aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/configs/omap1_defconfig1
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/mips/configs/db1000_defconfig1
-rw-r--r--arch/mips/configs/db1235_defconfig1
-rw-r--r--arch/mips/configs/lemote2f_defconfig1
-rw-r--r--arch/powerpc/configs/ps3_defconfig1
-rw-r--r--drivers/net/usb/usbnet.c2
-rw-r--r--drivers/staging/dwc2/Kconfig1
-rw-r--r--drivers/staging/gdm72xx/Kconfig2
-rw-r--r--drivers/usb/atm/cxacru.c3
-rw-r--r--drivers/usb/chipidea/Kconfig2
-rw-r--r--drivers/usb/chipidea/ci13xxx_imx.c15
-rw-r--r--drivers/usb/core/Kconfig2
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/dwc3/Kconfig6
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c6
-rw-r--r--drivers/usb/gadget/Kconfig1
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c2
-rw-r--r--drivers/usb/gadget/bcm63xx_udc.c1
-rw-r--r--drivers/usb/gadget/configfs.c8
-rw-r--r--drivers/usb/gadget/dummy_hcd.c5
-rw-r--r--drivers/usb/gadget/f_ecm.c1
-rw-r--r--drivers/usb/gadget/f_subset.c1
-rw-r--r--drivers/usb/gadget/f_uac2.c2
-rw-r--r--drivers/usb/gadget/fusb300_udc.c4
-rw-r--r--drivers/usb/gadget/imx_udc.c2
-rw-r--r--drivers/usb/gadget/m66592-udc.c4
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c1
-rw-r--r--drivers/usb/gadget/r8a66597-udc.c4
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c2
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c3
-rw-r--r--drivers/usb/gadget/zero.c8
-rw-r--r--drivers/usb/host/Kconfig17
-rw-r--r--drivers/usb/host/ehci-atmel.c6
-rw-r--r--drivers/usb/host/ehci-hcd.c17
-rw-r--r--drivers/usb/host/ehci-omap.c8
-rw-r--r--drivers/usb/host/ehci-orion.c6
-rw-r--r--drivers/usb/host/ehci-s5p.c5
-rw-r--r--drivers/usb/host/ehci-spear.c6
-rw-r--r--drivers/usb/host/ehci-tegra.c6
-rw-r--r--drivers/usb/host/isp1760-hcd.c2
-rw-r--r--drivers/usb/host/isp1760-if.c4
-rw-r--r--drivers/usb/host/ohci-at91.c6
-rw-r--r--drivers/usb/host/ohci-exynos.c4
-rw-r--r--drivers/usb/host/ohci-hcd.c34
-rw-r--r--drivers/usb/host/ohci-nxp.c44
-rw-r--r--drivers/usb/host/ohci-omap3.c8
-rw-r--r--drivers/usb/host/ohci-pxa27x.c6
-rw-r--r--drivers/usb/host/ohci-spear.c6
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c2
-rw-r--r--drivers/usb/host/sl811-hcd.c2
-rw-r--r--drivers/usb/host/uhci-hub.c3
-rw-r--r--drivers/usb/host/uhci-platform.c6
-rw-r--r--drivers/usb/host/uhci-q.c2
-rw-r--r--drivers/usb/host/xhci-mem.c17
-rw-r--r--drivers/usb/musb/musb_dsps.c1
-rw-r--r--drivers/usb/musb/omap2430.c3
-rw-r--r--drivers/usb/phy/Kconfig5
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c2
-rw-r--r--drivers/usb/phy/phy-fsl-usb.c1
-rw-r--r--drivers/usb/phy/phy-gpio-vbus-usb.c3
-rw-r--r--drivers/usb/phy/phy-isp1301.c1
-rw-r--r--drivers/usb/phy/phy-mv-usb.c3
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c3
-rw-r--r--drivers/usb/phy/phy-nop.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c30
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h2
-rw-r--r--drivers/usb/serial/generic.c31
-rw-r--r--drivers/usb/serial/io_ti.c22
-rw-r--r--drivers/usb/serial/option.c13
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c23
-rw-r--r--drivers/usb/serial/usb-serial.c30
-rw-r--r--drivers/usb/storage/realtek_cr.c8
-rw-r--r--include/linux/usb/gadget.h5
-rw-r--r--include/linux/usb/serial.h4
75 files changed, 268 insertions, 238 deletions
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7e0ebb64a7f..9940f7b4e43 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -199,7 +199,6 @@ CONFIG_USB_PHY=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64bc5ab..435d69b83e3 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -204,7 +204,6 @@ CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index face9d26e6d..bac26b971c5 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -228,7 +228,6 @@ CONFIG_HIDRAW=y
CONFIG_USB_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig
index 14752dde754..e2b4ad55462 100644
--- a/arch/mips/configs/db1235_defconfig
+++ b/arch/mips/configs/db1235_defconfig
@@ -344,7 +344,6 @@ CONFIG_UHID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index b6acd2f256b..343bebc4b63 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -300,7 +300,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f7919623291..139a8308070 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m
CONFIG_USB_HIDDEV=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f95cb032394..06ee82f557d 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1477,7 +1477,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
/* usbnet already took usb runtime pm, so have to enable the feature
* for usb interface, otherwise usb_autopm_get_interface may return
- * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
+ * failure if RUNTIME_PM is enabled.
