diff options
333 files changed, 13855 insertions, 13631 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index b7f9d3b4bbf..72651f788f4 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched. When sending patches to Linus, always follow step #7. Large changes are not appropriate for mailing lists, and some -maintainers. If your patch, uncompressed, exceeds 40 kB in size, +maintainers. If your patch, uncompressed, exceeds 300 kB in size, it is preferred that you store your patch on an Internet-accessible server, and provide instead a URL (link) pointing to your patch. diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 18b5ec8cea4..bf4f4b7e11b 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -282,9 +282,16 @@ stripe=n Number of filesystem blocks that mballoc will try to use for allocation size and alignment. For RAID5/6 systems this should be the number of data disks * RAID chunk size in file system blocks. -delalloc (*) Deferring block allocation until write-out time. -nodelalloc Disable delayed allocation. Blocks are allocation - when data is copied from user to page cache. + +delalloc (*) Defer block allocation until just before ext4 + writes out the block(s) in question. This + allows ext4 to better allocation decisions + more efficiently. +nodelalloc Disable delayed allocation. Blocks are allocated + when the data is copied from userspace to the + page cache, either via the write(2) system call + or when an mmap'ed page which was previously + unallocated is written for the first time. max_batch_time=usec Maximum amount of time ext4 should wait for additional filesystem operations to be batch diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index b5aee7838a0..2c48f945546 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname> .............................................................................. File Content mb_groups details of multiblock allocator buddy cache of free blocks - mb_history multiblock allocation history .............................................................................. diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index b58b84b50fa..eed520fd0c8 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed winnt: emulate the Windows NT rule for display/create. mixed: emulate the Windows NT rule for display, emulate the Windows 95 rule for create. - Default setting is `lower'. + Default setting is `mixed'. tz=UTC -- Interpret timestamps as UTC rather than local time. This option disables the conversion of timestamps diff --git a/MAINTAINERS b/MAINTAINERS index c450f3abb8c..f8f9c4f5f7d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -741,23 +741,36 @@ M: Dirk Opfer <dirk@opfer-online.de> S: Maintained ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT -P: Marek Vasut -M: marek.vasut@gmail.com +M: Marek Vasut <marek.vasut@gmail.com> L: linux-arm-kernel@lists.infradead.org W: http://hackndev.com S: Maintained +F: arch/arm/mach-pxa/include/mach/palmtx.h +F: arch/arm/mach-pxa/palmtx.c +F: arch/arm/mach-pxa/include/mach/palmt5.h +F: arch/arm/mach-pxa/palmt5.c +F: arch/arm/mach-pxa/include/mach/palmld.h +F: arch/arm/mach-pxa/palmld.c +F: arch/arm/mach-pxa/include/mach/palmte2.h +F: arch/arm/mach-pxa/palmte2.c +F: arch/arm/mach-pxa/include/mach/palmtc.h +F: arch/arm/mach-pxa/palmtc.c ARM/PALM TREO 680 SUPPORT M: Tomas Cech <sleep_walker@suse.cz> L: linux-arm-kernel@lists.infradead.org W: http://hackndev.com S: Maintained +F: arch/arm/mach-pxa/include/mach/treo680.h +F: arch/arm/mach-pxa/treo680.c ARM/PALMZ72 SUPPORT M: Sergey Lapin <slapin@ossfans.org> L: linux-arm-kernel@lists.infradead.org W: http://hackndev.com S: Maintained +F: arch/arm/mach-pxa/include/mach/palmz72.h +F: arch/arm/mach-pxa/palmz72.c ARM/PLEB SUPPORT M: Peter Chubb <pleb@gelato.unsw.edu.au> diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c index 44ed20d4a38..cf81cbc5754 100644 --- a/arch/arm/mach-ns9xxx/clock.c +++ b/arch/arm/mach-ns9xxx/clock.c @@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file) return single_open(file, clk_debugfs_show, NULL); } -static struct file_operations clk_debugfs_operations = { +static const struct file_operations clk_debugfs_operations = { .open = clk_debugfs_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 4ef26faf083..e5dcdf764c9 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -38,7 +38,7 @@ static struct omap_id omap_ids[] __initdata = { { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, - { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000}, + { .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000}, { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000}, { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000}, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index bd57ec76dc5..efaf053eba8 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -54,7 +54,7 @@ #define TWL4030_MSECURE_GPIO 22 -static int sdp3430_keymap[] = { +static int board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), KEY(0, 2, KEY_A), @@ -88,11 +88,15 @@ static int sdp3430_keymap[] = { 0 }; +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + static struct twl4030_keypad_data sdp3430_kp_data = { + .keymap_data = &board_map_data, .rows = 5, .cols = 6, - .keymap = sdp3430_keymap, - .keymapsize = ARRAY_SIZE(sdp3430_keymap), .rep = 1, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ec6854cbdd9..d110a7fdfbd 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -80,7 +80,7 @@ static struct platform_device ldp_smsc911x_device = { }, }; -static int ldp_twl4030_keymap[] = { +static int board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3), @@ -101,11 +101,15 @@ static int ldp_twl4030_keymap[] = { 0 }; +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + static struct twl4030_keypad_data ldp_kp_twl4030_data = { + .keymap_data = &board_map_data, .rows = 6, .cols = 6, - .keymap = ldp_twl4030_keymap, - .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap), .rep = 1, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 500c9956876..70df6b4dbcd 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -139,8 +139,13 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_cfg_reg(AG9_34XX_GPIO23); + mmc[0].gpio_wp = 23; + } else { + omap_cfg_reg(AH8_34XX_GPIO29); + } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(AH8_34XX_GPIO29); mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d50b9be9058..e4ec0c59121 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -159,7 +159,7 @@ static struct twl4030_usb_data omap3evm_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static int omap3evm_keymap[] = { +static int board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), KEY(0, 2, KEY_A), @@ -178,11 +178,15 @@ static int omap3evm_keymap[] = { KEY(3, 3, KEY_P) }; +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + static struct twl4030_keypad_data omap3evm_kp_data = { + .keymap_data = &board_map_data, .rows = 4, .cols = 4, - .keymap = omap3evm_keymap, - .keymapsize = ARRAY_SIZE(omap3evm_keymap), .rep = 1, }; diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b43f6e36b6d..7f6bf8772af 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -133,7 +133,7 @@ static void __init pandora_keys_gpio_init(void) omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); } -static int pandora_keypad_map[] = { +static int board_keymap[] = { /* col, row, code */ KEY(0, 0, KEY_9), KEY(0, 1, KEY_0), @@ -180,11 +180,15 @@ static int pandora_keypad_map[] = { KEY(5, 2, KEY_FN), }; +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + static struct twl4030_keypad_data pandora_kp_data = { + .keymap_data = &board_map_data, .rows = 8, .cols = 6, - .keymap = pandora_keypad_map, - .keymapsize = ARRAY_SIZE(pandora_keypad_map), .rep = 1, }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e6e8290b782..b45ad312c58 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -36,7 +36,7 @@ #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 -static int rx51_keymap[] = { +static int board_keymap[] = { KEY(0, 0, KEY_Q), KEY(0, 1, KEY_W), KEY(0, 2, KEY_E), @@ -83,11 +83,15 @@ static int rx51_keymap[] = { KEY(0xff, 5, KEY_F10), }; +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + static struct twl4030_keypad_data rx51_kp_data = { + .keymap_data = &board_map_data, .rows = 8, .cols = 8, - .keymap = rx51_keymap, - .keymapsize = ARRAY_SIZE(rx51_keymap), .rep = 1, }; diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 324009edbd5..b7b32208ced 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -27,7 +27,7 @@ #include "mmc-twl4030.h" /* Zoom2 has Qwerty keyboard*/ -static int zoom2_twl4030_keymap[] = { +static int board_keymap[] = { KEY(0, 0, KEY_E), KEY(1, 0, KEY_R), KEY(2, 0, KEY_T), @@ -82,11 +82,15 @@ static int zoom2_twl4030_keymap[] = { 0 }; +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + static struct twl4030_keypad_data zoom2_kp_twl4030_data = { + .keymap_data = &board_map_data, .rows = 8, .cols = 8, - .keymap = zoom2_twl4030_keymap, - .keymapsize = ARRAY_SIZE(zoom2_twl4030_keymap), .rep = 1, }; diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c index e4ebd6d5313..4af76bb1003 100644 --- a/arch/arm/mach-omap2/cm4xxx.c +++ b/arch/arm/mach-omap2/cm4xxx.c @@ -22,7 +22,6 @@ #include <asm/atomic.h> #include "cm.h" -#include "cm-regbits-4xxx.h" /* XXX move this to cm.h */ /* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */ @@ -50,19 +49,7 @@ */ int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs) { - int i = 0; - u8 cm_id; - u16 prcm_mod_offs; - u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK; - - cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT; - prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK; - - while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs, - OMAP4_CM_CLKCTRL_DREG) & mask) != 0) && - (i++ < MAX_MODULE_READY_TIME)) - udelay(1); - - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + /* FIXME: Add clock manager related code */ + return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index bcfcfc7fdb9..faf7a1e0c52 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -355,29 +355,60 @@ static struct platform_device omap2_mcspi4 = { }; #endif -static void omap_init_mcspi(void) +#ifdef CONFIG_ARCH_OMAP4 +static inline void omap4_mcspi_fixup(void) { - if (cpu_is_omap44xx()) { - omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE; - omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff; - omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE; - omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff; - omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE; - omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff; - omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE; - omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff; - } - platform_device_register(&omap2_mcspi1); - platform_device_register(&omap2_mcspi2); + omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE; + omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff; + omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE; + omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff; + omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE; + omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff; + omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE; + omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff; +} +#else +static inline void omap4_mcspi_fixup(void) +{ +} +#endif + #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) - if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx()) - platform_device_register(&omap2_mcspi3); +static inline void omap2_mcspi3_init(void) +{ + platform_device_register(&omap2_mcspi3); +} +#else +static inline void omap2_mcspi3_init(void) +{ +} #endif + #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - if (cpu_is_omap343x() || cpu_is_omap44xx()) - platform_device_register(&omap2_mcspi4); +static inline void omap2_mcspi4_init(void) +{ + platform_device_register(&omap2_mcspi4); +} +#else +static inline void omap2_mcspi4_init(void) +{ +} #endif + +static void omap_init_mcspi(void) +{ + if (cpu_is_omap44xx()) + omap4_mcspi_fixup(); + + platform_device_register(&omap2_mcspi1); + platform_device_register(&omap2_mcspi2); + + if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx()) + omap2_mcspi3_init(); + + if (cpu_is_omap343x() || cpu_is_omap44xx()) + omap2_mcspi4_init(); } #else diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 7574b6f20e8..e3a3bad1d84 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -294,10 +294,10 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, else if (cpu_is_omap34xx()) hwmods = omap34xx_hwmods; - omap_hwmod_init(hwmods); - omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ /* The OPP tables have to be registered before a clk init */ + omap_hwmod_init(hwmods); + omap2_mux_init(); omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 2d9b5cc981c..4a0e1cd5c1f 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -79,7 +79,7 @@ static int omap2_iommu_enable(struct iommu *obj) l = iommu_read_reg(obj, MMU_SYSSTATUS); if (l & MMU_SYS_RESETDONE) break; - } while (time_after(jiffies, timeout)); + } while (!time_after(jiffies, timeout)); if (!(l & MMU_SYS_RESETDONE)) { dev_err(obj->dev, "can't take mmu out of reset\n"); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 6f71f3730c9..c035ad3426d 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -30,6 +30,14 @@ #define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u))) #define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1)) +/* SYSCONFIG: register bit definition */ +#define AUTOIDLE (1 << 0) +#define SOFTRESET (1 << 1) +#define SMARTIDLE (2 << 3) + +/* SYSSTATUS: register bit definition */ +#define RESETDONE (1 << 0) + #define MBOX_REG_SIZE 0x120 #define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) @@ -69,21 +77,33 @@ static inline void mbox_write_reg(u32 val, size_t ofs) /* Mailbox H/W preparations */ static int omap2_mbox_startup(struct omap_mbox *mbox) { - unsigned int l; + u32 l; + unsigned long timeout; mbox_ick_handle = clk_get(NULL, "mailboxes_ick"); if (IS_ERR(mbox_ick_handle)) { - printk("Could not get mailboxes_ick\n"); + pr_err("Can't get mailboxes_ick\n"); return -ENODEV; } clk_enable(mbox_ick_handle); + mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG); + timeout = jiffies + msecs_to_jiffies(20); + do { + l = mbox_read_reg(MAILBOX_SYSSTATUS); + if (l & RESETDONE) + break; + } while (!time_after(jiffies, timeout)); + + if (!(l & RESETDONE)) { + pr_err("Can't take mmu out of reset\n"); + return -ENODEV; + } + l = mbox_read_reg(MAILBOX_REVISION); pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - /* set smart-idle & autoidle */ - l = mbox_read_reg(MAILBOX_SYSCONFIG); - l |= 0x00000011; + l = SMARTIDLE | AUTOIDLE; mbox_write_reg(l, MAILBOX_SYSCONFIG); omap2_mbox_enable_irq(mbox, IRQ_RX); @@ -156,6 +176,9 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox, u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; mbox_write_reg(bit, p->irqstatus); + + /* Flush posted write for irq status to avoid spurious interrupts */ + mbox_read_reg(p->irqstatus); } static int omap2_mbox_is_irq(struct omap_mbox *mbox, diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 2daa595aaff..b5fac32aae7 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -460,6 +460,8 @@ MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, @@ -472,6 +474,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a529c77daa..ae2186892c8 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -110,7 +110,7 @@ static struct plat_serial8250_port serial_platform_data2[] = { .uartclk = OMAP24XX_BASE_BAUD * 16, }, { #ifdef CONFIG_ARCH_OMAP4 - .membase = IO_ADDRESS(OMAP_UART4_BASE), + .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), .mapbase = OMAP_UART4_BASE, .irq = 70, .flags = UPF_BOOT_AUTOCONF, @@ -126,7 +126,7 @@ static struct plat_serial8250_port serial_platform_data2[] = { #ifdef CONFIG_ARCH_OMAP4 static struct plat_serial8250_port serial_platform_data3[] = { { - .membase = IO_ADDRESS(OMAP_UART4_BASE), + .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), .mapbase = OMAP_UART4_BASE, .irq = 70, .flags = UPF_BOOT_AUTOCONF, @@ -579,7 +579,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { { .pdev = { .name = "serial8250", - .id = 3 + .id = 3, .dev = { .platform_data = serial_platform_data3, }, diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 693839c89ad..71ebd7fcfea 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = { #ifdef CONFIG_ARCH_OMAP850 static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index 45ea3ae3c99..d91b9be334f 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -10,6 +10,8 @@ #ifndef ASMARM_ARCH_KEYPAD_H #define ASMARM_ARCH_KEYPAD_H +#include <linux/input/matrix_keypad.h> + struct omap_kp_platform_data { int rows; int cols; @@ -35,9 +37,6 @@ struct omap_kp_platform_data { #define KEY_PERSISTENT 0x00800000 #define KEYNUM_MASK 0x00EFFFFF -#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) -#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ - KEY_PERSISTENT) #endif diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 98dfab651df..0f49d2d563d 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -840,12 +840,14 @@ enum omap34xx_index { */ AF26_34XX_GPIO0, AF22_34XX_GPIO9, + AG9_34XX_GPIO23, AH8_34XX_GPIO29, U8_34XX_GPIO54_OUT, U8_34XX_GPIO54_DOWN, L8_34XX_GPIO63, G25_34XX_GPIO86_OUT, AG4_34XX_GPIO134_OUT, + AF4_34XX_GPIO135_OUT, AE4_34XX_GPIO136_OUT, AF6_34XX_GPIO140_UP, AE6_34XX_GPIO141, diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 6fc52fcbdc0..57f7122a091 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -199,7 +199,8 @@ static void *vmap_sg(const struct sg_table *sgt) va += bytes; } - flush_cache_vmap(new->addr, new->addr + total); + flush_cache_vmap((unsigned long)new->addr, + (unsigned long)(new->addr + total)); return new->addr; err_out: @@ -390,7 +391,7 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va) } va_end = _va + PAGE_SIZE * i; - flush_cache_vmap(_va, va_end); + flush_cache_vmap((unsigned long)_va, (unsigned long)va_end); } static inline void sgtable_drain_vmalloc(struct sg_table *sgt) diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index 2d0852ac3b2..c2cef613968 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -2,8 +2,11 @@ #define _ARCH_MCI_H struct s3c24xx_mci_pdata { + unsigned int no_wprotect : 1; + unsigned int no_detect : 1; unsigned int wprotect_invert : 1; unsigned int detect_invert : 1; /* set => detect active high. */ + unsigned int use_dma : 1; unsigned int gpio_detect; unsigned int gpio_wprotect; diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 93635a766f9..1e60a92dd60 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -48,7 +48,7 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l return ret; } -static struct file_operations coreb_fops = { +static const struct file_operations coreb_fops = { .owner = THIS_MODULE, .ioctl = coreb_ioctl, }; diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 6cc1a0319a5..562b9a7feae 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -244,7 +244,7 @@ static unsigned sync_serial_prescale_shadow; #define NUMBER_OF_PORTS 2 -static struct file_operations sync_serial_fops = { +static const struct file_operations sync_serial_fops = { .owner = THIS_MODULE, .write = sync_serial_write, .read = sync_serial_read, diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c index fe1fde89388..d89ab80498e 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c @@ -855,7 +855,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) return 0; } -struct file_operations gpio_fops = { +static const struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h index 554f65b6cd3..394ee946015 100644 --- a/arch/m68k/include/asm/hardirq_mm.h +++ b/arch/m68k/include/asm/hardirq_mm.h @@ -1,8 +1,16 @@ #ifndef __M68K_HARDIRQ_H #define __M68K_HARDIRQ_H -#define HARDIRQ_BITS 8 +#include <linux/threads.h> +#include <linux/cache.h> + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; -#include <asm-generic/hardirq.h> +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 #endif diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 3ab6d80d150..19c1c82849f 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -175,7 +175,7 @@ static dbdev_tab_t dbdev_tab[] = { #define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) #ifdef CONFIG_PM -static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8]; +static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6]; #endif @@ -993,14 +993,13 @@ void au1xxx_dbdma_suspend(void) au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c); /* save channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) { + for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00); au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04); au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08); au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c); au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10); au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14); - au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18); /* halt channel */ au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00); @@ -1027,14 +1026,13 @@ void au1xxx_dbdma_resume(void) au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c); /* restore channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) { + for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00); au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04); au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08); au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c); au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10); au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14); - au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18); au_sync(); addr += 0x100; /* next channel base */ } diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c index dfbfd7e2ac0..938b1d0b765 100644 --- a/arch/mips/basler/excite/excite_iodev.c +++ b/arch/mips/basler/excite/excite_iodev.c @@ -112,10 +112,8 @@ static int iodev_open(struct inode *i, struct file *f) { int ret; - lock_kernel(); ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, iodev_name, &miscdev); - unlock_kernel(); return ret; } diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile index aaa585cf26e..c146d1edede 100644 --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile @@ -1,5 +1,5 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o + dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-y += boards/ diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index fd77f548207..78e155d21be 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -20,10 +20,11 @@ #include <bcm63xx_cpu.h> #include <bcm63xx_regs.h> #include <bcm63xx_io.h> -#include <bcm63xx_board.h> #include <bcm63xx_dev_pci.h> #include <bcm63xx_dev_enet.h> #include <bcm63xx_dev_dsp.h> +#include <bcm63xx_dev_pcmcia.h> +#include <bcm63xx_dev_uart.h> #include <board_bcm963xx.h> #define PFX "board_bcm963xx: " @@ -793,6 +794,11 @@ int __init board_register_devices(void) { u32 val; + bcm63xx_uart_register(); + + if (board.has_pccard) + bcm63xx_pcmcia_register(); + if (board.has_enet0 && !board_get_mac_address(board.enet0.mac_addr)) bcm63xx_enet_register(0, &board.enet0); diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c new file mode 100644 index 00000000000..de4d917fd54 --- /dev/null +++ b/arch/mips/bcm63xx/dev-pcmcia.c @@ -0,0 +1,144 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/bootinfo.h> +#include <linux/platform_device.h> +#include <bcm63xx_cs.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_dev_pcmcia.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static struct resource pcmcia_resources[] = { + /* pcmcia registers */ + { + /* start & end filled at runtime */ + .flags = IORESOURCE_MEM, + }, + + /* pcmcia memory zone resources */ + { + .start = BCM_PCMCIA_COMMON_BASE_PA, + .end = BCM_PCMCIA_COMMON_END_PA, + .flags = IORESOURCE_MEM, + }, + { + .start = BCM_PCMCIA_ATTR_BASE_PA, + .end = BCM_PCMCIA_ATTR_END_PA, + .flags = IORESOURCE_MEM, + }, + { + .start = BCM_PCMCIA_IO_BASE_PA, + .end = BCM_PCMCIA_IO_END_PA, + .flags = IORESOURCE_MEM, + }, + + /* PCMCIA irq */ + { + /* start filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + + /* declare PCMCIA IO resource also */ + { + .start = BCM_PCMCIA_IO_BASE_PA, + .end = BCM_PCMCIA_IO_END_PA, + .flags = IORESOURCE_IO, + }, +}; + +static struct bcm63xx_pcmcia_platform_data pd; + +static struct platform_device bcm63xx_pcmcia_device = { + .name = "bcm63xx_pcmcia", + .id = 0, + .num_resources = ARRAY_SIZE(pcmcia_resources), + .resource = pcmcia_resources, + .dev = { + .platform_data = &pd, + }, +}; + +static int __init config_pcmcia_cs(unsigned int cs, + u32 base, unsigned int size) +{ + int ret; + + ret = bcm63xx_set_cs_status(cs, 0); + if (!ret) + ret = bcm63xx_set_cs_base(cs, base, size); + if (!ret) + ret = bcm63xx_set_cs_status(cs, 1); + return ret; +} + +static const __initdata struct { + unsigned int cs; + unsigned int base; + unsigned int size; +} pcmcia_cs[3] = { + { + .cs = MPI_CS_PCMCIA_COMMON, + .base = BCM_PCMCIA_COMMON_BASE_PA, + .size = BCM_PCMCIA_COMMON_SIZE + }, + { + .cs = MPI_CS_PCMCIA_ATTR, + .base = BCM_PCMCIA_ATTR_BASE_PA, + .size = BCM_PCMCIA_ATTR_SIZE + }, + { + .cs = MPI_CS_PCMCIA_IO, + .base = BCM_PCMCIA_IO_BASE_PA, + .size = BCM_PCMCIA_IO_SIZE + }, +}; + +int __init bcm63xx_pcmcia_register(void) +{ + int ret, i; + + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + return 0; + + /* use correct pcmcia ready gpio depending on processor */ + switch (bcm63xx_get_cpu_id()) { + case BCM6348_CPU_ID: + pd.ready_gpio = 22; + break; + + case BCM6358_CPU_ID: + pd.ready_gpio = 18; + break; + + default: + return -ENODEV; + } + + pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA); + pcmcia_resources[0].end = pcmcia_resources[0].start + + RSET_PCMCIA_SIZE - 1; + pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA); + + /* configure pcmcia chip selects */ + for (i = 0; i < 3; i++) { + ret = config_pcmcia_cs(pcmcia_cs[i].cs, + pcmcia_cs[i].base, + pcmcia_cs[i].size); + if (ret) + goto out_err; + } + + return platform_device_register(&bcm63xx_pcmcia_device); + +out_err: + printk(KERN_ERR "unable to set pcmcia chip select\n"); + return ret; +} diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c new file mode 100644 index 00000000000..5f3d89c4a98 --- /dev/null +++ b/arch/mips/bcm63xx/dev-uart.c @@ -0,0 +1,41 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_dev_uart.h> + +static struct resource uart_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bcm63xx_uart_device = { + .name = "bcm63xx_uart", + .id = 0, + .num_resources = ARRAY_SIZE(uart_resources), + .resource = uart_resources, +}; + +int __init bcm63xx_uart_register(void) +{ + uart_resources[0].start = bcm63xx_regset_address(RSET_UART0); + uart_resources[0].end = uart_resources[0].start; + uart_resources[0].end += RSET_UART_SIZE - 1; + uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); + return platform_device_register(&bcm63xx_uart_device); +} diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h new file mode 100644 index 00000000000..2beb3969ce3 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h @@ -0,0 +1,13 @@ +#ifndef BCM63XX_DEV_PCMCIA_H_ +#define BCM63XX_DEV_PCMCIA_H_ + +/* + * PCMCIA driver platform data + */ +struct bcm63xx_pcmcia_platform_data { + unsigned int ready_gpio; +}; + +int bcm63xx_pcmcia_register(void); + +#endif /* BCM63XX_DEV_PCMCIA_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h new file mode 100644 index 00000000000..bf348f573bb --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h @@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_UART_H_ +#define BCM63XX_DEV_UART_H_ + +int bcm63xx_uart_register(void); + +#endif /* BCM63XX_DEV_UART_H_ */ diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index e15f11a0931..af42385245d 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -77,7 +77,18 @@ extern void play_dead(void); extern asmlinkage void smp_call_function_interrupt(void); -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +static inline void arch_send_call_function_single_ipi(int cpu) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION); +} + +static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); +} #endif /* __ASM_SMP_H */ diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h index 79240494857..42f66c31147 100644 --- a/arch/mips/include/asm/unaligned.h +++ b/arch/mips/include/asm/unaligned.h @@ -12,17 +12,17 @@ #if defined(__MIPSEB__) # include <linux/unaligned/be_struct.h> # include <linux/unaligned/le_byteshift.h> -# include <linux/unaligned/generic.h> # define get_unaligned __get_unaligned_be # define put_unaligned __put_unaligned_be #elif defined(__MIPSEL__) # include <linux/unaligned/le_struct.h> # include <linux/unaligned/be_byteshift.h> -# include <linux/unaligned/generic.h> # define get_unaligned __get_unaligned_le # define put_unaligned __put_unaligned_le #else # error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" #endif +# include <linux/unaligned/generic.h> + #endif /* _ASM_MIPS_UNALIGNED_H */ diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index f2397f00db4..ad4e017ed2f 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -172,13 +172,20 @@ static unsigned int translate_open_flags(int flags) } -static void sp_setfsuidgid( uid_t uid, gid_t gid) +static int sp_setfsuidgid(uid_t uid, gid_t gid) { - current->cred->fsuid = uid; - current->cred->fsgid = gid; + struct cred *new; - key_fsuid_changed(current); - key_fsgid_changed(current); + new = prepare_creds(); + if (!new) + return -ENOMEM; + + new->fsuid = uid; + new->fsgid = gid; + + commit_creds(new); + + return 0; } /* @@ -196,7 +203,7 @@ void sp_work_handle_request(void) mm_segment_t old_fs; struct timeval tv; struct timezone tz; - int cmd; + int err, cmd; char *vcwd; int size; @@ -225,8 +232,11 @@ void sp_work_handle_request(void) /* Run the syscall at the privilege of the user who loaded the SP program */ - if (vpe_getuid(tclimit)) - sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit)); + if (vpe_getuid(tclimit)) { + err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit)); + if (!err) + pr_err("Change of creds failed\n"); + } switch (sc.cmd) { /* needs the flags argument translating from SDE kit to @@ -283,8 +293,11 @@ void sp_work_handle_request(void) break; } /* switch */ - if (vpe_getuid(tclimit)) - sp_setfsuidgid( 0, 0); + if (vpe_getuid(tclimit)) { + err = sp_setfsuidgid(0, 0); + if (!err) + pr_err("restoring old creds failed\n"); + } old_fs = get_fs(); set_fs(KERNEL_DS); diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index a10ebfdc28a..364f066cb49 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -72,8 +72,9 @@ static void rtlx_dispatch(void) */ static irqreturn_t rtlx_interrupt(int irq, void *dev_id) { + unsigned int vpeflags; + unsigned long flags; int i; - unsigned int flags, vpeflags; /* Ought not to be strictly necessary for SMTC builds */ local_irq_save(flags); @@ -392,20 +393,12 @@ out: static int file_open(struct inode *inode, struct file *filp) { - int minor = iminor(inode); - int err; - - lock_kernel(); - err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); - unlock_kernel(); - return err; + return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1); } static int file_release(struct inode *inode, struct file *filp) { - int minor = iminor(inode); - - return rtlx_release(minor); + return rtlx_release(iminor(inode)); } static unsigned int file_poll(struct file *file, poll_table * wait) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 4eb106c6a3e..e72e6844d13 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -32,7 +32,6 @@ #include <linux/cpumask.h> #include <linux/cpu.h> #include <linux/err.h> -#include <linux/smp.h> #include <asm/atomic.h> #include <asm/cpu.h> @@ -128,19 +127,6 @@ asmlinkage __cpuinit void start_secondary(void) cpu_idle(); } -void arch_send_call_function_ipi_mask(const struct cpumask *mask) -{ - mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); -} - -/* - * We reuse the same vector for the single IPI - */ -void arch_send_call_function_single_ipi(int cpu) -{ - mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION); -} - /* * Call into both interrupt handlers, as we share the IPI for them */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 67153a0dc26..4d181df44a4 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1098,9 +1098,8 @@ static void ipi_irq_dispatch(void) static struct irqaction irq_ipi = { .handler = ipi_interrupt, - .flags = IRQF_DISABLED, - .name = "SMTC_IPI", - .flags = IRQF_PERCPU + .flags = IRQF_DISABLED | IRQF_PERCPU, + .name = "SMTC_IPI" }; static void setup_cross_vpe_interrupts(unsigned int nvpe) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index eb6c4c5b7fb..03092ab2a29 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -144,14 +144,15 @@ struct tc { }; struct { - /* Virtual processing elements */ - struct list_head vpe_list; - - /* Thread contexts */ - struct list_head tc_list; + spinlock_t vpe_list_lock; + struct list_head vpe_list; /* Virtual processing elements */ + spinlock_t tc_list_lock; + struct list_head tc_list; /* Thread contexts */ } vpecontrol = { - .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list), - .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) + .vpe_list_lock = SPIN_LOCK_UNLOCKED, + .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list), + .tc_list_lock = SPIN_LOCK_UNLOCKED, + .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) }; static void release_progmem(void *ptr); @@ -159,28 +160,38 @@ static void release_progmem(void *ptr); /* get the vpe associated with this minor */ static struct vpe *get_vpe(int minor) { - struct vpe *v; + struct vpe *res, *v; if (!cpu_has_mipsmt) return NULL; + res = NULL; + spin_lock(&vpecontrol.vpe_list_lock); list_for_each_entry(v, &vpecontrol.vpe_list, list) { - if (v->minor == minor) - return v; + if (v->minor == minor) { + res = v; + break; + } } + spin_unlock(&vpecontrol.vpe_list_lock); - return NULL; + return res; } /* get the vpe associated with this minor */ static struct tc *get_tc(int index) { - struct tc *t; + struct tc *res, *t; + res = NULL; + spin_lock(&vpecontrol.tc_list_lock); list_for_each_entry(t, &vpecontrol.tc_list, list) { - if (t->index == index) - return t; + if (t->index == index) { + res = t; + break; + } } + spin_unlock(&vpecontrol.tc_list_lock); return NULL; } @@ -190,15 +201,17 @@ static struct vpe *alloc_vpe(int minor) { struct vpe *v; - if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { + if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) return NULL; - } INIT_LIST_HEAD(&v->tc); + spin_lock(&vpecontrol.vpe_list_lock); list_add_tail(&v->list, &vpecontrol.vpe_list); + spin_unlock(&vpecontrol.vpe_list_lock); INIT_LIST_HEAD(&v->notify); v->minor = minor; + return v; } @@ -212,7 +225,10 @@ static struct tc *alloc_tc(int index) INIT_LIST_HEAD(&tc->tc); tc->index = index; + + spin_lock(&vpecontrol.tc_list_lock); list_add_tail(&tc->list, &vpecontrol.tc_list); + spin_unlock(&vpecontrol.tc_list_lock); out: return tc; @@ -227,7 +243,7 @@ static void release_vpe(struct vpe *v) kfree(v); } -static void dump_mtregs(void) +static void __maybe_unused dump_mtregs(void) { unsigned long val; @@ -1048,20 +1064,19 @@ static int vpe_open(struct inode *inode, struct file *filp) enum vpe_state state; struct vpe_notifications *not; struct vpe *v; - int ret, err = 0; + int ret; - lock_kernel(); if (minor != iminor(inode)) { /* assume only 1 device at the moment. */ - printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); - err = -ENODEV; - goto out; + pr_warning("VPE loader: only vpe1 is supported\n"); + + return -ENODEV; } if ((v = get_vpe(tclimit)) == NULL) { - printk(KERN_WARNING "VPE loader: unable to get vpe\n"); - err = -ENODEV; - goto out; + pr_warning("VPE loader: unable to get vpe\n"); + + return -ENODEV; } state = xchg(&v->state, VPE_STATE_INUSE); @@ -1101,8 +1116,8 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; -out: unlock_kernel(); + return 0; } @@ -1594,14 +1609,14 @@ static void __exit vpe_module_exit(void) { struct vpe *v, *n; + device_del(&vpe_device); + unregister_chrdev(major, module_name); + + /* No locking needed here */ list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) { - if (v->state != VPE_STATE_UNUSED) { + if (v->state != VPE_STATE_UNUSED) release_vpe(v); - } } - - device_del(&vpe_device); - unregister_chrdev(major, module_name); } module_init(vpe_module_init); diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index b55c2d1b998..5ab5fa8c1d8 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -32,6 +32,11 @@ static void mips_sc_wback_inv(unsigned long addr, unsigned long size) */ static void mips_sc_inv(unsigned long addr, unsigned long size) { + unsigned long lsize = cpu_scache_line_size(); + unsigned long almask = ~(lsize - 1); + + cache_op(Hit_Writeback_Inv_SD, addr & almask); + cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask); blast_inv_scache_range(addr, addr + size); } diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index 655cb8dec34..deed1d5d498 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -44,7 +44,7 @@ static struct loongson2_register_config { unsigned int ctrl; unsigned long long reset_counter1; unsigned long long reset_counter2; - int cnt1_enalbed, cnt2_enalbed; + int cnt1_enabled, cnt2_enabled; } reg; DEFINE_SPINLOCK(sample_lock); @@ -81,8 +81,8 @@ static void loongson2_reg_setup(struct op_counter_config *cfg) reg.ctrl = ctrl; - reg.cnt1_enalbed = cfg[0].enabled; - reg.cnt2_enalbed = cfg[1].enabled; + reg.cnt1_enabled = cfg[0].enabled; + reg.cnt2_enabled = cfg[1].enabled; } @@ -99,7 +99,7 @@ static void loongson2_cpu_setup(void *args) static void loongson2_cpu_start(void *args) { /* Start all counters on current CPU */ - if (reg.cnt1_enalbed || reg.cnt2_enalbed) + if (reg.cnt1_enabled || reg.cnt2_enabled) write_c0_perfctrl(reg.ctrl); } @@ -125,7 +125,7 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) */ /* Check whether the irq belongs to me */ - enabled = reg.cnt1_enalbed | reg.cnt2_enalbed; + enabled = reg.cnt1_enabled | reg.cnt2_enabled; if (!enabled) return IRQ_NONE; @@ -136,12 +136,12 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) spin_lock_irqsave(&sample_lock, flags); if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) { - if (reg.cnt1_enalbed) + if (reg.cnt1_enabled) oprofile_add_sample(regs, 0); counter1 = reg.reset_counter1; } if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) { - if (reg.cnt2_enalbed) + if (reg.cnt2_enabled) oprofile_add_sample(regs, 1); counter2 = reg.reset_counter2; } diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c index 109c95ca698..32548b5d68d 100644 --- a/arch/mips/pci/ops-pmcmsp.c +++ b/arch/mips/pci/ops-pmcmsp.c @@ -385,6 +385,7 @@ int msp_pcibios_config_access(unsigned char access_type, unsigned long intr; unsigned long value; static char pciirqflag; + int ret; #if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) unsigned int vpe_status; #endif @@ -402,11 +403,13 @@ int msp_pcibios_config_access(unsigned char access_type, * allocation assigns an interrupt handler to the interrupt. */ if (pciirqflag == 0) { - request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ + ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ bpci_interrupt, IRQF_SHARED | IRQF_DISABLED, "PMC MSP PCI Host", preg); + if (ret != 0) + return ret; pciirqflag = ~0; } diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 9aa8f2951df..c6851df9ab7 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -165,7 +165,7 @@ static void ip27_send_ipi_single(int destid, unsigned int action) REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq); } -static void ip27_send_ipi(const struct cpumask *mask, unsigned int action) +static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action) { unsigned int i; diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index ba59839a021..4070268aa76 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -117,10 +117,6 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) unsigned long flags; unsigned int irq_dirty; - if (cpumask_weight(mask) != 1) { - printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); - return -1; - } i = cpumask_first(mask); /* Convert logical CPU to physical CPU */ diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index 637a194e5cd..15ea778b5e6 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -403,36 +403,31 @@ static int sbprof_zbprof_stop(void) static int sbprof_tb_open(struct inode *inode, struct file *filp) { int minor; - int err = 0; - lock_kernel(); minor = iminor(inode); - if (minor != 0) { - err = -ENODEV; - goto out; - } + if (minor != 0) + return -ENODEV; - if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) { - err = -EBUSY; - goto out; - } + if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) + return -EBUSY; memset(&sbp, 0, sizeof(struct sbprof_tb)); sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); if (!sbp.sbprof_tbbuf) { - err = -ENOMEM; - goto out; + sbp.open = SB_CLOSED; + wmb(); + return -ENOMEM; } + memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_read); mutex_init(&sbp.lock); sbp.open = SB_OPEN; + wmb(); - out: - unlock_kernel(); - return err; + return 0; } static int sbprof_tb_release(struct inode *inode, struct file *filp) @@ -440,7 +435,7 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp) int minor; minor = iminor(inode); - if (minor != 0 || !sbp.open) + if (minor != 0 || sbp.open != SB_CLOSED) return -ENODEV; mutex_lock(&sbp.lock); @@ -449,7 +444,8 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp) sbprof_zbprof_stop(); vfree(sbp.sbprof_tbbuf); - sbp.open = 0; + sbp.open = SB_CLOSED; + wmb(); mutex_unlock(&sbp.lock); @@ -583,7 +579,8 @@ static int __init sbprof_tb_init(void) } tb_dev = dev; - sbp.open = 0; + sbp.open = SB_CLOSED; + wmb(); tb_period = zbbus_mhz * 10000LL; pr_info(DEVNAME ": initialized - tb_period = %lld\n", (long long) tb_period); diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 623ffc933c4..5277aac96b0 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -106,7 +106,7 @@ void read_persistent_clock(struct timespec *ts) break; } ts->tv_sec = sec; - tv->tv_nsec = 0; + ts->tv_nsec = 0; } int rtc_mips_set_time(unsigned long sec) diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 8a3a4dd5576..167e10ff06d 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -129,42 +129,47 @@ extern int fixup_exception(struct pt_regs *regs); struct __large_struct { unsigned long buf[100]; }; #define __m(x) (*(struct __large_struct *)(x)) -#define __get_user_nocheck(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ +#define __get_user_nocheck(x, ptr, size) \ +({ \ + unsigned long __gu_addr; \ + int __gu_err; \ + __gu_addr = (unsigned long) (ptr); \ + switch (size) { \ + case 1: { \ + unsigned char __gu_val; \ + __get_user_asm("bu"); \ + (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ + break; \ + } \ + case 2: { \ + unsigned short __gu_val; \ + __get_user_asm("hu"); \ + (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ + break; \ + } \ + case 4: { \ + unsigned int __gu_val; \ + __get_user_asm(""); \ + (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ + break; \ + } \ + default: \ + __get_user_unknown(); \ + break; \ + } \ + __gu_err; \ }) -#define __get_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__gu_addr,size))) { \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - } \ - else { \ - __gu_err = -EFAULT; \ - __gu_val = 0; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ +#define __get_user_check(x, ptr, size) \ +({ \ + int _e; \ + if (likely(__access_ok((unsigned long) (ptr), (size)))) \ + _e = __get_user_nocheck((x), (ptr), (size)); \ + else { \ + _e = -EFAULT; \ + (x) = (__typeof__(x))0; \ + } \ + _e; \ }) #define __get_user_asm(INSN) \ diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h index 8b450e920af..2a0bf79ab96 100644 --- a/arch/mn10300/unit-asb2303/include/unit/clock.h +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ extern unsigned long mn10300_iobclk; extern unsigned long mn10300_tsc_per_HZ; -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +#define MN10300_IOCLK mn10300_ioclk /* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ +/* #define MN10300_IOBCLK mn10300_iobclk */ #else /* !CONFIG_MN10300_RTC */ @@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ; #define MN10300_TSCCLK MN10300_IOCLK #ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ #else /* !CONFIG_MN10300_RTC */ #define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) #endif /* !CONFIG_MN10300_RTC */ diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h index 7d514841ffd..67be3f2eb18 100644 --- a/arch/mn10300/unit-asb2305/include/unit/clock.h +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ extern unsigned long mn10300_iobclk; extern unsigned long mn10300_tsc_per_HZ; -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +#define MN10300_IOCLK mn10300_ioclk /* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ +/* #define MN10300_IOBCLK mn10300_iobclk */ #else /* !CONFIG_MN10300_RTC */ @@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ; #define MN10300_TSCCLK MN10300_IOCLK #ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ #else /* !CONFIG_MN10300_RTC */ #define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) #endif /* !CONFIG_MN10300_RTC */ diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c index 47ee603f558..2aa371e3007 100644 --- a/arch/powerpc/kvm/timing.c +++ b/arch/powerpc/kvm/timing.c @@ -201,7 +201,7 @@ static int kvmppc_exit_timing_open(struct inode *inode, struct file *file) return single_open(file, kvmppc_exit_timing_show, inode->i_private); } -static struct file_operations kvmppc_exit_timing_fops = { +static const struct file_operations kvmppc_exit_timing_fops = { .owner = THIS_MODULE, .open = kvmppc_exit_timing_open, .read = seq_read, diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 96130944617..884e8bcec49 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -147,7 +147,7 @@ static int __fops ## _open(struct inode *inode, struct file *file) \ __simple_attr_check_format(__fmt, 0ull); \ return spufs_attr_open(inode, file, __get, __set, __fmt); \ } \ -static struct file_operations __fops = { \ +static const struct file_operations __fops = { \ .owner = THIS_MODULE, \ .open = __fops ## _open, \ .release = spufs_attr_release, \ diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index ab69925d579..937a544a236 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -209,7 +209,7 @@ static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len, return n_read * sizeof(struct dtl_entry); } -static struct file_operations dtl_fops = { +static const struct file_operations dtl_fops = { .open = dtl_file_open, .release = dtl_file_release, .read = dtl_file_read, diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 97fca4695e0..ac45aab741a 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -102,6 +102,9 @@ config HAVE_SETUP_PER_CPU_AREA config NEED_PER_CPU_EMBED_FIRST_CHUNK def_bool y if SPARC64 +config NEED_PER_CPU_PAGE_FIRST_CHUNK + def_bool y if SPARC64 + config GENERIC_HARDIRQS_NO__DO_IRQ bool def_bool y if SPARC64 diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index ff68373ce6d..aa36223497b 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1420,7 +1420,7 @@ static void __init pcpu_free_bootmem(void *ptr, size_t size) free_bootmem(__pa(ptr), size); } -static int pcpu_cpu_distance(unsigned int from, unsigned int to) +static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) { if (cpu_to_node(from) == cpu_to_node(to)) return LOCAL_DISTANCE; @@ -1428,18 +1428,53 @@ static int pcpu_cpu_distance(unsigned int from, unsigned int to) return REMOTE_DISTANCE; } +static void __init pcpu_populate_pte(unsigned long addr) +{ + pgd_t *pgd = pgd_offset_k(addr); + pud_t *pud; + pmd_t *pmd; + + pud = pud_offset(pgd, addr); + if (pud_none(*pud)) { + pmd_t *new; + + new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE); + pud_populate(&init_mm, pud, new); + } + + pmd = pmd_offset(pud, addr); + if (!pmd_present(*pmd)) { + pte_t *new; + + new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE); + pmd_populate_kernel(&init_mm, pmd, new); + } +} + void __init setup_per_cpu_areas(void) { unsigned long delta; unsigned int cpu; - int rc; - - rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, - PERCPU_DYNAMIC_RESERVE, 4 << 20, - pcpu_cpu_distance, pcpu_alloc_bootmem, - pcpu_free_bootmem); - if (rc) - panic("failed to initialize first chunk (%d)", rc); + int rc = -EINVAL; + + if (pcpu_chosen_fc != PCPU_FC_PAGE) { + rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, + PERCPU_DYNAMIC_RESERVE, 4 << 20, + pcpu_cpu_distance, + pcpu_alloc_bootmem, + pcpu_free_bootmem); + if (rc) + pr_warning("PERCPU: %s allocator failed (%d), " + "falling back to page size\n", + pcpu_fc_names[pcpu_chosen_fc], rc); + } + if (rc < 0) + rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, + pcpu_alloc_bootmem, + pcpu_free_bootmem, + pcpu_populate_pte); + if (rc < 0) + panic("cannot initialize percpu area (err=%d)", rc); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; for_each_possible_cpu(cpu) diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h index 7c5ef8b14d9..46fc474fd81 100644 --- a/arch/x86/include/asm/checksum_32.h +++ b/arch/x86/include/asm/checksum_32.h @@ -161,7 +161,8 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, "adcl $0, %0 ;\n" : "=&r" (sum) : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)); + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "memory"); return csum_fold(sum); } diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h index 82ceb788a98..ee1931be659 100644 --- a/arch/x86/include/asm/cmpxchg_32.h +++ b/arch/x86/include/asm/cmpxchg_32.h @@ -312,19 +312,23 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old, extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64); -#define cmpxchg64(ptr, o, n) \ -({ \ - __typeof__(*(ptr)) __ret; \ - if (likely(boot_cpu_data.x86 > 4)) \ - __ret = (__typeof__(*(ptr)))__cmpxchg64((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n)); \ - else \ - __ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n)); \ - __ret; \ -}) +#define cmpxchg64(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) __ret; \ + __typeof__(*(ptr)) __old = (o); \ + __typeof__(*(ptr)) __new = (n); \ + alternative_io("call cmpxchg8b_emu", \ + "lock; cmpxchg8b (%%esi)" , \ + X86_FEATURE_CX8, \ + "=A" (__ret), \ + "S" ((ptr)), "0" (__old), \ + "b" ((unsigned int)__new), \ + "c" ((unsigned int)(__new>>32)) \ + : "memory"); \ + __ret; }) + + + #define cmpxchg64_local(ptr, o, n) \ ({ \ __typeof__(*(ptr)) __ret; \ diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 4b2af86e3e8..183c3457d2f 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -204,10 +204,7 @@ static void print_mce_head(void) static void print_mce_tail(void) { printk(KERN_EMERG "This is not a software problem!\n" -#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD)) - "Run through mcelog --ascii to decode and contact your hardware vendor\n" -#endif - ); + "Run through mcelog --ascii to decode and contact your hardware vendor\n"); } #define PANIC_TIMEOUT 5 /* 5 seconds */ diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c index 43cec6bdda6..1736c5a725a 100644 --- a/arch/x86/kernel/i386_ksyms_32.c +++ b/arch/x86/kernel/i386_ksyms_32.c @@ -10,6 +10,14 @@ EXPORT_SYMBOL(mcount); #endif +/* + * Note, this is a prototype to get at the symbol for + * the export, but dont use it from C code, it is used + * by assembly code and is not using C calling convention! + */ +extern void cmpxchg8b_emu(void); +EXPORT_SYMBOL(cmpxchg8b_emu); + /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 9e609206fac..3e549b8ec8c 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -15,7 +15,7 @@ ifeq ($(CONFIG_X86_32),y) obj-y += atomic64_32.o lib-y += checksum_32.o lib-y += strstr_32.o - lib-y += semaphore_32.o string_32.o + lib-y += semaphore_32.o string_32.o cmpxchg8b_emu.o lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o else diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S new file mode 100644 index 00000000000..828cb710dec --- /dev/null +++ b/arch/x86/lib/cmpxchg8b_emu.S @@ -0,0 +1,57 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + */ + +#include <linux/linkage.h> +#include <asm/alternative-asm.h> +#include <asm/frame.h> +#include <asm/dwarf2.h> + + +.text + +/* + * Inputs: + * %esi : memory location to compare + * %eax : low 32 bits of old value + * %edx : high 32 bits of old value + * %ebx : low 32 bits of new value + * %ecx : high 32 bits of new value + */ +ENTRY(cmpxchg8b_emu) +CFI_STARTPROC + +# +# Emulate 'cmpxchg8b (%esi)' on UP except we don't +# set the whole ZF thing (caller will just compare +# eax:edx with the expected value) +# +cmpxchg8b_emu: + pushfl + cli + + cmpl (%esi), %eax + jne not_same + cmpl 4(%esi), %edx + jne half_same + + movl %ebx, (%esi) + movl %ecx, 4(%esi) + + popfl + ret + + not_same: + movl (%esi), %eax + half_same: + movl 4(%esi), %edx + + popfl + ret + +CFI_ENDPROC +ENDPROC(cmpxchg8b_emu) diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c index b53225d2cac..e133ce25e29 100644 --- a/arch/x86/xen/debugfs.c +++ b/arch/x86/xen/debugfs.c @@ -100,7 +100,7 @@ static int xen_array_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations u32_array_fops = { +static const struct file_operations u32_array_fops = { .owner = THIS_MODULE, .open = u32_array_open, .release= xen_array_release, diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a4fddb24476..f6e54bf8dd9 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -285,7 +285,7 @@ static int acpi_video_device_brightness_open_fs(struct inode *inode, struct file *file); static ssize_t acpi_video_device_write_brightness(struct file *file, const char __user *buffer, size_t count, loff_t *data); -static struct file_operations acpi_video_device_brightness_fops = { +static const struct file_operations acpi_video_device_brightness_fops = { .owner = THIS_MODULE, .open = acpi_video_device_brightness_open_fs, .read = seq_read, diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index 703364b5217..66e181345b3 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -1306,14 +1306,6 @@ static void amb_close (struct atm_vcc * atm_vcc) { return; } -/********** Set socket options for a VC **********/ - -// int amb_getsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen); - -/********** Set socket options for a VC **********/ - -// int amb_setsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen); - /********** Send **********/ static int amb_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) { diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index 5503bfc8e13..0c302614544 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -2031,7 +2031,7 @@ static int eni_getsockopt(struct atm_vcc *vcc,int level,int optname, static int eni_setsockopt(struct atm_vcc *vcc,int level,int optname, - void __user *optval,int optlen) + void __user *optval,unsigned int optlen) { return -EINVAL; } diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index b119640e1ee..cd5049af47a 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1244,7 +1244,7 @@ static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname, static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname, - void __user *optval,int optlen) + void __user *optval,unsigned int optlen) { func_enter (); func_exit (); diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 10f000dbe44..f766cc46b4c 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -1795,7 +1795,7 @@ fore200e_getsockopt(struct atm_vcc* vcc, int level, int optname, void __user *op static int -fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen) +fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, unsigned int optlen) { /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */ diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 29e66d603d3..70667033a56 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -921,9 +921,9 @@ out_free_rbpq_base: he_dev->rbrq_phys); i = CONFIG_RBPL_SIZE; out_free_rbpl_virt: - while (--i) - pci_pool_free(he_dev->rbps_pool, he_dev->rbpl_virt[i].virt, - he_dev->rbps_base[i].phys); + while (i--) + pci_pool_free(he_dev->rbpl_pool, he_dev->rbpl_virt[i].virt, + he_dev->rbpl_base[i].phys); kfree(he_dev->rbpl_virt); out_free_rbpl_base: @@ -933,11 +933,11 @@ out_free_rbpl_base: out_destroy_rbpl_pool: pci_pool_destroy(he_dev->rbpl_pool); - i = CONFIG_RBPL_SIZE; + i = CONFIG_RBPS_SIZE; out_free_rbps_virt: - while (--i) - pci_pool_free(he_dev->rbpl_pool, he_dev->rbps_virt[i].virt, - he_dev->rbpl_base[i].phys); + while (i--) + pci_pool_free(he_dev->rbps_pool, he_dev->rbps_virt[i].virt, + he_dev->rbps_base[i].phys); kfree(he_dev->rbps_virt); out_free_rbps_base: diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 01ce241dbea..4e49021e67e 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -2590,7 +2590,7 @@ static int hrz_getsockopt (struct atm_vcc * atm_vcc, int level, int optname, } static int hrz_setsockopt (struct atm_vcc * atm_vcc, int level, int optname, - void *optval, int optlen) { + void *optval, unsigned int optlen) { hrz_dev * dev = HRZ_DEV(atm_vcc->dev); PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt"); switch (level) { diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 78c9736c357..b2c1b37ab2e 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2862,7 +2862,7 @@ static int ia_getsockopt(struct atm_vcc *vcc, int level, int optname, } static int ia_setsockopt(struct atm_vcc *vcc, int level, int optname, - void __user *optval, int optlen) + void __user *optval, unsigned int optlen) { IF_EVENT(printk(">ia_setsockopt\n");) return -EINVAL; diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index 752b1ba81f7..2e9635be048 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -1517,7 +1517,7 @@ static int zatm_getsockopt(struct atm_vcc *vcc,int level,int optname, static int zatm_setsockopt(struct atm_vcc *vcc,int level,int optname, - void __user *optval,int optlen) + void __user *optval,unsigned int optlen) { return -EINVAL; } diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 24c3e21ab26..1ece0b47b58 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -426,7 +426,7 @@ out: return err; } -static struct file_operations cciss_proc_fops = { +static const struct file_operations cciss_proc_fops = { .owner = THIS_MODULE, .open = cciss_seq_open, .read = seq_read, diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index aaca40283be..4f568cb9af3 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -393,7 +393,7 @@ static int apm_open(struct inode * inode, struct file * filp) return as ? 0 : -ENOMEM; } -static struct file_operations apm_bios_fops = { +static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = apm_read, .poll = apm_poll, diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c index e3dd24bff51..836d4f0a876 100644 --- a/drivers/char/bfin-otp.c +++ b/drivers/char/bfin-otp.c @@ -217,7 +217,7 @@ static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg) # define bfin_otp_ioctl NULL #endif -static struct file_operations bfin_otp_fops = { +static const struct file_operations bfin_otp_fops = { .owner = THIS_MODULE, .unlocked_ioctl = bfin_otp_ioctl, .read = bfin_otp_read, diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index df5038bbcbc..4254457d391 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -3354,7 +3354,7 @@ static int __init cy_detect_isa(void) continue; } #ifdef MODULE - if (isparam && irq[i]) + if (isparam && i < NR_CARDS && irq[i]) cy_isa_irq = irq[i]; else #endif diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 00dd3de1be5..06aad0831c7 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -116,7 +116,7 @@ static int __devinit omap_rng_probe(struct platform_device *pdev) if (!res) return -ENOENT; - mem = request_mem_region(res->start, res->end - res->start + 1, + mem = request_mem_region(res->start, resource_size(res), pdev->name); if (mem == NULL) { ret = -EBUSY; @@ -124,7 +124,7 @@ static int __devinit omap_rng_probe(struct platform_device *pdev) } dev_set_drvdata(&pdev->dev, mem); - rng_base = ioremap(res->start, res->end - res->start + 1); + rng_base = ioremap(res->start, resource_size(res)); if (!rng_base) { ret = -ENOMEM; goto err_ioremap; diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 53761cefa91..e066c4fdf81 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -261,6 +261,9 @@ done: return 0; } +/* Traditional BSD devices */ +#ifdef CONFIG_LEGACY_PTYS + static int pty_install(struct tty_driver *driver, struct tty_struct *tty) { struct tty_struct *o_tty; @@ -310,24 +313,6 @@ free_mem_out: return -ENOMEM; } - -static const struct tty_operations pty_ops = { - .install = pty_install, - .open = pty_open, - .close = pty_close, - .write = pty_write, - .write_room = pty_write_room, - .flush_buffer = pty_flush_buffer, - .chars_in_buffer = pty_chars_in_buffer, - .unthrottle = pty_unthrottle, - .set_termios = pty_set_termios, - .resize = pty_resize -}; - -/* Traditional BSD devices */ -#ifdef CONFIG_LEGACY_PTYS -static struct tty_driver *pty_driver, *pty_slave_driver; - static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { @@ -341,7 +326,12 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file, static int legacy_count = CONFIG_LEGACY_PTY_COUNT; module_param(legacy_count, int, 0); -static const struct tty_operations pty_ops_bsd = { +/* + * The master side of a pty can do TIOCSPTLCK and thus + * has pty_bsd_ioctl. + */ +static const struct tty_operations master_pty_ops_bsd = { + .install = pty_install, .open = pty_open, .close = pty_close, .write = pty_write, @@ -354,8 +344,23 @@ static const struct tty_operations pty_ops_bsd = { .resize = pty_resize }; +static const struct tty_operations slave_pty_ops_bsd = { + .install = pty_install, + .open = pty_open, + .close = pty_close, + .write = pty_write, + .write_room = pty_write_room, + .flush_buffer = pty_flush_buffer, + .chars_in_buffer = pty_chars_in_buffer, + .unthrottle = pty_unthrottle, + .set_termios = pty_set_termios, + .resize = pty_resize +}; + static void __init legacy_pty_init(void) { + struct tty_driver *pty_driver, *pty_slave_driver; + if (legacy_count <= 0) return; @@ -383,7 +388,7 @@ static void __init legacy_pty_init(void) pty_driver->init_termios.c_ospeed = 38400; pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; pty_driver->other = pty_slave_driver; - tty_set_operations(pty_driver, &pty_ops); + tty_set_operations(pty_driver, &master_pty_ops_bsd); pty_slave_driver->owner = THIS_MODULE; pty_slave_driver->driver_name = "pty_slave"; @@ -399,7 +404,7 @@ static void __init legacy_pty_init(void) pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; pty_slave_driver->other = pty_driver; - tty_set_operations(pty_slave_driver, &pty_ops); + tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd); if (tty_register_driver(pty_driver)) panic("Couldn't register pty driver"); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 5942a9d674c..452370af95d 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -220,8 +220,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info, char *name, return 1; } - if ((long)info < (long)(&cy_port[0]) - || (long)(&cy_port[NR_PORTS]) < (long)info) { + if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) { printk("Warning: cyclades_port out of range for (%s) in %s\n", name, routine); return 1; @@ -520,15 +519,13 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) panic("TxInt on debug port!!!"); } #endif - - info = &cy_port[channel]; - /* validate the port number (as configured and open) */ if ((channel < 0) || (NR_PORTS <= channel)) { base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); base_addr[CyTEOIR] = CyNOTRANS; return IRQ_HANDLED; } + info = &cy_port[channel]; info->last_active = jiffies; if (info->tty == 0) { base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 29c651ab0d7..6b36ee56e6f 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -981,8 +981,10 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, goto eperm; if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg, - sizeof(struct vt_setactivate))) - return -EFAULT; + sizeof(struct vt_setactivate))) { + ret = -EFAULT; + goto out; + } if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES) ret = -ENXIO; else { diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index f40ab699860..4846d50199f 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -559,7 +559,7 @@ static int hwicap_release(struct inode *inode, struct file *file) return status; } -static struct file_operations hwicap_fops = { +static const struct file_operations hwicap_fops = { .owner = THIS_MODULE, .write = hwicap_write, .read = hwicap_read, diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index bb11a429394..662ed923d9e 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1487,7 +1487,7 @@ static int gpiolib_open(struct inode *inode, struct file *file) return single_open(file, gpiolib_show, NULL); } -static struct file_operations gpiolib_operations = { +static const struct file_operations gpiolib_operations = { .open = gpiolib_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index ba728ad77f2..8e7b0ebece0 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -482,6 +482,7 @@ void drm_connector_cleanup(struct drm_connector *connector) list_for_each_entry_safe(mode, t, &connector->user_modes, head) drm_mode_remove(connector, mode); + kfree(connector->fb_helper_private); mutex_lock(&dev->mode_config.mutex); drm_mode_object_put(dev, &connector->base); list_del(&connector->head); diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index fe8697447f3..1fe4e1d344f 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -32,6 +32,7 @@ #include "drmP.h" #include "drm_crtc.h" #include "drm_crtc_helper.h" +#include "drm_fb_helper.h" static void drm_mode_validate_flag(struct drm_connector *connector, int flags) @@ -90,7 +91,15 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, list_for_each_entry_safe(mode, t, &connector->modes, head) mode->status = MODE_UNVERIFIED; - connector->status = connector->funcs->detect(connector); + if (connector->force) { + if (connector->force == DRM_FORCE_ON) + connector->status = connector_status_connected; + else + connector->status = connector_status_disconnected; + if (connector->funcs->force) + connector->funcs->force(connector); + } else + connector->status = connector->funcs->detect(connector); if (connector->status == connector_status_disconnected) { DRM_DEBUG_KMS("%s is disconnected\n", @@ -267,6 +276,65 @@ static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *con return NULL; } +static bool drm_has_cmdline_mode(struct drm_connector *connector) +{ + struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private; + struct drm_fb_helper_cmdline_mode *cmdline_mode; + + if (!fb_help_conn) + return false; + + cmdline_mode = &fb_help_conn->cmdline_mode; + return cmdline_mode->specified; +} + +static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height) +{ + struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private; + struct drm_fb_helper_cmdline_mode *cmdline_mode; + struct drm_display_mode *mode = NULL; + + if (!fb_help_conn) + return mode; + + cmdline_mode = &fb_help_conn->cmdline_mode; + if (cmdline_mode->specified == false) + return mode; + + /* attempt to find a matching mode in the list of modes + * we have gotten so far, if not add a CVT mode that conforms + */ + if (cmdline_mode->rb || cmdline_mode->margins) + goto create_mode; + + list_for_each_entry(mode, &connector->modes, head) { + /* check width/height */ + if (mode->hdisplay != cmdline_mode->xres || + mode->vdisplay != cmdline_mode->yres) + continue; + + if (cmdline_mode->refresh_specified) { + if (mode->vrefresh != cmdline_mode->refresh) + continue; + } + + if (cmdline_mode->interlace) { + if (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) + continue; + } + return mode; + } + +create_mode: + mode = drm_cvt_mode(connector->dev, cmdline_mode->xres, + cmdline_mode->yres, + cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60, + cmdline_mode->rb, cmdline_mode->interlace, + cmdline_mode->margins); + list_add(&mode->head, &connector->modes); + return mode; +} + static bool drm_connector_enabled(struct drm_connector *connector, bool strict) { bool enable; @@ -317,10 +385,16 @@ static bool drm_target_preferred(struct drm_device *dev, continue; } - DRM_DEBUG_KMS("looking for preferred mode on connector %d\n", - connector->base.id); + DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n", + connector->base.id); - modes[i] = drm_has_preferred_mode(connector, width, height); + /* got for command line mode first */ + modes[i] = drm_pick_cmdline_mode(connector, width, height); + if (!modes[i]) { + DRM_DEBUG_KMS("looking for preferred mode on connector %d\n", + connector->base.id); + modes[i] = drm_has_preferred_mode(connector, width, height); + } /* No preferred modes, pick one off the list */ if (!modes[i] && !list_empty(&connector->modes)) { list_for_each_entry(modes[i], &connector->modes, head) @@ -369,6 +443,8 @@ static int drm_pick_crtcs(struct drm_device *dev, my_score = 1; if (connector->status == connector_status_connected) my_score++; + if (drm_has_cmdline_mode(connector)) + my_score++; if (drm_has_preferred_mode(connector, width, height)) my_score++; @@ -943,6 +1019,8 @@ bool drm_helper_initial_config(struct drm_device *dev) { int count = 0; + drm_fb_helper_parse_command_line(dev); + count = drm_helper_probe_connector_modes(dev, dev->mode_config.max_width, dev->mode_config.max_height); @@ -950,7 +1028,7 @@ bool drm_helper_initial_config(struct drm_device *dev) /* * we shouldn't end up with no modes here. */ - WARN(!count, "Connected connector with 0 modes\n"); + WARN(!count, "No connectors reported connected with modes\n"); drm_setup_crtcs(dev); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 90d76bacff1..3c0d2b3aed7 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -109,7 +109,9 @@ static struct edid_quirk { /* Valid EDID header has these bytes */ -static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 }; +static const u8 edid_header[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 +}; /** * edid_is_valid - sanity check EDID data @@ -500,6 +502,19 @@ static struct drm_display_mode *drm_find_dmt(struct drm_device *dev, } return mode; } + +/* + * 0 is reserved. The spec says 0x01 fill for unused timings. Some old + * monitors fill with ascii space (0x20) instead. + */ +static int +bad_std_timing(u8 a, u8 b) +{ + return (a == 0x00 && b == 0x00) || + (a == 0x01 && b == 0x01) || + (a == 0x20 && b == 0x20); +} + /** * drm_mode_std - convert standard mode info (width, height, refresh) into mode * @t: standard timing params @@ -513,6 +528,7 @@ static struct drm_display_mode *drm_find_dmt(struct drm_device *dev, */ struct drm_display_mode *drm_mode_std(struct drm_device *dev, struct std_timing *t, + int revision, int timing_level) { struct drm_display_mode *mode; @@ -523,14 +539,20 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev, unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK) >> EDID_TIMING_VFREQ_SHIFT; + if (bad_std_timing(t->hsize, t->vfreq_aspect)) + return NULL; + /* According to the EDID spec, the hdisplay = hsize * 8 + 248 */ hsize = t->hsize * 8 + 248; /* vrefresh_rate = vfreq + 60 */ vrefresh_rate = vfreq + 60; /* the vdisplay is calculated based on the aspect ratio */ - if (aspect_ratio == 0) - vsize = (hsize * 10) / 16; - else if (aspect_ratio == 1) + if (aspect_ratio == 0) { + if (revision < 3) + vsize = hsize; + else + vsize = (hsize * 10) / 16; + } else if (aspect_ratio == 1) vsize = (hsize * 3) / 4; else if (aspect_ratio == 2) vsize = (hsize * 4) / 5; @@ -538,7 +560,8 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev, vsize = (hsize * 9) / 16; /* HDTV hack */ if (hsize == 1360 && vsize == 765 && vrefresh_rate == 60) { - mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); + mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0, + false); mode->hdisplay = 1366; mode->vsync_start = mode->vsync_start - 1; mode->vsync_end = mode->vsync_end - 1; @@ -557,7 +580,8 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev, mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); break; case LEVEL_CVT: - mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); + mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0, + false); break; } return mode; @@ -779,7 +803,7 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid continue; newmode = drm_mode_std(dev, &edid->standard_timings[i], - timing_level); + edid->revision, timing_level); if (newmode) { drm_mode_probed_add(connector, newmode); modes++; @@ -829,13 +853,13 @@ static int add_detailed_info(struct drm_connector *connector, case EDID_DETAIL_MONITOR_CPDATA: break; case EDID_DETAIL_STD_MODES: - /* Five modes per detailed section */ - for (j = 0; j < 5; i++) { + for (j = 0; j < 6; i++) { struct std_timing *std; struct drm_display_mode *newmode; std = &data->data.timings[j]; newmode = drm_mode_std(dev, std, + edid->revision, timing_level); if (newmode) { drm_mode_probed_add(connector, newmode); @@ -964,7 +988,9 @@ static int add_detailed_info_eedid(struct drm_connector *connector, struct drm_display_mode *newmode; std = &data->data.timings[j]; - newmode = drm_mode_std(dev, std, timing_level); + newmode = drm_mode_std(dev, std, + edid->revision, + timing_level); if (newmode) { drm_mode_probed_add(connector, newmode); modes++; diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 2c467131488..819ddcbfcce 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -40,6 +40,199 @@ MODULE_LICENSE("GPL and additional rights"); static LIST_HEAD(kernel_fb_helper_list); +int drm_fb_helper_add_connector(struct drm_connector *connector) +{ + connector->fb_helper_private = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL); + if (!connector->fb_helper_private) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_fb_helper_add_connector); + +static int my_atoi(const char *name) +{ + int val = 0; + + for (;; name++) { + switch (*name) { + case '0' ... '9': + val = 10*val+(*name-'0'); + break; + default: + return val; + } + } +} + +/** + * drm_fb_helper_connector_parse_command_line - parse command line for connector + * @connector - connector to parse line for + * @mode_option - per connector mode option + * + * This parses the connector specific then generic command lines for + * modes and options to configure the connector. + * + * This uses the same parameters as the fb modedb.c, except for extra + * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd] + * + * enable/enable Digital/disable bit at the end + */ +static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *connector, + const char *mode_option) +{ + const char *name; + unsigned int namelen; + int res_specified = 0, bpp_specified = 0, refresh_specified = 0; + unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0; + int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0; + int i; + enum drm_connector_force force = DRM_FORCE_UNSPECIFIED; + struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private; + struct drm_fb_helper_cmdline_mode *cmdline_mode; + + if (!fb_help_conn) + return false; + + cmdline_mode = &fb_help_conn->cmdline_mode; + if (!mode_option) + mode_option = fb_mode_option; + + if (!mode_option) { + cmdline_mode->specified = false; + return false; + } + + name = mode_option; + namelen = strlen(name); + for (i = namelen-1; i >= 0; i--) { + switch (name[i]) { + case '@': + namelen = i; + if (!refresh_specified && !bpp_specified && + !yres_specified) { + refresh = my_atoi(&name[i+1]); + refresh_specified = 1; + if (cvt || rb) + cvt = 0; + } else + goto done; + break; + case '-': + namelen = i; + if (!bpp_specified && !yres_specified) { + bpp = my_atoi(&name[i+1]); + bpp_specified = 1; + if (cvt || rb) + cvt = 0; + } else + goto done; + break; + case 'x': + if (!yres_specified) { + yres = my_atoi(&name[i+1]); + yres_specified = 1; + } else + goto done; + case '0' ... '9': + break; + case 'M': + if (!yres_specified) + cvt = 1; + break; + case 'R': + if (!cvt) + rb = 1; + break; + case 'm': + if (!cvt) + margins = 1; + break; + case 'i': + if (!cvt) + interlace = 1; + break; + case 'e': + force = DRM_FORCE_ON; + break; + case 'D': + if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) || + (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) + force = DRM_FORCE_ON; + else + force = DRM_FORCE_ON_DIGITAL; + break; + case 'd': + force = DRM_FORCE_OFF; + break; + default: + goto done; + } + } + if (i < 0 && yres_specified) { + xres = my_atoi(name); + res_specified = 1; + } +done: + + DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n", + drm_get_connector_name(connector), xres, yres, + (refresh) ? refresh : 60, (rb) ? " reduced blanking" : + "", (margins) ? " with margins" : "", (interlace) ? + " interlaced" : ""); + + if (force) { + const char *s; + switch (force) { + case DRM_FORCE_OFF: s = "OFF"; break; + case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break; + default: + case DRM_FORCE_ON: s = "ON"; break; + } + + DRM_INFO("forcing %s connector %s\n", + drm_get_connector_name(connector), s); + connector->force = force; + } + + if (res_specified) { + cmdline_mode->specified = true; + cmdline_mode->xres = xres; + cmdline_mode->yres = yres; + } + + if (refresh_specified) { + cmdline_mode->refresh_specified = true; + cmdline_mode->refresh = refresh; + } + + if (bpp_specified) { + cmdline_mode->bpp_specified = true; + cmdline_mode->bpp = bpp; + } + cmdline_mode->rb = rb ? true : false; + cmdline_mode->cvt = cvt ? true : false; + cmdline_mode->interlace = interlace ? true : false; + + return true; +} + +int drm_fb_helper_parse_command_line(struct drm_device *dev) +{ + struct drm_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + char *option = NULL; + + /* do something on return - turn off connector maybe */ + if (fb_get_options(drm_get_connector_name(connector), &option)) + continue; + + drm_fb_helper_connector_parse_command_line(connector, option); + } + return 0; +} + bool drm_fb_helper_force_kernel_mode(void) { int i = 0; @@ -87,6 +280,7 @@ void drm_fb_helper_restore(void) } EXPORT_SYMBOL(drm_fb_helper_restore); +#ifdef CONFIG_MAGIC_SYSRQ static void drm_fb_helper_restore_work_fn(struct work_struct *ignored) { drm_fb_helper_restore(); @@ -103,6 +297,7 @@ static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { .help_msg = "force-fb(V)", .action_msg = "Restore framebuffer console", }; +#endif static void drm_fb_helper_on(struct fb_info *info) { @@ -484,6 +679,8 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev, uint32_t fb_height, uint32_t surface_width, uint32_t surface_height, + uint32_t surface_depth, + uint32_t surface_bpp, struct drm_framebuffer **fb_ptr)) { struct drm_crtc *crtc; @@ -497,8 +694,43 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev, struct drm_framebuffer *fb; struct drm_mode_set *modeset = NULL; struct drm_fb_helper *fb_helper; + uint32_t surface_depth = 24, surface_bpp = 32; /* first up get a count of crtcs now in use and new min/maxes width/heights */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private; + + struct drm_fb_helper_cmdline_mode *cmdline_mode; + + if (!fb_help_conn) + continue; + + cmdline_mode = &fb_help_conn->cmdline_mode; + + if (cmdline_mode->bpp_specified) { + switch (cmdline_mode->bpp) { + case 8: + surface_depth = surface_bpp = 8; + break; + case 15: + surface_depth = 15; + surface_bpp = 16; + break; + case 16: + surface_depth = surface_bpp = 16; + break; + case 24: + surface_depth = surface_bpp = 24; + break; + case 32: + surface_depth = 24; + surface_bpp = 32; + break; + } + break; + } + } + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (drm_helper_crtc_in_use(crtc)) { if (crtc->desired_mode) { @@ -527,7 +759,8 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev, /* do we have an fb already? */ if (list_empty(&dev->mode_config.fb_kernel_list)) { ret = (*fb_create)(dev, fb_width, fb_height, surface_width, - surface_height, &fb); + surface_height, surface_depth, surface_bpp, + &fb); if (ret) return -EINVAL; new_fb = 1; diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 49404ce1666..51f677215f1 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -88,7 +88,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); #define HV_FACTOR 1000 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, - bool reduced, bool interlaced) + bool reduced, bool interlaced, bool margins) { /* 1) top/bottom margin size (% of height) - default: 1.8, */ #define CVT_MARGIN_PERCENTAGE 18 @@ -101,7 +101,6 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, /* Pixel Clock step (kHz) */ #define CVT_CLOCK_STEP 250 struct drm_display_mode *drm_mode; - bool margins = false; unsigned int vfieldrate, hperiod; int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync; int interlace; diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 7ba4a232a97..e85d7e9eed7 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -110,6 +110,7 @@ EXPORT_SYMBOL(intelfb_resize); static int intelfb_create(struct drm_device *dev, uint32_t fb_width, uint32_t fb_height, uint32_t surface_width, uint32_t surface_height, + uint32_t surface_depth, uint32_t surface_bpp, struct drm_framebuffer **fb_p) { struct fb_info *info; @@ -125,9 +126,9 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, mode_cmd.width = surface_width; mode_cmd.height = surface_height; - mode_cmd.bpp = 32; + mode_cmd.bpp = surface_bpp; mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64); - mode_cmd.depth = 24; + mode_cmd.depth = surface_depth; size = mode_cmd.pitch * mode_cmd.height; size = ALIGN(size, PAGE_SIZE); diff --git a/drivers/gpu/drm/radeon/.gitignore b/drivers/gpu/drm/radeon/.gitignore new file mode 100644 index 00000000000..403eb3a5891 --- /dev/null +++ b/drivers/gpu/drm/radeon/.gitignore @@ -0,0 +1,3 @@ +mkregtable +*_reg_safe.h + diff --git a/drivers/gpu/drm/radeon/avivod.h b/drivers/gpu/drm/radeon/avivod.h index e2b92c445ba..d4e6e6e4a93 100644 --- a/drivers/gpu/drm/radeon/avivod.h +++ b/drivers/gpu/drm/radeon/avivod.h @@ -57,13 +57,4 @@ #define VGA_RENDER_CONTROL 0x0300 #define VGA_VSTATUS_CNTL_MASK 0x00030000 -/* AVIVO disable VGA rendering */ -static inline void radeon_avivo_vga_render_disable(struct radeon_device *rdev) -{ - u32 vga_render; - vga_render = RREG32(VGA_RENDER_CONTROL); - vga_render &= ~VGA_VSTATUS_CNTL_MASK; - WREG32(VGA_RENDER_CONTROL, vga_render); -} - #endif diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index be51c5f7d0f..e6cce24de80 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -863,13 +863,11 @@ int r100_cs_parse_packet0(struct radeon_cs_parser *p, void r100_cs_dump_packet(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt) { - struct radeon_cs_chunk *ib_chunk; volatile uint32_t *ib; unsigned i; unsigned idx; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; idx = pkt->idx; for (i = 0; i <= (pkt->count + 1); i++, idx++) { DRM_INFO("ib[%d]=0x%08X\n", idx, ib[idx]); @@ -896,7 +894,7 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p, idx, ib_chunk->length_dw); return -EINVAL; } - header = ib_chunk->kdata[idx]; + header = radeon_get_ib_value(p, idx); pkt->idx = idx; pkt->type = CP_PACKET_GET_TYPE(header); pkt->count = CP_PACKET_GET_COUNT(header); @@ -939,7 +937,6 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p, */ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p) { - struct radeon_cs_chunk *ib_chunk; struct drm_mode_object *obj; struct drm_crtc *crtc; struct radeon_crtc *radeon_crtc; @@ -947,8 +944,9 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p) int crtc_id; int r; uint32_t header, h_idx, reg; + volatile uint32_t *ib; - ib_chunk = &p->chunks[p->chunk_ib_idx]; + ib = p->ib->ptr; /* parse the wait until */ r = r100_cs_packet_parse(p, &waitreloc, p->idx); @@ -963,24 +961,24 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p) return r; } - if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) { + if (radeon_get_ib_value(p, waitreloc.idx + 1) != RADEON_WAIT_CRTC_VLINE) { DRM_ERROR("vline wait had illegal wait until\n"); r = -EINVAL; return r; } /* jump over the NOP */ - r = r100_cs_packet_parse(p, &p3reloc, p->idx); + r = r100_cs_packet_parse(p, &p3reloc, p->idx + waitreloc.count + 2); if (r) return r; h_idx = p->idx - 2; - p->idx += waitreloc.count; - p->idx += p3reloc.count; + p->idx += waitreloc.count + 2; + p->idx += p3reloc.count + 2; - header = ib_chunk->kdata[h_idx]; - crtc_id = ib_chunk->kdata[h_idx + 5]; - reg = ib_chunk->kdata[h_idx] >> 2; + header = radeon_get_ib_value(p, h_idx); + crtc_id = radeon_get_ib_value(p, h_idx + 5); + reg = header >> 2; mutex_lock(&p->rdev->ddev->mode_config.mutex); obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC); if (!obj) { @@ -994,16 +992,16 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p) if (!crtc->enabled) { /* if the CRTC isn't enabled - we need to nop out the wait until */ - ib_chunk->kdata[h_idx + 2] = PACKET2(0); - ib_chunk->kdata[h_idx + 3] = PACKET2(0); + ib[h_idx + 2] = PACKET2(0); + ib[h_idx + 3] = PACKET2(0); } else if (crtc_id == 1) { switch (reg) { case AVIVO_D1MODE_VLINE_START_END: - header &= R300_CP_PACKET0_REG_MASK; + header &= ~R300_CP_PACKET0_REG_MASK; header |= AVIVO_D2MODE_VLINE_START_END >> 2; break; case RADEON_CRTC_GUI_TRIG_VLINE: - header &= R300_CP_PACKET0_REG_MASK; + header &= ~R300_CP_PACKET0_REG_MASK; header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2; break; default: @@ -1011,8 +1009,8 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p) r = -EINVAL; goto out; } - ib_chunk->kdata[h_idx] = header; - ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1; + ib[h_idx] = header; + ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1; } out: mutex_unlock(&p->rdev->ddev->mode_config.mutex); @@ -1033,7 +1031,6 @@ out: int r100_cs_packet_next_reloc(struct radeon_cs_parser *p, struct radeon_cs_reloc **cs_reloc) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_chunk *relocs_chunk; struct radeon_cs_packet p3reloc; unsigned idx; @@ -1044,7 +1041,6 @@ int r100_cs_packet_next_reloc(struct radeon_cs_parser *p, return -EINVAL; } *cs_reloc = NULL; - ib_chunk = &p->chunks[p->chunk_ib_idx]; relocs_chunk = &p->chunks[p->chunk_relocs_idx]; r = r100_cs_packet_parse(p, &p3reloc, p->idx); if (r) { @@ -1057,7 +1053,7 @@ int r100_cs_packet_next_reloc(struct radeon_cs_parser *p, r100_cs_dump_packet(p, &p3reloc); return -EINVAL; } - idx = ib_chunk->kdata[p3reloc.idx + 1]; + idx = radeon_get_ib_value(p, p3reloc.idx + 1); if (idx >= relocs_chunk->length_dw) { DRM_ERROR("Relocs at %d after relocations chunk end %d !\n", idx, relocs_chunk->length_dw); @@ -1126,7 +1122,6 @@ static int r100_packet0_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx, unsigned reg) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_reloc *reloc; struct r100_cs_track *track; volatile uint32_t *ib; @@ -1134,11 +1129,13 @@ static int r100_packet0_check(struct radeon_cs_parser *p, int r; int i, face; u32 tile_flags = 0; + u32 idx_value; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; track = (struct r100_cs_track *)p->track; + idx_value = radeon_get_ib_value(p, idx); + switch (reg) { case RADEON_CRTC_GUI_TRIG_VLINE: r = r100_cs_packet_parse_vline(p); @@ -1166,8 +1163,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p, return r; } track->zb.robj = reloc->robj; - track->zb.offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->zb.offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case RADEON_RB3D_COLOROFFSET: r = r100_cs_packet_next_reloc(p, &reloc); @@ -1178,8 +1175,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p, return r; } track->cb[0].robj = reloc->robj; - track->cb[0].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->cb[0].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case RADEON_PP_TXOFFSET_0: case RADEON_PP_TXOFFSET_1: @@ -1192,7 +1189,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[i].robj = reloc->robj; break; case RADEON_PP_CUBIC_OFFSET_T0_0: @@ -1208,8 +1205,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - track->textures[0].cube_info[i].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->textures[0].cube_info[i].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[0].cube_info[i].robj = reloc->robj; break; case RADEON_PP_CUBIC_OFFSET_T1_0: @@ -1225,8 +1222,8 @@ static int r100_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - track->textures[1].cube_info[i].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->textures[1].cube_info[i].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[1].cube_info[i].robj = reloc->robj; break; case RADEON_PP_CUBIC_OFFSET_T2_0: @@ -1242,12 +1239,12 @@ static int r100_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - track->textures[2].cube_info[i].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->textures[2].cube_info[i].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[2].cube_info[i].robj = reloc->robj; break; case RADEON_RE_WIDTH_HEIGHT: - track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF); + track->maxy = ((idx_value >> 16) & 0x7FF); break; case RADEON_RB3D_COLORPITCH: r = r100_cs_packet_next_reloc(p, &reloc); @@ -1263,17 +1260,17 @@ static int r100_packet0_check(struct radeon_cs_parser *p, if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) tile_flags |= RADEON_COLOR_MICROTILE_ENABLE; - tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp = idx_value & ~(0x7 << 16); tmp |= tile_flags; ib[idx] = tmp; - track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK; + track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK; break; case RADEON_RB3D_DEPTHPITCH: - track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK; + track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK; break; case RADEON_RB3D_CNTL: - switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) { + switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) { case 7: case 8: case 9: @@ -1291,13 +1288,13 @@ static int r100_packet0_check(struct radeon_cs_parser *p, break; default: DRM_ERROR("Invalid color buffer format (%d) !\n", - ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f)); + ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f)); return -EINVAL; } - track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE); + track->z_enabled = !!(idx_value & RADEON_Z_ENABLE); break; case RADEON_RB3D_ZSTENCILCNTL: - switch (ib_chunk->kdata[idx] & 0xf) { + switch (idx_value & 0xf) { case 0: track->zb.cpp = 2; break; @@ -1321,44 +1318,44 @@ static int r100_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case RADEON_PP_CNTL: { - uint32_t temp = ib_chunk->kdata[idx] >> 4; + uint32_t temp = idx_value >> 4; for (i = 0; i < track->num_texture; i++) track->textures[i].enabled = !!(temp & (1 << i)); } break; case RADEON_SE_VF_CNTL: - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = idx_value; break; case RADEON_SE_VTX_FMT: - track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx]); + track->vtx_size = r100_get_vtx_size(idx_value); break; case RADEON_PP_TEX_SIZE_0: case RADEON_PP_TEX_SIZE_1: case RADEON_PP_TEX_SIZE_2: i = (reg - RADEON_PP_TEX_SIZE_0) / 8; - track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1; - track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1; + track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1; + track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1; break; case RADEON_PP_TEX_PITCH_0: case RADEON_PP_TEX_PITCH_1: case RADEON_PP_TEX_PITCH_2: i = (reg - RADEON_PP_TEX_PITCH_0) / 8; - track->textures[i].pitch = ib_chunk->kdata[idx] + 32; + track->textures[i].pitch = idx_value + 32; break; case RADEON_PP_TXFILTER_0: case RADEON_PP_TXFILTER_1: case RADEON_PP_TXFILTER_2: i = (reg - RADEON_PP_TXFILTER_0) / 24; - track->textures[i].num_levels = ((ib_chunk->kdata[idx] & RADEON_MAX_MIP_LEVEL_MASK) + track->textures[i].num_levels = ((idx_value & RADEON_MAX_MIP_LEVEL_MASK) >> RADEON_MAX_MIP_LEVEL_SHIFT); - tmp = (ib_chunk->kdata[idx] >> 23) & 0x7; + tmp = (idx_value >> 23) & 0x7; if (tmp == 2 || tmp == 6) track->textures[i].roundup_w = false; - tmp = (ib_chunk->kdata[idx] >> 27) & 0x7; + tmp = (idx_value >> 27) & 0x7; if (tmp == 2 || tmp == 6) track->textures[i].roundup_h = false; break; @@ -1366,16 +1363,16 @@ static int r100_packet0_check(struct radeon_cs_parser *p, case RADEON_PP_TXFORMAT_1: case RADEON_PP_TXFORMAT_2: i = (reg - RADEON_PP_TXFORMAT_0) / 24; - if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_NON_POWER2) { + if (idx_value & RADEON_TXFORMAT_NON_POWER2) { track->textures[i].use_pitch = 1; } else { track->textures[i].use_pitch = 0; - track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK); - track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK); + track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK); + track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK); } - if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_CUBIC_MAP_ENABLE) + if (idx_value & RADEON_TXFORMAT_CUBIC_MAP_ENABLE) track->textures[i].tex_coord_type = 2; - switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) { + switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) { case RADEON_TXFORMAT_I8: case RADEON_TXFORMAT_RGB332: case RADEON_TXFORMAT_Y8: @@ -1402,13 +1399,13 @@ static int r100_packet0_check(struct radeon_cs_parser *p, track->textures[i].cpp = 4; break; } - track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf); - track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf); + track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf); + track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf); break; case RADEON_PP_CUBIC_FACES_0: case RADEON_PP_CUBIC_FACES_1: case RADEON_PP_CUBIC_FACES_2: - tmp = ib_chunk->kdata[idx]; + tmp = idx_value; i = (reg - RADEON_PP_CUBIC_FACES_0) / 4; for (face = 0; face < 4; face++) { track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf); @@ -1427,15 +1424,14 @@ int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, struct radeon_object *robj) { - struct radeon_cs_chunk *ib_chunk; unsigned idx; - - ib_chunk = &p->chunks[p->chunk_ib_idx]; + u32 value; idx = pkt->idx + 1; - if ((ib_chunk->kdata[idx+2] + 1) > radeon_object_size(robj)) { + value = radeon_get_ib_value(p, idx + 2); + if ((value + 1) > radeon_object_size(robj)) { DRM_ERROR("[drm] Buffer too small for PACKET3 INDX_BUFFER " "(need %u have %lu) !\n", - ib_chunk->kdata[idx+2] + 1, + value + 1, radeon_object_size(robj)); return -EINVAL; } @@ -1445,59 +1441,20 @@ int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p, static int r100_packet3_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_reloc *reloc; struct r100_cs_track *track; unsigned idx; - unsigned i, c; volatile uint32_t *ib; int r; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; idx = pkt->idx + 1; track = (struct r100_cs_track *)p->track; switch (pkt->opcode) { case PACKET3_3D_LOAD_VBPNTR: - c = ib_chunk->kdata[idx++]; - track->num_arrays = c; - for (i = 0; i < (c - 1); i += 2, idx += 3) { - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for packet3 %d\n", - pkt->opcode); - r100_cs_dump_packet(p, pkt); - return r; - } - ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset); - track->arrays[i + 0].robj = reloc->robj; - track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8; - track->arrays[i + 0].esize &= 0x7F; - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for packet3 %d\n", - pkt->opcode); - r100_cs_dump_packet(p, pkt); - return r; - } - ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset); - track->arrays[i + 1].robj = reloc->robj; - track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24; - track->arrays[i + 1].esize &= 0x7F; - } - if (c & 1) { - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for packet3 %d\n", - pkt->opcode); - r100_cs_dump_packet(p, pkt); - return r; - } - ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset); - track->arrays[i + 0].robj = reloc->robj; - track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8; - track->arrays[i + 0].esize &= 0x7F; - } + r = r100_packet3_load_vbpntr(p, pkt, idx); + if (r) + return r; break; case PACKET3_INDX_BUFFER: r = r100_cs_packet_next_reloc(p, &reloc); @@ -1506,7 +1463,7 @@ static int r100_packet3_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset); + ib[idx+1] = radeon_get_ib_value(p, idx+1) + ((u32)reloc->lobj.gpu_offset); r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj); if (r) { return r; @@ -1520,27 +1477,27 @@ static int r100_packet3_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = radeon_get_ib_value(p, idx) + ((u32)reloc->lobj.gpu_offset); track->num_arrays = 1; - track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx+2]); + track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 2)); track->arrays[0].robj = reloc->robj; track->arrays[0].esize = track->vtx_size; - track->max_indx = ib_chunk->kdata[idx+1]; + track->max_indx = radeon_get_ib_value(p, idx+1); - track->vap_vf_cntl = ib_chunk->kdata[idx+3]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx+3); track->immd_dwords = pkt->count - 1; r = r100_cs_track_check(p->rdev, track); if (r) return r; break; case PACKET3_3D_DRAW_IMMD: - if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) { + if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) { DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n"); return -EINVAL; } - track->vap_vf_cntl = ib_chunk->kdata[idx+1]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); track->immd_dwords = pkt->count - 1; r = r100_cs_track_check(p->rdev, track); if (r) @@ -1548,11 +1505,11 @@ static int r100_packet3_check(struct radeon_cs_parser *p, break; /* triggers drawing using in-packet vertex data */ case PACKET3_3D_DRAW_IMMD_2: - if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) { + if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) { DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n"); return -EINVAL; } - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx); track->immd_dwords = pkt->count; r = r100_cs_track_check(p->rdev, track); if (r) @@ -1560,28 +1517,28 @@ static int r100_packet3_check(struct radeon_cs_parser *p, break; /* triggers drawing using in-packet vertex data */ case PACKET3_3D_DRAW_VBUF_2: - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx); r = r100_cs_track_check(p->rdev, track); if (r) return r; break; /* triggers drawing of vertex buffers setup elsewhere */ case PACKET3_3D_DRAW_INDX_2: - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx); r = r100_cs_track_check(p->rdev, track); if (r) return r; break; /* triggers drawing using indices to vertex buffer */ case PACKET3_3D_DRAW_VBUF: - track->vap_vf_cntl = ib_chunk->kdata[idx + 1]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); r = r100_cs_track_check(p->rdev, track); if (r) return r; break; /* triggers drawing of vertex buffers setup elsewhere */ case PACKET3_3D_DRAW_INDX: - track->vap_vf_cntl = ib_chunk->kdata[idx + 1]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); r = r100_cs_track_check(p->rdev, track); if (r) return r; diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h index 70a82eda394..0daf0d76a89 100644 --- a/drivers/gpu/drm/radeon/r100_track.h +++ b/drivers/gpu/drm/radeon/r100_track.h @@ -84,6 +84,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx, unsigned reg); + + static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx, @@ -93,9 +95,7 @@ static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p, u32 tile_flags = 0; u32 tmp; struct radeon_cs_reloc *reloc; - struct radeon_cs_chunk *ib_chunk; - - ib_chunk = &p->chunks[p->chunk_ib_idx]; + u32 value; r = r100_cs_packet_next_reloc(p, &reloc); if (r) { @@ -104,7 +104,8 @@ static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - tmp = ib_chunk->kdata[idx] & 0x003fffff; + value = radeon_get_ib_value(p, idx); + tmp = value & 0x003fffff; tmp += (((u32)reloc->lobj.gpu_offset) >> 10); if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) @@ -119,6 +120,64 @@ static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p, } tmp |= tile_flags; - p->ib->ptr[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp; + p->ib->ptr[idx] = (value & 0x3fc00000) | tmp; return 0; } + +static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p, + struct radeon_cs_packet *pkt, + int idx) +{ + unsigned c, i; + struct radeon_cs_reloc *reloc; + struct r100_cs_track *track; + int r = 0; + volatile uint32_t *ib; + u32 idx_value; + + ib = p->ib->ptr; + track = (struct r100_cs_track *)p->track; + c = radeon_get_ib_value(p, idx++) & 0x1F; + track->num_arrays = c; + for (i = 0; i < (c - 1); i+=2, idx+=3) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for packet3 %d\n", + pkt->opcode); + r100_cs_dump_packet(p, pkt); + return r; + } + idx_value = radeon_get_ib_value(p, idx); + ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset); + + track->arrays[i + 0].esize = idx_value >> 8; + track->arrays[i + 0].robj = reloc->robj; + track->arrays[i + 0].esize &= 0x7F; + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for packet3 %d\n", + pkt->opcode); + r100_cs_dump_packet(p, pkt); + return r; + } + ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset); + track->arrays[i + 1].robj = reloc->robj; + track->arrays[i + 1].esize = idx_value >> 24; + track->arrays[i + 1].esize &= 0x7F; + } + if (c & 1) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for packet3 %d\n", + pkt->opcode); + r100_cs_dump_packet(p, pkt); + return r; + } + idx_value = radeon_get_ib_value(p, idx); + ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset); + track->arrays[i + 0].robj = reloc->robj; + track->arrays[i + 0].esize = idx_value >> 8; + track->arrays[i + 0].esize &= 0x7F; + } + return r; +} diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c index 568c74bfba3..cf7fea5ff2e 100644 --- a/drivers/gpu/drm/radeon/r200.c +++ b/drivers/gpu/drm/radeon/r200.c @@ -96,7 +96,6 @@ int r200_packet0_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx, unsigned reg) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_reloc *reloc; struct r100_cs_track *track; volatile uint32_t *ib; @@ -105,11 +104,11 @@ int r200_packet0_check(struct radeon_cs_parser *p, int i; int face; u32 tile_flags = 0; + u32 idx_value; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; track = (struct r100_cs_track *)p->track; - + idx_value = radeon_get_ib_value(p, idx); switch (reg) { case RADEON_CRTC_GUI_TRIG_VLINE: r = r100_cs_packet_parse_vline(p); @@ -137,8 +136,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, return r; } track->zb.robj = reloc->robj; - track->zb.offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->zb.offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case RADEON_RB3D_COLOROFFSET: r = r100_cs_packet_next_reloc(p, &reloc); @@ -149,8 +148,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, return r; } track->cb[0].robj = reloc->robj; - track->cb[0].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->cb[0].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case R200_PP_TXOFFSET_0: case R200_PP_TXOFFSET_1: @@ -166,7 +165,7 @@ int r200_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[i].robj = reloc->robj; break; case R200_PP_CUBIC_OFFSET_F1_0: @@ -208,12 +207,12 @@ int r200_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - track->textures[i].cube_info[face - 1].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->textures[i].cube_info[face - 1].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[i].cube_info[face - 1].robj = reloc->robj; break; case RADEON_RE_WIDTH_HEIGHT: - track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF); + track->maxy = ((idx_value >> 16) & 0x7FF); break; case RADEON_RB3D_COLORPITCH: r = r100_cs_packet_next_reloc(p, &reloc); @@ -229,17 +228,17 @@ int r200_packet0_check(struct radeon_cs_parser *p, if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) tile_flags |= RADEON_COLOR_MICROTILE_ENABLE; - tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp = idx_value & ~(0x7 << 16); tmp |= tile_flags; ib[idx] = tmp; - track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK; + track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK; break; case RADEON_RB3D_DEPTHPITCH: - track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK; + track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK; break; case RADEON_RB3D_CNTL: - switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) { + switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) { case 7: case 8: case 9: @@ -257,18 +256,18 @@ int r200_packet0_check(struct radeon_cs_parser *p, break; default: DRM_ERROR("Invalid color buffer format (%d) !\n", - ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f)); + ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f)); return -EINVAL; } - if (ib_chunk->kdata[idx] & RADEON_DEPTHXY_OFFSET_ENABLE) { + if (idx_value & RADEON_DEPTHXY_OFFSET_ENABLE) { DRM_ERROR("No support for depth xy offset in kms\n"); return -EINVAL; } - track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE); + track->z_enabled = !!(idx_value & RADEON_Z_ENABLE); break; case RADEON_RB3D_ZSTENCILCNTL: - switch (ib_chunk->kdata[idx] & 0xf) { + switch (idx_value & 0xf) { case 0: track->zb.cpp = 2; break; @@ -292,27 +291,27 @@ int r200_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case RADEON_PP_CNTL: { - uint32_t temp = ib_chunk->kdata[idx] >> 4; + uint32_t temp = idx_value >> 4; for (i = 0; i < track->num_texture; i++) track->textures[i].enabled = !!(temp & (1 << i)); } break; case RADEON_SE_VF_CNTL: - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = idx_value; break; case 0x210c: /* VAP_VF_MAX_VTX_INDX */ - track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL; + track->max_indx = idx_value & 0x00FFFFFFUL; break; case R200_SE_VTX_FMT_0: - track->vtx_size = r200_get_vtx_size_0(ib_chunk->kdata[idx]); + track->vtx_size = r200_get_vtx_size_0(idx_value); break; case R200_SE_VTX_FMT_1: - track->vtx_size += r200_get_vtx_size_1(ib_chunk->kdata[idx]); + track->vtx_size += r200_get_vtx_size_1(idx_value); break; case R200_PP_TXSIZE_0: case R200_PP_TXSIZE_1: @@ -321,8 +320,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_PP_TXSIZE_4: case R200_PP_TXSIZE_5: i = (reg - R200_PP_TXSIZE_0) / 32; - track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1; - track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1; + track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1; + track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1; break; case R200_PP_TXPITCH_0: case R200_PP_TXPITCH_1: @@ -331,7 +330,7 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_PP_TXPITCH_4: case R200_PP_TXPITCH_5: i = (reg - R200_PP_TXPITCH_0) / 32; - track->textures[i].pitch = ib_chunk->kdata[idx] + 32; + track->textures[i].pitch = idx_value + 32; break; case R200_PP_TXFILTER_0: case R200_PP_TXFILTER_1: @@ -340,12 +339,12 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_PP_TXFILTER_4: case R200_PP_TXFILTER_5: i = (reg - R200_PP_TXFILTER_0) / 32; - track->textures[i].num_levels = ((ib_chunk->kdata[idx] & R200_MAX_MIP_LEVEL_MASK) + track->textures[i].num_levels = ((idx_value & R200_MAX_MIP_LEVEL_MASK) >> R200_MAX_MIP_LEVEL_SHIFT); - tmp = (ib_chunk->kdata[idx] >> 23) & 0x7; + tmp = (idx_value >> 23) & 0x7; if (tmp == 2 || tmp == 6) track->textures[i].roundup_w = false; - tmp = (ib_chunk->kdata[idx] >> 27) & 0x7; + tmp = (idx_value >> 27) & 0x7; if (tmp == 2 || tmp == 6) track->textures[i].roundup_h = false; break; @@ -364,8 +363,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_PP_TXFORMAT_X_4: case R200_PP_TXFORMAT_X_5: i = (reg - R200_PP_TXFORMAT_X_0) / 32; - track->textures[i].txdepth = ib_chunk->kdata[idx] & 0x7; - tmp = (ib_chunk->kdata[idx] >> 16) & 0x3; + track->textures[i].txdepth = idx_value & 0x7; + tmp = (idx_value >> 16) & 0x3; /* 2D, 3D, CUBE */ switch (tmp) { case 0: @@ -389,14 +388,14 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_PP_TXFORMAT_4: case R200_PP_TXFORMAT_5: i = (reg - R200_PP_TXFORMAT_0) / 32; - if (ib_chunk->kdata[idx] & R200_TXFORMAT_NON_POWER2) { + if (idx_value & R200_TXFORMAT_NON_POWER2) { track->textures[i].use_pitch = 1; } else { track->textures[i].use_pitch = 0; - track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK); - track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK); + track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK); + track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK); } - switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) { + switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) { case R200_TXFORMAT_I8: case R200_TXFORMAT_RGB332: case R200_TXFORMAT_Y8: @@ -424,8 +423,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, track->textures[i].cpp = 4; break; } - track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf); - track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf); + track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf); + track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf); break; case R200_PP_CUBIC_FACES_0: case R200_PP_CUBIC_FACES_1: @@ -433,7 +432,7 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_PP_CUBIC_FACES_3: case R200_PP_CUBIC_FACES_4: case R200_PP_CUBIC_FACES_5: - tmp = ib_chunk->kdata[idx]; + tmp = idx_value; i = (reg - R200_PP_CUBIC_FACES_0) / 32; for (face = 0; face < 4; face++) { track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index bb151ecdf8f..1ebea8cc8c9 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -697,17 +697,18 @@ static int r300_packet0_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx, unsigned reg) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_reloc *reloc; struct r100_cs_track *track; volatile uint32_t *ib; uint32_t tmp, tile_flags = 0; unsigned i; int r; + u32 idx_value; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; track = (struct r100_cs_track *)p->track; + idx_value = radeon_get_ib_value(p, idx); + switch(reg) { case AVIVO_D1MODE_VLINE_START_END: case RADEON_CRTC_GUI_TRIG_VLINE: @@ -738,8 +739,8 @@ static int r300_packet0_check(struct radeon_cs_parser *p, return r; } track->cb[i].robj = reloc->robj; - track->cb[i].offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->cb[i].offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case R300_ZB_DEPTHOFFSET: r = r100_cs_packet_next_reloc(p, &reloc); @@ -750,8 +751,8 @@ static int r300_packet0_check(struct radeon_cs_parser *p, return r; } track->zb.robj = reloc->robj; - track->zb.offset = ib_chunk->kdata[idx]; - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + track->zb.offset = idx_value; + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case R300_TX_OFFSET_0: case R300_TX_OFFSET_0+4: @@ -777,32 +778,32 @@ static int r300_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); track->textures[i].robj = reloc->robj; break; /* Tracked registers */ case 0x2084: /* VAP_VF_CNTL */ - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = idx_value; break; case 0x20B4: /* VAP_VTX_SIZE */ - track->vtx_size = ib_chunk->kdata[idx] & 0x7F; + track->vtx_size = idx_value & 0x7F; break; case 0x2134: /* VAP_VF_MAX_VTX_INDX */ - track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL; + track->max_indx = idx_value & 0x00FFFFFFUL; break; case 0x43E4: /* SC_SCISSOR1 */ - track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1; + track->maxy = ((idx_value >> 13) & 0x1FFF) + 1; if (p->rdev->family < CHIP_RV515) { track->maxy -= 1440; } break; case 0x4E00: /* RB3D_CCTL */ - track->num_cb = ((ib_chunk->kdata[idx] >> 5) & 0x3) + 1; + track->num_cb = ((idx_value >> 5) & 0x3) + 1; break; case 0x4E38: case 0x4E3C: @@ -825,13 +826,13 @@ static int r300_packet0_check(struct radeon_cs_parser *p, if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) tile_flags |= R300_COLOR_MICROTILE_ENABLE; - tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp = idx_value & ~(0x7 << 16); tmp |= tile_flags; ib[idx] = tmp; i = (reg - 0x4E38) >> 2; - track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE; - switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) { + track->cb[i].pitch = idx_value & 0x3FFE; + switch (((idx_value >> 21) & 0xF)) { case 9: case 11: case 12: @@ -854,13 +855,13 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; default: DRM_ERROR("Invalid color buffer format (%d) !