aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c3
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c3
-rw-r--r--arch/arm/plat-mxc/include/mach/i2c.h25
-rw-r--r--arch/arm/plat-s3c/dev-i2c0.c7
-rw-r--r--arch/arm/plat-s3c/dev-i2c1.c7
-rw-r--r--arch/arm/plat-s3c/include/plat/iic.h33
-rw-r--r--arch/powerpc/boot/dts/socrates.dts8
-rw-r--r--drivers/i2c/busses/Kconfig20
-rw-r--r--drivers/i2c/busses/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-imx.c624
-rw-r--r--drivers/i2c/busses/i2c-mpc.c322
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c77
-rw-r--r--drivers/i2c/busses/i2c-s6000.c407
-rw-r--r--drivers/i2c/busses/i2c-s6000.h79
-rw-r--r--include/linux/i2c/s6000.h10
16 files changed, 1504 insertions, 126 deletions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 01bd76725b9..4389c160f7d 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -409,8 +409,7 @@ static struct platform_device bast_sio = {
static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
- .bus_freq = 100*1000,
- .max_freq = 130*1000,
+ .frequency = 100*1000,
};
/* Asix AX88796 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 05a5e877b49..2b83f870771 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -340,8 +340,7 @@ static struct platform_device *n35_devices[] __initdata = {
static struct s3c2410_platform_i2c n30_i2ccfg = {
.flags = 0,
.slave_addr = 0x10,
- .bus_freq = 10*1000,
- .max_freq = 10*1000,
+ .frequency = 10*1000,
};
/* Lots of hardcoded stuff, but it sets up the hardware in a useful
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 72c266aee14..332bd3263ea 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -453,8 +453,7 @@ static struct spi_board_info __initdata jive_spi_devs[] = {
/* I2C bus and device configuration. */
static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
- .max_freq = 80 * 1000,
- .bus_freq = 50 * 1000,
+ .frequency = 80 * 1000,
.flags = S3C_IICFLG_FILTER,
.sda_delay = 2,
};
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
new file mode 100644
index 00000000000..4a5dc5c6d8e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -0,0 +1,25 @@
+/*
+ * i2c.h - i.MX I2C driver header file
+ *
+ * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __ASM_ARCH_I2C_H_
+#define __ASM_ARCH_I2C_H_
+
+/**
+ * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
+ * @init: Initialise gpio's and other board specific things
+ * @exit: Free everything initialised by @init
+ * @bitrate: Bus speed measured in Hz
+ *
+ **/
+struct imxi2c_platform_data {
+ int (*init)(struct device *dev);
+ void (*exit)(struct device *dev);
+ int bitrate;
+};
+
+#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index fe327074037..428372868fb 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c/dev-i2c0.c
*
- * Copyright 2008 Simtec Electronics
+ * Copyright 2008,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
@@ -50,9 +50,8 @@ struct platform_device s3c_device_i2c0 = {
static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
.flags = 0,
.slave_addr = 0x10,
- .bus_freq = 100*1000,
- .max_freq = 400*1000,
- .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+ .frequency = 100*1000,
+ .sda_delay = 100,
};
void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 2387fbf57af..8349c462788 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c/dev-i2c1.c
*
- * Copyright 2008 Simtec Electronics
+ * Copyright 2008,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
@@ -47,9 +47,8 @@ static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
.flags = 0,
.bus_num = 1,
.slave_addr = 0x10,
- .bus_freq = 100*1000,
- .max_freq = 400*1000,
- .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+ .frequency = 100*1000,
+ .sda_delay = 100,
};
void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index dc1dfcb9bc6..67450f11574 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/iic.h
+/* arch/arm/plat-s3c/include/plat/iic.h
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - I2C Controller platfrom_device info
+ * S3C - I2C Controller platform_device info
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,19 +15,24 @@
#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
-/* Notes:
- * 1) All frequencies are expressed in Hz
- * 2) A value of zero is `do not care`
-*/
-
+/**
+ * struct s3c2410_platform_i2c - Platform data for s3c I2C.
+ * @bus_num: The bus number to use (if possible).
+ * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
+ * @slave_addr: The I2C address for the slave device (if enabled).
+ * @frequency: The desired frequency in Hz of the bus. This is
+ * guaranteed to not be exceeded. If the caller does
+ * not care, use zero and the driver will select a
+ * useful default.
+ * @sda_delay: The delay (in ns) applied to SDA edges.
+ * @cfg_gpio: A callback to configure the pins for I2C operation.
+ */
struct s3c2410_platform_i2c {
- int bus_num; /* bus number to use */
+ int bus_num;
unsigned int flags;
- unsigned int slave_addr; /* slave address for controller */
- unsigned long bus_freq; /* standard bus frequency */
- unsigned long max_freq; /* max frequency for the bus */
- unsigned long min_freq; /* min frequency for the bus */
- unsigned int sda_delay; /* pclks (s3c2440 only) */
+ unsigned int slave_addr;
+ unsigned long frequency;
+ unsigned int sda_delay;
void (*cfg_gpio)(struct platform_device *dev);
};
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 04c398862e0..7a6ae75a1e5 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -79,11 +79,11 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
- compatible = "fsl-i2c";
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
- dfsrr;
+ fsl,preserve-clocking;
dtt@28 {
compatible = "winbond,w83782d";
@@ -111,11 +111,11 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- compatible = "fsl-i2c";
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
- dfsrr;
+ fsl,preserve-clocking;
};
enet0: ethernet@24000 {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index da809ad0996..94eae5c3cbc 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -356,6 +356,16 @@ config I2C_IBM_IIC
This driver can also be built as a module. If so, the module
will be called i2c-ibm_iic.
+config I2C_IMX
+ tristate "IMX I2C interface"
+ depends on ARCH_MXC
+ help
+ Say Y here if you want to use the IIC bus controller on
+ the Freescale i.MX/MXC processors.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-imx.
+
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
@@ -462,6 +472,16 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
+config I2C_S6000
+ tristate "S6000 I2C support"
+ depends on XTENSA_VARIANT_S6000
+ help
+ This driver supports the on chip I2C device on the
+ S6000 xtensa processor family.
+
+ To compile this driver as a module, choose M here. The module
+ will be called i2c-s6000.
+
config I2C_SH7760
tristate "Renesas SH7760 I2C Controller"
depends on CPU_SUBTYPE_SH7760
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 0c2c4b26cdf..776acb6403a 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
+obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
@@ -43,6 +44,7 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
+obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
new file mode 100644
index 00000000000..0b486a63460
--- /dev/null
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -0,0 +1,624 @@
+/*
+ * Copyright (C) 2002 Motorola GSG-China
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ *
+ * Author:
+ * Darius Augulis, Teltonika Inc.
+ *
+ * Desc.:
+ * Implementation of I2C Adapter/Algorithm Driver
+ * for I2C Bus integrated in Freescale i.MX/MXC processors
+ *
+ * Derived from Motorola GSG China I2C example driver
+ *
+ * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de
+ * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de
+ * Copyright (C) 2007 RightHand Technologies, Inc.
+ * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
+ *
+ */
+
+/** Includes *******************************************************************
+*******************************************************************************/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+
+/** Defines ********************************************************************
+*******************************************************************************/
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "imx-i2c"
+
+/* Default value */
+#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
+
+/* IMX I2C registers */
+#define IMX_I2C_IADR 0x00 /* i2c slave address */
+#define IMX_I2C_IFDR 0x04 /* i2c frequency divider */
+#define IMX_I2C_I2CR 0x08 /* i2c control */
+#define IMX_I2C_I2SR 0x0C /* i2c status */
+#define IMX_I2C_I2DR 0x10 /* i2c transfer data */
+
+/* Bits of IMX I2C registers */
+#define I2SR_RXAK 0x01
+#define I2SR_IIF 0x02
+#define I2SR_SRW 0x04
+#define I2SR_IAL 0x10
+#define I2SR_IBB 0x20
+#define I2SR_IAAS 0x40
+#define I2SR_ICF 0x80
+#define I2CR_RSTA 0x04
+#define I2CR_TXAK 0x08
+#define I2CR_MTX 0x10
+#define I2CR_MSTA 0x20
+#define I2CR_IIEN 0x40
+#define I2CR_IEN 0x80
+
+/** Variables ******************************************************************
+*******************************************************************************/
+
+/*
+ * sorted list of clock divider, register value pairs
+ * taken from table 26-5, p.26-9, Freescale i.MX
+ * Integrated Portable System Processor Reference Manual
+ * Document Number: MC9328MXLRM, Rev. 5.1, 06/2007
+ *
+ * Duplicated divider values removed from list
+ */
+
+static u16 __initdata i2c_clk_div[50][2] = {
+ { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
+ { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
+ { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
+ { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
+ { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
+ { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
+ { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
+ { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
+ { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
+ { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
+ { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
+ { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
+ { 3072, 0x1E }, { 3840, 0x1F }
+};
+
+struct imx_i2c_struct {
+ struct i2c_adapter adapter;
+ struct resource *res;
+ struct clk *clk;
+ void __iomem *base;
+ int irq;
+ wait_queue_head_t queue;
+ unsigned long i2csr;
+ unsigned int disable_delay;
+};
+
+/** Functions for IMX I2C adapter driver ***************************************
+*******************************************************************************/
+
+static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned long orig_jiffies = jiffies;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+ /* wait for bus not busy */
+ while (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_IBB) {
+ if (signal_pending(current)) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> I2C Interrupted\n", __func__);
+ return -EINTR;
+ }
+ if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> I2C bus is busy\n", __func__);
+ return -EIO;
+ }
+ schedule();
+ }
+
+ return 0;
+}
+
+static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
+{
+ int result;
+
+ result = wait_event_interruptible_timeout(i2c_imx->queue,
+ i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+
+ if (unlikely(result < 0)) {
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> result < 0\n", __func__);
+ return result;
+ } else if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
+ i2c_imx->i2csr = 0;
+ return 0;
+}
+
+static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
+{
+ if (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_RXAK) {
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
+ return -EIO; /* No ACK */
+ }
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
+ return 0;
+}
+
+static void i2c_imx_start(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned int temp = 0;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+ /* Enable I2C controller */
+ writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
+ /* Start I2C transaction */
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp |= I2CR_MSTA;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+}
+
+static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned int temp = 0;
+
+ /* Stop I2C transaction */
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp &= ~I2CR_MSTA;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ /* setup chip registers to defaults */
+ writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
+ writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+ /*
+ * This delay caused by an i.MXL hardware bug.
+ * If no (or too short) delay, no "STOP" bit will be generated.
+ */
+ udelay(i2c_imx->disable_delay);
+ /* Disable I2C controller */
+ writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+}
+
+static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
+ unsigned int rate)
+{
+ unsigned int i2c_clk_rate;
+ unsigned int div;
+ int i;
+
+ /* Divider value calculation */
+ i2c_clk_rate = clk_get_rate(i2c_imx->clk);
+ div = (i2c_clk_rate + rate - 1) / rate;
+ if (div < i2c_clk_div[0][0])
+ i = 0;
+ else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
+ i = ARRAY_SIZE(i2c_clk_div) - 1;
+ else
+ for (i = 0; i2c_clk_div[i][0] < div; i++);
+
+ /* Write divider value to register */
+ writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR);
+
+ /*
+ * There dummy delay is calculated.
+ * It should be about one I2C clock period long.
+ * This delay is used in I2C bus disable function
+ * to fix chip hardware bug.
+ */
+ i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
+ + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
+
+ /* dev_dbg() can't be used, because adapter is not yet registered */
+#ifdef CONFIG_I2C_DEBUG_BUS
+ printk(KERN_DEBUG "I2C: <%s> I2C_CLK=%d, REQ DIV=%d\n",
+ __func__, i2c_clk_rate, div);
+ printk(KERN_DEBUG "I2C: <%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
+ __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
+#endif
+}
+
+static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
+{
+ struct imx_i2c_struct *i2c_imx = dev_id;
+ unsigned int temp;
+
+ temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+ if (temp & I2SR_IIF) {
+ /* save status register */
+ i2c_imx->i2csr = temp;
+ temp &= ~I2SR_IIF;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
+ wake_up_interruptible(&i2c_imx->queue);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+ int i, result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
+ __func__, msgs->addr << 1);
+
+ /* write slave address */
+ writeb(msgs->addr << 1, i2c_imx->base + IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
+
+ /* write data */
+ for (i = 0; i < msgs->len; i++) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> write byte: B%d=0x%X\n",
+ __func__, i, msgs->buf[i]);
+ writeb(msgs->buf[i], i2c_imx->base + IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+ }
+ return 0;
+}
+
+static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+ int i, result;
+ unsigned int temp;
+
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> write slave address: addr=0x%x\n",
+ __func__, (msgs->addr << 1) | 0x01);
