diff options
250 files changed, 17265 insertions, 2100 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 82e418d648d..7f5fc3ba9c9 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -20,6 +20,8 @@ Samsung-S3C24XX - S3C24XX ARM Linux Overview Sharp-LH - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC) +SPEAr + - ST SPEAr platform Linux Overview VFP/ - Release notes for Linux Kernel Vector Floating Point support code empeg/ diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt new file mode 100644 index 00000000000..253a35c6f78 --- /dev/null +++ b/Documentation/arm/SPEAr/overview.txt @@ -0,0 +1,60 @@ + SPEAr ARM Linux Overview + ========================== + +Introduction +------------ + + SPEAr (Structured Processor Enhanced Architecture). + weblink : http://www.st.com/spear + + The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are + supported by the 'spear' platform of ARM Linux. Currently SPEAr300, + SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX + series is in progress. + + Hierarchy in SPEAr is as follows: + + SPEAr (Platform) + - SPEAr3XX (3XX SOC series, based on ARM9) + - SPEAr300 (SOC) + - SPEAr300_EVB (Evaluation Board) + - SPEAr310 (SOC) + - SPEAr310_EVB (Evaluation Board) + - SPEAr320 (SOC) + - SPEAr320_EVB (Evaluation Board) + - SPEAr6XX (6XX SOC series, based on ARM9) + - SPEAr600 (SOC) + - SPEAr600_EVB (Evaluation Board) + - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) + - SPEAr1300 (SOC) + + Configuration + ------------- + + A generic configuration is provided for each machine, and can be used as the + default by + make spear600_defconfig + make spear300_defconfig + make spear310_defconfig + make spear320_defconfig + + Layout + ------ + + The common files for multiple machine families (SPEAr3XX, SPEAr6XX and + SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + with headers in plat/. + + Each machine series have a directory with name arch/arm/mach-spear followed by + series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. + + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for + spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine + specific files, like spear300.c, spear310.c, spear320.c and spear600.c. + mach-spear* also contains board specific files for each machine type. + + + Document Author + --------------- + + Viresh Kumar, (c) 2010 ST Microelectronics diff --git a/MAINTAINERS b/MAINTAINERS index 382eaa4d006..aa18ca333f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5229,6 +5229,46 @@ F: drivers/serial/sunsu.c F: drivers/serial/sunzilog.c F: drivers/serial/sunzilog.h +SPEAR PLATFORM SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/plat-spear/ + +SPEAR3XX MACHINE SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear3xx/ + +SPEAR6XX MACHINE SUPPORT +M: Rajeev Kumar <rajeev-dlh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear6xx/ + +SPEAR CLOCK FRAMEWORK SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear*/clock.c +F: arch/arm/mach-spear*/include/mach/clkdev.h +F: arch/arm/plat-spear/clock.c +F: arch/arm/plat-spear/include/plat/clock.h and clkdev.h + +SPEAR PAD MULTIPLEXING SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/plat-spear/include/plat/padmux.h +F: arch/arm/plat-spear/padmux.c +F: arch/arm/mach-spear*/spear*xx.c +F: arch/arm/mach-spear*/include/mach/generic.h +F: arch/arm/mach-spear3xx/spear3*0.c +F: arch/arm/mach-spear3xx/spear3*0_evb.c +F: arch/arm/mach-spear6xx/spear600.c +F: arch/arm/mach-spear6xx/spear600_evb.c + SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER M: Roger Wolff <R.E.Wolff@BitWizard.nl> S: Supported diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5408bf1bf4..daaa4b2b46e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -21,6 +21,7 @@ config ARM select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO + select HAVE_KERNEL_LZMA select HAVE_PERF_EVENTS select PERF_USE_VMALLOC help @@ -42,6 +43,11 @@ config GENERIC_GPIO config GENERIC_TIME bool + default y + +config ARCH_USES_GETTIMEOFFSET + bool + default n config GENERIC_CLOCKEVENTS bool @@ -231,6 +237,7 @@ config ARCH_AAEC2000 select CPU_ARM920T select ARM_AMBA select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Agilent AAEC-2000 @@ -238,21 +245,24 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select HAVE_CLK select COMMON_CLKDEV - select ICST525 + select ICST + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select PLAT_VERSATILE help Support for ARM's Integrator platform. config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA - select HAVE_CLK select COMMON_CLKDEV - select ICST307 + select ICST select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select PLAT_VERSATILE + select ARM_TIMER_SP804 help This enables support for ARM Ltd RealView boards. @@ -260,20 +270,36 @@ config ARCH_VERSATILE bool "ARM Ltd. Versatile family" select ARM_AMBA select ARM_VIC - select HAVE_CLK select COMMON_CLKDEV - select ICST307 + select ICST select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select PLAT_VERSATILE + select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. +config ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + select GENERIC_TIME + select HAVE_CLK + select ICST + select PLAT_VERSATILE + help + This enables support for the ARM Ltd Versatile Express boards. + config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -293,6 +319,7 @@ config ARCH_BCMRING config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T + select ARCH_USES_GETTIMEOFFSET help Support for Cirrus Logic 711x/721x based boards. @@ -301,6 +328,7 @@ config ARCH_GEMINI select CPU_FA526 select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for the Cortina Systems Gemini family SoCs @@ -309,6 +337,7 @@ config ARCH_EBSA110 select CPU_SA110 select ISA select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -321,10 +350,10 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_USES_GETTIMEOFFSET help This enables support for the Cirrus EP93xx series of CPUs. @@ -332,6 +361,7 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE + select ARCH_USES_GETTIMEOFFSET help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -341,7 +371,6 @@ config ARCH_MXC select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select COMMON_CLKDEV help Support for Freescale MXC/iMX-based family of processors @@ -349,7 +378,6 @@ config ARCH_MXC config ARCH_STMP3XXX bool "Freescale STMP3xxx" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME @@ -372,6 +400,7 @@ config ARCH_H720X bool "Hynix HMS720x-based" select CPU_ARM720T select ISA_DMA_API + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Hynix HMS720x @@ -414,6 +443,7 @@ config ARCH_IXP23XX depends on MMU select CPU_XSC3 select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP23xx (XScale) family of processors. @@ -422,6 +452,7 @@ config ARCH_IXP2000 depends on MMU select CPU_XSCALE select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -440,6 +471,7 @@ config ARCH_L7200 bool "LinkUp-L7200" select CPU_ARM720T select FIQ + select ARCH_USES_GETTIMEOFFSET help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -516,7 +548,6 @@ config ARCH_MMP depends on MMU select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -530,6 +561,7 @@ config ARCH_KS8695 select CPU_ARM922T select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -552,7 +584,6 @@ config ARCH_W90X900 select CPU_ARM926T select ARCH_REQUIRE_GPIOLIB select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -568,7 +599,6 @@ config ARCH_W90X900 config ARCH_NUC93X bool "Nuvoton NUC93X CPU" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV help Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a @@ -577,8 +607,8 @@ config ARCH_NUC93X config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV + select ARCH_USES_GETTIMEOFFSET help This enables support for Philips PNX4008 mobile platform. @@ -588,7 +618,6 @@ config ARCH_PXA select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME @@ -624,6 +653,7 @@ config ARCH_RPC select ISA_DMA_API select NO_IOPORT select ARCH_SPARSEMEM_ENABLE + select ARCH_USES_GETTIMEOFFSET help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -650,6 +680,7 @@ config ARCH_S3C2410 select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -663,6 +694,7 @@ config ARCH_S3C64XX select ARM_VIC select HAVE_CLK select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select SAMSUNG_CLKSRC @@ -719,6 +751,7 @@ config ARCH_SHARK select ISA_DMA select ZONE_DMA select PCI + select ARCH_USES_GETTIMEOFFSET help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -728,6 +761,7 @@ config ARCH_LH7A40X select CPU_ARM922T select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM + select ARCH_USES_GETTIMEOFFSET help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T @@ -743,7 +777,6 @@ config ARCH_U300 select ARM_VIC select GENERIC_TIME select GENERIC_CLOCKEVENTS - select HAVE_CLK select COMMON_CLKDEV select GENERIC_GPIO help @@ -756,6 +789,7 @@ config ARCH_U8500 select GENERIC_TIME select GENERIC_CLOCKEVENTS select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB help Support for ST-Ericsson's Ux500 architecture @@ -764,7 +798,6 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -780,7 +813,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV @@ -801,6 +833,18 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). +config PLAT_SPEAR + bool "ST SPEAr" + select ARM_AMBA + select ARCH_REQUIRE_GPIOLIB + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select GENERIC_TIME + select HAVE_CLK + help + Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + endchoice # @@ -886,6 +930,7 @@ source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-s5pc1xx/Kconfig" +source "arch/arm/plat-spear/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" @@ -919,6 +964,8 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-vexpress/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -936,6 +983,12 @@ config PLAT_ORION config PLAT_PXA bool +config PLAT_VERSATILE + bool + +config ARM_TIMER_SP804 + bool + source arch/arm/mm/Kconfig config IWMMXT @@ -1064,6 +1117,10 @@ config PCI your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or VESA. If you have PCI, say Y, otherwise N. +config PCI_DOMAINS + bool + depends on PCI + config PCI_SYSCALL def_bool PCI @@ -1092,10 +1149,11 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ + ARCH_U8500 || ARCH_VEXPRESS_CA9X4) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ed820e737a8..219cb4ee7e3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -175,9 +175,14 @@ machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_ARCH_NUC93X) := nuc93x machine-$(CONFIG_FOOTBRIDGE) := footbridge +machine-$(CONFIG_MACH_SPEAR300) := spear3xx +machine-$(CONFIG_MACH_SPEAR310) := spear3xx +machine-$(CONFIG_MACH_SPEAR320) := spear3xx +machine-$(CONFIG_MACH_SPEAR600) := spear6xx # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. @@ -192,6 +197,8 @@ plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung plat-$(CONFIG_PLAT_S5P) := s5p samsung +plat-$(CONFIG_PLAT_SPEAR) := spear +plat-$(CONFIG_PLAT_VERSATILE) := versatile ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 97c89e7de7d..53faa9063a0 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -65,6 +65,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo +suffix_$(CONFIG_KERNEL_LZMA) = lzma targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index 9c097073ce4..4c72a97bc3e 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -40,6 +40,10 @@ extern void error(char *); #include "../../../../lib/decompress_unlzo.c" #endif +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) { decompress(input, len, NULL, NULL, output, NULL, error); diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S new file mode 100644 index 00000000000..d7e69cffbc0 --- /dev/null +++ b/arch/arm/boot/compressed/piggy.lzma.S @@ -0,0 +1,6 @@ + .section .piggydata,#alloc + .globl input_data +input_data: + .incbin "arch/arm/boot/compressed/piggy.lzma" + .globl input_data_end +input_data_end: diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 4efbb9df044..0a34c818692 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -12,10 +12,10 @@ config ARM_VIC_NR The maximum number of VICs available in the system, for power management. -config ICST525 +config ICST bool -config ICST307 +config PL330 bool config SA1111 @@ -40,3 +40,4 @@ config SHARP_SCOOP config COMMON_CLKDEV bool + select HAVE_CLK diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 76be7ff2a7c..e6e8664a941 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -4,8 +4,8 @@ obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o -obj-$(CONFIG_ICST525) += icst525.o -obj-$(CONFIG_ICST307) += icst307.o +obj-$(CONFIG_ICST) += icst.o +obj-$(CONFIG_PL330) += pl330.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 6416d5b5020..4f8390dd6ca 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -52,12 +52,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) continue; match += 1; } - if (match == 0) - continue; if (match > best) { clk = p->clk; - best = match; + if (match != 3) + best = match; + else + break; } } return clk; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c new file mode 100644 index 00000000000..9a7f09cff30 --- /dev/null +++ b/arch/arm/common/icst.c @@ -0,0 +1,100 @@ +/* + * linux/arch/arm/common/icst307.c + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST307 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + * + * This is an almost identical implementation to the ICST525 clock generator. + * The s2div and idx2s files are different + */ +#include <linux/module.h> +#include <linux/kernel.h> + +#include <asm/hardware/icst.h> + +/* + * Divisors for each OD setting. + */ +const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 }; +const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 }; +EXPORT_SYMBOL(icst307_s2div); +EXPORT_SYMBOL(icst525_s2div); + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) +{ + return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); +} + +EXPORT_SYMBOL(icst_hz); + +/* + * Ascending divisor S values. + */ +const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 }; +const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 }; +EXPORT_SYMBOL(icst307_idx2s); +EXPORT_SYMBOL(icst525_idx2s); + +struct icst_vco +icst_hz_to_vco(const struct icst_params *p, unsigned long freq) +{ + struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; + unsigned long f; + unsigned int i = 0, rd, best = (unsigned int)-1; + + /* + * First, find the PLL output divisor such + * that the PLL output is within spec. + */ + do { + f = freq * p->s2div[p->idx2s[i]]; + + if (f > p->vco_min && f <= p->vco_max) + break; + } while (i < 8); + + if (i >= 8) + return vco; + + vco.s = p->idx2s[i]; + + /* + * Now find the closest divisor combination + * which gives a PLL output of 'f'. + */ + for (rd = p->rd_min; rd <= p->rd_max; rd++) { + unsigned long fref_div, f_pll; + unsigned int vd; + int f_diff; + + fref_div = (2 * p->ref) / rd; + + vd = (f + fref_div / 2) / fref_div; + if (vd < p->vd_min || vd > p->vd_max) + continue; + + f_pll = fref_div * vd; + f_diff = f_pll - f; + if (f_diff < 0) + f_diff = -f_diff; + + if ((unsigned)f_diff < best) { + vco.v = vd - 8; + vco.r = rd - 2; + if (f_diff == 0) + break; + best = f_diff; + } + } + + return vco; +} + +EXPORT_SYMBOL(icst_hz_to_vco); diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c deleted file mode 100644 index 6d094c15754..00000000000 --- a/arch/arm/common/icst307.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/arch/arm/common/icst307.c - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This is an almost identical implementation to the ICST525 clock generator. - * The s2div and idx2s files are different - */ -#include <linux/module.h> -#include <linux/kernel.h> - -#include <asm/hardware/icst307.h> - -/* - * Divisors for each OD setting. - */ -static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 }; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco) -{ - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]); -} - -EXPORT_SYMBOL(icst307_khz); - -/* - * Ascending divisor S values. - */ -static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 }; - -struct icst307_vco -icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq) -{ - struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f; - unsigned int i = 0, rd, best = (unsigned int)-1; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = freq * s2div[idx2s[i]]; - - /* - * f must be between 6MHz and 200MHz (3.3 or 5V) - */ - if (f > 6000 && f <= p->vco_max) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long fref_div, f_pll; - unsigned int vd; - int f_diff; - - fref_div = (2 * p->ref) / rd; - - vd = (f + fref_div / 2) / fref_div; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = fref_div * vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst307_khz_to_vco); - -struct icst307_vco -icst307_ps_to_vco(const struct icst307_params *p, unsigned long period) -{ - struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f, ps; - unsigned int i = 0, rd, best = (unsigned int)-1; - - ps = 1000000000UL / p->vco_max; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = period / s2div[idx2s[i]]; - - /* - * f must be between 6MHz and 200MHz (3.3 or 5V) - */ - if (f >= ps && f < 1000000000UL / 6000 + 1) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - ps = 500000000UL / p->ref; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long f_in_div, f_pll; - unsigned int vd; - int f_diff; - - f_in_div = ps * rd; - - vd = (f_in_div + f / 2) / f; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = (f_in_div + vd / 2) / vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst307_ps_to_vco); diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c deleted file mode 100644 index 3d377c5bdef..00000000000 --- a/arch/arm/common/icst525.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * linux/arch/arm/common/icst525.c - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#include <linux/module.h> -#include <linux/kernel.h> - -#include <asm/hardware/icst525.h> - -/* - * Divisors for each OD setting. - */ -static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 }; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco) -{ - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]); -} - -EXPORT_SYMBOL(icst525_khz); - -/* - * Ascending divisor S values. - */ -static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 }; - -struct icst525_vco -icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq) -{ - struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f; - unsigned int i = 0, rd, best = (unsigned int)-1; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = freq * s2div[idx2s[i]]; - - /* - * f must be between 10MHz and - * 320MHz (5V) or 200MHz (3V) - */ - if (f > 10000 && f <= p->vco_max) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long fref_div, f_pll; - unsigned int vd; - int f_diff; - - fref_div = (2 * p->ref) / rd; - - vd = (f + fref_div / 2) / fref_div; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = fref_div * vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst525_khz_to_vco); - -struct icst525_vco -icst525_ps_to_vco(const struct icst525_params *p, unsigned long period) -{ - struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f, ps; - unsigned int i = 0, rd, best = (unsigned int)-1; - - ps = 1000000000UL / p->vco_max; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = period / s2div[idx2s[i]]; - - /* - * f must be between 10MHz and - * 320MHz (5V) or 200MHz (3V) - */ - if (f >= ps && f < 100000) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - ps = 500000000UL / p->ref; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long f_in_div, f_pll; - unsigned int vd; - int f_diff; - - f_in_div = ps * rd; - - vd = (f_in_div + f / 2) / f; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = (f_in_div + vd / 2) / vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst525_ps_to_vco); diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c new file mode 100644 index 00000000000..5ebbab6242a --- /dev/null +++ b/arch/arm/common/pl330.c @@ -0,0 +1,1966 @@ +/* linux/arch/arm/common/pl330.c + * + * Copyright (C) 2010 Samsung Electronics Co Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> + +#include <asm/hardware/pl330.h> + +/* Register and Bit field Definitions */ +#define DS 0x0 +#define DS_ST_STOP 0x0 +#define DS_ST_EXEC 0x1 +#define DS_ST_CMISS 0x2 +#define DS_ST_UPDTPC 0x3 +#define DS_ST_WFE 0x4 +#define DS_ST_ATBRR 0x5 +#define DS_ST_QBUSY 0x6 +#define DS_ST_WFP 0x7 +#define DS_ST_KILL 0x8 +#define DS_ST_CMPLT 0x9 +#define DS_ST_FLTCMP 0xe +#define DS_ST_FAULT 0xf + +#define DPC 0x4 +#define INTEN 0x20 +#define ES 0x24 +#define INTSTATUS 0x28 +#define INTCLR 0x2c +#define FSM 0x30 +#define FSC 0x34 +#define FTM 0x38 + +#define _FTC 0x40 +#define FTC(n) (_FTC + (n)*0x4) + +#define _CS 0x100 +#define CS(n) (_CS + (n)*0x8) +#define CS_CNS (1 << 21) + +#define _CPC 0x104 +#define CPC(n) (_CPC + (n)*0x8) + +#define _SA 0x400 +#define SA(n) (_SA + (n)*0x20) + +#define _DA 0x404 +#define DA(n) (_DA + (n)*0x20) + +#define _CC 0x408 +#define CC(n) (_CC + (n)*0x20) + +#define CC_SRCINC (1 << 0) +#define CC_DSTINC (1 << 14) +#define CC_SRCPRI (1 << 8) +#define CC_DSTPRI (1 << 22) +#define CC_SRCNS (1 << 9) +#define CC_DSTNS (1 << 23) +#define CC_SRCIA (1 << 10) +#define CC_DSTIA (1 << 24) +#define CC_SRCBRSTLEN_SHFT 4 +#define CC_DSTBRSTLEN_SHFT 18 +#define CC_SRCBRSTSIZE_SHFT 1 +#define CC_DSTBRSTSIZE_SHFT 15 +#define CC_SRCCCTRL_SHFT 11 +#define CC_SRCCCTRL_MASK 0x7 +#define CC_DSTCCTRL_SHFT 25 +#define CC_DRCCCTRL_MASK 0x7 +#define CC_SWAP_SHFT 28 + +#define _LC0 0x40c +#define LC0(n) (_LC0 + (n)*0x20) + +#define _LC1 0x410 +#define LC1(n) (_LC1 + (n)*0x20) + +#define DBGSTATUS 0xd00 +#define DBG_BUSY (1 << 0) + +#define DBGCMD 0xd04 +#define DBGINST0 0xd08 +#define DBGINST1 0xd0c + +#define CR0 0xe00 +#define CR1 0xe04 +#define CR2 0xe08 +#define CR3 0xe0c +#define CR4 0xe10 +#define CRD 0xe14 + +#define PERIPH_ID 0xfe0 +#define PCELL_ID 0xff0 + +#define CR0_PERIPH_REQ_SET (1 << 0) +#define CR0_BOOT_EN_SET (1 << 1) +#define CR0_BOOT_MAN_NS (1 << 2) +#define CR0_NUM_CHANS_SHIFT 4 +#define CR0_NUM_CHANS_MASK 0x7 +#define CR0_NUM_PERIPH_SHIFT 12 +#define CR0_NUM_PERIPH_MASK 0x1f +#define CR0_NUM_EVENTS_SHIFT 17 +#define CR0_NUM_EVENTS_MASK 0x1f + +#define CR1_ICACHE_LEN_SHIFT 0 +#define CR1_ICACHE_LEN_MASK 0x7 +#define CR1_NUM_ICACHELINES_SHIFT 4 +#define CR1_NUM_ICACHELINES_MASK 0xf + +#define CRD_DATA_WIDTH_SHIFT 0 +#define CRD_DATA_WIDTH_MASK 0x7 +#define CRD_WR_CAP_SHIFT 4 +#define CRD_WR_CAP_MASK 0x7 +#define CRD_WR_Q_DEP_SHIFT 8 +#define CRD_WR_Q_DEP_MASK 0xf +#define CRD_RD_CAP_SHIFT 12 +#define CRD_RD_CAP_MASK 0x7 +#define CRD_RD_Q_DEP_SHIFT 16 +#define CRD_RD_Q_DEP_MASK 0xf +#define CRD_DATA_BUFF_SHIFT 20 +#define CRD_DATA_BUFF_MASK 0x3ff + +#define PART 0x330 +#define DESIGNER 0x41 +#define REVISION 0x0 +#define INTEG_CFG 0x0 +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \ + | (REVISION << 20) | (INTEG_CFG << 24)) + +#define PCELL_ID_VAL 0xb105f00d + +#define PL330_STATE_STOPPED (1 << 0) +#define PL330_STATE_EXECUTING (1 << 1) +#define PL330_STATE_WFE (1 << 2) +#define PL330_STATE_FAULTING (1 << 3) +#define PL330_STATE_COMPLETING (1 << 4) +#define PL330_STATE_WFP (1 << 5) +#define PL330_STATE_KILLING (1 << 6) +#define PL330_STATE_FAULT_COMPLETING (1 << 7) +#define PL330_STATE_CACHEMISS (1 << 8) +#define PL330_STATE_UPDTPC (1 << 9) +#define PL330_STATE_ATBARRIER (1 << 10) +#define PL330_STATE_QUEUEBUSY (1 << 11) +#define PL330_STATE_INVALID (1 << 15) + +#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ + | PL330_STATE_WFE | PL330_STATE_FAULTING) + +#define CMD_DMAADDH 0x54 +#define CMD_DMAEND 0x00 +#define CMD_DMAFLUSHP 0x35 +#define CMD_DMAGO 0xa0 +#define CMD_DMALD 0x04 +#define CMD_DMALDP 0x25 +#define CMD_DMALP 0x20 +#define CMD_DMALPEND 0x28 +#define CMD_DMAKILL 0x01 +#define CMD_DMAMOV 0xbc +#define CMD_DMANOP 0x18 +#define CMD_DMARMB 0x12 +#define CMD_DMASEV 0x34 +#define CMD_DMAST 0x08 +#define CMD_DMASTP 0x29 +#define CMD_DMASTZ 0x0c +#define CMD_DMAWFE 0x36 +#define CMD_DMAWFP 0x30 +#define CMD_DMAWMB 0x13 + +#define SZ_DMAADDH 3 +#define SZ_DMAEND 1 +#define SZ_DMAFLUSHP 2 +#define SZ_DMALD 1 +#define SZ_DMALDP 2 +#define SZ_DMALP 2 +#define SZ_DMALPEND 2 +#define SZ_DMAKILL 1 +#define SZ_DMAMOV 6 +#define SZ_DMANOP 1 +#define SZ_DMARMB 1 +#define SZ_DMASEV 2 +#define SZ_DMAST 1 +#define SZ_DMASTP 2 +#define SZ_DMASTZ 1 +#define SZ_DMAWFE 2 +#define SZ_DMAWFP 2 +#define SZ_DMAWMB 1 +#define SZ_DMAGO 6 + +#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) +#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) + +#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) +#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) + +/* + * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req + * at 1byte/burst for P<->M and M<->M respectively. + * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req + * should be enough for P<->M and M<->M respectively. + */ +#define MCODE_BUFF_PER_REQ 256 + +/* + * Mark a _pl330_req as free. + * We do it by writing DMAEND as the first instruction + * because no valid request is going to have DMAEND as + * its first instruction to execute. + */ +#define MARK_FREE(req) do { \ + _emit_END(0, (req)->mc_cpu); \ + (req)->mc_len = 0; \ + } while (0) + +/* If the _pl330_req is available to the client */ +#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) + +/* Use this _only_ to wait on transient states */ +#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); + +#ifdef PL330_DEBUG_MCGEN +static unsigned cmd_line; +#define PL330_DBGCMD_DUMP(off, x...) do { \ + printk("%x:", cmd_line); \ + printk(x); \ + cmd_line += off; \ + } while (0) +#define PL330_DBGMC_START(addr) (cmd_line = addr) +#else +#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) +#define PL330_DBGMC_START(addr) do {} while (0) +#endif + +struct _xfer_spec { + u32 ccr; + struct pl330_req *r; + struct pl330_xfer *x; +}; + +enum dmamov_dst { + SAR = 0, + CCR, + DAR, +}; + +enum pl330_dst { + SRC = 0, + DST, +}; + +enum pl330_cond { + SINGLE, + BURST, + ALWAYS, +}; + +struct _pl330_req { + u32 mc_bus; + void *mc_cpu; + /* Number of bytes taken to setup MC for the req */ + u32 mc_len; + struct pl330_req *r; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; +}; + +/* ToBeDone for tasklet */ +struct _pl330_tbd { + bool reset_dmac; + bool reset_mngr; + u8 reset_chan; +}; + +/* A DMAC Thread */ +struct pl330_thread { + u8 id; + int ev; + /* If the channel is not yet acquired by any client */ + bool free; + /* Parent DMAC */ + struct pl330_dmac *dmac; + /* Only two at a time */ + struct _pl330_req req[2]; + /* Index of the last submitted request */ + unsigned lstenq; +}; + +enum pl330_dmac_state { + UNINIT, + INIT, + DYING, +}; + +/* A DMAC */ +struct pl330_dmac { + spinlock_t lock; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + /* Pointer to platform specific stuff */ + struct pl330_info *pinfo; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + u32 mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; +}; + +static inline void _callback(struct pl330_req *r, enum pl330_op_err err) +{ + if (r && r->xfer_cb) + r->xfer_cb(r->token, err); +} + +static inline bool _queue_empty(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) + ? true : false; +} + +static inline bool _queue_full(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) + ? false : true; +} + +static inline bool is_manager(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + /* MANAGER is indexed at the end */ + if (thrd->id == pl330->pinfo->pcfg.num_chan) + return true; + else + return false; +} + +/* If manager of the thread is in Non-Secure mode */ +static inline bool _manager_ns(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; +} + +static inline u32 get_id(struct pl330_info *pi, u32 off) +{ + void __iomem *regs = pi->base; + u32 id = 0; + + id |= (readb(regs + off + 0x0) << 0); + id |= (readb(regs + off + 0x4) << 8); + id |= (readb(regs + off + 0x8) << 16); + id |= (readb(regs + off + 0xc) << 24); + + return id; +} + +static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], + enum pl330_dst da, u16 val) +{ + if (dry_run) + return SZ_DMAADDH; + + buf[0] = CMD_DMAADDH; + buf[0] |= (da << 1); + *((u16 *)&buf[1]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", + da == 1 ? "DA" : "SA", val); + + return SZ_DMAADDH; +} + +static inline u32 _emit_END(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAEND; + + buf[0] = CMD_DMAEND; + + PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); + + return SZ_DMAEND; +} + +static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) +{ + if (dry_run) + return SZ_DMAFLUSHP; + + buf[0] = CMD_DMAFLUSHP; + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); + + return SZ_DMAFLUSHP; +} + +static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMALD; + + buf[0] = CMD_DMALD; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMALD; +} + +static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMALDP; + + buf[0] = CMD_DMALDP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMALDP; +} + +static inline u32 _emit_LP(unsigned dry_run, u8 buf[], + unsigned loop, u8 cnt) +{ + if (dry_run) + return SZ_DMALP; + + buf[0] = CMD_DMALP; + + if (loop) + buf[0] |= (1 << 1); + + cnt--; /* DMAC increments by 1 internally */ + buf[1] = cnt; + + PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); + + return SZ_DMALP; +} + +struct _arg_LPEND { + enum pl330_cond cond; + bool forever; + unsigned loop; + u8 bjump; +}; + +static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], + const struct _arg_LPEND *arg) +{ + enum pl330_cond cond = arg->cond; + bool forever = arg->forever; + unsigned loop = arg->loop; + u8 bjump = arg->bjump; + + if (dry_run) + return SZ_DMALPEND; + + buf[0] = CMD_DMALPEND; + + if (loop) + buf[0] |= (1 << 2); + + if (!forever) + buf[0] |= (1 << 4); + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + buf[1] = bjump; + + PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", + forever ? "FE" : "END", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), + loop ? '1' : '0', + bjump); + + return SZ_DMALPEND; +} + +static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAKILL; + + buf[0] = CMD_DMAKILL; + + return SZ_DMAKILL; +} + +static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], + enum dmamov_dst dst, u32 val) +{ + if (dry_run) + return SZ_DMAMOV; + + buf[0] = CMD_DMAMOV; + buf[1] = dst; + *((u32 *)&buf[2]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", + dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); + + return SZ_DMAMOV; +} + +static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMANOP; + + buf[0] = CMD_DMANOP; + + PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); + + return SZ_DMANOP; +} + +static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMARMB; + + buf[0] = CMD_DMARMB; + + PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); + + return SZ_DMARMB; +} + +static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) +{ + if (dry_run) + return SZ_DMASEV; + + buf[0] = CMD_DMASEV; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); + + return SZ_DMASEV; +} + +static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMAST; + + buf[0] = CMD_DMAST; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMAST; +} + +static inline u32 _emit_STP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMASTP; + + buf[0] = CMD_DMASTP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMASTP; +} + +static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMASTZ; + + buf[0] = CMD_DMASTZ; + + PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); + + return SZ_DMASTZ; +} + +static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, + unsigned invalidate) +{ + if (dry_run) + return SZ_DMAWFE; + + buf[0] = CMD_DMAWFE; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + if (invalidate) + buf[1] |= (1 << 1); + + PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", + ev >> 3, invalidate ? ", I" : ""); + + return SZ_DMAWFE; +} + +static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMAWFP; + + buf[0] = CMD_DMAWFP; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (0 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (0 << 0); + else + buf[0] |= (0 << 1) | (1 << 0); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); + + return SZ_DMAWFP; +} + +static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAWMB; + + buf[0] = CMD_DMAWMB; + + PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); + + return SZ_DMAWMB; +} + +struct _arg_GO { + u8 chan; + u32 addr; + unsigned ns; +}; + +static inline u32 _emit_GO(unsigned dry_run, u8 buf[], + const struct _arg_GO *arg) +{ + u8 chan = arg->chan; + u32 addr = arg->addr; + unsigned ns = arg->ns; + + if (dry_run) + return SZ_DMAGO; + + buf[0] = CMD_DMAGO; + buf[0] |= (ns << 1); + + buf[1] = chan & 0x7; + + *((u32 *)&buf[2]) = addr; + + return SZ_DMAGO; +} + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +/* Returns Time-Out */ +static bool _until_dmac_idle(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + unsigned long loops = msecs_to_loops(5); + + do { + /* Until Manager is Idle */ + if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) + break; + + cpu_relax(); + } while (--loops); + + if (!loops) + return true; + + return false; +} + +static inline void _execute_DBGINSN(struct pl330_thread *thrd, + u8 insn[], bool as_manager) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + val = (insn[0] << 16) | (insn[1] << 24); + if (!as_manager) { + val |= (1 << 0); + val |= (thrd->id << 8); /* Channel Number */ + } + writel(val, regs + DBGINST0); + + val = *((u32 *)&insn[2]); + writel(val, regs + DBGINST1); + + /* If timed out due to halted state-machine */ + if (_until_dmac_idle(thrd)) { + dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); + return; + } + + /* Get going */ + writel(0, regs + DBGCMD); +} + +static inline u32 _state(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + if (is_manager(thrd)) + val = readl(regs + DS) & 0xf; + else + val = readl(regs + CS(thrd->id)) & 0xf; + + switch (val) { + case DS_ST_STOP: + return PL330_STATE_STOPPED; + case DS_ST_EXEC: + return PL330_STATE_EXECUTING; + case DS_ST_CMISS: + return PL330_STATE_CACHEMISS; + case DS_ST_UPDTPC: + return PL330_STATE_UPDTPC; + case DS_ST_WFE: + return PL330_STATE_WFE; + case DS_ST_FAULT: + return PL330_STATE_FAULTING; + case DS_ST_ATBRR: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_ATBARRIER; + case DS_ST_QBUSY: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_QUEUEBUSY; + case DS_ST_WFP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_WFP; + case DS_ST_KILL: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_KILLING; + case DS_ST_CMPLT: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_COMPLETING; + case DS_ST_FLTCMP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_FAULT_COMPLETING; + default: + return PL330_STATE_INVALID; + } +} + +/* If the request 'req' of thread 'thrd' is currently active */ +static inline bool _req_active(struct pl330_thread *thrd, + struct _pl330_req *req) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id)); + + if (IS_FREE(req)) + return false; + + return (pc >= buf && pc <= buf + req->mc_len) ? true : false; +} + +/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */ +static inline unsigned _thrd_active(struct pl330_thread *thrd) +{ + if (_req_active(thrd, &thrd->req[0])) + return 1; /* First req active */ + + if (_req_active(thrd, &thrd->req[1])) + return 2; /* Second req active */ + + return 0; +} + +static void _stop(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + + if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + /* Return if nothing needs to be done */ + if (_state(thrd) == PL330_STATE_COMPLETING + || _state(thrd) == PL330_STATE_KILLING + || _state(thrd) == PL330_STATE_STOPPED) + return; + + _emit_KILL(0, insn); + + /* Stop generating interrupts for SEV */ + writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); + + _execute_DBGINSN(thrd, insn, is_manager(thrd)); +} + +/* Start doing req 'idx' of thread 'thrd' */ +static bool _trigger(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + struct _pl330_req *req; + struct pl330_req *r; + struct _arg_GO go; + unsigned ns; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + + /* Return if already ACTIVE */ + if (_state(thrd) != PL330_STATE_STOPPED) + return true; + + if (!IS_FREE(&thrd->req[1 - thrd->lstenq])) + req = &thrd->req[1 - thrd->lstenq]; + else if (!IS_FREE(&thrd->req[thrd->lstenq])) + req = &thrd->req[thrd->lstenq]; + else + req = NULL; + + /* Return if no request */ + if (!req || !req->r) + return true; + + r = req->r; + + if (r->cfg) + ns = r->cfg->nonsecure ? 1 : 0; + else if (readl(regs + CS(thrd->id)) & CS_CNS) + ns = 1; + else + ns = 0; + + /* See 'Abort Sources' point-4 at Page 2-25 */ + if (_manager_ns(thrd) && !ns) + dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", + __func__, __LINE__); + + go.chan = thrd->id; + go.addr = req->mc_bus; + go.ns = ns; + _emit_GO(0, insn, &go); + + /* Set to generate interrupts for SEV */ + writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); + + /* Only manager can execute GO */ + _execute_DBGINSN(thrd, insn, true); + + return true; +} + +static bool _start(struct pl330_thread *thrd) +{ + switch (_state(thrd)) { + case PL330_STATE_FAULT_COMPLETING: + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + if (_state(thrd) == PL330_STATE_KILLING) + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_FAULTING: + _stop(thrd); + + case PL330_STATE_KILLING: + case PL330_STATE_COMPLETING: + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_STOPPED: + return _trigger(thrd); + + case PL330_STATE_WFP: + case PL330_STATE_QUEUEBUSY: + case PL330_STATE_ATBARRIER: + case PL330_STATE_UPDTPC: + case PL330_STATE_CACHEMISS: + case PL330_STATE_EXECUTING: + return true; + + case PL330_STATE_WFE: /* For RESUME, nothing yet */ + default: + return false; + } +} + +static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_RMB(dry_run, &buf[off]); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_WMB(dry_run, &buf[off]); + } + + return off; +} + +static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static int _bursts(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + switch (pxs->r->rqtype) { + case MEMTODEV: + off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); + break; + case DEVTOMEM: + off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); + break; + case MEMTOMEM: + off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); + break; + default: + off += 0x40000000; /* Scare off the Client */ + break; + } + + return off; +} + +/* Returns bytes consumed and updates bursts */ +static inline int _loop(unsigned dry_run, u8 buf[], + unsigned long *bursts, const struct _xfer_spec *pxs) +{ + int cyc, cycmax, szlp, szlpend, szbrst, off; + unsigned lcnt0, lcnt1, ljmp0, ljmp1; + struct _arg_LPEND lpend; + + /* Max iterations possibile in DMALP is 256 */ + if (*bursts >= 256*256) { + lcnt1 = 256; + lcnt0 = 256; + cyc = *bursts / lcnt1 / lcnt0; + } else if (*bursts > 256) { + lcnt1 = 256; + lcnt0 = *bursts / lcnt1; + cyc = 1; + } else { + lcnt1 = *bursts; + lcnt0 = 0; + cyc = 1; + } + + szlp = _emit_LP(1, buf, 0, 0); + szbrst = _bursts(1, buf, pxs, 1); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = 0; + szlpend = _emit_LPEND(1, buf, &lpend); + + if (lcnt0) { + szlp *= 2; + szlpend *= 2; + } + + /* + * Max bursts that we can unroll due to limit on the + * size of backward jump that can be encoded in DMALPEND + * which is 8-bits and hence 255 + */ + cycmax = (255 - (szlp + szlpend)) / szbrst; + + cyc = (cycmax < cyc) ? cycmax : cyc; + + off = 0; + + if (lcnt0) { + off += _emit_LP(dry_run, &buf[off], 0, lcnt0); + ljmp0 = off; + } + + off += _emit_LP(dry_run, &buf[off], 1, lcnt1); + ljmp1 = off; + + off += _bursts(dry_run, &buf[off], pxs, cyc); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 1; + lpend.bjump = off - ljmp1; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + + if (lcnt0) { + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = off - ljmp0; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + } + + *bursts = lcnt1 * cyc; + if (lcnt0) + *bursts *= lcnt0; + + return off; +} + +static inline int _setup_loops(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + u32 ccr = pxs->ccr; + unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); + int off = 0; + + while (bursts) { + c = bursts; + off += _loop(dry_run, &buf[off], &c, pxs); + bursts -= c; + } + + return off; +} + +static inline int _setup_xfer(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + int off = 0; + + /* DMAMOV SAR, x->src_addr */ + off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); + /* DMAMOV DAR, x->dst_addr */ + off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); + + /* Setup Loop(s) */ + off += _setup_loops(dry_run, &buf[off], pxs); + + return off; +} + +/* + * A req is a sequence of one or more xfer units. + * Returns the number of bytes taken to setup the MC for the req. + */ +static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, + unsigned index, struct _xfer_spec *pxs) +{ + struct _pl330_req *req = &thrd->req[index]; + struct pl330_xfer *x; + u8 *buf = req->mc_cpu; + int off = 0; + + PL330_DBGMC_START(req->mc_bus); + + /* DMAMOV CCR, ccr */ + off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); + + x = pxs->r->x; + do { + /* Error if xfer length is not aligned at burst size */ + if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) + return -EINVAL; + + pxs->x = x; + off += _setup_xfer(dry_run, &buf[off], pxs); + + x = x->next; + } while (x); + + /* DMASEV peripheral/event */ + off += _emit_SEV(dry_run, &buf[off], thrd->ev); + /* DMAEND */ + off += _emit_END(dry_run, &buf[off]); + + return off; +} + +static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) +{ + u32 ccr = 0; + + if (rqc->src_inc) + ccr |= CC_SRCINC; + + if (rqc->dst_inc) + ccr |= CC_DSTINC; + + /* We set same protection levels for Src and DST for now */ + if (rqc->privileged) + ccr |= CC_SRCPRI | CC_DSTPRI; + if (rqc->nonsecure) + ccr |= CC_SRCNS | CC_DSTNS; + if (rqc->insnaccess) + ccr |= CC_SRCIA | CC_DSTIA; + + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); + + ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); + ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); + + ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); + + ccr |= (rqc->swap << CC_SWAP_SHFT); + + return ccr; +} + +static inline bool _is_valid(u32 ccr) +{ + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + + dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; + scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; + + if (dcctl == DINVALID1 || dcctl == DINVALID2 + || scctl == SINVALID1 || scctl == SINVALID2) + return false; + else + return true; +} + +/* + * Submit a list of xfers after which the client wants notification. + * Client is not notified after each xfer unit, just once after all + * xfer units are done or some error occurs. + */ +int pl330_submit_req(void *ch_id, struct pl330_req *r) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + struct _xfer_spec xs; + unsigned long flags; + void __iomem *regs; + unsigned idx; + u32 ccr; + int ret = 0; + + /* No Req or Unacquired Channel or DMAC */ + if (!r || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + if (pl330->state == DYING + || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { + dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", + __func__, __LINE__); + return -EAGAIN; + } + + /* If request for non-existing peripheral */ + if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Invalid peripheral(%u)!\n", + __func__, __LINE__, r->peri); + return -EINVAL; + } + + spin_lock_irqsave(&pl330->lock, flags); + + if (_queue_full(thrd)) { + ret = -EAGAIN; + goto xfer_exit; + } + + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + + /* Use last settings, if not provided */ + if (r->cfg) + ccr = _prepare_ccr(r->cfg); + else + ccr = readl(regs + CC(thrd->id)); + + /* If this req doesn't have valid xfer settings */ + if (!_is_valid(ccr)) { + ret = -EINVAL; + dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", + __func__, __LINE__, ccr); + goto xfer_exit; + } + + idx = IS_FREE(&thrd->req[0]) ? 0 : 1; + + xs.ccr = ccr; + xs.r = r; + + /* First dry run to check if req is acceptable */ + ret = _setup_req(1, thrd, idx, &xs); + if (ret < 0) + goto xfer_exit; + + if (ret > pi->mcbufsz / 2) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Trying increasing mcbufsz\n", + __func__, __LINE__); + ret = -ENOMEM; + goto xfer_exit; + } + + /* Hook the request */ + thrd->lstenq = idx; + thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); + thrd->req[idx].r = r; + + ret = 0; + +xfer_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + return ret; +} +EXPORT_SYMBOL(pl330_submit_req); + +static void pl330_dotask(unsigned long data) +{ + struct pl330_dmac *pl330 = (struct pl330_dmac *) data; + struct pl330_info *pi = pl330->pinfo; + unsigned long flags; + int i; + + spin_lock_irqsave(&pl330->lock, flags); + + /* The DMAC itself gone nuts */ + if (pl330->dmac_tbd.reset_dmac) { + pl330->state = DYING; + /* Reset the manager too */ + pl330->dmac_tbd.reset_mngr = true; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_dmac = false; + } + + if (pl330->dmac_tbd.reset_mngr) { + _stop(pl330->manager); + /* Reset all channels */ + pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_mngr = false; + } + + for (i = 0; i < pi->pcfg.num_chan; i++) { + + if (pl330->dmac_tbd.reset_chan & (1 << i)) { + struct pl330_thread *thrd = &pl330->channels[i]; + void __iomem *regs = pi->base; + enum pl330_op_err err; + + _stop(thrd); + + if (readl(regs + FSC) & (1 << thrd->id)) + err = PL330_ERR_FAIL; + else + err = PL330_ERR_ABORT; + + spin_unlock_irqrestore(&pl330->lock, flags); + + _callback(thrd->req[1 - thrd->lstenq].r, err); + _callback(thrd->req[thrd->lstenq].r, err); + + spin_lock_irqsave(&pl330->lock, flags); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[0]); + MARK_FREE(&thrd->req[1]); + + /* Clear the reset flag */ + pl330->dmac_tbd.reset_chan &= ~(1 << i); + } + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return; +} + +/* Returns 1 if state was updated, 0 otherwise */ +int pl330_update(const struct pl330_info *pi) +{ + struct _pl330_req *rqdone; + struct pl330_dmac *pl330; + unsigned long flags; + void __iomem *regs; + u32 val; + int id, ev, ret = 0; + + if (!pi || !pi->pl330_data) + return 0; + + regs = pi->base; + pl330 = pi->pl330_data; + + spin_lock_irqsave(&pl330->lock, flags); + + val = readl(regs + FSM) & 0x1; + if (val) + pl330->dmac_tbd.reset_mngr = true; + else + pl330->dmac_tbd.reset_mngr = false; + + val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); + pl330->dmac_tbd.reset_chan |= val; + if (val) { + int i = 0; + while (i < pi->pcfg.num_chan) { + if (val & (1 << i)) { + dev_info(pi->dev, + "Reset Channel-%d\t CS-%x FTC-%x\n", + i, readl(regs + CS(i)), + readl(regs + FTC(i))); + _stop(&pl330->channels[i]); + } + i++; + } + } + + /* Check which event happened i.e, thread notified */ + val = readl(regs + ES); + if (pi->pcfg.num_events < 32 + && val & ~((1 << pi->pcfg.num_events) - 1)) { + pl330->dmac_tbd.reset_dmac = true; + dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); + ret = 1; + goto updt_exit; + } + + for (ev = 0; ev < pi->pcfg.num_events; ev++) { + if (val & (1 << ev)) { /* Event occured */ + struct pl330_thread *thrd; + u32 inten = readl(regs + INTEN); + int active; + + /* Clear the event */ + if (inten & (1 << ev)) + writel(1 << ev, regs + INTCLR); + + ret = 1; + + id = pl330->events[ev]; + + thrd = &pl330->channels[id]; + + active = _thrd_active(thrd); + if (!active) /* Aborted */ + continue; + + active -= 1; + + rqdone = &thrd->req[active]; + MARK_FREE(rqdone); + + /* Get going again ASAP */ + _start(thrd); + + /* For now, just make a list of callbacks to be done */ + list_add_tail(&rqdone->rqd, &pl330->req_done); + } + } + + /* Now that we are in no hurry, do the callbacks */ + while (!list_empty(&pl330->req_done)) { + rqdone = container_of(pl330->req_done.next, + struct _pl330_req, rqd); + + list_del_init(&rqdone->rqd); + + spin_unlock_irqrestore(&pl330->lock, flags); + _callback(rqdone->r, PL330_ERR_NONE); + spin_lock_irqsave(&pl330->lock, flags); + } + +updt_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + if (pl330->dmac_tbd.reset_dmac + || pl330->dmac_tbd.reset_mngr + || pl330->dmac_tbd.reset_chan) { + ret = 1; + tasklet_schedule(&pl330->tasks); + } + + return ret; +} +EXPORT_SYMBOL(pl330_update); + +int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + int ret = 0, active; + + if (!thrd || thrd->free || thrd->dmac->state == DYING) + return -EINVAL; + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + + switch (op) { + case PL330_OP_FLUSH: + /* Make sure the channel is stopped */ + _stop(thrd); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[0]); + MARK_FREE(&thrd->req[1]); + break; + + case PL330_OP_ABORT: + active = _thrd_active(thrd); + + /* Make sure the channel is stopped */ + _stop(thrd); + + /* ABORT is only for the active req */ + if (!active) + break; + + active--; + + thrd->req[active].r = NULL; + MARK_FREE(&thrd->req[active]); + + /* Start the next */ + case PL330_OP_START: + if (!