17 files changed, 1857 insertions, 1 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ec77721507c..3df7cbd924a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
+source "arch/arm/mach-omap2/Kconfig"
+
 source "arch/arm/mach-s3c2410/Kconfig"
 
 source "arch/arm/mach-lh7a40x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 114cda7f1b7..81bd2193fe6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
+ machine-$(CONFIG_ARCH_OMAP2)	   := omap2
   incdir-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
new file mode 100644
index 00000000000..578880943cf
--- /dev/null
+++ b/arch/arm/mach-omap2/Kconfig
@@ -0,0 +1,22 @@
+comment "OMAP Core Type"
+	depends on ARCH_OMAP2
+
+config ARCH_OMAP24XX
+	bool "OMAP24xx Based System"
+	depends on ARCH_OMAP2
+
+config ARCH_OMAP2420
+	bool "OMAP2420 support"
+	depends on ARCH_OMAP24XX
+
+comment "OMAP Board Type"
+	depends on ARCH_OMAP2
+
+config MACH_OMAP_GENERIC
+	bool "Generic OMAP board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
+config MACH_OMAP_H4
+	bool "OMAP 2420 H4 board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
new file mode 100644
index 00000000000..42041166435
--- /dev/null
+++ b/arch/arm/mach-omap2/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o
+
+obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
+
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
new file mode 100644
index 00000000000..565aff7f37a
--- /dev/null
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -0,0 +1,3 @@
+  zreladdr-y		:= 0x80008000
+params_phys-y		:= 0x80000100
+initrd_phys-y		:= 0x80800000
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
new file mode 100644
index 00000000000..c602e7a3d93
--- /dev/null
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-generic.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * Code for generic OMAP2 board. Should work on many OMAP2 systems where
+ * the bootloader passes the board-specific data to the kernel.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config generic_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 0,
+		.wire4		= 0,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_board_config_kernel generic_config[] = {
+	{ OMAP_TAG_UART,	&generic_uart_config },
+	{ OMAP_TAG_MMC,		&generic_mmc_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
+	omap_serial_init();
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
+	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
new file mode 100644
index 00000000000..f2554469a76
--- /dev/null
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-h4.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+static struct mtd_partition h4_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data h4_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= h4_partitions,
+	.nr_parts	= ARRAY_SIZE(h4_partitions),
+};
+
+static struct resource h4_flash_resource = {
+	.start		= H4_CS0_BASE,
+	.end		= H4_CS0_BASE + SZ_64M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h4_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h4_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h4_flash_resource,
+};
+
+static struct resource h4_smc91x_resources[] = {
+	[0] = {
+		.start  = OMAP24XX_ETHR_START,          /* Physical */
+		.end    = OMAP24XX_ETHR_START + 0xf,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.end    = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device h4_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(h4_smc91x_resources),
+	.resource	= h4_smc91x_resources,
+};
+
+static struct platform_device *h4_devices[] __initdata = {
+	&h4_smc91x_device,
+	&h4_flash_device,
+};
+
+static inline void __init h4_init_smc91x(void)
+{
+	/* Make sure CS1 timings are correct */
+	GPMC_CONFIG1_1 = 0x00011200;
+	GPMC_CONFIG2_1 = 0x001f1f01;
+	GPMC_CONFIG3_1 = 0x00080803;
+	GPMC_CONFIG4_1 = 0x1c091c09;
+	GPMC_CONFIG5_1 = 0x041f1f1f;
+	GPMC_CONFIG6_1 = 0x000004c4;
+	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	udelay(100);
+
+	omap_cfg_reg(M15_24XX_GPIO92);
+	if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+			OMAP24XX_ETHR_GPIO_IRQ);
+		return;
+	}
+	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_h4_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_smc91x();
+}
+
+static struct omap_uart_config h4_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config h4_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled	= 1,
+		.wire4		= 1,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config h4_lcd_config __initdata = {
+	.panel_name	= "h4",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel h4_config[] = {
+	{ OMAP_TAG_UART,	&h4_uart_config },
+	{ OMAP_TAG_MMC,		&h4_mmc_config },
+	{ OMAP_TAG_LCD,		&h4_lcd_config },
+};
+
+static void __init omap_h4_init(void)
+{
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap_serial_init();
+}
+
+static void __init omap_h4_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
+	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_h4_map_io,
+	.init_irq	= omap_h4_init_irq,