*/
if (!driver->supports_autosuspend) {
driver->supports_autosuspend = 1;
diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig
index f0b4739c65a..bbee1775d49 100644
--- a/drivers/staging/dwc2/Kconfig
+++ b/drivers/staging/dwc2/Kconfig
@@ -2,7 +2,6 @@ config USB_DWC2
tristate "DesignWare USB2 DRD Core Support"
depends on USB
depends on VIRT_TO_BUS
- select USB_OTG_UTILS
help
Say Y or M here if your system has a Dual Role HighSpeed
USB controller based on the DesignWare HSOTG IP Core.
diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig
index 3c18efe3136..69059138de4 100644
--- a/drivers/staging/gdm72xx/Kconfig
+++ b/drivers/staging/gdm72xx/Kconfig
@@ -39,7 +39,7 @@ if WIMAX_GDM72XX_USB
config WIMAX_GDM72XX_USB_PM
bool "Enable power managerment support"
- depends on USB_SUSPEND
+ depends on PM_RUNTIME
endif # WIMAX_GDM72XX_USB
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index b7eb86ad6bf..8a7eb77233b 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -686,7 +686,8 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
{
int ret, len;
__le32 *buf;
- int offb, offd;
+ int offb;
+ unsigned int offd;
const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
int buflen = ((size - 1) / stride + 1 + size * 2) * 4;
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 608a2aeb400..b2df442eb3e 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
depends on USB=y || USB=USB_CHIPIDEA
- depends on USB_EHCI_HCD
+ depends on USB_EHCI_HCD=y
select USB_EHCI_ROOT_HUB_TT
help
Say Y here to enable host controller functionality of the
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8faec9dbbb8..73f9d5f15ad 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -173,17 +173,10 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
ci13xxx_imx_platdata.phy = data->phy;
- if (!pdev->dev.dma_mask) {
- pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
- sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask) {
- ret = -ENOMEM;
- dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
- goto err;
- }
- *pdev->dev.dma_mask = DMA_BIT_MASK(32);
- dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
- }
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (usbmisc_ops && usbmisc_ops->init) {
ret = usbmisc_ops->init(&pdev->dev);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 8772b365929..db535b0aa17 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -51,7 +51,7 @@ config USB_DYNAMIC_MINORS
config USB_OTG
bool "OTG support"
- depends on USB_SUSPEND
+ depends on PM_RUNTIME
default n
help
The most notable feature of USB OTG is support for a
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ab5638d9c70..a6359889507 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -88,6 +88,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Alcor Micro Corp. Hub */
+ { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index ea5ee9c21c3..757aa18027d 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -19,21 +19,21 @@ choice
config USB_DWC3_HOST
bool "Host only mode"
- depends on USB
+ depends on USB=y || USB=USB_DWC3
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
- depends on USB_GADGET
+ depends on USB_GADGET=y || USB_GADGET=USB_DWC3
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
- depends on (USB && USB_GADGET)
+ depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index a8afe6e2662..929e7dd6e58 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -95,8 +95,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused)
return 0;
}
-static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
-
static int dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos *exynos;
@@ -118,7 +116,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!dev->dma_mask)
- dev->dma_mask = &dwc3_exynos_dma_mask;
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
platform_set_drvdata(pdev, exynos);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 83300d94a89..f41aa0d0c41 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -146,7 +146,6 @@ config USB_LPC32XX
depends on ARCH_LPC32XX
depends on USB_PHY
select USB_ISP1301
- select USB_OTG_UTILS
help
This option selects the USB device controller in the LPC32xx SoC.
