diff options
48 files changed, 997 insertions, 148 deletions
diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c new file mode 100644 index 00000000000..30fe4bb9a06 --- /dev/null +++ b/Documentation/i2c/busses/i2c-diolan-u2c @@ -0,0 +1,26 @@ +Kernel driver i2c-diolan-u2c + +Supported adapters: + * Diolan U2C-12 I2C-USB adapter + Documentation: + http://www.diolan.com/i2c/u2c12.html + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + +Description +----------- + +This is the driver for the Diolan U2C-12 USB-I2C adapter. + +The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect +a computer to I2C slave devices using a USB interface. It also supports +connectivity to SPI devices. + +This driver only supports the I2C interface of U2C-12. The driver does not use +interrupts. + + +Module parameters +----------------- + +* frequency: I2C bus frequency diff --git a/MAINTAINERS b/MAINTAINERS index 38077a65682..53e315e777f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2138,6 +2138,12 @@ F: Documentation/serial/digiepca.txt F: drivers/char/epca* F: drivers/char/digi* +DIOLAN U2C-12 I2C DRIVER +M: Guenter Roeck <guenter.roeck@ericsson.com> +L: linux-i2c@vger.kernel.org +S: Maintained +F: drivers/i2c/busses/i2c-diolan-u2c.c + DIRECTORY NOTIFICATION (DNOTIFY) M: Eric Paris <eparis@parisplace.org> S: Maintained diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 4aec493640b..2cbf6df09b8 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -11,8 +11,8 @@ extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> extern struct pxa_device_desc mmp2_device_uart1; extern struct pxa_device_desc mmp2_device_uart2; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 1801e420623..a52b3d2f325 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -8,8 +8,8 @@ extern void __init pxa168_init_irq(void); extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <video/pxa168fb.h> #include <plat/pxa27x_keypad.h> diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index f13c49d6f8d..91be7559139 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -7,8 +7,8 @@ extern struct sys_timer pxa910_timer; extern void __init pxa910_init_irq(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> extern struct pxa_device_desc pxa910_device_uart1; diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index e194d928cda..d2af73321da 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -27,6 +27,7 @@ #include <linux/mtd/partitions.h> #include <linux/types.h> #include <linux/i2c/pcf857x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mtd/nand.h> #include <linux/mtd/physmap.h> #include <linux/regulator/max1586.h> @@ -51,8 +52,6 @@ #include <mach/irda.h> #include <mach/ohci.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7984268508b..bfca7ed2fea 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -29,6 +29,7 @@ #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/da903x.h> #include <linux/regulator/machine.h> @@ -48,7 +49,6 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/audio.h> #include <mach/pxa3xx-u2d.h> diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 28f667e52ef..81c3c433e2d 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -20,6 +20,7 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/pxa27x.h> #include <mach/colibri.h> @@ -27,8 +28,6 @@ #include <mach/ohci.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 07b62a096f1..ee797397dc5 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/pwm_backlight.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/sysdev.h> #include <asm/irq.h> @@ -33,8 +34,6 @@ #include <mach/pxa27x-udc.h> #include <mach/pxafb.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a5452a3a276..d4e705caefe 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -45,7 +46,6 @@ #include <asm/mach/irq.h> #include <mach/pxa25x.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index a305424a967..0481c29a70e 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,12 +17,12 @@ #include <linux/mtd/partitions.h> #include <linux/sm501.h> #include <linux/smsc911x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> #include <mach/mfp-pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 4c766e3b4af..c4bf08b3eb6 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/pxa2xx_spi.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/pmu.h> #include <mach/udc.h> @@ -16,7 +17,6 @@ #include <mach/camera.h> #include <mach/audio.h> #include <mach/hardware.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index a78bb309773..b411d7cbf5a 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -31,6 +31,7 @@ #include <linux/apm-emulation.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/regulator/userspace-consumer.h> #include <media/soc_camera.h> @@ -45,7 +46,6 @@ #include <mach/ohci.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> #include <mach/camera.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 87cec0abe5b..93f05e02431 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> +#include <linux/i2c/pxa-i2c.h> #include <media/soc_camera.h> @@ -30,7 +31,6 @@ #include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <mach/hardware.h> #include <plat/pxa27x_keypad.h> #include <mach/camera.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a908e0a5f39..6de0ad0eea6 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -35,6 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -42,7 +43,6 @@ #include <mach/pxa27x.h> #include <mach/hx4700.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index ccb7bfad17c..87c1ed9ccd2 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -28,6 +28,7 @@ #include <linux/leds.h> #include <linux/mfd/da903x.h> #include <linux/i2c/max732x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -45,7 +46,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> #include <mach/littleton.