diff options
53 files changed, 1452 insertions, 611 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 8ffbc25376a..840f7d64d48 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -165,3 +165,21 @@ Description: Not all drivers support this attribute. If it isn't supported, attempts to read or write it will yield I/O errors. + +What: /sys/devices/.../power/pm_qos_latency_us +Date: March 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../power/pm_qos_resume_latency_us attribute + contains the PM QoS resume latency limit for the given device, + which is the maximum allowed time it can take to resume the + device, after it has been suspended at run time, from a resume + request to the moment the device will be ready to process I/O, + in microseconds. If it is equal to 0, however, this means that + the PM QoS resume latency may be arbitrary. + + Not all drivers support this attribute. If it isn't supported, + it is not present. + + This attribute has no effect on system-wide suspend/resume and + hibernation. diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt new file mode 100644 index 00000000000..6528e215c5f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -0,0 +1,21 @@ +* Samsung Exynos Power Domains + +Exynos processors include support for multiple power domains which are used +to gate power to one or more peripherals on the processor. + +Required Properties: +- compatiable: should be one of the following. + * samsung,exynos4210-pd - for exynos4210 type power domain. +- reg: physical base address of the controller and length of memory mapped + region. + +Optional Properties: +- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off + state during boot and remains to be turned-off until explicitly turned-on. + +Example: + + lcd0: power-domain-lcd0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x10>; + }; diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 20af7def23c..872815cd41d 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -96,6 +96,12 @@ struct dev_pm_ops { int (*thaw)(struct device *dev); int (*poweroff)(struct device *dev); int (*restore)(struct device *dev); + int (*suspend_late)(struct device *dev); + int (*resume_early)(struct device *dev); + int (*freeze_late)(struct device *dev); + int (*thaw_early)(struct device *dev); + int (*poweroff_late)(struct device *dev); + int (*restore_early)(struct device *dev); int (*suspend_noirq)(struct device *dev); int (*resume_noirq)(struct device *dev); int (*freeze_noirq)(struct device *dev); @@ -305,7 +311,7 @@ Entering System Suspend ----------------------- When the system goes into the standby or memory sleep state, the phases are: - prepare, suspend, suspend_noirq. + prepare, suspend, suspend_late, suspend_noirq. 1. The prepare phase is meant to prevent races by preventing new devices from being registered; the PM core would never know that all the @@ -324,7 +330,12 @@ When the system goes into the standby or memory sleep state, the phases are: appropriate low-power state, depending on the bus type the device is on, and they may enable wakeup events. - 3. The suspend_noirq phase occurs after IRQ handlers have been disabled, + 3 For a number of devices it is convenient to split suspend into the + "quiesce device" and "save device state" phases, in which cases + suspend_late is meant to do the latter. It is always executed after + runtime power management has been disabled for all devices. + + 4. The suspend_noirq phase occurs after IRQ handlers have been disabled, which means that the driver's interrupt handler will not be called while the callback method is running. The methods should save the values of the device's registers that weren't saved previously and finally put the @@ -359,7 +370,7 @@ Leaving System Suspend ---------------------- When resuming from standby or memory sleep, the phases are: - resume_noirq, resume, complete. + resume_noirq, resume_early, resume, complete. 1. The resume_noirq callback methods should perform any actions needed before the driver's interrupt handlers are invoked. This generally @@ -375,14 +386,18 @@ When resuming from standby or memory sleep, the phases are: device driver's ->pm.resume_noirq() method to perform device-specific actions. - 2. The resume methods should bring the the device back to its operating + 2. The resume_early methods should prepare devices for the execution of + the resume methods. This generally involves undoing the actions of the + preceding suspend_late phase. + + 3 The resume methods should bring the the device back to its operating state, so that it can perform normal I/O. This generally involves undoing the actions of the suspend phase. - 3. The complete phase uses only a bus callback. The method should undo the - actions of the prepare phase. Note, however, that new children may be - registered below the device as soon as the resume callbacks occur; it's - not necessary to wait until the complete phase. + 4. The complete phase should undo the actions of the prepare phase. Note, + however, that new children may be registered below the device as soon as + the resume callbacks occur; it's not necessary to wait until the + complete phase. At the end of these phases, drivers should be as functional as they were before suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are @@ -429,8 +444,8 @@ an image of the system memory while everything is stable, reactivate all devices (thaw), write the image to permanent storage, and finally shut down the system (poweroff). The phases used to accomplish this are: - prepare, freeze, freeze_noirq, thaw_noirq, thaw, complete, - prepare, poweroff, poweroff_noirq + prepare, freeze, freeze_late, freeze_noirq, thaw_noirq, thaw_early, + thaw, complete, prepare, poweroff, poweroff_late, poweroff_noirq 1. The prepare phase is discussed in the "Entering System Suspend" section above. @@ -441,7 +456,11 @@ system (poweroff). The phases used to accomplish this are: save time it's best not to do so. Also, the device should not be prepared to generate wakeup events. - 3. The freeze_noirq phase is analogous to the suspend_noirq phase discussed + 3. The freeze_late phase is analogous to the suspend_late phase described + above, except that the device should not be put in a low-power state and + should not be allowed to generate wakeup events by it. + + 4. The freeze_noirq phase is analogous to the suspend_noirq phase discussed above, except again that the device should not be put in a low-power state and should not be allowed to generate wakeup events. @@ -449,15 +468,19 @@ At this point the system image is created. All devices should be inactive and the contents of memory should remain undisturbed while this happens, so that the image forms an atomic snapshot of the system state. - 4. The thaw_noirq phase is analogous to the resume_noirq phase discussed + 5. The thaw_noirq phase is analogous to the resume_noirq phase discussed above. The main difference is that its methods can assume the device is in the same state as at the end of the freeze_noirq phase. - 5. The thaw phase is analogous to the resume phase discussed above. Its + 6. The thaw_early phase is analogous to the resume_early phase described + above. Its methods should undo the actions of the preceding + freeze_late, if necessary. + + 7. The thaw phase is analogous to the resume phase discussed above. Its methods should bring the device back to an operating state, so that it can be used for saving the image if necessary. - 6. The complete phase is discussed in the "Leaving System Suspend" section + 8. The complete phase is discussed in the "Leaving System Suspend" section above. At this point the system image is saved, and the devices then need to be @@ -465,16 +488,19 @@ prepared for the upcoming system shutdown. This is much like suspending them before putting the system into the standby or memory sleep state, and the phases are similar. - 7. The prepare phase is discussed above. + 9. The prepare phase is discussed above. + + 10. The poweroff phase is analogous to the suspend phase. - 8. The poweroff phase is analogous to the suspend phase. + 11. The poweroff_late phase is analogous to the suspend_late phase. - 9. The poweroff_noirq phase is analogous to the suspend_noirq phase. + 12. The poweroff_noirq phase is analogous to the suspend_noirq phase. -The poweroff and poweroff_noirq callbacks should do essentially the same things -as the suspend and suspend_noirq callbacks. The only notable difference is that -they need not store the device register values, because the registers should -already have been stored during the freeze or freeze_noirq phases. +The poweroff, poweroff_late and poweroff_noirq callbacks should do essentially +the same things as the suspend, suspend_late and suspend_noirq callbacks, +respectively. The only notable difference is that they need not store the +device register values, because the registers should already have been stored +during the freeze, freeze_late or freeze_noirq phases. Leaving Hibernation @@ -518,22 +544,25 @@ To achieve this, the image kernel must restore the devices' pre-hibernation functionality. The operation is much like waking up from the memory sleep state, although it involves different phases: - restore_noirq, restore, complete + restore_noirq, restore_early, restore, complete 1. The restore_noirq phase is analogous to the resume_noirq phase. - 2. The restore phase is analogous to the resume phase. + 2. The restore_early phase is analogous to the resume_early phase. + + 3. The restore phase is analogous to the resume phase. - 3. The complete phase is discussed above. + 4. The complete phase is discussed above. -The main difference from resume[_noirq] is that restore[_noirq] must assume the -device has been accessed and reconfigured by the boot loader or the boot kernel. -Consequently the state of the device may be different from the state remembered -from the freeze and freeze_noirq phases. The device may even need to be reset -and completely re-initialized. In many cases this difference doesn't matter, so -the resume[_noirq] and restore[_norq] method pointers can be set to the same -routines. Nevertheless, different callback pointers are used in case there is a -situation where it actually matters. +The main difference from resume[_early|_noirq] is that restore[_early|_noirq] +must assume the device has been accessed and reconfigured by the boot loader or +the boot kernel. Consequently the state of the device may be different from the +state remembered from the freeze, freeze_late and freeze_noirq phases. The +device may even need to be reset and completely re-initialized. In many cases +this difference doesn't matter, so the resume[_early|_noirq] and +restore[_early|_norq] method pointers can be set to the same routines. +Nevertheless, different callback pointers are used in case there is a situation +where it actually does matter. Device Power Management Domains diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index ebd7490ef1d..ec715cd78fb 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -63,6 +63,27 @@ devices have been reinitialized, the function thaw_processes() is called in order to clear the PF_FROZEN flag for each frozen task. Then, the tasks that have been frozen leave __refrigerator() and continue running. + +Rationale behind the functions dealing with freezing and thawing of tasks: +------------------------------------------------------------------------- + +freeze_processes(): + - freezes only userspace tasks + +freeze_kernel_threads(): + - freezes all tasks (including kernel threads) because we can't freeze + kernel threads without freezing userspace tasks + +thaw_kernel_threads(): + - thaws only kernel threads; this is particularly useful if we need to do + anything special in between thawing of kernel threads and thawing of + userspace tasks, or if we want to postpone the thawing of userspace tasks + +thaw_processes(): + - thaws all tasks (including kernel threads) because we can't thaw userspace + tasks without thawing kernel threads + + III. Which kernel threads are freezable? Kernel threads are not freezable by default. However, a kernel thread may clear diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5d602f68a0e..dfad6538b27 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -34,6 +34,7 @@ config CPU_EXYNOS4210 select ARM_CPU_SUSPEND if PM select S5P_PM if PM select S5P_SLEEP if PM + select PM_GENERIC_DOMAINS help Enable EXYNOS4210 CPU support @@ -74,11 +75,6 @@ config EXYNOS4_SETUP_FIMD0 help Common setup code for FIMD0. -config EXYNOS4_DEV_PD - bool - help - Compile in platform device definitions for Power Domain - config EXYNOS4_DEV_SYSMMU bool help @@ -195,7 +191,6 @@ config MACH_SMDKV310 select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_DEV_SYSMMU @@ -243,7 +238,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 @@ -277,7 +271,6 @@ config MACH_NURI select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -310,7 +303,6 @@ config MACH_ORIGEN select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 5fc202cdfdb..d9191f9a7af 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_EXYNOS4) += pmu.o @@ -45,7 +46,6 @@ obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o diff --git a/arch/arm/mach-exynos/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c deleted file mode 100644 index 3273f25d6a7..00000000000 --- a/arch/arm/mach-exynos/dev-pd.c +++ /dev/null @@ -1,139 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-pd.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Power Domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <mach/regs-pmu.h> - -#include <plat/pd.h> - -static int exynos4_pd_enable(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - u32 timeout; - - __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base); - - /* Wait max 1ms */ - timeout = 10; - while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) - != S5P_INT_LOCAL_PWR_EN) { - if (timeout == 0) { - printk(KERN_ERR "Power domain %s enable failed.\n", - dev_name(dev)); - return -ETIMEDOUT; - } - timeout--; - udelay(100); - } - - return 0; -} - -static int exynos4_pd_disable(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - u32 timeout; - - __raw_writel(0, pdata->base); - - /* Wait max 1ms */ - timeout = 10; - while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) { - if (timeout == 0) { - printk(KERN_ERR "Power domain %s disable failed.