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index f2a970f75bf..5a5128a226f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1992,8 +1992,6 @@ err_map_regs:
err_get_hclk:
clk_put(pclk);
- platform_set_drvdata(pdev, NULL);
-
return ret;
}
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 79229779814..fd24cb4540a 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -2410,7 +2410,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev)
usb_del_gadget_udc(&udc->gadget);
BUG_ON(udc->driver);
- platform_set_drvdata(pdev, NULL);
bcm63xx_uninit_udc_hw(udc);
return 0;
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 3d5cfc9c2c7..80e7f75a56c 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -821,8 +821,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
gi->gstrings[i] = NULL;
s = usb_gstrings_attach(&gi->cdev, gi->gstrings,
USB_GADGET_FIRST_AVAIL_IDX);
- if (IS_ERR(s))
+ if (IS_ERR(s)) {
+ ret = PTR_ERR(s);
goto err_comp_cleanup;
+ }
gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id;
gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id;
@@ -847,8 +849,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
}
cfg->gstrings[i] = NULL;
s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1);
- if (IS_ERR(s))
+ if (IS_ERR(s)) {
+ ret = PTR_ERR(s);
goto err_comp_cleanup;
+ }
c->iConfiguration = s[0].id;
}
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a792e322f4f..c588e8e486e 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1001,7 +1001,6 @@ static int dummy_udc_remove(struct platform_device *pdev)
struct dummy *dum = platform_get_drvdata(pdev);
usb_del_gadget_udc(&dum->gadget);
- platform_set_drvdata(pdev, NULL);
device_remove_file(&dum->gadget.dev, &dev_attr_function);
return 0;
}
@@ -2661,8 +2660,10 @@ static int __init init(void)
}
for (i = 0; i < mod_data.num; i++) {
dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
- if (!dum[i])
+ if (!dum[i]) {
+ retval = -ENOMEM;
goto err_add_pdata;
+ }
retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
sizeof(void *));
if (retval)
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index d893d692907..abf8a31ae14 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -816,6 +816,7 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
* @c: the configuration to support the network link
* @ethaddr: a buffer in which the ethernet address of the host side
* side of the link was recorded
+ * @dev: eth_dev structure
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 185d6f5e4e4..7be04b34249 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -373,6 +373,7 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f)
* @c: the configuration to support the network link
* @ethaddr: a buffer in which the ethernet address of the host side
* side of the link was recorded
+ * @dev: eth_dev structure
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index c7468b6c07b..03c1fb68664 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -456,8 +456,6 @@ static int snd_uac2_remove(struct platform_device *pdev)
{
struct snd_card *card = platform_get_drvdata(pdev);
- platform_set_drvdata(pdev, NULL);
-
if (card)
return snd_card_free(card);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index cec8871b77f..b8632d40f8b 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1461,8 +1461,10 @@ static int __init fusb300_probe(struct platform_device *pdev)
fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
GFP_KERNEL);
- if (fusb300->ep0_req == NULL)
+ if (fusb300->ep0_req == NULL) {
+ ret = -ENOMEM;
goto clean_up3;
+ }
init_controller(fusb300);
ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index b5cebd6b0d7..9b2d24e4c95 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1511,8 +1511,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
if (pdata->exit)
pdata->exit(&pdev->dev);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 866ef099924..51cfe72da5b 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1660,8 +1660,10 @@ static int __init m66592_probe(struct platform_device *pdev)
m66592->epaddr2ep[0] = &m66592->ep[0];
m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
- if (m66592->ep0_req == NULL)
+ if (m66592->ep0_req == NULL) {
+ ret = -ENOMEM;
goto clean_up3;
+ }
m66592->ep0_req->complete = nop_completion;
init_controller(m66592);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index ef47495dec8..95c531d5aa4 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -2236,7 +2236,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
dev->transceiver = NULL;
}
- platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;
}
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 0b742d17184..7ff7d9cf206 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1977,8 +1977,10 @@ static int __init r8a66597_probe(struct platform_device *pdev)
r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
GFP_KERNEL);
- if (r8a66597->ep0_req == NULL)
+ if (r8a66597->ep0_req == NULL) {
+ ret = -ENOMEM;
goto clean_up3;
+ }
r8a66597->ep0_req->complete = nop_completion;
ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a3cdc32115d..af22f24046b 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -437,7 +437,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
if (hs_req->req.length == 0)
return;
- usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in);
+ usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
}
/**
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d0e75e1b3cc..09c4f70c93c 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1851,6 +1851,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
irq = gpio_to_irq(udc_info->vbus_pin);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
+ retval = irq;
goto err_gpio_claim;
}
@@ -1948,8 +1949,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
- platform_set_drvdata(pdev, NULL);
-
if (!IS_ERR(udc_clock) && udc_clock != NULL) {
clk_disable(udc_clock);
clk_put(udc_clock);
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2cd6262e8b7..0deb9d6cde2 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -284,12 +284,16 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
ss_opts->bulk_buflen = gzero_options.bulk_buflen;
func_ss = usb_get_function(func_inst_ss);
- if (IS_ERR(func_ss))
+ if (IS_ERR(func_ss)) {
+ status = PTR_ERR(func_ss);
goto err_put_func_inst_ss;