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 41198f0dc3a..5535991c4a3 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -28,6 +28,7 @@ #include <linux/regulator/bq24022.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -36,7 +37,6 @@ #include <mach/pxa27x.h> #include <mach/magician.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d4b6f2375f2..f9542220595 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -27,6 +27,7 @@ #include <linux/gpio_keys.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -46,7 +47,6 @@ #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index faafea3542f..78d98a8607e 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -39,6 +39,7 @@ #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -50,7 +51,6 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <mach/audio.h> #include <media/soc_camera.h> diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index cdf7f41e2bb..b5a8fd3fce0 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -22,8 +22,8 @@ #include <linux/serial_8250.h> #include <linux/dm9000.h> #include <linux/gpio.h> +#include <linux/i2c/pxa-i2c.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 35572c427fa..72adb3ae2b4 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -22,6 +22,7 @@ #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,8 +37,6 @@ #include <mach/palmasoc.h> #include <mach/palm27x.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 90820faa711..9dbf3ccd415 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,12 +23,12 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/pwm_backlight.h> #include <media/soc_camera.h> #include <asm/gpio.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 4f0ff1ab623..35353af345d 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -23,6 +23,7 @@ #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> @@ -44,7 +45,6 @@ #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 28b11be00b3..1cb5d0f9723 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -19,6 +19,7 @@ #include <linux/sysdev.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,8 +33,6 @@ #include <mach/dma.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" #include "clock.h" diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 1230343d9c7..f374247b846 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,7 +33,6 @@ #include <mach/dma.h> #include <mach/regs-intc.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 437980f7271..23b229bd06e 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> @@ -27,7 +28,6 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/regs-intc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8361151be05..47094188e02 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -32,6 +32,7 @@ #include <linux/sched.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/lis3lv02d.h> @@ -53,7 +54,6 @@ #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/mmc.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index c1ca8cb467f..eb83c89428e 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mfd/da903x.h> #include <linux/mtd/mtd.h> @@ -31,7 +32,6 @@ #include <asm/mach/flash.h> #include <mach/pxa930.h> -#include <plat/i2c.h> #include <mach/pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index e497922f761..9322fe527c7 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> #include <asm/mach-types.h> @@ -24,8 +25,6 @@ #include <mach/mfp-pxa930.h> #include <mach/gpio.h> -#include <plat/i2c.h> - #include "generic.h" #define SAARB_NR_IRQS (IRQ_BOARD_START + 40) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b49a2c21124..38e2c0912b9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -47,8 +48,6 @@ #include <mach/sharpsl_pm.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 9a14fdb83c8..cb5611daf5f 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -25,6 +25,7 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> #include <linux/smc91x.h> @@ -43,7 +44,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 70191a9450e..79f4422f12f 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> @@ -23,8 +24,6 @@ #include <mach/pxa930.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f2582ec300d..5ad3807af33 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,6 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -41,7 +42,6 @@ #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 423261d63d0..857bb2e6348 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -47,7 +48,6 @@ #include <mach/irda.h> #include <mach/ohci.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 49eeeab2368..12279214c87 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -36,6 +36,7 @@ #include <linux/gpio.h> #include <linux/jiffies.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> #include <linux/pwm_backlight.h> @@ -47,7 +48,6 @@ #include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/regs-uart.h> #include <mach/arcom-pcmcia.h> #include <mach/viper.h> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index b9b579715ff..e709fd45926 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -26,6 +26,7 @@ #include <linux/ucb1400.h> #include <linux/ata_platform.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/udc.h> #include <mach/pata_pxa.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 51c0281c6e0..f55f8f2e0db 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -26,8 +27,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa25x.h> diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index a323e076129..aaf883754ef 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -29,6 +29,7 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/regulator/machine.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b92aa3b8c4f..730f51e57c1 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/apm-emulation.h> #include <linux/can/platform/mcp251x.h> @@ -33,8 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/pxa2xx-regs.h> #include <mach/regs-uart.