+
+ /* write slave address */
+ writeb((msgs->addr << 1) | 0x01, i2c_imx->base + IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
+
+ /* setup bus to read data */
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp &= ~I2CR_MTX;
+ if (msgs->len - 1)
+ temp &= ~I2CR_TXAK;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ readb(i2c_imx->base + IMX_I2C_I2DR); /* dummy read */
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
+
+ /* read data */
+ for (i = 0; i < msgs->len; i++) {
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ if (i == (msgs->len - 1)) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> clear MSTA\n", __func__);
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp &= ~I2CR_MSTA;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ } else if (i == (msgs->len - 2)) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> set TXAK\n", __func__);
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp |= I2CR_TXAK;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ }
+ msgs->buf[i] = readb(i2c_imx->base + IMX_I2C_I2DR);
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> read byte: B%d=0x%X\n",
+ __func__, i, msgs->buf[i]);
+ }
+ return 0;
+}
+
+static int i2c_imx_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ unsigned int i, temp;
+ int result;
+ struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+ /* Check if i2c bus is not busy */
+ result = i2c_imx_bus_busy(i2c_imx);
+ if (result)
+ goto fail0;
+
+ /* Start I2C transfer */
+ i2c_imx_start(i2c_imx);
+
+ /* read/write data */
+ for (i = 0; i < num; i++) {
+ if (i) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> repeated start\n", __func__);
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp |= I2CR_RSTA;
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ }
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> transfer message: %d\n", __func__, i);
+ /* write/read data */
+#ifdef CONFIG_I2C_DEBUG_BUS
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, "
+ "MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__,
+ (temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
+ (temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
+ (temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
+ temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, "
+ "IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__,
+ (temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0),
+ (temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0),
+ (temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
+ (temp & I2SR_RXAK ? 1 : 0));
+#endif
+ if (msgs[i].flags & I2C_M_RD)
+ result = i2c_imx_read(i2c_imx, &msgs[i]);
+ else
+ result = i2c_imx_write(i2c_imx, &msgs[i]);
+ }
+
+fail0:
+ /* Stop I2C transfer */
+ i2c_imx_stop(i2c_imx);
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
+ (result < 0) ? "error" : "success msg",
+ (result < 0) ? result : num);
+ return (result < 0) ? result : num;
+}
+
+static u32 i2c_imx_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm i2c_imx_algo = {
+ .master_xfer = i2c_imx_xfer,
+ .functionality = i2c_imx_func,
+};
+
+static int __init i2c_imx_probe(struct platform_device *pdev)
+{
+ struct imx_i2c_struct *i2c_imx;
+ struct resource *res;
+ struct imxi2c_platform_data *pdata;
+ void __iomem *base;
+ resource_size_t res_size;
+ int irq;
+ int ret;
+
+ dev_dbg(&pdev->dev, "<%s>\n", __func__);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't get device resources\n");
+ return -ENOENT;
+ }
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "can't get irq number\n");
+ return -ENOENT;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ if (pdata && pdata->init) {
+ ret = pdata->init(&pdev->dev);
+ if (ret)
+ return ret;
+ }
+
+ res_size = resource_size(res);
+ base = ioremap(res->start, res_size);
+ if (!base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -EIO;
+ goto fail0;
+ }
+
+ i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
+ if (!i2c_imx) {
+ dev_err(&pdev->dev, "can't allocate interface\n");
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
+ ret = -EBUSY;
+ goto fail2;
+ }
+
+ /* Setup i2c_imx driver structure */
+ strcpy(i2c_imx->adapter.name, pdev->name);
+ i2c_imx->adapter.owner = THIS_MODULE;
+ i2c_imx->adapter.algo = &i2c_imx_algo;
+ i2c_imx->adapter.dev.parent = &pdev->dev;
+ i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->irq = irq;
+ i2c_imx->base = base;
+ i2c_imx->res = res;
+
+ /* Get I2C clock */
+ i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
+ if (IS_ERR(i2c_imx->clk)) {
+ ret = PTR_ERR(i2c_imx->clk);
+ dev_err(&pdev->dev, "can't get I2C clock\n");
+ goto fail3;
+ }
+ clk_enable(i2c_imx->clk);
+
+ /* Request IRQ */
+ ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq);
+ goto fail4;
+ }
+
+ /* Init queue */
+ init_waitqueue_head(&i2c_imx->queue);
+
+ /* Set up adapter data */
+ i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
+
+ /* Set up clock divider */
+ if (pdata && pdata->bitrate)
+ i2c_imx_set_clk(i2c_imx, pdata->bitrate);
+ else
+ i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+
+ /* Set up chip registers to defaults */
+ writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+ writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+
+ /* Add I2C adapter */
+ ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "registration failed\n");
+ goto fail5;
+ }
+
+ /* Set up platform driver data */
+ platform_set_drvdata(pdev, i2c_imx);
+
+ dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq);
+ dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
+ i2c_imx->res->start, i2c_imx->res->end);
+ dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n",
+ res_size, i2c_imx->res->start);
+ dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
+ i2c_imx->adapter.name);
+ dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
+
+ return 0; /* Return OK */
+
+fail5:
+ free_irq(i2c_imx->irq, i2c_imx);
+fail4:
+ clk_disable(i2c_imx->clk);
+ clk_put(i2c_imx->clk);
+fail3:
+ release_mem_region(i2c_imx->res->start, resource_size(res));
+fail2:
+ kfree(i2c_imx);
+fail1:
+ iounmap(base);
+fail0:
+ if (pdata && pdata->exit)
+ pdata->exit(&pdev->dev);
+ return ret; /* Return error number */
+}
+
+static int __exit i2c_imx_remove(struct platform_device *pdev)
+{
+ struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
+ struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
+
+ /* remove adapter */
+ dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
+ i2c_del_adapter(&i2c_imx->adapter);
+ platform_set_drvdata(pdev, NULL);
+
+ /* free interrupt */
+ free_irq(i2c_imx->irq, i2c_imx);
+
+ /* setup chip registers to defaults */
+ writeb(0, i2c_imx->base + IMX_I2C_IADR);
+ writeb(0, i2c_imx->base + IMX_I2C_IFDR);
+ writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+ writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+
+ /* Shut down hardware */
+ if (pdata && pdata->exit)
+ pdata->exit(&pdev->dev);
+
+ /* Disable I2C clock */
+ clk_disable(i2c_imx->clk);
+ clk_put(i2c_imx->clk);
+
+ release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
+ iounmap(i2c_imx->base);
+ kfree(i2c_imx);
+ return 0;
+}
+
+static struct platform_driver i2c_imx_driver = {
+ .probe = i2c_imx_probe,
+ .remove = __exit_p(i2c_imx_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init i2c_adap_imx_init(void)
+{
+ return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe);