+ }
func_inst_lb = usb_get_function_instance("Loopback");
- if (IS_ERR(func_inst_lb))
+ if (IS_ERR(func_inst_lb)) {
+ status = PTR_ERR(func_inst_lb);
goto err_put_func_ss;
+ }
lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
lb_opts->bulk_buflen = gzero_options.bulk_buflen;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index de94f269906..344d5e2f87d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -507,7 +507,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on PCI || SPARC_LEON || ARCH_VT8500
+ depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
@@ -524,26 +524,19 @@ config USB_UHCI_HCD
config USB_UHCI_SUPPORT_NON_PCI_HC
bool
- depends on USB_UHCI_HCD
- default y if (SPARC_LEON || ARCH_VT8500)
+ default y if (SPARC_LEON || USB_UHCI_PLATFORM)
config USB_UHCI_PLATFORM
- bool "Generic UHCI Platform Driver support"
- depends on USB_UHCI_SUPPORT_NON_PCI_HC
+ bool
default y if ARCH_VT8500
- ---help---
- Enable support for generic UHCI platform devices that require no
- additional configuration.
config USB_UHCI_BIG_ENDIAN_MMIO
bool
- depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
- default y
+ default y if SPARC_LEON
config USB_UHCI_BIG_ENDIAN_DESC
bool
- depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
- default y
+ default y if SPARC_LEON
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 66420097c24..02f4611faa6 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
-static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &at91_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 312fc10da3c..246e124e6ac 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
-#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
- !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
- !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
- !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \
- !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
-#error "missing bus glue for ehci-hcd"
-#endif
-
static int __init ehci_hcd_init(void)
{
int retval = 0;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 3d1491b5f36..16d7150e855 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
.extra_priv_size = sizeof(struct omap_hcd),
};
-static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
-
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &omap_ehci_dma_mask;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
dev_name(dev));
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 54c57948515..efbc588b48c 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
}
-static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
-
static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
* now. Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ehci_orion_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 635775278c7..379037f51a2 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev)
dev_err(dev, "can't request ehci vbus gpio %d", gpio);
}
-static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
-
static int s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
@@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ehci_s5p_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -107,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
if (IS_ERR(phy)) {
/* Fallback to pdata */
if (!pdata) {
+ usb_put_hcd(hcd);
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
return -EPROBE_DEFER;
} else {
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 61ecfb3d52f..bd3e5cbc624 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
ehci_spear_drv_resume);
-static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd ;
@@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &spear_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e3eddc31ac8..59d111bf44a 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
writel(val, base + TEGRA_USB_PORTSC1);
}
-static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
setup_vbus_gpio(pdev, pdata);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 125e261f5bf..2facee53eab 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
int retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index bbb791bd761..a13709ee4e5 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev)
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
pr_warning("isp1760: IRQ resource not available\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto cleanup;
}
+
irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
if (priv) {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a0cb44f0e72..2ee1496dbc1 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
-static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &at91_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 07592c00af2..b0b542c14e3 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
-static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
-
static int exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
@@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ohci_exynos_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9e6de9586ae..fc627fd5411 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -233,14 +233,14 @@ static int ohci_urb_enqueue (
urb->start_frame = frame;
}
} else if (ed->type == PIPE_ISOCHRONOUS) {
- u16 next = ohci_frame_no(ohci) + 2;
+ u16 next = ohci_frame_no(ohci) + 1;
u16 frame = ed->last_iso + ed->interval;
/* Behind the scheduling threshold? */
if (unlikely(tick_before(frame, next))) {
/* USB_ISO_ASAP: Round up to the first available slot */
- if (urb->transfer_flags & URB_ISO_ASAP)
+ if (urb->transfer_flags & URB_ISO_ASAP) {
frame += (next - frame + ed->interval - 1) &
-ed->interval;
@@ -248,21 +248,25 @@ static int ohci_urb_enqueue (
* Not ASAP: Use the next slot in the stream. If
* the entire URB falls before the threshold, fail.
*/
- else if (tick_before(frame + ed->interval *
+ } else {
+ if (tick_before(frame + ed->interval *
(urb->number_of_packets - 1), next)) {
- retval = -EXDEV;
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- goto fail;
- }
+ retval = -EXDEV;
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
- /*
- * Some OHCI hardware doesn't handle late TDs
- * correctly. After retiring them it proceeds to
- * the next ED instead of the next TD. Therefore
- * we have to omit the late TDs entirely.
