diff options
| -rw-r--r-- | drivers/net/3c515.c | 124 | ||||
| -rw-r--r-- | drivers/net/3c523.c | 91 | ||||
| -rw-r--r-- | drivers/net/3c527.c | 46 | ||||
| -rw-r--r-- | drivers/net/3c59x.c | 214 |
4 files changed, 233 insertions, 242 deletions
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c index 167bf23066e..7fd0ff74375 100644 --- a/drivers/net/3c515.c +++ b/drivers/net/3c515.c @@ -420,7 +420,7 @@ int init_module(void) if (debug >= 0) corkscrew_debug = debug; if (corkscrew_debug) - printk(version); + pr_debug("%s", version); while (corkscrew_scan(-1)) found++; return found ? 0 : -ENODEV; @@ -437,7 +437,7 @@ struct net_device *tc515_probe(int unit) if (corkscrew_debug > 0 && !printed) { printed = 1; - printk(version); + pr_debug("%s", version); } return dev; @@ -516,7 +516,7 @@ static struct net_device *corkscrew_scan(int unit) if (pnp_device_attach(idev) < 0) continue; if (pnp_activate_dev(idev) < 0) { - printk("pnp activate failed (out of resources?)\n"); + pr_warning("pnp activate failed (out of resources?)\n"); pnp_device_detach(idev); continue; } @@ -531,9 +531,9 @@ static struct net_device *corkscrew_scan(int unit) continue; } if(corkscrew_debug) - printk ("ISAPNP reports %s at i/o 0x%x, irq %d\n", + pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n", (char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq); - printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", + pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); /* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */ SET_NETDEV_DEV(dev, &idev->dev); @@ -552,7 +552,7 @@ no_pnp: if (!check_device(ioaddr)) continue; - printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", + pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); err = corkscrew_setup(dev, ioaddr, NULL, cards_found++); if (!err) @@ -625,7 +625,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr, list_add(&vp->list, &root_corkscrew_dev); #endif - printk(KERN_INFO "%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr); + pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr); spin_lock_init(&vp->lock); @@ -648,19 +648,19 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr, } checksum = (checksum ^ (checksum >> 8)) & 0xff; if (checksum != 0x00) - printk(" ***INVALID CHECKSUM %4.4x*** ", checksum); - printk(" %pM", dev->dev_addr); + pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); + pr_cont(" %pM", dev->dev_addr); if (eeprom[16] == 0x11c7) { /* Corkscrew */ if (request_dma(dev->dma, "3c515")) { - printk(", DMA %d allocation failed", dev->dma); + pr_cont(", DMA %d allocation failed", dev->dma); dev->dma = 0; } else - printk(", DMA %d", dev->dma); + pr_cont(", DMA %d", dev->dma); } - printk(", IRQ %d\n", dev->irq); + pr_cont(", IRQ %d\n", dev->irq); /* Tell them about an invalid IRQ. */ if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15)) - printk(KERN_WARNING " *** Warning: this IRQ is unlikely to work! ***\n"); + pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n"); { char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" }; @@ -669,9 +669,9 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr, vp->available_media = inw(ioaddr + Wn3_Options); config = inl(ioaddr + Wn3_Config); if (corkscrew_debug > 1) - printk(KERN_INFO " Internal config register is %4.4x, transceivers %#x.\n", + pr_info(" Internal config register is %4.4x, transceivers %#x.\n", config, inw(ioaddr + Wn3_Options)); - printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", + pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", 8 << config & Ram_size, config & Ram_width ? "word" : "byte", ram_split[(config & Ram_split) >> Ram_split_shift], @@ -682,7 +682,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr, dev->if_port = vp->default_media; } if (vp->media_override != 7) { - printk(KERN_INFO " Media override to transceiver type %d (%s).\n", + pr_info(" Media override to transceiver type %d (%s).\n", vp->media_override, media_tbl[vp->media_override].name); dev->if_port = vp->media_override; @@ -718,7 +718,7 @@ static int corkscrew_open(struct net_device *dev) if (vp->media_override != 7) { if (corkscrew_debug > 1) - printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n", + pr_info("%s: Media override to transceiver %d (%s).\n", dev->name, vp->media_override, media_tbl[vp->media_override].name); dev->if_port = vp->media_override; @@ -729,7 +729,7 @@ static int corkscrew_open(struct net_device *dev) dev->if_port = media_tbl[dev->if_port].next; if (corkscrew_debug > 1) - printk("%s: Initial media type %s.\n", + pr_debug("%s: Initial media type %s.\n", dev->name, media_tbl[dev->if_port].name); init_timer(&vp->timer); @@ -744,7 +744,7 @@ static int corkscrew_open(struct net_device *dev) outl(config, ioaddr + Wn3_Config); if (corkscrew_debug > 1) { - printk("%s: corkscrew_open() InternalConfig %8.8x.\n", + pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n", dev->name, config); } @@ -777,7 +777,7 @@ static int corkscrew_open(struct net_device *dev) if (corkscrew_debug > 1) { EL3WINDOW(4); - printk("%s: corkscrew_open() irq %d media status %4.4x.\n", + pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n", dev->name, dev->irq, inw(ioaddr + Wn4_Media)); } @@ -814,8 +814,7 @@ static int corkscrew_open(struct net_device *dev) if (vp->full_bus_master_rx) { /* Boomerang bus master. */ vp->cur_rx = vp->dirty_rx = 0; if (corkscrew_debug > 2) - printk("%s: Filling in the Rx ring.\n", - dev->name); + pr_debug("%s: Filling in the Rx ring.\n", dev->name); for (i = 0; i < RX_RING_SIZE; i++) { struct sk_buff *skb; if (i < (RX_RING_SIZE - 1)) @@ -877,7 +876,7 @@ static void corkscrew_timer(unsigned long data) int ok = 0; if (corkscrew_debug > 1) - printk("%s: Media selection timer tick happened, %s.\n", + pr_debug("%s: Media selection timer tick happened, %s.\n", dev->name, media_tbl[dev->if_port].name); spin_lock_irqsave(&vp->lock, flags); @@ -894,12 +893,12 @@ static void corkscrew_timer(unsigned long data) if (media_status & Media_LnkBeat) { ok = 1; if (corkscrew_debug > 1) - printk("%s: Media %s has link beat, %x.\n", + pr_debug("%s: Media %s has link beat, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); } else if (corkscrew_debug > 1) - printk("%s: Media %s is has no link beat, %x.\n", + pr_debug("%s: Media %s is has no link beat, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); @@ -907,7 +906,7 @@ static void corkscrew_timer(unsigned long data) break; default: /* Other media types handled by Tx timeouts. */ if (corkscrew_debug > 1) - printk("%s: Media %s is has no indication, %x.\n", + pr_debug("%s: Media %s is has no indication, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); @@ -925,12 +924,12 @@ static void corkscrew_timer(unsigned long data) if (dev->if_port == 8) { /* Go back to default. */ dev->if_port = vp->default_media; if (corkscrew_debug > 1) - printk("%s: Media selection failing, using default %s port.\n", + pr_debug("%s: Media selection failing, using default %s port.\n", dev->name, media_tbl[dev->if_port].name); } else { if (corkscrew_debug > 1) - printk("%s: Media selection failed, now trying %s port.\n", + pr_debug("%s: Media selection failed, now trying %s port.\n", dev->name, media_tbl[dev->if_port].name); vp->timer.expires = jiffies + media_tbl[dev->if_port].wait; @@ -953,7 +952,7 @@ static void corkscrew_timer(unsigned long data) spin_unlock_irqrestore(&vp->lock, flags); if (corkscrew_debug > 1) - printk("%s: Media selection timer finished, %s.\n", + pr_debug("%s: Media selection timer finished, %s.