diff options
79 files changed, 1630 insertions, 589 deletions
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index e13787498bc..9b3f1d4a88d 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -1,7 +1,10 @@ * Marvell PXA GPIO controller Required properties: -- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" +- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio", + "intel,pxa27x-gpio", "intel,pxa3xx-gpio", + "marvell,pxa93x-gpio", "marvell,mmp-gpio" or + "marvell,mmp2-gpio". - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all gpio pins. There're three gpio interrupts in arch-pxa, and they're gpio0, @@ -18,7 +21,7 @@ Required properties: Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; reg = <0xd4019000 0x1000>; interrupts = <49>; interrupt-name = "gpio_mux"; diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5c8e59f6a6f..f57a6ba26e0 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -330,6 +330,13 @@ choice Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. + config DEBUG_PXA_UART1 + depends on ARCH_PXA + bool "Use PXA UART1 for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on PXA UART1. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -615,6 +622,7 @@ config DEBUG_LL_INCLUDE default "debug/bcm2835.S" if DEBUG_BCM2835 default "debug/cns3xxx.S" if DEBUG_CNS3XXX default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -624,20 +632,21 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART - default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ + DEBUG_MMP_UART3 default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 + default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "debug/vt8500.S" if DEBUG_VT8500_UART0 - default "debug/tegra.S" if DEBUG_TEGRA_UART - default "debug/ux500.S" if DEBUG_UX500_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 55196639211..853e199ea89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -61,7 +61,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ +dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ + kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ @@ -75,6 +76,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ @@ -153,7 +155,9 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7779-marzen-reference.dtb \ sh73a0-kzm9g.dtb \ + sh73a0-kzm9g-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts new file mode 100644 index 00000000000..5f21d4e427b --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "LaCie CloudBox"; + compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_uart0 + &pmx_cloudbox_sata0 >; + pinctrl-names = "default"; + + pmx_cloudbox_sata0: pmx-cloudbox-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + }; + + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio0 16 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "cloudbox:red:fail"; + gpios = <&gpio0 14 0>; + }; + blue-sata { + label = "cloudbox:blue:sata"; + gpios = <&gpio0 15 0>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 17 0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts new file mode 100644 index 00000000000..1ca66ab83ad --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS Duo v2"; + compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 + &pmx_button_power + &pmx_button_backup + &pmx_button_reset + &pmx_led_blue_power + &pmx_led_blue_activity + &pmx_led_blue_disk1 + &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + pmx_led_blue_activity: pmx-led-blue-activity { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial@12000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ + linux,default-trigger = "default-on"; + }; + activity_led { + label = "status:blue:activity_led"; + gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + }; + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + }; + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 13 1>; + }; + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 13 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index b79f5eb2558..adab1ab2573 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -3,6 +3,7 @@ /include/ "kirkwood-ns2-common.dtsi" / { + /* This machine is embedded in the first LaCie CloudBox product. */ model = "LaCie Network Space Mini v2"; compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 1429ac05b36..4e8b08c628c 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -160,7 +160,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp2-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 31a71869608..975dad21ac3 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -77,7 +77,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 825aaca3303..0247c622f58 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -89,7 +89,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts new file mode 100644 index 00000000000..72be4c87cfb --- /dev/null +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -0,0 +1,47 @@ +/* + * Reference Device Tree Source for the Marzen board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7779.dtsi" + +/ { + model = "marzen"; + compatible = "renesas,marzen-reference", "renesas,r8a7779"; + + chosen { + bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts new file mode 100644 index 00000000000..f33b5ccb744 |