- */
- urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
- ed->interval);
+ /*
+ * Some OHCI hardware doesn't handle late TDs
+ * correctly. After retiring them it proceeds
+ * to the next ED instead of the next TD.
+ * Therefore we have to omit the late TDs
+ * entirely.
+ */
+ urb_priv->td_cnt = DIV_ROUND_UP(
+ (u16) (next - frame),
+ ed->interval);
+ }
}
urb->start_frame = frame;
}
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index f303cb04c2d..5d7eb72c506 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
isp1301_i2c_client = isp1301_get_client(isp1301_node);
if (!isp1301_i2c_client) {
- ret = -EPROBE_DEFER;
- goto out;
+ return -EPROBE_DEFER;
}
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (usb_disabled()) {
dev_err(&pdev->dev, "USB is disabled\n");
ret = -ENODEV;
- goto out;
+ goto fail_disable;
}
/* Enable AHB slave USB clock, needed for further USB clock control */
@@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_pll_clk)) {
dev_err(&pdev->dev, "failed to acquire USB PLL\n");
ret = PTR_ERR(usb_pll_clk);
- goto out1;
+ goto fail_pll;
}
ret = clk_enable(usb_pll_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB PLL\n");
- goto out2;
+ goto fail_pllen;
}
ret = clk_set_rate(usb_pll_clk, 48000);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set USB clock rate\n");
- goto out3;
+ goto fail_rate;
}
/* Enable USB device clock */
@@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_dev_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_dev_clk);
- goto out4;
+ goto fail_dev;
}
ret = clk_enable(usb_dev_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
- goto out5;
+ goto fail_deven;
}
/* Enable USB otg clocks */
@@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_otg_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_otg_clk);
- goto out6;
+ goto fail_otg;
}
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
@@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
ret = clk_enable(usb_otg_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
- goto out7;
+ goto fail_otgen;
}
isp1301_configure();
@@ -296,14 +295,14 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (!hcd) {
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
ret = -ENOMEM;
- goto out8;
+ goto fail_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
- goto out8;
+ goto fail_resource;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
@@ -311,7 +310,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = -ENXIO;
- goto out8;
+ goto fail_resource;
}
nxp_start_hc();
@@ -325,23 +324,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
return ret;
nxp_stop_hc();
-out8:
+fail_resource:
usb_put_hcd(hcd);
-out7:
+fail_hcd:
clk_disable(usb_otg_clk);
-out6:
+fail_otgen:
clk_put(usb_otg_clk);
-out5:
+fail_otg:
clk_disable(usb_dev_clk);
-out4:
+fail_deven:
clk_put(usb_dev_clk);
-out3:
+fail_dev:
+fail_rate:
clk_disable(usb_pll_clk);
-out2:
+fail_pllen:
clk_put(usb_pll_clk);
-out1:
+fail_pll:
+fail_disable:
isp1301_i2c_client = NULL;
-out:
return ret;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index ddfc31427bc..8663851c8d8 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = {
/*-------------------------------------------------------------------------*/
-static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
-
/*
* configure so an HC device and id are always provided
* always called with process context; sleeping is OK
@@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &omap_ohci_dma_mask;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
dev_name(dev));
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index efe71f3ca47..279b2ef1741 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
-static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int ohci_pxa_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &pxa_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 9020bf0e2ec..3e19e0170d1 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
-static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
{
const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &spear_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4f0f0339532..0f401dbfaf0 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
int ports, i, retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ad4483efb6d..b2ec7fe758d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
* and usb-storage.
*
* TODO:
- * - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
+ * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
* - various issues noted in the code
* - performance work; use both register banks; ...