_start(thrd)) + ret = -EIO; + break; + + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + return ret; +} +EXPORT_SYMBOL(pl330_chan_ctrl); + +int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + void __iomem *regs; + int active; + u32 val; + + if (!pstatus || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + /* The client should remove the DMAC and add again */ + if (pl330->state == DYING) + pstatus->dmac_halted = true; + else + pstatus->dmac_halted = false; + + val = readl(regs + FSC); + if (val & (1 << thrd->id)) + pstatus->faulting = true; + else + pstatus->faulting = false; + + active = _thrd_active(thrd); + + if (!active) { + /* Indicate that the thread is not running */ + pstatus->top_req = NULL; + pstatus->wait_req = NULL; + } else { + active--; + pstatus->top_req = thrd->req[active].r; + pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) + ? thrd->req[1 - active].r : NULL; + } + + pstatus->src_addr = readl(regs + SA(thrd->id)); + pstatus->dst_addr = readl(regs + DA(thrd->id)); + + return 0; +} +EXPORT_SYMBOL(pl330_chan_status); + +/* Reserve an event */ +static inline int _alloc_event(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + int ev; + + for (ev = 0; ev < pi->pcfg.num_events; ev++) + if (pl330->events[ev] == -1) { + pl330->events[ev] = thrd->id; + return ev; + } + + return -1; +} + +/* Upon success, returns IdentityToken for the + * allocated channel, NULL otherwise. + */ +void *pl330_request_channel(const struct pl330_info *pi) +{ + struct pl330_thread *thrd = NULL; + struct pl330_dmac *pl330; + unsigned long flags; + int chans, i; + + if (!pi || !pi->pl330_data) + return NULL; + + pl330 = pi->pl330_data; + + if (pl330->state == DYING) + return NULL; + + chans = pi->pcfg.num_chan; + + spin_lock_irqsave(&pl330->lock, flags); + + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + if (thrd->free) { + thrd->ev = _alloc_event(thrd); + if (thrd->ev >= 0) { + thrd->free = false; + thrd->lstenq = 1; + thrd->req[0].r = NULL; + MARK_FREE(&thrd->req[0]); + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[1]); + break; + } + } + thrd = NULL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return thrd; +} +EXPORT_SYMBOL(pl330_request_channel); + +/* Release an event */ +static inline void _free_event(struct pl330_thread *thrd, int ev) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + /* If the event is valid and was held by the thread */ + if (ev >= 0 && ev < pi->pcfg.num_events + && pl330->events[ev] == thrd->id) + pl330->events[ev] = -1; +} + +void pl330_release_channel(void *ch_id) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + + if (!thrd || thrd->free) + return; + + _stop(thrd); + + _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); + _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + _free_event(thrd, thrd->ev); + thrd->free = true; + spin_unlock_irqrestore(&pl330->lock, flags); +} +EXPORT_SYMBOL(pl330_release_channel); + +/* Initialize the structure for PL330 configuration, that can be used + * by the client driver the make best use of the DMAC + */ +static void read_dmac_config(struct pl330_info *pi) +{ + void __iomem *regs = pi->base; + u32 val; + + val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; + val &= CRD_DATA_WIDTH_MASK; + pi->pcfg.data_bus_width = 8 * (1 << val); + + val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; + val &= CRD_DATA_BUFF_MASK; + pi->pcfg.data_buf_dep = val + 1; + + val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; + val &= CR0_NUM_CHANS_MASK; + val += 1; + pi->pcfg.num_chan = val; + + val = readl(regs + CR0); + if (val & CR0_PERIPH_REQ_SET) { + val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; + val += 1; + pi->pcfg.num_peri = val; + pi->pcfg.peri_ns = readl(regs + CR4); + } else { + pi->pcfg.num_peri = 0; + } + + val = readl(regs + CR0); + if (val & CR0_BOOT_MAN_NS) + pi->pcfg.mode |= DMAC_MODE_NS; + else + pi->pcfg.mode &= ~DMAC_MODE_NS; + + val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; + val &= CR0_NUM_EVENTS_MASK; + val += 1; + pi->pcfg.num_events = val; + + pi->pcfg.irq_ns = readl(regs + CR3); + + pi->pcfg.periph_id = get_id(pi, PERIPH_ID); + pi->pcfg.pcell_id = get_id(pi, PCELL_ID); +} + +static inline void _reset_thread(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + thrd->req[0].mc_cpu = pl330->mcode_cpu + + (thrd->id * pi->mcbufsz); + thrd->req[0].mc_bus = pl330->mcode_bus + + (thrd->id * pi->mcbufsz); + thrd->req[0].r = NULL; + MARK_FREE(&thrd->req[0]); + + thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + + pi->mcbufsz / 2; + thrd->req[1].mc_bus = thrd->req[0].mc_bus + + pi->mcbufsz / 2; + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[1]); +} + +static int dmac_alloc_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Allocate 1 Manager and 'chans' Channel threads */ + pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), + GFP_KERNEL); + if (!pl330->channels) + return -ENOMEM; + + /* Init Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + thrd->id = i; + thrd->dmac = pl330; + _reset_thread(thrd); + thrd->free = true; + } + + /* MANAGER is indexed at the end */ + thrd = &pl330->channels[chans]; + thrd->id = chans; + thrd->dmac = pl330; + thrd->free = false; + pl330->manager = thrd; + + return 0; +} + +static int dmac_alloc_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + int ret; + + /* + * Alloc MicroCode buffer for 'chans' Channel threads. + * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) + */ + pl330->mcode_cpu = dma_alloc_coherent(pi->dev, + chans * pi->mcbufsz, + &pl330->mcode_bus, GFP_KERNEL); + if (!pl330->mcode_cpu) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + ret = dmac_alloc_threads(pl330); + if (ret) { + dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", + __func__, __LINE__); + dma_free_coherent(pi->dev, + chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); + return ret; + } + + return 0; +} + +int pl330_add(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + void __iomem *regs; + int i, ret; + + if (!pi || !pi->dev) + return -EINVAL; + + /* If already added */ + if (pi->pl330_data) + return -EINVAL; + + /* + * If the SoC can perform reset on the DMAC, then do it + * before reading its configuration. + */ + if (pi->dmac_reset) + pi->dmac_reset(pi); + + regs = pi->base; + + /* Check if we can handle this DMAC */ + if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL + || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { + dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", + readl(regs + PERIPH_ID), readl(regs + PCELL_ID)); + return -EINVAL; + } + + /* Read the configuration of the DMAC */ + read_dmac_config(pi); + + if (pi->pcfg.num_events == 0) { + dev_err(pi->dev, "%s:%d Can't work without events!\n", + __func__, __LINE__); + return -EINVAL; + } + + pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); + if (!pl330) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + /* Assign the info structure and private data */ + pl330->pinfo = pi; + pi->pl330_data = pl330; + + spin_lock_init(&pl330->lock); + + INIT_LIST_HEAD(&pl330->req_done); + + /* Use default MC buffer size if not provided */ + if (!pi->mcbufsz) + pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; + + /* Mark all events as free */ + for (i = 0; i < pi->pcfg.num_events; i++) + pl330->events[i] = -1; + + /* Allocate resources needed by the DMAC */ + ret = dmac_alloc_resources(pl330); + if (ret) { + dev_err(pi->dev, "Unable to create channels for DMAC\n"); + kfree(pl330); + return ret; + } + + tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); + + pl330->state = INIT; + + return 0; +} +EXPORT_SYMBOL(pl330_add); + +static int dmac_free_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Release Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + pl330_release_channel((void *)thrd); + } + + /* Free memory */ + kfree(pl330->channels); + + return 0; +} + +static void dmac_free_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + + dmac_free_threads(pl330); + + dma_free_coherent(pi->dev, chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); +} + +void pl330_del(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + + if (!pi || !pi->pl330_data) + return; + + pl330 = pi->pl330_data; + + pl330->state = UNINIT; + + tasklet_kill(&pl330->tasks); + + /* Free DMAC resources */ + dmac_free_resources(pl330); + + kfree(pl330); + pi->pl330_data = NULL; +} +EXPORT_SYMBOL(pl330_del); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 1cf999ade4b..ba65f6eedca 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -266,13 +266,53 @@ static int vic_set_wake(unsigned int irq, unsigned int on) #endif /* CONFIG_PM */ static struct irq_chip vic_chip = { - .name = "VIC", - .ack = vic_ack_irq, - .mask = vic_mask_irq, - .unmask = vic_unmask_irq, - .set_wake = vic_set_wake, + .name = "VIC", + .ack = vic_ack_irq, + .mask = vic_mask_irq, + .unmask = vic_unmask_irq, + .set_wake = vic_set_wake, }; +static void __init vic_disable(void __iomem *base) +{ + writel(0, base + VIC_INT_SELECT); + writel(0, base + VIC_INT_ENABLE); + writel(~0, base + VIC_INT_ENABLE_CLEAR); + writel(0, base + VIC_IRQ_STATUS); + writel(0, base + VIC_ITCR); + writel(~0, base + VIC_INT_SOFT_CLEAR); +} + +static void __init vic_clear_interrupts(void __iomem *base) +{ + unsigned int i; + + writel(0, base + VIC_PL190_VECT_ADDR); + for (i = 0; i < 19; i++) { + unsigned int value; + + value = readl(base + VIC_PL190_VECT_ADDR); + writel(value, base + VIC_PL190_VECT_ADDR); + } +} + +static void __init vic_set_irq_sources(void __iomem *base, + unsigned int irq_start, u32 vic_sources) +{ + unsigned int i; + + for (i = 0; i < 32; i++) { + if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} + /* * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. * The original cell has 32 interrupts, while the modified one has 64, @@ -287,13 +327,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; /* Disable all interrupts initially. */ - - writel(0, base + VIC_INT_SELECT); - writel(0, base + VIC_INT_ENABLE); - writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_IRQ_STATUS); - writel(0, base + VIC_ITCR); - writel(~0, base + VIC_INT_SOFT_CLEAR); + vic_disable(base); /* * Make sure we clear all existing interrupts. The vector registers @@ -302,13 +336,8 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, * the second base address, which is 0x20 in the page */ if (vic_2nd_block) { - writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; + vic_clear_interrupts(base); - value = readl(base + VIC_PL190_VECT_ADDR); - writel(value, base + VIC_PL190_VECT_ADDR); - } /* ST has 16 vectors as well, but we don't enable them by now */ for (i = 0; i < 16; i++) { void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); @@ -318,16 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); } - for (i = 0; i < 32; i++) { - if (vic_sources & (1 << i)) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - } + vic_set_irq_sources(base, irq_start, vic_sources); } /** @@ -365,37 +385,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, } /* Disable all interrupts initially. */ + vic_disable(base); - writel(0, base + VIC_INT_SELECT); - writel(0, base + VIC_INT_ENABLE); - writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_IRQ_STATUS); - writel(0, base + VIC_ITCR); - writel(~0, base + VIC_INT_SOFT_CLEAR); - - /* - * Make sure we clear all existing interrupts - */ - writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; - - value = readl(base + VIC_PL190_VECT_ADDR); - writel(value, base + VIC_PL190_VECT_ADDR); - } + /* Make sure we clear all existing interrupts */ + vic_clear_interrupts(base); vic_init2(base); - for (i = 0; i < 32; i++) { - if (vic_sources & (1 << i)) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - } + vic_set_irq_sources(base, irq_start, vic_sources); vic_pm_register(base, irq_start, resume_sources); } diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig new file mode 100644 index 00000000000..35e64d1cb75 --- /dev/null +++ b/arch/arm/configs/spear300_defconfig @@ -0,0 +1,773 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:36:23 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y +# CONFIG_ARCH_SPEAR6XX is not set +CONFIG_MACH_SPEAR300=y +# CONFIG_MACH_SPEAR310 is not set +# CONFIG_MACH_SPEAR320 is not set +CONFIG_BOARD_SPEAR300_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig new file mode 100644 index 00000000000..cbbfd290bba --- /dev/null +++ b/arch/arm/configs/spear310_defconfig @@ -0,0 +1,775 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:37:01 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y +# CONFIG_ARCH_SPEAR6XX is not set +# CONFIG_MACH_SPEAR300 is not set +CONFIG_MACH_SPEAR310=y +# CONFIG_MACH_SPEAR320 is not set +# CONFIG_BOARD_SPEAR300_EVB is not set +CONFIG_BOARD_SPEAR310_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig new file mode 100644 index 00000000000..2ae3c110a21 --- /dev/null +++ b/arch/arm/configs/spear320_defconfig @@ -0,0 +1,775 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:37:12 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y +# CONFIG_ARCH_SPEAR6XX is not set +# CONFIG_MACH_SPEAR300 is not set +# CONFIG_MACH_SPEAR310 is not set +CONFIG_MACH_SPEAR320=y +# CONFIG_BOARD_SPEAR300_EVB is not set +CONFIG_BOARD_SPEAR320_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig new file mode 100644 index 00000000000..c85a02924ec --- /dev/null +++ b/arch/arm/configs/spear600_defconfig @@ -0,0 +1,760 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:37:26 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +# CONFIG_ARCH_SPEAR3XX is not set +CONFIG_ARCH_SPEAR6XX=y +# CONFIG_MACH_SPEAR300 is not set +# CONFIG_MACH_SPEAR310 is not set +# CONFIG_MACH_SPEAR320 is not set +# CONFIG_BOARD_SPEAR300_EVB is not set +CONFIG_MACH_SPEAR600=y +CONFIG_BOARD_SPEAR600_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index 04be3bdf46b..c0f4e7bf22d 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -1,21 +1,30 @@ #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H #define __ASM_ARM_HARDWARE_ARM_TIMER_H -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) +/* + * ARM timer implementation, found in Integrator, Versatile and Realview + * platforms. Not all platforms support all registers and bits in these + * registers, so we mark them with A for Integrator AP, C for Integrator + * CP, V for Versatile and R for Realview. + * + * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview + * can have 16-bit or 32-bit selectable via a bit in the control register. + */ +#define TIMER_LOAD 0x00 /* ACVR rw */ +#define TIMER_VALUE 0x04 /* ACVR ro */ +#define TIMER_CTRL 0x08 /* ACVR rw */ +#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */ +#define TIMER_CTRL_32BIT (1 << 1) /* CVR */ +#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */ +#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */ +#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */ +#define TIMER_CTRL_IE (1 << 5) /* VR */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */ +#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */ -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 +#define TIMER_INTCLR 0x0c /* ACVR wo */ +#define TIMER_RIS 0x10 /* CVR ro */ +#define TIMER_MIS 0x14 /* CVR ro */ +#define TIMER_BGLOAD 0x18 /* CVR rw */ #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index cdb9022716f..6bcba48800f 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -21,6 +21,9 @@ #define __ASM_ARM_HARDWARE_L2X0_H #define L2X0_CACHE_ID 0x000 +#define L2X0_CACHE_ID_PART_MASK (0xf << 6) +#define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h new file mode 100644 index 00000000000..10382a3dcec --- /dev/null +++ b/arch/arm/include/asm/hardware/icst.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/icst.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST + * clock generators. See http://www.icst.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST_H +#define ASMARM_HARDWARE_ICST_H + +struct icst_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned long vco_min; /* exclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ + const unsigned char *s2div; /* chip specific s2div array */ + const unsigned char *idx2s; /* chip specific idx2s array */ +}; + +struct icst_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco); +struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq); + +/* + * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V). + * This frequency is pre-output divider. + */ +#define ICST307_VCO_MIN 6000000 +#define ICST307_VCO_MAX 200000000 + +extern const unsigned char icst307_s2div[]; +extern const unsigned char icst307_idx2s[]; + +/* + * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V). + * This frequency is pre-output divider. + */ +#define ICST525_VCO_MIN 10000000 +#define ICST525_VCO_MAX_3V 200000000 +#define ICST525_VCO_MAX_5V 320000000 + +extern const unsigned char icst525_s2div[]; +extern const unsigned char icst525_idx2s[]; + +#endif diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h deleted file mode 100644 index 554f128a104..00000000000 --- a/arch/arm/include/asm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h deleted file mode 100644 index 58f0dc43e2e..00000000000 --- a/arch/arm/include/asm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h new file mode 100644 index 00000000000..575fa8186ca --- /dev/null +++ b/arch/arm/include/asm/hardware/pl330.h @@ -0,0 +1,217 @@ +/* linux/include/asm/hardware/pl330.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PL330_CORE_H +#define __PL330_CORE_H + +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0 = 0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0 = 0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1 = 8, + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +enum pl330_byteswap { + SWAP_NO = 0, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +extern int pl330_add(struct pl330_info *); +extern void pl330_del(struct pl330_info *pi); +extern int pl330_update(const struct pl330_info *pi); +extern void pl330_release_channel(void *ch_id); +extern void *pl330_request_channel(const struct pl330_info *pi); +extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); +extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); +extern int pl330_submit_req(void *ch_id, struct pl330_req *r); + +#endif /* __PL330_CORE_H */ diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h new file mode 100644 index 00000000000..a101f10bb5b --- /dev/null +++ b/arch/arm/include/asm/hardware/sp810.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/sp810.h + * + * ARM PrimeXsys System Controller SP810 header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_SP810_H +#define __ASM_ARM_SP810_H + +#include <linux/io.h> + +/* sysctl registers offset */ +#define SCCTRL 0x000 +#define SCSYSSTAT 0x004 +#define SCIMCTRL 0x008 +#define SCIMSTAT 0x00C +#define SCXTALCTRL 0x010 +#define SCPLLCTRL 0x014 +#define SCPLLFCTRL 0x018 +#define SCPERCTRL0 0x01C +#define SCPERCTRL1 0x020 +#define SCPEREN 0x024 +#define SCPERDIS 0x028 +#define SCPERCLKEN 0x02C +#define SCPERSTAT 0x030 +#define SCSYSID0 0xEE0 +#define SCSYSID1 0xEE4 +#define SCSYSID2 0xEE8 +#define SCSYSID3 0xEEC +#define SCITCR 0xF00 +#define SCITIR0 0xF04 +#define SCITIR1 0xF08 +#define SCITOR 0xF0C +#define SCCNTCTRL 0xF10 +#define SCCNTDATA 0xF14 +#define SCCNTSTEP 0xF18 +#define SCPERIPHID0 0xFE0 +#define SCPERIPHID1 0xFE4 +#define SCPERIPHID2 0xFE8 +#define SCPERIPHID3 0xFEC +#define SCPCELLID0 0xFF0 +#define SCPCELLID1 0xFF4 +#define SCPCELLID2 0xFF8 +#define SCPCELLID3 0xFFC + +static inline void sysctl_soft_reset(void __iomem *base) +{ + /* writing any value to SCSYSSTAT reg will reset system */ + writel(0, base + SCSYSSTAT); +} + +#endif /* __ASM_ARM_SP810_H */ diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index a38bdc7afa3..52f0da1e97d 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -8,10 +8,16 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_MACH_PCI_H +#define __ASM_MACH_PCI_H + struct pci_sys_data; struct pci_bus; struct hw_pci { +#ifdef CONFIG_PCI_DOMAINS + int domain; +#endif struct list_head buses; int nr_controllers; int (*setup)(int nr, struct pci_sys_data *); @@ -26,6 +32,9 @@ struct hw_pci { * Per-controller structure */ struct pci_sys_data { +#ifdef CONFIG_PCI_DOMAINS + int domain; +#endif struct list_head node; int busnr; /* primary bus number */ u64 mem_offset; /* bus->cpu memory mapping offset */ @@ -70,3 +79,5 @@ extern int pci_v3_setup(int nr, struct pci_sys_data *); extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); extern void pci_v3_preinit(void); extern void pci_v3_postinit(void); + +#endif /* __ASM_MACH_PCI_H */ diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 8bffc3ff3ac..35d408f6dcc 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -38,7 +38,7 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long (*offset)(void); #endif }; diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 47980118d0a..92e2a833693 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -4,8 +4,23 @@ #ifdef __KERNEL__ #include <asm-generic/pci-dma-compat.h> +#include <asm/mach/pci.h> /* for pci_sys_data */ #include <mach/hardware.h> /* for PCIBIOS_MIN_* */ +#ifdef CONFIG_PCI_DOMAINS +static inline int pci_domain_nr(struct pci_bus *bus) +{ + struct pci_sys_data *root = bus->sysdata; + + return root->domain; +} + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return pci_domain_nr(bus); +} +#endif /* CONFIG_PCI_DOMAINS */ + #ifdef CONFIG_PCI_HOST_ITE8152 /* ITE bridge requires setting latency timer to avoid early bus access termination by PIC bus mater devices diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 11397687f42..ab68cf1ef80 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -314,7 +314,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) #define pgprot_writecombine(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) -#if __LINUX_ARM_ARCH__ >= 7 +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE) #else diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 2829b9f981a..44bec1f02cb 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -12,6 +12,11 @@ #ifndef __ARM_PMU_H__ #define __ARM_PMU_H__ +enum arm_pmu_type { + ARM_PMU_DEVICE_CPU = 0, + ARM_NUM_PMU_DEVICES, +}; + #ifdef CONFIG_CPU_HAS_PMU struct pmu_irqs { diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index ca0a37d0340..bcda59f3994 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -4,24 +4,8 @@ #include <asm/memory.h> #include <asm/types.h> -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* buffer offset */ - dma_addr_t dma_address; /* dma address */ - unsigned int length; /* length */ -}; +#include <asm-generic/scatterlist.h> -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#undef ARCH_HAS_SG_CHAIN #endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e0d763be184..3d05190797c 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -82,7 +82,7 @@ struct secondary_data { extern struct secondary_data secondary_data; extern int __cpu_disable(void); -extern int mach_cpu_disable(unsigned int cpu); +extern int platform_cpu_disable(unsigned int cpu); extern void __cpu_die(unsigned int cpu); extern void cpu_die(void); diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index ca88e6a8470..02f5d99adbc 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -137,7 +137,7 @@ extern unsigned int user_debug; #define dmb() __asm__ __volatile__ ("" : : : "memory") #endif -#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#if defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() dmb() #define rmb() dmb() #define wmb() dmb() diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index bd397e0b663..c6273a3bfc2 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -527,6 +527,9 @@ static void __init pcibios_init_hw(struct hw_pci *hw) if (!sys) panic("PCI: unable to allocate sys data!"); +#ifdef CONFIG_PCI_DOMAINS + sys->domain = hw->domain; +#endif sys->hw = hw; sys->busnr = busnr; sys->swizzle = hw->swizzle; diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 7d5b9fb01e7..2c4a185f92c 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -16,6 +16,8 @@ #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/scatterlist.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> #include <asm/dma.h> @@ -264,3 +266,37 @@ int get_dma_residue(unsigned int chan) return ret; } EXPORT_SYMBOL(get_dma_residue); + +#ifdef CONFIG_PROC_FS +static int proc_dma_show(struct seq_file *m, void *v) +{ + int i; + + for (i = 0 ; i < MAX_DMA_CHANNELS ; i++) { + dma_t *dma = dma_channel(i); + if (dma && dma->lock) + seq_printf(m, "%2d: %s\n", i, dma->device_id); + } + return 0; +} + +static int proc_dma_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_dma_show, NULL); +} + +static const struct file_operations proc_dma_operations = { + .open = proc_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_dma_init(void) +{ + proc_create("dma", 0, NULL, &proc_dma_operations); + return 0; +} + +__initcall(proc_dma_init); +#endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 577543f3857..7a3cc026693 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -162,7 +162,7 @@ int __cpu_disable(void) struct task_struct *p; int ret; - ret = mach_cpu_disable(cpu); + ret = platform_cpu_disable(cpu); if (ret) return ret; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 28753805d2d..38c261f9951 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifndef CONFIG_GENERIC_TIME -static unsigned long dummy_gettimeoffset(void) +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET +u32 arch_gettimeoffset(void) { + if (system_timer->offset != NULL) + return system_timer->offset() * 1000; + return 0; } -#endif +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ #ifdef CONFIG_LEDS_TIMER static inline void do_leds(void) @@ -93,63 +96,6 @@ static inline void do_leds(void) #define do_leds() #endif -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = system_timer->offset(); - sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - /* usec may have gone up a lot: be safe */ - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * done, and then undo it! - */ - nsec -= system_timer->offset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ #ifndef CONFIG_GENERIC_CLOCKEVENTS /* @@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs); void __init time_init(void) { -#ifndef CONFIG_GENERIC_TIME - if (system_timer->offset == NULL) - system_timer->offset = dummy_gettimeoffset; -#endif system_timer->init(); } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2c27300f9da..103976411a6 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -97,6 +97,7 @@ config ARCH_AT572D940HF config ARCH_AT91X40 bool "AT91x40" + select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 53dd2a9eecf..2f139196d63 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -29,6 +29,7 @@ #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/time.h> +#include <asm/pmu.h> #include <asm/mach/arch.h> #include <mach/dma.h> @@ -85,8 +86,23 @@ static struct platform_device nand_device = { .num_resources = ARRAY_SIZE(nand_resource), }; +static struct resource pmu_resource = { + .start = IRQ_PMUIRQ, + .end = IRQ_PMUIRQ, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pmu_resource, + .num_resources = 1, +}; + + static struct platform_device *devices[] __initdata = { &nand_device, + &pmu_device, }; /**************************************************************************** diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c index a7b4591205a..98659217676 100644 --- a/arch/arm/mach-clps711x/mm.c +++ b/arch/arm/mach-clps711x/mm.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <asm/sizes.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index caf6d5154ae..3a1a855bfdc 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -41,7 +41,7 @@ static struct platform_device adssphere_flash = { .resource = &adssphere_flash_resource, }; -static struct ep93xx_eth_data adssphere_eth_data = { +static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 5f80092b6ac..e29bdef9b2e 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -96,6 +96,10 @@ static struct clk clk_keypad = { .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, .set_rate = set_keytchclk_rate, }; +static struct clk clk_spi = { + .parent = &clk_xtali, + .rate = EP93XX_EXT_CLK_RATE, +}; static struct clk clk_pwm = { .parent = &clk_xtali, .rate = EP93XX_EXT_CLK_RATE, @@ -186,6 +190,7 @@ static struct clk_lookup clocks[] = { INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), INIT_CK("ep93xx-fb", NULL, &clk_video), + INIT_CK("ep93xx-spi.0", NULL, &clk_spi), INIT_CK(NULL, "pwm_clk", &clk_pwm), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), @@ -473,6 +478,14 @@ static int __init ep93xx_clock_init(void) /* Initialize the pll2 derived clocks */ clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1); + /* + * EP93xx SSP clock rate was doubled in version E2. For more information + * see: + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf + */ + if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) + clk_spi.rate /= 2; + pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", clk_pll1.rate / 1000000, clk_pll2.rate / 1000000); pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 90fb591cbff..9092677f63e 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,10 +31,12 @@ #include <linux/amba/serial.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/spi/spi.h> #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_keypad.h> +#include <mach/ep93xx_spi.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -222,6 +224,20 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) } EXPORT_SYMBOL(ep93xx_devcfg_set_clear); +/** + * ep93xx_chip_revision() - returns the EP93xx chip revision + * + * See <mach/platform.h> for more information. + */ +unsigned int ep93xx_chip_revision(void) +{ + unsigned int v; + + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + v &= EP93XX_SYSCON_SYSCFG_REV_MASK; + v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; + return v; +} /************************************************************************* * EP93xx peripheral handling @@ -330,6 +346,10 @@ static struct platform_device ep93xx_ohci_device = { .resource = ep93xx_ohci_resources, }; + +/************************************************************************* + * EP93xx ethernet peripheral handling + *************************************************************************/ static struct ep93xx_eth_data ep93xx_eth_data; static struct resource ep93xx_eth_resource[] = { @@ -354,6 +374,12 @@ static struct platform_device ep93xx_eth_device = { .resource = ep93xx_eth_resource, }; +/** + * ep93xx_register_eth - Register the built-in ethernet platform device. + * @data: platform specific ethernet configuration (__initdata) + * @copy_addr: flag indicating that the MAC address should be copied + * from the IndAd registers (as programmed by the bootloader) + */ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) { if (copy_addr) @@ -370,11 +396,19 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) static struct i2c_gpio_platform_data ep93xx_i2c_data; static struct platform_device ep93xx_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &ep93xx_i2c_data, + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ep93xx_i2c_data, + }, }; +/** + * ep93xx_register_i2c - Register the i2c platform device. + * @data: platform specific i2c-gpio configuration (__initdata) + * @devices: platform specific i2c bus device information (__initdata) + * @num: the number of devices on the i2c bus + */ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num) { @@ -398,17 +432,67 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, platform_device_register(&ep93xx_i2c_device); } +/************************************************************************* + * EP93xx SPI peripheral handling + *************************************************************************/ +static struct ep93xx_spi_info ep93xx_spi_master_data; + +static struct resource ep93xx_spi_resources[] = { + { + .start = EP93XX_SPI_PHYS_BASE, + .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EP93XX_SSP, + .end = IRQ_EP93XX_SSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_spi_device = { + .name = "ep93xx-spi", + .id = 0, + .dev = { + .platform_data = &ep93xx_spi_master_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_spi_resources), + .resource = ep93xx_spi_resources, +}; + +/** + * ep93xx_register_spi() - registers spi platform device + * @info: ep93xx board specific spi master info (__initdata) + * @devices: SPI devices to register (__initdata) + * @num: number of SPI devices to register + * + * This function registers platform device for the EP93xx SPI controller and + * also makes sure that SPI pins are muxed so that I2S is not using those pins. + */ +void __init ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num) +{ + /* + * When SPI is used, we need to make sure that I2S is muxed off from + * SPI pins. + */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); + + ep93xx_spi_master_data = *info; + spi_register_board_info(devices, num); + platform_device_register(&ep93xx_spi_device); +} /************************************************************************* * EP93xx LEDs *************************************************************************/ static struct gpio_led ep93xx_led_pins[] = { { - .name = "platform:grled", - .gpio = EP93XX_GPIO_LINE_GRLED, + .name = "platform:grled", + .gpio = EP93XX_GPIO_LINE_GRLED, }, { - .name = "platform:rdled", - .gpio = EP93XX_GPIO_LINE_RDLED, + .name = "platform:rdled", + .gpio = EP93XX_GPIO_LINE_RDLED, }, }; @@ -528,7 +612,7 @@ static struct platform_device ep93xx_fb_device = { .name = "ep93xx-fb", .id = -1, .dev = { - .platform_data = &ep93xxfb_data, + .platform_data = &ep93xxfb_data, .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, }, @@ -536,6 +620,10 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +/** + * ep93xx_register_fb - Register the framebuffer platform device. + * @data: platform specific framebuffer configuration (__initdata) + */ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) { ep93xxfb_data = *data; @@ -546,6 +634,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) /************************************************************************* * EP93xx matrix keypad peripheral handling *************************************************************************/ +static struct ep93xx_keypad_platform_data ep93xx_keypad_data; + static struct resource ep93xx_keypad_resource[] = { { .start = EP93XX_KEY_MATRIX_PHYS_BASE, @@ -559,15 +649,22 @@ static struct resource ep93xx_keypad_resource[] = { }; static struct platform_device ep93xx_keypad_device = { - .name = "ep93xx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), - .resource = ep93xx_keypad_resource, + .name = "ep93xx-keypad", + .id = -1, + .dev = { + .platform_data = &ep93xx_keypad_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), + .resource = ep93xx_keypad_resource, }; +/** + * ep93xx_register_keypad - Register the keypad platform device. + * @data: platform specific keypad configuration (__initdata) + */ void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) { - ep93xx_keypad_device.dev.platform_data = data; + ep93xx_keypad_data = *data; platform_device_register(&ep93xx_keypad_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d22d67ac8b9..3884182cd36 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -74,7 +74,7 @@ static void __init edb93xx_register_flash(void) } } -static struct ep93xx_eth_data edb93xx_eth_data = { +static struct ep93xx_eth_data __initdata edb93xx_eth_data = { .phy_id = 1, }; @@ -82,7 +82,7 @@ static struct ep93xx_eth_data edb93xx_eth_data = { /************************************************************************* * EDB93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = { +static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 3da7ca816d1..a809618e9f0 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -41,7 +41,7 @@ static struct platform_device gesbc9312_flash = { .resource = &gesbc9312_flash_resource, }; -static struct ep93xx_eth_data gesbc9312_eth_data = { +static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 93e2ecc79ce..b1e096f0c2d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -106,6 +106,7 @@ #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) +#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) #define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) #define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index c6dc14dbca1..9a4413dd44b 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -6,9 +6,11 @@ struct i2c_gpio_platform_data; struct i2c_board_info; +struct spi_board_info; struct platform_device; struct ep93xxfb_mach_info; struct ep93xx_keypad_platform_data; +struct ep93xx_spi_info; struct ep93xx_eth_data { @@ -33,9 +35,19 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits) ep93xx_devcfg_set_clear(0x00, bits); } +#define EP93XX_CHIP_REV_D0 3 +#define EP93XX_CHIP_REV_D1 4 +#define EP93XX_CHIP_REV_E0 5 +#define EP93XX_CHIP_REV_E1 6 +#define EP93XX_CHIP_REV_E2 7 + +unsigned int ep93xx_chip_revision(void); + void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num); +void ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index c33360e8286..1cc911b4efa 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -80,7 +80,7 @@ static void __init micro9_register_flash(void) /************************************************************************* * Micro9 Ethernet *************************************************************************/ -static struct ep93xx_eth_data micro9_eth_data = { +static struct ep93xx_eth_data __initdata micro9_eth_data = { .phy_id = 0x1f, }; diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index cd93990f1b9..388aec95f60 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -49,17 +49,17 @@ static struct platform_device simone_flash = { }, }; -static struct ep93xx_eth_data simone_eth_data = { +static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; -static struct ep93xxfb_mach_info simone_fb_info = { +static struct ep93xxfb_mach_info __initdata simone_fb_info = { .num_modes = EP93XXFB_USE_MODEDB, .bpp = 16, .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; -static struct i2c_gpio_platform_data simone_i2c_gpio_data = { +static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 51134b0382c..38deaee4039 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -125,11 +125,11 @@ static struct platform_device snappercl15_nand_device = { .num_resources = ARRAY_SIZE(snappercl15_nand_resource), }; -static struct ep93xx_eth_data snappercl15_eth_data = { +static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; -static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = { +static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, @@ -145,7 +145,7 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = { }, }; -static struct ep93xxfb_mach_info snappercl15_fb_info = { +static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { .num_modes = EP93XXFB_USE_MODEDB, .bpp = 16, }; diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index fac1ec7a60f..9553031900b 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -186,7 +186,7 @@ static struct platform_device ts72xx_wdt_device = { .resource = ts72xx_wdt_resources, }; -static struct ep93xx_eth_data ts72xx_eth_data = { +static struct ep93xx_eth_data __initdata ts72xx_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index df97d16390e..27db275b367 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -11,6 +11,7 @@ config ARCH_INTEGRATOR_AP config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR + select ARM_TIMER_SP804 help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 6a5ef8d30b1..ebeef966e1f 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := clock.o core.o lm.o +obj-y := core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h deleted file mode 100644 index 609c49de3d4..00000000000 --- a/arch/arm/mach-integrator/common.h +++ /dev/null @@ -1,2 +0,0 @@ -extern void integrator_time_init(unsigned long, unsigned int); -extern unsigned long integrator_gettimeoffset(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 8b390e36ba6..b02cfc06e0a 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -24,15 +24,13 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> -#include <asm/hardware/arm_timer.h> #include <mach/cm.h> #include <asm/system.h> #include <asm/leds.h> #include <asm/mach/time.h> -#include "common.h" - static struct amba_pl010_data integrator_uart_data; static struct amba_device rtc_device = { @@ -163,8 +161,8 @@ arch_initcall(integrator_init); * UART0 7 6 * UART1 5 4 */ -#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET) -#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET) +#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC) +#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS) static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { @@ -196,7 +194,7 @@ static struct amba_pl010_data integrator_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET +#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) static DEFINE_SPINLOCK(cm_lock); @@ -217,120 +215,3 @@ void cm_control(u32 mask, u32 set) } EXPORT_SYMBOL(cm_control); - -/* - * Where is the timer (VA)? - */ -#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000) -#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100) -#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200) -#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static unsigned long timer_reload; - -/* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -unsigned long integrator_gettimeoffset(void) -{ - unsigned long ticks1, ticks2, status; - - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for - * an interrupt. We get around this by ensuring that the - * counter has not reloaded between our two reads. - */ - ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; - do { - ticks1 = ticks2; - status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; - } while (ticks2 > ticks1); - - /* - * Number of ticks since last interrupt. - */ - ticks1 = timer_reload - ticks2; - - /* - * Interrupt pending? If so, we've reloaded once already. - */ - if (status & (1 << IRQ_TIMERINT1)) - ticks1 += timer_reload; - - /* - * Convert the ticks to usecs - */ - return TICKS2USECS(ticks1); -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t -integrator_timer_interrupt(int irq, void *dev_id) -{ - /* - * clear the interrupt - */ - writel(1, TIMER1_VA_BASE + TIMER_INTCLR); - - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction integrator_timer_irq = { - .name = "Integrator Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = integrator_timer_interrupt, -}; - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init integrator_time_init(unsigned long reload, unsigned int ctrl) -{ - unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; - - timer_reload = reload; - timer_ctrl |= ctrl; - - if (timer_reload > 0x100000) { - timer_reload >>= 8; - timer_ctrl |= TIMER_CTRL_DIV256; - } else if (timer_reload > 0x010000) { - timer_reload >>= 4; - timer_ctrl |= TIMER_CTRL_DIV16; - } - - /* - * Initialise to a known state (all timers off) - */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); - writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); - writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); - - /* - * Make irqs happen for the system timer - */ - setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); -} diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index 44d4c2e8207..1cb222daa06 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -20,32 +20,39 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/mach-types.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/icst.h> static struct cpufreq_driver integrator_driver; -#define CM_ID (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET) -#define CM_OSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET) -#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET) -#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID) +#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC) +#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT) +#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK) -static const struct icst525_params lclk_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params lclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 8, .vd_max = 132, .rd_min = 24, .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static const struct icst525_params cclk_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params cclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 12, .vd_max = 160, .rd_min = 24, .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; /* @@ -53,17 +60,17 @@ static const struct icst525_params cclk_params = { */ static int integrator_verify_policy(struct cpufreq_policy *policy) { - struct icst525_vco vco; + struct icst_vco vco; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - vco = icst525_khz_to_vco(&cclk_params, policy->max); - policy->max = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); + policy->max = icst_hz(&cclk_params, vco) / 1000; - vco = icst525_khz_to_vco(&cclk_params, policy->min); - policy->min = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); + policy->min = icst_hz(&cclk_params, vco) / 1000; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, @@ -79,7 +86,7 @@ static int integrator_set_target(struct cpufreq_policy *policy, { cpumask_t cpus_allowed; int cpu = policy->cpu; - struct icst525_vco vco; + struct icst_vco vco; struct cpufreq_freqs freqs; u_int cm_osc; @@ -105,17 +112,17 @@ static int integrator_set_target(struct cpufreq_policy *policy, } vco.v = cm_osc & 255; vco.r = 22; - freqs.old = icst525_khz(&cclk_params, vco); + freqs.old = icst_hz(&cclk_params, vco) / 1000; - /* icst525_khz_to_vco rounds down -- so we need the next + /* icst_hz_to_vco rounds down -- so we need the next * larger freq in case of CPUFREQ_RELATION_L. */ if (relation == CPUFREQ_RELATION_L) target_freq += 999; if (target_freq > policy->max) target_freq = policy->max; - vco = icst525_khz_to_vco(&cclk_params, target_freq); - freqs.new = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); + freqs.new = icst_hz(&cclk_params, vco) / 1000; freqs.cpu = policy->cpu; @@ -155,7 +162,7 @@ static unsigned int integrator_get(unsigned int cpu) cpumask_t cpus_allowed; unsigned int current_freq; u_int cm_osc; - struct icst525_vco vco; + struct icst_vco vco; cpus_allowed = current->cpus_allowed; @@ -173,7 +180,7 @@ static unsigned int integrator_get(unsigned int cpu) vco.v = cm_osc & 255; vco.r = 22; - current_freq = icst525_khz(&cclk_params, vco); /* current freq */ + current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ set_cpus_allowed(current, cpus_allowed); diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0058c937719..1a0ee93e451 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -24,7 +24,7 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -40,32 +40,25 @@ struct impd1_module { struct clk_lookup *clks[3]; }; -static const struct icst525_params impd1_vco_params = { - .ref = 24000, /* 24 MHz */ - .vco_max = 200000, /* 200 MHz */ +static const struct icst_params impd1_vco_params = { + .ref = 24000000, /* 24 MHz */ + .vco_max = ICST525_VCO_MAX_3V, + .vco_min = ICST525_VCO_MIN, .vd_min = 12, .vd_max = 519, .rd_min = 3, .rd_max = 120, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static void impd1_setvco(struct clk *clk, struct icst525_vco vco) +static void impd1_setvco(struct clk *clk, struct icst_vco vco) { struct impd1_module *impd1 = clk->data; - int vconr = clk - impd1->vcos; - u32 val; - - val = vco.v | (vco.r << 9) | (vco.s << 16); + u32 val = vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, impd1->base + IMPD1_LOCK); - switch (vconr) { - case 0: - writel(val, impd1->base + IMPD1_OSC1); - break; - case 1: - writel(val, impd1->base + IMPD1_OSC2); - break; - } + writel(val, clk->vcoreg); writel(0, impd1->base + IMPD1_LOCK); #ifdef DEBUG @@ -73,11 +66,17 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco) vco.r = (val >> 9) & 0x7f; vco.s = (val >> 16) & 7; - pr_debug("IM-PD1: VCO%d clock is %ld kHz\n", - vconr, icst525_khz(&impd1_vco_params, vco)); + pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", + vconr, icst525_hz(&impd1_vco_params, vco)); #endif } +static const struct clk_ops impd1_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = impd1_setvco, +}; + void impd1_tweak_control(struct device *dev, u32 mask, u32 val) { struct impd1_module *impd1 = dev_get_drvdata(dev); @@ -373,11 +372,13 @@ static int impd1_probe(struct lm_device *dev) (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { + impd1->vcos[i].ops = &impd1_clk_ops, impd1->vcos[i].owner = THIS_MODULE, impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1, - impd1->vcos[i].setvco = impd1_setvco; + impd1->vcos[i].data = impd1; } + impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; + impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", dev->id); diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h index 9293e410832..bfe07679fae 100644 --- a/arch/arm/mach-integrator/include/mach/clkdev.h +++ b/arch/arm/mach-integrator/include/mach/clkdev.h @@ -2,14 +2,15 @@ #define __ASM_MACH_CLKDEV_H #include <linux/module.h> -#include <asm/hardware/icst525.h> +#include <plat/clock.h> struct clk { unsigned long rate; + const struct clk_ops *ops; struct module *owner; - const struct icst525_params *params; + const struct icst_params *params; + void __iomem *vcoreg; void *data; - void (*setvco)(struct clk *, struct icst525_vco vco); }; static inline int __clk_get(struct clk *clk) diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S index 7649c57acb5..3d029c9f3ef 100644 --- a/arch/arm/mach-integrator/include/mach/entry-macro.S +++ b/arch/arm/mach-integrator/include/mach/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> +#include <mach/platform.h> #include <mach/irqs.h> .macro disable_fiq diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h index d795642fad2..8e26360ce9a 100644 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ b/arch/arm/mach-integrator/include/mach/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/platform.h> /* * Where in virtual memory the IO devices (timers, system controllers @@ -36,17 +35,19 @@ #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR -#ifdef CONFIG_MMU -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) -#else -#define IO_ADDRESS(x) (x) -#endif - #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x6000 #define PCIBIOS_MIN_MEM 0x00100000 +/* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU +#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) +#else +#define IO_ADDRESS(x) (x) +#endif + +#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) + #endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index e00a2624f26..5e6ea5cfea6 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -23,9 +23,6 @@ * * Integrator address map * - * NOTE: This is a multi-hosted header file for use with uHAL and - * supported debuggers. - * * ***********************************************************************/ #ifndef __address_h @@ -290,12 +287,14 @@ #define INTEGRATOR_DBG_LEDS (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET) #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) +#define INTEGRATOR_AP_GPIO_BASE 0x1B000000 /* GPIO */ -#if defined(CONFIG_ARCH_INTEGRATOR_AP) -#define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ -#elif defined(CONFIG_ARCH_INTEGRATOR_CP) -#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ -#endif +#define INTEGRATOR_CP_MMC_BASE 0x1C000000 /* MMC */ +#define INTEGRATOR_CP_AACI_BASE 0x1D000000 /* AACI */ +#define INTEGRATOR_CP_ETH_BASE 0xC8000000 /* Ethernet */ +#define INTEGRATOR_CP_GPIO_BASE 0xC9000000 /* GPIO */ +#define INTEGRATOR_CP_SIC_BASE 0xCA000000 /* SIC */ +#define INTEGRATOR_CP_CTL_BASE 0xCB000000 /* CP system control */ /* ------------------------------------------------------------------------ * KMI keyboard/mouse definitions @@ -328,20 +327,6 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 -#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE - -/* 'export' these to UHAL */ -#define UHAL_PCI_IO PCI_IO_BASE -#define UHAL_PCI_MEM PCI_MEM_BASE -#define UHAL_PCI_ALLOC_IO_BASE 0x00004000 -#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE -#define UHAL_PCI_MAX_SLOT 20 - -/* ======================================================================== - * Start of uHAL definitions - * ======================================================================== - */ - /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ @@ -389,7 +374,7 @@ */ /* ------------------------------------------------------------------------ - * LED's - The header LED is not accessible via the uHAL API + * LED's * ------------------------------------------------------------------------ * */ @@ -402,34 +387,18 @@ #define LED_BANK INTEGRATOR_DBG_LEDS /* - * Memory definitions - run uHAL out of SSRAM. - * - */ -#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI - -/* * Timer definitions * * Only use timer 1 & 2 * (both run at 24MHz and will need the clock divider set to 16). * - * Timer 0 runs at bus frequency and therefore could vary and currently - * uHAL can't handle that. - * + * Timer 0 runs at bus frequency */ #define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 #define TICKS_PER_uSEC 24 /* @@ -437,14 +406,9 @@ * */ #define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) #define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 #endif - -/* END */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 8138a7e2456..227cf4d0508 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -27,9 +27,14 @@ #include <linux/sysdev.h> #include <linux/amba/bus.h> #include <linux/amba/kmi.