diff options
74 files changed, 4502 insertions, 2864 deletions
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 0a85a7e8120..d9e5960dafd 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,4 +1,20 @@ +1 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> +2 Current Version : 00.00.03.01 +3 Older Version : 00.00.02.04 + +i. Added support for ZCR controller. + + New device id 0x413 added. + +ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW. + + Interrupt is enabled after required initialization is over. + This is done to ensure that driver is ready to handle interrupts when + it is generated by the controller. + + -Sumant Patro <Sumant.Patro@lsil.com> + 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 2 Current Version : 00.00.02.04 3 Older Version : 00.00.02.04 diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index b2c033edb03..34b0da5cfa0 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -437,159 +437,50 @@ iscsi_iser_session_create(struct iscsi_transport *iscsit, } static int -iscsi_iser_conn_set_param(struct iscsi_cls_conn *cls_conn, - enum iscsi_param param, uint32_t value) +iscsi_iser_set_param(struct iscsi_cls_conn *cls_conn, + enum iscsi_param param, char *buf, int buflen) { - struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_session *session = conn->session; - - spin_lock_bh(&session->lock); - if (conn->c_stage != ISCSI_CONN_INITIAL_STAGE && - conn->stop_stage != STOP_CONN_RECOVER) { - printk(KERN_ERR "iscsi_iser: can not change parameter [%d]\n", - param); - spin_unlock_bh(&session->lock); - return 0; - } - spin_unlock_bh(&session->lock); + int value; switch (param) { case ISCSI_PARAM_MAX_RECV_DLENGTH: /* TBD */ break; - case ISCSI_PARAM_MAX_XMIT_DLENGTH: - conn->max_xmit_dlength = value; - break; case ISCSI_PARAM_HDRDGST_EN: + sscanf(buf, "%d", &value); if (value) { printk(KERN_ERR "DataDigest wasn't negotiated to None"); return -EPROTO; } break; case ISCSI_PARAM_DATADGST_EN: + sscanf(buf, "%d", &value); if (value) { printk(KERN_ERR "DataDigest wasn't negotiated to None"); return -EPROTO; } break; - case ISCSI_PARAM_INITIAL_R2T_EN: - session->initial_r2t_en = value; - break; - case ISCSI_PARAM_IMM_DATA_EN: - session->imm_data_en = value; - break; - case ISCSI_PARAM_FIRST_BURST: - session->first_burst = value; - break; - case ISCSI_PARAM_MAX_BURST: - session->max_burst = value; - break; - case ISCSI_PARAM_PDU_INORDER_EN: - session->pdu_inorder_en = value; - break; - case ISCSI_PARAM_DATASEQ_INORDER_EN: - session->dataseq_inorder_en = value; - break; - case ISCSI_PARAM_ERL: - session->erl = value; - break; case ISCSI_PARAM_IFMARKER_EN: + sscanf(buf, "%d", &value); if (value) { printk(KERN_ERR "IFMarker wasn't negotiated to No"); return -EPROTO; } break; case ISCSI_PARAM_OFMARKER_EN: + sscanf(buf, "%d", &value); if (value) { printk(KERN_ERR "OFMarker wasn't negotiated to No"); return -EPROTO; } break; default: - break; - } - - return 0; -} - -static int -iscsi_iser_session_get_param(struct iscsi_cls_session *cls_session, - enum iscsi_param param, uint32_t *value) -{ - struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); - struct iscsi_session *session = iscsi_hostdata(shost->hostdata); - - switch (param) { - case ISCSI_PARAM_INITIAL_R2T_EN: - *value = session->initial_r2t_en; - break; - case ISCSI_PARAM_MAX_R2T: - *value = session->max_r2t; - break; - case ISCSI_PARAM_IMM_DATA_EN: - *value = session->imm_data_en; - break; - case ISCSI_PARAM_FIRST_BURST: - *value = session->first_burst; - break; - case ISCSI_PARAM_MAX_BURST: - *value = session->max_burst; - break; - case ISCSI_PARAM_PDU_INORDER_EN: - *value = session->pdu_inorder_en; - break; - case ISCSI_PARAM_DATASEQ_INORDER_EN: - *value = session->dataseq_inorder_en; - break; - case ISCSI_PARAM_ERL: - *value = session->erl; - break; - case ISCSI_PARAM_IFMARKER_EN: - *value = 0; - break; - case ISCSI_PARAM_OFMARKER_EN: - *value = 0; - break; - default: - return ISCSI_ERR_PARAM_NOT_FOUND; - } - - return 0; -} - -static int -iscsi_iser_conn_get_param(struct iscsi_cls_conn *cls_conn, - enum iscsi_param param, uint32_t *value) -{ - struct iscsi_conn *conn = cls_conn->dd_data; - - switch(param) { - case ISCSI_PARAM_MAX_RECV_DLENGTH: - *value = conn->max_recv_dlength; - break; - case ISCSI_PARAM_MAX_XMIT_DLENGTH: - *value = conn->max_xmit_dlength; - break; - case ISCSI_PARAM_HDRDGST_EN: - *value = 0; - break; - case ISCSI_PARAM_DATADGST_EN: - *value = 0; - break; - /*case ISCSI_PARAM_TARGET_RECV_DLENGTH: - *value = conn->target_recv_dlength; - break; - case ISCSI_PARAM_INITIATOR_RECV_DLENGTH: - *value = conn->initiator_recv_dlength; - break;*/ - default: - return ISCSI_ERR_PARAM_NOT_FOUND; + return iscsi_set_param(cls_conn, param, buf, buflen); } return 0; } - static void iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats) { @@ -701,7 +592,12 @@ static struct iscsi_transport iscsi_iser_transport = { ISCSI_FIRST_BURST | ISCSI_MAX_BURST | ISCSI_PDU_INORDER_EN | - ISCSI_DATASEQ_INORDER_EN, + ISCSI_DATASEQ_INORDER_EN | + ISCSI_EXP_STATSN | + ISCSI_PERSISTENT_PORT | + ISCSI_PERSISTENT_ADDRESS | + ISCSI_TARGET_NAME | + ISCSI_TPGT, .host_template = &iscsi_iser_sht, .conndata_size = sizeof(struct iscsi_conn), .max_lun = ISCSI_ISER_MAX_LUN, @@ -713,9 +609,9 @@ static struct iscsi_transport iscsi_iser_transport = { .create_conn = iscsi_iser_conn_create, .bind_conn = iscsi_iser_conn_bind, .destroy_conn = iscsi_iser_conn_destroy, - .set_param = iscsi_iser_conn_set_param, - .get_conn_param = iscsi_iser_conn_get_param, - .get_session_param = iscsi_iser_session_get_param, + .set_param = iscsi_iser_set_param, + .get_conn_param = iscsi_conn_get_param, + .get_session_param = iscsi_session_get_param, .start_conn = iscsi_iser_conn_start, .stop_conn = iscsi_conn_stop, /* these are called as part of conn recovery */ diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile index 51740b34622..b114236f439 100644 --- a/drivers/message/fusion/Makefile +++ b/drivers/message/fusion/Makefile @@ -33,6 +33,11 @@ # For mptfc: #CFLAGS_mptfc.o += -DMPT_DEBUG_FC +# For mptsas: +#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS +#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS_WIDE + + #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC obj-$(CONFIG_FUSION_SPI) += mptbase.o mptscsih.o mptspi.o diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h deleted file mode 100644 index dc98d46f907..00000000000 --- a/drivers/message/fusion/lsi/fc_log.