* - use urb->iso_frame_desc[] with ISO transfers
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f87bee6d278..9189bc984c9 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
/* auto-stop if nothing connected for 1 second */
if (any_ports_active(uhci))
uhci->rh_state = UHCI_RH_RUNNING;
- else if (time_after_eq(jiffies, uhci->auto_stop_time))
+ else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+ !uhci->wait_for_hp)
suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
break;
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 8c4dace4b14..f1db61ada6a 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = {
.hub_control = uhci_hub_control,
};
-static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
-
static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &platform_uhci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
pdev->name);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f0976d8190b..041c6ddb695 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
return -EINVAL; /* Can't change the period */
} else {
- next = uhci->frame_number + 2;
+ next = uhci->frame_number + 1;
/* Find the next unused frame */
if (list_empty(&qh->queue)) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 965b539bc47..2cfc465925b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
/* Set the max packet size and max burst */
+ max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+ max_burst = 0;
switch (udev->speed) {
case USB_SPEED_SUPER:
- max_packet = usb_endpoint_maxp(&ep->desc);
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
/* dig out max burst from ep companion desc */
- max_packet = ep->ss_ep_comp.bMaxBurst;
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
+ max_burst = ep->ss_ep_comp.bMaxBurst;
break;
case USB_SPEED_HIGH:
+ /* Some devices get this wrong */
+ if (usb_endpoint_xfer_bulk(&ep->desc))
+ max_packet = 512;
/* bits 11:12 specify the number of additional transaction
* opportunities per microframe (USB 2.0, section 9.6.6)
*/
@@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
usb_endpoint_xfer_int(&ep->desc)) {
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
}
- /* Fall through */
+ break;
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
break;
default:
BUG();
}
+ ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
+ MAX_BURST(max_burst));
max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 3a18e44e939..e1b661d0402 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -560,6 +560,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
if (!config) {
dev_err(&pdev->dev,
"failed to allocate musb hdrc config\n");
+ ret = -ENOMEM;
goto err2;
}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 3551f1a30c6..628b93fe5cc 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -549,7 +549,8 @@ static int omap2430_probe(struct platform_device *pdev)
glue->control_otghs = omap_get_control_dev();
if (IS_ERR(glue->control_otghs)) {
dev_vdbg(&pdev->dev, "Failed to get control device\n");
- return -ENODEV;
+ ret = PTR_ERR(glue->control_otghs);
+ goto err2;
}
} else {
glue->control_otghs = ERR_PTR(-ENODEV);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 371d0e74e90..7ef3eb8617a 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -25,7 +25,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
select USB_OTG
help
Enable this to support Freescale USB OTG transceiver.
@@ -139,7 +139,6 @@ config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
- select USB_OTG_UTILS
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
@@ -162,7 +161,7 @@ config USB_MSM_OTG
config USB_MV_OTG
tristate "Marvell USB OTG support"
- depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
+ depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
select USB_OTG
help
Say Y here if you want to build Marvell USB OTG transciever
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 4acef26a2ef..e5eb1b5a04e 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -892,8 +892,6 @@ static int ab8500_usb_remove(struct platform_device *pdev)
else if (ab->mode == USB_PERIPHERAL)
ab8500_usb_peri_phy_dis(ab);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 97b9308507c..e771bafb9f1 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -799,6 +799,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
/* initialize the otg structure */
fsl_otg_tc->phy.label = DRIVER_DESC;
+ fsl_otg_tc->phy.dev = &pdev->dev;
fsl_otg_tc->phy.set_power = fsl_otg_set_power;
fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy;
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index 4c76074e518..8443335c2ea 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -266,6 +266,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gpio_vbus);
gpio_vbus->dev = &pdev->dev;
gpio_vbus->phy.label = "gpio-vbus";
+ gpio_vbus->phy.dev = gpio_vbus->dev;
gpio_vbus->phy.set_power = gpio_vbus_set_power;
gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
@@ -343,7 +344,6 @@ err_irq:
gpio_free(pdata->gpio_pullup);
gpio_free(pdata->gpio_vbus);
err_gpio:
- platform_set_drvdata(pdev, NULL);
kfree(gpio_vbus->phy.otg);
kfree(gpio_vbus);
return err;
@@ -365,7 +365,6 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
if (gpio_is_valid(pdata->gpio_pullup))
gpio_free(pdata->gpio_pullup);
gpio_free(gpio);
- platform_set_drvdata(pdev, NULL);
kfree(gpio_vbus->phy.otg);
kfree(gpio_vbus);
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 225ae6c97ee..8a55b37d1a0 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -102,6 +102,7 @@ static int isp1301_probe(struct i2c_client *client,
mutex_init(&isp->mutex);
phy = &isp->phy;
+ phy->dev = &client->dev;
phy->label = DRV_NAME;
phy->init = isp1301_phy_init;
phy->set_vbus = isp1301_phy_set_vbus;
