, \rp, #io_phys @ physical base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 84d720af34a..82eaf88d202 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -59,6 +59,7 @@ static struct platform_device smc91x_device = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, &msm_device_nand, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 7bc3f82e3ec..520c141acd0 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -89,6 +89,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7x30, #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, #endif diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 686e7949a73..38a532d6937 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -89,6 +89,7 @@ static struct msm_otg_platform_data msm_otg_pdata = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_8x50, &msm_device_uart3, &msm_device_smd, &msm_device_otg, diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 919bfa32871..80fe1c5ff5c 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -36,6 +36,7 @@ extern int trout_init_mmc(unsigned int); static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, &msm_device_nand, diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index f66ee6ea872..1a0a2306b11 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -29,6 +29,37 @@ #include "clock-pcom.h" #include <linux/platform_data/mmc-msm_sdcc.h> +static struct resource msm_gpio_resources[] = { + { + .start = 32 + 0, + .end = 32 + 0, + .flags = IORESOURCE_IRQ, + }, + { + .start = 32 + 1, + .end = 32 + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xa9200800, + .end = 0xa9200800 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xa9300C00, + .end = 0xa9300C00 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_7201 = { + .name = "gpio-msm-7201", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart1[] = { { .start = INT_UART1, diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index e90ab5938c5..12f482c0774 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -33,6 +33,37 @@ #include <linux/platform_data/mmc-msm_sdcc.h> +static struct resource msm_gpio_resources[] = { + { + .start = 32 + 18, + .end = 32 + 18, + .flags = IORESOURCE_IRQ, + }, + { + .start = 32 + 19, + .end = 32 + 19, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xac001000, + .end = 0xac001000 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xac101400, + .end = 0xac101400 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_7x30 = { + .name = "gpio-msm-7x30", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart2[] = { { .start = INT_UART2, diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 4db61d5fe31..2e1b3ec9dfc 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -30,6 +30,37 @@ #include <linux/platform_data/mmc-msm_sdcc.h> #include "clock-pcom.h" +static struct resource msm_gpio_resources[] = { + { + .start = 64 + 165 + 9, + .end = 64 + 165 + 9, + .flags = IORESOURCE_IRQ, + }, + { + .start = 64 + 165 + 10, + .end = 64 + 165 + 10, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xa9000800, + .end = 0xa9000800 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xa9100C00, + .end = 0xa9100C00 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_8x50 = { + .name = "gpio-msm-8x50", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart3[] = { { .start = INT_UART3, diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h index 9545c196c6e..da902cf5116 100644 --- a/arch/arm/mach-msm/devices.h +++ b/arch/arm/mach-msm/devices.h @@ -20,6 +20,10 @@ #include "clock.h" +extern struct platform_device msm_device_gpio_7201; +extern struct platform_device msm_device_gpio_7x30; +extern struct platform_device msm_device_gpio_8x50; + extern struct platform_device msm_device_uart1; extern struct platform_device msm_device_uart2; extern struct platform_device msm_device_uart3; diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 354b91d4c3a..b279fd8a31b 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -19,9 +19,35 @@ #include <linux/interrupt.h> #include <linux/completion.h> #include <mach/dma.h> +#include <mach/msm_iomap.h> #define MSM_DMOV_CHANNEL_COUNT 16 +#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) +#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) +#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) +#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) + +#if defined(CONFIG_ARCH_MSM7X30) +#define DMOV_SD_AARM DMOV_SD2 +#else +#define DMOV_SD_AARM DMOV_SD3 +#endif + +#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) +#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) +#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) +#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) +#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) +#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) +#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) +#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) + +#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) +#define DMOV_ISR DMOV_SD_AARM(0x380, 0) + +#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) + enum { MSM_DMOV_PRINT_ERRORS = 1, MSM_DMOV_PRINT_IO = 2, diff --git a/arch/arm/mach-msm/include/mach/cpu.h b/arch/arm/mach-msm/include/mach/cpu.h deleted file mode 100644 index a9481b08d5c..00000000000 --- a/arch/arm/mach-msm/include/mach/cpu.h +++ /dev/null @@ -1,54 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __ARCH_ARM_MACH_MSM_CPU_H__ -#define __ARCH_ARM_MACH_MSM_CPU_H__ - -/* TODO: For now, only one CPU can be compiled at a time. */ - -#define cpu_is_msm7x01() 0 -#define cpu_is_msm7x30() 0 -#define cpu_is_qsd8x50() 0 -#define cpu_is_msm8x60() 0 -#define cpu_is_msm8960() 0 - -#ifdef CONFIG_ARCH_MSM7X00A -# undef cpu_is_msm7x01 -# define cpu_is_msm7x01() 1 -#endif - -#ifdef CONFIG_ARCH_MSM7X30 -# undef cpu_is_msm7x30 -# define cpu_is_msm7x30() 1 -#endif - -#ifdef CONFIG_ARCH_QSD8X50 -# undef cpu_is_qsd8x50 -# define cpu_is_qsd8x50() 1 -#endif - -#ifdef CONFIG_ARCH_MSM8X60 -# undef cpu_is_msm8x60 -# define cpu_is_msm8x60() 1 -#endif - -#ifdef CONFIG_ARCH_MSM8960 -# undef cpu_is_msm8960 -# define cpu_is_msm8960() 1 -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 05583f56952..a72d48d4234 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -16,7 +16,6 @@ #ifndef __ASM_ARCH_MSM_DMA_H #include <linux/list.h> -#include <mach/msm_iomap.h> struct msm_dmov_errdata { uint32_t flush[6]; @@ -45,48 +44,23 @@ static inline int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; } #endif - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define DMOV_SD_AARM DMOV_SD2 -#else -#define DMOV_SD_AARM DMOV_SD3 -#endif - -#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) #define DMOV_CMD_LIST (0 << 29) /* does not work */ #define DMOV_CMD_PTR_LIST (1 << 29) /* works */ #define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ #define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ #define DMOV_CMD_ADDR(addr) ((addr) >> 3) -#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) #define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ #define DMOV_RSLT_ERROR (1 << 3) #define DMOV_RSLT_FLUSH (1 << 2) #define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ #define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ -#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) #define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) #define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) #define DMOV_STATUS_RSLT_VALID (1 << 1) #define DMOV_STATUS_CMD_PTR_RDY (1 << 0) -#define DMOV_ISR DMOV_SD_AARM(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) #define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) #define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) #define DMOV_CONFIG_IRQ_EN (1 << 0) diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 42932865416..00cdb0a5dac 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -42,13 +41,6 @@ static inline int get_core_count(void) static void __cpuinit msm_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 3d3c8a97306..80db7269760 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,2 @@ -# Common support -obj-y := icoll.o ocotp.o system.o timer.o mm.o - obj-$(CONFIG_PM) += pm.o - obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h deleted file mode 100644 index be5a9c93cb2..00000000000 --- a/arch/arm/mach-mxs/include/mach/common.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_COMMON_H__ -#define __MACH_MXS_COMMON_H__ - -extern const u32 *mxs_get_ocotp(void); -extern int mxs_reset_block(void __iomem *); -extern void mxs_timer_init(void); -extern void mxs_restart(char, const char *); -extern int mxs_saif_clkmux_select(unsigned int clkmux); - -extern int mx23_clocks_init(void); -extern void mx23_map_io(void); - -extern int mx28_clocks_init(void); -extern void mx28_map_io(void); - -extern void icoll_init_irq(void); -extern void icoll_handle_irq(struct pt_regs *); - -#endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 90c6b7836ad..d86951551ca 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -11,16 +11,13 @@ * */ -#include <mach/mx23.h> -#include <mach/mx28.h> - #ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR MX23_DUART_BASE_ADDR +#define UART_PADDR 0x80070000 #elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR MX28_DUART_BASE_ADDR +#define UART_PADDR 0x80074000 #endif -#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) +#define UART_VADDR 0xfe100000 .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h deleted file mode 100644 index 17964066303..00000000000 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_DIGCTL_H__ -#define __MACH_DIGCTL_H__ - -/* MXS DIGCTL SAIF CLKMUX */ -#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 -#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 - -#define HW_DIGCTL_CTRL 0x0 -#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 -#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) -#define HW_DIGCTL_CHIPID 0x310 -#endif diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h deleted file mode 100644 index 4c0e8a64d8c..00000000000 --- a/arch/arm/mach-mxs/include/mach/hardware.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_HARDWARE_H__ -#define __MACH_MXS_HARDWARE_H__ - -#endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h deleted file mode 100644 index 599094bc99d..00000000000 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX23_H__ -#define __MACH_MX23_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX23_OCRAM_BASE_ADDR 0x00000000 -#define MX23_OCRAM_SIZE SZ_32K - -/* - * IO - */ -#define MX23_IO_BASE_ADDR 0x80000000 -#define MX23_IO_SIZE SZ_1M - -#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000) -#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000) -#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000) -#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000) -#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000) -#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000) -#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000) -#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000) -#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000) -#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000) -#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000) -#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000) -#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000) -#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000) -#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000) -#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000) -#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000) -#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000) -#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000) -#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000) -#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000) -#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) -#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) -#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) -#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) -#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) -#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) -#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) -#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000) -#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000) -#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000) -#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000) -#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000) -#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000) - -#define MX23_IO_P2V(x) MXS_IO_P2V(x) -#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x)) - -/* - * IRQ - */ -#define MX23_INT_DUART 0 -#define MX23_INT_COMMS_RX 1 -#define MX23_INT_COMMS_TX 1 -#define MX23_INT_SSP2_ERROR 2 -#define MX23_INT_VDD5V 3 -#define MX23_INT_HEADPHONE_SHORT 4 -#define MX23_INT_DAC_DMA 5 -#define MX23_INT_DAC_ERROR 6 -#define MX23_INT_ADC_DMA 7 -#define MX23_INT_ADC_ERROR 8 -#define MX23_INT_SPDIF_DMA 9 -#define MX23_INT_SAIF2_DMA 9 -#define MX23_INT_SPDIF_ERROR 10 -#define MX23_INT_SAIF1_IRQ 10 -#define MX23_INT_SAIF2_IRQ 10 -#define MX23_INT_USB_CTRL 11 -#define MX23_INT_USB_WAKEUP 12 -#define MX23_INT_GPMI_DMA 13 -#define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP1_ERROR 15 -#define MX23_INT_GPIO0 16 -#define MX23_INT_GPIO1 17 -#define MX23_INT_GPIO2 18 -#define MX23_INT_SAIF1_DMA 19 -#define MX23_INT_SSP2_DMA 20 -#define MX23_INT_ECC8_IRQ 21 -#define MX23_INT_RTC_ALARM 22 -#define MX23_INT_AUART1_TX_DMA 23 -#define MX23_INT_AUART1 24 -#define MX23_INT_AUART1_RX_DMA 25 -#define MX23_INT_I2C_DMA 26 -#define MX23_INT_I2C_ERROR 27 -#define MX23_INT_TIMER0 28 -#define MX23_INT_TIMER1 29 -#define MX23_INT_TIMER2 30 -#define MX23_INT_TIMER3 31 -#define MX23_INT_BATT_BRNOUT 32 -#define MX23_INT_VDDD_BRNOUT 33 -#define MX23_INT_VDDIO_BRNOUT 34 -#define MX23_INT_VDD18_BRNOUT 35 -#define MX23_INT_TOUCH_DETECT 36 -#define MX23_INT_LRADC_CH0 37 -#define MX23_INT_LRADC_CH1 38 -#define MX23_INT_LRADC_CH2 39 -#define MX23_INT_LRADC_CH3 40 -#define MX23_INT_LRADC_CH4 41 -#define MX23_INT_LRADC_CH5 42 -#define MX23_INT_LRADC_CH6 43 -#define MX23_INT_LRADC_CH7 44 -#define MX23_INT_LCDIF_DMA 45 -#define MX23_INT_LCDIF_ERROR 46 -#define MX23_INT_DIGCTL_DEBUG_TRAP 47 -#define MX23_INT_RTC_1MSEC 48 -#define MX23_INT_DRI_DMA 49 -#define MX23_INT_DRI_ATTENTION 50 -#define MX23_INT_GPMI_ATTENTION 51 -#define MX23_INT_IR 52 -#define MX23_INT_DCP_VMI 53 -#define MX23_INT_DCP 54 -#define MX23_INT_BCH 56 -#define MX23_INT_PXP 57 -#define MX23_INT_AUART2_TX_DMA 58 -#define MX23_INT_AUART2 59 -#define MX23_INT_AUART2_RX_DMA 60 -#define MX23_INT_VDAC_DETECT 61 -#define MX23_INT_VDD5V_DROOP 64 -#define MX23_INT_DCDC4P2_BO 65 - -/* - * APBH DMA - */ -#define MX23_DMA_SSP1 1 -#define MX23_DMA_SSP2 2 -#define MX23_DMA_GPMI0 4 -#define MX23_DMA_GPMI1 5 -#define MX23_DMA_GPMI2 6 -#define MX23_DMA_GPMI3 7 - -/* - * APBX DMA - */ -#define MX23_DMA_ADC 0 -#define MX23_DMA_DAC 1 -#define MX23_DMA_SPDIF 2 -#define MX23_DMA_I2C 3 -#define MX23_DMA_SAIF0 4 -#define MX23_DMA_UART0_RX 6 -#define MX23_DMA_UART0_TX 7 -#define MX23_DMA_UART1_RX 8 -#define MX23_DMA_UART1_TX 9 -#define MX23_DMA_SAIF1 10 - -#endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h deleted file mode 100644 index 30c7990f3c0..00000000000 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX28_H__ -#define __MACH_MX28_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX28_OCRAM_BASE_ADDR 0x00000000 -#define MX28_OCRAM_SIZE SZ_128K - -/* - * IO - */ -#define MX28_IO_BASE_ADDR 0x80000000 -#define MX28_IO_SIZE SZ_1M - -#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000) -#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000) -#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000) -#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000) -#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000) -#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000) -#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000) -#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000) -#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000) -#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000) -#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000) -#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000) -#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000) -#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000) -#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000) -#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000) -#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000) -#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000) -#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000) -#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000) -#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000) -#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000) -#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200) -#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300) -#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400) -#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500) -#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700) -#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800) -#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000) -#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000) -#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000) -#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000) -#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000) -#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000) -#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000) -#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000) -#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000) -#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000) -#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000) -#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000) -#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000) -#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000) -#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000) -#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000) -#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000) -#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000) -#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000) -#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000) -#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000) -#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000) -#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000) -#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000) -#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000) - -#define MX28_IO_P2V(x) MXS_IO_P2V(x) -#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x)) - -/* - * IRQ - */ -#define MX28_INT_BATT_BRNOUT 0 -#define MX28_INT_VDDD_BRNOUT 1 -#define MX28_INT_VDDIO_BRNOUT 2 -#define MX28_INT_VDDA_BRNOUT 3 -#define MX28_INT_VDD5V_DROOP 4 -#define MX28_INT_DCDC4P2_BRNOUT 5 -#define MX28_INT_VDD5V 6 -#define MX28_INT_CAN0 8 -#define MX28_INT_CAN1 9 -#define MX28_INT_LRADC_TOUCH 10 -#define MX28_INT_HSADC 13 -#define MX28_INT_LRADC_THRESH0 14 -#define MX28_INT_LRADC_THRESH1 15 -#define MX28_INT_LRADC_CH0 16 -#define MX28_INT_LRADC_CH1 17 -#define MX28_INT_LRADC_CH2 18 -#define MX28_INT_LRADC_CH3 19 -#define MX28_INT_LRADC_CH4 20 -#define MX28_INT_LRADC_CH5 21 -#define MX28_INT_LRADC_CH6 22 -#define MX28_INT_LRADC_CH7 23 -#define MX28_INT_LRADC_BUTTON0 24 -#define MX28_INT_LRADC_BUTTON1 25 -#define MX28_INT_PERFMON 27 -#define MX28_INT_RTC_1MSEC 28 -#define MX28_INT_RTC_ALARM 29 -#define MX28_INT_COMMS 31 -#define MX28_INT_EMI_ERR 32 -#define MX28_INT_LCDIF 38 -#define MX28_INT_PXP 39 -#define MX28_INT_BCH 41 -#define MX28_INT_GPMI 42 -#define MX28_INT_SPDIF_ERROR 45 -#define MX28_INT_DUART 47 -#define MX28_INT_TIMER0 48 -#define MX28_INT_TIMER1 49 -#define MX28_INT_TIMER2 50 -#define MX28_INT_TIMER3 51 -#define MX28_INT_DCP_VMI 52 -#define MX28_INT_DCP 53 -#define MX28_INT_DCP_SECURE 54 -#define MX28_INT_SAIF1 58 -#define MX28_INT_SAIF0 59 -#define MX28_INT_SPDIF_DMA 66 -#define MX28_INT_I2C0_DMA 68 -#define MX28_INT_I2C1_DMA 69 -#define MX28_INT_AUART0_RX_DMA 70 -#define MX28_INT_AUART0_TX_DMA 71 -#define MX28_INT_AUART1_RX_DMA 72 -#define MX28_INT_AUART1_TX_DMA 73 -#define MX28_INT_AUART2_RX_DMA 74 -#define MX28_INT_AUART2_TX_DMA 75 -#define MX28_INT_AUART3_RX_DMA 76 -#define MX28_INT_AUART3_TX_DMA 77 -#define MX28_INT_AUART4_RX_DMA 78 -#define MX28_INT_AUART4_TX_DMA 79 -#define MX28_INT_SAIF0_DMA 80 -#define MX28_INT_SAIF1_DMA 81 -#define MX28_INT_SSP0_DMA 82 -#define MX28_INT_SSP1_DMA 83 -#define MX28_INT_SSP2_DMA 84 -#define MX28_INT_SSP3_DMA 85 -#define MX28_INT_LCDIF_DMA 86 -#define MX28_INT_HSADC_DMA 87 -#define MX28_INT_GPMI_DMA 88 -#define MX28_INT_DIGCTL_DEBUG_TRAP 89 -#define MX28_INT_USB1 92 -#define MX28_INT_USB0 93 -#define MX28_INT_USB1_WAKEUP 94 -#define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0_ERROR 96 -#define MX28_INT_SSP1_ERROR 97 -#define MX28_INT_SSP2_ERROR 98 -#define MX28_INT_SSP3_ERROR 99 -#define MX28_INT_ENET_SWI 100 -#define MX28_INT_ENET_MAC0 101 -#define MX28_INT_ENET_MAC1 102 -#define MX28_INT_ENET_MAC0_1588 103 -#define MX28_INT_ENET_MAC1_1588 104 -#define MX28_INT_I2C1_ERROR 110 -#define MX28_INT_I2C0_ERROR 111 -#define MX28_INT_AUART0 112 -#define MX28_INT_AUART1 113 -#define MX28_INT_AUART2 114 -#define MX28_INT_AUART3 115 -#define MX28_INT_AUART4 116 -#define MX28_INT_GPIO4 123 -#define MX28_INT_GPIO3 124 -#define MX28_INT_GPIO2 125 -#define MX28_INT_GPIO1 126 -#define MX28_INT_GPIO0 127 - -/* - * APBH DMA - */ -#define MX28_DMA_SSP0 0 -#define MX28_DMA_SSP1 1 -#define MX28_DMA_SSP2 2 -#define MX28_DMA_SSP3 3 -#define MX28_DMA_GPMI0 4 -#define MX28_DMA_GPMI1 5 -#define MX28_DMA_GPMI2 6 -#define MX28_DMA_GPMI3 7 -#define MX28_DMA_GPMI4 8 -#define MX28_DMA_GPMI5 9 -#define MX28_DMA_GPMI6 10 -#define MX28_DMA_GPMI7 11 -#define MX28_DMA_HSADC 12 -#define MX28_DMA_LCDIF 13 - -/* - * APBX DMA - */ -#define MX28_DMA_AUART4_RX 0 -#define MX28_DMA_AUART4_TX 1 -#define MX28_DMA_SPDIF_TX 2 -#define MX28_DMA_SAIF0 4 -#define MX28_DMA_SAIF1 5 -#define MX28_DMA_I2C0 6 -#define MX28_DMA_I2C1 7 -#define MX28_DMA_AUART0_RX 8 -#define MX28_DMA_AUART0_TX 9 -#define MX28_DMA_AUART1_RX 10 -#define MX28_DMA_AUART1_TX 11 -#define MX28_DMA_AUART2_RX 12 -#define MX28_DMA_AUART2_TX 13 -#define MX28_DMA_AUART3_RX 14 -#define MX28_DMA_AUART3_TX 15 - -#endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h deleted file mode 100644 index 7d4fb6d0afd..00000000000 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_H__ -#define __MACH_MXS_H__ - -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif -#include <asm/mach-types.h> -#include <mach/digctl.h> -#include <mach/hardware.h> - -/* - * IO addresses common to MXS-based - */ -#define MXS_IO_BASE_ADDR 0x80000000 -#define MXS_IO_SIZE SZ_1M - -#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000) -#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000) -#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000) -#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000) -#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000) -#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000) -#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000) -#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000) -#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000) -#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000) -#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000) -#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000) -#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000) -#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000) -#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000) -#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000) -#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000) -#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000) -#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000) -#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000) -#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000) -#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000) -#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000) -#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000) - -/* - * It maps the whole address space to [0xf4000000, 0xf50fffff]. - * - * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000 - * IO 0x80000000+0x100000 -> 0xf5000000+0x100000 - */ -#define MXS_IO_P2V(x) (0xf4000000 + \ - (((x) & 0x80000000) >> 7) + \ - (((x) & 0x000fffff))) - -#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x)) - -#define mxs_map_entry(soc, name, _type) { \ - .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ - .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ - .length = soc ## _ ## name ## _SIZE, \ - .type = _type, \ -} - -#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) - -#define MXS_SET_ADDR 0x4 -#define MXS_CLR_ADDR 0x8 -#define MXS_TOG_ADDR 0xc - -#ifndef __ASSEMBLER__ -static inline void __mxs_setl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_SET_ADDR); -} - -static inline void __mxs_clrl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_CLR_ADDR); -} - -static inline void __mxs_togl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_TOG_ADDR); -} - -/* - * MXS CPU types - */ -#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) - -static inline int cpu_is_mx23(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); -} - -static inline int cpu_is_mx28(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); -} -#endif - -#endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index e7b781d3788..16870bf853b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -11,22 +11,53 @@ */ #include <linux/clk.h> +#include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/can/platform/flexcan.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/irqchip.h> +#include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> #include <linux/mxsfb.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/digctl.h> -#include <mach/mxs.h> +#include <asm/system_misc.h> + +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 + +#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) + +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MXS_TOG_ADDR 0xc + +static inline void __mxs_setl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_SET_ADDR); +} + +static inline void __mxs_clrl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_CLR_ADDR); +} + +static inline void __mxs_togl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_TOG_ADDR); +} static struct fb_videomode mx23evk_video_modes[] = { { @@ -165,14 +196,80 @@ static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { { /* sentinel */ } }; -static void __init imx23_timer_init(void) -{ - mx23_clocks_init(); -} +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) -static void __init imx28_timer_init(void) +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +static const u32 *mxs_get_ocotp(void) { - mx28_clocks_init(); + struct device_node *np; + void __iomem *ocotp_base; + int timeout = 0x400; + size_t i; + static int once; + + if (once) + return ocotp_words; + + np = of_find_compatible_node(NULL, NULL, "fsl,ocotp"); + ocotp_base = of_iomap(np, 0); + WARN_ON(!ocotp_base); + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; } enum mac_oui { @@ -454,32 +551,62 @@ static void __init mxs_machine_init(void) imx28_evk_post_init(); } -static const char *imx23_dt_compat[] __initdata = { - "fsl,imx23", - NULL, -}; +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 +#define MXS_CLKCTRL_RESET_CHIP (1 << 1) + +/* + * Reset the system. It is called by machine_restart(). + */ +static void mxs_restart(char mode, const char *cmd) +{ + struct device_node *np; + void __iomem *reset_addr; + + np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); + reset_addr = of_iomap(np, 0); + if (!reset_addr) + goto soft; + + if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) + reset_addr += MX23_CLKCTRL_RESET_OFFSET; + else + reset_addr += MX28_CLKCTRL_RESET_OFFSET; -static const char *imx28_dt_compat[] __initdata = { + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); + + pr_err("Failed to assert the chip reset\n"); + + /* Delay to allow the serial port to show the message */ + mdelay(50); + +soft: + /* We'll take a jump through zero as a poor second */ + soft_restart(0); +} + +static void __init mxs_timer_init(void) +{ + if (of_machine_is_compatible("fsl,imx23")) + mx23_clocks_init(); + else + mx28_clocks_init(); + clocksource_of_init(); +} + +static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", + "fsl,imx23", NULL, }; -DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") - .map_io = mx23_map_io, - .init_irq = icoll_init_irq, - .handle_irq = icoll_handle_irq, - .init_time = imx23_timer_init, - .init_machine = mxs_machine_init, - .dt_compat = imx23_dt_compat, - .restart = mxs_restart, -MACHINE_END - -DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") - .map_io = mx28_map_io, - .init_irq = icoll_init_irq, +DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, - .init_time = imx28_timer_init, + .init_time = mxs_timer_init, .init_machine = mxs_machine_init, - .dt_compat = imx28_dt_compat, + .dt_compat = mxs_dt_compat, .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c deleted file mode 100644 index e63b7d87acb..00000000000 --- a/arch/arm/mach-mxs/mm.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * - * Create static mapping between physical to virtual memory. - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/mach/map.h> - -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/common.h> - -/* - * Define the MX23 memory map. - */ -static struct map_desc mx23_io_desc[] __initdata = { - mxs_map_entry(MX23, OCRAM, MT_DEVICE), - mxs_map_entry(MX23, IO, MT_DEVICE), -}; - -/* - * Define the MX28 memory map. - */ -static struct map_desc mx28_io_desc[] __initdata = { - mxs_map_entry(MX28, OCRAM, MT_DEVICE), - mxs_map_entry(MX28, IO, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx23_map_io(void) -{ - iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); -} - -void __init mx28_map_io(void) -{ - iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); -} diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c deleted file mode 100644 index 1dff4670375..00000000000 --- a/arch/arm/mach-mxs/ocotp.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/mutex.h> - -#include <asm/processor.h> /* for cpu_relax() */ - -#include <mach/mxs.h> -#include <mach/common.h> - -#define OCOTP_WORD_OFFSET 0x20 -#define OCOTP_WORD_COUNT 0x20 - -#define BM_OCOTP_CTRL_BUSY (1 << 8) -#define BM_OCOTP_CTRL_ERROR (1 << 9) -#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) - -static DEFINE_MUTEX(ocotp_mutex); -static u32 ocotp_words[OCOTP_WORD_COUNT]; - -const u32 *mxs_get_ocotp(void) -{ - void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); - int timeout = 0x400; - size_t i; - static int once = 0; - - if (once) - return ocotp_words; - - mutex_lock(&ocotp_mutex); - - /* - * clk_enable(hbus_clk) for ocotp can be skipped - * as it must be on when system is running. - */ - - /* try to clear ERROR bit */ - __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); - - /* check both BUSY and ERROR cleared */ - while ((__raw_readl(ocotp_base) & - (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - /* open OCOTP banks for read */ - __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - /* approximately wait 32 hclk cycles */ - udelay(1); - - /* poll BUSY bit becoming cleared */ - timeout = 0x400; - while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - for (i = 0; i < OCOTP_WORD_COUNT; i++) - ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + - i * 0x10); - - /* close banks for power saving */ - __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - once = 1; - - mutex_unlock(&ocotp_mutex); - - return ocotp_words; - -error_unlock: - mutex_unlock(&ocotp_mutex); - pr_err("%s: timeout in reading OCOTP\n", __func__); - return NULL; -} diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c deleted file mode 100644 index 30042e23bfa..00000000000 --- a/arch/arm/mach-mxs/system.