\n", dev->name, media_tbl[dev->if_port].name); #endif /* AUTOMEDIA */ @@ -966,23 +965,21 @@ static void corkscrew_timeout(struct net_device *dev) struct corkscrew_private *vp = netdev_priv(dev); int ioaddr = dev->base_addr; - printk(KERN_WARNING - "%s: transmit timed out, tx_status %2.2x status %4.4x.\n", + pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", dev->name, inb(ioaddr + TxStatus), inw(ioaddr + EL3_STATUS)); /* Slight code bloat to be user friendly. */ if ((inb(ioaddr + TxStatus) & 0x88) == 0x88) - printk(KERN_WARNING - "%s: Transmitter encountered 16 collisions -- network" + pr_warning("%s: Transmitter encountered 16 collisions --" " network cable problem?\n", dev->name); #ifndef final_version - printk(" Flags; bus-master %d, full %d; dirty %d current %d.\n", + pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n", vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, vp->cur_tx); - printk(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr), + pr_debug(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr), &vp->tx_ring[0]); for (i = 0; i < TX_RING_SIZE; i++) { - printk(" %d: %p length %8.8x status %8.8x\n", i, + pr_debug(" %d: %p length %8.8x status %8.8x\n", i, &vp->tx_ring[i], vp->tx_ring[i].length, vp->tx_ring[i].status); } @@ -1023,7 +1020,7 @@ static int corkscrew_start_xmit(struct sk_buff *skb, else prev_entry = NULL; if (corkscrew_debug > 3) - printk("%s: Trying to send a packet, Tx index %d.\n", + pr_debug("%s: Trying to send a packet, Tx index %d.\n", dev->name, vp->cur_tx); /* vp->tx_full = 1; */ vp->tx_skbuff[entry] = skb; @@ -1102,7 +1099,7 @@ static int corkscrew_start_xmit(struct sk_buff *skb, while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) { if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ if (corkscrew_debug > 2) - printk("%s: Tx error, status %2.2x.\n", + pr_debug("%s: Tx error, status %2.2x.\n", dev->name, tx_status); if (tx_status & 0x04) dev->stats.tx_fifo_errors++; @@ -1143,7 +1140,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) status = inw(ioaddr + EL3_STATUS); if (corkscrew_debug > 4) - printk("%s: interrupt, status %4.4x, timer %d.\n", + pr_debug("%s: interrupt, status %4.4x, timer %d.\n", dev->name, status, latency); if ((status & 0xE000) != 0xE000) { static int donedidthis; @@ -1151,7 +1148,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) Ignore a single early interrupt, but don't hang the machine for other interrupt problems. */ if (donedidthis++ > 100) { - printk(KERN_ERR "%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n", + pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n", dev->name, status, netif_running(dev)); free_irq(dev->irq, dev); dev->irq = -1; @@ -1160,14 +1157,14 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) do { if (corkscrew_debug > 5) - printk("%s: In interrupt loop, status %4.4x.\n", + pr_debug("%s: In interrupt loop, status %4.4x.\n", dev->name, status); if (status & RxComplete) corkscrew_rx(dev); if (status & TxAvailable) { if (corkscrew_debug > 5) - printk(" TX room bit was handled.\n"); + pr_debug(" TX room bit was handled.\n"); /* There's room in the FIFO for a full-sized packet. */ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); netif_wake_queue(dev); @@ -1212,19 +1209,20 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) if (status & StatsFull) { /* Empty statistics. */ static int DoneDidThat; if (corkscrew_debug > 4) - printk("%s: Updating stats.\n", dev->name); + pr_debug("%s: Updating stats.\n", dev->name); update_stats(ioaddr, dev); /* DEBUG HACK: Disable statistics as an interrupt source. */ /* This occurs when we have the wrong media type! */ if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) { int win, reg; - printk("%s: Updating stats failed, disabling stats as an" - " interrupt source.\n", dev->name); + pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n", + dev->name); for (win = 0; win < 8; win++) { EL3WINDOW(win); - printk("\n Vortex window %d:", win); + pr_notice("Vortex window %d:", win); for (reg = 0; reg < 16; reg++) - printk(" %2.2x", inb(ioaddr + reg)); + pr_cont(" %2.2x", inb(ioaddr + reg)); + pr_cont("\n"); } EL3WINDOW(7); outw(SetIntrEnb | TxAvailable | @@ -1246,9 +1244,8 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) } if (--i < 0) { - printk(KERN_ERR "%s: Too much work in interrupt, status %4.4x. " - "Disabling functions (%4.4x).\n", dev->name, - status, SetStatusEnb | ((~status) & 0x7FE)); + pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n", + dev->name, status, SetStatusEnb | ((~status) & 0x7FE)); /* Disable all pending interrupts. */ outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD); outw(AckIntr | 0x7FF, ioaddr + EL3_CMD); @@ -1262,7 +1259,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) spin_unlock(&lp->lock); if (corkscrew_debug > 4) - printk("%s: exiting interrupt, status %4.4x.\n", dev->name, status); + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status); return IRQ_HANDLED; } @@ -1273,13 +1270,13 @@ static int corkscrew_rx(struct net_device *dev) short rx_status; if (corkscrew_debug > 5) - printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", + pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); while ((rx_status = inw(ioaddr + RxStatus)) > 0) { if (rx_status & 0x4000) { /* Error, update stats. */ unsigned char rx_error = inb(ioaddr + RxErrors); if (corkscrew_debug > 2) - printk(" Rx error: status %2.2x.\n", + pr_debug(" Rx error: status %2.2x.\n", rx_error); dev->stats.rx_errors++; if (rx_error & 0x01) @@ -1299,7 +1296,7 @@ static int corkscrew_rx(struct net_device *dev) skb = dev_alloc_skb(pkt_len + 5 + 2); if (corkscrew_debug > 4) - printk("Receiving packet size %d status %4.4x.\n", + pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); if (skb != NULL) { skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ @@ -1318,7 +1315,7 @@ static int corkscrew_rx(struct net_device *dev) break; continue; } else if (corkscrew_debug) - printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); + pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); } outw(RxDiscard, ioaddr + EL3_CMD); dev->stats.rx_dropped++; @@ -1338,13 +1335,13 @@ static int boomerang_rx(struct net_device *dev) int rx_status; if (corkscrew_debug > 5) - printk(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n", + pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n", inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) { if (rx_status & RxDError) { /* Error, update stats. */ unsigned char rx_error = rx_status >> 16; if (corkscrew_debug > 2) - printk(" Rx error: status %2.2x.\n", + pr_debug(" Rx error: status %2.2x.\n", rx_error); dev->stats.rx_errors++; if (rx_error & 0x01) @@ -1364,7 +1361,7 @@ static int boomerang_rx(struct net_device *dev) dev->stats.rx_bytes += pkt_len; if (corkscrew_debug > 4) - printk("Receiving packet size %d status %4.4x.\n", + pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); /* Check if the packet is long enough to just accept without @@ -1385,7 +1382,7 @@ static int boomerang_rx(struct net_device *dev) temp = skb_put(skb, pkt_len); /* Remove this checking code for final release. */ if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp) - printk("%s: Warning -- the skbuff addresses do not match" + pr_warning("%s: Warning -- the skbuff addresses do not match" " in boomerang_rx: %p vs. %p / %p.\n", dev->name, isa_bus_to_virt(vp-> @@ -1427,12 +1424,11 @@ static int corkscrew_close(struct net_device *dev) netif_stop_queue(dev); if (corkscrew_debug > 1) { - printk("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n", + pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n", dev->name, inw(ioaddr + EL3_STATUS), inb(ioaddr + TxStatus)); - printk("%s: corkscrew close stats: rx_nocopy %d rx_copy %d" - " tx_queued %d.