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> +#include <asm/hardware/arm_timer.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ @@ -43,8 +48,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "common.h" - /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). @@ -55,7 +58,7 @@ #define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) #define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE) #define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET +#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC) /* * Logical Physical @@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .virtual = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE }, { @@ -334,14 +337,163 @@ static void __init ap_init(void) } } +/* + * Where is the timer (VA)? + */ +#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE) + +/* + * How long is the timer interval? + */ +#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) +#if TIMER_INTERVAL >= 0x100000 +#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) +#elif TIMER_INTERVAL >= 0x10000 +#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) +#else +#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) +#endif + +static unsigned long timer_reload; + +static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE; + +static cycle_t timersp_read(struct clocksource *cs) +{ + return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff); +} + +static struct clocksource clocksource_timersp = { + .name = "timer2", + .rating = 200, + .read = timersp_read, + .mask = CLOCKSOURCE_MASK(16), + .shift = 16, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void integrator_clocksource_init(u32 khz) +{ + struct clocksource *cs = &clocksource_timersp; + void __iomem *base = clksrc_base; + u32 ctrl = TIMER_CTRL_ENABLE; + + if (khz >= 1500) { + khz /= 16; + ctrl = TIMER_CTRL_DIV16; + } + + writel(ctrl, base + TIMER_CTRL); + writel(0xffff, base + TIMER_LOAD); + + cs->mult = clocksource_khz2mult(khz, cs->shift); + clocksource_register(cs); +} + +static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; + +/* + * IRQ handler for the timer + */ +static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; + + BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT); + + if (mode == CLOCK_EVT_MODE_PERIODIC) { + writel(ctrl, clkevt_base + TIMER_CTRL); + writel(timer_reload, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + } + + writel(ctrl, clkevt_base + TIMER_CTRL); +} + +static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device integrator_clockevent = { + .name = "timer1", + .shift = 34, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clkevt_set_mode, + .set_next_event = clkevt_set_next_event, + .rating = 300, + .cpumask = cpu_all_mask, +}; + +static struct irqaction integrator_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = integrator_timer_interrupt, + .dev_id = &integrator_clockevent, +}; + +static void integrator_clockevent_init(u32 khz) +{ + struct clock_event_device *evt = &integrator_clockevent; + unsigned int ctrl = 0; + + if (khz * 1000 > 0x100000 * HZ) { + khz /= 256; + ctrl |= TIMER_CTRL_DIV256; + } else if (khz * 1000 > 0x10000 * HZ) { + khz /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + + timer_reload = khz * 1000 / HZ; + writel(ctrl, clkevt_base + TIMER_CTRL); + + evt->irq = IRQ_TIMERINT1; + evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xffff, evt); + evt->min_delta_ns = clockevent_delta2ns(0xf, evt); + + setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); + clockevents_register_device(evt); +} + +/* + * Set up timer(s). + */ static void __init ap_init_timer(void) { - integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0); + u32 khz = TICKS_PER_uSEC * 1000; + + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + + integrator_clocksource_init(khz); + integrator_clockevent_init(khz); } static struct sys_timer ap_timer = { .init = ap_init_timer, - .offset = integrator_gettimeoffset, }; MACHINE_START(INTEGRATOR, "ARM-Integrator") diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 66ef86d6d9e..54edb6b8504 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -25,10 +25,12 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/icst.h> #include <mach/cm.h> #include <mach/lm.h> @@ -39,24 +41,20 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "common.h" - -#define INTCP_PA_MMC_BASE 0x1c000000 -#define INTCP_PA_AACI_BASE 0x1d000000 +#include <plat/timer-sp.h> #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_FLASH_SIZE SZ_32M #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40 +#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40) #define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE IO_ADDRESS(0xca000000) +#define INTCP_VA_SIC_BASE IO_ADDRESS(INTEGRATOR_CP_SIC_BASE) -#define INTCP_PA_ETH_BASE 0xc8000000 #define INTCP_ETH_SIZE 0x10 -#define INTCP_VA_CTRL_BASE IO_ADDRESS(0xcb000000) +#define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -71,7 +69,9 @@ * f1600000 16000000 UART 0 * f1700000 17000000 UART 1 * f1a00000 1a000000 Debug LEDs - * f1b00000 1b000000 GPIO + * fc900000 c9000000 GPIO + * fca00000 ca000000 SIC + * fcb00000 cb000000 CP system control */ static struct map_desc intcp_io_desc[] __initdata = { @@ -116,18 +116,18 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(0xca000000), - .pfn = __phys_to_pfn(0xca000000), + .virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(0xcb000000), - .pfn = __phys_to_pfn(0xcb000000), + .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), .length = SZ_4K, .type = MT_DEVICE } @@ -266,33 +266,43 @@ static void __init intcp_init_irq(void) /* * Clock handling */ -#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c) +#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) -static const struct icst525_params cp_auxvco_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params cp_auxvco_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 8, .vd_max = 263, .rd_min = 3, .rd_max = 65, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco) +static void cp_auxvco_set(struct clk *clk, struct icst_vco vco) { u32 val; - val = readl(CM_AUXOSC) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, CM_LOCK); - writel(val, CM_AUXOSC); + writel(val, clk->vcoreg); writel(0, CM_LOCK); } +static const struct clk_ops cp_auxclk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = cp_auxvco_set, +}; + static struct clk cp_auxclk = { + .ops = &cp_auxclk_ops, .params = &cp_auxvco_params, - .setvco = cp_auxvco_set, + .vcoreg = CM_AUXOSC, }; static struct clk_lookup cp_lookups[] = { @@ -363,8 +373,8 @@ static struct platform_device intcp_flash_device = { static struct resource smc91x_resources[] = { [0] = { - .start = INTCP_PA_ETH_BASE, - .end = INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1, + .start = INTEGRATOR_CP_ETH_BASE, + .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -394,8 +404,8 @@ static struct platform_device *intcp_devs[] __initdata = { */ static unsigned int mmc_status(struct device *dev) { - unsigned int status = readl(IO_ADDRESS(0xca000000) + 4); - writel(8, IO_ADDRESS(0xcb000000) + 8); + unsigned int status = readl(IO_ADDRESS(0xca000000 + 4)); + writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8)); return status & 8; } @@ -413,8 +423,8 @@ static struct amba_device mmc_device = { .platform_data = &mmc_data, }, .res = { - .start = INTCP_PA_MMC_BASE, - .end = INTCP_PA_MMC_BASE + SZ_4K - 1, + .start = INTEGRATOR_CP_MMC_BASE, + .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, @@ -426,8 +436,8 @@ static struct amba_device aaci_device = { .init_name = "mb:1d", }, .res = { - .start = INTCP_PA_AACI_BASE, - .end = INTCP_PA_AACI_BASE + SZ_4K - 1, + .start = INTEGRATOR_CP_AACI_BASE, + .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = { IRQ_CP_AACIINT, NO_IRQ }, @@ -567,16 +577,22 @@ static void __init intcp_init(void) } } -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ +#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) static void __init intcp_timer_init(void) { - integrator_time_init(1000000 / HZ, TIMER_CTRL_IE); + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + + sp804_clocksource_init(TIMER2_VA_BASE); + sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1); } static struct sys_timer cp_timer = { .init = intcp_timer_init, - .offset = integrator_gettimeoffset, }; MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 8dcc823f413..28be186adb8 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/leds.h> #include <asm/system.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 148d25fc636..e5491629c6d 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -30,6 +30,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> #include <asm/signal.h> #include <asm/system.h> @@ -390,9 +391,9 @@ static int __init pci_v3_setup_resources(struct resource **resource) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET) -#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20) -#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24) +#define SC_PCI IO_ADDRESS(INTEGRATOR_SC_PCIENABLE) +#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20) +#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24) static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 2a5c637639b..266b1f58a78 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -177,7 +177,7 @@ static struct plat_serial8250_port n2100_serial_port[] = { .mapbase = N2100_UART, .membase = (char *)N2100_UART, .irq = 0, - .flags = UPF_SKIP_TEST, + .flags = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ, .iotype = UPIO_MEM, .regshift = 0, .uartclk = 1843200, diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 71728d36d50..0bce09799d1 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -21,7 +21,6 @@ #include <linux/tty.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/bootmem.h> #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 3c5e0f522e9..71f3ea62397 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,6 +6,7 @@ config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 select HAS_MTU + select NOMADIK_GPIO endmenu diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 36f67fb207d..a6bbd1a7b4e 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o gpio.o +obj-y += clock.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index ab3712c86d2..841d459ad59 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -32,7 +32,6 @@ #include <mach/setup.h> #include <mach/nand.h> #include <mach/fsmc.h> -#include "clock.h" /* Initial value for SRC control register: all timers use MXTAL/8 source */ #define SRC_CR_INIT_MASK 0x00007fff @@ -202,11 +201,6 @@ static struct amba_device *amba_devs[] __initdata = { &uart1_device, }; -/* We have a fixed clock alone, by now */ -static struct clk nhk8815_clk_48 = { - .rate = 48*1000*1000, -}; - static struct resource nhk8815_eth_resources[] = { { .name = "smc91x-regs", @@ -276,10 +270,8 @@ static void __init nhk8815_platform_init(void) platform_add_devices(nhk8815_platform_devices, ARRAY_SIZE(nhk8815_platform_devices)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name); + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); - } } MACHINE_START(NOMADIK, "NHK8815") diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index 9f92502a008..60f5bee09f2 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -32,14 +32,36 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -/* Create a clock structure with the given name */ -int nmdk_clk_create(struct clk *clk, const char *dev_id) -{ - struct clk_lookup *clkdev; +/* We have a fixed clock alone, for now */ +static struct clk clk_48 = { + .rate = 48 * 1000 * 1000, +}; + +/* + * Catch-all default clock to satisfy drivers using the clk API. We don't + * model the actual hardware clocks yet. + */ +static struct clk clk_default; - clkdev = clkdev_alloc(clk, NULL, dev_id); - if (!clkdev) - return -ENOMEM; - clkdev_add(clkdev); +#define CLK(_clk, dev) \ + { \ + .clk = _clk, \ + .dev_id = dev, \ + } + +static struct clk_lookup lookups[] = { + CLK(&clk_48, "uart0"), + CLK(&clk_48, "uart1"), + CLK(&clk_default, "gpio.0"), + CLK(&clk_default, "gpio.1"), + CLK(&clk_default, "gpio.2"), + CLK(&clk_default, "gpio.3"), +}; + +static int __init clk_init(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } + +arch_initcall(clk_init); diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h index 235faec7f62..5563985a2cc 100644 --- a/arch/arm/mach-nomadik/clock.h +++ b/arch/arm/mach-nomadik/clock.h @@ -11,4 +11,3 @@ struct clk { unsigned long rate; }; -extern int nmdk_clk_create(struct clk *clk, const char *dev_id); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 9bf33b30a02..91c3c901b46 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/platform_device.h> #include <linux/gpio.h> #include <mach/hardware.h> @@ -30,60 +31,66 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + /* The 8815 has 4 GPIO blocks, let's register them immediately */ + +#define GPIO_RESOURCE(block) \ + { \ + .start = NOMADIK_GPIO##block##_BASE, \ + .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define GPIO_DEVICE(block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &cpu8815_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &cpu8815_gpio[block], \ + }, \ + } + static struct nmk_gpio_platform_data cpu8815_gpio[] = { { .name = "GPIO-0-31", .first_gpio = 0, .first_irq = NOMADIK_GPIO_TO_IRQ(0), - .parent_irq = IRQ_GPIO0, }, { .name = "GPIO-32-63", .first_gpio = 32, .first_irq = NOMADIK_GPIO_TO_IRQ(32), - .parent_irq = IRQ_GPIO1, }, { .name = "GPIO-64-95", .first_gpio = 64, .first_irq = NOMADIK_GPIO_TO_IRQ(64), - .parent_irq = IRQ_GPIO2, }, { .name = "GPIO-96-127", /* 124..127 not routed to pin */ .first_gpio = 96, .first_irq = NOMADIK_GPIO_TO_IRQ(96), - .parent_irq = IRQ_GPIO3, } }; -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static struct resource cpu8815_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), +}; -static struct amba_device cpu8815_amba_gpio[] = { - { - .dev = { - .init_name = "gpio0", - .platform_data = cpu8815_gpio + 0, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE), - }, { - .dev = { - .init_name = "gpio1", - .platform_data = cpu8815_gpio + 1, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE), - }, { - .dev = { - .init_name = "gpio2", - .platform_data = cpu8815_gpio + 2, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE), - }, { - .dev = { - .init_name = "gpio3", - .platform_data = cpu8815_gpio + 3, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE), - }, +static struct platform_device cpu8815_platform_gpio[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), }; static struct amba_device cpu8815_amba_rng = { @@ -93,11 +100,14 @@ static struct amba_device cpu8815_amba_rng = { __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), }; +static struct platform_device *platform_devs[] __initdata = { + cpu8815_platform_gpio + 0, + cpu8815_platform_gpio + 1, + cpu8815_platform_gpio + 2, + cpu8815_platform_gpio + 3, +}; + static struct amba_device *amba_devs[] __initdata = { - cpu8815_amba_gpio + 0, - cpu8815_amba_gpio + 1, - cpu8815_amba_gpio + 2, - cpu8815_amba_gpio + 3, &cpu8815_amba_rng }; @@ -105,6 +115,7 @@ static int __init cpu8815_init(void) { int i; + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); return 0; diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h index 61577c9f9a7..7a81a042034 100644 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -1,71 +1,6 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -extern int nmk_gpio_get_mode(int gpio); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int parent_irq; -}; +#include <plat/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index e36639f6615..8e313b4b99a 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/bootmem.h> #include <linux/io.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 23e4d773361..4a1c2328bcc 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -17,8 +17,10 @@ #include <linux/clk.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> +#include <asm/pmu.h> #include <plat/control.h> #include <plat/tc.h> @@ -453,6 +455,37 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif +static struct resource omap2_pmu_resource = { + .start = 3, + .end = 3, + .flags = IORESOURCE_IRQ, +}; + +static struct resource omap3_pmu_resource = { + .start = INT_34XX_BENCH_MPU_EMUL, + .end = INT_34XX_BENCH_MPU_EMUL, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device omap_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, +}; + +static void omap_init_pmu(void) +{ + if (cpu_is_omap24xx()) + omap_pmu_device.resource = &omap2_pmu_resource; + else if (cpu_is_omap34xx()) + omap_pmu_device.resource = &omap3_pmu_resource; + else + return; + + platform_device_register(&omap_pmu_device); +} + + #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { @@ -797,6 +830,7 @@ static int __init omap2_init_devices(void) omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); + omap_init_pmu(); omap_hdq_init(); omap_init_sti(); omap_init_sha1_md5(); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c6649472ce0..aa3e20915d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -43,7 +43,6 @@ #include <linux/err.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/bootmem.h> #include <plat/common.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index e704edb733c..a01b76b7c95 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c deleted file mode 100644 index a7043115de7..00000000000 --- a/arch/arm/mach-realview/clock.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * linux/arch/arm/mach-realview/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst307.h> - -#include "clock.h" - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - struct icst307_vco vco; - vco = icst307_khz_to_vco(clk->params, rate / 1000); - return icst307_khz(clk->params, vco) * 1000; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - - if (clk->setvco) { - struct icst307_vco vco; - - vco = icst307_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst307_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } - return ret; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h deleted file mode 100644 index ebbb0f06b60..00000000000 --- a/arch/arm/mach-realview/clock.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/arch/arm/mach-realview/clock.h - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct module; -struct icst307_params; - -struct clk { - unsigned long rate; - const struct icst307_params *params; - void *data; - void (*setvco)(struct clk *, struct icst307_vco vco); -}; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 90bd4ef71b2..1b468bd490a 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -25,8 +25,6 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/ata_platform.h> @@ -39,7 +37,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst307.h> +#include <asm/hardware/icst.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -48,13 +46,12 @@ #include <asm/hardware/gic.h> +#include <mach/clkdev.h> #include <mach/platform.h> #include <mach/irqs.h> +#include <plat/timer-sp.h> #include "core.h" -#include "clock.h" - -#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; @@ -78,20 +75,6 @@ void __init realview_adjust_zones(int node, unsigned long *size, } #endif -/* - * This is the RealView sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 179s. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v; - - v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125; - do_div(v, 3); - - return v; -} - #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) @@ -273,37 +256,40 @@ struct mmci_platform_data realview_mmc1_plat_data = { /* * Clock handling */ -static const struct icst307_params realview_oscvco_params = { - .ref = 24000, - .vco_max = 200000, +static const struct icst_params realview_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, }; -static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) +static void realview_oscvco_set(struct clk *clk, struct icst_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc; u32 val; - if (machine_is_realview_pb1176()) - sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; - else - sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; - - val = readl(sys_osc) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); - writel(val, sys_osc); + writel(val, clk->vcoreg); writel(0, sys_lock); } +static const struct clk_ops oscvco_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = realview_oscvco_set, +}; + static struct clk oscvco_clk = { + .ops = &oscvco_clk_ops, .params = &realview_oscvco_params, - .setvco = realview_oscvco_set, }; /* @@ -346,7 +332,13 @@ static struct clk_lookup lookups[] = { static int __init clk_init(void) { + if (machine_is_realview_pb1176()) + oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + else + oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + return 0; } arch_initcall(clk_init); @@ -643,133 +635,6 @@ void __iomem *timer2_va_base; void __iomem *timer3_va_base; /* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, timer0_va_base + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL); - - writel(evt, timer0_va_base + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, - .rating = 300, - .cpumask = cpu_all_mask, -}; - -static void __init realview_clockevents_init(unsigned int timer_irq) -{ - timer0_clockevent.irq = timer_irq; - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - clockevents_register_device(&timer0_clockevent); -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - /* clear the interrupt */ - writel(1, timer0_va_base + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction realview_timer_irq = { - .name = "RealView Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = realview_timer_interrupt, -}; - -static cycle_t realview_get_cycles(struct clocksource *cs) -{ - return ~readl(timer3_va_base + TIMER_VALUE); -} - -static struct clocksource clocksource_realview = { - .name = "timer3", - .rating = 200, - .read = realview_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void __init realview_clocksource_init(void) -{ - /* setup timer 0 as free-running clocksource */ - writel(0, timer3_va_base + TIMER_CTRL); - writel(0xffffffff, timer3_va_base + TIMER_LOAD); - writel(0xffffffff, timer3_va_base + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - timer3_va_base + TIMER_CTRL); - - clocksource_realview.mult = - clocksource_khz2mult(1000, clocksource_realview.shift); - clocksource_register(&clocksource_realview); -} - -/* * Set up the clock source and clock events devices */ void __init realview_timer_init(unsigned int timer_irq) @@ -796,13 +661,8 @@ void __init realview_timer_init(unsigned int timer_irq) writel(0, timer2_va_base + TIMER_CTRL); writel(0, timer3_va_base + TIMER_CTRL); - /* - * Make irqs happen for the system timer - */ - setup_irq(timer_irq, &realview_timer_irq); - - realview_clocksource_init(); - realview_clockevents_init(timer_irq); + sp804_clocksource_init(timer3_va_base); + sp804_clockevents_init(timer0_va_base, timer_irq); } /* diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index be048e3e879..f95521a5e5c 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -131,7 +131,7 @@ void platform_cpu_die(unsigned int cpu) cpu_leave_lowpower(); } -int mach_cpu_disable(unsigned int cpu) +int platform_cpu_disable(unsigned int cpu) { /* * we don't allow CPU 0 to be shutdown (it is still too special diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h index 04b37a89801..e58d0771b64 100644 --- a/arch/arm/mach-realview/include/mach/clkdev.h +++ b/arch/arm/mach-realview/include/mach/clkdev.h @@ -1,6 +1,15 @@ #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + #define __clk_get(clk) ({ 1; }) #define __clk_put(clk) do { } while (0) diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 2410d4f8ddd..830055bb862 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -31,6 +31,7 @@ #define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ #define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ #define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */ #define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ #define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ #define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h index 86792a9f2ab..4a88a4edb65 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pba8.h +++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h @@ -23,12 +23,6 @@ #define IRQ_PBA8_GIC_START 32 -/* L220 -#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) -#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) -#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) -*/ - /* * PB-A8 on-board gic irq sources */ @@ -65,6 +59,8 @@ #define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ #define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ +#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */ + /* ... */ #define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) #define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h index deaad4302b1..206a3001f46 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pbx.h +++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h @@ -22,12 +22,6 @@ #define IRQ_PBX_GIC_START 32 -/* L220 -#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) -#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) -#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) -*/ - /* * PBX on-board gic irq sources */ @@ -77,10 +71,10 @@ #define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ #define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ /* ... */ -#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ -#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) -#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) -#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47) /* ... */ #define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 86c0c4435a4..1b77a27bada 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -231,12 +231,6 @@ #define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE REALVIEW_BOOT_ROM_HI - /* * System controller bit assignment */ @@ -249,20 +243,6 @@ #define REALVIEW_TIMER4_EnSel 21 -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - #define REALVIEW_CSR_BASE 0x10000000 #define REALVIEW_CSR_SIZE 0x10000000 diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 7d857d30055..422ccd70d5f 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -31,8 +31,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -44,7 +44,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_eb_io_desc[] __initdata = { { @@ -294,6 +293,36 @@ static struct resource realview_eb_isp1761_resources[] = { }, }; +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_EB11MP_PMU_CPU0, + .end = IRQ_EB11MP_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_EB11MP_PMU_CPU1, + .end = IRQ_EB11MP_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_EB11MP_PMU_CPU2, + .end = IRQ_EB11MP_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_EB11MP_PMU_CPU3, + .end = IRQ_EB11MP_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static void __init gic_init_irq(void) { if (core_tile_eb11mp() || core_tile_a9mp()) { @@ -407,6 +436,7 @@ static void __init realview_eb_init(void) * Bits: .... ...0 0111 1001 0000 .... .... .... */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif + platform_device_register(&pmu_device); } realview_flash_register(&realview_eb_flash_resource, 1); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 44392e51dd5..96568ebfa2b 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -31,8 +31,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -44,7 +44,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pb1176_io_desc[] __initdata = { { @@ -263,6 +262,19 @@ static struct resource realview_pb1176_isp1761_resources[] = { }, }; +static struct resource pmu_resource = { + .start = IRQ_DC1176_CORE_PMU, + .end = IRQ_DC1176_CORE_PMU, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, + .resource = &pmu_resource, +}; + static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ @@ -324,6 +336,7 @@ static void __init realview_pb1176_init(void) realview_eth_register(NULL, realview_pb1176_smsc911x_resources); platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); + platform_device_register(&pmu_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3e02731af95..7fbefbbebaf 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -31,8 +31,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -45,7 +45,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pb11mp_io_desc[] __initdata = { { @@ -260,6 +259,36 @@ static struct resource realview_pb11mp_isp1761_resources[] = { }, }; +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_TC11MP_PMU_CPU0, + .end = IRQ_TC11MP_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_TC11MP_PMU_CPU1, + .end = IRQ_TC11MP_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_TC11MP_PMU_CPU2, + .end = IRQ_TC11MP_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_TC11MP_PMU_CPU3, + .end = IRQ_TC11MP_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static void __init gic_init_irq(void) { unsigned int pldctrl; @@ -329,6 +358,7 @@ static void __init realview_pb11mp_init(void) platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); realview_usb_register(realview_pb11mp_isp1761_resources); + platform_device_register(&pmu_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index fe4e25c4201..d3c113b3dfc 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -30,8 +30,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,7 +42,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pba8_io_desc[] __initdata = { { @@ -250,6 +249,19 @@ static struct resource realview_pba8_isp1761_resources[] = { }, }; +static struct resource pmu_resource = { + .start = IRQ_PBA8_PMU, + .end = IRQ_PBA8_PMU, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, + .resource = &pmu_resource, +}; + static void __init gic_init_irq(void) { /* ARM PB-A8 on-board GIC */ @@ -296,6 +308,7 @@ static void __init realview_pba8_init(void) platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); realview_usb_register(realview_pba8_isp1761_resources); + platform_device_register(&pmu_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index d94857eb069..a235ba30996 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -29,6 +29,7 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/smp_twd.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -270,6 +271,36 @@ static struct resource realview_pbx_isp1761_resources[] = { }, }; +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_PBX_PMU_CPU0, + .end = IRQ_PBX_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_PBX_PMU_CPU1, + .end = IRQ_PBX_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_PBX_PMU_CPU2, + .end = IRQ_PBX_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_PBX_PMU_CPU3, + .end = IRQ_PBX_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static void __init gic_init_irq(void) { /* ARM PBX on-board GIC */ @@ -354,6 +385,7 @@ static void __init realview_pbx_init(void) /* 16KB way size, 8-way associativity, parity disabled * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ l2x0_init(l2x0_base, 0x02520000, 0xc0000fff); + platform_device_register(&pmu_device); } #endif diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig new file mode 100644 index 00000000000..20d1317cc48 --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig @@ -0,0 +1,33 @@ +# +# SPEAr3XX Machine configuration file +# + +if ARCH_SPEAR3XX + +choice + prompt "SPEAr3XX Family" + default MACH_SPEAR300 + +config MACH_SPEAR300 + bool "SPEAr300" + help + Supports ST SPEAr300 Machine + +config MACH_SPEAR310 + bool "SPEAr310" + help + Supports ST SPEAr310 Machine + +config MACH_SPEAR320 + bool "SPEAr320" + help + Supports ST SPEAr320 Machine + +endchoice + +# Adding SPEAr3XX machine specific configuration files +source "arch/arm/mach-spear3xx/Kconfig300" +source "arch/arm/mach-spear3xx/Kconfig310" +source "arch/arm/mach-spear3xx/Kconfig320" + +endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Kconfig300 b/arch/arm/mach-spear3xx/Kconfig300 new file mode 100644 index 00000000000..c519a05b4ab --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig300 @@ -0,0 +1,17 @@ +# +# SPEAr300 machine configuration file +# + +if MACH_SPEAR300 + +choice + prompt "SPEAr300 Boards" + default BOARD_SPEAR300_EVB + +config BOARD_SPEAR300_EVB + bool "SPEAr300 Evaluation Board" + help + Supports ST SPEAr300 Evaluation Board +endchoice + +endif #MACH_SPEAR300 diff --git a/arch/arm/mach-spear3xx/Kconfig310 b/arch/arm/mach-spear3xx/Kconfig310 new file mode 100644 index 00000000000..60e7442d75b --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig310 @@ -0,0 +1,17 @@ +# +# SPEAr310 machine configuration file +# + +if MACH_SPEAR310 + +choice + prompt "SPEAr310 Boards" + default BOARD_SPEAR310_EVB + +config BOARD_SPEAR310_EVB + bool "SPEAr310 Evaluation Board" + help + Supports ST SPEAr310 Evaluation Board +endchoice + +endif #MACH_SPEAR310 diff --git a/arch/arm/mach-spear3xx/Kconfig320 b/arch/arm/mach-spear3xx/Kconfig320 new file mode 100644 index 00000000000..1c1d438399b --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig320 @@ -0,0 +1,17 @@ +# +# SPEAr320 machine configuration file +# + +if MACH_SPEAR320 + +choice + prompt "SPEAr320 Boards" + default BOARD_SPEAR320_EVB + +config BOARD_SPEAR320_EVB + bool "SPEAr320 Evaluation Board" + help + Supports ST SPEAr320 Evaluation Board +endchoice + +endif #MACH_SPEAR320 diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile new file mode 100644 index 00000000000..b2486248970 --- /dev/null +++ b/arch/arm/mach-spear3xx/Makefile @@ -0,0 +1,26 @@ +# +# Makefile for SPEAr3XX machine series +# + +# common files +obj-y += spear3xx.o clock.o + +# spear300 specific files +obj-$(CONFIG_MACH_SPEAR300) += spear300.o + +# spear300 boards files +obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o + + +# spear310 specific files +obj-$(CONFIG_MACH_SPEAR310) += spear310.o + +# spear310 boards files +obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o + + +# spear320 specific files +obj-$(CONFIG_MACH_SPEAR320) += spear320.o + +# spear320 boards files +obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot new file mode 100644 index 00000000000..7a1f3c0eadb --- /dev/null +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c new file mode 100644 index 00000000000..39f6ccf2229 --- /dev/null +++ b/arch/arm/mach-spear3xx/clock.c @@ -0,0 +1,389 @@ +/* + * arch/arm/mach-spear3xx/clock.c + * + * SPEAr3xx machines clock framework source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <mach/misc_regs.h> +#include <plat/clock.h> + +/* root clks */ +/* 32 KHz oscillator clock */ +static struct clk osc_32k_clk = { + .flags = ALWAYS_ENABLED, + .rate = 32000, +}; + +/* 24 MHz oscillator clock */ +static struct clk osc_24m_clk = { + .flags = ALWAYS_ENABLED, + .rate = 24000000, +}; + +/* clock derived from 32 KHz osc clk */ +/* rtc clock */ +static struct clk rtc_clk = { + .pclk = &osc_32k_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = RTC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from 24 MHz osc clk */ +/* pll1 configuration structure */ +static struct pll_clk_config pll1_config = { + .mode_reg = PLL1_CTR, + .cfg_reg = PLL1_FRQ, +}; + +/* PLL1 clock */ +static struct clk pll1_clk = { + .pclk = &osc_24m_clk, + .en_reg = PLL1_CTR, + .en_reg_bit = PLL_ENABLE, + .recalc = &pll1_clk_recalc, + .private_data = &pll1_config, +}; + +/* PLL3 48 MHz clock */ +static struct clk pll3_48m_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_24m_clk, + .rate = 48000000, +}; + +/* watch dog timer clock */ +static struct clk wdt_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_24m_clk, + .recalc = &follow_parent, +}; + +/* clock derived from pll1 clk */ +/* cpu clock */ +static struct clk cpu_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &follow_parent, +}; + +/* ahb configuration structure */ +static struct bus_clk_config ahb_config = { + .reg = CORE_CLK_CFG, + .mask = PLL_HCLK_RATIO_MASK, + .shift = PLL_HCLK_RATIO_SHIFT, +}; + +/* ahb clock */ +static struct clk ahb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &bus_clk_recalc, + .private_data = &ahb_config, +}; + +/* uart configurations */ +static struct aux_clk_config uart_config = { + .synth_reg = UART_CLK_SYNT, +}; + +/* uart parents */ +static struct pclk_info uart_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* uart parent select structure */ +static struct pclk_sel uart_pclk_sel = { + .pclk_info = uart_pclk_info, + .pclk_count = ARRAY_SIZE(uart_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = UART_CLK_MASK, +}; + +/* uart clock */ +static struct clk uart_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = UART_CLK_ENB, + .pclk_sel = &uart_pclk_sel, + .pclk_sel_shift = UART_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &uart_config, +}; + +/* firda configurations */ +static struct aux_clk_config firda_config = { + .synth_reg = FIRDA_CLK_SYNT, +}; + +/* firda parents */ +static struct pclk_info firda_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* firda parent select structure */ +static struct pclk_sel firda_pclk_sel = { + .pclk_info = firda_pclk_info, + .pclk_count = ARRAY_SIZE(firda_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = FIRDA_CLK_MASK, +}; + +/* firda clock */ +static struct clk firda_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = FIRDA_CLK_ENB, + .pclk_sel = &firda_pclk_sel, + .pclk_sel_shift = FIRDA_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &firda_config, +}; + +/* gpt parents */ +static struct pclk_info gpt_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt_pclk_sel = { + .pclk_info = gpt_pclk_info, + .pclk_count = ARRAY_SIZE(gpt_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + +/* gpt0 configurations */ +static struct aux_clk_config gpt0_config = { + .synth_reg = PRSC1_CLK_CFG, +}; + +/* gpt0 timer clock */ +static struct clk gpt0_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT0_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt0_config, +}; + +/* gpt1 configurations */ +static struct aux_clk_config gpt1_config = { + .synth_reg = PRSC2_CLK_CFG, +}; + +/* gpt1 timer clock */ +static struct clk gpt1_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT1_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT1_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt1_config, +}; + +/* gpt2 configurations */ +static struct aux_clk_config gpt2_config = { + .synth_reg = PRSC3_CLK_CFG, +}; + +/* gpt2 timer clock */ +static struct clk gpt2_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT2_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT2_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt2_config, +}; + +/* clock derived from pll3 clk */ +/* usbh clock */ +static struct clk usbh_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBH_CLK_ENB, + .recalc = &follow_parent, +}; + +/* usbd clock */ +static struct clk usbd_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBD_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clcd clock */ +static struct clk clcd_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll3_48m_clk, + .recalc = &follow_parent, +}; + +/* clock derived from ahb clk */ +/* apb configuration structure */ +static struct bus_clk_config apb_config = { + .reg = CORE_CLK_CFG, + .mask = HCLK_PCLK_RATIO_MASK, + .shift = HCLK_PCLK_RATIO_SHIFT, +}; + +/* apb clock */ +static struct clk apb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &bus_clk_recalc, + .private_data = &apb_config, +}; + +/* i2c clock */ +static struct clk i2c_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = I2C_CLK_ENB, + .recalc = &follow_parent, +}; + +/* dma clock */ +static struct clk dma_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = DMA_CLK_ENB, + .recalc = &follow_parent, +}; + +/* jpeg clock */ +static struct clk jpeg_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = JPEG_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gmac clock */ +static struct clk gmac_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GMAC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* smi clock */ +static struct clk smi_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SMI_CLK_ENB, + .recalc = &follow_parent, +}; + +/* c3 clock */ +static struct clk c3_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = C3_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from apb clk */ +/* adc clock */ +static struct clk adc_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = ADC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp clock */ +static struct clk ssp_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gpio clock */ +static struct clk gpio_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPIO_CLK_ENB, + .recalc = &follow_parent, +}; + +/* array of all spear 3xx clock lookups */ +static struct clk_lookup spear_clk_lookups[] = { + /* root clks */ + { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, + { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, + /* clock derived from 32 KHz osc clk */ + { .dev_id = "rtc", .clk = &rtc_clk}, + /* clock derived from 24 MHz osc clk */ + { .con_id = "pll1_clk", .clk = &pll1_clk}, + { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, + { .dev_id = "wdt", .clk = &wdt_clk}, + /* clock derived from pll1 clk */ + { .con_id = "cpu_clk", .clk = &cpu_clk}, + { .con_id = "ahb_clk", .clk = &ahb_clk}, + { .dev_id = "uart", .clk = &uart_clk}, + { .dev_id = "firda", .clk = &firda_clk}, + { .dev_id = "gpt0", .clk = &gpt0_clk}, + { .dev_id = "gpt1", .clk = &gpt1_clk}, + { .dev_id = "gpt2", .clk = &gpt2_clk}, + /* clock derived from pll3 clk */ + { .dev_id = "usbh", .clk = &usbh_clk}, + { .dev_id = "usbd", .clk = &usbd_clk}, + { .dev_id = "clcd", .clk = &clcd_clk}, + /* clock derived from ahb clk */ + { .con_id = "apb_clk", .clk = &apb_clk}, + { .dev_id = "i2c", .clk = &i2c_clk}, + { .dev_id = "dma", .clk = &dma_clk}, + { .dev_id = "jpeg", .clk = &jpeg_clk}, + { .dev_id = "gmac", .clk = &gmac_clk}, + { .dev_id = "smi", .clk = &smi_clk}, + { .dev_id = "c3", .clk = &c3_clk}, + /* clock derived from apb clk */ + { .dev_id = "adc", .clk = &adc_clk}, + { .dev_id = "ssp", .clk = &ssp_clk}, + { .dev_id = "gpio", .clk = &gpio_clk}, +}; + +void __init clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + recalc_root_clocks(); +} diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h new file mode 100644 index 00000000000..a3d07339d9f --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/clkdev.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/clkdev.h + * + * Clock Dev framework definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#include <plat/clkdev.h> + +#endif /* __MACH_CLKDEV_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S new file mode 100644 index 00000000000..590519f10d6 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-spear3xx/include/mach/debug-macro.S + * + * Debugging macro include header spear3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S new file mode 100644 index 00000000000..947625d6b48 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S @@ -0,0 +1,46 @@ +/* + * arch/arm/mach-spear3xx/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/spear.h> +#include <asm/hardware/vic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =VA_SPEAR3XX_ML1_VIC_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status + teq \irqstat, #0 + beq 1001f @ this will set/reset + @ zero register + /* + * Following code will find bit position of least significang + * bit set in irqstat, using following equation + * least significant bit set in n = (n & ~(n-1)) + */ + sub \tmp, \irqstat, #1 @ tmp = irqstat - 1 + mvn \tmp, \tmp @ tmp = ~tmp + and \irqstat, \irqstat, \tmp @ irqstat &= tmp + /* Now, irqstat is = bit no. of 1st bit set in vic irq status */ + clz \tmp, \irqstat @ tmp = leading zeros + rsb \irqnr, \tmp, #0x1F @ irqnr = 32 - tmp - 1 + +1001: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h new file mode 100644 index 00000000000..af7e02c909a --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -0,0 +1,205 @@ +/* + * arch/arm/mach-spear3xx/generic.h + * + * SPEAr3XX machine family generic header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GENERIC_H +#define __MACH_GENERIC_H + +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <plat/padmux.h> + +/* spear3xx declarations */ +/* + * Each GPT has 2 timer channels + * Following GPT channels will be used as clock source and clockevent + */ +#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE +#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 +#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 + +/* Add spear3xx family device structure declarations here */ +extern struct amba_device gpio_device; +extern struct amba_device uart_device; +extern struct sys_timer spear_sys_timer; + +/* Add spear3xx family function declarations here */ +void __init clk_init(void); +void __init spear3xx_map_io(void); +void __init spear3xx_init_irq(void); +void __init spear3xx_init(void); +void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size); + +/* pad mux declarations */ +#define PMX_FIRDA_MASK (1 << 14) +#define PMX_I2C_MASK (1 << 13) +#define PMX_SSP_CS_MASK (1 << 12) +#define PMX_SSP_MASK (1 << 11) +#define PMX_MII_MASK (1 << 10) +#define PMX_GPIO_PIN0_MASK (1 << 9) +#define PMX_GPIO_PIN1_MASK (1 << 8) +#define PMX_GPIO_PIN2_MASK (1 << 7) +#define PMX_GPIO_PIN3_MASK (1 << 6) +#define PMX_GPIO_PIN4_MASK (1 << 5) +#define PMX_GPIO_PIN5_MASK (1 << 4) +#define PMX_UART0_MODEM_MASK (1 << 3) +#define PMX_UART0_MASK (1 << 2) +#define PMX_TIMER_3_4_MASK (1 << 1) +#define PMX_TIMER_1_2_MASK (1 << 0) + +/* pad mux devices */ +extern struct pmx_dev pmx_firda; +extern struct pmx_dev pmx_i2c; +extern struct pmx_dev pmx_ssp_cs; +extern struct pmx_dev pmx_ssp; +extern struct pmx_dev pmx_mii; +extern struct pmx_dev pmx_gpio_pin0; +extern struct pmx_dev pmx_gpio_pin1; +extern struct pmx_dev pmx_gpio_pin2; +extern struct pmx_dev pmx_gpio_pin3; +extern struct pmx_dev pmx_gpio_pin4; +extern struct pmx_dev pmx_gpio_pin5; +extern struct pmx_dev pmx_uart0_modem; +extern struct pmx_dev pmx_uart0; +extern struct pmx_dev pmx_timer_3_4; +extern struct pmx_dev pmx_timer_1_2; + +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* padmux plgpio devices */ +extern struct pmx_dev pmx_plgpio_0_1; +extern struct pmx_dev pmx_plgpio_2_3; +extern struct pmx_dev pmx_plgpio_4_5; +extern struct pmx_dev pmx_plgpio_6_9; +extern struct pmx_dev pmx_plgpio_10_27; +extern struct pmx_dev pmx_plgpio_28; +extern struct pmx_dev pmx_plgpio_29; +extern struct pmx_dev pmx_plgpio_30; +extern struct pmx_dev pmx_plgpio_31; +extern struct pmx_dev pmx_plgpio_32; +extern struct pmx_dev pmx_plgpio_33; +extern struct pmx_dev pmx_plgpio_34_36; +extern struct pmx_dev pmx_plgpio_37_42; +extern struct pmx_dev pmx_plgpio_43_44_47_48; +extern struct pmx_dev pmx_plgpio_45_46_49_50; +#endif + +extern struct pmx_driver pmx_driver; + +/* spear300 declarations */ +#ifdef CONFIG_MACH_SPEAR300 +/* Add spear300 machine device structure declarations here */ +extern struct amba_device gpio1_device; + +/* pad mux modes */ +extern struct pmx_mode nand_mode; +extern struct pmx_mode nor_mode; +extern struct pmx_mode photo_frame_mode; +extern struct pmx_mode lend_ip_phone_mode; +extern struct pmx_mode hend_ip_phone_mode; +extern struct pmx_mode lend_wifi_phone_mode; +extern struct pmx_mode hend_wifi_phone_mode; +extern struct pmx_mode ata_pabx_wi2s_mode; +extern struct pmx_mode ata_pabx_i2s_mode; +extern struct pmx_mode caml_lcdw_mode; +extern struct pmx_mode camu_lcd_mode; +extern struct pmx_mode camu_wlcd_mode; +extern struct pmx_mode caml_lcd_mode; + +/* pad mux devices */ +extern struct pmx_dev pmx_fsmc_2_chips; +extern struct pmx_dev pmx_fsmc_4_chips; +extern struct pmx_dev pmx_keyboard; +extern struct pmx_dev pmx_clcd; +extern struct pmx_dev pmx_telecom_gpio; +extern struct pmx_dev pmx_telecom_tdm; +extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk; +extern struct pmx_dev pmx_telecom_camera; +extern struct pmx_dev pmx_telecom_dac; +extern struct pmx_dev pmx_telecom_i2s; +extern struct pmx_dev pmx_telecom_boot_pins; +extern struct pmx_dev pmx_telecom_sdio_4bit; +extern struct pmx_dev pmx_telecom_sdio_8bit; +extern struct pmx_dev pmx_gpio1; + +void spear300_pmx_init(void); + +/* Add spear300 machine function declarations here */ +void __init spear300_init(void); + +#endif /* CONFIG_MACH_SPEAR300 */ + +/* spear310 declarations */ +#ifdef CONFIG_MACH_SPEAR310 +/* Add spear310 machine device structure declarations here */ + +/* pad mux devices */ +extern struct pmx_dev pmx_emi_cs_0_1_4_5; +extern struct pmx_dev pmx_emi_cs_2_3; +extern struct pmx_dev pmx_uart1; +extern struct pmx_dev pmx_uart2; +extern struct pmx_dev pmx_uart3_4_5; +extern struct pmx_dev pmx_fsmc; +extern struct pmx_dev pmx_rs485_0_1; +extern struct pmx_dev pmx_tdm0; + +void spear310_pmx_init(void); + +/* Add spear310 machine function declarations here */ +void __init spear310_init(void); + +#endif /* CONFIG_MACH_SPEAR310 */ + +/* spear320 declarations */ +#ifdef CONFIG_MACH_SPEAR320 +/* Add spear320 machine device structure declarations here */ + +/* pad mux modes */ +extern struct pmx_mode auto_net_smii_mode; +extern struct pmx_mode auto_net_mii_mode; +extern struct pmx_mode auto_exp_mode; +extern struct pmx_mode small_printers_mode; + +/* pad mux devices */ +extern struct pmx_dev pmx_clcd; +extern struct pmx_dev pmx_emi; +extern struct pmx_dev pmx_fsmc; +extern struct pmx_dev pmx_spp; +extern struct pmx_dev pmx_sdio; +extern struct pmx_dev pmx_i2s; +extern struct pmx_dev pmx_uart1; +extern struct pmx_dev pmx_uart1_modem; +extern struct pmx_dev pmx_uart2; +extern struct pmx_dev pmx_touchscreen; +extern struct pmx_dev pmx_can; +extern struct pmx_dev pmx_sdio_led; +extern struct pmx_dev pmx_pwm0; +extern struct pmx_dev pmx_pwm1; +extern struct pmx_dev pmx_pwm2; +extern struct pmx_dev pmx_pwm3; +extern struct pmx_dev pmx_ssp1; +extern struct pmx_dev pmx_ssp2; +extern struct pmx_dev pmx_mii1; +extern struct pmx_dev pmx_smii0; +extern struct pmx_dev pmx_smii1; +extern struct pmx_dev pmx_i2c1; + +void spear320_pmx_init(void); + +/* Add spear320 machine function declarations here */ +void __init spear320_init(void); + +#endif /* CONFIG_MACH_SPEAR320 */ + +#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h new file mode 100644 index 00000000000..451b2081bfc --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/gpio.h + * + * GPIO macros for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +#include <plat/gpio.h> + +#endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h new file mode 100644 index 00000000000..4a86e6a3c44 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-spear3xx/include/mach/hardware.h + * + * Hardware definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* Vitual to physical translation of statically mapped space */ +#define IO_ADDRESS(x) (x | 0xF0000000) + +#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/io.h b/arch/arm/mach-spear3xx/include/mach/io.h new file mode 100644 index 00000000000..30cff8a1f6b --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/io.