\n", - dev_name(dev)); - return -ETIMEDOUT; - } - timeout--; - udelay(100); - } - - return 0; -} - -struct platform_device exynos4_device_pd[] = { - { - .name = "samsung-pd", - .id = 0, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_MFC_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 1, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_G3D_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 2, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_LCD0_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 3, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_LCD1_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 4, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_TV_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 5, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_CAM_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 6, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_GPS_CONF, - }, - }, - }, -}; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 435261f83f4..aa37179d776 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1263,9 +1263,6 @@ static struct platform_device *nuri_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_CAM], &s5p_device_fimc_md, /* NURI Devices */ @@ -1315,14 +1312,6 @@ static void __init nuri_machine_init(void) /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; - - s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev; } MACHINE_START(NURI, "NURI") diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 0679b8ad2d1..fa5c4a59b0a 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -621,13 +621,6 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_r, &s5p_device_mixer, &exynos4_device_ohci, - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_GPS], - &exynos4_device_pd[PD_MFC], &origen_device_gpiokeys, &origen_lcd_hv070wsa, }; @@ -695,13 +688,6 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; - - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; - - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; - samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); } diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index b2c5557f50e..5258b856367 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -277,13 +277,6 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_GPS], &exynos4_device_spdif, &exynos4_device_sysmmu, &samsung_asoc_dma, @@ -336,10 +329,6 @@ static void s5p_tv_setup(void) WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug")); s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); - - /* setup dependencies between TV devices */ - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; } static void __init smdkv310_map_io(void) @@ -379,7 +368,6 @@ static void __init smdkv310_machine_init(void) clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(SMDKV310, "SMDKV310") diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 38939956c34..b2d495b3109 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -971,7 +971,6 @@ static struct platform_device *universal_devices[] __initdata = { &s3c_device_i2c5, &s5p_device_i2c_hdmiphy, &hdmi_fixed_voltage, - &exynos4_device_pd[PD_TV], &s5p_device_hdmi, &s5p_device_sdo, &s5p_device_mixer, @@ -984,9 +983,6 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_CAM], &cam_i_core_fixed_reg_dev, &cam_s_if_fixed_reg_dev, &s5p_device_fimc_md, @@ -1005,10 +1001,6 @@ void s5p_tv_setup(void) gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); - - /* setup dependencies between TV devices */ - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; } static void __init universal_reserve(void) @@ -1042,15 +1034,6 @@ static void __init universal_machine_init(void) /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); - - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; - - s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c new file mode 100644 index 00000000000..0b04af2b13c --- /dev/null +++ b/arch/arm/mach-exynos/pm_domains.c @@ -0,0 +1,195 @@ +/* + * Exynos Generic power domain support. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Implementation of Exynos specific power domain control which is used in + * conjunction with runtime-pm. Support for both device-tree and non-device-tree + * based power domain support is included. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/io.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/pm_domain.h> +#include <linux/delay.h> +#include <linux/of_address.h> + +#include <mach/regs-pmu.h> +#include <plat/devs.h> + +/* + * Exynos specific wrapper around the generic power domain + */ +struct exynos_pm_domain { + void __iomem *base; + char const *name; + bool is_off; + struct generic_pm_domain pd; +}; + +static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) +{ + struct exynos_pm_domain *pd; + void __iomem *base; + u32 timeout, pwr; + char *op; + + pd = container_of(domain, struct exynos_pm_domain, pd); + base = pd->base; + + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; + __raw_writel(pwr, base); + + /* Wait max 1ms */ + timeout = 10; + + while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) { + if (!timeout) { + op = (power_on) ? "enable" : "disable"; + pr_err("Power domain %s %s failed\n", domain->name, op); + return -ETIMEDOUT; + } + timeout--; + cpu_relax(); + usleep_range(80, 100); + } + return 0; +} + +static int exynos_pd_power_on(struct generic_pm_domain *domain) +{ + return exynos_pd_power(domain, true); +} + +static int exynos_pd_power_off(struct generic_pm_domain *domain) +{ + return exynos_pd_power(domain, false); +} + +#define EXYNOS_GPD(PD, BASE, NAME) \ +static struct exynos_pm_domain PD = { \ + .base = (void __iomem *)BASE, \ + .name = NAME, \ + .pd = { \ + .power_off = exynos_pd_power_off, \ + .power_on = exynos_pd_power_on, \ + }, \ +} + +#ifdef CONFIG_OF +static __init int exynos_pm_dt_parse_domains(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct exynos_pm_domain *pd; + + pd = kzalloc(sizeof(*pd), GFP_KERNEL); + if (!pd) { + pr_err("%s: failed to allocate memory for domain\n", + __func__); + return -ENOMEM; + } + + if (of_get_property(np, "samsung,exynos4210-pd-off", NULL)) + pd->is_off = true; + pd->name = np->name; + pd->base = of_iomap(np, 0); + pd->pd.power_off = exynos_pd_power_off; + pd->pd.power_on = exynos_pd_power_on; + pd->pd.of_node = np; + pm_genpd_init(&pd->pd, NULL, false); + } + return 0; +} +#else +static __init int exynos_pm_dt_parse_domains(void) +{ + return 0; +} +#endif /* CONFIG_OF */ + +static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, + struct exynos_pm_domain *pd) +{ + if (pdev->dev.bus) { + if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + pr_info("%s: error in adding %s device to %s power" + "domain\n", __func__, dev_name(&pdev->dev), + pd->name); + } +} + +EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc"); +EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d"); +EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0"); +EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1"); +EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv"); +EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam"); +EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps"); + +static struct exynos_pm_domain *exynos4_pm_domains[] = { + &exynos4_pd_mfc, + &exynos4_pd_g3d, + &exynos4_pd_lcd0, + &exynos4_pd_lcd1, + &exynos4_pd_tv, + &exynos4_pd_cam, + &exynos4_pd_gps, +}; + +static __init int exynos4_pm_init_power_domain(void) +{ + int idx; + + if (of_have_populated_dt()) + return exynos_pm_dt_parse_domains(); + + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) + pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, + exynos4_pm_domains[idx]->is_off); + +#ifdef CONFIG_S5P_DEV_FIMD0 + exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); +#endif +#ifdef CONFIG_S5P_DEV_TV + exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv); + exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv); +#endif +#ifdef CONFIG_S5P_DEV_MFC + exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc); +#endif +#ifdef CONFIG_S5P_DEV_FIMC0 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_FIMC1 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_FIMC2 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_FIMC3 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_CSIS0 + exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_CSIS1 + exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam); +#endif + return 0; +} +arch_initcall(exynos4_pm_init_power_domain); + +static __init int exynos_pm_late_initcall(void) +{ + pm_genpd_poweroff_unused(); + return 0; +} +late_initcall(exynos_pm_late_initcall); diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a83cf51fc09..cccf91b8fae 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1043,6 +1043,8 @@ void __init sh7372_add_standard_devices(void) sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device); sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device); sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); + sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device); + sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device); } void __init sh7372_add_early_devices(void) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index f76623cbe26..5d56931a15b 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1234,8 +1234,7 @@ static int suspend(int vetoable) struct apm_user *as; dpm_suspend_start(PMSG_SUSPEND); - - dpm_suspend_noirq(PMSG_SUSPEND); + dpm_suspend_end(PMSG_SUSPEND); local_irq_disable(); syscore_suspend(); @@ -1259,9 +1258,9 @@ static int suspend(int vetoable) syscore_resume(); local_irq_enable(); - dpm_resume_noirq(PMSG_RESUME); - + dpm_resume_start(PMSG_RESUME); dpm_resume_end(PMSG_RESUME); + queue_event(APM_NORMAL_RESUME, NULL); spin_lock(&user_list_lock); for (as = user_list; as != NULL; as = as->next) { @@ -1277,7 +1276,7 @@ static void standby(void) { int err; - dpm_suspend_noirq(PMSG_SUSPEND); + dpm_suspend_end(PMSG_SUSPEND); local_irq_disable(); syscore_suspend(); @@ -1291,7 +1290,7 @@ static void standby(void) syscore_resume(); local_irq_enable(); - dpm_resume_noirq(PMSG_RESUME); + dpm_resume_start(PMSG_RESUME); } static apm_event_t get_event(void) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 978bbf7ac6a..73ce9fbe983 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -366,7 +366,7 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd) not_suspended = 0; list_for_each_entry(pdd, &genpd->dev_list, list_node) if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev) - || pdd->dev->power.irq_safe)) + || pdd->dev->power.irq_safe || to_gpd_data(pdd)->always_on)) not_suspended++; if (not_suspended > genpd->in_progress) @@ -503,6 +503,9 @@ static int pm_genpd_runtime_suspend(struct device *dev) might_sleep_if(!genpd->dev_irq_safe); + if (dev_gpd_data(dev)->always_on) + return -EBUSY; + stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL; if (stop_ok && !stop_ok(dev)) return -EBUSY; @@ -764,8 +767,10 @@ static int pm_genpd_prepare(struct device *dev) genpd_acquire_lock(genpd); - if (genpd->prepared_count++ == 0) + if (genpd->prepared_count++ == 0) { + genpd->suspended_count = 0; genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF; + } genpd_release_lock(genpd); @@ -820,17 +825,16 @@ static int pm_genpd_suspend(struct device *dev) } /** - * pm_genpd_suspend_noirq - Late suspend of a device from an I/O PM domain. + * pm_genpd_suspend_late - Late suspend of a device from an I/O PM domain. * @dev: Device to suspend. * * Carry out a late suspend of a device under the assumption that its * pm_domain field points to the domain member of an object of type * struct generic_pm_domain representing a PM domain consisting of I/O devices. */ -static int pm_genpd_suspend_noirq(struct device *dev) +static int pm_genpd_suspend_late(struct device *dev) { struct generic_pm_domain *genpd; - int ret; dev_dbg(dev, "%s()\n", __func__); @@ -838,14 +842,28 @@ static int pm_genpd_suspend_noirq(struct device *dev) if (IS_ERR(genpd)) return -EINVAL; - if (genpd->suspend_power_off) - return 0; + return genpd->suspend_power_off ? 0 : genpd_suspend_late(genpd, dev); +} - ret = genpd_suspend_late(genpd, dev); - if (ret) - return ret; +/** + * pm_genpd_suspend_noirq - Completion of suspend of device in an I/O PM domain. + * @dev: Device to suspend. + * + * Stop the device and remove power from the domain if all devices in it have + * been stopped. + */ +static int pm_genpd_suspend_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; - if (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)) + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + if (genpd->suspend_power_off || dev_gpd_data(dev)->always_on + || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev))) return 0; genpd_stop_dev(genpd, dev); @@ -862,13 +880,10 @@ static int pm_genpd_suspend_noirq(struct device *dev) } /** - * pm_genpd_resume_noirq - Early resume of a device from an I/O power domain. + * pm_genpd_resume_noirq - Start of resume of device in an I/O PM domain. * @dev: Device to resume. * - * Carry out an early resume of a device under the assumption that its - * pm_domain field points to the domain member of an object of type - * struct generic_pm_domain representing a power domain consisting of I/O - * devices. + * Restore power to the device's PM domain, if necessary, and start the device. */ static int pm_genpd_resume_noirq(struct device *dev) { @@ -880,7 +895,8 @@ static int pm_genpd_resume_noirq(struct device *dev) if (IS_ERR(genpd)) return -EINVAL; - if (genpd->suspend_power_off) + if (genpd->suspend_power_off || dev_gpd_data(dev)->always_on + || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev))) return 0; /* @@ -890,13 +906,34 @@ static int pm_genpd_resume_noirq(struct device *dev) */ pm_genpd_poweron(genpd); genpd->suspended_count--; - genpd_start_dev(genpd, dev); - return genpd_resume_early(genpd, dev); + return genpd_start_dev(genpd, dev); } /** - * pm_genpd_resume - Resume a device belonging to an I/O power domain. + * pm_genpd_resume_early - Early resume of a device in an I/O PM domain. + * @dev: Device to resume. + * + * Carry out an early resume of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a power domain consisting of I/O + * devices. + */ +static int pm_genpd_resume_early(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : genpd_resume_early(genpd, dev); +} + +/** + * pm_genpd_resume - Resume of device in an I/O PM domain. * @dev: Device to resume. * * Resume a device under the assumption that its pm_domain field points to the @@ -917,7 +954,7 @@ static int pm_genpd_resume(struct device *dev) } /** - * pm_genpd_freeze - Freeze a device belonging to an I/O power domain. + * pm_genpd_freeze - Freezing a device in an I/O PM domain. * @dev: Device to freeze. * * Freeze a device under the assumption that its pm_domain field points to the @@ -938,7 +975,29 @@ static int pm_genpd_freeze(struct device *dev) } /** - * pm_genpd_freeze_noirq - Late freeze of a device from an I/O power domain. + * pm_genpd_freeze_late - Late freeze of a device in an I/O PM domain. + * @dev: Device to freeze. + * + * Carry out a late freeze of a device under the assumption that its + * pm_domain field points to the domain member of an object of type + * struct generic_pm_domain representing a power domain consisting of I/O + * devices. + */ +static int pm_genpd_freeze_late(struct device *dev) +{ + struct generic_pm_domain *genpd; + + dev_dbg(dev, "%s()\n", __func__); + + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off ? 