\n", dev->name, rx_nocopy, rx_copy, - queued_packet); + pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n", + dev->name, rx_nocopy, rx_copy, queued_packet); } del_timer(&vp->timer); @@ -1534,7 +1530,7 @@ static void set_rx_mode(struct net_device *dev) if (dev->flags & IFF_PROMISC) { if (corkscrew_debug > 3) - printk("%s: Setting promiscuous mode.\n", + pr_debug("%s: Setting promiscuous mode.\n", dev->name); new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm; } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) { diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index 8f734d74b51..cdd955c4014 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -176,7 +176,7 @@ sizeof(nop_cmd) = 8; if(!p->scb->cmd) break; \ DELAY_16(); \ if(i == 1023) { \ - printk(KERN_WARNING "%s:%d: scb_cmd timed out .. resetting i82586\n",\ + pr_warning("%s:%d: scb_cmd timed out .. resetting i82586\n",\ dev->name,__LINE__); \ elmc_id_reset586(); } } } @@ -291,7 +291,7 @@ static int elmc_open(struct net_device *dev) ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev); if (ret) { - printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq); + pr_err("%s: couldn't get irq %d\n", dev->name, dev->irq); elmc_id_reset586(); return ret; } @@ -371,9 +371,9 @@ static void alloc586(struct net_device *dev) DELAY(2); - if (p->iscp->busy) { - printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name); - } + if (p->iscp->busy) + pr_err("%s: Init-Problems (alloc).\n", dev->name); + memset((char *) p->scb, 0, sizeof(struct scb_struct)); } @@ -470,7 +470,7 @@ static int __init do_elmc_probe(struct net_device *dev) mca_set_adapter_procfn(slot, (MCA_ProcFn) elmc_getinfo, dev); /* if we get this far, adapter has been found - carry on */ - printk(KERN_INFO "%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1); + pr_info("%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1); /* Now we extract configuration info from the card. The 3c523 provides information in two of the POS registers, but @@ -507,7 +507,7 @@ static int __init do_elmc_probe(struct net_device *dev) memset(pr, 0, sizeof(struct priv)); pr->slot = slot; - printk(KERN_INFO "%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision, + pr_info("%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision, dev->base_addr); /* Determine if we're using the on-board transceiver (i.e. coax) or @@ -529,7 +529,7 @@ static int __init do_elmc_probe(struct net_device *dev) size = 0x4000; /* check for 16K mem */ if (!check586(dev, dev->mem_start, size)) { - printk(KERN_ERR "%s: memprobe, Can't find memory at 0x%lx!\n", dev->name, + pr_err("%s: memprobe, Can't find memory at 0x%lx!\n", dev->name, dev->mem_start); retval = -ENODEV; goto err_out; @@ -546,7 +546,7 @@ static int __init do_elmc_probe(struct net_device *dev) pr->num_recv_buffs = NUM_RECV_BUFFS_16; /* dump all the assorted information */ - printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name, + pr_info("%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name, dev->irq, dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end - 1); @@ -555,7 +555,7 @@ static int __init do_elmc_probe(struct net_device *dev) for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(dev->base_addr + i); - printk(KERN_INFO "%s: hardware address %pM\n", + pr_info("%s: hardware address %pM\n", dev->name, dev->dev_addr); dev->netdev_ops = &netdev_ops; @@ -660,7 +660,7 @@ static int init586(struct net_device *dev) } if ((cfg_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_COMPL | STAT_OK)) { - printk(KERN_WARNING "%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status); + pr_warning("%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status); return 1; } /* @@ -686,7 +686,8 @@ static int init586(struct net_device *dev) } if ((ias_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_OK | STAT_COMPL)) { - printk(KERN_WARNING "%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status); + pr_warning("%s (elmc): individual address setup command failed: %04x\n", + dev->name, ias_cmd->cmd_status); return 1; } /* @@ -707,7 +708,7 @@ static int init586(struct net_device *dev) s = jiffies; while (!(tdr_cmd->cmd_status & STAT_COMPL)) { if (time_after(jiffies, s + 30*HZ/100)) { - printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__); + pr_warning("%s: %d Problems while running the TDR.\n", dev->name, __LINE__); result = 1; break; } @@ -723,14 +724,14 @@ static int init586(struct net_device *dev) if (result & TDR_LNK_OK) { /* empty */ } else if (result & TDR_XCVR_PRB) { - printk(KERN_WARNING "%s: TDR: Transceiver problem!\n", dev->name); + pr_warning("%s: TDR: Transceiver problem!\n", dev->name); } else if (result & TDR_ET_OPN) { - printk(KERN_WARNING "%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK); + pr_warning("%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK); } else if (result & TDR_ET_SRT) { if (result & TDR_TIMEMASK) /* time == 0 -> strange :-) */ - printk(KERN_WARNING "%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK); + pr_warning("%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK); } else { - printk(KERN_WARNING "%s: TDR: Unknown status %04x\n", dev->name, result); + pr_warning("%s: TDR: Unknown status %04x\n", dev->name, result); } } /* @@ -774,11 +775,11 @@ static int init586(struct net_device *dev) /* I don't understand this: do we really need memory after the init? */ int len = ((char *) p->iscp - (char *) ptr - 8) / 6; if (len <= 0) { - printk(KERN_ERR "%s: Ooooops, no memory for MC-Setup!\n", dev->name); + pr_err("%s: Ooooops, no memory for MC-Setup!\n", dev->name); } else { if (len < num_addrs) { num_addrs = len; - printk(KERN_WARNING "%s: Sorry, can only apply %d MC-Address(es).\n", + pr_warning("%s: Sorry, can only apply %d MC-Address(es).\n", dev->name, num_addrs); } mc_cmd = (struct mcsetup_cmd_struct *) ptr; @@ -799,7 +800,7 @@ static int init586(struct net_device *dev) break; } if (!(mc_cmd->cmd_status & STAT_COMPL)) { - printk(KERN_WARNING "%s: Can't apply multicast-address-list.\n", dev->name); + pr_warning("%s: Can't apply multicast-address-list.\n", dev->name); } } } @@ -812,7 +813,7 @@ static int init586(struct net_device *dev) p->xmit_buffs[i] = (struct tbd_struct *) ptr; /* TBD */ ptr = (char *) ptr + sizeof(struct tbd_struct); if ((void *) ptr > (void *) p->iscp) { - printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", dev->name); + pr_err("%s: not enough shared-mem for your configuration!\n", dev->name); return 1; } memset((char *) (p->xmit_cmds[i]), 0, sizeof(struct transmit_cmd_struct)); @@ -936,7 +937,8 @@ elmc_interrupt(int irq, void *dev_id) if (stat & STAT_CNA) { /* CU went 'not ready' */ if (netif_running(dev)) { - printk(KERN_WARNING "%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status); + pr_warning("%s: oops! CU has left active state. stat: %04x/%04x.\n", + dev->name, (int) stat, (int) p->scb->status); } } #endif @@ -951,7 +953,8 @@ elmc_interrupt(int irq, void *dev_id) p->scb->cmd = RUC_RESUME; elmc_attn586(); } else { - printk(KERN_WARNING "%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status); + pr_warning("%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", + dev->name, (int) stat, (int) p->scb->status); elmc_rnr_int(dev); } } @@ -995,11 +998,11 @@ static void elmc_rcv_int(struct net_device *dev) dev->stats.rx_dropped++; } } else { - printk(KERN_WARNING "%s: received oversized frame.\n", dev->name); + pr_warning("%s: received oversized frame.