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/proc-fns.h> -#include <asm/system_misc.h> - -#include <mach/mxs.h> -#include <mach/common.h> - -#define MX23_CLKCTRL_RESET_OFFSET 0x120 -#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 -#define MXS_CLKCTRL_RESET_CHIP (1 << 1) - -#define MXS_MODULE_CLKGATE (1 << 30) -#define MXS_MODULE_SFTRST (1 << 31) - -static void __iomem *mxs_clkctrl_reset_addr; - -/* - * Reset the system. It is called by machine_restart(). - */ -void mxs_restart(char mode, const char *cmd) -{ - /* reset the chip */ - __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); - - pr_err("Failed to assert the chip reset\n"); - - /* Delay to allow the serial port to show the message */ - mdelay(50); - - /* We'll take a jump through zero as a poor second */ - soft_restart(0); -} - -static int __init mxs_arch_reset_init(void) -{ - struct clk *clk; - - mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + - (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET : - MX28_CLKCTRL_RESET_OFFSET); - - clk = clk_get_sys("rtc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - return 0; -} -core_initcall(mxs_arch_reset_init); - -/* - * Clear the bit and poll it cleared. This is usually called with - * a reset address and mask being either SFTRST(bit 31) or CLKGATE - * (bit 30). - */ -static int clear_poll_bit(void __iomem *addr, u32 mask) -{ - int timeout = 0x400; - - /* clear the bit */ - __mxs_clrl(mask, addr); - - /* - * SFTRST needs 3 GPMI clocks to settle, the reference manual - * recommends to wait 1us. - */ - udelay(1); - - /* poll the bit becoming clear */ - while ((__raw_readl(addr) & mask) && --timeout) - /* nothing */; - - return !timeout; -} - -int mxs_reset_block(void __iomem *reset_addr) -{ - int ret; - int timeout = 0x400; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear CLKGATE */ - __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr); - - /* set SFTRST to reset the block */ - __mxs_setl(MXS_MODULE_SFTRST, reset_addr); - udelay(1); - - /* poll CLKGATE becoming set */ - while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout) - /* nothing */; - if (unlikely(!timeout)) - goto error; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear and poll CLKGATE */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE); - if (unlikely(ret)) - goto error; - - return 0; - -error: - pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); - return -ETIMEDOUT; -} -EXPORT_SYMBOL(mxs_reset_block); diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h index da6345dab03..d05909c9671 100644 --- a/arch/arm/mach-omap1/dma.h +++ b/arch/arm/mach-omap1/dma.h @@ -21,21 +21,10 @@ /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 #define OMAP_DMA_MCBSP1_TX 8 #define OMAP_DMA_MCBSP1_RX 9 #define OMAP_DMA_MCBSP3_TX 10 #define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 #define OMAP_DMA_MCBSP2_TX 16 #define OMAP_DMA_MCBSP2_RX 17 #define OMAP_DMA_UART3_TX 18 @@ -43,41 +32,11 @@ #define OMAP_DMA_CAMERA_IF_RX 20 #define OMAP_DMA_MMC_TX 21 #define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 #define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 #define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 /* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 #define OMAP_DMA_MMC2_TX 54 #define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 #endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 0f0a97c1fcc..3662f4d4c8e 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1739,153 +1739,153 @@ DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops); static struct omap_clk omap2420_clks[] = { /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), + CLK(NULL, "func_32k_ck", &func_32k_ck), + CLK(NULL, "secure_32k_ck", &secure_32k_ck), + CLK(NULL, "osc_ck", &osc_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "alt_ck", &alt_ck), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_242X), + CLK(NULL, "dpll_ck", &dpll_ck), + CLK(NULL, "apll96_ck", &apll96_ck), + CLK(NULL, "apll54_ck", &apll54_ck), /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), + CLK(NULL, "func_54m_ck", &func_54m_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "func_96m_ck", &func_96m_ck), + CLK(NULL, "func_48m_ck", &func_48m_ck), + CLK(NULL, "func_12m_ck", &func_12m_ck), + CLK(NULL, "sys_clkout_src", &sys_clkout_src), + CLK(NULL, "sys_clkout", &sys_clkout), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src), + CLK(NULL, "sys_clkout2", &sys_clkout2), + CLK(NULL, "emul_ck", &emul_ck), /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_242X), + CLK(NULL, "mpu_ck", &mpu_ck), /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + CLK(NULL, "dsp_fck", &dsp_fck), + CLK(NULL, "dsp_ick", &dsp_ick), + CLK(NULL, "iva1_ifck", &iva1_ifck), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck), /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck), + CLK(NULL, "gfx_ick", &gfx_ick), /* DSS domain clocks */ - CLK("omapdss_dss", "ick", &dss_ick, CK_242X), - CLK(NULL, "dss_ick", &dss_ick, CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X), + CLK("omapdss_dss", "ick", &dss_ick), + CLK(NULL, "dss_ick", &dss_ick), + CLK(NULL, "dss1_fck", &dss1_fck), + CLK(NULL, "dss2_fck", &dss2_fck), + CLK(NULL, "dss_54m_fck", &dss_54m_fck), /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_242X), + CLK(NULL, "core_l3_ck", &core_l3_ck), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X), + CLK(NULL, "l4_ck", &l4_ck), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X), + CLK(NULL, "virt_prcm_set", &virt_prcm_set), /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X), - CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X), - CLK("omap24xxcam", "fck", &cam_fck, CK_242X), - CLK(NULL, "cam_fck", &cam_fck, CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_242X), - CLK(NULL, "cam_ick", &cam_ick, CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK(NULL, "mmc_ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "mmc_fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_242X), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_242X), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "des_ick", &des_ick, CK_242X), - CLK("omap-sham", "ick", &sha_ick, CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_242X), - CLK(NULL, "rng_ick", &rng_ick, CK_242X), - CLK("omap-aes", "ick", &aes_ick, CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_242X), - CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X), - CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpios_ick", &gpios_ick), + CLK(NULL, "gpios_fck", &gpios_fck), + CLK("omap_wdt", "ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck), + CLK(NULL, "sync_32k_ick", &sync_32k_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK("omap24xxcam", "fck", &cam_fck), + CLK(NULL, "cam_fck", &cam_fck), + CLK("omap24xxcam", "ick", &cam_ick), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "wdt4_ick", &wdt4_ick), + CLK(NULL, "wdt4_fck", &wdt4_fck), + CLK(NULL, "wdt3_ick", &wdt3_ick), + CLK(NULL, "wdt3_fck", &wdt3_fck), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK("mmci-omap.0", "ick", &mmc_ick), + CLK(NULL, "mmc_ick", &mmc_ick), + CLK("mmci-omap.0", "fck", &mmc_fck), + CLK(NULL, "mmc_fck", &mmc_fck), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "fac_fck", &fac_fck), + CLK(NULL, "eac_ick", &eac_ick), + CLK(NULL, "eac_fck", &eac_fck), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap_hdq.0", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "i2c1_fck", &i2c1_fck), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2c2_fck", &i2c2_fck), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "sdma_fck", &sdma_fck), + CLK(NULL, "sdma_ick", &sdma_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "vlynq_ick", &vlynq_ick), + CLK(NULL, "vlynq_fck", &vlynq_fck), + CLK(NULL, "des_ick", &des_ick), + CLK("omap-sham", "ick", &sha_ick), + CLK(NULL, "sha_ick", &sha_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "rng_ick", &rng_ick), + CLK("omap-aes", "ick", &aes_ick), + CLK(NULL, "aes_ick", &aes_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "usb_fck", &usb_fck), + CLK("musb-hdrc", "fck", &osc_ck), + CLK(NULL, "timer_32k_ck", &func_32k_ck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "timer_ext_ck", &alt_ck), + CLK(NULL, "cpufreq_ck", &virt_prcm_set), }; @@ -1904,8 +1904,6 @@ static const char *enable_init_clks[] = { int __init omap2420_clk_init(void) { - struct omap_clk *c; - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; @@ -1914,12 +1912,7 @@ int __init omap2420_clk_init(void) omap2xxx_clkt_vps_check_bootloader_rates(); - for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks); - c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } + omap_clocks_register(omap2420_clks, ARRAY_SIZE(omap2420_clks)); omap2xxx_clkt_vps_late_init(); diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index aed8f74ca07..bda353b2f7d 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -1840,168 +1840,168 @@ DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops); static struct omap_clk omap2430_clks[] = { /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X), - CLK("twl", "fck", &osc_ck, CK_243X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), + CLK(NULL, "func_32k_ck", &func_32k_ck), + CLK(NULL, "secure_32k_ck", &secure_32k_ck), + CLK(NULL, "osc_ck", &osc_ck), + CLK("twl", "fck", &osc_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "alt_ck", &alt_ck), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X), + CLK(NULL, "dpll_ck", &dpll_ck), + CLK(NULL, "apll96_ck", &apll96_ck), + CLK(NULL, "apll54_ck", &apll54_ck), /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), - CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X), - CLK(NULL, "emul_ck", &emul_ck, CK_243X), + CLK(NULL, "func_54m_ck", &func_54m_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "func_96m_ck", &func_96m_ck), + CLK(NULL, "func_48m_ck", &func_48m_ck), + CLK(NULL, "func_12m_ck", &func_12m_ck), + CLK(NULL, "sys_clkout_src", &sys_clkout_src), + CLK(NULL, "sys_clkout", &sys_clkout), + CLK(NULL, "emul_ck", &emul_ck), /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X), + CLK(NULL, "mpu_ck", &mpu_ck), /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "dsp_fck", &dsp_fck), + CLK(NULL, "iva2_1_ick", &iva2_1_ick), /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X), + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck), + CLK(NULL, "gfx_ick", &gfx_ick), /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + CLK(NULL, "mdm_ick", &mdm_ick), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck), /* DSS domain clocks */ - CLK("omapdss_dss", "ick", &dss_ick, CK_243X), - CLK(NULL, "dss_ick", &dss_ick, CK_243X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X), + CLK("omapdss_dss", "ick", &dss_ick), + CLK(NULL, "dss_ick", &dss_ick), + CLK(NULL, "dss1_fck", &dss1_fck), + CLK(NULL, "dss2_fck", &dss2_fck), + CLK(NULL, "dss_54m_fck", &dss_54m_fck), /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X), + CLK(NULL, "core_l3_ck", &core_l3_ck), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X), + CLK(NULL, "l4_ck", &l4_ck), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X), + CLK(NULL, "virt_prcm_set", &virt_prcm_set), /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X), - CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X), - CLK(NULL, "cam_fck", &cam_fck, CK_243X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X), - CLK(NULL, "cam_ick", &cam_ick, CK_243X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_243X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_243X), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X), - CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X), - CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X), - CLK("omap-sham", "ick", &sha_ick, CK_243X), - CLK("omap_rng", "ick", &rng_ick, CK_243X), - CLK(NULL, "rng_ick", &rng_ick, CK_243X), - CLK("omap-aes", "ick", &aes_ick, CK_243X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X), - CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X), - CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X), - CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X), - CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X), - CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X), - CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), - CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick), + CLK(NULL, "mcspi3_ick", &mcspi3_ick), + CLK(NULL, "mcspi3_fck", &mcspi3_fck), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpios_ick", &gpios_ick), + CLK(NULL, "gpios_fck", &gpios_fck), + CLK("omap_wdt", "ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck), + CLK(NULL, "sync_32k_ick", &sync_32k_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK(NULL, "icr_ick", &icr_ick), + CLK("omap24xxcam", "fck", &cam_fck), + CLK(NULL, "cam_fck", &cam_fck), + CLK("omap24xxcam", "ick", &cam_ick), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "wdt4_ick", &wdt4_ick), + CLK(NULL, "wdt4_fck", &wdt4_fck), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "fac_fck", &fac_fck), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap_hdq.1", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "i2chs1_fck", &i2chs1_fck), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2chs2_fck", &i2chs2_fck), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "sdma_fck", &sdma_fck), + CLK(NULL, "sdma_ick", &sdma_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "des_ick", &des_ick), + CLK("omap-sham", "ick", &sha_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "rng_ick", &rng_ick), + CLK("omap-aes", "ick", &aes_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "usb_fck", &usb_fck), + CLK("musb-omap2430", "ick", &usbhs_ick), + CLK(NULL, "usbhs_ick", &usbhs_ick), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick), + CLK(NULL, "mmchs1_ick", &mmchs1_ick), + CLK(NULL, "mmchs1_fck", &mmchs1_fck), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick), + CLK(NULL, "mmchs2_ick", &mmchs2_ick), + CLK(NULL, "mmchs2_fck", &mmchs2_fck), + CLK(NULL, "gpio5_ick", &gpio5_ick), + CLK(NULL, "gpio5_fck", &gpio5_fck), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick), + CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck), + CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck), + CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck), + CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck), + CLK(NULL, "timer_32k_ck", &func_32k_ck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "timer_ext_ck", &alt_ck), + CLK(NULL, "cpufreq_ck", &virt_prcm_set), }; static const char *enable_init_clks[] = { @@ -2019,8 +2019,6 @@ static const char *enable_init_clks[] = { int __init omap2430_clk_init(void) { - struct omap_clk *c; - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; @@ -2029,12 +2027,7 @@ int __init omap2430_clk_init(void) omap2xxx_clkt_vps_check_bootloader_rates(); - for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks); - c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } + omap_clocks_register(omap2430_clks, ARRAY_SIZE(omap2430_clks)); omap2xxx_clkt_vps_late_init(); diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b82066cb..dcc5bf57a26 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -838,80 +838,80 @@ DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops); * clkdev */ static struct omap_clk am33xx_clks[] = { - CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX), - CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX), - CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX), - CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX), - CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX), - CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX), - CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX), - CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX), - CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX), - CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX), - CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX), - CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX), - CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX), - CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX), - CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX), - CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck, CK_AM33XX), - CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX), - CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX), - CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX), - CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX), - CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX), - CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX), - CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), - CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX), - CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX), - CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), - CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), - CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), - CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), - CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), - CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX), - CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX), - CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX), - CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX), - CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX), - CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX), - CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX), - CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX), - CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX), - CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX), - CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX), - CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX), - CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX), - CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX), - CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX), - CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX), - CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX), - CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX), - CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX), - CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), - CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), - CLK(NULL, "clkout2_div_ck", &clkout2_div_ck, CK_AM33XX), - CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), - CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), + CLK(NULL, "clk_32768_ck", &clk_32768_ck), + CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_24000000_ck", &virt_24000000_ck), + CLK(NULL, "virt_25000000_ck", &virt_25000000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), + CLK(NULL, "tclkin_ck", &tclkin_ck), + CLK(NULL, "dpll_core_ck", &dpll_core_ck), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), + CLK("cpu0", NULL, &dpll_mpu_ck), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), + CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck), + CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck), + CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck), + CLK(NULL, "dpll_disp_ck", &dpll_disp_ck), + CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck), + CLK(NULL, "dpll_per_ck", &dpll_per_ck), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), + CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck), + CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck), + CLK(NULL, "adc_tsc_fck", &adc_tsc_fck), + CLK(NULL, "cefuse_fck", &cefuse_fck), + CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck), + CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick), + CLK(NULL, "dcan0_fck", &dcan0_fck), + CLK("481cc000.d_can", NULL, &dcan0_fck), + CLK(NULL, "dcan1_fck", &dcan1_fck), + CLK("481d0000.d_can", NULL, &dcan1_fck), + CLK(NULL, "debugss_ick", &debugss_ick), + CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk), + CLK(NULL, "mcasp0_fck", &mcasp0_fck), + CLK(NULL, "mcasp1_fck", &mcasp1_fck), + CLK(NULL, "mmu_fck", &mmu_fck), + CLK(NULL, "smartreflex0_fck", &smartreflex0_fck), + CLK(NULL, "smartreflex1_fck", &smartreflex1_fck), + CLK(NULL, "timer1_fck", &timer1_fck), + CLK(NULL, "timer2_fck", &timer2_fck), + CLK(NULL, "timer3_fck", &timer3_fck), + CLK(NULL, "timer4_fck", &timer4_fck), + CLK(NULL, "timer5_fck", &timer5_fck), + CLK(NULL, "timer6_fck", &timer6_fck), + CLK(NULL, "timer7_fck", &timer7_fck), + CLK(NULL, "usbotg_fck", &usbotg_fck), + CLK(NULL, "ieee5000_fck", &ieee5000_fck), + CLK(NULL, "wdt1_fck", &wdt1_fck), + CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk), + CLK(NULL, "l3_gclk", &l3_gclk), + CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck), + CLK(NULL, "l4hs_gclk", &l4hs_gclk), + CLK(NULL, "l3s_gclk", &l3s_gclk), + CLK(NULL, "l4fw_gclk", &l4fw_gclk), + CLK(NULL, "l4ls_gclk", &l4ls_gclk), + CLK(NULL, "clk_24mhz", &clk_24mhz), + CLK(NULL, "sysclk_div_ck", &sysclk_div_ck), + CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk), + CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk), + CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck), + CLK(NULL, "gpio0_dbclk", &gpio0_dbclk), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), + CLK(NULL, "lcd_gclk", &lcd_gclk), + CLK(NULL, "mmc_clk", &mmc_clk), + CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck), + CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck), + CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck), + CLK(NULL, "clkout2_div_ck", &clkout2_div_ck), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck), }; @@ -926,21 +926,10 @@ static const char *enable_init_clks[] = { int __init am33xx_clk_init(void) { - struct omap_clk *c; - u32 cpu_clkflg; - - if (soc_is_am33xx()) { + if (soc_is_am33xx()) cpu_mask = RATE_IN_AM33XX; - cpu_clkflg = CK_AM33XX; - } - - for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) { - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - } + + omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks)); omap2_clk_disable_autoidle_all(); diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 4579c3c5338..438d13341e2 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3219,289 +3219,325 @@ static struct clk_hw_omap wdt3_ick_hw = { DEFINE_STRUCT_CLK(wdt3_ick, gpio2_ick_parent_names, aes2_ick_ops); /* - * clkdev + * clocks specific to omap3430es1 + */ +static struct omap_clk omap3430es1_clks[] = { + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck), + CLK(NULL, "fshostusb_fck", &fshostusb_fck), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1), + CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1), + CLK("omapdss_dss", "ick", &dss_ick_3430es1), + CLK(NULL, "dss_ick", &dss_ick_3430es1), +}; + +/* + * clocks specific to am35xx + */ +static struct omap_clk am35xx_clks[] = { + CLK(NULL, "ipss_ick", &ipss_ick), + CLK(NULL, "rmii_ck", &rmii_ck), + CLK(NULL, "pclk_ck", &pclk_ck), + CLK(NULL, "emac_ick", &emac_ick), + CLK(NULL, "emac_fck", &emac_fck), + CLK("davinci_emac.0", NULL, &emac_ick), + CLK("davinci_mdio.0", NULL, &emac_fck), + CLK("vpfe-capture", "master", &vpfe_ick), + CLK("vpfe-capture", "slave", &vpfe_fck), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx), + CLK(NULL, "hecc_ck", &hecc_ck), + CLK(NULL, "uart4_ick", &uart4_ick_am35xx), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx), +}; + +/* + * clocks specific to omap36xx + */ +static struct omap_clk omap36xx_clks[] = { + CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck), + CLK(NULL, "uart4_fck", &uart4_fck), +}; + +/* + * clocks common to omap36xx omap34xx + */ +static struct omap_clk omap34xx_omap36xx_clks[] = { + CLK(NULL, "aes1_ick", &aes1_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "sha11_ick", &sha11_ick), + CLK(NULL, "des1_ick", &des1_ick), + CLK(NULL, "cam_mclk", &cam_mclk), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck), + CLK(NULL, "security_l3_ick", &security_l3_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "icr_ick", &icr_ick), + CLK("omap-aes", "ick", &aes2_ick), + CLK("omap-sham", "ick", &sha12_ick), + CLK(NULL, "des2_ick", &des2_ick), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), + CLK(NULL, "sr1_fck", &sr1_fck), + CLK(NULL, "sr2_fck", &sr2_fck), + CLK(NULL, "sr_l4_ick", &sr_l4_ick), + CLK(NULL, "security_l4_ick2", &security_l4_ick2), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick), + CLK(NULL, "dpll2_fck", &dpll2_fck), + CLK(NULL, "iva2_ck", &iva2_ck), + CLK(NULL, "modem_fck", &modem_fck), + CLK(NULL, "sad2d_ick", &sad2d_ick), + CLK(NULL, "mad2d_ick", &mad2d_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK(NULL, "dpll2_ck", &dpll2_ck), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck), +}; + +/* + * clocks common to omap36xx and omap3430es2plus + */ +static struct omap_clk omap36xx_omap3430es2plus_clks[] = { + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2), + CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2), + CLK(NULL, "usim_fck", &usim_fck), + CLK(NULL, "usim_ick", &usim_ick), +}; + +/* + * clocks common to am35xx omap36xx and omap3430es2plus + */ +static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = { + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck), + CLK(NULL, "dpll5_ck", &dpll5_ck), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck), + CLK(NULL, "sgx_fck", &sgx_fck), + CLK(NULL, "sgx_ick", &sgx_ick), + CLK(NULL, "cpefuse_fck", &cpefuse_fck), + CLK(NULL, "ts_fck", &ts_fck), + CLK(NULL, "usbtll_fck", &usbtll_fck), + CLK("usbhs_omap", "usbtll_fck", &usbtll_fck), + CLK("usbhs_tll", "usbtll_fck", &usbtll_fck), + CLK(NULL, "usbtll_ick", &usbtll_ick), + CLK("usbhs_omap", "usbtll_ick", &usbtll_ick), + CLK("usbhs_tll", "usbtll_ick", &usbtll_ick), + CLK("omap_hsmmc.2", "ick", &mmchs3_ick), + CLK(NULL, "mmchs3_ick", &mmchs3_ick), + CLK(NULL, "mmchs3_fck", &mmchs3_fck), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2), + CLK("omapdss_dss", "ick", &dss_ick_3430es2), + CLK(NULL, "dss_ick", &dss_ick_3430es2), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck), + CLK(NULL, "usbhost_ick", &usbhost_ick), + CLK("usbhs_omap", "usbhost_ick", &usbhost_ick), +}; + +/* + * common clocks */ static struct omap_clk omap3xxx_clks[] = { - CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX), - CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX), - CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), - CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX), - CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), - CLK("twl", "fck", &osc_sys_ck, CK_3XXX), - CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), - CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), - CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), - CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_3XXX), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX), - CLK(NULL, "dpll2_ck", &dpll2_ck, CK_34XX | CK_36XX), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_34XX | CK_36XX), - CLK(NULL, "dpll3_ck", &dpll3_ck, CK_3XXX), - CLK(NULL, "core_ck", &core_ck, CK_3XXX), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_3XXX), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_3XXX), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX), - CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX), - CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX), - CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX), - CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX), - CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX), - CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_3XXX), - CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_3XXX), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_3XXX), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_3XXX), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_3XXX), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_3XXX), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX), - CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_3XXX), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_3XXX), - CLK(NULL, "corex2_fck", &corex2_fck, CK_3XXX), - CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX), - CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX), - CLK(NULL, "arm_fck", &arm_fck, CK_3XXX), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX), - CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX), - CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX), - CLK(NULL, "l3_ick", &l3_ick, CK_3XXX), - CLK(NULL, "l4_ick", &l4_ick, CK_3XXX), - CLK(NULL, "rm_ick", &rm_ick, CK_3XXX), - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), - CLK(NULL, "modem_fck", &modem_fck, CK_34XX | CK_36XX), - CLK(NULL, "sad2d_ick", &sad2d_ick, CK_34XX | CK_36XX), - CLK(NULL, "mad2d_ick", &mad2d_ick, CK_34XX | CK_36XX), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_3XXX), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_3XXX), - CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), - CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), - CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX), - CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_3XXX), - CLK(NULL, "i2c3_fck", &i2c3_fck, CK_3XXX), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_3XXX), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_3XXX), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_3XXX), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_3XXX), - CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX), - CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_3XXX), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_3XXX), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_3XXX), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_3XXX), - CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX), - CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX), - CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), - CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX), - CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX), - CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX), - CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), - CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), - CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), - CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), - CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX), - CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX), - CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX), - CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX), - CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX), - CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX), - CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX), - CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX), - CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX), - CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX), - CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX), - CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX), - CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), - CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_34XX | CK_36XX), - CLK(NULL, "aes1_ick", &aes1_ick, CK_34XX | CK_36XX), - CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), - CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), - CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_3XXX), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX), - CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), - CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX), - CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), - CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX), - CLK(NULL, "wdt2_fck", &wdt2_fck, CK_3XXX), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX), - CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX), - CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), - CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), - CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), - CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), - CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_AM35XX), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_3XXX), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_3XXX), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_3XXX), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_3XXX), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_3XXX), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX), - CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_3XXX), - CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_3XXX), - CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_3XXX), - CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_3XXX), - CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_3XXX), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_3XXX), - CLK(NULL, "per_l4_ick", &per_l4_ick, CK_3XXX), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_3XXX), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_3XXX), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_3XXX), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_3XXX), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX), - CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX), - CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_3XXX), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_3XXX), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_3XXX), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_3XXX), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_3XXX), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX), - CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX), - CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX), - CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX), - CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX), - CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX), - CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX), - CLK(NULL, "atclk_fck", &atclk_fck, CK_3XXX), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_3XXX), - CLK(NULL, "traceclk_fck", &traceclk_fck, CK_3XXX), - CLK(NULL, "sr1_fck", &sr1_fck, CK_34XX | CK_36XX), - CLK(NULL, "sr2_fck", &sr2_fck, CK_34XX | CK_36XX), - CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX), - CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), - CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), - CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX), - CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX), - CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), - CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), - CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), - CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), - CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), - CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX), - CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX), + CLK(NULL, "apb_pclk", &dummy_apb_pclk), + CLK(NULL, "omap_32k_fck", &omap_32k_fck), + CLK(NULL, "virt_12m_ck", &virt_12m_ck), + CLK(NULL, "virt_13m_ck", &virt_13m_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck), + CLK(NULL, "osc_sys_ck", &osc_sys_ck), + CLK("twl", "fck", &osc_sys_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck), + CLK(NULL, "sys_altclk", &sys_altclk), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), + CLK(NULL, "sys_clkout1", &sys_clkout1), + CLK(NULL, "dpll1_ck", &dpll1_ck), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck), + CLK(NULL, "dpll3_ck", &dpll3_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck), + CLK(NULL, "dpll4_ck", &dpll4_ck), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck), + CLK(NULL, "omap_96m_fck", &omap_96m_fck), + CLK(NULL, "cm_96m_fck", &cm_96m_fck), + CLK(NULL, "omap_54m_fck", &omap_54m_fck), + CLK(NULL, "omap_48m_fck", &omap_48m_fck), + CLK(NULL, "omap_12m_fck", &omap_12m_fck), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck), + CLK(NULL, "sys_clkout2", &sys_clkout2), + CLK(NULL, "corex2_fck", &corex2_fck), + CLK(NULL, "dpll1_fck", &dpll1_fck), + CLK(NULL, "mpu_ck", &mpu_ck), + CLK(NULL, "arm_fck", &arm_fck), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck), + CLK(NULL, "l3_ick", &l3_ick), + CLK(NULL, "l4_ick", &l4_ick), + CLK(NULL, "rm_ick", &rm_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "core_96m_fck", &core_96m_fck), + CLK(NULL, "mmchs2_fck", &mmchs2_fck), + CLK(NULL, "mmchs1_fck", &mmchs1_fck), + CLK(NULL, "i2c3_fck", &i2c3_fck), + CLK(NULL, "i2c2_fck", &i2c2_fck), + CLK(NULL, "i2c1_fck", &i2c1_fck), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK(NULL, "core_48m_fck", &core_48m_fck), + CLK(NULL, "mcspi4_fck", &mcspi4_fck), + CLK(NULL, "mcspi3_fck", &mcspi3_fck), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "core_12m_fck", &core_12m_fck), + CLK("omap_hdq.0", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK(NULL, "core_l3_ick", &core_l3_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "core_l4_ick", &core_l4_ick), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick), + CLK(NULL, "mmchs2_ick", &mmchs2_ick), + CLK(NULL, "mmchs1_ick", &mmchs1_ick), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi4_ick", &mcspi4_ick), + CLK(NULL, "mcspi3_ick", &mcspi3_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK("omap_i2c.3", "ick", &i2c3_ick), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c3_ick", &i2c3_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK(NULL, "dss_tv_fck", &dss_tv_fck), + CLK(NULL, "dss_96m_fck", &dss_96m_fck), + CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck), + CLK(NULL, "utmi_p1_gfclk", &dummy_ck), + CLK(NULL, "utmi_p2_gfclk", &dummy_ck), + CLK(NULL, "xclk60mhsp1_ck", &dummy_ck), + CLK(NULL, "xclk60mhsp2_ck", &dummy_ck), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck), + CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck), + CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck), + CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck), + CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck), + CLK(NULL, "init_60m_fclk", &dummy_ck), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck), + CLK(NULL, "gpio1_dbck", &gpio1_dbck), + CLK(NULL, "wdt2_fck", &wdt2_fck), + CLK("omap_wdt", "ick", &wdt2_ick), + CLK(NULL, "wdt2_ick", &wdt2_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "gpio1_ick", &gpio1_ick), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "per_96m_fck", &per_96m_fck), + CLK(NULL, "per_48m_fck", &per_48m_fck), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck), + CLK(NULL, "gpio6_dbck", &gpio6_dbck), + CLK(NULL, "gpio5_dbck", &gpio5_dbck), + CLK(NULL, "gpio4_dbck", &gpio4_dbck), + CLK(NULL, "gpio3_dbck", &gpio3_dbck), + CLK(NULL, "gpio2_dbck", &gpio2_dbck), + CLK(NULL, "wdt3_fck", &wdt3_fck), + CLK(NULL, "per_l4_ick", &per_l4_ick), + CLK(NULL, "gpio6_ick", &gpio6_ick), + CLK(NULL, "gpio5_ick", &gpio5_ick), + CLK(NULL, "gpio4_ick", &gpio4_ick), + CLK(NULL, "gpio3_ick", &gpio3_ick), + CLK(NULL, "gpio2_ick", &gpio2_ick), + CLK(NULL, "wdt3_ick", &wdt3_ick), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart4_ick", &uart4_ick), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp4_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), + CLK("etb", "emu_src_ck", &emu_src_ck), + CLK(NULL, "emu_src_ck", &emu_src_ck), + CLK(NULL, "pclk_fck", &pclk_fck), + CLK(NULL, "pclkx2_fck", &pclkx2_fck), + CLK(NULL, "atclk_fck", &atclk_fck), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck), + CLK(NULL, "traceclk_fck", &traceclk_fck), + CLK(NULL, "secure_32k_fck", &secure_32k_fck), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK(NULL, "wdt1_fck", &wdt1_fck), + CLK(NULL, "timer_32k_ck", &omap_32k_fck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "cpufreq_ck", &dpll1_ck), }; static