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/io.h + * + * IO definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#include <plat/io.h> + +#endif /* __MACH_IO_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h new file mode 100644 index 00000000000..7f940b81847 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -0,0 +1,152 @@ +/* + * arch/arm/mach-spear3xx/include/mach/irqs.h + * + * IRQ helper macros for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +/* SPEAr3xx IRQ definitions */ +#define IRQ_HW_ACCEL_MOD_0 0 +#define IRQ_INTRCOMM_RAS_ARM 1 +#define IRQ_CPU_GPT1_1 2 +#define IRQ_CPU_GPT1_2 3 +#define IRQ_BASIC_GPT1_1 4 +#define IRQ_BASIC_GPT1_2 5 +#define IRQ_BASIC_GPT2_1 6 +#define IRQ_BASIC_GPT2_2 7 +#define IRQ_BASIC_DMA 8 +#define IRQ_BASIC_SMI 9 +#define IRQ_BASIC_RTC 10 +#define IRQ_BASIC_GPIO 11 +#define IRQ_BASIC_WDT 12 +#define IRQ_DDR_CONTROLLER 13 +#define IRQ_SYS_ERROR 14 +#define IRQ_WAKEUP_RCV 15 +#define IRQ_JPEG 16 +#define IRQ_IRDA 17 +#define IRQ_ADC 18 +#define IRQ_UART 19 +#define IRQ_SSP 20 +#define IRQ_I2C 21 +#define IRQ_MAC_1 22 +#define IRQ_MAC_2 23 +#define IRQ_USB_DEV 24 +#define IRQ_USB_H_OHCI_0 25 +#define IRQ_USB_H_EHCI_0 26 +#define IRQ_USB_H_EHCI_1 IRQ_USB_H_EHCI_0 +#define IRQ_USB_H_OHCI_1 27 +#define IRQ_GEN_RAS_1 28 +#define IRQ_GEN_RAS_2 29 +#define IRQ_GEN_RAS_3 30 +#define IRQ_HW_ACCEL_MOD_1 31 +#define IRQ_VIC_END 32 + +#define VIRQ_START IRQ_VIC_END + +/* SPEAr300 Virtual irq definitions */ +#ifdef CONFIG_MACH_SPEAR300 +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_IT_PERS_S (VIRQ_START + 0) +#define VIRQ_IT_CHANGE_S (VIRQ_START + 1) +#define VIRQ_I2S (VIRQ_START + 2) +#define VIRQ_TDM (VIRQ_START + 3) +#define VIRQ_CAMERA_L (VIRQ_START + 4) +#define VIRQ_CAMERA_F (VIRQ_START + 5) +#define VIRQ_CAMERA_V (VIRQ_START + 6) +#define VIRQ_KEYBOARD (VIRQ_START + 7) +#define VIRQ_GPIO1 (VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define IRQ_CLCD IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9) +#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8) + +/* SPEAr310 Virtual irq definitions */ +#elif defined(CONFIG_MACH_SPEAR310) +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_SMII0 (VIRQ_START + 0) +#define VIRQ_SMII1 (VIRQ_START + 1) +#define VIRQ_SMII2 (VIRQ_START + 2) +#define VIRQ_SMII3 (VIRQ_START + 3) +#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 4) +#define VIRQ_WAKEUP_SMII1 (VIRQ_START + 5) +#define VIRQ_WAKEUP_SMII2 (VIRQ_START + 6) +#define VIRQ_WAKEUP_SMII3 (VIRQ_START + 7) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define VIRQ_UART1 (VIRQ_START + 8) +#define VIRQ_UART2 (VIRQ_START + 9) +#define VIRQ_UART3 (VIRQ_START + 10) +#define VIRQ_UART4 (VIRQ_START + 11) +#define VIRQ_UART5 (VIRQ_START + 12) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define VIRQ_EMI (VIRQ_START + 13) +#define VIRQ_PLGPIO (VIRQ_START + 14) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define VIRQ_TDM_HDLC (VIRQ_START + 15) +#define VIRQ_RS485_0 (VIRQ_START + 16) +#define VIRQ_RS485_1 (VIRQ_START + 17) + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 18) + +/* SPEAr320 Virtual irq definitions */ +#else +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_EMI (VIRQ_START + 0) +#define VIRQ_CLCD (VIRQ_START + 1) +#define VIRQ_SPP (VIRQ_START + 2) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define IRQ_SDIO IRQ_GEN_RAS_2 + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define VIRQ_PLGPIO (VIRQ_START + 3) +#define VIRQ_I2S_PLAY (VIRQ_START + 4) +#define VIRQ_I2S_REC (VIRQ_START + 5) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define VIRQ_CANU (VIRQ_START + 6) +#define VIRQ_CANL (VIRQ_START + 7) +#define VIRQ_UART1 (VIRQ_START + 8) +#define VIRQ_UART2 (VIRQ_START + 9) +#define VIRQ_SSP1 (VIRQ_START + 10) +#define VIRQ_SSP2 (VIRQ_START + 11) +#define VIRQ_SMII0 (VIRQ_START + 12) +#define VIRQ_MII1_SMII1 (VIRQ_START + 13) +#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 14) +#define VIRQ_WAKEUP_MII1_SMII1 (VIRQ_START + 15) +#define VIRQ_I2C (VIRQ_START + 16) + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 17) + +#endif + +/* PLGPIO Virtual IRQs */ +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +#define SPEAR_PLGPIO_INT_BASE (SPEAR_GPIO_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_PLGPIO_INT_BASE + 102) +#endif + +#define VIRQ_END SPEAR_GPIO_INT_END +#define NR_IRQS VIRQ_END + +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h new file mode 100644 index 00000000000..51735221ea1 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/memory.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/memory.h + * + * Memory map for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#include <plat/memory.h> + +#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h new file mode 100644 index 00000000000..38d767a1aba --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -0,0 +1,163 @@ +/* + * arch/arm/mach-spear3xx/include/mach/misc_regs.h + * + * Miscellaneous registers definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MISC_REGS_H +#define __MACH_MISC_REGS_H + +#include <mach/spear.h> + +#define MISC_BASE VA_SPEAR3XX_ICM3_MISC_REG_BASE + +#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000)) +#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004)) +#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008)) +#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C)) +#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010)) +#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014)) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018)) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C)) +#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020)) +#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024)) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028)) +/* PERIP_CLK_CFG register masks */ +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 11 +#define GPT2_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_MASK 0 +#define AUX_CLK_PLL1_MASK 1 + +#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C)) +/* PERIP1_CLK_ENB register masks */ +#define UART_CLK_ENB 3 +#define SSP_CLK_ENB 5 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FIRDA_CLK_ENB 10 +#define GPT1_CLK_ENB 11 +#define GPT2_CLK_ENB 12 +#define ADC_CLK_ENB 15 +#define RTC_CLK_ENB 17 +#define GPIO_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH_CLK_ENB 25 +#define C3_CLK_ENB 31 + +#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030)) +#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034)) +#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038)) +/* PERIP1_SOF_RST register masks */ +#define JPEG_SOF_RST 8 + +#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C)) +#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040)) +#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044)) +#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048)) +#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C)) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050)) +#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054)) +#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C)) +#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060)) +#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064)) +#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068)) +#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C)) +#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070)) +#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074)) +#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078)) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF + +#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C)) +#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080)) +#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084)) +#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088)) +#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C)) +#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090)) +#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094)) +#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098)) +#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C)) +#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0)) +#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4)) +#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8)) +#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC)) +#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0)) +#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4)) +#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8)) +#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC)) +#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0)) +#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4)) +#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8)) +#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC)) +#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0)) +#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4)) +#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8)) +#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC)) +#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0)) +#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4)) +#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8)) +#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC)) +#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100)) +#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104)) +#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108)) +#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C)) +#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110)) +#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114)) +#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118)) +#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C)) + +#endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h new file mode 100644 index 00000000000..dcca8568a48 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -0,0 +1,144 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear.h + * + * SPEAr3xx Machine family specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR3XX_H +#define __MACH_SPEAR3XX_H + +#include <mach/hardware.h> +#include <mach/spear300.h> +#include <mach/spear310.h> +#include <mach/spear320.h> + +#define SPEAR3XX_ML_SDRAM_BASE 0x00000000 +#define SPEAR3XX_ML_SDRAM_SIZE 0x40000000 + +#define SPEAR3XX_ICM9_BASE 0xC0000000 +#define SPEAR3XX_ICM9_SIZE 0x10000000 + +/* ICM1 - Low speed connection */ +#define SPEAR3XX_ICM1_2_BASE 0xD0000000 +#define SPEAR3XX_ICM1_2_SIZE 0x10000000 + +#define SPEAR3XX_ICM1_UART_BASE 0xD0000000 +#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE) +#define SPEAR3XX_ICM1_UART_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_ADC_BASE 0xD0080000 +#define SPEAR3XX_ICM1_ADC_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_SSP_BASE 0xD0100000 +#define SPEAR3XX_ICM1_SSP_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_I2C_BASE 0xD0180000 +#define SPEAR3XX_ICM1_I2C_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_JPEG_BASE 0xD0800000 +#define SPEAR3XX_ICM1_JPEG_SIZE 0x00800000 + +#define SPEAR3XX_ICM1_IRDA_BASE 0xD1000000 +#define SPEAR3XX_ICM1_IRDA_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_SRAM_BASE 0xD2800000 +#define SPEAR3XX_ICM1_SRAM_SIZE 0x05800000 + +/* ICM2 - Application Subsystem */ +#define SPEAR3XX_ICM2_HWACCEL0_BASE 0xD8800000 +#define SPEAR3XX_ICM2_HWACCEL0_SIZE 0x00800000 + +#define SPEAR3XX_ICM2_HWACCEL1_BASE 0xD9000000 +#define SPEAR3XX_ICM2_HWACCEL1_SIZE 0x00800000 + +/* ICM4 - High Speed Connection */ +#define SPEAR3XX_ICM4_BASE 0xE0000000 +#define SPEAR3XX_ICM4_SIZE 0x08000000 + +#define SPEAR3XX_ICM4_MII_BASE 0xE0800000 +#define SPEAR3XX_ICM4_MII_SIZE 0x00800000 + +#define SPEAR3XX_ICM4_USBD_FIFO_BASE 0xE1000000 +#define SPEAR3XX_ICM4_USBD_FIFO_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USBD_CSR_BASE 0xE1100000 +#define SPEAR3XX_ICM4_USBD_CSR_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USBD_PLDT_BASE 0xE1200000 +#define SPEAR3XX_ICM4_USBD_PLDT_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE 0xE1800000 +#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_OHCI0_BASE 0xE1900000 +#define SPEAR3XX_ICM4_USB_OHCI0_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_OHCI1_BASE 0xE2100000 +#define SPEAR3XX_ICM4_USB_OHCI1_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_ARB_BASE 0xE2800000 +#define SPEAR3XX_ICM4_USB_ARB_SIZE 0x00010000 + +/* ML1 - Multi Layer CPU Subsystem */ +#define SPEAR3XX_ICM3_ML1_2_BASE 0xF0000000 +#define SPEAR3XX_ICM3_ML1_2_SIZE 0x0F000000 + +#define SPEAR3XX_ML1_TMR_BASE 0xF0000000 +#define SPEAR3XX_ML1_TMR_SIZE 0x00100000 + +#define SPEAR3XX_ML1_VIC_BASE 0xF1100000 +#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE) +#define SPEAR3XX_ML1_VIC_SIZE 0x00100000 + +/* ICM3 - Basic Subsystem */ +#define SPEAR3XX_ICM3_SMEM_BASE 0xF8000000 +#define SPEAR3XX_ICM3_SMEM_SIZE 0x04000000 + +#define SPEAR3XX_ICM3_SMI_CTRL_BASE 0xFC000000 +#define SPEAR3XX_ICM3_SMI_CTRL_SIZE 0x00200000 + +#define SPEAR3XX_ICM3_DMA_BASE 0xFC400000 +#define SPEAR3XX_ICM3_DMA_SIZE 0x00200000 + +#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE 0xFC600000 +#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE 0x00200000 + +#define SPEAR3XX_ICM3_TMR0_BASE 0xFC800000 +#define SPEAR3XX_ICM3_TMR0_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_WDT_BASE 0xFC880000 +#define SPEAR3XX_ICM3_WDT_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_RTC_BASE 0xFC900000 +#define SPEAR3XX_ICM3_RTC_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_GPIO_BASE 0xFC980000 +#define SPEAR3XX_ICM3_GPIO_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_SYS_CTRL_BASE 0xFCA00000 +#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE) +#define SPEAR3XX_ICM3_SYS_CTRL_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_MISC_REG_BASE 0xFCA80000 +#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE) +#define SPEAR3XX_ICM3_MISC_REG_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_TMR1_BASE 0xFCB00000 +#define SPEAR3XX_ICM3_TMR1_SIZE 0x00080000 + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_SPEAR3XX_ICM1_UART_BASE + +/* Sysctl base for spear platform */ +#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE +#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE + +#endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h new file mode 100644 index 00000000000..ccaa76522ee --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear300.h @@ -0,0 +1,83 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear300.h + * + * SPEAr300 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR300 + +#ifndef __MACH_SPEAR300_H +#define __MACH_SPEAR300_H + +/* Base address of various IPs */ +#define SPEAR300_TELECOM_BASE 0x50000000 +#define SPEAR300_TELECOM_SIZE 0x10000000 + +/* Interrupt registers offsets and masks */ +#define SPEAR300_TELECOM_REG_SIZE 0x00010000 +#define INT_ENB_MASK_REG 0x54 +#define INT_STS_MASK_REG 0x58 +#define IT_PERS_S_IRQ_MASK (1 << 0) +#define IT_CHANGE_S_IRQ_MASK (1 << 1) +#define I2S_IRQ_MASK (1 << 2) +#define TDM_IRQ_MASK (1 << 3) +#define CAMERA_L_IRQ_MASK (1 << 4) +#define CAMERA_F_IRQ_MASK (1 << 5) +#define CAMERA_V_IRQ_MASK (1 << 6) +#define KEYBOARD_IRQ_MASK (1 << 7) +#define GPIO1_IRQ_MASK (1 << 8) + +#define SHIRQ_RAS1_MASK 0x1FF + +#define SPEAR300_CLCD_BASE 0x60000000 +#define SPEAR300_CLCD_SIZE 0x10000000 + +#define SPEAR300_SDIO_BASE 0x70000000 +#define SPEAR300_SDIO_SIZE 0x10000000 + +#define SPEAR300_NAND_0_BASE 0x80000000 +#define SPEAR300_NAND_0_SIZE 0x04000000 + +#define SPEAR300_NAND_1_BASE 0x84000000 +#define SPEAR300_NAND_1_SIZE 0x04000000 + +#define SPEAR300_NAND_2_BASE 0x88000000 +#define SPEAR300_NAND_2_SIZE 0x04000000 + +#define SPEAR300_NAND_3_BASE 0x8c000000 +#define SPEAR300_NAND_3_SIZE 0x04000000 + +#define SPEAR300_NOR_0_BASE 0x90000000 +#define SPEAR300_NOR_0_SIZE 0x01000000 + +#define SPEAR300_NOR_1_BASE 0x91000000 +#define SPEAR300_NOR_1_SIZE 0x01000000 + +#define SPEAR300_NOR_2_BASE 0x92000000 +#define SPEAR300_NOR_2_SIZE 0x01000000 + +#define SPEAR300_NOR_3_BASE 0x93000000 +#define SPEAR300_NOR_3_SIZE 0x01000000 + +#define SPEAR300_FSMC_BASE 0x94000000 +#define SPEAR300_FSMC_SIZE 0x05000000 + +#define SPEAR300_SOC_CONFIG_BASE 0x99000000 +#define SPEAR300_SOC_CONFIG_SIZE 0x00000008 + +#define SPEAR300_KEYBOARD_BASE 0xA0000000 +#define SPEAR300_KEYBOARD_SIZE 0x09000000 + +#define SPEAR300_GPIO_BASE 0xA9000000 +#define SPEAR300_GPIO_SIZE 0x07000000 + +#endif /* __MACH_SPEAR300_H */ + +#endif /* CONFIG_MACH_SPEAR300 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h new file mode 100644 index 00000000000..b27bb8af330 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear310.h @@ -0,0 +1,70 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear310.h + * + * SPEAr310 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR310 + +#ifndef __MACH_SPEAR310_H +#define __MACH_SPEAR310_H + +#define SPEAR310_NAND_BASE 0x40000000 +#define SPEAR310_NAND_SIZE 0x04000000 + +#define SPEAR310_FSMC_BASE 0x44000000 +#define SPEAR310_FSMC_SIZE 0x01000000 + +#define SPEAR310_UART1_BASE 0xB2000000 +#define SPEAR310_UART2_BASE 0xB2080000 +#define SPEAR310_UART3_BASE 0xB2100000 +#define SPEAR310_UART4_BASE 0xB2180000 +#define SPEAR310_UART5_BASE 0xB2200000 +#define SPEAR310_UART_SIZE 0x00080000 + +#define SPEAR310_HDLC_BASE 0xB2800000 +#define SPEAR310_HDLC_SIZE 0x00800000 + +#define SPEAR310_RS485_0_BASE 0xB3000000 +#define SPEAR310_RS485_0_SIZE 0x00800000 + +#define SPEAR310_RS485_1_BASE 0xB3800000 +#define SPEAR310_RS485_1_SIZE 0x00800000 + +#define SPEAR310_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR310_SOC_CONFIG_SIZE 0x00000070 +/* Interrupt registers offsets and masks */ +#define INT_STS_MASK_REG 0x04 +#define SMII0_IRQ_MASK (1 << 0) +#define SMII1_IRQ_MASK (1 << 1) +#define SMII2_IRQ_MASK (1 << 2) +#define SMII3_IRQ_MASK (1 << 3) +#define WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define UART1_IRQ_MASK (1 << 8) +#define UART2_IRQ_MASK (1 << 9) +#define UART3_IRQ_MASK (1 << 10) +#define UART4_IRQ_MASK (1 << 11) +#define UART5_IRQ_MASK (1 << 12) +#define EMI_IRQ_MASK (1 << 13) +#define TDM_HDLC_IRQ_MASK (1 << 14) +#define RS485_0_IRQ_MASK (1 << 15) +#define RS485_1_IRQ_MASK (1 << 16) + +#define SHIRQ_RAS1_MASK 0x000FF +#define SHIRQ_RAS2_MASK 0x01F00 +#define SHIRQ_RAS3_MASK 0x02000 +#define SHIRQ_INTRCOMM_RAS_MASK 0x1C000 + +#endif /* __MACH_SPEAR310_H */ + +#endif /* CONFIG_MACH_SPEAR310 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h new file mode 100644 index 00000000000..cacf17a958c --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear320.h + * + * SPEAr320 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR320 + +#ifndef __MACH_SPEAR320_H +#define __MACH_SPEAR320_H + +#define SPEAR320_EMI_CTRL_BASE 0x40000000 +#define SPEAR320_EMI_CTRL_SIZE 0x08000000 + +#define SPEAR320_FSMC_BASE 0x4C000000 +#define SPEAR320_FSMC_SIZE 0x01000000 + +#define SPEAR320_I2S_BASE 0x60000000 +#define SPEAR320_I2S_SIZE 0x10000000 + +#define SPEAR320_SDIO_BASE 0x70000000 +#define SPEAR320_SDIO_SIZE 0x10000000 + +#define SPEAR320_CLCD_BASE 0x90000000 +#define SPEAR320_CLCD_SIZE 0x10000000 + +#define SPEAR320_PAR_PORT_BASE 0xA0000000 +#define SPEAR320_PAR_PORT_SIZE 0x01000000 + +#define SPEAR320_CAN0_BASE 0xA1000000 +#define SPEAR320_CAN0_SIZE 0x01000000 + +#define SPEAR320_CAN1_BASE 0xA2000000 +#define SPEAR320_CAN1_SIZE 0x01000000 + +#define SPEAR320_UART1_BASE 0xA3000000 +#define SPEAR320_UART2_BASE 0xA4000000 +#define SPEAR320_UART_SIZE 0x01000000 + +#define SPEAR320_SSP0_BASE 0xA5000000 +#define SPEAR320_SSP0_SIZE 0x01000000 + +#define SPEAR320_SSP1_BASE 0xA6000000 +#define SPEAR320_SSP1_SIZE 0x01000000 + +#define SPEAR320_I2C_BASE 0xA7000000 +#define SPEAR320_I2C_SIZE 0x01000000 + +#define SPEAR320_PWM_BASE 0xA8000000 +#define SPEAR320_PWM_SIZE 0x01000000 + +#define SPEAR320_SMII0_BASE 0xAA000000 +#define SPEAR320_SMII0_SIZE 0x01000000 + +#define SPEAR320_SMII1_BASE 0xAB000000 +#define SPEAR320_SMII1_SIZE 0x01000000 + +#define SPEAR320_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR320_SOC_CONFIG_SIZE 0x00000070 +/* Interrupt registers offsets and masks */ +#define INT_STS_MASK_REG 0x04 +#define INT_CLR_MASK_REG 0x04 +#define INT_ENB_MASK_REG 0x08 +#define GPIO_IRQ_MASK (1 << 0) +#define I2S_PLAY_IRQ_MASK (1 << 1) +#define I2S_REC_IRQ_MASK (1 << 2) +#define EMI_IRQ_MASK (1 << 7) +#define CLCD_IRQ_MASK (1 << 8) +#define SPP_IRQ_MASK (1 << 9) +#define SDIO_IRQ_MASK (1 << 10) +#define CAN_U_IRQ_MASK (1 << 11) +#define CAN_L_IRQ_MASK (1 << 12) +#define UART1_IRQ_MASK (1 << 13) +#define UART2_IRQ_MASK (1 << 14) +#define SSP1_IRQ_MASK (1 << 15) +#define SSP2_IRQ_MASK (1 << 16) +#define SMII0_IRQ_MASK (1 << 17) +#define MII1_SMII1_IRQ_MASK (1 << 18) +#define WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define I2C1_IRQ_MASK (1 << 21) + +#define SHIRQ_RAS1_MASK 0x000380 +#define SHIRQ_RAS3_MASK 0x000007 +#define SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 + +#endif /* __MACH_SPEAR320_H */ + +#endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h new file mode 100644 index 00000000000..92cee6335c9 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/system.h + * + * SPEAr3xx Machine family specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <plat/system.h> + +#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h new file mode 100644 index 00000000000..a38cc9de876 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/timex.h + * + * SPEAr3XX machine family specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +#include <plat/timex.h> + +#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h new file mode 100644 index 00000000000..53ba8bbc0df --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#include <plat/uncompress.h> + +#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h new file mode 100644 index 00000000000..df977b3c9a6 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/vmalloc.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/vmalloc.h + * + * Defining Vmalloc area for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_VMALLOC_H +#define __MACH_VMALLOC_H + +#include <plat/vmalloc.h> + +#endif /* __MACH_VMALLOC_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c new file mode 100644 index 00000000000..3560f8c1e72 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear300.c @@ -0,0 +1,468 @@ +/* + * arch/arm/mach-spear3xx/spear300.c + * + * SPEAr300 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> +#include <plat/shirq.h> + +/* pad multiplexing support */ +/* muxing registers */ +#define PAD_MUX_CONFIG_REG 0x00 +#define MODE_CONFIG_REG 0x04 + +/* modes */ +#define NAND_MODE (1 << 0) +#define NOR_MODE (1 << 1) +#define PHOTO_FRAME_MODE (1 << 2) +#define LEND_IP_PHONE_MODE (1 << 3) +#define HEND_IP_PHONE_MODE (1 << 4) +#define LEND_WIFI_PHONE_MODE (1 << 5) +#define HEND_WIFI_PHONE_MODE (1 << 6) +#define ATA_PABX_WI2S_MODE (1 << 7) +#define ATA_PABX_I2S_MODE (1 << 8) +#define CAML_LCDW_MODE (1 << 9) +#define CAMU_LCD_MODE (1 << 10) +#define CAMU_WLCD_MODE (1 << 11) +#define CAML_LCD_MODE (1 << 12) +#define ALL_MODES 0x1FFF + +struct pmx_mode nand_mode = { + .id = NAND_MODE, + .name = "nand mode", + .mask = 0x00, +}; + +struct pmx_mode nor_mode = { + .id = NOR_MODE, + .name = "nor mode", + .mask = 0x01, +}; + +struct pmx_mode photo_frame_mode = { + .id = PHOTO_FRAME_MODE, + .name = "photo frame mode", + .mask = 0x02, +}; + +struct pmx_mode lend_ip_phone_mode = { + .id = LEND_IP_PHONE_MODE, + .name = "lend ip phone mode", + .mask = 0x03, +}; + +struct pmx_mode hend_ip_phone_mode = { + .id = HEND_IP_PHONE_MODE, + .name = "hend ip phone mode", + .mask = 0x04, +}; + +struct pmx_mode lend_wifi_phone_mode = { + .id = LEND_WIFI_PHONE_MODE, + .name = "lend wifi phone mode", + .mask = 0x05, +}; + +struct pmx_mode hend_wifi_phone_mode = { + .id = HEND_WIFI_PHONE_MODE, + .name = "hend wifi phone mode", + .mask = 0x06, +}; + +struct pmx_mode ata_pabx_wi2s_mode = { + .id = ATA_PABX_WI2S_MODE, + .name = "ata pabx wi2s mode", + .mask = 0x07, +}; + +struct pmx_mode ata_pabx_i2s_mode = { + .id = ATA_PABX_I2S_MODE, + .name = "ata pabx i2s mode", + .mask = 0x08, +}; + +struct pmx_mode caml_lcdw_mode = { + .id = CAML_LCDW_MODE, + .name = "caml lcdw mode", + .mask = 0x0C, +}; + +struct pmx_mode camu_lcd_mode = { + .id = CAMU_LCD_MODE, + .name = "camu lcd mode", + .mask = 0x0D, +}; + +struct pmx_mode camu_wlcd_mode = { + .id = CAMU_WLCD_MODE, + .name = "camu wlcd mode", + .mask = 0x0E, +}; + +struct pmx_mode caml_lcd_mode = { + .id = CAML_LCD_MODE, + .name = "caml lcd mode", + .mask = 0x0F, +}; + +/* devices */ +struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { + { + .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_fsmc_2_chips = { + .name = "fsmc_2_chips", + .modes = pmx_fsmc_2_chips_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { + { + .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, + .mask = PMX_FIRDA_MASK | PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_fsmc_4_chips = { + .name = "fsmc_4_chips", + .modes = pmx_fsmc_4_chips_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_keyboard_modes[] = { + { + .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | + LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | + CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE | + CAML_LCD_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_keyboard = { + .name = "keyboard", + .modes = pmx_keyboard_modes, + .mode_count = ARRAY_SIZE(pmx_keyboard_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_clcd_modes[] = { + { + .ids = PHOTO_FRAME_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK , + }, { + .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE | + CAMU_LCD_MODE | CAML_LCD_MODE, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_clcd = { + .name = "clcd", + .modes = pmx_clcd_modes, + .mode_count = ARRAY_SIZE(pmx_clcd_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_gpio_modes[] = { + { + .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE, + .mask = PMX_MII_MASK, + }, { + .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, { + .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK, + }, { + .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK, + }, { + .ids = ATA_PABX_WI2S_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK + | PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_telecom_gpio = { + .name = "telecom_gpio", + .modes = pmx_telecom_gpio_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_tdm_modes[] = { + { + .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE + | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE + | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_telecom_tdm = { + .name = "telecom_tdm", + .modes = pmx_telecom_tdm_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { + { + .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | + LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE + | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | + CAML_LCDW_MODE | CAML_LCD_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_telecom_spi_cs_i2c_clk = { + .name = "telecom_spi_cs_i2c_clk", + .modes = pmx_telecom_spi_cs_i2c_clk_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_camera_modes[] = { + { + .ids = CAML_LCDW_MODE | CAML_LCD_MODE, + .mask = PMX_MII_MASK, + }, { + .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_telecom_camera = { + .name = "telecom_camera", + .modes = pmx_telecom_camera_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_dac_modes[] = { + { + .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_telecom_dac = { + .name = "telecom_dac", + .modes = pmx_telecom_dac_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_i2s_modes[] = { + { + .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE + | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | + ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_telecom_i2s = { + .name = "telecom_i2s", + .modes = pmx_telecom_i2s_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { + { + .ids = NAND_MODE | NOR_MODE, + .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | + PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_telecom_boot_pins = { + .name = "telecom_boot_pins", + .modes = pmx_telecom_boot_pins_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = { + { + .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | + HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | + CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE | + ATA_PABX_I2S_MODE, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | + PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_telecom_sdio_4bit = { + .name = "telecom_sdio_4bit", + .modes = pmx_telecom_sdio_4bit_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = { + { + .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | + HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | + CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | + PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_telecom_sdio_8bit = { + .name = "telecom_sdio_8bit", + .modes = pmx_telecom_sdio_8bit_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_gpio1_modes[] = { + { + .ids = PHOTO_FRAME_MODE, + .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | + PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_gpio1 = { + .name = "arm gpio1", + .modes = pmx_gpio1_modes, + .mode_count = ARRAY_SIZE(pmx_gpio1_modes), + .enb_on_reset = 1, +}; + +/* pmx driver structure */ +struct pmx_driver pmx_driver = { + .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f}, + .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, +}; + +/* Add spear300 specific devices here */ +/* arm gpio1 device registeration */ +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = SPEAR_GPIO1_INT_BASE, +}; + +struct amba_device gpio1_device = { + .dev = { + .init_name = "gpio1", + .platform_data = &gpio1_plat_data, + }, + .res = { + .start = SPEAR300_GPIO_BASE, + .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {VIRQ_GPIO1, NO_IRQ}, +}; + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_IT_PERS_S, + .enb_mask = IT_PERS_S_IRQ_MASK, + .status_mask = IT_PERS_S_IRQ_MASK, + }, { + .virq = VIRQ_IT_CHANGE_S, + .enb_mask = IT_CHANGE_S_IRQ_MASK, + .status_mask = IT_CHANGE_S_IRQ_MASK, + }, { + .virq = VIRQ_I2S, + .enb_mask = I2S_IRQ_MASK, + .status_mask = I2S_IRQ_MASK, + }, { + .virq = VIRQ_TDM, + .enb_mask = TDM_IRQ_MASK, + .status_mask = TDM_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_L, + .enb_mask = CAMERA_L_IRQ_MASK, + .status_mask = CAMERA_L_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_F, + .enb_mask = CAMERA_F_IRQ_MASK, + .status_mask = CAMERA_F_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_V, + .enb_mask = CAMERA_V_IRQ_MASK, + .status_mask = CAMERA_V_IRQ_MASK, + }, { + .virq = VIRQ_KEYBOARD, + .enb_mask = KEYBOARD_IRQ_MASK, + .status_mask = KEYBOARD_IRQ_MASK, + }, { + .virq = VIRQ_GPIO1, + .enb_mask = GPIO1_IRQ_MASK, + .status_mask = GPIO1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = INT_ENB_MASK_REG, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = -1, + }, +}; + +/* spear300 routines */ +void __init spear300_init(void) +{ + int ret = 0; + + /* call spear3xx family common init function */ + spear3xx_init(); + + /* shared irq registeration */ + shirq_ras1.regs.base = + ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE); + if (shirq_ras1.regs.base) { + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ\n"); + } +} + +void spear300_pmx_init(void) +{ + spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE, + SPEAR300_SOC_CONFIG_SIZE); +} diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c new file mode 100644 index 00000000000..bb21db152a2 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear300_evb.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-spear3xx/spear300_evb.c + * + * SPEAr300 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* padmux devices to enable */ +static struct pmx_dev *pmx_devs[] = { + /* spear3xx specific devices */ + &pmx_i2c, + &pmx_ssp_cs, + &pmx_ssp, + &pmx_mii, + &pmx_uart0, + + /* spear300 specific devices */ + &pmx_fsmc_2_chips, + &pmx_clcd, + &pmx_telecom_sdio_4bit, + &pmx_gpio1, +}; + +static struct amba_device *amba_devs[] __initdata = { + /* spear3xx specific devices */ + &gpio_device, + &uart_device, + + /* spear300 specific devices */ + &gpio1_device, +}; + +static struct platform_device *plat_devs[] __initdata = { + /* spear3xx specific devices */ + + /* spear300 specific devices */ +}; + +static void __init spear300_evb_init(void) +{ + unsigned int i; + + /* call spear300 machine init function */ + spear300_init(); + + /* padmux initialization */ + pmx_driver.mode = &photo_frame_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); + spear300_pmx_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") + .boot_params = 0x00000100, + .map_io = spear3xx_map_io, + .init_irq = spear3xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear300_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c new file mode 100644 index 00000000000..96a1ab824ba --- /dev/null +++ b/arch/arm/mach-spear3xx/spear310.c @@ -0,0 +1,302 @@ +/* + * arch/arm/mach-spear3xx/spear310.c + * + * SPEAr310 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> +#include <plat/shirq.h> + +/* pad multiplexing support */ +/* muxing registers */ +#define PAD_MUX_CONFIG_REG 0x08 + +/* devices */ +struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_emi_cs_0_1_4_5 = { + .name = "emi_cs_0_1_4_5", + .modes = pmx_emi_cs_0_1_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_emi_cs_2_3 = { + .name = "emi_cs_2_3", + .modes = pmx_emi_cs_2_3_modes, + .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart1_modes[] = { + { + .ids = 0x00, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_uart1 = { + .name = "uart1", + .modes = pmx_uart1_modes, + .mode_count = ARRAY_SIZE(pmx_uart1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart2_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_uart2 = { + .name = "uart2", + .modes = pmx_uart2_modes, + .mode_count = ARRAY_SIZE(pmx_uart2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart3_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_uart3_4_5 = { + .name = "uart3_4_5", + .modes = pmx_uart3_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_fsmc_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_fsmc = { + .name = "fsmc", + .modes = pmx_fsmc_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_rs485_0_1_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_rs485_0_1 = { + .name = "rs485_0_1", + .modes = pmx_rs485_0_1_modes, + .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_tdm0_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_tdm0 = { + .name = "tdm0", + .modes = pmx_tdm0_modes, + .mode_count = ARRAY_SIZE(pmx_tdm0_modes), + .enb_on_reset = 1, +}; + +/* pmx driver structure */ +struct pmx_driver pmx_driver = { + .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, +}; + +/* Add spear310 specific devices here */ + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_SMII0, + .status_mask = SMII0_IRQ_MASK, + }, { + .virq = VIRQ_SMII1, + .status_mask = SMII1_IRQ_MASK, + }, { + .virq = VIRQ_SMII2, + .status_mask = SMII2_IRQ_MASK, + }, { + .virq = VIRQ_SMII3, + .status_mask = SMII3_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII0, + .status_mask = WAKEUP_SMII0_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII1, + .status_mask = WAKEUP_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII2, + .status_mask = WAKEUP_SMII2_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII3, + .status_mask = WAKEUP_SMII3_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_ras2_config[] = { + { + .virq = VIRQ_UART1, + .status_mask = UART1_IRQ_MASK, + }, { + .virq = VIRQ_UART2, + .status_mask = UART2_IRQ_MASK, + }, { + .virq = VIRQ_UART3, + .status_mask = UART3_IRQ_MASK, + }, { + .virq = VIRQ_UART4, + .status_mask = UART4_IRQ_MASK, + }, { + .virq = VIRQ_UART5, + .status_mask = UART5_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras2 = { + .irq = IRQ_GEN_RAS_2, + .dev_config = shirq_ras2_config, + .dev_count = ARRAY_SIZE(shirq_ras2_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS2_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_ras3_config[] = { + { + .virq = VIRQ_EMI, + .status_mask = EMI_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras3 = { + .irq = IRQ_GEN_RAS_3, + .dev_config = shirq_ras3_config, + .dev_count = ARRAY_SIZE(shirq_ras3_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS3_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_intrcomm_ras_config[] = { + { + .virq = VIRQ_TDM_HDLC, + .status_mask = TDM_HDLC_IRQ_MASK, + }, { + .virq = VIRQ_RS485_0, + .status_mask = RS485_0_IRQ_MASK, + }, { + .virq = VIRQ_RS485_1, + .status_mask = RS485_1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_intrcomm_ras = { + .irq = IRQ_INTRCOMM_RAS_ARM, + .dev_config = shirq_intrcomm_ras_config, + .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = -1, + }, +}; + +/* spear310 routines */ +void __init spear310_init(void) +{ + void __iomem *base; + int ret = 0; + + /* call spear3xx family common init function */ + spear3xx_init(); + + /* shared irq registeration */ + base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE); + if (base) { + /* shirq 1 */ + shirq_ras1.regs.base = base; + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 1\n"); + + /* shirq 2 */ + shirq_ras2.regs.base = base; + ret = spear_shirq_register(&shirq_ras2); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 2\n"); + + /* shirq 3 */ + shirq_ras3.regs.base = base; + ret = spear_shirq_register(&shirq_ras3); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 3\n"); + + /* shirq 4 */ + shirq_intrcomm_ras.regs.base = base; + ret = spear_shirq_register(&shirq_intrcomm_ras); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 4\n"); + } +} + +void spear310_pmx_init(void) +{ + spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE, + SPEAR310_SOC_CONFIG_SIZE); +} diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c new file mode 100644 index 00000000000..7facf664319 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear310_evb.c @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-spear3xx/spear310_evb.c + * + * SPEAr310 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* padmux devices to enable */ +static struct pmx_dev *pmx_devs[] = { + /* spear3xx specific devices */ + &pmx_i2c, + &pmx_ssp, + &pmx_gpio_pin0, + &pmx_gpio_pin1, + &pmx_gpio_pin2, + &pmx_gpio_pin3, + &pmx_gpio_pin4, + &pmx_gpio_pin5, + &pmx_uart0, + + /* spear310 specific devices */ + &pmx_emi_cs_0_1_4_5, + &pmx_emi_cs_2_3, + &pmx_uart1, + &pmx_uart2, + &pmx_uart3_4_5, + &pmx_fsmc, + &pmx_rs485_0_1, + &pmx_tdm0, +}; + +static struct amba_device *amba_devs[] __initdata = { + /* spear3xx specific devices */ + &gpio_device, + &uart_device, + + /* spear310 specific devices */ +}; + +static struct platform_device *plat_devs[] __initdata = { + /* spear3xx specific devices */ + + /* spear310 specific devices */ +}; + +static void __init spear310_evb_init(void) +{ + unsigned int i; + + /* call spear310 machine init function */ + spear310_init(); + + /* padmux initialization */ + pmx_driver.mode = NULL; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); + spear310_pmx_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") + .boot_params = 0x00000100, + .map_io = spear3xx_map_io, + .init_irq = spear3xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear310_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c new file mode 100644 index 00000000000..6a121954936 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear320.c @@ -0,0 +1,549 @@ +/* + * arch/arm/mach-spear3xx/spear320.c + * + * SPEAr320 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> +#include <plat/shirq.h> + +/* pad multiplexing support */ +/* muxing registers */ +#define PAD_MUX_CONFIG_REG 0x0C +#define MODE_CONFIG_REG 0x10 + +/* modes */ +#define AUTO_NET_SMII_MODE (1 << 0) +#define AUTO_NET_MII_MODE (1 << 1) +#define AUTO_EXP_MODE (1 << 2) +#define SMALL_PRINTERS_MODE (1 << 3) +#define ALL_MODES 0xF + +struct pmx_mode auto_net_smii_mode = { + .id = AUTO_NET_SMII_MODE, + .name = "Automation Networking SMII Mode", + .mask = 0x00, +}; + +struct pmx_mode auto_net_mii_mode = { + .id = AUTO_NET_MII_MODE, + .name = "Automation Networking MII Mode", + .mask = 0x01, +}; + +struct pmx_mode auto_exp_mode = { + .id = AUTO_EXP_MODE, + .name = "Automation Expanded Mode", + .mask = 0x02, +}; + +struct pmx_mode small_printers_mode = { + .id = SMALL_PRINTERS_MODE, + .name = "Small Printers Mode", + .mask = 0x03, +}; + +/* devices */ +struct pmx_dev_mode pmx_clcd_modes[] = { + { + .ids = AUTO_NET_SMII_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_clcd = { + .name = "clcd", + .modes = pmx_clcd_modes, + .mode_count = ARRAY_SIZE(pmx_clcd_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_emi_modes[] = { + { + .ids = AUTO_EXP_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_emi = { + .name = "emi", + .modes = pmx_emi_modes, + .mode_count = ARRAY_SIZE(pmx_emi_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_fsmc_modes[] = { + { + .ids = ALL_MODES, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_fsmc = { + .name = "fsmc", + .modes = pmx_fsmc_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_spp_modes[] = { + { + .ids = SMALL_PRINTERS_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_spp = { + .name = "spp", + .modes = pmx_spp_modes, + .mode_count = ARRAY_SIZE(pmx_spp_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_sdio_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | + SMALL_PRINTERS_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_sdio = { + .name = "sdio", + .modes = pmx_sdio_modes, + .mode_count = ARRAY_SIZE(pmx_sdio_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_i2s_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_i2s = { + .name = "i2s", + .modes = pmx_i2s_modes, + .mode_count = ARRAY_SIZE(pmx_i2s_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart1_modes[] = { + { + .ids = ALL_MODES, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_uart1 = { + .name = "uart1", + .modes = pmx_uart1_modes, + .mode_count = ARRAY_SIZE(pmx_uart1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart1_modem_modes[] = { + { + .ids = AUTO_EXP_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | + PMX_SSP_CS_MASK, + }, { + .ids = SMALL_PRINTERS_MODE, + .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK | + PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_uart1_modem = { + .name = "uart1_modem", + .modes = pmx_uart1_modem_modes, + .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart2_modes[] = { + { + .ids = ALL_MODES, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_uart2 = { + .name = "uart2", + .modes = pmx_uart2_modes, + .mode_count = ARRAY_SIZE(pmx_uart2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_touchscreen_modes[] = { + { + .ids = AUTO_NET_SMII_MODE, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_touchscreen = { + .name = "touchscreen", + .modes = pmx_touchscreen_modes, + .mode_count = ARRAY_SIZE(pmx_touchscreen_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_can_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE, + .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_can = { + .name = "can", + .modes = pmx_can_modes, + .mode_count = ARRAY_SIZE(pmx_can_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_sdio_led_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_sdio_led = { + .name = "sdio_led", + .modes = pmx_sdio_led_modes, + .mode_count = ARRAY_SIZE(pmx_sdio_led_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm0_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm0 = { + .name = "pwm0", + .modes = pmx_pwm0_modes, + .mode_count = ARRAY_SIZE(pmx_pwm0_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm1_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm1 = { + .name = "pwm1", + .modes = pmx_pwm1_modes, + .mode_count = ARRAY_SIZE(pmx_pwm1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm2_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_SSP_CS_MASK, + }, { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm2 = { + .name = "pwm2", + .modes = pmx_pwm2_modes, + .mode_count = ARRAY_SIZE(pmx_pwm2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm3_modes[] = { + { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm3 = { + .name = "pwm3", + .modes = pmx_pwm3_modes, + .mode_count = ARRAY_SIZE(pmx_pwm3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_ssp1_modes[] = { + { + .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_ssp1 = { + .name = "ssp1", + .modes = pmx_ssp1_modes, + .mode_count = ARRAY_SIZE(pmx_ssp1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_ssp2_modes[] = { + { + .ids = AUTO_NET_SMII_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_ssp2 = { + .name = "ssp2", + .modes = pmx_ssp2_modes, + .mode_count = ARRAY_SIZE(pmx_ssp2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_mii1_modes[] = { + { + .ids = AUTO_NET_MII_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_mii1 = { + .name = "mii1", + .modes = pmx_mii1_modes, + .mode_count = ARRAY_SIZE(pmx_mii1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_smii0_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_smii0 = { + .name = "smii0", + .modes = pmx_smii0_modes, + .mode_count = ARRAY_SIZE(pmx_smii0_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_smii1_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_smii1 = { + .name = "smii1", + .modes = pmx_smii1_modes, + .mode_count = ARRAY_SIZE(pmx_smii1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_i2c1_modes[] = { + { + .ids = AUTO_EXP_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_i2c1 = { + .name = "i2c1", + .modes = pmx_i2c1_modes, + .mode_count = ARRAY_SIZE(pmx_i2c1_modes), + .enb_on_reset = 1, +}; + +/* pmx driver structure */ +struct pmx_driver pmx_driver = { + .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007}, + .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, +}; + +/* Add spear320 specific devices here */ + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_EMI, + .status_mask = EMI_IRQ_MASK, + .clear_mask = EMI_IRQ_MASK, + }, { + .virq = VIRQ_CLCD, + .status_mask = CLCD_IRQ_MASK, + .clear_mask = CLCD_IRQ_MASK, + }, { + .virq = VIRQ_SPP, + .status_mask = SPP_IRQ_MASK, + .clear_mask = SPP_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +struct shirq_dev_config shirq_ras3_config[] = { + { + .virq = VIRQ_PLGPIO, + .enb_mask = GPIO_IRQ_MASK, + .status_mask = GPIO_IRQ_MASK, + .clear_mask = GPIO_IRQ_MASK, + }, { + .virq = VIRQ_I2S_PLAY, + .enb_mask = I2S_PLAY_IRQ_MASK, + .status_mask = I2S_PLAY_IRQ_MASK, + .clear_mask = I2S_PLAY_IRQ_MASK, + }, { + .virq = VIRQ_I2S_REC, + .enb_mask = I2S_REC_IRQ_MASK, + .status_mask = I2S_REC_IRQ_MASK, + .clear_mask = I2S_REC_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras3 = { + .irq = IRQ_GEN_RAS_3, + .dev_config = shirq_ras3_config, + .dev_count = ARRAY_SIZE(shirq_ras3_config), + .regs = { + .enb_reg = INT_ENB_MASK_REG, + .reset_to_enb = 1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS3_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +struct shirq_dev_config shirq_intrcomm_ras_config[] = { + { + .virq = VIRQ_CANU, + .status_mask = CAN_U_IRQ_MASK, + .clear_mask = CAN_U_IRQ_MASK, + }, { + .virq = VIRQ_CANL, + .status_mask = CAN_L_IRQ_MASK, + .clear_mask = CAN_L_IRQ_MASK, + }, { + .virq = VIRQ_UART1, + .status_mask = UART1_IRQ_MASK, + .clear_mask = UART1_IRQ_MASK, + }, { + .virq = VIRQ_UART2, + .status_mask = UART2_IRQ_MASK, + .clear_mask = UART2_IRQ_MASK, + }, { + .virq = VIRQ_SSP1, + .status_mask = SSP1_IRQ_MASK, + .clear_mask = SSP1_IRQ_MASK, + }, { + .virq = VIRQ_SSP2, + .status_mask = SSP2_IRQ_MASK, + .clear_mask = SSP2_IRQ_MASK, + }, { + .virq = VIRQ_SMII0, + .status_mask = SMII0_IRQ_MASK, + .clear_mask = SMII0_IRQ_MASK, + }, { + .virq = VIRQ_MII1_SMII1, + .status_mask = MII1_SMII1_IRQ_MASK, + .clear_mask = MII1_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII0, + .status_mask = WAKEUP_SMII0_IRQ_MASK, + .clear_mask = WAKEUP_SMII0_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_MII1_SMII1, + .status_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + .clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_I2C, + .status_mask = I2C1_IRQ_MASK, + .clear_mask = I2C1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_intrcomm_ras = { + .irq = IRQ_INTRCOMM_RAS_ARM, + .dev_config = shirq_intrcomm_ras_config, + .