+}
+
+static void __exit i2c_adap_imx_exit(void)
+{
+ platform_driver_unregister(&i2c_imx_driver);
+}
+
+module_init(i2c_adap_imx_init);
+module_exit(i2c_adap_imx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Darius Augulis");
+MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 26bf3701058..4af5c09f0e8 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -20,18 +20,21 @@
#include <linux/of_platform.h>
#include <linux/of_i2c.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <asm/mpc52xx.h>
+#include <sysdev/fsl_soc.h>
+
#define DRV_NAME "mpc-i2c"
-#define MPC_I2C_FDR 0x04
-#define MPC_I2C_CR 0x08
-#define MPC_I2C_SR 0x0c
-#define MPC_I2C_DR 0x10
+#define MPC_I2C_FDR 0x04
+#define MPC_I2C_CR 0x08
+#define MPC_I2C_SR 0x0c
+#define MPC_I2C_DR 0x10
#define MPC_I2C_DFSRR 0x14
#define CCR_MEN 0x80
@@ -50,15 +53,27 @@
#define CSR_RXAK 0x01
struct mpc_i2c {
+ struct device *dev;
void __iomem *base;
u32 interrupt;
wait_queue_head_t queue;
struct i2c_adapter adap;
int irq;
- u32 flags;
};
-static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x)
+struct mpc_i2c_divider {
+ u16 divider;
+ u16 fdr; /* including dfsrr */
+};
+
+struct mpc_i2c_match_data {
+ void (*setclock)(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler);
+ u32 prescaler;
+};
+
+static inline void writeccr(struct mpc_i2c *i2c, u32 x)
{
writeb(x, i2c->base + MPC_I2C_CR);
}
@@ -100,12 +115,11 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
u32 x;
int result = 0;
- if (i2c->irq == NO_IRQ)
- {
+ if (i2c->irq == NO_IRQ) {
while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
schedule();
if (time_after(jiffies, orig_jiffies + timeout)) {
- pr_debug("I2C: timeout\n");
+ dev_dbg(i2c->dev, "timeout\n");
writeccr(i2c, 0);
result = -EIO;
break;
@@ -119,7 +133,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
(i2c->interrupt & CSR_MIF), timeout);
if (unlikely(!(i2c->interrupt & CSR_MIF))) {
- pr_debug("I2C: wait timeout\n");
+ dev_dbg(i2c->dev, "wait timeout\n");
writeccr(i2c, 0);
result = -ETIMEDOUT;
}
@@ -132,17 +146,17 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return result;
if (!(x & CSR_MCF)) {
- pr_debug("I2C: unfinished\n");
+ dev_dbg(i2c->dev, "unfinished\n");
return -EIO;
}
if (x & CSR_MAL) {
- pr_debug("I2C: MAL\n");
+ dev_dbg(i2c->dev, "MAL\n");
return -EIO;
}
if (writing && (x & CSR_RXAK)) {
- pr_debug("I2C: No RXAK\n");
+ dev_dbg(i2c->dev, "No RXAK\n");
/* generate stop */
writeccr(i2c, CCR_MEN);
return -EIO;
@@ -150,18 +164,181 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
-static void mpc_i2c_setclock(struct mpc_i2c *i2c)
+#ifdef CONFIG_PPC_52xx
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+ {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
+ {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
+ {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
+ {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
+ {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
+ {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
+ {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
+ {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
+ {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
+ {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
+ {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
+ {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
+ {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
+ {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
+ {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
+ {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
+ {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
+ {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
+};
+
+int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
+{
+ const struct mpc52xx_i2c_divider *div = NULL;
+ unsigned int pvr = mfspr(SPRN_PVR);
+ u32 divider;
+ int i;
+
+ if (!clock)
+ return -EINVAL;
+
+ /* Determine divider value */
+ divider = mpc52xx_find_ipb_freq(node) / clock;
+
+ /*
+ * We want to choose an FDR/DFSR that generates an I2C bus speed that
+ * is equal to or lower than the requested speed.
+ */
+ for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+ div = &mpc_i2c_dividers_52xx[i];
+ /* Old MPC5200 rev A CPUs do not support the high bits */
+ if (div->fdr & 0xc0 && pvr == 0x80822011)
+ continue;
+ if (div->divider >= divider)
+ break;
+ }
+
+ return div ? (int)div->fdr : -EINVAL;
+}
+
+static void mpc_i2c_setclock_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
- /* Set clock and filters */
- if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
- writeb(0x31, i2c->base + MPC_I2C_FDR);
- writeb(0x10, i2c->base + MPC_I2C_DFSRR);
- } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
- writeb(0x3f, i2c->base + MPC_I2C_FDR);
- else
- writel(0x1031, i2c->base + MPC_I2C_FDR);
+ int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+
+ if (fdr < 0)
+ fdr = 0x3f; /* backward compatibility */
+ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
+ dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+}
+#else /* !CONFIG_PPC_52xx */
+static void mpc_i2c_setclock_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_52xx*/
+
+#ifdef CONFIG_FSL_SOC
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+ {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
+ {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
+ {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
+ {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
+ {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
+ {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
+ {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
+ {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
+ {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
+ {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
+ {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
+ {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
+ {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
+ {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
+ {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
+ {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
+ {49152, 0x011e}, {61440, 0x011f}
+};
+
+u32 mpc_i2c_get_sec_cfg_8xxx(void)
+{
+ struct device_node *node = NULL;
+ u32 __iomem *reg;
+ u32 val = 0;
+
+ node = of_find_node_by_name(NULL, "global-utilities");
+ if (node) {
+ const u32 *prop = of_get_property(node, "reg", NULL);
+ if (prop) {
+ /*
+ * Map and check POR Device Status Register 2
+ * (PORDEVSR2) at 0xE0014
+ */
+ reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
+ if (!reg)
+ printk(KERN_ERR
+ "Error: couldn't map PORDEVSR2\n");
+ else
+ val = in_be32(reg) & 0x00000080; /* sec-cfg */
+ iounmap(reg);
+ }
+ }
+ if (node)
+ of_node_put(node);
+
+ return val;
}
+int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
+{
+ const struct mpc_i2c_divider *div = NULL;
+ u32 divider;
+ int i;
+
+ if (!clock)
+ return -EINVAL;
+
+ /* Determine proper divider value */
+ if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
+ prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
+ if (!prescaler)
+ prescaler = 1;
+
+ divider = fsl_get_sys_freq() / clock / prescaler;
+
+ pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
+ fsl_get_sys_freq(), clock, divider);
+
+ /*
+ * We want to choose an FDR/DFSR that generates an I2C bus speed that
+ * is equal to or lower than the requested speed.