\n", - ((ib_chunk->kdata[idx] >> 21) & 0xF)); + ((idx_value >> 21) & 0xF)); return -EINVAL; } break; case 0x4F00: /* ZB_CNTL */ - if (ib_chunk->kdata[idx] & 2) { + if (idx_value & 2) { track->z_enabled = true; } else { track->z_enabled = false; @@ -868,7 +869,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; case 0x4F10: /* ZB_FORMAT */ - switch ((ib_chunk->kdata[idx] & 0xF)) { + switch ((idx_value & 0xF)) { case 0: case 1: track->zb.cpp = 2; @@ -878,7 +879,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; default: DRM_ERROR("Invalid z buffer format (%d) !\n", - (ib_chunk->kdata[idx] & 0xF)); + (idx_value & 0xF)); return -EINVAL; } break; @@ -897,17 +898,17 @@ static int r300_packet0_check(struct radeon_cs_parser *p, if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) tile_flags |= R300_DEPTHMICROTILE_TILED;; - tmp = ib_chunk->kdata[idx] & ~(0x7 << 16); + tmp = idx_value & ~(0x7 << 16); tmp |= tile_flags; ib[idx] = tmp; - track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC; + track->zb.pitch = idx_value & 0x3FFC; break; case 0x4104: for (i = 0; i < 16; i++) { bool enabled; - enabled = !!(ib_chunk->kdata[idx] & (1 << i)); + enabled = !!(idx_value & (1 << i)); track->textures[i].enabled = enabled; } break; @@ -929,9 +930,9 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case 0x44FC: /* TX_FORMAT1_[0-15] */ i = (reg - 0x44C0) >> 2; - tmp = (ib_chunk->kdata[idx] >> 25) & 0x3; + tmp = (idx_value >> 25) & 0x3; track->textures[i].tex_coord_type = tmp; - switch ((ib_chunk->kdata[idx] & 0x1F)) { + switch ((idx_value & 0x1F)) { case R300_TX_FORMAT_X8: case R300_TX_FORMAT_Y4X4: case R300_TX_FORMAT_Z3Y3X2: @@ -971,7 +972,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; default: DRM_ERROR("Invalid texture format %u\n", - (ib_chunk->kdata[idx] & 0x1F)); + (idx_value & 0x1F)); return -EINVAL; break; } @@ -994,11 +995,11 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case 0x443C: /* TX_FILTER0_[0-15] */ i = (reg - 0x4400) >> 2; - tmp = ib_chunk->kdata[idx] & 0x7; + tmp = idx_value & 0x7; if (tmp == 2 || tmp == 4 || tmp == 6) { track->textures[i].roundup_w = false; } - tmp = (ib_chunk->kdata[idx] >> 3) & 0x7; + tmp = (idx_value >> 3) & 0x7; if (tmp == 2 || tmp == 4 || tmp == 6) { track->textures[i].roundup_h = false; } @@ -1021,12 +1022,12 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case 0x453C: /* TX_FORMAT2_[0-15] */ i = (reg - 0x4500) >> 2; - tmp = ib_chunk->kdata[idx] & 0x3FFF; + tmp = idx_value & 0x3FFF; track->textures[i].pitch = tmp + 1; if (p->rdev->family >= CHIP_RV515) { - tmp = ((ib_chunk->kdata[idx] >> 15) & 1) << 11; + tmp = ((idx_value >> 15) & 1) << 11; track->textures[i].width_11 = tmp; - tmp = ((ib_chunk->kdata[idx] >> 16) & 1) << 11; + tmp = ((idx_value >> 16) & 1) << 11; track->textures[i].height_11 = tmp; } break; @@ -1048,15 +1049,15 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case 0x44BC: /* TX_FORMAT0_[0-15] */ i = (reg - 0x4480) >> 2; - tmp = ib_chunk->kdata[idx] & 0x7FF; + tmp = idx_value & 0x7FF; track->textures[i].width = tmp + 1; - tmp = (ib_chunk->kdata[idx] >> 11) & 0x7FF; + tmp = (idx_value >> 11) & 0x7FF; track->textures[i].height = tmp + 1; - tmp = (ib_chunk->kdata[idx] >> 26) & 0xF; + tmp = (idx_value >> 26) & 0xF; track->textures[i].num_levels = tmp; - tmp = ib_chunk->kdata[idx] & (1 << 31); + tmp = idx_value & (1 << 31); track->textures[i].use_pitch = !!tmp; - tmp = (ib_chunk->kdata[idx] >> 22) & 0xF; + tmp = (idx_value >> 22) & 0xF; track->textures[i].txdepth = tmp; break; case R300_ZB_ZPASS_ADDR: @@ -1067,7 +1068,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; case 0x4be8: /* valid register only on RV530 */ @@ -1085,60 +1086,20 @@ static int r300_packet0_check(struct radeon_cs_parser *p, static int r300_packet3_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt) { - struct radeon_cs_chunk *ib_chunk; - struct radeon_cs_reloc *reloc; struct r100_cs_track *track; volatile uint32_t *ib; unsigned idx; - unsigned i, c; int r; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; idx = pkt->idx + 1; track = (struct r100_cs_track *)p->track; switch(pkt->opcode) { case PACKET3_3D_LOAD_VBPNTR: - c = ib_chunk->kdata[idx++] & 0x1F; - track->num_arrays = c; - for (i = 0; i < (c - 1); i+=2, idx+=3) { - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for packet3 %d\n", - pkt->opcode); - r100_cs_dump_packet(p, pkt); - return r; - } - ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset); - track->arrays[i + 0].robj = reloc->robj; - track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8; - track->arrays[i + 0].esize &= 0x7F; - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for packet3 %d\n", - pkt->opcode); - r100_cs_dump_packet(p, pkt); - return r; - } - ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset); - track->arrays[i + 1].robj = reloc->robj; - track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24; - track->arrays[i + 1].esize &= 0x7F; - } - if (c & 1) { - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for packet3 %d\n", - pkt->opcode); - r100_cs_dump_packet(p, pkt); - return r; - } - ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset); - track->arrays[i + 0].robj = reloc->robj; - track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8; - track->arrays[i + 0].esize &= 0x7F; - } + r = r100_packet3_load_vbpntr(p, pkt, idx); + if (r) + return r; break; case PACKET3_INDX_BUFFER: r = r100_cs_packet_next_reloc(p, &reloc); @@ -1147,7 +1108,7 @@ static int r300_packet3_check(struct radeon_cs_parser *p, r100_cs_dump_packet(p, pkt); return r; } - ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset); + ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset); r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj); if (r) { return r; @@ -1158,11 +1119,11 @@ static int r300_packet3_check(struct radeon_cs_parser *p, /* Number of dwords is vtx_size * (num_vertices - 1) * PRIM_WALK must be equal to 3 vertex data in embedded * in cmd stream */ - if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) { + if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) { DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n"); return -EINVAL; } - track->vap_vf_cntl = ib_chunk->kdata[idx+1]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); track->immd_dwords = pkt->count - 1; r = r100_cs_track_check(p->rdev, track); if (r) { @@ -1173,11 +1134,11 @@ static int r300_packet3_check(struct radeon_cs_parser *p, /* Number of dwords is vtx_size * (num_vertices - 1) * PRIM_WALK must be equal to 3 vertex data in embedded * in cmd stream */ - if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) { + if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) { DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n"); return -EINVAL; } - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx); track->immd_dwords = pkt->count; r = r100_cs_track_check(p->rdev, track); if (r) { @@ -1185,28 +1146,28 @@ static int r300_packet3_check(struct radeon_cs_parser *p, } break; case PACKET3_3D_DRAW_VBUF: - track->vap_vf_cntl = ib_chunk->kdata[idx + 1]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); r = r100_cs_track_check(p->rdev, track); if (r) { return r; } break; case PACKET3_3D_DRAW_VBUF_2: - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx); r = r100_cs_track_check(p->rdev, track); if (r) { return r; } break; case PACKET3_3D_DRAW_INDX: - track->vap_vf_cntl = ib_chunk->kdata[idx + 1]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); r = r100_cs_track_check(p->rdev, track); if (r) { return r; } break; case PACKET3_3D_DRAW_INDX_2: - track->vap_vf_cntl = ib_chunk->kdata[idx]; + track->vap_vf_cntl = radeon_get_ib_value(p, idx); r = r100_cs_track_check(p->rdev, track); if (r) { return r; diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index e1d5e0331e1..868add6e166 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -445,6 +445,8 @@ #define AVIVO_D1MODE_VBLANK_STATUS 0x6534 # define AVIVO_VBLANK_ACK (1 << 4) #define AVIVO_D1MODE_VLINE_START_END 0x6538 +#define AVIVO_D1MODE_VLINE_STATUS 0x653c +# define AVIVO_D1MODE_VLINE_STAT (1 << 12) #define AVIVO_DxMODE_INT_MASK 0x6540 # define AVIVO_D1MODE_INT_MASK (1 << 0) # define AVIVO_D2MODE_INT_MASK (1 << 8) @@ -502,6 +504,7 @@ #define AVIVO_D2MODE_VBLANK_STATUS 0x6d34 #define AVIVO_D2MODE_VLINE_START_END 0x6d38 +#define AVIVO_D2MODE_VLINE_STATUS 0x6d3c #define AVIVO_D2MODE_VIEWPORT_START 0x6d80 #define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6d88 diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index d4b0b9d2e39..0bf13fccdaf 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -26,108 +26,13 @@ * Jerome Glisse */ #include "drmP.h" -#include "radeon_reg.h" #include "radeon.h" +#include "atom.h" +#include "r520d.h" -/* r520,rv530,rv560,rv570,r580 depends on : */ -void r100_hdp_reset(struct radeon_device *rdev); -void r420_pipes_init(struct radeon_device *rdev); -void rs600_mc_disable_clients(struct radeon_device *rdev); -void rs600_disable_vga(struct radeon_device *rdev); -int rv515_debugfs_pipes_info_init(struct radeon_device *rdev); -int rv515_debugfs_ga_info_init(struct radeon_device *rdev); +/* This files gather functions specifics to: r520,rv530,rv560,rv570,r580 */ -/* This files gather functions specifics to: - * r520,rv530,rv560,rv570,r580 - * - * Some of these functions might be used by newer ASICs. - */ -void r520_gpu_init(struct radeon_device *rdev); -int r520_mc_wait_for_idle(struct radeon_device *rdev); - - -/* - * MC - */ -int r520_mc_init(struct radeon_device *rdev) -{ - uint32_t tmp; - int r; - - if (r100_debugfs_rbbm_init(rdev)) { - DRM_ERROR("Failed to register debugfs file for RBBM !\n"); - } - if (rv515_debugfs_pipes_info_init(rdev)) { - DRM_ERROR("Failed to register debugfs file for pipes !\n"); - } - if (rv515_debugfs_ga_info_init(rdev)) { - DRM_ERROR("Failed to register debugfs file for pipes !\n"); - } - - r520_gpu_init(rdev); - rv370_pcie_gart_disable(rdev); - - /* Setup GPU memory space */ - rdev->mc.vram_location = 0xFFFFFFFFUL; - rdev->mc.gtt_location = 0xFFFFFFFFUL; - if (rdev->flags & RADEON_IS_AGP) { - r = radeon_agp_init(rdev); - if (r) { - printk(KERN_WARNING "[drm] Disabling AGP\n"); - rdev->flags &= ~RADEON_IS_AGP; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; - } else { - rdev->mc.gtt_location = rdev->mc.agp_base; - } - } - r = radeon_mc_setup(rdev); - if (r) { - return r; - } - - /* Program GPU memory space */ - rs600_mc_disable_clients(rdev); - if (r520_mc_wait_for_idle(rdev)) { - printk(KERN_WARNING "Failed to wait MC idle while " - "programming pipes. Bad things might happen.\n"); - } - /* Write VRAM size in case we are limiting it */ - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); - tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; - tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16); - tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16); - WREG32_MC(R520_MC_FB_LOCATION, tmp); - WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16); - WREG32(0x310, rdev->mc.vram_location); - if (rdev->flags & RADEON_IS_AGP) { - tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1; - tmp = REG_SET(R520_MC_AGP_TOP, tmp >> 16); - tmp |= REG_SET(R520_MC_AGP_START, rdev->mc.gtt_location >> 16); - WREG32_MC(R520_MC_AGP_LOCATION, tmp); - WREG32_MC(R520_MC_AGP_BASE, rdev->mc.agp_base); - WREG32_MC(R520_MC_AGP_BASE_2, 0); - } else { - WREG32_MC(R520_MC_AGP_LOCATION, 0x0FFFFFFF); - WREG32_MC(R520_MC_AGP_BASE, 0); - WREG32_MC(R520_MC_AGP_BASE_2, 0); - } - return 0; -} - -void r520_mc_fini(struct radeon_device *rdev) -{ -} - - -/* - * Global GPU functions - */ -void r520_errata(struct radeon_device *rdev) -{ - rdev->pll_errata = 0; -} - -int r520_mc_wait_for_idle(struct radeon_device *rdev) +static int r520_mc_wait_for_idle(struct radeon_device *rdev) { unsigned i; uint32_t tmp; @@ -143,12 +48,12 @@ int r520_mc_wait_for_idle(struct radeon_device *rdev) return -1; } -void r520_gpu_init(struct radeon_device *rdev) +static void r520_gpu_init(struct radeon_device *rdev) { unsigned pipe_select_current, gb_pipe_select, tmp; r100_hdp_reset(rdev); - rs600_disable_vga(rdev); + rv515_vga_render_disable(rdev); /* * DST_PIPE_CONFIG 0x170C * GB_TILE_CONFIG 0x4018 @@ -186,10 +91,6 @@ void r520_gpu_init(struct radeon_device *rdev) } } - -/* - * VRAM info - */ static void r520_vram_get_type(struct radeon_device *rdev) { uint32_t tmp; @@ -233,7 +134,168 @@ void r520_vram_info(struct radeon_device *rdev) rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a); } -void r520_bandwidth_update(struct radeon_device *rdev) +void r520_mc_program(struct radeon_device *rdev) +{ + struct rv515_mc_save save; + + /* Stops all mc clients */ + rv515_mc_stop(rdev, &save); + + /* Wait for mc idle */ + if (r520_mc_wait_for_idle(rdev)) + dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n"); + /* Write VRAM size in case we are limiting it */ + WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size); + /* Program MC, should be a 32bits limited address space */ + WREG32_MC(R_000004_MC_FB_LOCATION, + S_000004_MC_FB_START(rdev->mc.vram_start >> 16) | + S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16)); + WREG32(R_000134_HDP_FB_LOCATION, + S_000134_HDP_FB_START(rdev->mc.vram_start >> 16)); + if (rdev->flags & RADEON_IS_AGP) { + WREG32_MC(R_000005_MC_AGP_LOCATION, + S_000005_MC_AGP_START(rdev->mc.gtt_start >> 16) | + S_000005_MC_AGP_TOP(rdev->mc.gtt_end >> 16)); + WREG32_MC(R_000006_AGP_BASE, lower_32_bits(rdev->mc.agp_base)); + WREG32_MC(R_000007_AGP_BASE_2, + S_000007_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base))); + } else { + WREG32_MC(R_000005_MC_AGP_LOCATION, 0xFFFFFFFF); + WREG32_MC(R_000006_AGP_BASE, 0); + WREG32_MC(R_000007_AGP_BASE_2, 0); + } + + rv515_mc_resume(rdev, &save); +} + +static int r520_startup(struct radeon_device *rdev) +{ + int r; + + r520_mc_program(rdev); + /* Resume clock */ + rv515_clock_startup(rdev); + /* Initialize GPU configuration (# pipes, ...) */ + r520_gpu_init(rdev); + /* Initialize GART (initialize after TTM so we can allocate + * memory through TTM but finalize after TTM) */ + if (rdev->flags & RADEON_IS_PCIE) { + r = rv370_pcie_gart_enable(rdev); + if (r) + return r; + } + /* Enable IRQ */ + rdev->irq.sw_int = true; + r100_irq_set(rdev); + /* 1M ring buffer */ + r = r100_cp_init(rdev, 1024 * 1024); + if (r) { + dev_err(rdev->dev, "failled initializing CP (%d).\n", r); + return r; + } + r = r100_wb_init(rdev); + if (r) + dev_err(rdev->dev, "failled initializing WB (%d).\n", r); + r = r100_ib_init(rdev); + if (r) { + dev_err(rdev->dev, "failled initializing IB (%d).\n", r); + return r; + } + return 0; +} + +int r520_resume(struct radeon_device *rdev) { - rv515_bandwidth_avivo_update(rdev); + /* Make sur GART are not working */ + if (rdev->flags & RADEON_IS_PCIE) + rv370_pcie_gart_disable(rdev); + /* Resume clock before doing reset */ + rv515_clock_startup(rdev); + /* Reset gpu before posting otherwise ATOM will enter infinite loop */ + if (radeon_gpu_reset(rdev)) { + dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", + RREG32(R_000E40_RBBM_STATUS), + RREG32(R_0007C0_CP_STAT)); + } + /* post */ + atom_asic_init(rdev->mode_info.atom_context); + /* Resume clock after posting */ + rv515_clock_startup(rdev); + return r520_startup(rdev); +} + +int r520_init(struct radeon_device *rdev) +{ + int r; + + rdev->new_init_path = true; + /* Initialize scratch registers */ + radeon_scratch_init(rdev); + /* Initialize surface registers */ + radeon_surface_init(rdev); + /* TODO: disable VGA need to use VGA request */ + /* BIOS*/ + if (!radeon_get_bios(rdev)) { + if (ASIC_IS_AVIVO(rdev)) + return -EINVAL; + } + if (rdev->is_atom_bios) { + r = radeon_atombios_init(rdev); + if (r) + return r; + } else { + dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n"); + return -EINVAL; + } + /* Reset gpu before posting otherwise ATOM will enter infinite loop */ + if (radeon_gpu_reset(rdev)) { + dev_warn(rdev->dev, + "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", + RREG32(R_000E40_RBBM_STATUS), + RREG32(R_0007C0_CP_STAT)); + } + /* check if cards are posted or not */ + if (!radeon_card_posted(rdev) && rdev->bios) { + DRM_INFO("GPU not posted. posting now...\n"); + atom_asic_init(rdev->mode_info.atom_context); + } + /* Initialize clocks */ + radeon_get_clock_info(rdev->ddev); + /* Get vram informations */ + r520_vram_info(rdev); + /* Initialize memory controller (also test AGP) */ + r = r420_mc_init(rdev); + if (r) + return r; + rv515_debugfs(rdev); + /* Fence driver */ + r = radeon_fence_driver_init(rdev); + if (r) + return r; + r = radeon_irq_kms_init(rdev); + if (r) + return r; + /* Memory manager */ + r = radeon_object_init(rdev); + if (r) + return r; + r = rv370_pcie_gart_init(rdev); + if (r) + return r; + rv515_set_safe_registers(rdev); + rdev->accel_working = true; + r = r520_startup(rdev); + if (r) { + /* Somethings want wront with the accel init stop accel */ + dev_err(rdev->dev, "Disabling GPU acceleration\n"); + rv515_suspend(rdev); + r100_cp_fini(rdev); + r100_wb_fini(rdev); + r100_ib_fini(rdev); + rv370_pcie_gart_fini(rdev); + radeon_agp_fini(rdev); + radeon_irq_kms_fini(rdev); + rdev->accel_working = false; + } + return 0; } diff --git a/drivers/gpu/drm/radeon/r520d.h b/drivers/gpu/drm/radeon/r520d.h new file mode 100644 index 00000000000..61af61f644b --- /dev/null +++ b/drivers/gpu/drm/radeon/r520d.h @@ -0,0 +1,187 @@ +/* + * Copyright 2008 Advanced Micro Devices, Inc. + * Copyright 2008 Red Hat Inc. + * Copyright 2009 Jerome Glisse. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + * Alex Deucher + * Jerome Glisse + */ +#ifndef __R520D_H__ +#define __R520D_H__ + +/* Registers */ +#define R_0000F8_CONFIG_MEMSIZE 0x0000F8 +#define S_0000F8_CONFIG_MEMSIZE(x) (((x) & 0xFFFFFFFF) << 0) +#define G_0000F8_CONFIG_MEMSIZE(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_0000F8_CONFIG_MEMSIZE 0x00000000 +#define R_000134_HDP_FB_LOCATION 0x000134 +#define S_000134_HDP_FB_START(x) (((x) & 0xFFFF) << 0) +#define G_000134_HDP_FB_START(x) (((x) >> 0) & 0xFFFF) +#define C_000134_HDP_FB_START 0xFFFF0000 +#define R_0007C0_CP_STAT 0x0007C0 +#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0) +#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1) +#define C_0007C0_MRU_BUSY 0xFFFFFFFE +#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1) +#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1) +#define C_0007C0_MWU_BUSY 0xFFFFFFFD +#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2) +#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1) +#define C_0007C0_RSIU_BUSY 0xFFFFFFFB +#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3) +#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1) +#define C_0007C0_RCIU_BUSY 0xFFFFFFF7 +#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9) +#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1) +#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF +#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10) +#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1) +#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF +#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11) +#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1) +#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF +#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12) +#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1) +#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF +#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13) +#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1) +#define C_0007C0_CSI_BUSY 0xFFFFDFFF +#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14) +#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1) +#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF +#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15) +#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1) +#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF +#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28) +#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1) +#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF +#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29) +#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1) +#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF +#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30) +#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1) +#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF +#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31) +#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1) +#define C_0007C0_CP_BUSY 0x7FFFFFFF +#define R_000E40_RBBM_STATUS 0x000E40 +#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0) +#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F) +#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80 +#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8) +#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1) +#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF +#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9) +#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1) +#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF +#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10) +#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1) +#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF +#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11) +#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1) +#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF +#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12) +#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1) +#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF +#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13) +#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1) +#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF +#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14) +#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1) +#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF +#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15) +#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1) +#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF +#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16) +#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1) +#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF +#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17) +#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1) +#define C_000E40_E2_BUSY 0xFFFDFFFF +#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18) +#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1) +#define C_000E40_RB2D_BUSY 0xFFFBFFFF +#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19) +#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1) +#define C_000E40_RB3D_BUSY 0xFFF7FFFF +#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20) +#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1) +#define C_000E40_VAP_BUSY 0xFFEFFFFF +#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21) +#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1) +#define C_000E40_RE_BUSY 0xFFDFFFFF +#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22) +#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1) +#define C_000E40_TAM_BUSY 0xFFBFFFFF +#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23) +#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1) +#define C_000E40_TDM_BUSY 0xFF7FFFFF +#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24) +#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1) +#define C_000E40_PB_BUSY 0xFEFFFFFF +#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25) +#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1) +#define C_000E40_TIM_BUSY 0xFDFFFFFF +#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26) +#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1) +#define C_000E40_GA_BUSY 0xFBFFFFFF +#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27) +#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1) +#define C_000E40_CBA2D_BUSY 0xF7FFFFFF +#define S_000E40_RBBM_HIBUSY(x) (((x) & 0x1) << 28) +#define G_000E40_RBBM_HIBUSY(x) (((x) >> 28) & 0x1) +#define C_000E40_RBBM_HIBUSY 0xEFFFFFFF +#define S_000E40_SKID_CFBUSY(x) (((x) & 0x1) << 29) +#define G_000E40_SKID_CFBUSY(x) (((x) >> 29) & 0x1) +#define C_000E40_SKID_CFBUSY 0xDFFFFFFF +#define S_000E40_VAP_VF_BUSY(x) (((x) & 0x1) << 30) +#define G_000E40_VAP_VF_BUSY(x) (((x) >> 30) & 0x1) +#define C_000E40_VAP_VF_BUSY 0xBFFFFFFF +#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31) +#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1) +#define C_000E40_GUI_ACTIVE 0x7FFFFFFF + + +#define R_000004_MC_FB_LOCATION 0x000004 +#define S_000004_MC_FB_START(x) (((x) & 0xFFFF) << 0) +#define G_000004_MC_FB_START(x) (((x) >> 0) & 0xFFFF) +#define C_000004_MC_FB_START 0xFFFF0000 +#define S_000004_MC_FB_TOP(x) (((x) & 0xFFFF) << 16) +#define G_000004_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF) +#define C_000004_MC_FB_TOP 0x0000FFFF +#define R_000005_MC_AGP_LOCATION 0x000005 +#define S_000005_MC_AGP_START(x) (((x) & 0xFFFF) << 0) +#define G_000005_MC_AGP_START(x) (((x) >> 0) & 0xFFFF) +#define C_000005_MC_AGP_START 0xFFFF0000 +#define S_000005_MC_AGP_TOP(x) (((x) & 0xFFFF) << 16) +#define G_000005_MC_AGP_TOP(x) (((x) >> 16) & 0xFFFF) +#define C_000005_MC_AGP_TOP 0x0000FFFF +#define R_000006_AGP_BASE 0x000006 +#define S_000006_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0) +#define G_000006_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_000006_AGP_BASE_ADDR 0x00000000 +#define R_000007_AGP_BASE_2 0x000007 +#define S_000007_AGP_BASE_ADDR_2(x) (((x) & 0xF) << 0) +#define G_000007_AGP_BASE_ADDR_2(x) (((x) >> 0) & 0xF) +#define C_000007_AGP_BASE_ADDR_2 0xFFFFFFF0 + +#endif diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index eab31c1d6df..2e4e60edbff 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -33,8 +33,8 @@ #include "radeon.h" #include "radeon_mode.h" #include "r600d.h" -#include "avivod.h" #include "atom.h" +#include "avivod.h" #define PFP_UCODE_SIZE 576 #define PM4_UCODE_SIZE 1792 @@ -342,7 +342,7 @@ static void r600_mc_resume(struct radeon_device *rdev) /* we need to own VRAM, so turn off the VGA renderer here * to stop it overwriting our objects */ - radeon_avivo_vga_render_disable(rdev); + rv515_vga_render_disable(rdev); } int r600_mc_init(struct radeon_device *rdev) @@ -380,6 +380,13 @@ int r600_mc_init(struct radeon_device *rdev) /* Setup GPU memory space */ rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE); rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE); + + if (rdev->mc.mc_vram_size > rdev->mc.aper_size) + rdev->mc.mc_vram_size = rdev->mc.aper_size; + + if (rdev->mc.real_vram_size > rdev->mc.aper_size) + rdev->mc.real_vram_size = rdev->mc.aper_size; + if (rdev->flags & RADEON_IS_AGP) { r = radeon_agp_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 33b89cd8743..d28970db6a2 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -28,7 +28,6 @@ #include "drmP.h" #include "radeon.h" #include "r600d.h" -#include "avivod.h" static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p, struct radeon_cs_reloc **cs_reloc); @@ -57,7 +56,7 @@ int r600_cs_packet_parse(struct radeon_cs_parser *p, idx, ib_chunk->length_dw); return -EINVAL; } - header = ib_chunk->kdata[idx]; + header = radeon_get_ib_value(p, idx); pkt->idx = idx; pkt->type = CP_PACKET_GET_TYPE(header); pkt->count = CP_PACKET_GET_COUNT(header); @@ -98,7 +97,6 @@ int r600_cs_packet_parse(struct radeon_cs_parser *p, static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p, struct radeon_cs_reloc **cs_reloc) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_chunk *relocs_chunk; struct radeon_cs_packet p3reloc; unsigned idx; @@ -109,7 +107,6 @@ static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p, return -EINVAL; } *cs_reloc = NULL; - ib_chunk = &p->chunks[p->chunk_ib_idx]; relocs_chunk = &p->chunks[p->chunk_relocs_idx]; r = r600_cs_packet_parse(p, &p3reloc, p->idx); if (r) { @@ -121,7 +118,7 @@ static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p, p3reloc.idx); return -EINVAL; } - idx = ib_chunk->kdata[p3reloc.idx + 1]; + idx = radeon_get_ib_value(p, p3reloc.idx + 1); if (idx >= relocs_chunk->length_dw) { DRM_ERROR("Relocs at %d after relocations chunk end %d !\n", idx, relocs_chunk->length_dw); @@ -146,7 +143,6 @@ static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p, static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, struct radeon_cs_reloc **cs_reloc) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_chunk *relocs_chunk; struct radeon_cs_packet p3reloc; unsigned idx; @@ -157,7 +153,6 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, return -EINVAL; } *cs_reloc = NULL; - ib_chunk = &p->chunks[p->chunk_ib_idx]; relocs_chunk = &p->chunks[p->chunk_relocs_idx]; r = r600_cs_packet_parse(p, &p3reloc, p->idx); if (r) { @@ -169,7 +164,7 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, p3reloc.idx); return -EINVAL; } - idx = ib_chunk->kdata[p3reloc.idx + 1]; + idx = radeon_get_ib_value(p, p3reloc.idx + 1); if (idx >= relocs_chunk->length_dw) { DRM_ERROR("Relocs at %d after relocations chunk end %d !\n", idx, relocs_chunk->length_dw); @@ -181,13 +176,136 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, return 0; } +/** + * r600_cs_packet_next_vline() - parse userspace VLINE packet + * @parser: parser structure holding parsing context. + * + * Userspace sends a special sequence for VLINE waits. + * PACKET0 - VLINE_START_END + value + * PACKET3 - WAIT_REG_MEM poll vline status reg + * RELOC (P3) - crtc_id in reloc. + * + * This function parses this and relocates the VLINE START END + * and WAIT_REG_MEM packets to the correct crtc. + * It also detects a switched off crtc and nulls out the + * wait in that case. + */ +static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p) +{ + struct drm_mode_object *obj; + struct drm_crtc *crtc; + struct radeon_crtc *radeon_crtc; + struct radeon_cs_packet p3reloc, wait_reg_mem; + int crtc_id; + int r; + uint32_t header, h_idx, reg, wait_reg_mem_info; + volatile uint32_t *ib; + + ib = p->ib->ptr; + + /* parse the WAIT_REG_MEM */ + r = r600_cs_packet_parse(p, &wait_reg_mem, p->idx); + if (r) + return r; + + /* check its a WAIT_REG_MEM */ + if (wait_reg_mem.type != PACKET_TYPE3 || + wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) { + DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n"); + r = -EINVAL; + return r; + } + + wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1); + /* bit 4 is reg (0) or mem (1) */ + if (wait_reg_mem_info & 0x10) { + DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n"); + r = -EINVAL; + return r; + } + /* waiting for value to be equal */ + if ((wait_reg_mem_info & 0x7) != 0x3) { + DRM_ERROR("vline WAIT_REG_MEM function not equal\n"); + r = -EINVAL; + return r; + } + if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != AVIVO_D1MODE_VLINE_STATUS) { + DRM_ERROR("vline WAIT_REG_MEM bad reg\n"); + r = -EINVAL; + return r; + } + + if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != AVIVO_D1MODE_VLINE_STAT) { + DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n"); + r = -EINVAL; + return r; + } + + /* jump over the NOP */ + r = r600_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2); + if (r) + return r; + + h_idx = p->idx - 2; + p->idx += wait_reg_mem.count + 2; + p->idx += p3reloc.count + 2; + + header = radeon_get_ib_value(p, h_idx); + crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1); + reg = header >> 2; + mutex_lock(&p->rdev->ddev->mode_config.mutex); + obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC); + if (!obj) { + DRM_ERROR("cannot find crtc %d\n", crtc_id); + r = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + radeon_crtc = to_radeon_crtc(crtc); + crtc_id = radeon_crtc->crtc_id; + + if (!crtc->enabled) { + /* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */ + ib[h_idx + 2] = PACKET2(0); + ib[h_idx + 3] = PACKET2(0); + ib[h_idx + 4] = PACKET2(0); + ib[h_idx + 5] = PACKET2(0); + ib[h_idx + 6] = PACKET2(0); + ib[h_idx + 7] = PACKET2(0); + ib[h_idx + 8] = PACKET2(0); + } else if (crtc_id == 1) { + switch (reg) { + case AVIVO_D1MODE_VLINE_START_END: + header &= ~R600_CP_PACKET0_REG_MASK; + header |= AVIVO_D2MODE_VLINE_START_END >> 2; + break; + default: + DRM_ERROR("unknown crtc reloc\n"); + r = -EINVAL; + goto out; + } + ib[h_idx] = header; + ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2; + } +out: + mutex_unlock(&p->rdev->ddev->mode_config.mutex); + return r; +} + static int r600_packet0_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, unsigned idx, unsigned reg) { + int r; + switch (reg) { case AVIVO_D1MODE_VLINE_START_END: - case AVIVO_D2MODE_VLINE_START_END: + r = r600_cs_packet_parse_vline(p); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + return r; + } break; default: printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n", @@ -218,17 +336,18 @@ static int r600_cs_parse_packet0(struct radeon_cs_parser *p, static int r600_packet3_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt) { - struct radeon_cs_chunk *ib_chunk; struct radeon_cs_reloc *reloc; volatile u32 *ib; unsigned idx; unsigned i; unsigned start_reg, end_reg, reg; int r; + u32 idx_value; ib = p->ib->ptr; - ib_chunk = &p->chunks[p->chunk_ib_idx]; idx = pkt->idx + 1; + idx_value = radeon_get_ib_value(p, idx); + switch (pkt->opcode) { case PACKET3_START_3D_CMDBUF: if (p->family >= CHIP_RV770 || pkt->count) { @@ -259,8 +378,8 @@ static int r600_packet3_check(struct radeon_cs_parser *p, DRM_ERROR("bad DRAW_INDEX\n"); return -EINVAL; } - ib[idx+0] += (u32)(reloc->lobj.gpu_offset & 0xffffffff); - ib[idx+1] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff; + ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff); + ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff; break; case PACKET3_DRAW_INDEX_AUTO: if (pkt->count != 1) { @@ -281,14 +400,14 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } /* bit 4 is reg (0) or mem (1) */ - if (ib_chunk->kdata[idx+0] & 0x10) { + if (idx_value & 0x10) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { DRM_ERROR("bad WAIT_REG_MEM\n"); return -EINVAL; } ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff); - ib[idx+2] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff; + ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff; } break; case PACKET3_SURFACE_SYNC: @@ -297,8 +416,8 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } /* 0xffffffff/0x0 is flush all cache flag */ - if (ib_chunk->kdata[idx+1] != 0xffffffff || - ib_chunk->kdata[idx+2] != 0) { + if (radeon_get_ib_value(p, idx + 1) != 0xffffffff || + radeon_get_ib_value(p, idx + 2) != 0) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { DRM_ERROR("bad SURFACE_SYNC\n"); @@ -319,7 +438,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff); - ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff; + ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff; } break; case PACKET3_EVENT_WRITE_EOP: @@ -333,10 +452,10 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff); - ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff; + ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff; break; case PACKET3_SET_CONFIG_REG: - start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONFIG_REG_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_CONFIG_REG_OFFSET) || (start_reg >= PACKET3_SET_CONFIG_REG_END) || @@ -356,7 +475,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, } break; case PACKET3_SET_CONTEXT_REG: - start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONTEXT_REG_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_CONTEXT_REG_OFFSET) || (start_reg >= PACKET3_SET_CONTEXT_REG_END) || @@ -421,7 +540,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, DRM_ERROR("bad SET_RESOURCE\n"); return -EINVAL; } - start_reg = (ib[idx+0] << 2) + PACKET3_SET_RESOURCE_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_RESOURCE_OFFSET) || (start_reg >= PACKET3_SET_RESOURCE_END) || @@ -430,7 +549,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } for (i = 0; i < (pkt->count / 7); i++) { - switch (G__SQ_VTX_CONSTANT_TYPE(ib[idx+(i*7)+6+1])) { + switch (G__SQ_VTX_CONSTANT_TYPE(radeon_get_ib_value(p, idx+(i*7)+6+1))) { case SQ_TEX_VTX_VALID_TEXTURE: /* tex base */ r = r600_cs_packet_next_reloc(p, &reloc); @@ -455,7 +574,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1+(i*7)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff); - ib[idx+1+(i*7)+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff; + ib[idx+1+(i*7)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff; break; case SQ_TEX_VTX_INVALID_TEXTURE: case SQ_TEX_VTX_INVALID_BUFFER: @@ -466,7 +585,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, } break; case PACKET3_SET_ALU_CONST: - start_reg = (ib[idx+0] << 2) + PACKET3_SET_ALU_CONST_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) || (start_reg >= PACKET3_SET_ALU_CONST_END) || @@ -476,7 +595,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, } break; case PACKET3_SET_BOOL_CONST: - start_reg = (ib[idx+0] << 2) + PACKET3_SET_BOOL_CONST_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_BOOL_CONST_OFFSET) || (start_reg >= PACKET3_SET_BOOL_CONST_END) || @@ -486,7 +605,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, } break; case PACKET3_SET_LOOP_CONST: - start_reg = (ib[idx+0] << 2) + PACKET3_SET_LOOP_CONST_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_LOOP_CONST_OFFSET) || (start_reg >= PACKET3_SET_LOOP_CONST_END) || @@ -496,7 +615,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, } break; case PACKET3_SET_CTL_CONST: - start_reg = (ib[idx+0] << 2) + PACKET3_SET_CTL_CONST_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_CTL_CONST_OFFSET) || (start_reg >= PACKET3_SET_CTL_CONST_END) || @@ -510,7 +629,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, DRM_ERROR("bad SET_SAMPLER\n"); return -EINVAL; } - start_reg = (ib[idx+0] << 2) + PACKET3_SET_SAMPLER_OFFSET; + start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_OFFSET; end_reg = 4 * pkt->count + start_reg - 4; if ((start_reg < PACKET3_SET_SAMPLER_OFFSET) || (start_reg >= PACKET3_SET_SAMPLER_END) || @@ -602,6 +721,8 @@ static void r600_cs_parser_fini(struct radeon_cs_parser *parser, int error) kfree(parser->relocs); for (i = 0; i < parser->nchunks; i++) { kfree(parser->chunks[i].kdata); + kfree(parser->chunks[i].kpage[0]); + kfree(parser->chunks[i].kpage[1]); } kfree(parser->chunks); kfree(parser->chunks_array); @@ -639,7 +760,6 @@ int r600_cs_legacy(struct drm_device *dev, void *data, struct drm_file *filp, * uncached). */ ib_chunk = &parser.chunks[parser.chunk_ib_idx]; parser.ib->length_dw = ib_chunk->length_dw; - memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4); *l = parser.ib->length_dw; r = r600_cs_parse(&parser); if (r) { @@ -647,6 +767,12 @@ int r600_cs_legacy(struct drm_device *dev, void *data, struct drm_file *filp, r600_cs_parser_fini(&parser, r); return r; } + r = radeon_cs_finish_pages(&parser); + if (r) { + DRM_ERROR("Invalid command stream !\n"); + r600_cs_parser_fini(&parser, r); + return r; + } r600_cs_parser_fini(&parser, r); return r; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 6311b136259..950b346e343 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -44,6 +44,24 @@ * - TESTING, TESTING, TESTING */ +/* Initialization path: + * We expect that acceleration initialization might fail for various + * reasons even thought we work hard to make it works on most + * configurations. In order to still have a working userspace in such + * situation the init path must succeed up to the memory controller + * initialization point. Failure before this point are considered as + * fatal error. Here is the init callchain : + * radeon_device_init perform common structure, mutex initialization + * asic_init setup the GPU memory layout and perform all + * one time initialization (failure in this + * function are considered fatal) + * asic_startup setup the GPU acceleration, in order to + * follow guideline the first thing this + * function should do is setting the GPU + * memory controller (only MC setup failure + * are considered as fatal) + */ + #include <asm/atomic.h> #include <linux/wait.h> #include <linux/list.h> @@ -342,7 +360,7 @@ struct radeon_ib { unsigned long idx; uint64_t gpu_addr; struct radeon_fence *fence; - volatile uint32_t *ptr; + uint32_t *ptr; uint32_t length_dw; }; @@ -415,7 +433,12 @@ struct radeon_cs_reloc { struct radeon_cs_chunk { uint32_t chunk_id; uint32_t length_dw; + int kpage_idx[2]; + uint32_t *kpage[2]; uint32_t *kdata; + void __user *user_ptr; + int last_copied_page; + int last_page_index; }; struct radeon_cs_parser { @@ -438,8 +461,38 @@ struct radeon_cs_parser { struct radeon_ib *ib; void *track; unsigned family; + int parser_error; }; +extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx); +extern int radeon_cs_finish_pages(struct radeon_cs_parser *p); + + +static inline u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx) +{ + struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx]; + u32 pg_idx, pg_offset; + u32 idx_value = 0; + int new_page; + + pg_idx = (idx * 4) / PAGE_SIZE; + pg_offset = (idx * 4) % PAGE_SIZE; + + if (ibc->kpage_idx[0] == pg_idx) + return ibc->kpage[0][pg_offset/4]; + if (ibc->kpage_idx[1] == pg_idx) + return ibc->kpage[1][pg_offset/4]; + + new_page = radeon_cs_update_pages(p, pg_idx); + if (new_page < 0) { + p->parser_error = new_page; + return 0; + } + + idx_value = ibc->kpage[new_page][pg_offset/4]; + return idx_value; +} + struct radeon_cs_packet { unsigned idx; unsigned type; @@ -943,6 +996,7 @@ extern void radeon_clocks_fini(struct radeon_device *rdev); extern void radeon_scratch_init(struct radeon_device *rdev); extern void radeon_surface_init(struct radeon_device *rdev); extern int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data); +extern void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable); /* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */ struct r100_mc_save { @@ -974,6 +1028,9 @@ extern void r100_vram_init_sizes(struct radeon_device *rdev); extern void r100_wb_disable(struct radeon_device *rdev); extern void r100_wb_fini(struct radeon_device *rdev); extern int r100_wb_init(struct radeon_device *rdev); +extern void r100_hdp_reset(struct radeon_device *rdev); +extern int r100_rb2d_reset(struct radeon_device *rdev); +extern int r100_cp_reset(struct radeon_device *rdev); /* r300,r350,rv350,rv370,rv380 */ extern void r300_set_reg_safe(struct radeon_device *rdev); @@ -985,12 +1042,29 @@ extern int rv370_pcie_gart_enable(struct radeon_device *rdev); extern void rv370_pcie_gart_disable(struct radeon_device *rdev); /* r420,r423,rv410 */ +extern int r420_mc_init(struct radeon_device *rdev); extern u32 r420_mc_rreg(struct radeon_device *rdev, u32 reg); extern void r420_mc_wreg(struct radeon_device *rdev, u32 reg, u32 v); extern int r420_debugfs_pipes_info_init(struct radeon_device *rdev); +extern void r420_pipes_init(struct radeon_device *rdev); /* rv515 */ +struct rv515_mc_save { + u32 d1vga_control; + u32 d2vga_control; + u32 vga_render_control; + u32 vga_hdp_control; + u32 d1crtc_control; + u32 d2crtc_control; +}; extern void rv515_bandwidth_avivo_update(struct radeon_device *rdev); +extern void rv515_vga_render_disable(struct radeon_device *rdev); +extern void rv515_set_safe_registers(struct radeon_device *rdev); +extern void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save); +extern void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save); +extern void rv515_clock_startup(struct radeon_device *rdev); +extern void rv515_debugfs(struct radeon_device *rdev); +extern int rv515_suspend(struct radeon_device *rdev); /* rs690, rs740 */ extern void rs690_line_buffer_adjust(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 8968f78fa1e..c8a4e7b5663 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -420,41 +420,43 @@ static struct radeon_asic rs690_asic = { * rv515 */ int rv515_init(struct radeon_device *rdev); -void rv515_errata(struct radeon_device *rdev); -void rv515_vram_info(struct radeon_device *rdev); +void rv515_fini(struct radeon_device *rdev); int rv515_gpu_reset(struct radeon_device *rdev); -int rv515_mc_init(struct radeon_device *rdev); -void rv515_mc_fini(struct radeon_device *rdev); uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg); void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); void rv515_ring_start(struct radeon_device *rdev); uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg); void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); void rv515_bandwidth_update(struct radeon_device *rdev); +int rv515_resume(struct radeon_device *rdev); +int rv515_suspend(struct radeon_device *rdev); static struct radeon_asic rv515_asic = { .init = &rv515_init, - .errata = &rv515_errata, - .vram_info = &rv515_vram_info, + .fini = &rv515_fini, + .suspend = &rv515_suspend, + .resume = &rv515_resume, + .errata = NULL, + .vram_info = NULL, .vga_set_state = &r100_vga_set_state, .gpu_reset = &rv515_gpu_reset, - .mc_init = &rv515_mc_init, - .mc_fini = &rv515_mc_fini, - .wb_init = &r100_wb_init, - .wb_fini = &r100_wb_fini, + .mc_init = NULL, + .mc_fini = NULL, + .wb_init = NULL, + .wb_fini = NULL, .gart_init = &rv370_pcie_gart_init, .gart_fini = &rv370_pcie_gart_fini, - .gart_enable = &rv370_pcie_gart_enable, - .gart_disable = &rv370_pcie_gart_disable, + .gart_enable = NULL, + .gart_disable = NULL, .gart_tlb_flush = &rv370_pcie_gart_tlb_flush, .gart_set_page = &rv370_pcie_gart_set_page, - .cp_init = &r100_cp_init, - .cp_fini = &r100_cp_fini, - .cp_disable = &r100_cp_disable, + .cp_init = NULL, + .cp_fini = NULL, + .cp_disable = NULL, .cp_commit = &r100_cp_commit, .ring_start = &rv515_ring_start, .ring_test = &r100_ring_test, .ring_ib_execute = &r100_ring_ib_execute, - .ib_test = &r100_ib_test, + .ib_test = NULL, .irq_set = &rs600_irq_set, .irq_process = &rs600_irq_process, .get_vblank_counter = &rs600_get_vblank_counter, @@ -476,35 +478,35 @@ static struct radeon_asic rv515_asic = { /* * r520,rv530,rv560,rv570,r580 */ -void r520_errata(struct radeon_device *rdev); -void r520_vram_info(struct radeon_device *rdev); -int r520_mc_init(struct radeon_device *rdev); -void r520_mc_fini(struct radeon_device *rdev); -void r520_bandwidth_update(struct radeon_device *rdev); +int r520_init(struct radeon_device *rdev); +int r520_resume(struct radeon_device *rdev); static struct radeon_asic r520_asic = { - .init = &rv515_init, - .errata = &r520_errata, - .vram_info = &r520_vram_info, + .init = &r520_init, + .fini = &rv515_fini, + .suspend = &rv515_suspend, + .resume = &r520_resume, + .errata = NULL, + .vram_info = NULL, .vga_set_state = &r100_vga_set_state, .gpu_reset = &rv515_gpu_reset, - .mc_init = &r520_mc_init, - .mc_fini = &r520_mc_fini, - .wb_init = &r100_wb_init, - .wb_fini = &r100_wb_fini, - .gart_init = &rv370_pcie_gart_init, - .gart_fini = &rv370_pcie_gart_fini, - .gart_enable = &rv370_pcie_gart_enable, - .gart_disable = &rv370_pcie_gart_disable, + .mc_init = NULL, + .mc_fini = NULL, + .wb_init = NULL, + .wb_fini = NULL, + .gart_init = NULL, + .gart_fini = NULL, + .gart_enable = NULL, + .gart_disable = NULL, .gart_tlb_flush = &rv370_pcie_gart_tlb_flush, .gart_set_page = &rv370_pcie_gart_set_page, - .cp_init = &r100_cp_init, - .cp_fini = &r100_cp_fini, - .cp_disable = &r100_cp_disable, + .cp_init = NULL, + .cp_fini = NULL, + .cp_disable = NULL, .cp_commit = &r100_cp_commit, .ring_start = &rv515_ring_start, .ring_test = &r100_ring_test, .ring_ib_execute = &r100_ring_ib_execute, - .ib_test = &r100_ib_test, + .ib_test = NULL, .irq_set = &rs600_irq_set, .irq_process = &rs600_irq_process, .get_vblank_counter = &rs600_get_vblank_counter, @@ -519,7 +521,7 @@ static struct radeon_asic r520_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, - .bandwidth_update = &r520_bandwidth_update, + .bandwidth_update = &rv515_bandwidth_update, }; /* @@ -596,7 +598,7 @@ static struct radeon_asic r600_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r600_set_surface_reg, .clear_surface_reg = r600_clear_surface_reg, - .bandwidth_update = &r520_bandwidth_update, + .bandwidth_update = &rv515_bandwidth_update, }; /* @@ -646,7 +648,7 @@ static struct radeon_asic rv770_asic = { .set_clock_gating = &radeon_atom_set_clock_gating, .set_surface_reg = r600_set_surface_reg, .clear_surface_reg = r600_clear_surface_reg, - .bandwidth_update = &r520_bandwidth_update, + .bandwidth_update = &rv515_bandwidth_update, }; #endif diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 74374212830..5b6c08cee40 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -272,12 +272,9 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) (le16_to_cpu(path->usConnObjectId) & OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT; - if ((le16_to_cpu(path->usDeviceTag) == - ATOM_DEVICE_TV1_SUPPORT) - || (le16_to_cpu(path->usDeviceTag) == - ATOM_DEVICE_TV2_SUPPORT) - || (le16_to_cpu(path->usDeviceTag) == - ATOM_DEVICE_CV_SUPPORT)) + /* TODO CV support */ + if (le16_to_cpu(path->usDeviceTag) == + ATOM_DEVICE_CV_SUPPORT) continue; if ((rdev->family == CHIP_RS780) && diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index af1d551f1a8..e376be47a4a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -26,6 +26,7 @@ #include "drmP.h" #include "drm_edid.h" #include "drm_crtc_helper.h" +#include "drm_fb_helper.h" #include "radeon_drm.h" #include "radeon.h" #include "atom.h" @@ -245,7 +246,7 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn if (common_modes[i].w < 320 || common_modes[i].h < 200) continue; - mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false); + mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false, false); drm_mode_probed_add(connector, mode); } } @@ -559,7 +560,7 @@ static int radeon_tv_get_modes(struct drm_connector *connector) radeon_add_common_modes(encoder, connector); else { /* only 800x600 is supported right now on pre-avivo chips */ - tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false); + tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false, false); tv_mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; drm_mode_probed_add(connector, tv_mode); } @@ -743,6 +744,15 @@ struct drm_encoder *radeon_dvi_encoder(struct drm_connector *connector) return NULL; } +static void radeon_dvi_force(struct drm_connector *connector) +{ + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + if (connector->force == DRM_FORCE_ON) + radeon_connector->use_digital = false; + if (connector->force == DRM_FORCE_ON_DIGITAL) + radeon_connector->use_digital = true; +} + struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = { .get_modes = radeon_dvi_get_modes, .mode_valid = radeon_vga_mode_valid, @@ -755,6 +765,7 @@ struct drm_connector_funcs radeon_dvi_connector_funcs = { .fill_modes = drm_helper_probe_single_connector_modes, .set_property = radeon_connector_set_property, .destroy = radeon_connector_destroy, + .force = radeon_dvi_force, }; void @@ -771,6 +782,7 @@ radeon_add_atom_connector(struct drm_device *dev, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *radeon_dig_connector; uint32_t subpixel_order = SubPixelNone; + int ret; /* fixme - tv/cv/din */ if (connector_type == DRM_MODE_CONNECTOR_Unknown) @@ -796,24 +808,30 @@ radeon_add_atom_connector(struct drm_device *dev, switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA"); if (!radeon_connector->ddc_bus) goto failed; } + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); break; case DRM_MODE_CONNECTOR_DVIA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI"); if (!radeon_connector->ddc_bus) goto failed; } + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); @@ -827,7 +845,9 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_dig_connector->igp_lane_info = igp_lane_info; radeon_connector->con_priv = radeon_dig_connector; drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI"); if (!radeon_connector->ddc_bus) @@ -837,6 +857,7 @@ radeon_add_atom_connector(struct drm_device *dev, drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.coherent_mode_property, 1); + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); @@ -850,7 +871,9 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_dig_connector->igp_lane_info = igp_lane_info; radeon_connector->con_priv = radeon_dig_connector; drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI"); if (!radeon_connector->ddc_bus) @@ -869,7 +892,9 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_dig_connector->igp_lane_info = igp_lane_info; radeon_connector->con_priv = radeon_dig_connector; drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP"); if (!radeon_connector->ddc_bus) @@ -882,11 +907,14 @@ radeon_add_atom_connector(struct drm_device *dev, case DRM_MODE_CONNECTOR_9PinDIN: if (radeon_tv == 1) { drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs); + if (ret) + goto failed; + radeon_connector->dac_load_detect = true; + drm_connector_attach_property(&radeon_connector->base, + rdev->mode_info.load_detect_property, + 1); } - drm_connector_attach_property(&radeon_connector->base, - rdev->mode_info.load_detect_property, - 1); break; case DRM_MODE_CONNECTOR_LVDS: radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL); @@ -896,7 +924,9 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_dig_connector->igp_lane_info = igp_lane_info; radeon_connector->con_priv = radeon_dig_connector; drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS"); if (!radeon_connector->ddc_bus) @@ -932,6 +962,7 @@ radeon_add_legacy_connector(struct drm_device *dev, struct drm_connector *connector; struct radeon_connector *radeon_connector; uint32_t subpixel_order = SubPixelNone; + int ret; /* fixme - tv/cv/din */ if (connector_type == DRM_MODE_CONNECTOR_Unknown) @@ -957,24 +988,30 @@ radeon_add_legacy_connector(struct drm_device *dev, switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA"); if (!radeon_connector->ddc_bus) goto failed; } + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); break; case DRM_MODE_CONNECTOR_DVIA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI"); if (!radeon_connector->ddc_bus) goto failed; } + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); @@ -982,11 +1019,14 @@ radeon_add_legacy_connector(struct drm_device *dev, case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_DVID: drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI"); if (!radeon_connector->ddc_bus) goto failed; + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); @@ -998,7 +1038,10 @@ radeon_add_legacy_connector(struct drm_device *dev, case DRM_MODE_CONNECTOR_9PinDIN: if (radeon_tv == 1) { drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs); + if (ret) + goto failed; + radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); @@ -1006,7 +1049,9 @@ radeon_add_legacy_connector(struct drm_device *dev, break; case DRM_MODE_CONNECTOR_LVDS: drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type); - drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs); + ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs); + if (ret) + goto failed; if (i2c_bus->valid) { radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS"); if (!radeon_connector->ddc_bus) diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 12f5990c2d2..5ab2cf96a26 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -142,15 +142,31 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) } p->chunks[i].length_dw = user_chunk.length_dw; - cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data; + p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data; - size = p->chunks[i].length_dw * sizeof(uint32_t); - p->chunks[i].kdata = kmalloc(size, GFP_KERNEL); - if (p->chunks[i].kdata == NULL) { - return -ENOMEM; - } - if (DRM_COPY_FROM_USER(p->chunks[i].kdata, cdata, size)) { - return -EFAULT; + cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data; + if (p->chunks[i].chunk_id != RADEON_CHUNK_ID_IB) { + size = p->chunks[i].length_dw * sizeof(uint32_t); + p->chunks[i].kdata = kmalloc(size, GFP_KERNEL); + if (p->chunks[i].kdata == NULL) { + return -ENOMEM; + } + if (DRM_COPY_FROM_USER(p->chunks[i].kdata, + p->chunks[i].user_ptr, size)) { + return -EFAULT; + } + } else { + p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL); + p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (p->chunks[i].kpage[0] == NULL || p->chunks[i].kpage[1] == NULL) { + kfree(p->chunks[i].kpage[0]); + kfree(p->chunks[i].kpage[1]); + return -ENOMEM; + } + p->chunks[i].kpage_idx[0] = -1; + p->chunks[i].kpage_idx[1] = -1; + p->chunks[i].last_copied_page = -1; + p->chunks[i].last_page_index = ((p->chunks[i].length_dw * 4) - 1) / PAGE_SIZE; } } if (p->chunks[p->chunk_ib_idx].length_dw > (16 * 1024)) { @@ -190,6 +206,8 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) kfree(parser->relocs_ptr); for (i = 0; i < parser->nchunks; i++) { kfree(parser->chunks[i].kdata); + kfree(parser->chunks[i].kpage[0]); + kfree(parser->chunks[i].kpage[1]); } kfree(parser->chunks); kfree(parser->chunks_array); @@ -238,8 +256,14 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) * uncached). */ ib_chunk = &parser.chunks[parser.chunk_ib_idx]; parser.ib->length_dw = ib_chunk->length_dw; - memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4); r = radeon_cs_parse(&parser); + if (r || parser.parser_error) { + DRM_ERROR("Invalid command stream !\n"); + radeon_cs_parser_fini(&parser, r); + mutex_unlock(&rdev->cs_mutex); + return r; + } + r = radeon_cs_finish_pages(&parser); if (r) { DRM_ERROR("Invalid command stream !\n"); radeon_cs_parser_fini(&parser, r); @@ -254,3 +278,64 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) mutex_unlock(&rdev->cs_mutex); return r; } + +int radeon_cs_finish_pages(struct radeon_cs_parser *p) +{ + struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx]; + int i; + int size = PAGE_SIZE; + + for (i = ibc->last_copied_page + 1; i <= ibc->last_page_index; i++) { + if (i == ibc->last_page_index) { + size = (ibc->length_dw * 4) % PAGE_SIZE; + if (size == 0) + size = PAGE_SIZE; + } + + if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)), + ibc->user_ptr + (i * PAGE_SIZE), + size)) + return -EFAULT; + } + return 0; +} + +int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx) +{ + int new_page; + struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx]; + int i; + int size = PAGE_SIZE; + + for (i = ibc->last_copied_page + 1; i < pg_idx; i++) { + if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)), + ibc->user_ptr + (i * PAGE_SIZE), + PAGE_SIZE)) { + p->parser_error = -EFAULT; + return 0; + } + } + + new_page = ibc->kpage_idx[0] < ibc->kpage_idx[1] ? 0 : 1; + + if (pg_idx == ibc->last_page_index) { + size = (ibc->length_dw * 4) % PAGE_SIZE; + if (size == 0) + size = PAGE_SIZE; + } + + if (DRM_COPY_FROM_USER(ibc->kpage[new_page], + ibc->user_ptr + (pg_idx * PAGE_SIZE), + size)) { + p->parser_error = -EFAULT; + return 0; + } + + /* copy to IB here */ + memcpy((void *)(p->ib->ptr+(pg_idx*(PAGE_SIZE/4))), ibc->kpage[new_page], size); + + ibc->last_copied_page = pg_idx; + ibc->kpage_idx[new_page] = pg_idx; + + return new_page; +} diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index daf5db78095..ec835d56d30 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -532,10 +532,13 @@ int radeon_device_init(struct radeon_device *rdev, if (radeon_agpmode == -1) { rdev->flags &= ~RADEON_IS_AGP; - if (rdev->family >= CHIP_RV515 || - rdev->family == CHIP_RV380 || - rdev->family == CHIP_RV410 || - rdev->family == CHIP_R423) { + if (rdev->family >= CHIP_R600) { + DRM_INFO("Forcing AGP to PCIE mode\n"); + rdev->flags |= RADEON_IS_PCIE; + } else if (rdev->family >= CHIP_RV515 || + rdev->family == CHIP_RV380 || + rdev->family == CHIP_RV410 || + rdev->family == CHIP_R423) { DRM_INFO("Forcing AGP to PCIE mode\n"); rdev->flags |= RADEON_IS_PCIE; rdev->asic->gart_init = &rv370_pcie_gart_init; diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 50fce498910..7f50fb864af 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -62,9 +62,6 @@ void radeon_driver_irq_preinstall_kms(struct drm_device *dev); int radeon_driver_irq_postinstall_kms(struct drm_device *dev); void radeon_driver_irq_uninstall_kms(struct drm_device *dev); irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS); -int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master); -void radeon_master_destroy_kms(struct drm_device *dev, - struct drm_master *master); int radeon_dma_ioctl_kms(struct drm_device *dev, void *data, struct drm_file *file_priv); int radeon_gem_object_init(struct drm_gem_object *obj); @@ -260,8 +257,6 @@ static struct drm_driver kms_driver = { .get_vblank_counter = radeon_get_vblank_counter_kms, .enable_vblank = radeon_enable_vblank_kms, .disable_vblank = radeon_disable_vblank_kms, - .master_create = radeon_master_create_kms, - .master_destroy = radeon_master_destroy_kms, #if defined(CONFIG_DEBUG_FS) .debugfs_init = radeon_debugfs_init, .debugfs_cleanup = radeon_debugfs_cleanup, diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 944e4fa78db..1ba704eedef 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -128,6 +128,7 @@ static struct drm_fb_helper_funcs radeon_fb_helper_funcs = { int radeonfb_create(struct drm_device *dev, uint32_t fb_width, uint32_t fb_height, uint32_t surface_width, uint32_t surface_height, + uint32_t surface_depth, uint32_t surface_bpp, struct drm_framebuffer **fb_p) { struct radeon_device *rdev = dev->dev_private; @@ -148,10 +149,10 @@ int radeonfb_create(struct drm_device *dev, mode_cmd.width = surface_width; mode_cmd.height = surface_height; - mode_cmd.bpp = 32; + mode_cmd.bpp = surface_bpp; /* need to align pitch with crtc limits */ mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8); - mode_cmd.depth = 24; + mode_cmd.depth = surface_depth; size = mode_cmd.pitch * mode_cmd.height; aligned_size = ALIGN(size, PAGE_SIZE); @@ -290,13 +291,26 @@ out: return ret; } +static char *mode_option; +int radeon_parse_options(char *options) +{ + char *this_opt; + + if (!options || !*options) + return 0; + + while ((this_opt = strsep(&options, ",")) != NULL) { + if (!*this_opt) + continue; + mode_option = this_opt; + } + return 0; +} + int radeonfb_probe(struct drm_device *dev) { - int ret; - ret = drm_fb_helper_single_fb_probe(dev, &radeonfb_create); - return ret; + return drm_fb_helper_single_fb_probe(dev, &radeonfb_create); } -EXPORT_SYMBOL(radeonfb_probe); int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb) { diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 709bd892b3a..ba128621057 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -201,55 +201,6 @@ void radeon_disable_vblank_kms(struct drm_device *dev, int crtc) /* - * For multiple master (like multiple X). - */ -struct drm_radeon_master_private { - drm_local_map_t *sarea; - drm_radeon_sarea_t *sarea_priv; -}; - -int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master) -{ - struct drm_radeon_master_private *master_priv; - unsigned long sareapage; - int ret; - - master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL); - if (master_priv == NULL) { - return -ENOMEM; - } - /* prebuild the SAREA */ - sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE); - ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, - _DRM_CONTAINS_LOCK, - &master_priv->sarea); - if (ret) { - DRM_ERROR("SAREA setup failed\n"); - return ret; - } - master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea); - master_priv->sarea_priv->pfCurrentPage = 0; - master->driver_priv = master_priv; - return 0; -} - -void radeon_master_destroy_kms(struct drm_device *dev, - struct drm_master *master) -{ - struct drm_radeon_master_private *master_priv = master->driver_priv; - - if (master_priv == NULL) { - return; - } - if (master_priv->sarea) { - drm_rmmap_locked(dev, master_priv->sarea); - } - kfree(master_priv); - master->driver_priv = NULL; -} - - -/* * IOCTL. */ int radeon_dma_ioctl_kms(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index 21da871a793..bfa1ab9c93e 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -3333,6 +3333,7 @@ # define RADEON_CP_PACKET_MAX_DWORDS (1 << 12) # define RADEON_CP_PACKET0_REG_MASK 0x000007ff # define R300_CP_PACKET0_REG_MASK 0x00001fff +# define R600_CP_PACKET0_REG_MASK 0x0000ffff # define RADEON_CP_PACKET1_REG0_MASK 0x000007ff # define RADEON_CP_PACKET1_REG1_MASK 0x003ff800 diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 5b1cf04a011..765bd184b6f 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -689,9 +689,6 @@ struct ttm_backend *radeon_ttm_backend_create(struct radeon_device *rdev) #define RADEON_DEBUGFS_MEM_TYPES 2 -static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES]; -static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32]; - #if defined(CONFIG_DEBUG_FS) static int radeon_mm_dump_table(struct seq_file *m, void *data) { @@ -711,9 +708,11 @@ static int radeon_mm_dump_table(struct seq_file *m, void *data) static int radeon_ttm_debugfs_init(struct radeon_device *rdev) { +#if defined(CONFIG_DEBUG_FS) + static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES]; + static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32]; unsigned i; -#if defined(CONFIG_DEBUG_FS) for (i = 0; i < RADEON_DEBUGFS_MEM_TYPES; i++) { if (i == 0) sprintf(radeon_mem_types_names[i], "radeon_vram_mm"); diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 0e791e26def..4a4fe1cb131 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -28,7 +28,6 @@ #include "drmP.h" #include "radeon_reg.h" #include "radeon.h" -#include "avivod.h" #include "rs600_reg_safe.h" @@ -45,7 +44,6 @@ void r420_pipes_init(struct radeon_device *rdev); */ void rs600_gpu_init(struct radeon_device *rdev); int rs600_mc_wait_for_idle(struct radeon_device *rdev); -void rs600_disable_vga(struct radeon_device *rdev); /* @@ -198,7 +196,7 @@ void rs600_mc_disable_clients(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } - radeon_avivo_vga_render_disable(rdev); + rv515_vga_render_disable(rdev); tmp = RREG32(AVIVO_D1VGA_CONTROL); WREG32(AVIVO_D1VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE); @@ -346,20 +344,6 @@ u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc) /* * Global GPU functions */ -void rs600_disable_vga(struct radeon_device *rdev) -{ - unsigned tmp; - - WREG32(0x330, 0); - WREG32(0x338, 0); - tmp = RREG32(0x300); - tmp &= ~(3 << 16); - WREG32(0x300, tmp); - WREG32(0x308, (1 << 8)); - WREG32(0x310, rdev->mc.vram_location); - WREG32(0x594, 0); -} - int rs600_mc_wait_for_idle(struct radeon_device *rdev) { unsigned i; @@ -385,7 +369,7 @@ void rs600_gpu_init(struct radeon_device *rdev) { /* FIXME: HDP same place on rs600 ? */ r100_hdp_reset(rdev); - rs600_disable_vga(rdev); + rv515_vga_render_disable(rdev); /* FIXME: is this correct ? */ r420_pipes_init(rdev); if (rs600_mc_wait_for_idle(rdev)) { diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 0f585ca8276..7a0098ddf97 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -40,7 +40,6 @@ void rs400_gart_disable(struct radeon_device *rdev); int rs400_gart_enable(struct radeon_device *rdev); void rs400_gart_adjust_size(struct radeon_device *rdev); void rs600_mc_disable_clients(struct radeon_device *rdev); -void rs600_disable_vga(struct radeon_device *rdev); /* This files gather functions specifics to : * rs690,rs740 @@ -125,7 +124,7 @@ void rs690_gpu_init(struct radeon_device *rdev) { /* FIXME: HDP same place on rs690 ? */ r100_hdp_reset(rdev); - rs600_disable_vga(rdev); + rv515_vga_render_disable(rdev); /* FIXME: is this correct ? */ r420_pipes_init(rdev); if (rs690_mc_wait_for_idle(rdev)) { diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index fd799748e7d..e53b5ca7a25 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -29,37 +29,17 @@ #include "drmP.h" #include "rv515d.h" #include "radeon.h" - +#include "atom.h" #include "rv515_reg_safe.h" -/* rv515 depends on : */ -void r100_hdp_reset(struct radeon_device *rdev); -int r100_cp_reset(struct radeon_device *rdev); -int r100_rb2d_reset(struct radeon_device *rdev); -int r100_gui_wait_for_idle(struct radeon_device *rdev); -int r100_cp_init(struct radeon_device *rdev, unsigned ring_size); -void r420_pipes_init(struct radeon_device *rdev); -void rs600_mc_disable_clients(struct radeon_device *rdev); -void rs600_disable_vga(struct radeon_device *rdev); - -/* This files gather functions specifics to: - * rv515 - * - * Some of these functions might be used by newer ASICs. - */ + +/* This files gather functions specifics to: rv515 */ int rv515_debugfs_pipes_info_init(struct radeon_device *rdev); int rv515_debugfs_ga_info_init(struct radeon_device *rdev); void rv515_gpu_init(struct radeon_device *rdev); int rv515_mc_wait_for_idle(struct radeon_device *rdev); - -/* - * MC - */ -int rv515_mc_init(struct radeon_device *rdev) +void rv515_debugfs(struct radeon_device *rdev) { - uint32_t tmp; - int r; - if (r100_debugfs_rbbm_init(rdev)) { DRM_ERROR("Failed to register debugfs file for RBBM !\n"); } @@ -69,67 +49,8 @@ int rv515_mc_init(struct radeon_device *rdev) if (rv515_debugfs_ga_info_init(rdev)) { DRM_ERROR("Failed to register debugfs file for pipes !\n"); } - - rv515_gpu_init(rdev); - rv370_pcie_gart_disable(rdev); - - /* Setup GPU memory space */ - rdev->mc.vram_location = 0xFFFFFFFFUL; - rdev->mc.gtt_location = 0xFFFFFFFFUL; - if (rdev->flags & RADEON_IS_AGP) { - r = radeon_agp_init(rdev); - if (r) { - printk(KERN_WARNING "[drm] Disabling AGP\n"); - rdev->flags &= ~RADEON_IS_AGP; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; - } else { - rdev->mc.gtt_location = rdev->mc.agp_base; - } - } - r = radeon_mc_setup(rdev); - if (r) { - return r; - } - - /* Program GPU memory space */ - rs600_mc_disable_clients(rdev); - if (rv515_mc_wait_for_idle(rdev)) { - printk(KERN_WARNING "Failed to wait MC idle while " - "programming pipes. Bad things might happen.\n"); - } - /* Write VRAM size in case we are limiting it */ - WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size); - tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16); - WREG32(0x134, tmp); - tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; - tmp = REG_SET(MC_FB_TOP, tmp >> 16); - tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16); - WREG32_MC(MC_FB_LOCATION, tmp); - WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16); - WREG32(0x310, rdev->mc.vram_location); - if (rdev->flags & RADEON_IS_AGP) { - tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1; - tmp = REG_SET(MC_AGP_TOP, tmp >> 16); - tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16); - WREG32_MC(MC_AGP_LOCATION, tmp); - WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base); - WREG32_MC(MC_AGP_BASE_2, 0); - } else { - WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF); - WREG32_MC(MC_AGP_BASE, 0); - WREG32_MC(MC_AGP_BASE_2, 0); - } - return 0; -} - -void rv515_mc_fini(struct radeon_device *rdev) -{ } - -/* - * Global GPU functions - */ void rv515_ring_start(struct radeon_device *rdev) { int r; @@ -198,11 +119,6 @@ void rv515_ring_start(struct radeon_device *rdev) radeon_ring_unlock_commit(rdev); } -void rv515_errata(struct radeon_device *rdev) -{ - rdev->pll_errata = 0; -} - int rv515_mc_wait_for_idle(struct radeon_device *rdev) { unsigned i; @@ -219,6 +135,12 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) return -1; } +void rv515_vga_render_disable(struct radeon_device *rdev) +{ + WREG32(R_000300_VGA_RENDER_CONTROL, + RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); +} + void rv515_gpu_init(struct radeon_device *rdev) { unsigned pipe_select_current, gb_pipe_select, tmp; @@ -231,7 +153,7 @@ void rv515_gpu_init(struct radeon_device *rdev) "reseting GPU. Bad things might happen.\n"); } - rs600_disable_vga(rdev); + rv515_vga_render_disable(rdev); r420_pipes_init(rdev); gb_pipe_select = RREG32(0x402C); @@ -335,10 +257,6 @@ int rv515_gpu_reset(struct radeon_device *rdev) return 0; } - -/* - * VRAM info - */ static void rv515_vram_get_type(struct radeon_device *rdev) { uint32_t tmp; @@ -374,10 +292,6 @@ void rv515_vram_info(struct radeon_device *rdev) rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a); } - -/* - * Indirect registers accessor - */ uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg) { uint32_t r; @@ -395,9 +309,6 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) WREG32(MC_IND_INDEX, 0); } -/* - * Debugfs info - */ #if defined(CONFIG_DEBUG_FS) static int rv515_debugfs_pipes_info(struct seq_file *m, void *data) { @@ -459,13 +370,258 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev) #endif } -/* - * Asic initialization - */ -int rv515_init(struct radeon_device *rdev) +void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) +{ + save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL); + save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL); + save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL); + save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL); + save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL); + save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL); + + /* Stop all video */ + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); + WREG32(R_000300_VGA_RENDER_CONTROL, 0); + WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); + WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1); + WREG32(R_006080_D1CRTC_CONTROL, 0); + WREG32(R_006880_D2CRTC_CONTROL, 0); + WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); + WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); +} + +void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) +{ + WREG32(R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start); + WREG32(R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start); + WREG32(R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start); + WREG32(R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start); + WREG32(R_000310_VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start); + /* Unlock host access */ + WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control); + mdelay(1); + /* Restore video state */ + WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); + WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1); + WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control); + WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control); + WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); + WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); + WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); + WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); + WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control); +} + +void rv515_mc_program(struct radeon_device *rdev) +{ + struct rv515_mc_save save; + + /* Stops all mc clients */ + rv515_mc_stop(rdev, &save); + + /* Wait for mc idle */ + if (rv515_mc_wait_for_idle(rdev)) + dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n"); + /* Write VRAM size in case we are limiting it */ + WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size); + /* Program MC, should be a 32bits limited address space */ + WREG32_MC(R_000001_MC_FB_LOCATION, + S_000001_MC_FB_START(rdev->mc.vram_start >> 16) | + S_000001_MC_FB_TOP(rdev->mc.vram_end >> 16)); + WREG32(R_000134_HDP_FB_LOCATION, + S_000134_HDP_FB_START(rdev->mc.vram_start >> 16)); + if (rdev->flags & RADEON_IS_AGP) { + WREG32_MC(R_000002_MC_AGP_LOCATION, + S_000002_MC_AGP_START(rdev->mc.gtt_start >> 16) | + S_000002_MC_AGP_TOP(rdev->mc.gtt_end >> 16)); + WREG32_MC(R_000003_MC_AGP_BASE, lower_32_bits(rdev->mc.agp_base)); + WREG32_MC(R_000004_MC_AGP_BASE_2, + S_000004_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base))); + } else { + WREG32_MC(R_000002_MC_AGP_LOCATION, 0xFFFFFFFF); + WREG32_MC(R_000003_MC_AGP_BASE, 0); + WREG32_MC(R_000004_MC_AGP_BASE_2, 0); + } + + rv515_mc_resume(rdev, &save); +} + +void rv515_clock_startup(struct radeon_device *rdev) +{ + if (radeon_dynclks != -1 && radeon_dynclks) + radeon_atom_set_clock_gating(rdev, 1); + /* We need to force on some of the block */ + WREG32_PLL(R_00000F_CP_DYN_CNTL, + RREG32_PLL(R_00000F_CP_DYN_CNTL) | S_00000F_CP_FORCEON(1)); + WREG32_PLL(R_000011_E2_DYN_CNTL, + RREG32_PLL(R_000011_E2_DYN_CNTL) | S_000011_E2_FORCEON(1)); + WREG32_PLL(R_000013_IDCT_DYN_CNTL, + RREG32_PLL(R_000013_IDCT_DYN_CNTL) | S_000013_IDCT_FORCEON(1)); +} + +static int rv515_startup(struct radeon_device *rdev) +{ + int r; + + rv515_mc_program(rdev); + /* Resume clock */ + rv515_clock_startup(rdev); + /* Initialize GPU configuration (# pipes, ...) */ + rv515_gpu_init(rdev); + /* Initialize GART (initialize after TTM so we can allocate + * memory through TTM but finalize after TTM) */ + if (rdev->flags & RADEON_IS_PCIE) { + r = rv370_pcie_gart_enable(rdev); + if (r) + return r; + } + /* Enable IRQ */ + rdev->irq.sw_int = true; + r100_irq_set(rdev); + /* 1M ring buffer */ + r = r100_cp_init(rdev, 1024 * 1024); + if (r) { + dev_err(rdev->dev, "failled initializing CP (%d).\n", r); + return r; + } + r = r100_wb_init(rdev); + if (r) + dev_err(rdev->dev, "failled initializing WB (%d).\n", r); + r = r100_ib_init(rdev); + if (r) { + dev_err(rdev->dev, "failled initializing IB (%d).\n", r); + return r; + } + return 0; +} + +int rv515_resume(struct radeon_device *rdev) +{ + /* Make sur GART are not working */ + if (rdev->flags & RADEON_IS_PCIE) + rv370_pcie_gart_disable(rdev); + /* Resume clock before doing reset */ + rv515_clock_startup(rdev); + /* Reset gpu before posting otherwise ATOM will enter infinite loop */ + if (radeon_gpu_reset(rdev)) { + dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", + RREG32(R_000E40_RBBM_STATUS), + RREG32(R_0007C0_CP_STAT)); + } + /* post */ + atom_asic_init(rdev->mode_info.atom_context); + /* Resume clock after posting */ + rv515_clock_startup(rdev); + return rv515_startup(rdev); +} + +int rv515_suspend(struct radeon_device *rdev) +{ + r100_cp_disable(rdev); + r100_wb_disable(rdev); + r100_irq_disable(rdev); + if (rdev->flags & RADEON_IS_PCIE) + rv370_pcie_gart_disable(rdev); + return 0; +} + +void rv515_set_safe_registers(struct radeon_device *rdev) { rdev->config.r300.reg_safe_bm = rv515_reg_safe_bm; rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rv515_reg_safe_bm); +} + +void rv515_fini(struct radeon_device *rdev) +{ + rv515_suspend(rdev); + r100_cp_fini(rdev); + r100_wb_fini(rdev); + r100_ib_fini(rdev); + radeon_gem_fini(rdev); + rv370_pcie_gart_fini(rdev); + radeon_agp_fini(rdev); + radeon_irq_kms_fini(rdev); + radeon_fence_driver_fini(rdev); + radeon_object_fini(rdev); + radeon_atombios_fini(rdev); + kfree(rdev->bios); + rdev->bios = NULL; +} + +int rv515_init(struct radeon_device *rdev) +{ + int r; + + rdev->new_init_path = true; + /* Initialize scratch registers */ + radeon_scratch_init(rdev); + /* Initialize surface registers */ + radeon_surface_init(rdev); + /* TODO: disable VGA need to use VGA request */ + /* BIOS*/ + if (!radeon_get_bios(rdev)) { + if (ASIC_IS_AVIVO(rdev)) + return -EINVAL; + } + if (rdev->is_atom_bios) { + r = radeon_atombios_init(rdev); + if (r) + return r; + } else { + dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n"); + return -EINVAL; + } + /* Reset gpu before posting otherwise ATOM will enter infinite loop */ + if (radeon_gpu_reset(rdev)) { + dev_warn(rdev->dev, + "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", + RREG32(R_000E40_RBBM_STATUS), + RREG32(R_0007C0_CP_STAT)); + } + /* check if cards are posted or not */ + if (!radeon_card_posted(rdev) && rdev->bios) { + DRM_INFO("GPU not posted. posting now...\n"); + atom_asic_init(rdev->mode_info.atom_context); + } + /* Initialize clocks */ + radeon_get_clock_info(rdev->ddev); + /* Get vram informations */ + rv515_vram_info(rdev); + /* Initialize memory controller (also test AGP) */ + r = r420_mc_init(rdev); + if (r) + return r; + rv515_debugfs(rdev); + /* Fence driver */ + r = radeon_fence_driver_init(rdev); + if (r) + return r; + r = radeon_irq_kms_init(rdev); + if (r) + return r; + /* Memory manager */ + r = radeon_object_init(rdev); + if (r) + return r; + r = rv370_pcie_gart_init(rdev); + if (r) + return r; + rv515_set_safe_registers(rdev); + rdev->accel_working = true; + r = rv515_startup(rdev); + if (r) { + /* Somethings want wront with the accel init stop accel */ + dev_err(rdev->dev, "Disabling GPU acceleration\n"); + rv515_suspend(rdev); + r100_cp_fini(rdev); + r100_wb_fini(rdev); + r100_ib_fini(rdev); + rv370_pcie_gart_fini(rdev); + radeon_agp_fini(rdev); + radeon_irq_kms_fini(rdev); + rdev->accel_working = false; + } return 0; } diff --git a/drivers/gpu/drm/radeon/rv515d.h b/drivers/gpu/drm/radeon/rv515d.h index a65e17ec1c0..fc216e49384 100644 --- a/drivers/gpu/drm/radeon/rv515d.h +++ b/drivers/gpu/drm/radeon/rv515d.h @@ -216,5 +216,388 @@ #define CP_PACKET0_GET_ONE_REG_WR(h) (((h) >> 15) & 1) #define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF) -#endif +/* Registers */ +#define R_0000F8_CONFIG_MEMSIZE 0x0000F8 +#define S_0000F8_CONFIG_MEMSIZE(x) (((x) & 0xFFFFFFFF) << 0) +#define G_0000F8_CONFIG_MEMSIZE(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_0000F8_CONFIG_MEMSIZE 0x00000000 +#define R_000134_HDP_FB_LOCATION 0x000134 +#define S_000134_HDP_FB_START(x) (((x) & 0xFFFF) << 0) +#define G_000134_HDP_FB_START(x) (((x) >> 0) & 0xFFFF) +#define C_000134_HDP_FB_START 0xFFFF0000 +#define R_000300_VGA_RENDER_CONTROL 0x000300 +#define S_000300_VGA_BLINK_RATE(x) (((x) & 0x1F) << 0) +#define G_000300_VGA_BLINK_RATE(x) (((x) >> 0) & 0x1F) +#define C_000300_VGA_BLINK_RATE 0xFFFFFFE0 +#define S_000300_VGA_BLINK_MODE(x) (((x) & 0x3) << 5) +#define G_000300_VGA_BLINK_MODE(x) (((x) >> 5) & 0x3) +#define C_000300_VGA_BLINK_MODE 0xFFFFFF9F +#define S_000300_VGA_CURSOR_BLINK_INVERT(x) (((x) & 0x1) << 7) +#define G_000300_VGA_CURSOR_BLINK_INVERT(x) (((x) >> 7) & 0x1) +#define C_000300_VGA_CURSOR_BLINK_INVERT 0xFFFFFF7F +#define S_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x) (((x) & 0x1) << 8) +#define G_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x) (((x) >> 8) & 0x1) +#define C_000300_VGA_EXTD_ADDR_COUNT_ENABLE 0xFFFFFEFF +#define S_000300_VGA_VSTATUS_CNTL(x) (((x) & 0x3) << 16) +#define G_000300_VGA_VSTATUS_CNTL(x) (((x) >> 16) & 0x3) +#define C_000300_VGA_VSTATUS_CNTL 0xFFFCFFFF +#define S_000300_VGA_LOCK_8DOT(x) (((x) & 0x1) << 24) +#define G_000300_VGA_LOCK_8DOT(x) (((x) >> 24) & 0x1) +#define C_000300_VGA_LOCK_8DOT 0xFEFFFFFF +#define S_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) & 0x1) << 25) +#define G_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) >> 25) & 0x1) +#define C_000300_VGAREG_LINECMP_COMPATIBILITY_SEL 0xFDFFFFFF +#define R_000310_VGA_MEMORY_BASE_ADDRESS 0x000310 +#define S_000310_VGA_MEMORY_BASE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0) +#define G_000310_VGA_MEMORY_BASE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_000310_VGA_MEMORY_BASE_ADDRESS 0x00000000 +#define R_000328_VGA_HDP_CONTROL 0x000328 +#define S_000328_VGA_MEM_PAGE_SELECT_EN(x) (((x) & 0x1) << 0) +#define G_000328_VGA_MEM_PAGE_SELECT_EN(x) (((x) >> 0) & 0x1) +#define C_000328_VGA_MEM_PAGE_SELECT_EN 0xFFFFFFFE +#define S_000328_VGA_RBBM_LOCK_DISABLE(x) (((x) & 0x1) << 8) +#define G_000328_VGA_RBBM_LOCK_DISABLE(x) (((x) >> 8) & 0x1) +#define C_000328_VGA_RBBM_LOCK_DISABLE 0xFFFFFEFF +#define S_000328_VGA_SOFT_RESET(x) (((x) & 0x1) << 16) +#define G_000328_VGA_SOFT_RESET(x) (((x) >> 16) & 0x1) +#define C_000328_VGA_SOFT_RESET 0xFFFEFFFF +#define S_000328_VGA_TEST_RESET_CONTROL(x) (((x) & 0x1) << 24) +#define G_000328_VGA_TEST_RESET_CONTROL(x) (((x) >> 24) & 0x1) +#define C_000328_VGA_TEST_RESET_CONTROL 0xFEFFFFFF +#define R_000330_D1VGA_CONTROL 0x000330 +#define S_000330_D1VGA_MODE_ENABLE(x) (((x) & 0x1) << 0) +#define G_000330_D1VGA_MODE_ENABLE(x) (((x) >> 0) & 0x1) +#define C_000330_D1VGA_MODE_ENABLE 0xFFFFFFFE +#define S_000330_D1VGA_TIMING_SELECT(x) (((x) & 0x1) << 8) +#define G_000330_D1VGA_TIMING_SELECT(x) (((x) >> 8) & 0x1) +#define C_000330_D1VGA_TIMING_SELECT 0xFFFFFEFF +#define S_000330_D1VGA_SYNC_POLARITY_SELECT(x) (((x) & 0x1) << 9) +#define G_000330_D1VGA_SYNC_POLARITY_SELECT(x) (((x) >> 9) & 0x1) +#define C_000330_D1VGA_SYNC_POLARITY_SELECT 0xFFFFFDFF +#define S_000330_D1VGA_OVERSCAN_TIMING_SELECT(x) (((x) & 0x1) << 10) +#define G_000330_D1VGA_OVERSCAN_TIMING_SELECT(x) (((x) >> 10) & 0x1) +#define C_000330_D1VGA_OVERSCAN_TIMING_SELECT 0xFFFFFBFF +#define S_000330_D1VGA_OVERSCAN_COLOR_EN(x) (((x) & 0x1) << 16) +#define G_000330_D1VGA_OVERSCAN_COLOR_EN(x) (((x) >> 16) & 0x1) +#define C_000330_D1VGA_OVERSCAN_COLOR_EN 0xFFFEFFFF +#define S_000330_D1VGA_ROTATE(x) (((x) & 0x3) << 24) +#define G_000330_D1VGA_ROTATE(x) (((x) >> 24) & 0x3) +#define C_000330_D1VGA_ROTATE 0xFCFFFFFF +#define R_000338_D2VGA_CONTROL 0x000338 +#define S_000338_D2VGA_MODE_ENABLE(x) (((x) & 0x1) << 0) +#define G_000338_D2VGA_MODE_ENABLE(x) (((x) >> 0) & 0x1) +#define C_000338_D2VGA_MODE_ENABLE 0xFFFFFFFE +#define S_000338_D2VGA_TIMING_SELECT(x) (((x) & 0x1) << 8) +#define G_000338_D2VGA_TIMING_SELECT(x) (((x) >> 8) & 0x1) +#define C_000338_D2VGA_TIMING_SELECT 0xFFFFFEFF +#define S_000338_D2VGA_SYNC_POLARITY_SELECT(x) (((x) & 0x1) << 9) +#define G_000338_D2VGA_SYNC_POLARITY_SELECT(x) (((x) >> 9) & 0x1) +#define C_000338_D2VGA_SYNC_POLARITY_SELECT 0xFFFFFDFF +#define S_000338_D2VGA_OVERSCAN_TIMING_SELECT(x) (((x) & 0x1) << 10) +#define G_000338_D2VGA_OVERSCAN_TIMING_SELECT(x) (((x) >> 10) & 0x1) +#define C_000338_D2VGA_OVERSCAN_TIMING_SELECT 0xFFFFFBFF +#define S_000338_D2VGA_OVERSCAN_COLOR_EN(x) (((x) & 0x1) << 16) +#define G_000338_D2VGA_OVERSCAN_COLOR_EN(x) (((x) >> 16) & 0x1) +#define C_000338_D2VGA_OVERSCAN_COLOR_EN 0xFFFEFFFF +#define S_000338_D2VGA_ROTATE(x) (((x) & 0x3) << 24) +#define G_000338_D2VGA_ROTATE(x) (((x) >> 24) & 0x3) +#define C_000338_D2VGA_ROTATE 0xFCFFFFFF +#define R_0007C0_CP_STAT 0x0007C0 +#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0) +#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1) +#define C_0007C0_MRU_BUSY 0xFFFFFFFE +#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1) +#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1) +#define C_0007C0_MWU_BUSY 0xFFFFFFFD +#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2) +#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1) +#define C_0007C0_RSIU_BUSY 0xFFFFFFFB +#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3) +#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1) +#define C_0007C0_RCIU_BUSY 0xFFFFFFF7 +#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9) +#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1) +#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF +#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10) +#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1) +#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF +#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11) +#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1) +#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF +#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12) +#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1) +#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF +#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13) +#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1) +#define C_0007C0_CSI_BUSY 0xFFFFDFFF +#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14) +#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1) +#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF +#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15) +#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1) +#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF +#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28) +#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1) +#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF +#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29) +#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1) +#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF +#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30) +#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1) +#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF +#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31) +#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1) +#define C_0007C0_CP_BUSY 0x7FFFFFFF +#define R_000E40_RBBM_STATUS 0x000E40 +#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0) +#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F) +#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80 +#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8) +#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1) +#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF +#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9) +#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1) +#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF +#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10) +#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1) +#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF +#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11) +#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1) +#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF +#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12) +#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1) +#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF +#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13) +#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1) +#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF +#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14) +#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1) +#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF +#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15) +#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1) +#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF +#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16) +#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1) +#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF +#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17) +#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1) +#define C_000E40_E2_BUSY 0xFFFDFFFF +#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18) +#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1) +#define C_000E40_RB2D_BUSY 0xFFFBFFFF +#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19) +#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1) +#define C_000E40_RB3D_BUSY 0xFFF7FFFF +#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20) +#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1) +#define C_000E40_VAP_BUSY 0xFFEFFFFF +#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21) +#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1) +#define C_000E40_RE_BUSY 0xFFDFFFFF +#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22) +#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1) +#define C_000E40_TAM_BUSY 0xFFBFFFFF +#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23) +#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1) +#define C_000E40_TDM_BUSY 0xFF7FFFFF +#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24) +#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1) +#define C_000E40_PB_BUSY 0xFEFFFFFF +#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25) +#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1) +#define C_000E40_TIM_BUSY 0xFDFFFFFF +#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26) +#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1) +#define C_000E40_GA_BUSY 0xFBFFFFFF +#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27) +#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1) +#define C_000E40_CBA2D_BUSY 0xF7FFFFFF +#define S_000E40_RBBM_HIBUSY(x) (((x) & 0x1) << 28) +#define G_000E40_RBBM_HIBUSY(x) (((x) >> 28) & 0x1) +#define C_000E40_RBBM_HIBUSY 0xEFFFFFFF +#define S_000E40_SKID_CFBUSY(x) (((x) & 0x1) << 29) +#define G_000E40_SKID_CFBUSY(x) (((x) >> 29) & 0x1) +#define C_000E40_SKID_CFBUSY 0xDFFFFFFF +#define S_000E40_VAP_VF_BUSY(x) (((x) & 0x1) << 30) +#define G_000E40_VAP_VF_BUSY(x) (((x) >> 30) & 0x1) +#define C_000E40_VAP_VF_BUSY 0xBFFFFFFF +#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31) +#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1) +#define C_000E40_GUI_ACTIVE 0x7FFFFFFF +#define R_006080_D1CRTC_CONTROL 0x006080 +#define S_006080_D1CRTC_MASTER_EN(x) (((x) & 0x1) << 0) +#define G_006080_D1CRTC_MASTER_EN(x) (((x) >> 0) & 0x1) +#define C_006080_D1CRTC_MASTER_EN 0xFFFFFFFE +#define S_006080_D1CRTC_SYNC_RESET_SEL(x) (((x) & 0x1) << 4) +#define G_006080_D1CRTC_SYNC_RESET_SEL(x) (((x) >> 4) & 0x1) +#define C_006080_D1CRTC_SYNC_RESET_SEL 0xFFFFFFEF +#define S_006080_D1CRTC_DISABLE_POINT_CNTL(x) (((x) & 0x3) << 8) +#define G_006080_D1CRTC_DISABLE_POINT_CNTL(x) (((x) >> 8) & 0x3) +#define C_006080_D1CRTC_DISABLE_POINT_CNTL 0xFFFFFCFF +#define S_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x) (((x) & 0x1) << 16) +#define G_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x) (((x) >> 16) & 0x1) +#define C_006080_D1CRTC_CURRENT_MASTER_EN_STATE 0xFFFEFFFF +#define S_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24) +#define G_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1) +#define C_006080_D1CRTC_DISP_READ_REQUEST_DISABLE 0xFEFFFFFF +#define R_0060E8_D1CRTC_UPDATE_LOCK 0x0060E8 +#define S_0060E8_D1CRTC_UPDATE_LOCK(x) (((x) & 0x1) << 0) +#define G_0060E8_D1CRTC_UPDATE_LOCK(x) (((x) >> 0) & 0x1) +#define C_0060E8_D1CRTC_UPDATE_LOCK 0xFFFFFFFE +#define R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x006110 +#define S_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0) +#define G_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x00000000 +#define R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x006118 +#define S_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0) +#define G_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x00000000 +#define R_006880_D2CRTC_CONTROL 0x006880 +#define S_006880_D2CRTC_MASTER_EN(x) (((x) & 0x1) << 0) +#define G_006880_D2CRTC_MASTER_EN(x) (((x) >> 0) & 0x1) +#define C_006880_D2CRTC_MASTER_EN 0xFFFFFFFE +#define S_006880_D2CRTC_SYNC_RESET_SEL(x) (((x) & 0x1) << 4) +#define G_006880_D2CRTC_SYNC_RESET_SEL(x) (((x) >> 4) & 0x1) +#define C_006880_D2CRTC_SYNC_RESET_SEL 0xFFFFFFEF +#define S_006880_D2CRTC_DISABLE_POINT_CNTL(x) (((x) & 0x3) << 8) +#define G_006880_D2CRTC_DISABLE_POINT_CNTL(x) (((x) >> 8) & 0x3) +#define C_006880_D2CRTC_DISABLE_POINT_CNTL 0xFFFFFCFF +#define S_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x) (((x) & 0x1) << 16) +#define G_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x) (((x) >> 16) & 0x1) +#define C_006880_D2CRTC_CURRENT_MASTER_EN_STATE 0xFFFEFFFF +#define S_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24) +#define G_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1) +#define C_006880_D2CRTC_DISP_READ_REQUEST_DISABLE 0xFEFFFFFF +#define R_0068E8_D2CRTC_UPDATE_LOCK 0x0068E8 +#define S_0068E8_D2CRTC_UPDATE_LOCK(x) (((x) & 0x1) << 0) +#define G_0068E8_D2CRTC_UPDATE_LOCK(x) (((x) >> 0) & 0x1) +#define C_0068E8_D2CRTC_UPDATE_LOCK 0xFFFFFFFE +#define R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS 0x006910 +#define S_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0) +#define G_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS 0x00000000 +#define R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS 0x006918 +#define S_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0) +#define G_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS 0x00000000 + + +#define R_000001_MC_FB_LOCATION 0x000001 +#define S_000001_MC_FB_START(x) (((x) & 0xFFFF) << 0) +#define G_000001_MC_FB_START(x) (((x) >> 0) & 0xFFFF) +#define C_000001_MC_FB_START 0xFFFF0000 +#define S_000001_MC_FB_TOP(x) (((x) & 0xFFFF) << 16) +#define G_000001_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF) +#define C_000001_MC_FB_TOP 0x0000FFFF +#define R_000002_MC_AGP_LOCATION 0x000002 +#define S_000002_MC_AGP_START(x) (((x) & 0xFFFF) << 0) +#define G_000002_MC_AGP_START(x) (((x) >> 0) & 0xFFFF) +#define C_000002_MC_AGP_START 0xFFFF0000 +#define S_000002_MC_AGP_TOP(x) (((x) & 0xFFFF) << 16) +#define G_000002_MC_AGP_TOP(x) (((x) >> 16) & 0xFFFF) +#define C_000002_MC_AGP_TOP 0x0000FFFF +#define R_000003_MC_AGP_BASE 0x000003 +#define S_000003_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0) +#define G_000003_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_000003_AGP_BASE_ADDR 0x00000000 +#define R_000004_MC_AGP_BASE_2 0x000004 +#define S_000004_AGP_BASE_ADDR_2(x) (((x) & 0xF) << 0) +#define G_000004_AGP_BASE_ADDR_2(x) (((x) >> 0) & 0xF) +#define C_000004_AGP_BASE_ADDR_2 0xFFFFFFF0 + +#define R_00000F_CP_DYN_CNTL 0x00000F +#define S_00000F_CP_FORCEON(x) (((x) & 0x1) << 0) +#define G_00000F_CP_FORCEON(x) (((x) >> 0) & 0x1) +#define C_00000F_CP_FORCEON 0xFFFFFFFE +#define S_00000F_CP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 1) +#define G_00000F_CP_MAX_DYN_STOP_LAT(x) (((x) >> 1) & 0x1) +#define C_00000F_CP_MAX_DYN_STOP_LAT 0xFFFFFFFD +#define S_00000F_CP_CLOCK_STATUS(x) (((x) & 0x1) << 2) +#define G_00000F_CP_CLOCK_STATUS(x) (((x) >> 2) & 0x1) +#define C_00000F_CP_CLOCK_STATUS 0xFFFFFFFB +#define S_00000F_CP_PROG_SHUTOFF(x) (((x) & 0x1) << 3) +#define G_00000F_CP_PROG_SHUTOFF(x) (((x) >> 3) & 0x1) +#define C_00000F_CP_PROG_SHUTOFF 0xFFFFFFF7 +#define S_00000F_CP_PROG_DELAY_VALUE(x) (((x) & 0xFF) << 4) +#define G_00000F_CP_PROG_DELAY_VALUE(x) (((x) >> 4) & 0xFF) +#define C_00000F_CP_PROG_DELAY_VALUE 0xFFFFF00F +#define S_00000F_CP_LOWER_POWER_IDLE(x) (((x) & 0xFF) << 12) +#define G_00000F_CP_LOWER_POWER_IDLE(x) (((x) >> 12) & 0xFF) +#define C_00000F_CP_LOWER_POWER_IDLE 0xFFF00FFF +#define S_00000F_CP_LOWER_POWER_IGNORE(x) (((x) & 0x1) << 20) +#define G_00000F_CP_LOWER_POWER_IGNORE(x) (((x) >> 20) & 0x1) +#define C_00000F_CP_LOWER_POWER_IGNORE 0xFFEFFFFF +#define S_00000F_CP_NORMAL_POWER_IGNORE(x) (((x) & 0x1) << 21) +#define G_00000F_CP_NORMAL_POWER_IGNORE(x) (((x) >> 21) & 0x1) +#define C_00000F_CP_NORMAL_POWER_IGNORE 0xFFDFFFFF +#define S_00000F_SPARE(x) (((x) & 0x3) << 22) +#define G_00000F_SPARE(x) (((x) >> 22) & 0x3) +#define C_00000F_SPARE 0xFF3FFFFF +#define S_00000F_CP_NORMAL_POWER_BUSY(x) (((x) & 0xFF) << 24) +#define G_00000F_CP_NORMAL_POWER_BUSY(x) (((x) >> 24) & 0xFF) +#define C_00000F_CP_NORMAL_POWER_BUSY 0x00FFFFFF +#define R_000011_E2_DYN_CNTL 0x000011 +#define S_000011_E2_FORCEON(x) (((x) & 0x1) << 0) +#define G_000011_E2_FORCEON(x) (((x) >> 0) & 0x1) +#define C_000011_E2_FORCEON 0xFFFFFFFE +#define S_000011_E2_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 1) +#define G_000011_E2_MAX_DYN_STOP_LAT(x) (((x) >> 1) & 0x1) +#define C_000011_E2_MAX_DYN_STOP_LAT 0xFFFFFFFD +#define S_000011_E2_CLOCK_STATUS(x) (((x) & 0x1) << 2) +#define G_000011_E2_CLOCK_STATUS(x) (((x) >> 2) & 0x1) +#define C_000011_E2_CLOCK_STATUS 0xFFFFFFFB +#define S_000011_E2_PROG_SHUTOFF(x) (((x) & 0x1) << 3) +#define G_000011_E2_PROG_SHUTOFF(x) (((x) >> 3) & 0x1) +#define C_000011_E2_PROG_SHUTOFF 0xFFFFFFF7 +#define S_000011_E2_PROG_DELAY_VALUE(x) (((x) & 0xFF) << 4) +#define G_000011_E2_PROG_DELAY_VALUE(x) (((x) >> 4) & 0xFF) +#define C_000011_E2_PROG_DELAY_VALUE 0xFFFFF00F +#define S_000011_E2_LOWER_POWER_IDLE(x) (((x) & 0xFF) << 12) +#define G_000011_E2_LOWER_POWER_IDLE(x) (((x) >> 12) & 0xFF) +#define C_000011_E2_LOWER_POWER_IDLE 0xFFF00FFF +#define S_000011_E2_LOWER_POWER_IGNORE(x) (((x) & 0x1) << 20) +#define G_000011_E2_LOWER_POWER_IGNORE(x) (((x) >> 20) & 0x1) +#define C_000011_E2_LOWER_POWER_IGNORE 0xFFEFFFFF +#define S_000011_E2_NORMAL_POWER_IGNORE(x) (((x) & 0x1) << 21) +#define G_000011_E2_NORMAL_POWER_IGNORE(x) (((x) >> 21) & 0x1) +#define C_000011_E2_NORMAL_POWER_IGNORE 0xFFDFFFFF +#define S_000011_SPARE(x) (((x) & 0x3) << 22) +#define G_000011_SPARE(x) (((x) >> 22) & 0x3) +#define C_000011_SPARE 0xFF3FFFFF +#define S_000011_E2_NORMAL_POWER_BUSY(x) (((x) & 0xFF) << 24) +#define G_000011_E2_NORMAL_POWER_BUSY(x) (((x) >> 24) & 0xFF) +#define C_000011_E2_NORMAL_POWER_BUSY 0x00FFFFFF +#define R_000013_IDCT_DYN_CNTL 0x000013 +#define S_000013_IDCT_FORCEON(x) (((x) & 0x1) << 0) +#define G_000013_IDCT_FORCEON(x) (((x) >> 0) & 0x1) +#define C_000013_IDCT_FORCEON 0xFFFFFFFE +#define S_000013_IDCT_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 1) +#define G_000013_IDCT_MAX_DYN_STOP_LAT(x) (((x) >> 1) & 0x1) +#define C_000013_IDCT_MAX_DYN_STOP_LAT 0xFFFFFFFD +#define S_000013_IDCT_CLOCK_STATUS(x) (((x) & 0x1) << 2) +#define G_000013_IDCT_CLOCK_STATUS(x) (((x) >> 2) & 0x1) +#define C_000013_IDCT_CLOCK_STATUS 0xFFFFFFFB +#define S_000013_IDCT_PROG_SHUTOFF(x) (((x) & 0x1) << 3) +#define G_000013_IDCT_PROG_SHUTOFF(x) (((x) >> 3) & 0x1) +#define C_000013_IDCT_PROG_SHUTOFF 0xFFFFFFF7 +#define S_000013_IDCT_PROG_DELAY_VALUE(x) (((x) & 0xFF) << 4) +#define G_000013_IDCT_PROG_DELAY_VALUE(x) (((x) >> 4) & 0xFF) +#define C_000013_IDCT_PROG_DELAY_VALUE 0xFFFFF00F +#define S_000013_IDCT_LOWER_POWER_IDLE(x) (((x) & 0xFF) << 12) +#define G_000013_IDCT_LOWER_POWER_IDLE(x) (((x) >> 12) & 0xFF) +#define C_000013_IDCT_LOWER_POWER_IDLE 0xFFF00FFF +#define S_000013_IDCT_LOWER_POWER_IGNORE(x) (((x) & 0x1) << 20) +#define G_000013_IDCT_LOWER_POWER_IGNORE(x) (((x) >> 20) & 0x1) +#define C_000013_IDCT_LOWER_POWER_IGNORE 0xFFEFFFFF +#define S_000013_IDCT_NORMAL_POWER_IGNORE(x) (((x) & 0x1) << 21) +#define G_000013_IDCT_NORMAL_POWER_IGNORE(x) (((x) >> 21) & 0x1) +#define C_000013_IDCT_NORMAL_POWER_IGNORE 0xFFDFFFFF +#define S_000013_SPARE(x) (((x) & 0x3) << 22) +#define G_000013_SPARE(x) (((x) >> 22) & 0x3) +#define C_000013_SPARE 0xFF3FFFFF +#define S_000013_IDCT_NORMAL_POWER_BUSY(x) (((x) & 0xFF) << 24) +#define G_000013_IDCT_NORMAL_POWER_BUSY(x) (((x) >> 24) & 0xFF) +#define C_000013_IDCT_NORMAL_POWER_BUSY 0x00FFFFFF + +#endif diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index b574c73a510..e0b97d16139 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -31,8 +31,8 @@ #include "radeon.h" #include "radeon_drm.h" #include "rv770d.h" -#include "avivod.h" #include "atom.h" +#include "avivod.h" #define R700_PFP_UCODE_SIZE 848 #define R700_PM4_UCODE_SIZE 1360 @@ -231,7 +231,7 @@ static void rv770_mc_resume(struct radeon_device *rdev) /* we need to own VRAM, so turn off the VGA renderer here * to stop it overwriting our objects */ - radeon_avivo_vga_render_disable(rdev); + rv515_vga_render_disable(rdev); } @@ -801,6 +801,13 @@ int rv770_mc_init(struct radeon_device *rdev) /* Setup GPU memory space */ rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE); rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE); + + if (rdev->mc.mc_vram_size > rdev->mc.aper_size) + rdev->mc.mc_vram_size = rdev->mc.aper_size; + + if (rdev->mc.real_vram_size > rdev->mc.aper_size) + rdev->mc.real_vram_size = rdev->mc.aper_size; + if (rdev->flags & RADEON_IS_AGP) { r = radeon_agp_init(rdev); if (r) diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index ea955edde87..2a7a85a6dc3 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -915,7 +915,7 @@ static int watchdog_ioctl(struct inode *inode, struct file *filp, return ret; } -static struct file_operations watchdog_fops = { +static const struct file_operations watchdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .open = watchdog_open, diff --git a/drivers/input/input.c b/drivers/input/input.c index e828aab7dac..16ec33f27c5 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1273,6 +1273,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) } \ } while (0) +#ifdef CONFIG_PM static void input_dev_reset(struct input_dev *dev, bool activate) { if (!dev->event) @@ -1287,7 +1288,6 @@ static void input_dev_reset(struct input_dev *dev, bool activate) } } -#ifdef CONFIG_PM static int input_dev_suspend(struct device *dev) { struct input_dev *input_dev = to_input_dev(dev); diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig index bde55d7287f..eadc1cd34a2 100644 --- a/drivers/isdn/hardware/mISDN/Kconfig +++ b/drivers/isdn/hardware/mISDN/Kconfig @@ -78,6 +78,7 @@ config MISDN_NETJET depends on PCI select MISDN_IPAC select ISDN_HDLC + select ISDN_I4L help Enable support for Traverse Technologies NETJet PCI cards. diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig index dd744ffd240..07c4e49f9e7 100644 --- a/drivers/isdn/i4l/Kconfig +++ b/drivers/isdn/i4l/Kconfig @@ -141,8 +141,7 @@ endmenu endif config ISDN_HDLC - tristate - depends on HISAX_ST5481 + tristate select CRC_CCITT select BITREVERSE diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index c36f5213745..feb0fa45b66 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -415,7 +415,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) } static int data_sock_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int len) + char __user *optval, unsigned int len) { struct sock *sk = sock->sk; int err = 0, opt = 0; diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index b4d3f7ca554..bd1632388e4 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -508,7 +508,7 @@ static int close(struct inode *inode, struct file *file) * uses: reading and writing a character device called /dev/lguest. All the * work happens in the read(), write() and close() routines: */ -static struct file_operations lguest_fops = { +static const struct file_operations lguest_fops = { .owner = THIS_MODULE, .release = close, .write = write, diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 3750ff48cba..51641498359 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -1203,7 +1203,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations dvb_dvr_fops = { +static const struct file_operations dvb_dvr_fops = { .owner = THIS_MODULE, .read = dvb_dvr_read, .write = dvb_dvr_write, diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c index eeb80d0ea3f..853e04b7cb3 100644 --- a/drivers/media/dvb/firewire/firedtv-ci.c +++ b/drivers/media/dvb/firewire/firedtv-ci.c @@ -215,7 +215,7 @@ static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait) return POLLIN; } -static struct file_operations fdtv_ca_fops = { +static const struct file_operations fdtv_ca_fops = { .owner = THIS_MODULE, .ioctl = dvb_generic_ioctl, .open = dvb_generic_open, diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index fa57b67593a..90a95ce8dc3 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -271,7 +271,7 @@ static unsigned int phantom_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations phantom_file_ops = { +static const struct file_operations phantom_file_ops = { .open = phantom_open, .release = phantom_release, .unlocked_ioctl = phantom_ioctl, diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 300e7ba391a..41c8fe2a928 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -53,7 +53,6 @@ struct gru_stats_s gru_stats; /* Guaranteed user available resources on each node */ static int max_user_cbrs, max_user_dsr_bytes; -static struct file_operations gru_fops; static struct miscdevice gru_miscdev; @@ -426,7 +425,7 @@ static void __exit gru_exit(void) gru_proc_exit(); } -static struct file_operations gru_fops = { +static const struct file_operations gru_fops = { .owner = THIS_MODULE, .unlocked_ioctl = gru_file_unlocked_ioctl, .mmap = gru_file_mmap, diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 610dbd1fcc8..96d10f40fb2 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -240,7 +240,7 @@ static int mmc_ext_csd_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations mmc_dbg_ext_csd_fops = { +static const struct file_operations mmc_dbg_ext_csd_fops = { .open = mmc_ext_csd_open, .read = mmc_ext_csd_read, .release = mmc_ext_csd_release, diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index 6636354b48c..e1035c89580 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -98,6 +98,22 @@ static const unsigned char speed_val[16] = static const unsigned int speed_unit[8] = { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 }; +/* FUNCE tuples with these types get passed to SDIO drivers */ +static const unsigned char funce_type_whitelist[] = { + 4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */ +}; + +static int cistpl_funce_whitelisted(unsigned char type) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) { + if (funce_type_whitelist[i] == type) + return 1; + } + return 0; +} + static int cistpl_funce_common(struct mmc_card *card, const unsigned char *buf, unsigned size) { @@ -120,6 +136,10 @@ static int cistpl_funce_func(struct sdio_func *func, unsigned vsn; unsigned min_size; + /* let SDIO drivers take care of whitelisted FUNCE tuples */ + if (cistpl_funce_whitelisted(buf[0])) + return -EILSEQ; + vsn = func->card->cccr.sdio_vsn; min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42; @@ -154,13 +174,12 @@ static int cistpl_funce(struct mmc_card *card, struct sdio_func *func, else ret = cistpl_funce_common(card, buf, size); - if (ret) { + if (ret && ret != -EILSEQ) { printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u " "type %u\n", mmc_hostname(card->host), size, buf[0]); - return ret; } - return 0; + return ret; } typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *, @@ -253,21 +272,12 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++) if (cis_tpl_list[i].code == tpl_code) break; - if (i >= ARRAY_SIZE(cis_tpl_list)) { - /* this tuple is unknown to the core */ - this->next = NULL; - this->code = tpl_code; - this->size = tpl_link; - *prev = this; - prev = &this->next; - printk(KERN_DEBUG - "%s: queuing CIS tuple 0x%02x length %u\n", - mmc_hostname(card->host), tpl_code, tpl_link); - } else { + if (i < ARRAY_SIZE(cis_tpl_list)) { const struct cis_tpl *tpl = cis_tpl_list + i; if (tpl_link < tpl->min_size) { printk(KERN_ERR - "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n", + "%s: bad CIS tuple 0x%02x" + " (length = %u, expected >= %u)\n", mmc_hostname(card->host), tpl_code, tpl_link, tpl->min_size); ret = -EINVAL; @@ -275,7 +285,30 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) ret = tpl->parse(card, func, this->data, tpl_link); } - kfree(this); + /* + * We don't need the tuple anymore if it was + * successfully parsed by the SDIO core or if it is + * not going to be parsed by SDIO drivers. + */ + if (!ret || ret != -EILSEQ) + kfree(this); + } else { + /* unknown tuple */ + ret = -EILSEQ; + } + + if (ret == -EILSEQ) { + /* this tuple is unknown to the core or whitelisted */ + this->next = NULL; + this->code = tpl_code; + this->size = tpl_link; + *prev = this; + prev = &this->next; + printk(KERN_DEBUG + "%s: queuing CIS tuple 0x%02x length %u\n", + mmc_hostname(card->host), tpl_code, tpl_link); + /* keep on analyzing tuples */ + ret = 0; } ptr += tpl_link; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 7cb057f3f88..432ae8358c8 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -276,6 +276,47 @@ config MMC_S3C If unsure, say N. +config MMC_S3C_HW_SDIO_IRQ + bool "Hardware support for SDIO IRQ" + depends on MMC_S3C + help + Enable the hardware support for SDIO interrupts instead of using + the generic polling code. + +choice + prompt "Samsung S3C SD/MMC transfer code" + depends on MMC_S3C + +config MMC_S3C_PIO + bool "Use PIO transfers only" + help + Use PIO to transfer data between memory and the hardware. + + PIO is slower than DMA as it requires CPU instructions to + move the data. This has been the traditional default for + the S3C MCI driver. + +config MMC_S3C_DMA + bool "Use DMA transfers only (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + Use DMA to transfer data between memory and the hardare. + + Currently, the DMA support in this driver seems to not be + working properly and needs to be debugged before this + option is useful. + +config MMC_S3C_PIODMA + bool "Support for both PIO and DMA (EXPERIMENTAL)" + help + Compile both the PIO and DMA transfer routines into the + driver and let the platform select at run-time which one + is best. + + See notes for the DMA option. + +endchoice + config MMC_SDRICOH_CS tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI && PCMCIA diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 8c08cd7efa7..99b74a35102 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -17,6 +17,8 @@ #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/cpufreq.