+	.init_machine	= omap_h4_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
new file mode 100644
index 00000000000..7181edb8935
--- /dev/null
+++ b/arch/arm/mach-omap2/devices.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-omap2/devices.c
+ *
+ * OMAP2 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+extern void omap_nop_release(struct device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+#if 	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define OMAP2_I2C_BASE2		0x48072000
+#define OMAP2_I2C_INT2		57
+
+static struct resource i2c_resources2[] = {
+	{
+		.start		= OMAP2_I2C_BASE2,
+		.end		= OMAP2_I2C_BASE2 + 0x3f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP2_I2C_INT2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap_i2c_device2 = {
+        .name           = "i2c_omap",
+        .id             = 2,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+	.num_resources	= ARRAY_SIZE(i2c_resources2),
+	.resource	= i2c_resources2,
+};
+
+/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
+static void omap_init_i2c(void)
+{
+	/* REVISIT: Second I2C not in use on H4? */
+	if (machine_is_omap_h4())
+		return;
+
+	omap_cfg_reg(J15_24XX_I2C2_SCL);
+	omap_cfg_reg(H19_24XX_I2C2_SDA);
+	(void) platform_device_register(&omap_i2c_device2);
+}
+
+#else
+
+static void omap_init_i2c(void) {}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static int __init omap2_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	omap_init_i2c();
+
+	return 0;
+}
+arch_initcall(omap2_init_devices);
+
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
new file mode 100644
index 00000000000..76187300f2b
--- /dev/null
+++ b/arch/arm/mach-omap2/id.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/arm/mach-omap2/id.c
+ *
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define OMAP24XX_TAP_BASE	io_p2v(0x48014000)
+
+#define OMAP_TAP_IDCODE		0x0204
+#define OMAP_TAP_PROD_ID	0x0208
+
+#define OMAP_TAP_DIE_ID_0	0x0218
+#define OMAP_TAP_DIE_ID_1	0x021C
+#define OMAP_TAP_DIE_ID_2	0x0220
+#define OMAP_TAP_DIE_ID_3	0x0224
+
+/* system_rev fields for OMAP2 processors:
+ *   CPU id bits     [31:16],
+ *   CPU device type [15:12], (unprg,normal,POP)
+ *   CPU revision    [11:08]
+ *   CPU class bits  [07:00]
+ */
+
+struct omap_id {
+	u16	hawkeye;	/* Silicon type (Hawkeye id) */
+	u8	dev;		/* Device type from production_id reg */
+	u32	type;		/* combined type id copied to system_rev */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+	{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
+	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
+};
+
+static u32 __init read_tap_reg(int reg)
+{
+	return __raw_readl(OMAP24XX_TAP_BASE + reg);
+}
+
+void __init omap2_check_revision(void)
+{
+	int i, j;
+	u32 idcode;
+	u32 prod_id;
+	u16 hawkeye;
+	u8  dev_type;
+	u8  rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0x0f;
+	dev_type = (prod_id >> 16) & 0x0f;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+		idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_0));
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_1),
+	       (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_2));
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_3));
+	printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+		prod_id, dev_type);
+#endif
+
+	/* Check hawkeye ids */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (hawkeye == omap_ids[i].hawkeye)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(omap_ids)) {
+		printk(KERN_ERR "Unknown OMAP CPU id\n");
+		return;
+	}
+
+	for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
+		if (dev_type == omap_ids[j].dev)
+			break;
+	}
+
+	if (j == ARRAY_SIZE(omap_ids)) {
+		printk(KERN_ERR "Unknown OMAP device type. "
+				"Handling it as OMAP%04x\n",
+				omap_ids[i].type >> 16);
+		j = i;
+	}
+	system_rev = omap_ids[j].type;
+
+	system_rev |= rev << 8;
+
+	/* Add the cpu class info (24xx) */
+	system_rev |= 0x24;
+
+	pr_info("OMAP%04x", system_rev >> 16);
+	if ((system_rev >> 8) & 0x0f)
+		printk("%x", (system_rev >> 8) & 0x0f);
+	printk("\n");
+}
+
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
new file mode 100644
index 00000000000..8ea67bf196a
--- /dev/null
+++ b/arch/arm/mach-omap2/io.c
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/arm/mach-omap2/io.c
+ *
+ * OMAP2 I/O mapping code
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Juha Yrj�l� <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+
+extern void omap_sram_init(void);
+extern int omap2_clk_init(void);
+extern void omap2_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc omap2_io_desc[] __initdata = {
+	{
+		.virtual	= L3_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
+		.length		= L3_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
+		.length		= L4_24XX_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init omap_map_common_io(void)
+{
+	iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+	omap2_check_revision();
+	omap_sram_init();