+ */
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) {
+ div = &mpc_i2c_dividers_8xxx[i];
+ if (div->divider >= divider)
+ break;
+ }
+
+ return div ? (int)div->fdr : -EINVAL;
+}
+
+static void mpc_i2c_setclock_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+ int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+
+ if (fdr < 0)
+ fdr = 0x1031; /* backward compatibility */
+ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
+ writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
+ dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+ clock, fdr >> 8, fdr & 0xff);
+}
+
+#else /* !CONFIG_FSL_SOC */
+static void mpc_i2c_setclock_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_FSL_SOC */
+
static void mpc_i2c_start(struct mpc_i2c *i2c)
{
/* Clear arbitration */
@@ -176,7 +353,7 @@ static void mpc_i2c_stop(struct mpc_i2c *i2c)
}
static int mpc_write(struct mpc_i2c *i2c, int target,
- const u8 * data, int length, int restart)
+ const u8 *data, int length, int restart)
{
int i, result;
unsigned timeout = i2c->adap.timeout;
@@ -207,7 +384,7 @@ static int mpc_write(struct mpc_i2c *i2c, int target,
}
static int mpc_read(struct mpc_i2c *i2c, int target,
- u8 * data, int length, int restart)
+ u8 *data, int length, int restart)
{
unsigned timeout = i2c->adap.timeout;
int i, result;
@@ -264,12 +441,12 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
/* Allow bus up to 1s to become not busy */
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
if (signal_pending(current)) {
- pr_debug("I2C: Interrupted\n");
+ dev_dbg(i2c->dev, "Interrupted\n");
writeccr(i2c, 0);
return -EINTR;
}
if (time_after(jiffies, orig_jiffies + HZ)) {
- pr_debug("I2C: timeout\n");
+ dev_dbg(i2c->dev, "timeout\n");
if (readb(i2c->base + MPC_I2C_SR) ==
(CSR_MCF | CSR_MBB | CSR_RXAK))
mpc_i2c_fixup(i2c);
@@ -280,9 +457,10 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
for (i = 0; ret >= 0 && i < num; i++) {
pmsg = &msgs[i];
- pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, pmsg->addr, i + 1, num);
+ dev_dbg(i2c->dev,
+ "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+ pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret =
mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
@@ -311,27 +489,26 @@ static struct i2c_adapter mpc_ops = {
.timeout = HZ,
};
-static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit fsl_i2c_probe(struct of_device *op,
+ const struct of_device_id *match)
{
- int result = 0;
struct mpc_i2c *i2c;
+ const u32 *prop;
+ u32 clock = 0;
+ int result = 0;
+ int plen;
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
- if (of_get_property(op->node, "dfsrr", NULL))
- i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
-
- if (of_device_is_compatible(op->node, "fsl,mpc5200-i2c") ||
- of_device_is_compatible(op->node, "mpc5200-i2c"))
- i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
+ i2c->dev = &op->dev; /* for debug and error output */
init_waitqueue_head(&i2c->queue);
i2c->base = of_iomap(op->node, 0);
if (!i2c->base) {
- printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+ dev_err(i2c->dev, "failed to map controller\n");
result = -ENOMEM;
goto fail_map;
}
@@ -341,12 +518,27 @@ static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_
result = request_irq(i2c->irq, mpc_i2c_isr,
IRQF_SHARED, "i2c-mpc", i2c);
if (result < 0) {
- printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
+ dev_err(i2c->dev, "failed to attach interrupt\n");
goto fail_request;
}
}
-
- mpc_i2c_setclock(i2c);
+
+ if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+ prop = of_get_property(op->node, "clock-frequency", &plen);
+ if (prop && plen == sizeof(u32))
+ clock = *prop;
+
+ if (match->data) {
+ struct mpc_i2c_match_data *data =
+ (struct mpc_i2c_match_data *)match->data;
+ data->setclock(op->node, i2c, clock, data->prescaler);
+ } else {
+ /* Backwards compatibility */
+ if (of_get_property(op->node, "dfsrr", NULL))
+ mpc_i2c_setclock_8xxx(op->node, i2c,
+ clock, 0);
+ }
+ }
dev_set_drvdata(&op->dev, i2c);
@@ -356,7 +548,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_
result = i2c_add_adapter(&i2c->adap);
if (result < 0) {
- printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+ dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
of_register_i2c_devices(&i2c->adap, op->node);
@@ -368,7 +560,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_
free_irq(i2c->irq, i2c);
fail_request:
irq_dispose_mapping(i2c->irq);
- iounmap(i2c->base);
+ iounmap(i2c->base);
fail_map:
kfree(i2c);
return result;
@@ -391,9 +583,43 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
};
static const struct of_device_id mpc_i2c_of_match[] = {
- {.compatible = "fsl-i2c",},
+ {.compatible = "mpc5200-i2c",
+ .data = &(struct mpc_i2c_match_data) {
+ .setclock = mpc_i2c_setclock_52xx,
+ },
+ },
+ {.compatible = "fsl,mpc5200b-i2c",
+ .data = &(struct mpc_i2c_match_data) {
+ .setclock = mpc_i2c_setclock_52xx,
+ },
+ },
+ {.compatible = "fsl,mpc5200-i2c",
+ .data = &(struct mpc_i2c_match_data) {
+ .setclock = mpc_i2c_setclock_52xx,
+ },
+ },
+ {.compatible = "fsl,mpc8313-i2c",
+ .data = &(struct mpc_i2c_match_data) {
+ .setclock = mpc_i2c_setclock_8xxx,
+ },
+ },
+ {.compatible = "fsl,mpc8543-i2c",
+ .data = &(struct mpc_i2c_match_data) {
+ .setclock = mpc_i2c_setclock_8xxx,
+ .prescaler = 2,
+ },
+ },
+ {.compatible = "fsl,mpc8544-i2c",
+ .data = &(struct mpc_i2c_match_data) {
+ .setclock = mpc_i2c_setclock_8xxx,
+ .prescaler = 3,
+ },
+ /* Backward compatibility */
+ },
+ {.compatible = "fsl-i2c", },
{},
};
+
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
@@ -414,7 +640,7 @@ static int __init fsl_i2c_init(void)
rv = of_register_platform_driver(&mpc_i2c_driver);