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/gpio.h> #include <linux/irq.h> #include <linux/io.h> @@ -58,8 +60,6 @@ static const int dbgmap_debug = dbg_err | dbg_debug; dev_dbg(&host->pdev->dev, args); \ } while (0) -#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) - static struct s3c2410_dma_client s3cmci_dma_client = { .name = "s3c-mci", }; @@ -164,6 +164,40 @@ static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } #endif /* CONFIG_MMC_DEBUG */ +/** + * s3cmci_host_usedma - return whether the host is using dma or pio + * @host: The host state + * + * Return true if the host is using DMA to transfer data, else false + * to use PIO mode. Will return static data depending on the driver + * configuration. + */ +static inline bool s3cmci_host_usedma(struct s3cmci_host *host) +{ +#ifdef CONFIG_MMC_S3C_PIO + return false; +#elif defined(CONFIG_MMC_S3C_DMA) + return true; +#else + return host->dodma; +#endif +} + +/** + * s3cmci_host_canpio - return true if host has pio code available + * + * Return true if the driver has been compiled with the PIO support code + * available. + */ +static inline bool s3cmci_host_canpio(void) +{ +#ifdef CONFIG_MMC_S3C_PIO + return true; +#else + return false; +#endif +} + static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) { u32 newmask; @@ -190,7 +224,33 @@ static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) static inline void clear_imask(struct s3cmci_host *host) { - writel(0, host->base + host->sdiimsk); + u32 mask = readl(host->base + host->sdiimsk); + + /* preserve the SDIO IRQ mask state */ + mask &= S3C2410_SDIIMSK_SDIOIRQ; + writel(mask, host->base + host->sdiimsk); +} + +/** + * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled + * @host: The host to check. + * + * Test to see if the SDIO interrupt is being signalled in case the + * controller has failed to re-detect a card interrupt. Read GPE8 and + * see if it is low and if so, signal a SDIO interrupt. + * + * This is currently called if a request is finished (we assume that the + * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is + * already being indicated. +*/ +static void s3cmci_check_sdio_irq(struct s3cmci_host *host) +{ + if (host->sdio_irqen) { + if (gpio_get_value(S3C2410_GPE(8)) == 0) { + printk(KERN_DEBUG "%s: signalling irq\n", __func__); + mmc_signal_sdio_irq(host->mmc); + } + } } static inline int get_data_buffer(struct s3cmci_host *host, @@ -238,6 +298,64 @@ static inline u32 fifo_free(struct s3cmci_host *host) return 63 - fifostat; } +/** + * s3cmci_enable_irq - enable IRQ, after having disabled it. + * @host: The device state. + * @more: True if more IRQs are expected from transfer. + * + * Enable the main IRQ if needed after it has been disabled. + * + * The IRQ can be one of the following states: + * - disabled during IDLE + * - disabled whilst processing data + * - enabled during transfer + * - enabled whilst awaiting SDIO interrupt detection + */ +static void s3cmci_enable_irq(struct s3cmci_host *host, bool more) +{ + unsigned long flags; + bool enable = false; + + local_irq_save(flags); + + host->irq_enabled = more; + host->irq_disabled = false; + + enable = more | host->sdio_irqen; + + if (host->irq_state != enable) { + host->irq_state = enable; + + if (enable) + enable_irq(host->irq); + else + disable_irq(host->irq); + } + + local_irq_restore(flags); +} + +/** + * + */ +static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer) +{ + unsigned long flags; + + local_irq_save(flags); + + //printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer); + + host->irq_disabled = transfer; + + if (transfer && host->irq_state) { + host->irq_state = false; + disable_irq(host->irq); + } + + local_irq_restore(flags); +} + static void do_pio_read(struct s3cmci_host *host) { int res; @@ -374,8 +492,7 @@ static void pio_tasklet(unsigned long data) { struct s3cmci_host *host = (struct s3cmci_host *) data; - - disable_irq(host->irq); + s3cmci_disable_irq(host, true); if (host->pio_active == XFER_WRITE) do_pio_write(host); @@ -395,9 +512,10 @@ static void pio_tasklet(unsigned long data) host->mrq->data->error = -EINVAL; } + s3cmci_enable_irq(host, false); finalize_request(host); } else - enable_irq(host->irq); + s3cmci_enable_irq(host, true); } /* @@ -432,17 +550,27 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) struct s3cmci_host *host = dev_id; struct mmc_command *cmd; u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; - u32 mci_cclear, mci_dclear; + u32 mci_cclear = 0, mci_dclear; unsigned long iflags; + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_imsk = readl(host->base + host->sdiimsk); + + if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) { + if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) { + mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT; + writel(mci_dclear, host->base + S3C2410_SDIDSTA); + + mmc_signal_sdio_irq(host->mmc); + return IRQ_HANDLED; + } + } + spin_lock_irqsave(&host->complete_lock, iflags); mci_csta = readl(host->base + S3C2410_SDICMDSTAT); - mci_dsta = readl(host->base + S3C2410_SDIDSTA); mci_dcnt = readl(host->base + S3C2410_SDIDCNT); mci_fsta = readl(host->base + S3C2410_SDIFSTA); - mci_imsk = readl(host->base + host->sdiimsk); - mci_cclear = 0; mci_dclear = 0; if ((host->complete_what == COMPLETION_NONE) || @@ -466,7 +594,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) goto irq_out; } - if (!host->dodma) { + if (!s3cmci_host_usedma(host)) { if ((host->pio_active == XFER_WRITE) && (mci_fsta & S3C2410_SDIFSTA_TFDET)) { @@ -673,6 +801,7 @@ static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", size, mci_dsta, mci_dcnt); + host->dma_complete = 1; host->complete_what = COMPLETION_FINALIZE; out: @@ -683,9 +812,9 @@ out: fail_request: host->mrq->data->error = -EINVAL; host->complete_what = COMPLETION_FINALIZE; - writel(0, host->base + host->sdiimsk); - goto out; + clear_imask(host); + goto out; } static void finalize_request(struct s3cmci_host *host) @@ -702,8 +831,9 @@ static void finalize_request(struct s3cmci_host *host) if (cmd->data && (cmd->error == 0) && (cmd->data->error == 0)) { - if (host->dodma && (!host->dma_complete)) { - dbg(host, dbg_dma, "DMA Missing!\n"); + if (s3cmci_host_usedma(host) && (!host->dma_complete)) { + dbg(host, dbg_dma, "DMA Missing (%d)!\n", + host->dma_complete); return; } } @@ -728,7 +858,7 @@ static void finalize_request(struct s3cmci_host *host) writel(0, host->base + S3C2410_SDICMDARG); writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); writel(0, host->base + S3C2410_SDICMDCON); - writel(0, host->base + host->sdiimsk); + clear_imask(host); if (cmd->data && cmd->error) cmd->data->error = cmd->error; @@ -754,7 +884,7 @@ static void finalize_request(struct s3cmci_host *host) /* If we had an error while transfering data we flush the * DMA channel and the fifo to clear out any garbage. */ if (mrq->data->error != 0) { - if (host->dodma) + if (s3cmci_host_usedma(host)) s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); if (host->is2440) { @@ -776,6 +906,8 @@ static void finalize_request(struct s3cmci_host *host) request_done: host->complete_what = COMPLETION_NONE; host->mrq = NULL; + + s3cmci_check_sdio_irq(host); mmc_request_done(host->mmc, mrq); } @@ -872,7 +1004,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; - if (host->dodma) + if (s3cmci_host_usedma(host)) dcon |= S3C2410_SDIDCON_DMAEN; if (host->bus_width == MMC_BUS_WIDTH_4) @@ -950,7 +1082,7 @@ static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) { int dma_len, i; - int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + int rw = data->flags & MMC_DATA_WRITE; BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); @@ -958,7 +1090,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); if (dma_len == 0) return -ENOMEM; @@ -969,11 +1101,11 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) for (i = 0; i < dma_len; i++) { int res; - dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, - sg_dma_address(&data->sg[i]), - sg_dma_len(&data->sg[i])); + dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); - res = s3c2410_dma_enqueue(host->dma, (void *) host, + res = s3c2410_dma_enqueue(host->dma, host, sg_dma_address(&data->sg[i]), sg_dma_len(&data->sg[i])); @@ -1018,7 +1150,7 @@ static void s3cmci_send_request(struct mmc_host *mmc) return; } - if (host->dodma) + if (s3cmci_host_usedma(host)) res = s3cmci_prepare_dma(host, cmd->data); else res = s3cmci_prepare_pio(host, cmd->data); @@ -1037,7 +1169,7 @@ static void s3cmci_send_request(struct mmc_host *mmc) s3cmci_send_command(host, cmd); /* Enable Interrupt */ - enable_irq(host->irq); + s3cmci_enable_irq(host, true); } static int s3cmci_card_present(struct mmc_host *mmc) @@ -1049,7 +1181,7 @@ static int s3cmci_card_present(struct mmc_host *mmc) if (pdata->gpio_detect == 0) return -ENOSYS; - ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1; + ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1; return ret ^ pdata->detect_invert; } @@ -1104,12 +1236,12 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->power_mode) { case MMC_POWER_ON: case MMC_POWER_UP: - s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); - s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); - s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); - s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); - s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); - s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD); + s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0); + s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); + s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2); + s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3); if (host->pdata->set_power) host->pdata->set_power(ios->power_mode, ios->vdd); @@ -1121,8 +1253,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: default: - s3c2410_gpio_setpin(S3C2410_GPE5, 0); - s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT); + gpio_direction_output(S3C2410_GPE(5), 0); if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; @@ -1168,7 +1299,7 @@ static int s3cmci_get_ro(struct mmc_host *mmc) struct s3c24xx_mci_pdata *pdata = host->pdata; int ret; - if (pdata->gpio_wprotect == 0) + if (pdata->no_wprotect) return 0; ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); @@ -1179,11 +1310,52 @@ static int s3cmci_get_ro(struct mmc_host *mmc) return ret; } +static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct s3cmci_host *host = mmc_priv(mmc); + unsigned long flags; + u32 con; + + local_irq_save(flags); + + con = readl(host->base + S3C2410_SDICON); + host->sdio_irqen = enable; + + if (enable == host->sdio_irqen) + goto same_state; + + if (enable) { + con |= S3C2410_SDICON_SDIOIRQ; + enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ); + + if (!host->irq_state && !host->irq_disabled) { + host->irq_state = true; + enable_irq(host->irq); + } + } else { + disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ); + con &= ~S3C2410_SDICON_SDIOIRQ; + + if (!host->irq_enabled && host->irq_state) { + disable_irq_nosync(host->irq); + host->irq_state = false; + } + } + + writel(con, host->base + S3C2410_SDICON); + + same_state: + local_irq_restore(flags); + + s3cmci_check_sdio_irq(host); +} + static struct mmc_host_ops s3cmci_ops = { .request = s3cmci_request, .set_ios = s3cmci_set_ios, .get_ro = s3cmci_get_ro, .get_cd = s3cmci_card_present, + .enable_sdio_irq = s3cmci_enable_sdio_irq, }; static struct s3c24xx_mci_pdata s3cmci_def_pdata = { @@ -1246,11 +1418,140 @@ static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host) } #endif -static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) + +#ifdef CONFIG_DEBUG_FS + +static int s3cmci_state_show(struct seq_file *seq, void *v) +{ + struct s3cmci_host *host = seq->private; + + seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base); + seq_printf(seq, "Clock rate = %ld\n", host->clk_rate); + seq_printf(seq, "Prescale = %d\n", host->prescaler); + seq_printf(seq, "is2440 = %d\n", host->is2440); + seq_printf(seq, "IRQ = %d\n", host->irq); + seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled); + seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled); + seq_printf(seq, "IRQ state = %d\n", host->irq_state); + seq_printf(seq, "CD IRQ = %d\n", host->irq_cd); + seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host)); + seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk); + seq_printf(seq, "SDIDATA at %d\n", host->sdidata); + + return 0; +} + +static int s3cmci_state_open(struct inode *inode, struct file *file) +{ + return single_open(file, s3cmci_state_show, inode->i_private); +} + +static const struct file_operations s3cmci_fops_state = { + .owner = THIS_MODULE, + .open = s3cmci_state_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r } + +struct s3cmci_reg { + unsigned short addr; + unsigned char *name; +} debug_regs[] = { + DBG_REG(CON), + DBG_REG(PRE), + DBG_REG(CMDARG), + DBG_REG(CMDCON), + DBG_REG(CMDSTAT), + DBG_REG(RSP0), + DBG_REG(RSP1), + DBG_REG(RSP2), + DBG_REG(RSP3), + DBG_REG(TIMER), + DBG_REG(BSIZE), + DBG_REG(DCON), + DBG_REG(DCNT), + DBG_REG(DSTA), + DBG_REG(FSTA), + {} +}; + +static int s3cmci_regs_show(struct seq_file *seq, void *v) +{ + struct s3cmci_host *host = seq->private; + struct s3cmci_reg *rptr = debug_regs; + + for (; rptr->name; rptr++) + seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name, + readl(host->base + rptr->addr)); + + seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk)); + + return 0; +} + +static int s3cmci_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, s3cmci_regs_show, inode->i_private); +} + +static const struct file_operations s3cmci_fops_regs = { + .owner = THIS_MODULE, + .open = s3cmci_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void s3cmci_debugfs_attach(struct s3cmci_host *host) +{ + struct device *dev = &host->pdev->dev; + + host->debug_root = debugfs_create_dir(dev_name(dev), NULL); + if (IS_ERR(host->debug_root)) { + dev_err(dev, "failed to create debugfs root\n"); + return; + } + + host->debug_state = debugfs_create_file("state", 0444, + host->debug_root, host, + &s3cmci_fops_state); + + if (IS_ERR(host->debug_state)) + dev_err(dev, "failed to create debug state file\n"); + + host->debug_regs = debugfs_create_file("regs", 0444, + host->debug_root, host, + &s3cmci_fops_regs); + + if (IS_ERR(host->debug_regs)) + dev_err(dev, "failed to create debug regs file\n"); +} + +static void s3cmci_debugfs_remove(struct s3cmci_host *host) +{ + debugfs_remove(host->debug_regs); + debugfs_remove(host->debug_state); + debugfs_remove(host->debug_root); +} + +#else +static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { } +static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } + +#endif /* CONFIG_DEBUG_FS */ + +static int __devinit s3cmci_probe(struct platform_device *pdev) { struct s3cmci_host *host; struct mmc_host *mmc; int ret; + int is2440; + int i; + + is2440 = platform_get_device_id(pdev)->driver_data; mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); if (!mmc) { @@ -1258,6 +1559,18 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) goto probe_out; } + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { + ret = gpio_request(i, dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "failed to get gpio %d\n", i); + + for (i--; i >= S3C2410_GPE(5); i--) + gpio_free(i); + + goto probe_free_host; + } + } + host = mmc_priv(mmc); host->mmc = mmc; host->pdev = pdev; @@ -1282,11 +1595,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->clk_div = 2; } - host->dodma = 0; host->complete_what = COMPLETION_NONE; host->pio_active = XFER_NONE; - host->dma = S3CMCI_DMA; +#ifdef CONFIG_MMC_S3C_PIODMA + host->dodma = host->pdata->dma; +#endif host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { @@ -1294,19 +1608,19 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) "failed to get io memory region resouce.\n"); ret = -ENOENT; - goto probe_free_host; + goto probe_free_gpio; } host->mem = request_mem_region(host->mem->start, - RESSIZE(host->mem), pdev->name); + resource_size(host->mem), pdev->name); if (!host->mem) { dev_err(&pdev->dev, "failed to request io memory region.\n"); ret = -ENOENT; - goto probe_free_host; + goto probe_free_gpio; } - host->base = ioremap(host->mem->start, RESSIZE(host->mem)); + host->base = ioremap(host->mem->start, resource_size(host->mem)); if (!host->base) { dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); ret = -EINVAL; @@ -1331,31 +1645,60 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) * ensure we don't lock the system with un-serviceable requests. */ disable_irq(host->irq); + host->irq_state = false; - host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); - - if (host->irq_cd >= 0) { - if (request_irq(host->irq_cd, s3cmci_irq_cd, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - DRIVER_NAME, host)) { - dev_err(&pdev->dev, "can't get card detect irq.\n"); - ret = -ENOENT; + if (!host->pdata->no_detect) { + ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect"); + if (ret) { + dev_err(&pdev->dev, "failed to get detect gpio\n"); goto probe_free_irq; } - } else { - dev_warn(&pdev->dev, "host detect has no irq available\n"); - s3c2410_gpio_cfgpin(host->pdata->gpio_detect, - S3C2410_GPIO_INPUT); + + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); + + if (host->irq_cd >= 0) { + if (request_irq(host->irq_cd, s3cmci_irq_cd, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + DRIVER_NAME, host)) { + dev_err(&pdev->dev, + "can't get card detect irq.\n"); + ret = -ENOENT; + goto probe_free_gpio_cd; + } + } else { + dev_warn(&pdev->dev, + "host detect has no irq available\n"); + gpio_direction_input(host->pdata->gpio_detect); + } + } else + host->irq_cd = -1; + + if (!host->pdata->no_wprotect) { + ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp"); + if (ret) { + dev_err(&pdev->dev, "failed to get writeprotect\n"); + goto probe_free_irq_cd; + } + + gpio_direction_input(host->pdata->gpio_wprotect); } - if (host->pdata->gpio_wprotect) - s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, - S3C2410_GPIO_INPUT); + /* depending on the dma state, get a dma channel to use. */ - if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) { - dev_err(&pdev->dev, "unable to get DMA channel.\n"); - ret = -EBUSY; - goto probe_free_irq_cd; + if (s3cmci_host_usedma(host)) { + host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client, + host); + if (host->dma < 0) { + dev_err(&pdev->dev, "cannot get DMA channel.\n"); + if (!s3cmci_host_canpio()) { + ret = -EBUSY; + goto probe_free_gpio_wp; + } else { + dev_warn(&pdev->dev, "falling back to PIO.\n"); + host->dodma = 0; + } + } } host->clk = clk_get(&pdev->dev, "sdi"); @@ -1363,7 +1706,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) dev_err(&pdev->dev, "failed to find clock source.\n"); ret = PTR_ERR(host->clk); host->clk = NULL; - goto probe_free_host; + goto probe_free_dma; } ret = clk_enable(host->clk); @@ -1376,7 +1719,11 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) mmc->ops = &s3cmci_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; +#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; +#else mmc->caps = MMC_CAP_4_BIT_DATA; +#endif mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; @@ -1408,8 +1755,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) goto free_cpufreq; } + s3cmci_debugfs_attach(host); + platform_set_drvdata(pdev, mmc); - dev_info(&pdev->dev, "initialisation done.\n"); + dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc), + s3cmci_host_usedma(host) ? "dma" : "pio", + mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw"); return 0; @@ -1422,6 +1773,18 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) clk_free: clk_put(host->clk); + probe_free_dma: + if (s3cmci_host_usedma(host)) + s3c2410_dma_free(host->dma, &s3cmci_dma_client); + + probe_free_gpio_wp: + if (!host->pdata->no_wprotect) + gpio_free(host->pdata->gpio_wprotect); + + probe_free_gpio_cd: + if (!host->pdata->no_detect) + gpio_free(host->pdata->gpio_detect); + probe_free_irq_cd: if (host->irq_cd >= 0) free_irq(host->irq_cd, host); @@ -1433,10 +1796,15 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) iounmap(host->base); probe_free_mem_region: - release_mem_region(host->mem->start, RESSIZE(host->mem)); + release_mem_region(host->mem->start, resource_size(host->mem)); + + probe_free_gpio: + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) + gpio_free(i); probe_free_host: mmc_free_host(mmc); + probe_out: return ret; } @@ -1449,6 +1817,7 @@ static void s3cmci_shutdown(struct platform_device *pdev) if (host->irq_cd >= 0) free_irq(host->irq_cd, host); + s3cmci_debugfs_remove(host); s3cmci_cpufreq_deregister(host); mmc_remove_host(mmc); clk_disable(host->clk); @@ -1458,104 +1827,102 @@ static int __devexit s3cmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct s3cmci_host *host = mmc_priv(mmc); + struct s3c24xx_mci_pdata *pd = host->pdata; + int i; s3cmci_shutdown(pdev); clk_put(host->clk); tasklet_disable(&host->pio_tasklet); - s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client); + + if (s3cmci_host_usedma(host)) + s3c2410_dma_free(host->dma, &s3cmci_dma_client); free_irq(host->irq, host); + if (!pd->no_wprotect) + gpio_free(pd->gpio_wprotect); + + if (!pd->no_detect) + gpio_free(pd->gpio_detect); + + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) + gpio_free(i); + + iounmap(host->base); - release_mem_region(host->mem->start, RESSIZE(host->mem)); + release_mem_region(host->mem->start, resource_size(host->mem)); mmc_free_host(mmc); return 0; } -static int __devinit s3cmci_2410_probe(struct platform_device *dev) -{ - return s3cmci_probe(dev, 0); -} +static struct platform_device_id s3cmci_driver_ids[] = { + { + .name = "s3c2410-sdi", + .driver_data = 0, + }, { + .name = "s3c2412-sdi", + .driver_data = 1, + }, { + .name = "s3c2440-sdi", + .driver_data = 1, + }, + { } +}; -static int __devinit s3cmci_2412_probe(struct platform_device *dev) -{ - return s3cmci_probe(dev, 1); -} +MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids); -static int __devinit s3cmci_2440_probe(struct platform_device *dev) -{ - return s3cmci_probe(dev, 1); -} #ifdef CONFIG_PM -static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) +static int s3cmci_suspend(struct device *dev) { - struct mmc_host *mmc = platform_get_drvdata(dev); + struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev)); + struct pm_message event = { PM_EVENT_SUSPEND }; - return mmc_suspend_host(mmc, state); + return mmc_suspend_host(mmc, event); } -static int s3cmci_resume(struct platform_device *dev) +static int s3cmci_resume(struct device *dev) { - struct mmc_host *mmc = platform_get_drvdata(dev); + struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev)); return mmc_resume_host(mmc); } -#else /* CONFIG_PM */ -#define s3cmci_suspend NULL -#define s3cmci_resume NULL -#endif /* CONFIG_PM */ - - -static struct platform_driver s3cmci_2410_driver = { - .driver.name = "s3c2410-sdi", - .driver.owner = THIS_MODULE, - .probe = s3cmci_2410_probe, - .remove = __devexit_p(s3cmci_remove), - .shutdown = s3cmci_shutdown, +static struct dev_pm_ops s3cmci_pm = { .suspend = s3cmci_suspend, .resume = s3cmci_resume, }; -static struct platform_driver s3cmci_2412_driver = { - .driver.name = "s3c2412-sdi", - .driver.owner = THIS_MODULE, - .probe = s3cmci_2412_probe, - .remove = __devexit_p(s3cmci_remove), - .shutdown = s3cmci_shutdown, - .suspend = s3cmci_suspend, - .resume = s3cmci_resume, -}; +#define s3cmci_pm_ops &s3cmci_pm +#else /* CONFIG_PM */ +#define s3cmci_pm_ops NULL +#endif /* CONFIG_PM */ -static struct platform_driver s3cmci_2440_driver = { - .driver.name = "s3c2440-sdi", - .driver.owner = THIS_MODULE, - .probe = s3cmci_2440_probe, + +static struct platform_driver s3cmci_driver = { + .driver = { + .name = "s3c-sdi", + .owner = THIS_MODULE, + .pm = s3cmci_pm_ops, + }, + .id_table = s3cmci_driver_ids, + .probe = s3cmci_probe, .remove = __devexit_p(s3cmci_remove), .shutdown = s3cmci_shutdown, - .suspend = s3cmci_suspend, - .resume = s3cmci_resume, }; - static int __init s3cmci_init(void) { - platform_driver_register(&s3cmci_2410_driver); - platform_driver_register(&s3cmci_2412_driver); - platform_driver_register(&s3cmci_2440_driver); - return 0; + return platform_driver_register(&s3cmci_driver); } static void __exit s3cmci_exit(void) { - platform_driver_unregister(&s3cmci_2410_driver); - platform_driver_unregister(&s3cmci_2412_driver); - platform_driver_unregister(&s3cmci_2440_driver); + platform_driver_unregister(&s3cmci_driver); } module_init(s3cmci_init); @@ -1564,6 +1931,3 @@ module_exit(s3cmci_exit); MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>"); -MODULE_ALIAS("platform:s3c2410-sdi"); -MODULE_ALIAS("platform:s3c2412-sdi"); -MODULE_ALIAS("platform:s3c2440-sdi"); diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index ca1ba3d58cf..c76b53dbeb6 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -8,9 +8,6 @@ * published by the Free Software Foundation. */ -/* FIXME: DMA Resource management ?! */ -#define S3CMCI_DMA 0 - enum s3cmci_waitfor { COMPLETION_NONE, COMPLETION_FINALIZE, @@ -42,6 +39,11 @@ struct s3cmci_host { int dodma; int dmatogo; + bool irq_disabled; + bool irq_enabled; + bool irq_state; + int sdio_irqen; + struct mmc_request *mrq; int cmd_is_stop; @@ -68,6 +70,12 @@ struct s3cmci_host { unsigned int ccnt, dcnt; struct tasklet_struct pio_tasklet; +#ifdef CONFIG_DEBUG_FS + struct dentry *debug_root; + struct dentry *debug_state; + struct dentry *debug_regs; +#endif + #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 1a4f89c66a2..42e2b7e21c2 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -149,7 +149,6 @@ do { \ #define AUTO_ALL_MODES 0 #define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_ICH8_APME 0x0004 #define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE @@ -293,7 +292,6 @@ struct e1000_adapter { u64 hw_csum_err; u64 hw_csum_good; - u64 rx_hdr_split; u32 alloc_rx_buff_failed; u32 rx_int_delay; u32 rx_abs_int_delay; @@ -317,7 +315,6 @@ struct e1000_adapter { struct e1000_rx_ring test_rx_ring; int msg_enable; - bool have_msi; /* to not mess up cache alignment, always add to the bottom */ bool tso_force; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 27f996a2010..490b2b7cd3a 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -82,7 +82,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, - { "rx_header_split", E1000_STAT(rx_hdr_split) }, { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, { "tx_smbus", E1000_STAT(stats.mgptc) }, { "rx_smbus", E1000_STAT(stats.mgprc) }, @@ -114,8 +113,6 @@ static int e1000_get_settings(struct net_device *netdev, SUPPORTED_1000baseT_Full| SUPPORTED_Autoneg | SUPPORTED_TP); - if (hw->phy_type == e1000_phy_ife) - ecmd->supported &= ~SUPPORTED_1000baseT_Full; ecmd->advertising = ADVERTISED_TP; if (hw->autoneg == 1) { @@ -178,14 +175,6 @@ static int e1000_set_settings(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - /* When SoL/IDER sessions are active, autoneg/speed/duplex - * cannot be changed */ - if (e1000_check_phy_reset_block(hw)) { - DPRINTK(DRV, ERR, "Cannot change link characteristics " - "when SoL/IDER is active.\n"); - return -EINVAL; - } - while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) msleep(1); @@ -330,10 +319,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data) else netdev->features &= ~NETIF_F_TSO; - if (data && (adapter->hw.mac_type > e1000_82547_rev_2)) - netdev->features |= NETIF_F_TSO6; - else - netdev->features &= ~NETIF_F_TSO6; + netdev->features &= ~NETIF_F_TSO6; DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->tso_force = true; @@ -441,7 +427,6 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ if (hw->mac_type >= e1000_82540 && - hw->mac_type < e1000_82571 && hw->media_type == e1000_media_type_copper) { regs_buff[26] = er32(MANC); } @@ -554,10 +539,8 @@ static int e1000_set_eeprom(struct net_device *netdev, ret_val = e1000_write_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); - /* Update the checksum over the first part of the EEPROM if needed - * and flush shadow RAM for 82573 conrollers */ - if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || - (hw->mac_type == e1000_82573))) + /* Update the checksum over the first part of the EEPROM if needed */ + if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG)) e1000_update_eeprom_checksum(hw); kfree(eeprom_buff); @@ -568,31 +551,12 @@ static void e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; char firmware_version[32]; - u16 eeprom_data; strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - /* EEPROM image version # is reported as firmware version # for - * 8257{1|2|3} controllers */ - e1000_read_eeprom(hw, 5, 1, &eeprom_data); - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: - sprintf(firmware_version, "%d.%d-%d", - (eeprom_data & 0xF000) >> 12, - (eeprom_data & 0x0FF0) >> 4, - eeprom_data & 0x000F); - break; - default: - sprintf(firmware_version, "N/A"); - } - + sprintf(firmware_version, "N/A"); strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->regdump_len = e1000_get_regs_len(netdev); @@ -781,21 +745,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - switch (hw->mac_type) { + /* there are several bits on newer hardware that are r/w */ - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - toggle = 0x7FFFF3FF; - break; - case e1000_82573: - case e1000_ich8lan: - toggle = 0x7FFFF033; - break; - default: - toggle = 0xFFFFF833; - break; - } + toggle = 0xFFFFF833; before = er32(STATUS); value = (er32(STATUS) & toggle); @@ -810,12 +762,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) /* restore previous status */ ew32(STATUS, before); - if (hw->mac_type != e1000_ich8lan) { - REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); - } + REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); @@ -830,8 +780,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); - before = (hw->mac_type == e1000_ich8lan ? - 0x06C3B33E : 0x06DFB3FE); + before = 0x06DFB3FE; REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); @@ -839,12 +788,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); - if (hw->mac_type != e1000_ich8lan) - REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); - value = (hw->mac_type == e1000_ich8lan ? - E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + value = E1000_RAR_ENTRIES; for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, 0xFFFFFFFF); @@ -859,8 +806,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) } - value = (hw->mac_type == e1000_ich8lan ? - E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE); + value = E1000_MC_TBL_SIZE; for (i = 0; i < value; i++) REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); @@ -933,9 +879,6 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Test each interrupt */ for (; i < 10; i++) { - if (hw->mac_type == e1000_ich8lan && i == 8) - continue; - /* Interrupt to test */ mask = 1 << i; @@ -1289,35 +1232,20 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1000_write_phy_reg(hw, PHY_CTRL, 0x9140); /* autoneg off */ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140); - } else if (hw->phy_type == e1000_phy_gg82563) - e1000_write_phy_reg(hw, - GG82563_PHY_KMRN_MODE_CTRL, - 0x1CC); + } ctrl_reg = er32(CTRL); - if (hw->phy_type == e1000_phy_ife) { - /* force 100, set loopback */ - e1000_write_phy_reg(hw, PHY_CTRL, 0x6100); + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); - /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_100 |/* Force Speed to 100 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ - } else { - /* force 1000, set loopback */ - e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); - - /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg = er32(CTRL); - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ - } + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = er32(CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ if (hw->media_type == e1000_media_type_copper && hw->phy_type == e1000_phy_m88) @@ -1373,14 +1301,8 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: return e1000_integrated_phy_loopback(adapter); break; - default: /* Default PHY loopback work is to read the MII * control register and assert bit 14 (loopback mode). @@ -1409,14 +1331,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); break; - case e1000_82571: - case e1000_82572: -#define E1000_SERDES_LB_ON 0x410 - e1000_set_phy_loopback(adapter); - ew32(SCTL, E1000_SERDES_LB_ON); - msleep(10); - return 0; - break; default: rctl = er32(RCTL); rctl |= E1000_RCTL_LBM_TCVR; @@ -1440,26 +1354,12 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) ew32(RCTL, rctl); switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - if (hw->media_type == e1000_media_type_fiber || - hw->media_type == e1000_media_type_internal_serdes) { -#define E1000_SERDES_LB_OFF 0x400 - ew32(SCTL, E1000_SERDES_LB_OFF); - msleep(10); - break; - } - /* Fall Through */ case e1000_82545: case e1000_82546: case e1000_82545_rev_3: case e1000_82546_rev_3: default: hw->autoneg = true; - if (hw->phy_type == e1000_phy_gg82563) - e1000_write_phy_reg(hw, - GG82563_PHY_KMRN_MODE_CTRL, - 0x180); e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; @@ -1560,17 +1460,6 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) { - struct e1000_hw *hw = &adapter->hw; - - /* PHY loopback cannot be performed if SoL/IDER - * sessions are active */ - if (e1000_check_phy_reset_block(hw)) { - DPRINTK(DRV, ERR, "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); - *data = 0; - goto out; - } - *data = e1000_setup_desc_rings(adapter); if (*data) goto out; @@ -1592,13 +1481,13 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) *data = 0; if (hw->media_type == e1000_media_type_internal_serdes) { int i = 0; - hw->serdes_link_down = true; + hw->serdes_has_link = false; /* On some blade server designs, link establishment * could take as long as 2-3 minutes */ do { e1000_check_for_link(hw); - if (!hw->serdes_link_down) + if (hw->serdes_has_link) return *data; msleep(20); } while (i++ < 3750); @@ -1716,15 +1605,11 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, case E1000_DEV_ID_82545EM_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER: case E1000_DEV_ID_82546GB_PCIE: - case E1000_DEV_ID_82571EB_SERDES_QUAD: /* these don't support WoL at all */ wol->supported = 0; break; case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: - case E1000_DEV_ID_82571EB_FIBER: - case E1000_DEV_ID_82571EB_SERDES: - case E1000_DEV_ID_82571EB_COPPER: /* Wake events not supported on port B */ if (er32(STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; @@ -1733,10 +1618,6 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, /* return success for non excluded adapter ports */ retval = 0; break; - case E1000_DEV_ID_82571EB_QUAD_COPPER: - case E1000_DEV_ID_82571EB_QUAD_FIBER: - case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: - case E1000_DEV_ID_82571PT_QUAD_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { @@ -1872,30 +1753,15 @@ static int e1000_phys_id(struct net_device *netdev, u32 data) if (!data) data = INT_MAX; - if (hw->mac_type < e1000_82571) { - if (!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = e1000_led_blink_callback; - adapter->blink_timer.data = (unsigned long)adapter; - } - e1000_setup_led(hw); - mod_timer(&adapter->blink_timer, jiffies); - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); - } else if (hw->phy_type == e1000_phy_ife) { - if (!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = e1000_led_blink_callback; - adapter->blink_timer.data = (unsigned long)adapter; - } - mod_timer(&adapter->blink_timer, jiffies); - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); - e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0); - } else { - e1000_blink_led_start(hw); - msleep_interruptible(data * 1000); + if (!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long)adapter; } + e1000_setup_led(hw); + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); e1000_led_off(hw); clear_bit(E1000_LED_ON, &adapter->led_status); diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 45ac225a7aa..8d7d87f1282 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -24,88 +24,34 @@ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 -*******************************************************************************/ + */ /* e1000_hw.c * Shared functions for accessing and configuring the MAC */ - #include "e1000_hw.h" -static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask); -static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask); -static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data); -static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data); -static s32 e1000_get_software_semaphore(struct e1000_hw *hw); -static void e1000_release_software_semaphore(struct e1000_hw *hw); - -static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw); static s32 e1000_check_downshift(struct e1000_hw *hw); static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); static void e1000_clear_hw_cntrs(struct e1000_hw *hw); static void e1000_clear_vfta(struct e1000_hw *hw); -static s32 e1000_commit_shadow_ram(struct e1000_hw *hw); static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up); static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw); static s32 e1000_detect_gig_phy(struct e1000_hw *hw); -static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank); static s32 e1000_get_auto_rd_done(struct e1000_hw *hw); static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length); -static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); -static s32 e1000_get_software_flag(struct e1000_hw *hw); -static s32 e1000_ich8_cycle_init(struct e1000_hw *hw); -static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout); static s32 e1000_id_led_init(struct e1000_hw *hw); -static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, - u32 cnf_base_addr, - u32 cnf_size); -static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw); static void e1000_init_rx_addrs(struct e1000_hw *hw); -static void e1000_initialize_hardware_bits(struct e1000_hw *hw); -static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); -static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -static s32 e1000_mng_enable_host_if(struct e1000_hw *hw); -static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum); -static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, - struct e1000_host_mng_command_header - *hdr); -static s32 e1000_mng_write_commit(struct e1000_hw *hw); -static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info); static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); -static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data); -static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, - u8 byte); -static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte); -static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data); -static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 *data); -static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 data); -static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static void e1000_release_software_flag(struct e1000_hw *hw); static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); -static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop); -static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); static s32 e1000_wait_autoneg(struct e1000_hw *hw); static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value); static s32 e1000_set_phy_type(struct e1000_hw *hw); @@ -117,12 +63,11 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); static s32 e1000_config_mac_to_phy(struct e1000_hw *hw); static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl); static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl); -static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, - u16 count); +static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count); static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw); static s32 e1000_phy_reset_dsp(struct e1000_hw *hw); static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, - u16 words, u16 *data); + u16 words, u16 *data); static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw); @@ -131,7 +76,7 @@ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd); static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count); static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 phy_data); -static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr, +static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data); static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count); static s32 e1000_acquire_eeprom(struct e1000_hw *hw); @@ -140,188 +85,164 @@ static void e1000_standby_eeprom(struct e1000_hw *hw); static s32 e1000_set_vco_speed(struct e1000_hw *hw); static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw); static s32 e1000_set_phy_mode(struct e1000_hw *hw); -static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer); -static u8 e1000_calculate_mng_checksum(char *buffer, u32 length); -static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex); -static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw); -static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); /* IGP cable length table */ static const -u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = - { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, - 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40, - 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60, - 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90, - 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, - 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, - 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; - -static const -u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = - { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, - 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, - 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, - 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, - 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, - 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, - 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, - 104, 109, 114, 118, 121, 124}; +u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = { + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, + 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40, + 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60, + 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90, + 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, + 100, + 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, + 110, 110, + 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, + 120, 120 +}; static DEFINE_SPINLOCK(e1000_eeprom_lock); -/****************************************************************************** - * Set the phy type member in the hw struct. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_set_phy_type - Set the phy type member in the hw struct. + * @hw: Struct containing variables accessed by shared code + */ static s32 e1000_set_phy_type(struct e1000_hw *hw) { - DEBUGFUNC("e1000_set_phy_type"); - - if (hw->mac_type == e1000_undefined) - return -E1000_ERR_PHY_TYPE; - - switch (hw->phy_id) { - case M88E1000_E_PHY_ID: - case M88E1000_I_PHY_ID: - case M88E1011_I_PHY_ID: - case M88E1111_I_PHY_ID: - hw->phy_type = e1000_phy_m88; - break; - case IGP01E1000_I_PHY_ID: - if (hw->mac_type == e1000_82541 || - hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82547_rev_2) { - hw->phy_type = e1000_phy_igp; - break; - } - case IGP03E1000_E_PHY_ID: - hw->phy_type = e1000_phy_igp_3; - break; - case IFE_E_PHY_ID: - case IFE_PLUS_E_PHY_ID: - case IFE_C_E_PHY_ID: - hw->phy_type = e1000_phy_ife; - break; - case GG82563_E_PHY_ID: - if (hw->mac_type == e1000_80003es2lan) { - hw->phy_type = e1000_phy_gg82563; - break; - } - /* Fall Through */ - default: - /* Should never have loaded on this device */ - hw->phy_type = e1000_phy_undefined; - return -E1000_ERR_PHY_TYPE; - } - - return E1000_SUCCESS; -} - -/****************************************************************************** - * IGP phy init script - initializes the GbE PHY - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void e1000_phy_init_script(struct e1000_hw *hw) -{ - u32 ret_val; - u16 phy_saved_data; - - DEBUGFUNC("e1000_phy_init_script"); - - if (hw->phy_init_script) { - msleep(20); - - /* Save off the current value of register 0x2F5B to be restored at - * the end of this routine. */ - ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - - /* Disabled the PHY transmitter */ - e1000_write_phy_reg(hw, 0x2F5B, 0x0003); + DEBUGFUNC("e1000_set_phy_type"); - msleep(20); + if (hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; - e1000_write_phy_reg(hw,0x0000,0x0140); - - msleep(5); - - switch (hw->mac_type) { - case e1000_82541: - case e1000_82547: - e1000_write_phy_reg(hw, 0x1F95, 0x0001); - - e1000_write_phy_reg(hw, 0x1F71, 0xBD21); - - e1000_write_phy_reg(hw, 0x1F79, 0x0018); - - e1000_write_phy_reg(hw, 0x1F30, 0x1600); - - e1000_write_phy_reg(hw, 0x1F31, 0x0014); - - e1000_write_phy_reg(hw, 0x1F32, 0x161C); - - e1000_write_phy_reg(hw, 0x1F94, 0x0003); - - e1000_write_phy_reg(hw, 0x1F96, 0x003F); - - e1000_write_phy_reg(hw, 0x2010, 0x0008); - break; - - case e1000_82541_rev_2: - case e1000_82547_rev_2: - e1000_write_phy_reg(hw, 0x1F73, 0x0099); - break; - default: - break; - } - - e1000_write_phy_reg(hw, 0x0000, 0x3300); - - msleep(20); - - /* Now enable the transmitter */ - e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - - if (hw->mac_type == e1000_82547) { - u16 fused, fine, coarse; - - /* Move to analog registers page */ - e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused); - - if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { - e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused); + switch (hw->phy_id) { + case M88E1000_E_PHY_ID: + case M88E1000_I_PHY_ID: + case M88E1011_I_PHY_ID: + case M88E1111_I_PHY_ID: + hw->phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: + if (hw->mac_type == e1000_82541 || + hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547 || + hw->mac_type == e1000_82547_rev_2) { + hw->phy_type = e1000_phy_igp; + break; + } + default: + /* Should never have loaded on this device */ + hw->phy_type = e1000_phy_undefined; + return -E1000_ERR_PHY_TYPE; + } - fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK; - coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK; + return E1000_SUCCESS; +} - if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) { - coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10; - fine -= IGP01E1000_ANALOG_FUSE_FINE_1; - } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH) - fine -= IGP01E1000_ANALOG_FUSE_FINE_10; +/** + * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY + * @hw: Struct containing variables accessed by shared code + */ +static void e1000_phy_init_script(struct e1000_hw *hw) +{ + u32 ret_val; + u16 phy_saved_data; + + DEBUGFUNC("e1000_phy_init_script"); + + if (hw->phy_init_script) { + msleep(20); + + /* Save off the current value of register 0x2F5B to be restored at + * the end of this routine. */ + ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); + + /* Disabled the PHY transmitter */ + e1000_write_phy_reg(hw, 0x2F5B, 0x0003); + msleep(20); + + e1000_write_phy_reg(hw, 0x0000, 0x0140); + msleep(5); + + switch (hw->mac_type) { + case e1000_82541: + case e1000_82547: + e1000_write_phy_reg(hw, 0x1F95, 0x0001); + e1000_write_phy_reg(hw, 0x1F71, 0xBD21); + e1000_write_phy_reg(hw, 0x1F79, 0x0018); + e1000_write_phy_reg(hw, 0x1F30, 0x1600); + e1000_write_phy_reg(hw, 0x1F31, 0x0014); + e1000_write_phy_reg(hw, 0x1F32, 0x161C); + e1000_write_phy_reg(hw, 0x1F94, 0x0003); + e1000_write_phy_reg(hw, 0x1F96, 0x003F); + e1000_write_phy_reg(hw, 0x2010, 0x0008); + break; - fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) | - (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) | - (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK); + case e1000_82541_rev_2: + case e1000_82547_rev_2: + e1000_write_phy_reg(hw, 0x1F73, 0x0099); + break; + default: + break; + } - e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused); - e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS, - IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL); - } - } - } + e1000_write_phy_reg(hw, 0x0000, 0x3300); + msleep(20); + + /* Now enable the transmitter */ + e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); + + if (hw->mac_type == e1000_82547) { + u16 fused, fine, coarse; + + /* Move to analog registers page */ + e1000_read_phy_reg(hw, + IGP01E1000_ANALOG_SPARE_FUSE_STATUS, + &fused); + + if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { + e1000_read_phy_reg(hw, + IGP01E1000_ANALOG_FUSE_STATUS, + &fused); + + fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK; + coarse = + fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK; + + if (coarse > + IGP01E1000_ANALOG_FUSE_COARSE_THRESH) { + coarse -= + IGP01E1000_ANALOG_FUSE_COARSE_10; + fine -= IGP01E1000_ANALOG_FUSE_FINE_1; + } else if (coarse == + IGP01E1000_ANALOG_FUSE_COARSE_THRESH) + fine -= IGP01E1000_ANALOG_FUSE_FINE_10; + + fused = + (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) | + (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) | + (coarse & + IGP01E1000_ANALOG_FUSE_COARSE_MASK); + + e1000_write_phy_reg(hw, + IGP01E1000_ANALOG_FUSE_CONTROL, + fused); + e1000_write_phy_reg(hw, + IGP01E1000_ANALOG_FUSE_BYPASS, + IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL); + } + } + } } -/****************************************************************************** - * Set the mac type member in the hw struct. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_set_mac_type - Set the mac type member in the hw struct. + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_set_mac_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_mac_type"); @@ -397,61 +318,12 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; - case E1000_DEV_ID_82571EB_COPPER: - case E1000_DEV_ID_82571EB_FIBER: - case E1000_DEV_ID_82571EB_SERDES: - case E1000_DEV_ID_82571EB_SERDES_DUAL: - case E1000_DEV_ID_82571EB_SERDES_QUAD: - case E1000_DEV_ID_82571EB_QUAD_COPPER: - case E1000_DEV_ID_82571PT_QUAD_COPPER: - case E1000_DEV_ID_82571EB_QUAD_FIBER: - case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: - hw->mac_type = e1000_82571; - break; - case E1000_DEV_ID_82572EI_COPPER: - case E1000_DEV_ID_82572EI_FIBER: - case E1000_DEV_ID_82572EI_SERDES: - case E1000_DEV_ID_82572EI: - hw->mac_type = e1000_82572; - break; - case E1000_DEV_ID_82573E: - case E1000_DEV_ID_82573E_IAMT: - case E1000_DEV_ID_82573L: - hw->mac_type = e1000_82573; - break; - case E1000_DEV_ID_80003ES2LAN_COPPER_SPT: - case E1000_DEV_ID_80003ES2LAN_SERDES_SPT: - case E1000_DEV_ID_80003ES2LAN_COPPER_DPT: - case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: - hw->mac_type = e1000_80003es2lan; - break; - case E1000_DEV_ID_ICH8_IGP_M_AMT: - case E1000_DEV_ID_ICH8_IGP_AMT: - case E1000_DEV_ID_ICH8_IGP_C: - case E1000_DEV_ID_ICH8_IFE: - case E1000_DEV_ID_ICH8_IFE_GT: - case E1000_DEV_ID_ICH8_IFE_G: - case E1000_DEV_ID_ICH8_IGP_M: - hw->mac_type = e1000_ich8lan; - break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; } switch (hw->mac_type) { - case e1000_ich8lan: - hw->swfwhw_semaphore_present = true; - hw->asf_firmware_present = true; - break; - case e1000_80003es2lan: - hw->swfw_sync_present = true; - /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_82573: - hw->eeprom_semaphore_present = true; - /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: @@ -468,6058 +340,4500 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) if (hw->mac_type == e1000_82543) hw->bad_tx_carr_stats_fd = true; - /* capable of receiving management packets to the host */ - if (hw->mac_type >= e1000_82571) - hw->has_manc2h = true; - - /* In rare occasions, ESB2 systems would end up started without - * the RX unit being turned on. - */ - if (hw->mac_type == e1000_80003es2lan) - hw->rx_needs_kicking = true; - if (hw->mac_type > e1000_82544) hw->has_smbus = true; return E1000_SUCCESS; } -/***************************************************************************** - * Set media type and TBI compatibility. - * - * hw - Struct containing variables accessed by shared code - * **************************************************************************/ +/** + * e1000_set_media_type - Set media type and TBI compatibility. + * @hw: Struct containing variables accessed by shared code + */ void e1000_set_media_type(struct e1000_hw *hw) { - u32 status; - - DEBUGFUNC("e1000_set_media_type"); - - if (hw->mac_type != e1000_82543) { - /* tbi_compatibility is only valid on 82543 */ - hw->tbi_compatibility_en = false; - } - - switch (hw->device_id) { - case E1000_DEV_ID_82545GM_SERDES: - case E1000_DEV_ID_82546GB_SERDES: - case E1000_DEV_ID_82571EB_SERDES: - case E1000_DEV_ID_82571EB_SERDES_DUAL: - case E1000_DEV_ID_82571EB_SERDES_QUAD: - case E1000_DEV_ID_82572EI_SERDES: - case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: - hw->media_type = e1000_media_type_internal_serdes; - break; - default: - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - hw->media_type = e1000_media_type_fiber; - break; - case e1000_ich8lan: - case e1000_82573: - /* The STATUS_TBIMODE bit is reserved or reused for the this - * device. - */ - hw->media_type = e1000_media_type_copper; - break; - default: - status = er32(STATUS); - if (status & E1000_STATUS_TBIMODE) { - hw->media_type = e1000_media_type_fiber; - /* tbi_compatibility not valid on fiber */ - hw->tbi_compatibility_en = false; - } else { - hw->media_type = e1000_media_type_copper; - } - break; - } - } + u32 status; + + DEBUGFUNC("e1000_set_media_type"); + + if (hw->mac_type != e1000_82543) { + /* tbi_compatibility is only valid on 82543 */ + hw->tbi_compatibility_en = false; + } + + switch (hw->device_id) { + case E1000_DEV_ID_82545GM_SERDES: + case E1000_DEV_ID_82546GB_SERDES: + hw->media_type = e1000_media_type_internal_serdes; + break; + default: + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + hw->media_type = e1000_media_type_fiber; + break; + default: + status = er32(STATUS); + if (status & E1000_STATUS_TBIMODE) { + hw->media_type = e1000_media_type_fiber; + /* tbi_compatibility not valid on fiber */ + hw->tbi_compatibility_en = false; + } else { + hw->media_type = e1000_media_type_copper; + } + break; + } + } } -/****************************************************************************** - * Reset the transmit and receive units; mask and clear all interrupts. +/** + * e1000_reset_hw: reset the hardware completely + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Reset the transmit and receive units; mask and clear all interrupts. + */ s32 e1000_reset_hw(struct e1000_hw *hw) { - u32 ctrl; - u32 ctrl_ext; - u32 icr; - u32 manc; - u32 led_ctrl; - u32 timeout; - u32 extcnf_ctrl; - s32 ret_val; - - DEBUGFUNC("e1000_reset_hw"); - - /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ - if (hw->mac_type == e1000_82542_rev2_0) { - DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); - e1000_pci_clear_mwi(hw); - } - - if (hw->bus_type == e1000_bus_type_pci_express) { - /* Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) { - DEBUGOUT("PCI-E Master disable polling has failed.\n"); - } - } - - /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); - ew32(IMC, 0xffffffff); - - /* Disable the Transmit and Receive units. Then delay to allow - * any pending transactions to complete before we hit the MAC with - * the global reset. - */ - ew32(RCTL, 0); - ew32(TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(); - - /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ - hw->tbi_compatibility_on = false; - - /* Delay to allow any outstanding PCI transactions to complete before - * resetting the device - */ - msleep(10); - - ctrl = er32(CTRL); - - /* Must reset the PHY before resetting the MAC */ - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); - msleep(5); - } - - /* Must acquire the MDIO ownership before MAC reset. - * Ownership defaults to firmware after a reset. */ - if (hw->mac_type == e1000_82573) { - timeout = 10; - - extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - - do { - ew32(EXTCNF_CTRL, extcnf_ctrl); - extcnf_ctrl = er32(EXTCNF_CTRL); - - if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) - break; - else - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - - msleep(2); - timeout--; - } while (timeout); - } - - /* Workaround for ICH8 bit corruption issue in FIFO memory */ - if (hw->mac_type == e1000_ich8lan) { - /* Set Tx and Rx buffer allocation to 8k apiece. */ - ew32(PBA, E1000_PBA_8K); - /* Set Packet Buffer Size to 16k. */ - ew32(PBS, E1000_PBS_16K); - } - - /* Issue a global reset to the MAC. This will reset the chip's - * transmit, receive, DMA, and link units. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - DEBUGOUT("Issuing a global reset to MAC\n"); - - switch (hw->mac_type) { - case e1000_82544: - case e1000_82540: - case e1000_82545: - case e1000_82546: - case e1000_82541: - case e1000_82541_rev_2: - /* These controllers can't ack the 64-bit write when issuing the - * reset, so use IO-mapping as a workaround to issue the reset */ - E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); - break; - case e1000_82545_rev_3: - case e1000_82546_rev_3: - /* Reset is performed on a shadow of the control register */ - ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); - break; - case e1000_ich8lan: - if (!hw->phy_reset_disable && - e1000_check_phy_reset_block(hw) == E1000_SUCCESS) { - /* e1000_ich8lan PHY HW reset requires MAC CORE reset - * at the same time to make sure the interface between - * MAC and the external PHY is reset. - */ - ctrl |= E1000_CTRL_PHY_RST; - } - - e1000_get_software_flag(hw); - ew32(CTRL, (ctrl | E1000_CTRL_RST)); - msleep(5); - break; - default: - ew32(CTRL, (ctrl | E1000_CTRL_RST)); - break; - } - - /* After MAC reset, force reload of EEPROM to restore power-on settings to - * device. Later controllers reload the EEPROM automatically, so just wait - * for reload to complete. - */ - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - /* Wait for reset to complete */ - udelay(10); - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - /* Wait for EEPROM reload */ - msleep(2); - break; - case e1000_82541: - case e1000_82541_rev_2: - case e1000_82547: - case e1000_82547_rev_2: - /* Wait for EEPROM reload */ - msleep(20); - break; - case e1000_82573: - if (!e1000_is_onboard_nvm_eeprom(hw)) { - udelay(10); - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - } - /* fall through */ - default: - /* Auto read done will delay 5ms or poll based on mac type */ - ret_val = e1000_get_auto_rd_done(hw); - if (ret_val) - return ret_val; - break; - } - - /* Disable HW ARPs on ASF enabled adapters */ - if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { - manc = er32(MANC); - manc &= ~(E1000_MANC_ARP_EN); - ew32(MANC, manc); - } - - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - e1000_phy_init_script(hw); - - /* Configure activity LED after PHY reset */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); - } - - /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); - ew32(IMC, 0xffffffff); - - /* Clear any pending interrupt events. */ - icr = er32(ICR); - - /* If MWI was previously enabled, reenable it. */ - if (hw->mac_type == e1000_82542_rev2_0) { - if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) - e1000_pci_set_mwi(hw); - } - - if (hw->mac_type == e1000_ich8lan) { - u32 kab = er32(KABGTXD); - kab |= E1000_KABGTXD_BGSQLBIAS; - ew32(KABGTXD, kab); - } - - return E1000_SUCCESS; -} + u32 ctrl; + u32 ctrl_ext; + u32 icr; + u32 manc; + u32 led_ctrl; + s32 ret_val; -/****************************************************************************** - * - * Initialize a number of hardware-dependent bits - * - * hw: Struct containing variables accessed by shared code - * - * This function contains hardware limitation workarounds for PCI-E adapters - * - *****************************************************************************/ -static void e1000_initialize_hardware_bits(struct e1000_hw *hw) -{ - if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { - /* Settings common to all PCI-express silicon */ - u32 reg_ctrl, reg_ctrl_ext; - u32 reg_tarc0, reg_tarc1; - u32 reg_tctl; - u32 reg_txdctl, reg_txdctl1; - - /* link autonegotiation/sync workarounds */ - reg_tarc0 = er32(TARC0); - reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); - - /* Enable not-done TX descriptor counting */ - reg_txdctl = er32(TXDCTL); - reg_txdctl |= E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL, reg_txdctl); - reg_txdctl1 = er32(TXDCTL1); - reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL1, reg_txdctl1); - - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - /* Clear PHY TX compatible mode bits */ - reg_tarc1 = er32(TARC1); - reg_tarc1 &= ~((1 << 30)|(1 << 29)); - - /* link autonegotiation/sync workarounds */ - reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23)); - - /* TX ring control fixes */ - reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); - - /* Multiple read bit is reversed polarity */ - reg_tctl = er32(TCTL); - if (reg_tctl & E1000_TCTL_MULR) - reg_tarc1 &= ~(1 << 28); - else - reg_tarc1 |= (1 << 28); - - ew32(TARC1, reg_tarc1); - break; - case e1000_82573: - reg_ctrl_ext = er32(CTRL_EXT); - reg_ctrl_ext &= ~(1 << 23); - reg_ctrl_ext |= (1 << 22); - - /* TX byte count fix */ - reg_ctrl = er32(CTRL); - reg_ctrl &= ~(1 << 29); - - ew32(CTRL_EXT, reg_ctrl_ext); - ew32(CTRL, reg_ctrl); - break; - case e1000_80003es2lan: - /* improve small packet performace for fiber/serdes */ - if ((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) { - reg_tarc0 &= ~(1 << 20); - } - - /* Multiple read bit is reversed polarity */ - reg_tctl = er32(TCTL); - reg_tarc1 = er32(TARC1); - if (reg_tctl & E1000_TCTL_MULR) - reg_tarc1 &= ~(1 << 28); - else - reg_tarc1 |= (1 << 28); - - ew32(TARC1, reg_tarc1); - break; - case e1000_ich8lan: - /* Reduce concurrent DMA requests to 3 from 4 */ - if ((hw->revision_id < 3) || - ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && - (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) - reg_tarc0 |= ((1 << 29)|(1 << 28)); - - reg_ctrl_ext = er32(CTRL_EXT); - reg_ctrl_ext |= (1 << 22); - ew32(CTRL_EXT, reg_ctrl_ext); - - /* workaround TX hang with TSO=on */ - reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); - - /* Multiple read bit is reversed polarity */ - reg_tctl = er32(TCTL); - reg_tarc1 = er32(TARC1); - if (reg_tctl & E1000_TCTL_MULR) - reg_tarc1 &= ~(1 << 28); - else - reg_tarc1 |= (1 << 28); - - /* workaround TX hang with TSO=on */ - reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); - - ew32(TARC1, reg_tarc1); - break; - default: - break; - } - - ew32(TARC0, reg_tarc0); - } + DEBUGFUNC("e1000_reset_hw"); + + /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ + if (hw->mac_type == e1000_82542_rev2_0) { + DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); + e1000_pci_clear_mwi(hw); + } + + /* Clear interrupt mask to stop board from generating interrupts */ + DEBUGOUT("Masking off all interrupts\n"); + ew32(IMC, 0xffffffff); + + /* Disable the Transmit and Receive units. Then delay to allow + * any pending transactions to complete before we hit the MAC with + * the global reset. + */ + ew32(RCTL, 0); + ew32(TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(); + + /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ + hw->tbi_compatibility_on = false; + + /* Delay to allow any outstanding PCI transactions to complete before + * resetting the device + */ + msleep(10); + + ctrl = er32(CTRL); + + /* Must reset the PHY before resetting the MAC */ + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); + msleep(5); + } + + /* Issue a global reset to the MAC. This will reset the chip's + * transmit, receive, DMA, and link units. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + DEBUGOUT("Issuing a global reset to MAC\n"); + + switch (hw->mac_type) { + case e1000_82544: + case e1000_82540: + case e1000_82545: + case e1000_82546: + case e1000_82541: + case e1000_82541_rev_2: + /* These controllers can't ack the 64-bit write when issuing the + * reset, so use IO-mapping as a workaround to issue the reset */ + E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); + break; + case e1000_82545_rev_3: + case e1000_82546_rev_3: + /* Reset is performed on a shadow of the control register */ + ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); + break; + default: + ew32(CTRL, (ctrl | E1000_CTRL_RST)); + break; + } + + /* After MAC reset, force reload of EEPROM to restore power-on settings to + * device. Later controllers reload the EEPROM automatically, so just wait + * for reload to complete. + */ + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + /* Wait for reset to complete */ + udelay(10); + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); + /* Wait for EEPROM reload */ + msleep(2); + break; + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + /* Wait for EEPROM reload */ + msleep(20); + break; + default: + /* Auto read done will delay 5ms or poll based on mac type */ + ret_val = e1000_get_auto_rd_done(hw); + if (ret_val) + return ret_val; + break; + } + + /* Disable HW ARPs on ASF enabled adapters */ + if (hw->mac_type >= e1000_82540) { + manc = er32(MANC); + manc &= ~(E1000_MANC_ARP_EN); + ew32(MANC, manc); + } + + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + e1000_phy_init_script(hw); + + /* Configure activity LED after PHY reset */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + } + + /* Clear interrupt mask to stop board from generating interrupts */ + DEBUGOUT("Masking off all interrupts\n"); + ew32(IMC, 0xffffffff); + + /* Clear any pending interrupt events. */ + icr = er32(ICR); + + /* If MWI was previously enabled, reenable it. */ + if (hw->mac_type == e1000_82542_rev2_0) { + if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) + e1000_pci_set_mwi(hw); + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Performs basic configuration of the adapter. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_init_hw: Performs basic configuration of the adapter. + * @hw: Struct containing variables accessed by shared code * * Assumes that the controller has previously been reset and is in a * post-reset uninitialized state. Initializes the receive address registers, * multicast table, and VLAN filter table. Calls routines to setup link * configuration and flow control settings. Clears all on-chip counters. Leaves * the transmit and receive units disabled and uninitialized. - *****************************************************************************/ + */ s32 e1000_init_hw(struct e1000_hw *hw) { - u32 ctrl; - u32 i; - s32 ret_val; - u32 mta_size; - u32 reg_data; - u32 ctrl_ext; - - DEBUGFUNC("e1000_init_hw"); - - /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */ - if ((hw->mac_type == e1000_ich8lan) && - ((hw->revision_id < 3) || - ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && - (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { - reg_data = er32(STATUS); - reg_data &= ~0x80000000; - ew32(STATUS, reg_data); - } - - /* Initialize Identification LED */ - ret_val = e1000_id_led_init(hw); - if (ret_val) { - DEBUGOUT("Error Initializing Identification LED\n"); - return ret_val; - } - - /* Set the media type and TBI compatibility */ - e1000_set_media_type(hw); - - /* Must be called after e1000_set_media_type because media_type is used */ - e1000_initialize_hardware_bits(hw); - - /* Disabling VLAN filtering. */ - DEBUGOUT("Initializing the IEEE VLAN\n"); - /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ - if (hw->mac_type != e1000_ich8lan) { - if (hw->mac_type < e1000_82545_rev_3) - ew32(VET, 0); - e1000_clear_vfta(hw); - } - - /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ - if (hw->mac_type == e1000_82542_rev2_0) { - DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); - e1000_pci_clear_mwi(hw); - ew32(RCTL, E1000_RCTL_RST); - E1000_WRITE_FLUSH(); - msleep(5); - } - - /* Setup the receive address. This involves initializing all of the Receive - * Address Registers (RARs 0 - 15). - */ - e1000_init_rx_addrs(hw); - - /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ - if (hw->mac_type == e1000_82542_rev2_0) { - ew32(RCTL, 0); - E1000_WRITE_FLUSH(); - msleep(1); - if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) - e1000_pci_set_mwi(hw); - } - - /* Zero out the Multicast HASH table */ - DEBUGOUT("Zeroing the MTA\n"); - mta_size = E1000_MC_TBL_SIZE; - if (hw->mac_type == e1000_ich8lan) - mta_size = E1000_MC_TBL_SIZE_ICH8LAN; - for (i = 0; i < mta_size; i++) { - E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); - /* use write flush to prevent Memory Write Block (MWB) from - * occuring when accessing our register space */ - E1000_WRITE_FLUSH(); - } - - /* Set the PCI priority bit correctly in the CTRL register. This - * determines if the adapter gives priority to receives, or if it - * gives equal priority to transmits and receives. Valid only on - * 82542 and 82543 silicon. - */ - if (hw->dma_fairness && hw->mac_type <= e1000_82543) { - ctrl = er32(CTRL); - ew32(CTRL, ctrl | E1000_CTRL_PRIOR); - } - - switch (hw->mac_type) { - case e1000_82545_rev_3: - case e1000_82546_rev_3: - break; - default: - /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ - if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048) - e1000_pcix_set_mmrbc(hw, 2048); - break; - } - - /* More time needed for PHY to initialize */ - if (hw->mac_type == e1000_ich8lan) - msleep(15); - - /* Call a subroutine to configure the link and setup flow control. */ - ret_val = e1000_setup_link(hw); - - /* Set the transmit descriptor write-back policy */ - if (hw->mac_type > e1000_82544) { - ctrl = er32(TXDCTL); - ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - ew32(TXDCTL, ctrl); - } - - if (hw->mac_type == e1000_82573) { - e1000_enable_tx_pkt_filtering(hw); - } - - switch (hw->mac_type) { - default: - break; - case e1000_80003es2lan: - /* Enable retransmit on late collisions */ - reg_data = er32(TCTL); - reg_data |= E1000_TCTL_RTLC; - ew32(TCTL, reg_data); - - /* Configure Gigabit Carry Extend Padding */ - reg_data = er32(TCTL_EXT); - reg_data &= ~E1000_TCTL_EXT_GCEX_MASK; - reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX; - ew32(TCTL_EXT, reg_data); - - /* Configure Transmit Inter-Packet Gap */ - reg_data = er32(TIPG); - reg_data &= ~E1000_TIPG_IPGT_MASK; - reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - ew32(TIPG, reg_data); - - reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001); - reg_data &= ~0x00100000; - E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data); - /* Fall through */ - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: - ctrl = er32(TXDCTL1); - ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - ew32(TXDCTL1, ctrl); - break; - } - - - if (hw->mac_type == e1000_82573) { - u32 gcr = er32(GCR); - gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - ew32(GCR, gcr); - } - - /* Clear all of the statistics registers (clear on read). It is - * important that we do this after we have tried to establish link - * because the symbol error count will increment wildly if there - * is no link. - */ - e1000_clear_hw_cntrs(hw); - - /* ICH8 No-snoop bits are opposite polarity. - * Set to snoop by default after reset. */ - if (hw->mac_type == e1000_ich8lan) - e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL); - - if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || - hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { - ctrl_ext = er32(CTRL_EXT); - /* Relaxed ordering must be disabled to avoid a parity - * error crash in a PCI slot. */ - ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - ew32(CTRL_EXT, ctrl_ext); - } - - return ret_val; + u32 ctrl; + u32 i; + s32 ret_val; + u32 mta_size; + u32 ctrl_ext; + + DEBUGFUNC("e1000_init_hw"); + + /* Initialize Identification LED */ + ret_val = e1000_id_led_init(hw); + if (ret_val) { + DEBUGOUT("Error Initializing Identification LED\n"); + return ret_val; + } + + /* Set the media type and TBI compatibility */ + e1000_set_media_type(hw); + + /* Disabling VLAN filtering. */ + DEBUGOUT("Initializing the IEEE VLAN\n"); + if (hw->mac_type < e1000_82545_rev_3) + ew32(VET, 0); + e1000_clear_vfta(hw); + + /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ + if (hw->mac_type == e1000_82542_rev2_0) { + DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); + e1000_pci_clear_mwi(hw); + ew32(RCTL, E1000_RCTL_RST); + E1000_WRITE_FLUSH(); + msleep(5); + } + + /* Setup the receive address. This involves initializing all of the Receive + * Address Registers (RARs 0 - 15). + */ + e1000_init_rx_addrs(hw); + + /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ + if (hw->mac_type == e1000_82542_rev2_0) { + ew32(RCTL, 0); + E1000_WRITE_FLUSH(); + msleep(1); + if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) + e1000_pci_set_mwi(hw); + } + + /* Zero out the Multicast HASH table */ + DEBUGOUT("Zeroing the MTA\n"); + mta_size = E1000_MC_TBL_SIZE; + for (i = 0; i < mta_size; i++) { + E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); + /* use write flush to prevent Memory Write Block (MWB) from + * occurring when accessing our register space */ + E1000_WRITE_FLUSH(); + } + + /* Set the PCI priority bit correctly in the CTRL register. This + * determines if the adapter gives priority to receives, or if it + * gives equal priority to transmits and receives. Valid only on + * 82542 and 82543 silicon. + */ + if (hw->dma_fairness && hw->mac_type <= e1000_82543) { + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PRIOR); + } + + switch (hw->mac_type) { + case e1000_82545_rev_3: + case e1000_82546_rev_3: + break; + default: + /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ + if (hw->bus_type == e1000_bus_type_pcix + && e1000_pcix_get_mmrbc(hw) > 2048) + e1000_pcix_set_mmrbc(hw, 2048); + break; + } + + /* Call a subroutine to configure the link and setup flow control. */ + ret_val = e1000_setup_link(hw); + + /* Set the transmit descriptor write-back policy */ + if (hw->mac_type > e1000_82544) { + ctrl = er32(TXDCTL); + ctrl = + (ctrl & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB; + ew32(TXDCTL, ctrl); + } + + /* Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs(hw); + + if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || + hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { + ctrl_ext = er32(CTRL_EXT); + /* Relaxed ordering must be disabled to avoid a parity + * error crash in a PCI slot. */ + ctrl_ext |= E1000_CTRL_EXT_RO_DIS; + ew32(CTRL_EXT, ctrl_ext); + } + + return ret_val; } -/****************************************************************************** - * Adjust SERDES output amplitude based on EEPROM setting. - * - * hw - Struct containing variables accessed by shared code. - *****************************************************************************/ +/** + * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting. + * @hw: Struct containing variables accessed by shared code. + */ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) { - u16 eeprom_data; - s32 ret_val; - - DEBUGFUNC("e1000_adjust_serdes_amplitude"); - - if (hw->media_type != e1000_media_type_internal_serdes) - return E1000_SUCCESS; - - switch (hw->mac_type) { - case e1000_82545_rev_3: - case e1000_82546_rev_3: - break; - default: - return E1000_SUCCESS; - } - - ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, &eeprom_data); - if (ret_val) { - return ret_val; - } - - if (eeprom_data != EEPROM_RESERVED_WORD) { - /* Adjust SERDES output amplitude only. */ - eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + u16 eeprom_data; + s32 ret_val; + + DEBUGFUNC("e1000_adjust_serdes_amplitude"); + + if (hw->media_type != e1000_media_type_internal_serdes) + return E1000_SUCCESS; + + switch (hw->mac_type) { + case e1000_82545_rev_3: + case e1000_82546_rev_3: + break; + default: + return E1000_SUCCESS; + } + + ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, + &eeprom_data); + if (ret_val) { + return ret_val; + } + + if (eeprom_data != EEPROM_RESERVED_WORD) { + /* Adjust SERDES output amplitude only. */ + eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Configures flow control and link settings. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_setup_link - Configures flow control and link settings. + * @hw: Struct containing variables accessed by shared code * - * Determines which flow control settings to use. Calls the apropriate media- + * Determines which flow control settings to use. Calls the appropriate media- * specific link configuration function. Configures the flow control settings. * Assuming the adapter has a valid link partner, a valid link should be * established. Assumes the hardware has previously been reset and the * transmitter and receiver are not enabled. - *****************************************************************************/ + */ s32 e1000_setup_link(struct e1000_hw *hw) { - u32 ctrl_ext; - s32 ret_val; - u16 eeprom_data; - - DEBUGFUNC("e1000_setup_link"); - - /* In the case of the phy reset being blocked, we already have a link. - * We do not have to set it up again. */ - if (e1000_check_phy_reset_block(hw)) - return E1000_SUCCESS; - - /* Read and store word 0x0F of the EEPROM. This word contains bits - * that determine the hardware's default PAUSE (flow control) mode, - * a bit that determines whether the HW defaults to enabling or - * disabling auto-negotiation, and the direction of the - * SW defined pins. If there is no SW over-ride of the flow - * control setting, then the variable hw->fc will - * be initialized based on a value in the EEPROM. - */ - if (hw->fc == E1000_FC_DEFAULT) { - switch (hw->mac_type) { - case e1000_ich8lan: - case e1000_82573: - hw->fc = E1000_FC_FULL; - break; - default: - ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, - 1, &eeprom_data); - if (ret_val) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = E1000_FC_NONE; - else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == - EEPROM_WORD0F_ASM_DIR) - hw->fc = E1000_FC_TX_PAUSE; - else - hw->fc = E1000_FC_FULL; - break; - } - } - - /* We want to save off the original Flow Control configuration just - * in case we get disconnected and then reconnected into a different - * hub or switch with different Flow Control capabilities. - */ - if (hw->mac_type == e1000_82542_rev2_0) - hw->fc &= (~E1000_FC_TX_PAUSE); - - if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) - hw->fc &= (~E1000_FC_RX_PAUSE); - - hw->original_fc = hw->fc; - - DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc); - - /* Take the 4 bits from EEPROM word 0x0F that determine the initial - * polarity value for the SW controlled pins, and setup the - * Extended Device Control reg with that info. - * This is needed because one of the SW controlled pins is used for - * signal detection. So this should be done before e1000_setup_pcs_link() - * or e1000_phy_setup() is called. - */ - if (hw->mac_type == e1000_82543) { - ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, - 1, &eeprom_data); - if (ret_val) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << - SWDPIO__EXT_SHIFT); - ew32(CTRL_EXT, ctrl_ext); - } - - /* Call the necessary subroutine to configure the link. */ - ret_val = (hw->media_type == e1000_media_type_copper) ? - e1000_setup_copper_link(hw) : - e1000_setup_fiber_serdes_link(hw); - - /* Initialize the flow control address, type, and PAUSE timer - * registers to their default values. This is done even if flow - * control is disabled, because it does not hurt anything to - * initialize these registers. - */ - DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); - - /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */ - if (hw->mac_type != e1000_ich8lan) { - ew32(FCT, FLOW_CONTROL_TYPE); - ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); - ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); - } - - ew32(FCTTV, hw->fc_pause_time); - - /* Set the flow control receive threshold registers. Normally, - * these registers will be set to a default threshold that may be - * adjusted later by the driver's runtime code. However, if the - * ability to transmit pause frames in not enabled, then these - * registers will be set to 0. - */ - if (!(hw->fc & E1000_FC_TX_PAUSE)) { - ew32(FCRTL, 0); - ew32(FCRTH, 0); - } else { - /* We need to set up the Receive Threshold high and low water marks - * as well as (optionally) enabling the transmission of XON frames. - */ - if (hw->fc_send_xon) { - ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); - ew32(FCRTH, hw->fc_high_water); - } else { - ew32(FCRTL, hw->fc_low_water); - ew32(FCRTH, hw->fc_high_water); - } - } - return ret_val; + u32 ctrl_ext; + s32 ret_val; + u16 eeprom_data; + + DEBUGFUNC("e1000_setup_link"); + + /* Read and store word 0x0F of the EEPROM. This word contains bits + * that determine the hardware's default PAUSE (flow control) mode, + * a bit that determines whether the HW defaults to enabling or + * disabling auto-negotiation, and the direction of the + * SW defined pins. If there is no SW over-ride of the flow + * control setting, then the variable hw->fc will + * be initialized based on a value in the EEPROM. + */ + if (hw->fc == E1000_FC_DEFAULT) { + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) + hw->fc = E1000_FC_NONE; + else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == + EEPROM_WORD0F_ASM_DIR) + hw->fc = E1000_FC_TX_PAUSE; + else + hw->fc = E1000_FC_FULL; + } + + /* We want to save off the original Flow Control configuration just + * in case we get disconnected and then reconnected into a different + * hub or switch with different Flow Control capabilities. + */ + if (hw->mac_type == e1000_82542_rev2_0) + hw->fc &= (~E1000_FC_TX_PAUSE); + + if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) + hw->fc &= (~E1000_FC_RX_PAUSE); + + hw->original_fc = hw->fc; + + DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc); + + /* Take the 4 bits from EEPROM word 0x0F that determine the initial + * polarity value for the SW controlled pins, and setup the + * Extended Device Control reg with that info. + * This is needed because one of the SW controlled pins is used for + * signal detection. So this should be done before e1000_setup_pcs_link() + * or e1000_phy_setup() is called. + */ + if (hw->mac_type == e1000_82543) { + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << + SWDPIO__EXT_SHIFT); + ew32(CTRL_EXT, ctrl_ext); + } + + /* Call the necessary subroutine to configure the link. */ + ret_val = (hw->media_type == e1000_media_type_copper) ? + e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw); + + /* Initialize the flow control address, type, and PAUSE timer + * registers to their default values. This is done even if flow + * control is disabled, because it does not hurt anything to + * initialize these registers. + */ + DEBUGOUT + ("Initializing the Flow Control address, type and timer regs\n"); + + ew32(FCT, FLOW_CONTROL_TYPE); + ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); + ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); + + ew32(FCTTV, hw->fc_pause_time); + + /* Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames in not enabled, then these + * registers will be set to 0. + */ + if (!(hw->fc & E1000_FC_TX_PAUSE)) { + ew32(FCRTL, 0); + ew32(FCRTH, 0); + } else { + /* We need to set up the Receive Threshold high and low water marks + * as well as (optionally) enabling the transmission of XON frames. + */ + if (hw->fc_send_xon) { + ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); + ew32(FCRTH, hw->fc_high_water); + } else { + ew32(FCRTL, hw->fc_low_water); + ew32(FCRTH, hw->fc_high_water); + } + } + return ret_val; } -/****************************************************************************** - * Sets up link for a fiber based or serdes based adapter - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_setup_fiber_serdes_link - prepare fiber or serdes link + * @hw: Struct containing variables accessed by shared code * * Manipulates Physical Coding Sublayer functions in order to configure * link. Assumes the hardware has been previously reset and the transmitter * and receiver are not enabled. - *****************************************************************************/ + */ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) { - u32 ctrl; - u32 status; - u32 txcw = 0; - u32 i; - u32 signal = 0; - s32 ret_val; - - DEBUGFUNC("e1000_setup_fiber_serdes_link"); - - /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists - * until explicitly turned off or a power cycle is performed. A read to - * the register does not indicate its status. Therefore, we ensure - * loopback mode is disabled during initialization. - */ - if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) - ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK); - - /* On adapters with a MAC newer than 82544, SWDP 1 will be - * set when the optics detect a signal. On older adapters, it will be - * cleared when there is a signal. This applies to fiber media only. - * If we're on serdes media, adjust the output amplitude to value - * set in the EEPROM. - */ - ctrl = er32(CTRL); - if (hw->media_type == e1000_media_type_fiber) - signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; - - ret_val = e1000_adjust_serdes_amplitude(hw); - if (ret_val) - return ret_val; - - /* Take the link out of reset */ - ctrl &= ~(E1000_CTRL_LRST); - - /* Adjust VCO speed to improve BER performance */ - ret_val = e1000_set_vco_speed(hw); - if (ret_val) - return ret_val; - - e1000_config_collision_dist(hw); - - /* Check for a software override of the flow control settings, and setup - * the device accordingly. If auto-negotiation is enabled, then software - * will have to set the "PAUSE" bits to the correct value in the Tranmsit - * Config Word Register (TXCW) and re-start auto-negotiation. However, if - * auto-negotiation is disabled, then software will have to manually - * configure the two flow control enable bits in the CTRL register. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, but - * not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we do - * not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. - */ - switch (hw->fc) { - case E1000_FC_NONE: - /* Flow control is completely disabled by a software over-ride. */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); - break; - case E1000_FC_RX_PAUSE: - /* RX Flow control is enabled and TX Flow control is disabled by a - * software over-ride. Since there really isn't a way to advertise - * that we are capable of RX Pause ONLY, we will advertise that we - * support both symmetric and asymmetric RX PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - case E1000_FC_TX_PAUSE: - /* TX Flow control is enabled, and RX Flow control is disabled, by a - * software over-ride. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); - break; - case E1000_FC_FULL: - /* Flow control (both RX and TX) is enabled by a software over-ride. */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - break; - } - - /* Since auto-negotiation is enabled, take the link out of reset (the link - * will be in reset, because we previously reset the chip). This will - * restart auto-negotiation. If auto-neogtiation is successful then the - * link-up status bit will be set and the flow control enable bits (RFCE - * and TFCE) will be set according to their negotiated value. - */ - DEBUGOUT("Auto-negotiation enabled\n"); - - ew32(TXCW, txcw); - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - hw->txcw = txcw; - msleep(1); - - /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" - * indication in the Device Status Register. Time-out if a link isn't - * seen in 500 milliseconds seconds (Auto-negotiation should complete in - * less than 500 milliseconds even if the other end is doing it in SW). - * For internal serdes, we just assume a signal is present, then poll. - */ - if (hw->media_type == e1000_media_type_internal_serdes || - (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { - DEBUGOUT("Looking for Link\n"); - for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { - msleep(10); - status = er32(STATUS); - if (status & E1000_STATUS_LU) break; - } - if (i == (LINK_UP_TIMEOUT / 10)) { - DEBUGOUT("Never got a valid link from auto-neg!!!\n"); - hw->autoneg_failed = 1; - /* AutoNeg failed to achieve a link, so we'll call - * e1000_check_for_link. This routine will force the link up if - * we detect a signal. This will allow us to communicate with - * non-autonegotiating link partners. - */ - ret_val = e1000_check_for_link(hw); - if (ret_val) { - DEBUGOUT("Error while checking for link\n"); - return ret_val; - } - hw->autoneg_failed = 0; - } else { - hw->autoneg_failed = 0; - DEBUGOUT("Valid Link Found\n"); - } - } else { - DEBUGOUT("No Signal Detected\n"); - } - return E1000_SUCCESS; + u32 ctrl; + u32 status; + u32 txcw = 0; + u32 i; + u32 signal = 0; + s32 ret_val; + + DEBUGFUNC("e1000_setup_fiber_serdes_link"); + + /* On adapters with a MAC newer than 82544, SWDP 1 will be + * set when the optics detect a signal. On older adapters, it will be + * cleared when there is a signal. This applies to fiber media only. + * If we're on serdes media, adjust the output amplitude to value + * set in the EEPROM. + */ + ctrl = er32(CTRL); + if (hw->media_type == e1000_media_type_fiber) + signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; + + ret_val = e1000_adjust_serdes_amplitude(hw); + if (ret_val) + return ret_val; + + /* Take the link out of reset */ + ctrl &= ~(E1000_CTRL_LRST); + + /* Adjust VCO speed to improve BER performance */ + ret_val = e1000_set_vco_speed(hw); + if (ret_val) + return ret_val; + + e1000_config_collision_dist(hw); + + /* Check for a software override of the flow control settings, and setup + * the device accordingly. If auto-negotiation is enabled, then software + * will have to set the "PAUSE" bits to the correct value in the Tranmsit + * Config Word Register (TXCW) and re-start auto-negotiation. However, if + * auto-negotiation is disabled, then software will have to manually + * configure the two flow control enable bits in the CTRL register. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, but + * not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we do + * not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. + */ + switch (hw->fc) { + case E1000_FC_NONE: + /* Flow control is completely disabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); + break; + case E1000_FC_RX_PAUSE: + /* RX Flow control is enabled and TX Flow control is disabled by a + * software over-ride. Since there really isn't a way to advertise + * that we are capable of RX Pause ONLY, we will advertise that we + * support both symmetric and asymmetric RX PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + case E1000_FC_TX_PAUSE: + /* TX Flow control is enabled, and RX Flow control is disabled, by a + * software over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); + break; + case E1000_FC_FULL: + /* Flow control (both RX and TX) is enabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + break; + } + + /* Since auto-negotiation is enabled, take the link out of reset (the link + * will be in reset, because we previously reset the chip). This will + * restart auto-negotiation. If auto-negotiation is successful then the + * link-up status bit will be set and the flow control enable bits (RFCE + * and TFCE) will be set according to their negotiated value. + */ + DEBUGOUT("Auto-negotiation enabled\n"); + + ew32(TXCW, txcw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); + + hw->txcw = txcw; + msleep(1); + + /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" + * indication in the Device Status Register. Time-out if a link isn't + * seen in 500 milliseconds seconds (Auto-negotiation should complete in + * less than 500 milliseconds even if the other end is doing it in SW). + * For internal serdes, we just assume a signal is present, then poll. + */ + if (hw->media_type == e1000_media_type_internal_serdes || + (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { + DEBUGOUT("Looking for Link\n"); + for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { + msleep(10); + status = er32(STATUS); + if (status & E1000_STATUS_LU) + break; + } + if (i == (LINK_UP_TIMEOUT / 10)) { + DEBUGOUT("Never got a valid link from auto-neg!!!\n"); + hw->autoneg_failed = 1; + /* AutoNeg failed to achieve a link, so we'll call + * e1000_check_for_link. This routine will force the link up if + * we detect a signal. This will allow us to communicate with + * non-autonegotiating link partners. + */ + ret_val = e1000_check_for_link(hw); + if (ret_val) { + DEBUGOUT("Error while checking for link\n"); + return ret_val; + } + hw->autoneg_failed = 0; + } else { + hw->autoneg_failed = 0; + DEBUGOUT("Valid Link Found\n"); + } + } else { + DEBUGOUT("No Signal Detected\n"); + } + return E1000_SUCCESS; } -/****************************************************************************** -* Make sure we have a valid PHY and change PHY mode before link setup. -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_copper_link_preconfig - early configuration for copper + * @hw: Struct containing variables accessed by shared code + * + * Make sure we have a valid PHY and change PHY mode before link setup. + */ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) { - u32 ctrl; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_preconfig"); - - ctrl = er32(CTRL); - /* With 82543, we need to force speed and duplex on the MAC equal to what - * the PHY speed and duplex configuration is. In addition, we need to - * perform a hardware reset on the PHY to take it out of reset. - */ - if (hw->mac_type > e1000_82543) { - ctrl |= E1000_CTRL_SLU; - ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ew32(CTRL, ctrl); - } else { - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); - ew32(CTRL, ctrl); - ret_val = e1000_phy_hw_reset(hw); - if (ret_val) - return ret_val; - } - - /* Make sure we have a valid PHY */ - ret_val = e1000_detect_gig_phy(hw); - if (ret_val) { - DEBUGOUT("Error, did not detect valid phy.\n"); - return ret_val; - } - DEBUGOUT1("Phy ID = %x \n", hw->phy_id); - - /* Set PHY to class A mode (if necessary) */ - ret_val = e1000_set_phy_mode(hw); - if (ret_val) - return ret_val; - - if ((hw->mac_type == e1000_82545_rev_3) || - (hw->mac_type == e1000_82546_rev_3)) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - phy_data |= 0x00000008; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - } - - if (hw->mac_type <= e1000_82543 || - hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) - hw->phy_reset_disable = false; - - return E1000_SUCCESS; -} + u32 ctrl; + s32 ret_val; + u16 phy_data; + DEBUGFUNC("e1000_copper_link_preconfig"); -/******************************************************************** -* Copper link setup for e1000_phy_igp series. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ -static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) -{ - u32 led_ctrl; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_igp_setup"); - - if (hw->phy_reset_disable) - return E1000_SUCCESS; - - ret_val = e1000_phy_reset(hw); - if (ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - - /* Wait 15ms for MAC to configure PHY from eeprom settings */ - msleep(15); - if (hw->mac_type != e1000_ich8lan) { - /* Configure activity LED after PHY reset */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); - } - - /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ - if (hw->phy_type == e1000_phy_igp) { - /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, false); - if (ret_val) { - DEBUGOUT("Error Disabling LPLU D3\n"); - return ret_val; - } - } - - /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, false); - if (ret_val) { - DEBUGOUT("Error Disabling LPLU D0\n"); - return ret_val; - } - /* Configure mdi-mdix settings */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); - if (ret_val) - return ret_val; - - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - hw->dsp_config_state = e1000_dsp_config_disabled; - /* Force MDI for earlier revs of the IGP PHY */ - phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX); - hw->mdix = 1; - - } else { - hw->dsp_config_state = e1000_dsp_config_enabled; - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - - switch (hw->mdix) { - case 1: - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 2: - phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 0: - default: - phy_data |= IGP01E1000_PSCR_AUTO_MDIX; - break; - } - } - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* set auto-master slave resolution settings */ - if (hw->autoneg) { - e1000_ms_type phy_ms_setting = hw->master_slave; - - if (hw->ffe_config_state == e1000_ffe_config_active) - hw->ffe_config_state = e1000_ffe_config_enabled; - - if (hw->dsp_config_state == e1000_dsp_config_activated) - hw->dsp_config_state = e1000_dsp_config_enabled; - - /* when autonegotiation advertisment is only 1000Mbps then we - * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ - if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { - /* Disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - /* Set auto Master/Slave resolution process */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if (ret_val) - return ret_val; - phy_data &= ~CR_1000T_MS_ENABLE; - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if (ret_val) - return ret_val; - } - - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* load defaults for future use */ - hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : - e1000_ms_auto; - - switch (phy_ms_setting) { - case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; - default: - break; - } - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + ctrl = er32(CTRL); + /* With 82543, we need to force speed and duplex on the MAC equal to what + * the PHY speed and duplex configuration is. In addition, we need to + * perform a hardware reset on the PHY to take it out of reset. + */ + if (hw->mac_type > e1000_82543) { + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ew32(CTRL, ctrl); + } else { + ctrl |= + (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); + ew32(CTRL, ctrl); + ret_val = e1000_phy_hw_reset(hw); + if (ret_val) + return ret_val; + } + + /* Make sure we have a valid PHY */ + ret_val = e1000_detect_gig_phy(hw); + if (ret_val) { + DEBUGOUT("Error, did not detect valid phy.\n"); + return ret_val; + } + DEBUGOUT1("Phy ID = %x \n", hw->phy_id); + + /* Set PHY to class A mode (if necessary) */ + ret_val = e1000_set_phy_mode(hw); + if (ret_val) + return ret_val; + + if ((hw->mac_type == e1000_82545_rev_3) || + (hw->mac_type == e1000_82546_rev_3)) { + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + phy_data |= 0x00000008; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + } + + if (hw->mac_type <= e1000_82543 || + hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || + hw->mac_type == e1000_82541_rev_2 + || hw->mac_type == e1000_82547_rev_2) + hw->phy_reset_disable = false; + + return E1000_SUCCESS; } -/******************************************************************** -* Copper link setup for e1000_phy_gg82563 series. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ -static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw) +/** + * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series. + * @hw: Struct containing variables accessed by shared code + */ +static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - u32 reg_data; - - DEBUGFUNC("e1000_copper_link_ggp_setup"); - - if (!hw->phy_reset_disable) { - - /* Enable CRS on TX for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; - /* Use 25MHz for both link down and 1000BASE-T for Tx clock */ - phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ; - - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, - phy_data); - if (ret_val) - return ret_val; - - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK; - - switch (hw->mdix) { - case 1: - phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI; - break; - case 2: - phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX; - break; - case 0: - default: - phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO; - break; - } - - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE; - if (hw->disable_polarity_correction == 1) - phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data); - - if (ret_val) - return ret_val; - - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if (ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - } /* phy_reset_disable */ - - if (hw->mac_type == e1000_80003es2lan) { - /* Bypass RX and TX FIFO's */ - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL, - E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS | - E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data); - - if (ret_val) - return ret_val; - - reg_data = er32(CTRL_EXT); - reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK); - ew32(CTRL_EXT, reg_data); - - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - /* Do not init these registers when the HW is in IAMT mode, since the - * firmware will have already initialized them. We only initialize - * them if the HW is not in IAMT mode. - */ - if (!e1000_check_mng_mode(hw)) { - /* Enable Electrical Idle on the PHY */ - phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, - phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, - phy_data); - - if (ret_val) - return ret_val; - } - - /* Workaround: Disable padding in Kumeran interface in the MAC - * and in the PHY to avoid CRC errors. - */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL, - &phy_data); - if (ret_val) - return ret_val; - phy_data |= GG82563_ICR_DIS_PADDING; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL, - phy_data); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + u32 led_ctrl; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_igp_setup"); + + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } + + /* Wait 15ms for MAC to configure PHY from eeprom settings */ + msleep(15); + /* Configure activity LED after PHY reset */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + + /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ + if (hw->phy_type == e1000_phy_igp) { + /* disable lplu d3 during driver init */ + ret_val = e1000_set_d3_lplu_state(hw, false); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } + } + + /* Configure mdi-mdix settings */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + hw->dsp_config_state = e1000_dsp_config_disabled; + /* Force MDI for earlier revs of the IGP PHY */ + phy_data &= + ~(IGP01E1000_PSCR_AUTO_MDIX | + IGP01E1000_PSCR_FORCE_MDI_MDIX); + hw->mdix = 1; + + } else { + hw->dsp_config_state = e1000_dsp_config_enabled; + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + + switch (hw->mdix) { + case 1: + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + phy_data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + } + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* set auto-master slave resolution settings */ + if (hw->autoneg) { + e1000_ms_type phy_ms_setting = hw->master_slave; + + if (hw->ffe_config_state == e1000_ffe_config_active) + hw->ffe_config_state = e1000_ffe_config_enabled; + + if (hw->dsp_config_state == e1000_dsp_config_activated) + hw->dsp_config_state = e1000_dsp_config_enabled; + + /* when autonegotiation advertisement is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. */ + if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; + /* Set auto Master/Slave resolution process */ + ret_val = + e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~CR_1000T_MS_ENABLE; + ret_val = + e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* load defaults for future use */ + hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : e1000_ms_auto; + + switch (phy_ms_setting) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + default: + break; + } + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; } -/******************************************************************** -* Copper link setup for e1000_phy_m88 series. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ +/** + * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series. + * @hw: Struct containing variables accessed by shared code + */ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_mgp_setup"); - - if (hw->phy_reset_disable) - return E1000_SUCCESS; - - /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - - switch (hw->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - case 0: - default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } - - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (hw->disable_polarity_correction == 1) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - if (hw->phy_revision < M88E1011_I_REV_4) { - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_EPSCR_TX_CLK_25; - - if ((hw->phy_revision == E1000_REVISION_2) && - (hw->phy_id == M88E1111_I_PHY_ID)) { - /* Vidalia Phy, set the downshift counter to 5x */ - phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK); - phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; - ret_val = e1000_write_phy_reg(hw, - M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - } else { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - ret_val = e1000_write_phy_reg(hw, - M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - } - } - - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if (ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_mgp_setup"); + + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on TX. This must be set for half-duplex operation. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (hw->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (hw->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if (hw->phy_revision < M88E1011_I_REV_4) { + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((hw->phy_revision == E1000_REVISION_2) && + (hw->phy_id == M88E1111_I_PHY_ID)) { + /* Vidalia Phy, set the downshift counter to 5x */ + phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK); + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + ret_val = e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + ret_val = e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + } + + /* SW Reset the PHY so all changes take effect */ + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } + + return E1000_SUCCESS; } -/******************************************************************** -* Setup auto-negotiation and flow control advertisements, -* and then perform auto-negotiation. -* -* hw - Struct containing variables accessed by shared code -*********************************************************************/ +/** + * e1000_copper_link_autoneg - setup auto-neg + * @hw: Struct containing variables accessed by shared code + * + * Setup auto-negotiation and flow control advertisements, + * and then perform auto-negotiation. + */ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_copper_link_autoneg"); - - /* Perform some bounds checking on the hw->autoneg_advertised - * parameter. If this variable is zero, then set it to the default. - */ - hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; - - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if (hw->autoneg_advertised == 0) - hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; - - /* IFE phy only supports 10/100 */ - if (hw->phy_type == e1000_phy_ife) - hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL; - - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - return ret_val; - } - DEBUGOUT("Restarting Auto-Neg\n"); - - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if (hw->wait_autoneg_complete) { - ret_val = e1000_wait_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error while waiting for autoneg to complete\n"); - return ret_val; - } - } - - hw->get_link_status = true; - - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the hw->autoneg_advertised + * parameter. If this variable is zero, then set it to the default. + */ + hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (hw->autoneg_advertised == 0) + hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (hw->wait_autoneg_complete) { + ret_val = e1000_wait_autoneg(hw); + if (ret_val) { + DEBUGOUT + ("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->get_link_status = true; + + return E1000_SUCCESS; } -/****************************************************************************** -* Config the MAC and the PHY after link is up. -* 1) Set up the MAC to the current PHY speed/duplex -* if we are on 82543. If we -* are on newer silicon, we only need to configure -* collision distance in the Transmit Control Register. -* 2) Set up flow control on the MAC to that established with -* the link partner. -* 3) Config DSP to improve Gigabit link quality for some PHY revisions. -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_copper_link_postconfig - post link setup + * @hw: Struct containing variables accessed by shared code + * + * Config the MAC and the PHY after link is up. + * 1) Set up the MAC to the current PHY speed/duplex + * if we are on 82543. If we + * are on newer silicon, we only need to configure + * collision distance in the Transmit Control Register. + * 2) Set up flow control on the MAC to that established with + * the link partner. + * 3) Config DSP to improve Gigabit link quality for some PHY revisions. + */ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { - s32 ret_val; - DEBUGFUNC("e1000_copper_link_postconfig"); - - if (hw->mac_type >= e1000_82544) { - e1000_config_collision_dist(hw); - } else { - ret_val = e1000_config_mac_to_phy(hw); - if (ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - ret_val = e1000_config_fc_after_link_up(hw); - if (ret_val) { - DEBUGOUT("Error Configuring Flow Control\n"); - return ret_val; - } - - /* Config DSP to improve Giga link quality */ - if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, true); - if (ret_val) { - DEBUGOUT("Error Configuring DSP after link up\n"); - return ret_val; - } - } - - return E1000_SUCCESS; + s32 ret_val; + DEBUGFUNC("e1000_copper_link_postconfig"); + + if (hw->mac_type >= e1000_82544) { + e1000_config_collision_dist(hw); + } else { + ret_val = e1000_config_mac_to_phy(hw); + if (ret_val) { + DEBUGOUT("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + ret_val = e1000_config_fc_after_link_up(hw); + if (ret_val) { + DEBUGOUT("Error Configuring Flow Control\n"); + return ret_val; + } + + /* Config DSP to improve Giga link quality */ + if (hw->phy_type == e1000_phy_igp) { + ret_val = e1000_config_dsp_after_link_change(hw, true); + if (ret_val) { + DEBUGOUT("Error Configuring DSP after link up\n"); + return ret_val; + } + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Detects which PHY is present and setup the speed and duplex -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_setup_copper_link - phy/speed/duplex setting + * @hw: Struct containing variables accessed by shared code + * + * Detects which PHY is present and sets up the speed and duplex + */ static s32 e1000_setup_copper_link(struct e1000_hw *hw) { - s32 ret_val; - u16 i; - u16 phy_data; - u16 reg_data = 0; - - DEBUGFUNC("e1000_setup_copper_link"); - - switch (hw->mac_type) { - case e1000_80003es2lan: - case e1000_ich8lan: - /* Set the mac to wait the maximum time between each - * iteration and increase the max iterations when - * polling the phy; this fixes erroneous timeouts at 10Mbps. */ - ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); - if (ret_val) - return ret_val; - ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data); - if (ret_val) - return ret_val; - reg_data |= 0x3F; - ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data); - if (ret_val) - return ret_val; - default: - break; - } - - /* Check if it is a valid PHY and set PHY mode if necessary. */ - ret_val = e1000_copper_link_preconfig(hw); - if (ret_val) - return ret_val; - - switch (hw->mac_type) { - case e1000_80003es2lan: - /* Kumeran registers are written-only */ - reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT; - reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING; - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL, - reg_data); - if (ret_val) - return ret_val; - break; - default: - break; - } - - if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) { - ret_val = e1000_copper_link_igp_setup(hw); - if (ret_val) - return ret_val; - } else if (hw->phy_type == e1000_phy_m88) { - ret_val = e1000_copper_link_mgp_setup(hw); - if (ret_val) - return ret_val; - } else if (hw->phy_type == e1000_phy_gg82563) { - ret_val = e1000_copper_link_ggp_setup(hw); - if (ret_val) - return ret_val; - } - - if (hw->autoneg) { - /* Setup autoneg and flow control advertisement - * and perform autonegotiation */ - ret_val = e1000_copper_link_autoneg(hw); - if (ret_val) - return ret_val; - } else { - /* PHY will be set to 10H, 10F, 100H,or 100F - * depending on value from forced_speed_duplex. */ - DEBUGOUT("Forcing speed and duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); - if (ret_val) { - DEBUGOUT("Error Forcing Speed and Duplex\n"); - return ret_val; - } - } - - /* Check link status. Wait up to 100 microseconds for link to become - * valid. - */ - for (i = 0; i < 10; i++) { - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if (phy_data & MII_SR_LINK_STATUS) { - /* Config the MAC and PHY after link is up */ - ret_val = e1000_copper_link_postconfig(hw); - if (ret_val) - return ret_val; - - DEBUGOUT("Valid link established!!!