+	omap2_mux_init();
+	omap2_clk_init();
+}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
new file mode 100644
index 00000000000..d7baff675cf
--- /dev/null
+++ b/arch/arm/mach-omap2/irq.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/irq.c
+ *
+ * Interrupt handler for OMAP2 boards.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <asm/hardware.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#define INTC_REVISION	0x0000
+#define INTC_SYSCONFIG	0x0010
+#define INTC_SYSSTATUS	0x0014
+#define INTC_CONTROL	0x0048
+#define INTC_MIR_CLEAR0	0x0088
+#define INTC_MIR_SET0	0x008c
+
+/*
+ * OMAP2 has a number of different interrupt controllers, each interrupt
+ * controller is identified as its own "bank". Register definitions are
+ * fairly consistent for each bank, but not all registers are implemented
+ * for each bank.. when in doubt, consult the TRM.
+ */
+static struct omap_irq_bank {
+	unsigned long base_reg;
+	unsigned int nr_irqs;
+} __attribute__ ((aligned(4))) irq_banks[] = {
+	{
+		/* MPU INTC */
+		.base_reg	= OMAP24XX_IC_BASE,
+		.nr_irqs	= 96,
+	}, {
+		/* XXX: DSP INTC */
+
+#if 0
+	/*
+	 * Commented out for now until we fix the IVA clocking
+	 */
+#ifdef CONFIG_ARCH_OMAP2420
+	}, {
+		/* IVA INTC (2420 only) */
+		.base_reg	= OMAP24XX_IVA_INTC_BASE,
+		.nr_irqs	= 16,	/* Actually 32, but only 16 are used */
+#endif
+#endif
+	}
+};
+
+/* XXX: FIQ and additional INTC support (only MPU at the moment) */
+static void omap_ack_irq(unsigned int irq)
+{
+	omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+}
+
+static void omap_mask_irq(unsigned int irq)
+{
+	int offset = (irq >> 5) << 5;
+
+	if (irq >= 64) {
+		irq %= 64;
+	} else if (irq >= 32) {
+		irq %= 32;
+	}
+
+	omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+}
+
+static void omap_unmask_irq(unsigned int irq)
+{
+	int offset = (irq >> 5) << 5;
+
+	if (irq >= 64) {
+		irq %= 64;
+	} else if (irq >= 32) {
+		irq %= 32;
+	}
+
+	omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+}
+
+static void omap_mask_ack_irq(unsigned int irq)
+{
+	omap_mask_irq(irq);
+	omap_ack_irq(irq);
+}
+
+static struct irqchip omap_irq_chip = {
+	.ack	= omap_mask_ack_irq,
+	.mask	= omap_mask_irq,
+	.unmask	= omap_unmask_irq,
+};
+
+static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
+{
+	unsigned long tmp;
+
+	tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff;
+	printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+			 "(revision %ld.%ld) with %d interrupts\n",
+			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+
+	tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG);
+	tmp |= 1 << 1;	/* soft reset */
+	omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+
+	while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+		/* Wait for reset to complete */;
+}
+
+void __init omap_init_irq(void)
+{
+	unsigned long nr_irqs = 0;
+	unsigned int nr_banks = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+
+		/* XXX */
+		if (!bank->base_reg)
+			continue;
+
+		omap_irq_bank_init_one(bank);
+
+		nr_irqs += bank->nr_irqs;
+		nr_banks++;
+	}
+
+	printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
+	       nr_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+
+	for (i = 0; i < nr_irqs; i++) {
+		set_irq_chip(i, &omap_irq_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
+
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
new file mode 100644
index 00000000000..ea4654815dd
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-omap2/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+/* NOTE: See mux.h for the enumeration */
+
+struct pin_config __initdata_or_module omap24xx_pins[] = {
+/*
+ *	description			mux	mux	pull	pull	debug
+ *					offset	mode	ena	type
+ */
+
+/* 24xx I2C */
+MUX_CFG_24XX("M19_24XX_I2C1_SCL",	0x111,	0,	0,	0,	1)
+MUX_CFG_24XX("L15_24XX_I2C1_SDA",	0x112,	0,	0,	0,	1)
+MUX_CFG_24XX("J15_24XX_I2C2_SCL",	0x113,	0,	0,	0,	1)
+MUX_CFG_24XX("H19_24XX_I2C2_SDA",	0x114,	0,	0,	0,	1)
+
+/* Menelaus interrupt */
+MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
+
+/* 24xx GPIO */
+MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
+MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
+
+};
+
+int __init omap2_mux_init(void)
+{
+	omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h
new file mode 100644
index 00000000000..2eb89b936c8
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm.h
@@ -0,0 +1,419 @@
+/*
+ * prcm.h - Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+/* SET_PERFORMANCE_LEVEL PARAMETERS */
+#define PRCM_HALF_SPEED 1
+#define PRCM_FULL_SPEED 2
+
+#ifndef __ASSEMBLER__
+
+#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
+
+#define PRCM_REVISION		PRCM_REG32(0x000)
+#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
+#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
+#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
+#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
+#define PRCM_VOLTST		PRCM_REG32(0x054)
+#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