\n", dev->name); dev->stats.rx_dropped++; } } else { /* frame !(ok), only with 'save-bad-frames' */ - printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status); + pr_warning("%s: oops! rfd-error-status: %04x\n", dev->name, status); dev->stats.rx_errors++; } p->rfd_top->status = 0; @@ -1028,7 +1031,7 @@ static void elmc_rnr_int(struct net_device *dev) alloc_rfa(dev, (char *) p->rfd_first); startrecv586(dev); /* restart RU */ - printk(KERN_WARNING "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status); + pr_warning("%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status); } @@ -1043,7 +1046,7 @@ static void elmc_xmt_int(struct net_device *dev) status = p->xmit_cmds[p->xmit_last]->cmd_status; if (!(status & STAT_COMPL)) { - printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); + pr_warning("%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); } if (status & STAT_OK) { dev->stats.tx_packets++; @@ -1051,18 +1054,18 @@ static void elmc_xmt_int(struct net_device *dev) } else { dev->stats.tx_errors++; if (status & TCMD_LATECOLL) { - printk(KERN_WARNING "%s: late collision detected.\n", dev->name); + pr_warning("%s: late collision detected.\n", dev->name); dev->stats.collisions++; } else if (status & TCMD_NOCARRIER) { dev->stats.tx_carrier_errors++; - printk(KERN_WARNING "%s: no carrier detected.\n", dev->name); + pr_warning("%s: no carrier detected.\n", dev->name); } else if (status & TCMD_LOSTCTS) { - printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name); + pr_warning("%s: loss of CTS detected.\n", dev->name); } else if (status & TCMD_UNDERRUN) { dev->stats.tx_fifo_errors++; - printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name); + pr_warning("%s: DMA underrun detected.\n", dev->name); } else if (status & TCMD_MAXCOLL) { - printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name); + pr_warning("%s: Max. collisions exceeded.\n", dev->name); dev->stats.collisions += 16; } } @@ -1099,10 +1102,11 @@ static void elmc_timeout(struct net_device *dev) struct priv *p = netdev_priv(dev); /* COMMAND-UNIT active? */ if (p->scb->status & CU_ACTIVE) { -#ifdef DEBUG - printk("%s: strange ... timeout with CU active?!?\n", dev->name); - printk("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, (int) p->xmit_cmds[0]->cmd_status, (int) p->nop_cmds[0]->cmd_status, (int) p->nop_cmds[1]->cmd_status, (int) p->nop_point); -#endif + pr_debug("%s: strange ... timeout with CU active?!?\n", dev->name); + pr_debug("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, + (int)p->xmit_cmds[0]->cmd_status, + (int)p->nop_cmds[0]->cmd_status, + (int)p->nop_cmds[1]->cmd_status, (int)p->nop_point); p->scb->cmd = CUC_ABORT; elmc_attn586(); WAIT_4_SCB_CMD(); @@ -1112,10 +1116,10 @@ static void elmc_timeout(struct net_device *dev) WAIT_4_SCB_CMD(); netif_wake_queue(dev); } else { -#ifdef DEBUG - printk("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status); - printk("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status); -#endif + pr_debug("%s: xmitter timed out, try to restart! stat: %04x\n", + dev->name, p->scb->status); + pr_debug("%s: command-stats: %04x %04x\n", dev->name, + p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status); elmc_close(dev); elmc_open(dev); } @@ -1162,7 +1166,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev) break; } if (i == 15) { - printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name); + pr_warning("%s: Can't start transmit-command.\n", dev->name); } } #else @@ -1287,11 +1291,12 @@ int __init init_module(void) free_netdev(dev); if (io[this_dev]==0) break; - printk(KERN_WARNING "3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]); + pr_warning("3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]); } if(found==0) { - if(io[0]==0) printk(KERN_NOTICE "3c523.c: No 3c523 cards found\n"); + if (io[0]==0) + pr_notice("3c523.c: No 3c523 cards found\n"); return -ENXIO; } else return 0; } diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index b61073c42bf..c10ca30458f 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -125,8 +125,6 @@ static const char* cardname = DRV_NAME; #define NET_DEBUG 2 #endif -#undef DEBUG_IRQ - static unsigned int mc32_debug = NET_DEBUG; /* The number of low I/O ports used by the ethercard. */ @@ -351,15 +349,15 @@ static int __init mc32_probe1(struct net_device *dev, int slot) /* Time to play MCA games */ if (mc32_debug && version_printed++ == 0) - printk(KERN_DEBUG "%s", version); + pr_debug("%s", version); - printk(KERN_INFO "%s: %s found in slot %d:", dev->name, cardname, slot); + pr_info("%s: %s found in slot %d: ", dev->name, cardname, slot); POS = mca_read_stored_pos(slot, 2); if(!(POS&1)) { - printk(" disabled.\n"); + pr_cont("disabled.\n"); return -ENODEV; } @@ -370,7 +368,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) POS = mca_read_stored_pos(slot, 4); if(!(POS&1)) { - printk("memory window disabled.\n"); + pr_cont("memory window disabled.\n"); return -ENODEV; } @@ -379,7 +377,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) i=(POS>>4)&3; if(i==3) { - printk("invalid memory window.\n"); + pr_cont("invalid memory window.\n"); return -ENODEV; } @@ -392,11 +390,11 @@ static int __init mc32_probe1(struct net_device *dev, int slot) if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname)) { - printk("io 0x%3lX, which is busy.\n", dev->base_addr); + pr_cont("io 0x%3lX, which is busy.\n", dev->base_addr); return -EBUSY; } - printk("io 0x%3lX irq %d mem 0x%lX (%dK)\n", + pr_cont("io 0x%3lX irq %d mem 0x%lX (%dK)\n", dev->base_addr, dev->irq, dev->mem_start, i/1024); @@ -416,7 +414,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) dev->dev_addr[i] = mca_read_pos(slot,3); } - printk("%s: Address %pM", dev->name, dev->dev_addr); + pr_info("%s: Address %pM ", dev->name, dev->dev_addr); mca_write_pos(slot, 6, 0); mca_write_pos(slot, 7, 0); @@ -424,9 +422,9 @@ static int __init mc32_probe1(struct net_device *dev, int slot) POS = mca_read_stored_pos(slot, 4); if(POS&2) - printk(" : BNC port selected.\n"); + pr_cont(": BNC port selected.\n"); else - printk(" : AUI port selected.\n"); + pr_cont(": AUI port selected.\n"); POS=inb(dev->base_addr+HOST_CTRL); POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET; @@ -447,7 +445,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev); if (err) { release_region(dev->base_addr, MC32_IO_EXTENT); - printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq); + pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq); goto err_exit_ports; } @@ -463,7 +461,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) i++; if(i == 1000) { - printk(KERN_ERR "%s: failed to boot adapter.\n", dev->name); + pr_err("%s: failed to boot adapter.\n", dev->name); err = -ENODEV; goto err_exit_irq; } @@ -475,10 +473,10 @@ static int __init mc32_probe1(struct net_device *dev, int slot) if(base>0) { if(base < 0x0C) - printk(KERN_ERR "%s: %s%s.\n", dev->name, failures[base-1], + pr_err("%s: %s%s.\n", dev->name, failures[base-1], base<0x0A?" test failure":""); else - printk(KERN_ERR "%s: unknown failure %d.\n", dev->name, base); + pr_err("%s: unknown failure %d.\n", dev->name, base); err = -ENODEV; goto err_exit_irq; } @@ -494,7 +492,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) udelay(50); if(n>100) { - printk(KERN_ERR "%s: mailbox read fail (%d).\n", dev->name, i); + pr_err("%s: mailbox read fail (%d).