if (rv)
- printk(KERN_ERR DRV_NAME
+ printk(KERN_ERR DRV_NAME
" of_register_platform_driver failed (%i)\n", rv);
return rv;
}
@@ -428,6 +654,6 @@ module_init(fsl_i2c_init);
module_exit(fsl_i2c_exit);
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
-MODULE_DESCRIPTION
- ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
+MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
+ "MPC824x/85xx/52xx processors");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5b7f95641ba..1691ef0f1ee 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1,6 +1,6 @@
/* linux/drivers/i2c/busses/i2c-s3c2410.c
*
- * Copyright (C) 2004,2005 Simtec Electronics
+ * Copyright (C) 2004,2005,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 I2C Controller
@@ -590,18 +590,6 @@ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
return clkin / (calc_divs * calc_div1);
}
-/* freq_acceptable
- *
- * test wether a frequency is within the acceptable range of error
-*/
-
-static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
-{
- int diff = freq - wanted;
-
- return diff >= -2 && diff <= 2;
-}
-
/* s3c24xx_i2c_clockrate
*
* work out a divisor for the user requested frequency setting,
@@ -614,44 +602,28 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
unsigned long clkin = clk_get_rate(i2c->clk);
unsigned int divs, div1;
+ unsigned long target_frequency;
u32 iiccon;
int freq;
- int start, end;
i2c->clkrate = clkin;
clkin /= 1000; /* clkin now in KHz */
- dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
- pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
-
- if (pdata->bus_freq != 0) {
- freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000,
- &div1, &divs);
- if (freq_acceptable(freq, pdata->bus_freq/1000))
- goto found;
- }
-
- /* ok, we may have to search for something suitable... */
+ dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
- start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq;
- end = pdata->min_freq;
+ target_frequency = pdata->frequency ? pdata->frequency : 100000;
- start /= 1000;
- end /= 1000;
+ target_frequency /= 1000; /* Target frequency now in KHz */
- /* search loop... */
+ freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
- for (; start > end; start--) {
- freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs);
- if (freq_acceptable(freq, start))
- goto found;
+ if (freq > target_frequency) {
+ dev_err(i2c->dev,
+ "Unable to achieve desired frequency %luKHz." \
+ " Lowest achievable %dKHz\n", target_frequency, freq);
+ return -EINVAL;
}
- /* cannot find frequency spec */
-
- return -EINVAL;
-
- found:
*got = freq;
iiccon = readl(i2c->regs + S3C2410_IICCON);
@@ -663,6 +635,23 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
writel(iiccon, i2c->regs + S3C2410_IICCON);
+ if (s3c24xx_i2c_is2440(i2c)) {
+ unsigned long sda_delay;
+
+ if (pdata->sda_delay) {
+ sda_delay = (freq / 1000) * pdata->sda_delay;
+ sda_delay /= 1000000;
+ sda_delay = DIV_ROUND_UP(sda_delay, 5);
+ if (sda_delay > 3)
+ sda_delay = 3;
+ sda_delay |= S3C2410_IICLC_FILTER_ON;
+ } else
+ sda_delay = 0;
+
+ dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
+ writel(sda_delay, i2c->regs + S3C2440_IICLC);
+ }
+
return 0;
}
@@ -769,11 +758,8 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
/* check for s3c2440 i2c controller */
- if (s3c24xx_i2c_is2440(i2c)) {
- dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay);
-
- writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC);
- }
+ if (s3c24xx_i2c_is2440(i2c))
+ writel(0x0, i2c->regs + S3C2440_IICLC);
return 0;
}
@@ -1018,14 +1004,13 @@ static int __init i2c_adap_s3c_init(void)
return ret;
}
+subsys_initcall(i2c_adap_s3c_init);
static void __exit i2c_adap_s3c_exit(void)
{
platform_driver_unregister(&s3c2410_i2c_driver);
platform_driver_unregister(&s3c2440_i2c_driver);
}
-
-module_init(i2c_adap_s3c_init);
module_exit(i2c_adap_s3c_exit);
MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
new file mode 100644
index 00000000000..c91359f4965
--- /dev/null
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -0,0 +1,407 @@
+/*
+ * drivers/i2c/busses/i2c-s6000.c
+ *
+ * Description: Driver for S6000 Family I2C Interface
+ * Copyright (c) 2008 emlix GmbH
+ * Author: Oskar Schirmer <os@emlix.com>
+ *
+ * Partially based on i2c-bfin-twi.c driver by <sonic.zhang@analog.com>
+ * Copyright (c) 2005-2007 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/s6000.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include "i2c-s6000.h"
+
+#define DRV_NAME "i2c-s6000"
+
+#define POLL_TIMEOUT (2 * HZ)
+
+struct s6i2c_if {
+ u8 __iomem *reg; /* memory mapped registers */
+ int irq;
+ spinlock_t lock;
+ struct i2c_msg *msgs; /* messages currently handled */
+ int msgs_num; /* nb of msgs to do */
+ int msgs_push; /* nb of msgs read/written */
+ int msgs_done; /* nb of msgs finally handled */
+ unsigned push; /* nb of bytes read/written in msg */
+ unsigned done; /* nb of bytes finally handled */
+ int timeout_count; /* timeout retries left */
+ struct timer_list timeout_timer;
+ struct i2c_adapter adap;
+ struct completion complete;
+ struct clk *clk;
+ struct resource *res;
+};
+
+static inline u16 i2c_rd16(struct s6i2c_if *iface, unsigned n)
+{
+ return readw(iface->reg + (n));
+}
+
+static inline void i2c_wr16(struct s6i2c_if *iface, unsigned n, u16 v)
+{
+ writew(v, iface->reg + (n));
+}
+
+static inline u32 i2c_rd32(struct s6i2c_if *iface, unsigned n)
+{
+ return readl(iface->reg + (n));
+}
+
+static inline void i2c_wr32(struct s6i2c_if *iface, unsigned n, u32 v)
+{
+ writel(v, iface->reg + (n));
+}
+
+static struct s6i2c_if s6i2c_if;
+
+static void s6i2c_handle_interrupt(struct s6i2c_if *iface)
