diff options
-rw-r--r-- | sound/drivers/mpu401/mpu401_uart.c | 108 |
1 files changed, 66 insertions, 42 deletions
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c index b49a45cbf67..cd64d3eb9ec 100644 --- a/sound/drivers/mpu401/mpu401_uart.c +++ b/sound/drivers/mpu401/mpu401_uart.c @@ -58,22 +58,26 @@ static void snd_mpu401_uart_output_write(struct snd_mpu401 * mpu); #define MPU401_ACK 0xfe /* Build in lowlevel io */ -static void mpu401_write_port(struct snd_mpu401 *mpu, unsigned char data, unsigned long addr) +static void mpu401_write_port(struct snd_mpu401 *mpu, unsigned char data, + unsigned long addr) { outb(data, addr); } -static unsigned char mpu401_read_port(struct snd_mpu401 *mpu, unsigned long addr) +static unsigned char mpu401_read_port(struct snd_mpu401 *mpu, + unsigned long addr) { return inb(addr); } -static void mpu401_write_mmio(struct snd_mpu401 *mpu, unsigned char data, unsigned long addr) +static void mpu401_write_mmio(struct snd_mpu401 *mpu, unsigned char data, + unsigned long addr) { writeb(data, (void __iomem *)addr); } -static unsigned char mpu401_read_mmio(struct snd_mpu401 *mpu, unsigned long addr) +static unsigned char mpu401_read_mmio(struct snd_mpu401 *mpu, + unsigned long addr) { return readb((void __iomem *)addr); } @@ -86,20 +90,22 @@ static void snd_mpu401_uart_clear_rx(struct snd_mpu401 *mpu) mpu->read(mpu, MPU401D(mpu)); #ifdef CONFIG_SND_DEBUG if (timeout <= 0) - snd_printk("cmd: clear rx timeout (status = 0x%x)\n", mpu->read(mpu, MPU401C(mpu))); + snd_printk(KERN_ERR "cmd: clear rx timeout (status = 0x%x)\n", + mpu->read(mpu, MPU401C(mpu))); #endif } static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu) { spin_lock(&mpu->input_lock); - if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode)) { + if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode)) snd_mpu401_uart_input_read(mpu); - } else { + else snd_mpu401_uart_clear_rx(mpu); - } spin_unlock(&mpu->input_lock); - /* ok. for better Tx performance try do some output when input is done */ + /* ok. for better Tx performance try do some output when + * input is done + */ if (test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode) && test_bit(MPU401_MODE_BIT_OUTPUT_TRIGGER, &mpu->mode)) { spin_lock(&mpu->output_lock); @@ -116,7 +122,8 @@ static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu) * * Processes the interrupt for MPU401-UART i/o. */ -irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, struct pt_regs *regs) +irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, + struct pt_regs *regs) { struct snd_mpu401 *mpu = dev_id; @@ -126,6 +133,8 @@ irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, struct pt_regs *reg return IRQ_HANDLED; } +EXPORT_SYMBOL(snd_mpu401_uart_interrupt); + /* * timer callback * reprogram the timer and call the interrupt job @@ -159,7 +168,8 @@ static void snd_mpu401_uart_add_timer (struct snd_mpu401 *mpu, int input) mpu->timer.expires = 1 + jiffies; add_timer(&mpu->timer); } - mpu->timer_invoked |= input ? MPU401_MODE_INPUT_TIMER : MPU401_MODE_OUTPUT_TIMER; + mpu->timer_invoked |= input ? MPU401_MODE_INPUT_TIMER : + MPU401_MODE_OUTPUT_TIMER; spin_unlock_irqrestore (&mpu->timer_lock, flags); } @@ -172,7 +182,8 @@ static void snd_mpu401_uart_remove_timer (struct snd_mpu401 *mpu, int input) spin_lock_irqsave (&mpu->timer_lock, flags); if (mpu->timer_invoked) { - mpu->timer_invoked &= input ? ~MPU401_MODE_INPUT_TIMER : ~MPU401_MODE_OUTPUT_TIMER; + mpu->timer_invoked &= input ? ~MPU401_MODE_INPUT_TIMER : + ~MPU401_MODE_OUTPUT_TIMER; if (! mpu->timer_invoked) del_timer(&mpu->timer); } @@ -180,11 +191,12 @@ static void snd_mpu401_uart_remove_timer (struct snd_mpu401 *mpu, int input) } /* - + * send a UART command + * return zero if successful, non-zero for some errors */ static int snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd, - int ack) + int ack) { unsigned long flags; int timeout, ok; @@ -196,11 +208,13 @@ static int snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd, } /* ok. standard MPU-401 initialization */ if (mpu->hardware != MPU401_HW_SB) { - for (timeout = 1000; timeout > 0 && !snd_mpu401_output_ready(mpu); timeout--) + for (timeout = 1000; timeout > 0 && + !snd_mpu401_output_ready(mpu); timeout--) udelay(10); #ifdef CONFIG_SND_DEBUG if (!timeout) - snd_printk("cmd: tx timeout (status = 0x%x)\n", mpu->read(mpu, MPU401C(mpu))); + snd_printk(KERN_ERR "cmd: tx timeout (status = 0x%x)\n", + mpu->read(mpu, MPU401C(mpu))); #endif } mpu->write(mpu, cmd, MPU401C(mpu)); @@ -215,12 +229,14 @@ static int snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd, } if (!ok && mpu->read(mpu, MPU401D(mpu)) == MPU401_ACK) ok = 1; - } else { + } else ok = 1; - } spin_unlock_irqrestore(&mpu->input_lock, flags); if (!ok) { - snd_printk("cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)\n", cmd, mpu->port, mpu->read(mpu, MPU401C(mpu)), mpu->read(mpu, MPU401D(mpu))); + snd_printk(KERN_ERR "cmd: 0x%x failed at 0x%lx " + "(status = 0x%x, data = 0x%x)\n", cmd, mpu->port, + mpu->read(mpu, MPU401C(mpu)), + mpu->read(mpu, MPU401D(mpu))); return 1; } return 0; @@ -314,7 +330,8 @@ static int snd_mpu401_uart_output_close(struct snd_rawmidi_substream *substream) /* * trigger input callback */ -static void snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substream, int up) +static void +snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substream, int up) { unsigned long flags; struct snd_mpu401 *mpu; @@ -322,7 +339,8 @@ static void snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substrea mpu = substream->rmidi->private_data; if (up) { - if (! test_and_set_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode)) { + if (! test_and_set_bit(MPU401_MODE_BIT_INPUT_TRIGGER, + &mpu->mode)) { /* first time - flush FIFO */ while (max-- > 0) mpu->read(mpu, MPU401D(mpu)); @@ -352,13 +370,11 @@ static void snd_mpu401_uart_input_read(struct snd_mpu401 * mpu) unsigned char byte; while (max-- > 0) { - if (snd_mpu401_input_avail(mpu)) { - byte = mpu->read(mpu, MPU401D(mpu)); - if (test_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode)) - snd_rawmidi_receive(mpu->substream_input, &byte, 1); - } else { + if (! snd_mpu401_input_avail(mpu)) break; /* input not available */ - } + byte = mpu->read(mpu, MPU401D(mpu)); + if (test_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode)) + snd_rawmidi_receive(mpu->substream_input, &byte, 1); } } @@ -380,16 +396,16 @@ static void snd_mpu401_uart_output_write(struct snd_mpu401 * mpu) int max = 256, timeout; do { - if (snd_rawmidi_transmit_peek(mpu->substream_output, &byte, 1) == 1) { + if (snd_rawmidi_transmit_peek(mpu->substream_output, + &byte, 1) == 1) { for (timeout = 100; timeout > 0; timeout--) { - if (snd_mpu401_output_ready(mpu)) { - mpu->write(mpu, byte, MPU401D(mpu)); - snd_rawmidi_transmit_ack(mpu->substream_output, 1); + if (snd_mpu401_output_ready(mpu)) break; - } } if (timeout == 0) break; /* Tx FIFO full - try again later */ + mpu->write(mpu, byte, MPU401D(mpu)); + snd_rawmidi_transmit_ack(mpu->substream_output, 1); } else { snd_mpu401_uart_remove_timer (mpu, 0); break; /* no other data - leave the tx loop */ @@ -400,7 +416,8 @@ static void snd_mpu401_uart_output_write(struct snd_mpu401 * mpu) /* * output trigger callback */ -static void snd_mpu401_uart_output_trigger(struct snd_rawmidi_substream *substream, int up) +static void +snd_mpu401_uart_output_trigger(struct snd_rawmidi_substream *substream, int up) { unsigned long flags; struct snd_mpu401 *mpu; @@ -499,8 +516,11 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, mpu->hardware = hardware; if (!integrated) { int res_size = hardware == MPU401_HW_PC98II ? 4 : 2; - if ((mpu->res = request_region(port, res_size, "MPU401 UART")) == NULL) { - snd_printk(KERN_ERR "mpu401_uart: unable to grab port 0x%lx size %d\n", port, res_size); + mpu->res = request_region(port, res_size, "MPU401 UART"); + if (mpu->res == NULL) { + snd_printk(KERN_ERR "mpu401_uart: " + "unable to grab port 0x%lx size %d\n", + port, res_size); snd_device_free(card, rmidi); return -EBUSY; } @@ -521,8 +541,10 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, else mpu->cport = port + 1; if (irq >= 0 && irq_flags) { - if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags, "MPU401 UART", (void *) mpu)) { - snd_printk(KERN_ERR "mpu401_uart: unable to grab IRQ %d\n", irq); + if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags, + "MPU401 UART", (void *) mpu)) { + snd_printk(KERN_ERR "mpu401_uart: " + "unable to grab IRQ %d\n", irq); snd_device_free(card, rmidi); return -EBUSY; } @@ -530,11 +552,14 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, mpu->irq = irq; mpu->irq_flags = irq_flags; if (card->shortname[0]) - snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI", card->shortname); + snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI", + card->shortname); else - sprintf(rmidi->name, "MPU-401 MIDI %d-%d", card->number, device); - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &snd_mpu401_uart_output); - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &snd_mpu401_uart_input); + sprintf(rmidi->name, "MPU-401 MIDI %d-%d",card->number, device); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, + &snd_mpu401_uart_output); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, + &snd_mpu401_uart_input); rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT | SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX; @@ -544,7 +569,6 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, return 0; } -EXPORT_SYMBOL(snd_mpu401_uart_interrupt); EXPORT_SYMBOL(snd_mpu401_uart_new); /* |