aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-picolcd43
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-prodikeys29
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-roccat-kone111
-rw-r--r--drivers/hid/Kconfig79
-rw-r--r--drivers/hid/Makefile3
-rw-r--r--drivers/hid/hid-core.c4
-rw-r--r--drivers/hid/hid-ids.h8
-rw-r--r--drivers/hid/hid-ntrig.c526
-rw-r--r--drivers/hid/hid-picolcd.c2631
-rw-r--r--drivers/hid/hid-prodikeys.c910
-rw-r--r--drivers/hid/hid-roccat-kone.c994
-rw-r--r--drivers/hid/hid-roccat-kone.h224
-rw-r--r--drivers/hid/usbhid/hid-core.c1
13 files changed, 5554 insertions, 9 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 00000000000..08579e7e1e8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date: March 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Make it possible to switch the PicoLCD device between LCD
+ (firmware) and bootloader (flasher) operation modes.
+
+ Reading: returns list of available modes, the active mode being
+ enclosed in brackets ('[' and ']')
+
+ Writing: causes operation mode switch. Permitted values are
+ the non-active mode names listed when read.
+
+ Note: when switching mode the current PicoLCD HID device gets
+ disconnected and reconnects after above delay (see attribute
+ operation_mode_delay for its value).
+
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date: April 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Delay PicoLCD waits before restarting in new mode when
+ operation_mode has changed.
+
+ Reading/Writing: It is expressed in ms and permitted range is
+ 0..30000ms.
+
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date: March 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Make it possible to adjust defio refresh rate.
+
+ Reading: returns list of available refresh rates (expressed in Hz),
+ the active refresh rate being enclosed in brackets ('[' and ']')
+
+ Writing: accepts new refresh rate expressed in integer Hz
+ within permitted rates.
+
+ Note: As device can barely do 2 complete refreshes a second
+ it only makes sense to adjust this value if only one or two
+ tiles get changed and it's not appropriate to expect the application
+ to flush it's tiny changes explicitely at higher than default rate.
+
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 00000000000..05d988c29a8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What: /sys/bus/hid/drivers/prodikeys/.../channel
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Allows control (via software) the midi channel to which
+ that the pc-midi keyboard will output.midi data.
+ Range: 0..15
+ Type: Read/write
+What: /sys/bus/hid/drivers/prodikeys/.../sustain
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Allows control (via software) the sustain duration of a
+ note held by the pc-midi driver.
+ 0 means sustain mode is disabled.
+ Range: 0..5000 (milliseconds)
+ Type: Read/write
+What: /sys/bus/hid/drivers/prodikeys/.../octave
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Controls the octave shift modifier in the pc-midi driver.
+ The octave can be shifted via software up/down 2 octaves.
+ 0 means the no ocatve shift.
+ Range: -2..2 (minus 2 to plus 2)
+ Type: Read/Write
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 00000000000..88340a23ce9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,111 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: It is possible to switch the dpi setting of the mouse with the
+ press of a button.
+ When read, this file returns the raw number of the actual dpi
+ setting reported by the mouse. This number has to be further
+ processed to receive the real dpi value.
+
+ VALUE DPI
+ 1 800
+ 2 1200
+ 3 1600
+ 4 2000
+ 5 2400
+ 6 3200
+
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the number of the actual profile.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 138 means 1.38
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the driver version.
+ The format of the string is "v<major>.<minor>.<patchlevel>".
+ This attribute is used by the userland tools to find the sysfs-
+ paths of installed kone-mice and determine the capabilites of
+ the driver. Versions of this driver for old kernels replace
+ usbhid instead of generic-usb. The way to scan for this file
+ has been chosen to provide a consistent way for all supported
+ kernel versions.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile holds informations like button
+ mappings, sensitivity, the colors of the 5 leds and light
+ effects.
+ When read, these files return the respective profile. The
+ returned data is 975 bytes in size.
+ When written, this file lets one write the respective profile
+ data back to the mouse. The data has to be 975 bytes long.
+ The mouse will reject invalid data, whereas the profile number
+ stored in the profile doesn't need to fit the number of the
+ store.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the settings stored in the mouse.
+ The size of the data is 36 bytes and holds information like the
+ startup_profile, tcu state and calibration_data.
+ When written, this file lets write settings back to the mouse.