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +/* spear320 routines */ +void __init spear320_init(void) +{ + void __iomem *base; + int ret = 0; + + /* call spear3xx family common init function */ + spear3xx_init(); + + /* shared irq registeration */ + base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE); + if (base) { + /* shirq 1 */ + shirq_ras1.regs.base = base; + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 1\n"); + + /* shirq 3 */ + shirq_ras3.regs.base = base; + ret = spear_shirq_register(&shirq_ras3); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 3\n"); + + /* shirq 4 */ + shirq_intrcomm_ras.regs.base = base; + ret = spear_shirq_register(&shirq_intrcomm_ras); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 4\n"); + } +} + +void spear320_pmx_init(void) +{ + spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE, + SPEAR320_SOC_CONFIG_SIZE); +} diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c new file mode 100644 index 00000000000..62ac685a413 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear320_evb.c @@ -0,0 +1,81 @@ +/* + * arch/arm/mach-spear3xx/spear320_evb.c + * + * SPEAr320 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* padmux devices to enable */ +static struct pmx_dev *pmx_devs[] = { + /* spear3xx specific devices */ + &pmx_i2c, + &pmx_ssp, + &pmx_mii, + &pmx_uart0, + + /* spear320 specific devices */ + &pmx_fsmc, + &pmx_sdio, + &pmx_i2s, + &pmx_uart1, + &pmx_uart2, + &pmx_can, + &pmx_pwm0, + &pmx_pwm1, + &pmx_pwm2, + &pmx_mii1, +}; + +static struct amba_device *amba_devs[] __initdata = { + /* spear3xx specific devices */ + &gpio_device, + &uart_device, + + /* spear320 specific devices */ +}; + +static struct platform_device *plat_devs[] __initdata = { + /* spear3xx specific devices */ + + /* spear320 specific devices */ +}; + +static void __init spear320_evb_init(void) +{ + unsigned int i; + + /* call spear320 machine init function */ + spear320_init(); + + /* padmux initialization */ + pmx_driver.mode = &auto_net_mii_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); + spear320_pmx_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") + .boot_params = 0x00000100, + .map_io = spear3xx_map_io, + .init_irq = spear3xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear320_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c new file mode 100644 index 00000000000..e87313aeae2 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -0,0 +1,548 @@ +/* + * arch/arm/mach-spear3xx/spear3xx.c + * + * SPEAr3XX machines common source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/ptrace.h> +#include <linux/io.h> +#include <asm/hardware/vic.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear3xx machines common devices here */ +/* gpio device registeration */ +static struct pl061_platform_data gpio_plat_data = { + .gpio_base = 0, + .irq_base = SPEAR_GPIO_INT_BASE, +}; + +struct amba_device gpio_device = { + .dev = { + .init_name = "gpio", + .platform_data = &gpio_plat_data, + }, + .res = { + .start = SPEAR3XX_ICM3_GPIO_BASE, + .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_BASIC_GPIO, NO_IRQ}, +}; + +/* uart device registeration */ +struct amba_device uart_device = { + .dev = { + .init_name = "uart", + }, + .res = { + .start = SPEAR3XX_ICM1_UART_BASE, + .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART, NO_IRQ}, +}; + +/* Do spear3xx familiy common initialization part here */ +void __init spear3xx_init(void) +{ + /* nothing to do for now */ +} + +/* This will initialize vic */ +void __init spear3xx_init_irq(void) +{ + vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); +} + +/* Following will create static virtual/physical mappings */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_UART_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), + .length = SPEAR3XX_ICM1_UART_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ML1_VIC_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), + .length = SPEAR3XX_ML1_VIC_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), + .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), + .length = SPEAR3XX_ICM3_MISC_REG_SIZE, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); + + /* This will initialize clock framework */ + clk_init(); +} + +/* pad multiplexing support */ +/* devices */ +struct pmx_dev_mode pmx_firda_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_firda = { + .name = "firda", + .modes = pmx_firda_modes, + .mode_count = ARRAY_SIZE(pmx_firda_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_i2c_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_I2C_MASK, + }, +}; + +struct pmx_dev pmx_i2c = { + .name = "i2c", + .modes = pmx_i2c_modes, + .mode_count = ARRAY_SIZE(pmx_i2c_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_ssp_cs_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_ssp_cs = { + .name = "ssp_chip_selects", + .modes = pmx_ssp_cs_modes, + .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_ssp_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_SSP_MASK, + }, +}; + +struct pmx_dev pmx_ssp = { + .name = "ssp", + .modes = pmx_ssp_modes, + .mode_count = ARRAY_SIZE(pmx_ssp_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_mii_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_mii = { + .name = "mii", + .modes = pmx_mii_modes, + .mode_count = ARRAY_SIZE(pmx_mii_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin0_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN0_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin0 = { + .name = "gpio_pin0", + .modes = pmx_gpio_pin0_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin1_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin1 = { + .name = "gpio_pin1", + .modes = pmx_gpio_pin1_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin2_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN2_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin2 = { + .name = "gpio_pin2", + .modes = pmx_gpio_pin2_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin3_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN3_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin3 = { + .name = "gpio_pin3", + .modes = pmx_gpio_pin3_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin4_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN4_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin4 = { + .name = "gpio_pin4", + .modes = pmx_gpio_pin4_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin5_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin5 = { + .name = "gpio_pin5", + .modes = pmx_gpio_pin5_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_uart0_modem_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_uart0_modem = { + .name = "uart0_modem", + .modes = pmx_uart0_modem_modes, + .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_uart0_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_uart0 = { + .name = "uart0", + .modes = pmx_uart0_modes, + .mode_count = ARRAY_SIZE(pmx_uart0_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_timer_3_4_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_timer_3_4 = { + .name = "timer_3_4", + .modes = pmx_timer_3_4_modes, + .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_timer_1_2_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_timer_1_2 = { + .name = "timer_1_2", + .modes = pmx_timer_1_2_modes, + .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes), + .enb_on_reset = 0, +}; + +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* plgpios devices */ +struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { + { + .ids = 0x00, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_0_1 = { + .name = "plgpio 0 and 1", + .modes = pmx_plgpio_0_1_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_2_3 = { + .name = "plgpio 2 and 3", + .modes = pmx_plgpio_2_3_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_I2C_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_4_5 = { + .name = "plgpio 4 and 5", + .modes = pmx_plgpio_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_6_9 = { + .name = "plgpio 6 to 9", + .modes = pmx_plgpio_6_9_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_10_27 = { + .name = "plgpio 10 to 27", + .modes = pmx_plgpio_10_27_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_28_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN0_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_28 = { + .name = "plgpio 28", + .modes = pmx_plgpio_28_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_29_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_29 = { + .name = "plgpio 29", + .modes = pmx_plgpio_29_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_30_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN2_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_30 = { + .name = "plgpio 30", + .modes = pmx_plgpio_30_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_31_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN3_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_31 = { + .name = "plgpio 31", + .modes = pmx_plgpio_31_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_32_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN4_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_32 = { + .name = "plgpio 32", + .modes = pmx_plgpio_32_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_33_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_33 = { + .name = "plgpio 33", + .modes = pmx_plgpio_33_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_34_36 = { + .name = "plgpio 34 to 36", + .modes = pmx_plgpio_34_36_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_37_42 = { + .name = "plgpio 37 to 42", + .modes = pmx_plgpio_37_42_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_43_44_47_48 = { + .name = "plgpio 43, 44, 47 and 48", + .modes = pmx_plgpio_43_44_47_48_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_45_46_49_50 = { + .name = "plgpio 45, 46, 49 and 50", + .modes = pmx_plgpio_45_46_49_50_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), + .enb_on_reset = 1, +}; + +#endif + +/* spear padmux initialization function */ +void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size) +{ + int ret = 0; + + /* pad mux initialization */ + pmx_driver->base = ioremap(base, size); + if (!pmx_driver->base) { + ret = -ENOMEM; + goto pmx_fail; + } + + ret = pmx_register(pmx_driver); + iounmap(pmx_driver->base); + +pmx_fail: + if (ret) + printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + ret); +} diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig new file mode 100644 index 00000000000..bddba034f86 --- /dev/null +++ b/arch/arm/mach-spear6xx/Kconfig @@ -0,0 +1,20 @@ +# +# SPEAr6XX Machine configuration file +# + +if ARCH_SPEAR6XX + +choice + prompt "SPEAr6XX Family" + default MACH_SPEAR600 + +config MACH_SPEAR600 + bool "SPEAr600" + help + Supports ST SPEAr600 Machine +endchoice + +# Adding SPEAr6XX machine specific configuration files +source "arch/arm/mach-spear6xx/Kconfig600" + +endif #ARCH_SPEAR6XX diff --git a/arch/arm/mach-spear6xx/Kconfig600 b/arch/arm/mach-spear6xx/Kconfig600 new file mode 100644 index 00000000000..9e19f65eb78 --- /dev/null +++ b/arch/arm/mach-spear6xx/Kconfig600 @@ -0,0 +1,17 @@ +# +# SPEAr600 machine configuration file +# + +if MACH_SPEAR600 + +choice + prompt "SPEAr600 Boards" + default BOARD_SPEAR600_EVB + +config BOARD_SPEAR600_EVB + bool "SPEAr600 Evaluation Board" + help + Supports ST SPEAr600 Evaluation Board +endchoice + +endif #MACH_SPEAR600 diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile new file mode 100644 index 00000000000..cc1a4d82d45 --- /dev/null +++ b/arch/arm/mach-spear6xx/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for SPEAr6XX machine series +# + +# common files +obj-y += clock.o spear6xx.o + +# spear600 specific files +obj-$(CONFIG_MACH_SPEAR600) += spear600.o + +# spear600 boards files +obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot new file mode 100644 index 00000000000..7a1f3c0eadb --- /dev/null +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c new file mode 100644 index 00000000000..13e27c76968 --- /dev/null +++ b/arch/arm/mach-spear6xx/clock.c @@ -0,0 +1,483 @@ +/* + * arch/arm/mach-spear6xx/clock.c + * + * SPEAr6xx machines clock framework source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <mach/misc_regs.h> +#include <plat/clock.h> + +/* root clks */ +/* 32 KHz oscillator clock */ +static struct clk osc_32k_clk = { + .flags = ALWAYS_ENABLED, + .rate = 32000, +}; + +/* 30 MHz oscillator clock */ +static struct clk osc_30m_clk = { + .flags = ALWAYS_ENABLED, + .rate = 30000000, +}; + +/* clock derived from 32 KHz osc clk */ +/* rtc clock */ +static struct clk rtc_clk = { + .pclk = &osc_32k_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = RTC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from 30 MHz osc clk */ +/* pll1 configuration structure */ +static struct pll_clk_config pll1_config = { + .mode_reg = PLL1_CTR, + .cfg_reg = PLL1_FRQ, +}; + +/* PLL1 clock */ +static struct clk pll1_clk = { + .pclk = &osc_30m_clk, + .en_reg = PLL1_CTR, + .en_reg_bit = PLL_ENABLE, + .recalc = &pll1_clk_recalc, + .private_data = &pll1_config, +}; + +/* PLL3 48 MHz clock */ +static struct clk pll3_48m_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_30m_clk, + .rate = 48000000, +}; + +/* watch dog timer clock */ +static struct clk wdt_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_30m_clk, + .recalc = &follow_parent, +}; + +/* clock derived from pll1 clk */ +/* cpu clock */ +static struct clk cpu_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &follow_parent, +}; + +/* ahb configuration structure */ +static struct bus_clk_config ahb_config = { + .reg = CORE_CLK_CFG, + .mask = PLL_HCLK_RATIO_MASK, + .shift = PLL_HCLK_RATIO_SHIFT, +}; + +/* ahb clock */ +static struct clk ahb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &bus_clk_recalc, + .private_data = &ahb_config, +}; + +/* uart parents */ +static struct pclk_info uart_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* uart parent select structure */ +static struct pclk_sel uart_pclk_sel = { + .pclk_info = uart_pclk_info, + .pclk_count = ARRAY_SIZE(uart_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = UART_CLK_MASK, +}; + +/* uart configurations */ +static struct aux_clk_config uart_config = { + .synth_reg = UART_CLK_SYNT, +}; + +/* uart0 clock */ +static struct clk uart0_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = UART0_CLK_ENB, + .pclk_sel = &uart_pclk_sel, + .pclk_sel_shift = UART_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &uart_config, +}; + +/* uart1 clock */ +static struct clk uart1_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = UART1_CLK_ENB, + .pclk_sel = &uart_pclk_sel, + .pclk_sel_shift = UART_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &uart_config, +}; + +/* firda configurations */ +static struct aux_clk_config firda_config = { + .synth_reg = FIRDA_CLK_SYNT, +}; + +/* firda parents */ +static struct pclk_info firda_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* firda parent select structure */ +static struct pclk_sel firda_pclk_sel = { + .pclk_info = firda_pclk_info, + .pclk_count = ARRAY_SIZE(firda_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = FIRDA_CLK_MASK, +}; + +/* firda clock */ +static struct clk firda_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = FIRDA_CLK_ENB, + .pclk_sel = &firda_pclk_sel, + .pclk_sel_shift = FIRDA_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &firda_config, +}; + +/* clcd configurations */ +static struct aux_clk_config clcd_config = { + .synth_reg = CLCD_CLK_SYNT, +}; + +/* clcd parents */ +static struct pclk_info clcd_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* clcd parent select structure */ +static struct pclk_sel clcd_pclk_sel = { + .pclk_info = clcd_pclk_info, + .pclk_count = ARRAY_SIZE(clcd_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = CLCD_CLK_MASK, +}; + +/* clcd clock */ +static struct clk clcd_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = CLCD_CLK_ENB, + .pclk_sel = &clcd_pclk_sel, + .pclk_sel_shift = CLCD_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &clcd_config, +}; + +/* gpt parents */ +static struct pclk_info gpt_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt_pclk_sel = { + .pclk_info = gpt_pclk_info, + .pclk_count = ARRAY_SIZE(gpt_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + +/* gpt0_1 configurations */ +static struct aux_clk_config gpt0_1_config = { + .synth_reg = PRSC1_CLK_CFG, +}; + +/* gpt0 ARM1 subsystem timer clock */ +static struct clk gpt0_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT0_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt0_1_config, +}; + +/* gpt1 timer clock */ +static struct clk gpt1_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT1_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt0_1_config, +}; + +/* gpt2 configurations */ +static struct aux_clk_config gpt2_config = { + .synth_reg = PRSC2_CLK_CFG, +}; + +/* gpt2 timer clock */ +static struct clk gpt2_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT2_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT2_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt2_config, +}; + +/* gpt3 configurations */ +static struct aux_clk_config gpt3_config = { + .synth_reg = PRSC3_CLK_CFG, +}; + +/* gpt3 timer clock */ +static struct clk gpt3_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT3_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT3_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt3_config, +}; + +/* clock derived from pll3 clk */ +/* usbh0 clock */ +static struct clk usbh0_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBH0_CLK_ENB, + .recalc = &follow_parent, +}; + +/* usbh1 clock */ +static struct clk usbh1_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBH1_CLK_ENB, + .recalc = &follow_parent, +}; + +/* usbd clock */ +static struct clk usbd_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBD_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from ahb clk */ +/* apb configuration structure */ +static struct bus_clk_config apb_config = { + .reg = CORE_CLK_CFG, + .mask = HCLK_PCLK_RATIO_MASK, + .shift = HCLK_PCLK_RATIO_SHIFT, +}; + +/* apb clock */ +static struct clk apb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &bus_clk_recalc, + .private_data = &apb_config, +}; + +/* i2c clock */ +static struct clk i2c_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = I2C_CLK_ENB, + .recalc = &follow_parent, +}; + +/* dma clock */ +static struct clk dma_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = DMA_CLK_ENB, + .recalc = &follow_parent, +}; + +/* jpeg clock */ +static struct clk jpeg_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = JPEG_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gmac clock */ +static struct clk gmac_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GMAC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* smi clock */ +static struct clk smi_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SMI_CLK_ENB, + .recalc = &follow_parent, +}; + +/* fsmc clock */ +static struct clk fsmc_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = FSMC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from apb clk */ +/* adc clock */ +static struct clk adc_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = ADC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp0 clock */ +static struct clk ssp0_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP0_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp1 clock */ +static struct clk ssp1_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP1_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp2 clock */ +static struct clk ssp2_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP2_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gpio0 ARM subsystem clock */ +static struct clk gpio0_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* gpio1 clock */ +static struct clk gpio1_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPIO1_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gpio2 clock */ +static struct clk gpio2_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPIO2_CLK_ENB, + .recalc = &follow_parent, +}; + +/* array of all spear 6xx clock lookups */ +static struct clk_lookup spear_clk_lookups[] = { + /* root clks */ + { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, + { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, + /* clock derived from 32 KHz os clk */ + { .dev_id = "rtc", .clk = &rtc_clk}, + /* clock derived from 30 MHz os clk */ + { .con_id = "pll1_clk", .clk = &pll1_clk}, + { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, + { .dev_id = "wdt", .clk = &wdt_clk}, + /* clock derived from pll1 clk */ + { .con_id = "cpu_clk", .clk = &cpu_clk}, + { .con_id = "ahb_clk", .clk = &ahb_clk}, + { .dev_id = "uart0", .clk = &uart0_clk}, + { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "firda", .clk = &firda_clk}, + { .dev_id = "clcd", .clk = &clcd_clk}, + { .dev_id = "gpt0", .clk = &gpt0_clk}, + { .dev_id = "gpt1", .clk = &gpt1_clk}, + { .dev_id = "gpt2", .clk = &gpt2_clk}, + { .dev_id = "gpt3", .clk = &gpt3_clk}, + /* clock derived from pll3 clk */ + { .dev_id = "usbh0", .clk = &usbh0_clk}, + { .dev_id = "usbh1", .clk = &usbh1_clk}, + { .dev_id = "usbd", .clk = &usbd_clk}, + /* clock derived from ahb clk */ + { .con_id = "apb_clk", .clk = &apb_clk}, + { .dev_id = "i2c", .clk = &i2c_clk}, + { .dev_id = "dma", .clk = &dma_clk}, + { .dev_id = "jpeg", .clk = &jpeg_clk}, + { .dev_id = "gmac", .clk = &gmac_clk}, + { .dev_id = "smi", .clk = &smi_clk}, + { .dev_id = "fsmc", .clk = &fsmc_clk}, + /* clock derived from apb clk */ + { .dev_id = "adc", .clk = &adc_clk}, + { .dev_id = "ssp0", .clk = &ssp0_clk}, + { .dev_id = "ssp1", .clk = &ssp1_clk}, + { .dev_id = "ssp2", .clk = &ssp2_clk}, + { .dev_id = "gpio0", .clk = &gpio0_clk}, + { .dev_id = "gpio1", .clk = &gpio1_clk}, + { .dev_id = "gpio2", .clk = &gpio2_clk}, +}; + +void __init clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + recalc_root_clocks(); +} diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h new file mode 100644 index 00000000000..05676bf440d --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/clkdev.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/clkdev.h + * + * Clock Dev framework definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#include <plat/clkdev.h> + +#endif /* __MACH_CLKDEV_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S new file mode 100644 index 00000000000..0f3ea39edd9 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/debug-macro.S @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-spear6xx/include/mach/debug-macro.S + * + * Debugging macro include header for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S new file mode 100644 index 00000000000..9eaecaeafcf --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-spear6xx/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/spear.h> +#include <asm/hardware/vic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status + mov \irqnr, #0 + teq \irqstat, #0 + bne 1001f + ldr \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status + teq \irqstat, #0 + beq 1002f @ this will set/reset + @ zero register + mov \irqnr, #32 +1001: + /* + * Following code will find bit position of least significang + * bit set in irqstat, using following equation + * least significant bit set in n = (n & ~(n-1)) + */ + sub \tmp, \irqstat, #1 @ tmp = irqstat - 1 + mvn \tmp, \tmp @ tmp = ~tmp + and \irqstat, \irqstat, \tmp @ irqstat &= tmp + /* Now, irqstat is = bit no. of 1st bit set in vic irq status */ + clz \tmp, \irqstat @ tmp = leading zeros + + rsb \tmp, \tmp, #0x1F @ tmp = 32 - tmp - 1 + add \irqnr, \irqnr, \tmp + +1002: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h new file mode 100644 index 00000000000..16205a53875 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -0,0 +1,45 @@ +/* + * arch/arm/mach-spear6xx/include/mach/generic.h + * + * SPEAr6XX machine family specific generic header file + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GENERIC_H +#define __MACH_GENERIC_H + +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> + +/* + * Each GPT has 2 timer channels + * Following GPT channels will be used as clock source and clockevent + */ +#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE +#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 +#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 + +/* Add spear6xx family device structure declarations here */ +extern struct amba_device gpio_device[]; +extern struct amba_device uart_device[]; +extern struct sys_timer spear_sys_timer; + +/* Add spear6xx family function declarations here */ +void __init spear6xx_map_io(void); +void __init spear6xx_init_irq(void); +void __init spear6xx_init(void); +void __init spear600_init(void); +void __init clk_init(void); + +/* Add spear600 machine device structure declarations here */ + +#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h new file mode 100644 index 00000000000..3a789dbb69f --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/gpio.h + * + * GPIO macros for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +#include <plat/gpio.h> + +#endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h new file mode 100644 index 00000000000..7545116deca --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/hardware.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-spear6xx/include/mach/hardware.h + * + * Hardware definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* Vitual to physical translation of statically mapped space */ +#define IO_ADDRESS(x) (x | 0xF0000000) + +#endif /* __MACH_HARDWARE_H */ + diff --git a/arch/arm/mach-spear6xx/include/mach/io.h b/arch/arm/mach-spear6xx/include/mach/io.h new file mode 100644 index 00000000000..fb7c106cea9 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-spear6xx/include/mach/io.h + * + * IO definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#include <plat/io.h> + +#endif /* __MACH_IO_H */ + diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h new file mode 100644 index 00000000000..8f214b03d75 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -0,0 +1,97 @@ +/* + * arch/arm/mach-spear6xx/include/mach/irqs.h + * + * IRQ helper macros for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +/* IRQ definitions */ +/* VIC 1 */ +#define IRQ_INTRCOMM_SW_IRQ 0 +#define IRQ_INTRCOMM_CPU_1 1 +#define IRQ_INTRCOMM_CPU_2 2 +#define IRQ_INTRCOMM_RAS2A11_1 3 +#define IRQ_INTRCOMM_RAS2A11_2 4 +#define IRQ_INTRCOMM_RAS2A12_1 5 +#define IRQ_INTRCOMM_RAS2A12_2 6 +#define IRQ_GEN_RAS_0 7 +#define IRQ_GEN_RAS_1 8 +#define IRQ_GEN_RAS_2 9 +#define IRQ_GEN_RAS_3 10 +#define IRQ_GEN_RAS_4 11 +#define IRQ_GEN_RAS_5 12 +#define IRQ_GEN_RAS_6 13 +#define IRQ_GEN_RAS_7 14 +#define IRQ_GEN_RAS_8 15 +#define IRQ_CPU_GPT1_1 16 +#define IRQ_CPU_GPT1_2 17 +#define IRQ_LOCAL_GPIO 18 +#define IRQ_PLL_UNLOCK 19 +#define IRQ_JPEG 20 +#define IRQ_FSMC 21 +#define IRQ_IRDA 22 +#define IRQ_RESERVED 23 +#define IRQ_UART_0 24 +#define IRQ_UART_1 25 +#define IRQ_SSP_1 26 +#define IRQ_SSP_2 27 +#define IRQ_I2C 28 +#define IRQ_GEN_RAS_9 29 +#define IRQ_GEN_RAS_10 30 +#define IRQ_GEN_RAS_11 31 + +/* VIC 2 */ +#define IRQ_APPL_GPT1_1 32 +#define IRQ_APPL_GPT1_2 33 +#define IRQ_APPL_GPT2_1 34 +#define IRQ_APPL_GPT2_2 35 +#define IRQ_APPL_GPIO 36 +#define IRQ_APPL_SSP 37 +#define IRQ_APPL_ADC 38 +#define IRQ_APPL_RESERVED 39 +#define IRQ_AHB_EXP_MASTER 40 +#define IRQ_DDR_CONTROLLER 41 +#define IRQ_BASIC_DMA 42 +#define IRQ_BASIC_RESERVED1 43 +#define IRQ_BASIC_SMI 44 +#define IRQ_BASIC_CLCD 45 +#define IRQ_EXP_AHB_1 46 +#define IRQ_EXP_AHB_2 47 +#define IRQ_BASIC_GPT1_1 48 +#define IRQ_BASIC_GPT1_2 49 +#define IRQ_BASIC_RTC 50 +#define IRQ_BASIC_GPIO 51 +#define IRQ_BASIC_WDT 52 +#define IRQ_BASIC_RESERVED 53 +#define IRQ_AHB_EXP_SLAVE 54 +#define IRQ_GMAC_1 55 +#define IRQ_GMAC_2 56 +#define IRQ_USB_DEV 57 +#define IRQ_USB_H_OHCI_0 58 +#define IRQ_USB_H_EHCI_0 59 +#define IRQ_USB_H_OHCI_1 60 +#define IRQ_USB_H_EHCI_1 61 +#define IRQ_EXP_AHB_3 62 +#define IRQ_EXP_AHB_4 63 + +#define IRQ_VIC_END 64 + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE IRQ_VIC_END +#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE +#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8) +#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8) +#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END) +#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) + +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h new file mode 100644 index 00000000000..781f088fc22 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/memory.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/memory.h + * + * Memory map for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#include <plat/memory.h> + +#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h new file mode 100644 index 00000000000..03908036b0d --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-spear6xx/include/mach/misc_regs.h + * + * Miscellaneous registers definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MISC_REGS_H +#define __MACH_MISC_REGS_H + +#include <mach/spear.h> + +#define MISC_BASE VA_SPEAR6XX_ICM3_MISC_REG_BASE + +#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000)) +#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004)) +#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008)) +#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C)) +#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010)) +#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014)) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018)) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C)) +#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020)) +#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024)) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028)) +/* PERIP_CLK_CFG register masks */ +#define CLCD_CLK_SHIFT 2 +#define CLCD_CLK_MASK 0x3 +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 10 +#define GPT2_CLK_SHIFT 11 +#define GPT3_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_MASK 0 +#define AUX_CLK_PLL1_MASK 1 + +#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C)) +/* PERIP1_CLK_ENB register masks */ +#define UART0_CLK_ENB 3 +#define UART1_CLK_ENB 4 +#define SSP0_CLK_ENB 5 +#define SSP1_CLK_ENB 6 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FSMC_CLK_ENB 9 +#define FIRDA_CLK_ENB 10 +#define GPT2_CLK_ENB 11 +#define GPT3_CLK_ENB 12 +#define GPIO2_CLK_ENB 13 +#define SSP2_CLK_ENB 14 +#define ADC_CLK_ENB 15 +#define GPT1_CLK_ENB 11 +#define RTC_CLK_ENB 17 +#define GPIO1_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define CLCD_CLK_ENB 22 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH0_CLK_ENB 25 +#define USBH1_CLK_ENB 26 + +#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030)) +#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034)) +#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038)) +/* PERIP1_SOF_RST register masks */ +#define JPEG_SOF_RST 8 + +#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C)) +#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040)) +#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044)) +#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048)) +#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C)) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050)) +#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054)) +#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C)) +#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060)) +#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064)) +#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068)) +#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C)) +#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070)) +#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074)) +#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078)) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF + +#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C)) +#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080)) +#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084)) +#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088)) +#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C)) +#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090)) +#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094)) +#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098)) +#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C)) +#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0)) +#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4)) +#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8)) +#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC)) +#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0)) +#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4)) +#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8)) +#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC)) +#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0)) +#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4)) +#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8)) +#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC)) +#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0)) +#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4)) +#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8)) +#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC)) +#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0)) +#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4)) +#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8)) +#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC)) +#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100)) +#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104)) +#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108)) +#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C)) +#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110)) +#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114)) +#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118)) +#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C)) + +#endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h new file mode 100644 index 00000000000..a835f5b6b18 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/spear.h @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-spear6xx/include/mach/spear.h + * + * SPEAr6xx Machine family specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR6XX_H +#define __MACH_SPEAR6XX_H + +#include <mach/hardware.h> +#include <mach/spear600.h> + +#define SPEAR6XX_ML_SDRAM_BASE 0x00000000 +#define SPEAR6XX_ML_SDRAM_SIZE 0x40000000 + +/* ICM1 - Low speed connection */ +#define SPEAR6XX_ICM1_BASE 0xD0000000 +#define SPEAR6XX_ICM1_SIZE 0x08000000 + +#define SPEAR6XX_ICM1_UART0_BASE 0xD0000000 +#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE) +#define SPEAR6XX_ICM1_UART0_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_UART1_BASE 0xD0080000 +#define SPEAR6XX_ICM1_UART1_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_SSP0_BASE 0xD0100000 +#define SPEAR6XX_ICM1_SSP0_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_SSP1_BASE 0xD0180000 +#define SPEAR6XX_ICM1_SSP1_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_I2C_BASE 0xD0200000 +#define SPEAR6XX_ICM1_I2C_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_JPEG_BASE 0xD0800000 +#define SPEAR6XX_ICM1_JPEG_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_IRDA_BASE 0xD1000000 +#define SPEAR6XX_ICM1_IRDA_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_FSMC_BASE 0xD1800000 +#define SPEAR6XX_ICM1_FSMC_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_NAND_BASE 0xD2000000 +#define SPEAR6XX_ICM1_NAND_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_SRAM_BASE 0xD2800000 +#define SPEAR6XX_ICM1_SRAM_SIZE 0x00800000 + +/* ICM2 - Application Subsystem */ +#define SPEAR6XX_ICM2_BASE 0xD8000000 +#define SPEAR6XX_ICM2_SIZE 0x08000000 + +#define SPEAR6XX_ICM2_TMR0_BASE 0xD8000000 +#define SPEAR6XX_ICM2_TMR0_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_TMR1_BASE 0xD8080000 +#define SPEAR6XX_ICM2_TMR1_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_GPIO_BASE 0xD8100000 +#define SPEAR6XX_ICM2_GPIO_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_SPI2_BASE 0xD8180000 +#define SPEAR6XX_ICM2_SPI2_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_ADC_BASE 0xD8200000 +#define SPEAR6XX_ICM2_ADC_SIZE 0x00080000 + +/* ML-1, 2 - Multi Layer CPU Subsystem */ +#define SPEAR6XX_ML_CPU_BASE 0xF0000000 +#define SPEAR6XX_ML_CPU_SIZE 0x08000000 + +#define SPEAR6XX_CPU_TMR_BASE 0xF0000000 +#define SPEAR6XX_CPU_TMR_SIZE 0x00100000 + +#define SPEAR6XX_CPU_GPIO_BASE 0xF0100000 +#define SPEAR6XX_CPU_GPIO_SIZE 0x00100000 + +#define SPEAR6XX_CPU_VIC_SEC_BASE 0xF1000000 +#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE) +#define SPEAR6XX_CPU_VIC_SEC_SIZE 0x00100000 + +#define SPEAR6XX_CPU_VIC_PRI_BASE 0xF1100000 +#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE) +#define SPEAR6XX_CPU_VIC_PRI_SIZE 0x00100000 + +/* ICM3 - Basic Subsystem */ +#define SPEAR6XX_ICM3_BASE 0xF8000000 +#define SPEAR6XX_ICM3_SIZE 0x08000000 + +#define SPEAR6XX_ICM3_SMEM_BASE 0xF8000000 +#define SPEAR6XX_ICM3_SMEM_SIZE 0x04000000 + +#define SPEAR6XX_ICM3_SMI_CTRL_BASE 0xFC000000 +#define SPEAR6XX_ICM3_SMI_CTRL_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_CLCD_BASE 0xFC200000 +#define SPEAR6XX_ICM3_CLCD_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_DMA_BASE 0xFC400000 +#define SPEAR6XX_ICM3_DMA_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE 0xFC600000 +#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_TMR_BASE 0xFC800000 +#define SPEAR6XX_ICM3_TMR_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_WDT_BASE 0xFC880000 +#define SPEAR6XX_ICM3_WDT_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_RTC_BASE 0xFC900000 +#define SPEAR6XX_ICM3_RTC_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_GPIO_BASE 0xFC980000 +#define SPEAR6XX_ICM3_GPIO_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_SYS_CTRL_BASE 0xFCA00000 +#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE) +#define SPEAR6XX_ICM3_SYS_CTRL_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_MISC_REG_BASE 0xFCA80000 +#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE) +#define SPEAR6XX_ICM3_MISC_REG_SIZE 0x00080000 + +/* ICM4 - High Speed Connection */ +#define SPEAR6XX_ICM4_BASE 0xE0000000 +#define SPEAR6XX_ICM4_SIZE 0x08000000 + +#define SPEAR6XX_ICM4_GMAC_BASE 0xE0800000 +#define SPEAR6XX_ICM4_GMAC_SIZE 0x00800000 + +#define SPEAR6XX_ICM4_USBD_FIFO_BASE 0xE1000000 +#define SPEAR6XX_ICM4_USBD_FIFO_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USBD_CSR_BASE 0xE1100000 +#define SPEAR6XX_ICM4_USBD_CSR_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USBD_PLDT_BASE 0xE1200000 +#define SPEAR6XX_ICM4_USBD_PLDT_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_EHCI0_BASE 0xE1800000 +#define SPEAR6XX_ICM4_USB_EHCI0_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_OHCI0_BASE 0xE1900000 +#define SPEAR6XX_ICM4_USB_OHCI0_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_EHCI1_BASE 0xE2000000 +#define SPEAR6XX_ICM4_USB_EHCI1_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_OHCI1_BASE 0xE2100000 +#define SPEAR6XX_ICM4_USB_OHCI1_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_ARB_BASE 0xE2800000 +#define SPEAR6XX_ICM4_USB_ARB_SIZE 0x00010000 + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE +#define VA_SPEAR_DBG_UART_BASE VA_SPEAR6XX_ICM1_UART0_BASE + +/* Sysctl base for spear platform */ +#define SPEAR_SYS_CTRL_BASE SPEAR6XX_ICM3_SYS_CTRL_BASE +#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR6XX_ICM3_SYS_CTRL_BASE + +#endif /* __MACH_SPEAR6XX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h new file mode 100644 index 00000000000..c068cc50b0f --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/spear600.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-spear66xx/include/mach/spear600.h + * + * SPEAr600 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR600 + +#ifndef __MACH_SPEAR600_H +#define __MACH_SPEAR600_H + +#endif /* __MACH_SPEAR600_H */ + +#endif /* CONFIG_MACH_SPEAR600 */ diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h new file mode 100644 index 00000000000..0b1d2be81cf --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/system.h + * + * SPEAr6xx Machine family specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <plat/system.h> + +#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h new file mode 100644 index 00000000000..ac1c5b00569 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/timex.h + * + * SPEAr6XX machine family specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +#include <plat/timex.h> + +#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h new file mode 100644 index 00000000000..77f0765e21e --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/uncompress.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#include <plat/uncompress.h> + +#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h new file mode 100644 index 00000000000..4a0b56cb2a9 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/vmalloc.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/vmalloc.h + * + * Defining Vmalloc area for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_VMALLOC_H +#define __MACH_VMALLOC_H + +#include <plat/vmalloc.h> + +#endif /* __MACH_VMALLOC_H */ diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c new file mode 100644 index 00000000000..5c484c433dc --- /dev/null +++ b/arch/arm/mach-spear6xx/spear600.c @@ -0,0 +1,25 @@ +/* + * arch/arm/mach-spear6xx/spear600.c + * + * SPEAr600 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear600 specific devices here */ + +void __init spear600_init(void) +{ + /* call spear6xx family common init function */ + spear6xx_init(); +} diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c new file mode 100644 index 00000000000..daff8d04f7b --- /dev/null +++ b/arch/arm/mach-spear6xx/spear600_evb.c @@ -0,0 +1,51 @@ +/* + * arch/arm/mach-spear6xx/spear600_evb.c + * + * SPEAr600 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +static struct amba_device *amba_devs[] __initdata = { + &gpio_device[0], + &gpio_device[1], + &gpio_device[2], + &uart_device[0], + &uart_device[1], +}; + +static struct platform_device *plat_devs[] __initdata = { +}; + +static void __init spear600_evb_init(void) +{ + unsigned int i; + + /* call spear600 machine init function */ + spear600_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") + .boot_params = 0x00000100, + .map_io = spear6xx_map_io, + .init_irq = spear6xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear600_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c new file mode 100644 index 00000000000..b67e571d4bf --- /dev/null +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -0,0 +1,158 @@ +/* + * arch/arm/mach-spear6xx/spear6xx.c + * + * SPEAr6XX machines common source file + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/io.h> +#include <asm/hardware/vic.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <mach/irqs.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear6xx machines common devices here */ +/* uart device registeration */ +struct amba_device uart_device[] = { + { + .dev = { + .init_name = "uart0", + }, + .res = { + .start = SPEAR6XX_ICM1_UART0_BASE, + .end = SPEAR6XX_ICM1_UART0_BASE + + SPEAR6XX_ICM1_UART0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART_0, NO_IRQ}, + }, { + .dev = { + .init_name = "uart1", + }, + .res = { + .start = SPEAR6XX_ICM1_UART1_BASE, + .end = SPEAR6XX_ICM1_UART1_BASE + + SPEAR6XX_ICM1_UART1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART_1, NO_IRQ}, + } +}; + +/* gpio device registeration */ +static struct pl061_platform_data gpio_plat_data[] = { + { + .gpio_base = 0, + .irq_base = SPEAR_GPIO0_INT_BASE, + }, { + .gpio_base = 8, + .irq_base = SPEAR_GPIO1_INT_BASE, + }, { + .gpio_base = 16, + .irq_base = SPEAR_GPIO2_INT_BASE, + }, +}; + +struct amba_device gpio_device[] = { + { + .dev = { + .init_name = "gpio0", + .platform_data = &gpio_plat_data[0], + }, + .res = { + .start = SPEAR6XX_CPU_GPIO_BASE, + .end = SPEAR6XX_CPU_GPIO_BASE + + SPEAR6XX_CPU_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, + }, { + .dev = { + .init_name = "gpio1", + .platform_data = &gpio_plat_data[1], + }, + .res = { + .start = SPEAR6XX_ICM3_GPIO_BASE, + .end = SPEAR6XX_ICM3_GPIO_BASE + + SPEAR6XX_ICM3_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_BASIC_GPIO, NO_IRQ}, + }, { + .dev = { + .init_name = "gpio2", + .platform_data = &gpio_plat_data[2], + }, + .res = { + .start = SPEAR6XX_ICM2_GPIO_BASE, + .end = SPEAR6XX_ICM2_GPIO_BASE + + SPEAR6XX_ICM2_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_APPL_GPIO, NO_IRQ}, + } +}; + +/* This will add devices, and do machine specific tasks */ +void __init spear6xx_init(void) +{ + /* nothing to do for now */ +} + +/* This will initialize vic */ +void __init spear6xx_init_irq(void) +{ + vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0); + vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0); +} + +/* Following will create static virtual/physical mappings */ +static struct map_desc spear6xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR6XX_ICM1_UART0_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE), + .length = SPEAR6XX_ICM1_UART0_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE), + .length = SPEAR6XX_CPU_VIC_PRI_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE), + .length = SPEAR6XX_CPU_VIC_SEC_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE), + .length = SPEAR6XX_ICM3_MISC_REG_BASE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE), + .length = SPEAR6XX_ICM3_MISC_REG_SIZE, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear6xx_map_io(void) +{ + iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); + + /* This will initialize clock framework */ + clk_init(); +} diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 109f5a6e71c..783f1236fe1 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -101,11 +101,12 @@ int __devinit mmc_init(struct amba_device *adev) * we have a regulator we can control instead. */ /* Nominally 2.85V on our platform */ + mmci_card->mmc0_plat_data.f_max = 24000000; mmci_card->mmc0_plat_data.status = mmc_status; mmci_card->mmc0_plat_data.gpio_wp = -1; mmci_card->mmc0_plat_data.gpio_cd = -1; mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA; + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 03625d74485..6625e5bbf4d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,15 +1,42 @@ -menu "ST-Ericsson platform type" - depends on ARCH_U8500 +if ARCH_U8500 -comment "ST-Ericsson Multicore Mobile Platforms" - -config MACH_U8500_MOP - bool "U8500 Early Development platform" +config UX500_SOC_COMMON + bool default y select ARM_GIC select HAS_MTU + select NOMADIK_GPIO + +config UX500_SOC_DB8500 + bool + +config UX500_SOC_DB5500 + bool + +choice + prompt "Ux500 target platform" + default MACH_U8500_MOP + +config MACH_U8500_MOP + bool "U8500 Development platform" + select UX500_SOC_DB8500 help Include support for mop500 development platform based on U8500 architecture. The platform is based on early drop silicon version of 8500. -endmenu + +config MACH_U5500 + bool "U5500 Development platform" + select UX500_SOC_DB5500 + help + Include support for the U5500 development platform. +endchoice + +config UX500_DEBUG_UART + int "Ux500 UART to use for low-level debug" + default 2 + help + Choose the UART on which kernel low-level debug messages should be + output. + +endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 95e6e24c004..c7bc4199e3a 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,7 +2,9 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := clock.o -obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o +obj-y := clock.o cpu.o devices.o +obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 803aec1d672..072196c5726 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -17,37 +17,14 @@ #include <linux/amba/pl022.h> #include <linux/spi/spi.h> -#include <asm/localtimer.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/mtu.h> #include <plat/i2c.h> #include <mach/hardware.h> #include <mach/setup.h> - -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} - -/* These are active devices on this board */ -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(U8500_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(U8500_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; - -static struct amba_device uart2_device = { - .dev = { .init_name = "uart2" }, - __MEM_4K_RESOURCE(U8500_UART2_BASE), - .irq = {IRQ_UART2, NO_IRQ}, -}; +#include <mach/devices.h> static void ab4500_spi_cs_control(u32 command) { @@ -93,55 +70,8 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", - .platform_data = &ssp0_platform_data, - }, - .res = { - .start = U8500_SSP0_BASE, - .end = U8500_SSP0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_SSP0, NO_IRQ }, - /* ST-Ericsson modified id */ - .periphid = SSP_PER_ID, -}; - -static struct amba_device pl031_device = { - .dev = { - .init_name = "pl031", - }, - .res = { - .start = U8500_RTC_BASE, - .end = U8500_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_RTC_RTT, NO_IRQ}, -}; - -#define U8500_I2C_RESOURCES(id, size) \ -static struct resource u8500_i2c_resources_##id[] = { \ - [0] = { \ - .start = U8500_I2C##id##_BASE, \ - .end = U8500_I2C##id##_BASE + size - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = IRQ_I2C##id, \ - .end = IRQ_I2C##id, \ - .flags = IORESOURCE_IRQ \ - } \ -} - -U8500_I2C_RESOURCES(0, SZ_4K); -U8500_I2C_RESOURCES(1, SZ_4K); -U8500_I2C_RESOURCES(2, SZ_4K); -U8500_I2C_RESOURCES(3, SZ_4K); - #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ -static struct nmk_i2c_controller u8500_i2c_##id = { \ +static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ * 250 ns,100ns,10ns which is 14,6,2 \ @@ -169,58 +99,32 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -#define U8500_I2C_PDEVICE(cid) \ -static struct platform_device i2c_controller##cid = { \ - .name = "nmk-i2c", \ - .id = cid, \ - .num_resources = 2, \ - .resource = u8500_i2c_resources_##cid, \ - .dev = { \ - .platform_data = &u8500_i2c_##cid \ - } \ -} - -U8500_I2C_PDEVICE(0); -U8500_I2C_PDEVICE(1); -U8500_I2C_PDEVICE(2); -U8500_I2C_PDEVICE(3); - static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &pl022_device, - &pl031_device, + &ux500_uart0_device, + &ux500_uart1_device, + &ux500_uart2_device, + &u8500_ssp0_device, }; /* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - &i2c_controller0, - &i2c_controller1, - &i2c_controller2, - &i2c_controller3, -}; - -static void __init u8500_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - /* Setup the local timer base */ - twd_base = __io_address(U8500_TWD_BASE); -#endif - /* Setup the MTU base */ - mtu_base = __io_address(U8500_MTU0_BASE); - - nmdk_timer_init(); -} - -static struct sys_timer u8500_timer = { - .init = u8500_timer_init, + &u8500_i2c0_device, + &ux500_i2c1_device, + &ux500_i2c2_device, + &ux500_i2c3_device, }; static void __init u8500_init_machine(void) { int i; + u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; + ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; + ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; + ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data; + + u8500_ssp0_device.dev.platform_data = &ssp0_platform_data; + /* Register the active AMBA devices on this board */ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); @@ -239,8 +143,8 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = u8500_map_io, - .init_irq = u8500_init_irq, + .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &u8500_timer, + .timer = &ux500_timer, .init_machine = u8500_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c new file mode 100644 index 00000000000..4430e69cf53 --- /dev/null +++ b/arch/arm/mach-ux500/board-u5500.