\n"); - return E1000_SUCCESS; - } - udelay(10); - } - - DEBUGOUT("Unable to establish link!!!\n"); - return E1000_SUCCESS; + s32 ret_val; + u16 i; + u16 phy_data; + + DEBUGFUNC("e1000_setup_copper_link"); + + /* Check if it is a valid PHY and set PHY mode if necessary. */ + ret_val = e1000_copper_link_preconfig(hw); + if (ret_val) + return ret_val; + + if (hw->phy_type == e1000_phy_igp) { + ret_val = e1000_copper_link_igp_setup(hw); + if (ret_val) + return ret_val; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_copper_link_mgp_setup(hw); + if (ret_val) + return ret_val; + } + + if (hw->autoneg) { + /* Setup autoneg and flow control advertisement + * and perform autonegotiation */ + ret_val = e1000_copper_link_autoneg(hw); + if (ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H,or 100F + * depending on value from forced_speed_duplex. */ + DEBUGOUT("Forcing speed and duplex\n"); + ret_val = e1000_phy_force_speed_duplex(hw); + if (ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + for (i = 0; i < 10; i++) { + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & MII_SR_LINK_STATUS) { + /* Config the MAC and PHY after link is up */ + ret_val = e1000_copper_link_postconfig(hw); + if (ret_val) + return ret_val; + + DEBUGOUT("Valid link established!!!\n"); + return E1000_SUCCESS; + } + udelay(10); + } + + DEBUGOUT("Unable to establish link!!!\n"); + return E1000_SUCCESS; } -/****************************************************************************** -* Configure the MAC-to-PHY interface for 10/100Mbps -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ -static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) +/** + * e1000_phy_setup_autoneg - phy settings + * @hw: Struct containing variables accessed by shared code + * + * Configures PHY autoneg and flow control advertisement settings + */ +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) { - s32 ret_val = E1000_SUCCESS; - u32 tipg; - u16 reg_data; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; - DEBUGFUNC("e1000_configure_kmrn_for_10_100"); + DEBUGFUNC("e1000_phy_setup_autoneg"); - reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT; - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL, - reg_data); - if (ret_val) - return ret_val; + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if (ret_val) + return ret_val; - /* Configure Transmit Inter-Packet Gap */ - tipg = er32(TIPG); - tipg &= ~E1000_TIPG_IPGT_MASK; - tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100; - ew32(TIPG, tipg); + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = + e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ - if (ret_val) - return ret_val; + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~REG4_SPEED_MASK; + mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK; - if (duplex == HALF_DUPLEX) - reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER; - else - reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; + DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised); - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); + /* Do we want to advertise 10 Mb Half Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_10_HALF) { + DEBUGOUT("Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } - return ret_val; -} + /* Do we want to advertise 10 Mb Full Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_10_FULL) { + DEBUGOUT("Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } -static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 reg_data; - u32 tipg; + /* Do we want to advertise 100 Mb Half Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_100_HALF) { + DEBUGOUT("Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } - DEBUGFUNC("e1000_configure_kmrn_for_1000"); + /* Do we want to advertise 100 Mb Full Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_100_FULL) { + DEBUGOUT("Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } - reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT; - ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL, - reg_data); - if (ret_val) - return ret_val; + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (hw->autoneg_advertised & ADVERTISE_1000_HALF) { + DEBUGOUT + ("Advertise 1000mb Half duplex requested, request denied!\n"); + } - /* Configure Transmit Inter-Packet Gap */ - tipg = er32(TIPG); - tipg &= ~E1000_TIPG_IPGT_MASK; - tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - ew32(TIPG, tipg); + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (hw->autoneg_advertised & ADVERTISE_1000_FULL) { + DEBUGOUT("Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); + /* Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc) { + case E1000_FC_NONE: /* 0 */ + /* Flow control (RX & TX) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case E1000_FC_RX_PAUSE: /* 1 */ + /* RX Flow control is enabled, and TX Flow control is + * disabled, by a software over-ride. + */ + /* Since there really isn't a way to advertise that we are + * capable of RX Pause ONLY, we will advertise that we + * support both symmetric and asymmetric RX PAUSE. Later + * (in e1000_config_fc_after_link_up) we will disable the + *hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case E1000_FC_TX_PAUSE: /* 2 */ + /* TX Flow control is enabled, and RX Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case E1000_FC_FULL: /* 3 */ + /* Flow control (both RX and TX) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } - if (ret_val) - return ret_val; + ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; - reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); + DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - return ret_val; -} + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; -/****************************************************************************** -* Configures PHY autoneg and flow control advertisement settings -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ -s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) -{ - s32 ret_val; - u16 mii_autoneg_adv_reg; - u16 mii_1000t_ctrl_reg; - - DEBUGFUNC("e1000_phy_setup_autoneg"); - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - if (hw->phy_type != e1000_phy_ife) { - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - } else - mii_1000t_ctrl_reg=0; - - /* Need to parse both autoneg_advertised and fc and set up - * the appropriate PHY registers. First we will parse for - * autoneg_advertised software override. Since we can advertise - * a plethora of combinations, we need to check each bit - * individually. - */ - - /* First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~REG4_SPEED_MASK; - mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK; - - DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised); - - /* Do we want to advertise 10 Mb Half Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_10_HALF) { - DEBUGOUT("Advertise 10mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; - } - - /* Do we want to advertise 10 Mb Full Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_10_FULL) { - DEBUGOUT("Advertise 10mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; - } - - /* Do we want to advertise 100 Mb Half Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_100_HALF) { - DEBUGOUT("Advertise 100mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; - } - - /* Do we want to advertise 100 Mb Full Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_100_FULL) { - DEBUGOUT("Advertise 100mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; - } - - /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ - if (hw->autoneg_advertised & ADVERTISE_1000_HALF) { - DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n"); - } - - /* Do we want to advertise 1000 Mb Full Duplex? */ - if (hw->autoneg_advertised & ADVERTISE_1000_FULL) { - DEBUGOUT("Advertise 1000mb Full duplex\n"); - mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; - if (hw->phy_type == e1000_phy_ife) { - DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n"); - } - } - - /* Check for a software override of the flow control settings, and - * setup the PHY advertisement registers accordingly. If - * auto-negotiation is enabled, then software will have to set the - * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * but we do not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. - * other: No software override. The flow control configuration - * in the EEPROM is used. - */ - switch (hw->fc) { - case E1000_FC_NONE: /* 0 */ - /* Flow control (RX & TX) is completely disabled by a - * software over-ride. - */ - mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - case E1000_FC_RX_PAUSE: /* 1 */ - /* RX Flow control is enabled, and TX Flow control is - * disabled, by a software over-ride. - */ - /* Since there really isn't a way to advertise that we are - * capable of RX Pause ONLY, we will advertise that we - * support both symmetric and asymmetric RX PAUSE. Later - * (in e1000_config_fc_after_link_up) we will disable the - *hw's ability to send PAUSE frames. - */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - case E1000_FC_TX_PAUSE: /* 2 */ - /* TX Flow control is enabled, and RX Flow control is - * disabled, by a software over-ride. - */ - mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; - mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; - break; - case E1000_FC_FULL: /* 3 */ - /* Flow control (both RX and TX) is enabled by a software - * over-ride. - */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - - if (hw->phy_type != e1000_phy_ife) { - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** -* Force PHY speed and duplex settings to hw->forced_speed_duplex -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_phy_force_speed_duplex - force link settings + * @hw: Struct containing variables accessed by shared code + * + * Force PHY speed and duplex settings to hw->forced_speed_duplex + */ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) { - u32 ctrl; - s32 ret_val; - u16 mii_ctrl_reg; - u16 mii_status_reg; - u16 phy_data; - u16 i; - - DEBUGFUNC("e1000_phy_force_speed_duplex"); - - /* Turn off Flow control if we are forcing speed and duplex. */ - hw->fc = E1000_FC_NONE; - - DEBUGOUT1("hw->fc = %d\n", hw->fc); - - /* Read the Device Control Register. */ - ctrl = er32(CTRL); - - /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */ - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ctrl &= ~(DEVICE_SPEED_MASK); - - /* Clear the Auto Speed Detect Enable bit. */ - ctrl &= ~E1000_CTRL_ASDE; - - /* Read the MII Control Register. */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg); - if (ret_val) - return ret_val; - - /* We need to disable autoneg in order to force link and duplex. */ - - mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN; - - /* Are we forcing Full or Half Duplex? */ - if (hw->forced_speed_duplex == e1000_100_full || - hw->forced_speed_duplex == e1000_10_full) { - /* We want to force full duplex so we SET the full duplex bits in the - * Device and MII Control Registers. - */ - ctrl |= E1000_CTRL_FD; - mii_ctrl_reg |= MII_CR_FULL_DUPLEX; - DEBUGOUT("Full Duplex\n"); - } else { - /* We want to force half duplex so we CLEAR the full duplex bits in - * the Device and MII Control Registers. - */ - ctrl &= ~E1000_CTRL_FD; - mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX; - DEBUGOUT("Half Duplex\n"); - } - - /* Are we forcing 100Mbps??? */ - if (hw->forced_speed_duplex == e1000_100_full || - hw->forced_speed_duplex == e1000_100_half) { - /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */ - ctrl |= E1000_CTRL_SPD_100; - mii_ctrl_reg |= MII_CR_SPEED_100; - mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - DEBUGOUT("Forcing 100mb "); - } else { - /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */ - ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - mii_ctrl_reg |= MII_CR_SPEED_10; - mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - DEBUGOUT("Forcing 10mb "); - } - - e1000_config_collision_dist(hw); - - /* Write the configured values back to the Device Control Reg. */ - ew32(CTRL, ctrl); - - if ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563)) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI - * forced whenever speed are duplex are forced. - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data); - - /* Need to reset the PHY or these changes will be ignored */ - mii_ctrl_reg |= MII_CR_RESET; - - /* Disable MDI-X support for 10/100 */ - } else if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IFE_PMC_AUTO_MDIX; - phy_data &= ~IFE_PMC_FORCE_MDIX; - - ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data); - if (ret_val) - return ret_val; - - } else { - /* Clear Auto-Crossover to force MDI manually. IGP requires MDI - * forced whenever speed or duplex are forced. - */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if (ret_val) - return ret_val; - } - - /* Write back the modified PHY MII control register. */ - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg); - if (ret_val) - return ret_val; - - udelay(1); - - /* The wait_autoneg_complete flag may be a little misleading here. - * Since we are forcing speed and duplex, Auto-Neg is not enabled. - * But we do want to delay for a period while forcing only so we - * don't generate false No Link messages. So we will wait here - * only if the user has set wait_autoneg_complete to 1, which is - * the default. - */ - if (hw->wait_autoneg_complete) { - /* We will wait for autoneg to complete. */ - DEBUGOUT("Waiting for forced speed/duplex link.\n"); - mii_status_reg = 0; - - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (mii_status_reg & MII_SR_LINK_STATUS) break; - msleep(100); - } - if ((i == 0) && - ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563))) { - /* We didn't get link. Reset the DSP and wait again for link. */ - ret_val = e1000_phy_reset_dsp(hw); - if (ret_val) { - DEBUGOUT("Error Resetting PHY DSP\n"); - return ret_val; - } - } - /* This loop will early-out if the link condition has been met. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - if (mii_status_reg & MII_SR_LINK_STATUS) break; - msleep(100); - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - } - } - - if (hw->phy_type == e1000_phy_m88) { - /* Because we reset the PHY above, we need to re-force TX_CLK in the - * Extended PHY Specific Control Register to 25MHz clock. This value - * defaults back to a 2.5MHz clock when the PHY is reset. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_EPSCR_TX_CLK_25; - ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - /* In addition, because of the s/w reset above, we need to enable CRS on - * TX. This must be set for both full and half duplex operation. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - - if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && - (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full || - hw->forced_speed_duplex == e1000_10_half)) { - ret_val = e1000_polarity_reversal_workaround(hw); - if (ret_val) - return ret_val; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - /* The TX_CLK of the Extended PHY Specific Control Register defaults - * to 2.5MHz on a reset. We need to re-force it back to 25MHz, if - * we're not in a forced 10/duplex configuration. */ - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~GG82563_MSCR_TX_CLK_MASK; - if ((hw->forced_speed_duplex == e1000_10_full) || - (hw->forced_speed_duplex == e1000_10_half)) - phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ; - else - phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ; - - /* Also due to the reset, we need to enable CRS on Tx. */ - phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; - - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data); - if (ret_val) - return ret_val; - } - return E1000_SUCCESS; + u32 ctrl; + s32 ret_val; + u16 mii_ctrl_reg; + u16 mii_status_reg; + u16 phy_data; + u16 i; + + DEBUGFUNC("e1000_phy_force_speed_duplex"); + + /* Turn off Flow control if we are forcing speed and duplex. */ + hw->fc = E1000_FC_NONE; + + DEBUGOUT1("hw->fc = %d\n", hw->fc); + + /* Read the Device Control Register. */ + ctrl = er32(CTRL); + + /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */ + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~(DEVICE_SPEED_MASK); + + /* Clear the Auto Speed Detect Enable bit. */ + ctrl &= ~E1000_CTRL_ASDE; + + /* Read the MII Control Register. */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg); + if (ret_val) + return ret_val; + + /* We need to disable autoneg in order to force link and duplex. */ + + mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN; + + /* Are we forcing Full or Half Duplex? */ + if (hw->forced_speed_duplex == e1000_100_full || + hw->forced_speed_duplex == e1000_10_full) { + /* We want to force full duplex so we SET the full duplex bits in the + * Device and MII Control Registers. + */ + ctrl |= E1000_CTRL_FD; + mii_ctrl_reg |= MII_CR_FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + /* We want to force half duplex so we CLEAR the full duplex bits in + * the Device and MII Control Registers. + */ + ctrl &= ~E1000_CTRL_FD; + mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } + + /* Are we forcing 100Mbps??? */ + if (hw->forced_speed_duplex == e1000_100_full || + hw->forced_speed_duplex == e1000_100_half) { + /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */ + ctrl |= E1000_CTRL_SPD_100; + mii_ctrl_reg |= MII_CR_SPEED_100; + mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + DEBUGOUT("Forcing 100mb "); + } else { + /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */ + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + mii_ctrl_reg |= MII_CR_SPEED_10; + mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + DEBUGOUT("Forcing 10mb "); + } + + e1000_config_collision_dist(hw); + + /* Write the configured values back to the Device Control Reg. */ + ew32(CTRL, ctrl); + + if (hw->phy_type == e1000_phy_m88) { + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI + * forced whenever speed are duplex are forced. + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data); + + /* Need to reset the PHY or these changes will be ignored */ + mii_ctrl_reg |= MII_CR_RESET; + + /* Disable MDI-X support for 10/100 */ + } else { + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI + * forced whenever speed or duplex are forced. + */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + } + + /* Write back the modified PHY MII control register. */ + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg); + if (ret_val) + return ret_val; + + udelay(1); + + /* The wait_autoneg_complete flag may be a little misleading here. + * Since we are forcing speed and duplex, Auto-Neg is not enabled. + * But we do want to delay for a period while forcing only so we + * don't generate false No Link messages. So we will wait here + * only if the user has set wait_autoneg_complete to 1, which is + * the default. + */ + if (hw->wait_autoneg_complete) { + /* We will wait for autoneg to complete. */ + DEBUGOUT("Waiting for forced speed/duplex link.\n"); + mii_status_reg = 0; + + /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Auto-Neg Complete bit + * to be set. + */ + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (mii_status_reg & MII_SR_LINK_STATUS) + break; + msleep(100); + } + if ((i == 0) && (hw->phy_type == e1000_phy_m88)) { + /* We didn't get link. Reset the DSP and wait again for link. */ + ret_val = e1000_phy_reset_dsp(hw); + if (ret_val) { + DEBUGOUT("Error Resetting PHY DSP\n"); + return ret_val; + } + } + /* This loop will early-out if the link condition has been met. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + if (mii_status_reg & MII_SR_LINK_STATUS) + break; + msleep(100); + /* Read the MII Status Register and wait for Auto-Neg Complete bit + * to be set. + */ + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + ret_val = + e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + } + } + + if (hw->phy_type == e1000_phy_m88) { + /* Because we reset the PHY above, we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock. This value + * defaults back to a 2.5MHz clock when the PHY is reset. + */ + ret_val = + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = + e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + + /* In addition, because of the s/w reset above, we need to enable CRS on + * TX. This must be set for both full and half duplex operation. + */ + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) + && (!hw->autoneg) + && (hw->forced_speed_duplex == e1000_10_full + || hw->forced_speed_duplex == e1000_10_half)) { + ret_val = e1000_polarity_reversal_workaround(hw); + if (ret_val) + return ret_val; + } + } + return E1000_SUCCESS; } -/****************************************************************************** -* Sets the collision distance in the Transmit Control register -* -* hw - Struct containing variables accessed by shared code -* -* Link should have been established previously. Reads the speed and duplex -* information from the Device Status register. -******************************************************************************/ +/** + * e1000_config_collision_dist - set collision distance register + * @hw: Struct containing variables accessed by shared code + * + * Sets the collision distance in the Transmit Control register. + * Link should have been established previously. Reads the speed and duplex + * information from the Device Status register. + */ void e1000_config_collision_dist(struct e1000_hw *hw) { - u32 tctl, coll_dist; + u32 tctl, coll_dist; - DEBUGFUNC("e1000_config_collision_dist"); + DEBUGFUNC("e1000_config_collision_dist"); - if (hw->mac_type < e1000_82543) - coll_dist = E1000_COLLISION_DISTANCE_82542; - else - coll_dist = E1000_COLLISION_DISTANCE; + if (hw->mac_type < e1000_82543) + coll_dist = E1000_COLLISION_DISTANCE_82542; + else + coll_dist = E1000_COLLISION_DISTANCE; - tctl = er32(TCTL); + tctl = er32(TCTL); - tctl &= ~E1000_TCTL_COLD; - tctl |= coll_dist << E1000_COLD_SHIFT; + tctl &= ~E1000_TCTL_COLD; + tctl |= coll_dist << E1000_COLD_SHIFT; - ew32(TCTL, tctl); - E1000_WRITE_FLUSH(); + ew32(TCTL, tctl); + E1000_WRITE_FLUSH(); } -/****************************************************************************** -* Sets MAC speed and duplex settings to reflect the those in the PHY -* -* hw - Struct containing variables accessed by shared code -* mii_reg - data to write to the MII control register -* -* The contents of the PHY register containing the needed information need to -* be passed in. -******************************************************************************/ +/** + * e1000_config_mac_to_phy - sync phy and mac settings + * @hw: Struct containing variables accessed by shared code + * @mii_reg: data to write to the MII control register + * + * Sets MAC speed and duplex settings to reflect the those in the PHY + * The contents of the PHY register containing the needed information need to + * be passed in. + */ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) { - u32 ctrl; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_config_mac_to_phy"); - - /* 82544 or newer MAC, Auto Speed Detection takes care of - * MAC speed/duplex configuration.*/ - if (hw->mac_type >= e1000_82544) - return E1000_SUCCESS; - - /* Read the Device Control Register and set the bits to Force Speed - * and Duplex. - */ - ctrl = er32(CTRL); - ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); - - /* Set up duplex in the Device Control and Transmit Control - * registers depending on negotiated values. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if (phy_data & M88E1000_PSSR_DPLX) - ctrl |= E1000_CTRL_FD; - else - ctrl &= ~E1000_CTRL_FD; - - e1000_config_collision_dist(hw); - - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) - ctrl |= E1000_CTRL_SPD_1000; - else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) - ctrl |= E1000_CTRL_SPD_100; - - /* Write the configured values back to the Device Control Reg. */ - ew32(CTRL, ctrl); - return E1000_SUCCESS; + u32 ctrl; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_config_mac_to_phy"); + + /* 82544 or newer MAC, Auto Speed Detection takes care of + * MAC speed/duplex configuration.*/ + if (hw->mac_type >= e1000_82544) + return E1000_SUCCESS; + + /* Read the Device Control Register and set the bits to Force Speed + * and Duplex. + */ + ctrl = er32(CTRL); + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); + + /* Set up duplex in the Device Control and Transmit Control + * registers depending on negotiated values. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & M88E1000_PSSR_DPLX) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; + + e1000_config_collision_dist(hw); + + /* Set up speed in the Device Control register depending on + * negotiated values. + */ + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + ctrl |= E1000_CTRL_SPD_1000; + else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) + ctrl |= E1000_CTRL_SPD_100; + + /* Write the configured values back to the Device Control Reg. */ + ew32(CTRL, ctrl); + return E1000_SUCCESS; } -/****************************************************************************** - * Forces the MAC's flow control settings. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_force_mac_fc - force flow control settings + * @hw: Struct containing variables accessed by shared code * + * Forces the MAC's flow control settings. * Sets the TFCE and RFCE bits in the device control register to reflect * the adapter settings. TFCE and RFCE need to be explicitly set by * software when a Copper PHY is used because autonegotiation is managed * by the PHY rather than the MAC. Software must also configure these * bits when link is forced on a fiber connection. - *****************************************************************************/ + */ s32 e1000_force_mac_fc(struct e1000_hw *hw) { - u32 ctrl; - - DEBUGFUNC("e1000_force_mac_fc"); - - /* Get the current configuration of the Device Control Register */ - ctrl = er32(CTRL); - - /* Because we didn't get link via the internal auto-negotiation - * mechanism (we either forced link or we got link via PHY - * auto-neg), we have to manually enable/disable transmit an - * receive flow control. - * - * The "Case" statement below enables/disable flow control - * according to the "hw->fc" parameter. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). - * 3: Both Rx and TX flow control (symmetric) is enabled. - * other: No other values should be possible at this point. - */ - - switch (hw->fc) { - case E1000_FC_NONE: - ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); - break; - case E1000_FC_RX_PAUSE: - ctrl &= (~E1000_CTRL_TFCE); - ctrl |= E1000_CTRL_RFCE; - break; - case E1000_FC_TX_PAUSE: - ctrl &= (~E1000_CTRL_RFCE); - ctrl |= E1000_CTRL_TFCE; - break; - case E1000_FC_FULL: - ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); - break; - default: - DEBUGOUT("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - /* Disable TX Flow Control for 82542 (rev 2.0) */ - if (hw->mac_type == e1000_82542_rev2_0) - ctrl &= (~E1000_CTRL_TFCE); - - ew32(CTRL, ctrl); - return E1000_SUCCESS; + u32 ctrl; + + DEBUGFUNC("e1000_force_mac_fc"); + + /* Get the current configuration of the Device Control Register */ + ctrl = er32(CTRL); + + /* Because we didn't get link via the internal auto-negotiation + * mechanism (we either forced link or we got link via PHY + * auto-neg), we have to manually enable/disable transmit an + * receive flow control. + * + * The "Case" statement below enables/disable flow control + * according to the "hw->fc" parameter. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause + * frames but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * frames but we do not receive pause frames). + * 3: Both Rx and TX flow control (symmetric) is enabled. + * other: No other values should be possible at this point. + */ + + switch (hw->fc) { + case E1000_FC_NONE: + ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); + break; + case E1000_FC_RX_PAUSE: + ctrl &= (~E1000_CTRL_TFCE); + ctrl |= E1000_CTRL_RFCE; + break; + case E1000_FC_TX_PAUSE: + ctrl &= (~E1000_CTRL_RFCE); + ctrl |= E1000_CTRL_TFCE; + break; + case E1000_FC_FULL: + ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + /* Disable TX Flow Control for 82542 (rev 2.0) */ + if (hw->mac_type == e1000_82542_rev2_0) + ctrl &= (~E1000_CTRL_TFCE); + + ew32(CTRL, ctrl); + return E1000_SUCCESS; } -/****************************************************************************** - * Configures flow control settings after link is established - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_config_fc_after_link_up - configure flow control after autoneg + * @hw: Struct containing variables accessed by shared code * + * Configures flow control settings after link is established * Should be called immediately after a valid link has been established. * Forces MAC flow control settings if link was forced. When in MII/GMII mode * and autonegotiation is enabled, the MAC flow control settings will be set * based on the flow control negotiated by the PHY. In TBI mode, the TFCE - * and RFCE bits will be automaticaly set to the negotiated flow control mode. - *****************************************************************************/ + * and RFCE bits will be automatically set to the negotiated flow control mode. + */ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) { - s32 ret_val; - u16 mii_status_reg; - u16 mii_nway_adv_reg; - u16 mii_nway_lp_ability_reg; - u16 speed; - u16 duplex; - - DEBUGFUNC("e1000_config_fc_after_link_up"); - - /* Check for the case where we have fiber media and auto-neg failed - * so we had to force link. In this case, we need to force the - * configuration of the MAC to match the "fc" parameter. - */ - if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) || - ((hw->media_type == e1000_media_type_internal_serdes) && - (hw->autoneg_failed)) || - ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) { - ret_val = e1000_force_mac_fc(hw); - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - } - - /* Check for the case where we have copper media and auto-neg is - * enabled. In this case, we need to check and see if Auto-Neg - * has completed, and if so, how the PHY and link partner has - * flow control configured. - */ - if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) { - /* Read the MII Status Register and check to see if AutoNeg - * has completed. We read this twice because this reg has - * some "sticky" (latched) bits. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { - /* The AutoNeg process has completed, so we now need to - * read both the Auto Negotiation Advertisement Register - * (Address 4) and the Auto_Negotiation Base Page Ability - * Register (Address 5) to determine how flow control was - * negotiated. - */ - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, - &mii_nway_adv_reg); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, - &mii_nway_lp_ability_reg); - if (ret_val) - return ret_val; - - /* Two bits in the Auto Negotiation Advertisement Register - * (Address 4) and two bits in the Auto Negotiation Base - * Page Ability Register (Address 5) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. - * NOTE: DC = Don't Care - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | E1000_FC_NONE - * 0 | 1 | 0 | DC | E1000_FC_NONE - * 0 | 1 | 1 | 0 | E1000_FC_NONE - * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE - * 1 | 0 | 0 | DC | E1000_FC_NONE - * 1 | DC | 1 | DC | E1000_FC_FULL - * 1 | 1 | 0 | 0 | E1000_FC_NONE - * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE - * - */ - /* Are both PAUSE bits set to 1? If so, this implies - * Symmetric Flow Control is enabled at both ends. The - * ASM_DIR bits are irrelevant per the spec. - * - * For Symmetric Flow Control: - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | E1000_FC_FULL - * - */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* Now we need to check if the user selected RX ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->original_fc == E1000_FC_FULL) { - hw->fc = E1000_FC_FULL; - DEBUGOUT("Flow Control = FULL.\n"); - } else { - hw->fc = E1000_FC_RX_PAUSE; - DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); - } - } - /* For receiving PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE - * - */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = E1000_FC_TX_PAUSE; - DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); - } - /* For transmitting PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE - * - */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = E1000_FC_RX_PAUSE; - DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); - } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. - */ - else if ((hw->original_fc == E1000_FC_NONE || - hw->original_fc == E1000_FC_TX_PAUSE) || - hw->fc_strict_ieee) { - hw->fc = E1000_FC_NONE; - DEBUGOUT("Flow Control = NONE.\n"); - } else { - hw->fc = E1000_FC_RX_PAUSE; - DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); - } - - /* Now we need to do one last check... If we auto- - * negotiated to HALF DUPLEX, flow control should not be - * enabled per IEEE 802.3 spec. - */ - ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - - if (duplex == HALF_DUPLEX) - hw->fc = E1000_FC_NONE; - - /* Now we call a subroutine to actually force the MAC - * controller to use the correct flow control settings. - */ - ret_val = e1000_force_mac_fc(hw); - if (ret_val) { - DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; - } - } else { - DEBUGOUT("Copper PHY and Auto Neg has not completed.\n"); - } - } - return E1000_SUCCESS; + s32 ret_val; + u16 mii_status_reg; + u16 mii_nway_adv_reg; + u16 mii_nway_lp_ability_reg; + u16 speed; + u16 duplex; + + DEBUGFUNC("e1000_config_fc_after_link_up"); + + /* Check for the case where we have fiber media and auto-neg failed + * so we had to force link. In this case, we need to force the + * configuration of the MAC to match the "fc" parameter. + */ + if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) + || ((hw->media_type == e1000_media_type_internal_serdes) + && (hw->autoneg_failed)) + || ((hw->media_type == e1000_media_type_copper) + && (!hw->autoneg))) { + ret_val = e1000_force_mac_fc(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + /* Check for the case where we have copper media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) { + /* Read the MII Status Register and check to see if AutoNeg + * has completed. We read this twice because this reg has + * some "sticky" (latched) bits. + */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement Register + * (Address 4) and the Auto_Negotiation Base Page Ability + * Register (Address 5) to determine how flow control was + * negotiated. + */ + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, + &mii_nway_adv_reg); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); + if (ret_val) + return ret_val; + + /* Two bits in the Auto Negotiation Advertisement Register + * (Address 4) and two bits in the Auto Negotiation Base + * Page Ability Register (Address 5) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | E1000_FC_NONE + * 0 | 1 | 0 | DC | E1000_FC_NONE + * 0 | 1 | 1 | 0 | E1000_FC_NONE + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * 1 | 0 | 0 | DC | E1000_FC_NONE + * 1 | DC | 1 | DC | E1000_FC_FULL + * 1 | 1 | 0 | 0 | E1000_FC_NONE + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE + * + */ + /* Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | E1000_FC_FULL + * + */ + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + /* Now we need to check if the user selected RX ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->original_fc == E1000_FC_FULL) { + hw->fc = E1000_FC_FULL; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc = E1000_FC_RX_PAUSE; + DEBUGOUT + ("Flow Control = RX PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * + */ + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) + { + hw->fc = E1000_FC_TX_PAUSE; + DEBUGOUT + ("Flow Control = TX PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE + * + */ + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) + { + hw->fc = E1000_FC_RX_PAUSE; + DEBUGOUT + ("Flow Control = RX PAUSE frames only.\n"); + } + /* Per the IEEE spec, at this point flow control should be + * disabled. However, we want to consider that we could + * be connected to a legacy switch that doesn't advertise + * desired flow control, but can be forced on the link + * partner. So if we advertised no flow control, that is + * what we will resolve to. If we advertised some kind of + * receive capability (Rx Pause Only or Full Flow Control) + * and the link partner advertised none, we will configure + * ourselves to enable Rx Flow Control only. We can do + * this safely for two reasons: If the link partner really + * didn't want flow control enabled, and we enable Rx, no + * harm done since we won't be receiving any PAUSE frames + * anyway. If the intent on the link partner was to have + * flow control enabled, then by us enabling RX only, we + * can at least receive pause frames and process them. + * This is a good idea because in most cases, since we are + * predominantly a server NIC, more times than not we will + * be asked to delay transmission of packets than asking + * our link partner to pause transmission of frames. + */ + else if ((hw->original_fc == E1000_FC_NONE || + hw->original_fc == E1000_FC_TX_PAUSE) || + hw->fc_strict_ieee) { + hw->fc = E1000_FC_NONE; + DEBUGOUT("Flow Control = NONE.\n"); + } else { + hw->fc = E1000_FC_RX_PAUSE; + DEBUGOUT + ("Flow Control = RX PAUSE frames only.\n"); + } + + /* Now we need to do one last check... If we auto- + * negotiated to HALF DUPLEX, flow control should not be + * enabled per IEEE 802.3 spec. + */ + ret_val = + e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT + ("Error getting link speed and duplex\n"); + return ret_val; + } + + if (duplex == HALF_DUPLEX) + hw->fc = E1000_FC_NONE; + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + ret_val = e1000_force_mac_fc(hw); + if (ret_val) { + DEBUGOUT + ("Error forcing flow control settings\n"); + return ret_val; + } + } else { + DEBUGOUT + ("Copper PHY and Auto Neg has not completed.\n"); + } + } + return E1000_SUCCESS; } -/****************************************************************************** - * Checks to see if the link status of the hardware has changed. +/** + * e1000_check_for_serdes_link_generic - Check for link (Serdes) + * @hw: pointer to the HW structure * - * hw - Struct containing variables accessed by shared code + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + */ +static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) +{ + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_check_for_serdes_link_generic"); + + ctrl = er32(CTRL); + status = er32(STATUS); + rxcw = er32(RXCW); + + /* + * If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), and our link partner is not trying to + * auto-negotiate with us (we are receiving idles or data), + * we need to force link up. We also need to give auto-negotiation + * time to complete. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) { + if (hw->autoneg_failed == 0) { + hw->autoneg_failed = 1; + goto out; + } + DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = er32(CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + ew32(CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + goto out; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* + * If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); + ew32(TXCW, hw->txcw); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); + + hw->serdes_has_link = true; + } else if (!(E1000_TXCW_ANE & er32(TXCW))) { + /* + * If we force link for non-auto-negotiation switch, check + * link status based on MAC synchronization for internal + * serdes media type. + */ + /* SYNCH bit and IV bit are sticky. */ + udelay(10); + rxcw = er32(RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + hw->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - forced.\n"); + } + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - force failed.\n"); + } + } + + if (E1000_TXCW_ANE & er32(TXCW)) { + status = er32(STATUS); + if (status & E1000_STATUS_LU) { + /* SYNCH bit and IV bit are sticky, so reread rxcw. */ + udelay(10); + rxcw = er32(RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + hw->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - autoneg " + "completed successfully.\n"); + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - invalid" + "codewords detected in autoneg.\n"); + } + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - no sync.\n"); + } + } else { + hw->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - autoneg failed\n"); + } + } + + out: + return ret_val; +} + +/** + * e1000_check_for_link + * @hw: Struct containing variables accessed by shared code * + * Checks to see if the link status of the hardware has changed. * Called by any function that needs to check the link status of the adapter. - *****************************************************************************/ + */ s32 e1000_check_for_link(struct e1000_hw *hw) { - u32 rxcw = 0; - u32 ctrl; - u32 status; - u32 rctl; - u32 icr; - u32 signal = 0; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_check_for_link"); - - ctrl = er32(CTRL); - status = er32(STATUS); - - /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be - * set when the optics detect a signal. On older adapters, it will be - * cleared when there is a signal. This applies to fiber media only. - */ - if ((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) { - rxcw = er32(RXCW); - - if (hw->media_type == e1000_media_type_fiber) { - signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; - if (status & E1000_STATUS_LU) - hw->get_link_status = false; - } - } - - /* If we have a copper PHY then we only want to go out to the PHY - * registers to see if Auto-Neg has completed and/or if our link - * status has changed. The get_link_status flag will be set if we - * receive a Link Status Change interrupt or we have Rx Sequence - * Errors. - */ - if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) { - /* First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex - * of the PHY. - * Read the register twice since the link bit is sticky. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if (phy_data & MII_SR_LINK_STATUS) { - hw->get_link_status = false; - /* Check if there was DownShift, must be checked immediately after - * link-up */ - e1000_check_downshift(hw); - - /* If we are on 82544 or 82543 silicon and speed/duplex - * are forced to 10H or 10F, then we will implement the polarity - * reversal workaround. We disable interrupts first, and upon - * returning, place the devices interrupt state to its previous - * value except for the link status change interrupt which will - * happen due to the execution of this workaround. - */ - - if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && - (!hw->autoneg) && - (hw->forced_speed_duplex == e1000_10_full || - hw->forced_speed_duplex == e1000_10_half)) { - ew32(IMC, 0xffffffff); - ret_val = e1000_polarity_reversal_workaround(hw); - icr = er32(ICR); - ew32(ICS, (icr & ~E1000_ICS_LSC)); - ew32(IMS, IMS_ENABLE_MASK); - } - - } else { - /* No link detected */ - e1000_config_dsp_after_link_change(hw, false); - return 0; - } - - /* If we are forcing speed/duplex, then we simply return since - * we have already determined whether we have link or not. - */ - if (!hw->autoneg) return -E1000_ERR_CONFIG; - - /* optimize the dsp settings for the igp phy */ - e1000_config_dsp_after_link_change(hw, true); - - /* We have a M88E1000 PHY and Auto-Neg is enabled. If we - * have Si on board that is 82544 or newer, Auto - * Speed Detection takes care of MAC speed/duplex - * configuration. So we only need to configure Collision - * Distance in the MAC. Otherwise, we need to force - * speed/duplex on the MAC to the current PHY speed/duplex - * settings. - */ - if (hw->mac_type >= e1000_82544) - e1000_config_collision_dist(hw); - else { - ret_val = e1000_config_mac_to_phy(hw); - if (ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - - /* Configure Flow Control now that Auto-Neg has completed. First, we - * need to restore the desired flow control settings because we may - * have had to re-autoneg with a different link partner. - */ - ret_val = e1000_config_fc_after_link_up(hw); - if (ret_val) { - DEBUGOUT("Error configuring flow control\n"); - return ret_val; - } - - /* At this point we know that we are on copper and we have - * auto-negotiated link. These are conditions for checking the link - * partner capability register. We use the link speed to determine if - * TBI compatibility needs to be turned on or off. If the link is not - * at gigabit speed, then TBI compatibility is not needed. If we are - * at gigabit speed, we turn on TBI compatibility. - */ - if (hw->tbi_compatibility_en) { - u16 speed, duplex; - ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - if (speed != SPEED_1000) { - /* If link speed is not set to gigabit speed, we do not need - * to enable TBI compatibility. - */ - if (hw->tbi_compatibility_on) { - /* If we previously were in the mode, turn it off. */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_SBP; - ew32(RCTL, rctl); - hw->tbi_compatibility_on = false; - } - } else { - /* If TBI compatibility is was previously off, turn it on. For - * compatibility with a TBI link partner, we will store bad - * packets. Some frames have an additional byte on the end and - * will look like CRC errors to the hardware. - */ - if (!hw->tbi_compatibility_on) { - hw->tbi_compatibility_on = true; - rctl = er32(RCTL); - rctl |= E1000_RCTL_SBP; - ew32(RCTL, rctl); - } - } - } - } - /* If we don't have link (auto-negotiation failed or link partner cannot - * auto-negotiate), the cable is plugged in (we have signal), and our - * link partner is not trying to auto-negotiate with us (we are receiving - * idles or data), we need to force link up. We also need to give - * auto-negotiation time to complete, in case the cable was just plugged - * in. The autoneg_failed flag does this. - */ - else if ((((hw->media_type == e1000_media_type_fiber) && - ((ctrl & E1000_CTRL_SWDPIN1) == signal)) || - (hw->media_type == e1000_media_type_internal_serdes)) && - (!(status & E1000_STATUS_LU)) && - (!(rxcw & E1000_RXCW_C))) { - if (hw->autoneg_failed == 0) { - hw->autoneg_failed = 1; - return 0; - } - DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n"); - - /* Disable auto-negotiation in the TXCW register */ - ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE)); - - /* Force link-up and also force full-duplex. */ - ctrl = er32(CTRL); - ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - ew32(CTRL, ctrl); - - /* Configure Flow Control after forcing link up. */ - ret_val = e1000_config_fc_after_link_up(hw); - if (ret_val) { - DEBUGOUT("Error configuring flow control\n"); - return ret_val; - } - } - /* If we are forcing link and we are receiving /C/ ordered sets, re-enable - * auto-negotiation in the TXCW register and disable forced link in the - * Device Control register in an attempt to auto-negotiate with our link - * partner. - */ - else if (((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) && - (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); - ew32(TXCW, hw->txcw); - ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); - - hw->serdes_link_down = false; - } - /* If we force link for non-auto-negotiation switch, check link status - * based on MAC synchronization for internal serdes media type. - */ - else if ((hw->media_type == e1000_media_type_internal_serdes) && - !(E1000_TXCW_ANE & er32(TXCW))) { - /* SYNCH bit and IV bit are sticky. */ - udelay(10); - if (E1000_RXCW_SYNCH & er32(RXCW)) { - if (!(rxcw & E1000_RXCW_IV)) { - hw->serdes_link_down = false; - DEBUGOUT("SERDES: Link is up.\n"); - } - } else { - hw->serdes_link_down = true; - DEBUGOUT("SERDES: Link is down.\n"); - } - } - if ((hw->media_type == e1000_media_type_internal_serdes) && - (E1000_TXCW_ANE & er32(TXCW))) { - hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS)); - } - return E1000_SUCCESS; + u32 rxcw = 0; + u32 ctrl; + u32 status; + u32 rctl; + u32 icr; + u32 signal = 0; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_check_for_link"); + + ctrl = er32(CTRL); + status = er32(STATUS); + + /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be + * set when the optics detect a signal. On older adapters, it will be + * cleared when there is a signal. This applies to fiber media only. + */ + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) { + rxcw = er32(RXCW); + + if (hw->media_type == e1000_media_type_fiber) { + signal = + (hw->mac_type > + e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; + if (status & E1000_STATUS_LU) + hw->get_link_status = false; + } + } + + /* If we have a copper PHY then we only want to go out to the PHY + * registers to see if Auto-Neg has completed and/or if our link + * status has changed. The get_link_status flag will be set if we + * receive a Link Status Change interrupt or we have Rx Sequence + * Errors. + */ + if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) { + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + * Read the register twice since the link bit is sticky. + */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & MII_SR_LINK_STATUS) { + hw->get_link_status = false; + /* Check if there was DownShift, must be checked immediately after + * link-up */ + e1000_check_downshift(hw); + + /* If we are on 82544 or 82543 silicon and speed/duplex + * are forced to 10H or 10F, then we will implement the polarity + * reversal workaround. We disable interrupts first, and upon + * returning, place the devices interrupt state to its previous + * value except for the link status change interrupt which will + * happen due to the execution of this workaround. + */ + + if ((hw->mac_type == e1000_82544 + || hw->mac_type == e1000_82543) && (!hw->autoneg) + && (hw->forced_speed_duplex == e1000_10_full + || hw->forced_speed_duplex == e1000_10_half)) { + ew32(IMC, 0xffffffff); + ret_val = + e1000_polarity_reversal_workaround(hw); + icr = er32(ICR); + ew32(ICS, (icr & ~E1000_ICS_LSC)); + ew32(IMS, IMS_ENABLE_MASK); + } + + } else { + /* No link detected */ + e1000_config_dsp_after_link_change(hw, false); + return 0; + } + + /* If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!hw->autoneg) + return -E1000_ERR_CONFIG; + + /* optimize the dsp settings for the igp phy */ + e1000_config_dsp_after_link_change(hw, true); + + /* We have a M88E1000 PHY and Auto-Neg is enabled. If we + * have Si on board that is 82544 or newer, Auto + * Speed Detection takes care of MAC speed/duplex + * configuration. So we only need to configure Collision + * Distance in the MAC. Otherwise, we need to force + * speed/duplex on the MAC to the current PHY speed/duplex + * settings. + */ + if (hw->mac_type >= e1000_82544) + e1000_config_collision_dist(hw); + else { + ret_val = e1000_config_mac_to_phy(hw); + if (ret_val) { + DEBUGOUT + ("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + + /* Configure Flow Control now that Auto-Neg has completed. First, we + * need to restore the desired flow control settings because we may + * have had to re-autoneg with a different link partner. + */ + ret_val = e1000_config_fc_after_link_up(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + + /* At this point we know that we are on copper and we have + * auto-negotiated link. These are conditions for checking the link + * partner capability register. We use the link speed to determine if + * TBI compatibility needs to be turned on or off. If the link is not + * at gigabit speed, then TBI compatibility is not needed. If we are + * at gigabit speed, we turn on TBI compatibility. + */ + if (hw->tbi_compatibility_en) { + u16 speed, duplex; + ret_val = + e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT + ("Error getting link speed and duplex\n"); + return ret_val; + } + if (speed != SPEED_1000) { + /* If link speed is not set to gigabit speed, we do not need + * to enable TBI compatibility. + */ + if (hw->tbi_compatibility_on) { + /* If we previously were in the mode, turn it off. */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_SBP; + ew32(RCTL, rctl); + hw->tbi_compatibility_on = false; + } + } else { + /* If TBI compatibility is was previously off, turn it on. For + * compatibility with a TBI link partner, we will store bad + * packets. Some frames have an additional byte on the end and + * will look like CRC errors to to the hardware. + */ + if (!hw->tbi_compatibility_on) { + hw->tbi_compatibility_on = true; + rctl = er32(RCTL); + rctl |= E1000_RCTL_SBP; + ew32(RCTL, rctl); + } + } + } + } + + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) + e1000_check_for_serdes_link_generic(hw); + + return E1000_SUCCESS; } -/****************************************************************************** +/** + * e1000_get_speed_and_duplex + * @hw: Struct containing variables accessed by shared code + * @speed: Speed of the connection + * @duplex: Duplex setting of the connection + * Detects the current speed and duplex settings of the hardware. - * - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - *****************************************************************************/ + */ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) { - u32 status; - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_get_speed_and_duplex"); - - if (hw->mac_type >= e1000_82543) { - status = er32(STATUS); - if (status & E1000_STATUS_SPEED_1000) { - *speed = SPEED_1000; - DEBUGOUT("1000 Mbs, "); - } else if (status & E1000_STATUS_SPEED_100) { - *speed = SPEED_100; - DEBUGOUT("100 Mbs, "); - } else { - *speed = SPEED_10; - DEBUGOUT("10 Mbs, "); - } - - if (status & E1000_STATUS_FD) { - *duplex = FULL_DUPLEX; - DEBUGOUT("Full Duplex\n"); - } else { - *duplex = HALF_DUPLEX; - DEBUGOUT(" Half Duplex\n"); - } - } else { - DEBUGOUT("1000 Mbs, Full Duplex\n"); - *speed = SPEED_1000; - *duplex = FULL_DUPLEX; - } - - /* IGP01 PHY may advertise full duplex operation after speed downgrade even - * if it is operating at half duplex. Here we set the duplex settings to - * match the duplex in the link partner's capabilities. - */ - if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); - if (ret_val) - return ret_val; - - if (!(phy_data & NWAY_ER_LP_NWAY_CAPS)) - *duplex = HALF_DUPLEX; - else { - ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data); - if (ret_val) - return ret_val; - if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) || - (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS))) - *duplex = HALF_DUPLEX; - } - } - - if ((hw->mac_type == e1000_80003es2lan) && - (hw->media_type == e1000_media_type_copper)) { - if (*speed == SPEED_1000) - ret_val = e1000_configure_kmrn_for_1000(hw); - else - ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex); - if (ret_val) - return ret_val; - } - - if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { - ret_val = e1000_kumeran_lock_loss_workaround(hw); - if (ret_val) - return ret_val; - } - - return E1000_SUCCESS; + u32 status; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_get_speed_and_duplex"); + + if (hw->mac_type >= e1000_82543) { + status = er32(STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + DEBUGOUT("1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + DEBUGOUT("100 Mbs, "); + } else { + *speed = SPEED_10; + DEBUGOUT("10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + DEBUGOUT(" Half Duplex\n"); + } + } else { + DEBUGOUT("1000 Mbs, Full Duplex\n"); + *speed = SPEED_1000; + *duplex = FULL_DUPLEX; + } + + /* IGP01 PHY may advertise full duplex operation after speed downgrade even + * if it is operating at half duplex. Here we set the duplex settings to + * match the duplex in the link partner's capabilities. + */ + if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & NWAY_ER_LP_NWAY_CAPS)) + *duplex = HALF_DUPLEX; + else { + ret_val = + e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data); + if (ret_val) + return ret_val; + if ((*speed == SPEED_100 + && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) + || (*speed == SPEED_10 + && !(phy_data & NWAY_LPAR_10T_FD_CAPS))) + *duplex = HALF_DUPLEX; + } + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Blocks until autoneg completes or times out (~4.5 seconds) -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_wait_autoneg + * @hw: Struct containing variables accessed by shared code + * + * Blocks until autoneg completes or times out (~4.5 seconds) + */ static s32 e1000_wait_autoneg(struct e1000_hw *hw) { - s32 ret_val; - u16 i; - u16 phy_data; - - DEBUGFUNC("e1000_wait_autoneg"); - DEBUGOUT("Waiting for Auto-Neg to complete.\n"); - - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ - for (i = PHY_AUTO_NEG_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Auto-Neg - * Complete bit to be set. - */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - if (phy_data & MII_SR_AUTONEG_COMPLETE) { - return E1000_SUCCESS; - } - msleep(100); - } - return E1000_SUCCESS; + s32 ret_val; + u16 i; + u16 phy_data; + + DEBUGFUNC("e1000_wait_autoneg"); + DEBUGOUT("Waiting for Auto-Neg to complete.\n"); + + /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + for (i = PHY_AUTO_NEG_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Auto-Neg + * Complete bit to be set. + */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + if (phy_data & MII_SR_AUTONEG_COMPLETE) { + return E1000_SUCCESS; + } + msleep(100); + } + return E1000_SUCCESS; } -/****************************************************************************** -* Raises the Management Data Clock -* -* hw - Struct containing variables accessed by shared code -* ctrl - Device control register's current value -******************************************************************************/ +/** + * e1000_raise_mdi_clk - Raises the Management Data Clock + * @hw: Struct containing variables accessed by shared code + * @ctrl: Device control register's current value + */ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Raise the clock input to the Management Data Clock (by setting the MDC - * bit), and then delay 10 microseconds. - */ - ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(); - udelay(10); + /* Raise the clock input to the Management Data Clock (by setting the MDC + * bit), and then delay 10 microseconds. + */ + ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); + udelay(10); } -/****************************************************************************** -* Lowers the Management Data Clock -* -* hw - Struct containing variables accessed by shared code -* ctrl - Device control register's current value -******************************************************************************/ +/** + * e1000_lower_mdi_clk - Lowers the Management Data Clock + * @hw: Struct containing variables accessed by shared code + * @ctrl: Device control register's current value + */ static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Lower the clock input to the Management Data Clock (by clearing the MDC - * bit), and then delay 10 microseconds. - */ - ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(); - udelay(10); + /* Lower the clock input to the Management Data Clock (by clearing the MDC + * bit), and then delay 10 microseconds. + */ + ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); + udelay(10); } -/****************************************************************************** -* Shifts data bits out to the PHY -* -* hw - Struct containing variables accessed by shared code -* data - Data to send out to the PHY -* count - Number of bits to shift out -* -* Bits are shifted out in MSB to LSB order. -******************************************************************************/ +/** + * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY + * @hw: Struct containing variables accessed by shared code + * @data: Data to send out to the PHY + * @count: Number of bits to shift out + * + * Bits are shifted out in MSB to LSB order. + */ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) { - u32 ctrl; - u32 mask; - - /* We need to shift "count" number of bits out to the PHY. So, the value - * in the "data" parameter will be shifted out to the PHY one bit at a - * time. In order to do this, "data" must be broken down into bits. - */ - mask = 0x01; - mask <<= (count - 1); - - ctrl = er32(CTRL); - - /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ - ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); - - while (mask) { - /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and - * then raising and lowering the Management Data Clock. A "0" is - * shifted out to the PHY by setting the MDIO bit to "0" and then - * raising and lowering the clock. - */ - if (data & mask) - ctrl |= E1000_CTRL_MDIO; - else - ctrl &= ~E1000_CTRL_MDIO; - - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - udelay(10); - - e1000_raise_mdi_clk(hw, &ctrl); - e1000_lower_mdi_clk(hw, &ctrl); - - mask = mask >> 1; - } -} - -/****************************************************************************** -* Shifts data bits in from the PHY -* -* hw - Struct containing variables accessed by shared code -* -* Bits are shifted in in MSB to LSB order. -******************************************************************************/ -static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) -{ - u32 ctrl; - u16 data = 0; - u8 i; - - /* In order to read a register from the PHY, we need to shift in a total - * of 18 bits from the PHY. The first two bit (turnaround) times are used - * to avoid contention on the MDIO pin when a read operation is performed. - * These two bits are ignored by us and thrown away. Bits are "shifted in" - * by raising the input to the Management Data Clock (setting the MDC bit), - * and then reading the value of the MDIO bit. - */ - ctrl = er32(CTRL); - - /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ - ctrl &= ~E1000_CTRL_MDIO_DIR; - ctrl &= ~E1000_CTRL_MDIO; - - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - /* Raise and Lower the clock before reading in the data. This accounts for - * the turnaround bits. The first clock occurred when we clocked out the - * last bit of the Register Address. - */ - e1000_raise_mdi_clk(hw, &ctrl); - e1000_lower_mdi_clk(hw, &ctrl); - - for (data = 0, i = 0; i < 16; i++) { - data = data << 1; - e1000_raise_mdi_clk(hw, &ctrl); - ctrl = er32(CTRL); - /* Check to see if we shifted in a "1". */ - if (ctrl & E1000_CTRL_MDIO) - data |= 1; - e1000_lower_mdi_clk(hw, &ctrl); - } - - e1000_raise_mdi_clk(hw, &ctrl); - e1000_lower_mdi_clk(hw, &ctrl); - - return data; -} - -static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync = 0; - u32 swmask = mask; - u32 fwmask = mask << 16; - s32 timeout = 200; + u32 ctrl; + u32 mask; - DEBUGFUNC("e1000_swfw_sync_acquire"); - - if (hw->swfwhw_semaphore_present) - return e1000_get_software_flag(hw); + /* We need to shift "count" number of bits out to the PHY. So, the value + * in the "data" parameter will be shifted out to the PHY one bit at a + * time. In order to do this, "data" must be broken down into bits. + */ + mask = 0x01; + mask <<= (count - 1); - if (!hw->swfw_sync_present) - return e1000_get_hw_eeprom_semaphore(hw); + ctrl = er32(CTRL); - while (timeout) { - if (e1000_get_hw_eeprom_semaphore(hw)) - return -E1000_ERR_SWFW_SYNC; + /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ + ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); - swfw_sync = er32(SW_FW_SYNC); - if (!(swfw_sync & (fwmask | swmask))) { - break; - } + while (mask) { + /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and + * then raising and lowering the Management Data Clock. A "0" is + * shifted out to the PHY by setting the MDIO bit to "0" and then + * raising and lowering the clock. + */ + if (data & mask) + ctrl |= E1000_CTRL_MDIO; + else + ctrl &= ~E1000_CTRL_MDIO; - /* firmware currently using resource (fwmask) */ - /* or other software thread currently using resource (swmask) */ - e1000_put_hw_eeprom_semaphore(hw); - mdelay(5); - timeout--; - } + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); - if (!timeout) { - DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); - return -E1000_ERR_SWFW_SYNC; - } + udelay(10); - swfw_sync |= swmask; - ew32(SW_FW_SYNC, swfw_sync); + e1000_raise_mdi_clk(hw, &ctrl); + e1000_lower_mdi_clk(hw, &ctrl); - e1000_put_hw_eeprom_semaphore(hw); - return E1000_SUCCESS; + mask = mask >> 1; + } } -static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask) +/** + * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY + * @hw: Struct containing variables accessed by shared code + * + * Bits are shifted in in MSB to LSB order. + */ +static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) { - u32 swfw_sync; - u32 swmask = mask; + u32 ctrl; + u16 data = 0; + u8 i; - DEBUGFUNC("e1000_swfw_sync_release"); + /* In order to read a register from the PHY, we need to shift in a total + * of 18 bits from the PHY. The first two bit (turnaround) times are used + * to avoid contention on the MDIO pin when a read operation is performed. + * These two bits are ignored by us and thrown away. Bits are "shifted in" + * by raising the input to the Management Data Clock (setting the MDC bit), + * and then reading the value of the MDIO bit. + */ + ctrl = er32(CTRL); - if (hw->swfwhw_semaphore_present) { - e1000_release_software_flag(hw); - return; - } + /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ + ctrl &= ~E1000_CTRL_MDIO_DIR; + ctrl &= ~E1000_CTRL_MDIO; - if (!hw->swfw_sync_present) { - e1000_put_hw_eeprom_semaphore(hw); - return; - } + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); - /* if (e1000_get_hw_eeprom_semaphore(hw)) - * return -E1000_ERR_SWFW_SYNC; */ - while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS); - /* empty */ + /* Raise and Lower the clock before reading in the data. This accounts for + * the turnaround bits. The first clock occurred when we clocked out the + * last bit of the Register Address. + */ + e1000_raise_mdi_clk(hw, &ctrl); + e1000_lower_mdi_clk(hw, &ctrl); + + for (data = 0, i = 0; i < 16; i++) { + data = data << 1; + e1000_raise_mdi_clk(hw, &ctrl); + ctrl = er32(CTRL); + /* Check to see if we shifted in a "1". */ + if (ctrl & E1000_CTRL_MDIO) + data |= 1; + e1000_lower_mdi_clk(hw, &ctrl); + } - swfw_sync = er32(SW_FW_SYNC); - swfw_sync &= ~swmask; - ew32(SW_FW_SYNC, swfw_sync); + e1000_raise_mdi_clk(hw, &ctrl); + e1000_lower_mdi_clk(hw, &ctrl); - e1000_put_hw_eeprom_semaphore(hw); + return data; } -/***************************************************************************** -* Reads the value from a PHY register, if the value is on a specific non zero -* page, sets the page first. -* hw - Struct containing variables accessed by shared code -* reg_addr - address of the PHY register to read -******************************************************************************/ + +/** + * e1000_read_phy_reg - read a phy register + * @hw: Struct containing variables accessed by shared code + * @reg_addr: address of the PHY register to read + * + * Reads the value from a PHY register, if the value is on a specific non zero + * page, sets the page first. + */ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) { - u32 ret_val; - u16 swfw; - - DEBUGFUNC("e1000_read_phy_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - if ((hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) && - (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { - ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, - (u16)reg_addr); - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) || - (hw->mac_type == e1000_80003es2lan)) { - /* Select Configuration Page */ - if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) { - ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } else { - /* Use Alternative Page Select register to access - * registers 30 and 31 - */ - ret_val = e1000_write_phy_reg_ex(hw, - GG82563_PHY_PAGE_SELECT_ALT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } - - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } - } - - ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, - phy_data); - - e1000_swfw_sync_release(hw, swfw); - return ret_val; + u32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg"); + + if ((hw->phy_type == e1000_phy_igp) && + (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { + ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, + (u16) reg_addr); + if (ret_val) + return ret_val; + } + + ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, + phy_data); + + return ret_val; } static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) { - u32 i; - u32 mdic = 0; - const u32 phy_addr = 1; - - DEBUGFUNC("e1000_read_phy_reg_ex"); - - if (reg_addr > MAX_PHY_REG_ADDRESS) { - DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); - return -E1000_ERR_PARAM; - } - - if (hw->mac_type > e1000_82543) { - /* Set up Op-code, Phy Address, and register address in the MDI - * Control register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | - (phy_addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); - - ew32(MDIC, mdic); - - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < 64; i++) { - udelay(50); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) break; - } - if (!(mdic & E1000_MDIC_READY)) { - DEBUGOUT("MDI Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - DEBUGOUT("MDI Error\n"); - return -E1000_ERR_PHY; - } - *phy_data = (u16)mdic; - } else { - /* We must first send a preamble through the MDIO pin to signal the - * beginning of an MII instruction. This is done by sending 32 - * consecutive "1" bits. - */ - e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); - - /* Now combine the next few fields that are required for a read - * operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine five different times. The format of - * a MII read instruction consists of a shift out of 14 bits and is - * defined as follows: - * <Preamble><SOF><Op Code><Phy Addr><Reg Addr> - * followed by a shift in of 18 bits. This first two bits shifted in - * are TurnAround bits used to avoid contention on the MDIO pin when a - * READ operation is performed. These two bits are thrown away - * followed by a shift in of 16 bits which contains the desired data. - */ - mdic = ((reg_addr) | (phy_addr << 5) | - (PHY_OP_READ << 10) | (PHY_SOF << 12)); - - e1000_shift_out_mdi_bits(hw, mdic, 14); - - /* Now that we've shifted out the read command to the MII, we need to - * "shift in" the 16-bit value (18 total bits) of the requested PHY - * register address. - */ - *phy_data = e1000_shift_in_mdi_bits(hw); - } - return E1000_SUCCESS; + u32 i; + u32 mdic = 0; + const u32 phy_addr = 1; + + DEBUGFUNC("e1000_read_phy_reg_ex"); + + if (reg_addr > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); + return -E1000_ERR_PARAM; + } + + if (hw->mac_type > e1000_82543) { + /* Set up Op-code, Phy Address, and register address in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + ew32(MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < 64; i++) { + udelay(50); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + *phy_data = (u16) mdic; + } else { + /* We must first send a preamble through the MDIO pin to signal the + * beginning of an MII instruction. This is done by sending 32 + * consecutive "1" bits. + */ + e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); + + /* Now combine the next few fields that are required for a read + * operation. We use this method instead of calling the + * e1000_shift_out_mdi_bits routine five different times. The format of + * a MII read instruction consists of a shift out of 14 bits and is + * defined as follows: + * <Preamble><SOF><Op Code><Phy Addr><Reg Addr> + * followed by a shift in of 18 bits. This first two bits shifted in + * are TurnAround bits used to avoid contention on the MDIO pin when a + * READ operation is performed. These two bits are thrown away + * followed by a shift in of 16 bits which contains the desired data. + */ + mdic = ((reg_addr) | (phy_addr << 5) | + (PHY_OP_READ << 10) | (PHY_SOF << 12)); + + e1000_shift_out_mdi_bits(hw, mdic, 14); + + /* Now that we've shifted out the read command to the MII, we need to + * "shift in" the 16-bit value (18 total bits) of the requested PHY + * register address. + */ + *phy_data = e1000_shift_in_mdi_bits(hw); + } + return E1000_SUCCESS; } -/****************************************************************************** -* Writes a value to a PHY register -* -* hw - Struct containing variables accessed by shared code -* reg_addr - address of the PHY register to write -* data - data to write to the PHY -******************************************************************************/ +/** + * e1000_write_phy_reg - write a phy register + * + * @hw: Struct containing variables accessed by shared code + * @reg_addr: address of the PHY register to write + * @data: data to write to the PHY + + * Writes a value to a PHY register + */ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) { - u32 ret_val; - u16 swfw; - - DEBUGFUNC("e1000_write_phy_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - if ((hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) && - (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { - ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, - (u16)reg_addr); - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) || - (hw->mac_type == e1000_80003es2lan)) { - /* Select Configuration Page */ - if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) { - ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } else { - /* Use Alternative Page Select register to access - * registers 30 and 31 - */ - ret_val = e1000_write_phy_reg_ex(hw, - GG82563_PHY_PAGE_SELECT_ALT, - (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT)); - } - - if (ret_val) { - e1000_swfw_sync_release(hw, swfw); - return ret_val; - } - } - } - - ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, - phy_data); - - e1000_swfw_sync_release(hw, swfw); - return ret_val; + u32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg"); + + if ((hw->phy_type == e1000_phy_igp) && + (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { + ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, + (u16) reg_addr); + if (ret_val) + return ret_val; + } + + ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, + phy_data); + + return ret_val; } static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) { - u32 i; - u32 mdic = 0; - const u32 phy_addr = 1; - - DEBUGFUNC("e1000_write_phy_reg_ex"); - - if (reg_addr > MAX_PHY_REG_ADDRESS) { - DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); - return -E1000_ERR_PARAM; - } - - if (hw->mac_type > e1000_82543) { - /* Set up Op-code, Phy Address, register address, and data intended - * for the PHY register in the MDI Control register. The MAC will take - * care of interfacing with the PHY to send the desired data. - */ - mdic = (((u32)phy_data) | - (reg_addr << E1000_MDIC_REG_SHIFT) | - (phy_addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); - - ew32(MDIC, mdic); - - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < 641; i++) { - udelay(5); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) break; - } - if (!(mdic & E1000_MDIC_READY)) { - DEBUGOUT("MDI Write did not complete\n"); - return -E1000_ERR_PHY; - } - } else { - /* We'll need to use the SW defined pins to shift the write command - * out to the PHY. We first send a preamble to the PHY to signal the - * beginning of the MII instruction. This is done by sending 32 - * consecutive "1" bits. - */ - e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); - - /* Now combine the remaining required fields that will indicate a - * write operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine for each field in the command. The - * format of a MII write instruction is as follows: - * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>. - */ - mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | - (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); - mdic <<= 16; - mdic |= (u32)phy_data; - - e1000_shift_out_mdi_bits(hw, mdic, 32); - } - - return E1000_SUCCESS; -} + u32 i; + u32 mdic = 0; + const u32 phy_addr = 1; -static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data) -{ - u32 reg_val; - u16 swfw; - DEBUGFUNC("e1000_read_kmrn_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - /* Write register address */ - reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & - E1000_KUMCTRLSTA_OFFSET) | - E1000_KUMCTRLSTA_REN; - ew32(KUMCTRLSTA, reg_val); - udelay(2); - - /* Read the data returned */ - reg_val = er32(KUMCTRLSTA); - *data = (u16)reg_val; - - e1000_swfw_sync_release(hw, swfw); - return E1000_SUCCESS; -} + DEBUGFUNC("e1000_write_phy_reg_ex"); -static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data) -{ - u32 reg_val; - u16 swfw; - DEBUGFUNC("e1000_write_kmrn_reg"); - - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) - return -E1000_ERR_SWFW_SYNC; - - reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & - E1000_KUMCTRLSTA_OFFSET) | data; - ew32(KUMCTRLSTA, reg_val); - udelay(2); - - e1000_swfw_sync_release(hw, swfw); - return E1000_SUCCESS; + if (reg_addr > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); + return -E1000_ERR_PARAM; + } + + if (hw->mac_type > e1000_82543) { + /* Set up Op-code, Phy Address, register address, and data intended + * for the PHY register in the MDI Control register. The MAC will take + * care of interfacing with the PHY to send the desired data. + */ + mdic = (((u32) phy_data) | + (reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + ew32(MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < 641; i++) { + udelay(5); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } + } else { + /* We'll need to use the SW defined pins to shift the write command + * out to the PHY. We first send a preamble to the PHY to signal the + * beginning of the MII instruction. This is done by sending 32 + * consecutive "1" bits. + */ + e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); + + /* Now combine the remaining required fields that will indicate a + * write operation. We use this method instead of calling the + * e1000_shift_out_mdi_bits routine for each field in the command. The + * format of a MII write instruction is as follows: + * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>. + */ + mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | + (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); + mdic <<= 16; + mdic |= (u32) phy_data; + + e1000_shift_out_mdi_bits(hw, mdic, 32); + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Returns the PHY to the power-on reset state -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_phy_hw_reset - reset the phy, hardware style + * @hw: Struct containing variables accessed by shared code + * + * Returns the PHY to the power-on reset state + */ s32 e1000_phy_hw_reset(struct e1000_hw *hw) { - u32 ctrl, ctrl_ext; - u32 led_ctrl; - s32 ret_val; - u16 swfw; - - DEBUGFUNC("e1000_phy_hw_reset"); - - /* In the case of the phy reset being blocked, it's not an error, we - * simply return success without performing the reset. */ - ret_val = e1000_check_phy_reset_block(hw); - if (ret_val) - return E1000_SUCCESS; - - DEBUGOUT("Resetting Phy...\n"); - - if (hw->mac_type > e1000_82543) { - if ((hw->mac_type == e1000_80003es2lan) && - (er32(STATUS) & E1000_STATUS_FUNC_1)) { - swfw = E1000_SWFW_PHY1_SM; - } else { - swfw = E1000_SWFW_PHY0_SM; - } - if (e1000_swfw_sync_acquire(hw, swfw)) { - DEBUGOUT("Unable to acquire swfw sync\n"); - return -E1000_ERR_SWFW_SYNC; - } - /* Read the device control register and assert the E1000_CTRL_PHY_RST - * bit. Then, take it out of reset. - * For pre-e1000_82571 hardware, we delay for 10ms between the assert - * and deassert. For e1000_82571 hardware and later, we instead delay - * for 50us between and 10ms after the deassertion. - */ - ctrl = er32(CTRL); - ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); - E1000_WRITE_FLUSH(); - - if (hw->mac_type < e1000_82571) - msleep(10); - else - udelay(100); - - ew32(CTRL, ctrl); - E1000_WRITE_FLUSH(); - - if (hw->mac_type >= e1000_82571) - mdelay(10); - - e1000_swfw_sync_release(hw, swfw); - } else { - /* Read the Extended Device Control Register, assert the PHY_RESET_DIR - * bit to put the PHY into reset. Then, take it out of reset. - */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; - ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - msleep(10); - ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA; - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - } - udelay(150); - - if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - /* Configure activity LED after PHY reset */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); - } - - /* Wait for FW to finish PHY configuration. */ - ret_val = e1000_get_phy_cfg_done(hw); - if (ret_val != E1000_SUCCESS) - return ret_val; - e1000_release_software_semaphore(hw); - - if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3)) - ret_val = e1000_init_lcd_from_nvm(hw); - - return ret_val; + u32 ctrl, ctrl_ext; + u32 led_ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_phy_hw_reset"); + + DEBUGOUT("Resetting Phy...\n"); + + if (hw->mac_type > e1000_82543) { + /* Read the device control register and assert the E1000_CTRL_PHY_RST + * bit. Then, take it out of reset. + * For e1000 hardware, we delay for 10ms between the assert + * and deassert. + */ + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); + E1000_WRITE_FLUSH(); + + msleep(10); + + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); + + } else { + /* Read the Extended Device Control Register, assert the PHY_RESET_DIR + * bit to put the PHY into reset. Then, take it out of reset. + */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; + ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA; + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); + msleep(10); + ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA; + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); + } + udelay(150); + + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + /* Configure activity LED after PHY reset */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + } + + /* Wait for FW to finish PHY configuration. */ + ret_val = e1000_get_phy_cfg_done(hw); + if (ret_val != E1000_SUCCESS) + return ret_val; + + return ret_val; } -/****************************************************************************** -* Resets the PHY -* -* hw - Struct containing variables accessed by shared code -* -* Sets bit 15 of the MII Control register -******************************************************************************/ +/** + * e1000_phy_reset - reset the phy to commit settings + * @hw: Struct containing variables accessed by shared code + * + * Resets the PHY + * Sets bit 15 of the MII Control register + */ s32 e1000_phy_reset(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_phy_reset"); - - /* In the case of the phy reset being blocked, it's not an error, we - * simply return success without performing the reset. */ - ret_val = e1000_check_phy_reset_block(hw); - if (ret_val) - return E1000_SUCCESS; - - switch (hw->phy_type) { - case e1000_phy_igp: - case e1000_phy_igp_2: - case e1000_phy_igp_3: - case e1000_phy_ife: - ret_val = e1000_phy_hw_reset(hw); - if (ret_val) - return ret_val; - break; - default: - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= MII_CR_RESET; - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - udelay(1); - break; - } - - if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) - e1000_phy_init_script(hw); - - return E1000_SUCCESS; -} + s32 ret_val; + u16 phy_data; -/****************************************************************************** -* Work-around for 82566 power-down: on D3 entry- -* 1) disable gigabit link -* 2) write VR power-down enable -* 3) read it back -* if successful continue, else issue LCD reset and repeat -* -* hw - struct containing variables accessed by shared code -******************************************************************************/ -void e1000_phy_powerdown_workaround(struct e1000_hw *hw) -{ - s32 reg; - u16 phy_data; - s32 retry = 0; + DEBUGFUNC("e1000_phy_reset"); - DEBUGFUNC("e1000_phy_powerdown_workaround"); + switch (hw->phy_type) { + case e1000_phy_igp: + ret_val = e1000_phy_hw_reset(hw); + if (ret_val) + return ret_val; + break; + default: + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if (ret_val) + return ret_val; - if (hw->phy_type != e1000_phy_igp_3) - return; + phy_data |= MII_CR_RESET; + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if (ret_val) + return ret_val; - do { - /* Disable link */ - reg = er32(PHY_CTRL); - ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | - E1000_PHY_CTRL_NOND0A_GBE_DISABLE); + udelay(1); + break; + } - /* Write VR power-down enable - bits 9:8 should be 10b */ - e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - phy_data |= (1 << 9); - phy_data &= ~(1 << 8); - e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data); + if (hw->phy_type == e1000_phy_igp) + e1000_phy_init_script(hw); - /* Read it back and test */ - e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry) - break; + return E1000_SUCCESS; +} - /* Issue PHY reset and repeat at most one more time */ - reg = er32(CTRL); - ew32(CTRL, reg | E1000_CTRL_PHY_RST); - retry++; - } while (retry); +/** + * e1000_detect_gig_phy - check the phy type + * @hw: Struct containing variables accessed by shared code + * + * Probes the expected PHY address for known PHY IDs + */ +static s32 e1000_detect_gig_phy(struct e1000_hw *hw) +{ + s32 phy_init_status, ret_val; + u16 phy_id_high, phy_id_low; + bool match = false; - return; + DEBUGFUNC("e1000_detect_gig_phy"); -} + if (hw->phy_id != 0) + return E1000_SUCCESS; -/****************************************************************************** -* Work-around for 82566 Kumeran PCS lock loss: -* On link status change (i.e. PCI reset, speed change) and link is up and -* speed is gigabit- -* 0) if workaround is optionally disabled do nothing -* 1) wait 1ms for Kumeran link to come up -* 2) check Kumeran Diagnostic register PCS lock loss bit -* 3) if not set the link is locked (all is good), otherwise... -* 4) reset the PHY -* 5) repeat up to 10 times -* Note: this is only called for IGP3 copper when speed is 1gb. -* -* hw - struct containing variables accessed by shared code -******************************************************************************/ -static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) -{ - s32 ret_val; - s32 reg; - s32 cnt; - u16 phy_data; - - if (hw->kmrn_lock_loss_workaround_disabled) - return E1000_SUCCESS; - - /* Make sure link is up before proceeding. If not just return. - * Attempting this while link is negotiating fouled up link - * stability */ - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - - if (phy_data & MII_SR_LINK_STATUS) { - for (cnt = 0; cnt < 10; cnt++) { - /* read once to clear */ - ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data); - if (ret_val) - return ret_val; - /* and again to get new status */ - ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data); - if (ret_val) - return ret_val; - - /* check for PCS lock */ - if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS)) - return E1000_SUCCESS; - - /* Issue PHY reset */ - e1000_phy_hw_reset(hw); - mdelay(5); - } - /* Disable GigE link negotiation */ - reg = er32(PHY_CTRL); - ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | - E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - - /* unable to acquire PCS lock */ - return E1000_ERR_PHY; - } - - return E1000_SUCCESS; -} + /* Read the PHY ID Registers to identify which PHY is onboard. */ + ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); + if (ret_val) + return ret_val; -/****************************************************************************** -* Probes the expected PHY address for known PHY IDs -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ -static s32 e1000_detect_gig_phy(struct e1000_hw *hw) -{ - s32 phy_init_status, ret_val; - u16 phy_id_high, phy_id_low; - bool match = false; - - DEBUGFUNC("e1000_detect_gig_phy"); - - if (hw->phy_id != 0) - return E1000_SUCCESS; - - /* The 82571 firmware may still be configuring the PHY. In this - * case, we cannot access the PHY until the configuration is done. So - * we explicitly set the PHY values. */ - if (hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572) { - hw->phy_id = IGP01E1000_I_PHY_ID; - hw->phy_type = e1000_phy_igp_2; - return E1000_SUCCESS; - } - - /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work- - * around that forces PHY page 0 to be set or the reads fail. The rest of - * the code in this routine uses e1000_read_phy_reg to read the PHY ID. - * So for ESB-2 we need to have this set so our reads won't fail. If the - * attached PHY is not a e1000_phy_gg82563, the routines below will figure - * this out as well. */ - if (hw->mac_type == e1000_80003es2lan) - hw->phy_type = e1000_phy_gg82563; - - /* Read the PHY ID Registers to identify which PHY is onboard. */ - ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); - if (ret_val) - return ret_val; - - hw->phy_id = (u32)(phy_id_high << 16); - udelay(20); - ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); - if (ret_val) - return ret_val; - - hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK); - hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK; - - switch (hw->mac_type) { - case e1000_82543: - if (hw->phy_id == M88E1000_E_PHY_ID) match = true; - break; - case e1000_82544: - if (hw->phy_id == M88E1000_I_PHY_ID) match = true; - break; - case e1000_82540: - case e1000_82545: - case e1000_82545_rev_3: - case e1000_82546: - case e1000_82546_rev_3: - if (hw->phy_id == M88E1011_I_PHY_ID) match = true; - break; - case e1000_82541: - case e1000_82541_rev_2: - case e1000_82547: - case e1000_82547_rev_2: - if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true; - break; - case e1000_82573: - if (hw->phy_id == M88E1111_I_PHY_ID) match = true; - break; - case e1000_80003es2lan: - if (hw->phy_id == GG82563_E_PHY_ID) match = true; - break; - case e1000_ich8lan: - if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true; - if (hw->phy_id == IFE_E_PHY_ID) match = true; - if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true; - if (hw->phy_id == IFE_C_E_PHY_ID) match = true; - break; - default: - DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); - return -E1000_ERR_CONFIG; - } - phy_init_status = e1000_set_phy_type(hw); - - if ((match) && (phy_init_status == E1000_SUCCESS)) { - DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id); - return E1000_SUCCESS; - } - DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id); - return -E1000_ERR_PHY; + hw->phy_id = (u32) (phy_id_high << 16); + udelay(20); + ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); + if (ret_val) + return ret_val; + + hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK); + hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK; + + switch (hw->mac_type) { + case e1000_82543: + if (hw->phy_id == M88E1000_E_PHY_ID) + match = true; + break; + case e1000_82544: + if (hw->phy_id == M88E1000_I_PHY_ID) + match = true; + break; + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + if (hw->phy_id == M88E1011_I_PHY_ID) + match = true; + break; + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + if (hw->phy_id == IGP01E1000_I_PHY_ID) + match = true; + break; + default: + DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); + return -E1000_ERR_CONFIG; + } + phy_init_status = e1000_set_phy_type(hw); + + if ((match) && (phy_init_status == E1000_SUCCESS)) { + DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id); + return E1000_SUCCESS; + } + DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id); + return -E1000_ERR_PHY; } -/****************************************************************************** -* Resets the PHY's DSP -* -* hw - Struct containing variables accessed by shared code -******************************************************************************/ +/** + * e1000_phy_reset_dsp - reset DSP + * @hw: Struct containing variables accessed by shared code + * + * Resets the PHY's DSP + */ static s32 e1000_phy_reset_dsp(struct e1000_hw *hw) { - s32 ret_val; - DEBUGFUNC("e1000_phy_reset_dsp"); - - do { - if (hw->phy_type != e1000_phy_gg82563) { - ret_val = e1000_write_phy_reg(hw, 29, 0x001d); - if (ret_val) break; - } - ret_val = e1000_write_phy_reg(hw, 30, 0x00c1); - if (ret_val) break; - ret_val = e1000_write_phy_reg(hw, 30, 0x0000); - if (ret_val) break; - ret_val = E1000_SUCCESS; - } while (0); - - return ret_val; + s32 ret_val; + DEBUGFUNC("e1000_phy_reset_dsp"); + + do { + ret_val = e1000_write_phy_reg(hw, 29, 0x001d); + if (ret_val) + break; + ret_val = e1000_write_phy_reg(hw, 30, 0x00c1); + if (ret_val) + break; + ret_val = e1000_write_phy_reg(hw, 30, 0x0000); + if (ret_val) + break; + ret_val = E1000_SUCCESS; + } while (0); + + return ret_val; } -/****************************************************************************** -* Get PHY information from various PHY registers for igp PHY only. -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ +/** + * e1000_phy_igp_get_info - get igp specific registers + * @hw: Struct containing variables accessed by shared code + * @phy_info: PHY information structure + * + * Get PHY information from various PHY registers for igp PHY only. + */ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { - s32 ret_val; - u16 phy_data, min_length, max_length, average; - e1000_rev_polarity polarity; - - DEBUGFUNC("e1000_phy_igp_get_info"); - - /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = (e1000_downshift)hw->speed_downgraded; - - /* IGP01E1000 does not need to support it. */ - phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; - - /* IGP01E1000 always correct polarity reversal */ - phy_info->polarity_correction = e1000_polarity_reversal_enabled; - - /* Check polarity status */ - ret_val = e1000_check_polarity(hw, &polarity); - if (ret_val) - return ret_val; - - phy_info->cable_polarity = polarity; - - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >> - IGP01E1000_PSSR_MDIX_SHIFT); - - if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) { - /* Local/Remote Receiver Information are only valid at 1000 Mbps */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - - /* Get cable length */ - ret_val = e1000_get_cable_length(hw, &min_length, &max_length); - if (ret_val) - return ret_val; - - /* Translate to old method */ - average = (max_length + min_length) / 2; - - if (average <= e1000_igp_cable_length_50) - phy_info->cable_length = e1000_cable_length_50; - else if (average <= e1000_igp_cable_length_80) - phy_info->cable_length = e1000_cable_length_50_80; - else if (average <= e1000_igp_cable_length_110) - phy_info->cable_length = e1000_cable_length_80_110; - else if (average <= e1000_igp_cable_length_140) - phy_info->cable_length = e1000_cable_length_110_140; - else - phy_info->cable_length = e1000_cable_length_140; - } - - return E1000_SUCCESS; -} + s32 ret_val; + u16 phy_data, min_length, max_length, average; + e1000_rev_polarity polarity; + + DEBUGFUNC("e1000_phy_igp_get_info"); + + /* The downshift status is checked only once, after link is established, + * and it stored in the hw->speed_downgraded parameter. */ + phy_info->downshift = (e1000_downshift) hw->speed_downgraded; + + /* IGP01E1000 does not need to support it. */ + phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; + + /* IGP01E1000 always correct polarity reversal */ + phy_info->polarity_correction = e1000_polarity_reversal_enabled; + + /* Check polarity status */ + ret_val = e1000_check_polarity(hw, &polarity); + if (ret_val) + return ret_val; + + phy_info->cable_polarity = polarity; + + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->mdix_mode = + (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >> + IGP01E1000_PSSR_MDIX_SHIFT); + + if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + /* Local/Remote Receiver Information are only valid at 1000 Mbps */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + + /* Get cable length */ + ret_val = e1000_get_cable_length(hw, &min_length, &max_length); + if (ret_val) + return ret_val; + + /* Translate to old method */ + average = (max_length + min_length) / 2; + + if (average <= e1000_igp_cable_length_50) + phy_info->cable_length = e1000_cable_length_50; + else if (average <= e1000_igp_cable_length_80) + phy_info->cable_length = e1000_cable_length_50_80; + else if (average <= e1000_igp_cable_length_110) + phy_info->cable_length = e1000_cable_length_80_110; + else if (average <= e1000_igp_cable_length_140) + phy_info->cable_length = e1000_cable_length_110_140; + else + phy_info->cable_length = e1000_cable_length_140; + } -/****************************************************************************** -* Get PHY information from various PHY registers for ife PHY only. -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ -static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info) -{ - s32 ret_val; - u16 phy_data; - e1000_rev_polarity polarity; - - DEBUGFUNC("e1000_phy_ife_get_info"); - - phy_info->downshift = (e1000_downshift)hw->speed_downgraded; - phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; - - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - phy_info->polarity_correction = - ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> - IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ? - e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; - - if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) { - ret_val = e1000_check_polarity(hw, &polarity); - if (ret_val) - return ret_val; - } else { - /* Polarity is forced. */ - polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >> - IFE_PSC_FORCE_POLARITY_SHIFT) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } - phy_info->cable_polarity = polarity; - - ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_info->mdix_mode = (e1000_auto_x_mode) - ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> - IFE_PMC_MDIX_MODE_SHIFT); - - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** -* Get PHY information from various PHY registers fot m88 PHY only. -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ +/** + * e1000_phy_m88_get_info - get m88 specific registers + * @hw: Struct containing variables accessed by shared code + * @phy_info: PHY information structure + * + * Get PHY information from various PHY registers for m88 PHY only. + */ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { - s32 ret_val; - u16 phy_data; - e1000_rev_polarity polarity; - - DEBUGFUNC("e1000_phy_m88_get_info"); - - /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = (e1000_downshift)hw->speed_downgraded; - - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_info->extended_10bt_distance = - ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> - M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? - e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal; - - phy_info->polarity_correction = - ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> - M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? - e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; - - /* Check polarity status */ - ret_val = e1000_check_polarity(hw, &polarity); - if (ret_val) - return ret_val; - phy_info->cable_polarity = polarity; - - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >> - M88E1000_PSSR_MDIX_SHIFT); - - if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { - /* Cable Length Estimation and Local/Remote Receiver Information - * are only valid at 1000 Mbps. - */ - if (hw->phy_type != e1000_phy_gg82563) { - phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT); - } else { - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, - &phy_data); - if (ret_val) - return ret_val; - - phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH); - } - - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if (ret_val) - return ret_val; - - phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT) ? - e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - - } - - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + e1000_rev_polarity polarity; + + DEBUGFUNC("e1000_phy_m88_get_info"); + + /* The downshift status is checked only once, after link is established, + * and it stored in the hw->speed_downgraded parameter. */ + phy_info->downshift = (e1000_downshift) hw->speed_downgraded; + + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_info->extended_10bt_distance = + ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> + M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? + e1000_10bt_ext_dist_enable_lower : + e1000_10bt_ext_dist_enable_normal; + + phy_info->polarity_correction = + ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> + M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; + + /* Check polarity status */ + ret_val = e1000_check_polarity(hw, &polarity); + if (ret_val) + return ret_val; + phy_info->cable_polarity = polarity; + + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->mdix_mode = + (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >> + M88E1000_PSSR_MDIX_SHIFT); + + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { + /* Cable Length Estimation and Local/Remote Receiver Information + * are only valid at 1000 Mbps. + */ + phy_info->cable_length = + (e1000_cable_length) ((phy_data & + M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT); + + ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + + } + + return E1000_SUCCESS; } -/****************************************************************************** -* Get PHY information from various PHY registers -* -* hw - Struct containing variables accessed by shared code -* phy_info - PHY information structure -******************************************************************************/ +/** + * e1000_phy_get_info - request phy info + * @hw: Struct containing variables accessed by shared code + * @phy_info: PHY information structure + * + * Get PHY information from various PHY registers + */ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_phy_get_info"); - - phy_info->cable_length = e1000_cable_length_undefined; - phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined; - phy_info->cable_polarity = e1000_rev_polarity_undefined; - phy_info->downshift = e1000_downshift_undefined; - phy_info->polarity_correction = e1000_polarity_reversal_undefined; - phy_info->mdix_mode = e1000_auto_x_mode_undefined; - phy_info->local_rx = e1000_1000t_rx_status_undefined; - phy_info->remote_rx = e1000_1000t_rx_status_undefined; - - if (hw->media_type != e1000_media_type_copper) { - DEBUGOUT("PHY info is only valid for copper media\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if (ret_val) - return ret_val; - - if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) { - DEBUGOUT("PHY info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) - return e1000_phy_igp_get_info(hw, phy_info); - else if (hw->phy_type == e1000_phy_ife) - return e1000_phy_ife_get_info(hw, phy_info); - else - return e1000_phy_m88_get_info(hw, phy_info); + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_phy_get_info"); + + phy_info->cable_length = e1000_cable_length_undefined; + phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined; + phy_info->cable_polarity = e1000_rev_polarity_undefined; + phy_info->downshift = e1000_downshift_undefined; + phy_info->polarity_correction = e1000_polarity_reversal_undefined; + phy_info->mdix_mode = e1000_auto_x_mode_undefined; + phy_info->local_rx = e1000_1000t_rx_status_undefined; + phy_info->remote_rx = e1000_1000t_rx_status_undefined; + + if (hw->media_type != e1000_media_type_copper) { + DEBUGOUT("PHY info is only valid for copper media\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if (ret_val) + return ret_val; + + if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) { + DEBUGOUT("PHY info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + if (hw->phy_type == e1000_phy_igp) + return e1000_phy_igp_get_info(hw, phy_info); + else + return e1000_phy_m88_get_info(hw, phy_info); } s32 e1000_validate_mdi_setting(struct e1000_hw *hw) { - DEBUGFUNC("e1000_validate_mdi_settings"); - - if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { - DEBUGOUT("Invalid MDI setting detected\n"); - hw->mdix = 1; - return -E1000_ERR_CONFIG; - } - return E1000_SUCCESS; -} + DEBUGFUNC("e1000_validate_mdi_settings"); + if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { + DEBUGOUT("Invalid MDI setting detected\n"); + hw->mdix = 1; + return -E1000_ERR_CONFIG; + } + return E1000_SUCCESS; +} -/****************************************************************************** - * Sets up eeprom variables in the hw struct. Must be called after mac_type - * is configured. Additionally, if this is ICH8, the flash controller GbE - * registers must be mapped, or this will crash. +/** + * e1000_init_eeprom_params - initialize sw eeprom vars + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Sets up eeprom variables in the hw struct. Must be called after mac_type + * is configured. + */ s32 e1000_init_eeprom_params(struct e1000_hw *hw) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd = er32(EECD); - s32 ret_val = E1000_SUCCESS; - u16 eeprom_size; - - DEBUGFUNC("e1000_init_eeprom_params"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - eeprom->type = e1000_eeprom_microwire; - eeprom->word_size = 64; - eeprom->opcode_bits = 3; - eeprom->address_bits = 6; - eeprom->delay_usec = 50; - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82540: - case e1000_82545: - case e1000_82545_rev_3: - case e1000_82546: - case e1000_82546_rev_3: - eeprom->type = e1000_eeprom_microwire; - eeprom->opcode_bits = 3; - eeprom->delay_usec = 50; - if (eecd & E1000_EECD_SIZE) { - eeprom->word_size = 256; - eeprom->address_bits = 8; - } else { - eeprom->word_size = 64; - eeprom->address_bits = 6; - } - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82541: - case e1000_82541_rev_2: - case e1000_82547: - case e1000_82547_rev_2: - if (eecd & E1000_EECD_TYPE) { - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - } else { - eeprom->type = e1000_eeprom_microwire; - eeprom->opcode_bits = 3; - eeprom->delay_usec = 50; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->word_size = 256; - eeprom->address_bits = 8; - } else { - eeprom->word_size = 64; - eeprom->address_bits = 6; - } - } - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82571: - case e1000_82572: - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - eeprom->use_eerd = false; - eeprom->use_eewr = false; - break; - case e1000_82573: - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - eeprom->use_eerd = true; - eeprom->use_eewr = true; - if (!e1000_is_onboard_nvm_eeprom(hw)) { - eeprom->type = e1000_eeprom_flash; - eeprom->word_size = 2048; - - /* Ensure that the Autonomous FLASH update bit is cleared due to - * Flash update issue on parts which use a FLASH for NVM. */ - eecd &= ~E1000_EECD_AUPDEN; - ew32(EECD, eecd); - } - break; - case e1000_80003es2lan: - eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) { - eeprom->page_size = 32; - eeprom->address_bits = 16; - } else { - eeprom->page_size = 8; - eeprom->address_bits = 8; - } - eeprom->use_eerd = true; - eeprom->use_eewr = false; - break; - case e1000_ich8lan: - { - s32 i = 0; - u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); - - eeprom->type = e1000_eeprom_ich8; - eeprom->use_eerd = false; - eeprom->use_eewr = false; - eeprom->word_size = E1000_SHADOW_RAM_WORDS; - - /* Zero the shadow RAM structure. But don't load it from NVM - * so as to save time for driver init */ - if (hw->eeprom_shadow_ram != NULL) { - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = false; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } - } - - hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) * - ICH_FLASH_SECTOR_SIZE; - - hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1; - hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK); - - hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE; - - hw->flash_bank_size /= 2 * sizeof(u16); - - break; - } - default: - break; - } - - if (eeprom->type == e1000_eeprom_spi) { - /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to - * 32KB (incremented by powers of 2). - */ - if (hw->mac_type <= e1000_82547_rev_2) { - /* Set to default value for initial eeprom read. */ - eeprom->word_size = 64; - ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); - if (ret_val) - return ret_val; - eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; - /* 256B eeprom size was not supported in earlier hardware, so we - * bump eeprom_size up one to ensure that "1" (which maps to 256B) - * is never the result used in the shifting logic below. */ - if (eeprom_size) - eeprom_size++; - } else { - eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); - } - - eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); - } - return ret_val; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd = er32(EECD); + s32 ret_val = E1000_SUCCESS; + u16 eeprom_size; + + DEBUGFUNC("e1000_init_eeprom_params"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + eeprom->type = e1000_eeprom_microwire; + eeprom->word_size = 64; + eeprom->opcode_bits = 3; + eeprom->address_bits = 6; + eeprom->delay_usec = 50; + break; + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + eeprom->type = e1000_eeprom_microwire; + eeprom->opcode_bits = 3; + eeprom->delay_usec = 50; + if (eecd & E1000_EECD_SIZE) { + eeprom->word_size = 256; + eeprom->address_bits = 8; + } else { + eeprom->word_size = 64; + eeprom->address_bits = 6; + } + break; + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + if (eecd & E1000_EECD_TYPE) { + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + } else { + eeprom->type = e1000_eeprom_microwire; + eeprom->opcode_bits = 3; + eeprom->delay_usec = 50; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->word_size = 256; + eeprom->address_bits = 8; + } else { + eeprom->word_size = 64; + eeprom->address_bits = 6; + } + } + break; + default: + break; + } + + if (eeprom->type == e1000_eeprom_spi) { + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to + * 32KB (incremented by powers of 2). + */ + /* Set to default value for initial eeprom read. */ + eeprom->word_size = 64; + ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); + if (ret_val) + return ret_val; + eeprom_size = + (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; + /* 256B eeprom size was not supported in earlier hardware, so we + * bump eeprom_size up one to ensure that "1" (which maps to 256B) + * is never the result used in the shifting logic below. */ + if (eeprom_size) + eeprom_size++; + + eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); + } + return ret_val; } -/****************************************************************************** - * Raises the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd - EECD's current value - *****************************************************************************/ +/** + * e1000_raise_ee_clk - Raises the EEPROM's clock input. + * @hw: Struct containing variables accessed by shared code + * @eecd: EECD's current value + */ static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd) { - /* Raise the clock input to the EEPROM (by setting the SK bit), and then - * wait <delay> microseconds. - */ - *eecd = *eecd | E1000_EECD_SK; - ew32(EECD, *eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); + /* Raise the clock input to the EEPROM (by setting the SK bit), and then + * wait <delay> microseconds. + */ + *eecd = *eecd | E1000_EECD_SK; + ew32(EECD, *eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); } -/****************************************************************************** - * Lowers the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd - EECD's current value - *****************************************************************************/ +/** + * e1000_lower_ee_clk - Lowers the EEPROM's clock input. + * @hw: Struct containing variables accessed by shared code + * @eecd: EECD's current value + */ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd) { - /* Lower the clock input to the EEPROM (by clearing the SK bit), and then - * wait 50 microseconds. - */ - *eecd = *eecd & ~E1000_EECD_SK; - ew32(EECD, *eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); + /* Lower the clock input to the EEPROM (by clearing the SK bit), and then + * wait 50 microseconds. + */ + *eecd = *eecd & ~E1000_EECD_SK; + ew32(EECD, *eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); } -/****************************************************************************** - * Shift data bits out to the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * data - data to send to the EEPROM - * count - number of bits to shift out - *****************************************************************************/ +/** + * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM. + * @hw: Struct containing variables accessed by shared code + * @data: data to send to the EEPROM + * @count: number of bits to shift out + */ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd; - u32 mask; - - /* We need to shift "count" bits out to the EEPROM. So, value in the - * "data" parameter will be shifted out to the EEPROM one bit at a time. - * In order to do this, "data" must be broken down into bits. - */ - mask = 0x01 << (count - 1); - eecd = er32(EECD); - if (eeprom->type == e1000_eeprom_microwire) { - eecd &= ~E1000_EECD_DO; - } else if (eeprom->type == e1000_eeprom_spi) { - eecd |= E1000_EECD_DO; - } - do { - /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", - * and then raising and then lowering the clock (the SK bit controls - * the clock input to the EEPROM). A "0" is shifted out to the EEPROM - * by setting "DI" to "0" and then raising and then lowering the clock. - */ - eecd &= ~E1000_EECD_DI; - - if (data & mask) - eecd |= E1000_EECD_DI; - - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - - udelay(eeprom->delay_usec); - - e1000_raise_ee_clk(hw, &eecd); - e1000_lower_ee_clk(hw, &eecd); - - mask = mask >> 1; - - } while (mask); - - /* We leave the "DI" bit set to "0" when we leave this routine. */ - eecd &= ~E1000_EECD_DI; - ew32(EECD, eecd); + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd; + u32 mask; + + /* We need to shift "count" bits out to the EEPROM. So, value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + */ + mask = 0x01 << (count - 1); + eecd = er32(EECD); + if (eeprom->type == e1000_eeprom_microwire) { + eecd &= ~E1000_EECD_DO; + } else if (eeprom->type == e1000_eeprom_spi) { + eecd |= E1000_EECD_DO; + } + do { + /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", + * and then raising and then lowering the clock (the SK bit controls + * the clock input to the EEPROM). A "0" is shifted out to the EEPROM + * by setting "DI" to "0" and then raising and then lowering the clock. + */ + eecd &= ~E1000_EECD_DI; + + if (data & mask) + eecd |= E1000_EECD_DI; + + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + + udelay(eeprom->delay_usec); + + e1000_raise_ee_clk(hw, &eecd); + e1000_lower_ee_clk(hw, &eecd); + + mask = mask >> 1; + + } while (mask); + + /* We leave the "DI" bit set to "0" when we leave this routine. */ + eecd &= ~E1000_EECD_DI; + ew32(EECD, eecd); } -/****************************************************************************** - * Shift data bits in from the EEPROM - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM + * @hw: Struct containing variables accessed by shared code + * @count: number of bits to shift in + */ static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count) { - u32 eecd; - u32 i; - u16 data; + u32 eecd; + u32 i; + u16 data; - /* In order to read a register from the EEPROM, we need to shift 'count' - * bits in from the EEPROM. Bits are "shifted in" by raising the clock - * input to the EEPROM (setting the SK bit), and then reading the value of - * the "DO" bit. During this "shifting in" process the "DI" bit should - * always be clear. - */ + /* In order to read a register from the EEPROM, we need to shift 'count' + * bits in from the EEPROM. Bits are "shifted in" by raising the clock + * input to the EEPROM (setting the SK bit), and then reading the value of + * the "DO" bit. During this "shifting in" process the "DI" bit should + * always be clear. + */ - eecd = er32(EECD); + eecd = er32(EECD); - eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); - data = 0; + eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); + data = 0; - for (i = 0; i < count; i++) { - data = data << 1; - e1000_raise_ee_clk(hw, &eecd); + for (i = 0; i < count; i++) { + data = data << 1; + e1000_raise_ee_clk(hw, &eecd); - eecd = er32(EECD); + eecd = er32(EECD); - eecd &= ~(E1000_EECD_DI); - if (eecd & E1000_EECD_DO) - data |= 1; + eecd &= ~(E1000_EECD_DI); + if (eecd & E1000_EECD_DO) + data |= 1; - e1000_lower_ee_clk(hw, &eecd); - } + e1000_lower_ee_clk(hw, &eecd); + } - return data; + return data; } -/****************************************************************************** - * Prepares EEPROM for access - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_acquire_eeprom - Prepares EEPROM for access + * @hw: Struct containing variables accessed by shared code * * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This * function should be called before issuing a command to the EEPROM. - *****************************************************************************/ + */ static s32 e1000_acquire_eeprom(struct e1000_hw *hw) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd, i=0; - - DEBUGFUNC("e1000_acquire_eeprom"); - - if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM)) - return -E1000_ERR_SWFW_SYNC; - eecd = er32(EECD); - - if (hw->mac_type != e1000_82573) { - /* Request EEPROM Access */ - if (hw->mac_type > e1000_82544) { - eecd |= E1000_EECD_REQ; - ew32(EECD, eecd); - eecd = er32(EECD); - while ((!