diff options
-rw-r--r-- | drivers/regulator/Kconfig | 9 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/max8997.c | 1213 | ||||
-rw-r--r-- | include/linux/mfd/max8997.h | 28 |
4 files changed, 1250 insertions, 1 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e1d943619ab..395d35941b8 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -108,6 +108,15 @@ config REGULATOR_MAX8952 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS modes ranging from 0.77V to 1.40V by 0.01V steps. +config REGULATOR_MAX8997 + tristate "Maxim 8997/8966 regulator" + depends on MFD_MAX8997 + help + This driver controls a Maxim 8997/8966 regulator + via I2C bus. The provided regulator is suitable for S5PC110, + S5PV210, and Exynos-4 chips to control VCC_CORE and + VCC_USIM voltages. + config REGULATOR_MAX8998 tristate "Maxim 8998 voltage regulator" depends on MFD_MAX8998 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0b5e88c2b8d..e43b8524871 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o +obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c new file mode 100644 index 00000000000..01ef7e9903b --- /dev/null +++ b/drivers/regulator/max8997.c @@ -0,0 +1,1213 @@ +/* + * max8997.c - Regulator driver for the Maxim 8997/8966 + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@smasung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8998.c + */ + +#include <linux/bug.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/max8997.h> +#include <linux/mfd/max8997-private.h> + +struct max8997_data { + struct device *dev; + struct max8997_dev *iodev; + int num_regulators; + struct regulator_dev **rdev; + int ramp_delay; /* in mV/us */ + + u8 buck1_vol[8]; + u8 buck2_vol[8]; + u8 buck5_vol[8]; + int buck125_gpioindex; + + u8 saved_states[MAX8997_REG_MAX]; +}; + +static inline void max8997_set_gpio(struct max8997_data *max8997) +{ + struct max8997_platform_data *pdata = + dev_get_platdata(max8997->iodev->dev); + int set3 = (max8997->buck125_gpioindex) & 0x1; + int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1; + int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1; + + gpio_set_value(pdata->buck125_gpios[0], set1); + gpio_set_value(pdata->buck125_gpios[1], set2); + gpio_set_value(pdata->buck125_gpios[2], set3); +} + +struct voltage_map_desc { + int min; + int max; + int step; + unsigned int n_bits; +}; + +/* Voltage maps in mV */ +static const struct voltage_map_desc ldo_voltage_map_desc = { + .min = 800, .max = 3950, .step = 50, .n_bits = 6, +}; /* LDO1 ~ 18, 21 all */ + +static const struct voltage_map_desc buck1245_voltage_map_desc = { + .min = 650, .max = 2225, .step = 25, .n_bits = 6, +}; /* Buck1, 2, 4, 5 */ + +static const struct voltage_map_desc buck37_voltage_map_desc = { + .min = 750, .max = 3900, .step = 50, .n_bits = 6, +}; /* Buck3, 7 */ + +/* current map in mA */ +static const struct voltage_map_desc charger_current_map_desc = { + .min = 200, .max = 950, .step = 50, .n_bits = 4, +}; + +static const struct voltage_map_desc topoff_current_map_desc = { + .min = 50, .max = 200, .step = 10, .n_bits = 4, +}; + +static const struct voltage_map_desc *reg_voltage_map[] = { + [MAX8997_LDO1] = &ldo_voltage_map_desc, + [MAX8997_LDO2] = &ldo_voltage_map_desc, + [MAX8997_LDO3] = &ldo_voltage_map_desc, + [MAX8997_LDO4] = &ldo_voltage_map_desc, + [MAX8997_LDO5] = &ldo_voltage_map_desc, + [MAX8997_LDO6] = &ldo_voltage_map_desc, + [MAX8997_LDO7] = &ldo_voltage_map_desc, + [MAX8997_LDO8] = &ldo_voltage_map_desc, + [MAX8997_LDO9] = &ldo_voltage_map_desc, + [MAX8997_LDO10] = &ldo_voltage_map_desc, + [MAX8997_LDO11] = &ldo_voltage_map_desc, + [MAX8997_LDO12] = &ldo_voltage_map_desc, + [MAX8997_LDO13] = &ldo_voltage_map_desc, + [MAX8997_LDO14] = &ldo_voltage_map_desc, + [MAX8997_LDO15] = &ldo_voltage_map_desc, + [MAX8997_LDO16] = &ldo_voltage_map_desc, + [MAX8997_LDO17] = &ldo_voltage_map_desc, + [MAX8997_LDO18] = &ldo_voltage_map_desc, + [MAX8997_LDO21] = &ldo_voltage_map_desc, + [MAX8997_BUCK1] = &buck1245_voltage_map_desc, + [MAX8997_BUCK2] = &buck1245_voltage_map_desc, + [MAX8997_BUCK3] = &buck37_voltage_map_desc, + [MAX8997_BUCK4] = &buck1245_voltage_map_desc, + [MAX8997_BUCK5] = &buck1245_voltage_map_desc, + [MAX8997_BUCK6] = NULL, + [MAX8997_BUCK7] = &buck37_voltage_map_desc, + [MAX8997_EN32KHZ_AP] = NULL, + [MAX8997_EN32KHZ_CP] = NULL, + [MAX8997_ENVICHG] = NULL, + [MAX8997_ESAFEOUT1] = NULL, + [MAX8997_ESAFEOUT2] = NULL, + [MAX8997_CHARGER_CV] = NULL, + [MAX8997_CHARGER] = &charger_current_map_desc, + [MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc, +}; + +static inline int max8997_get_rid(struct regulator_dev *rdev) +{ + return rdev_get_id(rdev); +} + +static int max8997_list_voltage_safeout(struct regulator_dev *rdev, + unsigned int selector) +{ + int rid = max8997_get_rid(rdev); + + if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) { + switch (selector) { + case 0: + return 4850000; + case 1: + return 4900000; + case 2: + return 4950000; + case 3: + return 3300000; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev, + unsigned int selector) +{ + int rid = max8997_get_rid(rdev); + + if (rid != MAX8997_CHARGER_CV) + goto err; + + switch (selector) { + case 0x00: + return 4200000; + case 0x01 ... 0x0E: + return 4000000 + 20000 * (selector - 0x01); + case 0x0F: + return 4350000; + default: + return -EINVAL; + } +err: + return -EINVAL; +} + +static int max8997_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct voltage_map_desc *desc; + int rid = max8997_get_rid(rdev); + int val; + + if (rid >= ARRAY_SIZE(reg_voltage_map) || + rid < 0) + return -EINVAL; + + desc = reg_voltage_map[rid]; + if (desc == NULL) + return -EINVAL; + + val = desc->min + desc->step * selector; + if (val > desc->max) + return -EINVAL; + + return val * 1000; +} + +static int max8997_get_enable_register(struct regulator_dev *rdev, + int *reg, int *mask, int *pattern) +{ + int rid = max8997_get_rid(rdev); + + switch (rid) { + case MAX8997_LDO1 ... MAX8997_LDO21: + *reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1); + *mask = 0xC0; + *pattern = 0xC0; + break; + case MAX8997_BUCK1: + *reg = MAX8997_REG_BUCK1CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_BUCK2: + *reg = MAX8997_REG_BUCK2CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_BUCK3: + *reg = MAX8997_REG_BUCK3CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_BUCK4: + *reg = MAX8997_REG_BUCK4CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_BUCK5: + *reg = MAX8997_REG_BUCK5CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_BUCK6: + *reg = MAX8997_REG_BUCK6CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_BUCK7: + *reg = MAX8997_REG_BUCK7CTRL; + *mask = 0x01; + *pattern = 0x01; + break; + case MAX8997_EN32KHZ_AP ... MAX8997_EN32KHZ_CP: + *reg = MAX8997_REG_MAINCON1; + *mask = 0x01 << (rid - MAX8997_EN32KHZ_AP); + *pattern = 0x01 << (rid - MAX8997_EN32KHZ_AP); + break; + case MAX8997_ENVICHG: + *reg = MAX8997_REG_MBCCTRL1; + *mask = 0x80; + *pattern = 0x80; + break; + case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2: + *reg = MAX8997_REG_SAFEOUTCTRL; + *mask = 0x40 << (rid - MAX8997_ESAFEOUT1); + *pattern = 0x40 << (rid - MAX8997_ESAFEOUT1); + break; + case MAX8997_CHARGER: + *reg = MAX8997_REG_MBCCTRL2; + *mask = 0x40; + *pattern = 0x40; + break; + default: + /* Not controllable or not exists */ + return -EINVAL; + break; + } + + return 0; +} + +static int max8997_reg_is_enabled(struct regulator_dev *rdev) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int ret, reg, mask, pattern; + u8 val; + + ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); + if (ret == -EINVAL) + return 1; /* "not controllable" */ + else if (ret) + return ret; + + ret = max8997_read_reg(i2c, reg, &val); + if (ret) + return ret; + + return (val & mask) == pattern; +} + +static int