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/devices.h> +#include <mach/setup.h> + +static struct amba_device *amba_board_devs[] __initdata = { + &ux500_uart0_device, + &ux500_uart1_device, + &ux500_uart2_device, +}; + +static void __init u5500_init_machine(void) +{ + u5500_init_devices(); + + amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs)); +} + +MACHINE_START(U8500, "ST-Ericsson U5500 Platform") + .phys_io = UX500_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = u5500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .init_machine = u5500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 8359a73d004..1b2c9890e8b 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 ST-Ericsson - * heavily based on realview platform + * Copyright (C) 2009 STMicroelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,33 +12,130 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/mutex.h> +#include <linux/io.h> #include <asm/clkdev.h> -/* currently the clk structure - * just supports rate. This would - * be extended as and when new devices are - * added - TODO - */ -struct clk { - unsigned long rate; -}; +#include <mach/hardware.h> +#include "clock.h" + +#define PRCC_PCKEN 0x00 +#define PRCC_PCKDIS 0x04 +#define PRCC_KCKEN 0x08 +#define PRCC_KCKDIS 0x0C + +#define PRCM_YYCLKEN0_MGT_SET 0x510 +#define PRCM_YYCLKEN1_MGT_SET 0x514 +#define PRCM_YYCLKEN0_MGT_CLR 0x518 +#define PRCM_YYCLKEN1_MGT_CLR 0x51C +#define PRCM_YYCLKEN0_MGT_VAL 0x520 +#define PRCM_YYCLKEN1_MGT_VAL 0x524 + +#define PRCM_SVAMMDSPCLK_MGT 0x008 +#define PRCM_SIAMMDSPCLK_MGT 0x00C +#define PRCM_SGACLK_MGT 0x014 +#define PRCM_UARTCLK_MGT 0x018 +#define PRCM_MSP02CLK_MGT 0x01C +#define PRCM_MSP1CLK_MGT 0x288 +#define PRCM_I2CCLK_MGT 0x020 +#define PRCM_SDMMCCLK_MGT 0x024 +#define PRCM_SLIMCLK_MGT 0x028 +#define PRCM_PER1CLK_MGT 0x02C +#define PRCM_PER2CLK_MGT 0x030 +#define PRCM_PER3CLK_MGT 0x034 +#define PRCM_PER5CLK_MGT 0x038 +#define PRCM_PER6CLK_MGT 0x03C +#define PRCM_PER7CLK_MGT 0x040 +#define PRCM_LCDCLK_MGT 0x044 +#define PRCM_BMLCLK_MGT 0x04C +#define PRCM_HSITXCLK_MGT 0x050 +#define PRCM_HSIRXCLK_MGT 0x054 +#define PRCM_HDMICLK_MGT 0x058 +#define PRCM_APEATCLK_MGT 0x05C +#define PRCM_APETRACECLK_MGT 0x060 +#define PRCM_MCDECLK_MGT 0x064 +#define PRCM_IPI2CCLK_MGT 0x068 +#define PRCM_DSIALTCLK_MGT 0x06C +#define PRCM_DMACLK_MGT 0x074 +#define PRCM_B2R2CLK_MGT 0x078 +#define PRCM_TVCLK_MGT 0x07C +#define PRCM_UNIPROCLK_MGT 0x278 +#define PRCM_SSPCLK_MGT 0x280 +#define PRCM_RNGCLK_MGT 0x284 +#define PRCM_UICCCLK_MGT 0x27C + +#define PRCM_MGT_ENABLE (1 << 8) + +static DEFINE_SPINLOCK(clocks_lock); + +static void __clk_enable(struct clk *clk) +{ + if (clk->enabled++ == 0) { + if (clk->parent_cluster) + __clk_enable(clk->parent_cluster); + + if (clk->parent_periph) + __clk_enable(clk->parent_periph); + + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + } +} int clk_enable(struct clk *clk) { + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } EXPORT_SYMBOL(clk_enable); +static void __clk_disable(struct clk *clk) +{ + if (--clk->enabled == 0) { + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent_periph) + __clk_disable(clk->parent_periph); + + if (clk->parent_cluster) + __clk_disable(clk->parent_cluster); + } +} + void clk_disable(struct clk *clk) { + unsigned long flags; + + WARN_ON(!clk->enabled); + + spin_lock_irqsave(&clocks_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return clk->rate; + unsigned long rate; + + if (clk->ops && clk->ops->get_rate) + return clk->ops->get_rate(clk); + + rate = clk->rate; + if (!rate) { + if (clk->parent_periph) + rate = clk_get_rate(clk->parent_periph); + else if (clk->parent_cluster) + rate = clk_get_rate(clk->parent_cluster); + } + + return rate; } EXPORT_SYMBOL(clk_get_rate); @@ -56,37 +153,373 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); -/* ssp clock */ -static struct clk ssp_clk = { - .rate = 48000000, +static void clk_prcmu_enable(struct clk *clk) +{ + void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_set_reg); +} + +static void clk_prcmu_disable(struct clk *clk) +{ + void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_clr_reg); +} + +/* ED doesn't have the combined set/clr registers */ +static void clk_prcmu_ed_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) | PRCM_MGT_ENABLE, addr); +} + +static void clk_prcmu_ed_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) & ~PRCM_MGT_ENABLE, addr); +} + +static struct clkops clk_prcmu_ops = { + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, }; -/* fixed clock */ -static struct clk f38_clk = { - .rate = 38400000, +static unsigned int clkrst_base[] = { + [1] = U8500_CLKRST1_BASE, + [2] = U8500_CLKRST2_BASE, + [3] = U8500_CLKRST3_BASE, + [5] = U8500_CLKRST5_BASE, + [6] = U8500_CLKRST6_BASE, + [7] = U8500_CLKRST7_BASE_ED, }; -static struct clk_lookup lookups[] = { - { - /* UART0 */ - .dev_id = "uart0", - .clk = &f38_clk, - }, { /* UART1 */ - .dev_id = "uart1", - .clk = &f38_clk, - }, { /* UART2 */ - .dev_id = "uart2", - .clk = &f38_clk, - }, { /* SSP */ - .dev_id = "pl022", - .clk = &ssp_clk, - } +static void clk_prcc_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKEN); +} + +static void clk_prcc_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS); +} + +static struct clkops clk_prcc_ops = { + .enable = clk_prcc_enable, + .disable = clk_prcc_disable, +}; + +static struct clk clk_32khz = { + .rate = 32000, +}; + +/* + * PRCMU level clock gating + */ + +/* Bank 0 */ +static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK); +static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK); +static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK); +static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); +static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); +static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); +static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000); +static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); +static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); +static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); +static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); +static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); +static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); +static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000); +static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); +static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); +static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); +static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK); +static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK); +static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK); +static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK); +static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK); +static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK); +static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */ +static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK); +static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK); +static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK); +static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */ + +/* Bank 1 */ +static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */ +static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ + +/* + * PRCC level clock gating + * Format: per#, clk, PCKEN bit, KCKEN bit, parent + */ + +/* Peripheral Cluster #1 */ +static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); +static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); +static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); +static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); +static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); +static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); + +/* Peripheral Cluster #2 */ + +static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); +static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); + +static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); +static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); +static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); + +/* Peripheral Cluster #3 */ +static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); +static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); +static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); +static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); +static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); + +/* Peripheral Cluster #4 is in the always on domain */ + +/* Peripheral Cluster #5 */ +static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); +static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); + +/* Peripheral Cluster #6 */ + +static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); +static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); +static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); +static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); + +/* Peripheral Cluster #7 */ + +static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); + +static struct clk_lookup u8500_common_clks[] = { + /* Peripheral Cluster #1 */ + CLK(gpio0, "gpio.0", NULL), + CLK(gpio0, "gpio.1", NULL), + CLK(slimbus0, "slimbus0", NULL), + CLK(i2c2, "nmk-i2c.2", NULL), + CLK(sdi0, "sdi0", NULL), + CLK(msp0, "msp0", NULL), + CLK(i2c1, "nmk-i2c.1", NULL), + CLK(uart1, "uart1", NULL), + CLK(uart0, "uart0", NULL), + + /* Peripheral Cluster #3 */ + CLK(gpio2, "gpio.2", NULL), + CLK(gpio2, "gpio.3", NULL), + CLK(gpio2, "gpio.4", NULL), + CLK(gpio2, "gpio.5", NULL), + CLK(sdi5, "sdi5", NULL), + CLK(uart2, "uart2", NULL), + CLK(ske, "ske", NULL), + CLK(sdi2, "sdi2", NULL), + CLK(i2c0, "nmk-i2c.0", NULL), + CLK(fsmc, "fsmc", NULL), + + /* Peripheral Cluster #5 */ + CLK(gpio3, "gpio.8", NULL), + + /* Peripheral Cluster #6 */ + CLK(hash1, "hash1", NULL), + CLK(pka, "pka", NULL), + CLK(hash0, "hash0", NULL), + CLK(cryp0, "cryp0", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(svaclk, "sva", NULL), + CLK(siaclk, "sia", NULL), + CLK(sgaclk, "sga", NULL), + CLK(slimclk, "slim", NULL), + CLK(lcdclk, "lcd", NULL), + CLK(bmlclk, "bml", NULL), + CLK(hsitxclk, "stm-hsi.0", NULL), + CLK(hsirxclk, "stm-hsi.1", NULL), + CLK(hdmiclk, "hdmi", NULL), + CLK(apeatclk, "apeat", NULL), + CLK(apetraceclk, "apetrace", NULL), + CLK(mcdeclk, "mcde", NULL), + CLK(ipi2clk, "ipi2", NULL), + CLK(dmaclk, "dma40", NULL), + CLK(b2r2clk, "b2r2", NULL), + CLK(tvclk, "tv", NULL), +}; + +static struct clk_lookup u8500_ed_clks[] = { + /* Peripheral Cluster #1 */ + CLK(spi3_ed, "spi3", NULL), + CLK(msp1_ed, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_ed, "gpio.6", NULL), + CLK(gpio1_ed, "gpio.7", NULL), + CLK(ssitx_ed, "ssitx", NULL), + CLK(ssirx_ed, "ssirx", NULL), + CLK(spi0_ed, "spi0", NULL), + CLK(sdi3_ed, "sdi3", NULL), + CLK(sdi1_ed, "sdi1", NULL), + CLK(msp2_ed, "msp2", NULL), + CLK(sdi4_ed, "sdi4", NULL), + CLK(pwl_ed, "pwl", NULL), + CLK(spi1_ed, "spi1", NULL), + CLK(spi2_ed, "spi2", NULL), + CLK(i2c3_ed, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_ed, "ssp1", NULL), + CLK(ssp0_ed, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_ed, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(dmc_ed, "dmc", NULL), + CLK(cryp1_ed, "cryp1", NULL), + CLK(rng_ed, "rng", NULL), + + /* Peripheral Cluster #7 */ + CLK(tzpc0_ed, "tzpc0", NULL), + CLK(mtu1_ed, "mtu1", NULL), + CLK(mtu0_ed, "mtu0", NULL), + CLK(wdg_ed, "wdg", NULL), + CLK(cfgreg_ed, "cfgreg", NULL), +}; + +static struct clk_lookup u8500_v1_clks[] = { + /* Peripheral Cluster #1 */ + CLK(i2c4, "nmk-i2c.4", NULL), + CLK(spi3_v1, "spi3", NULL), + CLK(msp1_v1, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_v1, "gpio.6", NULL), + CLK(gpio1_v1, "gpio.7", NULL), + CLK(ssitx_v1, "ssitx", NULL), + CLK(ssirx_v1, "ssirx", NULL), + CLK(spi0_v1, "spi0", NULL), + CLK(sdi3_v1, "sdi3", NULL), + CLK(sdi1_v1, "sdi1", NULL), + CLK(msp2_v1, "msp2", NULL), + CLK(sdi4_v1, "sdi4", NULL), + CLK(pwl_v1, "pwl", NULL), + CLK(spi1_v1, "spi1", NULL), + CLK(spi2_v1, "spi2", NULL), + CLK(i2c3_v1, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_v1, "ssp1", NULL), + CLK(ssp0_v1, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_v1, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(mtu1_v1, "mtu1", NULL), + CLK(mtu0_v1, "mtu0", NULL), + CLK(cfgreg_v1, "cfgreg", NULL), + CLK(hash1, "hash1", NULL), + CLK(unipro_v1, "unipro", NULL), + CLK(rng_v1, "rng", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(uniproclk, "uniproclk", NULL), + CLK(dsialtclk, "dsialt", NULL), + + /* Bank 1 */ + CLK(rngclk, "rng", NULL), + CLK(uiccclk, "uicc", NULL), }; static int __init clk_init(void) { - /* register the clock lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + if (cpu_is_u8500ed()) { + clk_prcmu_ops.enable = clk_prcmu_ed_enable; + clk_prcmu_ops.disable = clk_prcmu_ed_disable; + } else if (cpu_is_u5500()) { + /* Clock tree for U5500 not implemented yet */ + clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; + clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; + } + + clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); + if (cpu_is_u8500ed()) + clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); + else + clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h new file mode 100644 index 00000000000..e4f99b65026 --- /dev/null +++ b/arch/arm/mach-ux500/clock.h @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2010 ST-Ericsson + * Copyright (C) 2009 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct clkops - ux500 clock operations + * @enable: function to enable the clock + * @disable: function to disable the clock + * @get_rate: function to get the current clock rate + * + * This structure contains function pointers to functions that will be used to + * control the clock. All of these functions are optional. If get_rate is + * NULL, the rate in the struct clk will be used. + */ +struct clkops { + void (*enable) (struct clk *); + void (*disable) (struct clk *); + unsigned long (*get_rate) (struct clk *); +}; + +/** + * struct clk - ux500 clock structure + * @ops: pointer to clkops struct used to control this clock + * @name: name, for debugging + * @enabled: refcount. positive if enabled, zero if disabled + * @rate: fixed rate for clocks which don't implement + * ops->getrate + * @prcmu_cg_off: address offset of the combined enable/disable register + * (used on u8500v1) + * @prcmu_cg_bit: bit in the combined enable/disable register (used on + * u8500v1) + * @prcmu_cg_mgt: address of the enable/disable register (used on + * u8500ed) + * @cluster: peripheral cluster number + * @prcc_bus: bit for the bus clock in the peripheral's CLKRST + * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST. + * -1 if no kernel clock exists. + * @parent_cluster: pointer to parent's cluster clk struct + * @parent_periph: pointer to parent's peripheral clk struct + * + * Peripherals are organised into clusters, and each cluster has an associated + * bus clock. Some peripherals also have a parent peripheral clock. + * + * In order to enable a clock for a peripheral, we need to enable: + * (1) the parent cluster (bus) clock at the PRCMU level + * (2) the parent peripheral clock (if any) at the PRCMU level + * (3) the peripheral's bus & kernel clock at the PRCC level + * + * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each + * of the cluster and peripheral clocks, and hooking these as the parents of + * the individual peripheral clocks. + * + * (3) is handled by specifying the bits in the PRCC control registers required + * to enable these clocks and modifying them in the ->enable and + * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK). + * + * This structure describes both the PRCMU-level clocks and PRCC-level clocks. + * The prcmu_* fields are only used for the PRCMU clocks, and the cluster, + * prcc, and parent pointers are only used for the PRCC-level clocks. + */ +struct clk { + const struct clkops *ops; + const char *name; + unsigned int enabled; + + unsigned long rate; + struct list_head list; + + /* These three are only for PRCMU clks */ + + unsigned int prcmu_cg_off; + unsigned int prcmu_cg_bit; + unsigned int prcmu_cg_mgt; + + /* The rest are only for PRCC clks */ + + int cluster; + unsigned int prcc_bus; + unsigned int prcc_kernel; + + struct clk *parent_cluster; + struct clk *parent_periph; +}; + +#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .rate = _rate, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcc_ops, \ + .cluster = _pclust, \ + .prcc_bus = _bus_en, \ + .prcc_kernel = _kernel_en, \ + .parent_cluster = &clk_per##_pclust##clk, \ + .parent_periph = _kernclk \ + } + +#define CLK(_clk, _devname, _conname) \ + { \ + .clk = &clk_##_clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c new file mode 100644 index 00000000000..6a3ac4539f1 --- /dev/null +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/devices.h> +#include <mach/setup.h> + +static struct map_desc u5500_io_desc[] __initdata = { + __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), +}; + +static struct platform_device *u5500_platform_devs[] __initdata = { + &u5500_gpio_devs[0], + &u5500_gpio_devs[1], + &u5500_gpio_devs[2], + &u5500_gpio_devs[3], + &u5500_gpio_devs[4], + &u5500_gpio_devs[5], + &u5500_gpio_devs[6], + &u5500_gpio_devs[7], +}; + +void __init u5500_map_io(void) +{ + ux500_map_io(); + + iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); +} + +void __init u5500_init_devices(void) +{ + ux500_init_devices(); + + platform_add_devices(u5500_platform_devs, + ARRAY_SIZE(u5500_platform_devs)); +} diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 397bc1f9ed9..d04299f3b6b 100644 --- a/arch/arm/mach-ux500/cpu-u8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -13,44 +13,55 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/platform_device.h> +#include <linux/io.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> -/* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - /* yet to be added, add i2c0, gpio.. */ + &u8500_gpio_devs[0], + &u8500_gpio_devs[1], + &u8500_gpio_devs[2], + &u8500_gpio_devs[3], + &u8500_gpio_devs[4], + &u8500_gpio_devs[5], + &u8500_gpio_devs[6], + &u8500_gpio_devs[7], + &u8500_gpio_devs[8], }; -#define __IO_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_DEVICE, \ -} - /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +static struct map_desc u8500ed_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), +}; + +static struct map_desc u8500v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), - __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), }; void __init u8500_map_io(void) { + ux500_map_io(); + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); -} -void __init u8500_init_irq(void) -{ - gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29); - gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + if (cpu_is_u8500ed()) + iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); + else + iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); } /* @@ -58,6 +69,8 @@ void __init u8500_init_irq(void) */ void __init u8500_init_devices(void) { + ux500_init_devices(); + /* Register the platform devices */ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c new file mode 100644 index 00000000000..d81ad023963 --- /dev/null +++ b/arch/arm/mach-ux500/cpu.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> +#include <asm/localtimer.h> + +#include <plat/mtu.h> +#include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> + +#include "clock.h" + +static struct map_desc ux500_io_desc[] __initdata = { + __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K), +}; + +static struct amba_device *ux500_amba_devs[] __initdata = { + &ux500_pl031_device, +}; + +void __init ux500_map_io(void) +{ + iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc)); +} + +void __init ux500_init_devices(void) +{ + amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs)); +} + +void __init ux500_init_irq(void) +{ + gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); + gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); +} + +#ifdef CONFIG_CACHE_L2X0 +static int ux500_l2x0_init(void) +{ + void __iomem *l2x0_base; + + l2x0_base = __io_address(UX500_L2CC_BASE); + + /* 64KB way size, 8 way associativity, force WA */ + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + + return 0; +} +early_initcall(ux500_l2x0_init); +#endif + +static void __init ux500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + twd_base = __io_address(UX500_TWD_BASE); +#endif + /* Setup the MTU base */ + if (cpu_is_u8500ed()) + mtu_base = __io_address(U8500_MTU0_BASE_ED); + else + mtu_base = __io_address(UX500_MTU0_BASE); + + nmdk_timer_init(); +} + +struct sys_timer ux500_timer = { + .init = ux500_timer_init, +}; diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c new file mode 100644 index 00000000000..33e5b56bebb --- /dev/null +++ b/arch/arm/mach-ux500/devices-db5500.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/devices.h> + +static struct nmk_gpio_platform_data u5500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */ + GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */ + GPIO_DATA("GPIO-160-191", 160), + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */ +}; + +static struct resource u5500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), +}; + +struct platform_device u5500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), +}; diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c new file mode 100644 index 00000000000..20334236afc --- /dev/null +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +static struct nmk_gpio_platform_data u8500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), + GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), + GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */ + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */ + GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */ +}; + +static struct resource u8500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), + GPIO_RESOURCE(8), +}; + +struct platform_device u8500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), + GPIO_DEVICE(8), +}; + +struct amba_device u8500_ssp0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "ssp0", + }, + .res = { + .start = U8500_SSP0_BASE, + .end = U8500_SSP0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_SSP0, NO_IRQ }, + /* ST-Ericsson modified id */ + .periphid = SSP_PER_ID, +}; + +static struct resource u8500_i2c0_resources[] = { + [0] = { + .start = U8500_I2C0_BASE, + .end = U8500_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C0, + .end = IRQ_I2C0, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c0_device = { + .name = "nmk-i2c", + .id = 0, + .resource = u8500_i2c0_resources, + .num_resources = ARRAY_SIZE(u8500_i2c0_resources), +}; + +static struct resource u8500_i2c4_resources[] = { + [0] = { + .start = U8500_I2C4_BASE, + .end = U8500_I2C4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C4, + .end = IRQ_I2C4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c4_device = { + .name = "nmk-i2c", + .id = 4, + .resource = u8500_i2c4_resources, + .num_resources = ARRAY_SIZE(u8500_i2c4_resources), +}; diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c new file mode 100644 index 00000000000..8a268893cb7 --- /dev/null +++ b/arch/arm/mach-ux500/devices.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/amba/bus.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +struct amba_device ux500_pl031_device = { + .dev = { + .init_name = "pl031", + }, + .res = { + .start = UX500_RTC_BASE, + .end = UX500_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_RTC_RTT, NO_IRQ}, +}; + +struct amba_device ux500_uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(UX500_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +struct amba_device ux500_uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(UX500_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; + +struct amba_device ux500_uart2_device = { + .dev = { .init_name = "uart2" }, + __MEM_4K_RESOURCE(UX500_UART2_BASE), + .irq = {IRQ_UART2, NO_IRQ}, +}; + +#define UX500_I2C_RESOURCES(id, size) \ +static struct resource ux500_i2c##id##_resources[] = { \ + [0] = { \ + .start = UX500_I2C##id##_BASE, \ + .end = UX500_I2C##id##_BASE + size - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + [1] = { \ + .start = IRQ_I2C##id, \ + .end = IRQ_I2C##id, \ + .flags = IORESOURCE_IRQ \ + } \ +} + +UX500_I2C_RESOURCES(1, SZ_4K); +UX500_I2C_RESOURCES(2, SZ_4K); +UX500_I2C_RESOURCES(3, SZ_4K); + +#define UX500_I2C_PDEVICE(cid) \ +struct platform_device ux500_i2c##cid##_device = { \ + .name = "nmk-i2c", \ + .id = cid, \ + .num_resources = 2, \ + .resource = ux500_i2c##cid##_resources, \ +} + +UX500_I2C_PDEVICE(1); +UX500_I2C_PDEVICE(2); +UX500_I2C_PDEVICE(3); + +void __init amba_add_devices(struct amba_device *devs[], int num) +{ + int i; + + for (i = 0; i < num; i++) { + struct amba_device *d = devs[i]; + amba_device_register(d, &iomem_resource); + } +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h new file mode 100644 index 00000000000..545c80fc802 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB5500_REGS_H +#define __MACH_DB5500_REGS_H + +#define U5500_PER1_BASE 0xA0020000 +#define U5500_PER2_BASE 0xA0010000 +#define U5500_PER3_BASE 0x80140000 +#define U5500_PER4_BASE 0x80150000 +#define U5500_PER5_BASE 0x80100000 +#define U5500_PER6_BASE 0x80120000 + +#define U5500_GIC_DIST_BASE 0xA0411000 +#define U5500_GIC_CPU_BASE 0xA0410100 +#define U5500_DMA_BASE 0x90030000 +#define U5500_MCDE_BASE 0xA0400000 +#define U5500_MODEM_BASE 0xB0000000 +#define U5500_L2CC_BASE 0xA0412000 +#define U5500_SCU_BASE 0xA0410000 +#define U5500_DSI1_BASE 0xA0401000 +#define U5500_DSI2_BASE 0xA0402000 +#define U5500_SIA_BASE 0xA0100000 +#define U5500_SVA_BASE 0x80200000 +#define U5500_HSEM_BASE 0xA0000000 +#define U5500_NAND0_BASE 0x60000000 +#define U5500_NAND1_BASE 0x70000000 +#define U5500_TWD_BASE 0xa0410600 +#define U5500_B2R2_BASE 0xa0200000 + +#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) +#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) +#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) +#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) +#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) +#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) +#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) +#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) + +#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) +#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) +#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) + +#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) +#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) +#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) +#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) + +#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) +#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) +#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) +#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) +#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) +#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) +#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) +#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) +#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) +#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) +#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) + +#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) +#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) +#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) +#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) +#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) +#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) +#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) +#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) +#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) +#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) +#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) +#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) +#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) +#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) +#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) +#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) +#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) + +#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) +#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) +#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) +#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) +#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) +#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) +#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) +#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) +#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) +#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) +#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) + +#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE +#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) +#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE +#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE +#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE +#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE +#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) +#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h new file mode 100644 index 00000000000..9169e1e382a --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB8500_REGS_H +#define __MACH_DB8500_REGS_H + +#define U8500_PER3_BASE 0x80000000 +#define U8500_STM_BASE 0x80100000 +#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_B2R2_BASE 0x80130000 +#define U8500_HSEM_BASE 0x80140000 +#define U8500_PER4_BASE 0x80150000 +#define U8500_ICN_BASE 0x81000000 + +#define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xff4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001F000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER5_BASE 0xa03e0000 +#define U8500_PER7_BASE_ED 0xa03d0000 + +#define U8500_SVA_BASE 0xa0100000 +#define U8500_SIA_BASE 0xa0200000 + +#define U8500_SGA_BASE 0xa0300000 +#define U8500_MCDE_BASE 0xa0350000 +#define U8500_DMA_BASE_ED 0xa0362000 +#define U8500_DMA_BASE 0x801C0000 /* v1 */ + +#define U8500_SBAG_BASE 0xa0390000 + +#define U8500_SCU_BASE 0xa0410000 +#define U8500_GIC_CPU_BASE 0xa0410100 +#define U8500_TWD_BASE 0xa0410600 +#define U8500_GIC_DIST_BASE 0xa0411000 +#define U8500_L2CC_BASE 0xa0412000 + +#define U8500_MODEM_I2C 0xb7e02000 + +#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) +#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) +#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) +#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) + +/* per7 base addressess */ +#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) +#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) +#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) +#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000) +#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000) + +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) + +/* per6 base addressess */ +#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ +#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ +#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ +#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) + +/* per5 base addressess */ +#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) +#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) + +/* per4 base addressess */ +#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) +#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) +#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) +#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) +#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) +#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) +#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) + +/* per3 base addresses */ +#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) +#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) +#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) +#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) +#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) +#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) +#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) + +/* per2 base addressess */ +#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) +#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) +#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) +#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) +#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) +#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) +#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) +#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) +#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) +#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) +#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* per1 base addresses */ +#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) +#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) +#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) +#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) +#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) +#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) +#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) +#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) + +#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 + +#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE +#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) +#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE +#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) +#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) +#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) +#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE +#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) +#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE + +#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 09cbfda8aee..c5203b7ea55 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -10,11 +10,19 @@ */ #include <mach/hardware.h> +#if CONFIG_UX500_DEBUG_UART > 2 +#error Invalid Ux500 debug UART +#endif + +#define __UX500_UART(n) UX500_UART##n##_BASE +#define UX500_UART(n) __UX500_UART(n) +#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) + .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =U8500_UART2_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address + ldreq \rx, =UART_BASE @ no, physical address + ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h new file mode 100644 index 00000000000..0422af00a56 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __ASM_ARCH_DEVICES_H__ +#define __ASM_ARCH_DEVICES_H__ + +struct platform_device; +struct amba_device; + +extern struct platform_device u5500_gpio_devs[]; +extern struct platform_device u8500_gpio_devs[]; + +extern struct amba_device ux500_pl031_device; +extern struct amba_device u8500_ssp0_device; +extern struct amba_device ux500_uart0_device; +extern struct amba_device ux500_uart1_device; +extern struct amba_device ux500_uart2_device; + +extern struct platform_device ux500_i2c1_device; +extern struct platform_device ux500_i2c2_device; +extern struct platform_device ux500_i2c3_device; + +extern struct platform_device u8500_i2c0_device; +extern struct platform_device u8500_i2c4_device; + +#endif diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index eece3301fef..60ea88db828 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -17,7 +17,7 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE) + ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE) .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h new file mode 100644 index 00000000000..d548a622e7d --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -0,0 +1,50 @@ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +/* + * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough + * room for a couple of GPIO expanders. + */ +#define ARCH_NR_GPIOS 350 + +#include <plat/gpio.h> + +#define __GPIO_RESOURCE(soc, block) \ + { \ + .start = soc##_GPIOBANK##block##_BASE, \ + .end = soc##_GPIOBANK##block##_BASE + 127, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define __GPIO_DEVICE(soc, block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &soc##_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &soc##_gpio_data[block], \ + }, \ + } + +#define GPIO_DATA(_name, first) \ + { \ + .name = _name, \ + .first_gpio = first, \ + .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ + } + +#ifdef CONFIG_UX500_SOC_DB8500 +#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block) +#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block) +#elif defined(CONFIG_UX500_SOC_DB5500) +#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block) +#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block) +#endif + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 04ea836969b..8656379a830 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -23,109 +23,106 @@ /* typesafe io address */ #define __io_address(n) __io(IO_ADDRESS(n)) +/* used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) -/* - * Base address definitions for U8500 Onchip IPs. All the - * peripherals are contained in a single 1 Mbyte region, with - * AHB peripherals at the bottom and APB peripherals at the - * top of the region. PER stands for PERIPHERAL region which - * itself divided into sub regions. - */ -#define U8500_PER3_BASE 0x80000000 -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_PER4_BASE 0x80150000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER5_BASE 0xa03e0000 -#define U8500_PER7_BASE 0xa03d0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE 0xa0362000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_TWD_SIZE 0x100 - -/* per7 base addressess */ -#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) -#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) -#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) -#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) - -/* per6 base addressess */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addressess */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addressess */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000) - -/* per3 base addressess */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addressess */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) +#include <mach/db8500-regs.h> +#include <mach/db5500-regs.h> + +#ifdef CONFIG_UX500_SOC_DB8500 +#define UX500(periph) U8500_##periph##_BASE +#elif defined(CONFIG_UX500_SOC_DB5500) +#define UX500(periph) U5500_##periph##_BASE +#endif + +#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) +#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) +#define UX500_B2R2_BASE UX500(B2R2) + +#define UX500_CLKRST1_BASE UX500(CLKRST1) +#define UX500_CLKRST2_BASE UX500(CLKRST2) +#define UX500_CLKRST3_BASE UX500(CLKRST3) +#define UX500_CLKRST5_BASE UX500(CLKRST5) +#define UX500_CLKRST6_BASE UX500(CLKRST6) + +#define UX500_DMA_BASE UX500(DMA) +#define UX500_FSMC_BASE UX500(FSMC) + +#define UX500_GIC_CPU_BASE UX500(GIC_CPU) +#define UX500_GIC_DIST_BASE UX500(GIC_DIST) + +#define UX500_I2C1_BASE UX500(I2C1) +#define UX500_I2C2_BASE UX500(I2C2) +#define UX500_I2C3_BASE UX500(I2C3) + +#define UX500_L2CC_BASE UX500(L2CC) +#define UX500_MCDE_BASE UX500(MCDE) +#define UX500_MTU0_BASE UX500(MTU0) +#define UX500_MTU1_BASE UX500(MTU1) +#define UX500_PRCMU_BASE UX500(PRCMU) + +#define UX500_RNG_BASE UX500(RNG) +#define UX500_RTC_BASE UX500(RTC) + +#define UX500_SCU_BASE UX500(SCU) + +#define UX500_SDI0_BASE UX500(SDI0) +#define UX500_SDI1_BASE UX500(SDI1) +#define UX500_SDI2_BASE UX500(SDI2) +#define UX500_SDI3_BASE UX500(SDI3) +#define UX500_SDI4_BASE UX500(SDI4) + +#define UX500_SPI0_BASE UX500(SPI0) +#define UX500_SPI1_BASE UX500(SPI1) +#define UX500_SPI2_BASE UX500(SPI2) +#define UX500_SPI3_BASE UX500(SPI3) + +#define UX500_SIA_BASE UX500(SIA) +#define UX500_SVA_BASE UX500(SVA) + +#define UX500_TWD_BASE UX500(TWD) + +#define UX500_UART0_BASE UX500(UART0) +#define UX500_UART1_BASE UX500(UART1) +#define UX500_UART2_BASE UX500(UART2) + +#define UX500_USBOTG_BASE UX500(USBOTG) /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 +#ifndef __ASSEMBLY__ + +#include <asm/cputype.h> + +static inline bool cpu_is_u8500(void) +{ +#ifdef CONFIG_UX500_SOC_DB8500 + return 1; +#else + return 0; +#endif +} + +static inline bool cpu_is_u8500ed(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; +} + +static inline bool cpu_is_u8500v1(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; +} + +static inline bool cpu_is_u5500(void) +{ +#ifdef CONFIG_UX500_SOC_DB5500 + return 1; +#else + return 0; +#endif +} + +#endif + #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 394b5dd2200..7970684b1d0 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -42,6 +42,7 @@ #define IRQ_AB4500 (IRQ_SHPI_START + 40) #define IRQ_DISP (IRQ_SHPI_START + 48) #define IRQ_SiPI3 (IRQ_SHPI_START + 49) +#define IRQ_I2C4 (IRQ_SHPI_START + 51) #define IRQ_SSP1 (IRQ_SHPI_START + 52) #define IRQ_I2C2 (IRQ_SHPI_START + 55) #define IRQ_SDMMC0 (IRQ_SHPI_START + 60) @@ -66,6 +67,12 @@ /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. */ -#define NR_IRQS 161 +#define U8500_SOC_NR_IRQS 161 + +/* After chip-specific IRQ numbers we have the GPIO ones */ +#define NOMADIK_NR_GPIO 288 +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) +#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) #endif /*ASM_ARCH_IRQS_H*/ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index cf0ce1687f2..e978dbd9e21 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -14,10 +14,28 @@ #include <asm/mach/time.h> #include <linux/init.h> -extern void u8500_map_io(void); -extern void u8500_init_devices(void); -extern void u8500_init_irq(void); +extern void __init ux500_map_io(void); +extern void __init u5500_map_io(void); +extern void __init u8500_map_io(void); + +extern void __init ux500_init_devices(void); +extern void __init u5500_init_devices(void); +extern void __init u8500_init_devices(void); + +extern void __init ux500_init_irq(void); /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); +extern void __init amba_add_devices(struct amba_device *devs[], int num); + +struct sys_timer; +extern struct sys_timer ux500_timer; + +#define __IO_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_DEVICE, \ +} + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 8dfe7ca245d..438ef16aec9 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -30,7 +30,7 @@ volatile int __cpuinitdata pen_release = -1; static unsigned int __init get_core_count(void) { - return scu_get_core_count(__io_address(U8500_SCU_BASE)); + return scu_get_core_count(__io_address(UX500_SCU_BASE)); } static DEFINE_SPINLOCK(boot_lock); @@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); /* * let the primary processor know we're out of the @@ -75,7 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * that it has been released by resetting pen_release. */ pen_release = cpu; - flush_cache_all(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -105,12 +106,12 @@ static void __init wakeup_secondary(void) */ #define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 __raw_writel(virt_to_phys(u8500_secondary_startup), - (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + __io_address(UX500_BACKUPRAM0_BASE) + U8500_CPU1_JUMPADDR_OFFSET); #define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 __raw_writel(0xA1FEED01, - (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + __io_address(UX500_BACKUPRAM0_BASE) + U8500_CPU1_WAKEMAGIC_OFFSET); /* make sure write buffer is drained */ @@ -171,7 +172,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * boot CPU, but only if we have more than one CPU. */ percpu_timer_setup(); - scu_enable(__io_address(U8500_SCU_BASE)); + scu_enable(__io_address(UX500_SCU_BASE)); wakeup_secondary(); } } diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index ba81e70ed81..97cf4d831b0 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c deleted file mode 100644 index c50a44ea7ee..00000000000 --- a/arch/arm/mach-versatile/clock.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/clkdev.h> -#include <asm/hardware/icst307.h> - -#include "clock.h" - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - struct icst307_vco vco; - vco = icst307_khz_to_vco(clk->params, rate / 1000); - return icst307_khz(clk->params, vco) * 1000; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - - if (clk->setvco) { - struct icst307_vco vco; - - vco = icst307_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst307_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } - return ret; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h deleted file mode 100644 index 03468fdc3e5..00000000000 --- a/arch/arm/mach-versatile/clock.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/clock.h - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct module; -struct icst307_params; - -struct clk { - unsigned long rate; - const struct icst307_params *params; - u32 oscoff; - void *data; - void (*setvco)(struct clk *, struct icst307_vco vco); -}; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9ddb49b1cb7..60baba65635 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,18 +28,14 @@ #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/cnt32_to_63.h> #include <linux/io.h> #include <asm/clkdev.h> #include <asm/system.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/leds.h> #include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst307.h> +#include <asm/hardware/icst.h> #include <asm/hardware/vic.h> #include <asm/mach-types.h> @@ -48,9 +44,12 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/clkdev.h> +#include <mach/hardware.h> +#include <mach/platform.h> +#include <plat/timer-sp.h> #include "core.h" -#include "clock.h" /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -58,7 +57,6 @@ * * Setup a VA for the Versatile Vectored Interrupt Controller. */ -#define __io_address(n) __io(IO_ADDRESS(n)) #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) @@ -228,27 +226,6 @@ void __init versatile_map_io(void) iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); } -#define VERSATILE_REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) - -/* - * This is the Versatile sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 35583 days. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 89 seconds between successive - * calls to this function. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER)); - - /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ - v *= 125<<1; - do_div(v, 3<<1); - - return v; -} - #define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) @@ -379,33 +356,40 @@ static struct mmci_platform_data mmc0_plat_data = { /* * Clock handling */ -static const struct icst307_params versatile_oscvco_params = { - .ref = 24000, - .vco_max = 200000, +static const struct icst_params versatile_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, }; -static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco) +static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco) { - void __iomem *sys = __io_address(VERSATILE_SYS_BASE); - void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET; + void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; u32 val; - val = readl(sys + clk->oscoff) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); - writel(val, sys + clk->oscoff); + writel(val, clk->vcoreg); writel(0, sys_lock); } +static const struct clk_ops osc4_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = versatile_oscvco_set, +}; + static struct clk osc4_clk = { + .ops = &osc4_clk_ops, .params = &versatile_oscvco_params, - .oscoff = VERSATILE_SYS_OSCCLCD_OFFSET, - .setvco = versatile_oscvco_set, }; /* @@ -851,6 +835,8 @@ void __init versatile_init(void) { int i; + osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); platform_device_register(&versatile_flash_device); @@ -874,120 +860,6 @@ void __init versatile_init(void) #define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20) #define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE) #define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20) -#define VA_IC_BASE __io_address(VERSATILE_VIC_BASE) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); - - writel(evt, TIMER0_VA_BASE + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, -}; - -/* - * IRQ handler for the timer - */ -static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - writel(1, TIMER0_VA_BASE + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction versatile_timer_irq = { - .name = "Versatile Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = versatile_timer_interrupt, -}; - -static cycle_t versatile_get_cycles(struct clocksource *cs) -{ - return ~readl(TIMER3_VA_BASE + TIMER_VALUE); -} - -static struct clocksource clocksource_versatile = { - .name = "timer3", - .rating = 200, - .read = versatile_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init versatile_clocksource_init(void) -{ - /* setup timer3 as free-running clocksource */ - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER3_VA_BASE + TIMER_CTRL); - - clocksource_versatile.mult = - clocksource_khz2mult(1000, clocksource_versatile.shift); - clocksource_register(&clocksource_versatile); - - return 0; -} /* * Set up timer interrupt, and return the current time in seconds. @@ -1016,22 +888,8 @@ static void __init versatile_timer_init(void) writel(0, TIMER2_VA_BASE + TIMER_CTRL); writel(0, TIMER3_VA_BASE + TIMER_CTRL); - /* - * Make irqs happen for the system timer - */ - setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq); - - versatile_clocksource_init(); - - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - timer0_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&timer0_clockevent); + sp804_clocksource_init(TIMER3_VA_BASE); + sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1); } struct sys_timer versatile_timer = { diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h index 04b37a89801..e58d0771b64 100644 --- a/arch/arm/mach-versatile/include/mach/clkdev.h +++ b/arch/arm/mach-versatile/include/mach/clkdev.h @@ -1,6 +1,15 @@ #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + #define __clk_get(clk) ({ 1; }) #define __clk_put(clk) do { } while (0) diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S index 8c802098058..e6f7c166316 100644 --- a/arch/arm/mach-versatile/include/mach/entry-macro.S +++ b/arch/arm/mach-versatile/include/mach/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/hardware/vic.h> .macro disable_fiq diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 7aa906c9315..4f8f99aac93 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/platform.h> /* * PCI space virtual addresses @@ -49,4 +48,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define __io_address(n) __io(IO_ADDRESS(n)) + #endif diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h index 83207395191..ec087407b16 100644 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ b/arch/arm/mach-versatile/include/mach/platform.h @@ -205,7 +205,7 @@ #define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ #define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */ #define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */ -#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ +#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ /* 0x10000000 - 0x100FFFFF */ #define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */ #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ @@ -213,7 +213,7 @@ #define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */ #define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */ #define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */ -#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ +#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ #define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */ #define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */ #define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */ @@ -379,12 +379,6 @@ #define SIC_INT_PCI3 30 -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE VERSATILE_BOOT_ROM_HI - /* * System controller bit assignment */ @@ -397,20 +391,6 @@ #define VERSATILE_TIMER4_EnSel 21 -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - #define VERSATILE_CSR_BASE 0x10000000 #define VERSATILE_CSR_SIZE 0x10000000 @@ -432,5 +412,3 @@ #endif #endif - -/* END */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig new file mode 100644 index 00000000000..3f19b660a16 --- /dev/null +++ b/arch/arm/mach-vexpress/Kconfig @@ -0,0 +1,9 @@ +menu "Versatile Express platform type" + depends on ARCH_VEXPRESS + +config ARCH_VEXPRESS_CA9X4 + bool "Versatile Express Cortex-A9x4 tile" + select CPU_V7 + select ARM_GIC + +endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile new file mode 100644 index 00000000000..1b71b77ade2 --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := v2m.o +obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot new file mode 100644 index 00000000000..07c2d9c457e --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x60008000 +params_phys-y := 0x60000100 +initrd_phys-y := 0x60800000 diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h new file mode 100644 index 00000000000..57dd95ce41f --- /dev/null +++ b/arch/arm/mach-vexpress/core.h @@ -0,0 +1,26 @@ +#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) +#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) + +#define AMBA_DEVICE(name,busid,base,plat) \ +struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0UL, \ + .init_name = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = base, \ + .end = base + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0UL, \ + .irq = IRQ_##base, \ + /* .dma = DMA_##base,*/ \ +} + +struct map_desc; + +void v2m_map_io(struct map_desc *tile, size_t num); +extern struct sys_timer v2m_timer; + +extern void __iomem *gic_cpu_base_addr; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c new file mode 100644 index 00000000000..e6f73030d5f --- /dev/null +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -0,0 +1,249 @@ +/* + * Versatile Express Core Tile Cortex A9x4 Support + */ +#include <linux/init.