const char *enable_init_clks[] = { @@ -3512,8 +3548,27 @@ static const char *enable_init_clks[] = { int __init omap3xxx_clk_init(void) { - struct omap_clk *c; - u32 cpu_clkflg = 0; + if (omap3_has_192mhz_clk()) + omap_96m_alwon_fck = omap_96m_alwon_fck_3630; + + if (cpu_is_omap3630()) { + dpll3_m3x2_ck = dpll3_m3x2_ck_3630; + dpll4_m2x2_ck = dpll4_m2x2_ck_3630; + dpll4_m3x2_ck = dpll4_m3x2_ck_3630; + dpll4_m4x2_ck = dpll4_m4x2_ck_3630; + dpll4_m5x2_ck = dpll4_m5x2_ck_3630; + dpll4_m6x2_ck = dpll4_m6x2_ck_3630; + } + + /* + * XXX This type of dynamic rewriting of the clock tree is + * deprecated and should be revised soon. + */ + if (cpu_is_omap3630()) + dpll4_dd = dpll4_dd_3630; + else + dpll4_dd = dpll4_dd_34xx; + /* * 3505 must be tested before 3517, since 3517 returns true @@ -3523,13 +3578,20 @@ int __init omap3xxx_clk_init(void) */ if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; - cpu_clkflg = CK_AM35XX; + omap_clocks_register(am35xx_clks, ARRAY_SIZE(am35xx_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); } else if (cpu_is_omap3630()) { cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); - cpu_clkflg = CK_36XX; - } else if (cpu_is_ti816x()) { - cpu_mask = RATE_IN_TI816X; - cpu_clkflg = CK_TI816X; + omap_clocks_register(omap36xx_clks, ARRAY_SIZE(omap36xx_clks)); + omap_clocks_register(omap36xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); } else if (soc_is_am33xx()) { cpu_mask = RATE_IN_AM33XX; } else if (cpu_is_ti814x()) { @@ -3537,49 +3599,32 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; - cpu_clkflg = CK_3430ES1; + omap_clocks_register(omap3430es1_clks, + ARRAY_SIZE(omap3430es1_clks)); + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap3xxx_clks, + ARRAY_SIZE(omap3xxx_clks)); } else { /* * Assume that anything that we haven't matched yet * has 3430ES2-type clocks. */ cpu_mask = RATE_IN_3430ES2PLUS; - cpu_clkflg = CK_3430ES2PLUS; + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap36xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, + ARRAY_SIZE(omap3xxx_clks)); } } else { WARN(1, "clock: could not identify OMAP3 variant\n"); } - if (omap3_has_192mhz_clk()) - omap_96m_alwon_fck = omap_96m_alwon_fck_3630; - - if (cpu_is_omap3630()) { - dpll3_m3x2_ck = dpll3_m3x2_ck_3630; - dpll4_m2x2_ck = dpll4_m2x2_ck_3630; - dpll4_m3x2_ck = dpll4_m3x2_ck_3630; - dpll4_m4x2_ck = dpll4_m4x2_ck_3630; - dpll4_m5x2_ck = dpll4_m5x2_ck_3630; - dpll4_m6x2_ck = dpll4_m6x2_ck_3630; - } - - /* - * XXX This type of dynamic rewriting of the clock tree is - * deprecated and should be revised soon. - */ - if (cpu_is_omap3630()) - dpll4_dd = dpll4_dd_3630; - else - dpll4_dd = dpll4_dd_34xx; - - for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); - c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - - omap2_clk_disable_autoidle_all(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 0c6834ae1fc..88e37a47433 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -1424,284 +1424,285 @@ DEFINE_CLK_MUX(auxclkreq5_ck, auxclkreq_ck_parents, NULL, 0x0, 0x0, NULL); /* - * clkdev + * clocks specific to omap4460 */ +static struct omap_clk omap446x_clks[] = { + CLK(NULL, "div_ts_ck", &div_ts_ck), + CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk), +}; + +/* + * clocks specific to omap4430 + */ +static struct omap_clk omap443x_clks[] = { + CLK(NULL, "bandgap_fclk", &bandgap_fclk), +}; +/* + * clocks common to omap44xx + */ static struct omap_clk omap44xx_clks[] = { - CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X), - CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck, CK_443X), - CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X), - CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X), - CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X), - CLK(NULL, "slimbus_src_clk", &slimbus_src_clk, CK_443X), - CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X), - CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X), - CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X), - CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X), - CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X), - CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), - CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), - CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), - CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck, CK_443X), - CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), - CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), - CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), - CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), - CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck, CK_443X), - CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), - CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), - CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck, CK_443X), - CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), - CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X), - CLK(NULL, "abe_clk", &abe_clk, CK_443X), - CLK(NULL, "aess_fclk", &aess_fclk, CK_443X), - CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck, CK_443X), - CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X), - CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_443X), - CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck, CK_443X), - CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X), - CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X), - CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X), - CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, CK_443X), - CLK(NULL, "div_core_ck", &div_core_ck, CK_443X), - CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X), - CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X), - CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck, CK_443X), - CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X), - CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X), - CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck, CK_443X), - CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck, CK_443X), - CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X), - CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck, CK_443X), - CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck, CK_443X), - CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, CK_443X), - CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X), - CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X), - CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X), - CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X), - CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X), - CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck, CK_443X), - CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X), - CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck, CK_443X), - CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, CK_443X), - CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, CK_443X), - CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck, CK_443X), - CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck, CK_443X), - CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), - CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), - CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), - CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X), - CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X), - CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X), - CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X), - CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X), - CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X), - CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), - CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), - CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), - CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), - CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), - CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), - CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), - CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), - CLK("smp_twd", NULL, &mpu_periphclk, CK_443X), - CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), - CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), - CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), - CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), - CLK(NULL, "aes1_fck", &aes1_fck, CK_443X), - CLK(NULL, "aes2_fck", &aes2_fck, CK_443X), - CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X), - CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X), - CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X), - CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), - CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk, CK_443X), - CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), - CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), - CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), - CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), - CLK(NULL, "dss_fck", &dss_fck, CK_443X), - CLK("omapdss_dss", "ick", &dss_fck, CK_443X), - CLK(NULL, "fdif_fck", &fdif_fck, CK_443X), - CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_443X), - CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_443X), - CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_443X), - CLK(NULL, "gpio4_dbclk", &gpio4_dbclk, CK_443X), - CLK(NULL, "gpio5_dbclk", &gpio5_dbclk, CK_443X), - CLK(NULL, "gpio6_dbclk", &gpio6_dbclk, CK_443X), - CLK(NULL, "sgx_clk_mux", &sgx_clk_mux, CK_443X), - CLK(NULL, "hsi_fck", &hsi_fck, CK_443X), - CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X), - CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk, CK_443X), - CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk, CK_443X), - CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk, CK_443X), - CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk, CK_443X), - CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), - CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), - CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), - CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), - CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), - CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), - CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), - CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), - CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X), - CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X), - CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X), - CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X), - CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X), - CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), - CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), - CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), - CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux, CK_443X), - CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux, CK_443X), - CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux, CK_443X), - CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux, CK_443X), - CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux, CK_443X), - CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux, CK_443X), - CLK(NULL, "timer5_sync_mux", &timer5_sync_mux, CK_443X), - CLK(NULL, "timer6_sync_mux", &timer6_sync_mux, CK_443X), - CLK(NULL, "timer7_sync_mux", &timer7_sync_mux, CK_443X), - CLK(NULL, "timer8_sync_mux", &timer8_sync_mux, CK_443X), - CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux, CK_443X), - CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), - CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), - CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), - CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), - CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), - CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X), - CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), - CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK(NULL, "usim_ck", &usim_ck, CK_443X), - CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), - CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), - CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), - CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), - CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), - CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck, CK_443X), - CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X), - CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X), - CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck, CK_443X), - CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X), - CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X), - CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck, CK_443X), - CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X), - CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X), - CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck, CK_443X), - CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X), - CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X), - CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck, CK_443X), - CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X), - CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X), - CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), - CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), - CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), - CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.4", "ick", &dummy_ck, CK_443X), - CLK(NULL, "mailboxes_ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.0", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.1", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.2", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.3", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.4", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), - CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), - CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), - CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), - CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X), - CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), + CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck), + CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck), + CLK(NULL, "pad_clks_ck", &pad_clks_ck), + CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck), + CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck), + CLK(NULL, "slimbus_src_clk", &slimbus_src_clk), + CLK(NULL, "slimbus_clk", &slimbus_clk), + CLK(NULL, "sys_32k_ck", &sys_32k_ck), + CLK(NULL, "virt_12000000_ck", &virt_12000000_ck), + CLK(NULL, "virt_13000000_ck", &virt_13000000_ck), + CLK(NULL, "virt_16800000_ck", &virt_16800000_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "virt_27000000_ck", &virt_27000000_ck), + CLK(NULL, "virt_38400000_ck", &virt_38400000_ck), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), + CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck), + CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck), + CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck), + CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck), + CLK(NULL, "xclk60motg_ck", &xclk60motg_ck), + CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck), + CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck), + CLK(NULL, "dpll_abe_ck", &dpll_abe_ck), + CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck), + CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck), + CLK(NULL, "abe_24m_fclk", &abe_24m_fclk), + CLK(NULL, "abe_clk", &abe_clk), + CLK(NULL, "aess_fclk", &aess_fclk), + CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck), + CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_core_ck", &dpll_core_ck), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), + CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck), + CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck), + CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck), + CLK(NULL, "ddrphy_ck", &ddrphy_ck), + CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck), + CLK(NULL, "div_core_ck", &div_core_ck), + CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk), + CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk), + CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck), + CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck), + CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck), + CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck), + CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck), + CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_iva_ck", &dpll_iva_ck), + CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck), + CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck), + CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), + CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck), + CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_per_ck", &dpll_per_ck), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), + CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck), + CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck), + CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck), + CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck), + CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck), + CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck), + CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck), + CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck), + CLK(NULL, "dpll_usb_ck", &dpll_usb_ck), + CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck), + CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck), + CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck), + CLK(NULL, "func_12m_fclk", &func_12m_fclk), + CLK(NULL, "func_24m_clk", &func_24m_clk), + CLK(NULL, "func_24mc_fclk", &func_24mc_fclk), + CLK(NULL, "func_48m_fclk", &func_48m_fclk), + CLK(NULL, "func_48mc_fclk", &func_48mc_fclk), + CLK(NULL, "func_64m_fclk", &func_64m_fclk), + CLK(NULL, "func_96m_fclk", &func_96m_fclk), + CLK(NULL, "init_60m_fclk", &init_60m_fclk), + CLK(NULL, "l3_div_ck", &l3_div_ck), + CLK(NULL, "l4_div_ck", &l4_div_ck), + CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck), + CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck), + CLK("smp_twd", NULL, &mpu_periphclk), + CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk), + CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk), + CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck), + CLK(NULL, "aes1_fck", &aes1_fck), + CLK(NULL, "aes2_fck", &aes2_fck), + CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck), + CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk), + CLK(NULL, "dss_sys_clk", &dss_sys_clk), + CLK(NULL, "dss_tv_clk", &dss_tv_clk), + CLK(NULL, "dss_dss_clk", &dss_dss_clk), + CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk), + CLK(NULL, "dss_fck", &dss_fck), + CLK("omapdss_dss", "ick", &dss_fck), + CLK(NULL, "fdif_fck", &fdif_fck), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), + CLK(NULL, "gpio4_dbclk", &gpio4_dbclk), + CLK(NULL, "gpio5_dbclk", &gpio5_dbclk), + CLK(NULL, "gpio6_dbclk", &gpio6_dbclk), + CLK(NULL, "sgx_clk_mux", &sgx_clk_mux), + CLK(NULL, "hsi_fck", &hsi_fck), + CLK(NULL, "iss_ctrlclk", &iss_ctrlclk), + CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck), + CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk), + CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck), + CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk), + CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck), + CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk), + CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck), + CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk), + CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck), + CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk), + CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk), + CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m), + CLK(NULL, "sha2md5_fck", &sha2md5_fck), + CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1), + CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0), + CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2), + CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk), + CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1), + CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0), + CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk), + CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck), + CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck), + CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck), + CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux), + CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux), + CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux), + CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux), + CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux), + CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux), + CLK(NULL, "timer5_sync_mux", &timer5_sync_mux), + CLK(NULL, "timer6_sync_mux", &timer6_sync_mux), + CLK(NULL, "timer7_sync_mux", &timer7_sync_mux), + CLK(NULL, "timer8_sync_mux", &timer8_sync_mux), + CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux), + CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck), + CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck), + CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk), + CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk), + CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk), + CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk), + CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk), + CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk), + CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk), + CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk), + CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck), + CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck), + CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk), + CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk), + CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick), + CLK("musb-omap2430", "ick", &usb_otg_hs_ick), + CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k), + CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk), + CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk), + CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk), + CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick), + CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick), + CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick), + CLK(NULL, "usim_ck", &usim_ck), + CLK(NULL, "usim_fclk", &usim_fclk), + CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck), + CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck), + CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck), + CLK(NULL, "auxclk0_ck", &auxclk0_ck), + CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck), + CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck), + CLK(NULL, "auxclk1_ck", &auxclk1_ck), + CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck), + CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck), + CLK(NULL, "auxclk2_ck", &auxclk2_ck), + CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck), + CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck), + CLK(NULL, "auxclk3_ck", &auxclk3_ck), + CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck), + CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck), + CLK(NULL, "auxclk4_ck", &auxclk4_ck), + CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck), + CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck), + CLK(NULL, "auxclk5_ck", &auxclk5_ck), + CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck), + CLK("omap-gpmc", "fck", &dummy_ck), + CLK("omap_i2c.1", "ick", &dummy_ck), + CLK("omap_i2c.2", "ick", &dummy_ck), + CLK("omap_i2c.3", "ick", &dummy_ck), + CLK("omap_i2c.4", "ick", &dummy_ck), + CLK(NULL, "mailboxes_ick", &dummy_ck), + CLK("omap_hsmmc.0", "ick", &dummy_ck), + CLK("omap_hsmmc.1", "ick", &dummy_ck), + CLK("omap_hsmmc.2", "ick", &dummy_ck), + CLK("omap_hsmmc.3", "ick", &dummy_ck), + CLK("omap_hsmmc.4", "ick", &dummy_ck), + CLK("omap-mcbsp.1", "ick", &dummy_ck), + CLK("omap-mcbsp.2", "ick", &dummy_ck), + CLK("omap-mcbsp.3", "ick", &dummy_ck), + CLK("omap-mcbsp.4", "ick", &dummy_ck), + CLK("omap2_mcspi.1", "ick", &dummy_ck), + CLK("omap2_mcspi.2", "ick", &dummy_ck), + CLK("omap2_mcspi.3", "ick", &dummy_ck), + CLK("omap2_mcspi.4", "ick", &dummy_ck), + CLK(NULL, "uart1_ick", &dummy_ck), + CLK(NULL, "uart2_ick", &dummy_ck), + CLK(NULL, "uart3_ick", &dummy_ck), + CLK(NULL, "uart4_ick", &dummy_ck), + CLK("usbhs_omap", "usbhost_ick", &dummy_ck), + CLK("usbhs_omap", "usbtll_fck", &dummy_ck), + CLK("usbhs_tll", "usbtll_fck", &dummy_ck), + CLK("omap_wdt", "ick", &dummy_ck), + CLK(NULL, "timer_32k_ck", &sys_32k_ck), /* TODO: Remove "omap_timer.X" aliases once DT migration is complete */ - CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), + CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck), + CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK(NULL, "cpufreq_ck", &dpll_mpu_ck), }; int __init omap4xxx_clk_init(void) { - u32 cpu_clkflg; - struct omap_clk *c; int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; - cpu_clkflg = CK_443X; + omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks)); } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; - cpu_clkflg = CK_446X | CK_443X; - + omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks)); if (cpu_is_omap447x()) pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } - for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); - c++) { - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - } + omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks)); omap2_clk_disable_autoidle_all(); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index e4ec3a69ee2..8474c7d228e 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -23,7 +23,7 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> - +#include <linux/clk-private.h> #include <asm/cpu.h> @@ -569,6 +569,21 @@ const struct clk_hw_omap_ops clkhwops_wait = { }; /** + * omap_clocks_register - register an array of omap_clk + * @ocs: pointer to an array of omap_clk to register + */ +void __init omap_clocks_register(struct omap_clk oclks[], int cnt) +{ + struct omap_clk *c; + + for (c = oclks; c < oclks + cnt; c++) { + clkdev_add(&c->lk); + if (!__clk_init(NULL, c->lk.clk)) + omap2_init_clk_hw_omap_clocks(c->lk.clk); + } +} + +/** * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument * @mpurate_ck_name: clk name of the clock to change rate * diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 60ddd8612b4..7aa32cd292f 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -27,9 +27,8 @@ struct omap_clk { struct clk_lookup lk; }; -#define CLK(dev, con, ck, cp) \ +#define CLK(dev, con, ck) \ { \ - .cpu = cp, \ .lk = { \ .dev_id = dev, \ .con_id = con, \ @@ -37,22 +36,6 @@ struct omap_clk { }, \ } -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_242X (1 << 0) -#define CK_243X (1 << 1) /* 243x, 253x */ -#define CK_3430ES1 (1 << 2) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 4) /* Sitara AM35xx */ -#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 6) -#define CK_TI816X (1 << 7) -#define CK_446X (1 << 8) -#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - struct clockdomain; #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) @@ -480,4 +463,5 @@ extern int am33xx_clk_init(void); extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); +extern void omap_clocks_register(struct omap_clk *oclks, int cnt); #endif diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 80392fca86c..06f567faf99 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -107,8 +107,6 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, { struct omap3_idle_statedata *cx = &omap3_idle_data[index]; - local_fiq_disable(); - if (omap_irq_pending() || need_resched()) goto return_sleep_time; @@ -143,7 +141,6 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); return_sleep_time: - local_fiq_enable(); return index; } diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index d639aef0ded..9de47a70628 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -70,10 +70,7 @@ static int omap4_enter_idle_simple(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - local_fiq_disable(); omap_do_wfi(); - local_fiq_enable(); - return index; } @@ -84,8 +81,6 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, struct omap4_idle_statedata *cx = &omap4_idle_data[index]; int cpu_id = smp_processor_id(); - local_fiq_disable(); - /* * CPU0 has to wait and stay ON until CPU1 is OFF state. * This is necessary to honour hardware recommondation @@ -136,6 +131,7 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, /* Wakeup CPU1 only if it is not offlined */ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { clkdm_wakeup(cpu_clkdm[1]); + omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON); clkdm_allow_idle(cpu_clkdm[1]); } @@ -158,8 +154,6 @@ fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); cpu_done[dev->cpu] = false; - local_fiq_enable(); - return index; } diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h index eba80dbc521..65f80cacf17 100644 --- a/arch/arm/mach-omap2/dma.h +++ b/arch/arm/mach-omap2/dma.h @@ -22,69 +22,20 @@ /* DMA channels for 24xx */ #define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ #define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ #define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ #define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ #define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ #define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ #define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ #define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ #define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ #define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ #define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ #define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ #define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ #define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ #define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ #define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ #define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ #define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ @@ -93,33 +44,12 @@ #define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ #define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ #define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ #define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ #define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ #define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ #define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ #define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ #define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index e712d1725a8..458f72f9dc8 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -19,11 +19,8 @@ #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include "omap-wakeupgen.h" - #include "common.h" - #include "powerdomain.h" /* @@ -35,9 +32,6 @@ void __ref omap4_cpu_die(unsigned int cpu) unsigned int boot_cpu = 0; void __iomem *base = omap_get_wakeupgen_base(); - flush_cache_all(); - dsb(); - /* * we're ready for shutdown now, so do it */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index d9727218dd0..61174b78dee 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,7 +21,6 @@ #include <linux/io.h> #include <linux/irqchip/arm-gic.h> -#include <asm/cacheflush.h> #include <asm/smp_scu.h> #include "omap-secure.h" @@ -67,13 +66,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* - * If any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); @@ -84,6 +76,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * { static struct clockdomain *cpu1_clkdm; static bool booted; + static struct powerdomain *cpu1_pwrdm; void __iomem *base = omap_get_wakeupgen_base(); /* @@ -103,11 +96,10 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * else __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); - flush_cache_all(); - smp_wmb(); - - if (!cpu1_clkdm) + if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); + cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm"); + } /* * The SGI(Software Generated Interrupts) are not wakeup capable @@ -120,7 +112,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * Section : * 4.3.4.2 Power States of CPU0 and CPU1 */ - if (booted) { + if (booted && cpu1_pwrdm && cpu1_clkdm) { /* * GIC distributor control register has changed between * CortexA9 r1pX and r2pX. The Control Register secure @@ -141,7 +133,12 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * gic_dist_disable(); } + /* + * Ensure that CPU power state is set to ON to avoid CPU + * powerdomain transition on wfi + */ clkdm_wakeup(cpu1_clkdm); + omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON); clkdm_allow_idle(cpu1_clkdm); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { @@ -168,38 +165,6 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * return 0; } -static void __init wakeup_secondary(void) -{ - void *startup_addr = omap_secondary_startup; - void __iomem *base = omap_get_wakeupgen_base(); - - if (cpu_is_omap446x()) { - startup_addr = omap_secondary_startup_4460; - pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; - } - - /* - * Write the address of secondary startup routine into the - * AuxCoreBoot1 where ROM code will jump and start executing - * on secondary core once out of WFE - * A barrier is added to ensure that write buffer is drained - */ - if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(startup_addr)); - else - __raw_writel(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); - - smp_wmb(); - - /* - * Send a 'sev' to wake the secondary core from WFE. - * Drain the outstanding writes to memory - */ - dsb_sev(); - mb(); -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -235,6 +200,8 @@ static void __init omap4_smp_init_cpus(void) static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { + void *startup_addr = omap_secondary_startup; + void __iomem *base = omap_get_wakeupgen_base(); /* * Initialise the SCU and wake up the secondary core using @@ -242,7 +209,24 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) */ if (scu_base) scu_enable(scu_base); - wakeup_secondary(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + + /* + * Write the address of secondary startup routine into the + * AuxCoreBoot1 