+ The data has to be 36 bytes long. The mouse will reject invalid
+ data.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1 to 5.
+ When read, this attribute returns the number of the profile
+ that's active when the mouse is powered on.
+ When written, this file sets the number of the startup profile
+ and the mouse activates this profile immediately.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse has a "Tracking Control Unit" which lets the user
+ calibrate the laser power to fit the mousepad surface.
+ When read, this file returns the current state of the TCU,
+ where 0 means off and 1 means on.
+ Writing 0 in this file will switch the TCU off.
+ Writing 1 in this file will start the calibration which takes
+ around 6 seconds to complete and activates the TCU.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can be equipped with one of four supplied weights
+ ranging from 5 to 20 grams which are recognized by the mouse
+ and its value can be read out. When read, this file returns the
+ raw value returned by the mouse which eases further processing
+ in other software.
+ The values map to the weights as follows:
+
+ VALUE WEIGHT
+ 0 none
+ 1 5g
+ 2 10g
+ 3 15g
+ 4 20g
+
+ This file is readonly.
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 4ea926a21bc..339c1eaa55a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -106,6 +106,21 @@ config HID_CHICONY
---help---
Support for Chicony Tactical pad.
+config HID_PRODIKEYS
+ tristate "Prodikeys PC-MIDI Keyboard support"
+ depends on USB_HID && SND
+ select SND_RAWMIDI
+ ---help---
+ Support for Prodikeys PC-MIDI Keyboard device support.
+ Say Y here to enable support for this device.
+ - Prodikeys PC-MIDI keyboard.
+ The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
+ input and one MIDI output. These MIDI jacks appear as
+ a sound "card" in the ALSA sound system.
+ Note: if you say N here, this device will still function as a basic
+ multimedia keyboard, but will lack support for the musical keyboard
+ and some additional multimedia keys.
+
config HID_CYPRESS
tristate "Cypress" if EMBEDDED
depends on USB_HID
@@ -274,12 +289,76 @@ config HID_PETALYNX
---help---
Support for Petalynx Maxter remote control.
+config HID_PICOLCD
+ tristate "PicoLCD (graphic version)"
+ depends on USB_HID
+ ---help---
+ This provides support for Minibox PicoLCD devices, currently
+ only the graphical ones are supported.
+
+ This includes support for the following device features:
+ - Keypad
+ - Switching between Firmware and Flash mode
+ - EEProm / Flash access (via debugfs)
+ Features selectively enabled:
+ - Framebuffer for monochrome 256x64 display
+ - Backlight control
+ - Contrast control
+ - General purpose outputs
+ Features that are not (yet) supported:
+ - IR
+
+config HID_PICOLCD_FB
+ bool "Framebuffer support" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=FB || FB=y
+ select FB_DEFERRED_IO
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
+ Provide access to PicoLCD's 256x64 monochrome display via a
+ frambuffer device.
+
+config HID_PICOLCD_BACKLIGHT
+ bool "Backlight control" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
+ ---help---
+ Provide access to PicoLCD's backlight control via backlight
+ class.
+
+config HID_PICOLCD_LCD
+ bool "Contrast control" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
+ ---help---
+ Provide access to PicoLCD's LCD contrast via lcd class.
+
+config HID_PICOLCD_LEDS
+ bool "GPO via leds class" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
+ ---help---
+ Provide access to PicoLCD's GPO pins via leds class.
+
config HID_QUANTA
tristate "Quanta Optical Touch"
depends on USB_HID
---help---
Support for Quanta Optical Touch dual-touch panels.
+config HID_ROCCAT_KONE
+ tristate "Roccat Kone Mouse support"
+ depends on USB_HID
+ ---help---
+ Support for Roccat Kone mouse.