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> + +#include <asm/clkdev.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach-types.h> +#include <asm/pmu.h> + +#include <mach/clkdev.h> +#include <mach/ct-ca9x4.h> + +#include <plat/timer-sp.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include "core.h" + +#include <mach/motherboard.h> + +#define V2M_PA_CS7 0x10000000 + +static struct map_desc ct_ca9x4_io_desc[] __initdata = { + { + .virtual = __MMIO_P2V(CT_CA9X4_MPIC), + .pfn = __phys_to_pfn(CT_CA9X4_MPIC), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER), + .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = __MMIO_P2V(CT_CA9X4_L2CC), + .pfn = __phys_to_pfn(CT_CA9X4_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init ct_ca9x4_map_io(void) +{ + v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); +} + +void __iomem *gic_cpu_base_addr; + +static void __init ct_ca9x4_init_irq(void) +{ + gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU); + gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29); + gic_cpu_init(0, gic_cpu_base_addr); +} + +#if 0 +static void ct_ca9x4_timer_init(void) +{ + writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); + writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); + + sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1)); + sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0); +} + +static struct sys_timer ct_ca9x4_timer = { + .init = ct_ca9x4_timer_init, +}; +#endif + +static struct clcd_panel xvga_panel = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15384, + .left_margin = 168, + .right_margin = 8, + .upper_margin = 29, + .lower_margin = 3, + .hsync_len = 144, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) +{ + v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); + v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2); +} + +static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) +{ + unsigned long framesize = 1024 * 768 * 2; + dma_addr_t dma; + + fb->panel = &xvga_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map frame buffer\n"); + return -ENOMEM; + } + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); +} + +static void ct_ca9x4_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board ct_ca9x4_clcd_data = { + .name = "CT-CA9X4", + .check = clcdfb_check, + .decode = clcdfb_decode, + .enable = ct_ca9x4_clcd_enable, + .setup = ct_ca9x4_clcd_setup, + .mmap = ct_ca9x4_clcd_mmap, + .remove = ct_ca9x4_clcd_remove, +}; + +static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); +static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); +static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); + +static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { + &clcd_device, + &dmc_device, + &smc_device, + &gpio_device, +}; + + +static long ct_round(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int ct_set(struct clk *clk, unsigned long rate) +{ + return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate); +} + +static const struct clk_ops osc1_clk_ops = { + .round = ct_round, + .set = ct_set, +}; + +static struct clk osc1_clk = { + .ops = &osc1_clk_ops, + .rate = 24000000, +}; + +static struct clk_lookup lookups[] = { + { /* CLCD */ + .dev_id = "ct:clcd", + .clk = &osc1_clk, + }, +}; + +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_CT_CA9X4_PMU_CPU0, + .end = IRQ_CT_CA9X4_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_CT_CA9X4_PMU_CPU1, + .end = IRQ_CT_CA9X4_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_CT_CA9X4_PMU_CPU2, + .end = IRQ_CT_CA9X4_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_CT_CA9X4_PMU_CPU3, + .end = IRQ_CT_CA9X4_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + +static void ct_ca9x4_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff); +#endif + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) + amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); + + platform_device_register(&pmu_device); +} + +MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") + .phys_io = V2M_UART0, + .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = ct_ca9x4_map_io, + .init_irq = ct_ca9x4_init_irq, +#if 0 + .timer = &ct_ca9x4_timer, +#else + .timer = &v2m_timer, +#endif + .init_machine = ct_ca9x4_init, +MACHINE_END diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S new file mode 100644 index 00000000000..8a78ff68e1e --- /dev/null +++ b/arch/arm/mach-vexpress/headsmp.S @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-vexpress/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Versatile Express specific entry point for secondary CPUs. This + * provides a "holding pen" into which all secondary cores are held + * until we're ready for them to initialise. + */ +ENTRY(vexpress_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h new file mode 100644 index 00000000000..3f8307d73ca --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/clkdev.h @@ -0,0 +1,15 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#include <plat/clock.h> + +struct clk { + const struct clk_ops *ops; + unsigned long rate; + const struct icst_params *params; +}; + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h new file mode 100644 index 00000000000..8650f04136e --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -0,0 +1,47 @@ +#ifndef __MACH_CT_CA9X4_H +#define __MACH_CT_CA9X4_H + +/* + * Physical base addresses + */ +#define CT_CA9X4_CLCDC (0x10020000) +#define CT_CA9X4_AXIRAM (0x10060000) +#define CT_CA9X4_DMC (0x100e0000) +#define CT_CA9X4_SMC (0x100e1000) +#define CT_CA9X4_SCC (0x100e2000) +#define CT_CA9X4_SP804_TIMER (0x100e4000) +#define CT_CA9X4_SP805_WDT (0x100e5000) +#define CT_CA9X4_TZPC (0x100e6000) +#define CT_CA9X4_GPIO (0x100e8000) +#define CT_CA9X4_FASTAXI (0x100e9000) +#define CT_CA9X4_SLOWAXI (0x100ea000) +#define CT_CA9X4_TZASC (0x100ec000) +#define CT_CA9X4_CORESIGHT (0x10200000) +#define CT_CA9X4_MPIC (0x1e000000) +#define CT_CA9X4_SYSTIMER (0x1e004000) +#define CT_CA9X4_SYSWDT (0x1e007000) +#define CT_CA9X4_L2CC (0x1e00a000) + +#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000) +#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020) + +#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) +#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) +#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) +#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000) + +/* + * Interrupts. Those in {} are for AMBA devices + */ +#define IRQ_CT_CA9X4_CLCDC { 76 } +#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_SMC { 77, 78 } +#define IRQ_CT_CA9X4_TIMER0 80 +#define IRQ_CT_CA9X4_TIMER1 81 +#define IRQ_CT_CA9X4_GPIO { 82 } +#define IRQ_CT_CA9X4_PMU_CPU0 92 +#define IRQ_CT_CA9X4_PMU_CPU1 93 +#define IRQ_CT_CA9X4_PMU_CPU2 94 +#define IRQ_CT_CA9X4_PMU_CPU3 95 + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S new file mode 100644 index 00000000000..5167e2aceeb --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -0,0 +1,23 @@ +/* arch/arm/mach-realview/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define DEBUG_LL_UART_OFFSET 0x00009000 + + .macro addruart,rx,tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf8000000 @ virtual base + orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S new file mode 100644 index 00000000000..20e9fb514f0 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S @@ -0,0 +1,67 @@ +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm + diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/hardware.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h new file mode 100644 index 00000000000..748bb524ee7 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/io.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-vexpress/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h new file mode 100644 index 00000000000..7054cbfc9de --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/irqs.h @@ -0,0 +1,4 @@ +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +#define NR_IRQS 128 diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h new file mode 100644 index 00000000000..be28232ae63 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/memory.h @@ -0,0 +1,25 @@ +/* + * arch/arm/mach-vexpress/include/mach/memory.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x60000000) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h new file mode 100644 index 00000000000..98a8ded055b --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -0,0 +1,121 @@ +#ifndef __MACH_MOTHERBOARD_H +#define __MACH_MOTHERBOARD_H + +/* + * Physical addresses, offset from V2M_PA_CS0-3 + */ +#define V2M_NOR0 (V2M_PA_CS0) +#define V2M_NOR1 (V2M_PA_CS1) +#define V2M_SRAM (V2M_PA_CS2) +#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000) +#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000) +#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000) + +/* + * Physical addresses, offset from V2M_PA_CS7 + */ +#define V2M_SYSREGS (V2M_PA_CS7 + 0x00000000) +#define V2M_SYSCTL (V2M_PA_CS7 + 0x00001000) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + 0x00002000) + +#define V2M_AACI (V2M_PA_CS7 + 0x00004000) +#define V2M_MMCI (V2M_PA_CS7 + 0x00005000) +#define V2M_KMI0 (V2M_PA_CS7 + 0x00006000) +#define V2M_KMI1 (V2M_PA_CS7 + 0x00007000) + +#define V2M_UART0 (V2M_PA_CS7 + 0x00009000) +#define V2M_UART1 (V2M_PA_CS7 + 0x0000a000) +#define V2M_UART2 (V2M_PA_CS7 + 0x0000b000) +#define V2M_UART3 (V2M_PA_CS7 + 0x0000c000) + +#define V2M_WDT (V2M_PA_CS7 + 0x0000f000) + +#define V2M_TIMER01 (V2M_PA_CS7 + 0x00011000) +#define V2M_TIMER23 (V2M_PA_CS7 + 0x00012000) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + 0x00016000) +#define V2M_RTC (V2M_PA_CS7 + 0x00017000) + +#define V2M_CF (V2M_PA_CS7 + 0x0001a000) +#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) + +#define V2M_SYS_ID (V2M_SYSREGS + 0x000) +#define V2M_SYS_SW (V2M_SYSREGS + 0x004) +#define V2M_SYS_LED (V2M_SYSREGS + 0x008) +#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024) +#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030) +#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030) +#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034) +#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038) +#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038) +#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c) +#define V2M_SYS_MCI (V2M_SYSREGS + 0x048) +#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c) +#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058) +#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c) +#define V2M_SYS_MISC (V2M_SYSREGS + 0x060) +#define V2M_SYS_DMA (V2M_SYSREGS + 0x064) +#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084) +#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088) +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +#define V2M_TIMER0 (V2M_TIMER01 + 0x000) +#define V2M_TIMER1 (V2M_TIMER01 + 0x020) + +#define V2M_TIMER2 (V2M_TIMER23 + 0x000) +#define V2M_TIMER3 (V2M_TIMER23 + 0x020) + + +/* + * Interrupts. Those in {} are for AMBA devices + */ +#define IRQ_V2M_WDT { (32 + 0) } +#define IRQ_V2M_TIMER0 (32 + 2) +#define IRQ_V2M_TIMER1 (32 + 2) +#define IRQ_V2M_TIMER2 (32 + 3) +#define IRQ_V2M_TIMER3 (32 + 3) +#define IRQ_V2M_RTC { (32 + 4) } +#define IRQ_V2M_UART0 { (32 + 5) } +#define IRQ_V2M_UART1 { (32 + 6) } +#define IRQ_V2M_UART2 { (32 + 7) } +#define IRQ_V2M_UART3 { (32 + 8) } +#define IRQ_V2M_MMCI { (32 + 9), (32 + 10) } +#define IRQ_V2M_AACI { (32 + 11) } +#define IRQ_V2M_KMI0 { (32 + 12) } +#define IRQ_V2M_KMI1 { (32 + 13) } +#define IRQ_V2M_CLCD { (32 + 14) } +#define IRQ_V2M_LAN9118 (32 + 15) +#define IRQ_V2M_ISP1761 (32 + 16) +#define IRQ_V2M_PCIE (32 + 17) + + +/* + * Configuration + */ +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_WRITE (1 << 30) +#define SYS_CFG_OSC (1 << 20) +#define SYS_CFG_VOLT (2 << 20) +#define SYS_CFG_AMP (3 << 20) +#define SYS_CFG_TEMP (4 << 20) +#define SYS_CFG_RESET (5 << 20) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_MUXFPGA (7 << 20) +#define SYS_CFG_SHUTDOWN (8 << 20) +#define SYS_CFG_REBOOT (9 << 20) +#define SYS_CFG_DVIMODE (11 << 20) +#define SYS_CFG_POWER (12 << 20) +#define SYS_CFG_SITE_MB (0 << 16) +#define SYS_CFG_SITE_DB1 (1 << 16) +#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_STACK(n) ((n) << 12) + +#define SYS_CFG_ERR (1 << 1) +#define SYS_CFG_COMPLETE (1 << 0) + +int v2m_cfg_write(u32 devfn, u32 data); +int v2m_cfg_read(u32 devfn, u32 *data); + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h new file mode 100644 index 00000000000..72a9621ed08 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/smp.h @@ -0,0 +1,21 @@ +#ifndef __MACH_SMP_H +#define __MACH_SMP_H + +#include <asm/hardware/gic.h> + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} +#endif diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h new file mode 100644 index 00000000000..899a4e628a4 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-vexpress/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ +} + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h new file mode 100644 index 00000000000..00029bacd43 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/timex.h @@ -0,0 +1,23 @@ +/* + * arch/arm/mach-vexpress/include/mach/timex.h + * + * RealView architecture timex specifications + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h new file mode 100644 index 00000000000..7972c5748d0 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -0,0 +1,52 @@ +/* + * arch/arm/mach-vexpress/include/mach/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +#define get_uart_base() (0x10000000 + 0x00009000) + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h new file mode 100644 index 00000000000..f43a36ef678 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/vmalloc.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-vexpress/include/mach/vmalloc.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c new file mode 100644 index 00000000000..c0e3a59a0bf --- /dev/null +++ b/arch/arm/mach-vexpress/localtimer.c @@ -0,0 +1,26 @@ +/* + * linux/arch/arm/mach-vexpress/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> + +#include <asm/smp_twd.h> +#include <asm/localtimer.h> +#include <mach/irqs.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c new file mode 100644 index 00000000000..670970699ba --- /dev/null +++ b/arch/arm/mach-vexpress/platsmp.c @@ -0,0 +1,190 @@ +/* + * linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <asm/unified.h> + +#include <mach/ct-ca9x4.h> +#include <mach/motherboard.h> +#define V2M_PA_CS7 0x10000000 + +#include "core.h" + +extern void vexpress_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static void __iomem *scu_base_addr(void) +{ + return MMIO_P2V(A9_MPCORE_SCU); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(0, gic_cpu_base_addr); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + pen_release = cpu; + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "vexpress: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "vexpress: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = num_possible_cpus(); + unsigned int cpu = smp_processor_id(); + int i; + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + /* + * Initialise the SCU if there are more than one CPU and let + * them know where to start. + */ + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); + writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + MMIO_P2V(V2M_SYS_FLAGSSET)); + } +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c new file mode 100644 index 00000000000..d250711b8c7 --- /dev/null +++ b/arch/arm/mach-vexpress/v2m.c @@ -0,0 +1,361 @@ +/* + * Versatile Express V2M Motherboard Support + */ +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/amba/mmci.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/spinlock.h> +#include <linux/sysdev.h> +#include <linux/usb/isp1760.h> + +#include <asm/clkdev.h> +#include <asm/sizes.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/hardware/arm_timer.h> + +#include <mach/clkdev.h> +#include <mach/motherboard.h> + +#include <plat/timer-sp.h> + +#include "core.h" + +#define V2M_PA_CS0 0x40000000 +#define V2M_PA_CS1 0x44000000 +#define V2M_PA_CS2 0x48000000 +#define V2M_PA_CS3 0x4c000000 +#define V2M_PA_CS7 0x10000000 + +static struct map_desc v2m_io_desc[] __initdata = { + { + .virtual = __MMIO_P2V(V2M_PA_CS7), + .pfn = __phys_to_pfn(V2M_PA_CS7), + .length = SZ_128K, + .type = MT_DEVICE, + }, +}; + +void __init v2m_map_io(struct map_desc *tile, size_t num) +{ + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + iotable_init(tile, num); +} + + +static void v2m_timer_init(void) +{ + writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); + writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); + + sp804_clocksource_init(MMIO_P2V(V2M_TIMER1)); + sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0); +} + +struct sys_timer v2m_timer = { + .init = v2m_timer_init, +}; + + +static DEFINE_SPINLOCK(v2m_cfg_lock); + +int v2m_cfg_write(u32 devfn, u32 data) +{ + /* Configuration interface broken? */ + u32 val; + + printk("%s: writing %08x to %08x\n", __func__, data, devfn); + + devfn |= SYS_CFG_START | SYS_CFG_WRITE; + + spin_lock(&v2m_cfg_lock); + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT)); + + writel(data, MMIO_P2V(V2M_SYS_CFGDATA)); + writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + + do { + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + } while (val == 0); + spin_unlock(&v2m_cfg_lock); + + return !!(val & SYS_CFG_ERR); +} + +int v2m_cfg_read(u32 devfn, u32 *data) +{ + u32 val; + + devfn |= SYS_CFG_START; + + spin_lock(&v2m_cfg_lock); + writel(0, MMIO_P2V(V2M_SYS_CFGSTAT)); + writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + + mb(); + + do { + cpu_relax(); + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + } while (val == 0); + + *data = readl(MMIO_P2V(V2M_SYS_CFGDATA)); + spin_unlock(&v2m_cfg_lock); + + return !!(val & SYS_CFG_ERR); +} + + +static struct resource v2m_pcie_i2c_resource = { + .start = V2M_SERIAL_BUS_PCI, + .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device v2m_pcie_i2c_device = { + .name = "versatile-i2c", + .id = 0, + .num_resources = 1, + .resource = &v2m_pcie_i2c_resource, +}; + +static struct resource v2m_ddc_i2c_resource = { + .start = V2M_SERIAL_BUS_DVI, + .end = V2M_SERIAL_BUS_DVI + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device v2m_ddc_i2c_device = { + .name = "versatile-i2c", + .id = 1, + .num_resources = 1, + .resource = &v2m_ddc_i2c_resource, +}; + +static struct resource v2m_eth_resources[] = { + { + .start = V2M_LAN9118, + .end = V2M_LAN9118 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_V2M_LAN9118, + .end = IRQ_V2M_LAN9118, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config v2m_eth_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device v2m_eth_device = { + .name = "smsc911x", + .id = -1, + .resource = v2m_eth_resources, + .num_resources = ARRAY_SIZE(v2m_eth_resources), + .dev.platform_data = &v2m_eth_config, +}; + +static struct resource v2m_usb_resources[] = { + { + .start = V2M_ISP1761, + .end = V2M_ISP1761 + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_V2M_ISP1761, + .end = IRQ_V2M_ISP1761, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data v2m_usb_config = { + .is_isp1761 = true, + .bus_width_16 = false, + .port1_otg = true, + .analog_oc = false, + .dack_polarity_high = false, + .dreq_polarity_high = false, +}; + +static struct platform_device v2m_usb_device = { + .name = "isp1760", + .id = -1, + .resource = v2m_usb_resources, + .num_resources = ARRAY_SIZE(v2m_usb_resources), + .dev.platform_data = &v2m_usb_config, +}; + +static int v2m_flash_init(void) +{ + writel(0, MMIO_P2V(V2M_SYS_FLASH)); + return 0; +} + +static void v2m_flash_exit(void) +{ + writel(0, MMIO_P2V(V2M_SYS_FLASH)); +} + +static void v2m_flash_set_vpp(int on) +{ + writel(on != 0, MMIO_P2V(V2M_SYS_FLASH)); +} + +static struct flash_platform_data v2m_flash_data = { + .map_name = "cfi_probe", + .width = 4, + .init = v2m_flash_init, + .exit = v2m_flash_exit, + .set_vpp = v2m_flash_set_vpp, +}; + +static struct resource v2m_flash_resources[] = { + { + .start = V2M_NOR0, + .end = V2M_NOR0 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = V2M_NOR1, + .end = V2M_NOR1 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_flash_device = { + .name = "armflash", + .id = -1, + .resource = v2m_flash_resources, + .num_resources = ARRAY_SIZE(v2m_flash_resources), + .dev.platform_data = &v2m_flash_data, +}; + + +static unsigned int v2m_mmci_status(struct device *dev) +{ + return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0)); +} + +static struct mmci_platform_data v2m_mmci_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = v2m_mmci_status, +}; + +static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); +static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); +static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); +static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); +static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); +static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); +static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); +static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); +static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); +static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); + +static struct amba_device *v2m_amba_devs[] __initdata = { + &aaci_device, + &mmci_device, + &kmi0_device, + &kmi1_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &wdt_device, + &rtc_device, +}; + + +static long v2m_osc_round(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int v2m_osc1_set(struct clk *clk, unsigned long rate) +{ + return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate); +} + +static const struct clk_ops osc1_clk_ops = { + .round = v2m_osc_round, + .set = v2m_osc1_set, +}; + +static struct clk osc1_clk = { + .ops = &osc1_clk_ops, + .rate = 24000000, +}; + +static struct clk osc2_clk = { + .rate = 24000000, +}; + +static struct clk_lookup v2m_lookups[] = { + { /* UART0 */ + .dev_id = "mb:uart0", + .clk = &osc2_clk, + }, { /* UART1 */ + .dev_id = "mb:uart1", + .clk = &osc2_clk, + }, { /* UART2 */ + .dev_id = "mb:uart2", + .clk = &osc2_clk, + }, { /* UART3 */ + .dev_id = "mb:uart3", + .clk = &osc2_clk, + }, { /* KMI0 */ + .dev_id = "mb:kmi0", + .clk = &osc2_clk, + }, { /* KMI1 */ + .dev_id = "mb:kmi1", + .clk = &osc2_clk, + }, { /* MMC0 */ + .dev_id = "mb:mmci", + .clk = &osc2_clk, + }, { /* CLCD */ + .dev_id = "mb:clcd", + .clk = &osc1_clk, + }, +}; + +static void v2m_power_off(void) +{ + if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) + printk(KERN_EMERG "Unable to shutdown\n"); +} + +static void v2m_restart(char str, const char *cmd) +{ + if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) + printk(KERN_EMERG "Unable to reboot\n"); +} + +static int __init v2m_init(void) +{ + int i; + + clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + + platform_device_register(&v2m_pcie_i2c_device); + platform_device_register(&v2m_ddc_i2c_device); + platform_device_register(&v2m_flash_device); + platform_device_register(&v2m_eth_device); + platform_device_register(&v2m_usb_device); + + for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) + amba_device_register(v2m_amba_devs[i], &iomem_resource); + + pm_power_off = v2m_power_off; + arm_pm_restart = v2m_restart; + + return 0; +} +arch_initcall(v2m_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c4ed9f93f64..33027301639 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -754,7 +754,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4 + REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 default y select OUTER_CACHE help @@ -781,3 +782,22 @@ config ARM_L1_CACHE_SHIFT int default 6 if ARM_L1_CACHE_SHIFT_6 default 5 + +config ARM_DMA_MEM_BUFFERABLE + bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7 + default y if CPU_V6 || CPU_V7 + help + Historically, the kernel has used strongly ordered mappings to + provide DMA coherent memory. With the advent of ARMv7, mapping + memory with differing types results in unpredictable behaviour, + so on these CPUs, this option is forced on. + + Multiple mappings with differing attributes is also unpredictable + on ARMv6 CPUs, but since they do not have aggressive speculative + prefetch, no harm appears to occur. + + However, drivers may be missing the necessary barriers for ARMv6, + and therefore turning this on may result in unpredictable driver + behaviour. Therefore, we offer this as an option. + + You are recommended say 'Y' here and debug any affected drivers. diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index edddd66faac..28b7c277619 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/string.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/uaccess.h> @@ -94,36 +95,29 @@ static const char *usermode_action[] = { "signal+warn" }; -static int -proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int alignment_proc_show(struct seq_file *m, void *v) { - char *p = page; - int len; - - p += sprintf(p, "User:\t\t%lu\n", ai_user); - p += sprintf(p, "System:\t\t%lu\n", ai_sys); - p += sprintf(p, "Skipped:\t%lu\n", ai_skipped); - p += sprintf(p, "Half:\t\t%lu\n", ai_half); - p += sprintf(p, "Word:\t\t%lu\n", ai_word); + seq_printf(m, "User:\t\t%lu\n", ai_user); + seq_printf(m, "System:\t\t%lu\n", ai_sys); + seq_printf(m, "Skipped:\t%lu\n", ai_skipped); + seq_printf(m, "Half:\t\t%lu\n", ai_half); + seq_printf(m, "Word:\t\t%lu\n", ai_word); if (cpu_architecture() >= CPU_ARCH_ARMv5TE) - p += sprintf(p, "DWord:\t\t%lu\n", ai_dword); - p += sprintf(p, "Multi:\t\t%lu\n", ai_multi); - p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode, + seq_printf(m, "DWord:\t\t%lu\n", ai_dword); + seq_printf(m, "Multi:\t\t%lu\n", ai_multi); + seq_printf(m, "User faults:\t%i (%s)\n", ai_usermode, usermode_action[ai_usermode]); - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; + return 0; +} - return len; +static int alignment_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, alignment_proc_show, NULL); } -static int proc_alignment_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t alignment_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { char mode; @@ -136,6 +130,13 @@ static int proc_alignment_write(struct file *file, const char __user *buffer, return count; } +static const struct file_operations alignment_proc_fops = { + .open = alignment_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = alignment_proc_write, +}; #endif /* CONFIG_PROC_FS */ union offset_union { @@ -901,12 +902,10 @@ static int __init alignment_init(void) #ifdef CONFIG_PROC_FS struct proc_dir_entry *res; - res = create_proc_entry("cpu/alignment", S_IWUSR | S_IRUGO, NULL); + res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL, + &alignment_proc_fops); if (!res) return -ENOMEM; - - res->read_proc = proc_alignment_read; - res->write_proc = proc_alignment_write; #endif /* diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 07334632d3e..78f0fc8595e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -27,6 +27,7 @@ static void __iomem *l2x0_base; static DEFINE_SPINLOCK(l2x0_lock); +static uint32_t l2x0_way_mask; /* Bitmask of active ways */ static inline void cache_wait(void __iomem *reg, unsigned long mask) { @@ -99,8 +100,8 @@ static inline void l2x0_inv_all(void) /* invalidate all ways */ spin_lock_irqsave(&l2x0_lock, flags); - writel(0xff, l2x0_base + L2X0_INV_WAY); - cache_wait(l2x0_base + L2X0_INV_WAY, 0xff); + writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); + cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -199,9 +200,37 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; + __u32 cache_id; + int ways; + const char *type; l2x0_base = base; + cache_id = readl(l2x0_base + L2X0_CACHE_ID); + aux = readl(l2x0_base + L2X0_AUX_CTRL); + + /* Determine the number of ways */ + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + case L2X0_CACHE_ID_PART_L310: + if (aux & (1 << 16)) + ways = 16; + else + ways = 8; + type = "L310"; + break; + case L2X0_CACHE_ID_PART_L210: + ways = (aux >> 13) & 0xf; + type = "L210"; + break; + default: + /* Assume unknown chips have 8 ways */ + ways = 8; + type = "L2x0 series"; + break; + } + + l2x0_way_mask = (1 << ways) - 1; + /* * Check if l2x0 controller is already enabled. * If you are booting from non-secure mode @@ -210,8 +239,6 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) if (!(readl(l2x0_base + L2X0_CTRL) & 1)) { /* l2x0 controller is disabled */ - - aux = readl(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; writel(aux, l2x0_base + L2X0_AUX_CTRL); @@ -226,5 +253,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) outer_cache.clean_range = l2x0_clean_range; outer_cache.flush_range = l2x0_flush_range; - printk(KERN_INFO "L2X0 cache controller enabled\n"); + printk(KERN_INFO "%s cache controller enabled\n", type); + printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + ways, cache_id, aux); } diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index c9b97e9836a..82df01a72f4 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -133,8 +133,6 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, flush_dcache_mmap_unlock(mapping); if (aliases) do_adjust_pte(vma, addr, pfn, ptep); - else - flush_cache_page(vma, addr, pfn); } /* diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 9d40c341e07..92f5801f99c 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -463,7 +463,12 @@ static struct fsr_info { { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, { do_bad, SIGKILL, 0, "terminal exception" }, { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, +/* Do we need runtime check ? */ +#if __LINUX_ARM_ARCH__ < 6 { do_bad, SIGBUS, 0, "external abort on linefetch" }, +#else + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "I-cache maintenance fault" }, +#endif { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, { do_bad, SIGBUS, 0, "external abort on linefetch" }, { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7829cb5425f..105d1d4f420 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,7 +15,6 @@ #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> -#include <linux/sort.h> #include <linux/highmem.h> #include <asm/mach-types.h> @@ -226,20 +225,6 @@ static int __init check_initrd(struct meminfo *mi) return initrd_node; } -static inline void map_memory_bank(struct membank *bank) -{ -#ifdef CONFIG_MMU - struct map_desc map; - - map.pfn = bank_pfn_start(bank); - map.virtual = __phys_to_virt(bank_phys_start(bank)); - map.length = bank_phys_size(bank); - map.type = MT_MEMORY; - - create_mapping(&map); -#endif -} - static void __init bootmem_init_node(int node, struct meminfo *mi, unsigned long start_pfn, unsigned long end_pfn) { @@ -249,16 +234,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi, int i; /* - * Map the memory banks for this node. - */ - for_each_nodebank(i, mi, node) { - struct membank *bank = &mi->bank[i]; - - if (!bank->highmem) - map_memory_bank(bank); - } - - /* * Allocate the bootmem bitmap page. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); @@ -387,21 +362,12 @@ static void arm_memory_present(struct meminfo *mi, int node) } #endif -static int __init meminfo_cmp(const void *_a, const void *_b) -{ - const struct membank *a = _a, *b = _b; - long cmp = bank_pfn_start(a) - bank_pfn_start(b); - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; -} - void __init bootmem_init(void) { struct meminfo *mi = &meminfo; unsigned long min, max_low, max_high; int node, initrd_node; - sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL); - /* * Locate which node contains the ramdisk image, if any. */ diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index a888363398f..815d08eecbb 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -28,10 +28,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif -struct map_desc; -struct meminfo; struct pglist_data; -void __init create_mapping(struct map_desc *md); void __init bootmem_init(void); void reserve_node_zero(struct pglist_data *pgdat); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d4da6ac28e..69852003675 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -14,6 +14,7 @@ #include <linux/bootmem.h> #include <linux/mman.h> #include <linux/nodemask.h> +#include <linux/sort.h> #include <asm/cputype.h> #include <asm/mach-types.h> @@ -599,7 +600,7 @@ static void __init create_36bit_mapping(struct map_desc *md, * offsets, and we take full advantage of sections and * supersections. */ -void __init create_mapping(struct map_desc *md) +static void __init create_mapping(struct map_desc *md) { unsigned long phys, addr, length, end; const struct mem_type *type; @@ -1013,6 +1014,39 @@ static void __init kmap_init(void) #endif } +static inline void map_memory_bank(struct membank *bank) +{ + struct map_desc map; + + map.pfn = bank_pfn_start(bank); + map.virtual = __phys_to_virt(bank_phys_start(bank)); + map.length = bank_phys_size(bank); + map.type = MT_MEMORY; + + create_mapping(&map); +} + +static void __init map_lowmem(void) +{ + struct meminfo *mi = &meminfo; + int i; + + /* Map all the lowmem memory banks. */ + for (i = 0; i < mi->nr_banks; i++) { + struct membank *bank = &mi->bank[i]; + + if (!bank->highmem) + map_memory_bank(bank); + } +} + +static int __init meminfo_cmp(const void *_a, const void *_b) +{ + const struct membank *a = _a, *b = _b; + long cmp = bank_pfn_start(a) - bank_pfn_start(b); + return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. @@ -1021,9 +1055,12 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); + build_mem_type_table(); sanity_check_meminfo(); prepare_page_table(); + map_lowmem(); bootmem_init(); devicemaps_init(mdesc); kmap_init(); diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c index 4c0ab50f399..cb7658e8acc 100644 --- a/arch/arm/nwfpe/fpmodule.c +++ b/arch/arm/nwfpe/fpmodule.c @@ -24,6 +24,7 @@ #include "fpa11.h" #include <linux/module.h> +#include <linux/moduleparam.h> /* XXX */ #include <linux/errno.h> @@ -134,13 +135,17 @@ a SIGFPE exception if necessary. If not the relevant bits in the cumulative exceptions flag byte are set and we return. */ +#ifdef CONFIG_DEBUG_USER +/* By default, ignore inexact errors as there are far too many of them to log */ +static int debug = ~BIT_IXC; +#endif + void float_raise(signed char flags) { register unsigned int fpsr, cumulativeTraps; #ifdef CONFIG_DEBUG_USER - /* Ignore inexact errors as there are far too many of them to log */ - if (flags & ~BIT_IXC) + if (flags & debug) printk(KERN_DEBUG "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", current->comm, current->pid, flags, @@ -179,3 +184,7 @@ module_exit(fpe_exit); MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>"); MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)"); MODULE_LICENSE("GPL"); + +#ifdef CONFIG_DEBUG_USER +module_param(debug, int, 0644); +#endif diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 36bff032595..69b09c1cec8 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_IOP32X) += time.o obj-$(CONFIG_ARCH_IOP32X) += io.o obj-$(CONFIG_ARCH_IOP32X) += cp6.o obj-$(CONFIG_ARCH_IOP32X) += adma.o +obj-$(CONFIG_ARCH_IOP32X) += pmu.o # IOP33X obj-$(CONFIG_ARCH_IOP33X) += gpio.o @@ -23,6 +24,7 @@ obj-$(CONFIG_ARCH_IOP33X) += time.o obj-$(CONFIG_ARCH_IOP33X) += io.o obj-$(CONFIG_ARCH_IOP33X) += cp6.o obj-$(CONFIG_ARCH_IOP33X) += adma.o +obj-$(CONFIG_ARCH_IOP33X) += pmu.o # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c new file mode 100644 index 00000000000..a2024b8685a --- /dev/null +++ b/arch/arm/plat-iop/pmu.c @@ -0,0 +1,40 @@ +/* + * PMU IRQ registration for the iop3xx xscale PMU families. + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <asm/pmu.h> +#include <mach/irqs.h> + +static struct resource pmu_resource = { +#ifdef CONFIG_ARCH_IOP32X + .start = IRQ_IOP32X_CORE_PMU, + .end = IRQ_IOP32X_CORE_PMU, +#endif +#ifdef CONFIG_ARCH_IOP33X + .start = IRQ_IOP33X_CORE_PMU, + .end = IRQ_IOP33X_CORE_PMU, +#endif + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pmu_resource, + .num_resources = 1, +}; + +static int __init iop3xx_pmu_init(void) +{ + platform_device_register(&pmu_device); + return 0; +} + +arch_initcall(iop3xx_pmu_init); diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 159daf583f8..5da3f97c537 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -19,4 +19,9 @@ config HAS_MTU to multiple interrupt generating programmable 32-bit free running decrementing counters. +config NOMADIK_GPIO + bool + help + Support for the Nomadik GPIO controller. + endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile index 37c7cdd0f8f..c33547361bd 100644 --- a/arch/arm/plat-nomadik/Makefile +++ b/arch/arm/plat-nomadik/Makefile @@ -3,3 +3,4 @@ # Licensed under GPLv2 obj-$(CONFIG_HAS_MTU) += timer.o +obj-$(CONFIG_NOMADIK_GPIO) += gpio.o diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 9a09b2791e0..d28900cfa54 100644 --- a/arch/arm/mach-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -13,8 +13,10 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> -#include <linux/amba/bus.h> +#include <linux/platform_device.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> #include <linux/gpio.h> #include <linux/spinlock.h> #include <linux/interrupt.h> @@ -35,8 +37,9 @@ struct nmk_gpio_chip { struct gpio_chip chip; void __iomem *addr; + struct clk *clk; unsigned int parent_irq; - spinlock_t *lock; + spinlock_t lock; /* Keep track of configured edges */ u32 edge_rising; u32 edge_falling; @@ -107,40 +110,37 @@ static void nmk_gpio_irq_ack(unsigned int irq) writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); } -static void nmk_gpio_irq_mask(unsigned int irq) +static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, + int gpio, bool enable) { - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask, reg; - - gpio = NOMADIK_IRQ_TO_GPIO(irq); - nmk_chip = get_irq_chip_data(irq); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return; + u32 bitmask = nmk_gpio_get_bitmask(gpio); + u32 reg; - /* we must individually clear the two edges */ - spin_lock_irqsave(&nmk_chip->lock, flags); + /* we must individually set/clear the two edges */ if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); - reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC); + reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC); + if (enable) + reg |= bitmask; + else + reg &= ~bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC); } if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); - reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC); + reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC); + if (enable) + reg |= bitmask; + else + reg &= ~bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC); } - spin_unlock_irqrestore(&nmk_chip->lock, flags); -}; +} -static void nmk_gpio_irq_unmask(unsigned int irq) +static void nmk_gpio_irq_modify(unsigned int irq, bool enable) { int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; - u32 bitmask, reg; + u32 bitmask; gpio = NOMADIK_IRQ_TO_GPIO(irq); nmk_chip = get_irq_chip_data(irq); @@ -148,23 +148,24 @@ static void nmk_gpio_irq_unmask(unsigned int irq) if (!nmk_chip) return; - /* we must individually set the two edges */ spin_lock_irqsave(&nmk_chip->lock, flags); - if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); - reg |= bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC); - } - if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); - reg |= bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC); - } + __nmk_gpio_irq_modify(nmk_chip, gpio, enable); spin_unlock_irqrestore(&nmk_chip->lock, flags); } +static void nmk_gpio_irq_mask(unsigned int irq) +{ + nmk_gpio_irq_modify(irq, false); +}; + +static void nmk_gpio_irq_unmask(unsigned int irq) +{ + nmk_gpio_irq_modify(irq, true); +} + static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) { + bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED); int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; @@ -183,19 +184,21 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) spin_lock_irqsave(&nmk_chip->lock, flags); + if (enabled) + __nmk_gpio_irq_modify(nmk_chip, gpio, false); + nmk_chip->edge_rising &= ~bitmask; if (type & IRQ_TYPE_EDGE_RISING) nmk_chip->edge_rising |= bitmask; - writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC); nmk_chip->edge_falling &= ~bitmask; if (type & IRQ_TYPE_EDGE_FALLING) nmk_chip->edge_falling |= bitmask; - writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC); - spin_unlock_irqrestore(&nmk_chip->lock, flags); + if (enabled) + __nmk_gpio_irq_modify(nmk_chip, gpio, true); - nmk_gpio_irq_unmask(irq); + spin_unlock_irqrestore(&nmk_chip->lock, flags); return 0; } @@ -211,21 +214,27 @@ static struct irq_chip nmk_gpio_irq_chip = { static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip; + struct irq_chip *host_chip = get_irq_chip(irq); unsigned int gpio_irq; u32 pending; unsigned int first_irq; + if (host_chip->mask_ack) + host_chip->mask_ack(irq); + else { + host_chip->mask(irq); + if (host_chip->ack) + host_chip->ack(irq); + } + nmk_chip = get_irq_data(irq); first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { gpio_irq = first_irq + __ffs(pending); generic_handle_irq(gpio_irq); } - if (0) {/* don't ack parent irq, as ack == disable */ - host_chip = get_irq_chip(irq); - host_chip->ack(irq); - } + + host_chip->unmask(irq); } static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) @@ -239,6 +248,7 @@ static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) set_irq_handler(i, handle_edge_irq); set_irq_flags(i, IRQF_VALID); set_irq_chip_data(i, nmk_chip); + set_irq_type(i, IRQ_TYPE_EDGE_FALLING); } set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); set_irq_data(nmk_chip->parent_irq, nmk_chip); @@ -297,30 +307,59 @@ static struct gpio_chip nmk_gpio_template = { .can_sleep = 0, }; -static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) +static int __init nmk_gpio_probe(struct platform_device *dev) { - struct nmk_gpio_platform_data *pdata; + struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; struct nmk_gpio_chip *nmk_chip; struct gpio_chip *chip; + struct resource *res; + struct clk *clk; + int irq; int ret; - pdata = dev->dev.platform_data; - ret = amba_request_regions(dev, pdata->name); - if (ret) - return ret; + if (!pdata) + return -ENODEV; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + ret = irq; + goto out; + } + + if (request_mem_region(res->start, resource_size(res), + dev_name(&dev->dev)) == NULL) { + ret = -EBUSY; + goto out; + } + + clk = clk_get(&dev->dev, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto out_release; + } + + clk_enable(clk); nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); if (!nmk_chip) { ret = -ENOMEM; - goto out_amba; + goto out_clk; } /* * The virt address in nmk_chip->addr is in the nomadik register space, * so we can simply convert the resource address, without remapping */ - nmk_chip->addr = io_p2v(dev->res.start); + nmk_chip->clk = clk; + nmk_chip->addr = io_p2v(res->start); nmk_chip->chip = nmk_gpio_template; - nmk_chip->parent_irq = pdata->parent_irq; + nmk_chip->parent_irq = irq; + spin_lock_init(&nmk_chip->lock); chip = &nmk_chip->chip; chip->base = pdata->first_gpio; @@ -332,7 +371,7 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) if (ret) goto out_free; - amba_set_drvdata(dev, nmk_chip); + platform_set_drvdata(dev, nmk_chip); nmk_gpio_init_irq(nmk_chip); @@ -340,51 +379,50 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); return 0; - out_free: +out_free: kfree(nmk_chip); - out_amba: - amba_release_regions(dev); +out_clk: + clk_disable(clk); + clk_put(clk); +out_release: + release_mem_region(res->start, resource_size(res)); +out: dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, pdata->first_gpio, pdata->first_gpio+31); return ret; } -static int nmk_gpio_remove(struct amba_device *dev) +static int __exit nmk_gpio_remove(struct platform_device *dev) { struct nmk_gpio_chip *nmk_chip; + struct resource *res; - nmk_chip = amba_get_drvdata(dev); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + + nmk_chip = platform_get_drvdata(dev); gpiochip_remove(&nmk_chip->chip); + clk_disable(nmk_chip->clk); + clk_put(nmk_chip->clk); kfree(nmk_chip); - amba_release_regions(dev); + release_mem_region(res->start, resource_size(res)); return 0; } -/* We have 0x1f080060 and 0x1f180060, accept both using the mask */ -static struct amba_id nmk_gpio_ids[] = { - { - .id = 0x1f080060, - .mask = 0xffefffff, - }, - {0, 0}, -}; - -static struct amba_driver nmk_gpio_driver = { - .drv = { +static struct platform_driver nmk_gpio_driver = { + .driver = { .owner = THIS_MODULE, .name = "gpio", }, .probe = nmk_gpio_probe, - .remove = nmk_gpio_remove, + .remove = __exit_p(nmk_gpio_remove), .suspend = NULL, /* to be done */ .resume = NULL, - .id_table = nmk_gpio_ids, }; static int __init nmk_gpio_init(void) { - return amba_driver_register(&nmk_gpio_driver); + return platform_driver_register(&nmk_gpio_driver); } arch_initcall(nmk_gpio_init); diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h new file mode 100644 index 00000000000..4200811249c --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -0,0 +1,70 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PLAT_GPIO_H +#define __ASM_PLAT_GPIO_H + +#include <asm-generic/gpio.h> + +/* + * These currently cause a function call to happen, they may be optimized + * if needed by adding cpu-specific defines to identify blocks + * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) + */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 + +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +extern int nmk_gpio_set_mode(int gpio, int gpio_mode); +extern int nmk_gpio_get_mode(int gpio); + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; +}; + +#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index fa7cb3a57cb..0ff3798769a 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -2,7 +2,7 @@ * linux/arch/arm/mach-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x + * Copyright (C) 2010 Alessandro Rubini * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as @@ -18,123 +18,150 @@ #include <plat/mtu.h> -static u32 nmdk_count; /* accumulated count */ -static u32 nmdk_cycle; /* write-once */ - -/* setup by the platform code */ -void __iomem *mtu_base; +void __iomem *mtu_base; /* ssigned by machine code */ /* - * clocksource: the MTU device is a decrementing counters, so we negate - * the value being read. + * Kernel assumes that sched_clock can be called early + * but the MTU may not yet be initialized. */ -static cycle_t nmdk_read_timer(struct clocksource *cs) +static cycle_t nmdk_read_timer_dummy(struct clocksource *cs) { - u32 count = readl(mtu_base + MTU_VAL(0)); - return nmdk_count + nmdk_cycle - count; + return 0; +} +/* clocksource: MTU decrements, so we negate the value being read. */ +static cycle_t nmdk_read_timer(struct clocksource *cs) +{ + return -readl(mtu_base + MTU_VAL(0)); } static struct clocksource nmdk_clksrc = { .name = "mtu_0", - .rating = 120, - .read = nmdk_read_timer, + .rating = 200, + .read = nmdk_read_timer_dummy, + .