\n", dev->name, i); err = -ENODEV; goto err_exit_irq; } @@ -527,7 +525,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) init_completion(&lp->execution_cmd); init_completion(&lp->xceiver_cmd); - printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n", + pr_info("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n", dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base); dev->netdev_ops = &netdev_ops; @@ -939,7 +937,7 @@ static int mc32_open(struct net_device *dev) */ if(mc32_command(dev, 8, descnumbuffs, 4)) { - printk("%s: %s rejected our buffer configuration!\n", + pr_info("%s: %s rejected our buffer configuration!\n", dev->name, cardname); mc32_close(dev); return -ENOBUFS; @@ -995,7 +993,7 @@ static int mc32_open(struct net_device *dev) static void mc32_timeout(struct net_device *dev) { - printk(KERN_WARNING "%s: transmit timed out?\n", dev->name); + pr_warning("%s: transmit timed out?\n", dev->name); /* Try to restart the adaptor. */ netif_wake_queue(dev); } @@ -1335,11 +1333,9 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id) { status=inb(ioaddr+HOST_CMD); -#ifdef DEBUG_IRQ - printk("Status TX%d RX%d EX%d OV%d BC%d\n", + pr_debug("Status TX%d RX%d EX%d OV%d BC%d\n", (status&7), (status>>3)&7, (status>>6)&1, (status>>7)&1, boguscount); -#endif switch(status&7) { @@ -1354,7 +1350,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id) complete(&lp->xceiver_cmd); break; default: - printk("%s: strange tx ack %d\n", dev->name, status&7); + pr_notice("%s: strange tx ack %d\n", dev->name, status&7); } status>>=3; switch(status&7) @@ -1376,7 +1372,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id) mc32_start_transceiver(dev); break; default: - printk("%s: strange rx ack %d\n", + pr_notice("%s: strange rx ack %d\n", dev->name, status&7); } status>>=3; diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index c5669840242..a6e8a2da3bc 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -828,14 +828,14 @@ static int vortex_resume(struct pci_dev *pdev) pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) { - printk(KERN_WARNING "%s: Could not enable device \n", + pr_warning("%s: Could not enable device\n", dev->name); return err; } pci_set_master(pdev); if (request_irq(dev->irq, vp->full_bus_master_rx ? &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) { - printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq); + pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); pci_disable_device(pdev); return -EBUSY; } @@ -894,7 +894,7 @@ static int __devexit vortex_eisa_remove(struct device *device) dev = eisa_get_drvdata(edev); if (!dev) { - printk("vortex_eisa_remove called for Compaq device!\n"); + pr_err("vortex_eisa_remove called for Compaq device!\n"); BUG(); } @@ -1051,7 +1051,7 @@ static int __devinit vortex_probe1(struct device *gendev, struct eisa_device *edev = NULL; if (!printed_version) { - printk (version); + pr_info("%s", version); printed_version = 1; } @@ -1068,7 +1068,7 @@ static int __devinit vortex_probe1(struct device *gendev, dev = alloc_etherdev(sizeof(*vp)); retval = -ENOMEM; if (!dev) { - printk (KERN_ERR PFX "unable to allocate etherdev, aborting\n"); + pr_err(PFX "unable to allocate etherdev, aborting\n"); goto out; } SET_NETDEV_DEV(dev, gendev); @@ -1100,9 +1100,9 @@ static int __devinit vortex_probe1(struct device *gendev, print_info = (vortex_debug > 1); if (print_info) - printk (KERN_INFO "See Documentation/networking/vortex.txt\n"); + pr_info("See Documentation/networking/vortex.txt\n"); - printk(KERN_INFO "%s: 3Com %s %s at %p.\n", + pr_info("%s: 3Com %s %s at %p.\n", print_name, pdev ? "PCI" : "EISA", vci->name, @@ -1144,10 +1144,9 @@ static int __devinit vortex_probe1(struct device *gendev, chip only. */ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); if (pci_latency < new_latency) { - printk(KERN_INFO "%s: Overriding PCI latency" - " timer (CFLT) setting of %d, new value is %d.\n", + pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n", print_name, pci_latency, new_latency); - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); } } } @@ -1236,17 +1235,17 @@ static int __devinit vortex_probe1(struct device *gendev, checksum = (checksum ^ (checksum >> 8)) & 0xff; } if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO)) - printk(" ***INVALID CHECKSUM %4.4x*** ", checksum); + pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); for (i = 0; i < 3; i++) ((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); if (print_info) - printk(" %pM", dev->dev_addr); + pr_cont(" %pM", dev->dev_addr); /* Unfortunately an all zero eeprom passes the checksum and this gets found in the wild in failure cases. Crypto is hard 8) */ if (!is_valid_ether_addr(dev->dev_addr)) { retval = -EINVAL; - printk(KERN_ERR "*** EEPROM MAC address is invalid.\n"); + pr_err("*** EEPROM MAC address is invalid.\n"); goto free_ring; /* With every pack */ } EL3WINDOW(2); @@ -1254,17 +1253,17 @@ static int __devinit vortex_probe1(struct device *gendev, iowrite8(dev->dev_addr[i], ioaddr + i); if (print_info) - printk(", IRQ %d\n", dev->irq); + pr_cont(", IRQ %d\n", dev->irq); /* Tell them about an invalid IRQ. */ if (dev->irq <= 0 || dev->irq >= nr_irqs) - printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n", + pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n", dev->irq); EL3WINDOW(4); step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1; if (print_info) { - printk(KERN_INFO " product code %02x%02x rev %02x.%d date %02d-" - "%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14], + pr_info(" product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n", + eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14], step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9); } @@ -1279,8 +1278,7 @@ static int __devinit vortex_probe1(struct device *gendev, } if (print_info) { - printk(KERN_INFO "%s: CardBus functions mapped " - "%16.16llx->%p\n", + pr_info("%s: CardBus functions mapped %16.16llx->%p\n", print_name, (unsigned long long)pci_resource_start(pdev, 2), vp->cb_fn_base); @@ -1307,7 +1305,7 @@ static int __devinit vortex_probe1(struct device *gendev, if (vp->info1 & 0x8000) { vp->full_duplex = 1; if (print_info) - printk(KERN_INFO "Full duplex capable\n"); + pr_info("Full duplex capable\n"); } { @@ -1319,9 +1317,9 @@ static int __devinit vortex_probe1(struct device *gendev, vp->available_media = 0x40; config = ioread32(ioaddr + Wn3_Config); if (print_info) { - printk(KERN_DEBUG " Internal config register is %4.4x, " - "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options)); - printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", + pr_debug(" Internal config register is %4.4x, transceivers %#x.\n", + config, ioread16(ioaddr + Wn3_Options)); + pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", 8 << RAM_SIZE(config), RAM_WIDTH(config) ? "word" : "byte", ram_split[RAM_SPLIT(config)], @@ -1336,7 +1334,7 @@ static int __devinit vortex_probe1(struct device *gendev, } if (vp->media_override != 7) { - printk(KERN_INFO "%s: Media override to transceiver type %d (%s).\n", + pr_info("%s: Media override to transceiver type %d (%s).\n", print_name, vp->media_override, media_tbl[vp->media_override].name); dev->if_port = vp->media_override; @@ -1369,8 +1367,8 @@ static int __devinit vortex_probe1(struct device *gendev, if (mii_status && mii_status != 0xffff) { vp->phys[phy_idx++] = phyx; if (print_info) { - printk(KERN_INFO " MII transceiver found at address %d," - " status %4x.\n", phyx, mii_status); + pr_info(" MII transceiver found at address %d, status %4x.\n", + phyx, mii_status); } if ((mii_status & 0x0040) == 0) mii_preamble_required++; @@ -1378,7 +1376,7 @@ static int __devinit vortex_probe1(struct device *gendev, } mii_preamble_required--; if (phy_idx == 0) { - printk(KERN_WARNING" ***WARNING*** No MII transceivers found!