max8997_reg_enable(struct regulator_dev *rdev) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int ret, reg, mask, pattern; + + ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); + if (ret) + return ret; + + return max8997_update_reg(i2c, reg, pattern, mask); +} + +static int max8997_reg_disable(struct regulator_dev *rdev) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int ret, reg, mask, pattern; + + ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); + if (ret) + return ret; + + return max8997_update_reg(i2c, reg, ~pattern, mask); +} + +static int max8997_get_voltage_register(struct regulator_dev *rdev, + int *_reg, int *_shift, int *_mask) +{ + int rid = max8997_get_rid(rdev); + int reg, shift = 0, mask = 0x3f; + + switch (rid) { + case MAX8997_LDO1 ... MAX8997_LDO21: + reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1); + break; + case MAX8997_BUCK1: + reg = MAX8997_REG_BUCK1DVS1; + break; + case MAX8997_BUCK2: + reg = MAX8997_REG_BUCK2DVS1; + break; + case MAX8997_BUCK3: + reg = MAX8997_REG_BUCK3DVS; + break; + case MAX8997_BUCK4: + reg = MAX8997_REG_BUCK4DVS; + break; + case MAX8997_BUCK5: + reg = MAX8997_REG_BUCK5DVS1; + break; + case MAX8997_BUCK7: + reg = MAX8997_REG_BUCK7DVS; + break; + case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2: + reg = MAX8997_REG_SAFEOUTCTRL; + shift = (rid == MAX8997_ESAFEOUT2) ? 2 : 0; + mask = 0x3; + break; + case MAX8997_CHARGER_CV: + reg = MAX8997_REG_MBCCTRL3; + shift = 0; + mask = 0xf; + break; + case MAX8997_CHARGER: + reg = MAX8997_REG_MBCCTRL4; + shift = 0; + mask = 0xf; + break; + case MAX8997_CHARGER_TOPOFF: + reg = MAX8997_REG_MBCCTRL5; + shift = 0; + mask = 0xf; + break; + default: + return -EINVAL; + } + + *_reg = reg; + *_shift = shift; + *_mask = mask; + + return 0; +} + +static int max8997_get_voltage(struct regulator_dev *rdev) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct max8997_platform_data *pdata = + dev_get_platdata(max8997->iodev->dev); + struct i2c_client *i2c = max8997->iodev->i2c; + int reg, shift, mask, ret; + int rid = max8997_get_rid(rdev); + u8 val; + + ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) || + (rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) || + (rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs)) + reg += max8997->buck125_gpioindex; + + ret = max8997_read_reg(i2c, reg, &val); + if (ret) + return ret; + + val >>= shift; + val &= mask; + + if (rdev->desc && rdev->desc->ops && rdev->desc->ops->list_voltage) + return rdev->desc->ops->list_voltage(rdev, val); + + /* + * max8997_list_voltage returns value for any rdev with voltage_map, + * which works for "CHARGER" and "CHARGER TOPOFF" that do not have + * list_voltage ops (they are current regulators). + */ + return max8997_list_voltage(rdev, val); +} + +static inline int max8997_get_voltage_proper_val( + const struct voltage_map_desc *desc, + int min_vol, int max_vol) +{ + int i = 0; + + if (desc == NULL) + return -EINVAL; + + if (max_vol < desc->min || min_vol > desc->max) + return -EINVAL; + + while (desc->min + desc->step * i < min_vol && + desc->min + desc->step * i < desc->max) + i++; + + if (desc->min + desc->step * i > max_vol) + return -EINVAL; + + if (i >= (1 << desc->n_bits)) + return -EINVAL; + + return i; +} + +static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev, + int min_uV, int max_uV, unsigned *selector) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int rid = max8997_get_rid(rdev); + int lb, ub; + int reg, shift = 0, mask, ret = 0; + u8 val = 0x0; + + if (rid != MAX8997_CHARGER_CV) + return -EINVAL; + + ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + if (max_uV < 4000000 || min_uV > 4350000) + return -EINVAL; + + if (min_uV <= 4000000) { + if (max_uV >= 4000000) + return -EINVAL; + else + val = 0x1; + } else if (min_uV <= 4200000 && max_uV >= 4200000) + val = 0x0; + else { + lb = (min_uV - 4000001) / 20000 + 