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* - * Clockevent device: currently only periodic mode is supported + * Override the global weak sched_clock symbol with this + * local implementation which uses the clocksource to get some + * better resolution when scheduling the kernel. We accept that + * this wraps around for now, since it is just a relative time + * stamp. (Inspired by OMAP implementation.) */ +unsigned long long notrace sched_clock(void) +{ + return clocksource_cyc2ns(nmdk_clksrc.read( + &nmdk_clksrc), + nmdk_clksrc.mult, + nmdk_clksrc.shift); +} + +/* Clockevent device: use one-shot mode */ static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { + u32 cr; + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* count current value? */ - writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); + pr_err("%s: periodic mode not supported\n", __func__); break; case CLOCK_EVT_MODE_ONESHOT: - BUG(); /* Not supported, yet */ - /* FALLTHROUGH */ + /* Load highest value, enable device, enable interrupts */ + cr = readl(mtu_base + MTU_CR(1)); + writel(0, mtu_base + MTU_LR(1)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); + writel(0x2, mtu_base + MTU_IMSC); + break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: - writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); + /* disable irq */ + writel(0, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_RESUME: break; } } +static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) +{ + /* writing the value has immediate effect */ + writel(evt, mtu_base + MTU_LR(1)); + return 0; +} + static struct clock_event_device nmdk_clkevt = { - .name = "mtu_0", - .features = CLOCK_EVT_FEAT_PERIODIC, + .name = "mtu_1", + .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, - .rating = 100, + .rating = 200, .set_mode = nmdk_clkevt_mode, + .set_next_event = nmdk_clkevt_next, }; /* - * IRQ Handler for the timer 0 of the MTU block. The irq is not shared - * as we are the only users of mtu0 by now. + * IRQ Handler for timer 1 of the MTU block. */ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) { - /* ack: "interrupt clear register" */ - writel(1 << 0, mtu_base + MTU_ICR); - - /* we can't count lost ticks, unfortunately */ - nmdk_count += nmdk_cycle; - nmdk_clkevt.event_handler(&nmdk_clkevt); + struct clock_event_device *evdev = dev_id; + writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ + evdev->event_handler(evdev); return IRQ_HANDLED; } -/* - * Set up timer interrupt, and return the current time in seconds. - */ static struct irqaction nmdk_timer_irq = { .name = "Nomadik Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = nmdk_timer_interrupt, + .dev_id = &nmdk_clkevt, }; -static void nmdk_timer_reset(void) -{ - u32 cr; - - writel(0, mtu_base + MTU_CR(0)); /* off */ - - /* configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; - writel(cr, mtu_base + MTU_CR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); -} - void __init nmdk_timer_init(void) { unsigned long rate; - int bits; - - rate = CLOCK_TICK_RATE; /* 2.4MHz */ - nmdk_cycle = (rate + HZ/2) / HZ; + u32 cr = MTU_CRn_32BITS;; + + /* + * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: + * use a divide-by-16 counter if it's more than 16MHz + */ + rate = CLOCK_TICK_RATE; + if (rate > 16 << 20) { + rate /= 16; + cr |= MTU_CRn_PRESCALE_16; + } else { + cr |= MTU_CRn_PRESCALE_1; + } - /* Init the timer and register clocksource */ - nmdk_timer_reset(); + /* Timer 0 is the free running clocksource */ + writel(cr, mtu_base + MTU_CR(0)); + writel(0, mtu_base + MTU_LR(0)); + writel(0, mtu_base + MTU_BGLR(0)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); - bits = 8*sizeof(nmdk_count); - nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); + /* Now the scheduling clock is ready */ + nmdk_clksrc.read = nmdk_read_timer; if (clocksource_register(&nmdk_clksrc)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", nmdk_clksrc.name); + pr_err("timer: failed to initialize clock source %s\n", + nmdk_clksrc.name); + + /* Timer 1 is used for events, fix according to rate */ + writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ + nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &nmdk_clkevt); + nmdk_clkevt.min_delta_ns = + clockevent_delta2ns(0x00000002, &nmdk_clkevt); + nmdk_clkevt.cpumask = cpumask_of(0); /* Register irq and clockevents */ setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); - nmdk_clkevt.cpumask = cpumask_of(0); clockevents_register_device(&nmdk_clkevt); } diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 0264bfb0ca4..f68da35f4fb 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -2,7 +2,7 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o +obj-y := dma.o pmu.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c new file mode 100644 index 00000000000..267ceb6feb2 --- /dev/null +++ b/arch/arm/plat-pxa/pmu.c @@ -0,0 +1,33 @@ +/* + * PMU IRQ registration for the PXA xscale PMU families. + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <asm/pmu.h> +#include <mach/irqs.h> + +static struct resource pmu_resource = { + .start = IRQ_PMU, + .end = IRQ_PMU, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pmu_resource, + .num_resources = 1, +}; + +static int __init pxa_pmu_init(void) +{ + platform_device_register(&pmu_device); + return 0; +} +arch_initcall(pxa_pmu_init); diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig new file mode 100644 index 00000000000..1bb3dbce881 --- /dev/null +++ b/arch/arm/plat-spear/Kconfig @@ -0,0 +1,31 @@ +# +# SPEAr Platform configuration file +# + +if PLAT_SPEAR + +choice + prompt "ST SPEAr Family" + default ARCH_SPEAR3XX + +config ARCH_SPEAR3XX + bool "SPEAr3XX" + select ARM_VIC + select CPU_ARM926T + help + Supports for ARM's SPEAR3XX family + +config ARCH_SPEAR6XX + bool "SPEAr6XX" + select ARM_VIC + select CPU_ARM926T + help + Supports for ARM's SPEAR6XX family + +endchoice + +# Adding SPEAr machine specific configuration files +source "arch/arm/mach-spear3xx/Kconfig" +source "arch/arm/mach-spear6xx/Kconfig" + +endif diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile new file mode 100644 index 00000000000..eb89540aeda --- /dev/null +++ b/arch/arm/plat-spear/Makefile @@ -0,0 +1,8 @@ +# +# SPEAr Platform specific Makefile +# + +# Common support +obj-y := clock.o padmux.o time.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c new file mode 100644 index 00000000000..ee4f90e534d --- /dev/null +++ b/arch/arm/plat-spear/clock.c @@ -0,0 +1,435 @@ +/* + * arch/arm/plat-spear/clock.c + * + * Clock framework for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <mach/misc_regs.h> +#include <plat/clock.h> + +static DEFINE_SPINLOCK(clocks_lock); +static LIST_HEAD(root_clks); + +static void propagate_rate(struct list_head *); + +static int generic_clk_enable(struct clk *clk) +{ + unsigned int val; + + if (!clk->en_reg) + return -EFAULT; + + val = readl(clk->en_reg); + if (unlikely(clk->flags & RESET_TO_ENABLE)) + val &= ~(1 << clk->en_reg_bit); + else + val |= 1 << clk->en_reg_bit; + + writel(val, clk->en_reg); + + return 0; +} + +static void generic_clk_disable(struct clk *clk) +{ + unsigned int val; + + if (!clk->en_reg) + return; + + val = readl(clk->en_reg); + if (unlikely(clk->flags & RESET_TO_ENABLE)) + val |= 1 << clk->en_reg_bit; + else + val &= ~(1 << clk->en_reg_bit); + + writel(val, clk->en_reg); +} + +/* generic clk ops */ +static struct clkops generic_clkops = { + .enable = generic_clk_enable, + .disable = generic_clk_disable, +}; + +/* + * clk_enable - inform the system when the clock source should be running. + * @clk: clock source + * + * If the clock can not be enabled/disabled, this should return success. + * + * Returns success (0) or negative errno. + */ +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret = 0; + + if (!clk || IS_ERR(clk)) + return -EFAULT; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->usage_count == 0) { + if (clk->ops && clk->ops->enable) + ret = clk->ops->enable(clk); + } + clk->usage_count++; + spin_unlock_irqrestore(&clocks_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +/* + * clk_disable - inform the system when the clock source is no longer required. + * @clk: clock source + * + * Inform the system that a clock source is no longer required by + * a driver and may be shut down. + * + * Implementation detail: if the clock source is shared between + * multiple drivers, clk_enable() calls must be balanced by the + * same number of clk_disable() calls for the clock source to be + * disabled. + */ +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (!clk || IS_ERR(clk)) + return; + + WARN_ON(clk->usage_count == 0); + + spin_lock_irqsave(&clocks_lock, flags); + clk->usage_count--; + if (clk->usage_count == 0) { + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + } + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +/** + * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. + * This is only valid once the clock source has been enabled. + * @clk: clock source + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags, rate; + + spin_lock_irqsave(&clocks_lock, flags); + rate = clk->rate; + spin_unlock_irqrestore(&clocks_lock, flags); + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/** + * clk_set_parent - set the parent clock source for this clock + * @clk: clock source + * @parent: parent clock source + * + * Returns success (0) or negative errno. + */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int i, found = 0, val = 0; + unsigned long flags; + + if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent)) + return -EFAULT; + if (clk->usage_count) + return -EBUSY; + if (!clk->pclk_sel) + return -EPERM; + if (clk->pclk == parent) + return 0; + + for (i = 0; i < clk->pclk_sel->pclk_count; i++) { + if (clk->pclk_sel->pclk_info[i].pclk == parent) { + found = 1; + break; + } + } + + if (!found) + return -EINVAL; + + spin_lock_irqsave(&clocks_lock, flags); + /* reflect parent change in hardware */ + val = readl(clk->pclk_sel->pclk_sel_reg); + val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift); + val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift; + writel(val, clk->pclk_sel->pclk_sel_reg); + spin_unlock_irqrestore(&clocks_lock, flags); + + /* reflect parent change in software */ + clk->recalc(clk); + propagate_rate(&clk->children); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +/* registers clock in platform clock framework */ +void clk_register(struct clk_lookup *cl) +{ + struct clk *clk = cl->clk; + unsigned long flags; + + if (!clk || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clocks_lock, flags); + + INIT_LIST_HEAD(&clk->children); + if (clk->flags & ALWAYS_ENABLED) + clk->ops = NULL; + else if (!clk->ops) + clk->ops = &generic_clkops; + + /* root clock don't have any parents */ + if (!clk->pclk && !clk->pclk_sel) { + list_add(&clk->sibling, &root_clks); + /* add clocks with only one parent to parent's children list */ + } else if (clk->pclk && !clk->pclk_sel) { + list_add(&clk->sibling, &clk->pclk->children); + } else { + /* add clocks with > 1 parent to 1st parent's children list */ + list_add(&clk->sibling, + &clk->pclk_sel->pclk_info[0].pclk->children); + } + spin_unlock_irqrestore(&clocks_lock, flags); + + /* add clock to arm clockdev framework */ + clkdev_add(cl); +} + +/** + * propagate_rate - recalculate and propagate all clocks in list head + * + * Recalculates all root clocks in list head, which if the clock's .recalc is + * set correctly, should also propagate their rates. + */ +static void propagate_rate(struct list_head *lhead) +{ + struct clk *clkp, *_temp; + + list_for_each_entry_safe(clkp, _temp, lhead, sibling) { + if (clkp->recalc) + clkp->recalc(clkp); + propagate_rate(&clkp->children); + } +} + +/* returns current programmed clocks clock info structure */ +static struct pclk_info *pclk_info_get(struct clk *clk) +{ + unsigned int mask, i; + unsigned long flags; + struct pclk_info *info = NULL; + + spin_lock_irqsave(&clocks_lock, flags); + mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) + & clk->pclk_sel->pclk_sel_mask; + + for (i = 0; i < clk->pclk_sel->pclk_count; i++) { + if (clk->pclk_sel->pclk_info[i].pclk_mask == mask) + info = &clk->pclk_sel->pclk_info[i]; + } + spin_unlock_irqrestore(&clocks_lock, flags); + + return info; +} + +/* + * Set pclk as cclk's parent and add clock sibling node to current parents + * children list + */ +static void change_parent(struct clk *cclk, struct clk *pclk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + list_del(&cclk->sibling); + list_add(&cclk->sibling, &pclk->children); + + cclk->pclk = pclk; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * calculates current programmed rate of pll1 + * + * In normal mode + * rate = (2 * M[15:8] * Fin)/(N * 2^P) + * + * In Dithered mode + * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) + */ +void pll1_clk_recalc(struct clk *clk) +{ + struct pll_clk_config *config = clk->private_data; + unsigned int num = 2, den = 0, val, mode = 0; + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) & + PLL_MODE_MASK; + + val = readl(config->cfg_reg); + /* calculate denominator */ + den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK; + den = 1 << den; + den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK; + + /* calculate numerator & denominator */ + if (!mode) { + /* Normal mode */ + num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK; + } else { + /* Dithered mode */ + num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK; + den *= 256; + } + + clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* calculates current programmed rate of ahb or apb bus */ +void bus_clk_recalc(struct clk *clk) +{ + struct bus_clk_config *config = clk->private_data; + unsigned int div; + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + div = ((readl(config->reg) >> config->shift) & config->mask) + 1; + clk->rate = (unsigned long)clk->pclk->rate / div; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * calculates current programmed rate of auxiliary synthesizers + * used by: UART, FIRDA + * + * Fout from synthesizer can be given from two equations: + * Fout1 = (Fin * X/Y)/2 + * Fout2 = Fin * X/Y + * + * Selection of eqn 1 or 2 is programmed in register + */ +void aux_clk_recalc(struct clk *clk) +{ + struct aux_clk_config *config = clk->private_data; + struct pclk_info *pclk_info = NULL; + unsigned int num = 1, den = 1, val, eqn; + unsigned long flags; + + /* get current programmed parent */ + pclk_info = pclk_info_get(clk); + if (!pclk_info) { + spin_lock_irqsave(&clocks_lock, flags); + clk->pclk = NULL; + clk->rate = 0; + spin_unlock_irqrestore(&clocks_lock, flags); + return; + } + + change_parent(clk, pclk_info->pclk); + + spin_lock_irqsave(&clocks_lock, flags); + if (pclk_info->scalable) { + val = readl(config->synth_reg); + + eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK; + if (eqn == AUX_EQ1_SEL) + den *= 2; + + /* calculate numerator */ + num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK; + + /* calculate denominator */ + den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK; + val = (((clk->pclk->rate/10000) * num) / den) * 10000; + } else + val = clk->pclk->rate; + + clk->rate = val; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * calculates current programmed rate of gpt synthesizers + * Fout from synthesizer can be given from below equations: + * Fout= Fin/((2 ^ (N+1)) * (M+1)) + */ +void gpt_clk_recalc(struct clk *clk) +{ + struct aux_clk_config *config = clk->private_data; + struct pclk_info *pclk_info = NULL; + unsigned int div = 1, val; + unsigned long flags; + + pclk_info = pclk_info_get(clk); + if (!pclk_info) { + spin_lock_irqsave(&clocks_lock, flags); + clk->pclk = NULL; + clk->rate = 0; + spin_unlock_irqrestore(&clocks_lock, flags); + return; + } + + change_parent(clk, pclk_info->pclk); + + spin_lock_irqsave(&clocks_lock, flags); + if (pclk_info->scalable) { + val = readl(config->synth_reg); + div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK; + div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1); + } + + clk->rate = (unsigned long)clk->pclk->rate / div; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * Used for clocks that always have same value as the parent clock divided by a + * fixed divisor + */ +void follow_parent(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + clk->rate = clk->pclk->rate; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/** + * recalc_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + */ +void recalc_root_clocks(void) +{ + propagate_rate(&root_clks); +} diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h new file mode 100644 index 00000000000..a2d0112fcaf --- /dev/null +++ b/arch/arm/plat-spear/include/plat/clkdev.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-spear/include/plat/clkdev.h + * + * Clock Dev framework definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_CLKDEV_H +#define __PLAT_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif /* __PLAT_CLKDEV_H */ diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h new file mode 100644 index 00000000000..298bafc0a52 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -0,0 +1,126 @@ +/* + * arch/arm/plat-spear/include/plat/clock.h + * + * Clock framework definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_CLOCK_H +#define __PLAT_CLOCK_H + +#include <linux/list.h> +#include <asm/clkdev.h> +#include <linux/types.h> + +/* clk structure flags */ +#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ +#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ + +/** + * struct clkops - clock operations + * @enable: pointer to clock enable function + * @disable: pointer to clock disable function + */ +struct clkops { + int (*enable) (struct clk *); + void (*disable) (struct clk *); +}; + +/** + * struct pclk_info - parents info + * @pclk: pointer to parent clk + * @pclk_mask: value to be written for selecting this parent + * @scalable: Is parent scalable (1 - YES, 0 - NO) + */ +struct pclk_info { + struct clk *pclk; + u8 pclk_mask; + u8 scalable; +}; + +/** + * struct pclk_sel - parents selection configuration + * @pclk_info: pointer to array of parent clock info + * @pclk_count: number of parents + * @pclk_sel_reg: register for selecting a parent + * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also) + */ +struct pclk_sel { + struct pclk_info *pclk_info; + u8 pclk_count; + unsigned int *pclk_sel_reg; + unsigned int pclk_sel_mask; +}; + +/** + * struct clk - clock structure + * @usage_count: num of users who enabled this clock + * @flags: flags for clock properties + * @rate: programmed clock rate in Hz + * @en_reg: clk enable/disable reg + * @en_reg_bit: clk enable/disable bit + * @ops: clk enable/disable ops - generic_clkops selected if NULL + * @recalc: pointer to clock rate recalculate function + * @pclk: current parent clk + * @pclk_sel: pointer to parent selection structure + * @pclk_sel_shift: register shift for selecting parent of this clock + * @children: list for childrens or this clock + * @sibling: node for list of clocks having same parents + * @private_data: clock specific private data + */ +struct clk { + unsigned int usage_count; + unsigned int flags; + unsigned long rate; + unsigned int *en_reg; + u8 en_reg_bit; + const struct clkops *ops; + void (*recalc) (struct clk *); + + struct clk *pclk; + struct pclk_sel *pclk_sel; + unsigned int pclk_sel_shift; + + struct list_head children; + struct list_head sibling; + void *private_data; +}; + +/* pll configuration structure */ +struct pll_clk_config { + unsigned int *mode_reg; + unsigned int *cfg_reg; +}; + +/* ahb and apb bus configuration structure */ +struct bus_clk_config { + unsigned int *reg; + unsigned int mask; + unsigned int shift; +}; + +/* + * Aux clk configuration structure: applicable to GPT, UART and FIRDA + */ +struct aux_clk_config { + unsigned int *synth_reg; +}; + +/* platform specific clock functions */ +void clk_register(struct clk_lookup *cl); +void recalc_root_clocks(void); + +/* clock recalc functions */ +void follow_parent(struct clk *clk); +void pll1_clk_recalc(struct clk *clk); +void bus_clk_recalc(struct clk *clk); +void gpt_clk_recalc(struct clk *clk); +void aux_clk_recalc(struct clk *clk); + +#endif /* __PLAT_CLOCK_H */ diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S new file mode 100644 index 00000000000..1670734b7e5 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -0,0 +1,38 @@ +/* + * arch/arm/plat-spear/include/plat/debug-macro.S + * + * Debugging macro include header for spear platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/amba/serial.h> +#include <mach/spear.h> + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, =SPEAR_DBG_UART_BASE @ Physical base + movne \rx, =VA_SPEAR_DBG_UART_BASE @ Virtual base + .endm + + .macro senduart, rd, rx + strb \rd, [\rx, #UART01x_DR] @ ASC_TX_BUFFER + .endm + + .macro waituart, rd, rx +1001: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER + tst \rd, #UART01x_FR_TXFF @ TX_FULL + bne 1001b + .endm + + .macro busyuart, rd, rx +1002: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER + tst \rd, #UART011_FR_TXFE @ TX_EMPTY + beq 1002b + .endm diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h new file mode 100644 index 00000000000..b857c91257d --- /dev/null +++ b/arch/arm/plat-spear/include/plat/gpio.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-spear/include/plat/gpio.h + * + * GPIO macros for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_GPIO_H +#define __PLAT_GPIO_H + +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-spear/include/plat/io.h b/arch/arm/plat-spear/include/plat/io.h new file mode 100644 index 00000000000..4d4ba822b3e --- /dev/null +++ b/arch/arm/plat-spear/include/plat/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/plat-spear/include/plat/io.h + * + * IO definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_IO_H +#define __PLAT_IO_H + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif /* __PLAT_IO_H */ diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h new file mode 100644 index 00000000000..27a4aba7734 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/memory.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-spear/include/plat/memory.h + * + * Memory map for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_MEMORY_H +#define __PLAT_MEMORY_H + +/* Physical DRAM offset */ +#define PHYS_OFFSET UL(0x00000000) + +#endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h new file mode 100644 index 00000000000..877f3adcf61 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/padmux.h @@ -0,0 +1,92 @@ +/* + * arch/arm/plat-spear/include/plat/padmux.h + * + * SPEAr platform specific gpio pads muxing file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PADMUX_H +#define __PLAT_PADMUX_H + +#include <linux/types.h> + +/* + * struct pmx_reg: configuration structure for mode reg and mux reg + * + * offset: offset of mode reg + * mask: mask of mode reg + */ +struct pmx_reg { + u32 offset; + u32 mask; +}; + +/* + * struct pmx_dev_mode: configuration structure every group of modes of a device + * + * ids: all modes for this configuration + * mask: mask for supported mode + */ +struct pmx_dev_mode { + u32 ids; + u32 mask; +}; + +/* + * struct pmx_mode: mode definition structure + * + * name: mode name + * mask: mode mask + */ +struct pmx_mode { + char *name; + u32 id; + u32 mask; +}; + +/* + * struct pmx_dev: device definition structure + * + * name: device name + * modes: device configuration array for different modes supported + * mode_count: size of modes array + * is_active: is peripheral active/enabled + * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg + */ +struct pmx_dev { + char *name; + struct pmx_dev_mode *modes; + u8 mode_count; + bool is_active; + bool enb_on_reset; +}; + +/* + * struct pmx_driver: driver definition structure + * + * mode: mode to be set + * devs: array of pointer to pmx devices + * devs_count: ARRAY_SIZE of devs + * base: base address of soc config registers + * mode_reg: structure of mode config register + * mux_reg: structure of device mux config register + */ +struct pmx_driver { + struct pmx_mode *mode; + struct pmx_dev **devs; + u8 devs_count; + u32 *base; + struct pmx_reg mode_reg; + struct pmx_reg mux_reg; +}; + +/* pmx functions */ +int pmx_register(struct pmx_driver *driver); + +#endif /* __PLAT_PADMUX_H */ diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h new file mode 100644 index 00000000000..03ed8b585dc --- /dev/null +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -0,0 +1,73 @@ +/* + * arch/arm/plat-spear/include/plat/shirq.h + * + * SPEAr platform shared irq layer header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SHIRQ_H +#define __PLAT_SHIRQ_H + +#include <linux/irq.h> +#include <linux/types.h> + +/* + * struct shirq_dev_config: shared irq device configuration + * + * virq: virtual irq number of device + * enb_mask: enable mask of device + * status_mask: status mask of device + * clear_mask: clear mask of device + */ +struct shirq_dev_config { + u32 virq; + u32 enb_mask; + u32 status_mask; + u32 clear_mask; +}; + +/* + * struct shirq_regs: shared irq register configuration + * + * base: base address of shared irq register + * enb_reg: enable register offset + * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt + * status_reg: status register offset + * status_reg_mask: status register valid mask + * clear_reg: clear register offset + * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt + */ +struct shirq_regs { + void __iomem *base; + u32 enb_reg; + u32 reset_to_enb; + u32 status_reg; + u32 status_reg_mask; + u32 clear_reg; + u32 reset_to_clear; +}; + +/* + * struct spear_shirq: shared irq structure + * + * irq: hardware irq number + * dev_config: array of device config structures which are using "irq" line + * dev_count: size of dev_config array + * regs: register configuration for shared irq block + */ +struct spear_shirq { + u32 irq; + struct shirq_dev_config *dev_config; + u32 dev_count; + struct shirq_regs regs; +}; + +int spear_shirq_register(struct spear_shirq *shirq); + +#endif /* __PLAT_SHIRQ_H */ diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h new file mode 100644 index 00000000000..55a4e405d57 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/system.h @@ -0,0 +1,41 @@ +/* + * arch/arm/plat-spear/include/plat/system.h + * + * SPEAr platform specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SYSTEM_H +#define __PLAT_SYSTEM_H + +#include <asm/hardware/sp810.h> +#include <linux/io.h> +#include <mach/spear.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + if (mode == 's') { + /* software reset, Jump into ROM at address 0 */ + cpu_reset(0); + } else { + /* hardware reset, Use on-chip reset capability */ + sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); + } +} + +#endif /* __PLAT_SYSTEM_H */ diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h new file mode 100644 index 00000000000..914d09dd50f --- /dev/null +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/plat-spear/include/plat/timex.h + * + * SPEAr platform specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_TIMEX_H +#define __PLAT_TIMEX_H + +#define CLOCK_TICK_RATE 48000000 + +#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h new file mode 100644 index 00000000000..99ba6789cc9 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -0,0 +1,43 @@ +/* + * arch/arm/plat-spear/include/plat/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/amba/serial.h> +#include <mach/spear.h> + +#ifndef __PLAT_UNCOMPRESS_H +#define __PLAT_UNCOMPRESS_H +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; + + while (readl(base + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + + writel(c, base + UART01x_DR); +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif /* __PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h new file mode 100644 index 00000000000..09e9372aea2 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/vmalloc.h @@ -0,0 +1,19 @@ +/* + * arch/arm/plat-spear/include/plat/vmalloc.h + * + * Defining Vmalloc area for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_VMALLOC_H +#define __PLAT_VMALLOC_H + +#define VMALLOC_END 0xF0000000 + +#endif /* __PLAT_VMALLOC_H */ diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c new file mode 100644 index 00000000000..d2aab3adcde --- /dev/null +++ b/arch/arm/plat-spear/padmux.c @@ -0,0 +1,164 @@ +/* + * arch/arm/plat-spear/include/plat/padmux.c + * + * SPEAr platform specific gpio pads muxing source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <plat/padmux.h> + +/* + * struct pmx: pmx definition structure + * + * base: base address of configuration registers + * mode_reg: mode configurations + * mux_reg: muxing configurations + * active_mode: pointer to current active mode + */ +struct pmx { + u32 base; + struct pmx_reg mode_reg; + struct pmx_reg mux_reg; + struct pmx_mode *active_mode; +}; + +static struct pmx *pmx; + +/** + * pmx_mode_set - Enables an multiplexing mode + * @mode - pointer to pmx mode + * + * It will set mode of operation in hardware. + * Returns -ve on Err otherwise 0 + */ +static int pmx_mode_set(struct pmx_mode *mode) +{ + u32 val; + + if (!mode->name) + return -EFAULT; + + pmx->active_mode = mode; + + val = readl(pmx->base + pmx->mode_reg.offset); + val &= ~pmx->mode_reg.mask; + val |= mode->mask & pmx->mode_reg.mask; + writel(val, pmx->base + pmx->mode_reg.offset); + + return 0; +} + +/** + * pmx_devs_enable - Enables list of devices + * @devs - pointer to pmx device array + * @count - number of devices to enable + * + * It will enable pads for all required peripherals once and only once. + * If peripheral is not supported by current mode then request is rejected. + * Conflicts between peripherals are not handled and peripherals will be + * enabled in the order they are present in pmx_dev array. + * In case of conflicts last peripheral enalbed will be present. + * Returns -ve on Err otherwise 0 + */ +static int pmx_devs_enable(struct pmx_dev **devs, u8 count) +{ + u32 val, i, mask; + + if (!count) + return -EINVAL; + + val = readl(pmx->base + pmx->mux_reg.offset); + for (i = 0; i < count; i++) { + u8 j = 0; + + if (!devs[i]->name || !devs[i]->modes) { + printk(KERN_ERR "padmux: dev name or modes is null\n"); + continue; + } + /* check if peripheral exists in active mode */ + if (pmx->active_mode) { + bool found = false; + for (j = 0; j < devs[i]->mode_count; j++) { + if (devs[i]->modes[j].ids & + pmx->active_mode->id) { + found = true; + break; + } + } + if (found == false) { + printk(KERN_ERR "%s device not available in %s"\ + "mode\n", devs[i]->name, + pmx->active_mode->name); + continue; + } + } + + /* enable peripheral */ + mask = devs[i]->modes[j].mask & pmx->mux_reg.mask; + if (devs[i]->enb_on_reset) + val &= ~mask; + else + val |= mask; + + devs[i]->is_active = true; + } + writel(val, pmx->base + pmx->mux_reg.offset); + kfree(pmx); + + /* this will ensure that multiplexing can't be changed now */ + pmx = (struct pmx *)-1; + + return 0; +} + +/** + * pmx_register - registers a platform requesting pad mux feature + * @driver - pointer to driver structure containing driver specific parameters + * + * Also this must be called only once. This will allocate memory for pmx + * structure, will call pmx_mode_set, will call pmx_devs_enable. + * Returns -ve on Err otherwise 0 + */ +int pmx_register(struct pmx_driver *driver) +{ + int ret = 0; + + if (pmx) + return -EPERM; + if (!driver->base || !driver->devs) + return -EFAULT; + + pmx = kzalloc(sizeof(*pmx), GFP_KERNEL); + if (!pmx) + return -ENOMEM; + + pmx->base = (u32)driver->base; + pmx->mode_reg.offset = driver->mode_reg.offset; + pmx->mode_reg.mask = driver->mode_reg.mask; + pmx->mux_reg.offset = driver->mux_reg.offset; + pmx->mux_reg.mask = driver->mux_reg.mask; + + /* choose mode to enable */ + if (driver->mode) { + ret = pmx_mode_set(driver->mode); + if (ret) + goto pmx_fail; + } + ret = pmx_devs_enable(driver->devs, driver->devs_count); + if (ret) + goto pmx_fail; + + return 0; + +pmx_fail: + return ret; +} diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c new file mode 100644 index 00000000000..2172d6946ae --- /dev/null +++ b/arch/arm/plat-spear/shirq.c @@ -0,0 +1,118 @@ +/* + * arch/arm/plat-spear/shirq.c + * + * SPEAr platform shared irq layer source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <plat/shirq.h> + +struct spear_shirq *shirq; +static DEFINE_SPINLOCK(lock); + +static void shirq_irq_mask(unsigned irq) +{ + struct spear_shirq *shirq = get_irq_chip_data(irq); + u32 val, id = irq - shirq->dev_config[0].virq; + unsigned long flags; + + if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + return; + + spin_lock_irqsave(&lock, flags); + val = readl(shirq->regs.base + shirq->regs.enb_reg); + if (shirq->regs.reset_to_enb) + val |= shirq->dev_config[id].enb_mask; + else + val &= ~(shirq->dev_config[id].enb_mask); + writel(val, shirq->regs.base + shirq->regs.enb_reg); + spin_unlock_irqrestore(&lock, flags); +} + +static void shirq_irq_unmask(unsigned irq) +{ + struct spear_shirq *shirq = get_irq_chip_data(irq); + u32 val, id = irq - shirq->dev_config[0].virq; + unsigned long flags; + + if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + return; + + spin_lock_irqsave(&lock, flags); + val = readl(shirq->regs.base + shirq->regs.enb_reg); + if (shirq->regs.reset_to_enb) + val &= ~(shirq->dev_config[id].enb_mask); + else + val |= shirq->dev_config[id].enb_mask; + writel(val, shirq->regs.base + shirq->regs.enb_reg); + spin_unlock_irqrestore(&lock, flags); +} + +static struct irq_chip shirq_chip = { + .name = "spear_shirq", + .ack = shirq_irq_mask, + .mask = shirq_irq_mask, + .unmask = shirq_irq_unmask, +}; + +static void shirq_handler(unsigned irq, struct irq_desc *desc) +{ + u32 i, val, mask; + struct spear_shirq *shirq = get_irq_data(irq); + + desc->chip->ack(irq); + while ((val = readl(shirq->regs.base + shirq->regs.status_reg) & + shirq->regs.status_reg_mask)) { + for (i = 0; (i < shirq->dev_count) && val; i++) { + if (!(shirq->dev_config[i].status_mask & val)) + continue; + + generic_handle_irq(shirq->dev_config[i].virq); + + /* clear interrupt */ + val &= ~shirq->dev_config[i].status_mask; + if ((shirq->regs.clear_reg == -1) || + shirq->dev_config[i].clear_mask == -1) + continue; + mask = readl(shirq->regs.base + shirq->regs.clear_reg); + if (shirq->regs.reset_to_clear) + mask &= ~shirq->dev_config[i].clear_mask; + else + mask |= shirq->dev_config[i].clear_mask; + writel(mask, shirq->regs.base + shirq->regs.clear_reg); + } + } + desc->chip->unmask(irq); +} + +int spear_shirq_register(struct spear_shirq *shirq) +{ + int i; + + if (!shirq || !shirq->dev_config || !shirq->regs.base) + return -EFAULT; + + if (!shirq->dev_count) + return -EINVAL; + + set_irq_chained_handler(shirq->irq, shirq_handler); + for (i = 0; i < shirq->dev_count; i++) { + set_irq_chip(shirq->dev_config[i].virq, &shirq_chip); + set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq); + set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID); + set_irq_chip_data(shirq->dev_config[i].virq, shirq); + } + + set_irq_data(shirq->irq, shirq); + return 0; +} diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c new file mode 100644 index 00000000000..a1025d38f38 --- /dev/null +++ b/arch/arm/plat-spear/time.c @@ -0,0 +1,292 @@ +/* + * arch/arm/plat-spear/time.c + * + * Copyright (C) 2009 ST Microelectronics + * Shiraz Hashim<shiraz.hashim@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/irq.h> +#include <asm/mach/time.h> +#include <mach/irqs.h> +#include <mach/hardware.h> +#include <mach/spear.h> +#include <mach/generic.h> + +/* + * We would use TIMER0 and TIMER1 as clockevent and clocksource. + * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further + * they share same functional clock. Any change in one's functional clock will + * also affect other timer. + */ + +#define CLKEVT 0 /* gpt0, channel0 as clockevent */ +#define CLKSRC 1 /* gpt0, channel1 as clocksource */ + +/* Register offsets, x is channel number */ +#define CR(x) ((x) * 0x80 + 0x80) +#define IR(x) ((x) * 0x80 + 0x84) +#define LOAD(x) ((x) * 0x80 + 0x88) +#define COUNT(x) ((x) * 0x80 + 0x8C) + +/* Reg bit definitions */ +#define CTRL_INT_ENABLE 0x0100 +#define CTRL_ENABLE 0x0020 +#define CTRL_ONE_SHOT 0x0010 + +#define CTRL_PRESCALER1 0x0 +#define CTRL_PRESCALER2 0x1 +#define CTRL_PRESCALER4 0x2 +#define CTRL_PRESCALER8 0x3 +#define CTRL_PRESCALER16 0x4 +#define CTRL_PRESCALER32 0x5 +#define CTRL_PRESCALER64 0x6 +#define CTRL_PRESCALER128 0x7 +#define CTRL_PRESCALER256 0x8 + +#define INT_STATUS 0x1 + +static __iomem void *gpt_base; +static struct clk *gpt_clk; + +static void clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk_event_dev); +static int clockevent_next_event(unsigned long evt, + struct clock_event_device *clk_event_dev); + +/* + * Following clocksource_set_clock and clockevent_set_clock picked + * from arch/mips/kernel/time.c + */ + +void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, clock); + if ((temp >> 32) == 0) + break; + } + cs->shift = shift; + cs->mult = (u32) temp; +} + +void __init clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) clock << shift; + do_div(temp, NSEC_PER_SEC); + if ((temp >> 32) == 0) + break; + } + cd->shift = shift; + cd->mult = (u32) temp; +} + +static cycle_t clocksource_read_cycles(struct clocksource *cs) +{ + return (cycle_t) readw(gpt_base + COUNT(CLKSRC)); +} + +static struct clocksource clksrc = { + .name = "tmr1", + .rating = 200, /* its a pretty decent clock */ + .read = clocksource_read_cycles, + .mask = 0xFFFF, /* 16 bits */ + .mult = 0, /* to be computed */ + .shift = 0, /* to be computed */ + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void spear_clocksource_init(void) +{ + u32 tick_rate; + u16 val; + + /* program the prescaler (/256)*/ + writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC)); + + /* find out actual clock driving Timer */ + tick_rate = clk_get_rate(gpt_clk); + tick_rate >>= CTRL_PRESCALER256; + + writew(0xFFFF, gpt_base + LOAD(CLKSRC)); + + val = readw(gpt_base + CR(CLKSRC)); + val &= ~CTRL_ONE_SHOT; /* autoreload mode */ + val |= CTRL_ENABLE ; + writew(val, gpt_base + CR(CLKSRC)); + + clocksource_set_clock(&clksrc, tick_rate); + + /* register the clocksource */ + clocksource_register(&clksrc); +} + +static struct clock_event_device clkevt = { + .name = "tmr0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = clockevent_set_mode, + .set_next_event = clockevent_next_event, + .shift = 0, /* to be computed */ +}; + +static void clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk_event_dev) +{ + u32 period; + u16 val; + + /* stop the timer */ + val = readw(gpt_base + CR(CLKEVT)); + val &= ~CTRL_ENABLE; + writew(val, gpt_base + CR(CLKEVT)); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + period = clk_get_rate(gpt_clk) / HZ; + period >>= CTRL_PRESCALER16; + writew(period, gpt_base + LOAD(CLKEVT)); + + val = readw(gpt_base + CR(CLKEVT)); + val &= ~CTRL_ONE_SHOT; + val |= CTRL_ENABLE | CTRL_INT_ENABLE; + writew(val, gpt_base + CR(CLKEVT)); + + break; + case CLOCK_EVT_MODE_ONESHOT: + val = readw(gpt_base + CR(CLKEVT)); + val |= CTRL_ONE_SHOT; + writew(val, gpt_base + CR(CLKEVT)); + + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + + break; + default: + pr_err("Invalid mode requested\n"); + break; + } +} + +static int clockevent_next_event(unsigned long cycles, + struct clock_event_device *clk_event_dev) +{ + u16 val; + + writew(cycles, gpt_base + LOAD(CLKEVT)); + + val = readw(gpt_base + CR(CLKEVT)); + val |= CTRL_ENABLE | CTRL_INT_ENABLE; + writew(val, gpt_base + CR(CLKEVT)); + + return 0; +} + +static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clkevt; + + writew(INT_STATUS, gpt_base + IR(CLKEVT)); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction spear_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = spear_timer_interrupt +}; + +static void __init spear_clockevent_init(void) +{ + u32 tick_rate; + + /* program the prescaler */ + writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT)); + + tick_rate = clk_get_rate(gpt_clk); + tick_rate >>= CTRL_PRESCALER16; + + clockevent_set_clock(&clkevt, tick_rate); + + clkevt.max_delta_ns = clockevent_delta2ns(0xfff0, + &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt); + + clkevt.cpumask = cpumask_of(0); + + clockevents_register_device(&clkevt); + + setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq); +} + +void __init spear_setup_timer(void) +{ + struct clk *pll3_clk; + + if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) { + pr_err("%s:cannot get IO addr\n", __func__); + return; + } + + gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K); + if (!gpt_base) { + pr_err("%s:ioremap failed for gpt\n", __func__); + goto err_mem; + } + + gpt_clk = clk_get_sys("gpt0", NULL); + if (!gpt_clk) { + pr_err("%s:couldn't get clk for gpt\n", __func__); + goto err_iomap; + } + + pll3_clk = clk_get(NULL, "pll3_48m_clk"); + if (!pll3_clk) { + pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__); + goto err_iomap; + } + + clk_set_parent(gpt_clk, pll3_clk); + + spear_clockevent_init(); + spear_clocksource_init(); + + return; + +err_iomap: + iounmap(gpt_base); + +err_mem: + release_mem_region(SPEAR_GPT0_BASE, SZ_1K); +} + +struct sys_timer spear_sys_timer = { + .init = spear_setup_timer, +}; diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile new file mode 100644 index 00000000000..9b1a66816aa --- /dev/null +++ b/arch/arm/plat-versatile/Makefile @@ -0,0 +1,4 @@ +obj-y := clock.o +obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o +obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/plat-versatile/clock.c index 989ecf5f5c4..5c8b6564fdc 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/plat-versatile/clock.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-integrator/clock.c + * linux/arch/arm/plat-versatile/clock.c * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. @@ -14,7 +14,8 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/clkdev.h> +#include <asm/hardware/icst.h> + #include <mach/clkdev.h> int clk_enable(struct clk *clk) @@ -36,24 +37,38 @@ EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *clk, unsigned long rate) { - struct icst525_vco vco; - vco = icst525_khz_to_vco(clk->params, rate / 1000); - return icst525_khz(clk->params, vco) * 1000; + long ret = -EIO; + if (clk->ops && clk->ops->round) + ret = clk->ops->round(clk, rate); + return ret; } EXPORT_SYMBOL(clk_round_rate); int clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EIO; - - if (clk->setvco) { - struct icst525_vco vco; - - vco = icst525_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst525_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } + if (clk->ops && clk->ops->set) + ret = clk->ops->set(clk, rate); return ret; } EXPORT_SYMBOL(clk_set_rate); + +long icst_clk_round(struct clk *clk, unsigned long rate) +{ + struct icst_vco vco; + vco = icst_hz_to_vco(clk->params, rate); + return icst_hz(clk->params, vco); +} +EXPORT_SYMBOL(icst_clk_round); + +int icst_clk_set(struct clk *clk, unsigned long rate) +{ + struct icst_vco vco; + + vco = icst_hz_to_vco(clk->params, rate); + clk->rate = icst_hz(clk->params, vco); + clk->ops->setvco(clk, vco); + + return 0; +} +EXPORT_SYMBOL(icst_clk_set); diff --git a/arch/arm/plat-versatile/include/plat/clock.h b/arch/arm/plat-versatile/include/plat/clock.h new file mode 100644 index 00000000000..3cfb024ccd7 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clock.h @@ -0,0 +1,15 @@ +#ifndef PLAT_CLOCK_H +#define PLAT_CLOCK_H + +#include <asm/hardware/icst.h> + +struct clk_ops { + long (*round)(struct clk *, unsigned long); + int (*set)(struct clk *, unsigned long); + void (*setvco)(struct clk *, struct icst_vco); +}; + +int icst_clk_set(struct clk *, unsigned long); +long icst_clk_round(struct clk *, unsigned long); + +#endif diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/plat-versatile/include/plat/timer-sp.h new file mode 100644 index 00000000000..21e75e30d49 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/timer-sp.h @@ -0,0 +1,2 @@ +void sp804_clocksource_init(void __iomem *); +void sp804_clockevents_init(void __iomem *, unsigned int); diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c new file mode 100644 index 00000000000..9768cf7e83d --- /dev/null +++ b/arch/arm/plat-versatile/sched-clock.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/plat-versatile/sched-clock.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/cnt32_to_63.h> +#include <linux/io.h> +#include <asm/div64.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#ifdef VERSATILE_SYS_BASE +#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) +#endif + +#ifdef REALVIEW_SYS_BASE +#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) +#endif + +/* + * This is the Realview and Versatile sched_clock implementation. This + * has a resolution of 41.7ns, and a maximum value of about 35583 days. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 89 seconds between successive + * calls to this function. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(readl(REFCOUNTER)); + + /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ + v *= 125<<1; + do_div(v, 3<<1); + + return v; +} diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/plat-versatile/timer-sp.c new file mode 100644 index 00000000000..fb0d1c29971 --- /dev/null +++ b/arch/arm/plat-versatile/timer-sp.c @@ -0,0 +1,156 @@ +/* + * linux/arch/arm/plat-versatile/timer-sp.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/arm_timer.h> + +#include <plat/timer-sp.h> + +/* + * These timers are currently always setup to be clocked at 1MHz. + */ +#define TIMER_FREQ_KHZ (1000) +#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ) + +static void __iomem *clksrc_base; + +static cycle_t sp804_read(struct clocksource *cs) +{ + return ~readl(clksrc_base + TIMER_VALUE); +} + +static struct clocksource clocksource_sp804 = { + .name = "timer3", + .rating = 200, + .read = sp804_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init sp804_clocksource_init(void __iomem *base) +{ + struct clocksource *cs = &clocksource_sp804; + + clksrc_base = base; + + /* setup timer 0 as free-running clocksource */ + writel(0, clksrc_base + TIMER_CTRL); + writel(0xffffffff, clksrc_base + TIMER_LOAD); + writel(0xffffffff, clksrc_base + TIMER_VALUE); + writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, + clksrc_base + TIMER_CTRL); + + cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift); + clocksource_register(cs); +} + + +static void __iomem *clkevt_base; + +/* + * IRQ handler for the timer + */ +static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void sp804_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE; + + writel(ctrl, clkevt_base + TIMER_CTRL); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl |= TIMER_CTRL_ONESHOT; + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } + + writel(ctrl, clkevt_base + TIMER_CTRL); +} + +static int sp804_set_next_event(unsigned long next, + struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device sp804_clockevent = { + .name = "timer0", + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sp804_set_mode, + .set_next_event = sp804_set_next_event, + .rating = 300, + .cpumask = cpu_all_mask, +}; + +static struct irqaction sp804_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sp804_timer_interrupt, + .dev_id = &sp804_clockevent, +}; + +void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq) +{ + struct clock_event_device *evt = &sp804_clockevent; + + clkevt_base = base; + + evt->irq = timer_irq; + evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt); + evt->min_delta_ns = clockevent_delta2ns(0xf, evt); + + setup_irq(timer_irq, &sp804_timer_irq); + clockevents_register_device(evt); +} diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9c6170cd9aa..87ab0568bb0 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -564,7 +564,7 @@ config I2C_STU300 config I2C_VERSATILE tristate "ARM Versatile/Realview I2C bus support" - depends on ARCH_VERSATILE || ARCH_REALVIEW + depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS select I2C_ALGOBIT help Say yes if you want to support the I2C serial bus on ARMs Versatile diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 84c103a7ee1..ff115d92088 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -55,14 +55,16 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) host->cclk = host->mclk / (2 * (clk + 1)); } if (host->hw_designer == AMBA_VENDOR_ST) - clk |= MCI_FCEN; /* Bug fix in ST IP block */ + clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; /* This hasn't proven to be worthwhile */ /* clk |= MCI_CLK_PWRSAVE; */ } if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) - clk |= MCI_WIDE_BUS; + clk |= MCI_4BIT_BUS; + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) + clk |= MCI_ST_8BIT_BUS; writel(clk, host->base + MMCICLOCK); } @@ -629,7 +631,18 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc->ops = &mmci_ops; mmc->f_min = (host->mclk + 511) / 512; - mmc->f_max = min(host->mclk, fmax); + /* + * If the platform data supplies a maximum operating + * frequency, this takes precedence. Else, we fall back + * to using the module parameter, which has a (low) + * default value in case it is not specified. Either + * value must not exceed the clock rate into the block, + * of course. + */ + if (plat->f_max) + mmc->f_max = min(host->mclk, plat->f_max); + else + mmc->f_max = min(host->mclk, fmax); dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); #ifdef CONFIG_REGULATOR diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 1ceb9a90f59..d77062e5e3a 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -25,9 +25,11 @@ #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) -#define MCI_WIDE_BUS (1 << 11) +#define MCI_4BIT_BUS (1 << 11) +/* 8bit wide buses supported in ST Micro versions */ +#define MCI_ST_8BIT_BUS (1 << 12) /* HW flow control on the ST Micro version */ -#define MCI_FCEN (1 << 13) +#define MCI_ST_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 6b4241748dd..7e466fe7202 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,8 +6,29 @@ #include <linux/mmc/host.h> +/** + * struct mmci_platform_data - platform configuration for the MMCI + * (also known as PL180) block. + * @f_max: the maximum operational frequency for this host in this + * platform configuration. When this is specified it takes precedence + * over the module parameter for the same frequency. + * @ocr_mask: available voltages on the 4 pins from the block, this + * is ignored if a regulator is used, see the MMC_VDD_* masks in + * mmc/host.h + * @translate_vdd: a callback function to translate a MMC_VDD_* + * mask into a value to be binary or:ed and written into the + * MMCIPWR register of the block + * @status: if no GPIO read function was given to the block in + * gpio_wp (below) this function will be called to determine + * whether a card is present in the MMC slot or not + * @gpio_wp: read this GPIO pin to see if the card is write protected + * @gpio_cd: read this GPIO pin to detect card insertion + * @capabilities: the capabilities of the block as implemented in + * this platform, signify anything MMC_CAP_* from mmc/host.h + */ struct mmci_platform_data { - unsigned int ocr_mask; /* available voltages */ + unsigned int f_max; + unsigned int ocr_mask; u32 (*translate_vdd)(struct device *, unsigned int); unsigned int (*status)(struct device *); int gpio_wp; |