+{
+ if (i2c_rd16(iface, S6_I2C_INTRSTAT) & (1 << S6_I2C_INTR_TXABRT)) {
+ i2c_rd16(iface, S6_I2C_CLRTXABRT);
+ i2c_wr16(iface, S6_I2C_INTRMASK, 0);
+ complete(&iface->complete);
+ return;
+ }
+ if (iface->msgs_done >= iface->msgs_num) {
+ dev_err(&iface->adap.dev, "s6i2c: spurious I2C irq: %04x\n",
+ i2c_rd16(iface, S6_I2C_INTRSTAT));
+ i2c_wr16(iface, S6_I2C_INTRMASK, 0);
+ return;
+ }
+ while ((iface->msgs_push < iface->msgs_num)
+ && (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_TFNF))) {
+ struct i2c_msg *m = &iface->msgs[iface->msgs_push];
+ if (!(m->flags & I2C_M_RD))
+ i2c_wr16(iface, S6_I2C_DATACMD, m->buf[iface->push]);
+ else
+ i2c_wr16(iface, S6_I2C_DATACMD,
+ 1 << S6_I2C_DATACMD_READ);
+ if (++iface->push >= m->len) {
+ iface->push = 0;
+ iface->msgs_push += 1;
+ }
+ }
+ do {
+ struct i2c_msg *m = &iface->msgs[iface->msgs_done];
+ if (!(m->flags & I2C_M_RD)) {
+ if (iface->msgs_done < iface->msgs_push)
+ iface->msgs_done += 1;
+ else
+ break;
+ } else if (i2c_rd16(iface, S6_I2C_STATUS)
+ & (1 << S6_I2C_STATUS_RFNE)) {
+ m->buf[iface->done] = i2c_rd16(iface, S6_I2C_DATACMD);
+ if (++iface->done >= m->len) {
+ iface->done = 0;
+ iface->msgs_done += 1;
+ }
+ } else{
+ break;
+ }
+ } while (iface->msgs_done < iface->msgs_num);
+ if (iface->msgs_done >= iface->msgs_num) {
+ i2c_wr16(iface, S6_I2C_INTRMASK, 1 << S6_I2C_INTR_TXABRT);
+ complete(&iface->complete);
+ } else if (iface->msgs_push >= iface->msgs_num) {
+ i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
+ (1 << S6_I2C_INTR_RXFULL));
+ } else {
+ i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
+ (1 << S6_I2C_INTR_TXEMPTY) |
+ (1 << S6_I2C_INTR_RXFULL));
+ }
+}
+
+static irqreturn_t s6i2c_interrupt_entry(int irq, void *dev_id)
+{
+ struct s6i2c_if *iface = dev_id;
+ if (!(i2c_rd16(iface, S6_I2C_STATUS) & ((1 << S6_I2C_INTR_RXUNDER)
+ | (1 << S6_I2C_INTR_RXOVER)
+ | (1 << S6_I2C_INTR_RXFULL)
+ | (1 << S6_I2C_INTR_TXOVER)
+ | (1 << S6_I2C_INTR_TXEMPTY)
+ | (1 << S6_I2C_INTR_RDREQ)
+ | (1 << S6_I2C_INTR_TXABRT)
+ | (1 << S6_I2C_INTR_RXDONE)
+ | (1 << S6_I2C_INTR_ACTIVITY)
+ | (1 << S6_I2C_INTR_STOPDET)
+ | (1 << S6_I2C_INTR_STARTDET)
+ | (1 << S6_I2C_INTR_GENCALL))))
+ return IRQ_NONE;
+
+ spin_lock(&iface->lock);
+ del_timer(&iface->timeout_timer);
+ s6i2c_handle_interrupt(iface);
+ spin_unlock(&iface->lock);
+ return IRQ_HANDLED;
+}
+
+static void s6i2c_timeout(unsigned long data)
+{
+ struct s6i2c_if *iface = (struct s6i2c_if *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iface->lock, flags);
+ s6i2c_handle_interrupt(iface);
+ if (--iface->timeout_count > 0) {
+ iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+ add_timer(&iface->timeout_timer);
+ } else {
+ complete(&iface->complete);
+ i2c_wr16(iface, S6_I2C_INTRMASK, 0);
+ }
+ spin_unlock_irqrestore(&iface->lock, flags);
+}
+
+static int s6i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct s6i2c_if *iface = adap->algo_data;
+ int i;
+ if (num == 0)
+ return 0;
+ if (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
+ yield();
+ i2c_wr16(iface, S6_I2C_INTRMASK, 0);
+ i2c_rd16(iface, S6_I2C_CLRINTR);
+ for (i = 0; i < num; i++) {
+ if (msgs[i].flags & I2C_M_TEN) {
+ dev_err(&adap->dev,
+ "s6i2c: 10 bits addr not supported\n");
+ return -EINVAL;
+ }
+ if (msgs[i].len == 0) {
+ dev_err(&adap->dev,
+ "s6i2c: zero length message not supported\n");
+ return -EINVAL;
+ }
+ if (msgs[i].addr != msgs[0].addr) {
+ dev_err(&adap->dev,
+ "s6i2c: multiple xfer cannot change target\n");
+ return -EINVAL;
+ }
+ }
+
+ iface->msgs = msgs;
+ iface->msgs_num = num;
+ iface->msgs_push = 0;
+ iface->msgs_done = 0;
+ iface->push = 0;
+ iface->done = 0;
+ iface->timeout_count = 10;
+ i2c_wr16(iface, S6_I2C_TAR, msgs[0].addr);
+ i2c_wr16(iface, S6_I2C_ENABLE, 1);
+ i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXEMPTY) |
+ (1 << S6_I2C_INTR_TXABRT));
+
+ iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+ add_timer(&iface->timeout_timer);
+ wait_for_completion(&iface->complete);
+ del_timer_sync(&iface->timeout_timer);
+ while (i2c_rd32(iface, S6_I2C_TXFLR) > 0)
+ schedule();
+ while (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
+ schedule();
+
+ i2c_wr16(iface, S6_I2C_INTRMASK, 0);
+ i2c_wr16(iface, S6_I2C_ENABLE, 0);
+ return iface->msgs_done;
+}
+
+static u32 s6i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm s6i2c_algorithm = {
+ .master_xfer = s6i2c_master_xfer,
+ .functionality = s6i2c_functionality,
+};
+
+static u16 __devinit nanoseconds_on_clk(struct s6i2c_if *iface, u32 ns)
+{
+ u32 dividend = ((clk_get_rate(iface->clk) / 1000) * ns) / 1000000;
+ if (dividend > 0xffff)
+ return 0xffff;
+ return dividend;
+}
+
+static int __devinit s6i2c_probe(struct platform_device *dev)
+{
+ struct s6i2c_if *iface = &s6i2c_if;
+ struct i2c_adapter *p_adap;
+ const char *clock;
+ int bus_num, rc;
+ spin_lock_init(&iface->lock);
+ init_completion(&iface->complete);
+ iface->irq = platform_get_irq(dev, 0);
+ if (iface->irq < 0) {
+ rc = iface->irq;
+ goto err_out;
+ }
+ iface->res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!iface->res) {
+ rc = -ENXIO;
+ goto err_out;
+ }
+ iface->res = request_mem_region(iface->res->start,
+ resource_size(iface->res),
+ dev->dev.bus_id);
+ if (!iface->res) {
+ rc = -EBUSY;
+ goto err_out;
+ }
+ iface->reg = ioremap_nocache(iface->res->start,
+ resource_size(iface->res));
+ if (!iface->reg) {
+ rc = -ENOMEM;
+ goto err_reg;
+ }
+
+ clock = 0;
+ bus_num = -1;
+ if (dev->dev.platform_data) {
+ struct s6_i2c_platform_data *pdata = dev->dev.platform_data;
+ bus_num = pdata->bus_num;
+ clock = pdata->clock;
+ }
+ iface->clk = clk_get(&dev->dev, clock);
+ if (IS_ERR(iface->clk)) {
+ rc = PTR_ERR(iface->clk);