2; + ub = (max_uV - 4000000) / 20000 + 1; + + if (lb > ub) + return -EINVAL; + + if (lb < 0xf) + val = lb; + else { + if (ub >= 0xf) + val = 0xf; + else + return -EINVAL; + } + } + + *selector = val; + + ret = max8997_update_reg(i2c, reg, val << shift, mask); + + return ret; +} + +/* + * For LDO1 ~ LDO21, BUCK1~5, BUCK7, CHARGER, CHARGER_TOPOFF + * BUCK1, 2, and 5 are available if they are not controlled by gpio + */ +static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, + int min_uV, int max_uV, unsigned *selector) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const struct voltage_map_desc *desc; + int rid = max8997_get_rid(rdev); + int reg, shift = 0, mask, ret; + int i; + u8 org; + + switch (rid) { + case MAX8997_LDO1 ... MAX8997_LDO21: + break; + case MAX8997_BUCK1 ... MAX8997_BUCK5: + break; + case MAX8997_BUCK6: + return -EINVAL; + case MAX8997_BUCK7: + break; + case MAX8997_CHARGER: + break; + case MAX8997_CHARGER_TOPOFF: + break; + default: + return -EINVAL; + } + + desc = reg_voltage_map[rid]; + + i = max8997_get_voltage_proper_val(desc, min_vol, max_vol); + if (i < 0) + return i; + + ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + max8997_read_reg(i2c, reg, &org); + org = (org & mask) >> shift; + + ret = max8997_update_reg(i2c, reg, i << shift, mask << shift); + *selector = i; + + if (rid == MAX8997_BUCK1 || rid == MAX8997_BUCK2 || + rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) { + /* If the voltage is increasing */ + if (org < i) + udelay(desc->step * (i - org) / max8997->ramp_delay); + } + + return ret; +} + +/* + * Assess the damage on the voltage setting of BUCK1,2,5 by the change. + * + * When GPIO-DVS mode is used for multiple bucks, changing the voltage value + * of one of the bucks may affect that of another buck, which is the side + * effect of the change (set_voltage). This function examines the GPIO-DVS + * configurations and checks whether such side-effect exists. + */ +static int max8997_assess_side_effect(struct regulator_dev *rdev, + u8 new_val, int *best) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct max8997_platform_data *pdata = + dev_get_platdata(max8997->iodev->dev); + int rid = max8997_get_rid(rdev); + u8 *buckx_val[3]; + bool buckx_gpiodvs[3]; + int side_effect[8]; + int min_side_effect = INT_MAX; + int i; + + *best = -1; + + switch (rid) { + case MAX8997_BUCK1: + rid = 0; + break; + case MAX8997_BUCK2: + rid = 1; + break; + case MAX8997_BUCK5: + rid = 2; + break; + default: + return -EINVAL; + } + + buckx_val[0] = max8997->buck1_vol; + buckx_val[1] = max8997->buck2_vol; + buckx_val[2] = max8997->buck5_vol; + buckx_gpiodvs[0] = pdata->buck1_gpiodvs; + buckx_gpiodvs[1] = pdata->buck2_gpiodvs; + buckx_gpiodvs[2] = pdata->buck5_gpiodvs; + + for (i = 0; i < 8; i++) { + int others; + + if (new_val != (buckx_val[rid])[i]) { + side_effect[i] = -1; + continue; + } + + side_effect[i] = 0; + for (others = 0; others < 3; others++) { + int diff; + + if (others == rid) + continue; + if (buckx_gpiodvs[others] == false) + continue; /* Not affected */ + diff = (buckx_val[others])[i] - + (buckx_val[others])[max8997->buck125_gpioindex]; + if (diff > 0) + side_effect[i] += diff; + else if (diff < 0) + side_effect[i] -= diff; + } + if (side_effect[i] == 0) { + *best = i; + return 0; /* NO SIDE EFFECT! Use This! */ + } + if (side_effect[i] < min_side_effect) { + min_side_effect = side_effect[i]; + *best = i; + } + } + + if (*best == -1) + return -EINVAL; + + return side_effect[*best]; +} + +/* + * For Buck 1 ~ 5 and 7. If it is not controlled by GPIO, this calls + * max8997_set_voltage_ldobuck to do the job. + */ +static int max8997_set_voltage_buck(struct regulator_dev *rdev, + int min_uV, int max_uV, unsigned *selector) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct max8997_platform_data *pdata = + dev_get_platdata(max8997->iodev->dev); + int rid = max8997_get_rid(rdev); + const