\n"); + pr_warning(" ***WARNING*** No MII transceivers found!\n"); vp->phys[0] = 24; } else { vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE); @@ -1394,7 +1392,7 @@ static int __devinit vortex_probe1(struct device *gendev, if (vp->capabilities & CapBusMaster) { vp->full_bus_master_tx = 1; if (print_info) { - printk(KERN_INFO " Enabling bus-master transmits and %s receives.\n", + pr_info(" Enabling bus-master transmits and %s receives.\n", (vp->info2 & 1) ? "early" : "whole-frame" ); } vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2; @@ -1414,7 +1412,7 @@ static int __devinit vortex_probe1(struct device *gendev, dev->netdev_ops = &vortex_netdev_ops; if (print_info) { - printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n", + pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n", print_name, (dev->features & NETIF_F_SG) ? "en":"dis", (dev->features & NETIF_F_IP_CSUM) ? "en":"dis"); @@ -1442,7 +1440,7 @@ free_region: if (vp->must_free_region) release_region(dev->base_addr, vci->io_size); free_netdev(dev); - printk(KERN_ERR PFX "vortex_probe1 fails. Returns %d\n", retval); + pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); out: return retval; } @@ -1464,13 +1462,13 @@ issue_and_wait(struct net_device *dev, int cmd) for (i = 0; i < 100000; i++) { if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) { if (vortex_debug > 1) - printk(KERN_INFO "%s: command 0x%04x took %d usecs\n", + pr_info("%s: command 0x%04x took %d usecs\n", dev->name, cmd, i * 10); return; } udelay(10); } - printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n", + pr_err("%s: command 0x%04x did not complete! Status=0x%x\n", dev->name, cmd, ioread16(ioaddr + EL3_STATUS)); } @@ -1480,7 +1478,7 @@ vortex_set_duplex(struct net_device *dev) struct vortex_private *vp = netdev_priv(dev); void __iomem *ioaddr = vp->ioaddr; - printk(KERN_INFO "%s: setting %s-duplex.\n", + pr_info("%s: setting %s-duplex.\n", dev->name, (vp->full_duplex) ? "full" : "half"); EL3WINDOW(3); @@ -1522,7 +1520,7 @@ vortex_up(struct net_device *dev) pci_restore_state(VORTEX_PCI(vp)); err = pci_enable_device(VORTEX_PCI(vp)); if (err) { - printk(KERN_WARNING "%s: Could not enable device \n", + pr_warning("%s: Could not enable device\n", dev->name); goto err_out; } @@ -1533,14 +1531,14 @@ vortex_up(struct net_device *dev) config = ioread32(ioaddr + Wn3_Config); if (vp->media_override != 7) { - printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n", + pr_info("%s: Media override to transceiver %d (%s).\n", dev->name, vp->media_override, media_tbl[vp->media_override].name); dev->if_port = vp->media_override; } else if (vp->autoselect) { if (vp->has_nway) { if (vortex_debug > 1) - printk(KERN_INFO "%s: using NWAY device table, not %d\n", + pr_info("%s: using NWAY device table, not %d\n", dev->name, dev->if_port); dev->if_port = XCVR_NWAY; } else { @@ -1549,13 +1547,13 @@ vortex_up(struct net_device *dev) while (! (vp->available_media & media_tbl[dev->if_port].mask)) dev->if_port = media_tbl[dev->if_port].next; if (vortex_debug > 1) - printk(KERN_INFO "%s: first available media type: %s\n", + pr_info("%s: first available media type: %s\n", dev->name, media_tbl[dev->if_port].name); } } else { dev->if_port = vp->default_media; if (vortex_debug > 1) - printk(KERN_INFO "%s: using default media %s\n", + pr_info("%s: using default media %s\n", dev->name, media_tbl[dev->if_port].name); } @@ -1570,13 +1568,13 @@ vortex_up(struct net_device *dev) vp->rx_oom_timer.function = rx_oom_timer; if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Initial media type %s.\n", + pr_debug("%s: Initial media type %s.\n", dev->name, media_tbl[dev->if_port].name); vp->full_duplex = vp->mii.force_media; config = BFINS(config, dev->if_port, 20, 4); if (vortex_debug > 6) - printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config); + pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config); iowrite32(config, ioaddr + Wn3_Config); if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { @@ -1602,7 +1600,7 @@ vortex_up(struct net_device *dev) if (vortex_debug > 1) { EL3WINDOW(4); - printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n", + pr_debug("%s: vortex_up() irq %d media status %4.4x.\n", dev->name, dev->irq, ioread16(ioaddr + Wn4_Media)); } @@ -1704,13 +1702,13 @@ vortex_open(struct net_device *dev) /* Use the now-standard shared IRQ implementation. */ if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ? &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) { - printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq); + pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); goto err; } if (vp->full_bus_master_rx) { /* Boomerang bus master. */ if (vortex_debug > 2) - printk(KERN_DEBUG "%s: Filling in the Rx ring.\n", dev->name); + pr_debug("%s: Filling in the Rx ring.\n", dev->name); for (i = 0; i < RX_RING_SIZE; i++) { struct sk_buff *skb; vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); @@ -1728,7 +1726,7 @@ vortex_open(struct net_device *dev) } if (i != RX_RING_SIZE) { int j; - printk(KERN_EMERG "%s: no memory for rx ring\n", dev->name); + pr_emerg("%s: no memory for rx ring\n", dev->name); for (j = 0; j < i; j++) { if (vp->rx_skbuff[j]) { dev_kfree_skb(vp->rx_skbuff[j]); @@ -1750,7 +1748,7 @@ err_free_irq: free_irq(dev->irq, dev); err: if (vortex_debug > 1) - printk(KERN_ERR "%s: vortex_open() fails: returning %d\n", dev->name, retval); + pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval); out: return retval; } @@ -1766,9 +1764,9 @@ vortex_timer(unsigned long data) int media_status, old_window; if (vortex_debug > 2) { - printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n", + pr_debug("%s: Media selection timer tick happened, %s.\n", dev->name, media_tbl[dev->if_port].name); - printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo); + pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo); } disable_irq_lockdep(dev->irq); @@ -1781,12 +1779,12 @@ vortex_timer(unsigned long data) netif_carrier_on(dev); ok = 1; if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n", + pr_debug("%s: Media %s has link beat, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); } else { netif_carrier_off(dev); if (vortex_debug > 1) { - printk(KERN_DEBUG "%s: Media %s has no link beat, %x.\n", + pr_debug("%s: Media %s has no link beat, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); } } @@ -1802,7 +1800,7 @@ vortex_timer(unsigned long data) break; default: /* Other media types handled by Tx timeouts. */ if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Media %s has no indication, %x.\n", + pr_debug("%s: Media %s has no indication, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); ok = 1; } @@ -1822,13 +1820,11 @@ vortex_timer(unsigned long data) if (dev->if_port == XCVR_Default) { /* Go back to default. */ dev->if_port = vp->default_media; if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Media selection failing, using default " - "%s port.\n", + pr_debug("%s: Media selection failing, using default %s port.\n", dev->name, media_tbl[dev->if_port].name); } else { if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Media selection failed, now trying " - "%s port.\n", + pr_debug("%s: Media selection failed, now trying %s port.\n", dev->name, media_tbl[dev->if_port].name); next_tick = media_tbl[dev->if_port].wait; } @@ -1843,13 +1839,13 @@ vortex_timer(unsigned long data) iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax, ioaddr + EL3_CMD); if (vortex_debug > 1) - printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config); + pr_debug("wrote 0x%08x to Wn3_Config\n", config); /* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */ } leave_media_alone: if (vortex_debug > 2) - printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n", + pr_debug("%s: Media selection timer finished, %s.