+#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
+#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
+#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
+#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
+#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
+#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
+#define PRCM_POLCTRL		PRCM_REG32(0x098)
+
+/* GENERAL PURPOSE */
+#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
+#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
+#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
+#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
+#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
+#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
+#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
+#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
+#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
+#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
+#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
+#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
+#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
+#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
+#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
+#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
+#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
+#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
+#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
+#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
+
+/* MPU */
+#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
+#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
+#define RM_RSTST_MPU		PRCM_REG32(0x158)
+#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
+#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
+#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
+#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
+#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
+#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
+
+/* CORE */
+#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
+#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
+#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
+#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
+#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
+#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
+#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
+#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
+#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
+#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
+#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
+#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
+#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
+#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
+#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
+#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
+#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
+#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
+#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
+#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
+#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
+#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
+#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
+#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
+#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
+
+/* GFX */
+#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
+#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
+#define CM_IDLEST_GFX		PRCM_REG32(0x320)
+#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
+#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
+#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
+#define RM_RSTST_GFX		PRCM_REG32(0x358)
+#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
+#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
+#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
+
+/* WAKE-UP */
+#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
+#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
+#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
+#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
+#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
+#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
+#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
+#define RM_RSTST_WKUP		PRCM_REG32(0x458)
+#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
+#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
+
+/* CLOCKS */
+#define CM_CLKEN_PLL		PRCM_REG32(0x500)
+#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
+#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
+#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
+#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
+
+/* DSP */
+#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
+#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
+#define CM_IDLEST_DSP		PRCM_REG32(0x820)
+#define CM_AUTOIDLE_DSP