struct voltage_map_desc *desc; + int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg; + bool gpio_dvs_mode = false; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + + if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7) + return -EINVAL; + + switch (rid) { + case MAX8997_BUCK1: + if (pdata->buck1_gpiodvs) + gpio_dvs_mode = true; + break; + case MAX8997_BUCK2: + if (pdata->buck2_gpiodvs) + gpio_dvs_mode = true; + break; + case MAX8997_BUCK5: + if (pdata->buck5_gpiodvs) + gpio_dvs_mode = true; + break; + } + + if (!gpio_dvs_mode) + return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV, + selector); + + desc = reg_voltage_map[rid]; + new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol); + if (new_val < 0) + return new_val; + + tmp_dmg = INT_MAX; + tmp_idx = -1; + tmp_val = -1; + do { + damage = max8997_assess_side_effect(rdev, new_val, &new_idx); + if (damage == 0) + goto out; + + if (tmp_dmg > damage) { + tmp_idx = new_idx; + tmp_val = new_val; + tmp_dmg = damage; + } + + new_val++; + } while (desc->min + desc->step + new_val <= desc->max); + + new_idx = tmp_idx; + new_val = tmp_val; + + if (pdata->ignore_gpiodvs_side_effect == false) + return -EINVAL; + + dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:" + " %d -> %d\n", max8997->buck125_gpioindex, tmp_idx); + +out: + if (new_idx < 0 || new_val < 0) + return -EINVAL; + + max8997->buck125_gpioindex = new_idx; + max8997_set_gpio(max8997); + *selector = new_val; + + return 0; +} + +static const int safeoutvolt[] = { + 3300000, + 4850000, + 4900000, + 4950000, +}; + +/* For SAFEOUT1 and SAFEOUT2 */ +static int max8997_set_voltage_safeout(struct regulator_dev *rdev, + int min_uV, int max_uV, unsigned *selector) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int rid = max8997_get_rid(rdev); + int reg, shift = 0, mask, ret; + int i = 0; + u8 val; + + if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) { + if (min_uV <= safeoutvolt[i] && + max_uV >= safeoutvolt[i]) + break; + } + + if (i >= ARRAY_SIZE(safeoutvolt)) + return -EINVAL; + + if (i == 0) + val = 0x3; + else + val = i - 1; + + ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + ret = max8997_update_reg(i2c, reg, val << shift, mask << shift); + *selector = val; + + return ret; +} + +static int max8997_reg_enable_suspend(struct regulator_dev *rdev) +{ + return 0; +} + +static int max8997_reg_disable_suspend(struct regulator_dev *rdev) +{ + struct max8997_data *max8997 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8997->iodev->i2c; + int ret, reg, mask, pattern; + int rid = max8997_get_rid(rdev); + + ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); + if (ret) + return ret; + + max8997_read_reg(i2c, reg, &max8997->saved_states[rid]); + + if (rid == MAX8997_LDO1 || + rid == MAX8997_LDO10 || + rid == MAX8997_LDO21) { + dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n", + rdev->desc->name); + return max8997_update_reg(i2c, reg, 0x40, mask); + } + + dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n", + rdev->desc->name, max8997->saved_states[rid] & mask, + (~pattern) & mask); + return max8997_update_reg(i2c, reg, ~pattern, mask); +} + +static struct regulator_ops max8997_ldo_ops = { + .list_voltage = max8997_list_voltage, + .is_enabled = max8997_reg_is_enabled, + .enable = max8997_reg_enable, + .disable = max8997_reg_disable, + .get_voltage = max8997_get_voltage, + .set_voltage = max8997_set_voltage_ldobuck, + .set_suspend_enable = max8997_reg_enable_suspend, + .set_suspend_disable = max8997_reg_disable_suspend, +}; + +static struct regulator_ops max8997_buck_ops = { + .list_voltage = max8997_list_voltage, + .is_enabled = max8997_reg_is_enabled, + .enable = max8997_reg_enable, + .disable = max8997_reg_disable, + .get_voltage = max8997_get_voltage, + .set_voltage = max8997_set_voltage_buck, + .set_suspend_enable = max8997_reg_enable_suspend, + .set_suspend_disable = max8997_reg_disable_suspend, +}; + +static struct regulator_ops max8997_fixedvolt_ops = { + .list_voltage = max8997_list_voltage, + .is_enabled = max8997_reg_is_enabled, + .enable = max8997_reg_enable, + .disable = max8997_reg_disable, + .set_suspend_enable = max8997_reg_enable_suspend, + .set_suspend_disable = max8997_reg_disable_suspend, +}; + +static struct regulator_ops max8997_safeout_ops = { + .list_voltage = max8997_list_voltage_safeout, + .is_enabled = max8997_reg_is_enabled, + .enable = max8997_reg_enable, + .disable = max8997_reg_disable, + .get_voltage = max8997_get_voltage, + .set_voltage = max8997_set_voltage_safeout, + .set_suspend_enable = max8997_reg_enable_suspend, + .set_suspend_disable = max8997_reg_disable_suspend, +}; + +static struct regulator_ops max8997_fixedstate_ops = { + .list_voltage = max8997_list_voltage_charger_cv, + .get_voltage = max8997_get_voltage, + .set_voltage = max8997_set_voltage_charger_cv, +}; + +static int max8997_set_voltage_ldobuck_wrap(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + unsigned dummy; + + return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV, &dummy); +} + + +static struct regulator_ops max8997_charger_ops = { + .is_enabled = max8997_reg_is_enabled, + .enable = max8997_reg_enable, + .disable = max8997_reg_disable, + .get_current_limit = max8997_get_voltage, + .set_current_limit = max8997_set_voltage_ldobuck_wrap, +}; + +static struct regulator_ops max8997_charger_fixedstate_ops = { + .is_enabled = max8997_reg_is_enabled, + .get_current_limit = max8997_get_voltage, + .set_current_limit = max8997_set_voltage_ldobuck_wrap, +}; + +#define regulator_desc_ldo(num) { \ + .name = "LDO"#num, \ + .id = MAX8997_LDO##num, \ + .ops = &max8997_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ +} +#define regulator_desc_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX8997_BUCK##num, \ + .ops = &max8997_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo(1), + regulator_desc_ldo(2), + regulator_desc_ldo(3), + regulator_desc_ldo(4), + regulator_desc_ldo(5), + regulator_desc_ldo(6), + regulator_desc_ldo(7), + regulator_desc_ldo(8), + regulator_desc_ldo(9), + regulator_desc_ldo(10), + regulator_desc_ldo(11), + regulator_desc_ldo(12), + regulator_desc_ldo(13), + regulator_desc_ldo(14), + regulator_desc_ldo(15), + regulator_desc_ldo(16), + regulator_desc_ldo(17), + regulator_desc_ldo(18), + regulator_desc_ldo(21), + regulator_desc_buck(1), + regulator_desc_buck(2), + regulator_desc_buck(3), + regulator_desc_buck(4), + regulator_desc_buck(5), + { + .name = "BUCK6", + .id = MAX8997_BUCK6, + .ops = &max8997_fixedvolt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + regulator_desc_buck(7), + { + .name = "EN32KHz AP", + .id = MAX8997_EN32KHZ_AP, + .ops = &max8997_fixedvolt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "EN32KHz CP", + .id = MAX8997_EN32KHZ_CP, + .ops = &max8997_fixedvolt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "ENVICHG", + .id = MAX8997_ENVICHG, + .ops = &max8997_fixedvolt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "ESAFEOUT1", + .id = MAX8997_ESAFEOUT1, + .ops = &max8997_safeout_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "ESAFEOUT2", + .id = MAX8997_ESAFEOUT2, + .ops = &max8997_safeout_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "CHARGER CV", + .id = MAX8997_CHARGER_CV, + .ops = &max8997_fixedstate_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "CHARGER", + .id = MAX8997_CHARGER, + .ops = &max8997_charger_ops, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + }, { + .name = "CHARGER TOPOFF", + .id = MAX8997_CHARGER_TOPOFF, + .ops = &max8997_charger_fixedstate_ops, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + }, +}; + +static __devinit int max8997_pmic_probe(struct platform_device *pdev) +{ + struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev); + struct regulator_dev **rdev; + struct max8997_data *max8997; + struct i2c_client *i2c; + int i, ret, size; + u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0; + + if (!pdata) { + dev_err(pdev->dev.parent, "No platform init data supplied.