\n", dev->name, media_tbl[dev->if_port].name); EL3WINDOW(old_window); @@ -1865,21 +1861,21 @@ static void vortex_tx_timeout(struct net_device *dev) struct vortex_private *vp = netdev_priv(dev); void __iomem *ioaddr = vp->ioaddr; - printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n", + pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", dev->name, ioread8(ioaddr + TxStatus), ioread16(ioaddr + EL3_STATUS)); EL3WINDOW(4); - printk(KERN_ERR " diagnostics: net %04x media %04x dma %08x fifo %04x\n", + pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n", ioread16(ioaddr + Wn4_NetDiag), ioread16(ioaddr + Wn4_Media), ioread32(ioaddr + PktStatus), ioread16(ioaddr + Wn4_FIFODiag)); /* Slight code bloat to be user friendly. */ if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88) - printk(KERN_ERR "%s: Transmitter encountered 16 collisions --" + pr_err("%s: Transmitter encountered 16 collisions --" " network cable problem?\n", dev->name); if (ioread16(ioaddr + EL3_STATUS) & IntLatch) { - printk(KERN_ERR "%s: Interrupt posted but not delivered --" + pr_err("%s: Interrupt posted but not delivered --" " IRQ blocked by another device?\n", dev->name); /* Bad idea here.. but we might as well handle a few events. */ { @@ -1903,7 +1899,7 @@ static void vortex_tx_timeout(struct net_device *dev) dev->stats.tx_errors++; if (vp->full_bus_master_tx) { - printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name); + pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name); if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0) iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc), ioaddr + DownListPtr); @@ -1938,7 +1934,7 @@ vortex_error(struct net_device *dev, int status) unsigned char tx_status = 0; if (vortex_debug > 2) { - printk(KERN_ERR "%s: vortex_error(), status=0x%x\n", dev->name, status); + pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status); } if (status & TxComplete) { /* Really "TxError" for us. */ @@ -1946,10 +1942,10 @@ vortex_error(struct net_device *dev, int status) /* Presumably a tx-timeout. We must merely re-enable. */ if (vortex_debug > 2 || (tx_status != 0x88 && vortex_debug > 0)) { - printk(KERN_ERR "%s: Transmit error, Tx status register %2.2x.\n", + pr_err("%s: Transmit error, Tx status register %2.2x.\n", dev->name, tx_status); if (tx_status == 0x82) { - printk(KERN_ERR "Probably a duplex mismatch. See " + pr_err("Probably a duplex mismatch. See " "Documentation/networking/vortex.txt\n"); } dump_tx_ring(dev); @@ -1975,13 +1971,13 @@ vortex_error(struct net_device *dev, int status) if (status & StatsFull) { /* Empty statistics. */ static int DoneDidThat; if (vortex_debug > 4) - printk(KERN_DEBUG "%s: Updating stats.\n", dev->name); + pr_debug("%s: Updating stats.\n", dev->name); update_stats(ioaddr, dev); /* HACK: Disable statistics as an interrupt source. */ /* This occurs when we have the wrong media type! */ if (DoneDidThat == 0 && ioread16(ioaddr + EL3_STATUS) & StatsFull) { - printk(KERN_WARNING "%s: Updating statistics failed, disabling " + pr_warning("%s: Updating statistics failed, disabling " "stats as an interrupt source.\n", dev->name); EL3WINDOW(5); iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD); @@ -1998,7 +1994,7 @@ vortex_error(struct net_device *dev, int status) u16 fifo_diag; EL3WINDOW(4); fifo_diag = ioread16(ioaddr + Wn4_FIFODiag); - printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n", + pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n", dev->name, fifo_diag); /* Adapter failure requires Tx/Rx reset and reinit. */ if (vp->full_bus_master_tx) { @@ -2006,7 +2002,7 @@ vortex_error(struct net_device *dev, int status) /* 0x80000000 PCI master abort. */ /* 0x40000000 PCI target abort. */ if (vortex_debug) - printk(KERN_ERR "%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); + pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); /* In this case, blow the card away */ /* Must not enter D3 or we can't legally issue the reset! */ @@ -2075,7 +2071,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) { if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ if (vortex_debug > 2) - printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n", + pr_debug("%s: Tx error, status %2.2x.\n", dev->name, tx_status); if (tx_status & 0x04) dev->stats.tx_fifo_errors++; if (tx_status & 0x38) dev->stats.tx_aborted_errors++; @@ -2101,14 +2097,14 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned long flags; if (vortex_debug > 6) { - printk(KERN_DEBUG "boomerang_start_xmit()\n"); - printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", + pr_debug("boomerang_start_xmit()\n"); + pr_debug("%s: Trying to send a packet, Tx index %d.\n", dev->name, vp->cur_tx); } if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { if (vortex_debug > 0) - printk(KERN_WARNING "%s: BUG! Tx Ring full, refusing to send buffer.\n", + pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n", dev->name); netif_stop_queue(dev); return 1; @@ -2204,7 +2200,7 @@ vortex_interrupt(int irq, void *dev_id) status = ioread16(ioaddr + EL3_STATUS); if (vortex_debug > 6) - printk("vortex_interrupt(). status=0x%4x\n", status); + pr_debug("vortex_interrupt(). status=0x%4x\n", status); if ((status & IntLatch) == 0) goto handler_exit; /* No interrupt: shared IRQs cause this */ @@ -2219,19 +2215,19 @@ vortex_interrupt(int irq, void *dev_id) goto handler_exit; if (vortex_debug > 4) - printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n", + pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", dev->name, status, ioread8(ioaddr + Timer)); do { if (vortex_debug > 5) - printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n", + pr_debug("%s: In interrupt loop, status %4.4x.\n", dev->name, status); if (status & RxComplete) vortex_rx(dev); if (status & TxAvailable) { if (vortex_debug > 5) - printk(KERN_DEBUG " TX room bit was handled.\n"); + pr_debug(" TX room bit was handled.\n"); /* There's room in the FIFO for a full-sized packet. */ iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD); netif_wake_queue (dev); @@ -2263,8 +2259,8 @@ vortex_interrupt(int irq, void *dev_id) } if (--work_done < 0) { - printk(KERN_WARNING "%s: Too much work in interrupt, status " - "%4.4x.\n", dev->name, status); + pr_warning("%s: Too much work in interrupt, status %4.4x.\n", + dev->name, status); /* Disable all pending interrupts. */ do { vp->deferred |= status; @@ -2281,7 +2277,7 @@ vortex_interrupt(int irq, void *dev_id) } while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); if (vortex_debug > 4) - printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status); handler_exit: spin_unlock(&vp->lock); @@ -2313,14 +2309,14 @@ boomerang_interrupt(int irq, void *dev_id) status = ioread16(ioaddr + EL3_STATUS); if (vortex_debug > 6) - printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status); + pr_debug("boomerang_interrupt. status=0x%4x\n", status); if ((status & IntLatch) == 0) goto handler_exit; /* No interrupt: shared IRQs can cause this */ if (status == 0xffff) { /* h/w no longer present (hotplug)? */ if (vortex_debug > 1) - printk(KERN_DEBUG "boomerang_interrupt(1): status = 0xffff\n"); + pr_debug("boomerang_interrupt(1): status = 0xffff\n"); goto handler_exit; } @@ -2330,16 +2326,16 @@ boomerang_interrupt(int irq, void *dev_id) } if (vortex_debug > 4) - printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n", + pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", dev->name, status, ioread8(ioaddr + Timer)); do { if (vortex_debug > 5) - printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n", + pr_debug("%s: In interrupt loop, status %4.4x.