(eecd & E1000_EECD_GNT)) && - (i < E1000_EEPROM_GRANT_ATTEMPTS)) { - i++; - udelay(5); - eecd = er32(EECD); - } - if (!(eecd & E1000_EECD_GNT)) { - eecd &= ~E1000_EECD_REQ; - ew32(EECD, eecd); - DEBUGOUT("Could not acquire EEPROM grant\n"); - e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); - return -E1000_ERR_EEPROM; - } - } - } - - /* Setup EEPROM for Read/Write */ - - if (eeprom->type == e1000_eeprom_microwire) { - /* Clear SK and DI */ - eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); - ew32(EECD, eecd); - - /* Set CS */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - } else if (eeprom->type == e1000_eeprom_spi) { - /* Clear SK and CS */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - ew32(EECD, eecd); - udelay(1); - } - - return E1000_SUCCESS; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd, i = 0; + + DEBUGFUNC("e1000_acquire_eeprom"); + + eecd = er32(EECD); + + /* Request EEPROM Access */ + if (hw->mac_type > e1000_82544) { + eecd |= E1000_EECD_REQ; + ew32(EECD, eecd); + eecd = er32(EECD); + while ((!(eecd & E1000_EECD_GNT)) && + (i < E1000_EEPROM_GRANT_ATTEMPTS)) { + i++; + udelay(5); + eecd = er32(EECD); + } + if (!(eecd & E1000_EECD_GNT)) { + eecd &= ~E1000_EECD_REQ; + ew32(EECD, eecd); + DEBUGOUT("Could not acquire EEPROM grant\n"); + return -E1000_ERR_EEPROM; + } + } + + /* Setup EEPROM for Read/Write */ + + if (eeprom->type == e1000_eeprom_microwire) { + /* Clear SK and DI */ + eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); + ew32(EECD, eecd); + + /* Set CS */ + eecd |= E1000_EECD_CS; + ew32(EECD, eecd); + } else if (eeprom->type == e1000_eeprom_spi) { + /* Clear SK and CS */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + ew32(EECD, eecd); + udelay(1); + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Returns EEPROM to a "standby" state - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_standby_eeprom - Returns EEPROM to a "standby" state + * @hw: Struct containing variables accessed by shared code + */ static void e1000_standby_eeprom(struct e1000_hw *hw) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd; - - eecd = er32(EECD); - - if (eeprom->type == e1000_eeprom_microwire) { - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - - /* Clock high */ - eecd |= E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - - /* Select EEPROM */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - - /* Clock low */ - eecd &= ~E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - } else if (eeprom->type == e1000_eeprom_spi) { - /* Toggle CS to flush commands */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - eecd &= ~E1000_EECD_CS; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(eeprom->delay_usec); - } + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd; + + eecd = er32(EECD); + + if (eeprom->type == e1000_eeprom_microwire) { + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + + /* Clock high */ + eecd |= E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + + /* Select EEPROM */ + eecd |= E1000_EECD_CS; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + + /* Clock low */ + eecd &= ~E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + } else if (eeprom->type == e1000_eeprom_spi) { + /* Toggle CS to flush commands */ + eecd |= E1000_EECD_CS; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + eecd &= ~E1000_EECD_CS; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(eeprom->delay_usec); + } } -/****************************************************************************** - * Terminates a command by inverting the EEPROM's chip select pin +/** + * e1000_release_eeprom - drop chip select + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Terminates a command by inverting the EEPROM's chip select pin + */ static void e1000_release_eeprom(struct e1000_hw *hw) { - u32 eecd; - - DEBUGFUNC("e1000_release_eeprom"); + u32 eecd; - eecd = er32(EECD); + DEBUGFUNC("e1000_release_eeprom"); - if (hw->eeprom.type == e1000_eeprom_spi) { - eecd |= E1000_EECD_CS; /* Pull CS high */ - eecd &= ~E1000_EECD_SK; /* Lower SCK */ + eecd = er32(EECD); - ew32(EECD, eecd); + if (hw->eeprom.type == e1000_eeprom_spi) { + eecd |= E1000_EECD_CS; /* Pull CS high */ + eecd &= ~E1000_EECD_SK; /* Lower SCK */ - udelay(hw->eeprom.delay_usec); - } else if (hw->eeprom.type == e1000_eeprom_microwire) { - /* cleanup eeprom */ + ew32(EECD, eecd); - /* CS on Microwire is active-high */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); + udelay(hw->eeprom.delay_usec); + } else if (hw->eeprom.type == e1000_eeprom_microwire) { + /* cleanup eeprom */ - ew32(EECD, eecd); + /* CS on Microwire is active-high */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); - /* Rising edge of clock */ - eecd |= E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); + ew32(EECD, eecd); - /* Falling edge of clock */ - eecd &= ~E1000_EECD_SK; - ew32(EECD, eecd); - E1000_WRITE_FLUSH(); - udelay(hw->eeprom.delay_usec); - } + /* Rising edge of clock */ + eecd |= E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); - /* Stop requesting EEPROM access */ - if (hw->mac_type > e1000_82544) { - eecd &= ~E1000_EECD_REQ; - ew32(EECD, eecd); - } + /* Falling edge of clock */ + eecd &= ~E1000_EECD_SK; + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); + udelay(hw->eeprom.delay_usec); + } - e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); + /* Stop requesting EEPROM access */ + if (hw->mac_type > e1000_82544) { + eecd &= ~E1000_EECD_REQ; + ew32(EECD, eecd); + } } -/****************************************************************************** - * Reads a 16 bit word from the EEPROM. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM. + * @hw: Struct containing variables accessed by shared code + */ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) { - u16 retry_count = 0; - u8 spi_stat_reg; - - DEBUGFUNC("e1000_spi_eeprom_ready"); - - /* Read "Status Register" repeatedly until the LSB is cleared. The - * EEPROM will signal that the command has been completed by clearing - * bit 0 of the internal status register. If it's not cleared within - * 5 milliseconds, then error out. - */ - retry_count = 0; - do { - e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI, - hw->eeprom.opcode_bits); - spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8); - if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI)) - break; - - udelay(5); - retry_count += 5; - - e1000_standby_eeprom(hw); - } while (retry_count < EEPROM_MAX_RETRY_SPI); - - /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and - * only 0-5mSec on 5V devices) - */ - if (retry_count >= EEPROM_MAX_RETRY_SPI) { - DEBUGOUT("SPI EEPROM Status error\n"); - return -E1000_ERR_EEPROM; - } - - return E1000_SUCCESS; -} - -/****************************************************************************** - * Reads a 16 bit word from the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - s32 ret; - spin_lock(&e1000_eeprom_lock); - ret = e1000_do_read_eeprom(hw, offset, words, data); - spin_unlock(&e1000_eeprom_lock); - return ret; -} - -static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 i = 0; - - DEBUGFUNC("e1000_read_eeprom"); - - /* If eeprom is not yet detected, do so now */ - if (eeprom->word_size == 0) - e1000_init_eeprom_params(hw); - - /* A check for invalid values: offset too large, too many words, and not - * enough words. - */ - if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || - (words == 0)) { - DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size); - return -E1000_ERR_EEPROM; - } - - /* EEPROM's that don't use EERD to read require us to bit-bang the SPI - * directly. In this case, we need to acquire the EEPROM so that - * FW or other port software does not interrupt. - */ - if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) { - /* Prepare the EEPROM for bit-bang reading */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - } - - /* Eerd register EEPROM access requires no eeprom aquire/release */ - if (eeprom->use_eerd) - return e1000_read_eeprom_eerd(hw, offset, words, data); - - /* ICH EEPROM access is done via the ICH flash controller */ - if (eeprom->type == e1000_eeprom_ich8) - return e1000_read_eeprom_ich8(hw, offset, words, data); - - /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have - * acquired the EEPROM at this point, so any returns should relase it */ - if (eeprom->type == e1000_eeprom_spi) { - u16 word_in; - u8 read_opcode = EEPROM_READ_OPCODE_SPI; - - if (e1000_spi_eeprom_ready(hw)) { - e1000_release_eeprom(hw); - return -E1000_ERR_EEPROM; - } - - e1000_standby_eeprom(hw); - - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ - if ((eeprom->address_bits == 8) && (offset >= 128)) - read_opcode |= EEPROM_A8_OPCODE_SPI; - - /* Send the READ command (opcode + addr) */ - e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits); - - /* Read the data. The address of the eeprom internally increments with - * each byte (spi) being read, saving on the overhead of eeprom setup - * and tear-down. The address counter will roll over if reading beyond - * the size of the eeprom, thus allowing the entire memory to be read - * starting from any offset. */ - for (i = 0; i < words; i++) { - word_in = e1000_shift_in_ee_bits(hw, 16); - data[i] = (word_in >> 8) | (word_in << 8); - } - } else if (eeprom->type == e1000_eeprom_microwire) { - for (i = 0; i < words; i++) { - /* Send the READ command (opcode + addr) */ - e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE, - eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16)(offset + i), - eeprom->address_bits); - - /* Read the data. For microwire, each word requires the overhead - * of eeprom setup and tear-down. */ - data[i] = e1000_shift_in_ee_bits(hw, 16); - e1000_standby_eeprom(hw); - } - } - - /* End this read operation */ - e1000_release_eeprom(hw); - - return E1000_SUCCESS; -} + u16 retry_count = 0; + u8 spi_stat_reg; -/****************************************************************************** - * Reads a 16 bit word from the EEPROM using the EERD register. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - u32 i, eerd = 0; - s32 error = 0; + DEBUGFUNC("e1000_spi_eeprom_ready"); - for (i = 0; i < words; i++) { - eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + - E1000_EEPROM_RW_REG_START; + /* Read "Status Register" repeatedly until the LSB is cleared. The + * EEPROM will signal that the command has been completed by clearing + * bit 0 of the internal status register. If it's not cleared within + * 5 milliseconds, then error out. + */ + retry_count = 0; + do { + e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI, + hw->eeprom.opcode_bits); + spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8); + if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI)) + break; - ew32(EERD, eerd); - error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); + udelay(5); + retry_count += 5; - if (error) { - break; - } - data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA); + e1000_standby_eeprom(hw); + } while (retry_count < EEPROM_MAX_RETRY_SPI); - } + /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and + * only 0-5mSec on 5V devices) + */ + if (retry_count >= EEPROM_MAX_RETRY_SPI) { + DEBUGOUT("SPI EEPROM Status error\n"); + return -E1000_ERR_EEPROM; + } - return error; + return E1000_SUCCESS; } -/****************************************************************************** - * Writes a 16 bit word from the EEPROM using the EEWR register. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) +/** + * e1000_read_eeprom - Reads a 16 bit word from the EEPROM. + * @hw: Struct containing variables accessed by shared code + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * @words: number of words to read + */ +s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - u32 register_value = 0; - u32 i = 0; - s32 error = 0; - - if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM)) - return -E1000_ERR_SWFW_SYNC; - - for (i = 0; i < words; i++) { - register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) | - ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) | - E1000_EEPROM_RW_REG_START; - - error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); - if (error) { - break; - } - - ew32(EEWR, register_value); - - error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); - - if (error) { - break; - } - } - - e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); - return error; + s32 ret; + spin_lock(&e1000_eeprom_lock); + ret = e1000_do_read_eeprom(hw, offset, words, data); + spin_unlock(&e1000_eeprom_lock); + return ret; } -/****************************************************************************** - * Polls the status bit (bit 1) of the EERD to determine when the read is done. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) +static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { - u32 attempts = 100000; - u32 i, reg = 0; - s32 done = E1000_ERR_EEPROM; - - for (i = 0; i < attempts; i++) { - if (eerd == E1000_EEPROM_POLL_READ) - reg = er32(EERD); - else - reg = er32(EEWR); - - if (reg & E1000_EEPROM_RW_REG_DONE) { - done = E1000_SUCCESS; - break; - } - udelay(5); - } - - return done; -} + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 i = 0; -/*************************************************************************** -* Description: Determines if the onboard NVM is FLASH or EEPROM. -* -* hw - Struct containing variables accessed by shared code -****************************************************************************/ -static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) -{ - u32 eecd = 0; + DEBUGFUNC("e1000_read_eeprom"); - DEBUGFUNC("e1000_is_onboard_nvm_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + + /* A check for invalid values: offset too large, too many words, and not + * enough words. + */ + if ((offset >= eeprom->word_size) + || (words > eeprom->word_size - offset) || (words == 0)) { + DEBUGOUT2 + ("\"words\" parameter out of bounds. Words = %d, size = %d\n", + offset, eeprom->word_size); + return -E1000_ERR_EEPROM; + } - if (hw->mac_type == e1000_ich8lan) - return false; + /* EEPROM's that don't use EERD to read require us to bit-bang the SPI + * directly. In this case, we need to acquire the EEPROM so that + * FW or other port software does not interrupt. + */ + /* Prepare the EEPROM for bit-bang reading */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + + /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have + * acquired the EEPROM at this point, so any returns should release it */ + if (eeprom->type == e1000_eeprom_spi) { + u16 word_in; + u8 read_opcode = EEPROM_READ_OPCODE_SPI; + + if (e1000_spi_eeprom_ready(hw)) { + e1000_release_eeprom(hw); + return -E1000_ERR_EEPROM; + } - if (hw->mac_type == e1000_82573) { - eecd = er32(EECD); + e1000_standby_eeprom(hw); + + /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + if ((eeprom->address_bits == 8) && (offset >= 128)) + read_opcode |= EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits); + e1000_shift_out_ee_bits(hw, (u16) (offset * 2), + eeprom->address_bits); + + /* Read the data. The address of the eeprom internally increments with + * each byte (spi) being read, saving on the overhead of eeprom setup + * and tear-down. The address counter will roll over if reading beyond + * the size of the eeprom, thus allowing the entire memory to be read + * starting from any offset. */ + for (i = 0; i < words; i++) { + word_in = e1000_shift_in_ee_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + } else if (eeprom->type == e1000_eeprom_microwire) { + for (i = 0; i < words; i++) { + /* Send the READ command (opcode + addr) */ + e1000_shift_out_ee_bits(hw, + EEPROM_READ_OPCODE_MICROWIRE, + eeprom->opcode_bits); + e1000_shift_out_ee_bits(hw, (u16) (offset + i), + eeprom->address_bits); + + /* Read the data. For microwire, each word requires the overhead + * of eeprom setup and tear-down. */ + data[i] = e1000_shift_in_ee_bits(hw, 16); + e1000_standby_eeprom(hw); + } + } - /* Isolate bits 15 & 16 */ - eecd = ((eecd >> 15) & 0x03); + /* End this read operation */ + e1000_release_eeprom(hw); - /* If both bits are set, device is Flash type */ - if (eecd == 0x03) { - return false; - } - } - return true; + return E1000_SUCCESS; } -/****************************************************************************** - * Verifies that the EEPROM has a valid checksum - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum + * @hw: Struct containing variables accessed by shared code * * Reads the first 64 16 bit words of the EEPROM and sums the values read. * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. - *****************************************************************************/ + */ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) { - u16 checksum = 0; - u16 i, eeprom_data; - - DEBUGFUNC("e1000_validate_eeprom_checksum"); - - if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) { - /* Check bit 4 of word 10h. If it is 0, firmware is done updating - * 10h-12h. Checksum may need to be fixed. */ - e1000_read_eeprom(hw, 0x10, 1, &eeprom_data); - if ((eeprom_data & 0x10) == 0) { - /* Read 0x23 and check bit 15. This bit is a 1 when the checksum - * has already been fixed. If the checksum is still wrong and this - * bit is a 1, we need to return bad checksum. Otherwise, we need - * to set this bit to a 1 and update the checksum. */ - e1000_read_eeprom(hw, 0x23, 1, &eeprom_data); - if ((eeprom_data & 0x8000) == 0) { - eeprom_data |= 0x8000; - e1000_write_eeprom(hw, 0x23, 1, &eeprom_data); - e1000_update_eeprom_checksum(hw); - } - } - } - - if (hw->mac_type == e1000_ich8lan) { - /* Drivers must allocate the shadow ram structure for the - * EEPROM checksum to be updated. Otherwise, this bit as well - * as the checksum must both be set correctly for this - * validation to pass. - */ - e1000_read_eeprom(hw, 0x19, 1, &eeprom_data); - if ((eeprom_data & 0x40) == 0) { - eeprom_data |= 0x40; - e1000_write_eeprom(hw, 0x19, 1, &eeprom_data); - e1000_update_eeprom_checksum(hw); - } - } - - for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - checksum += eeprom_data; - } - - if (checksum == (u16)EEPROM_SUM) - return E1000_SUCCESS; - else { - DEBUGOUT("EEPROM Checksum Invalid\n"); - return -E1000_ERR_EEPROM; - } + u16 checksum = 0; + u16 i, eeprom_data; + + DEBUGFUNC("e1000_validate_eeprom_checksum"); + + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + checksum += eeprom_data; + } + + if (checksum == (u16) EEPROM_SUM) + return E1000_SUCCESS; + else { + DEBUGOUT("EEPROM Checksum Invalid\n"); + return -E1000_ERR_EEPROM; + } } -/****************************************************************************** - * Calculates the EEPROM checksum and writes it to the EEPROM - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum + * @hw: Struct containing variables accessed by shared code * * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. * Writes the difference to word offset 63 of the EEPROM. - *****************************************************************************/ + */ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) { - u32 ctrl_ext; - u16 checksum = 0; - u16 i, eeprom_data; - - DEBUGFUNC("e1000_update_eeprom_checksum"); - - for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { - if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - checksum += eeprom_data; - } - checksum = (u16)EEPROM_SUM - checksum; - if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { - DEBUGOUT("EEPROM Write Error\n"); - return -E1000_ERR_EEPROM; - } else if (hw->eeprom.type == e1000_eeprom_flash) { - e1000_commit_shadow_ram(hw); - } else if (hw->eeprom.type == e1000_eeprom_ich8) { - e1000_commit_shadow_ram(hw); - /* Reload the EEPROM, or else modifications will not appear - * until after next adapter reset. */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - msleep(10); - } - return E1000_SUCCESS; + u16 checksum = 0; + u16 i, eeprom_data; + + DEBUGFUNC("e1000_update_eeprom_checksum"); + + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { + if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + checksum += eeprom_data; + } + checksum = (u16) EEPROM_SUM - checksum; + if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { + DEBUGOUT("EEPROM Write Error\n"); + return -E1000_ERR_EEPROM; + } + return E1000_SUCCESS; } -/****************************************************************************** - * Parent function for writing words to the different EEPROM types. - * - * hw - Struct containing variables accessed by shared code - * offset - offset within the EEPROM to be written to - * words - number of words to write - * data - 16 bit word to be written to the EEPROM +/** + * e1000_write_eeprom - write words to the different EEPROM types. + * @hw: Struct containing variables accessed by shared code + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word to be written to the EEPROM * * If e1000_update_eeprom_checksum is not called after this function, the * EEPROM will most likely contain an invalid checksum. - *****************************************************************************/ + */ s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - s32 ret; - spin_lock(&e1000_eeprom_lock); - ret = e1000_do_write_eeprom(hw, offset, words, data); - spin_unlock(&e1000_eeprom_lock); - return ret; + s32 ret; + spin_lock(&e1000_eeprom_lock); + ret = e1000_do_write_eeprom(hw, offset, words, data); + spin_unlock(&e1000_eeprom_lock); + return ret; } - -static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - s32 status = 0; - - DEBUGFUNC("e1000_write_eeprom"); - - /* If eeprom is not yet detected, do so now */ - if (eeprom->word_size == 0) - e1000_init_eeprom_params(hw); - - /* A check for invalid values: offset too large, too many words, and not - * enough words. - */ - if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || - (words == 0)) { - DEBUGOUT("\"words\" parameter out of bounds\n"); - return -E1000_ERR_EEPROM; - } - - /* 82573 writes only through eewr */ - if (eeprom->use_eewr) - return e1000_write_eeprom_eewr(hw, offset, words, data); - - if (eeprom->type == e1000_eeprom_ich8) - return e1000_write_eeprom_ich8(hw, offset, words, data); - - /* Prepare the EEPROM for writing */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - - if (eeprom->type == e1000_eeprom_microwire) { - status = e1000_write_eeprom_microwire(hw, offset, words, data); - } else { - status = e1000_write_eeprom_spi(hw, offset, words, data); - msleep(10); - } - - /* Done with writing */ - e1000_release_eeprom(hw); - - return status; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + s32 status = 0; + + DEBUGFUNC("e1000_write_eeprom"); + + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + + /* A check for invalid values: offset too large, too many words, and not + * enough words. + */ + if ((offset >= eeprom->word_size) + || (words > eeprom->word_size - offset) || (words == 0)) { + DEBUGOUT("\"words\" parameter out of bounds\n"); + return -E1000_ERR_EEPROM; + } + + /* Prepare the EEPROM for writing */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + + if (eeprom->type == e1000_eeprom_microwire) { + status = e1000_write_eeprom_microwire(hw, offset, words, data); + } else { + status = e1000_write_eeprom_spi(hw, offset, words, data); + msleep(10); + } + + /* Done with writing */ + e1000_release_eeprom(hw); + + return status; } -/****************************************************************************** - * Writes a 16 bit word to a given offset in an SPI EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset within the EEPROM to be written to - * words - number of words to write - * data - pointer to array of 8 bit words to be written to the EEPROM - * - *****************************************************************************/ +/** + * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM. + * @hw: Struct containing variables accessed by shared code + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: pointer to array of 8 bit words to be written to the EEPROM + */ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u16 widx = 0; + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u16 widx = 0; - DEBUGFUNC("e1000_write_eeprom_spi"); + DEBUGFUNC("e1000_write_eeprom_spi"); - while (widx < words) { - u8 write_opcode = EEPROM_WRITE_OPCODE_SPI; + while (widx < words) { + u8 write_opcode = EEPROM_WRITE_OPCODE_SPI; - if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM; + if (e1000_spi_eeprom_ready(hw)) + return -E1000_ERR_EEPROM; - e1000_standby_eeprom(hw); + e1000_standby_eeprom(hw); - /* Send the WRITE ENABLE command (8 bit opcode ) */ - e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI, - eeprom->opcode_bits); + /* Send the WRITE ENABLE command (8 bit opcode ) */ + e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI, + eeprom->opcode_bits); - e1000_standby_eeprom(hw); + e1000_standby_eeprom(hw); - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ - if ((eeprom->address_bits == 8) && (offset >= 128)) - write_opcode |= EEPROM_A8_OPCODE_SPI; + /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + if ((eeprom->address_bits == 8) && (offset >= 128)) + write_opcode |= EEPROM_A8_OPCODE_SPI; - /* Send the Write command (8-bit opcode + addr) */ - e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits); + /* Send the Write command (8-bit opcode + addr) */ + e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits); - e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2), - eeprom->address_bits); + e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2), + eeprom->address_bits); - /* Send the data */ + /* Send the data */ - /* Loop to allow for up to whole page write (32 bytes) of eeprom */ - while (widx < words) { - u16 word_out = data[widx]; - word_out = (word_out >> 8) | (word_out << 8); - e1000_shift_out_ee_bits(hw, word_out, 16); - widx++; + /* Loop to allow for up to whole page write (32 bytes) of eeprom */ + while (widx < words) { + u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); + e1000_shift_out_ee_bits(hw, word_out, 16); + widx++; - /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE - * operation, while the smaller eeproms are capable of an 8-byte - * PAGE WRITE operation. Break the inner loop to pass new address - */ - if ((((offset + widx)*2) % eeprom->page_size) == 0) { - e1000_standby_eeprom(hw); - break; - } - } - } + /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE + * operation, while the smaller eeproms are capable of an 8-byte + * PAGE WRITE operation. Break the inner loop to pass new address + */ + if ((((offset + widx) * 2) % eeprom->page_size) == 0) { + e1000_standby_eeprom(hw); + break; + } + } + } - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** - * Writes a 16 bit word to a given offset in a Microwire EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset within the EEPROM to be written to - * words - number of words to write - * data - pointer to array of 16 bit words to be written to the EEPROM - * - *****************************************************************************/ +/** + * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM. + * @hw: Struct containing variables accessed by shared code + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: pointer to array of 8 bit words to be written to the EEPROM + */ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd; - u16 words_written = 0; - u16 i = 0; - - DEBUGFUNC("e1000_write_eeprom_microwire"); - - /* Send the write enable command to the EEPROM (3-bit opcode plus - * 6/8-bit dummy address beginning with 11). It's less work to include - * the 11 of the dummy address as part of the opcode than it is to shift - * it over the correct number of bits for the address. This puts the - * EEPROM into write/erase mode. - */ - e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE, - (u16)(eeprom->opcode_bits + 2)); - - e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2)); - - /* Prepare the EEPROM */ - e1000_standby_eeprom(hw); - - while (words_written < words) { - /* Send the Write command (3-bit opcode + addr) */ - e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE, - eeprom->opcode_bits); - - e1000_shift_out_ee_bits(hw, (u16)(offset + words_written), - eeprom->address_bits); - - /* Send the data */ - e1000_shift_out_ee_bits(hw, data[words_written], 16); - - /* Toggle the CS line. This in effect tells the EEPROM to execute - * the previous command. - */ - e1000_standby_eeprom(hw); - - /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will - * signal that the command has been completed by raising the DO signal. - * If DO does not go high in 10 milliseconds, then error out. - */ - for (i = 0; i < 200; i++) { - eecd = er32(EECD); - if (eecd & E1000_EECD_DO) break; - udelay(50); - } - if (i == 200) { - DEBUGOUT("EEPROM Write did not complete\n"); - return -E1000_ERR_EEPROM; - } - - /* Recover from write */ - e1000_standby_eeprom(hw); - - words_written++; - } - - /* Send the write disable command to the EEPROM (3-bit opcode plus - * 6/8-bit dummy address beginning with 10). It's less work to include - * the 10 of the dummy address as part of the opcode than it is to shift - * it over the correct number of bits for the address. This takes the - * EEPROM out of write/erase mode. - */ - e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE, - (u16)(eeprom->opcode_bits + 2)); - - e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2)); - - return E1000_SUCCESS; -} + struct e1000_eeprom_info *eeprom = &hw->eeprom; + u32 eecd; + u16 words_written = 0; + u16 i = 0; -/****************************************************************************** - * Flushes the cached eeprom to NVM. This is done by saving the modified values - * in the eeprom cache and the non modified values in the currently active bank - * to the new bank. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_commit_shadow_ram(struct e1000_hw *hw) -{ - u32 attempts = 100000; - u32 eecd = 0; - u32 flop = 0; - u32 i = 0; - s32 error = E1000_SUCCESS; - u32 old_bank_offset = 0; - u32 new_bank_offset = 0; - u8 low_byte = 0; - u8 high_byte = 0; - bool sector_write_failed = false; - - if (hw->mac_type == e1000_82573) { - /* The flop register will be used to determine if flash type is STM */ - flop = er32(FLOP); - for (i=0; i < attempts; i++) { - eecd = er32(EECD); - if ((eecd & E1000_EECD_FLUPD) == 0) { - break; - } - udelay(5); - } - - if (i == attempts) { - return -E1000_ERR_EEPROM; - } - - /* If STM opcode located in bits 15:8 of flop, reset firmware */ - if ((flop & 0xFF00) == E1000_STM_OPCODE) { - ew32(HICR, E1000_HICR_FW_RESET); - } - - /* Perform the flash update */ - ew32(EECD, eecd | E1000_EECD_FLUPD); - - for (i=0; i < attempts; i++) { - eecd = er32(EECD); - if ((eecd & E1000_EECD_FLUPD) == 0) { - break; - } - udelay(5); - } - - if (i == attempts) { - return -E1000_ERR_EEPROM; - } - } - - if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) { - /* We're writing to the opposite bank so if we're on bank 1, - * write to bank 0 etc. We also need to erase the segment that - * is going to be written */ - if (!(er32(EECD) & E1000_EECD_SEC1VAL)) { - new_bank_offset = hw->flash_bank_size * 2; - old_bank_offset = 0; - e1000_erase_ich8_4k_segment(hw, 1); - } else { - old_bank_offset = hw->flash_bank_size * 2; - new_bank_offset = 0; - e1000_erase_ich8_4k_segment(hw, 0); - } - - sector_write_failed = false; - /* Loop for every byte in the shadow RAM, - * which is in units of words. */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - /* Determine whether to write the value stored - * in the other NVM bank or a modified value stored - * in the shadow RAM */ - if (hw->eeprom_shadow_ram[i].modified) { - low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word; - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - - if (error != E1000_SUCCESS) - sector_write_failed = true; - else { - high_byte = - (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); - udelay(100); - } - } else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &low_byte); - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - - if (error != E1000_SUCCESS) - sector_write_failed = true; - else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, - &high_byte); - udelay(100); - } - } - - /* If the write of the low byte was successful, go ahead and - * write the high byte while checking to make sure that if it - * is the signature byte, then it is handled properly */ - if (!sector_write_failed) { - /* If the word is 0x13, then make sure the signature bits - * (15:14) are 11b until the commit has completed. - * This will allow us to write 10b which indicates the - * signature is valid. We want to do this after the write - * has completed so that we don't mark the segment valid - * while the write is still in progress */ - if (i == E1000_ICH_NVM_SIG_WORD) - high_byte = E1000_ICH_NVM_SIG_MASK | high_byte; - - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset + 1, high_byte); - if (error != E1000_SUCCESS) - sector_write_failed = true; - - } else { - /* If the write failed then break from the loop and - * return an error */ - break; - } - } - - /* Don't bother writing the segment valid bits if sector - * programming failed. */ - if (!sector_write_failed) { - /* Finally validate the new segment by setting bit 15:14 - * to 10b in word 0x13 , this can be done without an - * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b */ - e1000_read_ich8_byte(hw, - E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - &high_byte); - high_byte &= 0xBF; - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); - /* And invalidate the previously valid segment by setting - * its signature word (0x13) high_byte to 0b. This can be - * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase */ - if (error == E1000_SUCCESS) { - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); - } - - /* Clear the now not used entry in the cache */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = false; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } - } - } - - return error; + DEBUGFUNC("e1000_write_eeprom_microwire"); + + /* Send the write enable command to the EEPROM (3-bit opcode plus + * 6/8-bit dummy address beginning with 11). It's less work to include + * the 11 of the dummy address as part of the opcode than it is to shift + * it over the correct number of bits for the address. This puts the + * EEPROM into write/erase mode. + */ + e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE, + (u16) (eeprom->opcode_bits + 2)); + + e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2)); + + /* Prepare the EEPROM */ + e1000_standby_eeprom(hw); + + while (words_written < words) { + /* Send the Write command (3-bit opcode + addr) */ + e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE, + eeprom->opcode_bits); + + e1000_shift_out_ee_bits(hw, (u16) (offset + words_written), + eeprom->address_bits); + + /* Send the data */ + e1000_shift_out_ee_bits(hw, data[words_written], 16); + + /* Toggle the CS line. This in effect tells the EEPROM to execute + * the previous command. + */ + e1000_standby_eeprom(hw); + + /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will + * signal that the command has been completed by raising the DO signal. + * If DO does not go high in 10 milliseconds, then error out. + */ + for (i = 0; i < 200; i++) { + eecd = er32(EECD); + if (eecd & E1000_EECD_DO) + break; + udelay(50); + } + if (i == 200) { + DEBUGOUT("EEPROM Write did not complete\n"); + return -E1000_ERR_EEPROM; + } + + /* Recover from write */ + e1000_standby_eeprom(hw); + + words_written++; + } + + /* Send the write disable command to the EEPROM (3-bit opcode plus + * 6/8-bit dummy address beginning with 10). It's less work to include + * the 10 of the dummy address as part of the opcode than it is to shift + * it over the correct number of bits for the address. This takes the + * EEPROM out of write/erase mode. + */ + e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE, + (u16) (eeprom->opcode_bits + 2)); + + e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2)); + + return E1000_SUCCESS; } -/****************************************************************************** +/** + * e1000_read_mac_addr - read the adapters MAC from eeprom + * @hw: Struct containing variables accessed by shared code + * * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the * second function of dual function devices - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + */ s32 e1000_read_mac_addr(struct e1000_hw *hw) { - u16 offset; - u16 eeprom_data, i; - - DEBUGFUNC("e1000_read_mac_addr"); - - for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { - offset = i >> 1; - if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF); - hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8); - } - - switch (hw->mac_type) { - default: - break; - case e1000_82546: - case e1000_82546_rev_3: - case e1000_82571: - case e1000_80003es2lan: - if (er32(STATUS) & E1000_STATUS_FUNC_1) - hw->perm_mac_addr[5] ^= 0x01; - break; - } - - for (i = 0; i < NODE_ADDRESS_SIZE; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return E1000_SUCCESS; + u16 offset; + u16 eeprom_data, i; + + DEBUGFUNC("e1000_read_mac_addr"); + + for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { + offset = i >> 1; + if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF); + hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8); + } + + switch (hw->mac_type) { + default: + break; + case e1000_82546: + case e1000_82546_rev_3: + if (er32(STATUS) & E1000_STATUS_FUNC_1) + hw->perm_mac_addr[5] ^= 0x01; + break; + } + + for (i = 0; i < NODE_ADDRESS_SIZE; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return E1000_SUCCESS; } -/****************************************************************************** - * Initializes receive address filters. - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_init_rx_addrs - Initializes receive address filters. + * @hw: Struct containing variables accessed by shared code * * Places the MAC address in receive address register 0 and clears the rest - * of the receive addresss registers. Clears the multicast table. Assumes + * of the receive address registers. Clears the multicast table. Assumes * the receiver is in reset when the routine is called. - *****************************************************************************/ + */ static void e1000_init_rx_addrs(struct e1000_hw *hw) { - u32 i; - u32 rar_num; - - DEBUGFUNC("e1000_init_rx_addrs"); - - /* Setup the receive address. */ - DEBUGOUT("Programming MAC Address into RAR[0]\n"); - - e1000_rar_set(hw, hw->mac_addr, 0); - - rar_num = E1000_RAR_ENTRIES; - - /* Reserve a spot for the Locally Administered Address to work around - * an 82571 issue in which a reset on one port will reload the MAC on - * the other port. */ - if ((hw->mac_type == e1000_82571) && (hw->laa_is_present)) - rar_num -= 1; - if (hw->mac_type == e1000_ich8lan) - rar_num = E1000_RAR_ENTRIES_ICH8LAN; - - /* Zero out the other 15 receive addresses. */ - DEBUGOUT("Clearing RAR[1-15]\n"); - for (i = 1; i < rar_num; i++) { - E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - E1000_WRITE_FLUSH(); - E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - E1000_WRITE_FLUSH(); - } + u32 i; + u32 rar_num; + + DEBUGFUNC("e1000_init_rx_addrs"); + + /* Setup the receive address. */ + DEBUGOUT("Programming MAC Address into RAR[0]\n"); + + e1000_rar_set(hw, hw->mac_addr, 0); + + rar_num = E1000_RAR_ENTRIES; + + /* Zero out the other 15 receive addresses. */ + DEBUGOUT("Clearing RAR[1-15]\n"); + for (i = 1; i < rar_num; i++) { + E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); + E1000_WRITE_FLUSH(); + E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); + E1000_WRITE_FLUSH(); + } } -/****************************************************************************** - * Hashes an address to determine its location in the multicast table - * - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - *****************************************************************************/ +/** + * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table + * @hw: Struct containing variables accessed by shared code + * @mc_addr: the multicast address to hash + */ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { - u32 hash_value = 0; - - /* The portion of the address that is used for the hash table is - * determined by the mc_filter_type setting. - */ - switch (hw->mc_filter_type) { - /* [0] [1] [2] [3] [4] [5] - * 01 AA 00 12 34 56 - * LSB MSB - */ - case 0: - if (hw->mac_type == e1000_ich8lan) { - /* [47:38] i.e. 0x158 for above example address */ - hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2)); - } else { - /* [47:36] i.e. 0x563 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); - } - break; - case 1: - if (hw->mac_type == e1000_ich8lan) { - /* [46:37] i.e. 0x2B1 for above example address */ - hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3)); - } else { - /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); - } - break; - case 2: - if (hw->mac_type == e1000_ich8lan) { - /*[45:36] i.e. 0x163 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); - } else { - /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); - } - break; - case 3: - if (hw->mac_type == e1000_ich8lan) { - /* [43:34] i.e. 0x18D for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); - } else { - /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); - } - break; - } - - hash_value &= 0xFFF; - if (hw->mac_type == e1000_ich8lan) - hash_value &= 0x3FF; - - return hash_value; + u32 hash_value = 0; + + /* The portion of the address that is used for the hash table is + * determined by the mc_filter_type setting. + */ + switch (hw->mc_filter_type) { + /* [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB + */ + case 0: + /* [47:36] i.e. 0x563 for above example address */ + hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); + break; + case 1: + /* [46:35] i.e. 0xAC6 for above example address */ + hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5)); + break; + case 2: + /* [45:34] i.e. 0x5D8 for above example address */ + hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); + break; + case 3: + /* [43:32] i.e. 0x634 for above example address */ + hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8)); + break; + } + + hash_value &= 0xFFF; + return hash_value; } -/****************************************************************************** - * Puts an ethernet address into a receive address register. - * - * hw - Struct containing variables accessed by shared code - * addr - Address to put into receive address register - * index - Receive address register to write - *****************************************************************************/ +/** + * e1000_rar_set - Puts an ethernet address into a receive address register. + * @hw: Struct containing variables accessed by shared code + * @addr: Address to put into receive address register + * @index: Receive address register to write + */ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) { - u32 rar_low, rar_high; - - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | - ((u32)addr[2] << 16) | ((u32)addr[3] << 24)); - rar_high = ((u32)addr[4] | ((u32)addr[5] << 8)); - - /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx - * unit hang. - * - * Description: - * If there are any Rx frames queued up or otherwise present in the HW - * before RSS is enabled, and then we enable RSS, the HW Rx unit will - * hang. To work around this issue, we have to disable receives and - * flush out all Rx frames before we enable RSS. To do so, we modify we - * redirect all Rx traffic to manageability and then reset the HW. - * This flushes away Rx frames, and (since the redirections to - * manageability persists across resets) keeps new ones from coming in - * while we work. Then, we clear the Address Valid AV bit for all MAC - * addresses and undo the re-direction to manageability. - * Now, frames are coming in again, but the MAC won't accept them, so - * far so good. We now proceed to initialize RSS (if necessary) and - * configure the Rx unit. Last, we re-enable the AV bits and continue - * on our merry way. - */ - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - if (hw->leave_av_bit_off) - break; - default: - /* Indicate to hardware the Address is Valid. */ - rar_high |= E1000_RAH_AV; - break; - } - - E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); - E1000_WRITE_FLUSH(); - E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); - E1000_WRITE_FLUSH(); + u32 rar_low, rar_high; + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx + * unit hang. + * + * Description: + * If there are any Rx frames queued up or otherwise present in the HW + * before RSS is enabled, and then we enable RSS, the HW Rx unit will + * hang. To work around this issue, we have to disable receives and + * flush out all Rx frames before we enable RSS. To do so, we modify we + * redirect all Rx traffic to manageability and then reset the HW. + * This flushes away Rx frames, and (since the redirections to + * manageability persists across resets) keeps new ones from coming in + * while we work. Then, we clear the Address Valid AV bit for all MAC + * addresses and undo the re-direction to manageability. + * Now, frames are coming in again, but the MAC won't accept them, so + * far so good. We now proceed to initialize RSS (if necessary) and + * configure the Rx unit. Last, we re-enable the AV bits and continue + * on our merry way. + */ + switch (hw->mac_type) { + default: + /* Indicate to hardware the Address is Valid. */ + rar_high |= E1000_RAH_AV; + break; + } + + E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); + E1000_WRITE_FLUSH(); + E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); + E1000_WRITE_FLUSH(); } -/****************************************************************************** - * Writes a value to the specified offset in the VLAN filter table. - * - * hw - Struct containing variables accessed by shared code - * offset - Offset in VLAN filer table to write - * value - Value to write into VLAN filter table - *****************************************************************************/ +/** + * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table. + * @hw: Struct containing variables accessed by shared code + * @offset: Offset in VLAN filer table to write + * @value: Value to write into VLAN filter table + */ void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) { - u32 temp; - - if (hw->mac_type == e1000_ich8lan) - return; - - if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { - temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); - E1000_WRITE_FLUSH(); - E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp); - E1000_WRITE_FLUSH(); - } else { - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); - E1000_WRITE_FLUSH(); - } + u32 temp; + + if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { + temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); + E1000_WRITE_FLUSH(); + E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp); + E1000_WRITE_FLUSH(); + } else { + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); + E1000_WRITE_FLUSH(); + } } -/****************************************************************************** - * Clears the VLAN filer table - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_clear_vfta - Clears the VLAN filer table + * @hw: Struct containing variables accessed by shared code + */ static void e1000_clear_vfta(struct e1000_hw *hw) { - u32 offset; - u32 vfta_value = 0; - u32 vfta_offset = 0; - u32 vfta_bit_in_reg = 0; - - if (hw->mac_type == e1000_ich8lan) - return; - - if (hw->mac_type == e1000_82573) { - if (hw->mng_cookie.vlan_id != 0) { - /* The VFTA is a 4096b bit-field, each identifying a single VLAN - * ID. The following operations determine which 32b entry - * (i.e. offset) into the array we want to set the VLAN ID - * (i.e. bit) of the manageability unit. */ - vfta_offset = (hw->mng_cookie.vlan_id >> - E1000_VFTA_ENTRY_SHIFT) & - E1000_VFTA_ENTRY_MASK; - vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & - E1000_VFTA_ENTRY_BIT_SHIFT_MASK); - } - } - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - /* If the offset we want to clear is the same offset of the - * manageability VLAN ID, then clear all bits except that of the - * manageability unit */ - vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); - E1000_WRITE_FLUSH(); - } + u32 offset; + u32 vfta_value = 0; + u32 vfta_offset = 0; + u32 vfta_bit_in_reg = 0; + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of the + * manageability unit */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); + E1000_WRITE_FLUSH(); + } } static s32 e1000_id_led_init(struct e1000_hw *hw) { - u32 ledctl; - const u32 ledctl_mask = 0x000000FF; - const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; - const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; - u16 eeprom_data, i, temp; - const u16 led_mask = 0x0F; - - DEBUGFUNC("e1000_id_led_init"); - - if (hw->mac_type < e1000_82540) { - /* Nothing to do */ - return E1000_SUCCESS; - } - - ledctl = er32(LEDCTL); - hw->ledctl_default = ledctl; - hw->ledctl_mode1 = hw->ledctl_default; - hw->ledctl_mode2 = hw->ledctl_default; - - if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - - if ((hw->mac_type == e1000_82573) && - (eeprom_data == ID_LED_RESERVED_82573)) - eeprom_data = ID_LED_DEFAULT_82573; - else if ((eeprom_data == ID_LED_RESERVED_0000) || - (eeprom_data == ID_LED_RESERVED_FFFF)) { - if (hw->mac_type == e1000_ich8lan) - eeprom_data = ID_LED_DEFAULT_ICH8LAN; - else - eeprom_data = ID_LED_DEFAULT; - } - - for (i = 0; i < 4; i++) { - temp = (eeprom_data >> (i << 2)) & led_mask; - switch (temp) { - case ID_LED_ON1_DEF2: - case ID_LED_ON1_ON2: - case ID_LED_ON1_OFF2: - hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode1 |= ledctl_on << (i << 3); - break; - case ID_LED_OFF1_DEF2: - case ID_LED_OFF1_ON2: - case ID_LED_OFF1_OFF2: - hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode1 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - switch (temp) { - case ID_LED_DEF1_ON2: - case ID_LED_ON1_ON2: - case ID_LED_OFF1_ON2: - hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode2 |= ledctl_on << (i << 3); - break; - case ID_LED_DEF1_OFF2: - case ID_LED_ON1_OFF2: - case ID_LED_OFF1_OFF2: - hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - hw->ledctl_mode2 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - } - return E1000_SUCCESS; + u32 ledctl; + const u32 ledctl_mask = 0x000000FF; + const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; + const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; + u16 eeprom_data, i, temp; + const u16 led_mask = 0x0F; + + DEBUGFUNC("e1000_id_led_init"); + + if (hw->mac_type < e1000_82540) { + /* Nothing to do */ + return E1000_SUCCESS; + } + + ledctl = er32(LEDCTL); + hw->ledctl_default = ledctl; + hw->ledctl_mode1 = hw->ledctl_default; + hw->ledctl_mode2 = hw->ledctl_default; + + if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + + if ((eeprom_data == ID_LED_RESERVED_0000) || + (eeprom_data == ID_LED_RESERVED_FFFF)) { + eeprom_data = ID_LED_DEFAULT; + } + + for (i = 0; i < 4; i++) { + temp = (eeprom_data >> (i << 2)) & led_mask; + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode1 |= ledctl_on << (i << 3); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode1 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode2 |= ledctl_on << (i << 3); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + hw->ledctl_mode2 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + } + return E1000_SUCCESS; } -/****************************************************************************** - * Prepares SW controlable LED for use and saves the current state of the LED. +/** + * e1000_setup_led + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Prepares SW controlable LED for use and saves the current state of the LED. + */ s32 e1000_setup_led(struct e1000_hw *hw) { - u32 ledctl; - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_setup_led"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - /* No setup necessary */ - break; - case e1000_82541: - case e1000_82547: - case e1000_82541_rev_2: - case e1000_82547_rev_2: - /* Turn off PHY Smart Power Down (if enabled) */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, - &hw->phy_spd_default); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, - (u16)(hw->phy_spd_default & - ~IGP01E1000_GMII_SPD)); - if (ret_val) - return ret_val; - /* Fall Through */ - default: - if (hw->media_type == e1000_media_type_fiber) { - ledctl = er32(LEDCTL); - /* Save current LEDCTL settings */ - hw->ledctl_default = ledctl; - /* Turn off LED0 */ - ledctl &= ~(E1000_LEDCTL_LED0_IVRT | - E1000_LEDCTL_LED0_BLINK | - E1000_LEDCTL_LED0_MODE_MASK); - ledctl |= (E1000_LEDCTL_MODE_LED_OFF << - E1000_LEDCTL_LED0_MODE_SHIFT); - ew32(LEDCTL, ledctl); - } else if (hw->media_type == e1000_media_type_copper) - ew32(LEDCTL, hw->ledctl_mode1); - break; - } - - return E1000_SUCCESS; -} + u32 ledctl; + s32 ret_val = E1000_SUCCESS; + DEBUGFUNC("e1000_setup_led"); -/****************************************************************************** - * Used on 82571 and later Si that has LED blink bits. - * Callers must use their own timer and should have already called - * e1000_id_led_init() - * Call e1000_cleanup led() to stop blinking - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -s32 e1000_blink_led_start(struct e1000_hw *hw) -{ - s16 i; - u32 ledctl_blink = 0; - - DEBUGFUNC("e1000_id_led_blink_on"); - - if (hw->mac_type < e1000_82571) { - /* Nothing to do */ - return E1000_SUCCESS; - } - if (hw->media_type == e1000_media_type_fiber) { - /* always blink LED0 for PCI-E fiber */ - ledctl_blink = E1000_LEDCTL_LED0_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); - } else { - /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */ - ledctl_blink = hw->ledctl_mode2; - for (i=0; i < 4; i++) - if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) == - E1000_LEDCTL_MODE_LED_ON) - ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8)); - } - - ew32(LEDCTL, ledctl_blink); - - return E1000_SUCCESS; + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + /* No setup necessary */ + break; + case e1000_82541: + case e1000_82547: + case e1000_82541_rev_2: + case e1000_82547_rev_2: + /* Turn off PHY Smart Power Down (if enabled) */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, + &hw->phy_spd_default); + if (ret_val) + return ret_val; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + (u16) (hw->phy_spd_default & + ~IGP01E1000_GMII_SPD)); + if (ret_val) + return ret_val; + /* Fall Through */ + default: + if (hw->media_type == e1000_media_type_fiber) { + ledctl = er32(LEDCTL); + /* Save current LEDCTL settings */ + hw->ledctl_default = ledctl; + /* Turn off LED0 */ + ledctl &= ~(E1000_LEDCTL_LED0_IVRT | + E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_LED0_MODE_MASK); + ledctl |= (E1000_LEDCTL_MODE_LED_OFF << + E1000_LEDCTL_LED0_MODE_SHIFT); + ew32(LEDCTL, ledctl); + } else if (hw->media_type == e1000_media_type_copper) + ew32(LEDCTL, hw->ledctl_mode1); + break; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Restores the saved state of the SW controlable LED. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_cleanup_led - Restores the saved state of the SW controlable LED. + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_cleanup_led(struct e1000_hw *hw) { - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_cleanup_led"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - case e1000_82544: - /* No cleanup necessary */ - break; - case e1000_82541: - case e1000_82547: - case e1000_82541_rev_2: - case e1000_82547_rev_2: - /* Turn on PHY Smart Power Down (if previously enabled) */ - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, - hw->phy_spd_default); - if (ret_val) - return ret_val; - /* Fall Through */ - default: - if (hw->phy_type == e1000_phy_ife) { - e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); - break; - } - /* Restore LEDCTL settings */ - ew32(LEDCTL, hw->ledctl_default); - break; - } - - return E1000_SUCCESS; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_cleanup_led"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + case e1000_82544: + /* No cleanup necessary */ + break; + case e1000_82541: + case e1000_82547: + case e1000_82541_rev_2: + case e1000_82547_rev_2: + /* Turn on PHY Smart Power Down (if previously enabled) */ + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + hw->phy_spd_default); + if (ret_val) + return ret_val; + /* Fall Through */ + default: + /* Restore LEDCTL settings */ + ew32(LEDCTL, hw->ledctl_default); + break; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Turns on the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_led_on - Turns on the software controllable LED + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_led_on(struct e1000_hw *hw) { - u32 ctrl = er32(CTRL); - - DEBUGFUNC("e1000_led_on"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - /* Set SW Defineable Pin 0 to turn on the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - break; - case e1000_82544: - if (hw->media_type == e1000_media_type_fiber) { - /* Set SW Defineable Pin 0 to turn on the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else { - /* Clear SW Defineable Pin 0 to turn on the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } - break; - default: - if (hw->media_type == e1000_media_type_fiber) { - /* Clear SW Defineable Pin 0 to turn on the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else if (hw->phy_type == e1000_phy_ife) { - e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, - (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON)); - } else if (hw->media_type == e1000_media_type_copper) { - ew32(LEDCTL, hw->ledctl_mode2); - return E1000_SUCCESS; - } - break; - } - - ew32(CTRL, ctrl); - - return E1000_SUCCESS; + u32 ctrl = er32(CTRL); + + DEBUGFUNC("e1000_led_on"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + /* Set SW Defineable Pin 0 to turn on the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + break; + case e1000_82544: + if (hw->media_type == e1000_media_type_fiber) { + /* Set SW Defineable Pin 0 to turn on the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else { + /* Clear SW Defineable Pin 0 to turn on the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } + break; + default: + if (hw->media_type == e1000_media_type_fiber) { + /* Clear SW Defineable Pin 0 to turn on the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else if (hw->media_type == e1000_media_type_copper) { + ew32(LEDCTL, hw->ledctl_mode2); + return E1000_SUCCESS; + } + break; + } + + ew32(CTRL, ctrl); + + return E1000_SUCCESS; } -/****************************************************************************** - * Turns off the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_led_off - Turns off the software controllable LED + * @hw: Struct containing variables accessed by shared code + */ s32 e1000_led_off(struct e1000_hw *hw) { - u32 ctrl = er32(CTRL); - - DEBUGFUNC("e1000_led_off"); - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - case e1000_82543: - /* Clear SW Defineable Pin 0 to turn off the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - break; - case e1000_82544: - if (hw->media_type == e1000_media_type_fiber) { - /* Clear SW Defineable Pin 0 to turn off the LED */ - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else { - /* Set SW Defineable Pin 0 to turn off the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } - break; - default: - if (hw->media_type == e1000_media_type_fiber) { - /* Set SW Defineable Pin 0 to turn off the LED */ - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - } else if (hw->phy_type == e1000_phy_ife) { - e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, - (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF)); - } else if (hw->media_type == e1000_media_type_copper) { - ew32(LEDCTL, hw->ledctl_mode1); - return E1000_SUCCESS; - } - break; - } - - ew32(CTRL, ctrl); - - return E1000_SUCCESS; + u32 ctrl = er32(CTRL); + + DEBUGFUNC("e1000_led_off"); + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + case e1000_82543: + /* Clear SW Defineable Pin 0 to turn off the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + break; + case e1000_82544: + if (hw->media_type == e1000_media_type_fiber) { + /* Clear SW Defineable Pin 0 to turn off the LED */ + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else { + /* Set SW Defineable Pin 0 to turn off the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } + break; + default: + if (hw->media_type == e1000_media_type_fiber) { + /* Set SW Defineable Pin 0 to turn off the LED */ + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + } else if (hw->media_type == e1000_media_type_copper) { + ew32(LEDCTL, hw->ledctl_mode1); + return E1000_SUCCESS; + } + break; + } + + ew32(CTRL, ctrl); + + return E1000_SUCCESS; } -/****************************************************************************** - * Clears all hardware statistics counters. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ +/** + * e1000_clear_hw_cntrs - Clears all hardware statistics counters. + * @hw: Struct containing variables accessed by shared code + */ static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { - volatile u32 temp; - - temp = er32(CRCERRS); - temp = er32(SYMERRS); - temp = er32(MPC); - temp = er32(SCC); - temp = er32(ECOL); - temp = er32(MCC); - temp = er32(LATECOL); - temp = er32(COLC); - temp = er32(DC); - temp = er32(SEC); - temp = er32(RLEC); - temp = er32(XONRXC); - temp = er32(XONTXC); - temp = er32(XOFFRXC); - temp = er32(XOFFTXC); - temp = er32(FCRUC); - - if (hw->mac_type != e1000_ich8lan) { - temp = er32(PRC64); - temp = er32(PRC127); - temp = er32(PRC255); - temp = er32(PRC511); - temp = er32(PRC1023); - temp = er32(PRC1522); - } - - temp = er32(GPRC); - temp = er32(BPRC); - temp = er32(MPRC); - temp = er32(GPTC); - temp = er32(GORCL); - temp = er32(GORCH); - temp = er32(GOTCL); - temp = er32(GOTCH); - temp = er32(RNBC); - temp = er32(RUC); - temp = er32(RFC); - temp = er32(ROC); - temp = er32(RJC); - temp = er32(TORL); - temp = er32(TORH); - temp = er32(TOTL); - temp = er32(TOTH); - temp = er32(TPR); - temp = er32(TPT); - - if (hw->mac_type != e1000_ich8lan) { - temp = er32(PTC64); - temp = er32(PTC127); - temp = er32(PTC255); - temp = er32(PTC511); - temp = er32(PTC1023); - temp = er32(PTC1522); - } - - temp = er32(MPTC); - temp = er32(BPTC); - - if (hw->mac_type < e1000_82543) return; - - temp = er32(ALGNERRC); - temp = er32(RXERRC); - temp = er32(TNCRS); - temp = er32(CEXTERR); - temp = er32(TSCTC); - temp = er32(TSCTFC); - - if (hw->mac_type <= e1000_82544) return; - - temp = er32(MGTPRC); - temp = er32(MGTPDC); - temp = er32(MGTPTC); - - if (hw->mac_type <= e1000_82547_rev_2) return; - - temp = er32(IAC); - temp = er32(ICRXOC); - - if (hw->mac_type == e1000_ich8lan) return; - - temp = er32(ICRXPTC); - temp = er32(ICRXATC); - temp = er32(ICTXPTC); - temp = er32(ICTXATC); - temp = er32(ICTXQEC); - temp = er32(ICTXQMTC); - temp = er32(ICRXDMTC); -} - -/****************************************************************************** - * Resets Adaptive IFS to its default state. - * - * hw - Struct containing variables accessed by shared code + volatile u32 temp; + + temp = er32(CRCERRS); + temp = er32(SYMERRS); + temp = er32(MPC); + temp = er32(SCC); + temp = er32(ECOL); + temp = er32(MCC); + temp = er32(LATECOL); + temp = er32(COLC); + temp = er32(DC); + temp = er32(SEC); + temp = er32(RLEC); + temp = er32(XONRXC); + temp = er32(XONTXC); + temp = er32(XOFFRXC); + temp = er32(XOFFTXC); + temp = er32(FCRUC); + + temp = er32(PRC64); + temp = er32(PRC127); + temp = er32(PRC255); + temp = er32(PRC511); + temp = er32(PRC1023); + temp = er32(PRC1522); + + temp = er32(GPRC); + temp = er32(BPRC); + temp = er32(MPRC); + temp = er32(GPTC); + temp = er32(GORCL); + temp = er32(GORCH); + temp = er32(GOTCL); + temp = er32(GOTCH); + temp = er32(RNBC); + temp = er32(RUC); + temp = er32(RFC); + temp = er32(ROC); + temp = er32(RJC); + temp = er32(TORL); + temp = er32(TORH); + temp = er32(TOTL); + temp = er32(TOTH); + temp = er32(TPR); + temp = er32(TPT); + + temp = er32(PTC64); + temp = er32(PTC127); + temp = er32(PTC255); + temp = er32(PTC511); + temp = er32(PTC1023); + temp = er32(PTC1522); + + temp = er32(MPTC); + temp = er32(BPTC); + + if (hw->mac_type < e1000_82543) + return; + + temp = er32(ALGNERRC); + temp = er32(RXERRC); + temp = er32(TNCRS); + temp = er32(CEXTERR); + temp = er32(TSCTC); + temp = er32(TSCTFC); + + if (hw->mac_type <= e1000_82544) + return; + + temp = er32(MGTPRC); + temp = er32(MGTPDC); + temp = er32(MGTPTC); +} + +/** + * e1000_reset_adaptive - Resets Adaptive IFS to its default state. + * @hw: Struct containing variables accessed by shared code * * Call this after e1000_init_hw. You may override the IFS defaults by setting * hw->ifs_params_forced to true. However, you must initialize hw-> * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio * before calling this function. - *****************************************************************************/ + */ void e1000_reset_adaptive(struct e1000_hw *hw) { - DEBUGFUNC("e1000_reset_adaptive"); - - if (hw->adaptive_ifs) { - if (!hw->ifs_params_forced) { - hw->current_ifs_val = 0; - hw->ifs_min_val = IFS_MIN; - hw->ifs_max_val = IFS_MAX; - hw->ifs_step_size = IFS_STEP; - hw->ifs_ratio = IFS_RATIO; - } - hw->in_ifs_mode = false; - ew32(AIT, 0); - } else { - DEBUGOUT("Not in Adaptive IFS mode!\n"); - } + DEBUGFUNC("e1000_reset_adaptive"); + + if (hw->adaptive_ifs) { + if (!hw->ifs_params_forced) { + hw->current_ifs_val = 0; + hw->ifs_min_val = IFS_MIN; + hw->ifs_max_val = IFS_MAX; + hw->ifs_step_size = IFS_STEP; + hw->ifs_ratio = IFS_RATIO; + } + hw->in_ifs_mode = false; + ew32(AIT, 0); + } else { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + } } -/****************************************************************************** +/** + * e1000_update_adaptive - update adaptive IFS + * @hw: Struct containing variables accessed by shared code + * @tx_packets: Number of transmits since last callback + * @total_collisions: Number of collisions since last callback + * * Called during the callback/watchdog routine to update IFS value based on * the ratio of transmits to collisions. - * - * hw - Struct containing variables accessed by shared code - * tx_packets - Number of transmits since last callback - * total_collisions - Number of collisions since last callback - *****************************************************************************/ + */ void e1000_update_adaptive(struct e1000_hw *hw) { - DEBUGFUNC("e1000_update_adaptive"); - - if (hw->adaptive_ifs) { - if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) { - if (hw->tx_packet_delta > MIN_NUM_XMITS) { - hw->in_ifs_mode = true; - if (hw->current_ifs_val < hw->ifs_max_val) { - if (hw->current_ifs_val == 0) - hw->current_ifs_val = hw->ifs_min_val; - else - hw->current_ifs_val += hw->ifs_step_size; - ew32(AIT, hw->current_ifs_val); - } - } - } else { - if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { - hw->current_ifs_val = 0; - hw->in_ifs_mode = false; - ew32(AIT, 0); - } - } - } else { - DEBUGOUT("Not in Adaptive IFS mode!\n"); - } + DEBUGFUNC("e1000_update_adaptive"); + + if (hw->adaptive_ifs) { + if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) { + if (hw->tx_packet_delta > MIN_NUM_XMITS) { + hw->in_ifs_mode = true; + if (hw->current_ifs_val < hw->ifs_max_val) { + if (hw->current_ifs_val == 0) + hw->current_ifs_val = + hw->ifs_min_val; + else + hw->current_ifs_val += + hw->ifs_step_size; + ew32(AIT, hw->current_ifs_val); + } + } + } else { + if (hw->in_ifs_mode + && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { + hw->current_ifs_val = 0; + hw->in_ifs_mode = false; + ew32(AIT, 0); + } + } + } else { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + } } -/****************************************************************************** - * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT +/** + * e1000_tbi_adjust_stats + * @hw: Struct containing variables accessed by shared code + * @frame_len: The length of the frame in question + * @mac_addr: The Ethernet destination address of the frame in question * - * hw - Struct containing variables accessed by shared code - * frame_len - The length of the frame in question - * mac_addr - The Ethernet destination address of the frame in question - *****************************************************************************/ + * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT + */ void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 *mac_addr) { - u64 carry_bit; - - /* First adjust the frame length. */ - frame_len--; - /* We need to adjust the statistics counters, since the hardware - * counters overcount this packet as a CRC error and undercount - * the packet as a good packet - */ - /* This packet should not be counted as a CRC error. */ - stats->crcerrs--; - /* This packet does count as a Good Packet Received. */ - stats->gprc++; - - /* Adjust the Good Octets received counters */ - carry_bit = 0x80000000 & stats->gorcl; - stats->gorcl += frame_len; - /* If the high bit of Gorcl (the low 32 bits of the Good Octets - * Received Count) was one before the addition, - * AND it is zero after, then we lost the carry out, - * need to add one to Gorch (Good Octets Received Count High). - * This could be simplified if all environments supported - * 64-bit integers. - */ - if (carry_bit && ((stats->gorcl & 0x80000000) == 0)) - stats->gorch++; - /* Is this a broadcast or multicast? Check broadcast first, - * since the test for a multicast frame will test positive on - * a broadcast frame. - */ - if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff)) - /* Broadcast packet */ - stats->bprc++; - else if (*mac_addr & 0x01) - /* Multicast packet */ - stats->mprc++; - - if (frame_len == hw->max_frame_size) { - /* In this case, the hardware has overcounted the number of - * oversize frames. - */ - if (stats->roc > 0) - stats->roc--; - } - - /* Adjust the bin counters when the extra byte put the frame in the - * wrong bin. Remember that the frame_len was adjusted above. - */ - if (frame_len == 64) { - stats->prc64++; - stats->prc127--; - } else if (frame_len == 127) { - stats->prc127++; - stats->prc255--; - } else if (frame_len == 255) { - stats->prc255++; - stats->prc511--; - } else if (frame_len == 511) { - stats->prc511++; - stats->prc1023--; - } else if (frame_len == 1023) { - stats->prc1023++; - stats->prc1522--; - } else if (frame_len == 1522) { - stats->prc1522++; - } + u64 carry_bit; + + /* First adjust the frame length. */ + frame_len--; + /* We need to adjust the statistics counters, since the hardware + * counters overcount this packet as a CRC error and undercount + * the packet as a good packet + */ + /* This packet should not be counted as a CRC error. */ + stats->crcerrs--; + /* This packet does count as a Good Packet Received. */ + stats->gprc++; + + /* Adjust the Good Octets received counters */ + carry_bit = 0x80000000 & stats->gorcl; + stats->gorcl += frame_len; + /* If the high bit of Gorcl (the low 32 bits of the Good Octets + * Received Count) was one before the addition, + * AND it is zero after, then we lost the carry out, + * need to add one to Gorch (Good Octets Received Count High). + * This could be simplified if all environments supported + * 64-bit integers. + */ + if (carry_bit && ((stats->gorcl & 0x80000000) == 0)) + stats->gorch++; + /* Is this a broadcast or multicast? Check broadcast first, + * since the test for a multicast frame will test positive on + * a broadcast frame. + */ + if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff)) + /* Broadcast packet */ + stats->bprc++; + else if (*mac_addr & 0x01) + /* Multicast packet */ + stats->mprc++; + + if (frame_len == hw->max_frame_size) { + /* In this case, the hardware has overcounted the number of + * oversize frames. + */ + if (stats->roc > 0) + stats->roc--; + } + + /* Adjust the bin counters when the extra byte put the frame in the + * wrong bin. Remember that the frame_len was adjusted above. + */ + if (frame_len == 64) { + stats->prc64++; + stats->prc127--; + } else if (frame_len == 127) { + stats->prc127++; + stats->prc255--; + } else if (frame_len == 255) { + stats->prc255++; + stats->prc511--; + } else if (frame_len == 511) { + stats->prc511++; + stats->prc1023--; + } else if (frame_len == 1023) { + stats->prc1023++; + stats->prc1522--; + } else if (frame_len == 1522) { + stats->prc1522++; + } } -/****************************************************************************** - * Gets the current PCI bus type, speed, and width of the hardware +/** + * e1000_get_bus_info + * @hw: Struct containing variables accessed by shared code * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ + * Gets the current PCI bus type, speed, and width of the hardware + */ void e1000_get_bus_info(struct e1000_hw *hw) { - s32 ret_val; - u16 pci_ex_link_status; - u32 status; - - switch (hw->mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: - hw->bus_type = e1000_bus_type_pci; - hw->bus_speed = e1000_bus_speed_unknown; - hw->bus_width = e1000_bus_width_unknown; - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - hw->bus_type = e1000_bus_type_pci_express; - hw->bus_speed = e1000_bus_speed_2500; - ret_val = e1000_read_pcie_cap_reg(hw, - PCI_EX_LINK_STATUS, - &pci_ex_link_status); - if (ret_val) - hw->bus_width = e1000_bus_width_unknown; - else - hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >> - PCI_EX_LINK_WIDTH_SHIFT; - break; - case e1000_ich8lan: - hw->bus_type = e1000_bus_type_pci_express; - hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_1; - break; - default: - status = er32(STATUS); - hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? - e1000_bus_type_pcix : e1000_bus_type_pci; - - if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) { - hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ? - e1000_bus_speed_66 : e1000_bus_speed_120; - } else if (hw->bus_type == e1000_bus_type_pci) { - hw->bus_speed = (status & E1000_STATUS_PCI66) ? - e1000_bus_speed_66 : e1000_bus_speed_33; - } else { - switch (status & E1000_STATUS_PCIX_SPEED) { - case E1000_STATUS_PCIX_SPEED_66: - hw->bus_speed = e1000_bus_speed_66; - break; - case E1000_STATUS_PCIX_SPEED_100: - hw->bus_speed = e1000_bus_speed_100; - break; - case E1000_STATUS_PCIX_SPEED_133: - hw->bus_speed = e1000_bus_speed_133; - break; - default: - hw->bus_speed = e1000_bus_speed_reserved; - break; - } - } - hw->bus_width = (status & E1000_STATUS_BUS64) ? - e1000_bus_width_64 : e1000_bus_width_32; - break; - } + u32 status; + + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + hw->bus_type = e1000_bus_type_pci; + hw->bus_speed = e1000_bus_speed_unknown; + hw->bus_width = e1000_bus_width_unknown; + break; + default: + status = er32(STATUS); + hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? + e1000_bus_type_pcix : e1000_bus_type_pci; + + if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) { + hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ? + e1000_bus_speed_66 : e1000_bus_speed_120; + } else if (hw->bus_type == e1000_bus_type_pci) { + hw->bus_speed = (status & E1000_STATUS_PCI66) ? + e1000_bus_speed_66 : e1000_bus_speed_33; + } else { + switch (status & E1000_STATUS_PCIX_SPEED) { + case E1000_STATUS_PCIX_SPEED_66: + hw->bus_speed = e1000_bus_speed_66; + break; + case E1000_STATUS_PCIX_SPEED_100: + hw->bus_speed = e1000_bus_speed_100; + break; + case E1000_STATUS_PCIX_SPEED_133: + hw->bus_speed = e1000_bus_speed_133; + break; + default: + hw->bus_speed = e1000_bus_speed_reserved; + break; + } + } + hw->bus_width = (status & E1000_STATUS_BUS64) ? + e1000_bus_width_64 : e1000_bus_width_32; + break; + } } -/****************************************************************************** +/** + * e1000_write_reg_io + * @hw: Struct containing variables accessed by shared code + * @offset: offset to write to + * @value: value to write + * * Writes a value to one of the devices registers using port I/O (as opposed to * memory mapped I/O). Only 82544 and newer devices support port I/O. - * - * hw - Struct containing variables accessed by shared code - * offset - offset to write to - * value - value to write - *****************************************************************************/ + */ static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value) { - unsigned long io_addr = hw->io_base; - unsigned long io_data = hw->io_base + 4; + unsigned long io_addr = hw->io_base; + unsigned long io_data = hw->io_base + 4; - e1000_io_write(hw, io_addr, offset); - e1000_io_write(hw, io_data, value); + e1000_io_write(hw, io_addr, offset); + e1000_io_write(hw, io_data, value); } -/****************************************************************************** - * Estimates the cable length. - * - * hw - Struct containing variables accessed by shared code - * min_length - The estimated minimum length - * max_length - The estimated maximum length +/** + * e1000_get_cable_length - Estimates the cable length. + * @hw: Struct containing variables accessed by shared code + * @min_length: The estimated minimum length + * @max_length: The estimated maximum length * * returns: - E1000_ERR_XXX * E1000_SUCCESS @@ -6528,185 +4842,115 @@ static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value) * So for M88 phy's, this function interprets the one value returned from the * register to the minimum and maximum range. * For IGP phy's, the function calculates the range by the AGC registers. - *****************************************************************************/ + */ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length) { - s32 ret_val; - u16 agc_value = 0; - u16 i, phy_data; - u16 cable_length; - - DEBUGFUNC("e1000_get_cable_length"); - - *min_length = *max_length = 0; - - /* Use old method for Phy older than IGP */ - if (hw->phy_type == e1000_phy_m88) { - - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if (ret_val) - return ret_val; - cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; - - /* Convert the enum value to ranged values */ - switch (cable_length) { - case e1000_cable_length_50: - *min_length = 0; - *max_length = e1000_igp_cable_length_50; - break; - case e1000_cable_length_50_80: - *min_length = e1000_igp_cable_length_50; - *max_length = e1000_igp_cable_length_80; - break; - case e1000_cable_length_80_110: - *min_length = e1000_igp_cable_length_80; - *max_length = e1000_igp_cable_length_110; - break; - case e1000_cable_length_110_140: - *min_length = e1000_igp_cable_length_110; - *max_length = e1000_igp_cable_length_140; - break; - case e1000_cable_length_140: - *min_length = e1000_igp_cable_length_140; - *max_length = e1000_igp_cable_length_170; - break; - default: - return -E1000_ERR_PHY; - break; - } - } else if (hw->phy_type == e1000_phy_gg82563) { - ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, - &phy_data); - if (ret_val) - return ret_val; - cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH; - - switch (cable_length) { - case e1000_gg_cable_length_60: - *min_length = 0; - *max_length = e1000_igp_cable_length_60; - break; - case e1000_gg_cable_length_60_115: - *min_length = e1000_igp_cable_length_60; - *max_length = e1000_igp_cable_length_115; - break; - case e1000_gg_cable_length_115_150: - *min_length = e1000_igp_cable_length_115; - *max_length = e1000_igp_cable_length_150; - break; - case e1000_gg_cable_length_150: - *min_length = e1000_igp_cable_length_150; - *max_length = e1000_igp_cable_length_180; - break; - default: - return -E1000_ERR_PHY; - break; - } - } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ - u16 cur_agc_value; - u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; - u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - {IGP01E1000_PHY_AGC_A, - IGP01E1000_PHY_AGC_B, - IGP01E1000_PHY_AGC_C, - IGP01E1000_PHY_AGC_D}; - /* Read the AGC registers for all channels */ - for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - - ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; - - /* Value bound check. */ - if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) || - (cur_agc_value == 0)) - return -E1000_ERR_PHY; - - agc_value += cur_agc_value; - - /* Update minimal AGC value. */ - if (min_agc_value > cur_agc_value) - min_agc_value = cur_agc_value; - } - - /* Remove the minimal AGC result for length < 50m */ - if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) { - agc_value -= min_agc_value; - - /* Get the average length of the remaining 3 channels */ - agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1); - } else { - /* Get the average length of all the 4 channels. */ - agc_value /= IGP01E1000_PHY_CHANNEL_NUM; - } - - /* Set the range of the calculated length. */ - *min_length = ((e1000_igp_cable_length_table[agc_value] - - IGP01E1000_AGC_RANGE) > 0) ? - (e1000_igp_cable_length_table[agc_value] - - IGP01E1000_AGC_RANGE) : 0; - *max_length = e1000_igp_cable_length_table[agc_value] + - IGP01E1000_AGC_RANGE; - } else if (hw->phy_type == e1000_phy_igp_2 || - hw->phy_type == e1000_phy_igp_3) { - u16 cur_agc_index, max_agc_index = 0; - u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1; - u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = - {IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D}; - /* Read the AGC registers for all channels */ - for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - /* Getting bits 15:9, which represent the combination of course and - * fine gain values. The result is a number that can be put into - * the lookup table to obtain the approximate cable length. */ - cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & - IGP02E1000_AGC_LENGTH_MASK; - - /* Array index bound check. */ - if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) || - (cur_agc_index == 0)) - return -E1000_ERR_PHY; - - /* Remove min & max AGC values from calculation. */ - if (e1000_igp_2_cable_length_table[min_agc_index] > - e1000_igp_2_cable_length_table[cur_agc_index]) - min_agc_index = cur_agc_index; - if (e1000_igp_2_cable_length_table[max_agc_index] < - e1000_igp_2_cable_length_table[cur_agc_index]) - max_agc_index = cur_agc_index; - - agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; - } - - agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + - e1000_igp_2_cable_length_table[max_agc_index]); - agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); - - /* Calculate cable length with the error range of +/- 10 meters. */ - *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? - (agc_value - IGP02E1000_AGC_RANGE) : 0; - *max_length = agc_value + IGP02E1000_AGC_RANGE; - } - - return E1000_SUCCESS; + s32 ret_val; + u16 agc_value = 0; + u16 i, phy_data; + u16 cable_length; + + DEBUGFUNC("e1000_get_cable_length"); + + *min_length = *max_length = 0; + + /* Use old method for Phy older than IGP */ + if (hw->phy_type == e1000_phy_m88) { + + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; + cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + + /* Convert the enum value to ranged values */ + switch (cable_length) { + case e1000_cable_length_50: + *min_length = 0; + *max_length = e1000_igp_cable_length_50; + break; + case e1000_cable_length_50_80: + *min_length = e1000_igp_cable_length_50; + *max_length = e1000_igp_cable_length_80; + break; + case e1000_cable_length_80_110: + *min_length = e1000_igp_cable_length_80; + *max_length = e1000_igp_cable_length_110; + break; + case e1000_cable_length_110_140: + *min_length = e1000_igp_cable_length_110; + *max_length = e1000_igp_cable_length_140; + break; + case e1000_cable_length_140: + *min_length = e1000_igp_cable_length_140; + *max_length = e1000_igp_cable_length_170; + break; + default: + return -E1000_ERR_PHY; + break; + } + } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ + u16 cur_agc_value; + u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = + { IGP01E1000_PHY_AGC_A, + IGP01E1000_PHY_AGC_B, + IGP01E1000_PHY_AGC_C, + IGP01E1000_PHY_AGC_D + }; + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + + ret_val = + e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; + + /* Value bound check. */ + if ((cur_agc_value >= + IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) + || (cur_agc_value == 0)) + return -E1000_ERR_PHY; + + agc_value += cur_agc_value; + + /* Update minimal AGC value. */ + if (min_agc_value > cur_agc_value) + min_agc_value = cur_agc_value; + } + + /* Remove the minimal AGC result for length < 50m */ + if (agc_value < + IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) { + agc_value -= min_agc_value; + + /* Get the average length of the remaining 3 channels */ + agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1); + } else { + /* Get the average length of all the 4 channels. */ + agc_value /= IGP01E1000_PHY_CHANNEL_NUM; + } + + /* Set the range of the calculated length. */ + *min_length = ((e1000_igp_cable_length_table[agc_value] - + IGP01E1000_AGC_RANGE) > 0) ? + (e1000_igp_cable_length_table[agc_value] - + IGP01E1000_AGC_RANGE) : 0; + *max_length = e1000_igp_cable_length_table[agc_value] + + IGP01E1000_AGC_RANGE; + } + + return E1000_SUCCESS; } -/****************************************************************************** - * Check the cable polarity - * - * hw - Struct containing variables accessed by shared code - * polarity - output parameter : 0 - Polarity is not reversed +/** + * e1000_check_polarity - Check the cable polarity + * @hw: Struct containing variables accessed by shared code + * @polarity: output parameter : 0 - Polarity is not reversed * 1 - Polarity is reversed. * * returns: - E1000_ERR_XXX @@ -6717,73 +4961,65 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will * return 0. If the link speed is 1000 Mbps the polarity status is in the * IGP01E1000_PHY_PCS_INIT_REG. - *****************************************************************************/ + */ static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_check_polarity"); - - if ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563)) { - /* return the Polarity bit in the Status register. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if (ret_val) - return ret_val; - *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> - M88E1000_PSSR_REV_POLARITY_SHIFT) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - - } else if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) { - /* Read the Status register to check the speed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to - * find the polarity status */ - if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) { - - /* Read the GIG initialization PCS register (0x00B4) */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG, - &phy_data); - if (ret_val) - return ret_val; - - /* Check the polarity bits */ - *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } else { - /* For 10 Mbps, read the polarity bit in the status register. (for - * 100 Mbps this bit is always 0) */ - *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } - } else if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL, - &phy_data); - if (ret_val) - return ret_val; - *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >> - IFE_PESC_POLARITY_REVERSED_SHIFT) ? - e1000_rev_polarity_reversed : e1000_rev_polarity_normal; - } - return E1000_SUCCESS; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_check_polarity"); + + if (hw->phy_type == e1000_phy_m88) { + /* return the Polarity bit in the Status register. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; + *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> + M88E1000_PSSR_REV_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; + + } else if (hw->phy_type == e1000_phy_igp) { + /* Read the Status register to check the speed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to + * find the polarity status */ + if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + + /* Read the GIG initialization PCS register (0x00B4) */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG, + &phy_data); + if (ret_val) + return ret_val; + + /* Check the polarity bits */ + *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? + e1000_rev_polarity_reversed : + e1000_rev_polarity_normal; + } else { + /* For 10 Mbps, read the polarity bit in the status register. (for + * 100 Mbps this bit is always 0) */ + *polarity = + (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? + e1000_rev_polarity_reversed : + e1000_rev_polarity_normal; + } + } + return E1000_SUCCESS; } -/****************************************************************************** - * Check if Downshift occured - * - * hw - Struct containing variables accessed by shared code - * downshift - output parameter : 0 - No Downshift ocured. - * 1 - Downshift ocured. +/** + * e1000_check_downshift - Check if Downshift occurred + * @hw: Struct containing variables accessed by shared code + * @downshift: output parameter : 0 - No Downshift occurred. + * 1 - Downshift occurred. * * returns: - E1000_ERR_XXX * E1000_SUCCESS @@ -6792,2041 +5028,607 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, * Specific Status register. For IGP phy's, it reads the Downgrade bit in the * Link Health register. In IGP this bit is latched high, so the driver must * read it immediately after link is established. - *****************************************************************************/ + */ static s32 e1000_check_downshift(struct e1000_hw *hw) { - s32 ret_val; - u16 phy_data; - - DEBUGFUNC("e1000_check_downshift"); - - if (hw->phy_type == e1000_phy_igp || - hw->phy_type == e1000_phy_igp_3 || - hw->phy_type == e1000_phy_igp_2) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, - &phy_data); - if (ret_val) - return ret_val; - - hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0; - } else if ((hw->phy_type == e1000_phy_m88) || - (hw->phy_type == e1000_phy_gg82563)) { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> - M88E1000_PSSR_DOWNSHIFT_SHIFT; - } else if (hw->phy_type == e1000_phy_ife) { - /* e1000_phy_ife supports 10/100 speed only */ - hw->speed_downgraded = false; - } - - return E1000_SUCCESS; -} + s32 ret_val; + u16 phy_data; -/***************************************************************************** - * - * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a - * gigabit link is achieved to improve link quality. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_PHY if fail to read/write the PHY - * E1000_SUCCESS at any other case. - * - ****************************************************************************/ + DEBUGFUNC("e1000_check_downshift"); -static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) -{ - s32 ret_val; - u16 phy_data, phy_saved_data, speed, duplex, i; - u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - {IGP01E1000_PHY_AGC_PARAM_A, - IGP01E1000_PHY_AGC_PARAM_B, - IGP01E1000_PHY_AGC_PARAM_C, - IGP01E1000_PHY_AGC_PARAM_D}; - u16 min_length, max_length; - - DEBUGFUNC("e1000_config_dsp_after_link_change"); - - if (hw->phy_type != e1000_phy_igp) - return E1000_SUCCESS; - - if (link_up) { - ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) { - DEBUGOUT("Error getting link speed and duplex\n"); - return ret_val; - } - - if (speed == SPEED_1000) { - - ret_val = e1000_get_cable_length(hw, &min_length, &max_length); - if (ret_val) - return ret_val; - - if ((hw->dsp_config_state == e1000_dsp_config_enabled) && - min_length >= e1000_igp_cable_length_50) { - - for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; - - ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i], - phy_data); - if (ret_val) - return ret_val; - } - hw->dsp_config_state = e1000_dsp_config_activated; - } - - if ((hw->ffe_config_state == e1000_ffe_config_enabled) && - (min_length < e1000_igp_cable_length_50)) { - - u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20; - u32 idle_errs = 0; - - /* clear previous idle error counts */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - for (i = 0; i < ffe_idle_err_timeout; i++) { - udelay(1000); - ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, - &phy_data); - if (ret_val) - return ret_val; - - idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT); - if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) { - hw->ffe_config_state = e1000_ffe_config_active; - - ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_CM_CP); - if (ret_val) - return ret_val; - break; - } - - if (idle_errs) - ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100; - } - } - } - } else { - if (hw->dsp_config_state == e1000_dsp_config_activated) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ - ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - - if (ret_val) - return ret_val; - - /* Disable the PHY transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - - if (ret_val) - return ret_val; - - mdelay(20); - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); - if (ret_val) - return ret_val; - for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { - ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; - phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS; - - ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data); - if (ret_val) - return ret_val; - } - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); - if (ret_val) - return ret_val; - - mdelay(20); - - /* Now enable the transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - - if (ret_val) - return ret_val; - - hw->dsp_config_state = e1000_dsp_config_enabled; - } - - if (hw->ffe_config_state == e1000_ffe_config_active) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ - ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - - if (ret_val) - return ret_val; - - /* Disable the PHY transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - - if (ret_val) - return ret_val; - - mdelay(20); - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_DEFAULT); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); - if (ret_val) - return ret_val; - - mdelay(20); - - /* Now enable the transmitter */ - ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - - if (ret_val) - return ret_val; - - hw->ffe_config_state = e1000_ffe_config_enabled; - } - } - return E1000_SUCCESS; -} + if (hw->phy_type == e1000_phy_igp) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, + &phy_data); + if (ret_val) + return ret_val; -/***************************************************************************** - * Set PHY to class A mode - * Assumes the following operations will follow to enable the new class mode. - * 1. Do a PHY soft reset - * 2. Restart auto-negotiation or force link. - * - * hw - Struct containing variables accessed by shared code - ****************************************************************************/ -static s32 e1000_set_phy_mode(struct e1000_hw *hw) -{ - s32 ret_val; - u16 eeprom_data; - - DEBUGFUNC("e1000_set_phy_mode"); - - if ((hw->mac_type == e1000_82545_rev_3) && - (hw->media_type == e1000_media_type_copper)) { - ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data); - if (ret_val) { - return ret_val; - } - - if ((eeprom_data != EEPROM_RESERVED_WORD) && - (eeprom_data & EEPROM_PHY_CLASS_A)) { - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104); - if (ret_val) - return ret_val; - - hw->phy_reset_disable = false; - } - } - - return E1000_SUCCESS; -} + hw->speed_downgraded = + (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; -/***************************************************************************** - * - * This function sets the lplu state according to the active flag. When - * activating lplu this function also disables smart speed and vise versa. - * lplu will not be activated unless the device autonegotiation advertisment - * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. - * hw: Struct containing variables accessed by shared code - * active - true to enable lplu false to disable lplu. - * - * returns: - E1000_ERR_PHY if fail to read/write the PHY - * E1000_SUCCESS at any other case. - * - ****************************************************************************/ + hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> + M88E1000_PSSR_DOWNSHIFT_SHIFT; + } -static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) -{ - u32 phy_ctrl = 0; - s32 ret_val; - u16 phy_data; - DEBUGFUNC("e1000_set_d3_lplu_state"); - - if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2 - && hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - /* During driver activity LPLU should not be used or it will attain link - * from the lowest speeds starting from 10Mbps. The capability is used for - * Dx transitions and states */ - if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); - if (ret_val) - return ret_val; - } else if (hw->mac_type == e1000_ich8lan) { - /* MAC writes into PHY register based on the state transition - * and start auto-negotiation. SW driver can overwrite the settings - * in CSR PHY power control E1000_PHY_CTRL register. */ - phy_ctrl = er32(PHY_CTRL); - } else { - ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - if (ret_val) - return ret_val; - } - - if (!active) { - if (hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547_rev_2) { - phy_data &= ~IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); - if (ret_val) - return ret_val; - } else { - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data &= ~IGP02E1000_PM_D3_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - phy_data); - if (ret_val) - return ret_val; - } - } - - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during - * Dx states where the power conservation is most important. During - * driver activity we should enable SmartSpeed, so performance is - * maintained. */ - if (hw->smart_speed == e1000_smart_speed_on) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } else if (hw->smart_speed == e1000_smart_speed_off) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } - - } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) || - (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || - (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { - - if (hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547_rev_2) { - phy_data |= IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); - if (ret_val) - return ret_val; - } else { - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data |= IGP02E1000_PM_D3_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - phy_data); - if (ret_val) - return ret_val; - } - } - - /* When LPLU is enabled we should disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if (ret_val) - return ret_val; - - } - return E1000_SUCCESS; + return E1000_SUCCESS; } -/***************************************************************************** - * - * This function sets the lplu d0 state according to the active flag. When - * activating lplu this function also disables smart speed and vise versa. - * lplu will not be activated unless the device autonegotiation advertisment - * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. - * hw: Struct containing variables accessed by shared code - * active - true to enable lplu false to disable lplu. +/** + * e1000_config_dsp_after_link_change + * @hw: Struct containing variables accessed by shared code + * @link_up: was link up at the time this was called * * returns: - E1000_ERR_PHY if fail to read/write the PHY * E1000_SUCCESS at any other case. * - ****************************************************************************/ - -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) -{ - u32 phy_ctrl = 0; - s32 ret_val; - u16 phy_data; - DEBUGFUNC("e1000_set_d0_lplu_state"); - - if (hw->mac_type <= e1000_82547_rev_2) - return E1000_SUCCESS; - - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl = er32(PHY_CTRL); - } else { - ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - if (ret_val) - return ret_val; - } - - if (!active) { - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); - if (ret_val) - return ret_val; - } - - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during - * Dx states where the power conservation is most important. During - * driver activity we should enable SmartSpeed, so performance is - * maintained. */ - if (hw->smart_speed == e1000_smart_speed_on) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } else if (hw->smart_speed == e1000_smart_speed_off) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if (ret_val) - return ret_val; - } - - - } else { - - if (hw->mac_type == e1000_ich8lan) { - phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - } else { - phy_data |= IGP02E1000_PM_D0_LPLU; - ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); - if (ret_val) - return ret_val; - } - - /* When LPLU is enabled we should disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if (ret_val) - return ret_val; - - } - return E1000_SUCCESS; -} + * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a + * gigabit link is achieved to improve link quality. + */ -/****************************************************************************** - * Change VCO speed register to improve Bit Error Rate performance of SERDES. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static s32 e1000_set_vco_speed(struct e1000_hw *hw) +static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) { - s32 ret_val; - u16 default_page = 0; - u16 phy_data; - - DEBUGFUNC("e1000_set_vco_speed"); + s32 ret_val; + u16 phy_data, phy_saved_data, speed, duplex, i; + u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = + { IGP01E1000_PHY_AGC_PARAM_A, + IGP01E1000_PHY_AGC_PARAM_B, + IGP01E1000_PHY_AGC_PARAM_C, + IGP01E1000_PHY_AGC_PARAM_D + }; + u16 min_length, max_length; + + DEBUGFUNC("e1000_config_dsp_after_link_change"); + + if (hw->phy_type != e1000_phy_igp) + return E1000_SUCCESS; + + if (link_up) { + ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT("Error getting link speed and duplex\n"); + return ret_val; + } - switch (hw->mac_type) { - case e1000_82545_rev_3: - case e1000_82546_rev_3: - break; - default: - return E1000_SUCCESS; - } + if (speed == SPEED_1000) { + + ret_val = + e1000_get_cable_length(hw, &min_length, + &max_length); + if (ret_val) + return ret_val; + + if ((hw->dsp_config_state == e1000_dsp_config_enabled) + && min_length >= e1000_igp_cable_length_50) { + + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + ret_val = + e1000_read_phy_reg(hw, + dsp_reg_array[i], + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= + ~IGP01E1000_PHY_EDAC_MU_INDEX; + + ret_val = + e1000_write_phy_reg(hw, + dsp_reg_array + [i], phy_data); + if (ret_val) + return ret_val; + } + hw->dsp_config_state = + e1000_dsp_config_activated; + } + + if ((hw->ffe_config_state == e1000_ffe_config_enabled) + && (min_length < e1000_igp_cable_length_50)) { + + u16 ffe_idle_err_timeout = + FFE_IDLE_ERR_COUNT_TIMEOUT_20; + u32 idle_errs = 0; + + /* clear previous idle error counts */ + ret_val = + e1000_read_phy_reg(hw, PHY_1000T_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + for (i = 0; i < ffe_idle_err_timeout; i++) { + udelay(1000); + ret_val = + e1000_read_phy_reg(hw, + PHY_1000T_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + idle_errs += + (phy_data & + SR_1000T_IDLE_ERROR_CNT); + if (idle_errs > + SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) + { + hw->ffe_config_state = + e1000_ffe_config_active; + + ret_val = + e1000_write_phy_reg(hw, + IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_CM_CP); + if (ret_val) + return ret_val; + break; + } + + if (idle_errs) + ffe_idle_err_timeout = + FFE_IDLE_ERR_COUNT_TIMEOUT_100; + } + } + } + } else { + if (hw->dsp_config_state == e1000_dsp_config_activated) { + /* Save off the current value of register 0x2F5B to be restored at + * the end of the routines. */ + ret_val = + e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); + + if (ret_val) + return ret_val; + + /* Disable the PHY transmitter */ + ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); + + if (ret_val) + return ret_val; + + mdelay(20); + + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_FORCE_GIGA); + if (ret_val) + return ret_val; + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + ret_val = + e1000_read_phy_reg(hw, dsp_reg_array[i], + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; + phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS; + + ret_val = + e1000_write_phy_reg(hw, dsp_reg_array[i], + phy_data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_RESTART_AUTONEG); + if (ret_val) + return ret_val; + + mdelay(20); + + /* Now enable the transmitter */ + ret_val = + e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); + + if (ret_val) + return ret_val; + + hw->dsp_config_state = e1000_dsp_config_enabled; + } - /* Set PHY register 30, page 5, bit 8 to 0 */ + if (hw->ffe_config_state == e1000_ffe_config_active) { + /* Save off the current value of register 0x2F5B to be restored at + * the end of the routines. */ + ret_val = + e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page); - if (ret_val) - return ret_val; + if (ret_val) + return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005); - if (ret_val) - return ret_val; + /* Disable the PHY transmitter */ + ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); - if (ret_val) - return ret_val; + if (ret_val) + return ret_val; - phy_data &= ~M88E1000_PHY_VCO_REG_BIT8; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); - if (ret_val) - return ret_val; + mdelay(20); - /* Set PHY register 30, page 4, bit 11 to 1 */ + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_FORCE_GIGA); + if (ret_val) + return ret_val; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_DEFAULT); + if (ret_val) + return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004); - if (ret_val) - return ret_val; + ret_val = e1000_write_phy_reg(hw, 0x0000, + IGP01E1000_IEEE_RESTART_AUTONEG); + if (ret_val) + return ret_val; - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); - if (ret_val) - return ret_val; + mdelay(20); - phy_data |= M88E1000_PHY_VCO_REG_BIT11; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); - if (ret_val) - return ret_val; + /* Now enable the transmitter */ + ret_val = + e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page); - if (ret_val) - return ret_val; + if (ret_val) + return ret_val; - return E1000_SUCCESS; + hw->ffe_config_state = e1000_ffe_config_enabled; + } + } + return E1000_SUCCESS; } - -/***************************************************************************** - * This function reads the cookie from ARC ram. +/** + * e1000_set_phy_mode - Set PHY to class A mode + * @hw: Struct containing variables accessed by shared code * - * returns: - E1000_SUCCESS . - ****************************************************************************/ -static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer) + * Assumes the following operations will follow to enable the new class mode. + * 1. Do a PHY soft reset + * 2. Restart auto-negotiation or force link. + */ +static s32 e1000_set_phy_mode(struct e1000_hw *hw) { - u8 i; - u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET; - u8 length = E1000_MNG_DHCP_COOKIE_LENGTH; - - length = (length >> 2); - offset = (offset >> 2); - - for (i = 0; i < length; i++) { - *((u32 *)buffer + i) = - E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i); - } - return E1000_SUCCESS; -} + s32 ret_val; + u16 eeprom_data; + DEBUGFUNC("e1000_set_phy_mode"); -/***************************************************************************** - * This function checks whether the HOST IF is enabled for command operaton - * and also checks whether the previous command is completed. - * It busy waits in case of previous command is not completed. - * - * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or - * timeout - * - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) -{ - u32 hicr; - u8 i; - - /* Check that the host interface is enabled. */ - hicr = er32(HICR); - if ((hicr & E1000_HICR_EN) == 0) { - DEBUGOUT("E1000_HOST_EN bit disabled.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - /* check the previous command is completed */ - for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { - hicr = er32(HICR); - if (!(hicr & E1000_HICR_C)) - break; - mdelay(1); - } - - if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - DEBUGOUT("Previous command timeout failed .\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - return E1000_SUCCESS; -} + if ((hw->mac_type == e1000_82545_rev_3) && + (hw->media_type == e1000_media_type_copper)) { + ret_val = + e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, + &eeprom_data); + if (ret_val) { + return ret_val; + } -/***************************************************************************** - * This function writes the buffer content at the offset given on the host if. - * It also does alignment considerations to do the writes in most efficient way. - * Also fills up the sum of the buffer in *buffer parameter. - * - * returns - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum) -{ - u8 *tmp; - u8 *bufptr = buffer; - u32 data = 0; - u16 remaining, i, j, prev_bytes; - - /* sum = only sum of the data and it is not checksum */ - - if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) { - return -E1000_ERR_PARAM; - } - - tmp = (u8 *)&data; - prev_bytes = offset & 0x3; - offset &= 0xFFFC; - offset >>= 2; - - if (prev_bytes) { - data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset); - for (j = prev_bytes; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data); - length -= j - prev_bytes; - offset++; - } - - remaining = length & 0x3; - length -= remaining; - - /* Calculate length in DWORDs */ - length >>= 2; - - /* The device driver writes the relevant command block into the - * ram area. */ - for (i = 0; i < length; i++) { - for (j = 0; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); - } - if (remaining) { - for (j = 0; j < sizeof(u32); j++) { - if (j < remaining) - *(tmp + j) = *bufptr++; - else - *(tmp + j) = 0; - - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); - } - - return E1000_SUCCESS; -} + if ((eeprom_data != EEPROM_RESERVED_WORD) && + (eeprom_data & EEPROM_PHY_CLASS_A)) { + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, + 0x000B); + if (ret_val) + return ret_val; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, + 0x8104); + if (ret_val) + return ret_val; + + hw->phy_reset_disable = false; + } + } + return E1000_SUCCESS; +} -/***************************************************************************** - * This function writes the command header after does the checksum calculation. +/** + * e1000_set_d3_lplu_state - set d3 link power state + * @hw: Struct containing variables accessed by shared code + * @active: true to enable lplu false to disable lplu. + * + * This function sets the lplu state according to the active flag. When + * activating lplu this function also disables smart speed and vise versa. + * lplu will not be activated unless the device autonegotiation advertisement + * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. * - * returns - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) + * returns: - E1000_ERR_PHY if fail to read/write the PHY + * E1000_SUCCESS at any other case. + */ +static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) { - u16 i; - u8 sum; - u8 *buffer; - - /* Write the whole command header structure which includes sum of - * the buffer */ - - u16 length = sizeof(struct e1000_host_mng_command_header); + s32 ret_val; + u16 phy_data; + DEBUGFUNC("e1000_set_d3_lplu_state"); + + if (hw->phy_type != e1000_phy_igp) + return E1000_SUCCESS; + + /* During driver activity LPLU should not be used or it will attain link + * from the lowest speeds starting from 10Mbps. The capability is used for + * Dx transitions and states */ + if (hw->mac_type == e1000_82541_rev_2 + || hw->mac_type == e1000_82547_rev_2) { + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); + if (ret_val) + return ret_val; + } - sum = hdr->checksum; - hdr->checksum = 0; + if (!active) { + if (hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data &= ~IGP01E1000_GMII_FLEX_SPD; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + phy_data); + if (ret_val) + return ret_val; + } - buffer = (u8 *)hdr; - i = length; - while (i--) - sum += buffer[i]; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during + * Dx states where the power conservation is most important. During + * driver activity we should enable SmartSpeed, so performance is + * maintained. */ + if (hw->smart_speed == e1000_smart_speed_on) { + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; + } else if (hw->smart_speed == e1000_smart_speed_off) { + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; + } + } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) + || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL) + || (hw->autoneg_advertised == + AUTONEG_ADVERTISE_10_100_ALL)) { + + if (hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data |= IGP01E1000_GMII_FLEX_SPD; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, + phy_data); + if (ret_val) + return ret_val; + } - hdr->checksum = 0 - sum; + /* When LPLU is enabled we should disable SmartSpeed */ + ret_val = + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; - length >>= 2; - /* The device driver writes the relevant command block into the ram area. */ - for (i = 0; i < length; i++) { - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i)); - E1000_WRITE_FLUSH(); - } + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = + e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) + return ret_val; - return E1000_SUCCESS; + } + return E1000_SUCCESS; } - -/***************************************************************************** - * This function indicates to ARC that a new command is pending which completes - * one write operation by the driver. +/** + * e1000_set_vco_speed + * @hw: Struct containing variables accessed by shared code * - * returns - E1000_SUCCESS for success. - ****************************************************************************/ -static s32 e1000_mng_write_commit(struct e1000_hw *hw) + * Change VCO speed register to improve Bit Error Rate performance of SERDES. + */ +static s32 e1000_set_vco_speed(struct e1000_hw *hw) { - u32 hicr; + s32 ret_val; + u16 default_page = 0; + u16 phy_data; - hicr = er32(HICR); - /* Setting this bit tells the ARC that a new command is pending. */ - ew32(HICR, hicr | E1000_HICR_C); + DEBUGFUNC("e1000_set_vco_speed"); - return E1000_SUCCESS; -} + switch (hw->mac_type) { + case e1000_82545_rev_3: + case e1000_82546_rev_3: + break; + default: + return E1000_SUCCESS; + } + /* Set PHY register 30, page 5, bit 8 to 0 */ -/***************************************************************************** - * This function checks the mode of the firmware. - * - * returns - true when the mode is IAMT or false. - ****************************************************************************/ -bool e1000_check_mng_mode(struct e1000_hw *hw) -{ - u32 fwsm; - - fwsm = er32(FWSM); + ret_val = + e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page); + if (ret_val) + return ret_val; - if (hw->mac_type == e1000_ich8lan) { - if ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return true; - } else if ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return true; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005); + if (ret_val) + return ret_val; - return false; -} + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~M88E1000_PHY_VCO_REG_BIT8; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); + if (ret_val) + return ret_val; -/***************************************************************************** - * This function writes the dhcp info . - ****************************************************************************/ -s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) -{ - s32 ret_val; - struct e1000_host_mng_command_header hdr; - - hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; - hdr.command_length = length; - hdr.reserved1 = 0; - hdr.reserved2 = 0; - hdr.checksum = 0; - - ret_val = e1000_mng_enable_host_if(hw); - if (ret_val == E1000_SUCCESS) { - ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr), - &(hdr.checksum)); - if (ret_val == E1000_SUCCESS) { - ret_val = e1000_mng_write_cmd_header(hw, &hdr); - if (ret_val == E1000_SUCCESS) - ret_val = e1000_mng_write_commit(hw); - } - } - return ret_val; -} + /* Set PHY register 30, page 4, bit 11 to 1 */ + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004); + if (ret_val) + return ret_val; -/***************************************************************************** - * This function calculates the checksum. - * - * returns - checksum of buffer contents. - ****************************************************************************/ -static u8 e1000_calculate_mng_checksum(char *buffer, u32 length) -{ - u8 sum = 0; - u32 i; + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); + if (ret_val) + return ret_val; - if (!buffer) - return 0; + phy_data |= M88E1000_PHY_VCO_REG_BIT11; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); + if (ret_val) + return ret_val; - for (i=0; i < length; i++) - sum += buffer[i]; + ret_val = + e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page); + if (ret_val) + return ret_val; - return (u8)(0 - sum); + return E1000_SUCCESS; } -/***************************************************************************** - * This function checks whether tx pkt filtering needs to be enabled or not. - * - * returns - true for packet filtering or false. - ****************************************************************************/ -bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) -{ - /* called in init as well as watchdog timer functions */ - - s32 ret_val, checksum; - bool tx_filter = false; - struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie); - u8 *buffer = (u8 *) &(hw->mng_cookie); - - if (e1000_check_mng_mode(hw)) { - ret_val = e1000_mng_enable_host_if(hw); - if (ret_val == E1000_SUCCESS) { - ret_val = e1000_host_if_read_cookie(hw, buffer); - if (ret_val == E1000_SUCCESS) { - checksum = hdr->checksum; - hdr->checksum = 0; - if ((hdr->signature == E1000_IAMT_SIGNATURE) && - checksum == e1000_calculate_mng_checksum((char *)buffer, - E1000_MNG_DHCP_COOKIE_LENGTH)) { - if (hdr->status & - E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT) - tx_filter = true; - } else - tx_filter = true; - } else - tx_filter = true; - } - } - - hw->tx_pkt_filtering = tx_filter; - return tx_filter; -} -/****************************************************************************** - * Verifies the hardware needs to allow ARPs to be processed by the host - * - * hw - Struct containing variables accessed by shared code +/** + * e1000_enable_mng_pass_thru - check for bmc pass through + * @hw: Struct containing variables accessed by shared code * + * Verifies the hardware needs to allow ARPs to be processed by the host * returns: - true/false - * - *****************************************************************************/ + */ u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw) { - u32 manc; - u32 fwsm, factps; - - if (hw->asf_firmware_present) { - manc = er32(MANC); - - if (!(manc & E1000_MANC_RCV_TCO_EN) || - !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) - return false; - if (e1000_arc_subsystem_valid(hw)) { - fwsm = er32(FWSM); - factps = er32(FACTPS); - - if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) == - e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG)) - return true; - } else - if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) - return true; - } - return false; -} + u32 manc; -static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) -{ - s32 ret_val; - u16 mii_status_reg; - u16 i; - - /* Polarity reversal workaround for forced 10F/10H links. */ - - /* Disable the transmitter on the PHY */ - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); - if (ret_val) - return ret_val; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); - if (ret_val) - return ret_val; - - /* This loop will early-out if the NO link condition has been met. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Link Status bit - * to be clear. - */ - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break; - mdelay(100); - } - - /* Recommended delay time after link has been lost */ - mdelay(1000); - - /* Now we will re-enable th transmitter on the PHY */ - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); - if (ret_val) - return ret_val; - mdelay(50); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0); - if (ret_val) - return ret_val; - mdelay(50); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00); - if (ret_val) - return ret_val; - mdelay(50); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000); - if (ret_val) - return ret_val; - - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); - if (ret_val) - return ret_val; - - /* This loop will early-out if the link condition has been met. */ - for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Link Status bit - * to be set. - */ - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (mii_status_reg & MII_SR_LINK_STATUS) break; - mdelay(100); - } - return E1000_SUCCESS; + if (hw->asf_firmware_present) { + manc = er32(MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN) || + !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) + return false; + if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) + return true; + } + return false; } -/*************************************************************************** - * - * Disables PCI-Express master access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - none. - * - ***************************************************************************/ -static void e1000_set_pci_express_master_disable(struct e1000_hw *hw) +static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) { - u32 ctrl; + s32 ret_val; + u16 mii_status_reg; + u16 i; - DEBUGFUNC("e1000_set_pci_express_master_disable"); + /* Polarity reversal workaround for forced 10F/10H links. */ - if (hw->bus_type != e1000_bus_type_pci_express) - return; + /* Disable the transmitter on the PHY */ - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; - ew32(CTRL, ctrl); -} + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); + if (ret_val) + return ret_val; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF); + if (ret_val) + return ret_val; -/******************************************************************************* - * - * Disables PCI-Express master access and verifies there are no pending requests - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't - * caused the master requests to be disabled. - * E1000_SUCCESS master requests disabled. - * - ******************************************************************************/ -s32 e1000_disable_pciex_master(struct e1000_hw *hw) -{ - s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */ + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); + if (ret_val) + return ret_val; - DEBUGFUNC("e1000_disable_pciex_master"); + /* This loop will early-out if the NO link condition has been met. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Link Status bit + * to be clear. + */ - if (hw->bus_type != e1000_bus_type_pci_express) - return E1000_SUCCESS; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; - e1000_set_pci_express_master_disable(hw); + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; - while (timeout) { - if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) - break; - else - udelay(100); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Master requests are pending.\n"); - return -E1000_ERR_MASTER_REQUESTS_PENDING; - } + if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) + break; + mdelay(100); + } - return E1000_SUCCESS; + /* Recommended delay time after link has been lost */ + mdelay(1000); + + /* Now we will re-enable th transmitter on the PHY */ + + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); + if (ret_val) + return ret_val; + mdelay(50); + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0); + if (ret_val) + return ret_val; + mdelay(50); + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00); + if (ret_val) + return ret_val; + mdelay(50); + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); + if (ret_val) + return ret_val; + + /* This loop will early-out if the link condition has been met. */ + for (i = PHY_FORCE_TIME; i > 0; i--) { + /* Read the MII Status Register and wait for Link Status bit + * to be set. + */ + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (mii_status_reg & MII_SR_LINK_STATUS) + break; + mdelay(100); + } + return E1000_SUCCESS; } -/******************************************************************************* +/** + * e1000_get_auto_rd_done + * @hw: Struct containing variables accessed by shared code * * Check for EEPROM Auto Read bit done. - * - * hw: Struct containing variables accessed by shared code - * * returns: - E1000_ERR_RESET if fail to reset MAC * E1000_SUCCESS at any other case. - * - ******************************************************************************/ + */ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) { - s32 timeout = AUTO_READ_DONE_TIMEOUT; - - DEBUGFUNC("e1000_get_auto_rd_done"); - - switch (hw->mac_type) { - default: - msleep(5); - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: - while (timeout) { - if (er32(EECD) & E1000_EECD_AUTO_RD) - break; - else msleep(1); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Auto read by HW from EEPROM has not completed.\n"); - return -E1000_ERR_RESET; - } - break; - } - - /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high. - * Need to wait for PHY configuration completion before accessing NVM - * and PHY. */ - if (hw->mac_type == e1000_82573) - msleep(25); - - return E1000_SUCCESS; + DEBUGFUNC("e1000_get_auto_rd_done"); + msleep(5); + return E1000_SUCCESS; } -/*************************************************************************** - * Checks if the PHY configuration is done - * - * hw: Struct containing variables accessed by shared code +/** + * e1000_get_phy_cfg_done + * @hw: Struct containing variables accessed by shared code * + * Checks if the PHY configuration is done * returns: - E1000_ERR_RESET if fail to reset MAC * E1000_SUCCESS at any other case. - * - ***************************************************************************/ + */ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) { - s32 timeout = PHY_CFG_TIMEOUT; - u32 cfg_mask = E1000_EEPROM_CFG_DONE; - - DEBUGFUNC("e1000_get_phy_cfg_done"); - - switch (hw->mac_type) { - default: - mdelay(10); - break; - case e1000_80003es2lan: - /* Separate *_CFG_DONE_* bit for each port */ - if (er32(STATUS) & E1000_STATUS_FUNC_1) - cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1; - /* Fall Through */ - case e1000_82571: - case e1000_82572: - while (timeout) { - if (er32(EEMNGCTL) & cfg_mask) - break; - else - msleep(1); - timeout--; - } - if (!timeout) { - DEBUGOUT("MNG configuration cycle has not completed.\n"); - return -E1000_ERR_RESET; - } - break; - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Using the combination of SMBI and SWESMBI semaphore bits when resetting - * adapter or Eeprom access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_EEPROM if fail to access EEPROM. - * E1000_SUCCESS at any other case. - * - ***************************************************************************/ -static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) -{ - s32 timeout; - u32 swsm; - - DEBUGFUNC("e1000_get_hw_eeprom_semaphore"); - - if (!hw->eeprom_semaphore_present) - return E1000_SUCCESS; - - if (hw->mac_type == e1000_80003es2lan) { - /* Get the SW semaphore. */ - if (e1000_get_software_semaphore(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - } - - /* Get the FW semaphore. */ - timeout = hw->eeprom.word_size + 1; - while (timeout) { - swsm = er32(SWSM); - swsm |= E1000_SWSM_SWESMBI; - ew32(SWSM, swsm); - /* if we managed to set the bit we got the semaphore. */ - swsm = er32(SWSM); - if (swsm & E1000_SWSM_SWESMBI) - break; - - udelay(50); - timeout--; - } - - if (!timeout) { - /* Release semaphores */ - e1000_put_hw_eeprom_semaphore(hw); - DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n"); - return -E1000_ERR_EEPROM; - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * This function clears HW semaphore bits. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - None. - * - ***************************************************************************/ -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) -{ - u32 swsm; - - DEBUGFUNC("e1000_put_hw_eeprom_semaphore"); - - if (!hw->eeprom_semaphore_present) - return; - - swsm = er32(SWSM); - if (hw->mac_type == e1000_80003es2lan) { - /* Release both semaphores. */ - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); - } else - swsm &= ~(E1000_SWSM_SWESMBI); - ew32(SWSM, swsm); -} - -/*************************************************************************** - * - * Obtaining software semaphore bit (SMBI) before resetting PHY. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - E1000_ERR_RESET if fail to obtain semaphore. - * E1000_SUCCESS at any other case. - * - ***************************************************************************/ -static s32 e1000_get_software_semaphore(struct e1000_hw *hw) -{ - s32 timeout = hw->eeprom.word_size + 1; - u32 swsm; - - DEBUGFUNC("e1000_get_software_semaphore"); - - if (hw->mac_type != e1000_80003es2lan) { - return E1000_SUCCESS; - } - - while (timeout) { - swsm = er32(SWSM); - /* If SMBI bit cleared, it is now set and we hold the semaphore */ - if (!(swsm & E1000_SWSM_SMBI)) - break; - mdelay(1); - timeout--; - } - - if (!timeout) { - DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); - return -E1000_ERR_RESET; - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Release semaphore bit (SMBI). - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -static void e1000_release_software_semaphore(struct e1000_hw *hw) -{ - u32 swsm; - - DEBUGFUNC("e1000_release_software_semaphore"); - - if (hw->mac_type != e1000_80003es2lan) { - return; - } - - swsm = er32(SWSM); - /* Release the SW semaphores.*/ - swsm &= ~E1000_SWSM_SMBI; - ew32(SWSM, swsm); -} - -/****************************************************************************** - * Checks if PHY reset is blocked due to SOL/IDER session, for example. - * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to - * the caller to figure out how to deal with it. - * - * hw - Struct containing variables accessed by shared code - * - * returns: - E1000_BLK_PHY_RESET - * E1000_SUCCESS - * - *****************************************************************************/ -s32 e1000_check_phy_reset_block(struct e1000_hw *hw) -{ - u32 manc = 0; - u32 fwsm = 0; - - if (hw->mac_type == e1000_ich8lan) { - fwsm = er32(FWSM); - return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS - : E1000_BLK_PHY_RESET; - } - - if (hw->mac_type > e1000_82547_rev_2) - manc = er32(MANC); - return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : E1000_SUCCESS; -} - -static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw) -{ - u32 fwsm; - - /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC - * may not be provided a DMA clock when no manageability features are - * enabled. We do not want to perform any reads/writes to these registers - * if this is the case. We read FWSM to determine the manageability mode. - */ - switch (hw->mac_type) { - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - fwsm = er32(FWSM); - if ((fwsm & E1000_FWSM_MODE_MASK) != 0) - return true; - break; - case e1000_ich8lan: - return true; - default: - break; - } - return false; -} - - -/****************************************************************************** - * Configure PCI-Ex no-snoop - * - * hw - Struct containing variables accessed by shared code. - * no_snoop - Bitmap of no-snoop events. - * - * returns: E1000_SUCCESS - * - *****************************************************************************/ -static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop) -{ - u32 gcr_reg = 0; - - DEBUGFUNC("e1000_set_pci_ex_no_snoop"); - - if (hw->bus_type == e1000_bus_type_unknown) - e1000_get_bus_info(hw); - - if (hw->bus_type != e1000_bus_type_pci_express) - return E1000_SUCCESS; - - if (no_snoop) { - gcr_reg = er32(GCR); - gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL); - gcr_reg |= no_snoop; - ew32(GCR, gcr_reg); - } - if (hw->mac_type == e1000_ich8lan) { - u32 ctrl_ext; - - ew32(GCR, PCI_EX_82566_SNOOP_ALL); - - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - ew32(CTRL_EXT, ctrl_ext); - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Get software semaphore FLAG bit (SWFLAG). - * SWFLAG is used to synchronize the access to all shared resource between - * SW, FW and HW. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -static s32 e1000_get_software_flag(struct e1000_hw *hw) -{ - s32 timeout = PHY_CFG_TIMEOUT; - u32 extcnf_ctrl; - - DEBUGFUNC("e1000_get_software_flag"); - - if (hw->mac_type == e1000_ich8lan) { - while (timeout) { - extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - - extcnf_ctrl = er32(EXTCNF_CTRL); - if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) - break; - mdelay(1); - timeout--; - } - - if (!timeout) { - DEBUGOUT("FW or HW locks the resource too long.\n"); - return -E1000_ERR_CONFIG; - } - } - - return E1000_SUCCESS; -} - -/*************************************************************************** - * - * Release software semaphore FLAG bit (SWFLAG). - * SWFLAG is used to synchronize the access to all shared resource between - * SW, FW and HW. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -static void e1000_release_software_flag(struct e1000_hw *hw) -{ - u32 extcnf_ctrl; - - DEBUGFUNC("e1000_release_software_flag"); - - if (hw->mac_type == e1000_ich8lan) { - extcnf_ctrl= er32(EXTCNF_CTRL); - extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - } - - return; -} - -/****************************************************************************** - * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access - * register. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to read - * data - word read from the EEPROM - * words - number of words to read - *****************************************************************************/ -static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - s32 error = E1000_SUCCESS; - u32 flash_bank = 0; - u32 act_offset = 0; - u32 bank_offset = 0; - u16 word = 0; - u16 i = 0; - - /* We need to know which is the valid flash bank. In the event - * that we didn't allocate eeprom_shadow_ram, we may not be - * managing flash_bank. So it cannot be trusted and needs - * to be updated with each read. - */ - /* Value of bit 22 corresponds to the flash bank we're on. */ - flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0; - - /* Adjust offset appropriately if we're on bank 1 - adjust for word size */ - bank_offset = flash_bank * (hw->flash_bank_size * 2); - - error = e1000_get_software_flag(hw); - if (error != E1000_SUCCESS) - return error; - - for (i = 0; i < words; i++) { - if (hw->eeprom_shadow_ram != NULL && - hw->eeprom_shadow_ram[offset+i].modified) { - data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word; - } else { - /* The NVM part needs a byte offset, hence * 2 */ - act_offset = bank_offset + ((offset + i) * 2); - error = e1000_read_ich8_word(hw, act_offset, &word); - if (error != E1000_SUCCESS) - break; - data[i] = word; - } - } - - e1000_release_software_flag(hw); - - return error; -} - -/****************************************************************************** - * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access - * register. Actually, writes are written to the shadow ram cache in the hw - * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to - * the NVM, which occurs when the NVM checksum is updated. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of word in the EEPROM to write - * words - number of words to write - * data - words to write to the EEPROM - *****************************************************************************/ -static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - u32 i = 0; - s32 error = E1000_SUCCESS; - - error = e1000_get_software_flag(hw); - if (error != E1000_SUCCESS) - return error; - - /* A driver can write to the NVM only if it has eeprom_shadow_ram - * allocated. Subsequent reads to the modified words are read from - * this cached structure as well. Writes will only go into this - * cached structure unless it's followed by a call to - * e1000_update_eeprom_checksum() where it will commit the changes - * and clear the "modified" field. - */ - if (hw->eeprom_shadow_ram != NULL) { - for (i = 0; i < words; i++) { - if ((offset + i) < E1000_SHADOW_RAM_WORDS) { - hw->eeprom_shadow_ram[offset+i].modified = true; - hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i]; - } else { - error = -E1000_ERR_EEPROM; - break; - } - } - } else { - /* Drivers have the option to not allocate eeprom_shadow_ram as long - * as they don't perform any NVM writes. An attempt in doing so - * will result in this error. - */ - error = -E1000_ERR_EEPROM; - } - - e1000_release_software_flag(hw); - - return error; -} - -/****************************************************************************** - * This function does initial flash setup so that a new read/write/erase cycle - * can be started. - * - * hw - The pointer to the hw structure - ****************************************************************************/ -static s32 e1000_ich8_cycle_init(struct e1000_hw *hw) -{ - union ich8_hws_flash_status hsfsts; - s32 error = E1000_ERR_EEPROM; - s32 i = 0; - - DEBUGFUNC("e1000_ich8_cycle_init"); - - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - - /* May be check the Flash Des Valid bit in Hw status */ - if (hsfsts.hsf_status.fldesvalid == 0) { - DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used."); - return error; - } - - /* Clear FCERR in Hw status by writing 1 */ - /* Clear DAEL in Hw status by writing a 1 */ - hsfsts.hsf_status.flcerr = 1; - hsfsts.hsf_status.dael = 1; - - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); - - /* Either we should have a hardware SPI cycle in progress bit to check - * against, in order to start a new cycle or FDONE bit should be changed - * in the hardware so that it is 1 after harware reset, which can then be - * used as an indication whether a cycle is in progress or has been - * completed .. we should also have some software semaphore mechanism to - * guard FDONE or the cycle in progress bit so that two threads access to - * those bits can be sequentiallized or a way so that 2 threads dont - * start the cycle at the same time */ - - if (hsfsts.hsf_status.flcinprog == 0) { - /* There is no cycle running at present, so we can start a cycle */ - /* Begin by setting Flash Cycle Done. */ - hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); - error = E1000_SUCCESS; - } else { - /* otherwise poll for sometime so the current cycle has a chance - * to end before giving up. */ - for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) { - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcinprog == 0) { - error = E1000_SUCCESS; - break; - } - udelay(1); - } - if (error == E1000_SUCCESS) { - /* Successful in waiting for previous cycle to timeout, - * now set the Flash Cycle Done. */ - hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); - } else { - DEBUGOUT("Flash controller busy, cannot get access"); - } - } - return error; -} - -/****************************************************************************** - * This function starts a flash cycle and waits for its completion - * - * hw - The pointer to the hw structure - ****************************************************************************/ -static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout) -{ - union ich8_hws_flash_ctrl hsflctl; - union ich8_hws_flash_status hsfsts; - s32 error = E1000_ERR_EEPROM; - u32 i = 0; - - /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* wait till FDONE bit is set to 1 */ - do { - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcdone == 1) - break; - udelay(1); - i++; - } while (i < timeout); - if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) { - error = E1000_SUCCESS; - } - return error; -} - -/****************************************************************************** - * Reads a byte or word from the NVM using the ICH8 flash access registers. - * - * hw - The pointer to the hw structure - * index - The index of the byte or word to read. - * size - Size of data to read, 1=byte 2=word - * data - Pointer to the word to store the value read. - *****************************************************************************/ -static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 *data) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_address; - u32 flash_data = 0; - s32 error = -E1000_ERR_EEPROM; - s32 count = 0; - - DEBUGFUNC("e1000_read_ich8_data"); - - if (size < 1 || size > 2 || data == NULL || - index > ICH_FLASH_LINEAR_ADDR_MASK) - return error; - - flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + - hw->flash_base_addr; - - do { - udelay(1); - /* Steps */ - error = e1000_ich8_cycle_init(hw); - if (error != E1000_SUCCESS) - break; - - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size - 1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* Write the last 24 bits of index into Flash Linear address field in - * Flash Address */ - /* TODO: TBD maybe check the index against the size of flash */ - - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - - error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); - - /* Check if FCERR is set to 1, if set to 1, clear it and try the whole - * sequence a few more times, else read in (shift in) the Flash Data0, - * the order is least significant byte first msb to lsb */ - if (error == E1000_SUCCESS) { - flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0); - if (size == 1) { - *data = (u8)(flash_data & 0x000000FF); - } else if (size == 2) { - *data = (u16)(flash_data & 0x0000FFFF); - } - break; - } else { - /* If we've gotten here, then things are probably completely hosed, - * but if the error condition is detected, it won't hurt to give - * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* Repeat for some time before giving up. */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - DEBUGOUT("Timeout error - flash cycle did not complete."); - break; - } - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); - - return error; -} - -/****************************************************************************** - * Writes One /two bytes to the NVM using the ICH8 flash access registers. - * - * hw - The pointer to the hw structure - * index - The index of the byte/word to read. - * size - Size of data to read, 1=byte 2=word - * data - The byte(s) to write to the NVM. - *****************************************************************************/ -static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 data) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_address; - u32 flash_data = 0; - s32 error = -E1000_ERR_EEPROM; - s32 count = 0; - - DEBUGFUNC("e1000_write_ich8_data"); - - if (size < 1 || size > 2 || data > size * 0xff || - index > ICH_FLASH_LINEAR_ADDR_MASK) - return error; - - flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + - hw->flash_base_addr; - - do { - udelay(1); - /* Steps */ - error = e1000_ich8_cycle_init(hw); - if (error != E1000_SUCCESS) - break; - - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size -1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* Write the last 24 bits of index into Flash Linear address field in - * Flash Address */ - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - - if (size == 1) - flash_data = (u32)data & 0x00FF; - else - flash_data = (u32)data; - - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data); - - /* check if FCERR is set to 1 , if set to 1, clear it and try the whole - * sequence a few more times else done */ - error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); - if (error == E1000_SUCCESS) { - break; - } else { - /* If we're here, then things are most likely completely hosed, - * but if the error condition is detected, it won't hurt to give - * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* Repeat for some time before giving up. */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - DEBUGOUT("Timeout error - flash cycle did not complete."); - break; - } - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); - - return error; -} - -/****************************************************************************** - * Reads a single byte from the NVM using the ICH8 flash access registers. - * - * hw - pointer to e1000_hw structure - * index - The index of the byte to read. - * data - Pointer to a byte to store the value read. - *****************************************************************************/ -static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data) -{ - s32 status = E1000_SUCCESS; - u16 word = 0; - - status = e1000_read_ich8_data(hw, index, 1, &word); - if (status == E1000_SUCCESS) { - *data = (u8)word; - } - - return status; -} - -/****************************************************************************** - * Writes a single byte to the NVM using the ICH8 flash access registers. - * Performs verification by reading back the value and then going through - * a retry algorithm before giving up. - * - * hw - pointer to e1000_hw structure - * index - The index of the byte to write. - * byte - The byte to write to the NVM. - *****************************************************************************/ -static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte) -{ - s32 error = E1000_SUCCESS; - s32 program_retries = 0; - - DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index); - - error = e1000_write_ich8_byte(hw, index, byte); - - if (error != E1000_SUCCESS) { - for (program_retries = 0; program_retries < 100; program_retries++) { - DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index); - error = e1000_write_ich8_byte(hw, index, byte); - udelay(100); - if (error == E1000_SUCCESS) - break; - } - } - - if (program_retries == 100) - error = E1000_ERR_EEPROM; - - return error; -} - -/****************************************************************************** - * Writes a single byte to the NVM using the ICH8 flash access registers. - * - * hw - pointer to e1000_hw structure - * index - The index of the byte to read. - * data - The byte to write to the NVM. - *****************************************************************************/ -static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data) -{ - s32 status = E1000_SUCCESS; - u16 word = (u16)data; - - status = e1000_write_ich8_data(hw, index, 1, word); - - return status; -} - -/****************************************************************************** - * Reads a word from the NVM using the ICH8 flash access registers. - * - * hw - pointer to e1000_hw structure - * index - The starting byte index of the word to read. - * data - Pointer to a word to store the value read. - *****************************************************************************/ -static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data) -{ - s32 status = E1000_SUCCESS; - status = e1000_read_ich8_data(hw, index, 2, data); - return status; -} - -/****************************************************************************** - * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0 - * based. - * - * hw - pointer to e1000_hw structure - * bank - 0 for first bank, 1 for second bank - * - * Note that this function may actually erase as much as 8 or 64 KBytes. The - * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the - * bank size may be 4, 8 or 64 KBytes - *****************************************************************************/ -static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_address; - s32 count = 0; - s32 error = E1000_ERR_EEPROM; - s32 iteration; - s32 sub_sector_size = 0; - s32 bank_size; - s32 j = 0; - s32 error_flag = 0; - - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - - /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ - /* 00: The Hw sector is 256 bytes, hence we need to erase 16 - * consecutive sectors. The start index for the nth Hw sector can be - * calculated as bank * 4096 + n * 256 - * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. - * The start index for the nth Hw sector can be calculated - * as bank * 4096 - * 10: The HW sector is 8K bytes - * 11: The Hw sector size is 64K bytes */ - if (hsfsts.hsf_status.berasesz == 0x0) { - /* Hw sector size 256 */ - sub_sector_size = ICH_FLASH_SEG_SIZE_256; - bank_size = ICH_FLASH_SECTOR_SIZE; - iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256; - } else if (hsfsts.hsf_status.berasesz == 0x1) { - bank_size = ICH_FLASH_SEG_SIZE_4K; - iteration = 1; - } else if (hsfsts.hsf_status.berasesz == 0x3) { - bank_size = ICH_FLASH_SEG_SIZE_64K; - iteration = 1; - } else { - return error; - } - - for (j = 0; j < iteration ; j++) { - do { - count++; - /* Steps */ - error = e1000_ich8_cycle_init(hw); - if (error != E1000_SUCCESS) { - error_flag = 1; - break; - } - - /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash - * Control */ - hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; - E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* Write the last 24 bits of an index within the block into Flash - * Linear address field in Flash Address. This probably needs to - * be calculated here based off the on-chip erase sector size and - * the software bank size (4, 8 or 64 KBytes) */ - flash_linear_address = bank * bank_size + j * sub_sector_size; - flash_linear_address += hw->flash_base_addr; - flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK; - - E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - - error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT); - /* Check if FCERR is set to 1. If 1, clear it and try the whole - * sequence a few more times else Done */ - if (error == E1000_SUCCESS) { - break; - } else { - hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* repeat for some time before giving up */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - error_flag = 1; - break; - } - } - } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); - if (error_flag == 1) - break; - } - if (error_flag != 1) - error = E1000_SUCCESS; - return error; -} - -static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, - u32 cnf_base_addr, - u32 cnf_size) -{ - u32 ret_val = E1000_SUCCESS; - u16 word_addr, reg_data, reg_addr; - u16 i; - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - /* cnf_size is returned in size of dwords */ - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr); - if (ret_val) - return ret_val; - - ret_val = e1000_get_software_flag(hw); - if (ret_val != E1000_SUCCESS) - return ret_val; - - ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data); - - e1000_release_software_flag(hw); - } - - return ret_val; -} - - -/****************************************************************************** - * This function initializes the PHY from the NVM on ICH8 platforms. This - * is needed due to an issue where the NVM configuration is not properly - * autoloaded after power transitions. Therefore, after each PHY reset, we - * will load the configuration data out of the NVM manually. - * - * hw: Struct containing variables accessed by shared code - *****************************************************************************/ -static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw) -{ - u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop; - - if (hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - /* Check if SW needs configure the PHY */ - reg_data = er32(FEXTNVM); - if (!(reg_data & FEXTNVM_SW_CONFIG)) - return E1000_SUCCESS; - - /* Wait for basic configuration completes before proceeding*/ - loop = 0; - do { - reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE; - udelay(100); - loop++; - } while ((!reg_data) && (loop < 50)); - - /* Clear the Init Done bit for the next init event */ - reg_data = er32(STATUS); - reg_data &= ~E1000_STATUS_LAN_INIT_DONE; - ew32(STATUS, reg_data); - - /* Make sure HW does not configure LCD from PHY extended configuration - before SW configuration */ - reg_data = er32(EXTCNF_CTRL); - if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) { - reg_data = er32(EXTCNF_SIZE); - cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH; - cnf_size >>= 16; - if (cnf_size) { - reg_data = er32(EXTCNF_CTRL); - cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER; - /* cnf_base_addr is in DWORD */ - cnf_base_addr >>= 16; - - /* Configure LCD from extended configuration region. */ - ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr, - cnf_size); - if (ret_val) - return ret_val; - } - } - - return E1000_SUCCESS; + DEBUGFUNC("e1000_get_phy_cfg_done"); + mdelay(10); + return E1000_SUCCESS; } - diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a8866bdbb67..9acfddb0daf 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -35,7 +35,6 @@ #include "e1000_osdep.h" - /* Forward declarations of structures used by the shared code */ struct e1000_hw; struct e1000_hw_stats; @@ -43,252 +42,231 @@ struct e1000_hw_stats; /* Enumerated types specific to the e1000 hardware */ /* Media Access Controlers */ typedef enum { - e1000_undefined = 0, - e1000_82542_rev2_0, - e1000_82542_rev2_1, - e1000_82543, - e1000_82544, - e1000_82540, - e1000_82545, - e1000_82545_rev_3, - e1000_82546, - e1000_82546_rev_3, - e1000_82541, - e1000_82541_rev_2, - e1000_82547, - e1000_82547_rev_2, - e1000_82571, - e1000_82572, - e1000_82573, - e1000_80003es2lan, - e1000_ich8lan, - e1000_num_macs + e1000_undefined = 0, + e1000_82542_rev2_0, + e1000_82542_rev2_1, + e1000_82543, + e1000_82544, + e1000_82540, + e1000_82545, + e1000_82545_rev_3, + e1000_82546, + e1000_82546_rev_3, + e1000_82541, + e1000_82541_rev_2, + e1000_82547, + e1000_82547_rev_2, + e1000_num_macs } e1000_mac_type; typedef enum { - e1000_eeprom_uninitialized = 0, - e1000_eeprom_spi, - e1000_eeprom_microwire, - e1000_eeprom_flash, - e1000_eeprom_ich8, - e1000_eeprom_none, /* No NVM support */ - e1000_num_eeprom_types + e1000_eeprom_uninitialized = 0, + e1000_eeprom_spi, + e1000_eeprom_microwire, + e1000_eeprom_flash, + e1000_eeprom_none, /* No NVM support */ + e1000_num_eeprom_types } e1000_eeprom_type; /* Media Types */ typedef enum { - e1000_media_type_copper = 0, - e1000_media_type_fiber = 1, - e1000_media_type_internal_serdes = 2, - e1000_num_media_types + e1000_media_type_copper = 0, + e1000_media_type_fiber = 1, + e1000_media_type_internal_serdes = 2, + e1000_num_media_types } e1000_media_type; typedef enum { - e1000_10_half = 0, - e1000_10_full = 1, - e1000_100_half = 2, - e1000_100_full = 3 + e1000_10_half = 0, + e1000_10_full = 1, + e1000_100_half = 2, + e1000_100_full = 3 } e1000_speed_duplex_type; /* Flow Control Settings */ typedef enum { - E1000_FC_NONE = 0, - E1000_FC_RX_PAUSE = 1, - E1000_FC_TX_PAUSE = 2, - E1000_FC_FULL = 3, - E1000_FC_DEFAULT = 0xFF + E1000_FC_NONE = 0, + E1000_FC_RX_PAUSE = 1, + E1000_FC_TX_PAUSE = 2, + E1000_FC_FULL = 3, + E1000_FC_DEFAULT = 0xFF } e1000_fc_type; struct e1000_shadow_ram { - u16 eeprom_word; - bool modified; + u16 eeprom_word; + bool modified; }; /* PCI bus types */ typedef enum { - e1000_bus_type_unknown = 0, - e1000_bus_type_pci, - e1000_bus_type_pcix, - e1000_bus_type_pci_express, - e1000_bus_type_reserved + e1000_bus_type_unknown = 0, + e1000_bus_type_pci, + e1000_bus_type_pcix, + e1000_bus_type_reserved } e1000_bus_type; /* PCI bus speeds */ typedef enum { - e1000_bus_speed_unknown = 0, - e1000_bus_speed_33, - e1000_bus_speed_66, - e1000_bus_speed_100, - e1000_bus_speed_120, - e1000_bus_speed_133, - e1000_bus_speed_2500, - e1000_bus_speed_reserved + e1000_bus_speed_unknown = 0, + e1000_bus_speed_33, + e1000_bus_speed_66, + e1000_bus_speed_100, + e1000_bus_speed_120, + e1000_bus_speed_133, + e1000_bus_speed_reserved } e1000_bus_speed; /* PCI bus widths */ typedef enum { - e1000_bus_width_unknown = 0, - /* These PCIe values should literally match the possible return values - * from config space */ - e1000_bus_width_pciex_1 = 1, - e1000_bus_width_pciex_2 = 2, - e1000_bus_width_pciex_4 = 4, - e1000_bus_width_32, - e1000_bus_width_64, - e1000_bus_width_reserved + e1000_bus_width_unknown = 0, + e1000_bus_width_32, + e1000_bus_width_64, + e1000_bus_width_reserved } e1000_bus_width; /* PHY status info structure and supporting enums */ typedef enum { - e1000_cable_length_50 = 0, - e1000_cable_length_50_80, - e1000_cable_length_80_110, - e1000_cable_length_110_140, - e1000_cable_length_140, - e1000_cable_length_undefined = 0xFF + e1000_cable_length_50 = 0, + e1000_cable_length_50_80, + e1000_cable_length_80_110, + e1000_cable_length_110_140, + e1000_cable_length_140, + e1000_cable_length_undefined = 0xFF } e1000_cable_length; typedef enum { - e1000_gg_cable_length_60 = 0, - e1000_gg_cable_length_60_115 = 1, - e1000_gg_cable_length_115_150 = 2, - e1000_gg_cable_length_150 = 4 + e1000_gg_cable_length_60 = 0, + e1000_gg_cable_length_60_115 = 1, + e1000_gg_cable_length_115_150 = 2, + e1000_gg_cable_length_150 = 4 } e1000_gg_cable_length; typedef enum { - e1000_igp_cable_length_10 = 10, - e1000_igp_cable_length_20 = 20, - e1000_igp_cable_length_30 = 30, - e1000_igp_cable_length_40 = 40, - e1000_igp_cable_length_50 = 50, - e1000_igp_cable_length_60 = 60, - e1000_igp_cable_length_70 = 70, - e1000_igp_cable_length_80 = 80, - e1000_igp_cable_length_90 = 90, - e1000_igp_cable_length_100 = 100, - e1000_igp_cable_length_110 = 110, - e1000_igp_cable_length_115 = 115, - e1000_igp_cable_length_120 = 120, - e1000_igp_cable_length_130 = 130, - e1000_igp_cable_length_140 = 140, - e1000_igp_cable_length_150 = 150, - e1000_igp_cable_length_160 = 160, - e1000_igp_cable_length_170 = 170, - e1000_igp_cable_length_180 = 180 + e1000_igp_cable_length_10 = 10, + e1000_igp_cable_length_20 = 20, + e1000_igp_cable_length_30 = 30, + e1000_igp_cable_length_40 = 40, + e1000_igp_cable_length_50 = 50, + e1000_igp_cable_length_60 = 60, + e1000_igp_cable_length_70 = 70, + e1000_igp_cable_length_80 = 80, + e1000_igp_cable_length_90 = 90, + e1000_igp_cable_length_100 = 100, + e1000_igp_cable_length_110 = 110, + e1000_igp_cable_length_115 = 115, + e1000_igp_cable_length_120 = 120, + e1000_igp_cable_length_130 = 130, + e1000_igp_cable_length_140 = 140, + e1000_igp_cable_length_150 = 150, + e1000_igp_cable_length_160 = 160, + e1000_igp_cable_length_170 = 170, + e1000_igp_cable_length_180 = 180 } e1000_igp_cable_length; typedef enum { - e1000_10bt_ext_dist_enable_normal = 0, - e1000_10bt_ext_dist_enable_lower, - e1000_10bt_ext_dist_enable_undefined = 0xFF + e1000_10bt_ext_dist_enable_normal = 0, + e1000_10bt_ext_dist_enable_lower, + e1000_10bt_ext_dist_enable_undefined = 0xFF } e1000_10bt_ext_dist_enable; typedef enum { - e1000_rev_polarity_normal = 0, - e1000_rev_polarity_reversed, - e1000_rev_polarity_undefined = 0xFF + e1000_rev_polarity_normal = 0, + e1000_rev_polarity_reversed, + e1000_rev_polarity_undefined = 0xFF } e1000_rev_polarity; typedef enum { - e1000_downshift_normal = 0, - e1000_downshift_activated, - e1000_downshift_undefined = 0xFF + e1000_downshift_normal = 0, + e1000_downshift_activated, + e1000_downshift_undefined = 0xFF } e1000_downshift; typedef enum { - e1000_smart_speed_default = 0, - e1000_smart_speed_on, - e1000_smart_speed_off + e1000_smart_speed_default = 0, + e1000_smart_speed_on, + e1000_smart_speed_off } e1000_smart_speed; typedef enum { - e1000_polarity_reversal_enabled = 0, - e1000_polarity_reversal_disabled, - e1000_polarity_reversal_undefined = 0xFF + e1000_polarity_reversal_enabled = 0, + e1000_polarity_reversal_disabled, + e1000_polarity_reversal_undefined = 0xFF } e1000_polarity_reversal; typedef enum { - e1000_auto_x_mode_manual_mdi = 0, - e1000_auto_x_mode_manual_mdix, - e1000_auto_x_mode_auto1, - e1000_auto_x_mode_auto2, - e1000_auto_x_mode_undefined = 0xFF + e1000_auto_x_mode_manual_mdi = 0, + e1000_auto_x_mode_manual_mdix, + e1000_auto_x_mode_auto1, + e1000_auto_x_mode_auto2, + e1000_auto_x_mode_undefined = 0xFF } e1000_auto_x_mode; typedef enum { - e1000_1000t_rx_status_not_ok = 0, - e1000_1000t_rx_status_ok, - e1000_1000t_rx_status_undefined = 0xFF + e1000_1000t_rx_status_not_ok = 0, + e1000_1000t_rx_status_ok, + e1000_1000t_rx_status_undefined = 0xFF } e1000_1000t_rx_status; typedef enum { e1000_phy_m88 = 0, e1000_phy_igp, - e1000_phy_igp_2, - e1000_phy_gg82563, - e1000_phy_igp_3, - e1000_phy_ife, e1000_phy_undefined = 0xFF } e1000_phy_type; typedef enum { - e1000_ms_hw_default = 0, - e1000_ms_force_master, - e1000_ms_force_slave, - e1000_ms_auto + e1000_ms_hw_default = 0, + e1000_ms_force_master, + e1000_ms_force_slave, + e1000_ms_auto } e1000_ms_type; typedef enum { - e1000_ffe_config_enabled = 0, - e1000_ffe_config_active, - e1000_ffe_config_blocked + e1000_ffe_config_enabled = 0, + e1000_ffe_config_active, + e1000_ffe_config_blocked } e1000_ffe_config; typedef enum { - e1000_dsp_config_disabled = 0, - e1000_dsp_config_enabled, - e1000_dsp_config_activated, - e1000_dsp_config_undefined = 0xFF + e1000_dsp_config_disabled = 0, + e1000_dsp_config_enabled, + e1000_dsp_config_activated, + e1000_dsp_config_undefined = 0xFF } e1000_dsp_config; struct e1000_phy_info { - e1000_cable_length cable_length; - e1000_10bt_ext_dist_enable extended_10bt_distance; - e1000_rev_polarity cable_polarity; - e1000_downshift downshift; - e1000_polarity_reversal polarity_correction; - e1000_auto_x_mode mdix_mode; - e1000_1000t_rx_status local_rx; - e1000_1000t_rx_status remote_rx; + e1000_cable_length cable_length; + e1000_10bt_ext_dist_enable extended_10bt_distance; + e1000_rev_polarity cable_polarity; + e1000_downshift downshift; + e1000_polarity_reversal polarity_correction; + e1000_auto_x_mode mdix_mode; + e1000_1000t_rx_status local_rx; + e1000_1000t_rx_status remote_rx; }; struct e1000_phy_stats { - u32 idle_errors; - u32 receive_errors; + u32 idle_errors; + u32 receive_errors; }; struct e1000_eeprom_info { - e1000_eeprom_type type; - u16 word_size; - u16 opcode_bits; - u16 address_bits; - u16 delay_usec; - u16 page_size; - bool use_eerd; - bool use_eewr; + e1000_eeprom_type type; + u16 word_size; + u16 opcode_bits; + u16 address_bits; + u16 delay_usec; + u16 page_size; }; /* Flex ASF Information */ #define E1000_HOST_IF_MAX_SIZE 2048 typedef enum { - e1000_byte_align = 0, - e1000_word_align = 1, - e1000_dword_align = 2 + e1000_byte_align = 0, + e1000_word_align = 1, + e1000_dword_align = 2 } e1000_align_type; - - /* Error Codes */ #define E1000_SUCCESS 0 #define E1000_ERR_EEPROM 1 @@ -301,7 +279,6 @@ typedef enum { #define E1000_ERR_MASTER_REQUESTS_PENDING 10 #define E1000_ERR_HOST_INTERFACE_COMMAND 11 #define E1000_BLK_PHY_RESET 12 -#define E1000_ERR_SWFW_SYNC 13 #define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \ (((_value) & 0xff00) >> 8)) @@ -318,19 +295,17 @@ s32 e1000_setup_link(struct e1000_hw *hw); s32 e1000_phy_setup_autoneg(struct e1000_hw *hw); void e1000_config_collision_dist(struct e1000_hw *hw); s32 e1000_check_for_link(struct e1000_hw *hw); -s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex); s32 e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ -s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data); +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data); s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data); s32 e1000_phy_hw_reset(struct e1000_hw *hw); s32 e1000_phy_reset(struct e1000_hw *hw); s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); s32 e1000_validate_mdi_setting(struct e1000_hw *hw); -void e1000_phy_powerdown_workaround(struct e1000_hw *hw); - /* EEPROM Functions */ s32 e1000_init_eeprom_params(struct e1000_hw *hw); @@ -338,66 +313,63 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw); u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw); #define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 -#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ -#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ #define E1000_MNG_IAMT_MODE 0x3 #define E1000_MNG_ICH_IAMT_MODE 0x2 -#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ -#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ #define E1000_VFTA_ENTRY_SHIFT 0x5 #define E1000_VFTA_ENTRY_MASK 0x7F #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F struct e1000_host_mng_command_header { - u8 command_id; - u8 checksum; - u16 reserved1; - u16 reserved2; - u16 command_length; + u8 command_id; + u8 checksum; + u16 reserved1; + u16 reserved2; + u16 command_length; }; struct e1000_host_mng_command_info { - struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ - u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/ + struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */ }; #ifdef __BIG_ENDIAN -struct e1000_host_mng_dhcp_cookie{ - u32 signature; - u16 vlan_id; - u8 reserved0; - u8 status; - u32 reserved1; - u8 checksum; - u8 reserved3; - u16 reserved2; +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u16 vlan_id; + u8 reserved0; + u8 status; + u32 reserved1; + u8 checksum; + u8 reserved3; + u16 reserved2; }; #else -struct e1000_host_mng_dhcp_cookie{ - u32 signature; - u8 status; - u8 reserved0; - u16 vlan_id; - u32 reserved1; - u16 reserved2; - u8 reserved3; - u8 checksum; +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u8 status; + u8 reserved0; + u16 vlan_id; + u32 reserved1; + u16 reserved2; + u8 reserved3; + u8 checksum; }; #endif -s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, - u16 length); bool e1000_check_mng_mode(struct e1000_hw *hw); -bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); -s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data); +s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data); s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw); s32 e1000_update_eeprom_checksum(struct e1000_hw *hw); -s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data); -s32 e1000_read_mac_addr(struct e1000_hw * hw); +s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data); +s32 e1000_read_mac_addr(struct e1000_hw *hw); /* Filters (multicast, vlan, receive) */ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr); @@ -417,18 +389,15 @@ s32 e1000_blink_led_start(struct e1000_hw *hw); /* Everything else */ void e1000_reset_adaptive(struct e1000_hw *hw); void e1000_update_adaptive(struct e1000_hw *hw); -void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr); +void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, + u32 frame_len, u8 * mac_addr); void e1000_get_bus_info(struct e1000_hw *hw); void e1000_pci_set_mwi(struct e1000_hw *hw); void e1000_pci_clear_mwi(struct e1000_hw *hw); -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc); int e1000_pcix_get_mmrbc(struct e1000_hw *hw); /* Port I/O is only supported on 82544 and newer */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value); -s32 e1000_disable_pciex_master(struct e1000_hw *hw); -s32 e1000_check_phy_reset_block(struct e1000_hw *hw); - #define E1000_READ_REG_IO(a, reg) \ e1000_read_reg_io((a), E1000_##reg) @@ -471,36 +440,7 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define E1000_DEV_ID_82547EI 0x1019 #define E1000_DEV_ID_82547EI_MOBILE 0x101A -#define E1000_DEV_ID_82571EB_COPPER 0x105E -#define E1000_DEV_ID_82571EB_FIBER 0x105F -#define E1000_DEV_ID_82571EB_SERDES 0x1060 -#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 -#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5 -#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5 -#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC -#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9 -#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA -#define E1000_DEV_ID_82572EI_COPPER 0x107D -#define E1000_DEV_ID_82572EI_FIBER 0x107E -#define E1000_DEV_ID_82572EI_SERDES 0x107F -#define E1000_DEV_ID_82572EI 0x10B9 -#define E1000_DEV_ID_82573E 0x108B -#define E1000_DEV_ID_82573E_IAMT 0x108C -#define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 -#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 -#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 -#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA -#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB - -#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 -#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A -#define E1000_DEV_ID_ICH8_IGP_C 0x104B -#define E1000_DEV_ID_ICH8_IFE 0x104C -#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4 -#define E1000_DEV_ID_ICH8_IFE_G 0x10C5 -#define E1000_DEV_ID_ICH8_IGP_M 0x104D - #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -523,21 +463,20 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); /* The sizes (in bytes) of a ethernet packet */ #define ENET_HEADER_SIZE 14 -#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ +#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ #define ETHERNET_FCS_SIZE 4 #define MINIMUM_ETHERNET_PACKET_SIZE \ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) #define CRC_LENGTH ETHERNET_FCS_SIZE #define MAX_JUMBO_FRAME_SIZE 0x3F00 - /* 802.1q VLAN Packet Sizes */ -#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ /* Ethertype field values */ -#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ -#define ETHERNET_IP_TYPE 0x0800 /* IP packets */ -#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ +#define ETHERNET_IP_TYPE 0x0800 /* IP packets */ +#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */ /* Packet Header defines */ #define IP_PROTOCOL_TCP 6 @@ -567,15 +506,6 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) -/* Additional interrupts need to be handled for e1000_ich8lan: - DSW = The FW changed the status of the DISSW bit in FWSM - PHYINT = The LAN connected device generates an interrupt - EPRST = Manageability reset event */ -#define IMS_ICH8LAN_ENABLE_MASK (\ - E1000_IMS_DSW | \ - E1000_IMS_PHYINT | \ - E1000_IMS_EPRST) - /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We * reserve one of these spots for our directed address, allowing us room for @@ -583,100 +513,98 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw); */ #define E1000_RAR_ENTRIES 15 -#define E1000_RAR_ENTRIES_ICH8LAN 6 - #define MIN_NUMBER_OF_DESCRIPTORS 8 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* Receive Descriptor */ struct e1000_rx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ - __le16 special; + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 length; /* Length of data DMAed into data buffer */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + __le16 special; }; /* Receive Descriptor - Extended */ union e1000_rx_desc_extended { - struct { - __le64 buffer_addr; - __le64 reserved; - } read; - struct { - struct { - __le32 mrq; /* Multiple Rx Queues */ - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length; - __le16 vlan; /* VLAN tag */ - } upper; - } wb; /* writeback */ + struct { + __le64 buffer_addr; + __le64 reserved; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ }; #define MAX_PS_BUFFERS 4 /* Receive Descriptor - Packet Split */ union e1000_rx_desc_packet_split { - struct { - /* one buffer for protocol header(s), three data buffers */ - __le64 buffer_addr[MAX_PS_BUFFERS]; - } read; - struct { - struct { - __le32 mrq; /* Multiple Rx Queues */ - union { - __le32 rss; /* RSS Hash */ - struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ - } csum_ip; - } hi_dword; - } lower; - struct { - __le32 status_error; /* ext status/error */ - __le16 length0; /* length of buffer 0 */ - __le16 vlan; /* VLAN tag */ - } middle; - struct { - __le16 header_status; - __le16 length[3]; /* length of buffers 1-3 */ - } upper; - __le64 reserved; - } wb; /* writeback */ + struct { + /* one buffer for protocol header(s), three data buffers */ + __le64 buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length0; /* length of buffer 0 */ + __le16 vlan; /* VLAN tag */ + } middle; + struct { + __le16 header_status; + __le16 length[3]; /* length of buffers 1-3 */ + } upper; + __le64 reserved; + } wb; /* writeback */ }; -/* Receive Decriptor bit definitions */ -#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ -#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ -#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ -#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ -#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ -#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ -#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ -#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ -#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ -#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ -#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ -#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ -#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ -#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ -#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ -#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ -#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ -#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ -#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +/* Receive Descriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ #define E1000_RXD_SPC_PRI_SHIFT 13 -#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ +#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ #define E1000_RXD_SPC_CFI_SHIFT 12 #define E1000_RXDEXT_STATERR_CE 0x01000000 @@ -698,7 +626,6 @@ union e1000_rx_desc_packet_split { E1000_RXD_ERR_CXE | \ E1000_RXD_ERR_RXE) - /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ E1000_RXDEXT_STATERR_CE | \ @@ -707,152 +634,145 @@ union e1000_rx_desc_packet_split { E1000_RXDEXT_STATERR_CXE | \ E1000_RXDEXT_STATERR_RXE) - /* Transmit Descriptor */ struct e1000_tx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 cso; /* Checksum offset */ - u8 cmd; /* Descriptor control */ - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 css; /* Checksum start */ - __le16 special; - } fields; - } upper; + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + __le16 special; + } fields; + } upper; }; /* Transmit Descriptor bit definitions */ -#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ -#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ -#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ -#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ -#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ -#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ -#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ -#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ -#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ -#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ -#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ -#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ -#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ -#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ +#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ +#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ +#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ +#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ +#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ +#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ +#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ +#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ /* Offload Context Descriptor */ struct e1000_context_desc { - union { - __le32 ip_config; - struct { - u8 ipcss; /* IP checksum start */ - u8 ipcso; /* IP checksum offset */ - __le16 ipcse; /* IP checksum end */ - } ip_fields; - } lower_setup; - union { - __le32 tcp_config; - struct { - u8 tucss; /* TCP checksum start */ - u8 tucso; /* TCP checksum offset */ - __le16 tucse; /* TCP checksum end */ - } tcp_fields; - } upper_setup; - __le32 cmd_and_length; /* */ - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 hdr_len; /* Header length */ - __le16 mss; /* Maximum segment size */ - } fields; - } tcp_seg_setup; + union { + __le32 ip_config; + struct { + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + __le16 ipcse; /* IP checksum end */ + } ip_fields; + } lower_setup; + union { + __le32 tcp_config; + struct { + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + __le16 tucse; /* TCP checksum end */ + } tcp_fields; + } upper_setup; + __le32 cmd_and_length; /* */ + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + __le16 mss; /* Maximum segment size */ + } fields; + } tcp_seg_setup; }; /* Offload data descriptor */ struct e1000_data_desc { - __le64 buffer_addr; /* Address of the descriptor's buffer address */ - union { - __le32 data; - struct { - __le16 length; /* Data buffer length */ - u8 typ_len_ext; /* */ - u8 cmd; /* */ - } flags; - } lower; - union { - __le32 data; - struct { - u8 status; /* Descriptor status */ - u8 popts; /* Packet Options */ - __le16 special; /* */ - } fields; - } upper; + __le64 buffer_addr; /* Address of the descriptor's buffer address */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 typ_len_ext; /* */ + u8 cmd; /* */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ + __le16 special; /* */ + } fields; + } upper; }; /* Filters */ -#define E1000_NUM_UNICAST 16 /* Unicast filter entries */ -#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ -#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ - -#define E1000_NUM_UNICAST_ICH8LAN 7 -#define E1000_MC_TBL_SIZE_ICH8LAN 32 - +#define E1000_NUM_UNICAST 16 /* Unicast filter entries */ +#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ /* Receive Address Register */ struct e1000_rar { - volatile __le32 low; /* receive address low */ - volatile __le32 high; /* receive address high */ + volatile __le32 low; /* receive address low */ + volatile __le32 high; /* receive address high */ }; /* Number of entries in the Multicast Table Array (MTA). */ #define E1000_NUM_MTA_REGISTERS 128 -#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32 /* IPv4 Address Table Entry */ struct e1000_ipv4_at_entry { - volatile u32 ipv4_addr; /* IP Address (RW) */ - volatile u32 reserved; + volatile u32 ipv4_addr; /* IP Address (RW) */ + volatile u32 reserved; }; /* Four wakeup IP addresses are supported */ #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4 #define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX -#define E1000_IP4AT_SIZE_ICH8LAN 3 #define E1000_IP6AT_SIZE 1 /* IPv6 Address Table Entry */ struct e1000_ipv6_at_entry { - volatile u8 ipv6_addr[16]; + volatile u8 ipv6_addr[16]; }; /* Flexible Filter Length Table Entry */ struct e1000_fflt_entry { - volatile u32 length; /* Flexible Filter Length (RW) */ - volatile u32 reserved; + volatile u32 length; /* Flexible Filter Length (RW) */ + volatile u32 reserved; }; /* Flexible Filter Mask Table Entry */ struct e1000_ffmt_entry { - volatile u32 mask; /* Flexible Filter Mask (RW) */ - volatile u32 reserved; + volatile u32 mask; /* Flexible Filter Mask (RW) */ + volatile u32 reserved; }; /* Flexible Filter Value Table Entry */ struct e1000_ffvt_entry { - volatile u32 value; /* Flexible Filter Value (RW) */ - volatile u32 reserved; + volatile u32 value; /* Flexible Filter Value (RW) */ + volatile u32 reserved; }; /* Four Flexible Filters are supported */ @@ -879,211 +799,211 @@ struct e1000_ffvt_entry { * R/clr - register is read only and is cleared when read * A - register array */ -#define E1000_CTRL 0x00000 /* Device Control - RW */ -#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ -#define E1000_STATUS 0x00008 /* Device Status - RO */ -#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ -#define E1000_EERD 0x00014 /* EEPROM Read - RW */ -#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ -#define E1000_FLA 0x0001C /* Flash Access - RW */ -#define E1000_MDIC 0x00020 /* MDI Control - RW */ -#define E1000_SCTL 0x00024 /* SerDes Control - RW */ -#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ -#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ -#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ -#define E1000_FCT 0x00030 /* Flow Control Type - RW */ -#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ -#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ -#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ -#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ -#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ -#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ -#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ -#define E1000_RCTL 0x00100 /* RX Control - RW */ -#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ -#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ -#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ -#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ -#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ -#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ -#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ -#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ -#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ -#define E1000_TCTL 0x00400 /* TX Control - RW */ -#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ -#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ -#define E1000_TBT 0x00448 /* TX Burst Timer - RW */ -#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ -#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ -#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ -#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ -#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_RCTL 0x00100 /* RX Control - RW */ +#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ +#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ +#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ +#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ +#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ +#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ +#define E1000_TCTL 0x00400 /* TX Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ +#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ +#define E1000_TBT 0x00448 /* TX Burst Timer - RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ #define FEXTNVM_SW_CONFIG 0x0001 -#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ -#define E1000_PBS 0x01008 /* Packet Buffer Size */ -#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ #define E1000_FLASH_UPDATES 1000 -#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ -#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ -#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ -#define E1000_FLSWCTL 0x01030 /* FLASH control register */ -#define E1000_FLSWDATA 0x01034 /* FLASH data register */ -#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ -#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ -#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ -#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ -#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ -#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ -#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ -#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ -#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ -#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ -#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ -#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ -#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ -#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ -#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ -#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ -#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ -#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ -#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ -#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ -#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ -#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ -#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ -#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ -#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ -#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ -#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ -#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ -#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ -#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ -#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ -#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ -#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ -#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ -#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ -#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ -#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ -#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ -#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ -#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ -#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ -#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ -#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ -#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ -#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ -#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ -#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ -#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ -#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ -#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ -#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ -#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ -#define E1000_COLC 0x04028 /* Collision Count - R/clr */ -#define E1000_DC 0x04030 /* Defer Count - R/clr */ -#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ -#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ -#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ -#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ -#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ -#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ -#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ -#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ -#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ -#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ -#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ -#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ -#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ -#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ -#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ -#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ -#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ -#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ -#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ -#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ -#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ -#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ -#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ -#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ -#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ -#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ -#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ -#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ -#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ -#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ -#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ -#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ -#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ -#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ -#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ -#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ -#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ -#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ -#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ -#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ -#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ -#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ -#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ -#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ -#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ -#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ -#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ -#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ -#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ -#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ -#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ -#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ -#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ -#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ -#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ -#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ -#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ -#define E1000_RA 0x05400 /* Receive Address - RW Array */ -#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ -#define E1000_WUC 0x05800 /* Wakeup Control - RW */ -#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ -#define E1000_WUS 0x05810 /* Wakeup Status - RO */ -#define E1000_MANC 0x05820 /* Management Control - RW */ -#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ -#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ -#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ -#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ -#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ -#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ -#define E1000_HOST_IF 0x08800 /* Host Interface */ -#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ -#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ - -#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ -#define E1000_MDPHYA 0x0003C /* PHY address - RW */ -#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */ -#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ - -#define E1000_GCR 0x05B00 /* PCI-Ex Control */ -#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ -#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ -#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ -#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ -#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ -#define E1000_SWSM 0x05B50 /* SW Semaphore */ -#define E1000_FWSM 0x05B54 /* FW Semaphore */ -#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ -#define E1000_HICR 0x08F00 /* Host Inteface Control */ +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLSWCTL 0x01030 /* FLASH control register */ +#define E1000_FLSWDATA 0x01034 /* FLASH data register */ +#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ +#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ +#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ +#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ +#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ +#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ +#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ +#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ +#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ +#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ +#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ +#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ +#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ +#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ +#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ +#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ +#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ +#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ +#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ +#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ +#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ +#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ +#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ +#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ +#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ +#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ +#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ +#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ +#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ +#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ +#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ +#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ +#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ +#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control */ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ +#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ +#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ +#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ + +#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MDPHYA 0x0003C /* PHY address - RW */ +#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */ +#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ + +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ /* RSS registers */ -#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ -#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ -#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ -#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ -#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ -#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ +#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -1123,19 +1043,19 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN0 E1000_82542_RDLEN #define E1000_82542_RDH0 E1000_82542_RDH #define E1000_82542_RDT0 E1000_82542_RDT -#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication - * RX Control - RW */ +#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication + * RX Control - RW */ #define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8)) -#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ -#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ -#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ -#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ -#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ -#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ -#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ -#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ -#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ -#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ +#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ +#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ +#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ +#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ +#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ +#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ +#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ +#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ +#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ +#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ #define E1000_82542_RDTR1 0x00130 #define E1000_82542_RDBAL1 0x00138 #define E1000_82542_RDBAH1 0x0013C @@ -1302,288 +1222,281 @@ struct e1000_ffvt_entry { #define E1000_82542_RSSIR E1000_RSSIR #define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA #define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC -#define E1000_82542_MANC2H E1000_MANC2H /* Statistics counters collected by the MAC */ struct e1000_hw_stats { - u64 crcerrs; - u64 algnerrc; - u64 symerrs; - u64 rxerrc; - u64 txerrc; - u64 mpc; - u64 scc; - u64 ecol; - u64 mcc; - u64 latecol; - u64 colc; - u64 dc; - u64 tncrs; - u64 sec; - u64 cexterr; - u64 rlec; - u64 xonrxc; - u64 xontxc; - u64 xoffrxc; - u64 xofftxc; - u64 fcruc; - u64 prc64; - u64 prc127; - u64 prc255; - u64 prc511; - u64 prc1023; - u64 prc1522; - u64 gprc; - u64 bprc; - u64 mprc; - u64 gptc; - u64 gorcl; - u64 gorch; - u64 gotcl; - u64 gotch; - u64 rnbc; - u64 ruc; - u64 rfc; - u64 roc; - u64 rlerrc; - u64 rjc; - u64 mgprc; - u64 mgpdc; - u64 mgptc; - u64 torl; - u64 torh; - u64 totl; - u64 toth; - u64 tpr; - u64 tpt; - u64 ptc64; - u64 ptc127; - u64 ptc255; - u64 ptc511; - u64 ptc1023; - u64 ptc1522; - u64 mptc; - u64 bptc; - u64 tsctc; - u64 tsctfc; - u64 iac; - u64 icrxptc; - u64 icrxatc; - u64 ictxptc; - u64 ictxatc; - u64 ictxqec; - u64 ictxqmtc; - u64 icrxdmtc; - u64 icrxoc; + u64 crcerrs; + u64 algnerrc; + u64 symerrs; + u64 rxerrc; + u64 txerrc; + u64 mpc; + u64 scc; + u64 ecol; + u64 mcc; + u64 latecol; + u64 colc; + u64 dc; + u64 tncrs; + u64 sec; + u64 cexterr; + u64 rlec; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 fcruc; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorcl; + u64 gorch; + u64 gotcl; + u64 gotch; + u64 rnbc; + u64 ruc; + u64 rfc; + u64 roc; + u64 rlerrc; + u64 rjc; + u64 mgprc; + u64 mgpdc; + u64 mgptc; + u64 torl; + u64 torh; + u64 totl; + u64 toth; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 tsctc; + u64 tsctfc; + u64 iac; + u64 icrxptc; + u64 icrxatc; + u64 ictxptc; + u64 ictxatc; + u64 ictxqec; + u64 ictxqmtc; + u64 icrxdmtc; + u64 icrxoc; }; /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - u8 __iomem *hw_addr; - u8 __iomem *flash_address; - e1000_mac_type mac_type; - e1000_phy_type phy_type; - u32 phy_init_script; - e1000_media_type media_type; - void *back; - struct e1000_shadow_ram *eeprom_shadow_ram; - u32 flash_bank_size; - u32 flash_base_addr; - e1000_fc_type fc; - e1000_bus_speed bus_speed; - e1000_bus_width bus_width; - e1000_bus_type bus_type; + u8 __iomem *hw_addr; + u8 __iomem *flash_address; + e1000_mac_type mac_type; + e1000_phy_type phy_type; + u32 phy_init_script; + e1000_media_type media_type; + void *back; + struct e1000_shadow_ram *eeprom_shadow_ram; + u32 flash_bank_size; + u32 flash_base_addr; + e1000_fc_type fc; + e1000_bus_speed bus_speed; + e1000_bus_width bus_width; + e1000_bus_type bus_type; struct e1000_eeprom_info eeprom; - e1000_ms_type master_slave; - e1000_ms_type original_master_slave; - e1000_ffe_config ffe_config_state; - u32 asf_firmware_present; - u32 eeprom_semaphore_present; - u32 swfw_sync_present; - u32 swfwhw_semaphore_present; - unsigned long io_base; - u32 phy_id; - u32 phy_revision; - u32 phy_addr; - u32 original_fc; - u32 txcw; - u32 autoneg_failed; - u32 max_frame_size; - u32 min_frame_size; - u32 mc_filter_type; - u32 num_mc_addrs; - u32 collision_delta; - u32 tx_packet_delta; - u32 ledctl_default; - u32 ledctl_mode1; - u32 ledctl_mode2; - bool tx_pkt_filtering; + e1000_ms_type master_slave; + e1000_ms_type original_master_slave; + e1000_ffe_config ffe_config_state; + u32 asf_firmware_present; + u32 eeprom_semaphore_present; + unsigned long io_base; + u32 phy_id; + u32 phy_revision; + u32 phy_addr; + u32 original_fc; + u32 txcw; + u32 autoneg_failed; + u32 max_frame_size; + u32 min_frame_size; + u32 mc_filter_type; + u32 num_mc_addrs; + u32 collision_delta; + u32 tx_packet_delta; + u32 ledctl_default; + u32 ledctl_mode1; + u32 ledctl_mode2; + bool tx_pkt_filtering; struct e1000_host_mng_dhcp_cookie mng_cookie; - u16 phy_spd_default; - u16 autoneg_advertised; - u16 pci_cmd_word; - u16 fc_high_water; - u16 fc_low_water; - u16 fc_pause_time; - u16 current_ifs_val; - u16 ifs_min_val; - u16 ifs_max_val; - u16 ifs_step_size; - u16 ifs_ratio; - u16 device_id; - u16 vendor_id; - u16 subsystem_id; - u16 subsystem_vendor_id; - u8 revision_id; - u8 autoneg; - u8 mdix; - u8 forced_speed_duplex; - u8 wait_autoneg_complete; - u8 dma_fairness; - u8 mac_addr[NODE_ADDRESS_SIZE]; - u8 perm_mac_addr[NODE_ADDRESS_SIZE]; - bool disable_polarity_correction; - bool speed_downgraded; - e1000_smart_speed smart_speed; - e1000_dsp_config dsp_config_state; - bool get_link_status; - bool serdes_link_down; - bool tbi_compatibility_en; - bool tbi_compatibility_on; - bool laa_is_present; - bool phy_reset_disable; - bool initialize_hw_bits_disable; - bool fc_send_xon; - bool fc_strict_ieee; - bool report_tx_early; - bool adaptive_ifs; - bool ifs_params_forced; - bool in_ifs_mode; - bool mng_reg_access_disabled; - bool leave_av_bit_off; - bool kmrn_lock_loss_workaround_disabled; - bool bad_tx_carr_stats_fd; - bool has_manc2h; - bool rx_needs_kicking; - bool has_smbus; + u16 phy_spd_default; + u16 autoneg_advertised; + u16 pci_cmd_word; + u16 fc_high_water; + u16 fc_low_water; + u16 fc_pause_time; + u16 current_ifs_val; + u16 ifs_min_val; + u16 ifs_max_val; + u16 ifs_step_size; + u16 ifs_ratio; + u16 device_id; + u16 vendor_id; + u16 subsystem_id; + u16 subsystem_vendor_id; + u8 revision_id; + u8 autoneg; + u8 mdix; + u8 forced_speed_duplex; + u8 wait_autoneg_complete; + u8 dma_fairness; + u8 mac_addr[NODE_ADDRESS_SIZE]; + u8 perm_mac_addr[NODE_ADDRESS_SIZE]; + bool disable_polarity_correction; + bool speed_downgraded; + e1000_smart_speed smart_speed; + e1000_dsp_config dsp_config_state; + bool get_link_status; + bool serdes_has_link; + bool tbi_compatibility_en; + bool tbi_compatibility_on; + bool laa_is_present; + bool phy_reset_disable; + bool initialize_hw_bits_disable; + bool fc_send_xon; + bool fc_strict_ieee; + bool report_tx_early; + bool adaptive_ifs; + bool ifs_params_forced; + bool in_ifs_mode; + bool mng_reg_access_disabled; + bool leave_av_bit_off; + bool bad_tx_carr_stats_fd; + bool has_smbus; }; - -#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ -#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ -#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ -#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ -#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ -#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ -#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ -#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ +#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ +#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ +#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ +#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ +#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ /* Register Bit Masks */ /* Device Control */ -#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ -#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ -#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ -#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ -#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ -#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ -#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ -#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ -#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ -#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ -#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ -#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ -#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ -#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ -#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ -#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ -#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ -#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ -#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ -#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */ -#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */ -#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ -#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ -#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ -#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ -#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ -#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ -#define E1000_CTRL_RST 0x04000000 /* Global reset */ -#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ -#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ -#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ -#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ -#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ +#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ +#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ +#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ +#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ +#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */ +#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ +#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ +#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ /* Device Status */ -#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ -#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ -#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ #define E1000_STATUS_FUNC_SHIFT 2 -#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ -#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ -#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ -#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ +#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ #define E1000_STATUS_SPEED_MASK 0x000000C0 -#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ -#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ -#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ -#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion - by EEPROM/Flash */ -#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ -#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ -#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ -#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ -#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ -#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ -#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ -#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */ -#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ -#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ -#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ -#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */ -#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion + by EEPROM/Flash */ +#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ +#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ +#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ +#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ +#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ +#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ +#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ +#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */ +#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ +#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ +#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ +#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */ +#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ #define E1000_STATUS_FUSE_8 0x04000000 #define E1000_STATUS_FUSE_9 0x08000000 -#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */ -#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */ +#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */ +#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */ -/* Constants used to intrepret the masked PCI-X bus speed. */ -#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ -#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */ -#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */ +/* Constants used to interpret the masked PCI-X bus speed. */ +#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ +#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */ +#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */ /* EEPROM/Flash Control */ -#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ -#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ -#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ -#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ +#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ +#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ +#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ #define E1000_EECD_FWE_MASK 0x00000030 -#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ -#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ +#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ +#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ #define E1000_EECD_FWE_SHIFT 4 -#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ -#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ -#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ -#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ -#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type - * (0-small, 1-large) */ -#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */ +#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ +#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ +#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type + * (0-small, 1-large) */ +#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */ #ifndef E1000_EEPROM_GRANT_ATTEMPTS -#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ +#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif -#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ -#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ +#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ #define E1000_EECD_SIZE_EX_SHIFT 11 -#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ -#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ -#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ -#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ -#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ -#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ -#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ +#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ +#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ +#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ #define E1000_EECD_SECVAL_SHIFT 22 #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 @@ -1593,12 +1506,12 @@ struct e1000_hw { #define E1000_ICH_NVM_SIG_MASK 0xC0 /* EEPROM Read */ -#define E1000_EERD_START 0x00000001 /* Start Read */ -#define E1000_EERD_DONE 0x00000010 /* Read Done */ +#define E1000_EERD_START 0x00000001 /* Start Read */ +#define E1000_EERD_DONE 0x00000010 /* Read Done */ #define E1000_EERD_ADDR_SHIFT 8 -#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */ +#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */ #define E1000_EERD_DATA_SHIFT 16 -#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */ +#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */ /* SPI EEPROM Status Register */ #define EEPROM_STATUS_RDY_SPI 0x01 @@ -1608,25 +1521,25 @@ struct e1000_hw { #define EEPROM_STATUS_WPEN_SPI 0x80 /* Extended Device Control */ -#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ -#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ +#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ +#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN -#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ -#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ -#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ -#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ +#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ +#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ +#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ +#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ #define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA -#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */ -#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ -#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ -#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ -#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ -#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */ -#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ -#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ -#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ -#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ -#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ +#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ +#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ +#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */ +#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 @@ -1638,11 +1551,11 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ -#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ -#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ -#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ -#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ +#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ +#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 /* MDI Control */ @@ -1742,167 +1655,167 @@ struct e1000_hw { #define E1000_LEDCTL_MODE_LED_OFF 0xF /* Receive Address */ -#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ /* Interrupt Cause Read */ -#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ -#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ -#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ -#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ -#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ -#define E1000_ICR_RXO 0x00000040 /* rx overrun */ -#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ -#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ -#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ -#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ -#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ -#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ -#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ +#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ +#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ #define E1000_ICR_TXD_LOW 0x00008000 #define E1000_ICR_SRPD 0x00010000 -#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ -#define E1000_ICR_MNG 0x00040000 /* Manageability event */ -#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ -#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ -#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */ -#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ -#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ -#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ -#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ -#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ -#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */ +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */ +#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ +#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ +#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ +#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ +#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */ /* Interrupt Cause Set */ -#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ -#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ -#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ -#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ +#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ +#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_ICS_SRPD E1000_ICR_SRPD -#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ -#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ -#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ +#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ +#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_ICS_DSW E1000_ICR_DSW #define E1000_ICS_PHYINT E1000_ICR_PHYINT #define E1000_ICS_EPRST E1000_ICR_EPRST /* Interrupt Mask Set */ -#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ -#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ -#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ -#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ +#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMS_SRPD E1000_ICR_SRPD -#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ -#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ -#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ +#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ +#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_IMS_DSW E1000_ICR_DSW #define E1000_IMS_PHYINT E1000_ICR_PHYINT #define E1000_IMS_EPRST E1000_ICR_EPRST /* Interrupt Mask Clear */ -#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ -#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ -#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ -#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ +#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ +#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ +#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ +#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMC_SRPD E1000_ICR_SRPD -#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ -#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ -#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ -#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ -#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ -#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ +#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ +#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ +#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ +#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ +#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_IMC_DSW E1000_ICR_DSW #define E1000_IMC_PHYINT E1000_ICR_PHYINT #define E1000_IMC_EPRST E1000_ICR_EPRST /* Receive Control */ -#define E1000_RCTL_RST 0x00000001 /* Software reset */ -#define E1000_RCTL_EN 0x00000002 /* enable */ -#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ -#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ -#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ -#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ -#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ -#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ -#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ -#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ -#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ -#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ -#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ -#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ -#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ -#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ -#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ -#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ -#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ -#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ -#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ -#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +#define E1000_RCTL_RST 0x00000001 /* Software reset */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ +#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ +#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ +#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ +#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ +#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ +#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ -#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ -#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ -#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ -#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ -#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ -#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ -#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ -#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ -#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ -#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ -#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ -#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ -#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ -#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ -#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ +#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ +#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ +#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ +#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ /* Use byte values for the following shift parameters * Usage: @@ -1925,10 +1838,10 @@ struct e1000_hw { #define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 #define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 -#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ -#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ -#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ -#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ /* SW_W_SYNC definitions */ #define E1000_SWFW_EEP_SM 0x0001 @@ -1937,17 +1850,17 @@ struct e1000_hw { #define E1000_SWFW_MAC_CSR_SM 0x0008 /* Receive Descriptor */ -#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ -#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */ -#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */ -#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */ -#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */ +#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ +#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */ +#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */ +#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */ +#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */ /* Flow Control */ -#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ -#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ -#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ -#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ +#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ +#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ /* Header split receive */ #define E1000_RFCTL_ISCSI_DIS 0x00000001 @@ -1967,66 +1880,64 @@ struct e1000_hw { #define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 /* Receive Descriptor Control */ -#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ -#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ -#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ -#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ +#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ +#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ +#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ +#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ /* Transmit Descriptor Control */ -#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ -#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ -#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ -#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ -#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ -#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ -#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. - still to be processed. */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ +#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ +#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. + still to be processed. */ /* Transmit Configuration Word */ -#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ -#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ -#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ -#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ -#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ -#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ -#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ -#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ -#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ -#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ +#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ +#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ +#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ +#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ +#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ +#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ /* Receive Configuration Word */ -#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ -#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ -#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ -#define E1000_RXCW_CC 0x10000000 /* Receive config change */ -#define E1000_RXCW_C 0x20000000 /* Receive config */ -#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ -#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ +#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ +#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ +#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ +#define E1000_RXCW_CC 0x10000000 /* Receive config change */ +#define E1000_RXCW_C 0x20000000 /* Receive config */ +#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ +#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ /* Transmit Control */ -#define E1000_TCTL_RST 0x00000001 /* software reset */ -#define E1000_TCTL_EN 0x00000002 /* enable tx */ -#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ -#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ -#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ -#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ -#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ -#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ -#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ -#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ -#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ +#define E1000_TCTL_RST 0x00000001 /* software reset */ +#define E1000_TCTL_EN 0x00000002 /* enable tx */ +#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ +#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ +#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ /* Extended Transmit Control */ -#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */ -#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ - -#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000 +#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */ +#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ /* Receive Checksum Control */ -#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ -#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ -#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ -#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ -#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ -#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ +#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* Multiple Receive Queue Control */ #define E1000_MRQC_ENABLE_MASK 0x00000003 @@ -2042,141 +1953,141 @@ struct e1000_hw { /* Definitions for power management and wakeup registers */ /* Wake Up Control */ -#define E1000_WUC_APME 0x00000001 /* APM Enable */ -#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ -#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ -#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ -#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ /* Wake Up Filter Control */ -#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ -#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ -#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ -#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ -#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ -#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ -#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ -#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ -#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ -#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ -#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */ -#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ -#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */ +#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ +#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ /* Wake Up Status */ -#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */ -#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */ -#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */ -#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */ -#define E1000_WUS_BC 0x00000010 /* Broadcast Received */ -#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */ -#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */ -#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */ -#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */ -#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */ -#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */ -#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */ -#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ +#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */ +#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */ +#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */ +#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */ +#define E1000_WUS_BC 0x00000010 /* Broadcast Received */ +#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */ +#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */ +#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */ +#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */ +#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */ +#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */ +#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */ +#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ /* Management Control */ -#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ -#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ -#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ -#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ -#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ -#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ -#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ -#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ -#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ -#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery - * Filtering */ -#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ -#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ -#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ -#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ -#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ -#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ -#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address - * filtering */ -#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host - * memory */ -#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address - * filtering */ -#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ -#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ -#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ -#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ -#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ -#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ -#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ -#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ - -#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ -#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ +#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ +#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ +#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ +#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ +#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery + * Filtering */ +#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ +#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ +#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address + * filtering */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host + * memory */ +#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address + * filtering */ +#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ +#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ +#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ +#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ +#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ +#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ +#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ +#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ + +#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ +#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ /* SW Semaphore Register */ -#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ -#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ -#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ -#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ /* FW Semaphore Register */ -#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ +#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ #define E1000_FWSM_MODE_SHIFT 1 -#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ +#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ -#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ -#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ -#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ +#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ +#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ +#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ #define E1000_FWSM_SKUEL_SHIFT 29 -#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ -#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ -#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ -#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ +#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ +#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ +#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ +#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ /* FFLT Debug Register */ -#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ +#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ typedef enum { - e1000_mng_mode_none = 0, - e1000_mng_mode_asf, - e1000_mng_mode_pt, - e1000_mng_mode_ipmi, - e1000_mng_mode_host_interface_only + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_interface_only } e1000_mng_mode; -/* Host Inteface Control Register */ -#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ -#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done - * to put command in RAM */ -#define E1000_HICR_SV 0x00000004 /* Status Validity */ -#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ +/* Host Interface Control Register */ +#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ +#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done + * to put command in RAM */ +#define E1000_HICR_SV 0x00000004 /* Status Validity */ +#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ /* Host Interface Command Interface - Address range 0x8800-0x8EFF */ -#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ -#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ -#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ -#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ +#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ struct e1000_host_command_header { - u8 command_id; - u8 command_length; - u8 command_options; /* I/F bits for command, status for return */ - u8 checksum; + u8 command_id; + u8 command_length; + u8 command_options; /* I/F bits for command, status for return */ + u8 checksum; }; struct e1000_host_command_info { - struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ - u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ + struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ }; /* Host SMB register #0 */ -#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ -#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ -#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ -#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ +#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ +#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ +#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ +#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ /* Host SMB register #1 */ #define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN @@ -2185,10 +2096,10 @@ struct e1000_host_command_info { #define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT /* FW Status Register */ -#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ +#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ /* Wake Up Packet Length */ -#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ +#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ #define E1000_MDALIGN 4096 @@ -2242,24 +2153,24 @@ struct e1000_host_command_info { #define PCI_EX_LINK_WIDTH_SHIFT 4 /* EEPROM Commands - Microwire */ -#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ -#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */ -#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */ -#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */ +#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ +#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */ +#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */ +#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */ /* EEPROM Commands - SPI */ -#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ -#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ -#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ -#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ -#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ -#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ -#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ -#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ -#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ +#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ +#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ +#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ +#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ +#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ /* EEPROM Size definitions */ #define EEPROM_WORD_SIZE_SHIFT 6 @@ -2270,7 +2181,7 @@ struct e1000_host_command_info { #define EEPROM_COMPAT 0x0003 #define EEPROM_ID_LED_SETTINGS 0x0004 #define EEPROM_VERSION 0x0005 -#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ +#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A #define EEPROM_INIT_CONTROL2_REG 0x000F @@ -2283,22 +2194,16 @@ struct e1000_host_command_info { #define EEPROM_FLASH_VERSION 0x0032 #define EEPROM_CHECKSUM_REG 0x003F -#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ -#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */ +#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ +#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */ /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF -#define ID_LED_RESERVED_82573 0xF746 -#define ID_LED_DEFAULT_82573 0x1811 #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ (ID_LED_OFF1_OFF2 << 8) | \ (ID_LED_DEF1_DEF2 << 4) | \ (ID_LED_DEF1_DEF2)) -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) #define ID_LED_DEF1_DEF2 0x1 #define ID_LED_DEF1_ON2 0x2 #define ID_LED_DEF1_OFF2 0x3 @@ -2313,7 +2218,6 @@ struct e1000_host_command_info { #define IGP_ACTIVITY_LED_ENABLE 0x0300 #define IGP_LED3_MODE 0x07000000 - /* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */ #define EEPROM_SERDES_AMPLITUDE_MASK 0x000F @@ -2384,11 +2288,8 @@ struct e1000_host_command_info { #define DEFAULT_82542_TIPG_IPGR2 10 #define DEFAULT_82543_TIPG_IPGR2 6 -#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 #define E1000_TIPG_IPGR2_SHIFT 20 -#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009 -#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008 #define E1000_TXDMAC_DPP 0x00000001 /* Adaptive IFS defines */ @@ -2421,9 +2322,9 @@ struct e1000_host_command_info { #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 /* PBA constants */ -#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ -#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ -#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ +#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ +#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ +#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_20K 0x0014 #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 @@ -2432,7 +2333,7 @@ struct e1000_host_command_info { #define E1000_PBA_34K 0x0022 #define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 -#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ +#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ #define E1000_PBS_16K E1000_PBA_16K @@ -2442,9 +2343,9 @@ struct e1000_host_command_info { #define FLOW_CONTROL_TYPE 0x8808 /* The historical defaults for the flow control values are given below. */ -#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ -#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ -#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ +#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ +#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ +#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ /* PCIX Config space */ #define PCIX_COMMAND_REGISTER 0xE6 @@ -2458,7 +2359,6 @@ struct e1000_host_command_info { #define PCIX_STATUS_HI_MMRBC_4K 0x3 #define PCIX_STATUS_HI_MMRBC_2K 0x2 - /* Number of bits required to shift right the "pause" bits from the * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register. */ @@ -2479,14 +2379,11 @@ struct e1000_host_command_info { */ #define ILOS_SHIFT 3 - #define RECEIVE_BUFFER_ALIGN_SIZE (256) /* Number of milliseconds we wait for auto-negotiation to complete */ #define LINK_UP_TIMEOUT 500 -/* Number of 100 microseconds we wait for PCI Express master disable */ -#define MASTER_DISABLE_TIMEOUT 800 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ #define AUTO_READ_DONE_TIMEOUT 10 /* Number of milliseconds we wait for PHY configuration done after MAC reset */ @@ -2534,7 +2431,6 @@ struct e1000_host_command_info { (((length) > (adapter)->min_frame_size) && \ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1))))) - /* Structures, enums, and macros for the PHY */ /* Bit definitions for the Management Data IO (MDIO) and Management Data @@ -2551,49 +2447,49 @@ struct e1000_host_command_info { /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ -#define PHY_CTRL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ -#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ -#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */ +#define PHY_CTRL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */ /* M88E1000 Specific Registers */ -#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ -#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ -#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ -#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ -#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ -#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ - -#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ -#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ -#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ -#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ -#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ +#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ +#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ +#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ +#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ +#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ +#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ + +#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ +#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ +#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ +#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ +#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ #define IGP01E1000_IEEE_REGS_PAGE 0x0000 #define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 #define IGP01E1000_IEEE_FORCE_GIGA 0x0140 /* IGP01E1000 Specific Registers */ -#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ -#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ -#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ -#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ -#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ -#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ +#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ +#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ #define IGP02E1000_PHY_POWER_MGMT 0x19 -#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* IGP01E1000 AGC Registers - stores the cable length values*/ #define IGP01E1000_PHY_AGC_A 0x1172 @@ -2636,192 +2532,119 @@ struct e1000_host_command_info { #define IGP01E1000_ANALOG_REGS_PAGE 0x20C0 -/* Bits... - * 15-5: page - * 4-0: register offset - */ -#define GG82563_PAGE_SHIFT 5 -#define GG82563_REG(page, reg) \ - (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) -#define GG82563_MIN_ALT_REG 30 - -/* GG82563 Specific Registers */ -#define GG82563_PHY_SPEC_CTRL \ - GG82563_REG(0, 16) /* PHY Specific Control */ -#define GG82563_PHY_SPEC_STATUS \ - GG82563_REG(0, 17) /* PHY Specific Status */ -#define GG82563_PHY_INT_ENABLE \ - GG82563_REG(0, 18) /* Interrupt Enable */ -#define GG82563_PHY_SPEC_STATUS_2 \ - GG82563_REG(0, 19) /* PHY Specific Status 2 */ -#define GG82563_PHY_RX_ERR_CNTR \ - GG82563_REG(0, 21) /* Receive Error Counter */ -#define GG82563_PHY_PAGE_SELECT \ - GG82563_REG(0, 22) /* Page Select */ -#define GG82563_PHY_SPEC_CTRL_2 \ - GG82563_REG(0, 26) /* PHY Specific Control 2 */ -#define GG82563_PHY_PAGE_SELECT_ALT \ - GG82563_REG(0, 29) /* Alternate Page Select */ -#define GG82563_PHY_TEST_CLK_CTRL \ - GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */ - -#define GG82563_PHY_MAC_SPEC_CTRL \ - GG82563_REG(2, 21) /* MAC Specific Control Register */ -#define GG82563_PHY_MAC_SPEC_CTRL_2 \ - GG82563_REG(2, 26) /* MAC Specific Control 2 */ - -#define GG82563_PHY_DSP_DISTANCE \ - GG82563_REG(5, 26) /* DSP Distance */ - -/* Page 193 - Port Control Registers */ -#define GG82563_PHY_KMRN_MODE_CTRL \ - GG82563_REG(193, 16) /* Kumeran Mode Control */ -#define GG82563_PHY_PORT_RESET \ - GG82563_REG(193, 17) /* Port Reset */ -#define GG82563_PHY_REVISION_ID \ - GG82563_REG(193, 18) /* Revision ID */ -#define GG82563_PHY_DEVICE_ID \ - GG82563_REG(193, 19) /* Device ID */ -#define GG82563_PHY_PWR_MGMT_CTRL \ - GG82563_REG(193, 20) /* Power Management Control */ -#define GG82563_PHY_RATE_ADAPT_CTRL \ - GG82563_REG(193, 25) /* Rate Adaptation Control */ - -/* Page 194 - KMRN Registers */ -#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \ - GG82563_REG(194, 16) /* FIFO's Control/Status */ -#define GG82563_PHY_KMRN_CTRL \ - GG82563_REG(194, 17) /* Control */ -#define GG82563_PHY_INBAND_CTRL \ - GG82563_REG(194, 18) /* Inband Control */ -#define GG82563_PHY_KMRN_DIAGNOSTIC \ - GG82563_REG(194, 19) /* Diagnostic */ -#define GG82563_PHY_ACK_TIMEOUTS \ - GG82563_REG(194, 20) /* Acknowledge Timeouts */ -#define GG82563_PHY_ADV_ABILITY \ - GG82563_REG(194, 21) /* Advertised Ability */ -#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \ - GG82563_REG(194, 23) /* Link Partner Advertised Ability */ -#define GG82563_PHY_ADV_NEXT_PAGE \ - GG82563_REG(194, 24) /* Advertised Next Page */ -#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \ - GG82563_REG(194, 25) /* Link Partner Advertised Next page */ -#define GG82563_PHY_KMRN_MISC \ - GG82563_REG(194, 26) /* Misc. */ - /* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ /* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ /* Autoneg Advertisement Register */ -#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ /* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ -#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ -#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ -#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ -#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ -#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ -#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ -#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ /* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ -#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ -#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ -#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ -#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ /* Next Page TX Register */ -#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ -#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges - * of different NP - */ -#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg - * 0 = cannot comply with msg - */ -#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP - */ +#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ /* Link Partner Next Page Register */ -#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ -#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges - * of different NP - */ -#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg - * 0 = cannot comply with msg - */ -#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ -#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP - */ +#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ +#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ /* 1000BASE-T Control Register */ -#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ - /* 0=DTE device */ -#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ - /* 0=Configure PHY as Slave */ -#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ - /* 0=Automatic Master/Slave config */ -#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ + /* 0=DTE device */ +#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ + /* 0=Configure PHY as Slave */ +#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ + /* 0=Automatic Master/Slave config */ +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ /* 1000BASE-T Status Register */ -#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ -#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ -#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ -#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ #define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 #define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 #define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 @@ -2829,64 +2652,64 @@ struct e1000_host_command_info { #define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 /* Extended Status Register */ -#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ -#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ -#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ -#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ +#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ -#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ -#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ +#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ +#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ -#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ - /* (0=enable, 1=disable) */ +#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ + /* (0=enable, 1=disable) */ /* M88E1000 PHY Specific Control Register */ -#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ -#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ -#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ -#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, - * 0=CLK125 toggling - */ -#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ - /* Manual MDI configuration */ -#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ -#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, - * 100BASE-TX/10BASE-T: - * MDI Mode - */ -#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled - * all speeds. - */ +#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ +#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, + * 0=CLK125 toggling + */ +#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ + /* Manual MDI configuration */ +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, + * 100BASE-TX/10BASE-T: + * MDI Mode + */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled + * all speeds. + */ #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080 - /* 1=Enable Extended 10BASE-T distance - * (Lower 10BASE-T RX Threshold) - * 0=Normal 10BASE-T RX Threshold */ + /* 1=Enable Extended 10BASE-T distance + * (Lower 10BASE-T RX Threshold) + * 0=Normal 10BASE-T RX Threshold */ #define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100 - /* 1=5-Bit interface in 100BASE-TX - * 0=MII interface in 100BASE-TX */ -#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ -#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ -#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ + /* 1=5-Bit interface in 100BASE-TX + * 0=MII interface in 100BASE-TX */ +#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ +#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1 #define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 /* M88E1000 PHY Specific Status Register */ -#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ -#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ -#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ -#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ -#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; - * 3=110-140M;4=>140M */ -#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ -#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ -#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ -#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ -#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ -#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ -#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ -#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ +#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; + * 3=110-140M;4=>140M */ +#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ +#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ +#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ #define M88E1000_PSSR_REV_POLARITY_SHIFT 1 #define M88E1000_PSSR_DOWNSHIFT_SHIFT 5 @@ -2894,12 +2717,12 @@ struct e1000_host_command_info { #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 /* M88E1000 Extended PHY Specific Control Register */ -#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ -#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. - * Will assert lost lock and bring - * link down if idle not seen - * within 1ms in 1000BASE-T - */ +#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ +#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. + * Will assert lost lock and bring + * link down if idle not seen + * within 1ms in 1000BASE-T + */ /* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 @@ -2914,9 +2737,9 @@ struct e1000_host_command_info { #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300 -#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ -#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ -#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ /* M88EC018 Rev 2 specific DownShift settings */ #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 @@ -2938,18 +2761,18 @@ struct e1000_host_command_info { #define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000 /* IGP01E1000 Specific Port Status Register - R/O */ -#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */ +#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */ #define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 #define IGP01E1000_PSSR_CABLE_LENGTH 0x007C #define IGP01E1000_PSSR_FULL_DUPLEX 0x0200 #define IGP01E1000_PSSR_LINK_UP 0x0400 #define IGP01E1000_PSSR_MDIX 0x0800 -#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */ +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */ #define IGP01E1000_PSSR_SPEED_10MBPS 0x4000 #define IGP01E1000_PSSR_SPEED_100MBPS 0x8000 #define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 -#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */ -#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */ +#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */ +#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */ /* IGP01E1000 Specific Port Control Register - R/W */ #define IGP01E1000_PSCR_TP_LOOPBACK 0x0010 @@ -2957,16 +2780,16 @@ struct e1000_host_command_info { #define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400 #define IGP01E1000_PSCR_FLIP_CHIP 0x0800 #define IGP01E1000_PSCR_AUTO_MDIX 0x1000 -#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */ +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */ /* IGP01E1000 Specific Port Link Health Register */ #define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000 #define IGP01E1000_PLHR_MASTER_FAULT 0x2000 #define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000 -#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */ -#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */ -#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */ +#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */ +#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */ +#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */ #define IGP01E1000_PLHR_DATA_ERR_0 0x0100 #define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040 #define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010 @@ -2981,9 +2804,9 @@ struct e1000_host_command_info { #define IGP01E1000_MSE_CHANNEL_B 0x0F00 #define IGP01E1000_MSE_CHANNEL_A 0xF000 -#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ -#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ -#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ /* IGP01E1000 DSP reset macros */ #define DSP_RESET_ENABLE 0x0 @@ -2992,8 +2815,8 @@ struct e1000_host_command_info { /* IGP01E1000 & IGP02E1000 AGC Registers */ -#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ -#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ +#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ /* IGP02E1000 AGC Register Length 9-bit mask */ #define IGP02E1000_AGC_LENGTH_MASK 0x7F @@ -3011,9 +2834,9 @@ struct e1000_host_command_info { #define IGP01E1000_PHY_POLARITY_MASK 0x0078 /* IGP01E1000 GMII FIFO Register */ -#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed - * on Link-Up */ -#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */ +#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed + * on Link-Up */ +#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */ /* IGP01E1000 Analog Register */ #define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1 @@ -3032,114 +2855,6 @@ struct e1000_host_command_info { #define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080 #define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500 -/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ -#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */ -#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */ -#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */ -#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */ -#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 -#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */ -#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */ -#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */ -#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */ -#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300 -#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */ -#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */ -#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */ -#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */ -#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */ -#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000 -#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12 - -/* PHY Specific Status Register (Page 0, Register 17) */ -#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */ -#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */ -#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */ -#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */ -#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */ -#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */ -#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */ -#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */ -#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */ -#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */ -#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */ -#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */ -#define GG82563_PSSR_SPEED_MASK 0xC000 -#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */ -#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */ -#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */ - -/* PHY Specific Status Register 2 (Page 0, Register 19) */ -#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */ -#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */ -#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */ -#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */ -#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */ -#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */ -#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */ -#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */ -#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */ -#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */ -#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */ -#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */ -#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */ - -/* PHY Specific Control Register 2 (Page 0, Register 26) */ -#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */ -#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C -#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */ -#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */ -#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */ -#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */ -#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */ -#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000 -#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */ -#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */ - -/* MAC Specific Control Register (Page 2, Register 21) */ -/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ -#define GG82563_MSCR_TX_CLK_MASK 0x0007 -#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004 -#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005 -#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006 -#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007 - -#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ - -/* DSP Distance Register (Page 5, Register 26) */ -#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M; - 1 = 50-80M; - 2 = 80-110M; - 3 = 110-140M; - 4 = >140M */ - -/* Kumeran Mode Control Register (Page 193, Register 16) */ -#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */ -#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */ -#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080 -#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400 -#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */ -#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 - -/* Power Management Control Register (Page 193, Register 20) */ -#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */ -#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */ -#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */ -#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */ -#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */ -#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */ -#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */ -#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300 -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */ -#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */ - -/* In-Band Control Register (Page 194, Register 18) */ -#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */ - - /* Bit definitions for valid PHY IDs. */ /* I = Integrated * E = External @@ -3154,8 +2869,6 @@ struct e1000_host_command_info { #define M88E1011_I_REV_4 0x04 #define M88E1111_I_PHY_ID 0x01410CC0 #define L1LXT971A_PHY_ID 0x001378E0 -#define GG82563_E_PHY_ID 0x01410CA0 - /* Bits... * 15-5: page @@ -3166,41 +2879,41 @@ struct e1000_host_command_info { (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) #define IGP3_PHY_PORT_CTRL \ - PHY_REG(769, 17) /* Port General Configuration */ + PHY_REG(769, 17) /* Port General Configuration */ #define IGP3_PHY_RATE_ADAPT_CTRL \ - PHY_REG(769, 25) /* Rate Adapter Control Register */ + PHY_REG(769, 25) /* Rate Adapter Control Register */ #define IGP3_KMRN_FIFO_CTRL_STATS \ - PHY_REG(770, 16) /* KMRN FIFO's control/status register */ + PHY_REG(770, 16) /* KMRN FIFO's control/status register */ #define IGP3_KMRN_POWER_MNG_CTRL \ - PHY_REG(770, 17) /* KMRN Power Management Control Register */ + PHY_REG(770, 17) /* KMRN Power Management Control Register */ #define IGP3_KMRN_INBAND_CTRL \ - PHY_REG(770, 18) /* KMRN Inband Control Register */ + PHY_REG(770, 18) /* KMRN Inband Control Register */ #define IGP3_KMRN_DIAG \ - PHY_REG(770, 19) /* KMRN Diagnostic register */ -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ + PHY_REG(770, 19) /* KMRN Diagnostic register */ +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ #define IGP3_KMRN_ACK_TIMEOUT \ - PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ + PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ #define IGP3_VR_CTRL \ - PHY_REG(776, 18) /* Voltage regulator control register */ -#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ -#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ + PHY_REG(776, 18) /* Voltage regulator control register */ +#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ +#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ #define IGP3_CAPABILITY \ - PHY_REG(776, 19) /* IGP3 Capability Register */ + PHY_REG(776, 19) /* IGP3 Capability Register */ /* Capabilities for SKU Control */ -#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ -#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ -#define IGP3_CAP_ASF 0x0004 /* Support ASF */ -#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ -#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ -#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ -#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ -#define IGP3_CAP_RSS 0x0080 /* Support RSS */ -#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ -#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ +#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ +#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ +#define IGP3_CAP_ASF 0x0004 /* Support ASF */ +#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ +#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ +#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ +#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ +#define IGP3_CAP_RSS 0x0080 /* Support RSS */ +#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ +#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ #define IGP3_PPC_JORDAN_EN 0x0001 #define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002 @@ -3210,69 +2923,69 @@ struct e1000_host_command_info { #define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020 #define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040 -#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ -#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ +#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ +#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ #define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18) #define IGP3_KMRN_EC_DIS_INBAND 0x0080 #define IGP03E1000_E_PHY_ID 0x02A80390 -#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ +#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ #define IFE_PLUS_E_PHY_ID 0x02A80320 #define IFE_C_E_PHY_ID 0x02A80310 -#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ -#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ -#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ -#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */ -#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ -#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ -#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ -#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ -#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ -#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ -#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ -#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ -#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ - -#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */ -#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ -#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ -#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ -#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ -#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ -#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ +#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ +#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */ +#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ +#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ +#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ +#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ +#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ +#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ +#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ + +#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */ +#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ +#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ +#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ +#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ +#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ #define IFE_PESC_POLARITY_REVERSED_SHIFT 8 -#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */ -#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ -#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ -#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ +#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */ +#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ +#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ #define IFE_PSC_FORCE_POLARITY_SHIFT 5 #define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4 -#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ -#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ -#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ #define IFE_PMC_MDIX_MODE_SHIFT 6 -#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ - -#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ -#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ -#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ -#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ -#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ -#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ -#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ -#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ -#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ -#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ -#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ - -#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ -#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ +#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ + +#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ +#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ +#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ +#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ +#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ +#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ +#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ +#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ +#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ +#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ #define ICH_FLASH_SEG_SIZE_256 256 #define ICH_FLASH_SEG_SIZE_4K 4096 #define ICH_FLASH_SEG_SIZE_64K 65536 @@ -3305,74 +3018,6 @@ struct e1000_host_command_info { #define ICH_GFPREG_BASE_MASK 0x1FFF #define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ -/* Offset 04h HSFSTS */ -union ich8_hws_flash_status { - struct ich8_hsfsts { -#ifdef __BIG_ENDIAN - u16 reserved2 :6; - u16 fldesvalid :1; - u16 flockdn :1; - u16 flcdone :1; - u16 flcerr :1; - u16 dael :1; - u16 berasesz :2; - u16 flcinprog :1; - u16 reserved1 :2; -#else - u16 flcdone :1; /* bit 0 Flash Cycle Done */ - u16 flcerr :1; /* bit 1 Flash Cycle Error */ - u16 dael :1; /* bit 2 Direct Access error Log */ - u16 berasesz :2; /* bit 4:3 Block/Sector Erase Size */ - u16 flcinprog :1; /* bit 5 flash SPI cycle in Progress */ - u16 reserved1 :2; /* bit 13:6 Reserved */ - u16 reserved2 :6; /* bit 13:6 Reserved */ - u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */ - u16 flockdn :1; /* bit 15 Flash Configuration Lock-Down */ -#endif - } hsf_status; - u16 regval; -}; - -/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */ -/* Offset 06h FLCTL */ -union ich8_hws_flash_ctrl { - struct ich8_hsflctl { -#ifdef __BIG_ENDIAN - u16 fldbcount :2; - u16 flockdn :6; - u16 flcgo :1; - u16 flcycle :2; - u16 reserved :5; -#else - u16 flcgo :1; /* 0 Flash Cycle Go */ - u16 flcycle :2; /* 2:1 Flash Cycle */ - u16 reserved :5; /* 7:3 Reserved */ - u16 fldbcount :2; /* 9:8 Flash Data Byte Count */ - u16 flockdn :6; /* 15:10 Reserved */ -#endif - } hsf_ctrl; - u16 regval; -}; - -/* ICH8 Flash Region Access Permissions */ -union ich8_hws_flash_regacc { - struct ich8_flracc { -#ifdef __BIG_ENDIAN - u32 gmwag :8; - u32 gmrag :8; - u32 grwa :8; - u32 grra :8; -#else - u32 grra :8; /* 0:7 GbE region Read Access */ - u32 grwa :8; /* 8:15 GbE region Write Access */ - u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */ - u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */ -#endif - } hsf_flregacc; - u16 regval; -}; - /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF #define PHY_SOF 0x01 @@ -3384,10 +3029,10 @@ union ich8_hws_flash_regacc { #define MII_CR_SPEED_100 0x2000 #define MII_CR_SPEED_10 0x0000 #define E1000_PHY_ADDRESS 0x01 -#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ -#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ +#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ #define PHY_REVISION_MASK 0xFFFFFFF0 -#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */ +#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */ #define REG4_SPEED_MASK 0x01E0 #define REG9_SPEED_MASK 0x0300 #define ADVERTISE_10_HALF 0x0001 @@ -3396,8 +3041,8 @@ union ich8_hws_flash_regacc { #define ADVERTISE_100_FULL 0x0008 #define ADVERTISE_1000_HALF 0x0010 #define ADVERTISE_1000_FULL 0x0020 -#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ -#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds*/ -#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds*/ +#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ +#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ +#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ #endif /* _E1000_HW_H_ */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c66dd4f9437..bcd192ca47b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.21-k3-NAPI" +#define DRV_VERSION "7.3.21-k5-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -131,7 +131,6 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); -static irqreturn_t e1000_intr_msi(int irq, void *data); static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); static int e1000_clean(struct napi_struct *napi, int budget); @@ -258,25 +257,14 @@ module_exit(e1000_exit_module); static int e1000_request_irq(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; irq_handler_t handler = e1000_intr; int irq_flags = IRQF_SHARED; int err; - if (hw->mac_type >= e1000_82571) { - adapter->have_msi = !pci_enable_msi(adapter->pdev); - if (adapter->have_msi) { - handler = e1000_intr_msi; - irq_flags = 0; - } - } - err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, netdev); if (err) { - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); DPRINTK(PROBE, ERR, "Unable to allocate interrupt Error: %d\n", err); } @@ -289,9 +277,6 @@ static void e1000_free_irq(struct e1000_adapter *adapter) struct net_device *netdev = adapter->netdev; free_irq(adapter->pdev->irq, netdev); - - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); } /** @@ -345,76 +330,6 @@ static void e1000_update_mng_vlan(struct e1000_adapter *adapter) } } -/** - * e1000_release_hw_control - release control of the h/w to f/w - * @adapter: address of board private structure - * - * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that the - * driver is no longer loaded. For AMT version (only with 82573) i - * of the f/w this means that the network i/f is closed. - * - **/ - -static void e1000_release_hw_control(struct e1000_adapter *adapter) -{ - u32 ctrl_ext; - u32 swsm; - struct e1000_hw *hw = &adapter->hw; - - /* Let firmware taken over control of h/w */ - switch (hw->mac_type) { - case e1000_82573: - swsm = er32(SWSM); - ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); - break; - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - case e1000_ich8lan: - ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); - break; - default: - break; - } -} - -/** - * e1000_get_hw_control - get control of the h/w from f/w - * @adapter: address of board private structure - * - * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. For AMT version (only with 82573) - * of the f/w this means that the network i/f is open. - * - **/ - -static void e1000_get_hw_control(struct e1000_adapter *adapter) -{ - u32 ctrl_ext; - u32 swsm; - struct e1000_hw *hw = &adapter->hw; - - /* Let firmware know the driver has taken over */ - switch (hw->mac_type) { - case e1000_82573: - swsm = er32(SWSM); - ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); - break; - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - case e1000_ich8lan: - ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); - break; - default: - break; - } -} - static void e1000_init_manageability(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -425,20 +340,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter) /* disable hardware interception of ARP */ manc &= ~(E1000_MANC_ARP_EN); - /* enable receiving management packets to the host */ - /* this will probably generate destination unreachable messages - * from the host OS, but the packets will be handled on SMBUS */ - if (hw->has_manc2h) { - u32 manc2h = er32(MANC2H); - - manc |= E1000_MANC_EN_MNG2HOST; -#define E1000_MNG2HOST_PORT_623 (1 << 5) -#define E1000_MNG2HOST_PORT_664 (1 << 6) - manc2h |= E1000_MNG2HOST_PORT_623; - manc2h |= E1000_MNG2HOST_PORT_664; - ew32(MANC2H, manc2h); - } - ew32(MANC, manc); } } @@ -453,12 +354,6 @@ static void e1000_release_manageability(struct e1000_adapter *adapter) /* re-enable hardware interception of ARP */ manc |= E1000_MANC_ARP_EN; - if (hw->has_manc2h) - manc &= ~E1000_MANC_EN_MNG2HOST; - - /* don't explicitly have to mess with MANC2H since - * MANC has an enable disable that gates MANC2H */ - ew32(MANC, manc); } } @@ -563,15 +458,6 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) if (er32(MANC) & E1000_MANC_SMBUS_EN) goto out; break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_80003es2lan: - case e1000_ich8lan: - if (e1000_check_mng_mode(hw) || - e1000_check_phy_reset_block(hw)) - goto out; - break; default: goto out; } @@ -599,8 +485,7 @@ void e1000_down(struct e1000_adapter *adapter) ew32(RCTL, rctl & ~E1000_RCTL_EN); /* flush and sleep below */ - /* can be netif_tx_disable when NETIF_F_LLTX is removed */ - netif_stop_queue(netdev); + netif_tx_disable(netdev); /* disable transmits in the hardware */ tctl = er32(TCTL); @@ -671,16 +556,6 @@ void e1000_reset(struct e1000_adapter *adapter) legacy_pba_adjust = true; pba = E1000_PBA_30K; break; - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: - pba = E1000_PBA_38K; - break; - case e1000_82573: - pba = E1000_PBA_20K; - break; - case e1000_ich8lan: - pba = E1000_PBA_8K; case e1000_undefined: case e1000_num_macs: break; @@ -744,16 +619,8 @@ void e1000_reset(struct e1000_adapter *adapter) /* if short on rx space, rx wins and must trump tx * adjustment or use Early Receive if available */ - if (pba < min_rx_space) { - switch (hw->mac_type) { - case e1000_82573: - /* ERT enabled in e1000_configure_rx */ - break; - default: - pba = min_rx_space; - break; - } - } + if (pba < min_rx_space) + pba = min_rx_space; } } @@ -789,7 +656,6 @@ void e1000_reset(struct e1000_adapter *adapter) /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */ if (hw->mac_type >= e1000_82544 && - hw->mac_type <= e1000_82547_rev_2 && hw->autoneg == 1 && hw->autoneg_advertised == ADVERTISE_1000_FULL) { u32 ctrl = er32(CTRL); @@ -806,20 +672,6 @@ void e1000_reset(struct e1000_adapter *adapter) e1000_reset_adaptive(hw); e1000_phy_get_info(hw, &adapter->phy_info); - if (!adapter->smart_power_down && - (hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572)) { - u16 phy_data = 0; - /* speed up time to link by disabling smart power down, ignore - * the return value of this function because there is nothing - * different we would do if it failed */ - e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - &phy_data); - phy_data &= ~IGP02E1000_PM_SPD; - e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - phy_data); - } - e1000_release_manageability(adapter); } @@ -1046,17 +898,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_sw_init; err = -EIO; - /* Flash BAR mapping must happen after e1000_sw_init - * because it depends on mac_type */ - if ((hw->mac_type == e1000_ich8lan) && - (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - hw->flash_address = pci_ioremap_bar(pdev, 1); - if (!hw->flash_address) - goto err_flashmap; - } - - if (e1000_check_phy_reset_block(hw)) - DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); if (hw->mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | @@ -1064,21 +905,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; - if (hw->mac_type == e1000_ich8lan) - netdev->features &= ~NETIF_F_HW_VLAN_FILTER; } if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; - if (hw->mac_type > e1000_82547_rev_2) - netdev->features |= NETIF_F_TSO6; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; netdev->vlan_features |= NETIF_F_TSO; - netdev->vlan_features |= NETIF_F_TSO6; netdev->vlan_features |= NETIF_F_HW_CSUM; netdev->vlan_features |= NETIF_F_SG; @@ -1153,15 +989,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data); eeprom_apme_mask = E1000_EEPROM_82544_APM; break; - case e1000_ich8lan: - e1000_read_eeprom(hw, - EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data); - eeprom_apme_mask = E1000_EEPROM_ICH8_APME; - break; case e1000_82546: case e1000_82546_rev_3: - case e1000_82571: - case e1000_80003es2lan: if (er32(STATUS) & E1000_STATUS_FUNC_1){ e1000_read_eeprom(hw, EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); @@ -1185,17 +1014,12 @@ static int __devinit e1000_probe(struct pci_dev *pdev, break; case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: - case E1000_DEV_ID_82571EB_FIBER: /* Wake events only supported on port A for dual fiber * regardless of eeprom setting */ if (er32(STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - case E1000_DEV_ID_82571EB_QUAD_COPPER: - case E1000_DEV_ID_82571EB_QUAD_FIBER: - case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: - case E1000_DEV_ID_82571PT_QUAD_COPPER: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; @@ -1213,39 +1037,18 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", - ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : - (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")), - ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" : - (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" : + ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""), + ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" : (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" : (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" : (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"), - ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : - (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" : - (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" : - "32-bit")); + ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit")); printk("%pM\n", netdev->dev_addr); - if (hw->bus_type == e1000_bus_type_pci_express) { - DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no " - "longer be supported by this driver in the future.\n", - pdev->vendor, pdev->device); - DPRINTK(PROBE, WARNING, "please use the \"e1000e\" " - "driver instead.\n"); - } - /* reset the hardware with the new settings */ e1000_reset(adapter); - /* If the controller is 82573 and f/w is AMT, do not set - * DRV_LOAD until the interface is up. For all other cases, - * let the f/w know that the h/w is now under the control - * of the driver. */ - if (hw->mac_type != e1000_82573 || - !e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); if (err) @@ -1260,14 +1063,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev, return 0; err_register: - e1000_release_hw_control(adapter); err_eeprom: - if (!e1000_check_phy_reset_block(hw)) - e1000_phy_hw_reset(hw); + e1000_phy_hw_reset(hw); if (hw->flash_address) iounmap(hw->flash_address); -err_flashmap: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: @@ -1298,18 +1098,18 @@ static void __devexit e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + set_bit(__E1000_DOWN, &adapter->flags); + del_timer_sync(&adapter->tx_fifo_stall_timer); + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_info_timer); + cancel_work_sync(&adapter->reset_task); e1000_release_manageability(adapter); - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); - unregister_netdev(netdev); - if (!e1000_check_phy_reset_block(hw)) - e1000_phy_hw_reset(hw); + e1000_phy_hw_reset(hw); kfree(adapter->tx_ring); kfree(adapter->rx_ring); @@ -1472,12 +1272,6 @@ static int e1000_open(struct net_device *netdev) e1000_update_mng_vlan(adapter); } - /* If AMT is enabled, let the firmware know that the network - * interface is now open */ - if (hw->mac_type == e1000_82573 && - e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our @@ -1503,7 +1297,6 @@ static int e1000_open(struct net_device *netdev) return E1000_SUCCESS; err_req_irq: - e1000_release_hw_control(adapter); e1000_power_down_phy(adapter); e1000_free_all_rx_resources(adapter); err_setup_rx: @@ -1548,12 +1341,6 @@ static int e1000_close(struct net_device *netdev) e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); } - /* If AMT is enabled, let the firmware know that the network - * interface is now closed */ - if (hw->mac_type == e1000_82573 && - e1000_check_mng_mode(hw)) - e1000_release_hw_control(adapter); - return 0; } @@ -1692,7 +1479,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) { u64 tdba; struct e1000_hw *hw = &adapter->hw; - u32 tdlen, tctl, tipg, tarc; + u32 tdlen, tctl, tipg; u32 ipgr1, ipgr2; /* Setup the HW Tx Head and Tail descriptor pointers */ @@ -1714,8 +1501,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) } /* Set the default values for the Tx Inter Packet Gap timer */ - if (hw->mac_type <= e1000_82547_rev_2 && - (hw->media_type == e1000_media_type_fiber || + if ((hw->media_type == e1000_media_type_fiber || hw->media_type == e1000_media_type_internal_serdes)) tipg = DEFAULT_82543_TIPG_IPGT_FIBER; else @@ -1728,10 +1514,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ipgr1 = DEFAULT_82542_TIPG_IPGR1; ipgr2 = DEFAULT_82542_TIPG_IPGR2; break; - case e1000_80003es2lan: - ipgr1 = DEFAULT_82543_TIPG_IPGR1; - ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; - break; default: ipgr1 = DEFAULT_82543_TIPG_IPGR1; ipgr2 = DEFAULT_82543_TIPG_IPGR2; @@ -1754,21 +1536,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { - tarc = er32(TARC0); - /* set the speed mode bit, we'll clear it if we're not at - * gigabit link later */ - tarc |= (1 << 21); - ew32(TARC0, tarc); - } else if (hw->mac_type == e1000_80003es2lan) { - tarc = er32(TARC0); - tarc |= 1; - ew32(TARC0, tarc); - tarc = er32(TARC1); - tarc |= 1; - ew32(TARC1, tarc); - } - e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ @@ -1804,7 +1571,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) static int e1000_setup_rx_resources(struct e1000_adapter *adapter, struct e1000_rx_ring *rxdr) { - struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; int size, desc_len; @@ -1817,10 +1583,7 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter, } memset(rxdr->buffer_info, 0, size); - if (hw->mac_type <= e1000_82547_rev_2) - desc_len = sizeof(struct e1000_rx_desc); - else - desc_len = sizeof(union e1000_rx_desc_packet_split); + desc_len = sizeof(struct e1000_rx_desc); /* Round up to nearest 4K */ @@ -1977,7 +1740,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) { u64 rdba; struct e1000_hw *hw = &adapter->hw; - u32 rdlen, rctl, rxcsum, ctrl_ext; + u32 rdlen, rctl, rxcsum; if (adapter->netdev->mtu > ETH_DATA_LEN) { rdlen = adapter->rx_ring[0].count * @@ -2004,17 +1767,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(ITR, 1000000000 / (adapter->itr * 256)); } - if (hw->mac_type >= e1000_82571) { - ctrl_ext = er32(CTRL_EXT); - /* Reset delay timers after every interrupt */ - ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; - /* Auto-Mask interrupts upon ICR access */ - ctrl_ext |= E1000_CTRL_EXT_IAME; - ew32(IAM, 0xffffffff); - ew32(CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(); - } - /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ switch (adapter->num_rx_queues) { @@ -2329,22 +2081,6 @@ static int e1000_set_mac(struct net_device *netdev, void *p) e1000_rar_set(hw, hw->mac_addr, 0); - /* With 82571 controllers, LAA may be overwritten (with the default) - * due to controller reset from the other port. */ - if (hw->mac_type == e1000_82571) { - /* activate the work around */ - hw->laa_is_present = 1; - - /* Hold a copy of the LAA in RAR[14] This is done so that - * between the time RAR[0] gets clobbered and the time it - * gets fixed (in e1000_watchdog), the actual LAA is in one - * of the RARs and no incoming packets directed to this port - * are dropped. Eventaully the LAA will be in RAR[0] and - * RAR[14] */ - e1000_rar_set(hw, hw->mac_addr, - E1000_RAR_ENTRIES - 1); - } - if (hw->mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); @@ -2371,9 +2107,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) u32 rctl; u32 hash_value; int i, rar_entries = E1000_RAR_ENTRIES; - int mta_reg_count = (hw->mac_type == e1000_ich8lan) ? - E1000_NUM_MTA_REGISTERS_ICH8LAN : - E1000_NUM_MTA_REGISTERS; + int mta_reg_count = E1000_NUM_MTA_REGISTERS; u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC); if (!mcarray) { @@ -2381,13 +2115,6 @@ static void e1000_set_rx_mode(struct net_device *netdev) return; } - if (hw->mac_type == e1000_ich8lan) - rar_entries = E1000_RAR_ENTRIES_ICH8LAN; - - /* reserve RAR[14] for LAA over-write work-around */ - if (hw->mac_type == e1000_82571) - rar_entries--; - /* Check for Promiscuous and All Multicast modes */ rctl = er32(RCTL); @@ -2396,15 +2123,13 @@ static void e1000_set_rx_mode(struct net_device *netdev) rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); rctl &= ~E1000_RCTL_VFE; } else { - if (netdev->flags & IFF_ALLMULTI) { + if (netdev->flags & IFF_ALLMULTI) rctl |= E1000_RCTL_MPE; - } else { + else rctl &= ~E1000_RCTL_MPE; - } - if (adapter->hw.mac_type != e1000_ich8lan) - /* Enable VLAN filter if there is a VLAN */ - if (adapter->vlgrp) - rctl |= E1000_RCTL_VFE; + /* Enable VLAN filter if there is a VLAN */ + if (adapter->vlgrp) + rctl |= E1000_RCTL_VFE; } if (netdev->uc.count > rar_entries - 1) { @@ -2427,7 +2152,6 @@ static void e1000_set_rx_mode(struct net_device *netdev) * * RAR 0 is used for the station MAC adddress * if there are not 14 addresses, go ahead and clear the filters - * -- with 82571 controllers only 0-13 entries are filled here */ i = 1; if (use_uc) @@ -2521,12 +2245,46 @@ static void e1000_82547_tx_fifo_stall(unsigned long data) adapter->tx_fifo_head = 0; atomic_set(&adapter->tx_fifo_stall, 0); netif_wake_queue(netdev); - } else { + } else if (!test_bit(__E1000_DOWN, &adapter->flags)) { mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); } } } +static bool e1000_has_link(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + bool link_active = false; + + /* get_link_status is set on LSC (link status) interrupt or + * rx sequence error interrupt. get_link_status will stay + * false until the e1000_check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->media_type) { + case e1000_media_type_copper: + if (hw->get_link_status) { + e1000_check_for_link(hw); + link_active = !hw->get_link_status; + } else { + link_active = true; + } + break; + case e1000_media_type_fiber: + e1000_check_for_link(hw); + link_active = !!(er32(STATUS) & E1000_STATUS_LU); + break; + case e1000_media_type_internal_serdes: + e1000_check_for_link(hw); + link_active = hw->serdes_has_link; + break; + default: + break; + } + + return link_active; +} + /** * e1000_watchdog - Timer Call-back * @data: pointer to adapter cast into an unsigned long @@ -2538,33 +2296,16 @@ static void e1000_watchdog(unsigned long data) struct net_device *netdev = adapter->netdev; struct e1000_tx_ring *txdr = adapter->tx_ring; u32 link, tctl; - s32 ret_val; - - ret_val = e1000_check_for_link(hw); - if ((ret_val == E1000_ERR_PHY) && - (hw->phy_type == e1000_phy_igp_3) && - (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { - /* See e1000_kumeran_lock_loss_workaround() */ - DPRINTK(LINK, INFO, - "Gigabit has been disabled, downgrading speed\n"); - } - if (hw->mac_type == e1000_82573) { - e1000_enable_tx_pkt_filtering(hw); - if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id) - e1000_update_mng_vlan(adapter); - } - - if ((hw->media_type == e1000_media_type_internal_serdes) && - !(er32(TXCW) & E1000_TXCW_ANE)) - link = !hw->serdes_link_down; - else - link = er32(STATUS) & E1000_STATUS_LU; + link = e1000_has_link(adapter); + if ((netif_carrier_ok(netdev)) && link) + goto link_up; if (link) { if (!netif_carrier_ok(netdev)) { u32 ctrl; bool txb2b = true; + /* update snapshot of PHY registers on LSC */ e1000_get_speed_and_duplex(hw, &adapter->link_speed, &adapter->link_duplex); @@ -2589,7 +2330,7 @@ static void e1000_watchdog(unsigned long data) case SPEED_10: txb2b = false; netdev->tx_queue_len = 10; - adapter->tx_timeout_factor = 8; + adapter->tx_timeout_factor = 16; break; case SPEED_100: txb2b = false; @@ -2598,52 +2339,16 @@ static void e1000_watchdog(unsigned long data) break; } - if ((hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572) && - !txb2b) { - u32 tarc0; - tarc0 = er32(TARC0); - tarc0 &= ~(1 << 21); - ew32(TARC0, tarc0); - } - - /* disable TSO for pcie and 10/100 speeds, to avoid - * some hardware issues */ - if (!adapter->tso_force && - hw->bus_type == e1000_bus_type_pci_express){ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - DPRINTK(PROBE,INFO, - "10/100 speed: disabling TSO\n"); - netdev->features &= ~NETIF_F_TSO; - netdev->features &= ~NETIF_F_TSO6; - break; - case SPEED_1000: - netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_TSO6; - break; - default: - /* oops */ - break; - } - } - - /* enable transmits in the hardware, need to do this - * after setting TARC0 */ + /* enable transmits in the hardware */ tctl = er32(TCTL); tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); netif_carrier_on(netdev); - mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); adapter->smartspeed = 0; - } else { - /* make sure the receive unit is started */ - if (hw->rx_needs_kicking) { - u32 rctl = er32(RCTL); - ew32(RCTL, rctl | E1000_RCTL_EN); - } } } else { if (netif_carrier_ok(netdev)) { @@ -2652,21 +2357,16 @@ static void e1000_watchdog(unsigned long data) printk(KERN_INFO "e1000: %s NIC Link is Down\n", netdev->name); netif_carrier_off(netdev); - mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - - /* 80003ES2LAN workaround-- - * For packet buffer work-around on link down event; - * disable receives in the ISR and - * reset device here in the watchdog - */ - if (hw->mac_type == e1000_80003es2lan) - /* reset device */ - schedule_work(&adapter->reset_task); + + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); } e1000_smartspeed(adapter); } +link_up: e1000_update_stats(adapter); hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; @@ -2700,13 +2400,10 @@ static void e1000_watchdog(unsigned long data) /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = true; - /* With 82571 controllers, LAA may be overwritten due to controller - * reset from the other port. Set the appropriate LAA in RAR[0] */ - if (hw->mac_type == e1000_82571 && hw->laa_is_present) - e1000_rar_set(hw, hw->mac_addr, 0); - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ)); + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); } enum latency_range { @@ -2718,6 +2415,11 @@ enum latency_range { /** * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current @@ -2727,10 +2429,6 @@ enum latency_range { * while increasing bulk throughput. * this functionality is controlled by the InterruptThrottleRate module * parameter (see e1000_param.c) - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, int bytes) @@ -3035,8 +2733,9 @@ static int e1000_tx_map(struct e1000_adapter *adapter, size -= 4; buffer_info->length = size; - buffer_info->dma = skb_shinfo(skb)->dma_head + offset; + /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; + buffer_info->dma = skb_shinfo(skb)->dma_head + offset; buffer_info->next_to_watch = i; len -= size; @@ -3071,13 +2770,14 @@ static int e1000_tx_map(struct e1000_adapter *adapter, * Avoid terminating buffers within evenly-aligned * dwords. */ if (unlikely(adapter->pcix_82544 && - !((unsigned long)(frag->page+offset+size-1) & 4) && - size > 4)) + !((unsigned long)(page_to_phys(frag->page) + offset + + size - 1) & 4) && + size > 4)) size -= 4; buffer_info->length = size; - buffer_info->dma = map[f] + offset; buffer_info->time_stamp = jiffies; + buffer_info->dma = map[f] + offset; buffer_info->next_to_watch = i; len -= size; @@ -3186,41 +2886,6 @@ no_fifo_stall_required: return 0; } -#define MINIMUM_DHCP_PACKET_SIZE 282 -static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, - struct sk_buff *skb) -{ - struct e1000_hw *hw = &adapter->hw; - u16 length, offset; - if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) && - ( hw->mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) - return 0; - } - if (skb->len > MINIMUM_DHCP_PACKET_SIZE) { - struct ethhdr *eth = (struct ethhdr *)skb->data; - if ((htons(ETH_P_IP) == eth->h_proto)) { - const struct iphdr *ip = - (struct iphdr *)((u8 *)skb->data+14); - if (IPPROTO_UDP == ip->protocol) { - struct udphdr *udp = - (struct udphdr *)((u8 *)ip + - (ip->ihl << 2)); - if (ntohs(udp->dest) == 67) { - offset = (u8 *)udp + 8 - skb->data; - length = skb->len - offset; - - return e1000_mng_write_dhcp_info(hw, - (u8 *)udp + 8, - length); - } - } - } - } - return 0; -} - static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3279,11 +2944,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } - /* 82571 and newer doesn't need the workaround that limited descriptor - * length to 4kB */ - if (hw->mac_type >= e1000_82571) - max_per_txd = 8192; - mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to * make sure there is enough room in the FIFO before @@ -3296,9 +2956,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, max_per_txd = min(mss << 2, max_per_txd); max_txd_pwr = fls(max_per_txd) - 1; - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); if (skb->data_len && hdr_len == len) { switch (hw->mac_type) { @@ -3313,10 +2970,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4) break; /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_ich8lan: pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { DPRINTK(DRV, ERR, @@ -3361,11 +3014,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (adapter->pcix_82544) count += nr_frags; - - if (hw->tx_pkt_filtering && - (hw->mac_type == e1000_82573)) - e1000_transfer_dhcp_info(adapter, skb); - /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) @@ -3374,7 +3022,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (unlikely(hw->mac_type == e1000_82547)) { if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) { netif_stop_queue(netdev); - mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->tx_fifo_stall_timer, + jiffies + 1); return NETDEV_TX_BUSY; } } @@ -3393,14 +3043,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } if (likely(tso)) { - tx_ring->last_tx_tso = 1; + if (likely(hw->mac_type != e1000_82544)) + tx_ring->last_tx_tso = 1; tx_flags |= E1000_TX_FLAGS_TSO; } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; - /* Old method was to assume IPv4 packet by default if TSO was enabled. - * 82571 hardware supports TSO capabilities for IPv6 as well... - * no longer assume, we must. */ if (likely(skb->protocol == htons(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; @@ -3472,7 +3120,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; - u16 eeprom_data = 0; if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { @@ -3483,44 +3130,23 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) /* Adapter-specific max frame size limits. */ switch (hw->mac_type) { case e1000_undefined ... e1000_82542_rev2_1: - case e1000_ich8lan: if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); return -EINVAL; } break; - case e1000_82573: - /* Jumbo Frames not supported if: - * - this is not an 82573L device - * - ASPM is enabled in any way (0x1A bits 3:2) */ - e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1, - &eeprom_data); - if ((hw->device_id != E1000_DEV_ID_82573L) || - (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) { - if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) { - DPRINTK(PROBE, ERR, - "Jumbo Frames not supported.\n"); - return -EINVAL; - } - break; - } - /* ERT will be enabled later to enable wire speed receives */ - - /* fall through to get support */ - case e1000_82571: - case e1000_82572: - case e1000_80003es2lan: -#define MAX_STD_JUMBO_FRAME_SIZE 9234 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - break; default: /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */ break; } + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + /* e1000_down has a dependency on max_frame_size */ + hw->max_frame_size = max_frame; + if (netif_running(netdev)) + e1000_down(adapter); + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. @@ -3549,11 +3175,16 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))) adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; + printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n", + netdev->name, netdev->mtu, new_mtu); netdev->mtu = new_mtu; - hw->max_frame_size = max_frame; if (netif_running(netdev)) - e1000_reinit_locked(adapter); + e1000_up(adapter); + else + e1000_reset(adapter); + + clear_bit(__E1000_RESETTING, &adapter->flags); return 0; } @@ -3596,14 +3227,12 @@ void e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.mprc += er32(MPRC); adapter->stats.roc += er32(ROC); - if (hw->mac_type != e1000_ich8lan) { - adapter->stats.prc64 += er32(PRC64); - adapter->stats.prc127 += er32(PRC127); - adapter->stats.prc255 += er32(PRC255); - adapter->stats.prc511 += er32(PRC511); - adapter->stats.prc1023 += er32(PRC1023); - adapter->stats.prc1522 += er32(PRC1522); - } + adapter->stats.prc64 += er32(PRC64); + adapter->stats.prc127 += er32(PRC127); + adapter->stats.prc255 += er32(PRC255); + adapter->stats.prc511 += er32(PRC511); + adapter->stats.prc1023 += er32(PRC1023); + adapter->stats.prc1522 += er32(PRC1522); adapter->stats.symerrs += er32(SYMERRS); adapter->stats.mpc += er32(MPC); @@ -3632,14 +3261,12 @@ void e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.toth += er32(TOTH); adapter->stats.tpr += er32(TPR); - if (hw->mac_type != e1000_ich8lan) { - adapter->stats.ptc64 += er32(PTC64); - adapter->stats.ptc127 += er32(PTC127); - adapter->stats.ptc255 += er32(PTC255); - adapter->stats.ptc511 += er32(PTC511); - adapter->stats.ptc1023 += er32(PTC1023); - adapter->stats.ptc1522 += er32(PTC1522); - } + adapter->stats.ptc64 += er32(PTC64); + adapter->stats.ptc127 += er32(PTC127); + adapter->stats.ptc255 += er32(PTC255); + adapter->stats.ptc511 += er32(PTC511); + adapter->stats.ptc1023 += er32(PTC1023); + adapter->stats.ptc1522 += er32(PTC1522); adapter->stats.mptc += er32(MPTC); adapter->stats.bptc += er32(BPTC); @@ -3659,20 +3286,6 @@ void e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctc += er32(TSCTC); adapter->stats.tsctfc += er32(TSCTFC); } - if (hw->mac_type > e1000_82547_rev_2) { - adapter->stats.iac += er32(IAC); - adapter->stats.icrxoc += er32(ICRXOC); - - if (hw->mac_type != e1000_ich8lan) { - adapter->stats.icrxptc += er32(ICRXPTC); - adapter->stats.icrxatc += er32(ICRXATC); - adapter->stats.ictxptc += er32(ICTXPTC); - adapter->stats.ictxatc += er32(ICTXATC); - adapter->stats.ictxqec += er32(ICTXQEC); - adapter->stats.ictxqmtc += er32(ICTXQMTC); - adapter->stats.icrxdmtc += er32(ICRXDMTC); - } - } /* Fill out the OS statistics structure */ adapter->net_stats.multicast = adapter->stats.mprc; @@ -3731,49 +3344,6 @@ void e1000_update_stats(struct e1000_adapter *adapter) } /** - * e1000_intr_msi - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ - -static irqreturn_t e1000_intr_msi(int irq, void *data) -{ - struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 icr = er32(ICR); - - /* in NAPI mode read ICR disables interrupts using IAM */ - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->get_link_status = 1; - /* 80003ES2LAN workaround-- For packet buffer work-around on - * link down event; disable receives here in the ISR and reset - * adapter in watchdog */ - if (netif_carrier_ok(netdev) && - (hw->mac_type == e1000_80003es2lan)) { - /* disable receives */ - u32 rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->flags)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - if (likely(napi_schedule_prep(&adapter->napi))) { - adapter->total_tx_bytes = 0; - adapter->total_tx_packets = 0; - adapter->total_rx_bytes = 0; - adapter->total_rx_packets = 0; - __napi_schedule(&adapter->napi); - } else - e1000_irq_enable(adapter); - - return IRQ_HANDLED; -} - -/** * e1000_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure @@ -3784,43 +3354,22 @@ static irqreturn_t e1000_intr(int irq, void *data) struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 rctl, icr = er32(ICR); + u32 icr = er32(ICR); if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ - /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ - if (unlikely(hw->mac_type >= e1000_82571 && - !(icr & E1000_ICR_INT_ASSERTED))) - return IRQ_NONE; - - /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No - * need for the IMC write */ - if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; - /* 80003ES2LAN workaround-- - * For packet buffer work-around on link down event; - * disable receives here in the ISR and - * reset adapter in watchdog - */ - if (netif_carrier_ok(netdev) && - (hw->mac_type == e1000_80003es2lan)) { - /* disable receives */ - rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->flags)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (unlikely(hw->mac_type < e1000_82571)) { - /* disable interrupts, without the synchronize_irq bit */ - ew32(IMC, ~0); - E1000_WRITE_FLUSH(); - } + /* disable interrupts, without the synchronize_irq bit */ + ew32(IMC, ~0); + E1000_WRITE_FLUSH(); + if (likely(napi_schedule_prep(&adapter->napi))) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -3844,17 +3393,13 @@ static irqreturn_t e1000_intr(int irq, void *data) static int e1000_clean(struct napi_struct *napi, int budget) { struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); - struct net_device *poll_dev = adapter->netdev; - int tx_cleaned = 0, work_done = 0; - - adapter = netdev_priv(poll_dev); + int tx_clean_complete = 0, work_done = 0; - tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]); + tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]); - adapter->clean_rx(adapter, &adapter->rx_ring[0], - &work_done, budget); + adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget); - if (!tx_cleaned) + if (!tx_clean_complete) work_done = budget; /* If budget not fully consumed, exit the polling mode */ @@ -3925,7 +3470,9 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, * sees the new next_to_clean. */ smp_mb(); - if (netif_queue_stopped(netdev)) { + + if (netif_queue_stopped(netdev) && + !(test_bit(__E1000_DOWN, &adapter->flags))) { netif_wake_queue(netdev); ++adapter->restart_queue; } @@ -3935,8 +3482,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = false; - if (tx_ring->buffer_info[i].time_stamp && - time_after(jiffies, tx_ring->buffer_info[i].time_stamp + + if (tx_ring->buffer_info[eop].time_stamp && + time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + (adapter->tx_timeout_factor * HZ)) && !(er32(STATUS) & E1000_STATUS_TXOFF)) { @@ -3958,7 +3505,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, readl(hw->hw_addr + tx_ring->tdt), tx_ring->next_to_use, tx_ring->next_to_clean, - tx_ring->buffer_info[i].time_stamp, + tx_ring->buffer_info[eop].time_stamp, eop, jiffies, eop_desc->upper.fields.status); @@ -3999,25 +3546,13 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, return; } /* TCP/UDP Checksum has not been calculated */ - if (hw->mac_type <= e1000_82547_rev_2) { - if (!(status & E1000_RXD_STAT_TCPCS)) - return; - } else { - if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) - return; - } + if (!(status & E1000_RXD_STAT_TCPCS)) + return; + /* It must be a TCP or UDP packet with a valid checksum */ if (likely(status & E1000_RXD_STAT_TCPCS)) { /* TCP checksum is good */ skb->ip_summed = CHECKSUM_UNNECESSARY; - } else if (hw->mac_type > e1000_82547_rev_2) { - /* IP fragment with UDP payload */ - /* Hardware complements the payload checksum, so we undo it - * and then put the value in host order for further stack use. - */ - __sum16 sum = (__force __sum16)htons(csum); - skb->csum = csum_unfold(~sum); - skb->ip_summed = CHECKSUM_COMPLETE; } adapter->hw_csum_good++; } @@ -4814,20 +4349,6 @@ void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc) pcix_set_mmrbc(adapter->pdev, mmrbc); } -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct e1000_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_read_config_word(adapter->pdev, cap_offset + reg, value); - - return E1000_SUCCESS; -} - void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value) { outl(value, port); @@ -4850,33 +4371,27 @@ static void e1000_vlan_rx_register(struct net_device *netdev, ctrl |= E1000_CTRL_VME; ew32(CTRL, ctrl); - if (adapter->hw.mac_type != e1000_ich8lan) { - /* enable VLAN receive filtering */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_CFIEN; - if (!(netdev->flags & IFF_PROMISC)) - rctl |= E1000_RCTL_VFE; - ew32(RCTL, rctl); - e1000_update_mng_vlan(adapter); - } + /* enable VLAN receive filtering */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_CFIEN; + if (!(netdev->flags & IFF_PROMISC)) + rctl |= E1000_RCTL_VFE; + ew32(RCTL, rctl); + e1000_update_mng_vlan(adapter); } else { /* disable VLAN tag insert/strip */ ctrl = er32(CTRL); ctrl &= ~E1000_CTRL_VME; ew32(CTRL, ctrl); - if (adapter->hw.mac_type != e1000_ich8lan) { - /* disable VLAN receive filtering */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_VFE; - ew32(RCTL, rctl); + /* disable VLAN receive filtering */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_VFE; + ew32(RCTL, rctl); - if (adapter->mng_vlan_id != - (u16)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, - adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } + if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; } } @@ -4913,14 +4428,6 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_enable(adapter); - if ((hw->mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && - (vid == adapter->mng_vlan_id)) { - /* release control to f/w */ - e1000_release_hw_control(adapter); - return; - } - /* remove VID from filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(hw, VFTA, index); @@ -5031,16 +4538,13 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) } if (hw->media_type == e1000_media_type_fiber || - hw->media_type == e1000_media_type_internal_serdes) { + hw->media_type == e1000_media_type_internal_serdes) { /* keep the laser running in D3 */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; ew32(CTRL_EXT, ctrl_ext); } - /* Allow time for pending master requests to run */ - e1000_disable_pciex_master(hw); - ew32(WUC, E1000_WUC_PME_EN); ew32(WUFC, wufc); } else { @@ -5056,16 +4560,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) if (adapter->en_mng_pt) *enable_wake = true; - if (hw->phy_type == e1000_phy_igp_3) - e1000_phy_powerdown_workaround(hw); - if (netif_running(netdev)) e1000_free_irq(adapter); - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); - pci_disable_device(pdev); return 0; @@ -5131,14 +4628,6 @@ static int e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* If the controller is 82573 and f/w is AMT, do not set - * DRV_LOAD until the interface is up. For all other cases, - * let the f/w know that the h/w is now under the control - * of the driver. */ - if (hw->mac_type != e1000_82573 || - !e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - return 0; } #endif @@ -5174,7 +4663,7 @@ static void e1000_netpoll(struct net_device *netdev) /** * e1000_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device - * @state: The current pci conneection state + * @state: The current pci connection state * * This function is called after a PCI bus error affecting * this device has been detected. @@ -5243,7 +4732,6 @@ static void e1000_io_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; e1000_init_manageability(adapter); @@ -5255,15 +4743,6 @@ static void e1000_io_resume(struct pci_dev *pdev) } netif_device_attach(netdev); - - /* If the controller is 82573 and f/w is AMT, do not set - * DRV_LOAD until the interface is up. For all other cases, - * let the f/w know that the h/w is now under the control - * of the driver. */ - if (hw->mac_type != e1000_82573 || - !e1000_check_mng_mode(hw)) - e1000_get_hw_control(adapter); - } /* e1000_main.c */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 213437d1315..38d2741ccae 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -518,22 +518,6 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) adapter->smart_power_down = opt.def; } } - { /* Kumeran Lock Loss Workaround */ - opt = (struct e1000_option) { - .type = enable_option, - .name = "Kumeran Lock Loss Workaround", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; - - if (num_KumeranLockLoss > bd) { - unsigned int kmrn_lock_loss = KumeranLockLoss[bd]; - e1000_validate_option(&kmrn_lock_loss, &opt, adapter); - adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; - } else { - adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def; - } - } switch (adapter->hw.media_type) { case e1000_media_type_fiber: @@ -626,12 +610,6 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) .p = dplx_list }} }; - if (e1000_check_phy_reset_block(&adapter->hw)) { - DPRINTK(PROBE, INFO, - "Link active due to SoL/IDER Session. " - "Speed/Duplex/AutoNeg parameter ignored.\n"); - return; - } if (num_Duplex > bd) { dplx = Duplex[bd]; e1000_validate_option(&dplx, &opt, adapter); diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index cc394d07375..5910df60c93 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -2179,7 +2179,7 @@ static int pppol2tp_session_setsockopt(struct sock *sk, * session or the special tunnel type. */ static int pppol2tp_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct pppol2tp_session *session = sk->sk_user_data; diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index a95caa01414..2716b91ba9f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -99,6 +99,8 @@ static struct iwl_lib_ops iwl1000_lib = { .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, .load_ucode = iwl5000_load_ucode, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index e9a685d8e3a..e70c5b0af36 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -2839,6 +2839,8 @@ static struct iwl_lib_ops iwl3945_lib = { .txq_free_tfd = iwl3945_hw_txq_free_tfd, .txq_init = iwl3945_hw_tx_queue_init, .load_ucode = iwl3945_load_bsm, + .dump_nic_event_log = iwl3945_dump_nic_event_log, + .dump_nic_error_log = iwl3945_dump_nic_error_log, .apm_ops = { .init = iwl3945_apm_init, .reset = iwl3945_apm_reset, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index f2403690991..21679bf3a1a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -209,6 +209,8 @@ extern int __must_check iwl3945_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, struct ieee80211_hdr *hdr,int left); +extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv); +extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv); /* * Currently used by iwl-3945-rs... look at restructuring so that it doesn't diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3259b884154..a22a0501c19 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2298,6 +2298,8 @@ static struct iwl_lib_ops iwl4965_lib = { .alive_notify = iwl4965_alive_notify, .init_alive_start = iwl4965_init_alive_start, .load_ucode = iwl4965_load_bsm, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .apm_ops = { .init = iwl4965_apm_init, .reset = iwl4965_apm_reset, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a6391c7fea5..eb08f441100 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1535,6 +1535,8 @@ struct iwl_lib_ops iwl5000_lib = { .rx_handler_setup = iwl5000_rx_handler_setup, .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .load_ucode = iwl5000_load_ucode, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, @@ -1585,6 +1587,8 @@ static struct iwl_lib_ops iwl5150_lib = { .rx_handler_setup = iwl5000_rx_handler_setup, .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .load_ucode = iwl5000_load_ucode, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 82b9c93dff5..c295b8ee922 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -100,6 +100,8 @@ static struct iwl_lib_ops iwl6000_lib = { .setup_deferred_work = iwl5000_setup_deferred_work, .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, .load_ucode = iwl5000_load_ucode, + .dump_nic_event_log = iwl_dump_nic_event_log, + .dump_nic_error_log = iwl_dump_nic_error_log, .init_alive_start = iwl5000_init_alive_start, .