+
config HID_SAMSUNG
tristate "Samsung" if EMBEDDED
depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 2e196c734d2..22e47eaeea3 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -43,9 +43,12 @@ obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
+obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o
obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
+obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
+obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index ef492d3d52e..e10e314d38c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1287,6 +1287,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
@@ -1326,6 +1327,8 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
@@ -1337,6 +1340,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 16c2f866821..9776896cc4f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -156,6 +156,9 @@
#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500
#define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff
+#define USB_VENDOR_ID_CREATIVELABS 0x041e
+#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801
+
#define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
@@ -354,6 +357,8 @@
#define USB_VENDOR_ID_MICROCHIP 0x04d8
#define USB_DEVICE_ID_PICKIT1 0x0032
#define USB_DEVICE_ID_PICKIT2 0x0033
+#define USB_DEVICE_ID_PICOLCD 0xc002
+#define USB_DEVICE_ID_PICOLCD_BOOTLOADER 0xf002
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
@@ -412,6 +417,9 @@
#define USB_VENDOR_ID_PRODIGE 0x05af
#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
+#define USB_VENDOR_ID_ROCCAT 0x1e7d
+#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index 4777bbfa1cc..b6b0caeeac5 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -24,6 +24,34 @@
#define NTRIG_DUPLICATE_USAGES 0x001
+static unsigned int min_width;
+module_param(min_width, uint, 0644);
+MODULE_PARM_DESC(min_width, "Minimum touch contact width to accept.");
+
+static unsigned int min_height;
+module_param(min_height, uint, 0644);
+MODULE_PARM_DESC(min_height, "Minimum touch contact height to accept.");
+
+static unsigned int activate_slack = 1;
+module_param(activate_slack, uint, 0644);
+MODULE_PARM_DESC(activate_slack, "Number of touch frames to ignore at "
+ "the start of touch input.");
+
+static unsigned int deactivate_slack = 4;
+module_param(deactivate_slack, uint, 0644);
+MODULE_PARM_DESC(deactivate_slack, "Number of empty frames to ignore before "
+ "deactivating touch.");
+
+static unsigned int activation_width = 64;
+module_param(activation_width, uint, 0644);
+MODULE_PARM_DESC(activation_width, "Width threshold to immediately start "
+ "processing touch events.");
+
+static unsigned int activation_height = 32;
+module_param(activation_height, uint, 0644);
+MODULE_PARM_DESC(activation_height, "Height threshold to immediately start "
+ "processing touch events.");
+
struct ntrig_data {
/* Incoming raw values for a single contact */
__u16 x, y, w, h;
@@ -37,6 +65,309 @@ struct ntrig_data {
__u8 mt_footer[4];
__u8 mt_foot_count;
+
+ /* The current activation state. */
+ __s8 act_state;
+
+ /* Empty frames to ignore before recognizing the end of activity */
+ __s8 deactivate_slack;
+
+ /* Frames to ignore before acknowledging the start of activity */
+ __s8 activate_slack;
+
+ /* Minimum size contact to accept */
+ __u16 min_width;
+ __u16 min_height;
+
+ /* Threshold to override activation slack */
+ __u16 activation_width;
+ __u16 activation_height;
+
+ __u16 sensor_logical_width;
+ __u16 sensor_logical_height;
+ __u16 sensor_physical_width;
+ __u16 sensor_physical_height;
+};
+
+
+static ssize_t show_phys_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_physical_width);
+}
+
+static DEVICE_ATTR(sensor_physical_width, S_IRUGO, show_phys_width, NULL);
+
+static ssize_t show_phys_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_physical_height);
+}
+
+static DEVICE_ATTR(sensor_physical_height, S_IRUGO, show_phys_height, NULL);
+
+static ssize_t show_log_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_logical_width);
+}
+
+static DEVICE_ATTR(sensor_logical_width, S_IRUGO, show_log_width, NULL);
+
+static ssize_t show_log_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_logical_height);
+}
+
+static DEVICE_ATTR(sensor_logical_height, S_IRUGO, show_log_height, NULL);
+
+static ssize_t show_min_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->min_width *
+ nd->sensor_physical_width /
+ nd->sensor_logical_width);
+}
+
+static ssize_t set_min_width(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_width)
+ return -EINVAL;
+