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 3aa73b3e33f..93c64d8d7de 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,11 +17,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <mach/pxa300.h> -#include <plat/i2c.h> #include <mach/zylonite.h> #include "generic.h" diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ad415e6ec5a..326652f673f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -547,15 +547,18 @@ config I2C_PUV3 config I2C_PXA tristate "Intel PXA2XX I2C adapter" - depends on ARCH_PXA || ARCH_MMP + depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF) help If you have devices in the PXA I2C bus, say yes to this option. This driver can also be built as a module. If so, the module will be called i2c-pxa. +config I2C_PXA_PCI + def_bool I2C_PXA && X86_32 && PCI && OF + config I2C_PXA_SLAVE bool "Intel PXA2XX I2C Slave comms support" - depends on I2C_PXA + depends on I2C_PXA && !X86_32 help Support I2C slave mode communications on the PXA I2C bus. This is necessary for systems where the PXA may be a target on the @@ -668,15 +671,28 @@ config I2C_XILINX will be called xilinx_i2c. config I2C_EG20T - tristate "PCH I2C of Intel EG20T" - depends on PCI - help - This driver is for PCH(Platform controller Hub) I2C of EG20T which - is an IOH(Input/Output Hub) for x86 embedded processor. - This driver can access PCH I2C bus device. + tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH" + depends on PCI + help + This driver is for PCH(Platform controller Hub) I2C of EG20T which + is an IOH(Input/Output Hub) for x86 embedded processor. + This driver can access PCH I2C bus device. + + This driver also supports the ML7213, a companion chip for the + Atom E6xx series and compatible with the Intel EG20T PCH. comment "External I2C/SMBus adapter drivers" +config I2C_DIOLAN_U2C + tristate "Diolan U2C-12 USB adapter" + depends on USB + help + If you say yes to this option, support will be included for Diolan + U2C-12, a USB to I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-diolan-u2c. + config I2C_PARPORT tristate "Parallel port adapter" depends on PARPORT diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 3878c959d4f..e6cf294d372 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o +obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o @@ -67,6 +68,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o # External I2C/SMBus adapter drivers +obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c new file mode 100644 index 00000000000..76366716a85 --- /dev/null +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -0,0 +1,535 @@ +/* + * Driver for the Diolan u2c-12 USB-I2C adapter + * + * Copyright (c) 2010-2011 Ericsson AB + * + * Derived from: + * i2c-tiny-usb.c + * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/i2c.h> + +#define DRIVER_NAME "i2c-diolan-u2c" + +#define USB_VENDOR_ID_DIOLAN 0x0abf +#define USB_DEVICE_ID_DIOLAN_U2C 0x3370 + +#define DIOLAN_OUT_EP 0x02 +#define DIOLAN_IN_EP 0x84 + +/* commands via USB, must match command ids in the firmware */ +#define CMD_I2C_READ 0x01 +#define CMD_I2C_WRITE 0x02 +#define CMD_I2C_SCAN 0x03 /* Returns list of detected devices */ +#define CMD_I2C_RELEASE_SDA 0x04 +#define CMD_I2C_RELEASE_SCL 0x05 +#define CMD_I2C_DROP_SDA 0x06 +#define CMD_I2C_DROP_SCL 0x07 +#define CMD_I2C_READ_SDA 0x08 +#define CMD_I2C_READ_SCL 0x09 +#define CMD_GET_FW_VERSION 0x0a +#define CMD_GET_SERIAL 0x0b +#define CMD_I2C_START 0x0c +#define CMD_I2C_STOP 0x0d +#define CMD_I2C_REPEATED_START 0x0e +#define CMD_I2C_PUT_BYTE 0x0f +#define CMD_I2C_GET_BYTE 0x10 +#define CMD_I2C_PUT_ACK 0x11 +#define CMD_I2C_GET_ACK 0x12 +#define CMD_I2C_PUT_BYTE_ACK 0x13 +#define CMD_I2C_GET_BYTE_ACK 0x14 +#define CMD_I2C_SET_SPEED 0x1b +#define CMD_I2C_GET_SPEED 0x1c +#define CMD_I2C_SET_CLK_SYNC 0x24 +#define CMD_I2C_GET_CLK_SYNC 0x25 +#define CMD_I2C_SET_CLK_SYNC_TO 0x26 +#define CMD_I2C_GET_CLK_SYNC_TO 0x27 + +#define RESP_OK 0x00 +#define RESP_FAILED 0x01 +#define RESP_BAD_MEMADDR 0x04 +#define RESP_DATA_ERR 0x05 +#define RESP_NOT_IMPLEMENTED 0x06 +#define RESP_NACK 0x07 +#define RESP_TIMEOUT 0x09 + +#define U2C_I2C_SPEED_FAST 0 /* 400 kHz */ +#define U2C_I2C_SPEED_STD 1 /* 100 kHz */ +#define U2C_I2C_SPEED_2KHZ 242 /* 2 kHz, minimum speed */ +#define U2C_I2C_SPEED(f) ((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1) + +#define U2C_I2C_FREQ_FAST 400000 +#define U2C_I2C_FREQ_STD 100000 +#define U2C_I2C_FREQ(s) (1000000 / (2 * (s - 1) + 10)) + +#define DIOLAN_USB_TIMEOUT 100 /* in ms */ +#define DIOLAN_SYNC_TIMEOUT 20 /* in ms */ + +#define DIOLAN_OUTBUF_LEN 128 +#define DIOLAN_FLUSH_LEN (DIOLAN_OUTBUF_LEN - 4) +#define DIOLAN_INBUF_LEN 256 /* Maximum supported receive length */ + +/* Structure to hold all of our device specific stuff */ +struct i2c_diolan_u2c { + u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */ + u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */ + struct usb_device *usb_dev; /* the usb device for this device */ + struct usb_interface *interface;/* the interface for this device */ + struct i2c_adapter adapter; /* i2c related things */ + int olen; /* Output buffer length */ + int ocount; /* Number of enqueued messages */ +}; + +static uint frequency = U2C_I2C_FREQ_STD; /* I2C clock frequency in Hz */ + +module_param(frequency, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz"); + +/* usb layer */ + +/* Send command to device, and get response. */ +static int diolan_usb_transfer(struct i2c_diolan_u2c *dev) +{ + int ret = 0; + int actual; + int i; + + if (!dev->olen || !dev->ocount) + return -EINVAL; + + ret = usb_bulk_msg(dev->usb_dev, + usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP), + dev->obuffer, dev->olen, &actual, + DIOLAN_USB_TIMEOUT); + if (!ret) { + for (i = 0; i < dev->ocount; i++) { + int tmpret; + + tmpret = usb_bulk_msg(dev->usb_dev, + usb_rcvbulkpipe(dev->usb_dev, + DIOLAN_IN_EP), + dev->ibuffer, + sizeof(dev->ibuffer), &actual, + DIOLAN_USB_TIMEOUT); + /* + * Stop command processing if a previous command + * returned an error. + * Note that we still need to retrieve all messages. + */ + if (ret < 0) + continue; + ret = tmpret; + if (ret == 0 && actual > 0) { + switch (dev->ibuffer[actual - 1]) { + case RESP_NACK: + /* + * Return ENXIO if NACK was received as + * response to the address phase, + * EIO otherwise + */ + ret = i == 1 ? -ENXIO : -EIO; + break; + case RESP_TIMEOUT: + ret = -ETIMEDOUT; + break; + case RESP_OK: + /* strip off return code */ + ret = actual - 1; + break; + default: + ret = -EIO; + break; + } + } + } + } + dev->olen = 0; + dev->ocount = 0; + return ret; +} + +static int diolan_write_cmd(struct i2c_diolan_u2c *dev, bool flush) +{ + if (flush || dev->olen >= DIOLAN_FLUSH_LEN) + return diolan_usb_transfer(dev); + return 0; +} + +/* Send command (no data) */ +static int diolan_usb_cmd(struct i2c_diolan_u2c *dev, u8 command, bool flush) +{ + dev->obuffer[dev->olen++] = command; + dev->ocount++; + return diolan_write_cmd(dev, flush); +} + +/* Send command with one byte of data */ +static int diolan_usb_cmd_data(struct i2c_diolan_u2c *dev, u8 command, u8 data, + bool flush) +{ + dev->obuffer[dev->olen++] = command; + dev->obuffer[dev->olen++] = data; + dev->ocount++; + return diolan_write_cmd(dev, flush); +} + +/* Send command with two bytes of data */ +static int diolan_usb_cmd_data2(struct i2c_diolan_u2c *dev, u8 command, u8 d1, + u8 d2, bool flush) +{ + dev->obuffer[dev->olen++] = command; + dev->obuffer[dev->olen++] = d1; + dev->obuffer[dev->olen++] = d2; + dev->ocount++; + return diolan_write_cmd(dev, flush); +} + +/* + * Flush input queue. + * If we don't do this at startup and the controller has queued up + * messages which were not retrieved, it will stop responding + * at some point. + */ +static void diolan_flush_input(struct i2c_diolan_u2c *dev) +{ + int i; + + for (i = 0; i < 10; i++) { + int actual = 0; + int ret; + + ret = usb_bulk_msg(dev->usb_dev, + usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP), + dev->ibuffer, sizeof(dev->ibuffer), &actual, + DIOLAN_USB_TIMEOUT); + if (ret < 0 || actual == 0) + break; + } + if (i == 10) + dev_err(&dev->interface->dev, "Failed to flush input buffer\n"); +} + +static int diolan_i2c_start(struct i2c_diolan_u2c *dev) +{ + return diolan_usb_cmd(dev, CMD_I2C_START, false); +} + +static int diolan_i2c_repeated_start(struct i2c_diolan_u2c *dev) +{ + return diolan_usb_cmd(dev, CMD_I2C_REPEATED_START, false); +} + +static int diolan_i2c_stop(struct i2c_diolan_u2c *dev) +{ + return diolan_usb_cmd(dev, CMD_I2C_STOP, true); +} + +static int diolan_i2c_get_byte_ack(struct i2c_diolan_u2c *dev, bool ack, + u8 *byte) +{ + int ret; + + ret = diolan_usb_cmd_data(dev, CMD_I2C_GET_BYTE_ACK, ack, true); + if (ret > 0) + *byte = dev->ibuffer[0]; + else if (ret == 0) + ret = -EIO; + + return ret; +} + +static int diolan_i2c_put_byte_ack(struct i2c_diolan_u2c *dev, u8 byte) +{ + return diolan_usb_cmd_data(dev, CMD_I2C_PUT_BYTE_ACK, byte, false); +} + +static int diolan_set_speed(struct i2c_diolan_u2c *dev, u8 speed) +{ + return diolan_usb_cmd_data(dev, CMD_I2C_SET_SPEED, speed, true); +} + +/* Enable or disable clock synchronization (stretching) */ +static int diolan_set_clock_synch(struct i2c_diolan_u2c *dev, bool enable) +{ + return diolan_usb_cmd_data(dev, CMD_I2C_SET_CLK_SYNC, enable, true); +} + +/* Set clock synchronization timeout in ms */ +static int diolan_set_clock_synch_timeout(struct i2c_diolan_u2c *dev, int ms) +{ + int to_val = ms * 10; + + return diolan_usb_cmd_data2(dev, CMD_I2C_SET_CLK_SYNC_TO, + to_val & 0xff, (to_val >> 8) & 0xff, true); +} + +static void diolan_fw_version(struct i2c_diolan_u2c *dev) +{ + int ret; + + ret = diolan_usb_cmd(dev, CMD_GET_FW_VERSION, true); + if (ret >= 2) + dev_info(&dev->interface->dev, + "Diolan U2C firmware version %u.%u\n", + (unsigned int)dev->ibuffer[0], + (unsigned int)dev->ibuffer[1]); +} + +static void diolan_get_serial(struct i2c_diolan_u2c *dev) +{ + int ret; + u32 serial; + + ret = diolan_usb_cmd(dev, CMD_GET_SERIAL, true); + if (ret >= 4) { + serial = le32_to_cpu(*(u32 *)dev->ibuffer); + dev_info(&dev->interface->dev, + "Diolan U2C serial number %u\n", serial); + } +} + +static int diolan_init(struct i2c_diolan_u2c *dev) +{ + int speed, ret; + + if (frequency >= 200000) { + speed = U2C_I2C_SPEED_FAST; + frequency = U2C_I2C_FREQ_FAST; + } else if (frequency >= 100000 || frequency == 0) { + speed = U2C_I2C_SPEED_STD; + frequency = U2C_I2C_FREQ_STD; + } else { + speed = U2C_I2C_SPEED(frequency); + if (speed > U2C_I2C_SPEED_2KHZ) + speed = U2C_I2C_SPEED_2KHZ; + frequency = U2C_I2C_FREQ(speed); + } + + dev_info(&dev->interface->dev, + "Diolan U2C at USB bus %03d address %03d speed %d Hz\n", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency); + + diolan_flush_input(dev); + diolan_fw_version(dev); + diolan_get_serial(dev); + + /* Set I2C speed */ + ret = diolan_set_speed(dev, speed); + if (ret < 0) + return ret; + + /* Configure I2C clock synchronization */ + ret = diolan_set_clock_synch(dev, speed != U2C_I2C_SPEED_FAST); + if (ret < 0) + return ret; + + if (speed != U2C_I2C_SPEED_FAST) + ret = diolan_set_clock_synch_timeout(dev, DIOLAN_SYNC_TIMEOUT); + + return ret; +} + +/* i2c layer */ + +static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, + int num) +{ + struct i2c_diolan_u2c *dev = i2c_get_adapdata(adapter); + struct i2c_msg *pmsg; + int i, j; + int ret, sret; + + ret = diolan_i2c_start(dev); + if (ret < 0) + return ret; + + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + if (i) { + ret = diolan_i2c_repeated_start(dev); + if (ret < 