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved. - * - * NAME: fc_log.h - * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips - * DESCRIPTION: Contains the enumerated list of values that may be returned - * in the IOCLogInfo field of a MPI Default Reply Message. - * - * CREATION DATE: 6/02/2000 - * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $ - */ - - -/* - * MpiIocLogInfo_t enum - * - * These 32 bit values are used in the IOCLogInfo field of the MPI reply - * messages. - * The value is 0xabcccccc where - * a = The type of log info as per the MPI spec. Since these codes are - * all for Fibre Channel this value will always be 2. - * b = Specifies a subclass of the firmware where - * 0 = FCP Initiator - * 1 = FCP Target - * 2 = LAN - * 3 = MPI Message Layer - * 4 = FC Link - * 5 = Context Manager - * 6 = Invalid Field Offset - * 7 = State Change Info - * all others are reserved for future use - * c = A specific value within the subclass. - * - * NOTE: Any new values should be added to the end of each subclass so that the - * codes remain consistent across firmware releases. - */ -typedef enum _MpiIocLogInfoFc -{ - MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, - MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ - MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ - MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ - MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ - - MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, - MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ - MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ - MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ - MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ - MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ - MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ - - MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, - MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ - MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ - MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ - MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ - - MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, - - MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, - MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ - MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ - MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ - MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ - - MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, - - MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ - MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, - - MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ - -} MpiIocLogInfoFc_t; diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h index 02cdc840a06..81ad77622da 100644 --- a/drivers/message/fusion/lsi/mpi.h +++ b/drivers/message/fusion/lsi/mpi.h @@ -6,7 +6,7 @@ * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * - * mpi.h Version: 01.05.10 + * mpi.h Version: 01.05.11 * * Version History * --------------- @@ -76,6 +76,7 @@ * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. + * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -106,7 +107,7 @@ /* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x0C) +#define MPI_HEADER_VERSION_UNIT (0x0D) #define MPI_HEADER_VERSION_DEV (0x00) #define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI_HEADER_VERSION_UNIT_SHIFT (8) diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h index b1becec27e1..47e13e360c1 100644 --- a/drivers/message/fusion/lsi/mpi_cnfg.h +++ b/drivers/message/fusion/lsi/mpi_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * - * mpi_cnfg.h Version: 01.05.11 + * mpi_cnfg.h Version: 01.05.12 * * Version History * --------------- @@ -266,6 +266,16 @@ * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. + * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. + * Added Manufacturing Page 7. + * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. + * Added IOC Page 6. + * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. + * Added MaxLBAHigh field to RAID Volume Page 0. + * Added Nvdata version fields to SAS IO Unit Page 0. + * Added AdditionalControlFlags, MaxTargetPortConnectTime, + * ReportDeviceMissingDelay, and IODeviceMissingDelay + * fields to SAS IO Unit Page 1. * -------------------------------------------------------------------------- */ @@ -631,9 +641,11 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; -#define MPI_MANUFACTURING4_PAGEVERSION (0x03) +#define MPI_MANUFACTURING4_PAGEVERSION (0x04) /* defines for the Flags field */ +#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80) +#define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x40) #define MPI_MANPAGE4_IME_DISABLE (0x20) #define MPI_MANPAGE4_IM_DISABLE (0x10) #define MPI_MANPAGE4_IS_DISABLE (0x08) @@ -668,6 +680,66 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6 #define MPI_MANUFACTURING6_PAGEVERSION (0x00) +typedef struct _MPI_MANPAGE7_CONNECTOR_INFO +{ + U32 Pinout; /* 00h */ + U8 Connector[16]; /* 04h */ + U8 Location; /* 14h */ + U8 Reserved1; /* 15h */ + U16 Slot; /* 16h */ + U32 Reserved2; /* 18h */ +} MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO, + MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t; + +/* defines for the Pinout field */ +#define MPI_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) +#define MPI_MANPAGE7_PINOUT_SFF_8482 (0x00000002) +#define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) + +/* defines for the Location field */ +#define MPI_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * on |