where ROM code will jump and start executing + * on secondary core once out of WFE + * A barrier is added to ensure that write buffer is drained + */ + if (omap_secure_apis_support()) + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); + else + __raw_writel(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); + } struct smp_operations omap4_smp_ops __initdata = { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 708bb115a27..20bf3c754bf 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -22,6 +22,7 @@ #include <linux/of_platform.h> #include <linux/export.h> #include <linux/irqchip/arm-gic.h> +#include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> @@ -258,6 +259,21 @@ omap_early_initcall(omap4_sar_ram_init); void __init omap_gic_of_init(void) { + struct device_node *np; + + /* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */ + if (!cpu_is_omap446x()) + goto skip_errata_init; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); + gic_dist_base_addr = of_iomap(np, 0); + WARN_ON(!gic_dist_base_addr); + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); + twd_base = of_iomap(np, 0); + WARN_ON(!twd_base); + +skip_errata_init: omap_wakeupgen_init(); irqchip_init(); } diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index e170fe803b0..6822d0a7324 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -20,13 +20,13 @@ #define SAR_BANK4_OFFSET 0x3000 /* Scratch pad memory offsets from SAR_BANK1 */ -#define SCU_OFFSET0 0xd00 -#define SCU_OFFSET1 0xd04 -#define OMAP_TYPE_OFFSET 0xd10 -#define L2X0_SAVE_OFFSET0 0xd14 -#define L2X0_SAVE_OFFSET1 0xd18 -#define L2X0_AUXCTRL_OFFSET 0xd1c -#define L2X0_PREFETCH_CTRL_OFFSET 0xd20 +#define SCU_OFFSET0 0xfe4 +#define SCU_OFFSET1 0xfe8 +#define OMAP_TYPE_OFFSET 0xfec +#define L2X0_SAVE_OFFSET0 0xff0 +#define L2X0_SAVE_OFFSET1 0xff4 +#define L2X0_AUXCTRL_OFFSET 0xff8 +#define L2X0_PREFETCH_CTRL_OFFSET 0xffc /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b59d9390834..ce956b0a7ba 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -200,22 +200,17 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_fiq_disable(); - if (!omap2_can_sleep()) { if (omap_irq_pending()) - goto out; + return; omap2_enter_mpu_retention(); - goto out; + return; } if (omap_irq_pending()) - goto out; + return; omap2_enter_full_retention(); - -out: - local_fiq_enable(); } static void __init prcm_setup_regs(void) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2d93d8b2383..c01859398b5 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -346,19 +346,14 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_fiq_disable(); - if (omap_irq_pending()) - goto out; + return; trace_cpu_idle(1, smp_processor_id()); omap_sram_idle(); trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); - -out: - local_fiq_enable(); } #ifdef CONFIG_SUSPEND @@ -757,14 +752,12 @@ int __init omap3_pm_init(void) pr_err("Memory allocation failed when allocating for secure sram context\n"); local_irq_disable(); - local_fiq_disable(); omap_dma_global_context_save(); omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); - local_fiq_enable(); } omap3_save_scratchpad_contents(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index ea62e75ef21..5ba6d888d6f 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -131,11 +131,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) */ static void omap_default_idle(void) { - local_fiq_disable(); - omap_do_wfi(); - - local_fiq_enable(); } /** @@ -147,8 +143,8 @@ static void omap_default_idle(void) int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; - struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *ducati_clkdm, *l3_2_clkdm; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); @@ -175,27 +171,19 @@ int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. - * The L4 wakeup depedency is added to workaround the OCP sync hardware - * BUG with 32K synctimer which lead to incorrect timer value read - * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which - * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); - l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); - l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || - (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + (!l3_2_clkdm) || (!ducati_clkdm)) goto err2; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index f62b509ed08..ee7a6bf67c9 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -601,7 +601,7 @@ void __init omap4_local_timer_init(void) int err; if (of_have_populated_dt()) { - twd_local_timer_of_register(); + clocksource_of_init(); return; } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d9c7c3bf0d9..973db98a3c2 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -402,8 +402,9 @@ static void __init orion5x_pci_master_slave_enable(void) orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); } -static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +static void __init orion5x_setup_pci_wins(void) { + const struct mbus_dram_target_info *dram = mv_mbus_dram_info(); u32 win_enable; int bus; int i; @@ -420,7 +421,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) bus = orion5x_pci_local_bus_nr(); for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); u32 reg; u32 val; @@ -467,7 +468,7 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * Point PCI unit MBUS decode windows to DRAM space. */ - orion5x_setup_pci_wins(&orion_mbus_dram_info); + orion5x_setup_pci_wins(); /* * Master + Slave enable diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 4b788310f6a..c7c92e78f0c 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -11,7 +11,6 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/mach/map.h> #include <asm/smp_plat.h> @@ -49,13 +48,6 @@ void __init sirfsoc_map_scu(void) static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 37f513d1588..8d5fa6ece01 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -36,7 +36,6 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" - depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2412_DMA if S3C24XX_DMA @@ -46,7 +45,6 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" - depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM @@ -81,7 +79,6 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" - depends on ARCH_S3C24XX select CPU_ARM920T select CPU_LLSERIAL_S3C2440 select S3C2443_COMMON @@ -133,7 +130,6 @@ config S3C24XX_SETUP_TS config S3C24XX_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -142,7 +138,7 @@ config S3C24XX_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C24XX && S3C2410_DMA + depends on S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. @@ -233,7 +229,7 @@ if CPU_S3C2410 config S3C2410_CPUFREQ bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2410 + depends on CPU_FREQ_S3C24XX select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2410 @@ -320,7 +316,6 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" - select MACH_N35 select S3C_DEV_NAND select S3C_DEV_USB_HOST help @@ -380,14 +375,13 @@ if CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C24XX && !CPU_S3C2410 && \ - !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ - !CPU_S3C2443 && CPU_S3C2412 + depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ + !CPU_S3C2442 && !CPU_S3C2443 default y config S3C2412_CPUFREQ bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2412 + depends on CPU_FREQ_S3C24XX default y select S3C2412_IOTIMING help @@ -642,7 +636,6 @@ comment "S3C2442 Boards" config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" select I2C - select MACH_NEO1973 select MFD_PCF50633 select PCF50633_GPIO select POWER_SUPPLY @@ -663,10 +656,7 @@ config MACH_RX1950 help Say Y here if you're using HP iPAQ rx1950 -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - -endif # CPU_S3C2440 +endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index c0daa9590b4..cb1b791954d 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -34,8 +34,6 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> -#include <plat/irq.h> - #include "bast.h" #define irqdbf(x...) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index 641266f3d15..34fffdf6fc1 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -40,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d10b695a906..2cc017da88f 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -41,7 +41,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 14a81c2317a..036056cea57 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/clk.h> -#include <plat/s3c2416.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index bdaba59b42d..0a53051b078 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -41,7 +41,6 @@ #include <plat/cpu-freq.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 3b2cf6db363..404444dd384 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -41,11 +41,12 @@ #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/pm.h> +#include "common-smdk.h" + /* LED devices */ static struct s3c24xx_led_platdata smdk_pdata_led4 = { diff --git a/arch/arm/plat-samsung/include/plat/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h index ba028f1ed30..98f733e1cb4 100644 --- a/arch/arm/plat-samsung/include/plat/common-smdk.h +++ b/arch/arm/mach-s3c24xx/common-smdk.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h - * +/* * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 6bcf87f65f9..d97533d21ac 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -47,14 +47,11 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> -#include <plat/s3c2416.h> -#include <plat/s3c244x.h> -#include <plat/s3c2443.h> #include <plat/cpu-freq.h> #include <plat/pll.h> +#include "common.h" + /* table of supported CPUs */ static const char name_s3c2410[] = "S3C2410"; diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index ed6276fcaa3..8a2b4137ddb 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -12,8 +12,94 @@ #ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ -void s3c2410_restart(char mode, const char *cmd); -void s3c244x_restart(char mode, const char *cmd); +struct s3c2410_uartcfg; + +#ifdef CONFIG_CPU_S3C2410 +extern int s3c2410_init(void); +extern int s3c2410a_init(void); +extern void s3c2410_map_io(void); +extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2410_init_clocks(int xtal); +extern void s3c2410_restart(char mode, const char *cmd); +#else +#define s3c2410_init_clocks NULL +#define s3c2410_init_uarts NULL +#define s3c2410_map_io NULL +#define s3c2410_init NULL +#define s3c2410a_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2412 +extern int s3c2412_init(void); +extern void s3c2412_map_io(void); +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2412_init_clocks(int xtal); +extern int s3c2412_baseclk_add(void); +extern void s3c2412_restart(char mode, const char *cmd); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2416 +extern int s3c2416_init(void); +extern void s3c2416_map_io(void); +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2416_init_clocks(int xtal); +extern int s3c2416_baseclk_add(void); +extern void s3c2416_restart(char mode, const char *cmd); +extern void s3c2416_init_irq(void); + +extern struct syscore_ops s3c2416_irq_syscore_ops; +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +extern void s3c244x_map_io(void); +extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c244x_init_clocks(int xtal); +extern void s3c244x_restart(char mode, const char *cmd); +#else +#define s3c244x_init_clocks NULL +#define s3c244x_init_uarts NULL +#endif + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +extern void s3c2440_map_io(void); +#else +#define s3c2440_init NULL +#define s3c2440_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +extern void s3c2442_map_io(void); +#else +#define s3c2442_init NULL +#define s3c2442_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2443 +extern int s3c2443_init(void); +extern void s3c2443_map_io(void); +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2443_init_clocks(int xtal); +extern int s3c2443_baseclk_add(void); +extern void s3c2443_restart(char mode, const char *cmd); +extern void s3c2443_init_irq(void); +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif extern struct syscore_ops s3c24xx_irq_syscore_ops; diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 25d085adc93..a6c94b82095 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index d2408ba372c..c0e8c3f5057 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 0b86e74d104..1c08eccd942 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 05536254a3f..000e4c69fce 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 6b72d5a4b37..b55da1d8cd8 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,6 @@ */ enum dma_ch { - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h deleted file mode 100644 index cbf2d8884e3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index e1199599873..b91341ef2b2 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -16,10 +16,15 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/syscore_ops.h> +#include <linux/io.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/irq.h> +#include <plat/map-base.h> +#include <plat/map-s3c.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> #include <asm/irq.h> diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c index d8ba9bee4c7..b41c2cb7af4 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/arch/arm/mach-s3c24xx/irq.c @@ -25,6 +25,7 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <asm/mach/irq.h> @@ -34,7 +35,6 @@ #include <plat/cpu.h> #include <plat/regs-irqtype.h> #include <plat/pm.h> -#include <plat/irq.h> #define S3C_IRQTYPE_NONE 0 #define S3C_IRQTYPE_EINT 1 @@ -175,8 +175,7 @@ static int s3c_irqext_type_set(void __iomem *gpcon_reg, return 0; } -/* FIXME: make static when it's out of plat-samsung/irq.h */ -int s3c_irqext_type(struct irq_data *data, unsigned int type) +static int s3c_irqext_type(struct irq_data *data, unsigned int type) { void __iomem *extint_reg; void __iomem *gpcon_reg; @@ -224,7 +223,7 @@ static int s3c_irqext0_type(struct irq_data *data, unsigned int type) extint_offset, type); } -struct irq_chip s3c_irq_chip = { +static struct irq_chip s3c_irq_chip = { .name = "s3c", .irq_ack = s3c_irq_ack, .irq_mask = s3c_irq_mask, @@ -232,7 +231,7 @@ struct irq_chip s3c_irq_chip = { .irq_set_wake = s3c_irq_wake }; -struct irq_chip s3c_irq_level_chip = { +static struct irq_chip s3c_irq_level_chip = { .name = "s3c-level", .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 54e83c1f780..ca08d7df07f 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -46,7 +46,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/s3c2412.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> @@ -54,6 +53,7 @@ #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include "common.h" #include "s3c2412-power.h" static struct map_desc jive_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index d9d04b24029..8017c0fc172 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -48,7 +48,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> -#include <plat/s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index a454e246186..144b9f80c4a 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -41,8 +41,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 40a47d6c6a8..deb0ace585b 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -33,7 +33,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> -#include <plat/s3c2410.h> #include "common.h" #include "otom.h" diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 56175f0941b..84c54160266 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -55,13 +55,13 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> #include "common.h" +#include "common-smdk.h" static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index e184bfa9613..cd0b1635c47 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -52,9 +52,8 @@ #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/common-smdk.h> - #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 86d7847c9d4..79485907950 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -41,13 +41,12 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <mach/fb.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2413_iodesc[] __initdata = { }; diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index ebb2e61f3d0..037a5da343b 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -42,7 +42,6 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2416.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> @@ -54,7 +53,8 @@ #include <plat/fb.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2416_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 08cc38c8a4a..29d31314e23 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,15 +38,12 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/common-smdk.h> - #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index fc65d74d3c7..b3be4c4dc7b 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -38,13 +38,12 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 3e2bfddc9df..239129c2d8b 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -41,12 +41,11 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include "common.h" static struct map_desc vstms_iodesc[] __initdata = { }; diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 668a78a8b19..4c4bc1c83b7 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -29,7 +29,6 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/s3c2412.h> #include "regs-dsc.h" #include "s3c2412-power.h" diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h index 98fd4a05587..61b3d1387d7 100644 --- a/arch/arm/mach-s3c24xx/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/regs-dsc.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h - * +/* * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ * @@ -12,209 +11,15 @@ #ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" +#define __ASM_ARCH_REGS_DSC_H __FILE__ -#if defined(CONFIG_CPU_S3C2412) +/* S3C2412 */ #define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C2416) -#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) -#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) -#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) -#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) - -#define S3C2416_SELECT_DSC0 (0 << 30) -#define S3C2416_SELECT_DSC1 (1 << 30) -#define S3C2416_SELECT_DSC2 (2 << 30) -#define S3C2416_SELECT_DSC3 (3 << 30) - -#define S3C2416_DSC_GETSHIFT(x) (x & 30) - -#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) -#define S3C2416_DSC0_CF_5mA (0 << 28) -#define S3C2416_DSC0_CF_10mA (1 << 28) -#define S3C2416_DSC0_CF_15mA (2 << 28) -#define S3C2416_DSC0_CF_21mA (3 << 28) -#define S3C2416_DSC0_CF_MASK (3 << 28) - -#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) -#define S3C2416_DSC0_nRBE_5mA (0 << 26) -#define S3C2416_DSC0_nRBE_10mA (1 << 26) -#define S3C2416_DSC0_nRBE_15mA (2 << 26) -#define S3C2416_DSC0_nRBE_21mA (3 << 26) -#define S3C2416_DSC0_nRBE_MASK (3 << 26) - -#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) -#define S3C2416_DSC0_nROE_5mA (0 << 24) -#define S3C2416_DSC0_nROE_10mA (1 << 24) -#define S3C2416_DSC0_nROE_15mA (2 << 24) -#define S3C2416_DSC0_nROE_21mA (3 << 24) -#define S3C2416_DSC0_nROE_MASK (3 << 24) - -#endif - -#if defined(CONFIG_CPU_S3C244X) +/* S3C2440 */ #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) #define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - #endif /* __ASM_ARCH_REGS_DSC_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 9ebef95da72..d850ea5adac 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -37,7 +37,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> -#include <plat/s3c2410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 0d592159a5c..0f864d4c97d 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -44,7 +44,6 @@ #include <plat/pm.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> -#include <plat/s3c2412.h> #include "common.h" #include "regs-dsc.h" diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index e30476db029..b9c5d382daf 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -50,7 +50,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2416.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/sdhci.h> diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 559e394e898..5f9d6569475 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -33,7 +33,6 @@ #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index f732826c235..6819961f6b1 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -44,7 +44,6 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 165b6a6b3da..8328cd65bf3 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -36,7 +36,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2443.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index ad2671baa91..2a35edb6735 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -37,8 +37,6 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index f9ce1dc28ce..31d0c910127 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-y += dev-uart.o obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o # Device setup diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 57b1ff4b2d7..fe1a98cf0e4 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -21,7 +21,6 @@ */ enum dma_ch { /* DMA0/SDMA0 */ - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_UART0 = 0, DMACH_UART0_SRC2, DMACH_UART1, diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h index 9fbd3ae2b40..c41f912e9e1 100644 --- a/arch/arm/mach-s5pc100/common.h +++ b/arch/arm/mach-s5pc100/common.h @@ -20,18 +20,9 @@ void s5pc100_setup_clocks(void); void s5pc100_restart(char mode, const char *cmd); -#ifdef CONFIG_CPU_S5PC100 - extern int s5pc100_init(void); extern void s5pc100_map_io(void); extern void s5pc100_init_clocks(int xtal); extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s5pc100_init_clocks NULL -#define s5pc100_init_uarts NULL -#define s5pc100_map_io NULL -#define s5pc100_init NULL -#endif - #endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h index 6ed2af5c751..0a1cc0aef72 100644 --- a/arch/arm/mach-s5pv210/common.h +++ b/arch/arm/mach-s5pv210/common.h @@ -20,18 +20,9 @@ void s5pv210_setup_clocks(void); void s5pv210_restart(char mode, const char *cmd); -#ifdef CONFIG_CPU_S5PV210 - extern int s5pv210_init(void); extern void s5pv210_map_io(void); extern void s5pv210_init_clocks(int xtal); extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s5pv210_init_clocks NULL -#define s5pv210_init_uarts NULL -#define s5pv210_map_io NULL -#define s5pv210_init NULL -#endif - #endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 953eb1f9388..384e27dd360 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> @@ -85,11 +84,6 @@ static int __maybe_unused emev2_cpu_kill(unsigned int cpu) } -static void __cpuinit emev2_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -124,7 +118,6 @@ static void __init emev2_smp_init_cpus(void) struct smp_operations emev2_smp_ops __initdata = { .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, - .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = emev2_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3a4acf23edc..994906560ed 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> #include <asm/smp_plat.h> @@ -132,11 +131,6 @@ static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu) } -static void __cpuinit r8a7779_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; @@ -186,7 +180,6 @@ static void __init r8a7779_smp_init_cpus(void) struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, .smp_prepare_cpus = r8a7779_smp_prepare_cpus, - .smp_secondary_init = r8a7779_secondary_init, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index acb46a94ccd..d0f9aca2247 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -59,11 +58,6 @@ static unsigned int __init sh73a0_get_core_count(void) return scu_get_core_count(scu_base); } -static void __cpuinit sh73a0_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -138,7 +132,6 @@ static void sh73a0_cpu_die(unsigned int cpu) struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, .smp_prepare_cpus = sh73a0_smp_prepare_cpus, - .smp_secondary_init = sh73a0_secondary_init, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 84c60fa8daa..ca14d1d5ac7 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> @@ -33,16 +32,6 @@ extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; -static void __cpuinit socfpga_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; @@ -109,7 +98,6 @@ static void socfpga_cpu_die(unsigned int cpu) struct smp_operations socfpga_smp_ops __initdata = { .smp_init_cpus = socfpga_smp_init_cpus, .smp_prepare_cpus = socfpga_smp_prepare_cpus, - .smp_secondary_init = socfpga_secondary_init, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c index af4ade61cd9..551c69c9a22 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear13xx/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <mach/spear.h> @@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE); static void __cpuinit spear13xx_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index c7d2b4a8d8c..25a10191b02 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -15,12 +15,12 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> +#include <linux/clocksource.h> #include <linux/dw_dmac.h> #include <linux/err.h> #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <asm/smp_twd.h> #include <mach/dma.h> #include <mach/generic.h> #include <mach/spear.h> @@ -179,5 +179,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - twd_local_timer_of_register(); + clocksource_of_init(); } diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 8709a39bd34..d259c782d74 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,11 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select PINCTRL select SPARSE_IRQ - select SUNXI_TIMER - select PINCTRL_SUNXI
\ No newline at end of file + select SUN4I_TIMER + select PINCTRL_SUNXI diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 23afb732cb4..706ce35396b 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,63 +10,77 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clocksource.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/io.h> -#include <linux/sunxi_timer.h> -#include <linux/irqchip/sunxi.h> +#include <linux/clk/sunxi.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include "sunxi.h" -#define WATCHDOG_CTRL_REG 0x00 -#define WATCHDOG_CTRL_RESTART (1 << 0) -#define WATCHDOG_MODE_REG 0x04 -#define WATCHDOG_MODE_ENABLE (1 << 0) -#define WATCHDOG_MODE_RESET_ENABLE (1 << 1) +#define SUN4I_WATCHDOG_CTRL_REG 0x00 +#define SUN4I_WATCHDOG_CTRL_RESTART (1 << 0) +#define SUN4I_WATCHDOG_MODE_REG 0x04 +#define SUN4I_WATCHDOG_MODE_ENABLE (1 << 0) +#define SUN4I_WATCHDOG_MODE_RESET_ENABLE (1 << 1) static void __iomem *wdt_base; -static void sunxi_setup_restart(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "allwinner,sunxi-wdt"); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void sunxi_restart(char mode, const char *cmd) +static void sun4i_restart(char mode, const char *cmd) { if (!wdt_base) return; /* Enable timer and set reset bit in the watchdog */ - writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, - wdt_base + WATCHDOG_MODE_REG); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); /* * Restart the watchdog. The default (and lowest) interval * value for the watchdog is 0.5s. */ - writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG); + writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); while (1) { mdelay(5); - writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, - wdt_base + WATCHDOG_MODE_REG); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); } } +static struct of_device_id sunxi_restart_ids[] = { + { .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart }, + { /*sentinel*/ } +}; + +static void sunxi_setup_restart(void) +{ + const struct of_device_id *of_id; + struct device_node *np; + + np = of_find_matching_node(NULL, sunxi_restart_ids); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); + + of_id = of_match_node(sunxi_restart_ids, np); + WARN(!of_id, "restart function not available"); + + arm_pm_restart = of_id->data; +} + static struct map_desc sunxi_io_desc[] __initdata = { { .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, @@ -81,6 +95,12 @@ void __init sunxi_map_io(void) iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); } +static void __init sunxi_timer_init(void) +{ + sunxi_init_clocks(); + clocksource_of_init(); +} + static void __init sunxi_dt_init(void) { sunxi_setup_restart(); @@ -97,9 +117,7 @@ static const char * const sunxi_board_dt_compat[] = { DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .init_machine = sunxi_dt_init, .map_io = sunxi_map_io, - .init_irq = sunxi_init_irq, - .handle_irq = sunxi_handle_irq, - .restart = sunxi_restart, - .init_time = &sunxi_timer_init, + .init_irq = irqchip_init, + .init_time = sunxi_timer_init, .dt_compat = sunxi_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f6b46ae2b7f..92703f955a3 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -10,6 +10,7 @@ obj-y += pm.o obj-y += reset.o obj-y += reset-handler.o obj-y += sleep.o +obj-y += tegra.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o @@ -27,9 +28,6 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif diff --git a/arch/arm/mach-tegra/board-dt-tegra114.c b/arch/arm/mach-tegra/board-dt-tegra114.c deleted file mode 100644 index 085d63637b6..00000000000 --- a/arch/arm/mach-tegra/board-dt-tegra114.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * NVIDIA Tegra114 device tree board support - * - * Copyright (C) 2013 NVIDIA Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/clocksource.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" - -static void __init tegra114_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const tegra114_dt_board_compat[] = { - "nvidia,tegra114", - NULL, -}; - -DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra114_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra114_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra114_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c deleted file mode 100644 index bf68567e549..00000000000 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-tegra/board-dt-tegra30.c - * - * NVIDIA Tegra30 device tree board support - * - * Copyright (C) 2011 NVIDIA Corporation - * - * Derived from: - * - * arch/arm/mach-tegra/board-dt-tegra20.c - * - * Copyright (C) 2010 Secret Lab Technologies, Ltd. - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clocksource.