0) + goto abort; + } + if (pmsg->flags & I2C_M_RD) { + ret = + diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1); + if (ret < 0) + goto abort; + for (j = 0; j < pmsg->len; j++) { + u8 byte; + bool ack = j < pmsg->len - 1; + + /* + * Don't send NACK if this is the first byte + * of a SMBUS_BLOCK message. + */ + if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) + ack = true; + + ret = diolan_i2c_get_byte_ack(dev, ack, &byte); + if (ret < 0) + goto abort; + /* + * Adjust count if first received byte is length + */ + if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) { + if (byte == 0 + || byte > I2C_SMBUS_BLOCK_MAX) { + ret = -EPROTO; + goto abort; + } + pmsg->len += byte; + } + pmsg->buf[j] = byte; + } + } else { + ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1); + if (ret < 0) + goto abort; + for (j = 0; j < pmsg->len; j++) { + ret = diolan_i2c_put_byte_ack(dev, + pmsg->buf[j]); + if (ret < 0) + goto abort; + } + } + } +abort: + sret = diolan_i2c_stop(dev); + if (sret < 0 && ret >= 0) + ret = sret; + return ret; +} + +/* + * Return list of supported functionality. + */ +static u32 diolan_usb_func(struct i2c_adapter *a) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; +} + +static const struct i2c_algorithm diolan_usb_algorithm = { + .master_xfer = diolan_usb_xfer, + .functionality = diolan_usb_func, +}; + +/* device layer */ + +static const struct usb_device_id diolan_u2c_table[] = { + { USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, diolan_u2c_table); + +static void diolan_u2c_free(struct i2c_diolan_u2c *dev) +{ + usb_put_dev(dev->usb_dev); + kfree(dev); +} + +static int diolan_u2c_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct i2c_diolan_u2c *dev; + int ret; + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "no memory for device state\n"); + ret = -ENOMEM; + goto error; + } + + dev->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + /* setup i2c adapter description */ + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &diolan_usb_algorithm; + i2c_set_adapdata(&dev->adapter, dev); + snprintf(dev->adapter.name, sizeof(dev->adapter.name), + DRIVER_NAME " at bus %03d device %03d", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum); + + dev->adapter.dev.parent = &dev->interface->dev; + + /* initialize diolan i2c interface */ + ret = diolan_init(dev); + if (ret < 0) { + dev_err(&interface->dev, "failed to initialize adapter\n"); + goto error_free; + } + + /* and finally attach to i2c layer */ + ret = i2c_add_adapter(&dev->adapter); + if (ret < 0) { + dev_err(&interface->dev, "failed to add I2C adapter\n"); + goto error_free; + } + + dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n"); + + return 0; + +error_free: + usb_set_intfdata(interface, NULL); + diolan_u2c_free(dev); +error: + return ret; +} + +static void diolan_u2c_disconnect(struct usb_interface *interface) +{ + struct i2c_diolan_u2c *dev = usb_get_intfdata(interface); + + i2c_del_adapter(&dev->adapter); + usb_set_intfdata(interface, NULL); + diolan_u2c_free(dev); + + dev_dbg(&interface->dev, "disconnected\n"); +} + +static struct usb_driver diolan_u2c_driver = { + .name = DRIVER_NAME, + .probe = diolan_u2c_probe, + .disconnect = diolan_u2c_disconnect, + .id_table = diolan_u2c_table, +}; + +static int __init diolan_u2c_init(void) +{ + /* register this driver with the USB subsystem */ + return usb_register(&diolan_u2c_driver); +} + +static void __exit diolan_u2c_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&diolan_u2c_driver); +} + +module_init(diolan_u2c_init); +module_exit(diolan_u2c_exit); + +MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); +MODULE_DESCRIPTION(DRIVER_NAME " driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 50ea1f43bdc..878a12026af 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -132,6 +132,13 @@ #define pch_pci_dbg(pdev, fmt, arg...) \ dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg) +/* +Set the number of I2C instance max +Intel EG20T PCH : 1ch +OKI SEMICONDUCTOR ML7213 IOH : 2ch +*/ +#define PCH_I2C_MAX_DEV 2 + /** * struct i2c_algo_pch_data - for I2C driver functionalities * @pch_adapter: stores the reference to i2c_adapter structure @@ -156,12 +163,14 @@ struct i2c_algo_pch_data { * @pch_data: stores a list of i2c_algo_pch_data * @pch_i2c_suspended: specifies whether the system is suspended or not * perhaps with more lines and words. + * @ch_num: specifies the number of i2c instance * * pch_data has as many elements as maximum I2C channels */ struct adapter_info { - struct i2c_algo_pch_data pch_data; + struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV]; bool pch_i2c_suspended; + int ch_num; }; @@ -170,8 +179,13 @@ static int pch_clk = 50000; /* specifies I2C clock speed in KHz */ static wait_queue_head_t pch_event; static DEFINE_MUTEX(pch_mutex); +/* Definition for ML7213 by OKI SEMICONDUCTOR */ +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_ML7213_I2C 0x802D + static struct pci_device_id __devinitdata pch_pcidev_id[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_I2C)}, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, }, {0,} }; @@ -212,8 +226,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap) /* Initialize I2C registers */ iowrite32(0x21, p + PCH_I2CNF); - pch_setbit(adap->pch_base_address, PCH_I2CCTL, - PCH_I2CCTL_I2CMEN); + pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN); if (pch_i2c_speed != 400) pch_i2c_speed = 100; @@ -255,7 +268,7 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2) * @timeout: waiting time counter (us). */ static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap, - s32 timeout) + s32 timeout) { void __iomem *p = adap->pch_base_address; @@ -475,8 +488,8 @@ static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap) * @last: specifies whether last message or not. * @first: specifies