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index c987bbe2785..4a6b03c7387 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -667,7 +667,6 @@ int mv_otg_remove(struct platform_device *pdev)
mv_otg_disable(mvotg);
usb_remove_phy(&mvotg->phy);
- platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -850,8 +849,6 @@ err_destroy_workqueue:
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
- platform_set_drvdata(pdev, NULL);
-
return retval;
}
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index eb25dd2a142..bd601c537c8 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -155,6 +155,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
mxs_phy->phy.set_suspend = mxs_phy_suspend;
mxs_phy->phy.notify_connect = mxs_phy_on_connect;
mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
+ mxs_phy->phy.type = USB_PHY_TYPE_USB2;
ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
@@ -175,8 +176,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
usb_remove_phy(&mxs_phy->phy);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c
index 2b10cc969bb..638cc5dade3 100644
--- a/drivers/usb/phy/phy-nop.c
+++ b/drivers/usb/phy/phy-nop.c
@@ -254,8 +254,6 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev)
usb_remove_phy(&nop->phy);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 242b5776648..7260ec66034 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -189,6 +189,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
+ { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) },
+ { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -924,8 +926,8 @@ static int ftdi_tiocmset(struct tty_struct *tty,
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static int ftdi_chars_in_buffer(struct tty_struct *tty);
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static bool ftdi_tx_empty(struct usb_serial_port *port);
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
@@ -961,7 +963,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .chars_in_buffer = ftdi_chars_in_buffer,
+ .tx_empty = ftdi_tx_empty,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -2056,27 +2058,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
}
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
+static bool ftdi_tx_empty(struct usb_serial_port *port)
{
- struct usb_serial_port *port = tty->driver_data;
- int chars;
unsigned char buf[2];
int ret;
- chars = usb_serial_generic_chars_in_buffer(tty);
- if (chars)
- goto out;
-
- /* Check if hardware buffer is empty. */
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret == 2) {
if (!(buf[1] & FTDI_RS_TEMT))
- chars = 1;
+ return false;
}
-out:
- dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
- return chars;
+ return true;
}
/* old_termios contains the original termios settings and tty->termios contains
@@ -2268,10 +2261,9 @@ no_c_cflag_changes:
* Returns the number of status bytes retrieved (device dependant), or
* negative error code.
*/
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2])
{
- struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
@@ -2336,7 +2328,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
unsigned char buf[2];
int ret;
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret < 0)
return ret;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 98528270c43..6dd79253205 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -772,6 +772,8 @@
*/
#define NEWPORT_VID 0x104D
#define NEWPORT_AGILIS_PID 0x3000
+#define NEWPORT_CONEX_CC_PID 0x3002
+#define NEWPORT_CONEX_AGP_PID 0x3006
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 297665fdd16..ba45170c78e 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -253,6 +253,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
}
EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
+void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int bps;
+ unsigned long period;
+ unsigned long expire;
+
+ bps = tty_get_baud_rate(tty);
+ if (!bps)
+ bps = 9600; /* B0 */
+ /*
+ * Use a poll-period of roughly the time it takes to send one
+ * character or at least one jiffy.
+ */
+ period = max_t(unsigned long, (10 * HZ / bps), 1);
+ period = min_t(unsigned long, period, timeout);
+
+ dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
+ __func__, jiffies_to_msecs(timeout),
+ jiffies_to_msecs(period));
+ expire = jiffies + timeout;
+ while (!port->serial->type->tx_empty(port)) {
+ schedule_timeout_interruptible(period);
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
+
static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
int index, gfp_t mem_flags)
{
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 158bf4bc29c..1be6ba7bee2 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2019,8 +2019,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- int ret;
-
if (edge_port == NULL)
return 0;
@@ -2028,16 +2026,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
chars = kfifo_len(&edge_port->write_fifo);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- if (!chars) {
- ret = tx_active(edge_port);
- if (ret > 0)
- chars = ret;
- }
-
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+static bool edge_tx_empty(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ int ret;
+
+ ret = tx_active(edge_port);
+ if (ret > 0)
+ return false;
+
+ return true;
+}
+
static void edge_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2557,6 +2561,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
@@ -2589,6 +2594,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 734372846ab..93d02bc4eb5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -196,6 +196,7 @@ static void option_instat_callback(struct urb *urb);
#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */
#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
+#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