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" -#include "iomap.h" - -static void __init tegra30_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *tegra30_dt_board_compat[] = { - "nvidia,tegra30", - NULL -}; - -DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra30_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra30_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra30_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 3cdc1bb8254..d195db09ea3 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -62,7 +62,11 @@ int __init harmony_pcie_init(void) goto err_reg; } - regulator_enable(regulator); + err = regulator_enable(regulator); + if (err) { + pr_err("%s: regulator_enable failed: %d\n", __func__, err); + goto err_en; + } err = tegra_pcie_init(true, true); if (err) { @@ -74,6 +78,7 @@ int __init harmony_pcie_init(void) err_pcie: regulator_disable(regulator); +err_en: regulator_put(regulator); err_reg: gpio_free(en_vdd_1v05); diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 86851c81a35..60431de585c 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -26,9 +26,7 @@ void tegra_assert_system_reset(char mode, const char *cmd); -void __init tegra20_init_early(void); -void __init tegra30_init_early(void); -void __init tegra114_init_early(void); +void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 5449a3f2977..f0315c95c76 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -94,7 +94,7 @@ static void __init tegra_init_cache(void) } -static void __init tegra_init_early(void) +void __init tegra_init_early(void) { tegra_cpu_reset_handler_init(); tegra_apb_io_init(); @@ -102,31 +102,9 @@ static void __init tegra_init_early(void) tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); + tegra_hotplug_init(); } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void __init tegra20_init_early(void) -{ - tegra_init_early(); - tegra20_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -void __init tegra30_init_early(void) -{ - tegra_init_early(); - tegra30_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_114_SOC -void __init tegra114_init_early(void) -{ - tegra_init_early(); -} -#endif - void __init tegra_init_late(void) { tegra_powergate_debugfs_init(); diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 8b50cf4ddd6..80445ed33d9 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -102,12 +102,8 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, smp_wmb(); - save_cpu_arch_register(); - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - restore_cpu_arch_register(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); return true; diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index fd473f2b4c3..045c16f2dd5 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -7,8 +7,5 @@ ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index a599f6e36de..8da9f78475d 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -1,8 +1,7 @@ /* - * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +14,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> +#include "fuse.h" #include "sleep.h" static void (*tegra_hotplug_shutdown)(void); @@ -56,18 +56,13 @@ int tegra_cpu_disable(unsigned int cpu) return cpu == 0 ? -EPERM : 0; } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -extern void tegra20_hotplug_shutdown(void); -void __init tegra20_hotplug_init(void) +void __init tegra_hotplug_init(void) { - tegra_hotplug_shutdown = tegra20_hotplug_shutdown; -} -#endif + if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) + return; -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -extern void tegra30_hotplug_shutdown(void); -void __init tegra30_hotplug_init(void) -{ - tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + tegra_hotplug_shutdown = tegra20_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + tegra_hotplug_shutdown = tegra30_hotplug_shutdown; } -#endif diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d55213..c31db797e19 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,7 +18,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <linux/clk/tegra.h> #include <asm/cacheflush.h> @@ -26,53 +25,58 @@ #include <asm/smp_scu.h> #include <asm/smp_plat.h> -#include <mach/powergate.h> - #include "fuse.h" #include "flowctrl.h" #include "reset.h" +#include "pmc.h" #include "common.h" #include "iomap.h" -extern void tegra_secondary_startup(void); - static cpumask_t tegra_cpu_init_mask; -#define EVP_CPU_RESET_VECTOR \ - (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) - static void __cpuinit tegra_secondary_init(unsigned int cpu) { - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } -static int tegra20_power_up_cpu(unsigned int cpu) + +static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle) { - /* Enable the CPU clock. */ - tegra_enable_cpu_clock(cpu); + cpu = cpu_logical_map(cpu); - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + /* + * Force the CPU into reset. The CPU must remain in reset when + * the flow controller state is cleared (which will cause the + * flow controller to stop driving reset if the CPU has been + * power-gated via the flow controller). This will have no + * effect on first boot of the CPU since it should already be + * in reset. + */ + tegra_put_cpu_in_reset(cpu); + /* + * Unhalt the CPU. If the flow controller was used to + * power-gate the CPU this will cause the flow controller to + * stop driving reset. The CPU will remain in reset because the + * clock and reset block is now driving reset. + */ + flowctrl_write_cpu_halt(cpu, 0); + + tegra_enable_cpu_clock(cpu); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int tegra30_power_up_cpu(unsigned int cpu) +static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int ret, pwrgateid; + int ret; unsigned long timeout; - pwrgateid = tegra_cpu_powergate_id(cpu); - if (pwrgateid < 0) - return pwrgateid; + cpu = cpu_logical_map(cpu); + tegra_put_cpu_in_reset(cpu); + flowctrl_write_cpu_halt(cpu, 0); /* * The power up sequence of cold boot CPU and warm boot CPU @@ -85,13 +89,13 @@ static int tegra30_power_up_cpu(unsigned int cpu) * the IO clamps. * For cold boot CPU, do not wait. After the cold boot CPU be * booted, it will run to tegra_secondary_init() and set - * tegra_cpu_init_mask which influences what tegra30_power_up_cpu() + * tegra_cpu_init_mask which influences what tegra30_boot_secondary() * next time around. */ if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { timeout = jiffies + msecs_to_jiffies(50); do { - if (!tegra_powergate_is_powered(pwrgateid)) + if (tegra_pmc_cpu_is_powered(cpu)) goto remove_clamps; udelay(10); } while (time_before(jiffies, timeout)); @@ -103,14 +107,14 @@ static int tegra30_power_up_cpu(unsigned int cpu) * be un-gated by un-toggling the power gate register * manually. */ - if (!tegra_powergate_is_powered(pwrgateid)) { - ret = tegra_powergate_power_on(pwrgateid); + if (!tegra_pmc_cpu_is_powered(cpu)) { + ret = tegra_pmc_cpu_power_on(cpu); if (ret) return ret; /* Wait for the power to come up. */ timeout = jiffies + msecs_to_jiffies(100); - while (tegra_powergate_is_powered(pwrgateid)) { + while (tegra_pmc_cpu_is_powered(cpu)) { if (time_after(jiffies, timeout)) return -ETIMEDOUT; udelay(10); @@ -123,57 +127,26 @@ remove_clamps: udelay(10); /* Remove I/O clamps. */ - ret = tegra_powergate_remove_clamping(pwrgateid); - udelay(10); + ret = tegra_pmc_cpu_remove_clamping(cpu); + if (ret) + return ret; - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + udelay(10); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit tegra_boot_secondary(unsigned int cpu, + struct task_struct *idle) { - int status; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + return tegra20_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + return tegra30_boot_secondary(cpu, idle); - cpu = cpu_logical_map(cpu); - - /* - * Force the CPU into reset. The CPU must remain in reset when the - * flow controller state is cleared (which will cause the flow - * controller to stop driving reset if the CPU has been power-gated - * via the flow controller). This will have no effect on first boot - * of the CPU since it should already be in reset. - */ - tegra_put_cpu_in_reset(cpu); - - /* - * Unhalt the CPU. If the flow controller was used to power-gate the - * CPU this will cause the flow controller to stop driving reset. - * The CPU will remain in reset because the clock and reset block - * is now driving reset. - */ - flowctrl_write_cpu_halt(cpu, 0); - - switch (tegra_chip_id) { - case TEGRA20: - status = tegra20_power_up_cpu(cpu); - break; - case TEGRA30: - status = tegra30_power_up_cpu(cpu); - break; - default: - status = -EINVAL; - break; - } - - if (status) - goto done; - - /* Take the CPU out of reset. */ - tegra_cpu_out_of_reset(cpu); -done: - return status; + return -EINVAL; } static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 523604de666..acacbe8d1af 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -46,26 +46,11 @@ #define PMC_CPUPWROFF_TIMER 0xcc #ifdef CONFIG_PM_SLEEP -static unsigned int g_diag_reg; static DEFINE_SPINLOCK(tegra_lp2_lock); static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); static struct clk *tegra_pclk; void (*tegra_tear_down_cpu)(void); -void save_cpu_arch_register(void) -{ - /* read diagnostic register */ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -void restore_cpu_arch_register(void) -{ - /* write diagnostic register */ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - static void set_power_timers(unsigned long us_on, unsigned long us_off) { unsigned long long ticks; @@ -119,8 +104,6 @@ static void restore_cpu_complex(void) tegra_cpu_clock_resume(); flowctrl_cpu_suspend_exit(cpu); - - restore_cpu_arch_register(); } /* @@ -145,8 +128,6 @@ static void suspend_cpu_complex(void) tegra_cpu_clock_suspend(); flowctrl_cpu_suspend_enter(cpu); - - save_cpu_arch_register(); } void tegra_clear_cpu_in_lp2(int phy_cpu_id) @@ -183,12 +164,7 @@ bool tegra_set_cpu_in_lp2(int phy_cpu_id) static int tegra_sleep_cpu(unsigned long v2p) { - /* Switch to the identity mapping. */ - cpu_switch_mm(idmap_pgd, &init_mm); - - /* Flush the TLB. */ - local_flush_tlb_all(); - + setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); /* should never here */ diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index d4fdb5fcec2..b30e921cc3a 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -18,57 +18,149 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> -#include "iomap.h" +#define PMC_CTRL 0x0 +#define PMC_CTRL_INTR_LOW (1 << 17) +#define PMC_PWRGATE_TOGGLE 0x30 +#define PMC_PWRGATE_TOGGLE_START (1 << 8) +#define PMC_REMOVE_CLAMPING 0x34 +#define PMC_PWRGATE_STATUS 0x38 -#define PMC_CTRL 0x0 -#define PMC_CTRL_INTR_LOW (1 << 17) +#define TEGRA_POWERGATE_PCIE 3 +#define TEGRA_POWERGATE_VDEC 4 +#define TEGRA_POWERGATE_CPU1 9 +#define TEGRA_POWERGATE_CPU2 10 +#define TEGRA_POWERGATE_CPU3 11 + +static u8 tegra_cpu_domains[] = { + 0xFF, /* not available for CPU0 */ + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; +static DEFINE_SPINLOCK(tegra_powergate_lock); + +static void __iomem *tegra_pmc_base; +static bool tegra_pmc_invert_interrupt; static inline u32 tegra_pmc_readl(u32 reg) { - return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg)); + return readl(tegra_pmc_base + reg); } static inline void tegra_pmc_writel(u32 val, u32 reg) { - writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg)); + writel(val, tegra_pmc_base + reg); +} + +static int tegra_pmc_get_cpu_powerdomain_id(int cpuid) +{ + if (cpuid <= 0 || cpuid >= num_possible_cpus()) + return -EINVAL; + return tegra_cpu_domains[cpuid]; +} + +static bool tegra_pmc_powergate_is_powered(int id) +{ + return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1; +} + +static int tegra_pmc_powergate_set(int id, bool new_state) +{ + bool old_state; + unsigned long flags; + + spin_lock_irqsave(&tegra_powergate_lock, flags); + + old_state = tegra_pmc_powergate_is_powered(id); + WARN_ON(old_state == new_state); + + tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE); + + spin_unlock_irqrestore(&tegra_powergate_lock, flags); + + return 0; +} + +static int tegra_pmc_powergate_remove_clamping(int id) +{ + u32 mask; + + /* + * Tegra has a bug where PCIE and VDE clamping masks are + * swapped relatively to the partition ids. + */ + if (id == TEGRA_POWERGATE_VDEC) + mask = (1 << TEGRA_POWERGATE_PCIE); + else if (id == TEGRA_POWERGATE_PCIE) + mask = (1 << TEGRA_POWERGATE_VDEC); + else + mask = (1 << id); + + tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING); + + return 0; +} + +bool tegra_pmc_cpu_is_powered(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return false; + return tegra_pmc_powergate_is_powered(id); +} + +int tegra_pmc_cpu_power_on(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_set(id, true); +} + +int tegra_pmc_cpu_remove_clamping(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_remove_clamping(id); } -#ifdef CONFIG_OF static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra114-pmc" }, + { .compatible = "nvidia,tegra30-pmc" }, { .compatible = "nvidia,tegra20-pmc" }, { } }; -#endif -void __init tegra_pmc_init(void) +static void tegra_pmc_parse_dt(void) { - /* - * For now, Harmony is the only board that uses the PMC, and it wants - * the signal inverted. Seaboard would too if it used the PMC. - * Hopefully by the time other boards want to use the PMC, everything - * will be device-tree, or they also want it inverted. - */ - bool invert_interrupt = true; - u32 val; + struct device_node *np; -#ifdef CONFIG_OF - if (of_have_populated_dt()) { - struct device_node *np; + np = of_find_matching_node(NULL, matches); + BUG_ON(!np); - invert_interrupt = false; + tegra_pmc_base = of_iomap(np, 0); + + tegra_pmc_invert_interrupt = of_property_read_bool(np, + "nvidia,invert-interrupt"); +} + +void __init tegra_pmc_init(void) +{ + u32 val; - np = of_find_matching_node(NULL, matches); - if (np) { - if (of_find_property(np, "nvidia,invert-interrupt", - NULL)) - invert_interrupt = true; - } - } -#endif + tegra_pmc_parse_dt(); val = tegra_pmc_readl(PMC_CTRL); - if (invert_interrupt) + if (tegra_pmc_invert_interrupt) val |= PMC_CTRL_INTR_LOW; else val &= ~PMC_CTRL_INTR_LOW; diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index 8995ee4a876..7d44710368b 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -18,6 +18,10 @@ #ifndef __MACH_TEGRA_PMC_H #define __MACH_TEGRA_PMC_H +bool tegra_pmc_cpu_is_powered(int cpuid); +int tegra_pmc_cpu_power_on(int cpuid); +int tegra_pmc_cpu_remove_clamping(int cpuid); + void tegra_pmc_init(void); #endif diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index c6bc8f85759..af9067e2867 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/io.h> #include <linux/seq_file.h> @@ -75,7 +76,7 @@ static int tegra_powergate_set(int id, bool new_state) if (status == new_state) { spin_unlock_irqrestore(&tegra_powergate_lock, flags); - return -EINVAL; + return 0; } pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE); @@ -168,6 +169,7 @@ err_clk: err_power: return ret; } +EXPORT_SYMBOL(tegra_powergate_sequence_power_up); int tegra_cpu_powergate_id(int cpuid) { diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 54382ceade4..1676aba5e7b 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -41,9 +41,6 @@ */ ENTRY(tegra_resume) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 cpu_id r0 cmp r0, #0 @ CPU0? @@ -99,6 +96,8 @@ ENTRY(__tegra_cpu_reset_handler_start) * * Register usage within the reset handler: * + * Others: scratch + * R6 = SoC ID << 8 * R7 = CPU present (to the OS) mask * R8 = CPU in LP1 state mask * R9 = CPU in LP2 state mask @@ -114,6 +113,40 @@ ENTRY(__tegra_cpu_reset_handler_start) ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled + + mov32 r6, TEGRA_APB_MISC_BASE + ldr r6, [r6, #APB_MISC_GP_HIDREV] + and r6, r6, #0xff00 +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +t20_check: + cmp r6, #(0x20 << 8) + bne after_t20_check +t20_errata: + # Tegra20 is a Cortex-A9 r1p1 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 14 @ erratum 716044 + mcr p15, 0, r0, c1, c0, 0 @ write system control register + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ erratum 742230 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t20_check: +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +t30_check: + cmp r6, #(0x30 << 8) + bne after_t30_check +t30_errata: + # Tegra30 is a Cortex-A9 r2p9 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ erratum 743622 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t30_check: +#endif +after_errata: mrc p15, 0, r10, c0, c0, 5 @ MPIDR and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 @@ -129,16 +162,13 @@ ENTRY(__tegra_cpu_reset_handler) #ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #(0x20 << 8) bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE + mov32 r5, TEGRA_PMC_BASE mov r0, #0 cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] + strne r0, [r5, #PMC_SCRATCH41] 1: #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4ffae541726..970ebd5138b 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -124,11 +124,11 @@ int tegra_sleep_cpu_finish(unsigned long); void tegra_disable_clean_inv_dcache(void); #ifdef CONFIG_HOTPLUG_CPU -void tegra20_hotplug_init(void); -void tegra30_hotplug_init(void); +void tegra20_hotplug_shutdown(void); +void tegra30_hotplug_shutdown(void); +void tegra_hotplug_init(void); #else -static inline void tegra20_hotplug_init(void) {} -static inline void tegra30_hotplug_init(void) {} +static inline void tegra_hotplug_init(void) {} #endif void tegra20_cpu_shutdown(int cpu); diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/tegra.c index a0edf251028..27232c901a2 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/tegra.c @@ -1,6 +1,7 @@ /* - * nVidia Tegra device tree board support + * NVIDIA Tegra SoC device tree board support * + * Copyright (C) 2011, 2013, NVIDIA Corporation * Copyright (C) 2010 Secret Lab Technologies, Ltd. * Copyright (C) 2010 Google, Inc. * @@ -111,7 +112,8 @@ static void __init harmony_init(void) static void __init paz00_init(void) { - tegra_paz00_wifikill_init(); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra_paz00_wifikill_init(); } static struct { @@ -137,19 +139,21 @@ static void __init tegra_dt_init_late(void) } } -static const char *tegra20_dt_board_compat[] = { +static const char * const tegra_dt_board_compat[] = { + "nvidia,tegra114", + "nvidia,tegra30", "nvidia,tegra20", NULL }; -DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") +DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .map_io = tegra_map_common_io, .smp = smp_ops(tegra_smp_ops), - .init_early = tegra20_init_early, + .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_time = clocksource_of_init, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, - .dt_compat = tegra20_dt_board_compat, + .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af339dc..152b1309b9a 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index a6af0b8732b..d07bbe7f04a 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> @@ -32,7 +33,7 @@ static void __init ux500_twd_init(void) twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) - twd_local_timer_of_register(); + clocksource_of_init(); else { err = twd_local_timer_register(twd_local_timer); if (err) diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683cb67d..d0ad78998cb 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -5,6 +5,7 @@ #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> @@ -25,7 +26,6 @@ #include <asm/arch_timer.h> #include <asm/mach-types.h> #include <asm/sizes.h> -#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -435,6 +435,7 @@ static void __init v2m_dt_timer_init(void) vexpress_clk_of_init(); + clocksource_of_init(); do { node = of_find_compatible_node(node, NULL, "arm,sp804"); } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); @@ -445,8 +446,7 @@ static void __init v2m_dt_timer_init(void) irq_of_parse_and_map(node, 0)); } - if (arch_timer_of_register() != 0) - twd_local_timer_of_register(); + arch_timer_of_register(); if (arch_timer_sched_clock_init() != 0) versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c index 8badaabe70a..f4143f5bfa5 100644 --- a/arch/arm/mach-virt/platsmp.c +++ b/arch/arm/mach-virt/platsmp.c @@ -21,8 +21,6 @@ #include <linux/smp.h> #include <linux/of.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/psci.h> #include <asm/smp_plat.h> @@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu, return -ENODEV; } -static void __cpuinit virt_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - struct smp_operations __initdata virt_smp_ops = { .smp_init_cpus = virt_smp_init_cpus, .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_secondary_init = virt_secondary_init, .smp_boot_secondary = virt_boot_secondary, }; diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index a82cecb8494..ad97400ba3a 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -3,7 +3,11 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-y += addr-map.o +obj-$(CONFIG_ARCH_MVEBU) += addr-map.o +obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o +obj-$(CONFIG_ARCH_DOVE) += addr-map.o +obj-$(CONFIG_ARCH_ORION5X) += addr-map.o +obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index f20a321088a..8b8c06d2e9c 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -120,12 +120,14 @@ void __init orion_pcie_reset(void __iomem *base) * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks * WIN[0-3] -> DRAM bank[0-3] */ -static void __init orion_pcie_setup_wins(void __iomem *base, - struct mbus_dram_target_info *dram) +static void __init orion_pcie_setup_wins(void __iomem *base) { + const struct mbus_dram_target_info *dram; u32 size; int i; + dram = mv_mbus_dram_info(); + /* * First, disable and clear BARs and windows. */ @@ -150,7 +152,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base, */ size = 0; for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); writel(0, base + PCIE_WIN04_REMAP_OFF(i)); @@ -184,7 +186,7 @@ void __init orion_pcie_setup(void __iomem *base) /* * Point PCIe unit MBUS decode windows to DRAM space. */ - orion_pcie_setup_wins(base, &orion_mbus_dram_info); + orion_pcie_setup_wins(base); /* * Master + slave enable. diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a9d52167e16..91c2d72e689 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -37,14 +37,6 @@ if PLAT_SAMSUNG comment "Boot options" -config S3C_BOOT_WATCHDOG - bool "S3C Initialisation watchdog" - depends on S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - config S3C_BOOT_ERROR_RESET bool "S3C Reboot on decompression error" help @@ -125,12 +117,6 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C64XX - bool - help - Internal configuration to enable S3C64XX style GPIO configuration - functions. - config S5P_GPIO_DRVSTR bool help diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 71d58ddea9c..ec0d731b0e7 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -23,23 +23,15 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct device *dev, char *ch_name) { dma_cap_mask_t mask; - void *filter_param; dma_cap_zero(mask); dma_cap_set(param->cap, mask); - /* - * If a dma channel property of a device node from device tree is - * specified, use that as the fliter parameter. - */ - filter_param = (dma_ch == DMACH_DT_PROP) ? - (void *)param->dt_dmach_prop : (void *)dma_ch; - if (dev->of_node) return (unsigned)dma_request_slave_channel(dev, ch_name); else return (unsigned)dma_request_channel(mask, pl330_filter, - filter_param); + (void *)dma_ch); } static int samsung_dmadev_release(unsigned ch, void *param) diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 114178268b7..ce6d7634b6c 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -18,7 +18,6 @@ struct samsung_dma_req { enum dma_transaction_type cap; - struct property *dt_dmach_prop; struct s3c2410_dma_client *client; }; diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index d384a8016b4..abe07fae71d 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,6 @@ * use these just as IDs. */ enum dma_ch { - DMACH_DT_PROP = -1, DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, diff --git a/arch/arm/plat-samsung/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h deleted file mode 100644 index e21a89bc26c..00000000000 --- a/arch/arm/plat-samsung/include/plat/irq.h +++ /dev/null @@ -1,116 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/irq.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C24XX CPU IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) - -/* these are exported for arch/arm/mach-* usage */ -extern struct irq_chip s3c_irq_level_chip; -extern struct irq_chip s3c_irq_chip; - -static inline void s3c_irqsub_mask(unsigned int irqno, - unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) - __raw_writel(mask | parentbit, S3C2410_INTMSK); - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void s3c_irqsub_unmask(unsigned int irqno, - unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void s3c_irqsub_maskack(unsigned int irqno, - unsigned int parentmask, - unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void s3c_irqsub_ack(unsigned int irqno, - unsigned int parentmask, - unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -/* exported for use in arch/arm/mach-s3c2410 */ - -#ifdef CONFIG_PM -extern int s3c_irq_wake(struct irq_data *data, unsigned int state); -#else -#define s3c_irq_wake NULL -#endif - -extern int s3c_irqext_type(struct irq_data *d, unsigned int type); diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h index 21d8594d37c..7b542f7b793 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/plat-samsung/include/plat/rtc-core.h @@ -19,7 +19,7 @@ /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) +#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; #endif } diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h deleted file mode 100644 index 55b0e5f51e9..00000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2410.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2410 machine directory - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#ifdef CONFIG_CPU_S3C2410 - -extern int s3c2410_init(void); -extern int s3c2410a_init(void); - -extern void s3c2410_map_io(void); - -extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2410_init_clocks(int xtal); - -#else -#define s3c2410_init_clocks NULL -#define s3c2410_init_uarts NULL -#define s3c2410_map_io NULL -#define s3c2410_init NULL -#define s3c2410a_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h deleted file mode 100644 index cbae50ddacc..00000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2412.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2412 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_init(void); - -extern void s3c2412_map_io(void); - -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2412_init_clocks(int xtal); - -extern int s3c2412_baseclk_add(void); - -extern void s3c2412_restart(char mode, const char *cmd); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#define s3c2412_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h deleted file mode 100644 index f27399a3c68..00000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2416.h +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> - * - * Header file for s3c2416 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2416 - -struct s3c2410_uartcfg; - -extern int s3c2416_init(void); - -extern void s3c2416_map_io(void); - -extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2416_init_clocks(int xtal); - -extern int s3c2416_baseclk_add(void); - -extern void s3c2416_restart(char mode, const char *cmd); - -extern void s3c2416_init_irq(void); -extern struct syscore_ops s3c2416_irq_syscore_ops; - -#else -#define s3c2416_init_clocks NULL -#define s3c2416_init_uarts NULL -#define s3c2416_map_io NULL -#define s3c2416_init NULL -#define s3c2416_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h deleted file mode 100644 index 71b88ec4895..00000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2443 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2443 - -struct s3c2410_uartcfg; - -extern int s3c2443_init(void); - -extern void s3c2443_map_io(void); - -extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2443_init_clocks(int xtal); - -extern int s3c2443_baseclk_add(void); - -extern void s3c2443_restart(char mode, const char *cmd); - -extern void s3c2443_init_irq(void); -#else -#define s3c2443_init_clocks NULL -#define s3c2443_init_uarts NULL -#define s3c2443_map_io NULL -#define s3c2443_init NULL -#define s3c2443_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h deleted file mode 100644 index ea0c961b760..00000000000 --- a/arch/arm/plat-samsung/include/plat/s3c244x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2440 and S3C2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -extern void s3c244x_map_io(void); - -extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c244x_init_clocks(int xtal); - -#else -#define s3c244x_init_clocks NULL -#define s3c244x_init_uarts NULL -#endif - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); - -extern void s3c2440_map_io(void); -#else -#define s3c2440_init NULL -#define s3c2440_map_io NULL -#endif - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); - -extern void s3c2442_map_io(void); -#else -#define s3c2442_init NULL -#define s3c2442_map_io NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 9b87f38fc4f..5560586abec 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -206,7 +206,7 @@ static inline void s3c6400_default_sdhci2(void) { } /* S5P64X0 SDHCI setup */ -#ifdef CONFIG_S5P64X0_SETUP_SDHCI +#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO static inline void s5p64x0_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC @@ -241,7 +241,7 @@ static inline void s5p64x0_default_sdhci1(void) { } static inline void s5p6440_default_sdhci2(void) { } static inline void s5p6450_default_sdhci2(void) { } -#endif /* CONFIG_S5P64X0_SETUP_SDHCI */ +#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */ /* S5PC100 SDHCI setup */ diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2ba..5d205e74e49 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> @@ -23,8 +24,6 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50..fafdb059043 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index f2ac1556177..1e1b2d76974 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit versatile_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index a47e6ee98b8..a64caefdba1 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -63,6 +63,14 @@ config CLK_TWL6040 McPDM. McPDM module is using the external bit clock on the McPDM bus as functional clock. +config COMMON_CLK_AXI_CLKGEN + tristate "AXI clkgen driver" + depends on ARCH_ZYNQ || MICROBLAZE + help + ---help--- + Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx + FPGAs. It is commonly used in Analog Devices' reference designs. + endmenu source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 300d4775d92..79e98e41672 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o obj-$(CONFIG_COMMON_CLK) += clk-gate.o obj-$(CONFIG_COMMON_CLK) += clk-mux.o +obj-$(CONFIG_COMMON_CLK) += clk-composite.o # SoCs specific obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o @@ -23,6 +24,7 @@ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o @@ -31,6 +33,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_X86) += x86/ # Chip specific +obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c new file mode 100644 index 00000000000..8137327847c --- /dev/null +++ b/drivers/clk/clk-axi-clkgen.c @@ -0,0 +1,331 @@ +/* + * AXI clkgen driver + * + * Copyright 2012-2013 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + * + */ + +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/err.h> + +#define AXI_CLKGEN_REG_UPDATE_ENABLE 0x04 +#define AXI_CLKGEN_REG_CLK_OUT1 0x08 +#define AXI_CLKGEN_REG_CLK_OUT2 0x0c +#define AXI_CLKGEN_REG_CLK_DIV 0x10 +#define AXI_CLKGEN_REG_CLK_FB1 0x14 +#define AXI_CLKGEN_REG_CLK_FB2 0x18 +#define AXI_CLKGEN_REG_LOCK1 0x1c +#define AXI_CLKGEN_REG_LOCK2 0x20 +#define AXI_CLKGEN_REG_LOCK3 0x24 +#define AXI_CLKGEN_REG_FILTER1 0x28 +#define AXI_CLKGEN_REG_FILTER2 0x2c + +struct axi_clkgen { + void __iomem *base; + struct clk_hw clk_hw; +}; + +static uint32_t axi_clkgen_lookup_filter(unsigned int m) +{ + switch (m) { + case 0: + return 0x01001990; + case 1: + return 0x01001190; + case 2: + return 0x01009890; + case 3: + return 0x01001890; + case 4: + return 0x01008890; + case 5 ... 8: + return 0x01009090; + case 9 ... 11: + return 0x01000890; + case 12: + return 0x08009090; + case 13 ... 22: + return 0x01001090; + case 23 ... 36: + return 0x01008090; + case 37 ... 46: + return 0x08001090; + default: + return 0x08008090; + } +} + +static const uint32_t axi_clkgen_lock_table[] = { + 0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8, + 0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8, + 0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339, + 0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271, + 0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4, + 0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190, + 0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e, + 0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c, + 0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113, +}; + +static uint32_t axi_clkgen_lookup_lock(unsigned int m) +{ + if (m < ARRAY_SIZE(axi_clkgen_lock_table)) + return axi_clkgen_lock_table[m]; + return 0x1f1f00fa; +} + +static const unsigned int fpfd_min = 10000; +static const unsigned int fpfd_max = 300000; +static const unsigned int fvco_min = 600000; +static const unsigned int fvco_max = 1200000; + +static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout, + unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout) +{ + unsigned long d, d_min, d_max, _d_min, _d_max; + unsigned long m, m_min, m_max; + unsigned long f, dout, best_f, fvco; + + fin /= 1000; + fout /= 1000; + + best_f = ULONG_MAX; + *best_d = 0; + *best_m = 0; + *best_dout = 0; + + d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1); + d_max = min_t(unsigned long, fin / fpfd_min, 80); + + m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1); + m_max = min_t(unsigned long, fvco_max * d_max / fin, 64); + + for (m = m_min; m <= m_max; m++) { + _d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max)); + _d_max = min(d_max, fin * m / fvco_min); + + for (d = _d_min; d <= _d_max; d++) { + fvco = fin * m / d; + + dout = DIV_ROUND_CLOSEST(fvco, fout); + dout = clamp_t(unsigned long, dout, 1, 128); + f = fvco / dout; + if (abs(f - fout) < abs(best_f - fout)) { + best_f = f; + *best_d = d; + *best_m = m; + *best_dout = dout; + if (best_f == fout) + return; + } + } + } +} + +static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low, + unsigned int *high, unsigned int *edge, unsigned int *nocount) +{ + if (divider == 1) + *nocount = 1; + else + *nocount = 0; + + *high = divider / 2; + *edge = divider % 2; + *low = divider - *high; +} + +static void axi_clkgen_write(struct axi_clkgen *axi_clkgen, + unsigned int reg, unsigned int val) +{ + writel(val, axi_clkgen->base + reg); +} + +static void axi_clkgen_read(struct axi_clkgen *axi_clkgen, + unsigned int reg, unsigned int *val) +{ + *val = readl(axi_clkgen->base + reg); +} + +static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw) +{ + return container_of(clk_hw, struct axi_clkgen, clk_hw); +} + +static int axi_clkgen_set_rate(struct clk_hw *clk_hw, + unsigned long rate, unsigned long parent_rate) +{ + struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw); + unsigned int d, m, dout; + unsigned int nocount; + unsigned int high; + unsigned int edge; + unsigned int low; + uint32_t filter; + uint32_t lock; + + if (parent_rate == 0 || rate == 0) + return -EINVAL; + + axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout); + + if (d == 0 || dout == 0 || m == 0) + return -EINVAL; + + filter = axi_clkgen_lookup_filter(m - 1); + lock = axi_clkgen_lookup_lock(m - 1); + + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0); + + axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, + (high << 6) | low); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2, + (edge << 7) | (nocount << 6)); + + axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, + (edge << 13) | (nocount << 12) | (high << 6) | low); + + axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, + (high << 6) | low); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2, + (edge << 7) | (nocount << 6)); + + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2, + (((lock >> 16) & 0x1f) << 10) | 0x1); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3, + (((lock >> 24) & 0x1f) << 10) | 0x3e9); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter); + + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1); + + return 0; +} + +static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned int d, m, dout; + + axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout); + + if (d == 0 || dout == 0 || m == 0) + return -EINVAL; + + return *parent_rate / d * m / dout; +} + +static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw, + unsigned long parent_rate) +{ + struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw); + unsigned int d, m, dout; + unsigned int reg; + unsigned long long tmp; + + axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, ®); + dout = (reg & 0x3f) + ((reg >> 6) & 0x3f); + axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, ®); + d = (reg & 0x3f) + ((reg >> 6) & 0x3f); + axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, ®); + m = (reg & 0x3f) + ((reg >> 6) & 0x3f); + + if (d == 0 || dout == 0) + return 0; + + tmp = (unsigned long long)(parent_rate / d) * m; + do_div(tmp, dout); + + if (tmp > ULONG_MAX) + return ULONG_MAX; + + return tmp; +} + +static const struct clk_ops axi_clkgen_ops = { + .recalc_rate = axi_clkgen_recalc_rate, + .round_rate = axi_clkgen_round_rate, + .set_rate = axi_clkgen_set_rate, +}; + +static int axi_clkgen_probe(struct platform_device *pdev) +{ + struct axi_clkgen *axi_clkgen; + struct clk_init_data init; + const char *parent_name; + const char *clk_name; + struct resource *mem; + struct clk *clk; + + axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL); + if (!axi_clkgen) + return -ENOMEM; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(axi_clkgen->base)) + return PTR_ERR(axi_clkgen->base); + + parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0); + if (!parent_name) + return -EINVAL; + + clk_name = pdev->dev.of_node->name; + of_property_read_string(pdev->dev.of_node, "clock-output-names", + &clk_name); + + init.name = clk_name; + init.ops = &axi_clkgen_ops; + init.flags = 0; + init.parent_names = &parent_name; + init.num_parents = 1; + + axi_clkgen->clk_hw.init = &init; + clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, + clk); +} + +static int axi_clkgen_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + + return 0; +} + +static const struct of_device_id axi_clkgen_ids[] = { + { .compatible = "adi,axi-clkgen-1.00.a" }, + { }, +}; +MODULE_DEVICE_TABLE(of, axi_clkgen_ids); + +static struct platform_driver axi_clkgen_driver = { + .driver = { + .name = "adi-axi-clkgen", + .owner = THIS_MODULE, + .of_match_table = axi_clkgen_ids, + }, + .probe = axi_clkgen_probe, + .remove = axi_clkgen_remove, +}; +module_platform_driver(axi_clkgen_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator"); diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c new file mode 100644 index 00000000000..097dee4fd20 --- /dev/null +++ b/drivers/clk/clk-composite.c @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2013 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/slab.h> + +#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw) + +static u8 clk_composite_get_parent(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *mux_ops = composite->mux_ops; + struct clk_hw *mux_hw = composite->mux_hw; + + mux_hw->clk = hw->clk; + + return mux_ops->get_parent(mux_hw); +} + +static int clk_composite_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *mux_ops = composite->mux_ops; + struct clk_hw *mux_hw = composite->mux_hw; + + mux_hw->clk = hw->clk; + + return mux_ops->set_parent(mux_hw, index); +} + +static unsigned long clk_composite_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *div_ops = composite->div_ops; + struct clk_hw *div_hw = composite->div_hw; + + div_hw->clk = hw->clk; + + return div_ops->recalc_rate(div_hw, parent_rate); +} + +static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *div_ops = composite->div_ops; + struct clk_hw *div_hw = composite->div_hw; + + div_hw->clk = hw->clk; + + return div_ops->round_rate(div_hw, rate, prate); +} + +static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *div_ops = composite->div_ops; + struct clk_hw *div_hw = composite->div_hw; + + div_hw->clk = hw->clk; + + return div_ops->set_rate(div_hw, rate, parent_rate); +} + +static int clk_composite_is_enabled(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *gate_ops = composite->gate_ops; + struct clk_hw *gate_hw = composite->gate_hw; + + gate_hw->clk = hw->clk; + + return gate_ops->is_enabled(gate_hw); +} + +static int clk_composite_enable(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *gate_ops = composite->gate_ops; + struct clk_hw *gate_hw = composite->gate_hw; + + gate_hw->clk = hw->clk; + + return gate_ops->enable(gate_hw); +} + +static void clk_composite_disable(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *gate_ops = composite->gate_ops; + struct clk_hw *gate_hw = composite->gate_hw; + + gate_hw->clk = hw->clk; + + gate_ops->disable(gate_hw); +} + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *div_hw, const struct clk_ops *div_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags) +{ + struct clk *clk; + struct clk_init_data init; + struct clk_composite *composite; + struct clk_ops *clk_composite_ops; + + composite = kzalloc(sizeof(*composite), GFP_KERNEL); + if (!composite) { + pr_err("%s: could not allocate composite clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + clk_composite_ops = &composite->ops; + + if (mux_hw && mux_ops) { + if (!mux_ops->get_parent || !mux_ops->set_parent) { + clk = ERR_PTR(-EINVAL); + goto err; + } + + composite->mux_hw = mux_hw; + composite->mux_ops = mux_ops; + clk_composite_ops->get_parent = clk_composite_get_parent; + clk_composite_ops->set_parent = clk_composite_set_parent; + } + + if (div_hw && div_ops) { + if (!div_ops->recalc_rate || !div_ops->round_rate || + !div_ops->set_rate) { + clk = ERR_PTR(-EINVAL); + goto err; + } + + composite->div_hw = div_hw; + composite->div_ops = div_ops; + clk_composite_ops->recalc_rate = clk_composite_recalc_rate; + clk_composite_ops->round_rate = clk_composite_round_rate; + clk_composite_ops->set_rate = clk_composite_set_rate; + } + + if (gate_hw && gate_ops) { + if (!gate_ops->is_enabled || !gate_ops->enable || + !gate_ops->disable) { + clk = ERR_PTR(-EINVAL); + goto err; + } + + composite->gate_hw = gate_hw; + composite->gate_ops = gate_ops; + clk_composite_ops->is_enabled = clk_composite_is_enabled; + clk_composite_ops->enable = clk_composite_enable; + clk_composite_ops->disable = clk_composite_disable; + } + + init.ops = clk_composite_ops; + composite->hw.init = &init; + + clk = clk_register(dev, &composite->hw); + if (IS_ERR(clk)) + goto err; + + if (composite->mux_hw) + composite->mux_hw->clk = clk; + + if (composite->div_hw) + composite->div_hw->clk = clk; + + if (composite->gate_hw) + composite->gate_hw->clk = clk; + + return clk; + +err: + kfree(composite); + return clk; +} diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 68b40210117..6d967416043 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -109,8 +109,9 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, div = _get_div(divider, val); if (!div) { - WARN(1, "%s: Invalid divisor for clock %s\n", __func__, - __clk_get_name(hw->clk)); + WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO), + "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n", + __clk_get_name(hw->clk)); return parent_rate; } diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 508c032edce..25b1734560d 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -32,6 +32,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) { struct clk_mux *mux = to_clk_mux(hw); + int num_parents = __clk_get_num_parents(hw->clk); u32 val; /* @@ -42,7 +43,16 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) * val = 0x4 really means "bit 2, index starts at bit 0" */ val = readl(mux->reg) >> mux->shift; - val &= (1 << mux->width) - 1; + val &= mux->mask; + + if (mux->table) { + int i; + + for (i = 0; i < num_parents; i++) + if (mux->table[i] == val) + return i; + return -EINVAL; + } if (val && (mux->flags & CLK_MUX_INDEX_BIT)) val = ffs(val) - 1; @@ -50,7 +60,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) if (val && (mux->flags & CLK_MUX_INDEX_ONE)) val--; - if (val >= __clk_get_num_parents(hw->clk)) + if (val >= num_parents) return -EINVAL; return val; @@ -62,17 +72,22 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) u32 val; unsigned long flags = 0; - if (mux->flags & CLK_MUX_INDEX_BIT) - index = (1 << ffs(index)); + if (mux->table) + index = mux->table[index]; - if (mux->flags & CLK_MUX_INDEX_ONE) - index++; + else { + if (mux->flags & CLK_MUX_INDEX_BIT) + index = (1 << ffs(index)); + + if (mux->flags & CLK_MUX_INDEX_ONE) + index++; + } if (mux->lock) spin_lock_irqsave(mux->lock, flags); val = readl(mux->reg); - val &= ~(((1 << mux->width) - 1) << mux->shift); + val &= ~(mux->mask << mux->shift); val |= index << mux->shift; writel(val, mux->reg); @@ -88,10 +103,10 @@ const struct clk_ops clk_mux_ops = { }; EXPORT_SYMBOL_GPL(clk_mux_ops); -struct clk *clk_register_mux(struct device *dev, const char *name, +struct clk *clk_register_mux_table(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, - void __iomem *reg, u8 shift, u8 width, - u8 clk_mux_flags, spinlock_t *lock) + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock) { struct clk_mux *mux; struct clk *clk; @@ -113,9 +128,10 @@ struct clk *clk_register_mux(struct device *dev, const char *name, /* struct clk_mux assignments */ mux->reg = reg; mux->shift = shift; - mux->width = width; + mux->mask = mask; mux->flags = clk_mux_flags; mux->lock = lock; + mux->table = table; mux->hw.init = &init; clk = clk_register(dev, &mux->hw); @@ -125,3 +141,15 @@ struct clk *clk_register_mux(struct device *dev, const char *name, return clk; } + +struct clk *clk_register_mux(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock) +{ + u32 mask = BIT(width) - 1; + + return clk_register_mux_table(dev, name, parent_names, num_parents, + flags, reg, shift, mask, clk_mux_flags, + NULL, lock); +} diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c index f8e9d0c27be..643ca653fef 100644 --- a/drivers/clk/clk-prima2.c +++ b/drivers/clk/clk-prima2.c @@ -1113,7 +1113,7 @@ void __init sirfsoc_of_clk_init(void) for (i = pll1; i < maxclk; i++) { prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]); - BUG_ON(!prima2_clks[i]); + BUG_ON(IS_ERR(prima2_clks[i])); } clk_register_clkdev(prima2_clks[cpu], NULL, "cpu"); clk_register_clkdev(prima2_clks[io], NULL, "io"); diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c index b14a25f3925..32062977f45 100644 --- a/drivers/clk/clk-zynq.c +++ b/drivers/clk/clk-zynq.c @@ -20,6 +20,7 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/clk-provider.h> +#include <linux/clk/zynq.h> static void __iomem *slcr_base; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index ed87b240580..0230c9d9597 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -19,14 +19,77 @@ #include <linux/of.h> #include <linux/device.h> #include <linux/init.h> +#include <linux/sched.h> static DEFINE_SPINLOCK(enable_lock); static DEFINE_MUTEX(prepare_lock); +static struct task_struct *prepare_owner; +static struct task_struct *enable_owner; + +static int prepare_refcnt; +static int enable_refcnt; + static HLIST_HEAD(clk_root_list); static HLIST_HEAD(clk_orphan_list); static LIST_HEAD(clk_notifier_list); +/*** locking ***/ +static void clk_prepare_lock(void) +{ + if (!mutex_trylock(&prepare_lock)) { + if (prepare_owner == current) { + prepare_refcnt++; + return; + } + mutex_lock(&prepare_lock); + } + WARN_ON_ONCE(prepare_owner != NULL); + WARN_ON_ONCE(prepare_refcnt != 0); + prepare_owner = current; + prepare_refcnt = 1; +} + +static void clk_prepare_unlock(void) +{ + WARN_ON_ONCE(prepare_owner != current); + WARN_ON_ONCE(prepare_refcnt == 0); + + if (--prepare_refcnt) + return; + prepare_owner = NULL; + mutex_unlock(&prepare_lock); +} + +static unsigned long clk_enable_lock(void) +{ + unsigned long flags; + + if (!spin_trylock_irqsave(&enable_lock, flags)) { + if (enable_owner == current) { + enable_refcnt++; + return flags; + } + spin_lock_irqsave(&enable_lock, flags); + } + WARN_ON_ONCE(enable_owner != NULL); + WARN_ON_ONCE(enable_refcnt != 0); + enable_owner = current; + enable_refcnt = 1; + return flags; +} + +static void clk_enable_unlock(unsigned long flags) +{ + WARN_ON_ONCE(enable_owner != current); + WARN_ON_ONCE(enable_refcnt == 0); + + if (--enable_refcnt) + return; + enable_owner = NULL; + spin_unlock_irqrestore(&enable_lock, flags); +} + /*** debugfs support ***/ #ifdef CONFIG_COMMON_CLK_DEBUG @@ -69,7 +132,7 @@ static int clk_summary_show(struct seq_file *s, void *data) seq_printf(s, " clock enable_cnt prepare_cnt rate\n"); seq_printf(s, "---------------------------------------------------------------------\n"); - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(c, &clk_root_list, child_node) clk_summary_show_subtree(s, c, 0); @@ -77,7 +140,7 @@ static int clk_summary_show(struct seq_file *s, void *data) hlist_for_each_entry(c, &clk_orphan_list, child_node) clk_summary_show_subtree(s, c, 0); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return 0; } @@ -130,7 +193,7 @@ static int clk_dump(struct seq_file *s, void *data) seq_printf(s, "{"); - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(c, &clk_root_list, child_node) { if (!first_node) @@ -144,7 +207,7 @@ static int clk_dump(struct seq_file *s, void *data) clk_dump_subtree(s, c, 0); } - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); seq_printf(s, "}"); return 0; @@ -316,7 +379,7 @@ static int __init clk_debug_init(void) if (!orphandir) return -ENOMEM; - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(clk, &clk_root_list, child_node) clk_debug_create_subtree(clk, rootdir); @@ -326,7 +389,7 @@ static int __init clk_debug_init(void) inited = 1; - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return 0; } @@ -336,6 +399,31 @@ static inline int clk_debug_register(struct clk *clk) { return 0; } #endif /* caller must hold prepare_lock */ +static void clk_unprepare_unused_subtree(struct clk *clk) +{ + struct clk *child; + + if (!clk) + return; + + hlist_for_each_entry(child, &clk->children, child_node) + clk_unprepare_unused_subtree(child); + + if (clk->prepare_count) + return; + + if (clk->flags & CLK_IGNORE_UNUSED) + return; + + if (__clk_is_prepared(clk)) { + if (clk->ops->unprepare_unused) + clk->ops->unprepare_unused(clk->hw); + else if (clk->ops->unprepare) + clk->ops->unprepare(clk->hw); + } +} + +/* caller must hold prepare_lock */ static void clk_disable_unused_subtree(struct clk *clk) { struct clk *child; @@ -347,7 +435,7 @@ static void clk_disable_unused_subtree(struct clk *clk) hlist_for_each_entry(child, &clk->children, child_node) clk_disable_unused_subtree(child); - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); if (clk->enable_count) goto unlock_out; @@ -368,7 +456,7 @@ static void clk_disable_unused_subtree(struct clk *clk) } unlock_out: - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); out: return; @@ -378,7 +466,7 @@ static int clk_disable_unused(void) { struct clk *clk; - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(clk, &clk_root_list, child_node) clk_disable_unused_subtree(clk); @@ -386,7 +474,13 @@ static int clk_disable_unused(void) hlist_for_each_entry(clk, &clk_orphan_list, child_node) clk_disable_unused_subtree(clk); - mutex_unlock(&prepare_lock); + hlist_for_each_entry(clk, &clk_root_list, child_node) + clk_unprepare_unused_subtree(clk); + + hlist_for_each_entry(clk, &clk_orphan_list, child_node) + clk_unprepare_unused_subtree(clk); + + clk_prepare_unlock(); return 0; } @@ -451,6 +545,27 @@ unsigned long __clk_get_flags(struct clk *clk) return !clk ? 0 : clk->flags; } +bool __clk_is_prepared(struct clk *clk) +{ + int ret; + + if (!clk) + return false; + + /* + * .is_prepared is optional for clocks that can prepare + * fall back to software usage counter if it is missing + */ + if (!clk->ops->is_prepared) { + ret = clk->prepare_count ? 1 : 0; + goto out; + } + + ret = clk->ops->is_prepared(clk->hw); +out: + return !!ret; +} + bool __clk_is_enabled(struct clk *clk) { int ret; @@ -548,9 +663,9 @@ void __clk_unprepare(struct clk *clk) */ void clk_unprepare(struct clk *clk) { - mutex_lock(&prepare_lock); + clk_prepare_lock(); __clk_unprepare(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); } EXPORT_SYMBOL_GPL(clk_unprepare); @@ -596,9 +711,9 @@ int clk_prepare(struct clk *clk) { int ret; - mutex_lock(&prepare_lock); + clk_prepare_lock(); ret = __clk_prepare(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -640,9 +755,9 @@ void clk_disable(struct clk *clk) { unsigned long flags; - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); __clk_disable(clk); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); } EXPORT_SYMBOL_GPL(clk_disable); @@ -693,9 +808,9 @@ int clk_enable(struct clk *clk) unsigned long flags; int ret; - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); ret = __clk_enable(clk); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); return ret; } @@ -740,9 +855,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate) { unsigned long ret; - mutex_lock(&prepare_lock); + clk_prepare_lock(); ret = __clk_round_rate(clk, rate); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -837,13 +952,13 @@ unsigned long clk_get_rate(struct clk *clk) { unsigned long rate; - mutex_lock(&prepare_lock); + clk_prepare_lock(); if (clk && (clk->flags & CLK_GET_RATE_NOCACHE)) __clk_recalc_rates(clk, 0); rate = __clk_get_rate(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return rate; } @@ -974,7 +1089,7 @@ static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long even int ret = NOTIFY_DONE; if (clk->rate == clk->new_rate) - return 0; + return NULL; if (clk->notifier_count) { ret = __clk_notify(clk, event, clk->rate, clk->new_rate); @@ -1048,7 +1163,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) int ret = 0; /* prevent racing with updates to the clock topology */ - mutex_lock(&prepare_lock); + clk_prepare_lock(); /* bail early if nothing to do */ if (rate == clk->rate) @@ -1080,7 +1195,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk_change_rate(top); out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1096,9 +1211,9 @@ struct clk *clk_get_parent(struct clk *clk) { struct clk *parent; - mutex_lock(&prepare_lock); + clk_prepare_lock(); parent = __clk_get_parent(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return parent; } @@ -1242,19 +1357,19 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent) __clk_prepare(parent); /* FIXME replace with clk_is_enabled(clk) someday */ - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); if (clk->enable_count) __clk_enable(parent); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); /* change clock input source */ ret = clk->ops->set_parent(clk->hw, i); /* clean up old prepare and enable */ - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); if (clk->enable_count) __clk_disable(old_parent); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); if (clk->prepare_count) __clk_unprepare(old_parent); @@ -1286,7 +1401,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return -ENOSYS; /* prevent racing with updates to the clock topology */ - mutex_lock(&prepare_lock); + clk_prepare_lock(); if (clk->parent == parent) goto out; @@ -1315,7 +1430,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) __clk_reparent(clk, parent); out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1338,7 +1453,7 @@ int __clk_init(struct device *dev, struct clk *clk) if (!clk) return -EINVAL; - mutex_lock(&prepare_lock); + clk_prepare_lock(); /* check to see if a clock with this name is already registered */ if (__clk_lookup(clk->name)) { @@ -1462,7 +1577,7 @@ int __clk_init(struct device *dev, struct clk *clk) clk_debug_register(clk); out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1696,7 +1811,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb) if (!clk || !nb) return -EINVAL; - mutex_lock(&prepare_lock); + clk_prepare_lock(); /* search the list of notifiers for this clk */ list_for_each_entry(cn, &clk_notifier_list, node) @@ -1720,7 +1835,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb) clk->notifier_count++; out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1745,7 +1860,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) if (!clk || !nb) return -EINVAL; - mutex_lock(&prepare_lock); + clk_prepare_lock(); list_for_each_entry(cn, &clk_notifier_list, node) if (cn->clk == clk) @@ -1766,7 +1881,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) ret = -ENOENT; } - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index 9dd2551a0a4..b0fbc071549 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -16,7 +16,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/delay.h> -#include "clk-cpu.h" #define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET 0x0 #define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET 0xC @@ -173,17 +172,5 @@ clks_out: kfree(cpuclk); } -static const __initconst struct of_device_id clk_cpu_match[] = { - { - .compatible = "marvell,armada-xp-cpu-clock", - .data = of_cpu_clk_setup, - }, - { - /* sentinel */ - }, -}; - -void __init mvebu_cpu_clk_init(void) -{ - of_clk_init(clk_cpu_match); -} +CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock", + of_cpu_clk_setup); diff --git a/drivers/clk/mvebu/clk-cpu.h b/drivers/clk/mvebu/clk-cpu.h deleted file mode 100644 index 08e2affba4e..00000000000 --- a/drivers/clk/mvebu/clk-cpu.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Marvell MVEBU CPU clock handling. - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MVEBU_CLK_CPU_H -#define __MVEBU_CLK_CPU_H - -#ifdef CONFIG_MVEBU_CLK_CPU -void __init mvebu_cpu_clk_init(void); -#else -static inline void mvebu_cpu_clk_init(void) {} -#endif - -#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c index 855681b8a9d..29f10fb3006 100644 --- a/drivers/clk/mvebu/clk.c +++ b/drivers/clk/mvebu/clk.c @@ -10,18 +10,14 @@ * warranty of any kind, whether express or implied. */ #include <linux/kernel.h> -#include <linux/clk.h> #include <linux/clk-provider.h> -#include <linux/of_address.h> -#include <linux/clk/mvebu.h> #include <linux/of.h> #include "clk-core.h" -#include "clk-cpu.h" #include "clk-gating-ctrl.h" void __init mvebu_clocks_init(void) { mvebu_core_clk_init(); mvebu_gating_clk_init(); - mvebu_cpu_clk_init(); + of_clk_init(NULL); } diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index b5c06f9766f..f6a74872f14 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -15,12 +15,15 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/of.h> -#include <mach/common.h> -#include <mach/mx23.h> +#include <linux/of_address.h> #include "clk.h" -#define DIGCTRL MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR) -#define CLKCTRL MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR) +static void __iomem *clkctrl; +static void __iomem *digctrl; + +#define CLKCTRL clkctrl +#define DIGCTRL digctrl + #define PLLCTRL0 (CLKCTRL + 0x0000) #define CPU (CLKCTRL + 0x0020) #define HBUS (CLKCTRL + 0x0030) @@ -48,10 +51,10 @@ static void __init clk_misc_init(void) u32 val; /* Gate off cpu clock in WFI for power saving */ - __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU); + writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET); /* Clear BYPASS for SAIF */ - __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ); + writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR); /* SAIF has to use frac div for functional operation */ val = readl_relaxed(SAIF); @@ -62,14 +65,14 @@ static void __init clk_misc_init(void) * Source ssp clock from ref_io than ref_xtal, * as ref_xtal only provides 24 MHz as maximum. */ - __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ); + writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR); /* * 480 MHz seems too high to be ssp clock source directly, * so set frac to get a 288 MHz ref_io. */ - __mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC); - __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); + writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR); + writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET); } static const char *sel_pll[] __initconst = { "pll", "ref_xtal", }; @@ -101,6 +104,14 @@ int __init mx23_clocks_init(void) struct device_node *np; u32 i; + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); + digctrl = of_iomap(np, 0); + WARN_ON(!digctrl); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); + clkctrl = of_iomap(np, 0); + WARN_ON(!clkctrl); + clk_misc_init(); clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000); @@ -153,19 +164,12 @@ int __init mx23_clocks_init(void) return PTR_ERR(clks[i]); } - np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); - if (np) { - clk_data.clks = clks; - clk_data.clk_num = ARRAY_SIZE(clks); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - } - - clk_register_clkdev(clks[clk32k], NULL, "timrot"); + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - mxs_timer_init(); - return 0; } diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 76ce6c6d111..d0e5eed146d 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -15,11 +15,12 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/of.h> -#include <mach/common.h> -#include <mach/mx28.h> +#include <linux/of_address.h> #include "clk.h" -#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR) +static void __iomem *clkctrl; +#define CLKCTRL clkctrl + #define PLL0CTRL0 (CLKCTRL + 0x0000) #define PLL1CTRL0 (CLKCTRL + 0x0020) #define PLL2CTRL0 (CLKCTRL + 0x0040) @@ -53,7 +54,8 @@ #define BP_FRAC0_IO1FRAC 16 #define BP_FRAC0_IO0FRAC 24 -#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) +static void __iomem *digctrl; +#define DIGCTRL digctrl #define BP_SAIF_CLKMUX 10 /* @@ -72,8 +74,8 @@ int mxs_saif_clkmux_select(unsigned int clkmux) if (clkmux > 0x3) return -EINVAL; - __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL); - __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL); + writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR); + writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET); return 0; } @@ -83,13 +85,13 @@ static void __init clk_misc_init(void) u32 val; /* Gate off cpu clock in WFI for power saving */ - __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU); + writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET); /* 0 is a bad default value for a divider */ - __mxs_setl(1 << BP_ENET_DIV_TIME, ENET); + writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET); /* Clear BYPASS for SAIF */ - __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ); + writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR); /* SAIF has to use frac div for functional operation */ val = readl_relaxed(SAIF0); @@ -109,7 +111,7 @@ static void __init clk_misc_init(void) * Source ssp clock from ref_io than ref_xtal, * as ref_xtal only provides 24 MHz as maximum. */ - __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ); + writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR); /* * 480 MHz seems too high to be ssp clock source directly, @@ -156,6 +158,14 @@ int __init mx28_clocks_init(void) struct device_node *np; u32 i; + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl"); + digctrl = of_iomap(np, 0); + WARN_ON(!digctrl); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); + clkctrl = of_iomap(np, 0); + WARN_ON(!clkctrl); + clk_misc_init(); clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000); @@ -231,20 +241,14 @@ int __init mx28_clocks_init(void) return PTR_ERR(clks[i]); } - np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); - if (np) { - clk_data.clks = clks; - clk_data.clk_num = ARRAY_SIZE(clks); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - } + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - clk_register_clkdev(clks[xbus], NULL, "timrot"); clk_register_clkdev(clks[enet_out], NULL, "enet_out"); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - mxs_timer_init(); - return 0; } diff --git a/drivers/clk/mxs/clk.c b/drivers/clk/mxs/clk.c index b24d56067c8..5301bce8957 100644 --- a/drivers/clk/mxs/clk.c +++ b/drivers/clk/mxs/clk.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <linux/jiffies.h> #include <linux/spinlock.h> +#include "clk.h" DEFINE_SPINLOCK(mxs_lock); diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 82abea366b7..35e7e2698e1 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -960,47 +960,47 @@ void __init spear1340_clk_init(void) SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0100000.spdif-in"); - clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0, + clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "acp_clk"); - clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0, + clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e2800000.gpio"); - clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0, + clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "video_dec"); - clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0, + clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "video_enc"); - clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0, + clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_vip"); - clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0, + clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0200000.cam0"); - clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0, + clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0300000.cam1"); - clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0, + clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0400000.cam2"); - clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0, + clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0500000.cam3"); diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile new file mode 100644 index 00000000000..b5bac917612 --- /dev/null +++ b/drivers/clk/sunxi/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for sunxi specific clk +# + +obj-y += clk-sunxi.o clk-factors.o diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c new file mode 100644 index 00000000000..88523f91d9b --- /dev/null +++ b/drivers/clk/sunxi/clk-factors.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adjustable factor-based clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/string.h> + +#include <linux/delay.h> + +#include "clk-factors.h" + +/* + * DOC: basic adjustable factor-based clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. + * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1) + * parent - fixed parent. No clk_set_parent support + */ + +struct clk_factors { + struct clk_hw hw; + void __iomem *reg; + struct clk_factors_config *config; + void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); + spinlock_t *lock; +}; + +#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) + +#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos)) +#define CLRMASK(len, pos) (~(SETMASK(len, pos))) +#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) + +#define FACTOR_SET(bit, len, reg, val) \ + (((reg) & CLRMASK(len, bit)) | (val << (bit))) + +static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u8 n = 1, k = 0, p = 0, m = 0; + u32 reg; + unsigned long rate; + struct clk_factors *factors = to_clk_factors(hw); + struct clk_factors_config *config = factors->config; + + /* Fetch the register value */ + reg = readl(factors->reg); + + /* Get each individual factor if applicable */ + if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE) + n = FACTOR_GET(config->nshift, config->nwidth, reg); + if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE) + k = FACTOR_GET(config->kshift, config->kwidth, reg); + if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE) + m = FACTOR_GET(config->mshift, config->mwidth, reg); + if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE) + p = FACTOR_GET(config->pshift, config->pwidth, reg); + + /* Calculate the rate */ + rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + + return rate; +} + +static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_factors *factors = to_clk_factors(hw); + factors->get_factors((u32 *)&rate, (u32)*parent_rate, + NULL, NULL, NULL, NULL); + + return rate; +} + +static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u8 n, k, m, p; + u32 reg; + struct clk_factors *factors = to_clk_factors(hw); + struct clk_factors_config *config = factors->config; + unsigned long flags = 0; + + factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p); + + if (factors->lock) + spin_lock_irqsave(factors->lock, flags); + + /* Fetch the register value */ + reg = readl(factors->reg); + + /* Set up the new factors - macros do not do anything if width is 0 */ + reg = FACTOR_SET(config->nshift, config->nwidth, reg, n); + reg = FACTOR_SET(config->kshift, config->kwidth, reg, k); + reg = FACTOR_SET(config->mshift, config->mwidth, reg, m); + reg = FACTOR_SET(config->pshift, config->pwidth, reg, p); + + /* Apply them now */ + writel(reg, factors->reg); + + /* delay 500us so pll stabilizes */ + __delay((rate >> 20) * 500 / 2); + + if (factors->lock) + spin_unlock_irqrestore(factors->lock, flags); + + return 0; +} + +static const struct clk_ops clk_factors_ops = { + .recalc_rate = clk_factors_recalc_rate, + .round_rate = clk_factors_round_rate, + .set_rate = clk_factors_set_rate, +}; + +/** + * clk_register_factors - register a factors clock with + * the clock framework + * @dev: device registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @reg: register address to adjust factors + * @config: shift and width of factors n, k, m and p + * @get_factors: function to calculate the factors for a given frequency + * @lock: shared register lock for this clock + */ +struct clk *clk_register_factors(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + struct clk_factors_config *config, + void (*get_factors)(u32 *rate, u32 parent, + u8 *n, u8 *k, u8 *m, u8 *p), + spinlock_t *lock) +{ + struct clk_factors *factors; + struct clk *clk; + struct clk_init_data init; + + /* allocate the factors */ + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) { + pr_err("%s: could not allocate factors clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &clk_factors_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + /* struct clk_factors assignments */ + factors->reg = reg; + factors->config = config; + factors->lock = lock; + factors->hw.init = &init; + factors->get_factors = get_factors; + + /* register the clock */ + clk = clk_register(dev, &factors->hw); + + if (IS_ERR(clk)) + kfree(factors); + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h new file mode 100644 index 00000000000..f49851cc438 --- /dev/null +++ b/drivers/clk/sunxi/clk-factors.h @@ -0,0 +1,27 @@ +#ifndef __MACH_SUNXI_CLK_FACTORS_H +#define __MACH_SUNXI_CLK_FACTORS_H + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + +#define SUNXI_FACTORS_NOT_APPLICABLE (0) + +struct clk_factors_config { + u8 nshift; + u8 nwidth; + u8 kshift; + u8 kwidth; + u8 mshift; + u8 mwidth; + u8 pshift; + u8 pwidth; +}; + +struct clk *clk_register_factors(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + struct clk_factors_config *config, + void (*get_factors) (u32 *rate, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p), + spinlock_t *lock); +#endif diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c new file mode 100644 index 00000000000..0bb0eb4ed21 --- /dev/null +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -0,0 +1,450 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/sunxi.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +static DEFINE_SPINLOCK(clk_lock); + +/** + * sunxi_osc_clk_setup() - Setup function for gatable oscillator + */ + +#define SUNXI_OSC24M_GATE 0 + +static void __init sunxi_osc_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent; + void *reg; + + reg = of_iomap(node, 0); + + parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_gate(NULL, clk_name, parent, 0, reg, + SUNXI_OSC24M_GATE, 0, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1 + * PLL1 rate is calculated as follows + * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + * parent_rate is always 24Mhz + */ + +static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* Normalize value to a 6M multiple */ + div = *freq / 6000000; + *freq = 6000000 * div; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + /* m is always zero for pll1 */ + *m = 0; + + /* k is 1 only on these cases */ + if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000) + *k = 1; + else + *k = 0; + + /* p will be 3 for divs under 10 */ + if (div < 10) + *p = 3; + + /* p will be 2 for divs between 10 - 20 and odd divs under 32 */ + else if (div < 20 || (div < 32 && (div & 1))) + *p = 2; + + /* p will be 1 for even divs under 32, divs under 40 and odd pairs + * of divs between 40-62 */ + else if (div < 40 || (div < 64 && (div & 2))) + *p = 1; + + /* any other entries have p = 0 */ + else + *p = 0; + + /* calculate a suitable n based on k and p */ + div <<= *p; + div /= (*k + 1); + *n = div / 4; +} + + + +/** + * sunxi_get_apb1_factors() - calculates m, p factors for APB1 + * APB1 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 calcm, calcp; + + if (parent_rate < *freq) + *freq = parent_rate; + + parent_rate = (parent_rate + (*freq - 1)) / *freq; + + /* Invalid rate! */ + if (parent_rate > 32) + return; + + if (parent_rate <= 4) + calcp = 0; + else if (parent_rate <= 8) + calcp = 1; + else if (parent_rate <= 16) + calcp = 2; + else + calcp = 3; + + calcm = (parent_rate >> calcp) - 1; + + *freq = (parent_rate >> calcp) / (calcm + 1); + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm; + *p = calcp; +} + + + +/** + * sunxi_factors_clk_setup() - Setup function for factor clocks + */ + +struct factors_data { + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); +}; + +static struct clk_factors_config pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .pshift = 16, + .pwidth = 2, +}; + +static struct clk_factors_config apb1_config = { + .mshift = 0, + .mwidth = 5, + .pshift = 16, + .pwidth = 2, +}; + +static const __initconst struct factors_data pll1_data = { + .table = &pll1_config, + .getter = sunxi_get_pll1_factors, +}; + +static const __initconst struct factors_data apb1_data = { + .table = &apb1_config, + .getter = sunxi_get_apb1_factors, +}; + +static void __init sunxi_factors_clk_setup(struct device_node *node, + struct factors_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent; + void *reg; + + reg = of_iomap(node, 0); + + parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_factors(NULL, clk_name, parent, 0, reg, + data->table, data->getter, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_mux_clk_setup() - Setup function for muxes + */ + +#define SUNXI_MUX_GATE_WIDTH 2 + +struct mux_data { + u8 shift; +}; + +static const __initconst struct mux_data cpu_data = { + .shift = 16, +}; + +static const __initconst struct mux_data apb1_mux_data = { + .shift = 24, +}; + +static void __init sunxi_mux_clk_setup(struct device_node *node, + struct mux_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parents[5]; + void *reg; + int i = 0; + + reg = of_iomap(node, 0); + + while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg, + data->shift, SUNXI_MUX_GATE_WIDTH, + 0, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_divider_clk_setup() - Setup function for simple divider clocks + */ + +#define SUNXI_DIVISOR_WIDTH 2 + +struct div_data { + u8 shift; + u8 pow; +}; + +static const __initconst struct div_data axi_data = { + .shift = 0, + .pow = 0, +}; + +static const __initconst struct div_data ahb_data = { + .shift = 4, + .pow = 1, +}; + +static const __initconst struct div_data apb0_data = { + .shift = 8, + .pow = 1, +}; + +static void __init sunxi_divider_clk_setup(struct device_node *node, + struct div_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *clk_parent; + void *reg; + + reg = of_iomap(node, 0); + + clk_parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_divider(NULL, clk_name, clk_parent, 0, + reg, data->shift, SUNXI_DIVISOR_WIDTH, + data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, + &clk_lock); + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks + */ + +#define SUNXI_GATES_MAX_SIZE 64 + +struct gates_data { + DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); +}; + +static const __initconst struct gates_data axi_gates_data = { + .mask = {1}, +}; + +static const __initconst struct gates_data ahb_gates_data = { + .mask = {0x7F77FFF, 0x14FB3F}, +}; + +static const __initconst struct gates_data apb0_gates_data = { + .mask = {0x4EF}, +}; + +static const __initconst struct gates_data apb1_gates_data = { + .mask = {0xFF00F7}, +}; + +static void __init sunxi_gates_clk_setup(struct device_node *node, + struct gates_data *data) +{ + struct clk_onecell_data *clk_data; + const char *clk_parent; + const char *clk_name; + void *reg; + int qty; + int i = 0; + int j = 0; + int ignore; + + reg = of_iomap(node, 0); + + clk_parent = of_clk_get_parent_name(node, 0); + + /* Worst-case size approximation and memory allocation */ + qty = find_last_bit(data->mask, SUNXI_GATES_MAX_SIZE); + clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!clk_data) + return; + clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL); + if (!clk_data->clks) { + kfree(clk_data); + return; + } + + for_each_set_bit(i, data->mask, SUNXI_GATES_MAX_SIZE) { + of_property_read_string_index(node, "clock-output-names", + j, &clk_name); + + /* No driver claims this clock, but it should remain gated */ + ignore = !strcmp("ahb_sdram", clk_name) ? CLK_IGNORE_UNUSED : 0; + + clk_data->clks[i] = clk_register_gate(NULL, clk_name, + clk_parent, ignore, + reg + 4 * (i/32), i % 32, + 0, &clk_lock); + WARN_ON(IS_ERR(clk_data->clks[i])); + + j++; + } + + /* Adjust to the real max */ + clk_data->clk_num = i; + + of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); +} + +/* Matches for of_clk_init */ +static const __initconst struct of_device_id clk_match[] = { + {.compatible = "fixed-clock", .data = of_fixed_clk_setup,}, + {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,}, + {} +}; + +/* Matches for factors clocks */ +static const __initconst struct of_device_id clk_factors_match[] = { + {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,}, + {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,}, + {} +}; + +/* Matches for divider clocks */ +static const __initconst struct of_device_id clk_div_match[] = { + {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,}, + {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,}, + {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,}, + {} +}; + +/* Matches for mux clocks */ +static const __initconst struct of_device_id clk_mux_match[] = { + {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,}, + {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,}, + {} +}; + +/* Matches for gate clocks */ +static const __initconst struct of_device_id clk_gates_match[] = { + {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,}, + {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,}, + {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,}, + {.