diff options
| -rw-r--r-- | drivers/usb/core/hub.c | 39 | ||||
| -rw-r--r-- | drivers/usb/core/hub.h | 3 |
2 files changed, 34 insertions, 8 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 868ad745a50..b93fc88c482 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2855,6 +2855,15 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev) USB_CTRL_SET_TIMEOUT); } +/* Count of wakeup-enabled devices at or below udev */ +static unsigned wakeup_enabled_descendants(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + + return udev->do_remote_wakeup + + (hub ? hub->wakeup_enabled_descendants : 0); +} + /* * usb_port_suspend - suspend a usb device's upstream port * @udev: device that's no longer in active use, not a root hub @@ -2895,8 +2904,8 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev) * Linux (2.6) currently has NO mechanisms to initiate that: no khubd * timer, no SRP, no requests through sysfs. * - * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get - * suspended only when their bus goes into global suspend (i.e., the root + * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get + * suspended until their bus goes into global suspend (i.e., the root * hub is suspended). Nevertheless, we change @udev->state to * USB_STATE_SUSPENDED as this is the device's "logical" state. The actual * upstream port setting is stored in @udev->port_is_suspended. @@ -2967,15 +2976,21 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) /* see 7.1.7.6 */ if (hub_is_superspeed(hub->hdev)) status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3); - else if (PMSG_IS_AUTO(msg)) - status = set_port_feature(hub->hdev, port1, - USB_PORT_FEAT_SUSPEND); + /* * For system suspend, we do not need to enable the suspend feature * on individual USB-2 ports. The devices will automatically go * into suspend a few ms after the root hub stops sending packets. * The USB 2.0 spec calls this "global suspend". + * + * However, many USB hubs have a bug: They don't relay wakeup requests + * from a downstream port if the port's suspend feature isn't on. + * Therefore we will turn on the suspend feature if udev or any of its + * descendants is enabled for remote wakeup. */ + else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0) + status = set_port_feature(hub->hdev, port1, + USB_PORT_FEAT_SUSPEND); else { really_suspend = false; status = 0; @@ -3010,15 +3025,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) if (!PMSG_IS_AUTO(msg)) status = 0; } else { - /* device has up to 10 msec to fully suspend */ dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n", (PMSG_IS_AUTO(msg) ? "auto-" : ""), udev->do_remote_wakeup); - usb_set_device_state(udev, USB_STATE_SUSPENDED); if (really_suspend) { udev->port_is_suspended = 1; + + /* device has up to 10 msec to fully suspend */ msleep(10); } + usb_set_device_state(udev, USB_STATE_SUSPENDED); } /* @@ -3300,7 +3316,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) unsigned port1; int status; - /* Warn if children aren't already suspended */ + /* + * Warn if children aren't already suspended. + * Also, add up the number of wakeup-enabled descendants. + */ + hub->wakeup_enabled_descendants = 0; for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; @@ -3310,6 +3330,9 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) if (PMSG_IS_AUTO(msg)) return -EBUSY; } + if (udev) + hub->wakeup_enabled_descendants += + wakeup_enabled_descendants(udev); } if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) { diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 80ab9ee0701..f608b39beaf 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -59,6 +59,9 @@ struct usb_hub { struct usb_tt tt; /* Transaction Translator */ unsigned mA_per_port; /* current for each child */ +#ifdef CONFIG_PM + unsigned wakeup_enabled_descendants; +#endif unsigned limited_power:1; unsigned quiescing:1; |