@@ -341,8 +342,8 @@ static void option_instat_callback(struct urb *urb);
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
-#define CINTERION_PRODUCT_AH6 0x0055
-#define CINTERION_PRODUCT_PLS8 0x0060
+#define CINTERION_PRODUCT_AHXX 0x0055
+#define CINTERION_PRODUCT_PLXX 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -771,6 +772,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -966,6 +968,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
@@ -1264,8 +1268,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index cac47aef291..c92c5ed4e58 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -101,6 +101,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count);
static int ti_write_room(struct tty_struct *tty);
static int ti_chars_in_buffer(struct tty_struct *tty);
+static bool ti_tx_empty(struct usb_serial_port *port);
static void ti_throttle(struct tty_struct *tty);
static void ti_unthrottle(struct tty_struct *tty);
static int ti_ioctl(struct tty_struct *tty,
@@ -222,6 +223,7 @@ static struct usb_serial_driver ti_1port_device = {
.write = ti_write,
.write_room = ti_write_room,
.chars_in_buffer = ti_chars_in_buffer,
+ .tx_empty = ti_tx_empty,
.throttle = ti_throttle,
.unthrottle = ti_unthrottle,
.ioctl = ti_ioctl,
@@ -253,6 +255,7 @@ static struct usb_serial_driver ti_2port_device = {
.write = ti_write,
.write_room = ti_write_room,
.chars_in_buffer = ti_chars_in_buffer,
+ .tx_empty = ti_tx_empty,
.throttle = ti_throttle,
.unthrottle = ti_unthrottle,
.ioctl = ti_ioctl,
@@ -684,8 +687,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
struct ti_port *tport = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- int ret;
- u8 lsr;
if (tport == NULL)
return 0;
@@ -694,16 +695,22 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
chars = kfifo_len(&tport->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- if (!chars) {
- ret = ti_get_lsr(tport, &lsr);
- if (!ret && !(lsr & TI_LSR_TX_EMPTY))
- chars = 1;
- }
-
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+static bool ti_tx_empty(struct usb_serial_port *port)
+{
+ struct ti_port *tport = usb_get_serial_port_data(port);
+ int ret;
+ u8 lsr;
+
+ ret = ti_get_lsr(tport, &lsr);
+ if (!ret && !(lsr & TI_LSR_TX_EMPTY))
+ return false;
+
+ return true;
+}
static void ti_throttle(struct tty_struct *tty)
{
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cf75beb1251..4753c005cfb 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -359,20 +359,29 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
- int count = 0;
dev_dbg(tty->dev, "%s\n", __func__);
- mutex_lock(&serial->disc_mutex);
- /* if the device was unplugged then any remaining characters
- fell out of the connector ;) */
if (serial->disconnected)
- count = 0;
- else
- count = serial->type->chars_in_buffer(tty);
- mutex_unlock(&serial->disc_mutex);
+ return 0;
+
+ return serial->type->chars_in_buffer(tty);
+}
+
+static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+
+ dev_dbg(tty->dev, "%s\n", __func__);
+
+ if (!port->serial->type->wait_until_sent)
+ return;
- return count;
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ port->serial->type->wait_until_sent(tty, timeout);
+ mutex_unlock(&serial->disc_mutex);
}
static void serial_throttle(struct tty_struct *tty)
@@ -1191,6 +1200,7 @@ static const struct tty_operations serial_ops = {
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
+ .wait_until_sent = serial_wait_until_sent,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
@@ -1316,6 +1326,8 @@ static void usb_serial_operations_init(struct usb_serial_driver *device)
set_to_generic_if_null(device, close);
set_to_generic_if_null(device, write_room);
set_to_generic_if_null(device, chars_in_buffer);
+ if (device->tx_empty)
+ set_to_generic_if_null(device, wait_until_sent);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, process_read_urb);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 8623577bbbe..281be56d564 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -105,8 +105,9 @@ struct rts51x_chip {
int status_len;
u32 flag;
-#ifdef CONFIG_REALTEK_AUTOPM
struct us_data *us;
+
+#ifdef CONFIG_REALTEK_AUTOPM
struct timer_list rts51x_suspend_timer;
unsigned long timer_expires;
int pwr_state;
@@ -988,6 +989,7 @@ static int init_realtek_cr(struct us_data *us)
us->extra = chip;
us->extra_destructor = realtek_cr_destructor;
us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
+ chip->us = us;
usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
@@ -1010,10 +1012,8 @@ static int init_realtek_cr(struct us_data *us)
SET_AUTO_DELINK(chip);
}
#ifdef CONFIG_REALTEK_AUTOPM
- if (ss_en) {
- chip->us = us;
+ if (ss_en)
realtek_cr_autosuspend_setup(us);
- }
#endif
usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index c454a88abf2..f1b0dca60f1 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
}
/**
- * gadget_is_superspeed() - return true if the hardware handles
- * supperspeed
- * @g: controller that might support supper speed
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
*/
static inline int gadget_is_superspeed(struct usb_gadget *g)
{
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b9b0f7b4e43..302ddf55d2d 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -268,6 +268,8 @@ struct usb_serial_driver {
struct usb_serial_port *port, struct ktermios *old);
void (*break_ctl)(struct tty_struct *tty, int break_state);
int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+ bool (*tx_empty)(struct usb_serial_port *port);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
int (*tiocmget)(struct tty_struct *tty);
@@ -327,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port);
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+ long timeout);
extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);