whether first message or not. */ -s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, - u32 last, u32 first) +static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, + u32 last, u32 first) { struct i2c_algo_pch_data *adap = i2c_adap->algo_data; @@ -569,10 +582,10 @@ s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, } /** - * pch_i2c_cb_ch0() - Interrupt handler Call back function + * pch_i2c_cb() - Interrupt handler Call back function * @adap: Pointer to struct i2c_algo_pch_data. */ -static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap) +static void pch_i2c_cb(struct i2c_algo_pch_data *adap) { u32 sts; void __iomem *p = adap->pch_base_address; @@ -600,24 +613,30 @@ static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap) */ static irqreturn_t pch_i2c_handler(int irq, void *pData) { - s32 reg_val; - - struct i2c_algo_pch_data *adap_data = (struct i2c_algo_pch_data *)pData; - void __iomem *p = adap_data->pch_base_address; - u32 mode = ioread32(p + PCH_I2CMOD) & (BUFFER_MODE | EEPROM_SR_MODE); - - if (mode != NORMAL_MODE) { - pch_err(adap_data, "I2C mode is not supported\n"); - return IRQ_NONE; + u32 reg_val; + int flag; + int i; + struct adapter_info *adap_info = pData; + void __iomem *p; + u32 mode; + + for (i = 0, flag = 0; i < adap_info->ch_num; i++) { + p = adap_info->pch_data[i].pch_base_address; + mode = ioread32(p + PCH_I2CMOD); + mode &= BUFFER_MODE | EEPROM_SR_MODE; + if (mode != NORMAL_MODE) { + pch_err(adap_info->pch_data, + "I2C-%d mode(%d) is not supported\n", mode, i); + continue; + } + reg_val = ioread32(p + PCH_I2CSR); + if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) { + pch_i2c_cb(&adap_info->pch_data[i]); + flag = 1; + } } - reg_val = ioread32(p + PCH_I2CSR); - if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) - pch_i2c_cb_ch0(adap_data); - else - return IRQ_NONE; - - return IRQ_HANDLED; + return flag ? IRQ_HANDLED : IRQ_NONE; } /** @@ -627,7 +646,7 @@ static irqreturn_t pch_i2c_handler(int irq, void *pData) * @num: number of messages. */ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, - struct i2c_msg *msgs, s32 num) + struct i2c_msg *msgs, s32 num) { struct i2c_msg *pmsg; u32 i = 0; @@ -710,11 +729,13 @@ static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap) } static int __devinit pch_i2c_probe(struct pci_dev *pdev, - const struct pci_device_id *id) + const struct pci_device_id *id) { void __iomem *base_addr; - s32 ret; + int ret; + int i, j; struct adapter_info *adap_info; + struct i2c_adapter *pch_adap; pch_pci_dbg(pdev, "Entered.\n"); @@ -744,44 +765,48 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, goto err_pci_iomap; } - adap_info->pch_i2c_suspended = false; + /* Set the number of I2C channel instance */ + adap_info->ch_num = id->driver_data; - adap_info->pch_data.p_adapter_info = adap_info; + for (i = 0; i < adap_info->ch_num; i++) { + pch_adap = &adap_info->pch_data[i].pch_adapter; + adap_info->pch_i2c_suspended = false; - adap_info->pch_data.pch_adapter.owner = THIS_MODULE; - adap_info->pch_data.pch_adapter.class = I2C_CLASS_HWMON; - strcpy(adap_info->pch_data.pch_adapter.name, KBUILD_MODNAME); - adap_info->pch_data.pch_adapter.algo = &pch_algorithm; - adap_info->pch_data.pch_adapter.algo_data = - &adap_info->pch_data; + adap_info->pch_data[i].p_adapter_info = adap_info; - /* (i * 0x80) + base_addr; */ - adap_info->pch_data.pch_base_address = base_addr; + pch_adap->owner = THIS_MODULE; + pch_adap->class = I2C_CLASS_HWMON; + strcpy(pch_adap->name, KBUILD_MODNAME); + pch_adap->algo = &pch_algorithm; + pch_adap->algo_data = &adap_info->pch_data[i]; - adap_info->pch_data.pch_adapter.dev.parent = &pdev->dev; + /* base_addr + offset; */ + adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i; - ret = i2c_add_adapter(&(adap_info->pch_data.pch_adapter)); + pch_adap->dev.parent = &pdev->dev; - if (ret) { - pch_pci_err(pdev, "i2c_add_adapter FAILED\n"); - goto err_i2c_add_adapter; - } + ret = i2c_add_adapter(pch_adap); + if (ret) { + pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); + goto err_i2c_add_adapter; + } - pch_i2c_init(&adap_info->pch_data); + pch_i2c_init(&adap_info->pch_data[i]); + } ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, - KBUILD_MODNAME, &adap_info->pch_data); + KBUILD_MODNAME, adap_info); if (ret) { pch_pci_err(pdev, "request_irq FAILED\n"); - goto err_request_irq; + goto err_i2c_add_adapter; } pci_set_drvdata(pdev, adap_info); pch_pci_dbg(pdev, "returns %d.\n", ret); return 0; -err_request_irq: - i2c_del_adapter(&(adap_info->pch_data.pch_adapter)); err_i2c_add_adapter: + for (j = 0; j < i; j++) + i2c_del_adapter(&adap_info->pch_data[j].pch_adapter); pci_iounmap(pdev, base_addr); err_pci_iomap: pci_release_regions(pdev); @@ -794,17 +819,22 @@ err_pci_enable: static void __devexit pch_i2c_remove(struct pci_dev *pdev) { + int i; struct adapter_info *adap_info = pci_get_drvdata(pdev); - pch_i2c_disbl_int(&adap_info->pch_data); - free_irq(pdev->irq, &adap_info->pch_data); - i2c_del_adapter(&(adap_info->pch_data.pch_adapter)); + free_irq(pdev->irq, adap_info); - if (adap_info->pch_data.pch_base_address) { - pci_iounmap(pdev, adap_info->pch_data.pch_base_address); - adap_info->pch_data.pch_base_address = 0; + for (i = 0; i < adap_info->ch_num; i++) { + pch_i2c_disbl_int(&adap_info->pch_data[i]); + i2c_del_adapter(&adap_info->pch_data[i].pch_adapter); } + if (adap_info->pch_data[0].pch_base_address) + pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address); + + for (i = 0; i < adap_info->ch_num; i++) + adap_info->pch_data[i].pch_base_address = 0; + pci_set_drvdata(pdev, NULL); pci_release_regions(pdev); @@ -817,17 +847,22 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev) static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) { int ret; + int i; struct adapter_info *adap_info = pci_get_drvdata(pdev); - void __iomem *p = adap_info->pch_data.pch_base_address; + void __iomem *p = adap_info->pch_data[0].pch_base_address; adap_info->pch_i2c_suspended = true; - while ((adap_info->pch_data.pch_i2c_xfer_in_progress)) { - /* Wait until all channel transfers are completed */ - msleep(20); + for (i = 0; i < adap_info->ch_num; i++) { + while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) { + /* Wait until all channel transfers are completed */ + msleep(20); + } } + /* Disable the i2c interrupts */ - pch_i2c_disbl_int(&adap_info->pch_data); + for (i = 0; i < adap_info->ch_num; i++) + pch_i2c_disbl_int(&adap_info->pch_data[i]); pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x " "invoked function pch_i2c_disbl_int successfully\n", @@ -850,6 +885,7 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) static int pch_i2c_resume(struct pci_dev *pdev) { + int i; struct adapter_info *adap_info = pci_get_drvdata(pdev); pci_set_power_state(pdev, PCI_D0); @@ -862,7 +898,8 @@ static int pch_i2c_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); - pch_i2c_init(&adap_info->pch_data); + for (i = 0; i < adap_info->ch_num; i++) + pch_i2c_init(&adap_info->pch_data[i]); adap_info->pch_i2c_suspended = false; @@ -894,7 +931,7 @@ static void __exit pch_pci_exit(void) } module_exit(pch_pci_exit); -MODULE_DESCRIPTION("PCH I2C PCI Driver"); +MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.okisemi.com>"); module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 8022e2390a5..caf96dc8ca1 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -118,6 +118,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) { mxs_reset_block(i2c->regs); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + i2c->regs + MXS_I2C_QUEUECTRL_SET); } static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, @@ -347,8 +349,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) /* Do reset to enforce correct startup after pinmuxing */ mxs_i2c_reset(i2c); - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_SET); adap = &i2c->adapter; strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name)); diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c new file mode 100644 index 00000000000..6659d269b84 --- /dev/null +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -0,0 +1,176 @@ +/* + * The CE4100's I2C device is more or less the same one as found on PXA. + * It does not support slave mode, the register slightly moved. This PCI + * device provides three bars, every contains a single I2C controller. + */ +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/i2c/pxa-i2c.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> + +#define CE4100_PCI_I2C_DEVS 3 + +struct ce4100_devices { + struct platform_device *pdev[CE4100_PCI_I2C_DEVS]; +}; + +static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar) +{ + struct platform_device *pdev; + struct i2c_pxa_platform_data pdata; + struct resource res[2]; + struct device_node *child; + static int devnum; + int ret; + + memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data)); + memset(&res, 0, sizeof(res)); + + res[0].flags = IORESOURCE_MEM; + res[0].start = pci_resource_start(dev, bar); + res[0].end = pci_resource_end(dev, bar); + + res[1].flags = IORESOURCE_IRQ; + res[1].start = dev->irq; + res[1].end = dev->irq; + + for_each_child_of_node(dev->dev.of_node, child) { + const void *prop; + struct resource r; + int ret; + + ret = of_address_to_resource(child, 0, &r); + if (ret < 0) + continue; + if (r.start != res[0].start) + continue; + if (r.end != res[0].end) + continue; + if (r.flags != res[0].flags) + continue; + + prop = of_get_property(child, "fast-mode", NULL); + if (prop) + pdata.fast_mode = 1; + + break; + } + + if (!child) { + dev_err(&dev->dev, "failed to match a DT node for bar %d.\n", + bar); + ret = -EINVAL; + goto out; + } + + pdev = platform_device_alloc("ce4100-i2c", devnum); + if (!pdev) { + of_node_put(child); + ret = -ENOMEM; + goto out; + } + pdev->dev.parent = &dev->dev; + pdev->dev.of_node = child; + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret) + goto err; + + ret = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (ret) + goto err; + + ret = platform_device_add(pdev); + if (ret) + goto err; + devnum++; + return pdev; +err: + platform_device_put(pdev); +out: + return ERR_PTR(ret); +} + +static int __devinit ce4100_i2c_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int ret; + int i; + struct ce4100_devices *sds; + + ret = pci_enable_device_mem(dev); + if (ret) + return ret; + + if (!dev->dev.of_node) { + dev_err(&dev->dev, "Missing device tree node.\n"); + return -EINVAL; + } + sds = kzalloc(sizeof(*sds), GFP_KERNEL); + if (!sds) + goto err_mem; + + for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) { + sds->pdev[i] = add_i2c_device(dev, i); + if (IS_ERR(sds->pdev[i])) { + while (--i >= 0) + platform_device_unregister(sds->pdev[i]); + goto err_dev_add; + } + } + pci_set_drvdata(dev, sds); + return 0; + +err_dev_add: + pci_set_drvdata(dev, NULL); + kfree(sds); +err_mem: + pci_disable_device(dev); + return ret; +} + +static void __devexit ce4100_i2c_remove(struct pci_dev *dev) +{ + struct ce4100_devices *sds; + unsigned int i; + + sds = pci_get_drvdata(dev); + pci_set_drvdata(dev, NULL); + + for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) + platform_device_unregister(sds->pdev[i]); + + pci_disable_device(dev); + kfree(sds); +} + +static struct pci_device_id ce4100_i2c_devices[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)}, + { }, +}; +MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices); + +static struct pci_driver ce4100_i2c_driver = { + .name = "ce4100_i2c", + .id_table = ce4100_i2c_devices, + .probe = ce4100_i2c_probe, + .remove = __devexit_p(ce4100_i2c_remove), +}; + +static int __init ce4100_i2c_init(void) +{ + return pci_register_driver(&ce4100_i2c_driver); +} +module_init(ce4100_i2c_init); + +static void __exit ce4100_i2c_exit(void) +{ + pci_unregister_driver(&ce4100_i2c_driver); +} +module_exit(ce4100_i2c_exit); + +MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index f4c19a97e0b..f59224a5c76 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -29,38 +29,75 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/i2c-pxa.h> +#include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/slab.h> #include <linux/io.