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,}, + {} +}; + +static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match, + void *function) +{ + struct device_node *np; + const struct div_data *data; + const struct of_device_id *match; + void (*setup_function)(struct device_node *, const void *) = function; + + for_each_matching_node(np, clk_match) { + match = of_match_node(clk_match, np); + data = match->data; + setup_function(np, data); + } +} + +void __init sunxi_init_clocks(void) +{ + /* Register all the simple sunxi clocks on DT */ + of_clk_init(clk_match); + + /* Register factor clocks */ + of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); + + /* Register divider clocks */ + of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); + + /* Register mux clocks */ + of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); + + /* Register gate clocks */ + of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); +} diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index f873dcefe0d..bf194009e20 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -711,8 +711,8 @@ static void tegra20_pll_init(void) } static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", - "pll_p_cclk", "pll_p_out4_cclk", - "pll_p_out3_cclk", "clk_d", "pll_x" }; + "pll_p", "pll_p_out4", + "pll_p_out3", "clk_d", "pll_x" }; static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4", "pll_p_out3", "pll_p_out2", "clk_d", "clk_32k", "pll_m_out1" }; @@ -721,38 +721,6 @@ static void tegra20_super_clk_init(void) { struct clk *clk; - /* - * DIV_U71 dividers for CCLK, these dividers are used only - * if parent clock is fixed rate. - */ - - /* - * Clock input to cclk divided from pll_p using - * U71 divider of cclk. - */ - clk = tegra_clk_register_divider("pll_p_cclk", "pll_p", - clk_base + SUPER_CCLK_DIVIDER, 0, - TEGRA_DIVIDER_INT, 16, 8, 1, NULL); - clk_register_clkdev(clk, "pll_p_cclk", NULL); - - /* - * Clock input to cclk divided from pll_p_out3 using - * U71 divider of cclk. - */ - clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3", - clk_base + SUPER_CCLK_DIVIDER, 0, - TEGRA_DIVIDER_INT, 16, 8, 1, NULL); - clk_register_clkdev(clk, "pll_p_out3_cclk", NULL); - - /* - * Clock input to cclk divided from pll_p_out4 using - * U71 divider of cclk. - */ - clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4", - clk_base + SUPER_CCLK_DIVIDER, 0, - TEGRA_DIVIDER_INT, 16, 8, 1, NULL); - clk_register_clkdev(clk, "pll_p_out4_cclk", NULL); - /* CCLK */ clk = tegra_clk_register_super_mux("cclk", cclk_parents, ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT, diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 0744731c622..a09d7dcaf18 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -355,15 +355,16 @@ struct clk *tegra_clk_register_periph_nodiv(const char *name, struct tegra_clk_periph *periph, void __iomem *clk_base, u32 offset); -#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \ +#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \ _div_shift, _div_width, _div_frac_width, \ _div_flags, _clk_num, _enb_refcnt, _regs, \ - _gate_flags) \ + _gate_flags, _table) \ { \ .mux = { \ .flags = _mux_flags, \ .shift = _mux_shift, \ - .width = _mux_width, \ + .mask = _mux_mask, \ + .table = _table, \ }, \ .divider = { \ .flags = _div_flags, \ @@ -393,26 +394,36 @@ struct tegra_periph_init_data { const char *dev_id; }; -#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \ - _mux_shift, _mux_width, _mux_flags, _div_shift, \ +#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ + _mux_shift, _mux_mask, _mux_flags, _div_shift, \ _div_width, _div_frac_width, _div_flags, _regs, \ - _clk_num, _enb_refcnt, _gate_flags, _clk_id) \ + _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table) \ { \ .name = _name, \ .clk_id = _clk_id, \ .parent_names = _parent_names, \ .num_parents = ARRAY_SIZE(_parent_names), \ - .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \ + .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \ _mux_flags, _div_shift, \ _div_width, _div_frac_width, \ _div_flags, _clk_num, \ _enb_refcnt, _regs, \ - _gate_flags), \ + _gate_flags, _table), \ .offset = _offset, \ .con_id = _con_id, \ .dev_id = _dev_id, \ } +#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\ + _mux_shift, _mux_width, _mux_flags, _div_shift, \ + _div_width, _div_frac_width, _div_flags, _regs, \ + _clk_num, _enb_refcnt, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ + _mux_shift, BIT(_mux_width) - 1, _mux_flags, \ + _div_shift, _div_width, _div_frac_width, _div_flags, \ + _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\ + NULL) + /** * struct clk_super_mux - super clock * diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 74faa7e3cf5..293a2885441 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -20,15 +20,23 @@ struct clk_prcmu { struct clk_hw hw; u8 cg_sel; + int is_prepared; int is_enabled; + int opp_requested; }; /* PRCMU clock operations. */ static int clk_prcmu_prepare(struct clk_hw *hw) { + int ret; struct clk_prcmu *clk = to_clk_prcmu(hw); - return prcmu_request_clock(clk->cg_sel, true); + + ret = prcmu_request_clock(clk->cg_sel, true); + if (!ret) + clk->is_prepared = 1; + + return ret;; } static void clk_prcmu_unprepare(struct clk_hw *hw) @@ -36,7 +44,15 @@ static void clk_prcmu_unprepare(struct clk_hw *hw) struct clk_prcmu *clk = to_clk_prcmu(hw); if (prcmu_request_clock(clk->cg_sel, false)) pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, - hw->init->name); + __clk_get_name(hw->clk)); + else + clk->is_prepared = 0; +} + +static int clk_prcmu_is_prepared(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return clk->is_prepared; } static int clk_prcmu_enable(struct clk_hw *hw) @@ -79,58 +95,52 @@ static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate, return prcmu_set_clock_rate(clk->cg_sel, rate); } -static int request_ape_opp100(bool enable) -{ - static int reqs; - int err = 0; - - if (enable) { - if (!reqs) - err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, - "clock", 100); - if (!err) - reqs++; - } else { - reqs--; - if (!reqs) - prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, - "clock"); - } - return err; -} - static int clk_prcmu_opp_prepare(struct clk_hw *hw) { int err; struct clk_prcmu *clk = to_clk_prcmu(hw); - err = request_ape_opp100(true); - if (err) { - pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n", - __func__, hw->init->name); - return err; + if (!clk->opp_requested) { + err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, + (char *)__clk_get_name(hw->clk), + 100); + if (err) { + pr_err("clk_prcmu: %s fail req APE OPP for %s.\n", + __func__, __clk_get_name(hw->clk)); + return err; + } + clk->opp_requested = 1; } err = prcmu_request_clock(clk->cg_sel, true); - if (err) - request_ape_opp100(false); + if (err) { + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, + (char *)__clk_get_name(hw->clk)); + clk->opp_requested = 0; + return err; + } - return err; + clk->is_prepared = 1; + return 0; } static void clk_prcmu_opp_unprepare(struct clk_hw *hw) { struct clk_prcmu *clk = to_clk_prcmu(hw); - if (prcmu_request_clock(clk->cg_sel, false)) - goto out_error; - if (request_ape_opp100(false)) - goto out_error; - return; - -out_error: - pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, - hw->init->name); + if (prcmu_request_clock(clk->cg_sel, false)) { + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + __clk_get_name(hw->clk)); + return; + } + + if (clk->opp_requested) { + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, + (char *)__clk_get_name(hw->clk)); + clk->opp_requested = 0; + } + + clk->is_prepared = 0; } static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) @@ -138,38 +148,49 @@ static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) int err; struct clk_prcmu *clk = to_clk_prcmu(hw); - err = prcmu_request_ape_opp_100_voltage(true); - if (err) { - pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n", - __func__, hw->init->name); - return err; + if (!clk->opp_requested) { + err = prcmu_request_ape_opp_100_voltage(true); + if (err) { + pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n", + __func__, __clk_get_name(hw->clk)); + return err; + } + clk->opp_requested = 1; } err = prcmu_request_clock(clk->cg_sel, true); - if (err) + if (err) { prcmu_request_ape_opp_100_voltage(false); + clk->opp_requested = 0; + return err; + } - return err; + clk->is_prepared = 1; + return 0; } static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw) { struct clk_prcmu *clk = to_clk_prcmu(hw); - if (prcmu_request_clock(clk->cg_sel, false)) - goto out_error; - if (prcmu_request_ape_opp_100_voltage(false)) - goto out_error; - return; - -out_error: - pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, - hw->init->name); + if (prcmu_request_clock(clk->cg_sel, false)) { + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + __clk_get_name(hw->clk)); + return; + } + + if (clk->opp_requested) { + prcmu_request_ape_opp_100_voltage(false); + clk->opp_requested = 0; + } + + clk->is_prepared = 0; } static struct clk_ops clk_prcmu_scalable_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -181,6 +202,7 @@ static struct clk_ops clk_prcmu_scalable_ops = { static struct clk_ops clk_prcmu_gate_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -202,6 +224,7 @@ static struct clk_ops clk_prcmu_rate_ops = { static struct clk_ops clk_prcmu_opp_gate_ops = { .prepare = clk_prcmu_opp_prepare, .unprepare = clk_prcmu_opp_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -211,6 +234,7 @@ static struct clk_ops clk_prcmu_opp_gate_ops = { static struct clk_ops clk_prcmu_opp_volt_scalable_ops = { .prepare = clk_prcmu_opp_volt_prepare, .unprepare = clk_prcmu_opp_volt_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -242,7 +266,9 @@ static struct clk *clk_reg_prcmu(const char *name, } clk->cg_sel = cg_sel; + clk->is_prepared = 1; clk->is_enabled = 1; + clk->opp_requested = 0; /* "rate" can be used for changing the initial frequency */ if (rate) prcmu_set_clock_rate(cg_sel, rate); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index e507ab7df60..9002185a0a1 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -25,7 +25,7 @@ config DW_APB_TIMER_OF config ARMADA_370_XP_TIMER bool -config SUNXI_TIMER +config SUN4I_TIMER bool config VT8500_TIMER diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 4d8283aec5b..98f220a7a92 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -16,7 +16,8 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o -obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o +obj-$(CONFIG_ARCH_MXS) += mxs_timer.o +obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c index 50c68fef944..766611d2994 100644 --- a/drivers/clocksource/bcm2835_timer.c +++ b/drivers/clocksource/bcm2835_timer.c @@ -95,23 +95,13 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id) } } -static struct of_device_id bcm2835_time_match[] __initconst = { - { .compatible = "brcm,bcm2835-system-timer" }, - {} -}; - -static void __init bcm2835_timer_init(void) +static void __init bcm2835_timer_init(struct device_node *node) { - struct device_node *node; void __iomem *base; u32 freq; int irq; struct bcm2835_timer *timer; - node = of_find_matching_node(NULL, bcm2835_time_match); - if (!node) - panic("No bcm2835 timer node"); - base = of_iomap(node, 0); if (!base) panic("Can't remap registers"); diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c index bdabdaa8d00..37f5325bec9 100644 --- a/drivers/clocksource/clksrc-of.c +++ b/drivers/clocksource/clksrc-of.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/clocksource.h> extern struct of_device_id __clksrc_of_table[]; @@ -26,10 +27,10 @@ void __init clocksource_of_init(void) { struct device_node *np; const struct of_device_id *match; - void (*init_func)(void); + clocksource_of_init_fn init_func; for_each_matching_node_and_match(np, __clksrc_of_table, &match) { init_func = match->data; - init_func(); + init_func(np); } } diff --git a/arch/arm/mach-mxs/timer.c b/drivers/clocksource/mxs_timer.c index 421020498a1..02af4204af8 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/drivers/clocksource/mxs_timer.c @@ -26,12 +26,12 @@ #include <linux/clockchips.h> #include <linux/clk.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/stmp_device.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <mach/mxs.h> -#include <mach/common.h> /* * There are 2 versions of the timrot on Freescale MXS-based SoCs. @@ -79,25 +79,25 @@ static struct clock_event_device mxs_clockevent_device; static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; -static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); +static void __iomem *mxs_timrot_base; static u32 timrot_major_version; static inline void timrot_irq_disable(void) { - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); } static inline void timrot_irq_enable(void) { - __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET); } static void timrot_irq_acknowledge(void) { - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); } static cycle_t timrotv1_get_cycles(struct clocksource *cs) @@ -242,19 +242,15 @@ static int __init mxs_clocksource_init(struct clk *timer_clk) return 0; } -void __init mxs_timer_init(void) +static void __init mxs_timer_init(struct device_node *np) { - struct device_node *np; struct clk *timer_clk; int irq; - np = of_find_compatible_node(NULL, NULL, "fsl,timrot"); - if (!np) { - pr_err("%s: failed find timrot node\n", __func__); - return; - } + mxs_timrot_base = of_iomap(np, 0); + WARN_ON(!mxs_timrot_base); - timer_clk = clk_get_sys("timrot", NULL); + timer_clk = of_clk_get(np, 0); if (IS_ERR(timer_clk)) { pr_err("%s: failed to get clk\n", __func__); return; @@ -265,11 +261,12 @@ void __init mxs_timer_init(void) /* * Initialize timers to a known state */ - mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); + stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); /* get timrot version */ timrot_major_version = __raw_readl(mxs_timrot_base + - (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : + (of_device_is_compatible(np, "fsl,imx23-timrot") ? + MX23_TIMROT_VERSION_OFFSET : MX28_TIMROT_VERSION_OFFSET)); timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; @@ -304,3 +301,4 @@ void __init mxs_timer_init(void) irq = irq_of_parse_and_map(np, 0); setup_irq(irq, &mxs_timer_irq); } +CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init); diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sun4i_timer.c index 4086b916715..d4674e78ef3 100644 --- a/drivers/clocksource/sunxi_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -22,66 +22,64 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/sunxi_timer.h> -#include <linux/clk-provider.h> -#define TIMER_CTL_REG 0x00 -#define TIMER_CTL_ENABLE (1 << 0) +#define TIMER_IRQ_EN_REG 0x00 +#define TIMER_IRQ_EN(val) (1 << val) #define TIMER_IRQ_ST_REG 0x04 -#define TIMER0_CTL_REG 0x10 -#define TIMER0_CTL_ENABLE (1 << 0) -#define TIMER0_CTL_AUTORELOAD (1 << 1) -#define TIMER0_CTL_ONESHOT (1 << 7) -#define TIMER0_INTVAL_REG 0x14 -#define TIMER0_CNTVAL_REG 0x18 +#define TIMER_CTL_REG(val) (0x10 * val + 0x10) +#define TIMER_CTL_ENABLE (1 << 0) +#define TIMER_CTL_AUTORELOAD (1 << 1) +#define TIMER_CTL_ONESHOT (1 << 7) +#define TIMER_INTVAL_REG(val) (0x10 * val + 0x14) +#define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18) #define TIMER_SCAL 16 static void __iomem *timer_base; -static void sunxi_clkevt_mode(enum clock_event_mode mode, +static void sun4i_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *clk) { - u32 u = readl(timer_base + TIMER0_CTL_REG); + u32 u = readl(timer_base + TIMER_CTL_REG(0)); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - u &= ~(TIMER0_CTL_ONESHOT); - writel(u | TIMER0_CTL_ENABLE, timer_base + TIMER0_CTL_REG); + u &= ~(TIMER_CTL_ONESHOT); + writel(u | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0)); break; case CLOCK_EVT_MODE_ONESHOT: - writel(u | TIMER0_CTL_ONESHOT, timer_base + TIMER0_CTL_REG); + writel(u | TIMER_CTL_ONESHOT, timer_base + TIMER_CTL_REG(0)); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: default: - writel(u & ~(TIMER0_CTL_ENABLE), timer_base + TIMER0_CTL_REG); + writel(u & ~(TIMER_CTL_ENABLE), timer_base + TIMER_CTL_REG(0)); break; } } -static int sunxi_clkevt_next_event(unsigned long evt, +static int sun4i_clkevt_next_event(unsigned long evt, struct clock_event_device *unused) { - u32 u = readl(timer_base + TIMER0_CTL_REG); - writel(evt, timer_base + TIMER0_CNTVAL_REG); - writel(u | TIMER0_CTL_ENABLE | TIMER0_CTL_AUTORELOAD, - timer_base + TIMER0_CTL_REG); + u32 u = readl(timer_base + TIMER_CTL_REG(0)); + writel(evt, timer_base + TIMER_CNTVAL_REG(0)); + writel(u | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD, + timer_base + TIMER_CTL_REG(0)); return 0; } -static struct clock_event_device sunxi_clockevent = { - .name = "sunxi_tick", +static struct clock_event_device sun4i_clockevent = { + .name = "sun4i_tick", .rating = 300, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sunxi_clkevt_mode, - .set_next_event = sunxi_clkevt_next_event, + .set_mode = sun4i_clkevt_mode, + .set_next_event = sun4i_clkevt_next_event, }; -static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id) +static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = (struct clock_event_device *)dev_id; @@ -91,30 +89,20 @@ static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction sunxi_timer_irq = { - .name = "sunxi_timer0", +static struct irqaction sun4i_timer_irq = { + .name = "sun4i_timer0", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = sunxi_timer_interrupt, - .dev_id = &sunxi_clockevent, -}; - -static struct of_device_id sunxi_timer_dt_ids[] = { - { .compatible = "allwinner,sunxi-timer" }, - { } + .handler = sun4i_timer_interrupt, + .dev_id = &sun4i_clockevent, }; -void __init sunxi_timer_init(void) +static void __init sun4i_timer_init(struct device_node *node) { - struct device_node *node; unsigned long rate = 0; struct clk *clk; int ret, irq; u32 val; - node = of_find_matching_node(NULL, sunxi_timer_dt_ids); - if (!node) - panic("No sunxi timer node"); - timer_base = of_iomap(node, 0); if (!timer_base) panic("Can't map registers"); @@ -123,8 +111,6 @@ void __init sunxi_timer_init(void) if (irq <= 0) panic("Can't parse IRQ"); - of_clk_init(NULL); - clk = of_clk_get(node, 0); if (IS_ERR(clk)) panic("Can't get timer clock"); @@ -132,29 +118,31 @@ void __init sunxi_timer_init(void) rate = clk_get_rate(clk); writel(rate / (TIMER_SCAL * HZ), - timer_base + TIMER0_INTVAL_REG); + timer_base + TIMER_INTVAL_REG(0)); /* set clock source to HOSC, 16 pre-division */ - val = readl(timer_base + TIMER0_CTL_REG); + val = readl(timer_base + TIMER_CTL_REG(0)); val &= ~(0x07 << 4); val &= ~(0x03 << 2); val |= (4 << 4) | (1 << 2); - writel(val, timer_base + TIMER0_CTL_REG); + writel(val, timer_base + TIMER_CTL_REG(0)); /* set mode to auto reload */ - val = readl(timer_base + TIMER0_CTL_REG); - writel(val | TIMER0_CTL_AUTORELOAD, timer_base + TIMER0_CTL_REG); + val = readl(timer_base + TIMER_CTL_REG(0)); + writel(val | TIMER_CTL_AUTORELOAD, timer_base + TIMER_CTL_REG(0)); - ret = setup_irq(irq, &sunxi_timer_irq); + ret = setup_irq(irq, &sun4i_timer_irq); if (ret) pr_warn("failed to setup irq %d\n", irq); /* Enable timer0 interrupt */ - val = readl(timer_base + TIMER_CTL_REG); - writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG); + val = readl(timer_base + TIMER_IRQ_EN_REG); + writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); - sunxi_clockevent.cpumask = cpumask_of(0); + sun4i_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL, + clockevents_config_and_register(&sun4i_clockevent, rate / TIMER_SCAL, 0x1, 0xff); } +CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer", + sun4i_timer_init); diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c index 0bde03feb09..ae877b021b5 100644 --- a/drivers/clocksource/tegra20_timer.c +++ b/drivers/clocksource/tegra20_timer.c @@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = { .dev_id = &tegra_clockevent, }; -static const struct of_device_id timer_match[] __initconst = { - { .compatible = "nvidia,tegra20-timer" }, - {} -}; - -static const struct of_device_id rtc_match[] __initconst = { - { .compatible = "nvidia,tegra20-rtc" }, - {} -}; - -static void __init tegra20_init_timer(void) +static void __init tegra20_init_timer(struct device_node *np) { - struct device_node *np; struct clk *clk; unsigned long rate; int ret; - np = of_find_matching_node(NULL, timer_match); - if (!np) { - pr_err("Failed to find timer DT node\n"); - BUG(); - } - timer_reg_base = of_iomap(np, 0); if (!timer_reg_base) { pr_err("Can't map timer registers\n"); @@ -189,7 +172,7 @@ static void __init tegra20_init_timer(void) BUG(); } - clk = clk_get_sys("timer", NULL); + clk = of_clk_get(np, 0); if (IS_ERR(clk)) { pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n"); rate = 12000000; @@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void) of_node_put(np); - np = of_find_matching_node(NULL, rtc_match); - if (!np) { - pr_err("Failed to find RTC DT node\n"); - BUG(); - } - - rtc_base = of_iomap(np, 0); - if (!rtc_base) { - pr_err("Can't map RTC registers"); - BUG(); - } - - /* - * rtc registers are used by read_persistent_clock, keep the rtc clock - * enabled - */ - clk = clk_get_sys("rtc-tegra", NULL); - if (IS_ERR(clk)) - pr_warn("Unable to get rtc-tegra clock\n"); - else - clk_prepare_enable(clk); - - of_node_put(np); - switch (rate) { case 12000000: timer_writel(0x000b, TIMERUS_USEC_CFG); @@ -259,12 +218,34 @@ static void __init tegra20_init_timer(void) tegra_clockevent.irq = tegra_timer_irq.irq; clockevents_config_and_register(&tegra_clockevent, 1000000, 0x1, 0x1fffffff); -#ifdef CONFIG_HAVE_ARM_TWD - twd_local_timer_of_register(); -#endif +} +CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer); + +static void __init tegra20_init_rtc(struct device_node *np) +{ + struct clk *clk; + + rtc_base = of_iomap(np, 0); + if (!rtc_base) { + pr_err("Can't map RTC registers"); + BUG(); + } + + /* + * rtc registers are used by read_persistent_clock, keep the rtc clock + * enabled + */ + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + pr_warn("Unable to get rtc-tegra clock\n"); + else + clk_prepare_enable(clk); + + of_node_put(np); + register_persistent_clock(NULL, tegra_read_persistent_clock); } -CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer); +CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc); #ifdef CONFIG_PM static u32 usec_config; diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c index 8efc86b5b5d..64f553f04fa 100644 --- a/drivers/clocksource/vt8500_timer.c +++ b/drivers/clocksource/vt8500_timer.c @@ -129,22 +129,10 @@ static struct irqaction irq = { .dev_id = &clockevent, }; -static struct of_device_id vt8500_timer_ids[] = { - { .compatible = "via,vt8500-timer" }, - { } -}; - -static void __init vt8500_timer_init(void) +static void __init vt8500_timer_init(struct device_node *np) { - struct device_node *np; int timer_irq; - np = of_find_matching_node(NULL, vt8500_timer_ids); - if (!np) { - pr_err("%s: Timer description missing from Device Tree\n", - __func__); - return; - } regbase = of_iomap(np, 0); if (!regbase) { pr_err("%s: Missing iobase description in Device Tree\n", @@ -177,4 +165,4 @@ static void __init vt8500_timer_init(void) 4, 0xf0000000); } -CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init) +CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init); diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c index 52a4d4286eb..c798585a3fe 100644 --- a/drivers/gpio/gpio-msm-v1.c +++ b/drivers/gpio/gpio-msm-v1.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -19,9 +19,10 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/module.h> -#include <mach/cpu.h> +#include <linux/device.h> +#include <linux/platform_device.h> + #include <mach/msm_gpiomux.h> -#include <mach/msm_iomap.h> /* see 80-VA736-2 Rev C pp 695-751 ** @@ -34,10 +35,10 @@ ** macros. */ -#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off)) -#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off)) -#define MSM_GPIO1_SHADOW_REG(off) (MSM_GPIO1_BASE + 0x800 + (off)) -#define MSM_GPIO2_SHADOW_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off)) +#define MSM_GPIO1_REG(off) (off) +#define MSM_GPIO2_REG(off) (off) +#define MSM_GPIO1_SHADOW_REG(off) (off) +#define MSM_GPIO2_SHADOW_REG(off) (off) /* * MSM7X00 registers @@ -276,16 +277,14 @@ #define MSM_GPIO_BANK(soc, bank, first, last) \ { \ - .regs = { \ - .out = soc##_GPIO_OUT_##bank, \ - .in = soc##_GPIO_IN_##bank, \ - .int_status = soc##_GPIO_INT_STATUS_##bank, \ - .int_clear = soc##_GPIO_INT_CLEAR_##bank, \ - .int_en = soc##_GPIO_INT_EN_##bank, \ - .int_edge = soc##_GPIO_INT_EDGE_##bank, \ - .int_pos = soc##_GPIO_INT_POS_##bank, \ - .oe = soc##_GPIO_OE_##bank, \ - }, \ + .regs[MSM_GPIO_OUT] = soc##_GPIO_OUT_##bank, \ + .regs[MSM_GPIO_IN] = soc##_GPIO_IN_##bank, \ + .regs[MSM_GPIO_INT_STATUS] = soc##_GPIO_INT_STATUS_##bank, \ + .regs[MSM_GPIO_INT_CLEAR] = soc##_GPIO_INT_CLEAR_##bank, \ + .regs[MSM_GPIO_INT_EN] = soc##_GPIO_INT_EN_##bank, \ + .regs[MSM_GPIO_INT_EDGE] = soc##_GPIO_INT_EDGE_##bank, \ + .regs[MSM_GPIO_INT_POS] = soc##_GPIO_INT_POS_##bank, \ + .regs[MSM_GPIO_OE] = soc##_GPIO_OE_##bank, \ .chip = { \ .base = (first), \ .ngpio = (last) - (first) + 1, \ @@ -301,39 +300,57 @@ #define MSM_GPIO_BROKEN_INT_CLEAR 1 -struct msm_gpio_regs { - void __iomem *out; - void __iomem *in; - void __iomem *int_status; - void __iomem *int_clear; - void __iomem *int_en; - void __iomem *int_edge; - void __iomem *int_pos; - void __iomem *oe; +enum msm_gpio_reg { + MSM_GPIO_IN, + MSM_GPIO_OUT, + MSM_GPIO_INT_STATUS, + MSM_GPIO_INT_CLEAR, + MSM_GPIO_INT_EN, + MSM_GPIO_INT_EDGE, + MSM_GPIO_INT_POS, + MSM_GPIO_OE, + MSM_GPIO_REG_NR }; struct msm_gpio_chip { spinlock_t lock; struct gpio_chip chip; - struct msm_gpio_regs regs; + unsigned long regs[MSM_GPIO_REG_NR]; #if MSM_GPIO_BROKEN_INT_CLEAR unsigned int_status_copy; #endif unsigned int both_edge_detect; unsigned int int_enable[2]; /* 0: awake, 1: sleep */ + void __iomem *base; +}; + +struct msm_gpio_initdata { + struct msm_gpio_chip *chips; + int count; }; +static void msm_gpio_writel(struct msm_gpio_chip *chip, u32 val, + enum msm_gpio_reg reg) +{ + writel(val, chip->base + chip->regs[reg]); +} + +static u32 msm_gpio_readl(struct msm_gpio_chip *chip, enum msm_gpio_reg reg) +{ + return readl(chip->base + chip->regs[reg]); +} + static int msm_gpio_write(struct msm_gpio_chip *msm_chip, unsigned offset, unsigned on) { unsigned mask = BIT(offset); unsigned val; - val = readl(msm_chip->regs.out); + val = msm_gpio_readl(msm_chip, MSM_GPIO_OUT); if (on) - writel(val | mask, msm_chip->regs.out); + msm_gpio_writel(msm_chip, val | mask, MSM_GPIO_OUT); else - writel(val & ~mask, msm_chip->regs.out); + msm_gpio_writel(msm_chip, val & ~mask, MSM_GPIO_OUT); return 0; } @@ -342,13 +359,13 @@ static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip) int loop_limit = 100; unsigned pol, val, val2, intstat; do { - val = readl(msm_chip->regs.in); - pol = readl(msm_chip->regs.int_pos); + val = msm_gpio_readl(msm_chip, MSM_GPIO_IN); + pol = msm_gpio_readl(msm_chip, MSM_GPIO_INT_POS); pol = (pol & ~msm_chip->both_edge_detect) | (~val & msm_chip->both_edge_detect); - writel(pol, msm_chip->regs.int_pos); - intstat = readl(msm_chip->regs.int_status); - val2 = readl(msm_chip->regs.in); + msm_gpio_writel(msm_chip, pol, MSM_GPIO_INT_POS); + intstat = msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS); + val2 = msm_gpio_readl(msm_chip, MSM_GPIO_IN); if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0) return; } while (loop_limit-- > 0); @@ -365,10 +382,11 @@ static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip, /* Save interrupts that already triggered before we loose them. */ /* Any interrupt that triggers between the read of int_status */ /* and the write to int_clear will still be lost though. */ - msm_chip->int_status_copy |= readl(msm_chip->regs.int_status); + msm_chip->int_status_copy |= + msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS); msm_chip->int_status_copy &= ~bit; #endif - writel(bit, msm_chip->regs.int_clear); + msm_gpio_writel(msm_chip, bit, MSM_GPIO_INT_CLEAR); msm_gpio_update_both_edge_detect(msm_chip); return 0; } @@ -377,10 +395,12 @@ static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { struct msm_gpio_chip *msm_chip; unsigned long irq_flags; + u32 val; msm_chip = container_of(chip, struct msm_gpio_chip, chip); spin_lock_irqsave(&msm_chip->lock, irq_flags); - writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe); + val = msm_gpio_readl(msm_chip, MSM_GPIO_OE) & ~BIT(offset); + msm_gpio_writel(msm_chip, val, MSM_GPIO_OE); spin_unlock_irqrestore(&msm_chip->lock, irq_flags); return 0; } @@ -390,11 +410,13 @@ msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { struct msm_gpio_chip *msm_chip; unsigned long irq_flags; + u32 val; msm_chip = container_of(chip, struct msm_gpio_chip, chip); spin_lock_irqsave(&msm_chip->lock, irq_flags); msm_gpio_write(msm_chip, offset, value); - writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe); + val = msm_gpio_readl(msm_chip, MSM_GPIO_OE) | BIT(offset); + msm_gpio_writel(msm_chip, val, MSM_GPIO_OE); spin_unlock_irqrestore(&msm_chip->lock, irq_flags); return 0; } @@ -404,7 +426,7 @@ static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) struct msm_gpio_chip *msm_chip; msm_chip = container_of(chip, struct msm_gpio_chip, chip); - return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0; + return (msm_gpio_readl(msm_chip, MSM_GPIO_IN) & (1U << offset)) ? 1 : 0; } static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) @@ -450,6 +472,11 @@ static struct msm_gpio_chip msm_gpio_chips_msm7x01[] = { MSM_GPIO_BANK(MSM7X00, 5, 107, 121), }; +static struct msm_gpio_initdata msm_gpio_7x01_init = { + .chips = msm_gpio_chips_msm7x01, + .count = ARRAY_SIZE(msm_gpio_chips_msm7x01), +}; + static struct msm_gpio_chip msm_gpio_chips_msm7x30[] = { MSM_GPIO_BANK(MSM7X30, 0, 0, 15), MSM_GPIO_BANK(MSM7X30, 1, 16, 43), @@ -461,6 +488,11 @@ static struct msm_gpio_chip msm_gpio_chips_msm7x30[] = { MSM_GPIO_BANK(MSM7X30, 7, 151, 181), }; +static struct msm_gpio_initdata msm_gpio_7x30_init = { + .chips = msm_gpio_chips_msm7x30, + .count = ARRAY_SIZE(msm_gpio_chips_msm7x30), +}; + static struct msm_gpio_chip msm_gpio_chips_qsd8x50[] = { MSM_GPIO_BANK(QSD8X50, 0, 0, 15), MSM_GPIO_BANK(QSD8X50, 1, 16, 42), @@ -472,6 +504,11 @@ static struct msm_gpio_chip msm_gpio_chips_qsd8x50[] = { MSM_GPIO_BANK(QSD8X50, 7, 153, 164), }; +static struct msm_gpio_initdata msm_gpio_8x50_init = { + .chips = msm_gpio_chips_qsd8x50, + .count = ARRAY_SIZE(msm_gpio_chips_qsd8x50), +}; + static void msm_gpio_irq_ack(struct irq_data *d) { unsigned long irq_flags; @@ -490,10 +527,10 @@ static void msm_gpio_irq_mask(struct irq_data *d) spin_lock_irqsave(&msm_chip->lock, irq_flags); /* level triggered interrupts are also latched */ - if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) + if (!(msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE) & BIT(offset))) msm_gpio_clear_detect_status(msm_chip, offset); msm_chip->int_enable[0] &= ~BIT(offset); - writel(msm_chip->int_enable[0], msm_chip->regs.int_en); + msm_gpio_writel(msm_chip, msm_chip->int_enable[0], MSM_GPIO_INT_EN); spin_unlock_irqrestore(&msm_chip->lock, irq_flags); } @@ -505,10 +542,10 @@ static void msm_gpio_irq_unmask(struct irq_data *d) spin_lock_irqsave(&msm_chip->lock, irq_flags); /* level triggered interrupts are also latched */ - if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) + if (!(msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE) & BIT(offset))) msm_gpio_clear_detect_status(msm_chip, offset); msm_chip->int_enable[0] |= BIT(offset); - writel(msm_chip->int_enable[0], msm_chip->regs.int_en); + msm_gpio_writel(msm_chip, msm_chip->int_enable[0], MSM_GPIO_INT_EN); spin_unlock_irqrestore(&msm_chip->lock, irq_flags); } @@ -537,12 +574,12 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) unsigned val, mask = BIT(offset); spin_lock_irqsave(&msm_chip->lock, irq_flags); - val = readl(msm_chip->regs.int_edge); + val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE); if (flow_type & IRQ_TYPE_EDGE_BOTH) { - writel(val | mask, msm_chip->regs.int_edge); + msm_gpio_writel(msm_chip, val | mask, MSM_GPIO_INT_EDGE); __irq_set_handler_locked(d->irq, handle_edge_irq); } else { - writel(val & ~mask, msm_chip->regs.int_edge); + msm_gpio_writel(msm_chip, val & ~mask, MSM_GPIO_INT_EDGE); __irq_set_handler_locked(d->irq, handle_level_irq); } if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { @@ -550,11 +587,12 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) msm_gpio_update_both_edge_detect(msm_chip); } else { msm_chip->both_edge_detect &= ~mask; - val = readl(msm_chip->regs.int_pos); + val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_POS); if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - writel(val | mask, msm_chip->regs.int_pos); + val |= mask; else - writel(val & ~mask, msm_chip->regs.int_pos); + val &= ~mask; + msm_gpio_writel(msm_chip, val, MSM_GPIO_INT_POS); } spin_unlock_irqrestore(&msm_chip->lock, irq_flags); return 0; @@ -567,7 +605,7 @@ static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) for (i = 0; i < msm_gpio_count; i++) { struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i]; - val = readl(msm_chip->regs.int_status); + val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS); val &= msm_chip->int_enable[0]; while (val) { mask = val & -val; @@ -592,22 +630,36 @@ static struct irq_chip msm_gpio_irq_chip = { .irq_set_type = msm_gpio_irq_set_type, }; -static int __init msm_init_gpio(void) +static int __devinit gpio_msm_v1_probe(struct platform_device *pdev) { int i, j = 0; - - if (cpu_is_msm7x01()) { - msm_gpio_chips = msm_gpio_chips_msm7x01; - msm_gpio_count = ARRAY_SIZE(msm_gpio_chips_msm7x01); - } else if (cpu_is_msm7x30()) { - msm_gpio_chips = msm_gpio_chips_msm7x30; - msm_gpio_count = ARRAY_SIZE(msm_gpio_chips_msm7x30); - } else if (cpu_is_qsd8x50()) { - msm_gpio_chips = msm_gpio_chips_qsd8x50; - msm_gpio_count = ARRAY_SIZE(msm_gpio_chips_qsd8x50); - } else { - return 0; - } + const struct platform_device_id *dev_id = platform_get_device_id(pdev); + struct msm_gpio_initdata *data; + int irq1, irq2; + struct resource *res; + void __iomem *base1, __iomem *base2; + + data = (struct msm_gpio_initdata *)dev_id->driver_data; + msm_gpio_chips = data->chips; + msm_gpio_count = data->count; + + irq1 = platform_get_irq(pdev, 0); + if (irq1 < 0) + return irq1; + + irq2 = platform_get_irq(pdev, 1); + if (irq2 < 0) + return irq2; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base1 = devm_request_and_ioremap(&pdev->dev, res); + if (!base1) + return -EADDRNOTAVAIL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + base2 = devm_request_and_ioremap(&pdev->dev, res); + if (!base2) + return -EADDRNOTAVAIL; for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) { if (i - FIRST_GPIO_IRQ >= @@ -621,16 +673,42 @@ static int __init msm_init_gpio(void) } for (i = 0; i < msm_gpio_count; i++) { + if (i == 1) + msm_gpio_chips[i].base = base2; + else + msm_gpio_chips[i].base = base1; spin_lock_init(&msm_gpio_chips[i].lock); - writel(0, msm_gpio_chips[i].regs.int_en); + msm_gpio_writel(&msm_gpio_chips[i], 0, MSM_GPIO_INT_EN); gpiochip_add(&msm_gpio_chips[i].chip); } - irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); - irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); - irq_set_irq_wake(INT_GPIO_GROUP1, 1); - irq_set_irq_wake(INT_GPIO_GROUP2, 2); + irq_set_chained_handler(irq1, msm_gpio_irq_handler); + irq_set_chained_handler(irq2, msm_gpio_irq_handler); + irq_set_irq_wake(irq1, 1); + irq_set_irq_wake(irq2, 2); return 0; } -postcore_initcall(msm_init_gpio); +static struct platform_device_id gpio_msm_v1_device_ids[] = { + { "gpio-msm-7201", (unsigned long)&msm_gpio_7x01_init }, + { "gpio-msm-7x30", (unsigned long)&msm_gpio_7x30_init }, + { "gpio-msm-8x50", (unsigned long)&msm_gpio_8x50_init }, + { } +}; +MODULE_DEVICE_TABLE(platform, gpio_msm_v1_device_ids); + +static struct platform_driver gpio_msm_v1_driver = { + .driver = { + .name = "gpio-msm-v1", + .owner = THIS_MODULE, + }, + .probe = gpio_msm_v1_probe, + .id_table = gpio_msm_v1_device_ids, +}; + +static int __init gpio_msm_v1_init(void) +{ + return platform_driver_register(&gpio_msm_v1_driver); +} +postcore_initcall(gpio_msm_v1_init); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c index 55a7e7769af..dd2eddeb1e0 100644 --- a/drivers/gpio/gpio-msm-v2.c +++ b/drivers/gpio/gpio-msm-v2.c @@ -23,13 +23,12 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spinlock.h> -#include <asm/mach/irq.h> - #include <mach/msm_gpiomux.h> #include <mach/msm_iomap.h> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 7877335c4cc..7176743915d 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -32,7 +33,6 @@ #include <linux/of_device.h> #include <linux/module.h> #include <asm-generic/bug.h> -#include <asm/mach/irq.h> enum mxc_gpio_hwtype { IMX1_GPIO, /* runs on i.mx1 */ diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 159f5c57eb4..a612ea1c53c 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -25,11 +25,10 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> -#include <asm/mach/irq.h> - #define OFF_MODE 1 static LIST_HEAD(omap_gpio_list); diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index b820869ca93..29763361d13 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/ioport.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/bitops.h> #include <linux/workqueue.h> #include <linux/gpio.h> @@ -23,7 +24,6 @@ #include <linux/amba/pl061.h> #include <linux/slab.h> #include <linux/pm.h> -#include <asm/mach/irq.h> #define GPIODIR 0x400 #define GPIOIS 0x404 diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 9cc108d2b77..7523b6d108d 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> @@ -26,8 +27,6 @@ #include <linux/syscore_ops.h> #include <linux/slab.h> -#include <asm/mach/irq.h> - #include <mach/irqs.h> /* diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 414ad912232..8e215554888 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -27,11 +27,10 @@ #include <linux/platform_device.h> #include <linux/module.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/pinctrl/consumer.h> #include <linux/pm.h> -#include <asm/mach/irq.h> - #define GPIO_BANK(x) ((x) >> 5) #define GPIO_PORT(x) (((x) >> 3) & 0x3) #define GPIO_BIT(x) ((x) & 0x7) diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 98e3b87bdf1..d5e119ca942 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,9 +2,10 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_MXS) += irq-mxs.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o -obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o +obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o obj-$(CONFIG_ARM_GIC) += irq-gic.o obj-$(CONFIG_ARM_VIC) += irq-vic.o diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c index 04d86a9803f..6a520135150 100644 --- a/drivers/irqchip/exynos-combiner.c +++ b/drivers/irqchip/exynos-combiner.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <asm/mach/irq.h> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index a32e0d5aa45..47aea33a078 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -28,6 +28,7 @@ #include <linux/module.h> #include <linux/list.h> #include <linux/smp.h> +#include <linux/cpu.h> #include <linux/cpu_pm.h> #include <linux/cpumask.h> #include <linux/io.h> @@ -38,12 +39,12 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/slab.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irqchip/arm-gic.h> #include <asm/irq.h> #include <asm/exception.h> #include <asm/smp_plat.h> -#include <asm/mach/irq.h> #include "irqchip.h" @@ -127,7 +128,7 @@ static inline void gic_set_base_accessor(struct gic_chip_data *data, #else #define gic_data_dist_base(d) ((d)->dist_base.common_base) #define gic_data_cpu_base(d) ((d)->cpu_base.common_base) -#define gic_set_base_accessor(d,f) +#define gic_set_base_accessor(d, f) #endif static inline void __iomem *gic_dist_base(struct irq_data *d) @@ -323,7 +324,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) cascade_irq = irq_find_mapping(chip_data->domain, gic_irq); if (unlikely(gic_irq < 32 || gic_irq > 1020)) - do_bad_IRQ(cascade_irq, desc); + handle_bad_irq(cascade_irq, desc); else generic_handle_irq(cascade_irq); @@ -699,6 +700,25 @@ static int gic_irq_domain_xlate(struct irq_domain *d, return 0; } +#ifdef CONFIG_SMP +static int __cpuinit gic_secondary_init(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + if (action == CPU_STARTING) + gic_cpu_init(&gic_data[0]); + return NOTIFY_OK; +} + +/* + * Notifier for enabling the GIC CPU interface. Set an arbitrarily high + * priority because the GIC needs to be up before the ARM generic timers. + */ +static struct notifier_block __cpuinitdata gic_cpu_notifier = { + .notifier_call = gic_secondary_init, + .priority = 100, +}; +#endif + const struct irq_domain_ops gic_irq_domain_ops = { .map = gic_irq_domain_map, .xlate = gic_irq_domain_xlate, @@ -789,6 +809,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, #ifdef CONFIG_SMP set_smp_cross_call(gic_raise_softirq); + register_cpu_notifier(&gic_cpu_notifier); #endif set_handle_irq(gic_handle_irq); @@ -799,15 +820,8 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, gic_pm_init(gic); } -void __cpuinit gic_secondary_init(unsigned int gic_nr) -{ - BUG_ON(gic_nr >= MAX_GIC_NR); - - gic_cpu_init(&gic_data[gic_nr]); -} - #ifdef CONFIG_OF -static int gic_cnt __initdata = 0; +static int gic_cnt __initdata; int __init gic_of_init(struct device_node *node, struct device_node *parent) { diff --git a/arch/arm/mach-mxs/icoll.c b/drivers/irqchip/irq-mxs.c index e26eeba4659..29889bbdcc6 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/drivers/irqchip/irq-mxs.c @@ -22,10 +22,12 @@ #include <linux/irqdomain.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/stmp_device.h> #include <asm/exception.h> -#include <mach/mxs.h> -#include <mach/common.h> + +#include "irqchip.h" #define HW_ICOLL_VECTOR 0x0000 #define HW_ICOLL_LEVELACK 0x0010 @@ -38,7 +40,7 @@ #define ICOLL_NUM_IRQS 128 -static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); +static void __iomem *icoll_base; static struct irq_domain *icoll_domain; static void icoll_ack_irq(struct irq_data *d) @@ -103,23 +105,17 @@ static struct irq_domain_ops icoll_irq_domain_ops = { static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { + icoll_base = of_iomap(np, 0); + WARN_ON(!icoll_base); + /* * Interrupt Collector reset, which initializes the priority * for each irq to level 0. */ - mxs_reset_block(icoll_base + HW_ICOLL_CTRL); + stmp_reset_block(icoll_base + HW_ICOLL_CTRL); icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS, &icoll_irq_domain_ops, NULL); WARN_ON(!icoll_domain); } - -static const struct of_device_id icoll_of_match[] __initconst = { - {.compatible = "fsl,icoll", .data = icoll_of_init}, - { /* sentinel */ } -}; - -void __init icoll_init_irq(void) -{ - of_irq_init(icoll_of_match); -} +IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init); diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c new file mode 100644 index 00000000000..b66d4ae0689 --- /dev/null +++ b/drivers/irqchip/irq-sun4i.c @@ -0,0 +1,149 @@ +/* + * Allwinner A1X SoCs IRQ chip driver. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Benn Huang <benn@allwinnertech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <asm/exception.h> +#include <asm/mach/irq.h> + +#include "irqchip.h" + +#define SUN4I_IRQ_VECTOR_REG 0x00 +#define SUN4I_IRQ_PROTECTION_REG 0x08 +#define SUN4I_IRQ_NMI_CTRL_REG 0x0c +#define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) +#define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) +#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) +#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x) + +static void __iomem *sun4i_irq_base; +static struct irq_domain *sun4i_irq_domain; + +static asmlinkage void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs); + +void sun4i_irq_ack(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg)); + writel(val | (1 << irq_off), + sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg)); +} + +static void sun4i_irq_mask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); + writel(val & ~(1 << irq_off), + sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); +} + +static void sun4i_irq_unmask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); + writel(val | (1 << irq_off), + sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); +} + +static struct irq_chip sun4i_irq_chip = { + .name = "sun4i_irq", + .irq_ack = sun4i_irq_ack, + .irq_mask = sun4i_irq_mask, + .irq_unmask = sun4i_irq_unmask, +}; + +static int sun4i_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &sun4i_irq_chip, + handle_level_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops sun4i_irq_ops = { + .map = sun4i_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int __init sun4i_of_init(struct device_node *node, + struct device_node *parent) +{ + sun4i_irq_base = of_iomap(node, 0); + if (!sun4i_irq_base) + panic("%s: unable to map IC registers\n", + node->full_name); + + /* Disable all interrupts */ + writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(0)); + writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1)); + writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2)); + + /* Mask all the interrupts */ + writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0)); + writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1)); + writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2)); + + /* Clear all the pending interrupts */ + writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)); + writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(1)); + writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(2)); + + /* Enable protection mode */ + writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG); + + /* Configure the external interrupt source type */ + writel(0x00, sun4i_irq_base + SUN4I_IRQ_NMI_CTRL_REG); + + sun4i_irq_domain = irq_domain_add_linear(node, 3 * 32, + &sun4i_irq_ops, NULL); + if (!sun4i_irq_domain) + panic("%s: unable to create IRQ domain\n", node->full_name); + + set_handle_irq(sun4i_handle_irq); + + return 0; +} +IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-ic", sun4i_of_init); + +static asmlinkage void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs) +{ + u32 irq, hwirq; + + hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; + while (hwirq != 0) { + irq = irq_find_mapping(sun4i_irq_domain, hwirq); + handle_IRQ(irq, regs); + hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; + } +} diff --git a/drivers/irqchip/irq-sunxi.c b/drivers/irqchip/irq-sunxi.c deleted file mode 100644 index 10974fa4265..00000000000 --- a/drivers/irqchip/irq-sunxi.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Allwinner A1X SoCs IRQ chip driver. - * - * Copyright (C) 2012 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * Based on code from - * Allwinner Technology Co., Ltd. <www.allwinnertech.com> - * Benn Huang <benn@allwinnertech.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <linux/irqchip/sunxi.h> - -#define SUNXI_IRQ_VECTOR_REG 0x00 -#define SUNXI_IRQ_PROTECTION_REG 0x08 -#define SUNXI_IRQ_NMI_CTRL_REG 0x0c -#define SUNXI_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) -#define SUNXI_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) -#define SUNXI_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) -#define SUNXI_IRQ_MASK_REG(x) (0x50 + 0x4 * x) - -static void __iomem *sunxi_irq_base; -static struct irq_domain *sunxi_irq_domain; - -void sunxi_irq_ack(struct irq_data *irqd) -{ - unsigned int irq = irqd_to_hwirq(irqd); - unsigned int irq_off = irq % 32; - int reg = irq / 32; - u32 val; - - val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); - writel(val | (1 << irq_off), - sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); -} - -static void sunxi_irq_mask(struct irq_data *irqd) -{ - unsigned int irq = irqd_to_hwirq(irqd); - unsigned int irq_off = irq % 32; - int reg = irq / 32; - u32 val; - - val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); - writel(val & ~(1 << irq_off), - sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); -} - -static void sunxi_irq_unmask(struct irq_data *irqd) -{ - unsigned int irq = irqd_to_hwirq(irqd); - unsigned int irq_off = irq % 32; - int reg = irq / 32; - u32 val; - - val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); - writel(val | (1 << irq_off), - sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); -} - -static struct irq_chip sunxi_irq_chip = { - .name = "sunxi_irq", - .irq_ack = sunxi_irq_ack, - .irq_mask = sunxi_irq_mask, - .irq_unmask = sunxi_irq_unmask, -}; - -static int sunxi_irq_map(struct irq_domain *d, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &sunxi_irq_chip, - handle_level_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops sunxi_irq_ops = { - .map = sunxi_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -static int __init sunxi_of_init(struct device_node *node, - struct device_node *parent) -{ - sunxi_irq_base = of_iomap(node, 0); - if (!sunxi_irq_base) - panic("%s: unable to map IC registers\n", - node->full_name); - - /* Disable all interrupts */ - writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0)); - writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1)); - writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2)); - - /* Mask all the interrupts */ - writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0)); - writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1)); - writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2)); - - /* Clear all the pending interrupts */ - writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0)); - writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1)); - writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2)); - - /* Enable protection mode */ - writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG); - - /* Configure the external interrupt source type */ - writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG); - - sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32, - &sunxi_irq_ops, NULL); - if (!sunxi_irq_domain) - panic("%s: unable to create IRQ domain\n", node->full_name); - - return 0; -} - -static struct of_device_id sunxi_irq_dt_ids[] __initconst = { - { .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init }, - { } -}; - -void __init sunxi_init_irq(void) -{ - of_irq_init(sunxi_irq_dt_ids); -} - -asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs) -{ - u32 irq, hwirq; - - hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; - while (hwirq != 0) { - irq = irq_find_mapping(sunxi_irq_domain, hwirq); - handle_IRQ(irq, regs); - hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; - } -} diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c index 3cf97aaebe4..884d11c7355 100644 --- a/drivers/irqchip/irq-vic.c +++ b/drivers/irqchip/irq-vic.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> @@ -33,7 +34,7 @@ #include <linux/irqchip/arm-vic.h> #include <asm/exception.h> -#include <asm/mach/irq.h> +#include <asm/irq.h> #include "irqchip.h" diff --git a/drivers/memory/tegra30-mc.c b/drivers/memory/tegra30-mc.c index 0b975986777..f4ae074badc 100644 --- a/drivers/memory/tegra30-mc.c +++ b/drivers/memory/tegra30-mc.c @@ -268,6 +268,7 @@ static const u32 tegra30_mc_ctx[] = { MC_INTMASK, }; +#ifdef CONFIG_PM static int tegra30_mc_suspend(struct device *dev) { int i; @@ -291,6 +292,7 @@ static int tegra30_mc_resume(struct device *dev) mc_readl(mc, MC_TIMING_CONTROL); return 0; } +#endif static UNIVERSAL_DEV_PM_OPS(tegra30_mc_pm, tegra30_mc_suspend, diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 7c0af0e8004..0ee4a57fe6b 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -43,7 +43,6 @@ #include <asm/sizes.h> #include <linux/platform_data/mmc-msm_sdcc.h> -#include <mach/msm_iomap.h> #include <mach/dma.h> #include <mach/clk.h> diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 63fb265e0da..8d6794cdf89 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -25,14 +25,93 @@ #include <mach/dma.h> -#include <mach/regs-sdi.h> - #include <linux/platform_data/mmc-s3cmci.h> #include "s3cmci.h" #define DRIVER_NAME "s3c-mci" +#define S3C2410_SDICON (0x00) +#define S3C2410_SDIPRE (0x04) +#define S3C2410_SDICMDARG (0x08) +#define S3C2410_SDICMDCON (0x0C) +#define S3C2410_SDICMDSTAT (0x10) +#define S3C2410_SDIRSP0 (0x14) +#define S3C2410_SDIRSP1 (0x18) +#define S3C2410_SDIRSP2 (0x1C) +#define S3C2410_SDIRSP3 (0x20) +#define S3C2410_SDITIMER (0x24) +#define S3C2410_SDIBSIZE (0x28) +#define S3C2410_SDIDCON (0x2C) +#define S3C2410_SDIDCNT (0x30) +#define S3C2410_SDIDSTA (0x34) +#define S3C2410_SDIFSTA (0x38) + +#define S3C2410_SDIDATA (0x3C) +#define S3C2410_SDIIMSK (0x40) + +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1 << 8) +#define S3C2410_SDICON_SDIOIRQ (1 << 3) +#define S3C2410_SDICON_FIFORESET (1 << 1) +#define S3C2410_SDICON_CLOCKTYPE (1 << 0) + +#define S3C2410_SDICMDCON_LONGRSP (1 << 10) +#define S3C2410_SDICMDCON_WAITRSP (1 << 9) +#define S3C2410_SDICMDCON_CMDSTART (1 << 8) +#define S3C2410_SDICMDCON_SENDERHOST (1 << 6) +#define S3C2410_SDICMDCON_INDEX (0x3f) + +#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12) +#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11) +#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10) +#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9) + +#define S3C2440_SDIDCON_DS_WORD (2 << 22) +#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20) +#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19) +#define S3C2410_SDIDCON_BLOCKMODE (1 << 17) +#define S3C2410_SDIDCON_WIDEBUS (1 << 16) +#define S3C2410_SDIDCON_DMAEN (1 << 15) +#define S3C2410_SDIDCON_STOP (1 << 14) +#define S3C2440_SDIDCON_DATSTART (1 << 14) + +#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12) +#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12) + +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) + +#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9) +#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8) +#define S3C2410_SDIDSTA_CRCFAIL (1 << 7) +#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6) +#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5) +#define S3C2410_SDIDSTA_XFERFINISH (1 << 4) +#define S3C2410_SDIDSTA_TXDATAON (1 << 1) +#define S3C2410_SDIDSTA_RXDATAON (1 << 0) + +#define S3C2440_SDIFSTA_FIFORESET (1 << 16) +#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14) +#define S3C2410_SDIFSTA_TFDET (1 << 13) +#define S3C2410_SDIFSTA_RFDET (1 << 12) +#define S3C2410_SDIFSTA_COUNTMASK (0x7f) + +#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17) +#define S3C2410_SDIIMSK_CMDSENT (1 << 16) +#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15) +#define S3C2410_SDIIMSK_RESPONSEND (1 << 14) +#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12) +#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11) +#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10) +#define S3C2410_SDIIMSK_DATACRC (1 << 9) +#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8) +#define S3C2410_SDIIMSK_DATAFINISH (1 << 7) +#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4) +#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2) +#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0) + enum dbg_channels { dbg_err = (1 << 0), dbg_debug = (1 << 1), diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index efb7f10e902..b141a28473b 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/pinctrl/machine.h> @@ -27,8 +28,6 @@ /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 538b9ddaadf..7265e551ddd 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -23,13 +23,12 @@ #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_irq.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/err.h> -#include <asm/mach/irq.h> - #include "pinctrl-samsung.h" #include "pinctrl-exynos.h" diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 36d20293de5..93eba9715e6 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/slab.h> #include <linux/of_device.h> #include <linux/of_address.h> @@ -33,7 +34,6 @@ /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> #include <linux/platform_data/pinctrl-nomadik.h> -#include <asm/mach/irq.h> #include "pinctrl-nomadik.h" #include "core.h" diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index d02498b30c6..ab26b4b669d 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/consumer.h> @@ -25,7 +26,6 @@ #include <linux/bitops.h> #include <linux/gpio.h> #include <linux/of_gpio.h> -#include <asm/mach/irq.h> #define DRIVER_NAME "pinmux-sirf" diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c index 295b349a05c..a4908ecd74f 100644 --- a/drivers/pinctrl/spear/pinctrl-plgpio.c +++ b/drivers/pinctrl/spear/pinctrl-plgpio.c @@ -15,12 +15,12 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/module.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/spinlock.h> -#include <asm/mach/irq.h> #define MAX_GPIO_PER_REG 32 #define PIN_OFFSET(pin) (pin % MAX_GPIO_PER_REG) diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c index 98f0d3c3073..67d26128bc8 100644 --- a/drivers/rtc/rtc-stmp3xxx.c +++ b/drivers/rtc/rtc-stmp3xxx.c @@ -30,8 +30,6 @@ #include <linux/stmp_device.h> #include <linux/stmp3xxx_rtc_wdt.h> -#include <mach/common.h> - #define STMP3XXX_RTC_CTRL 0x0 #define STMP3XXX_RTC_CTRL_SET 0x4 #define STMP3XXX_RTC_CTRL_CLR 0x8 @@ -271,7 +269,7 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc_data); - mxs_reset_block(rtc_data->io); + stmp_reset_block(rtc_data->io); writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE, @@ -319,7 +317,7 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev) { struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(dev); - mxs_reset_block(rtc_data->io); + stmp_reset_block(rtc_data->io); writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE, diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 55a459b6190..0eb5b4d759e 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -36,9 +36,6 @@ #include <linux/delay.h> #include <linux/input.h> -#include <mach/mxs.h> -#include <mach/common.h> - #include <linux/iio/iio.h> #include <linux/iio/buffer.h> #include <linux/iio/trigger.h> diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c index 366f259e375..6efe4e1b499 100644 --- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c +++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c @@ -25,8 +25,8 @@ #include <linux/clk.h> #include <linux/list.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_device.h> -#include <asm/mach/irq.h> #include "imx-ipu-v3.h" #include "ipu-prv.h" diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index e3b7e85120e..0bd6f47dfdc 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -14,9 +14,10 @@ #include <linux/clk.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> + #include <plat/usb-phy.h> struct exynos_ohci_hcd { diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index 9c7f5807824..dd7adff76e8 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -152,7 +152,7 @@ struct clk { }, \ .reg = _reg, \ .shift = _shift, \ - .width = _width, \ + .mask = BIT(_width) - 1, \ .flags = _mux_flags, \ .lock = _lock, \ }; \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 7f197d7addb..9fdfae74d66 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -45,6 +45,14 @@ struct clk_hw; * undo any work done in the @prepare callback. Called with * prepare_lock held. * + * @is_prepared: Queries the hardware to determine if the clock is prepared. + * This function is allowed to sleep. Optional, if this op is not + * set then the prepare count will be used. + * + * @unprepare_unused: Unprepare the clock atomically. Only called from + * clk_disable_unused for prepare clocks with special needs. + * Called with prepare mutex held. This function may sleep. + * * @enable: Enable the clock atomically. This must not return until the * clock is generating a valid clock signal, usable by consumer * devices. Called with enable_lock held. This function must not @@ -108,6 +116,8 @@ struct clk_hw; struct clk_ops { int (*prepare)(struct clk_hw *hw); void (*unprepare)(struct clk_hw *hw); + int (*is_prepared)(struct clk_hw *hw); + void (*unprepare_unused)(struct clk_hw *hw); int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); @@ -239,9 +249,14 @@ struct clk_div_table { * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is * the raw value read from the register, with the value of zero considered - * invalid + * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from * the hardware register + * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have + * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. + * Some hardware implementations gracefully handle this case and allow a + * zero divisor by not modifying their input clock + * (divide by one / bypass). */ struct clk_divider { struct clk_hw hw; @@ -255,6 +270,7 @@ struct clk_divider { #define CLK_DIVIDER_ONE_BASED BIT(0) #define CLK_DIVIDER_POWER_OF_TWO BIT(1) +#define CLK_DIVIDER_ALLOW_ZERO BIT(2) extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, @@ -274,7 +290,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * @reg: register controlling multiplexer * @shift: shift to multiplexer bit field * @width: width of mutliplexer bit field - * @num_clks: number of parent clocks + * @flags: hardware-specific flags * @lock: register lock * * Clock with multiple selectable parents. Implements .get_parent, .set_parent @@ -287,8 +303,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, struct clk_mux { struct clk_hw hw; void __iomem *reg; + u32 *table; + u32 mask; u8 shift; - u8 width; u8 flags; spinlock_t *lock; }; @@ -297,11 +314,17 @@ struct clk_mux { #define CLK_MUX_INDEX_BIT BIT(1) extern const struct clk_ops clk_mux_ops; + struct clk *clk_register_mux(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); +struct clk *clk_register_mux_table(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock); + /** * struct clk_fixed_factor - fixed multiplier and divider clock * @@ -325,6 +348,37 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned int mult, unsigned int div); +/*** + * struct clk_composite - aggregate clock of mux, divider and gate clocks + * + * @hw: handle between common and hardware-specific interfaces + * @mux_hw: handle between composite and hardware-specifix mux clock + * @div_hw: handle between composite and hardware-specifix divider clock + * @gate_hw: handle between composite and hardware-specifix gate clock + * @mux_ops: clock ops for mux + * @div_ops: clock ops for divider + * @gate_ops: clock ops for gate + */ +struct clk_composite { + struct clk_hw hw; + struct clk_ops ops; + + struct clk_hw *mux_hw; + struct clk_hw *div_hw; + struct clk_hw *gate_hw; + + const struct clk_ops *mux_ops; + const struct clk_ops *div_ops; + const struct clk_ops *gate_ops; +}; + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *div_hw, const struct clk_ops *div_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock @@ -351,6 +405,7 @@ unsigned int __clk_get_enable_count(struct clk *clk); unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); +bool __clk_is_prepared(struct clk *clk); bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); diff --git a/include/linux/clk/mxs.h b/include/linux/clk/mxs.h new file mode 100644 index 00000000000..90c30dc3efc --- /dev/null +++ b/include/linux/clk/mxs.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_CLK_MXS_H +#define __LINUX_CLK_MXS_H + +int mx23_clocks_init(void); +int mx28_clocks_init(void); +int mxs_saif_clkmux_select(unsigned int clkmux); + +#endif diff --git a/include/linux/sunxi_timer.h b/include/linux/clk/sunxi.h index 18081787e5f..e074fdd5a23 100644 --- a/include/linux/sunxi_timer.h +++ b/include/linux/clk/sunxi.h @@ -14,11 +14,9 @@ * GNU General Public License for more details. */ -#ifndef __SUNXI_TIMER_H -#define __SUNXI_TIMER_H +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ -#include <asm/mach/time.h> - -void sunxi_timer_init(void); +void __init sunxi_init_clocks(void); #endif diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 27cfda427dd..192d6d1771e 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -332,15 +332,23 @@ extern int clocksource_mmio_init(void __iomem *, const char *, extern int clocksource_i8253_init(void); +struct device_node; +typedef void(*clocksource_of_init_fn)(struct device_node *); #ifdef CONFIG_CLKSRC_OF extern void clocksource_of_init(void); #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ static const struct of_device_id __clksrc_of_table_##name \ __used __section(__clksrc_of_table) \ - = { .compatible = compat, .data = fn }; + = { .compatible = compat, \ + .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } #else -#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) +static inline void clocksource_of_init(void) {} +#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ + static const struct of_device_id __clksrc_of_table_##name \ + __attribute__((unused)) \ + = { .compatible = compat, \ + .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } #endif #endif /* _LINUX_CLOCKSOURCE_H */ diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index 3fd8e4290a1..3e203eb23cc 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -65,7 +65,6 @@ extern struct irq_chip gic_arch_extn; void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, u32 offset, struct device_node *); -void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); static inline void gic_init(unsigned int nr, int start, diff --git a/include/linux/irqchip/chained_irq.h b/include/linux/irqchip/chained_irq.h new file mode 100644 index 00000000000..adf4c30f3af --- /dev/null +++ b/include/linux/irqchip/chained_irq.h @@ -0,0 +1,52 @@ +/* + * Chained IRQ handlers support. + * + * Copyright (C) 2011 ARM Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __IRQCHIP_CHAINED_IRQ_H +#define __IRQCHIP_CHAINED_IRQ_H + +#include <linux/irq.h> + +/* + * Entry/exit functions for chained handlers where the primary IRQ chip + * may implement either fasteoi or level-trigger flow control. + */ +static inline void chained_irq_enter(struct irq_chip *chip, + struct irq_desc *desc) +{ + /* FastEOI controllers require no action on entry. */ + if (chip->irq_eoi) + return; + + if (chip->irq_mask_ack) { + chip->irq_mask_ack(&desc->irq_data); + } else { + chip->irq_mask(&desc->irq_data); + if (chip->irq_ack) + chip->irq_ack(&desc->irq_data); + } +} + +static inline void chained_irq_exit(struct irq_chip *chip, + struct irq_desc *desc) +{ + if (chip->irq_eoi) + chip->irq_eoi(&desc->irq_data); + else + chip->irq_unmask(&desc->irq_data); +} + +#endif /* __IRQCHIP_CHAINED_IRQ_H */ diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/include/linux/irqchip/mxs.h index 3f2f447ff36..9039a538a91 100644 --- a/arch/arm/mach-h720x/include/mach/timex.h +++ b/include/linux/irqchip/mxs.h @@ -1,15 +1,14 @@ /* - * arch/arm/mach-h720x/include/mach/timex.h - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. + * Copyright (C) 2013 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_TIMEX -#define __ASM_ARCH_TIMEX +#ifndef __LINUX_IRQCHIP_MXS_H +#define __LINUX_IRQCHIP_MXS_H -#define CLOCK_TICK_RATE 3686400 +extern void icoll_handle_irq(struct pt_regs *); #endif diff --git a/include/linux/irqchip/sunxi.h b/include/linux/irqchip/sunxi.h deleted file mode 100644 index 1fe2c2260e2..00000000000 --- a/include/linux/irqchip/sunxi.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __LINUX_IRQCHIP_SUNXI_H -#define __LINUX_IRQCHIP_SUNXI_H - -#include <asm/exception.h> - -extern void sunxi_init_irq(void); - -extern asmlinkage void __exception_irq_entry sunxi_handle_irq( - struct pt_regs *regs); - -#endif diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h index c256c595be5..c256c595be5 100644 --- a/include/linux/platform_data/usb-exynos.h +++ b/include/linux/platform_data/usb-ohci-exynos.h diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 3a2aa1d19b9..41a6136e353 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -33,11 +33,12 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/mxs.h> #include "mxs-saif.h" +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 + static struct mxs_saif *mxs_saif[2]; /* |