\n", dev->name, status); if (status & UpComplete) { iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD); if (vortex_debug > 5) - printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n"); + pr_debug("boomerang_interrupt->boomerang_rx\n"); boomerang_rx(dev); } @@ -2374,7 +2370,7 @@ boomerang_interrupt(int irq, void *dev_id) dev_kfree_skb_irq(skb); vp->tx_skbuff[entry] = NULL; } else { - printk(KERN_DEBUG "boomerang_interrupt: no skb!\n"); + pr_debug("boomerang_interrupt: no skb!\n"); } /* dev->stats.tx_packets++; Counted below. */ dirty_tx++; @@ -2382,7 +2378,7 @@ boomerang_interrupt(int irq, void *dev_id) vp->dirty_tx = dirty_tx; if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) { if (vortex_debug > 6) - printk(KERN_DEBUG "boomerang_interrupt: wake queue\n"); + pr_debug("boomerang_interrupt: wake queue\n"); netif_wake_queue (dev); } } @@ -2392,8 +2388,8 @@ boomerang_interrupt(int irq, void *dev_id) vortex_error(dev, status); if (--work_done < 0) { - printk(KERN_WARNING "%s: Too much work in interrupt, status " - "%4.4x.\n", dev->name, status); + pr_warning("%s: Too much work in interrupt, status %4.4x.\n", + dev->name, status); /* Disable all pending interrupts. */ do { vp->deferred |= status; @@ -2413,7 +2409,7 @@ boomerang_interrupt(int irq, void *dev_id) } while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch); if (vortex_debug > 4) - printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status); handler_exit: spin_unlock(&vp->lock); @@ -2428,13 +2424,13 @@ static int vortex_rx(struct net_device *dev) short rx_status; if (vortex_debug > 5) - printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n", + pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n", ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus)); while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) { if (rx_status & 0x4000) { /* Error, update stats. */ unsigned char rx_error = ioread8(ioaddr + RxErrors); if (vortex_debug > 2) - printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error); + pr_debug(" Rx error: status %2.2x.\n", rx_error); dev->stats.rx_errors++; if (rx_error & 0x01) dev->stats.rx_over_errors++; if (rx_error & 0x02) dev->stats.rx_length_errors++; @@ -2448,7 +2444,7 @@ static int vortex_rx(struct net_device *dev) skb = dev_alloc_skb(pkt_len + 5); if (vortex_debug > 4) - printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n", + pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); if (skb != NULL) { skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ @@ -2478,8 +2474,8 @@ static int vortex_rx(struct net_device *dev) break; continue; } else if (vortex_debug > 0) - printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of " - "size %d.\n", dev->name, pkt_len); + pr_notice("%s: No memory to allocate a sk_buff of size %d.\n", + dev->name, pkt_len); dev->stats.rx_dropped++; } issue_and_wait(dev, RxDiscard); @@ -2498,7 +2494,7 @@ boomerang_rx(struct net_device *dev) int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; if (vortex_debug > 5) - printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); + pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){ if (--rx_work_limit < 0) @@ -2506,7 +2502,7 @@ boomerang_rx(struct net_device *dev) if (rx_status & RxDError) { /* Error, update stats. */ unsigned char rx_error = rx_status >> 16; if (vortex_debug > 2) - printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error); + pr_debug(" Rx error: status %2.2x.\n", rx_error); dev->stats.rx_errors++; if (rx_error & 0x01) dev->stats.rx_over_errors++; if (rx_error & 0x02) dev->stats.rx_length_errors++; @@ -2520,7 +2516,7 @@ boomerang_rx(struct net_device *dev) dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr); if (vortex_debug > 4) - printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n", + pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); /* Check if the packet is long enough to just accept without @@ -2566,7 +2562,7 @@ boomerang_rx(struct net_device *dev) if (skb == NULL) { static unsigned long last_jif; if (time_after(jiffies, last_jif + 10 * HZ)) { - printk(KERN_WARNING "%s: memory shortage\n", dev->name); + pr_warning("%s: memory shortage\n", dev->name); last_jif = jiffies; } if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) @@ -2598,7 +2594,7 @@ rx_oom_timer(unsigned long arg) if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */ boomerang_rx(dev); if (vortex_debug > 1) { - printk(KERN_DEBUG "%s: rx_oom_timer %s\n", dev->name, + pr_debug("%s: rx_oom_timer %s\n", dev->name, ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying"); } spin_unlock_irq(&vp->lock); @@ -2655,9 +2651,9 @@ vortex_close(struct net_device *dev) vortex_down(dev, 1); if (vortex_debug > 1) { - printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n", + pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n", dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus)); - printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d" + pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d" " tx_queued %d Rx pre-checksummed %d.\n", dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits); } @@ -2666,8 +2662,7 @@ vortex_close(struct net_device *dev) if (vp->rx_csumhits && (vp->drv_flags & HAS_HWCKSM) == 0 && (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) { - printk(KERN_WARNING "%s supports hardware checksums, and we're " - "not using them!\n", dev->name); + pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name); } #endif @@ -2717,16 +2712,16 @@ dump_tx_ring(struct net_device *dev) int i; int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */ - printk(KERN_ERR " Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", + pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", vp->full_bus_master_tx, vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE, vp->cur_tx, vp->cur_tx % TX_RING_SIZE); - printk(KERN_ERR " Transmit list %8.8x vs. %p.\n", + pr_err(" Transmit list %8.8x vs. %p.\n", ioread32(ioaddr + DownListPtr), &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]); issue_and_wait(dev, DownStall); for (i = 0; i < TX_RING_SIZE; i++) { - printk(KERN_ERR " %d: @%p length %8.8x status %8.8x\n", i, + pr_err(" %d: @%p length %8.8x status %8.8x\n", i, &vp->tx_ring[i], #if DO_ZEROCOPY le32_to_cpu(vp->tx_ring[i].frag[0].length), @@ -2970,7 +2965,7 @@ static void set_rx_mode(struct net_device *dev) if (dev->flags & IFF_PROMISC) { if (vortex_debug > 3) - printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name); + pr_notice("%s: Setting promiscuous mode.\n", dev->name); new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm; } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) { new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; @@ -3145,8 +3140,7 @@ static void acpi_set_WOL(struct net_device *dev) iowrite16(RxEnable, ioaddr + EL3_CMD); if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) { - printk(KERN_INFO "%s: WOL not supported.\n", - pci_name(VORTEX_PCI(vp))); + pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp))); vp->enable_wol = 0; return; @@ -3164,7 +3158,7 @@ static void __devexit vortex_remove_one(struct pci_dev *pdev) struct vortex_private *vp; if (!dev) { - printk("vortex_remove_one called for Compaq device!\n"); + pr_err("vortex_remove_one called for Compaq device!\n"); BUG(); } |