+ nd->min_width = val * nd->sensor_logical_width /
+ nd->sensor_physical_width;
+
+ return count;
+}
+
+static DEVICE_ATTR(min_width, S_IWUSR | S_IRUGO, show_min_width, set_min_width);
+
+static ssize_t show_min_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->min_height *
+ nd->sensor_physical_height /
+ nd->sensor_logical_height);
+}
+
+static ssize_t set_min_height(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_height)
+ return -EINVAL;
+
+ nd->min_height = val * nd->sensor_logical_height /
+ nd->sensor_physical_height;
+
+ return count;
+}
+
+static DEVICE_ATTR(min_height, S_IWUSR | S_IRUGO, show_min_height,
+ set_min_height);
+
+static ssize_t show_activate_slack(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->activate_slack);
+}
+
+static ssize_t set_activate_slack(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > 0x7f)
+ return -EINVAL;
+
+ nd->activate_slack = val;
+
+ return count;
+}
+
+static DEVICE_ATTR(activate_slack, S_IWUSR | S_IRUGO, show_activate_slack,
+ set_activate_slack);
+
+static ssize_t show_activation_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->activation_width *
+ nd->sensor_physical_width /
+ nd->sensor_logical_width);
+}
+
+static ssize_t set_activation_width(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_width)
+ return -EINVAL;
+
+ nd->activation_width = val * nd->sensor_logical_width /
+ nd->sensor_physical_width;
+
+ return count;
+}
+
+static DEVICE_ATTR(activation_width, S_IWUSR | S_IRUGO, show_activation_width,
+ set_activation_width);
+
+static ssize_t show_activation_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->activation_height *
+ nd->sensor_physical_height /
+ nd->sensor_logical_height);
+}
+
+static ssize_t set_activation_height(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_height)
+ return -EINVAL;
+
+ nd->activation_height = val * nd->sensor_logical_height /
+ nd->sensor_physical_height;
+
+ return count;
+}
+
+static DEVICE_ATTR(activation_height, S_IWUSR | S_IRUGO,
+ show_activation_height, set_activation_height);
+
+static ssize_t show_deactivate_slack(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", -nd->deactivate_slack);
+}
+
+static ssize_t set_deactivate_slack(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ /*
+ * No more than 8 terminal frames have been observed so far
+ * and higher slack is highly likely to leave the single
+ * touch emulation stuck down.
+ */
+ if (val > 7)
+ return -EINVAL;
+
+ nd->deactivate_slack = -val;
+
+ return count;
+}
+
+static DEVICE_ATTR(deactivate_slack, S_IWUSR | S_IRUGO, show_deactivate_slack,
+ set_deactivate_slack);
+
+static struct attribute *sysfs_attrs[] = {
+ &dev_attr_sensor_physical_width.attr,
+ &dev_attr_sensor_physical_height.attr,
+ &dev_attr_sensor_logical_width.attr,
+ &dev_attr_sensor_logical_height.attr,
+ &dev_attr_min_height.attr,
+ &dev_attr_min_width.attr,
+ &dev_attr_activate_slack.attr,
+ &dev_attr_activation_width.attr,
+ &dev_attr_activation_height.attr,
+ &dev_attr_deactivate_slack.attr,
+ NULL
+};
+
+static struct attribute_group ntrig_attribute_group = {
+ .attrs = sysfs_attrs
};
/*
@@ -49,6 +380,8 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
/* No special mappings needed for the pen and single touch */
if (field->physical)
return 0;
@@ -62,6 +395,21 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
+
+ if (!nd->sensor_logical_width) {
+ nd->sensor_logical_width =
+ field->logical_maximum -
+ field->logical_minimum;
+ nd->sensor_physical_width =
+ field->physical_maximum -
+ field->physical_minimum;
+ nd->activation_width = activation_width *
+ nd->sensor_logical_width /
+ nd->sensor_physical_width;
+ nd->min_width = min_width *
+ nd->sensor_logical_width /
+ nd->sensor_physical_width;
+ }
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
@@ -69,6 +417,21 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
+
+ if (!nd->sensor_logical_height) {
+ nd->sensor_logical_height =
+ field->logical_maximum -
+ field->logical_minimum;
+ nd->sensor_physical_height =
+ field->physical_maximum -
+ field->physical_minimum;
+ nd->activation_height = activation_height *
+ nd->sensor_logical_height /
+ nd->sensor_physical_height;
+ nd->min_height = min_height *
+ nd->sensor_logical_height /
+ nd->sensor_physical_height;
+ }
return 1;
}
return 0;
@@ -201,20 +564,68 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
if (nd->mt_foot_count != 4)
break;
- /* Pen activity signal, trigger end of touch. */
+ /* Pen activity signal. */
if (nd->mt_footer[2]) {
+ /*
+ * When the pen deactivates touch, we see a
+ * bogus frame with ContactCount > 0.