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/irq.h> -#include <plat/i2c.h> + +#ifndef CONFIG_HAVE_CLK +#define clk_get(dev, id) NULL +#define clk_put(clk) do { } while (0) +#define clk_disable(clk) do { } while (0) +#define clk_enable(clk) do { } while (0) +#endif + +struct pxa_reg_layout { + u32 ibmr; + u32 idbr; + u32 icr; + u32 isr; + u32 isar; +}; + +enum pxa_i2c_types { + REGS_PXA2XX, + REGS_PXA3XX, + REGS_CE4100, +}; /* - * I2C register offsets will be shifted 0 or 1 bit left, depending on - * different SoCs + * I2C registers definitions */ -#define REG_SHIFT_0 (0 << 0) -#define REG_SHIFT_1 (1 << 0) -#define REG_SHIFT(d) ((d) & 0x1) +static struct pxa_reg_layout pxa_reg_layout[] = { + [REGS_PXA2XX] = { + .ibmr = 0x00, + .idbr = 0x08, + .icr = 0x10, + .isr = 0x18, + .isar = 0x20, + }, + [REGS_PXA3XX] = { + .ibmr = 0x00, + .idbr = 0x04, + .icr = 0x08, + .isr = 0x0c, + .isar = 0x10, + }, + [REGS_CE4100] = { + .ibmr = 0x14, + .idbr = 0x0c, + .icr = 0x00, + .isr = 0x04, + /* no isar register */ + }, +}; static const struct platform_device_id i2c_pxa_id_table[] = { - { "pxa2xx-i2c", REG_SHIFT_1 }, - { "pxa3xx-pwri2c", REG_SHIFT_0 }, + { "pxa2xx-i2c", REGS_PXA2XX }, + { "pxa3xx-pwri2c", REGS_PXA3XX }, + { "ce4100-i2c", REGS_CE4100 }, { }, }; MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); /* - * I2C registers and bit definitions + * I2C bit definitions */ -#define IBMR (0x00) -#define IDBR (0x08) -#define ICR (0x10) -#define ISR (0x18) -#define ISAR (0x20) #define ICR_START (1 << 0) /* start bit */ #define ICR_STOP (1 << 1) /* stop bit */ @@ -111,7 +148,11 @@ struct pxa_i2c { u32 icrlog[32]; void __iomem *reg_base; - unsigned int reg_shift; + void __iomem *reg_ibmr; + void __iomem *reg_idbr; + void __iomem *reg_icr; + void __iomem *reg_isr; + void __iomem *reg_isar; unsigned long iobase; unsigned long iosize; @@ -121,11 +162,11 @@ struct pxa_i2c { unsigned int fast_mode :1; }; -#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift)) -#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift)) -#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift)) -#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift)) -#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift)) +#define _IBMR(i2c) ((i2c)->reg_ibmr) +#define _IDBR(i2c) ((i2c)->reg_idbr) +#define _ICR(i2c) ((i2c)->reg_icr) +#define _ISR(i2c) ((i2c)->reg_isr) +#define _ISAR(i2c) ((i2c)->reg_isar) /* * I2C Slave mode address @@ -418,7 +459,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) writel(I2C_ISR_INIT, _ISR(i2c)); writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); - writel(i2c->slave_addr, _ISAR(i2c)); + if (i2c->reg_isar) + writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); @@ -729,8 +771,10 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) */ ret = i2c->msg_idx; - if (timeout == 0) + if (!timeout && i2c->msg_num) { i2c_pxa_scream_blue_murder(i2c, "timeout"); + ret = I2C_RETRY; + } out: return ret; @@ -915,11 +959,16 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) writel(icr, _ICR(i2c)); } +#define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \ + ISR_SAD | ISR_BED) static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) { struct pxa_i2c *i2c = dev_id; u32 isr = readl(_ISR(i2c)); + if (!(isr & VALID_INT_SOURCE)) + return IRQ_NONE; + if (i2c_debug > 2 && 0) { dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); @@ -934,7 +983,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) /* * Always clear all pending IRQs. */ - writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c)); + writel(isr & VALID_INT_SOURCE, _ISR(i2c)); if (isr & ISR_SAD) i2c_pxa_slave_start(i2c, isr); @@ -1001,6 +1050,7 @@ static int i2c_pxa_probe(struct platform_device *dev) struct resource *res; struct i2c_pxa_platform_data *plat = dev->dev.platform_data; const struct platform_device_id *id = platform_get_device_id(dev); + enum pxa_i2c_types i2c_type = id->driver_data; int ret; int irq; @@ -1044,7 +1094,13 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = -EIO; goto eremap; } - i2c->reg_shift = REG_SHIFT(id->driver_data); + + i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; + i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; + i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; + i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; + if (i2c_type != REGS_CE4100) + i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; i2c->iobase = res->start; i2c->iosize = resource_size(res); @@ -1072,7 +1128,7 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; - ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, + ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED, i2c->adap.name, i2c); if (ret) goto ereqirq; @@ -1082,12 +1138,19 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &dev->dev; +#ifdef CONFIG_OF + i2c->adap.dev.of_node = dev->dev.of_node; +#endif - ret = i2c_add_numbered_adapter(&i2c->adap); + if (i2c_type == REGS_CE4100) + ret = i2c_add_adapter(&i2c->adap); + else + ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); goto eadapt; } + of_i2c_register_devices(&i2c->adap); platform_set_drvdata(dev, i2c); diff --git a/arch/arm/plat-pxa/include/plat/i2c.h b/include/linux/i2c/pxa-i2c.h index 1a9f65e6ec0..1a9f65e6ec0 100644 --- a/arch/arm/plat-pxa/include/plat/i2c.h +++ b/include/linux/i2c/pxa-i2c.h |