\n"); + return -ENODEV; + } + + max8997 = kzalloc(sizeof(struct max8997_data), GFP_KERNEL); + if (!max8997) + return -ENOMEM; + + size = sizeof(struct regulator_dev *) * pdata->num_regulators; + max8997->rdev = kzalloc(size, GFP_KERNEL); + if (!max8997->rdev) { + kfree(max8997); + return -ENOMEM; + } + + rdev = max8997->rdev; + max8997->dev = &pdev->dev; + max8997->iodev = iodev; + max8997->num_regulators = pdata->num_regulators; + platform_set_drvdata(pdev, max8997); + i2c = max8997->iodev->i2c; + + max8997->buck125_gpioindex = pdata->buck125_default_idx; + + for (i = 0; i < 8; i++) { + max8997->buck1_vol[i] = ret = + max8997_get_voltage_proper_val( + &buck1245_voltage_map_desc, + pdata->buck1_voltage[i] / 1000, + pdata->buck1_voltage[i] / 1000 + + buck1245_voltage_map_desc.step); + if (ret < 0) + goto err_alloc; + + max8997->buck2_vol[i] = ret = + max8997_get_voltage_proper_val( + &buck1245_voltage_map_desc, + pdata->buck2_voltage[i] / 1000, + pdata->buck2_voltage[i] / 1000 + + buck1245_voltage_map_desc.step); + if (ret < 0) + goto err_alloc; + + max8997->buck5_vol[i] = ret = + max8997_get_voltage_proper_val( + &buck1245_voltage_map_desc, + pdata->buck5_voltage[i] / 1000, + pdata->buck5_voltage[i] / 1000 + + buck1245_voltage_map_desc.step); + if (ret < 0) + goto err_alloc; + + if (max_buck1 < max8997->buck1_vol[i]) + max_buck1 = max8997->buck1_vol[i]; + if (max_buck2 < max8997->buck2_vol[i]) + max_buck2 = max8997->buck2_vol[i]; + if (max_buck5 < max8997->buck5_vol[i]) + max_buck5 = max8997->buck5_vol[i]; + } + + /* For the safety, set max voltage before setting up */ + for (i = 0; i < 8; i++) { + max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1), + max_buck1, 0x3f); + max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1), + max_buck2, 0x3f); + max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1), + max_buck5, 0x3f); + } + + /* + * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them. + * If at least one of them cares, set gpios. + */ + if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || + pdata->buck5_gpiodvs) { + bool gpio1set = false, gpio2set = false; + + if (!gpio_is_valid(pdata->buck125_gpios[0]) || + !gpio_is_valid(pdata->buck125_gpios[1]) || + !gpio_is_valid(pdata->buck125_gpios[2])) { + dev_err(&pdev->dev, "GPIO NOT VALID\n"); + ret = -EINVAL; + goto err_alloc; + } + + ret = gpio_request(pdata->buck125_gpios[0], + "MAX8997 SET1"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request" + " on SET1\n"); + else if (ret) + goto err_alloc; + else + gpio1set = true; + + ret = gpio_request(pdata->buck125_gpios[1], + "MAX8997 SET2"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request" + " on SET2\n"); + else if (ret) { + if (gpio1set) + gpio_free(pdata->buck125_gpios[0]); + goto err_alloc; + } else + gpio2set = true; + + ret = gpio_request(pdata->buck125_gpios[2], + "MAX8997 SET3"); + if (ret == -EBUSY) + dev_warn(&pdev->dev, "Duplicated gpio request" + " on SET3\n"); + else if (ret) { + if (gpio1set) + gpio_free(pdata->buck125_gpios[0]); + if (gpio2set) + gpio_free(pdata->buck125_gpios[1]); + goto err_alloc; + } + + gpio_direction_output(pdata->buck125_gpios[0], + (max8997->buck125_gpioindex >> 2) + & 0x1); /* SET1 */ + gpio_direction_output(pdata->buck125_gpios[1], + (max8997->buck125_gpioindex >> 1) + & 0x1); /* SET2 */ + gpio_direction_output(pdata->buck125_gpios[2], + (max8997->buck125_gpioindex >> 0) + & 0x1); /* SET3 */ + ret = 0; + } + + /* DVS-GPIO disabled */ + max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ? + (1 << 1) : (0 << 1), 1 << 1); + max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ? + (1 << 1) : (0 << 1), 1 << 1); + max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ? + (1 << 1) : (0 << 1), 1 << 1); + + /* Initialize all the DVS related BUCK registers */ + for (i = 0; i < 8; i++) { + max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1), + max8997->buck1_vol[i], + 0x3f); + max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1), + max8997->buck2_vol[i], + 0x3f); + max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1), + max8997->buck5_vol[i], + 0x3f); + } + + for (i = 0; i < pdata->num_regulators; i++) { + const struct voltage_map_desc *desc; + int id = pdata->regulators[i].id; + + desc = reg_voltage_map[id]; + if (desc) + regulators[id].n_voltages = + (desc->max - desc->min) / desc->step + 1; + else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) + regulators[id].n_voltages = 4; + else if (id == MAX8997_CHARGER_CV) + regulators[id].n_voltages = 16; + + rdev[i] = regulator_register(®ulators[id], max8997->dev, + pdata->regulators[i].initdata, max8997); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(max8997->dev, "regulator init failed for %d\n", + id); + rdev[i] = NULL; + goto err; + } + } + + /* Misc Settings */ + max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ + max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); + + return 0; +err: + for (i = 0; i < max8997->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); +err_alloc: + kfree(max8997->rdev); + kfree(max8997); + + return ret; +} + +static int __devexit max8997_pmic_remove(struct platform_device *pdev) +{ + struct max8997_data *max8997 = platform_get_drvdata(pdev); + struct regulator_dev **rdev = max8997->rdev; + int i; + + for (i = 0; i < max8997->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + kfree(max8997->rdev); + kfree(max8997); + + return 0; +} + +static const struct platform_device_id max8997_pmic_id[] = { + { "max8997-pmic", 0}, + { }, +}; + +static struct platform_driver max8997_pmic_driver = { + .driver = { + .name = "max8997-pmic", + .owner = THIS_MODULE, + }, + .probe = max8997_pmic_probe, + .remove = __devexit_p(max8997_pmic_remove), + .id_table = max8997_pmic_id, +}; + +static int __init max8997_pmic_init(void) +{ + return platform_driver_register(&max8997_pmic_driver); +} +subsys_initcall(max8997_pmic_init); + +static void __exit max8997_pmic_cleanup(void) +{ + platform_driver_unregister(&max8997_pmic_driver); +} +module_exit(max8997_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 8997/8966 Regulator Driver"); +MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index d0d9136c104..cb671b3451b 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -68,6 +68,8 @@ enum max8998_regulators { MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ MAX8997_CHARGER, /* charger current, MBCCTRL4 */ MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ + + MAX8997_REG_MAX, }; struct max8997_regulator_data { @@ -77,7 +79,31 @@ struct max8997_regulator_data { struct max8997_platform_data { bool wakeup; - /* PMIC: Not implemented */ + /* IRQ: Not implemented */ + /* ---- PMIC ---- */ + struct max8997_regulator_data *regulators; + int num_regulators; + + /* + * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore, + * With buckx_gpiodvs enabled, the buckx cannot be controlled + * independently. To control buckx (of 1, 2, and 5) independently, + * disable buckx_gpiodvs and control with BUCKxDVS1 register. + * + * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage + * on buckx will change the voltage of bucky at the same time. + * + */ + bool ignore_gpiodvs_side_effect; + int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */ + int buck125_default_idx; /* Default value of SET1, 2, 3 */ + unsigned int buck1_voltage[8]; /* buckx_voltage in uV */ + bool buck1_gpiodvs; + unsigned int buck2_voltage[8]; + bool buck2_gpiodvs; + unsigned int buck5_voltage[8]; + bool buck5_gpiodvs; + /* MUIC: Not implemented */ /* HAPTIC: Not implemented */ /* RTC: Not implemented */ |