+ * We can
+ * save a bit of work by ensuring act_state < 0
+ * even if deactivation slack is turned off.
+ */
+ nd->act_state = deactivate_slack - 1;
nd->confidence = 0;
break;
}
- /* If the contact was invalid */
- if (!(nd->confidence && nd->mt_footer[0])
- || nd->w <= 250
- || nd->h <= 190) {
- nd->confidence = 0;
+ /*
+ * The first footer value indicates the presence of a
+ * finger.
+ */
+ if (nd->mt_footer[0]) {
+ /*
+ * We do not want to process contacts under
+ * the size threshold, but do not want to
+ * ignore them for activation state
+ */
+ if (nd->w < nd->min_width ||
+ nd->h < nd->min_height)
+ nd->confidence = 0;
+ } else
break;
+
+ if (nd->act_state > 0) {
+ /*
+ * Contact meets the activation size threshold
+ */
+ if (nd->w >= nd->activation_width &&
+ nd->h >= nd->activation_height) {
+ if (nd->id)
+ /*
+ * first contact, activate now
+ */
+ nd->act_state = 0;
+ else {
+ /*
+ * avoid corrupting this frame
+ * but ensure next frame will
+ * be active
+ */
+ nd->act_state = 1;
+ break;
+ }
+ } else
+ /*
+ * Defer adjusting the activation state
+ * until the end of the frame.
+ */
+ break;
}
+ /* Discarding this contact */
+ if (!nd->confidence)
+ break;
+
/* emit a normal (X, Y) for the first point only */
if (nd->id == 0) {
/*
@@ -227,8 +638,15 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
+
+ /* Emit MT events */
input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+
+ /*
+ * Translate from height and width to size
+ * and orientation.
+ */
if (nd->w > nd->h) {
input_event(input, EV_ABS,
ABS_MT_ORIENTATION, 1);
@@ -248,12 +666,88 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
break;
case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
- if (!nd->reading_mt)
+ if (!nd->reading_mt) /* Just to be sure */
break;
nd->reading_mt = 0;
- if (nd->first_contact_touch) {
+
+ /*
+ * Activation state machine logic:
+ *
+ * Fundamental states:
+ * state > 0: Inactive
+ * state <= 0: Active
+ * state < -deactivate_slack:
+ * Pen termination of touch
+ *
+ * Specific values of interest
+ * state == activate_slack
+ * no valid input since the last reset
+ *
+ * state == 0
+ * general operational state
+ *
+ * state == -deactivate_slack
+ * read sufficient empty frames to accept
+ * the end of input and reset
+ */
+
+ if (nd->act_state > 0) { /* Currently inactive */
+ if (value)
+ /*
+ * Consider each live contact as
+ * evidence of intentional activity.
+ */
+ nd->act_state = (nd->act_state > value)
+ ? nd->act_state - value
+ : 0;
+ else
+ /*
+ * Empty frame before we hit the
+ * activity threshold, reset.
+ */
+ nd->act_state = nd->activate_slack;
+
+ /*
+ * Entered this block inactive and no
+ * coordinates sent this frame, so hold off
+ * on button state.
+ */
+ break;
+ } else { /* Currently active */
+ if (value && nd->act_state >=
+ nd->deactivate_slack)
+ /*
+ * Live point: clear accumulated
+ * deactivation count.
+ */
+ nd->act_state = 0;
+ else if (nd->act_state <= nd->deactivate_slack)
+ /*
+ * We've consumed the deactivation
+ * slack, time to deactivate and reset.
+ */
+ nd->act_state =
+ nd->activate_slack;
+ else { /* Move towards deactivation */
+ nd->act_state--;
+ break;
+ }
+ }
+
+ if (nd->first_contact_touch && nd->act_state <= 0) {
+ /*
+ * Check to see if we're ready to start
+ * emitting touch events.
+ *
+ * Note: activation slack will decrease over
+ * the course of the frame, and it will be
+ * inconsistent from the start to the end of
+ * the frame. However if the frame starts
+ * with slack, first_contact_touch will still
+ * be 0 and we will not get to this point.
+ */
input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
input_report_key(input, BTN_TOUCH, 1);
} else {
@@ -263,7 +757,7 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
break;
default:
- /* fallback to the generic hidinput handling */
+ /* fall-back to