0 : genpd_freeze_late(genpd, dev); +} + +/** + * pm_genpd_freeze_noirq - Completion of freezing a device in an I/O PM domain. * @dev: Device to freeze. * * Carry out a late freeze of a device under the assumption that its @@ -949,7 +1008,6 @@ static int pm_genpd_freeze(struct device *dev) static int pm_genpd_freeze_noirq(struct device *dev) { struct generic_pm_domain *genpd; - int ret; dev_dbg(dev, "%s()\n", __func__); @@ -957,20 +1015,33 @@ static int pm_genpd_freeze_noirq(struct device *dev) if (IS_ERR(genpd)) return -EINVAL; - if (genpd->suspend_power_off) - return 0; + return genpd->suspend_power_off || dev_gpd_data(dev)->always_on ? + 0 : genpd_stop_dev(genpd, dev); +} - ret = genpd_freeze_late(genpd, dev); - if (ret) - return ret; +/** + * pm_genpd_thaw_noirq - Early thaw of device in an I/O PM domain. + * @dev: Device to thaw. + * + * Start the device, unless power has been removed from the domain already + * before the system transition. + */ +static int pm_genpd_thaw_noirq(struct device *dev) +{ + struct generic_pm_domain *genpd; - genpd_stop_dev(genpd, dev); + dev_dbg(dev, "%s()\n", __func__); - return 0; + genpd = dev_to_genpd(dev); + if (IS_ERR(genpd)) + return -EINVAL; + + return genpd->suspend_power_off || dev_gpd_data(dev)->always_on ? + 0 : genpd_start_dev(genpd, dev); } /** - * pm_genpd_thaw_noirq - Early thaw of a device from an I/O power domain. + * pm_genpd_thaw_early - Early thaw of device in an I/O PM domain. * @dev: Device to thaw. * * Carry out an early thaw of a device under the assumption that its @@ -978,7 +1049,7 @@ static int pm_genpd_freeze_noirq(struct device *dev) * struct generic_pm_domain representing a power domain consisting of I/O * devices. */ -static int pm_genpd_thaw_noirq(struct device *dev) +static int pm_genpd_thaw_early(struct device *dev) { struct generic_pm_domain *genpd; @@ -988,12 +1059,7 @@ static int pm_genpd_thaw_noirq(struct device *dev) if (IS_ERR(genpd)) return -EINVAL; - if (genpd->suspend_power_off) - return 0; - - genpd_start_dev(genpd, dev); - - return genpd_thaw_early(genpd, dev); + return genpd->suspend_power_off ? 0 : genpd_thaw_early(genpd, dev); } /** @@ -1018,13 +1084,11 @@ static int pm_genpd_thaw(struct device *dev) } /** - * pm_genpd_restore_noirq - Early restore of a device from an I/O power domain. + * pm_genpd_restore_noirq - Start of restore of device in an I/O PM domain. * @dev: Device to resume. * - * Carry out an early restore of a device under the assumption that its - * pm_domain field points to the domain member of an object of type - * struct generic_pm_domain representing a power domain consisting of I/O - * devices. + * Make sure the domain will be in the same power state as before the + * hibernation the system is resuming from and start the device if necessary. */ static int pm_genpd_restore_noirq(struct device *dev) { @@ -1040,23 +1104,35 @@ static int pm_genpd_restore_noirq(struct device *dev) * Since all of the "noirq" callbacks are executed sequentially, it is * guaranteed that this function will never run twice in parallel for * the same PM domain, so it is not necessary to use locking here. + * + * At this point suspended_count == 0 means we are being run for the + * first time for the given domain in the present cycle. */ - genpd->status = GPD_STATE_POWER_OFF; - if (genpd->suspend_power_off) { + if (genpd->suspended_count++ == 0) { /* - * The boot kernel might put the domain into the power on state, - * so make sure it really is powered off. + * The boot kernel might put the domain into arbitrary state, + * so make it appear as powered off to pm_genpd_poweron(), so + * that it tries to power it on in case it was really off. */ - if (genpd->power_off) - genpd->power_off(genpd); - return 0; + genpd->status = GPD_STATE_POWER_OFF; + if (genpd->suspend_power_off) { + /* + * If the domain was off before the hibernation, make + * sure it will be off going forward. + */ + if (genpd->power_off) + genpd->power_off(genpd); + + return 0; + } } + if (genpd->suspend_power_off) + return 0; + pm_genpd_poweron(genpd); - genpd->suspended_count--; - genpd_start_dev(genpd, dev); - return genpd_resume_early(genpd, dev); + return dev_gpd_data(dev)->always_on ? 0 : genpd_start_dev(genpd, dev); } /** @@ -1099,11 +1175,15 @@ static void pm_genpd_complete(struct device *dev) #define pm_genpd_prepare NULL #define pm_genpd_suspend NULL +#define pm_genpd_suspend_late NULL #define pm_genpd_suspend_noirq NULL +#define pm_genpd_resume_early NULL #define pm_genpd_resume_noirq NULL #define pm_genpd_resume NULL #define pm_genpd_freeze NULL +#define pm_genpd_freeze_late NULL #define pm_genpd_freeze_noirq NULL +#define pm_genpd_thaw_early NULL #define pm_genpd_thaw_noirq NULL #define pm_genpd_thaw NULL #define pm_genpd_restore_noirq NULL @@ -1171,6 +1251,38 @@ int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev, } /** + * __pm_genpd_of_add_device - Add a device to an I/O PM domain. + * @genpd_node: Device tree node pointer representing a PM domain to which the + * the device is added to. + * @dev: Device to be added. + * @td: Set of PM QoS timing parameters to attach to the device. + */ +int __pm_genpd_of_add_device(struct device_node *genpd_node, struct device *dev, + struct gpd_timing_data *td) +{ + struct generic_pm_domain *genpd = NULL, *gpd; + + dev_dbg(dev, "%s()\n", __func__); + + if (IS_ERR_OR_NULL(genpd_node) || IS_ERR_OR_NULL(dev)) + return -EINVAL; + + mutex_lock(&gpd_list_lock); + list_for_each_entry(gpd, &gpd_list, gpd_list_node) { + if (gpd->of_node == genpd_node) { + genpd = gpd; + break; + } + } + mutex_unlock(&gpd_list_lock); + + if (!genpd) + return -EINVAL; + + return __pm_genpd_add_device(genpd, dev, td); +} + +/** * pm_genpd_remove_device - Remove a device from an I/O PM domain. * @genpd: PM domain to remove the device from. * @dev: Device to be removed. @@ -1216,6 +1328,26 @@ int pm_genpd_remove_device(struct generic_pm_domain *genpd, } /** + * pm_genpd_dev_always_on - Set/unset the "always on" flag for a given device. + * @dev: Device to set/unset the flag for. + * @val: The new value of the device's "always on" flag. + */ +void pm_genpd_dev_always_on(struct device *dev, bool val) +{ + struct pm_subsys_data *psd; + unsigned long flags; + + spin_lock_irqsave(&dev->power.lock, flags); + + psd = dev_to_psd(dev); + if (psd && psd->domain_data) + to_gpd_data(psd->domain_data)->always_on = val; + + spin_unlock_irqrestore(&dev->power.lock, flags); +} +EXPORT_SYMBOL_GPL(pm_genpd_dev_always_on); + +/** * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain. * @genpd: Master PM domain to add the subdomain to. * @subdomain: Subdomain to be added. @@ -1450,7 +1582,7 @@ static int pm_genpd_default_suspend_late(struct device *dev) { int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.suspend_late; - return cb ? cb(dev) : pm_generic_suspend_noirq(dev); + return cb ? cb(dev) : pm_generic_suspend_late(dev); } /** @@ -1461,7 +1593,7 @@ static int pm_genpd_default_resume_early(struct device *dev) { int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.resume_early; - return cb ? cb(dev) : pm_generic_resume_noirq(dev); + return cb ? cb(dev) : pm_generic_resume_early(dev); } /** @@ -1494,7 +1626,7 @@ static int pm_genpd_default_freeze_late(struct device *dev) { int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.freeze_late; - return cb ? cb(dev) : pm_generic_freeze_noirq(dev); + return cb ? cb(dev) : pm_generic_freeze_late(dev); } /** @@ -1505,7 +1637,7 @@ static int pm_genpd_default_thaw_early(struct device *dev) { int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.thaw_early; - return cb ? cb(dev) : pm_generic_thaw_noirq(dev); + return cb ? cb(dev) : pm_generic_thaw_early(dev); } /** @@ -1557,23 +1689,28 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->poweroff_task = NULL; genpd->resume_count = 0; genpd->device_count = 0; - genpd->suspended_count = 0; genpd->max_off_time_ns = -1; genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; genpd->domain.ops.runtime_idle = pm_generic_runtime_idle; genpd->domain.ops.prepare = pm_genpd_prepare; genpd->domain.ops.suspend = pm_genpd_suspend; + genpd->domain.ops.suspend_late = pm_genpd_suspend_late; genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq; genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq; + genpd->domain.ops.resume_early = pm_genpd_resume_early; genpd->domain.ops.resume = pm_genpd_resume; genpd->domain.ops.freeze = pm_genpd_freeze; + genpd->domain.ops.freeze_late = pm_genpd_freeze_late; genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq; genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq; + genpd->domain.ops.thaw_early = pm_genpd_thaw_early; genpd->domain.ops.thaw = pm_genpd_thaw; genpd->domain.ops.poweroff = pm_genpd_suspend; + genpd->domain.ops.poweroff_late = pm_genpd_suspend_late; genpd->domain.ops.poweroff_noirq = pm_genpd_suspend_noirq; genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq; + genpd->domain.ops.restore_early = pm_genpd_resume_early; genpd->domain.ops.restore = pm_genpd_resume; genpd->domain.ops.complete = pm_genpd_complete; genpd->dev_ops.save_state = pm_genpd_default_save_state; diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c index 10bdd793f0b..d03d290f31c 100644 --- a/drivers/base/power/generic_ops.c +++ b/drivers/base/power/generic_ops.c @@ -92,59 +92,28 @@ int pm_generic_prepare(struct device *dev) } /** - * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback. - * @dev: Device to handle. - * @event: PM transition of the system under way. - * @bool: Whether or not this is the "noirq" stage. - * - * Execute the PM callback corresponding to @event provided by the driver of - * @dev, if defined, and return its error code. Return 0 if the callback is - * not present. + * pm_generic_suspend_noirq - Generic suspend_noirq callback for subsystems. + * @dev: Device to suspend. */ -static int __pm_generic_call(struct device *dev, int event, bool noirq) +int pm_generic_suspend_noirq(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - int (*callback)(struct device *); - - if (!pm) - return 0; - - switch (event) { - case PM_EVENT_SUSPEND: - callback = noirq ? pm->suspend_noirq : pm->suspend; - break; - case PM_EVENT_FREEZE: - callback = noirq ? pm->freeze_noirq : pm->freeze; - break; - case PM_EVENT_HIBERNATE: - callback = noirq ? pm->poweroff_noirq : pm->poweroff; - break; - case PM_EVENT_RESUME: - callback = noirq ? pm->resume_noirq : pm->resume; - break; - case PM_EVENT_THAW: - callback = noirq ? pm->thaw_noirq : pm->thaw; - break; - case PM_EVENT_RESTORE: - callback = noirq ? pm->restore_noirq : pm->restore; - break; - default: - callback = NULL; - break; - } - return callback ? callback(dev) : 0; + return pm && pm->suspend_noirq ? pm->suspend_noirq(dev) : 0; } +EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq); /** - * pm_generic_suspend_noirq - Generic suspend_noirq callback for subsystems. + * pm_generic_suspend_late - Generic suspend_late callback for subsystems. * @dev: Device to suspend. */ -int pm_generic_suspend_noirq(struct device *dev) +int pm_generic_suspend_late(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_SUSPEND, true); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->suspend_late ? pm->suspend_late(dev) : 0; } -EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq); +EXPORT_SYMBOL_GPL(pm_generic_suspend_late); /** * pm_generic_suspend - Generic suspend callback for subsystems. @@ -152,7 +121,9 @@ EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq); */ int pm_generic_suspend(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_SUSPEND, false); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->suspend ? pm->suspend(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_suspend); @@ -162,17 +133,33 @@ EXPORT_SYMBOL_GPL(pm_generic_suspend); */ int pm_generic_freeze_noirq(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_FREEZE, true); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->freeze_noirq ? pm->freeze_noirq(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_freeze_noirq); /** + * pm_generic_freeze_late - Generic freeze_late callback for subsystems. + * @dev: Device to freeze. + */ +int pm_generic_freeze_late(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->freeze_late ? pm->freeze_late(dev) : 0; +} +EXPORT_SYMBOL_GPL(pm_generic_freeze_late); + +/** * pm_generic_freeze - Generic freeze callback for subsystems. * @dev: Device to freeze. */ int pm_generic_freeze(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_FREEZE, false); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->freeze ? pm->freeze(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_freeze); @@ -182,17 +169,33 @@ EXPORT_SYMBOL_GPL(pm_generic_freeze); */ int pm_generic_poweroff_noirq(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_HIBERNATE, true); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->poweroff_noirq ? pm->poweroff_noirq(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_poweroff_noirq); /** + * pm_generic_poweroff_late - Generic poweroff_late callback for subsystems. + * @dev: Device to handle. + */ +int pm_generic_poweroff_late(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->poweroff_late ? pm->poweroff_late(dev) : 0; +} +EXPORT_SYMBOL_GPL(pm_generic_poweroff_late); + +/** * pm_generic_poweroff - Generic poweroff callback for subsystems. * @dev: Device to handle. */ int pm_generic_poweroff(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_HIBERNATE, false); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->poweroff ? pm->poweroff(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_poweroff); @@ -202,17 +205,33 @@ EXPORT_SYMBOL_GPL(pm_generic_poweroff); */ int pm_generic_thaw_noirq(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_THAW, true); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->thaw_noirq ? pm->thaw_noirq(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_thaw_noirq); /** + * pm_generic_thaw_early - Generic thaw_early callback for subsystems. + * @dev: Device to thaw. + */ +int pm_generic_thaw_early(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->thaw_early ? pm->thaw_early(dev) : 0; +} +EXPORT_SYMBOL_GPL(pm_generic_thaw_early); + +/** * pm_generic_thaw - Generic thaw callback for subsystems. * @dev: Device to thaw. */ int pm_generic_thaw(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_THAW, false); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->thaw ? pm->thaw(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_thaw); @@ -222,17 +241,33 @@ EXPORT_SYMBOL_GPL(pm_generic_thaw); */ int pm_generic_resume_noirq(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_RESUME, true); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->resume_noirq ? pm->resume_noirq(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_resume_noirq); /** + * pm_generic_resume_early - Generic resume_early callback for subsystems. + * @dev: Device to resume. + */ +int pm_generic_resume_early(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->resume_early ? pm->resume_early(dev) : 0; +} +EXPORT_SYMBOL_GPL(pm_generic_resume_early); + +/** * pm_generic_resume - Generic resume callback for subsystems. * @dev: Device to resume. */ int pm_generic_resume(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_RESUME, false); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->resume ? pm->resume(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_resume); @@ -242,17 +277,33 @@ EXPORT_SYMBOL_GPL(pm_generic_resume); */ int pm_generic_restore_noirq(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_RESTORE, true); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->restore_noirq ? pm->restore_noirq(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_restore_noirq); /** + * pm_generic_restore_early - Generic restore_early callback for subsystems. + * @dev: Device to resume. + */ +int pm_generic_restore_early(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->restore_early ? pm->restore_early(dev) : 0; +} +EXPORT_SYMBOL_GPL(pm_generic_restore_early); + +/** * pm_generic_restore - Generic restore callback for subsystems. * @dev: Device to restore. */ int pm_generic_restore(struct device *dev) { - return __pm_generic_call(dev, PM_EVENT_RESTORE, false); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + return pm && pm->restore ? pm->restore(dev) : 0; } EXPORT_SYMBOL_GPL(pm_generic_restore); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e2cc3d2e0ec..b462c0e341c 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -47,6 +47,7 @@ typedef int (*pm_callback_t)(struct device *); LIST_HEAD(dpm_list); LIST_HEAD(dpm_prepared_list); LIST_HEAD(dpm_suspended_list); +LIST_HEAD(dpm_late_early_list); LIST_HEAD(dpm_noirq_list); struct suspend_stats suspend_stats; @@ -246,6 +247,40 @@ static pm_callback_t pm_op(const struct dev_pm_ops *ops, pm_message_t state) } /** + * pm_late_early_op - Return the PM operation appropriate for given PM event. + * @ops: PM operations to choose from. + * @state: PM transition of the system being carried out. + * + * Runtime PM is disabled for @dev while this function is being executed. + */ +static pm_callback_t pm_late_early_op(const struct dev_pm_ops *ops, + pm_message_t state) +{ + switch (state.event) { +#ifdef CONFIG_SUSPEND + case PM_EVENT_SUSPEND: + return ops->suspend_late; + case PM_EVENT_RESUME: + return ops->resume_early; +#endif /* CONFIG_SUSPEND */ +#ifdef CONFIG_HIBERNATE_CALLBACKS + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + return ops->freeze_late; + case PM_EVENT_HIBERNATE: + return ops->poweroff_late; + case PM_EVENT_THAW: + case PM_EVENT_RECOVER: + return ops->thaw_early; + case PM_EVENT_RESTORE: + return ops->restore_early; +#endif /* CONFIG_HIBERNATE_CALLBACKS */ + } + + return NULL; +} + +/** * pm_noirq_op - Return the PM operation appropriate for given PM event. * @ops: PM operations to choose from. * @state: PM transition of the system being carried out. @@ -374,21 +409,21 @@ static int device_resume_noirq(struct device *dev, pm_message_t state) TRACE_RESUME(0); if (dev->pm_domain) { - info = "EARLY power domain "; + info = "noirq power domain "; callback = pm_noirq_op(&dev->pm_domain->ops, state); } else if (dev->type && dev->type->pm) { - info = "EARLY type "; + info = "noirq type "; callback = pm_noirq_op(dev->type->pm, state); } else if (dev->class && dev->class->pm) { - info = "EARLY class "; + info = "noirq class "; callback = pm_noirq_op(dev->class->pm, state); } else if (dev->bus && dev->bus->pm) { - info = "EARLY bus "; + info = "noirq bus "; callback = pm_noirq_op(dev->bus->pm, state); } if (!callback && dev->driver && dev->driver->pm) { - info = "EARLY driver "; + info = "noirq driver "; callback = pm_noirq_op(dev->driver->pm, state); } @@ -399,13 +434,13 @@ static int device_resume_noirq(struct device *dev, pm_message_t state) } /** - * dpm_resume_noirq - Execute "early resume" callbacks for non-sysdev devices. + * dpm_resume_noirq - Execute "noirq resume" callbacks for all devices. * @state: PM transition of the system being carried out. * - * Call the "noirq" resume handlers for all devices marked as DPM_OFF_IRQ and + * Call the "noirq" resume handlers for all devices in dpm_noirq_list and * enable device drivers to receive interrupts. */ -void dpm_resume_noirq(pm_message_t state) +static void dpm_resume_noirq(pm_message_t state) { ktime_t starttime = ktime_get(); @@ -415,7 +450,7 @@ void dpm_resume_noirq(pm_message_t state) int error; get_device(dev); - list_move_tail(&dev->power.entry, &dpm_suspended_list); + list_move_tail(&dev->power.entry, &dpm_late_early_list); mutex_unlock(&dpm_list_mtx); error = device_resume_noirq(dev, state); @@ -423,6 +458,80 @@ void dpm_resume_noirq(pm_message_t state) suspend_stats.failed_resume_noirq++; dpm_save_failed_step(SUSPEND_RESUME_NOIRQ); dpm_save_failed_dev(dev_name(dev)); + pm_dev_err(dev, state, " noirq", error); + } + + mutex_lock(&dpm_list_mtx); + put_device(dev); + } + mutex_unlock(&dpm_list_mtx); + dpm_show_time(starttime, state, "noirq"); + resume_device_irqs(); +} + +/** + * device_resume_early - Execute an "early resume" callback for given device. + * @dev: Device to handle. + * @state: PM transition of the system being carried out. + * + * Runtime PM is disabled for @dev while this function is being executed. + */ +static int device_resume_early(struct device *dev, pm_message_t state) +{ + pm_callback_t callback = NULL; + char *info = NULL; + int error = 0; + + TRACE_DEVICE(dev); + TRACE_RESUME(0); + + if (dev->pm_domain) { + info = "early power domain "; + callback = pm_late_early_op(&dev->pm_domain->ops, state); + } else if (dev->type && dev->type->pm) { + info = "early type "; + callback = pm_late_early_op(dev->type->pm, state); + } else if (dev->class && dev->class->pm) { + info = "early class "; + callback = pm_late_early_op(dev->class->pm, state); + } else if (dev->bus && dev->bus->pm) { + info = "early bus "; + callback = pm_late_early_op(dev->bus->pm, state); + } + + if (!callback && dev->driver && dev->driver->pm) { + info = "early driver "; + callback = pm_late_early_op(dev->driver->pm, state); + } + + error = dpm_run_callback(callback, dev, state, info); + + TRACE_RESUME(error); + return error; +} + +/** + * dpm_resume_early - Execute "early resume" callbacks for all devices. + * @state: PM transition of the system being carried out. + */ +static void dpm_resume_early(pm_message_t state) +{ + ktime_t starttime = ktime_get(); + + mutex_lock(&dpm_list_mtx); + while (!list_empty(&dpm_late_early_list)) { + struct device *dev = to_device(dpm_late_early_list.next); + int error; + + get_device(dev); + list_move_tail(&dev->power.entry, &dpm_suspended_list); + mutex_unlock(&dpm_list_mtx); + + error = device_resume_early(dev, state); + if (error) { + suspend_stats.failed_resume_early++; + dpm_save_failed_step(SUSPEND_RESUME_EARLY); + dpm_save_failed_dev(dev_name(dev)); pm_dev_err(dev, state, " early", error); } @@ -431,9 +540,18 @@ void dpm_resume_noirq(pm_message_t state) } mutex_unlock(&dpm_list_mtx); dpm_show_time(starttime, state, "early"); - resume_device_irqs(); } -EXPORT_SYMBOL_GPL(dpm_resume_noirq); + +/** + * dpm_resume_start - Execute "noirq" and "early" device callbacks. + * @state: PM transition of the system being carried out. + */ +void dpm_resume_start(pm_message_t state) +{ + dpm_resume_noirq(state); + dpm_resume_early(state); +} +EXPORT_SYMBOL_GPL(dpm_resume_start); /** * device_resume - Execute "resume" callbacks for given device. @@ -716,21 +834,21 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state) char *info = NULL; if (dev->pm_domain) { - info = "LATE power domain "; + info = "noirq power domain "; callback = pm_noirq_op(&dev->pm_domain->ops, state); } else if (dev->type && dev->type->pm) { - info = "LATE type "; + info = "noirq type "; callback = pm_noirq_op(dev->type->pm, state); } else if (dev->class && dev->class->pm) { - info = "LATE class "; + info = "noirq class "; callback = pm_noirq_op(dev->class->pm, state); } else if (dev->bus && dev->bus->pm) { - info = "LATE bus "; + info = "noirq bus "; callback = pm_noirq_op(dev->bus->pm, state); } if (!callback && dev->driver && dev->driver->pm) { - info = "LATE driver "; + info = "noirq driver "; callback = pm_noirq_op(dev->driver->pm, state); } @@ -738,21 +856,21 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state) } /** - * dpm_suspend_noirq - Execute "late suspend" callbacks for non-sysdev devices. + * dpm_suspend_noirq - Execute "noirq suspend" callbacks for all devices. * @state: PM transition of the system being carried out. * * Prevent device drivers from receiving interrupts and call the "noirq" suspend * handlers for all non-sysdev devices. */ -int dpm_suspend_noirq(pm_message_t state) +static int dpm_suspend_noirq(pm_message_t state) { ktime_t starttime = ktime_get(); int error = 0; suspend_device_irqs(); mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_suspended_list)) { - struct device *dev = to_device(dpm_suspended_list.prev); + while (!list_empty(&dpm_late_early_list)) { + struct device *dev = to_device(dpm_late_early_list.prev); get_device(dev); mutex_unlock(&dpm_list_mtx); @@ -761,7 +879,7 @@ int dpm_suspend_noirq(pm_message_t state) mutex_lock(&dpm_list_mtx); if (error) { - pm_dev_err(dev, state, " late", error); + pm_dev_err(dev, state, " noirq", error); suspend_stats.failed_suspend_noirq++; dpm_save_failed_step(SUSPEND_SUSPEND_NOIRQ); dpm_save_failed_dev(dev_name(dev)); @@ -776,10 +894,95 @@ int dpm_suspend_noirq(pm_message_t state) if (error) dpm_resume_noirq(resume_event(state)); else + dpm_show_time(starttime, state, "noirq"); + return error; +} + +/** + * device_suspend_late - Execute a "late suspend" callback for given device. + * @dev: Device to handle. + * @state: PM transition of the system being carried out. + * + * Runtime PM is disabled for @dev while this function is being executed. + */ +static int device_suspend_late(struct device *dev, pm_message_t state) +{ + pm_callback_t callback = NULL; + char *info = NULL; + + if (dev->pm_domain) { + info = "late power domain "; + callback = pm_late_early_op(&dev->pm_domain->ops, state); + } else if (dev->type && dev->type->pm) { + info = "late type "; + callback = pm_late_early_op(dev->type->pm, state); + } else if (dev->class && dev->class->pm) { + info = "late class "; + callback = pm_late_early_op(dev->class->pm, state); + } else if (dev->bus && dev->bus->pm) { + info = "late bus "; + callback = pm_late_early_op(dev->bus->pm, state); + } + + if (!callback && dev->driver && dev->driver->pm) { + info = "late driver "; + callback = pm_late_early_op(dev->driver->pm, state); + } + + return dpm_run_callback(callback, dev, state, info); +} + +/** + * dpm_suspend_late - Execute "late suspend" callbacks for all devices. + * @state: PM transition of the system being carried out. + */ +static int dpm_suspend_late(pm_message_t state) +{ + ktime_t starttime = ktime_get(); + int error = 0; + + mutex_lock(&dpm_list_mtx); + while (!list_empty(&dpm_suspended_list)) { + struct device *dev = to_device(dpm_suspended_list.prev); + + get_device(dev); + mutex_unlock(&dpm_list_mtx); + + error = device_suspend_late(dev, state); + + mutex_lock(&dpm_list_mtx); + if (error) { + pm_dev_err(dev, state, " late", error); + suspend_stats.failed_suspend_late++; + dpm_save_failed_step(SUSPEND_SUSPEND_LATE); + dpm_save_failed_dev(dev_name(dev)); + put_device(dev); + break; + } + if (!list_empty(&dev->power.entry)) + list_move(&dev->power.entry, &dpm_late_early_list); + put_device(dev); + } + mutex_unlock(&dpm_list_mtx); + if (error) + dpm_resume_early(resume_event(state)); + else dpm_show_time(starttime, state, "late"); + return error; } -EXPORT_SYMBOL_GPL(dpm_suspend_noirq); + +/** + * dpm_suspend_end - Execute "late" and "noirq" device suspend callbacks. + * @state: PM transition of the system being carried out. + */ +int dpm_suspend_end(pm_message_t state) +{ + int error = dpm_suspend_late(state); + + return error ? : dpm_suspend_noirq(state); +} +EXPORT_SYMBOL_GPL(dpm_suspend_end); /** * legacy_suspend - Execute a legacy (bus or class) suspend callback for device. diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 9bf62323aaf..eeb4bff9505 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -71,6 +71,8 @@ extern void dpm_sysfs_remove(struct device *dev); extern void rpm_sysfs_remove(struct device *dev); extern int wakeup_sysfs_add(struct device *dev); extern void wakeup_sysfs_remove(struct device *dev); +extern int pm_qos_sysfs_add(struct device *dev); +extern void pm_qos_sysfs_remove(struct device *dev); #else /* CONFIG_PM */ @@ -79,5 +81,7 @@ static inline void dpm_sysfs_remove(struct device *dev) {} static inline void rpm_sysfs_remove(struct device *dev) {} static inline int wakeup_sysfs_add(struct device *dev) { return 0; } static inline void wakeup_sysfs_remove(struct device *dev) {} +static inline int pm_qos_sysfs_add(struct device *dev) { return 0; } +static inline void pm_qos_sysfs_remove(struct device *dev) {} #endif diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index c5d35883746..71855570922 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -41,6 +41,7 @@ #include <linux/mutex.h> #include <linux/export.h> +#include "power.h" static DEFINE_MUTEX(dev_pm_qos_mtx); @@ -166,6 +167,12 @@ void dev_pm_qos_constraints_destroy(struct device *dev) struct dev_pm_qos_request *req, *tmp; struct pm_qos_constraints *c; + /* + * If the device's PM QoS resume latency limit has been exposed to user + * space, it has to be hidden at this point. + */ + dev_pm_qos_hide_latency_limit(dev); + mutex_lock(&dev_pm_qos_mtx); dev->power.power_state = PMSG_INVALID; @@ -445,3 +452,57 @@ int dev_pm_qos_add_ancestor_request(struct device *dev, return error; } EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request); + +#ifdef CONFIG_PM_RUNTIME +static void __dev_pm_qos_drop_user_request(struct device *dev) +{ + dev_pm_qos_remove_request(dev->power.pq_req); + dev->power.pq_req = 0; +} + +/** + * dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space. + * @dev: Device whose PM QoS latency limit is to be exposed to user space. + * @value: Initial value of the latency limit. + */ +int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) +{ + struct dev_pm_qos_request *req; + int ret; + + if (!device_is_registered(dev) || value < 0) + return -EINVAL; + + if (dev->power.pq_req) + return -EEXIST; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + + ret = dev_pm_qos_add_request(dev, req, value); + if (ret < 0) + return ret; + + dev->power.pq_req = req; + ret = pm_qos_sysfs_add(dev); + if (ret) + __dev_pm_qos_drop_user_request(dev); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit); + +/** + * dev_pm_qos_hide_latency_limit - Hide PM QoS latency limit from user space. + * @dev: Device whose PM QoS latency limit is to be hidden from user space. + */ +void dev_pm_qos_hide_latency_limit(struct device *dev) +{ + if (dev->power.pq_req) { + pm_qos_sysfs_remove(dev); + __dev_pm_qos_drop_user_request(dev); + } +} +EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit); +#endif /* CONFIG_PM_RUNTIME */ diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index adf41be0ea6..95c12f6cb5b 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -5,6 +5,7 @@ #include <linux/device.h> #include <linux/string.h> #include <linux/export.h> +#include <linux/pm_qos.h> #include <linux/pm_runtime.h> #include <linux/atomic.h> #include <linux/jiffies.h> @@ -217,6 +218,31 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev, static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, autosuspend_delay_ms_store); +static ssize_t pm_qos_latency_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", dev->power.pq_req->node.prio); +} + +static ssize_t pm_qos_latency_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t n) +{ + s32 value; + int ret; + + if (kstrtos32(buf, 0, &value)) + return -EINVAL; + + if (value < 0) + return -EINVAL; + + ret = dev_pm_qos_update_request(dev->power.pq_req, value); + return ret < 0 ? ret : n; +} + +static DEVICE_ATTR(pm_qos_resume_latency_us, 0644, + pm_qos_latency_show, pm_qos_latency_store); #endif /* CONFIG_PM_RUNTIME */ #ifdef CONFIG_PM_SLEEP @@ -490,6 +516,17 @@ static struct attribute_group pm_runtime_attr_group = { .attrs = runtime_attrs, }; +static struct attribute *pm_qos_attrs[] = { +#ifdef CONFIG_PM_RUNTIME + &dev_attr_pm_qos_resume_latency_us.attr, +#endif /* CONFIG_PM_RUNTIME */ + NULL, +}; +static struct attribute_group pm_qos_attr_group = { + .name = power_group_name, + .attrs = pm_qos_attrs, +}; + int dpm_sysfs_add(struct device *dev) { int rc; @@ -530,6 +567,16 @@ void wakeup_sysfs_remove(struct device *dev) sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); } +int pm_qos_sysfs_add(struct device *dev) +{ + return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group); +} + +void pm_qos_sysfs_remove(struct device *dev) +{ + sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group); +} + void rpm_sysfs_remove(struct device *dev) { sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group); diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index caf995fb774..2a3e581b8dc 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -53,6 +53,23 @@ static void pm_wakeup_timer_fn(unsigned long data); static LIST_HEAD(wakeup_sources); /** + * wakeup_source_prepare - Prepare a new wakeup source for initialization. + * @ws: Wakeup source to prepare. + * @name: Pointer to the name of the new wakeup source. + * + * Callers must ensure that the @name string won't be freed when @ws is still in + * use. + */ +void wakeup_source_prepare(struct wakeup_source *ws, const char *name) +{ + if (ws) { + memset(ws, 0, sizeof(*ws)); + ws->name = name; + } +} +EXPORT_SYMBOL_GPL(wakeup_source_prepare); + +/** * wakeup_source_create - Create a struct wakeup_source object. * @name: Name of the new wakeup source. */ @@ -60,37 +77,44 @@ struct wakeup_source *wakeup_source_create(const char *name) { struct wakeup_source *ws; - ws = kzalloc(sizeof(*ws), GFP_KERNEL); + ws = kmalloc(sizeof(*ws), GFP_KERNEL); if (!ws) return NULL; - spin_lock_init(&ws->lock); - if (name) - ws->name = kstrdup(name, GFP_KERNEL); - + wakeup_source_prepare(ws, name ? kstrdup(name, GFP_KERNEL) : NULL); return ws; } EXPORT_SYMBOL_GPL(wakeup_source_create); /** + * wakeup_source_drop - Prepare a struct wakeup_source object for destruction. + * @ws: Wakeup source to prepare for destruction. + * + * Callers must ensure that __pm_stay_awake() or __pm_wakeup_event() will never + * be run in parallel with this function for the same wakeup source object. + */ +void wakeup_source_drop(struct wakeup_source *ws) +{ + if (!ws) + return; + + del_timer_sync(&ws->timer); + __pm_relax(ws); +} +EXPORT_SYMBOL_GPL(wakeup_source_drop); + +/** * wakeup_source_destroy - Destroy a struct wakeup_source object. * @ws: Wakeup source to destroy. + * + * Use only for wakeup source objects created with wakeup_source_create(). */ void wakeup_source_destroy(struct wakeup_source *ws) { if (!ws) return; - spin_lock_irq(&ws->lock); - while (ws->active) { - spin_unlock_irq(&ws->lock); - - schedule_timeout_interruptible(msecs_to_jiffies(TIMEOUT)); - - spin_lock_irq(&ws->lock); - } - spin_unlock_irq(&ws->lock); - + wakeup_source_drop(ws); kfree(ws->name); kfree(ws); } @@ -105,6 +129,7 @@ void wakeup_source_add(struct wakeup_source *ws) if (WARN_ON(!ws)) return; + spin_lock_init(&ws->lock); setup_timer(&ws->timer, pm_wakeup_timer_fn, (unsigned long)ws); ws->active = false; @@ -152,8 +177,10 @@ EXPORT_SYMBOL_GPL(wakeup_source_register); */ void wakeup_source_unregister(struct wakeup_source *ws) { - wakeup_source_remove(ws); - wakeup_source_destroy(ws); + if (ws) { + wakeup_source_remove(ws); + wakeup_source_destroy(ws); + } } EXPORT_SYMBOL_GPL(wakeup_source_unregister); @@ -349,7 +376,6 @@ static void wakeup_source_activate(struct wakeup_source *ws) { ws->active = true; ws->active_count++; - ws->timer_expires = jiffies; ws->last_time = ktime_get(); /* Increment the counter of events in progress. */ @@ -370,9 +396,14 @@ void __pm_stay_awake(struct wakeup_source *ws) return; spin_lock_irqsave(&ws->lock, flags); + ws->event_count++; if (!ws->active) wakeup_source_activate(ws); + + del_timer(&ws->timer); + ws->timer_expires = 0; + spin_unlock_irqrestore(&ws->lock, flags); } EXPORT_SYMBOL_GPL(__pm_stay_awake); @@ -438,6 +469,7 @@ static void wakeup_source_deactivate(struct wakeup_source *ws) ws->max_time = duration; del_timer(&ws->timer); + ws->timer_expires = 0; /* * Increment the counter of registered wakeup events and decrement the @@ -492,11 +524,22 @@ EXPORT_SYMBOL_GPL(pm_relax); * pm_wakeup_timer_fn - Delayed finalization of a wakeup event. * @data: Address of the wakeup source object associated with the event source. * - * Call __pm_relax() for the wakeup source whose address is stored in @data. + * Call wakeup_source_deactivate() for the wakeup source whose address is stored + * in @data if it is currently active and its timer has not been canceled and + * the expiration time of the timer is not in future. */ static void pm_wakeup_timer_fn(unsigned long data) { - __pm_relax((struct wakeup_source *)data); + struct wakeup_source *ws = (struct wakeup_source *)data; + unsigned long flags; + + spin_lock_irqsave(&ws->lock, flags); + + if (ws->active && ws->timer_expires + && time_after_eq(jiffies, ws->timer_expires)) + wakeup_source_deactivate(ws); + + spin_unlock_irqrestore(&ws->lock, flags); } /** @@ -534,7 +577,7 @@ void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec) if (!expires) expires = 1; - if (time_after(expires, ws->timer_expires)) { + if (!ws->timer_expires || time_after(expires, ws->timer_expires)) { mod_timer(&ws->timer, expires); ws->timer_expires = expires; } diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index ca09bc421dd..32fe9ef5cc5 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -32,6 +32,7 @@ #include <linux/sh_timer.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/pm_domain.h> struct sh_cmt_priv { void __iomem *mapbase; @@ -689,6 +690,9 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) struct sh_cmt_priv *p = platform_get_drvdata(pdev); int ret; + if (!is_early_platform_device(pdev)) + pm_genpd_dev_always_on(&pdev->dev, true); + if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); return 0; diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index db8d5955bad..a2172f69041 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -31,6 +31,7 @@ #include <linux/sh_timer.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/pm_domain.h> struct sh_mtu2_priv { void __iomem *mapbase; @@ -306,6 +307,9 @@ static int __devinit sh_mtu2_probe(struct platform_device *pdev) struct sh_mtu2_priv *p = platform_get_drvdata(pdev); int ret; + if (!is_early_platform_device(pdev)) + pm_genpd_dev_always_on(&pdev->dev, true); + if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); return 0; diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 079e96ad44e..97f54b634be 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -32,6 +32,7 @@ #include <linux/sh_timer.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/pm_domain.h> struct sh_tmu_priv { void __iomem *mapbase; @@ -410,6 +411,9 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) struct sh_tmu_priv *p = platform_get_drvdata(pdev); int ret; + if (!is_early_platform_device(pdev)) + pm_genpd_dev_always_on(&pdev->dev, true); + if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); return 0; diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index c189b82f5ec..70c31d43fff 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -83,6 +83,7 @@ int update_devfreq(struct devfreq *devfreq) { unsigned long freq; int err = 0; + u32 flags = 0; if (!mutex_is_locked(&devfreq->lock)) { WARN(true, "devfreq->lock must be locked by the caller.\n"); @@ -94,7 +95,24 @@ int update_devfreq(struct devfreq *devfreq) if (err) return err; - err = devfreq->profile->target(devfreq->dev.parent, &freq); + /* + * Adjust the freuqency with user freq and QoS. + * + * List from the highest proiority + * max_freq (probably called by thermal when it's too hot) + * min_freq + */ + + if (devfreq->min_freq && freq < devfreq->min_freq) { + freq = devfreq->min_freq; + flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */ + } + if (devfreq->max_freq && freq > devfreq->max_freq) { + freq = devfreq->max_freq; + flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */ + } + + err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); if (err) return err; @@ -501,12 +519,82 @@ static ssize_t show_central_polling(struct device *dev, !to_devfreq(dev)->governor->no_central_polling); } +static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct devfreq *df = to_devfreq(dev); + unsigned long value; + int ret; + unsigned long max; + + ret = sscanf(buf, "%lu", &value); + if (ret != 1) + goto out; + + mutex_lock(&df->lock); + max = df->max_freq; + if (value && max && value > max) { + ret = -EINVAL; + goto unlock; + } + + df->min_freq = value; + update_devfreq(df); + ret = count; +unlock: + mutex_unlock(&df->lock); +out: + return ret; +} + +static ssize_t show_min_freq(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%lu\n", to_devfreq(dev)->min_freq); +} + +static ssize_t store_max_freq(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct devfreq *df = to_devfreq(dev); + unsigned long value; + int ret; + unsigned long min; + + ret = sscanf(buf, "%lu", &value); + if (ret != 1) + goto out; + + mutex_lock(&df->lock); + min = df->min_freq; + if (value && min && value < min) { + ret = -EINVAL; + goto unlock; + } + + df->max_freq = value; + update_devfreq(df); + ret = count; +unlock: + mutex_unlock(&df->lock); +out: + return ret; +} + +static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq); +} + static struct device_attribute devfreq_attrs[] = { __ATTR(governor, S_IRUGO, show_governor, NULL), __ATTR(cur_freq, S_IRUGO, show_freq, NULL), __ATTR(central_polling, S_IRUGO, show_central_polling, NULL), __ATTR(polling_interval, S_IRUGO | S_IWUSR, show_polling_interval, store_polling_interval), + __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq), + __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq), { }, }; @@ -555,14 +643,30 @@ module_exit(devfreq_exit); * freq value given to target callback. * @dev The devfreq user device. (parent of devfreq) * @freq The frequency given to target function + * @flags Flags handed from devfreq framework. * */ -struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq) +struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, + u32 flags) { - struct opp *opp = opp_find_freq_ceil(dev, freq); + struct opp *opp; - if (opp == ERR_PTR(-ENODEV)) + if (flags & DEVFREQ_FLAG_LEAST_UPPER_BOUND) { + /* The freq is an upper bound. opp should be lower */ opp = opp_find_freq_floor(dev, freq); + + /* If not available, use the closest opp */ + if (opp == ERR_PTR(-ENODEV)) + opp = opp_find_freq_ceil(dev, freq); + } else { + /* The freq is an lower bound. opp should be higher */ + opp = opp_find_freq_ceil(dev, freq); + + /* If not available, use the closest opp */ + if (opp == ERR_PTR(-ENODEV)) + opp = opp_find_freq_floor(dev, freq); + } + return opp; } diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 6460577d670..1a361e99965 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -619,15 +619,19 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, return err; } -static int exynos4_bus_target(struct device *dev, unsigned long *_freq) +static int exynos4_bus_target(struct device *dev, unsigned long *_freq, + u32 flags) { int err = 0; struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp = devfreq_recommended_opp(dev, _freq); - unsigned long old_freq = opp_get_freq(data->curr_opp); + struct opp *opp = devfreq_recommended_opp(dev, _freq, flags); unsigned long freq = opp_get_freq(opp); + unsigned long old_freq = opp_get_freq(data->curr_opp); + + if (IS_ERR(opp)) + return PTR_ERR(opp); if (old_freq == freq) return 0; @@ -689,9 +693,7 @@ static int exynos4_get_busier_dmc(struct busfreq_data *data) static int exynos4_bus_get_dev_status(struct device *dev, struct devfreq_dev_status *stat) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); + struct busfreq_data *data = dev_get_drvdata(dev); int busier_dmc; int cycles_x2 = 2; /* 2 x cycles */ void __iomem *addr; @@ -739,9 +741,7 @@ static int exynos4_bus_get_dev_status(struct device *dev, static void exynos4_bus_exit(struct device *dev) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); + struct busfreq_data *data = dev_get_drvdata(dev); devfreq_unregister_opp_notifier(dev, data->devfreq); } @@ -1087,9 +1087,7 @@ static __devexit int exynos4_busfreq_remove(struct platform_device *pdev) static int exynos4_busfreq_resume(struct device *dev) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); + struct busfreq_data *data = dev_get_drvdata(dev); busfreq_mon_reset(data); return 0; @@ -1132,4 +1130,3 @@ module_exit(exynos4_busfreq_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); -MODULE_ALIAS("exynos4-busfreq"); diff --git a/drivers/devfreq/governor_performance.c b/drivers/devfreq/governor_performance.c index c0596b29176..574a06b1b1d 100644 --- a/drivers/devfreq/governor_performance.c +++ b/drivers/devfreq/governor_performance.c @@ -18,7 +18,10 @@ static int devfreq_performance_func(struct devfreq *df, * target callback should be able to get floor value as * said in devfreq.h */ - *freq = UINT_MAX; + if (!df->max_freq) + *freq = UINT_MAX; + else + *freq = df->max_freq; return 0; } diff --git a/drivers/devfreq/governor_powersave.c b/drivers/devfreq/governor_powersave.c index 2483a85a266..d742d4a82d6 100644 --- a/drivers/devfreq/governor_powersave.c +++ b/drivers/devfreq/governor_powersave.c @@ -18,7 +18,7 @@ static int devfreq_powersave_func(struct devfreq *df, * target callback should be able to get ceiling value as * said in devfreq.h */ - *freq = 0; + *freq = df->min_freq; return 0; } diff --git a/drivers/devfreq/governor_simpleondemand.c b/drivers/devfreq/governor_simpleondemand.c index efad8dcf902..a2e3eae7901 100644 --- a/drivers/devfreq/governor_simpleondemand.c +++ b/drivers/devfreq/governor_simpleondemand.c @@ -25,6 +25,7 @@ static int devfreq_simple_ondemand_func(struct devfreq *df, unsigned int dfso_upthreshold = DFSO_UPTHRESHOLD; unsigned int dfso_downdifferential = DFSO_DOWNDIFFERENCTIAL; struct devfreq_simple_ondemand_data *data = df->data; + unsigned long max = (df->max_freq) ? df->max_freq : UINT_MAX; if (err) return err; @@ -41,7 +42,7 @@ static int devfreq_simple_ondemand_func(struct devfreq *df, /* Assume MAX if it is going to be divided by zero */ if (stat.total_time == 0) { - *freq = UINT_MAX; + *freq = max; return 0; } @@ -54,13 +55,13 @@ static int devfreq_simple_ondemand_func(struct devfreq *df, /* Set MAX if it's busy enough */ if (stat.busy_time * 100 > stat.total_time * dfso_upthreshold) { - *freq = UINT_MAX; + *freq = max; return 0; } /* Set MAX if we do not know the initial frequency */ if (stat.current_frequency == 0) { - *freq = UINT_MAX; + *freq = max; return 0; } @@ -79,6 +80,11 @@ static int devfreq_simple_ondemand_func(struct devfreq *df, b = div_u64(b, (dfso_upthreshold - dfso_downdifferential / 2)); *freq = (unsigned long) b; + if (df->min_freq && *freq < df->min_freq) + *freq = df->min_freq; + if (df->max_freq && *freq > df->max_freq) + *freq = df->max_freq; + return 0; } diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c index 4f8b563da78..0681246fc89 100644 --- a/drivers/devfreq/governor_userspace.c +++ b/drivers/devfreq/governor_userspace.c @@ -25,10 +25,19 @@ static int devfreq_userspace_func(struct devfreq *df, unsigned long *freq) { struct userspace_data *data = df->data; - if (!data->valid) + if (data->valid) { + unsigned long adjusted_freq = data->user_frequency; + + if (df->max_freq && adjusted_freq > df->max_freq) + adjusted_freq = df->max_freq; + + if (df->min_freq && adjusted_freq < df->min_freq) + adjusted_freq = df->min_freq; + + *freq = adjusted_freq; + } else { *freq = df->previous_freq; /* No user freq specified yet */ - else - *freq = data->user_frequency; + } return 0; } diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 352d4797865..75a48544879 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -56,6 +56,7 @@ #include <linux/mmc/sh_mmcif.h> #include <linux/pagemap.h> #include <linux/platform_device.h> +#include <linux/pm_qos.h> #include <linux/pm_runtime.h> #include <linux/spinlock.h> #include <linux/module.h> @@ -1346,6 +1347,8 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev) if (ret < 0) goto clean_up5; + dev_pm_qos_expose_latency_limit(&pdev->dev, 100); + dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION); dev_dbg(&pdev->dev, "chip ver H'%04x\n", sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff); @@ -1376,6 +1379,8 @@ static int __devexit sh_mmcif_remove(struct platform_device *pdev) host->dying = true; pm_runtime_get_sync(&pdev->dev); + dev_pm_qos_hide_latency_limit(&pdev->dev); + mmc_remove_host(host->mmc); sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 5f9ad74fbf8..e21988901c3 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -39,6 +39,7 @@ #include <linux/module.h> #include <linux/pagemap.h> #include <linux/platform_device.h> +#include <linux/pm_qos.h> #include <linux/pm_runtime.h> #include <linux/scatterlist.h> #include <linux/spinlock.h> @@ -955,6 +956,8 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, mmc_add_host(mmc); + dev_pm_qos_expose_latency_limit(&pdev->dev, 100); + /* Unmask the IRQs we want to know about */ if (!_host->chan_rx) irq_mask |= TMIO_MASK_READOP; @@ -993,6 +996,8 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host) || host->mmc->caps & MMC_CAP_NONREMOVABLE) pm_runtime_get_sync(&pdev->dev); + dev_pm_qos_hide_latency_limit(&pdev->dev); + mmc_remove_host(host->mmc); cancel_work_sync(&host->done); cancel_delayed_work_sync(&host->delayed_reset_work); diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index ce4fa083186..9e14ae6cd49 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -129,9 +129,9 @@ static void do_suspend(void) printk(KERN_DEBUG "suspending xenstore...\n"); xs_suspend(); - err = dpm_suspend_noirq(PMSG_FREEZE); + err = dpm_suspend_end(PMSG_FREEZE); if (err) { - printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err); + printk(KERN_ERR "dpm_suspend_end failed: %d\n", err); goto out_resume; } @@ -149,7 +149,7 @@ static void do_suspend(void) err = stop_machine(xen_suspend, &si, cpumask_of(0)); - dpm_resume_noirq(si.cancelled ? PMSG_THAW : PMSG_RESTORE); + dpm_resume_start(si.cancelled ? PMSG_THAW : PMSG_RESTORE); if (err) { printk(KERN_ERR "failed to start xen_suspend: %d\n", err); diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index e49e81bb80e..0971e921780 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -129,6 +129,8 @@ static int kjournald(void *arg) setup_timer(&journal->j_commit_timer, commit_timeout, (unsigned long)current); + set_freezable(); + /* Record that the journal thread is running */ journal->j_task = current; wake_up(&journal->j_wait_done_commit); diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 5ff8940b8f0..839377e3d62 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -139,6 +139,8 @@ static int kjournald2(void *arg) setup_timer(&journal->j_commit_timer, commit_timeout, (unsigned long)current); + set_freezable(); + /* Record that the journal thread is running */ journal->j_task = current; wake_up(&journal->j_wait_done_commit); diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 98ce8124b1c..281c72a3b9d 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -44,6 +44,14 @@ struct devfreq_dev_status { void *private_data; }; +/* + * The resulting frequency should be at most this. (this bound is the + * least upper bound; thus, the resulting freq should be lower or same) + * If the flag is not set, the resulting frequency should be at most the + * bound (greatest lower bound) + */ +#define DEVFREQ_FLAG_LEAST_UPPER_BOUND 0x1 + /** * struct devfreq_dev_profile - Devfreq's user device profile * @initial_freq The operating frequency when devfreq_add_device() is @@ -54,6 +62,8 @@ struct devfreq_dev_status { * higher than any operable frequency, set maximum. * Before returning, target function should set * freq at the current frequency. + * The "flags" parameter's possible values are + * explained above with "DEVFREQ_FLAG_*" macros. * @get_dev_status The device should provide the current performance * status to devfreq, which is used by governors. * @exit An optional callback that is called when devfreq @@ -66,7 +76,7 @@ struct devfreq_dev_profile { unsigned long initial_freq; unsigned int polling_ms; - int (*target)(struct device *dev, unsigned long *freq); + int (*target)(struct device *dev, unsigned long *freq, u32 flags); int (*get_dev_status)(struct device *dev, struct devfreq_dev_status *stat); void (*exit)(struct device *dev); @@ -124,6 +134,8 @@ struct devfreq_governor { * touch this. * @being_removed a flag to mark that this object is being removed in * order to prevent trying to remove the object multiple times. + * @min_freq Limit minimum frequency requested by user (0: none) + * @max_freq Limit maximum frequency requested by user (0: none) * * This structure stores the devfreq information for a give device. * @@ -149,6 +161,9 @@ struct devfreq { void *data; /* private data for governors */ bool being_removed; + + unsigned long min_freq; + unsigned long max_freq; }; #if defined(CONFIG_PM_DEVFREQ) @@ -160,7 +175,7 @@ extern int devfreq_remove_device(struct devfreq *devfreq); /* Helper functions for devfreq user device driver with OPP. */ extern struct opp *devfreq_recommended_opp(struct device *dev, - unsigned long *freq); + unsigned long *freq, u32 flags); extern int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq); extern int devfreq_unregister_opp_notifier(struct device *dev, @@ -200,18 +215,18 @@ struct devfreq_simple_ondemand_data { static struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, struct devfreq_governor *governor, - void *data); + void *data) { return NULL; } -static int devfreq_remove_device(struct devfreq *devfreq); +static int devfreq_remove_device(struct devfreq *devfreq) { return 0; } static struct opp *devfreq_recommended_opp(struct device *dev, - unsigned long *freq) + unsigned long *freq, u32 flags) { return -EINVAL; } diff --git a/include/linux/pm.h b/include/linux/pm.h index e4982ac3fbb..715305e0512 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -110,6 +110,10 @@ typedef struct pm_message { * Subsystem-level @suspend() is executed for all devices after invoking * subsystem-level @prepare() for all of them. * + * @suspend_late: Continue operations started by @suspend(). For a number of + * devices @suspend_late() may point to the same callback routine as the + * runtime suspend callback. + * * @resume: Executed after waking the system up from a sleep state in which the * contents of main memory were preserved. The exact action to perform * depends on the device's subsystem, but generally the driver is expected @@ -122,6 +126,10 @@ typedef struct pm_message { * Subsystem-level @resume() is executed for all devices after invoking * subsystem-level @resume_noirq() for all of them. * + * @resume_early: Prepare to execute @resume(). For a number of devices + * @resume_early() may point to the same callback routine as the runtime + * resume callback. + * * @freeze: Hibernation-specific, executed before creating a hibernation image. * Analogous to @suspend(), but it should not enable the device to signal * wakeup events or change its power state. The majority of subsystems @@ -131,6 +139,10 @@ typedef struct pm_message { * Subsystem-level @freeze() is executed for all devices after invoking * subsystem-level @prepare() for all of them. * + * @freeze_late: Continue operations started by @freeze(). Analogous to + * @suspend_late(), but it should not enable the device to signal wakeup + * events or change its power state. + * * @thaw: Hibernation-specific, executed after creating a hibernation image OR * if the creation of an image has failed. Also executed after a failing * attempt to restore the contents of main memory from such an image. @@ -140,15 +152,23 @@ typedef struct pm_message { * subsystem-level @thaw_noirq() for all of them. It also may be executed * directly after @freeze() in case of a transition error. * + * @thaw_early: Prepare to execute @thaw(). Undo the changes made by the + * preceding @freeze_late(). + * * @poweroff: Hibernation-specific, executed after saving a hibernation image. * Analogous to @suspend(), but it need not save the device's settings in * memory. * Subsystem-level @poweroff() is executed for all devices after invoking * subsystem-level @prepare() for all of them. * + * @poweroff_late: Continue operations started by @poweroff(). Analogous to + * @suspend_late(), but it need not save the device's settings in memory. + * * @restore: Hibernation-specific, executed after restoring the contents of main * memory from a hibernation image, analogous to @resume(). * + * @restore_early: Prepare to execute @restore(), analogous to @resume_early(). + * * @suspend_noirq: Complete the actions started by @suspend(). Carry out any * additional operations required for suspending the device that might be * racing with its driver's interrupt handler, which is guaranteed not to @@ -158,9 +178,10 @@ typedef struct pm_message { * @suspend_noirq() has returned successfully. If the device can generate * system wakeup signals and is enabled to wake up the system, it should be * configured to do so at that time. However, depending on the platform - * and device's subsystem, @suspend() may be allowed to put the device into - * the low-power state and configure it to generate wakeup signals, in - * which case it generally is not necessary to define @suspend_noirq(). + * and device's subsystem, @suspend() or @suspend_late() may be allowed to + * put the device into the low-power state and configure it to generate + * wakeup signals, in which case it generally is not necessary to define + * @suspend_noirq(). * * @resume_noirq: Prepare for the execution of @resume() by carrying out any * operations required for resuming the device that might be racing with @@ -171,9 +192,9 @@ typedef struct pm_message { * additional operations required for freezing the device that might be * racing with its driver's interrupt handler, which is guaranteed not to * run while @freeze_noirq() is being executed. - * The power state of the device should not be changed by either @freeze() - * or @freeze_noirq() and it should not be configured to signal system - * wakeup by any of these callbacks. + * The power state of the device should not be changed by either @freeze(), + * or @freeze_late(), or @freeze_noirq() and it should not be configured to + * signal system wakeup by any of these callbacks. * * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any * operations required for thawing the device that might be racing with its @@ -249,6 +270,12 @@ struct dev_pm_ops { int (*thaw)(struct device *dev); int (*poweroff)(struct device *dev); int (*restore)(struct device *dev); + int (*suspend_late)(struct device *dev); + int (*resume_early)(struct device *dev); + int (*freeze_late)(struct device *dev); + int (*thaw_early)(struct device *dev); + int (*poweroff_late)(struct device *dev); + int (*restore_early)(struct device *dev); int (*suspend_noirq)(struct device *dev); int (*resume_noirq)(struct device *dev); int (*freeze_noirq)(struct device *dev); @@ -293,6 +320,15 @@ const struct dev_pm_ops name = { \ /* * Use this for defining a set of PM operations to be used in all situations * (sustem suspend, hibernation or runtime PM). + * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should + * be different from the corresponding runtime PM callbacks, .runtime_suspend(), + * and .runtime_resume(), because .runtime_suspend() always works on an already + * quiescent device, while .suspend() should assume that the device may be doing + * something when it is called (it should ensure that the device will be + * quiescent after it has returned). Therefore it's better to point the "late" + * suspend and "early" resume callback pointers, .suspend_late() and + * .resume_early(), to the same routines as .runtime_suspend() and + * .runtime_resume(), respectively (and analogously for hibernation). */ #define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ const struct dev_pm_ops name = { \ @@ -510,6 +546,7 @@ struct dev_pm_info { unsigned long accounting_timestamp; ktime_t suspend_time; s64 max_time_suspended_ns; + struct dev_pm_qos_request *pq_req; #endif struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */ struct pm_qos_constraints *constraints; @@ -584,13 +621,13 @@ struct dev_pm_domain { #ifdef CONFIG_PM_SLEEP extern void device_pm_lock(void); -extern void dpm_resume_noirq(pm_message_t state); +extern void dpm_resume_start(pm_message_t state); extern void dpm_resume_end(pm_message_t state); extern void dpm_resume(pm_message_t state); extern void dpm_complete(pm_message_t state); extern void device_pm_unlock(void); -extern int dpm_suspend_noirq(pm_message_t state); +extern int dpm_suspend_end(pm_message_t state); extern int dpm_suspend_start(pm_message_t state); extern int dpm_suspend(pm_message_t state); extern int dpm_prepare(pm_message_t state); @@ -605,17 +642,23 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); extern int device_pm_wait_for_dev(struct device *sub, struct device *dev); extern int pm_generic_prepare(struct device *dev); +extern int pm_generic_suspend_late(struct device *dev); extern int pm_generic_suspend_noirq(struct device *dev); extern int pm_generic_suspend(struct device *dev); +extern int pm_generic_resume_early(struct device *dev); extern int pm_generic_resume_noirq(struct device *dev); extern int pm_generic_resume(struct device *dev); extern int pm_generic_freeze_noirq(struct device *dev); +extern int pm_generic_freeze_late(struct device *dev); extern int pm_generic_freeze(struct device *dev); extern int pm_generic_thaw_noirq(struct device *dev); +extern int pm_generic_thaw_early(struct device *dev); extern int pm_generic_thaw(struct device *dev); extern int pm_generic_restore_noirq(struct device *dev); +extern int pm_generic_restore_early(struct device *dev); extern int pm_generic_restore(struct device *dev); extern int pm_generic_poweroff_noirq(struct device *dev); +extern int pm_generic_poweroff_late(struct device *dev); extern int pm_generic_poweroff(struct device *dev); extern void pm_generic_complete(struct device *dev); diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index a03a0ad998b..1236d262b3e 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -11,6 +11,7 @@ #include <linux/device.h> #include <linux/err.h> +#include <linux/of.h> enum gpd_status { GPD_STATE_ACTIVE = 0, /* PM domain is active */ @@ -70,6 +71,7 @@ struct generic_pm_domain { s64 break_even_ns; /* Power break even for the entire domain. */ s64 max_off_time_ns; /* Maximum allowed "suspended" time. */ ktime_t power_off_time; + struct device_node *of_node; /* Node in device tree */ }; static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd) @@ -97,14 +99,15 @@ struct generic_pm_domain_data { struct gpd_dev_ops ops; struct gpd_timing_data td; bool need_restore; + bool always_on; }; +#ifdef CONFIG_PM_GENERIC_DOMAINS static inline struct generic_pm_domain_data *to_gpd_data(struct pm_domain_data *pdd) { return container_of(pdd, struct generic_pm_domain_data, base); } -#ifdef CONFIG_PM_GENERIC_DOMAINS static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev) { return to_gpd_data(dev->power.subsys_data->domain_data); @@ -117,14 +120,25 @@ extern int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev, struct gpd_timing_data *td); +extern int __pm_genpd_of_add_device(struct device_node *genpd_node, + struct device *dev, + struct gpd_timing_data *td); + static inline int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev) { return __pm_genpd_add_device(genpd, dev, NULL); } +static inline int pm_genpd_of_add_device(struct device_node *genpd_node, + struct device *dev) +{ + return __pm_genpd_of_add_device(genpd_node, dev, NULL); +} + extern int pm_genpd_remove_device(struct generic_pm_domain *genpd, struct device *dev); +extern void pm_genpd_dev_always_on(struct device *dev, bool val); extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, struct generic_pm_domain *new_subdomain); extern int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, @@ -143,6 +157,10 @@ extern bool default_stop_ok(struct device *dev); extern struct dev_power_governor pm_domain_always_on_gov; #else +static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev) +{ + return ERR_PTR(-ENOSYS); +} static inline struct generic_pm_domain *dev_to_genpd(struct device *dev) { return ERR_PTR(-ENOSYS); @@ -163,6 +181,7 @@ static inline int pm_genpd_remove_device(struct generic_pm_domain *genpd, { return -ENOSYS; } +static inline void pm_genpd_dev_always_on(struct device *dev, bool val) {} static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, struct generic_pm_domain *new_sd) { @@ -183,7 +202,8 @@ static inline int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td) { return -ENOSYS; } -static inline void pm_genpd_init(struct generic_pm_domain *genpd, bool is_off) +static inline void pm_genpd_init(struct generic_pm_domain *genpd, + struct dev_power_governor *gov, bool is_off) { } static inline int pm_genpd_poweron(struct generic_pm_domain *genpd) @@ -194,6 +214,7 @@ static inline bool default_stop_ok(struct device *dev) { return false; } +#define simple_qos_governor NULL #define pm_domain_always_on_gov NULL #endif diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h index 4d99e4e6ef8..2e9191a712f 100644 --- a/include/linux/pm_qos.h +++ b/include/linux/pm_qos.h @@ -9,12 +9,16 @@ #include <linux/miscdevice.h> #include <linux/device.h> -#define PM_QOS_RESERVED 0 -#define PM_QOS_CPU_DMA_LATENCY 1 -#define PM_QOS_NETWORK_LATENCY 2 -#define PM_QOS_NETWORK_THROUGHPUT 3 +enum { + PM_QOS_RESERVED = 0, + PM_QOS_CPU_DMA_LATENCY, + PM_QOS_NETWORK_LATENCY, + PM_QOS_NETWORK_THROUGHPUT, + + /* insert new class ID */ + PM_QOS_NUM_CLASSES, +}; -#define PM_QOS_NUM_CLASSES 4 #define PM_QOS_DEFAULT_VALUE -1 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) @@ -63,7 +67,6 @@ static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req) return req->dev != 0; } -#ifdef CONFIG_PM int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, enum pm_qos_req_action action, int value); void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class, @@ -78,6 +81,7 @@ int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier); int pm_qos_request_active(struct pm_qos_request *req); s32 pm_qos_read_value(struct pm_qos_constraints *c); +#ifdef CONFIG_PM s32 __dev_pm_qos_read_value(struct device *dev); s32 dev_pm_qos_read_value(struct device *dev); int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, @@ -95,45 +99,6 @@ void dev_pm_qos_constraints_destroy(struct device *dev); int dev_pm_qos_add_ancestor_request(struct device *dev, struct dev_pm_qos_request *req, s32 value); #else -static inline int pm_qos_update_target(struct pm_qos_constraints *c, - struct plist_node *node, - enum pm_qos_req_action action, - int value) - { return 0; } -static inline void pm_qos_add_request(struct pm_qos_request *req, - int pm_qos_class, s32 value) - { return; } -static inline void pm_qos_update_request(struct pm_qos_request *req, - s32 new_value) - { return; } -static inline void pm_qos_remove_request(struct pm_qos_request *req) - { return; } - -static inline int pm_qos_request(int pm_qos_class) -{ - switch (pm_qos_class) { - case PM_QOS_CPU_DMA_LATENCY: - return PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; - case PM_QOS_NETWORK_LATENCY: - return PM_QOS_NETWORK_LAT_DEFAULT_VALUE; - case PM_QOS_NETWORK_THROUGHPUT: - return PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE; - default: - return PM_QOS_DEFAULT_VALUE; - } -} - -static inline int pm_qos_add_notifier(int pm_qos_class, - struct notifier_block *notifier) - { return 0; } -static inline int pm_qos_remove_notifier(int pm_qos_class, - struct notifier_block *notifier) - { return 0; } -static inline int pm_qos_request_active(struct pm_qos_request *req) - { return 0; } -static inline s32 pm_qos_read_value(struct pm_qos_constraints *c) - { return 0; } - static inline s32 __dev_pm_qos_read_value(struct device *dev) { return 0; } static inline s32 dev_pm_qos_read_value(struct device *dev) @@ -172,4 +137,13 @@ static inline int dev_pm_qos_add_ancestor_request(struct device *dev, { return 0; } #endif +#ifdef CONFIG_PM_RUNTIME +int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value); +void dev_pm_qos_hide_latency_limit(struct device *dev); +#else +static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) + { return 0; } +static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {} +#endif + #endif diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index a32da962d69..d9f05113e5f 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -41,7 +41,7 @@ * @active: Status of the wakeup source. */ struct wakeup_source { - char *name; + const char *name; struct list_head entry; spinlock_t lock; struct timer_list timer; @@ -73,7 +73,9 @@ static inline bool device_may_wakeup(struct device *dev) } /* drivers/base/power/wakeup.c */ +extern void wakeup_source_prepare(struct wakeup_source *ws, const char *name); extern struct wakeup_source *wakeup_source_create(const char *name); +extern void wakeup_source_drop(struct wakeup_source *ws); extern void wakeup_source_destroy(struct wakeup_source *ws); extern void wakeup_source_add(struct wakeup_source *ws); extern void wakeup_source_remove(struct wakeup_source *ws); @@ -103,11 +105,16 @@ static inline bool device_can_wakeup(struct device *dev) return dev->power.can_wakeup; } +static inline void wakeup_source_prepare(struct wakeup_source *ws, + const char *name) {} + static inline struct wakeup_source *wakeup_source_create(const char *name) { return NULL; } +static inline void wakeup_source_drop(struct wakeup_source *ws) {} + static inline void wakeup_source_destroy(struct wakeup_source *ws) {} static inline void wakeup_source_add(struct wakeup_source *ws) {} @@ -165,4 +172,17 @@ static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {} #endif /* !CONFIG_PM_SLEEP */ +static inline void wakeup_source_init(struct wakeup_source *ws, + const char *name) +{ + wakeup_source_prepare(ws, name); + wakeup_source_add(ws); +} + +static inline void wakeup_source_trash(struct wakeup_source *ws) +{ + wakeup_source_remove(ws); + wakeup_source_drop(ws); +} + #endif /* _LINUX_PM_WAKEUP_H */ diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 91784a4f860..ac1c114c499 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -42,8 +42,10 @@ enum suspend_stat_step { SUSPEND_FREEZE = 1, SUSPEND_PREPARE, SUSPEND_SUSPEND, + SUSPEND_SUSPEND_LATE, SUSPEND_SUSPEND_NOIRQ, SUSPEND_RESUME_NOIRQ, + SUSPEND_RESUME_EARLY, SUSPEND_RESUME }; @@ -53,8 +55,10 @@ struct suspend_stats { int failed_freeze; int failed_prepare; int failed_suspend; + int failed_suspend_late; int failed_suspend_noirq; int failed_resume; + int failed_resume_early; int failed_resume_noirq; #define REC_FAILED_NUM 2 int last_failed_dev; diff --git a/kernel/exit.c b/kernel/exit.c index ce5f758f40b..0ed15fed579 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -424,7 +424,7 @@ void daemonize(const char *name, ...) */ exit_mm(current); /* - * We don't want to have TIF_FREEZE set if the system-wide hibernation + * We don't want to get frozen, in case system-wide hibernation * or suspend transition begins right now. */ current->flags |= (PF_NOFREEZE | PF_KTHREAD); diff --git a/kernel/freezer.c b/kernel/freezer.c index 9815b8d1eed..11f82a4d4ea 100644 --- a/kernel/freezer.c +++ b/kernel/freezer.c @@ -99,9 +99,9 @@ static void fake_signal_wake_up(struct task_struct *p) * freeze_task - send a freeze request to given task * @p: task to send the request to * - * If @p is freezing, the freeze request is sent by setting %TIF_FREEZE - * flag and either sending a fake signal to it or waking it up, depending - * on whether it has %PF_FREEZER_NOSIG set. + * If @p is freezing, the freeze request is sent either by sending a fake + * signal (if it's not a kernel thread) or waking it up (if it's a kernel + * thread). * * RETURNS: * %false, if @p is not freezing or already frozen; %true, otherwise diff --git a/kernel/kexec.c b/kernel/kexec.c index 7b088678670..a6a675cb981 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -1546,13 +1546,13 @@ int kernel_kexec(void) if (error) goto Resume_console; /* At this point, dpm_suspend_start() has been called, - * but *not* dpm_suspend_noirq(). We *must* call - * dpm_suspend_noirq() now. Otherwise, drivers for + * but *not* dpm_suspend_end(). We *must* call + * dpm_suspend_end() now. Otherwise, drivers for * some devices (e.g. interrupt controllers) become * desynchronized with the actual state of the * hardware at resume time, and evil weirdness ensues. */ - error = dpm_suspend_noirq(PMSG_FREEZE); + error = dpm_suspend_end(PMSG_FREEZE); if (error) goto Resume_devices; error = disable_nonboot_cpus(); @@ -1579,7 +1579,7 @@ int kernel_kexec(void) local_irq_enable(); Enable_cpus: enable_nonboot_cpus(); - dpm_resume_noirq(PMSG_RESTORE); + dpm_resume_start(PMSG_RESTORE); Resume_devices: dpm_resume_end(PMSG_RESTORE); Resume_console: diff --git a/kernel/power/Makefile b/kernel/power/Makefile index 07e0e28ffba..66d808ec525 100644 --- a/kernel/power/Makefile +++ b/kernel/power/Makefile @@ -1,7 +1,8 @@ ccflags-$(CONFIG_PM_DEBUG) := -DDEBUG -obj-$(CONFIG_PM) += main.o qos.o +obj-y += qos.o +obj-$(CONFIG_PM) += main.o obj-$(CONFIG_VT_CONSOLE_SLEEP) += console.o obj-$(CONFIG_FREEZER) += process.o obj-$(CONFIG_SUSPEND) += suspend.o diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 6d6d2887033..0a186cfde78 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -245,8 +245,8 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop, * create_image - Create a hibernation image. * @platform_mode: Whether or not to use the platform driver. * - * Execute device drivers' .freeze_noirq() callbacks, create a hibernation image - * and execute the drivers' .thaw_noirq() callbacks. + * Execute device drivers' "late" and "noirq" freeze callbacks, create a + * hibernation image and run the drivers' "noirq" and "early" thaw callbacks. * * Control reappears in this routine after the subsequent restore. */ @@ -254,7 +254,7 @@ static int create_image(int platform_mode) { int error; - error = dpm_suspend_noirq(PMSG_FREEZE); + error = dpm_suspend_end(PMSG_FREEZE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting hibernation\n"); @@ -306,7 +306,7 @@ static int create_image(int platform_mode) Platform_finish: platform_finish(platform_mode); - dpm_resume_noirq(in_suspend ? + dpm_resume_start(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); return error; @@ -343,13 +343,13 @@ int hibernation_snapshot(int platform_mode) * successful freezer test. */ freezer_test_done = true; - goto Cleanup; + goto Thaw; } error = dpm_prepare(PMSG_FREEZE); if (error) { dpm_complete(PMSG_RECOVER); - goto Cleanup; + goto Thaw; } suspend_console(); @@ -385,6 +385,8 @@ int hibernation_snapshot(int platform_mode) platform_end(platform_mode); return error; + Thaw: + thaw_kernel_threads(); Cleanup: swsusp_free(); goto Close; @@ -394,16 +396,16 @@ int hibernation_snapshot(int platform_mode) * resume_target_kernel - Restore system state from a hibernation image. * @platform_mode: Whether or not to use the platform driver. * - * Execute device drivers' .freeze_noirq() callbacks, restore the contents of - * highmem that have not been restored yet from the image and run the low-level - * code that will restore the remaining contents of memory and switch to the - * just restored target kernel. + * Execute device drivers' "noirq" and "late" freeze callbacks, restore the + * contents of highmem that have not been restored yet from the image and run + * the low-level code that will restore the remaining contents of memory and + * switch to the just restored target kernel. */ static int resume_target_kernel(bool platform_mode) { int error; - error = dpm_suspend_noirq(PMSG_QUIESCE); + error = dpm_suspend_end(PMSG_QUIESCE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting resume\n"); @@ -460,7 +462,7 @@ static int resume_target_kernel(bool platform_mode) Cleanup: platform_restore_cleanup(platform_mode); - dpm_resume_noirq(PMSG_RECOVER); + dpm_resume_start(PMSG_RECOVER); return error; } @@ -518,7 +520,7 @@ int hibernation_platform_enter(void) goto Resume_devices; } - error = dpm_suspend_noirq(PMSG_HIBERNATE); + error = dpm_suspend_end(PMSG_HIBERNATE); if (error) goto Resume_devices; @@ -549,7 +551,7 @@ int hibernation_platform_enter(void) Platform_finish: hibernation_ops->finish(); - dpm_resume_noirq(PMSG_RESTORE); + dpm_resume_start(PMSG_RESTORE); Resume_devices: entering_platform_hibernation = false; @@ -616,7 +618,7 @@ int hibernate(void) /* Allocate memory management structures */ error = create_basic_memory_bitmaps(); if (error) - goto Exit; + goto Enable_umh; printk(KERN_INFO "PM: Syncing filesystems ... "); sys_sync(); @@ -624,15 +626,11 @@ int hibernate(void) error = freeze_processes(); if (error) - goto Finish; + goto Free_bitmaps; error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM); - if (error) - goto Thaw; - if (freezer_test_done) { - freezer_test_done = false; + if (error || freezer_test_done) goto Thaw; - } if (in_suspend) { unsigned int flags = 0; @@ -657,8 +655,13 @@ int hibernate(void) Thaw: thaw_processes(); - Finish: + + /* Don't bother checking whether freezer_test_done is true */ + freezer_test_done = false; + + Free_bitmaps: free_basic_memory_bitmaps(); + Enable_umh: usermodehelper_enable(); Exit: pm_notifier_call_chain(PM_POST_HIBERNATION); diff --git a/kernel/power/main.c b/kernel/power/main.c index 9824b41e5a1..1c12581f1c6 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -165,16 +165,20 @@ static int suspend_stats_show(struct seq_file *s, void *unused) last_errno %= REC_FAILED_NUM; last_step = suspend_stats.last_failed_step + REC_FAILED_NUM - 1; last_step %= REC_FAILED_NUM; - seq_printf(s, "%s: %d\n%s: %d\n%s: %d\n%s: %d\n" - "%s: %d\n%s: %d\n%s: %d\n%s: %d\n", + seq_printf(s, "%s: %d\n%s: %d\n%s: %d\n%s: %d\n%s: %d\n" + "%s: %d\n%s: %d\n%s: %d\n%s: %d\n%s: %d\n", "success", suspend_stats.success, "fail", suspend_stats.fail, "failed_freeze", suspend_stats.failed_freeze, "failed_prepare", suspend_stats.failed_prepare, "failed_suspend", suspend_stats.failed_suspend, + "failed_suspend_late", + suspend_stats.failed_suspend_late, "failed_suspend_noirq", suspend_stats.failed_suspend_noirq, "failed_resume", suspend_stats.failed_resume, + "failed_resume_early", + suspend_stats.failed_resume_early, "failed_resume_noirq", suspend_stats.failed_resume_noirq); seq_printf(s, "failures:\n last_failed_dev:\t%-s\n", @@ -287,16 +291,10 @@ static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr, #ifdef CONFIG_SUSPEND for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++) { - if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) + if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) { + error = pm_suspend(state); break; - } - if (state < PM_SUSPEND_MAX && *s) { - error = enter_state(state); - if (error) { - suspend_stats.fail++; - dpm_save_failed_errno(error); - } else - suspend_stats.success++; + } } #endif diff --git a/kernel/power/power.h b/kernel/power/power.h index 21724eee520..98f3622d740 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -177,13 +177,11 @@ extern const char *const pm_states[]; extern bool valid_state(suspend_state_t state); extern int suspend_devices_and_enter(suspend_state_t state); -extern int enter_state(suspend_state_t state); #else /* !CONFIG_SUSPEND */ static inline int suspend_devices_and_enter(suspend_state_t state) { return -ENOSYS; } -static inline int enter_state(suspend_state_t state) { return -ENOSYS; } static inline bool valid_state(suspend_state_t state) { return false; } #endif /* !CONFIG_SUSPEND */ @@ -234,16 +232,14 @@ static inline int suspend_freeze_processes(void) int error; error = freeze_processes(); - /* * freeze_processes() automatically thaws every task if freezing * fails. So we need not do anything extra upon error. */ if (error) - goto Finish; + return error; error = freeze_kernel_threads(); - /* * freeze_kernel_threads() thaws only kernel threads upon freezing * failure. So we have to thaw the userspace tasks ourselves. @@ -251,7 +247,6 @@ static inline int suspend_freeze_processes(void) if (error) thaw_processes(); - Finish: return error; } diff --git a/kernel/power/process.c b/kernel/power/process.c index 7e426459e60..0d2aeb22610 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -53,11 +53,9 @@ static int try_to_freeze_tasks(bool user_only) * It is "frozen enough". If the task does wake * up, it will immediately call try_to_freeze. * - * Because freeze_task() goes through p's - * scheduler lock after setting TIF_FREEZE, it's - * guaranteed that either we see TASK_RUNNING or - * try_to_stop() after schedule() in ptrace/signal - * stop sees TIF_FREEZE. + * Because freeze_task() goes through p's scheduler lock, it's + * guaranteed that TASK_STOPPED/TRACED -> TASK_RUNNING + * transition can't race with task state testing here. */ if (!task_is_stopped_or_traced(p) && !freezer_should_skip(p)) @@ -98,13 +96,15 @@ static int try_to_freeze_tasks(bool user_only) elapsed_csecs / 100, elapsed_csecs % 100, todo - wq_busy, wq_busy); - read_lock(&tasklist_lock); - do_each_thread(g, p) { - if (!wakeup && !freezer_should_skip(p) && - p != current && freezing(p) && !frozen(p)) - sched_show_task(p); - } while_each_thread(g, p); - read_unlock(&tasklist_lock); + if (!wakeup) { + read_lock(&tasklist_lock); + do_each_thread(g, p) { + if (p != current && !freezer_should_skip(p) + && freezing(p) && !frozen(p)) + sched_show_task(p); + } while_each_thread(g, p); + read_unlock(&tasklist_lock); + } } else { printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100, elapsed_csecs % 100); diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 995e3bd3417..d6d6dbd1ecc 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -469,21 +469,18 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf, static int __init pm_qos_power_init(void) { int ret = 0; + int i; - ret = register_pm_qos_misc(&cpu_dma_pm_qos); - if (ret < 0) { - printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n"); - return ret; - } - ret = register_pm_qos_misc(&network_lat_pm_qos); - if (ret < 0) { - printk(KERN_ERR "pm_qos_param: network_latency setup failed\n"); - return ret; + BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES); + + for (i = 1; i < PM_QOS_NUM_CLASSES; i++) { + ret = register_pm_qos_misc(pm_qos_array[i]); + if (ret < 0) { + printk(KERN_ERR "pm_qos_param: %s setup failed\n", + pm_qos_array[i]->name); + return ret; + } } - ret = register_pm_qos_misc(&network_throughput_pm_qos); - if (ret < 0) - printk(KERN_ERR - "pm_qos_param: network_throughput setup failed\n"); return ret; } diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 3a564ac85f3..0de28576807 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -711,9 +711,10 @@ static void mark_nosave_pages(struct memory_bitmap *bm) list_for_each_entry(region, &nosave_regions, list) { unsigned long pfn; - pr_debug("PM: Marking nosave pages: %016lx - %016lx\n", - region->start_pfn << PAGE_SHIFT, - region->end_pfn << PAGE_SHIFT); + pr_debug("PM: Marking nosave pages: [mem %#010llx-%#010llx]\n", + (unsigned long long) region->start_pfn << PAGE_SHIFT, + ((unsigned long long) region->end_pfn << PAGE_SHIFT) + - 1); for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++) if (pfn_valid(pfn)) { diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 4fd51beed87..88e5c967370 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -37,8 +37,8 @@ const char *const pm_states[PM_SUSPEND_MAX] = { static const struct platform_suspend_ops *suspend_ops; /** - * suspend_set_ops - Set the global suspend method table. - * @ops: Pointer to ops structure. + * suspend_set_ops - Set the global suspend method table. + * @ops: Suspend operations to use. */ void suspend_set_ops(const struct platform_suspend_ops *ops) { @@ -58,11 +58,11 @@ bool valid_state(suspend_state_t state) } /** - * suspend_valid_only_mem - generic memory-only valid callback + * suspend_valid_only_mem - Generic memory-only valid callback. * - * Platform drivers that implement mem suspend only and only need - * to check for that in their .valid callback can use this instead - * of rolling their own .valid callback. + * Platform drivers that implement mem suspend only and only need to check for + * that in their .valid() callback can use this instead of rolling their own + * .valid() callback. */ int suspend_valid_only_mem(suspend_state_t state) { @@ -83,10 +83,11 @@ static int suspend_test(int level) } /** - * suspend_prepare - Do prep work before entering low-power state. + * suspend_prepare - Prepare for entering system sleep state. * - * This is common code that is called for each state that we're entering. - * Run suspend notifiers, allocate a console and stop all processes. + * Common code run for every system sleep state that can be entered (except for + * hibernation). Run suspend notifiers, allocate the "suspend" console and + * freeze processes. */ static int suspend_prepare(void) { @@ -131,9 +132,9 @@ void __attribute__ ((weak)) arch_suspend_enable_irqs(void) } /** - * suspend_enter - enter the desired system sleep state. - * @state: State to enter - * @wakeup: Returns information that suspend should not be entered again. + * suspend_enter - Make the system enter the given sleep state. + * @state: System sleep state to enter. + * @wakeup: Returns information that the sleep state should not be re-entered. * * This function should be called after devices have been suspended. */ @@ -147,7 +148,7 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) goto Platform_finish; } - error = dpm_suspend_noirq(PMSG_SUSPEND); + error = dpm_suspend_end(PMSG_SUSPEND); if (error) { printk(KERN_ERR "PM: Some devices failed to power down\n"); goto Platform_finish; @@ -189,7 +190,7 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) if (suspend_ops->wake) suspend_ops->wake(); - dpm_resume_noirq(PMSG_RESUME); + dpm_resume_start(PMSG_RESUME); Platform_finish: if (suspend_ops->finish) @@ -199,9 +200,8 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) } /** - * suspend_devices_and_enter - suspend devices and enter the desired system - * sleep state. - * @state: state to enter + * suspend_devices_and_enter - Suspend devices and enter system sleep state. + * @state: System sleep state to enter. */ int suspend_devices_and_enter(suspend_state_t state) { @@ -251,10 +251,10 @@ int suspend_devices_and_enter(suspend_state_t state) } /** - * suspend_finish - Do final work before exiting suspend sequence. + * suspend_finish - Clean up before finishing the suspend sequence. * - * Call platform code to clean up, restart processes, and free the - * console that we've allocated. This is not called for suspend-to-disk. + * Call platform code to clean up, restart processes, and free the console that + * we've allocated. This routine is not called for hibernation. */ static void suspend_finish(void) { @@ -265,16 +265,14 @@ static void suspend_finish(void) } /** - * enter_state - Do common work of entering low-power state. - * @state: pm_state structure for state we're entering. + * enter_state - Do common work needed to enter system sleep state. + * @state: System sleep state to enter. * - * Make sure we're the only ones trying to enter a sleep state. Fail - * if someone has beat us to it, since we don't want anything weird to - * happen when we wake up. - * Then, do the setup for suspend, enter the state, and cleaup (after - * we've woken up). + * Make sure that no one else is trying to put the system into a sleep state. + * Fail if that's not the case. Otherwise, prepare for system suspend, make the + * system enter the given sleep state and clean up after wakeup. */ -int enter_state(suspend_state_t state) +static int enter_state(suspend_state_t state) { int error; @@ -310,24 +308,26 @@ int enter_state(suspend_state_t state) } /** - * pm_suspend - Externally visible function for suspending system. - * @state: Enumerated value of state to enter. + * pm_suspend - Externally visible function for suspending the system. + * @state: System sleep state to enter. * - * Determine whether or not value is within range, get state - * structure, and enter (above). + * Check if the value of @state represents one of the supported states, + * execute enter_state() and update system suspend statistics. */ int pm_suspend(suspend_state_t state) { - int ret; - if (state > PM_SUSPEND_ON && state < PM_SUSPEND_MAX) { - ret = enter_state(state); - if (ret) { - suspend_stats.fail++; - dpm_save_failed_errno(ret); - } else - suspend_stats.success++; - return ret; + int error; + + if (state <= PM_SUSPEND_ON || state >= PM_SUSPEND_MAX) + return -EINVAL; + + error = enter_state(state); + if (error) { + suspend_stats.fail++; + dpm_save_failed_errno(error); + } else { + suspend_stats.success++; } - return -EINVAL; + return error; } EXPORT_SYMBOL(pm_suspend); diff --git a/kernel/power/user.c b/kernel/power/user.c index 3e100075b13..33c4329205a 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -249,16 +249,10 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, } pm_restore_gfp_mask(); error = hibernation_snapshot(data->platform_support); - if (error) { - thaw_kernel_threads(); - } else { + if (!error) { error = put_user(in_suspend, (int __user *)arg); - if (!error && !freezer_test_done) - data->ready = 1; - if (freezer_test_done) { - freezer_test_done = false; - thaw_kernel_threads(); - } + data->ready = !freezer_test_done && !error; + freezer_test_done = false; } break; |