+ goto err_map;
+ }
+ rc = clk_enable(iface->clk);
+ if (rc < 0)
+ goto err_clk_put;
+ init_timer(&iface->timeout_timer);
+ iface->timeout_timer.function = s6i2c_timeout;
+ iface->timeout_timer.data = (unsigned long)iface;
+
+ p_adap = &iface->adap;
+ strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
+ p_adap->algo = &s6i2c_algorithm;
+ p_adap->algo_data = iface;
+ p_adap->nr = bus_num;
+ p_adap->class = 0;
+ p_adap->dev.parent = &dev->dev;
+ i2c_wr16(iface, S6_I2C_INTRMASK, 0);
+ rc = request_irq(iface->irq, s6i2c_interrupt_entry,
+ IRQF_SHARED, dev->name, iface);
+ if (rc) {
+ dev_err(&p_adap->dev, "s6i2c: cant get IRQ %d\n", iface->irq);
+ goto err_clk_dis;
+ }
+
+ i2c_wr16(iface, S6_I2C_ENABLE, 0);
+ udelay(1);
+ i2c_wr32(iface, S6_I2C_SRESET, 1 << S6_I2C_SRESET_IC_SRST);
+ i2c_wr16(iface, S6_I2C_CLRTXABRT, 1);
+ i2c_wr16(iface, S6_I2C_CON,
+ (1 << S6_I2C_CON_MASTER) |
+ (S6_I2C_CON_SPEED_NORMAL << S6_I2C_CON_SPEED) |
+ (0 << S6_I2C_CON_10BITSLAVE) |
+ (0 << S6_I2C_CON_10BITMASTER) |
+ (1 << S6_I2C_CON_RESTARTENA) |
+ (1 << S6_I2C_CON_SLAVEDISABLE));
+ i2c_wr16(iface, S6_I2C_SSHCNT, nanoseconds_on_clk(iface, 4000));
+ i2c_wr16(iface, S6_I2C_SSLCNT, nanoseconds_on_clk(iface, 4700));
+ i2c_wr16(iface, S6_I2C_FSHCNT, nanoseconds_on_clk(iface, 600));
+ i2c_wr16(iface, S6_I2C_FSLCNT, nanoseconds_on_clk(iface, 1300));
+ i2c_wr16(iface, S6_I2C_RXTL, 0);
+ i2c_wr16(iface, S6_I2C_TXTL, 0);
+
+ platform_set_drvdata(dev, iface);
+ if (bus_num < 0)
+ rc = i2c_add_adapter(p_adap);
+ else
+ rc = i2c_add_numbered_adapter(p_adap);
+ if (rc)
+ goto err_irq_free;
+ return 0;
+
+err_irq_free:
+ free_irq(iface->irq, iface);
+err_clk_dis:
+ clk_disable(iface->clk);
+err_clk_put:
+ clk_put(iface->clk);
+err_map:
+ iounmap(iface->reg);
+err_reg:
+ release_mem_region(iface->res->start,
+ resource_size(iface->res));
+err_out:
+ return rc;
+}
+
+static int __devexit s6i2c_remove(struct platform_device *pdev)
+{
+ struct s6i2c_if *iface = platform_get_drvdata(pdev);
+ i2c_wr16(iface, S6_I2C_ENABLE, 0);
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&iface->adap);
+ free_irq(iface->irq, iface);
+ clk_disable(iface->clk);
+ clk_put(iface->clk);
+ iounmap(iface->reg);
+ release_mem_region(iface->res->start,
+ resource_size(iface->res));
+ return 0;
+}
+
+static struct platform_driver s6i2c_driver = {
+ .probe = s6i2c_probe,
+ .remove = __devexit_p(s6i2c_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s6i2c_init(void)
+{
+ pr_info("I2C: S6000 I2C driver\n");
+ return platform_driver_register(&s6i2c_driver);
+}
+
+static void __exit s6i2c_exit(void)
+{
+ platform_driver_unregister(&s6i2c_driver);
+}
+
+MODULE_DESCRIPTION("I2C-Bus adapter routines for S6000 I2C");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+subsys_initcall(s6i2c_init);
+module_exit(s6i2c_exit);
diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h
new file mode 100644
index 00000000000..ff23b81ded4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-s6000.h
@@ -0,0 +1,79 @@
+/*
+ * drivers/i2c/busses/i2c-s6000.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Emlix GmbH <info@emlix.com>
+ * Author: Oskar Schirmer <os@emlix.com>
+ */
+
+#ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H
+#define __DRIVERS_I2C_BUSSES_I2C_S6000_H
+
+#define S6_I2C_CON 0x000
+#define S6_I2C_CON_MASTER 0
+#define S6_I2C_CON_SPEED 1
+#define S6_I2C_CON_SPEED_NORMAL 1
+#define S6_I2C_CON_SPEED_FAST 2
+#define S6_I2C_CON_SPEED_MASK 3
+#define S6_I2C_CON_10BITSLAVE 3
+#define S6_I2C_CON_10BITMASTER 4
+#define S6_I2C_CON_RESTARTENA 5
+#define S6_I2C_CON_SLAVEDISABLE 6
+#define S6_I2C_TAR 0x004
+#define S6_I2C_TAR_GCORSTART 10
+#define S6_I2C_TAR_SPECIAL 11
+#define S6_I2C_SAR 0x008
+#define S6_I2C_HSMADDR 0x00C
+#define S6_I2C_DATACMD 0x010
+#define S6_I2C_DATACMD_READ 8
+#define S6_I2C_SSHCNT 0x014
+#define S6_I2C_SSLCNT 0x018
+#define S6_I2C_FSHCNT 0x01C
+#define S6_I2C_FSLCNT 0x020
+#define S6_I2C_INTRSTAT 0x02C
+#define S6_I2C_INTRMASK 0x030
+#define S6_I2C_RAWINTR 0x034
+#define S6_I2C_INTR_RXUNDER 0
+#define S6_I2C_INTR_RXOVER 1
+#define S6_I2C_INTR_RXFULL 2
+#define S6_I2C_INTR_TXOVER 3
+#define S6_I2C_INTR_TXEMPTY 4
+#define S6_I2C_INTR_RDREQ 5
+#define S6_I2C_INTR_TXABRT 6
+#define S6_I2C_INTR_RXDONE 7
+#define S6_I2C_INTR_ACTIVITY 8
+#define S6_I2C_INTR_STOPDET 9
+#define S6_I2C_INTR_STARTDET 10
+#define S6_I2C_INTR_GENCALL 11
+#define S6_I2C_RXTL 0x038
+#define S6_I2C_TXTL 0x03C
+#define S6_I2C_CLRINTR 0x040
+#define S6_I2C_CLRRXUNDER 0x044
+#define S6_I2C_CLRRXOVER 0x048
+#define S6_I2C_CLRTXOVER 0x04C
+#define S6_I2C_CLRRDREQ 0x050
+#define S6_I2C_CLRTXABRT 0x054
+#define S6_I2C_CLRRXDONE 0x058
+#define S6_I2C_CLRACTIVITY 0x05C
+#define S6_I2C_CLRSTOPDET 0x060
+#define S6_I2C_CLRSTARTDET 0x064
+#define S6_I2C_CLRGENCALL 0x068
+#define S6_I2C_ENABLE 0x06C
+#define S6_I2C_STATUS 0x070
+#define S6_I2C_STATUS_ACTIVITY 0
+#define S6_I2C_STATUS_TFNF 1
+#define S6_I2C_STATUS_TFE 2
+#define S6_I2C_STATUS_RFNE 3
+#define S6_I2C_STATUS_RFF 4
+#define S6_I2C_TXFLR 0x074
+#define S6_I2C_RXFLR 0x078
+#define S6_I2C_SRESET 0x07C
+#define S6_I2C_SRESET_IC_SRST 0
+#define S6_I2C_SRESET_IC_MASTER_SRST 1
+#define S6_I2C_SRESET_IC_SLAVE_SRST 2
+#define S6_I2C_TXABRTSOURCE 0x080
+
+#endif
diff --git a/include/linux/i2c/s6000.h b/include/linux/i2c/s6000.h
new file mode 100644
index 00000000000..d9b34bfdae7
--- /dev/null
+++ b/include/linux/i2c/s6000.h
@@ -0,0 +1,10 @@
+#ifndef __LINUX_I2C_S6000_H
+#define __LINUX_I2C_S6000_H
+
+struct s6_i2c_platform_data {
+ const char *clock; /* the clock to use */
+ int bus_num; /* the bus number to register */
+};
+
+#endif
+
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-16 18:45:38 +0000