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 00457bff1ed..cdc07c47745 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1526,6 +1526,191 @@ static int iwl_read_ucode(struct iwl_priv *priv) return ret; } +#ifdef CONFIG_IWLWIFI_DEBUG +static const char *desc_lookup_text[] = { + "OK", + "FAIL", + "BAD_PARAM", + "BAD_CHECKSUM", + "NMI_INTERRUPT_WDG", + "SYSASSERT", + "FATAL_ERROR", + "BAD_COMMAND", + "HW_ERROR_TUNE_LOCK", + "HW_ERROR_TEMPERATURE", + "ILLEGAL_CHAN_FREQ", + "VCC_NOT_STABLE", + "FH_ERROR", + "NMI_INTERRUPT_HOST", + "NMI_INTERRUPT_ACTION_PT", + "NMI_INTERRUPT_UNKNOWN", + "UCODE_VERSION_MISMATCH", + "HW_ERROR_ABS_LOCK", + "HW_ERROR_CAL_LOCK_FAIL", + "NMI_INTERRUPT_INST_ACTION_PT", + "NMI_INTERRUPT_DATA_ACTION_PT", + "NMI_TRM_HW_ER", + "NMI_INTERRUPT_TRM", + "NMI_INTERRUPT_BREAK_POINT" + "DEBUG_0", + "DEBUG_1", + "DEBUG_2", + "DEBUG_3", + "UNKNOWN" +}; + +static const char *desc_lookup(int i) +{ + int max = ARRAY_SIZE(desc_lookup_text) - 1; + + if (i < 0 || i > max) + i = max; + + return desc_lookup_text[i]; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ + u32 data2, line; + u32 desc, time, count, base, data1; + u32 blink1, blink2, ilink1, ilink2; + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.error_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); + return; + } + + count = iwl_read_targ_mem(priv, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IWL_ERR(priv, "Start IWL Error Log Dump:\n"); + IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", + priv->status, count); + } + + desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); + blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); + blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); + ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); + ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); + data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); + data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); + line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); + time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); + + IWL_ERR(priv, "Desc Time " + "data1 data2 line\n"); + IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n", + desc_lookup(desc), desc, time, data1, data2, line); + IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n"); + IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, + ilink1, ilink2); + +} + +#define EVENT_START_OFFSET (4 * sizeof(u32)) + +/** + * iwl_print_event_log - Dump error event log to syslog + * + */ +static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode) +{ + u32 i; + u32 base; /* SRAM byte address of event log header */ + u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + + if (num_events == 0) + return; + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (mode == 0) + event_size = 2 * sizeof(u32); + else + event_size = 3 * sizeof(u32); + + ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + + /* "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. */ + for (i = 0; i < num_events; i++) { + ev = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + time = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + if (mode == 0) { + /* data, ev */ + IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev); + } else { + data = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", + time, data, ev); + } + } +} + +void iwl_dump_nic_event_log(struct iwl_priv *priv) +{ + u32 base; /* SRAM byte address of event log header */ + u32 capacity; /* event log capacity in # entries */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + u32 size; /* # entries that we'll print */ + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); + return; + } + + /* event log header */ + capacity = iwl_read_targ_mem(priv, base); + mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); + num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); + next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + + size = num_wraps ? capacity : next_entry; + + /* bail out if nothing in log */ + if (size == 0) { + IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); + return; + } + + IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n", + size, num_wraps); + + /* if uCode has wrapped back to top of log, start at the oldest entry, + * i.e the next one that uCode would fill. */ + if (num_wraps) + iwl_print_event_log(priv, next_entry, + capacity - next_entry, mode); + /* (then/else) start at top of log */ + iwl_print_event_log(priv, 0, next_entry, mode); + +} +#endif + /** * iwl_alive_start - called after REPLY_ALIVE notification received * from protocol/runtime uCode (initialization uCode's diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index fd26c0dc9c5..484d5c1a731 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1309,189 +1309,6 @@ static void iwl_print_rx_config_cmd(struct iwl_priv *priv) IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); } - -static const char *desc_lookup_text[] = { - "OK", - "FAIL", - "BAD_PARAM", - "BAD_CHECKSUM", - "NMI_INTERRUPT_WDG", - "SYSASSERT", - "FATAL_ERROR", - "BAD_COMMAND", - "HW_ERROR_TUNE_LOCK", - "HW_ERROR_TEMPERATURE", - "ILLEGAL_CHAN_FREQ", - "VCC_NOT_STABLE", - "FH_ERROR", - "NMI_INTERRUPT_HOST", - "NMI_INTERRUPT_ACTION_PT", - "NMI_INTERRUPT_UNKNOWN", - "UCODE_VERSION_MISMATCH", - "HW_ERROR_ABS_LOCK", - "HW_ERROR_CAL_LOCK_FAIL", - "NMI_INTERRUPT_INST_ACTION_PT", - "NMI_INTERRUPT_DATA_ACTION_PT", - "NMI_TRM_HW_ER", - "NMI_INTERRUPT_TRM", - "NMI_INTERRUPT_BREAK_POINT" - "DEBUG_0", - "DEBUG_1", - "DEBUG_2", - "DEBUG_3", - "UNKNOWN" -}; - -static const char *desc_lookup(int i) -{ - int max = ARRAY_SIZE(desc_lookup_text) - 1; - - if (i < 0 || i > max) - i = max; - - return desc_lookup_text[i]; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -static void iwl_dump_nic_error_log(struct iwl_priv *priv) -{ - u32 data2, line; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); - return; - } - - count = iwl_read_targ_mem(priv, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IWL_ERR(priv, "Start IWL Error Log Dump:\n"); - IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", - priv->status, count); - } - - desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); - blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); - blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); - ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); - ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); - data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); - data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); - line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); - time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); - - IWL_ERR(priv, "Desc Time " - "data1 data2 line\n"); - IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n", - desc_lookup(desc), desc, time, data1, data2, line); - IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n"); - IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, - ilink1, ilink2); - -} - -#define EVENT_START_OFFSET (4 * sizeof(u32)) - -/** - * iwl_print_event_log - Dump error event log to syslog - * - */ -static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - - if (num_events == 0) - return; - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - time = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - if (mode == 0) { - /* data, ev */ - IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev); - } else { - data = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", - time, data, ev); - } - } -} - -void iwl_dump_nic_event_log(struct iwl_priv *priv) -{ - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); - return; - } - - /* event log header */ - capacity = iwl_read_targ_mem(priv, base); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); - return; - } - - IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n", - size, num_wraps); - - /* if uCode has wrapped back to top of log, start at the oldest entry, - * i.e the next one that uCode would fill. */ - if (num_wraps) - iwl_print_event_log(priv, next_entry, - capacity - next_entry, mode); - /* (then/else) start at top of log */ - iwl_print_event_log(priv, 0, next_entry, mode); - -} #endif /** * iwl_irq_handle_error - called for HW or SW error interrupt from card @@ -1506,8 +1323,8 @@ void iwl_irq_handle_error(struct iwl_priv *priv) #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) { - iwl_dump_nic_error_log(priv); - iwl_dump_nic_event_log(priv); + priv->cfg->ops->lib->dump_nic_error_log(priv); + priv->cfg->ops->lib->dump_nic_event_log(priv); iwl_print_rx_config_cmd(priv); } #endif diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 7ff9ffb2b70..e50103a956b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -166,6 +166,8 @@ struct iwl_lib_ops { int (*is_valid_rtc_data_addr)(u32 addr); /* 1st ucode load */ int (*load_ucode)(struct iwl_priv *priv); + void (*dump_nic_event_log)(struct iwl_priv *priv); + void (*dump_nic_error_log)(struct iwl_priv *priv); /* power management */ struct iwl_apm_ops apm_ops; @@ -540,7 +542,19 @@ int iwl_pci_resume(struct pci_dev *pdev); /***************************************************** * Error Handling Debugging ******************************************************/ +#ifdef CONFIG_IWLWIFI_DEBUG void iwl_dump_nic_event_log(struct iwl_priv *priv); +void iwl_dump_nic_error_log(struct iwl_priv *priv); +#else +static inline void iwl_dump_nic_event_log(struct iwl_priv *priv) +{ +} + +static inline void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ +} +#endif + void iwl_clear_isr_stats(struct iwl_priv *priv); /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index fb844859a44..a198bcf6102 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -410,7 +410,7 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file, pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs); hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos, buf_size - pos, 0); - pos += strlen(buf); + pos += strlen(buf + pos); if (buf_size - pos > 0) buf[pos++] = '\n'; } @@ -436,7 +436,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file, if (sscanf(buf, "%d", &event_log_flag) != 1) return -EFAULT; if (event_log_flag == 1) - iwl_dump_nic_event_log(priv); + priv->cfg->ops->lib->dump_nic_event_log(priv); return count; } @@ -909,7 +909,7 @@ static ssize_t iwl_dbgfs_traffic_log_read(struct file *file, "0x%.4x ", ofs); hex_dump_to_buffer(ptr + ofs, 16, 16, 2, buf + pos, bufsz - pos, 0); - pos += strlen(buf); + pos += strlen(buf + pos); if (bufsz - pos > 0) buf[pos++] = '\n'; } @@ -932,7 +932,7 @@ static ssize_t iwl_dbgfs_traffic_log_read(struct file *file, "0x%.4x ", ofs); hex_dump_to_buffer(ptr + ofs, 16, 16, 2, buf + pos, bufsz - pos, 0); - pos += strlen(buf); + pos += strlen(buf + pos); if (bufsz - pos > 0) buf[pos++] = '\n'; } diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index a7422e52d88..c1890754470 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -197,6 +197,12 @@ void iwl_cmd_queue_free(struct iwl_priv *priv) pci_free_consistent(dev, priv->hw_params.tfd_size * txq->q.n_bd, txq->tfds, txq->q.dma_addr); + /* deallocate arrays */ + kfree(txq->cmd); + kfree(txq->meta); + txq->cmd = NULL; + txq->meta = NULL; + /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4f2d4393728..c390dbd877e 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1481,6 +1481,7 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv) tasklet_kill(&priv->irq_tasklet); } +#ifdef CONFIG_IWLWIFI_DEBUG static const char *desc_lookup(int i) { switch (i) { @@ -1504,7 +1505,7 @@ static const char *desc_lookup(int i) #define ERROR_START_OFFSET (1 * sizeof(u32)) #define ERROR_ELEM_SIZE (7 * sizeof(u32)) -static void iwl3945_dump_nic_error_log(struct iwl_priv *priv) +void iwl3945_dump_nic_error_log(struct iwl_priv *priv) { u32 i; u32 desc, time, count, base, data1; @@ -1598,7 +1599,7 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, } } -static void iwl3945_dump_nic_event_log(struct iwl_priv *priv) +void iwl3945_dump_nic_event_log(struct iwl_priv *priv) { u32 base; /* SRAM byte address of event log header */ u32 capacity; /* event log capacity in # entries */ @@ -1640,6 +1641,16 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv) iwl3945_print_event_log(priv, 0, next_entry, mode); } +#else +void iwl3945_dump_nic_event_log(struct iwl_priv *priv) +{ +} + +void iwl3945_dump_nic_error_log(struct iwl_priv *priv) +{ +} + +#endif static void iwl3945_irq_tasklet(struct iwl_priv *priv) { @@ -3683,21 +3694,6 @@ static ssize_t dump_error_log(struct device *d, static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); -static ssize_t dump_event_log(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - char *p = (char *)buf; - - if (p[0] == '1') - iwl3945_dump_nic_event_log(priv); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log); - /***************************************************************************** * * driver setup and tear down @@ -3742,7 +3738,6 @@ static struct attribute *iwl3945_sysfs_entries[] = { &dev_attr_antenna.attr, &dev_attr_channels.attr, &dev_attr_dump_errors.attr, - &dev_attr_dump_events.attr, &dev_attr_flags.attr, &dev_attr_filter_flags.attr, #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index fbf965b31c1..17f38a781d4 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -192,6 +192,10 @@ config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA +config PCMCIA_BCM63XX + tristate "bcm63xx pcmcia support" + depends on BCM63XX && PCMCIA + config PCMCIA_SA1100 tristate "SA1100 support" depends on ARM && ARCH_SA1100 && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 3247828aa20..a03a38acd77 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o obj-$(CONFIG_M32R_CFC) += m32r_cfc.o obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o +obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o obj-$(CONFIG_OMAP_CF) += omap_cf.o diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 9e1140f085f..e1dccedc596 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -363,7 +363,7 @@ static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg) struct at91_cf_socket *cf = platform_get_drvdata(pdev); struct at91_cf_data *board = cf->board; - pcmcia_socket_dev_suspend(&pdev->dev, mesg); + pcmcia_socket_dev_suspend(&pdev->dev); if (device_may_wakeup(&pdev->dev)) { enable_irq_wake(board->det_pin); if (board->irq_pin) diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index 90013341cd5..02088704ac2 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -515,7 +515,7 @@ static int au1x00_drv_pcmcia_probe(struct platform_device *dev) static int au1x00_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int au1x00_drv_pcmcia_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c new file mode 100644 index 00000000000..bc88a3b19bb --- /dev/null +++ b/drivers/pcmcia/bcm63xx_pcmcia.c @@ -0,0 +1,536 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/timer.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/gpio.h> + +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include "bcm63xx_pcmcia.h" + +#define PFX "bcm63xx_pcmcia: " + +#ifdef CONFIG_CARDBUS +/* if cardbus is used, platform device needs reference to actual pci + * device */ +static struct pci_dev *bcm63xx_cb_dev; +#endif + +/* + * read/write helper for pcmcia regs + */ +static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) +{ + return bcm_readl(skt->base + off); +} + +static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, + u32 val, u32 off) +{ + bcm_writel(val, skt->base + off); +} + +/* + * This callback should (re-)initialise the socket, turn on status + * interrupts and PCMCIA bus, and wait for power to stabilise so that + * the card status signals report correctly. + * + * Hardware cannot do that. + */ +static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) +{ + return 0; +} + +/* + * This callback should remove power on the socket, disable IRQs from + * the card, turn off status interrupts, and disable the PCMCIA bus. + * + * Hardware cannot do that. + */ +static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) +{ + return 0; +} + +/* + * Implements the set_socket() operation for the in-kernel PCMCIA + * service (formerly SS_SetSocket in Card Services). We more or + * less punt all of this work and let the kernel handle the details + * of power configuration, reset, &c. We also record the value of + * `state' in order to regurgitate it to the PCMCIA core later. + */ +static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, + socket_state_t *state) +{ + struct bcm63xx_pcmcia_socket *skt; + unsigned long flags; + u32 val; + + skt = sock->driver_data; + + spin_lock_irqsave(&skt->lock, flags); + + /* note: hardware cannot control socket power, so we will + * always report SS_POWERON */ + + /* apply socket reset */ + val = pcmcia_readl(skt, PCMCIA_C1_REG); + if (state->flags & SS_RESET) + val |= PCMCIA_C1_RESET_MASK; + else + val &= ~PCMCIA_C1_RESET_MASK; + + /* reverse reset logic for cardbus card */ + if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) + val ^= PCMCIA_C1_RESET_MASK; + + pcmcia_writel(skt, val, PCMCIA_C1_REG); + + /* keep requested state for event reporting */ + skt->requested_state = *state; + + spin_unlock_irqrestore(&skt->lock, flags); + + return 0; +} + +/* + * identity cardtype from VS[12] input, CD[12] input while only VS2 is + * floating, and CD[12] input while only VS1 is floating + */ +enum { + IN_VS1 = (1 << 0), + IN_VS2 = (1 << 1), + IN_CD1_VS2H = (1 << 2), + IN_CD2_VS2H = (1 << 3), + IN_CD1_VS1H = (1 << 4), + IN_CD2_VS1H = (1 << 5), +}; + +static const u8 vscd_to_cardtype[] = { + + /* VS1 float, VS2 float */ + [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), + + /* VS1 grounded, VS2 float */ + [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), + + /* VS1 grounded, VS2 grounded */ + [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), + + /* VS1 tied to CD1, VS2 float */ + [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), + + /* VS1 grounded, VS2 tied to CD2 */ + [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), + + /* VS1 tied to CD2, VS2 grounded */ + [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), + + /* VS1 float, VS2 grounded */ + [IN_VS1] = (CARD_PCCARD | CARD_XV), + + /* VS1 float, VS2 tied to CD2 */ + [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), + + /* VS1 float, VS2 tied to CD1 */ + [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), + + /* VS1 tied to CD2, VS2 float */ + [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), + + /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ + [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ +}; + +/* + * poll hardware to check card insertion status + */ +static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) +{ + unsigned int stat; + u32 val; + + stat = 0; + + /* check CD for card presence */ + val = pcmcia_readl(skt, PCMCIA_C1_REG); + + if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) + stat |= SS_DETECT; + + /* if new insertion, detect cardtype */ + if ((stat & SS_DETECT) && !skt->card_detected) { + unsigned int stat = 0; + + /* float VS1, float VS2 */ + val |= PCMCIA_C1_VS1OE_MASK; + val |= PCMCIA_C1_VS2OE_MASK; + pcmcia_writel(skt, val, PCMCIA_C1_REG); + + /* wait for output to stabilize and read VS[12] */ + udelay(10); + val = pcmcia_readl(skt, PCMCIA_C1_REG); + stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; + stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; + + /* drive VS1 low, float VS2 */ + val &= ~PCMCIA_C1_VS1OE_MASK; + val |= PCMCIA_C1_VS2OE_MASK; + pcmcia_writel(skt, val, PCMCIA_C1_REG); + + /* wait for output to stabilize and read CD[12] */ + udelay(10); + val = pcmcia_readl(skt, PCMCIA_C1_REG); + stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; + stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; + + /* float VS1, drive VS2 low */ + val |= PCMCIA_C1_VS1OE_MASK; + val &= ~PCMCIA_C1_VS2OE_MASK; + pcmcia_writel(skt, val, PCMCIA_C1_REG); + + /* wait for output to stabilize and read CD[12] */ + udelay(10); + val = pcmcia_readl(skt, PCMCIA_C1_REG); + stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; + stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; + + /* guess cardtype from all this */ + skt->card_type = vscd_to_cardtype[stat]; + if (!skt->card_type) + dev_err(&skt->socket.dev, "unsupported card type\n"); + + /* drive both VS pin to 0 again */ + val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); + + /* enable correct logic */ + val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); + if (skt->card_type & CARD_PCCARD) + val |= PCMCIA_C1_EN_PCMCIA_MASK; + else + val |= PCMCIA_C1_EN_CARDBUS_MASK; + + pcmcia_writel(skt, val, PCMCIA_C1_REG); + } + skt->card_detected = (stat & SS_DETECT) ? 1 : 0; + + /* report card type/voltage */ + if (skt->card_type & CARD_CARDBUS) + stat |= SS_CARDBUS; + if (skt->card_type & CARD_3V) + stat |= SS_3VCARD; + if (skt->card_type & CARD_XV) + stat |= SS_XVCARD; + stat |= SS_POWERON; + + if (gpio_get_value(skt->pd->ready_gpio)) + stat |= SS_READY; + + return stat; +} + +/* + * core request to get current socket status + */ +static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, + unsigned int *status) +{ + struct bcm63xx_pcmcia_socket *skt; + + skt = sock->driver_data; + + spin_lock_bh(&skt->lock); + *status = __get_socket_status(skt); + spin_unlock_bh(&skt->lock); + + return 0; +} + +/* + * socket polling timer callback + */ +static void bcm63xx_pcmcia_poll(unsigned long data) +{ + struct bcm63xx_pcmcia_socket *skt; + unsigned int stat, events; + + skt = (struct bcm63xx_pcmcia_socket *)data; + + spin_lock_bh(&skt->lock); + + stat = __get_socket_status(skt); + + /* keep only changed bits, and mask with required one from the + * core */ + events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; + skt->old_status = stat; + spin_unlock_bh(&skt->lock); + + if (events) + pcmcia_parse_events(&skt->socket, events); + + mod_timer(&skt->timer, + jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); +} + +static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, + struct pccard_io_map *map) +{ + /* this doesn't seem to be called by pcmcia layer if static + * mapping is used */ + return 0; +} + +static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, + struct pccard_mem_map *map) +{ + struct bcm63xx_pcmcia_socket *skt; + struct resource *res; + + skt = sock->driver_data; + if (map->flags & MAP_ATTRIB) + res = skt->attr_res; + else + res = skt->common_res; + + map->static_start = res->start + map->card_start; + return 0; +} + +static struct pccard_operations bcm63xx_pcmcia_operations = { + .init = bcm63xx_pcmcia_sock_init, + .suspend = bcm63xx_pcmcia_suspend, + .get_status = bcm63xx_pcmcia_get_status, + .set_socket = bcm63xx_pcmcia_set_socket, + .set_io_map = bcm63xx_pcmcia_set_io_map, + .set_mem_map = bcm63xx_pcmcia_set_mem_map, +}; + +/* + * register pcmcia socket to core + */ +static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) +{ + struct bcm63xx_pcmcia_socket *skt; + struct pcmcia_socket *sock; + struct resource *res, *irq_res; + unsigned int regmem_size = 0, iomem_size = 0; + u32 val; + int ret; + + skt = kzalloc(sizeof(*skt), GFP_KERNEL); + if (!skt) + return -ENOMEM; + spin_lock_init(&skt->lock); + sock = &skt->socket; + sock->driver_data = skt; + + /* make sure we have all resources we need */ + skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + skt->pd = pdev->dev.platform_data; + if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) { + ret = -EINVAL; + goto err; + } + + /* remap pcmcia registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regmem_size = resource_size(res); + if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { + ret = -EINVAL; + goto err; + } + skt->reg_res = res; + + skt->base = ioremap(res->start, regmem_size); + if (!skt->base) { + ret = -ENOMEM; + goto err; + } + + /* remap io registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + iomem_size = resource_size(res); + skt->io_base = ioremap(res->start, iomem_size); + if (!skt->io_base) { + ret = -ENOMEM; + goto err; + } + + /* resources are static */ + sock->resource_ops = &pccard_static_ops; + sock->ops = &bcm63xx_pcmcia_operations; + sock->owner = THIS_MODULE; + sock->dev.parent = &pdev->dev; + sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; + sock->io_offset = (unsigned long)skt->io_base; + sock->pci_irq = irq_res->start; + +#ifdef CONFIG_CARDBUS + sock->cb_dev = bcm63xx_cb_dev; + if (bcm63xx_cb_dev) + sock->features |= SS_CAP_CARDBUS; +#endif + + /* assume common & attribute memory have the same size */ + sock->map_size = resource_size(skt->common_res); + + /* initialize polling timer */ + setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt); + + /* initialize pcmcia control register, drive VS[12] to 0, + * leave CB IDSEL to the old value since it is set by the PCI + * layer */ + val = pcmcia_readl(skt, PCMCIA_C1_REG); + val &= PCMCIA_C1_CBIDSEL_MASK; + val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; + pcmcia_writel(skt, val, PCMCIA_C1_REG); + + /* + * Hardware has only one set of timings registers, not one for + * each memory access type, so we configure them for the + * slowest one: attribute memory. + */ + val = PCMCIA_C2_DATA16_MASK; + val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; + val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; + val |= 3 << PCMCIA_C2_SETUP_SHIFT; + val |= 3 << PCMCIA_C2_HOLD_SHIFT; + pcmcia_writel(skt, val, PCMCIA_C2_REG); + + ret = pcmcia_register_socket(sock); + if (ret) + goto err; + + /* start polling socket */ + mod_timer(&skt->timer, + jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); + + platform_set_drvdata(pdev, skt); + return 0; + +err: + if (skt->io_base) + iounmap(skt->io_base); + if (skt->base) + iounmap(skt->base); + if (skt->reg_res) + release_mem_region(skt->reg_res->start, regmem_size); + kfree(skt); + return ret; +} + +static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) +{ + struct bcm63xx_pcmcia_socket *skt; + struct resource *res; + + skt = platform_get_drvdata(pdev); + del_timer_sync(&skt->timer); + iounmap(skt->base); + iounmap(skt->io_base); + res = skt->reg_res; + release_mem_region(res->start, resource_size(res)); + kfree(skt); + return 0; +} + +struct platform_driver bcm63xx_pcmcia_driver = { + .probe = bcm63xx_drv_pcmcia_probe, + .remove = __devexit_p(bcm63xx_drv_pcmcia_remove), + .driver = { + .name = "bcm63xx_pcmcia", + .owner = THIS_MODULE, + }, +}; + +#ifdef CONFIG_CARDBUS +static int __devinit bcm63xx_cb_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + /* keep pci device */ + bcm63xx_cb_dev = dev; + return platform_driver_register(&bcm63xx_pcmcia_driver); +} + +static void __devexit bcm63xx_cb_exit(struct pci_dev *dev) +{ + platform_driver_unregister(&bcm63xx_pcmcia_driver); + bcm63xx_cb_dev = NULL; +} + +static struct pci_device_id bcm63xx_cb_table[] = { + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = BCM6348_CPU_ID, + .subvendor = PCI_VENDOR_ID_BROADCOM, + .subdevice = PCI_ANY_ID, + .class = PCI_CLASS_BRIDGE_CARDBUS << 8, + .class_mask = ~0, + }, + + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = BCM6358_CPU_ID, + .subvendor = PCI_VENDOR_ID_BROADCOM, + .subdevice = PCI_ANY_ID, + .class = PCI_CLASS_BRIDGE_CARDBUS << 8, + .class_mask = ~0, + }, + + { }, +}; + +MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); + +static struct pci_driver bcm63xx_cardbus_driver = { + .name = "bcm63xx_cardbus", + .id_table = bcm63xx_cb_table, + .probe = bcm63xx_cb_probe, + .remove = __devexit_p(bcm63xx_cb_exit), +}; +#endif + +/* + * if cardbus support is enabled, register our platform device after + * our fake cardbus bridge has been registered + */ +static int __init bcm63xx_pcmcia_init(void) +{ +#ifdef CONFIG_CARDBUS + return pci_register_driver(&bcm63xx_cardbus_driver); +#else + return platform_driver_register(&bcm63xx_pcmcia_driver); +#endif +} + +static void __exit bcm63xx_pcmcia_exit(void) +{ +#ifdef CONFIG_CARDBUS + return pci_unregister_driver(&bcm63xx_cardbus_driver); +#else + platform_driver_unregister(&bcm63xx_pcmcia_driver); +#endif +} + +module_init(bcm63xx_pcmcia_init); +module_exit(bcm63xx_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); +MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller"); diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h new file mode 100644 index 00000000000..ed957399d86 --- /dev/null +++ b/drivers/pcmcia/bcm63xx_pcmcia.h @@ -0,0 +1,60 @@ +#ifndef BCM63XX_PCMCIA_H_ +#define BCM63XX_PCMCIA_H_ + +#include <linux/types.h> +#include <linux/timer.h> +#include <pcmcia/ss.h> +#include <bcm63xx_dev_pcmcia.h> + +/* socket polling rate in ms */ +#define BCM63XX_PCMCIA_POLL_RATE 500 + +enum { + CARD_CARDBUS = (1 << 0), + CARD_PCCARD = (1 << 1), + CARD_5V = (1 << 2), + CARD_3V = (1 << 3), + CARD_XV = (1 << 4), + CARD_YV = (1 << 5), +}; + +struct bcm63xx_pcmcia_socket { + struct pcmcia_socket socket; + + /* platform specific data */ + struct bcm63xx_pcmcia_platform_data *pd; + + /* all regs access are protected by this spinlock */ + spinlock_t lock; + + /* pcmcia registers resource */ + struct resource *reg_res; + + /* base remapped address of registers */ + void __iomem *base; + + /* whether a card is detected at the moment */ + int card_detected; + + /* type of detected card (mask of above enum) */ + u8 card_type; + + /* keep last socket status to implement event reporting */ + unsigned int old_status; + + /* backup of requested socket state */ + socket_state_t requested_state; + + /* timer used for socket status polling */ + struct timer_list timer; + + /* attribute/common memory resources */ + struct resource *attr_res; + struct resource *common_res; + struct resource *io_res; + + /* base address of io memory */ + void __iomem *io_base; +}; + +#endif /* BCM63XX_PCMCIA_H_ */ diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c index b59d4115d20..300b368605c 100644 --- a/drivers/pcmcia/bfin_cf_pcmcia.c +++ b/drivers/pcmcia/bfin_cf_pcmcia.c @@ -302,7 +302,7 @@ static int __devexit bfin_cf_remove(struct platform_device *pdev) static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg) { - return pcmcia_socket_dev_suspend(&pdev->dev, mesg); + return pcmcia_socket_dev_suspend(&pdev->dev); } static int bfin_cf_resume(struct platform_device *pdev) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 0660ad18258..934d4bee39a 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -101,7 +101,7 @@ EXPORT_SYMBOL(pcmcia_socket_list_rwsem); static int socket_resume(struct pcmcia_socket *skt); static int socket_suspend(struct pcmcia_socket *skt); -int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state) +int pcmcia_socket_dev_suspend(struct device *dev) { struct pcmcia_socket *socket; diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 46561face12..a04f21c8170 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -42,7 +42,7 @@ MODULE_DEVICE_TABLE(pci, i82092aa_pci_ids); #ifdef CONFIG_PM static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int i82092aa_socket_resume (struct pci_dev *dev) diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 40d4953e4b1..b906abe26ad 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1241,7 +1241,7 @@ static int pcic_init(struct pcmcia_socket *s) static int i82365_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int i82365_drv_pcmcia_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 62b4ecc97c4..d1d89c4491a 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -699,7 +699,7 @@ static struct pccard_operations pcc_operations = { static int cfc_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int cfc_drv_pcmcia_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 12034b41d19..a0655839c8d 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -675,7 +675,7 @@ static struct pccard_operations pcc_operations = { static int pcc_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int pcc_drv_pcmcia_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index d1ad0966392..c69f2c4fe52 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -1296,7 +1296,7 @@ static int m8xx_remove(struct of_device *ofdev) #ifdef CONFIG_PM static int m8xx_suspend(struct platform_device *pdev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&pdev->dev, state); + return pcmcia_socket_dev_suspend(&pdev->dev); } static int m8xx_resume(struct platform_device *pdev) diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index f3736398900..68570bc3ac8 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -334,7 +334,7 @@ static int __exit omap_cf_remove(struct platform_device *pdev) static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg) { - return pcmcia_socket_dev_suspend(&pdev->dev, mesg); + return pcmcia_socket_dev_suspend(&pdev->dev); } static int omap_cf_resume(struct platform_device *pdev) diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 8bed1dab903..1c39d3438f2 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -758,7 +758,7 @@ static void __devexit pd6729_pci_remove(struct pci_dev *dev) #ifdef CONFIG_PM static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int pd6729_socket_resume(struct pci_dev *dev) diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 87e22ef8eb0..0e35acb1366 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -302,7 +302,7 @@ static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev) static int pxa2xx_drv_pcmcia_suspend(struct device *dev) { - return pcmcia_socket_dev_suspend(dev, PMSG_SUSPEND); + return pcmcia_socket_dev_suspend(dev); } static int pxa2xx_drv_pcmcia_resume(struct device *dev) diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index d8da5ac844e..2d0e9975153 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -89,7 +89,7 @@ static int sa11x0_drv_pcmcia_remove(struct platform_device *dev) static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int sa11x0_drv_pcmcia_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 401052a21ce..4be4e172ffa 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -159,7 +159,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev) static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int pcmcia_resume(struct sa1111_dev *dev) diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 8eb04230fec..582413fcb62 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -366,7 +366,7 @@ static int __init get_tcic_id(void) static int tcic_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int tcic_drv_pcmcia_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index d4ad50d737b..c9fcbdc164e 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -707,7 +707,7 @@ __setup("vrc4171_card=", vrc4171_card_setup); static int vrc4171_card_suspend(struct platform_device *dev, pm_message_t state) { - return pcmcia_socket_dev_suspend(&dev->dev, state); + return pcmcia_socket_dev_suspend(&dev->dev); } static int vrc4171_card_resume(struct platform_device *dev) diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index b459e87a30a..abe0e44c6e9 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1225,60 +1225,71 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i } #ifdef CONFIG_PM -static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state) +static int yenta_dev_suspend_noirq(struct device *dev) { - struct yenta_socket *socket = pci_get_drvdata(dev); + struct pci_dev *pdev = to_pci_dev(dev); + struct yenta_socket *socket = pci_get_drvdata(pdev); int ret; - ret = pcmcia_socket_dev_suspend(&dev->dev, state); + ret = pcmcia_socket_dev_suspend(dev); - if (socket) { - if (socket->type && socket->type->save_state) - socket->type->save_state(socket); + if (!socket) + return ret; - /* FIXME: pci_save_state needs to have a better interface */ - pci_save_state(dev); - pci_read_config_dword(dev, 16*4, &socket->saved_state[0]); - pci_read_config_dword(dev, 17*4, &socket->saved_state[1]); - pci_disable_device(dev); + if (socket->type && socket->type->save_state) + socket->type->save_state(socket); - /* - * Some laptops (IBM T22) do not like us putting the Cardbus - * bridge into D3. At a guess, some other laptop will - * probably require this, so leave it commented out for now. - */ - /* pci_set_power_state(dev, 3); */ - } + pci_save_state(pdev); + pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]); + pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]); + pci_disable_device(pdev); + + /* + * Some laptops (IBM T22) do not like us putting the Cardbus + * bridge into D3. At a guess, some other laptop will + * probably require this, so leave it commented out for now. + */ + /* pci_set_power_state(dev, 3); */ return ret; } - -static int yenta_dev_resume (struct pci_dev *dev) +static int yenta_dev_resume_noirq(struct device *dev) { - struct yenta_socket *socket = pci_get_drvdata(dev); + struct pci_dev *pdev = to_pci_dev(dev); + struct yenta_socket *socket = pci_get_drvdata(pdev); + int ret; - if (socket) { - int rc; + if (!socket) + return 0; - pci_set_power_state(dev, 0); - /* FIXME: pci_restore_state needs to have a better interface */ - pci_restore_state(dev); - pci_write_config_dword(dev, 16*4, socket->saved_state[0]); - pci_write_config_dword(dev, 17*4, socket->saved_state[1]); + pci_write_config_dword(pdev, 16*4, socket->saved_state[0]); + pci_write_config_dword(pdev, 17*4, socket->saved_state[1]); - rc = pci_enable_device(dev); - if (rc) - return rc; + ret = pci_enable_device(pdev); + if (ret) + return ret; - pci_set_master(dev); + pci_set_master(pdev); - if (socket->type && socket->type->restore_state) - socket->type->restore_state(socket); - } + if (socket->type && socket->type->restore_state) + socket->type->restore_state(socket); - return pcmcia_socket_dev_resume(&dev->dev); + return pcmcia_socket_dev_resume(dev); } + +static struct dev_pm_ops yenta_pm_ops = { + .suspend_noirq = yenta_dev_suspend_noirq, + .resume_noirq = yenta_dev_resume_noirq, + .freeze_noirq = yenta_dev_suspend_noirq, + .thaw_noirq = yenta_dev_resume_noirq, + .poweroff_noirq = yenta_dev_suspend_noirq, + .restore_noirq = yenta_dev_resume_noirq, +}; + +#define YENTA_PM_OPS (¥ta_pm_ops) +#else +#define YENTA_PM_OPS NULL #endif #define CB_ID(vend,dev,type) \ @@ -1376,10 +1387,7 @@ static struct pci_driver yenta_cardbus_driver = { .id_table = yenta_table, .probe = yenta_probe, .remove = __devexit_p(yenta_close), -#ifdef CONFIG_PM - .suspend = yenta_dev_suspend, - .resume = yenta_dev_resume, -#endif + .driver.pm = YENTA_PM_OPS, }; diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index f9f68e0e734..afdbdaaf80c 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1041,6 +1041,9 @@ static int sony_nc_resume(struct acpi_device *device) sony_backlight_update_status(sony_backlight_device) < 0) printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n"); + /* re-read rfkill state */ + sony_nc_rfkill_update(); + return 0; } @@ -1078,6 +1081,8 @@ static int sony_nc_setup_rfkill(struct acpi_device *device, struct rfkill *rfk; enum rfkill_type type; const char *name; + int result; + bool hwblock; switch (nc_type) { case SONY_WIFI: @@ -1105,6 +1110,10 @@ static int sony_nc_setup_rfkill(struct acpi_device *device, if (!rfk) return -ENOMEM; + sony_call_snc_handle(0x124, 0x200, &result); + hwblock = !(result & 0x1); + rfkill_set_hw_state(rfk, hwblock); + err = rfkill_register(rfk); if (err) { rfkill_destroy(rfk); diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index 1b78f639ead..76769978285 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -125,7 +125,7 @@ static int qstat_seq_open(struct inode *inode, struct file *filp) filp->f_path.dentry->d_inode->i_private); } -static struct file_operations debugfs_fops = { +static const struct file_operations debugfs_fops = { .owner = THIS_MODULE, .open = qstat_seq_open, .read = seq_read, diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index eff943923c6..968e3c7c263 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -84,7 +84,7 @@ static int qdio_perf_seq_open(struct inode *inode, struct file *filp) return single_open(filp, qdio_perf_proc_show, NULL); } -static struct file_operations qdio_perf_proc_fops = { +static const struct file_operations qdio_perf_proc_fops = { .owner = THIS_MODULE, .open = qdio_perf_seq_open, .read = seq_read, diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 0cb049f5cc5..747a5e5c127 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1317,7 +1317,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate) } } -static struct file_operations sg_fops = { +static const struct file_operations sg_fops = { .owner = THIS_MODULE, .read = sg_read, .write = sg_write, @@ -2194,9 +2194,11 @@ static int sg_proc_seq_show_int(struct seq_file *s, void *v); static int sg_proc_single_open_adio(struct inode *inode, struct file *file); static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer, size_t count, loff_t *off); -static struct file_operations adio_fops = { - /* .owner, .read and .llseek added in sg_proc_init() */ +static const struct file_operations adio_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_adio, + .read = seq_read, + .llseek = seq_lseek, .write = sg_proc_write_adio, .release = single_release, }; @@ -2204,23 +2206,32 @@ static struct file_operations adio_fops = { static int sg_proc_single_open_dressz(struct inode *inode, struct file *file); static ssize_t sg_proc_write_dressz(struct file *filp, const char __user *buffer, size_t count, loff_t *off); -static struct file_operations dressz_fops = { +static const struct file_operations dressz_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_dressz, + .read = seq_read, + .llseek = seq_lseek, .write = sg_proc_write_dressz, .release = single_release, }; static int sg_proc_seq_show_version(struct seq_file *s, void *v); static int sg_proc_single_open_version(struct inode *inode, struct file *file); -static struct file_operations version_fops = { +static const struct file_operations version_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_version, + .read = seq_read, + .llseek = seq_lseek, .release = single_release, }; static int sg_proc_seq_show_devhdr(struct seq_file *s, void *v); static int sg_proc_single_open_devhdr(struct inode *inode, struct file *file); -static struct file_operations devhdr_fops = { +static const struct file_operations devhdr_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_devhdr, + .read = seq_read, + .llseek = seq_lseek, .release = single_release, }; @@ -2229,8 +2240,11 @@ static int sg_proc_open_dev(struct inode *inode, struct file *file); static void * dev_seq_start(struct seq_file *s, loff_t *pos); static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos); static void dev_seq_stop(struct seq_file *s, void *v); -static struct file_operations dev_fops = { +static const struct file_operations dev_fops = { + .owner = THIS_MODULE, .open = sg_proc_open_dev, + .read = seq_read, + .llseek = seq_lseek, .release = seq_release, }; static const struct seq_operations dev_seq_ops = { @@ -2242,8 +2256,11 @@ static const struct seq_operations dev_seq_ops = { static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v); static int sg_proc_open_devstrs(struct inode *inode, struct file *file); -static struct file_operations devstrs_fops = { +static const struct file_operations devstrs_fops = { + .owner = THIS_MODULE, .open = sg_proc_open_devstrs, + .read = seq_read, + .llseek = seq_lseek, .release = seq_release, }; static const struct seq_operations devstrs_seq_ops = { @@ -2255,8 +2272,11 @@ static const struct seq_operations devstrs_seq_ops = { static int sg_proc_seq_show_debug(struct seq_file *s, void *v); static int sg_proc_open_debug(struct inode *inode, struct file *file); -static struct file_operations debug_fops = { +static const struct file_operations debug_fops = { + .owner = THIS_MODULE, .open = sg_proc_open_debug, + .read = seq_read, + .llseek = seq_lseek, .release = seq_release, }; static const struct seq_operations debug_seq_ops = { @@ -2269,7 +2289,7 @@ static const struct seq_operations debug_seq_ops = { struct sg_proc_leaf { const char * name; - struct file_operations * fops; + const struct file_operations * fops; }; static struct sg_proc_leaf sg_proc_leaf_arr[] = { @@ -2295,9 +2315,6 @@ sg_proc_init(void) for (k = 0; k < num_leaves; ++k) { leaf = &sg_proc_leaf_arr[k]; mask = leaf->fops->write ? S_IRUGO | S_IWUSR : S_IRUGO; - leaf->fops->owner = THIS_MODULE; - leaf->fops->read = seq_read; - leaf->fops->llseek = seq_lseek; proc_create(leaf->name, mask, sg_proc_sgp, leaf->fops); } return 0; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 2209620d234..b1ae774016f 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -64,6 +64,8 @@ static int serial_index(struct uart_port *port) return (serial8250_reg.minor - 64) + port->line; } +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + /* * Debugging. */ @@ -2108,7 +2110,7 @@ static int serial8250_startup(struct uart_port *port) is variable. So, let's just don't test if we receive TX irq. This way, we'll never enable UART_BUG_TXEN. */ - if (up->port.flags & UPF_NO_TXEN_TEST) + if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) goto dont_test_tx_en; /* @@ -3248,6 +3250,9 @@ MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" module_param(nr_uarts, uint, 0644); MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + #ifdef CONFIG_SERIAL_8250_RSA module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 03422ce878c..e5225725727 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -862,7 +862,7 @@ config SERIAL_IMX_CONSOLE config SERIAL_UARTLITE tristate "Xilinx uartlite serial port support" - depends on PPC32 || MICROBLAZE + depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE select SERIAL_CORE help Say Y here if you want to use the Xilinx uartlite serial controller. @@ -1458,4 +1458,23 @@ config SERIAL_TIMBERDALE ---help--- Add support for UART controller on timberdale. +config SERIAL_BCM63XX + tristate "bcm63xx serial port support" + select SERIAL_CORE + depends on BCM63XX + help + If you have a bcm63xx CPU, you can enable its onboard + serial port by enabling this options. + + To compile this driver as a module, choose M here: the + module will be called bcm963xx_uart. + +config SERIAL_BCM63XX_CONSOLE + bool "Console on bcm63xx serial port" + depends on SERIAL_BCM63XX=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the bcm63xx CPU + you can make it the console by answering Y to this option. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 97f6fcc8b43..d21d5dd5d04 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o obj-$(CONFIG_SERIAL_PXA) += pxa.o obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o +obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c new file mode 100644 index 00000000000..beddaa6e906 --- /dev/null +++ b/drivers/serial/bcm63xx_uart.c @@ -0,0 +1,890 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from many drivers using generic_serial interface. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * + * Serial driver for BCM63xx integrated UART. + * + * Hardware flow control was _not_ tested since I only have RX/TX on + * my board. + */ + +#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/console.h> +#include <linux/clk.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/sysrq.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#include <bcm63xx_clk.h> +#include <bcm63xx_irq.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> + +#define BCM63XX_NR_UARTS 1 + +static struct uart_port ports[BCM63XX_NR_UARTS]; + +/* + * rx interrupt mask / stat + * + * mask: + * - rx fifo full + * - rx fifo above threshold + * - rx fifo not empty for too long + */ +#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ + UART_IR_MASK(UART_IR_RXTHRESH) | \ + UART_IR_MASK(UART_IR_RXTIMEOUT)) + +#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ + UART_IR_STAT(UART_IR_RXTHRESH) | \ + UART_IR_STAT(UART_IR_RXTIMEOUT)) + +/* + * tx interrupt mask / stat + * + * mask: + * - tx fifo empty + * - tx fifo below threshold + */ +#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ + UART_IR_MASK(UART_IR_TXTRESH)) + +#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ + UART_IR_STAT(UART_IR_TXTRESH)) + +/* + * external input interrupt + * + * mask: any edge on CTS, DCD + */ +#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ + UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) + +/* + * handy uart register accessor + */ +static inline unsigned int bcm_uart_readl(struct uart_port *port, + unsigned int offset) +{ + return bcm_readl(port->membase + offset); +} + +static inline void bcm_uart_writel(struct uart_port *port, + unsigned int value, unsigned int offset) +{ + bcm_writel(value, port->membase + offset); +} + +/* + * serial core request to check if uart tx fifo is empty + */ +static unsigned int bcm_uart_tx_empty(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; +} + +/* + * serial core request to set RTS and DTR pin state and loopback mode + */ +static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); + /* invert of written value is reflected on the pin */ + if (!(mctrl & TIOCM_DTR)) + val |= UART_MCTL_DTR_MASK; + if (!(mctrl & TIOCM_RTS)) + val |= UART_MCTL_RTS_MASK; + bcm_uart_writel(port, val, UART_MCTL_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (mctrl & TIOCM_LOOP) + val |= UART_CTL_LOOPBACK_MASK; + else + val &= ~UART_CTL_LOOPBACK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to return RI, CTS, DCD and DSR pin state + */ +static unsigned int bcm_uart_get_mctrl(struct uart_port *port) +{ + unsigned int val, mctrl; + + mctrl = 0; + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_RI_MASK) + mctrl |= TIOCM_RI; + if (val & UART_EXTINP_CTS_MASK) + mctrl |= TIOCM_CTS; + if (val & UART_EXTINP_DCD_MASK) + mctrl |= TIOCM_CD; + if (val & UART_EXTINP_DSR_MASK) + mctrl |= TIOCM_DSR; + return mctrl; +} + +/* + * serial core request to disable tx ASAP (used for flow control) + */ +static void bcm_uart_stop_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_TXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to (re)enable tx + */ +static void bcm_uart_start_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_TXEN_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to stop rx, called before port shutdown + */ +static void bcm_uart_stop_rx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_RX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to enable modem status interrupt reporting + */ +static void bcm_uart_enable_ms(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_IR_MASK(UART_IR_EXTIP); + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to start/stop emitting break char + */ +static void bcm_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&port->lock, flags); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (ctl) + val |= UART_CTL_XMITBRK_MASK; + else + val &= ~UART_CTL_XMITBRK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * return port type in string format + */ +static const char *bcm_uart_type(struct uart_port *port) +{ + return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; +} + +/* + * read all chars in rx fifo and send them to core + */ +static void bcm_uart_do_rx(struct uart_port *port) +{ + struct tty_struct *tty; + unsigned int max_count; + + /* limit number of char read in interrupt, should not be + * higher than fifo size anyway since we're much faster than + * serial port */ + max_count = 32; + tty = port->info->port.tty; + do { + unsigned int iestat, c, cstat; + char flag; + + /* get overrun/fifo empty information from ier + * register */ + iestat = bcm_uart_readl(port, UART_IR_REG); + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) + break; + + cstat = c = bcm_uart_readl(port, UART_FIFO_REG); + port->icount.rx++; + flag = TTY_NORMAL; + c &= 0xff; + + if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { + /* do stats first */ + if (cstat & UART_FIFO_BRKDET_MASK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + + if (cstat & UART_FIFO_PARERR_MASK) + port->icount.parity++; + if (cstat & UART_FIFO_FRAMEERR_MASK) + port->icount.frame++; + + /* update flag wrt read_status_mask */ + cstat &= port->read_status_mask; + if (cstat & UART_FIFO_BRKDET_MASK) + flag = TTY_BREAK; + if (cstat & UART_FIFO_FRAMEERR_MASK) + flag = TTY_FRAME; + if (cstat & UART_FIFO_PARERR_MASK) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + if ((cstat & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, c, flag); + + } while (--max_count); + + tty_flip_buffer_push(tty); +} + +/* + * fill tx fifo with chars to send, stop when fifo is about to be full + * or when all chars have been sent. + */ +static void bcm_uart_do_tx(struct uart_port *port) +{ + struct circ_buf *xmit; + unsigned int val, max_count; + + if (port->x_char) { + bcm_uart_writel(port, port->x_char, UART_FIFO_REG); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port)) { + bcm_uart_stop_tx(port); + return; + } + + xmit = &port->info->xmit; + if (uart_circ_empty(xmit)) + goto txq_empty; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; + max_count = port->fifosize - val; + + while (max_count--) { + unsigned int c; + + c = xmit->buf[xmit->tail]; + bcm_uart_writel(port, c, UART_FIFO_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + goto txq_empty; + return; + +txq_empty: + /* nothing to send, disable transmit interrupt */ + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + return; +} + +/* + * process uart interrupt + */ +static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + unsigned int irqstat; + + port = dev_id; + spin_lock(&port->lock); + + irqstat = bcm_uart_readl(port, UART_IR_REG); + if (irqstat & UART_RX_INT_STAT) + bcm_uart_do_rx(port); + + if (irqstat & UART_TX_INT_STAT) + bcm_uart_do_tx(port); + + if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { + unsigned int estat; + + estat = bcm_uart_readl(port, UART_EXTINP_REG); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) + uart_handle_cts_change(port, + estat & UART_EXTINP_CTS_MASK); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) + uart_handle_dcd_change(port, + estat & UART_EXTINP_DCD_MASK); + } + + spin_unlock(&port->lock); + return IRQ_HANDLED; +} + +/* + * enable rx & tx operation on uart + */ +static void bcm_uart_enable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * disable rx & tx operation on uart + */ +static void bcm_uart_disable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | + UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * clear all unread data in rx fifo and unsent data in tx fifo + */ +static void bcm_uart_flush(struct uart_port *port) +{ + unsigned int val; + + /* empty rx and tx fifo */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* read any pending char to make sure all irq status are + * cleared */ + (void)bcm_uart_readl(port, UART_FIFO_REG); +} + +/* + * serial core request to initialize uart and start rx operation + */ +static int bcm_uart_startup(struct uart_port *port) +{ + unsigned int val; + int ret; + + /* mask all irq and flush port */ + bcm_uart_disable(port); + bcm_uart_writel(port, 0, UART_IR_REG); + bcm_uart_flush(port); + + /* clear any pending external input interrupt */ + (void)bcm_uart_readl(port, UART_EXTINP_REG); + + /* set rx/tx fifo thresh to fifo half size */ + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); + val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; + val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; + bcm_uart_writel(port, val, UART_MCTL_REG); + + /* set rx fifo timeout to 1 char time */ + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~UART_CTL_RXTMOUTCNT_MASK; + val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* report any edge on dcd and cts */ + val = UART_EXTINP_INT_MASK; + val |= UART_EXTINP_DCD_NOSENSE_MASK; + val |= UART_EXTINP_CTS_NOSENSE_MASK; + bcm_uart_writel(port, val, UART_EXTINP_REG); + + /* register irq and enable rx interrupts */ + ret = request_irq(port->irq, bcm_uart_interrupt, 0, + bcm_uart_type(port), port); + if (ret) + return ret; + bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); + bcm_uart_enable(port); + return 0; +} + +/* + * serial core request to flush & disable uart + */ +static void bcm_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + bcm_uart_writel(port, 0, UART_IR_REG); + spin_unlock_irqrestore(&port->lock, flags); + + bcm_uart_disable(port); + bcm_uart_flush(port); + free_irq(port->irq, port); +} + +/* + * serial core request to change current uart setting + */ +static void bcm_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int ctl, baud, quot, ier; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable uart while changing speed */ + bcm_uart_disable(port); + bcm_uart_flush(port); + + /* update Control register */ + ctl = bcm_uart_readl(port, UART_CTL_REG); + ctl &= ~UART_CTL_BITSPERSYM_MASK; + + switch (new->c_cflag & CSIZE) { + case CS5: + ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS6: + ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS7: + ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); + break; + default: + ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); + break; + } + + ctl &= ~UART_CTL_STOPBITS_MASK; + if (new->c_cflag & CSTOPB) + ctl |= UART_CTL_STOPBITS_2; + else + ctl |= UART_CTL_STOPBITS_1; + + ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + if (new->c_cflag & PARENB) + ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + if (new->c_cflag & PARODD) + ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + bcm_uart_writel(port, ctl, UART_CTL_REG); + + /* update Baudword register */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud) - 1; + bcm_uart_writel(port, quot, UART_BAUD_REG); + + /* update Interrupt register */ + ier = bcm_uart_readl(port, UART_IR_REG); + + ier &= ~UART_IR_MASK(UART_IR_EXTIP); + if (UART_ENABLE_MS(port, new->c_cflag)) + ier |= UART_IR_MASK(UART_IR_EXTIP); + + bcm_uart_writel(port, ier, UART_IR_REG); + + /* update read/ignore mask */ + port->read_status_mask = UART_FIFO_VALID_MASK; + if (new->c_iflag & INPCK) { + port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; + port->read_status_mask |= UART_FIFO_PARERR_MASK; + } + if (new->c_iflag & (BRKINT)) + port->read_status_mask |= UART_FIFO_BRKDET_MASK; + + port->ignore_status_mask = 0; + if (new->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_FIFO_PARERR_MASK; + if (new->c_iflag & IGNBRK) + port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; + if (!(new->c_cflag & CREAD)) + port->ignore_status_mask |= UART_FIFO_VALID_MASK; + + uart_update_timeout(port, new->c_cflag, baud); + bcm_uart_enable(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * serial core request to claim uart iomem + */ +static int bcm_uart_request_port(struct uart_port *port) +{ + unsigned int size; + + size = RSET_UART_SIZE; + if (!request_mem_region(port->mapbase, size, "bcm63xx")) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, size); + return -EBUSY; + } + return 0; +} + +/* + * serial core request to release uart iomem + */ +static void bcm_uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, RSET_UART_SIZE); + iounmap(port->membase); +} + +/* + * serial core request to do any port required autoconfiguration + */ +static void bcm_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + if (bcm_uart_request_port(port)) + return; + port->type = PORT_BCM63XX; + } +} + +/* + * serial core request to check that port information in serinfo are + * suitable + */ +static int bcm_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + if (port->type != PORT_BCM63XX) + return -EINVAL; + if (port->irq != serinfo->irq) + return -EINVAL; + if (port->iotype != serinfo->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serinfo->iomem_base) + return -EINVAL; + return 0; +} + +/* serial core callbacks */ +static struct uart_ops bcm_uart_ops = { + .tx_empty = bcm_uart_tx_empty, + .get_mctrl = bcm_uart_get_mctrl, + .set_mctrl = bcm_uart_set_mctrl, + .start_tx = bcm_uart_start_tx, + .stop_tx = bcm_uart_stop_tx, + .stop_rx = bcm_uart_stop_rx, + .enable_ms = bcm_uart_enable_ms, + .break_ctl = bcm_uart_break_ctl, + .startup = bcm_uart_startup, + .shutdown = bcm_uart_shutdown, + .set_termios = bcm_uart_set_termios, + .type = bcm_uart_type, + .release_port = bcm_uart_release_port, + .request_port = bcm_uart_request_port, + .config_port = bcm_uart_config_port, + .verify_port = bcm_uart_verify_port, +}; + + + +#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE +static inline void wait_for_xmitr(struct uart_port *port) +{ + unsigned int tmout; + + /* Wait up to 10ms for the character(s) to be sent. */ + tmout = 10000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (port->flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_CTS_MASK) + break; + udelay(1); + } + } +} + +/* + * output given char + */ +static void bcm_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + bcm_uart_writel(port, ch, UART_FIFO_REG); +} + +/* + * console core request to output given string + */ +static void bcm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + unsigned long flags; + int locked; + + port = &ports[co->index]; + + local_irq_save(flags); + if (port->sysrq) { + /* bcm_uart_interrupt() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + /* call helper to deal with \r\n */ + uart_console_write(port, s, count, bcm_console_putchar); + + /* and wait for char to be transmitted */ + wait_for_xmitr(port); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +/* + * console core request to setup given console, find matching uart + * port and setup it. + */ +static int bcm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) + return -EINVAL; + port = &ports[co->index]; + if (!port->membase) + return -ENODEV; + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver bcm_uart_driver; + +static struct console bcm63xx_console = { + .name = "ttyS", + .write = bcm_console_write, + .device = uart_console_device, + .setup = bcm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bcm_uart_driver, +}; + +static int __init bcm63xx_console_init(void) +{ + register_console(&bcm63xx_console); + return 0; +} + +console_initcall(bcm63xx_console_init); + +#define BCM63XX_CONSOLE (&bcm63xx_console) +#else +#define BCM63XX_CONSOLE NULL +#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ + +static struct uart_driver bcm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "bcm63xx_uart", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 1, + .cons = BCM63XX_CONSOLE, +}; + +/* + * platform driver probe/remove callback + */ +static int __devinit bcm_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem, *res_irq; + struct uart_port *port; + struct clk *clk; + int ret; + + if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) + return -EINVAL; + + if (ports[pdev->id].membase) + return -EBUSY; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + return -ENODEV; + + clk = clk_get(&pdev->dev, "periph"); + if (IS_ERR(clk)) + return -ENODEV; + + port = &ports[pdev->id]; + memset(port, 0, sizeof(*port)); + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->irq = res_irq->start; + port->ops = &bcm_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + port->fifosize = 16; + port->uartclk = clk_get_rate(clk) / 2; + clk_put(clk); + + ret = uart_add_one_port(&bcm_uart_driver, port); + if (ret) { + kfree(port); + return ret; + } + platform_set_drvdata(pdev, port); + return 0; +} + +static int __devexit bcm_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&bcm_uart_driver, port); + platform_set_drvdata(pdev, NULL); + /* mark port as free */ + ports[pdev->id].membase = 0; + return 0; +} + +/* + * platform driver stuff + */ +static struct platform_driver bcm_uart_platform_driver = { + .probe = bcm_uart_probe, + .remove = __devexit_p(bcm_uart_remove), + .driver = { + .owner = THIS_MODULE, + .name = "bcm63xx_uart", + }, +}; + +static int __init bcm_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&bcm_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&bcm_uart_platform_driver); + if (ret) + uart_unregister_driver(&bcm_uart_driver); + + return ret; +} + +static void __exit bcm_uart_exit(void) +{ + platform_driver_unregister(&bcm_uart_platform_driver); + uart_unregister_driver(&bcm_uart_driver); +} + +module_init(bcm_uart_init); +module_exit(bcm_uart_exit); + +MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); +MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 2d7feecaf49..0028b6f89ce 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -307,7 +307,7 @@ static void stop_processor(struct icom_port *icom_port) if (port < 4) { temp = readl(stop_proc[port].global_control_reg); temp = - (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; writel(temp, stop_proc[port].global_control_reg); /* write flush */ @@ -336,7 +336,7 @@ static void start_processor(struct icom_port *icom_port) if (port < 4) { temp = readl(start_proc[port].global_control_reg); temp = - (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; writel(temp, start_proc[port].global_control_reg); /* write flush */ @@ -509,8 +509,8 @@ static void load_code(struct icom_port *icom_port) dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); } - if (new_page != NULL) - pci_free_consistent(dev, 4096, new_page, temp_pci); + if (new_page != NULL) + pci_free_consistent(dev, 4096, new_page, temp_pci); } static int startup(struct icom_port *icom_port) @@ -1493,15 +1493,15 @@ static int __devinit icom_probe(struct pci_dev *dev, const struct pci_device_id *ent) { int index; - unsigned int command_reg; - int retval; - struct icom_adapter *icom_adapter; - struct icom_port *icom_port; + unsigned int command_reg; + int retval; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; - retval = pci_enable_device(dev); - if (retval) { + retval = pci_enable_device(dev); + if (retval) { dev_err(&dev->dev, "Device enable FAILED\n"); - return retval; + return retval; } if ( (retval = pci_request_regions(dev, "icom"))) { @@ -1510,23 +1510,23 @@ static int __devinit icom_probe(struct pci_dev *dev, return retval; } - pci_set_master(dev); + pci_set_master(dev); - if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { + if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { dev_err(&dev->dev, "PCI Config read FAILED\n"); - return retval; - } + return retval; + } pci_write_config_dword(dev, PCI_COMMAND, command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - if (ent->driver_data == ADAPTER_V1) { + if (ent->driver_data == ADAPTER_V1) { pci_write_config_dword(dev, 0x44, 0x8300830A); - } else { + } else { pci_write_config_dword(dev, 0x44, 0x42004200); pci_write_config_dword(dev, 0x48, 0x42004200); - } + } retval = icom_alloc_adapter(&icom_adapter); @@ -1536,10 +1536,10 @@ static int __devinit icom_probe(struct pci_dev *dev, goto probe_exit0; } - icom_adapter->base_addr_pci = pci_resource_start(dev, 0); - icom_adapter->pci_dev = dev; - icom_adapter->version = ent->driver_data; - icom_adapter->subsystem_id = ent->subdevice; + icom_adapter->base_addr_pci = pci_resource_start(dev, 0); + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; retval = icom_init_ports(icom_adapter); @@ -1548,7 +1548,7 @@ static int __devinit icom_probe(struct pci_dev *dev, goto probe_exit1; } - icom_adapter->base_addr = pci_ioremap_bar(dev, 0); + icom_adapter->base_addr = pci_ioremap_bar(dev, 0); if (!icom_adapter->base_addr) goto probe_exit1; @@ -1562,7 +1562,7 @@ static int __devinit icom_probe(struct pci_dev *dev, retval = icom_load_ports(icom_adapter); - for (index = 0; index < icom_adapter->numb_ports; index++) { + for (index = 0; index < icom_adapter->numb_ports; index++) { icom_port = &icom_adapter->port_info[index]; if (icom_port->status == ICOM_PORT_ACTIVE) { @@ -1579,7 +1579,7 @@ static int __devinit icom_probe(struct pci_dev *dev, icom_port->status = ICOM_PORT_OFF; dev_err(&dev->dev, "Device add failed\n"); } else - dev_info(&dev->dev, "Device added\n"); + dev_info(&dev->dev, "Device added\n"); } } @@ -1595,9 +1595,7 @@ probe_exit0: pci_release_regions(dev); pci_disable_device(dev); - return retval; - - + return retval; } static void __devexit icom_remove(struct pci_dev *dev) diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 0f7cf4c453e..c50e9fbbf74 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -221,21 +221,26 @@ sio_quot_set(struct uart_txx9_port *up, int quot) sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); } +static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) +{ + return container_of(port, struct uart_txx9_port, port); +} + static void serial_txx9_stop_tx(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); } static void serial_txx9_start_tx(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); } static void serial_txx9_stop_rx(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; } @@ -246,7 +251,7 @@ static void serial_txx9_enable_ms(struct uart_port *port) static void serial_txx9_initialize(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int tmout = 10000; sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); @@ -414,7 +419,7 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) static unsigned int serial_txx9_tx_empty(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; unsigned int ret; @@ -427,7 +432,7 @@ static unsigned int serial_txx9_tx_empty(struct uart_port *port) static unsigned int serial_txx9_get_mctrl(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int ret; /* no modem control lines */ @@ -440,7 +445,7 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port) static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); if (mctrl & TIOCM_RTS) sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); @@ -450,7 +455,7 @@ static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) static void serial_txx9_break_ctl(struct uart_port *port, int break_state) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; spin_lock_irqsave(&up->port.lock, flags); @@ -494,7 +499,7 @@ static int serial_txx9_get_poll_char(struct uart_port *port) { unsigned int ier; unsigned char c; - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); /* * First save the IER then disable the interrupts @@ -520,7 +525,7 @@ static int serial_txx9_get_poll_char(struct uart_port *port) static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) { unsigned int ier; - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); /* * First save the IER then disable the interrupts @@ -551,7 +556,7 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) static int serial_txx9_startup(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; int retval; @@ -596,7 +601,7 @@ static int serial_txx9_startup(struct uart_port *port) static void serial_txx9_shutdown(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; /* @@ -636,7 +641,7 @@ static void serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -814,19 +819,19 @@ static void serial_txx9_release_resource(struct uart_txx9_port *up) static void serial_txx9_release_port(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); serial_txx9_release_resource(up); } static int serial_txx9_request_port(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); return serial_txx9_request_resource(up); } static void serial_txx9_config_port(struct uart_port *port, int uflags) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); int ret; /* @@ -897,7 +902,7 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv, static void serial_txx9_console_putchar(struct uart_port *port, int ch) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); wait_for_xmitr(up); sio_out(up, TXX9_SITFIFO, ch); diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 6d7a3f82c54..21a118269ca 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o -obj-$(CONFIG_SPI_IMX) += mxc_spi.o +obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/spi_imx.c index b1447236ae8..89c22efedfb 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/spi_imx.c @@ -48,14 +48,14 @@ #define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ #define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ -struct mxc_spi_config { +struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; unsigned int mode; int cs; }; -struct mxc_spi_data { +struct spi_imx_data { struct spi_bitbang bitbang; struct completion xfer_done; @@ -66,43 +66,43 @@ struct mxc_spi_data { int *chipselect; unsigned int count; - void (*tx)(struct mxc_spi_data *); - void (*rx)(struct mxc_spi_data *); + void (*tx)(struct spi_imx_data *); + void (*rx)(struct spi_imx_data *); void *rx_buf; const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ /* SoC specific functions */ - void (*intctrl)(struct mxc_spi_data *, int); - int (*config)(struct mxc_spi_data *, struct mxc_spi_config *); - void (*trigger)(struct mxc_spi_data *); - int (*rx_available)(struct mxc_spi_data *); + void (*intctrl)(struct spi_imx_data *, int); + int (*config)(struct spi_imx_data *, struct spi_imx_config *); + void (*trigger)(struct spi_imx_data *); + int (*rx_available)(struct spi_imx_data *); }; #define MXC_SPI_BUF_RX(type) \ -static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi) \ +static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \ { \ - unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA); \ + unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \ \ - if (mxc_spi->rx_buf) { \ - *(type *)mxc_spi->rx_buf = val; \ - mxc_spi->rx_buf += sizeof(type); \ + if (spi_imx->rx_buf) { \ + *(type *)spi_imx->rx_buf = val; \ + spi_imx->rx_buf += sizeof(type); \ } \ } #define MXC_SPI_BUF_TX(type) \ -static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi) \ +static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \ { \ type val = 0; \ \ - if (mxc_spi->tx_buf) { \ - val = *(type *)mxc_spi->tx_buf; \ - mxc_spi->tx_buf += sizeof(type); \ + if (spi_imx->tx_buf) { \ + val = *(type *)spi_imx->tx_buf; \ + spi_imx->tx_buf += sizeof(type); \ } \ \ - mxc_spi->count -= sizeof(type); \ + spi_imx->count -= sizeof(type); \ \ - writel(val, mxc_spi->base + MXC_CSPITXDATA); \ + writel(val, spi_imx->base + MXC_CSPITXDATA); \ } MXC_SPI_BUF_RX(u8) @@ -119,7 +119,7 @@ static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, 1024}; /* MX21, MX27 */ -static unsigned int mxc_spi_clkdiv_1(unsigned int fin, +static unsigned int spi_imx_clkdiv_1(unsigned int fin, unsigned int fspi) { int i, max; @@ -137,7 +137,7 @@ static unsigned int mxc_spi_clkdiv_1(unsigned int fin, } /* MX1, MX31, MX35 */ -static unsigned int mxc_spi_clkdiv_2(unsigned int fin, +static unsigned int spi_imx_clkdiv_2(unsigned int fin, unsigned int fspi) { int i, div = 4; @@ -174,7 +174,7 @@ static unsigned int mxc_spi_clkdiv_2(unsigned int fin, * the i.MX35 has a slightly different register layout for bits * we do not use here. */ -static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable) +static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -183,24 +183,24 @@ static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable) if (enable & MXC_INT_RR) val |= MX31_INTREG_RREN; - writel(val, mxc_spi->base + MXC_CSPIINT); + writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx31_trigger(struct mxc_spi_data *mxc_spi) +static void mx31_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; - reg = readl(mxc_spi->base + MXC_CSPICTRL); + reg = readl(spi_imx->base + MXC_CSPICTRL); reg |= MX31_CSPICTRL_XCH; - writel(reg, mxc_spi->base + MXC_CSPICTRL); + writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx31_config(struct mxc_spi_data *mxc_spi, - struct mxc_spi_config *config) +static int mx31_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) { unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; - reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) << + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << MX31_CSPICTRL_DR_SHIFT; if (cpu_is_mx31()) @@ -223,14 +223,14 @@ static int mx31_config(struct mxc_spi_data *mxc_spi, reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT; } - writel(reg, mxc_spi->base + MXC_CSPICTRL); + writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx31_rx_available(struct mxc_spi_data *mxc_spi) +static int mx31_rx_available(struct spi_imx_data *spi_imx) { - return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR; + return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; } #define MX27_INTREG_RR (1 << 4) @@ -246,7 +246,7 @@ static int mx31_rx_available(struct mxc_spi_data *mxc_spi) #define MX27_CSPICTRL_DR_SHIFT 14 #define MX27_CSPICTRL_CS_SHIFT 19 -static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable) +static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -255,24 +255,24 @@ static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable) if (enable & MXC_INT_RR) val |= MX27_INTREG_RREN; - writel(val, mxc_spi->base + MXC_CSPIINT); + writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx27_trigger(struct mxc_spi_data *mxc_spi) +static void mx27_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; - reg = readl(mxc_spi->base + MXC_CSPICTRL); + reg = readl(spi_imx->base + MXC_CSPICTRL); reg |= MX27_CSPICTRL_XCH; - writel(reg, mxc_spi->base + MXC_CSPICTRL); + writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx27_config(struct mxc_spi_data *mxc_spi, - struct mxc_spi_config *config) +static int mx27_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) { unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; - reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) << + reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << MX27_CSPICTRL_DR_SHIFT; reg |= config->bpw - 1; @@ -285,14 +285,14 @@ static int mx27_config(struct mxc_spi_data *mxc_spi, if (config->cs < 0) reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT; - writel(reg, mxc_spi->base + MXC_CSPICTRL); + writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx27_rx_available(struct mxc_spi_data *mxc_spi) +static int mx27_rx_available(struct spi_imx_data *spi_imx) { - return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR; + return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; } #define MX1_INTREG_RR (1 << 3) @@ -306,7 +306,7 @@ static int mx27_rx_available(struct mxc_spi_data *mxc_spi) #define MX1_CSPICTRL_MASTER (1 << 10) #define MX1_CSPICTRL_DR_SHIFT 13 -static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable) +static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -315,24 +315,24 @@ static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable) if (enable & MXC_INT_RR) val |= MX1_INTREG_RREN; - writel(val, mxc_spi->base + MXC_CSPIINT); + writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx1_trigger(struct mxc_spi_data *mxc_spi) +static void mx1_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; - reg = readl(mxc_spi->base + MXC_CSPICTRL); + reg = readl(spi_imx->base + MXC_CSPICTRL); reg |= MX1_CSPICTRL_XCH; - writel(reg, mxc_spi->base + MXC_CSPICTRL); + writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx1_config(struct mxc_spi_data *mxc_spi, - struct mxc_spi_config *config) +static int mx1_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) { unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; - reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) << + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << MX1_CSPICTRL_DR_SHIFT; reg |= config->bpw - 1; @@ -341,156 +341,151 @@ static int mx1_config(struct mxc_spi_data *mxc_spi, if (config->mode & SPI_CPOL) reg |= MX1_CSPICTRL_POL; - writel(reg, mxc_spi->base + MXC_CSPICTRL); + writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx1_rx_available(struct mxc_spi_data *mxc_spi) +static int mx1_rx_available(struct spi_imx_data *spi_imx) { - return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR; + return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR; } -static void mxc_spi_chipselect(struct spi_device *spi, int is_active) +static void spi_imx_chipselect(struct spi_device *spi, int is_active) { - struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master); - unsigned int cs = 0; - int gpio = mxc_spi->chipselect[spi->chip_select]; - struct mxc_spi_config config; + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + int gpio = spi_imx->chipselect[spi->chip_select]; + int active = is_active != BITBANG_CS_INACTIVE; + int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH); - if (spi->mode & SPI_CS_HIGH) - cs = 1; - - if (is_active == BITBANG_CS_INACTIVE) { - if (gpio >= 0) - gpio_set_value(gpio, !cs); + if (gpio < 0) return; - } - - config.bpw = spi->bits_per_word; - config.speed_hz = spi->max_speed_hz; - config.mode = spi->mode; - config.cs = mxc_spi->chipselect[spi->chip_select]; - - mxc_spi->config(mxc_spi, &config); - - /* Initialize the functions for transfer */ - if (config.bpw <= 8) { - mxc_spi->rx = mxc_spi_buf_rx_u8; - mxc_spi->tx = mxc_spi_buf_tx_u8; - } else if (config.bpw <= 16) { - mxc_spi->rx = mxc_spi_buf_rx_u16; - mxc_spi->tx = mxc_spi_buf_tx_u16; - } else if (config.bpw <= 32) { - mxc_spi->rx = mxc_spi_buf_rx_u32; - mxc_spi->tx = mxc_spi_buf_tx_u32; - } else - BUG(); - if (gpio >= 0) - gpio_set_value(gpio, cs); - - return; + gpio_set_value(gpio, dev_is_lowactive ^ active); } -static void mxc_spi_push(struct mxc_spi_data *mxc_spi) +static void spi_imx_push(struct spi_imx_data *spi_imx) { - while (mxc_spi->txfifo < 8) { - if (!mxc_spi->count) + while (spi_imx->txfifo < 8) { + if (!spi_imx->count) break; - mxc_spi->tx(mxc_spi); - mxc_spi->txfifo++; + spi_imx->tx(spi_imx); + spi_imx->txfifo++; } - mxc_spi->trigger(mxc_spi); + spi_imx->trigger(spi_imx); } -static irqreturn_t mxc_spi_isr(int irq, void *dev_id) +static irqreturn_t spi_imx_isr(int irq, void *dev_id) { - struct mxc_spi_data *mxc_spi = dev_id; + struct spi_imx_data *spi_imx = dev_id; - while (mxc_spi->rx_available(mxc_spi)) { - mxc_spi->rx(mxc_spi); - mxc_spi->txfifo--; + while (spi_imx->rx_available(spi_imx)) { + spi_imx->rx(spi_imx); + spi_imx->txfifo--; } - if (mxc_spi->count) { - mxc_spi_push(mxc_spi); + if (spi_imx->count) { + spi_imx_push(spi_imx); return IRQ_HANDLED; } - if (mxc_spi->txfifo) { + if (spi_imx->txfifo) { /* No data left to push, but still waiting for rx data, * enable receive data available interrupt. */ - mxc_spi->intctrl(mxc_spi, MXC_INT_RR); + spi_imx->intctrl(spi_imx, MXC_INT_RR); return IRQ_HANDLED; } - mxc_spi->intctrl(mxc_spi, 0); - complete(&mxc_spi->xfer_done); + spi_imx->intctrl(spi_imx, 0); + complete(&spi_imx->xfer_done); return IRQ_HANDLED; } -static int mxc_spi_setupxfer(struct spi_device *spi, +static int spi_imx_setupxfer(struct spi_device *spi, struct spi_transfer *t) { - struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master); - struct mxc_spi_config config; + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + struct spi_imx_config config; config.bpw = t ? t->bits_per_word : spi->bits_per_word; config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; config.mode = spi->mode; + config.cs = spi_imx->chipselect[spi->chip_select]; + + if (!config.speed_hz) + config.speed_hz = spi->max_speed_hz; + if (!config.bpw) + config.bpw = spi->bits_per_word; + if (!config.speed_hz) + config.speed_hz = spi->max_speed_hz; + + /* Initialize the functions for transfer */ + if (config.bpw <= 8) { + spi_imx->rx = spi_imx_buf_rx_u8; + spi_imx->tx = spi_imx_buf_tx_u8; + } else if (config.bpw <= 16) { + spi_imx->rx = spi_imx_buf_rx_u16; + spi_imx->tx = spi_imx_buf_tx_u16; + } else if (config.bpw <= 32) { + spi_imx->rx = spi_imx_buf_rx_u32; + spi_imx->tx = spi_imx_buf_tx_u32; + } else + BUG(); - mxc_spi->config(mxc_spi, &config); + spi_imx->config(spi_imx, &config); return 0; } -static int mxc_spi_transfer(struct spi_device *spi, +static int spi_imx_transfer(struct spi_device *spi, struct spi_transfer *transfer) { - struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master); + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - mxc_spi->tx_buf = transfer->tx_buf; - mxc_spi->rx_buf = transfer->rx_buf; - mxc_spi->count = transfer->len; - mxc_spi->txfifo = 0; + spi_imx->tx_buf = transfer->tx_buf; + spi_imx->rx_buf = transfer->rx_buf; + spi_imx->count = transfer->len; + spi_imx->txfifo = 0; - init_completion(&mxc_spi->xfer_done); + init_completion(&spi_imx->xfer_done); - mxc_spi_push(mxc_spi); + spi_imx_push(spi_imx); - mxc_spi->intctrl(mxc_spi, MXC_INT_TE); + spi_imx->intctrl(spi_imx, MXC_INT_TE); - wait_for_completion(&mxc_spi->xfer_done); + wait_for_completion(&spi_imx->xfer_done); return transfer->len; } -static int mxc_spi_setup(struct spi_device *spi) +static int spi_imx_setup(struct spi_device *spi) { - if (!spi->bits_per_word) - spi->bits_per_word = 8; + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + int gpio = spi_imx->chipselect[spi->chip_select]; pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__, spi->mode, spi->bits_per_word, spi->max_speed_hz); - mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE); + if (gpio >= 0) + gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); + + spi_imx_chipselect(spi, BITBANG_CS_INACTIVE); return 0; } -static void mxc_spi_cleanup(struct spi_device *spi) +static void spi_imx_cleanup(struct spi_device *spi) { } -static int __init mxc_spi_probe(struct platform_device *pdev) +static int __init spi_imx_probe(struct platform_device *pdev) { struct spi_imx_master *mxc_platform_info; struct spi_master *master; - struct mxc_spi_data *mxc_spi; + struct spi_imx_data *spi_imx; struct resource *res; int i, ret; @@ -500,7 +495,7 @@ static int __init mxc_spi_probe(struct platform_device *pdev) return -EINVAL; } - master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data)); + master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data)); if (!master) return -ENOMEM; @@ -509,32 +504,32 @@ static int __init mxc_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = mxc_platform_info->num_chipselect; - mxc_spi = spi_master_get_devdata(master); - mxc_spi->bitbang.master = spi_master_get(master); - mxc_spi->chipselect = mxc_platform_info->chipselect; + spi_imx = spi_master_get_devdata(master); + spi_imx->bitbang.master = spi_master_get(master); + spi_imx->chipselect = mxc_platform_info->chipselect; for (i = 0; i < master->num_chipselect; i++) { - if (mxc_spi->chipselect[i] < 0) + if (spi_imx->chipselect[i] < 0) continue; - ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME); + ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); if (ret) { i--; while (i > 0) - if (mxc_spi->chipselect[i] >= 0) - gpio_free(mxc_spi->chipselect[i--]); + if (spi_imx->chipselect[i] >= 0) + gpio_free(spi_imx->chipselect[i--]); dev_err(&pdev->dev, "can't get cs gpios"); goto out_master_put; } - gpio_direction_output(mxc_spi->chipselect[i], 1); } - mxc_spi->bitbang.chipselect = mxc_spi_chipselect; - mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer; - mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer; - mxc_spi->bitbang.master->setup = mxc_spi_setup; - mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup; + spi_imx->bitbang.chipselect = spi_imx_chipselect; + spi_imx->bitbang.setup_transfer = spi_imx_setupxfer; + spi_imx->bitbang.txrx_bufs = spi_imx_transfer; + spi_imx->bitbang.master->setup = spi_imx_setup; + spi_imx->bitbang.master->cleanup = spi_imx_cleanup; + spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - init_completion(&mxc_spi->xfer_done); + init_completion(&spi_imx->xfer_done); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -549,58 +544,58 @@ static int __init mxc_spi_probe(struct platform_device *pdev) goto out_gpio_free; } - mxc_spi->base = ioremap(res->start, resource_size(res)); - if (!mxc_spi->base) { + spi_imx->base = ioremap(res->start, resource_size(res)); + if (!spi_imx->base) { ret = -EINVAL; goto out_release_mem; } - mxc_spi->irq = platform_get_irq(pdev, 0); - if (!mxc_spi->irq) { + spi_imx->irq = platform_get_irq(pdev, 0); + if (!spi_imx->irq) { ret = -EINVAL; goto out_iounmap; } - ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi); + ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx); if (ret) { - dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret); + dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret); goto out_iounmap; } if (cpu_is_mx31() || cpu_is_mx35()) { - mxc_spi->intctrl = mx31_intctrl; - mxc_spi->config = mx31_config; - mxc_spi->trigger = mx31_trigger; - mxc_spi->rx_available = mx31_rx_available; + spi_imx->intctrl = mx31_intctrl; + spi_imx->config = mx31_config; + spi_imx->trigger = mx31_trigger; + spi_imx->rx_available = mx31_rx_available; } else if (cpu_is_mx27() || cpu_is_mx21()) { - mxc_spi->intctrl = mx27_intctrl; - mxc_spi->config = mx27_config; - mxc_spi->trigger = mx27_trigger; - mxc_spi->rx_available = mx27_rx_available; + spi_imx->intctrl = mx27_intctrl; + spi_imx->config = mx27_config; + spi_imx->trigger = mx27_trigger; + spi_imx->rx_available = mx27_rx_available; } else if (cpu_is_mx1()) { - mxc_spi->intctrl = mx1_intctrl; - mxc_spi->config = mx1_config; - mxc_spi->trigger = mx1_trigger; - mxc_spi->rx_available = mx1_rx_available; + spi_imx->intctrl = mx1_intctrl; + spi_imx->config = mx1_config; + spi_imx->trigger = mx1_trigger; + spi_imx->rx_available = mx1_rx_available; } else BUG(); - mxc_spi->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(mxc_spi->clk)) { + spi_imx->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(spi_imx->clk)) { dev_err(&pdev->dev, "unable to get clock\n"); - ret = PTR_ERR(mxc_spi->clk); + ret = PTR_ERR(spi_imx->clk); goto out_free_irq; } - clk_enable(mxc_spi->clk); - mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk); + clk_enable(spi_imx->clk); + spi_imx->spi_clk = clk_get_rate(spi_imx->clk); if (!cpu_is_mx31() || !cpu_is_mx35()) - writel(1, mxc_spi->base + MXC_RESET); + writel(1, spi_imx->base + MXC_RESET); - mxc_spi->intctrl(mxc_spi, 0); + spi_imx->intctrl(spi_imx, 0); - ret = spi_bitbang_start(&mxc_spi->bitbang); + ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); goto out_clk_put; @@ -611,18 +606,18 @@ static int __init mxc_spi_probe(struct platform_device *pdev) return ret; out_clk_put: - clk_disable(mxc_spi->clk); - clk_put(mxc_spi->clk); + clk_disable(spi_imx->clk); + clk_put(spi_imx->clk); out_free_irq: - free_irq(mxc_spi->irq, mxc_spi); + free_irq(spi_imx->irq, spi_imx); out_iounmap: - iounmap(mxc_spi->base); + iounmap(spi_imx->base); out_release_mem: release_mem_region(res->start, resource_size(res)); out_gpio_free: for (i = 0; i < master->num_chipselect; i++) - if (mxc_spi->chipselect[i] >= 0) - gpio_free(mxc_spi->chipselect[i]); + if (spi_imx->chipselect[i] >= 0) + gpio_free(spi_imx->chipselect[i]); out_master_put: spi_master_put(master); kfree(master); @@ -630,24 +625,24 @@ out_master_put: return ret; } -static int __exit mxc_spi_remove(struct platform_device *pdev) +static int __exit spi_imx_remove(struct platform_device *pdev) { struct spi_master *master = platform_get_drvdata(pdev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master); + struct spi_imx_data *spi_imx = spi_master_get_devdata(master); int i; - spi_bitbang_stop(&mxc_spi->bitbang); + spi_bitbang_stop(&spi_imx->bitbang); - writel(0, mxc_spi->base + MXC_CSPICTRL); - clk_disable(mxc_spi->clk); - clk_put(mxc_spi->clk); - free_irq(mxc_spi->irq, mxc_spi); - iounmap(mxc_spi->base); + writel(0, spi_imx->base + MXC_CSPICTRL); + clk_disable(spi_imx->clk); + clk_put(spi_imx->clk); + free_irq(spi_imx->irq, spi_imx); + iounmap(spi_imx->base); for (i = 0; i < master->num_chipselect; i++) - if (mxc_spi->chipselect[i] >= 0) - gpio_free(mxc_spi->chipselect[i]); + if (spi_imx->chipselect[i] >= 0) + gpio_free(spi_imx->chipselect[i]); spi_master_put(master); @@ -658,27 +653,27 @@ static int __exit mxc_spi_remove(struct platform_device *pdev) return 0; } -static struct platform_driver mxc_spi_driver = { +static struct platform_driver spi_imx_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, }, - .probe = mxc_spi_probe, - .remove = __exit_p(mxc_spi_remove), + .probe = spi_imx_probe, + .remove = __exit_p(spi_imx_remove), }; -static int __init mxc_spi_init(void) +static int __init spi_imx_init(void) { - return platform_driver_register(&mxc_spi_driver); + return platform_driver_register(&spi_imx_driver); } -static void __exit mxc_spi_exit(void) +static void __exit spi_imx_exit(void) { - platform_driver_unregister(&mxc_spi_driver); + platform_driver_unregister(&spi_imx_driver); } -module_init(mxc_spi_init); -module_exit(mxc_spi_exit); +module_init(spi_imx_init); +module_exit(spi_imx_exit); MODULE_DESCRIPTION("SPI Master Controller driver"); MODULE_AUTHOR("Sascha Hauer, Pengutronix"); diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index f921bd1109e..5d23983f02f 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -537,7 +537,7 @@ static int spidev_release(struct inode *inode, struct file *filp) return status; } -static struct file_operations spidev_fops = { +static const struct file_operations spidev_fops = { .owner = THIS_MODULE, /* REVISIT switch to aio primitives, so that userspace * gets more complete API coverage. It'll simplify things diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 333ee02e7b2..864f0ba6a34 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -993,7 +993,7 @@ skip_io_on_zombie: return retval; } -static struct file_operations fops = { +static const struct file_operations fops = { .owner = THIS_MODULE, .read = usbtmc_read, .write = usbtmc_write, diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 29500154d00..2d867fd2241 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -875,7 +875,7 @@ printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) } /* used after endpoint configuration */ -static struct file_operations printer_io_operations = { +static const struct file_operations printer_io_operations = { .owner = THIS_MODULE, .open = printer_open, .read = printer_read, diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c index cf2d45946c5..2273c815941 100644 --- a/drivers/usb/host/whci/debug.c +++ b/drivers/usb/host/whci/debug.c @@ -134,7 +134,7 @@ static int pzl_open(struct inode *inode, struct file *file) return single_open(file, pzl_print, inode->i_private); } -static struct file_operations di_fops = { +static const struct file_operations di_fops = { .open = di_open, .read = seq_read, .llseek = seq_lseek, @@ -142,7 +142,7 @@ static struct file_operations di_fops = { .owner = THIS_MODULE, }; -static struct file_operations asl_fops = { +static const struct file_operations asl_fops = { .open = asl_open, .read = seq_read, .llseek = seq_lseek, @@ -150,7 +150,7 @@ static struct file_operations asl_fops = { .owner = THIS_MODULE, }; -static struct file_operations pzl_fops = { +static const struct file_operations pzl_fops = { .open = pzl_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index d645f3899fe..32d0199d0c3 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -429,8 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) return read_count; } -static struct -file_operations usb_rio_fops = { +static const struct file_operations usb_rio_fops = { .owner = THIS_MODULE, .read = read_rio, .write = write_rio, diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c index 4a42993700c..2eecec0c13c 100644 --- a/drivers/uwb/uwb-debug.c +++ b/drivers/uwb/uwb-debug.c @@ -205,7 +205,7 @@ static ssize_t command_write(struct file *file, const char __user *buf, return ret < 0 ? ret : len; } -static struct file_operations command_fops = { +static const struct file_operations command_fops = { .open = command_open, .write = command_write, .read = NULL, @@ -255,7 +255,7 @@ static int reservations_open(struct inode *inode, struct file *file) return single_open(file, reservations_print, inode->i_private); } -static struct file_operations reservations_fops = { +static const struct file_operations reservations_fops = { .open = reservations_open, .read = seq_read, .llseek = seq_lseek, @@ -283,7 +283,7 @@ static int drp_avail_open(struct inode *inode, struct file *file) return single_open(file, drp_avail_print, inode->i_private); } -static struct file_operations drp_avail_fops = { +static const struct file_operations drp_avail_fops = { .open = drp_avail_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index a1f2e7ce730..99bbd282ce6 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1800,7 +1800,7 @@ static int __init video_setup(char *options) global = 1; } - if (!global && !strstr(options, "fb:")) { + if (!global && !strchr(options, ':')) { fb_mode_option = options; global = 1; } diff --git a/fs/afs/cache.h b/fs/afs/cache.h deleted file mode 100644 index 5c4f6b499e9..00000000000 --- a/fs/afs/cache.h +++ /dev/null @@ -1,12 +0,0 @@ -/* AFS local cache management interface - * - * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/fscache.h> diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 106be66dafd..6ece2a13bf7 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -18,10 +18,10 @@ #include <linux/key.h> #include <linux/workqueue.h> #include <linux/sched.h> +#include <linux/fscache.h> #include "afs.h" #include "afs_vl.h" -#include "cache.h" #define AFS_CELL_MAX_ADDRS 15 diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8184f2feb2f..dd8ced9814c 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2335,7 +2335,7 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync); int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, int skip_pinned); int btrfs_check_file(struct btrfs_root *root, struct inode *inode); -extern struct file_operations btrfs_file_operations; +extern const struct file_operations btrfs_file_operations; int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, u64 start, u64 end, u64 locked_end, diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index ca784a7fbeb..f19e1259a97 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1213,7 +1213,7 @@ static int btrfs_file_mmap(struct file *filp, struct vm_area_struct *vma) return 0; } -struct file_operations btrfs_file_operations = { +const struct file_operations btrfs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f4001112df7..112e5aa8589 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -62,7 +62,7 @@ static const struct inode_operations btrfs_special_inode_operations; static const struct inode_operations btrfs_file_inode_operations; static const struct address_space_operations btrfs_aops; static const struct address_space_operations btrfs_symlink_aops; -static struct file_operations btrfs_dir_file_operations; +static const struct file_operations btrfs_dir_file_operations; static struct extent_io_ops btrfs_extent_io_ops; static struct kmem_cache *btrfs_inode_cachep; @@ -5715,7 +5715,7 @@ static const struct inode_operations btrfs_dir_ro_inode_operations = { .permission = btrfs_permission, }; -static struct file_operations btrfs_dir_file_operations = { +static const struct file_operations btrfs_dir_file_operations = { .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = btrfs_real_readdir, diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index e227eea23f0..984ca0cb38c 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -65,6 +65,12 @@ typedef __u32 ext4_lblk_t; /* data type for block group number */ typedef unsigned int ext4_group_t; +/* + * Flags used in mballoc's allocation_context flags field. + * + * Also used to show what's going on for debugging purposes when the + * flag field is exported via the traceport interface + */ /* prefer goal again. length */ #define EXT4_MB_HINT_MERGE 0x0001 @@ -127,6 +133,16 @@ struct mpage_da_data { int pages_written; int retval; }; +#define DIO_AIO_UNWRITTEN 0x1 +typedef struct ext4_io_end { + struct list_head list; /* per-file finished AIO list */ + struct inode *inode; /* file being written to */ + unsigned int flag; /* unwritten or not */ + int error; /* I/O error code */ + ext4_lblk_t offset; /* offset in the file */ + size_t size; /* size of the extent */ + struct work_struct work; /* data work queue */ +} ext4_io_end_t; /* * Special inodes numbers @@ -347,7 +363,16 @@ struct ext4_new_group_data { /* Call ext4_da_update_reserve_space() after successfully allocating the blocks */ #define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE 0x0008 - + /* caller is from the direct IO path, request to creation of an + unitialized extents if not allocated, split the uninitialized + extent if blocks has been preallocated already*/ +#define EXT4_GET_BLOCKS_DIO 0x0010 +#define EXT4_GET_BLOCKS_CONVERT 0x0020 +#define EXT4_GET_BLOCKS_DIO_CREATE_EXT (EXT4_GET_BLOCKS_DIO|\ + EXT4_GET_BLOCKS_CREATE_UNINIT_EXT) + /* Convert extent to initialized after direct IO complete */ +#define EXT4_GET_BLOCKS_DIO_CONVERT_EXT (EXT4_GET_BLOCKS_CONVERT|\ + EXT4_GET_BLOCKS_DIO_CREATE_EXT) /* * ioctl commands @@ -500,8 +525,8 @@ struct move_extent { static inline __le32 ext4_encode_extra_time(struct timespec *time) { return cpu_to_le32((sizeof(time->tv_sec) > 4 ? - time->tv_sec >> 32 : 0) | - ((time->tv_nsec << 2) & EXT4_NSEC_MASK)); + (time->tv_sec >> 32) & EXT4_EPOCH_MASK : 0) | + ((time->tv_nsec << EXT4_EPOCH_BITS) & EXT4_NSEC_MASK)); } static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra) @@ -509,7 +534,7 @@ static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra) if (sizeof(time->tv_sec) > 4) time->tv_sec |= (__u64)(le32_to_cpu(extra) & EXT4_EPOCH_MASK) << 32; - time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> 2; + time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> EXT4_EPOCH_BITS; } #define EXT4_INODE_SET_XTIME(xtime, inode, raw_inode) \ @@ -672,6 +697,11 @@ struct ext4_inode_info { __u16 i_extra_isize; spinlock_t i_block_reservation_lock; + + /* completed async DIOs that might need unwritten extents handling */ + struct list_head i_aio_dio_complete_list; + /* current io_end structure for async DIO write*/ + ext4_io_end_t *cur_aio_dio; }; /* @@ -942,18 +972,11 @@ struct ext4_sb_info { unsigned int s_mb_stats; unsigned int s_mb_order2_reqs; unsigned int s_mb_group_prealloc; + unsigned int s_max_writeback_mb_bump; /* where last allocation was done - for stream allocation */ unsigned long s_mb_last_group; unsigned long s_mb_last_start; - /* history to debug policy */ - struct ext4_mb_history *s_mb_history; - int s_mb_history_cur; - int s_mb_history_max; - int s_mb_history_num; - spinlock_t s_mb_history_lock; - int s_mb_history_filter; - /* stats for buddy allocator */ spinlock_t s_mb_pa_lock; atomic_t s_bal_reqs; /* number of reqs with len > 1 */ @@ -980,6 +1003,9 @@ struct ext4_sb_info { unsigned int s_log_groups_per_flex; struct flex_groups *s_flex_groups; + + /* workqueue for dio unwritten */ + struct workqueue_struct *dio_unwritten_wq; }; static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb) @@ -1397,7 +1423,7 @@ extern int ext4_block_truncate_page(handle_t *handle, struct address_space *mapping, loff_t from); extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); extern qsize_t ext4_get_reserved_space(struct inode *inode); - +extern int flush_aio_dio_completed_IO(struct inode *inode); /* ioctl.c */ extern long ext4_ioctl(struct file *, unsigned int, unsigned long); extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long); @@ -1699,6 +1725,8 @@ extern void ext4_ext_init(struct super_block *); extern void ext4_ext_release(struct super_block *); extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset, loff_t len); +extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset, + loff_t len); extern int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, unsigned int max_blocks, struct buffer_head *bh, int flags); diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h index 61652f1d15e..2ca686454e8 100644 --- a/fs/ext4/ext4_extents.h +++ b/fs/ext4/ext4_extents.h @@ -220,6 +220,11 @@ static inline int ext4_ext_get_actual_len(struct ext4_extent *ext) (le16_to_cpu(ext->ee_len) - EXT_INIT_MAX_LEN)); } +static inline void ext4_ext_mark_initialized(struct ext4_extent *ext) +{ + ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext)); +} + extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks); extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex); extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *); @@ -235,7 +240,7 @@ extern int ext4_ext_try_to_merge(struct inode *inode, struct ext4_ext_path *path, struct ext4_extent *); extern unsigned int ext4_ext_check_overlap(struct inode *, struct ext4_extent *, struct ext4_ext_path *); -extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *); +extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *, int); extern int ext4_ext_walk_space(struct inode *, ext4_lblk_t, ext4_lblk_t, ext_prepare_callback, void *); extern struct ext4_ext_path *ext4_ext_find_extent(struct inode *, ext4_lblk_t, diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h index 139fb8cb87e..a2865980342 100644 --- a/fs/ext4/ext4_jbd2.h +++ b/fs/ext4/ext4_jbd2.h @@ -161,11 +161,13 @@ int __ext4_handle_dirty_metadata(const char *where, handle_t *handle, handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks); int __ext4_journal_stop(const char *where, handle_t *handle); -#define EXT4_NOJOURNAL_HANDLE ((handle_t *) 0x1) +#define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096) +/* Note: Do not use this for NULL handles. This is only to determine if + * a properly allocated handle is using a journal or not. */ static inline int ext4_handle_valid(handle_t *handle) { - if (handle == EXT4_NOJOURNAL_HANDLE) + if ((unsigned long)handle < EXT4_NOJOURNAL_MAX_REF_COUNT) return 0; return 1; } diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 7a383257792..10539e36428 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -723,7 +723,7 @@ err: * insert new index [@logical;@ptr] into the block at @curp; * check where to insert: before @curp or after @curp */ -static int ext4_ext_insert_index(handle_t *handle, struct inode *inode, +int ext4_ext_insert_index(handle_t *handle, struct inode *inode, struct ext4_ext_path *curp, int logical, ext4_fsblk_t ptr) { @@ -1586,7 +1586,7 @@ out: */ int ext4_ext_insert_extent(handle_t *handle, struct inode *inode, struct ext4_ext_path *path, - struct ext4_extent *newext) + struct ext4_extent *newext, int flag) { struct ext4_extent_header *eh; struct ext4_extent *ex, *fex; @@ -1602,7 +1602,8 @@ int ext4_ext_insert_extent(handle_t *handle, struct inode *inode, BUG_ON(path[depth].p_hdr == NULL); /* try to insert block into found extent and return */ - if (ex && ext4_can_extents_be_merged(inode, ex, newext)) { + if (ex && (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT) + && ext4_can_extents_be_merged(inode, ex, newext)) { ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n", ext4_ext_is_uninitialized(newext), ext4_ext_get_actual_len(newext), @@ -1722,7 +1723,8 @@ has_space: merge: /* try to merge extents to the right */ - ext4_ext_try_to_merge(inode, path, nearex); + if (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT) + ext4_ext_try_to_merge(inode, path, nearex); /* try to merge extents to the left */ @@ -2378,6 +2380,7 @@ void ext4_ext_init(struct super_block *sb) */ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) { +#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS) printk(KERN_INFO "EXT4-fs: file extents enabled"); #ifdef AGGRESSIVE_TEST printk(", aggressive tests"); @@ -2389,6 +2392,7 @@ void ext4_ext_init(struct super_block *sb) printk(", stats"); #endif printk("\n"); +#endif #ifdef EXTENTS_STATS spin_lock_init(&EXT4_SB(sb)->s_ext_stats_lock); EXT4_SB(sb)->s_ext_min = 1 << 30; @@ -2490,7 +2494,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex) } #define EXT4_EXT_ZERO_LEN 7 - /* * This function is called by ext4_ext_get_blocks() if someone tries to write * to an uninitialized extent. It may result in splitting the uninitialized @@ -2583,7 +2586,8 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ex3->ee_block = cpu_to_le32(iblock); ext4_ext_store_pblock(ex3, newblock); ex3->ee_len = cpu_to_le16(allocated); - err = ext4_ext_insert_extent(handle, inode, path, ex3); + err = ext4_ext_insert_extent(handle, inode, path, + ex3, 0); if (err == -ENOSPC) { err = ext4_ext_zeroout(inode, &orig_ex); if (err) @@ -2639,7 +2643,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ext4_ext_store_pblock(ex3, newblock + max_blocks); ex3->ee_len = cpu_to_le16(allocated - max_blocks); ext4_ext_mark_uninitialized(ex3); - err = ext4_ext_insert_extent(handle, inode, path, ex3); + err = ext4_ext_insert_extent(handle, inode, path, ex3, 0); if (err == -ENOSPC) { err = ext4_ext_zeroout(inode, &orig_ex); if (err) @@ -2757,7 +2761,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, err = ext4_ext_dirty(handle, inode, path + depth); goto out; insert: - err = ext4_ext_insert_extent(handle, inode, path, &newex); + err = ext4_ext_insert_extent(handle, inode, path, &newex, 0); if (err == -ENOSPC) { err = ext4_ext_zeroout(inode, &orig_ex); if (err) @@ -2785,6 +2789,324 @@ fix_extent_len: } /* + * This function is called by ext4_ext_get_blocks() from + * ext4_get_blocks_dio_write() when DIO to write + * to an uninitialized extent. + * + * Writing to an uninitized extent may result in splitting the uninitialized + * extent into multiple /intialized unintialized extents (up to three) + * There are three possibilities: + * a> There is no split required: Entire extent should be uninitialized + * b> Splits in two extents: Write is happening at either end of the extent + * c> Splits in three extents: Somone is writing in middle of the extent + * + * One of more index blocks maybe needed if the extent tree grow after + * the unintialized extent split. To prevent ENOSPC occur at the IO + * complete, we need to split the uninitialized extent before DIO submit + * the IO. The uninitilized extent called at this time will be split + * into three uninitialized extent(at most). After IO complete, the part + * being filled will be convert to initialized by the end_io callback function + * via ext4_convert_unwritten_extents(). + */ +static int ext4_split_unwritten_extents(handle_t *handle, + struct inode *inode, + struct ext4_ext_path *path, + ext4_lblk_t iblock, + unsigned int max_blocks, + int flags) +{ + struct ext4_extent *ex, newex, orig_ex; + struct ext4_extent *ex1 = NULL; + struct ext4_extent *ex2 = NULL; + struct ext4_extent *ex3 = NULL; + struct ext4_extent_header *eh; + ext4_lblk_t ee_block; + unsigned int allocated, ee_len, depth; + ext4_fsblk_t newblock; + int err = 0; + int ret = 0; + + ext_debug("ext4_split_unwritten_extents: inode %lu," + "iblock %llu, max_blocks %u\n", inode->i_ino, + (unsigned long long)iblock, max_blocks); + depth = ext_depth(inode); + eh = path[depth].p_hdr; + ex = path[depth].p_ext; + ee_block = le32_to_cpu(ex->ee_block); + ee_len = ext4_ext_get_actual_len(ex); + allocated = ee_len - (iblock - ee_block); + newblock = iblock - ee_block + ext_pblock(ex); + ex2 = ex; + orig_ex.ee_block = ex->ee_block; + orig_ex.ee_len = cpu_to_le16(ee_len); + ext4_ext_store_pblock(&orig_ex, ext_pblock(ex)); + + /* + * if the entire unintialized extent length less than + * the size of extent to write, there is no need to split + * uninitialized extent + */ + if (allocated <= max_blocks) + return ret; + + err = ext4_ext_get_access(handle, inode, path + depth); + if (err) + goto out; + /* ex1: ee_block to iblock - 1 : uninitialized */ + if (iblock > ee_block) { + ex1 = ex; + ex1->ee_len = cpu_to_le16(iblock - ee_block); + ext4_ext_mark_uninitialized(ex1); + ex2 = &newex; + } + /* + * for sanity, update the length of the ex2 extent before + * we insert ex3, if ex1 is NULL. This is to avoid temporary + * overlap of blocks. + */ + if (!ex1 && allocated > max_blocks) + ex2->ee_len = cpu_to_le16(max_blocks); + /* ex3: to ee_block + ee_len : uninitialised */ + if (allocated > max_blocks) { + unsigned int newdepth; + ex3 = &newex; + ex3->ee_block = cpu_to_le32(iblock + max_blocks); + ext4_ext_store_pblock(ex3, newblock + max_blocks); + ex3->ee_len = cpu_to_le16(allocated - max_blocks); + ext4_ext_mark_uninitialized(ex3); + err = ext4_ext_insert_extent(handle, inode, path, ex3, flags); + if (err == -ENOSPC) { + err = ext4_ext_zeroout(inode, &orig_ex); + if (err) + goto fix_extent_len; + /* update the extent length and mark as initialized */ + ex->ee_block = orig_ex.ee_block; + ex->ee_len = orig_ex.ee_len; + ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); + ext4_ext_dirty(handle, inode, path + depth); + /* zeroed the full extent */ + /* blocks available from iblock */ + return allocated; + + } else if (err) + goto fix_extent_len; + /* + * The depth, and hence eh & ex might change + * as part of the insert above. + */ + newdepth = ext_depth(inode); + /* + * update the extent length after successful insert of the + * split extent + */ + orig_ex.ee_len = cpu_to_le16(ee_len - + ext4_ext_get_actual_len(ex3)); + depth = newdepth; + ext4_ext_drop_refs(path); + path = ext4_ext_find_extent(inode, iblock, path); + if (IS_ERR(path)) { + err = PTR_ERR(path); + goto out; + } + eh = path[depth].p_hdr; + ex = path[depth].p_ext; + if (ex2 != &newex) + ex2 = ex; + + err = ext4_ext_get_access(handle, inode, path + depth); + if (err) + goto out; + + allocated = max_blocks; + } + /* + * If there was a change of depth as part of the + * insertion of ex3 above, we need to update the length + * of the ex1 extent again here + */ + if (ex1 && ex1 != ex) { + ex1 = ex; + ex1->ee_len = cpu_to_le16(iblock - ee_block); + ext4_ext_mark_uninitialized(ex1); + ex2 = &newex; + } + /* + * ex2: iblock to iblock + maxblocks-1 : to be direct IO written, + * uninitialised still. + */ + ex2->ee_block = cpu_to_le32(iblock); + ext4_ext_store_pblock(ex2, newblock); + ex2->ee_len = cpu_to_le16(allocated); + ext4_ext_mark_uninitialized(ex2); + if (ex2 != ex) + goto insert; + /* Mark modified extent as dirty */ + err = ext4_ext_dirty(handle, inode, path + depth); + ext_debug("out here\n"); + goto out; +insert: + err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); + if (err == -ENOSPC) { + err = ext4_ext_zeroout(inode, &orig_ex); + if (err) + goto fix_extent_len; + /* update the extent length and mark as initialized */ + ex->ee_block = orig_ex.ee_block; + ex->ee_len = orig_ex.ee_len; + ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); + ext4_ext_dirty(handle, inode, path + depth); + /* zero out the first half */ + return allocated; + } else if (err) + goto fix_extent_len; +out: + ext4_ext_show_leaf(inode, path); + return err ? err : allocated; + +fix_extent_len: + ex->ee_block = orig_ex.ee_block; + ex->ee_len = orig_ex.ee_len; + ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); + ext4_ext_mark_uninitialized(ex); + ext4_ext_dirty(handle, inode, path + depth); + return err; +} +static int ext4_convert_unwritten_extents_dio(handle_t *handle, + struct inode *inode, + struct ext4_ext_path *path) +{ + struct ext4_extent *ex; + struct ext4_extent_header *eh; + int depth; + int err = 0; + int ret = 0; + + depth = ext_depth(inode); + eh = path[depth].p_hdr; + ex = path[depth].p_ext; + + err = ext4_ext_get_access(handle, inode, path + depth); + if (err) + goto out; + /* first mark the extent as initialized */ + ext4_ext_mark_initialized(ex); + + /* + * We have to see if it can be merged with the extent + * on the left. + */ + if (ex > EXT_FIRST_EXTENT(eh)) { + /* + * To merge left, pass "ex - 1" to try_to_merge(), + * since it merges towards right _only_. + */ + ret = ext4_ext_try_to_merge(inode, path, ex - 1); + if (ret) { + err = ext4_ext_correct_indexes(handle, inode, path); + if (err) + goto out; + depth = ext_depth(inode); + ex--; + } + } + /* + * Try to Merge towards right. + */ + ret = ext4_ext_try_to_merge(inode, path, ex); + if (ret) { + err = ext4_ext_correct_indexes(handle, inode, path); + if (err) + goto out; + depth = ext_depth(inode); + } + /* Mark modified extent as dirty */ + err = ext4_ext_dirty(handle, inode, path + depth); +out: + ext4_ext_show_leaf(inode, path); + return err; +} + +static int +ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, + ext4_lblk_t iblock, unsigned int max_blocks, + struct ext4_ext_path *path, int flags, + unsigned int allocated, struct buffer_head *bh_result, + ext4_fsblk_t newblock) +{ + int ret = 0; + int err = 0; + ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio; + + ext_debug("ext4_ext_handle_uninitialized_extents: inode %lu, logical" + "block %llu, max_blocks %u, flags %d, allocated %u", + inode->i_ino, (unsigned long long)iblock, max_blocks, + flags, allocated); + ext4_ext_show_leaf(inode, path); + + /* DIO get_block() before submit the IO, split the extent */ + if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) { + ret = ext4_split_unwritten_extents(handle, + inode, path, iblock, + max_blocks, flags); + /* flag the io_end struct that we need convert when IO done */ + if (io) + io->flag = DIO_AIO_UNWRITTEN; + goto out; + } + /* DIO end_io complete, convert the filled extent to written */ + if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) { + ret = ext4_convert_unwritten_extents_dio(handle, inode, + path); + goto out2; + } + /* buffered IO case */ + /* + * repeat fallocate creation request + * we already have an unwritten extent + */ + if (flags & EXT4_GET_BLOCKS_UNINIT_EXT) + goto map_out; + + /* buffered READ or buffered write_begin() lookup */ + if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) { + /* + * We have blocks reserved already. We + * return allocated blocks so that delalloc + * won't do block reservation for us. But + * the buffer head will be unmapped so that + * a read from the block returns 0s. + */ + set_buffer_unwritten(bh_result); + goto out1; + } + + /* buffered write, writepage time, convert*/ + ret = ext4_ext_convert_to_initialized(handle, inode, + path, iblock, + max_blocks); +out: + if (ret <= 0) { + err = ret; + goto out2; + } else + allocated = ret; + set_buffer_new(bh_result); +map_out: + set_buffer_mapped(bh_result); +out1: + if (allocated > max_blocks) + allocated = max_blocks; + ext4_ext_show_leaf(inode, path); + bh_result->b_bdev = inode->i_sb->s_bdev; + bh_result->b_blocknr = newblock; +out2: + if (path) { + ext4_ext_drop_refs(path); + kfree(path); + } + return err ? err : allocated; +} +/* * Block allocation/map/preallocation routine for extents based files * * @@ -2814,6 +3136,7 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, int err = 0, depth, ret, cache_type; unsigned int allocated = 0; struct ext4_allocation_request ar; + ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio; __clear_bit(BH_New, &bh_result->b_state); ext_debug("blocks %u/%u requested for inode %lu\n", @@ -2889,33 +3212,10 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, EXT4_EXT_CACHE_EXTENT); goto out; } - if (flags & EXT4_GET_BLOCKS_UNINIT_EXT) - goto out; - if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) { - if (allocated > max_blocks) - allocated = max_blocks; - /* - * We have blocks reserved already. We - * return allocated blocks so that delalloc - * won't do block reservation for us. But - * the buffer head will be unmapped so that - * a read from the block returns 0s. - */ - set_buffer_unwritten(bh_result); - bh_result->b_bdev = inode->i_sb->s_bdev; - bh_result->b_blocknr = newblock; - goto out2; - } - - ret = ext4_ext_convert_to_initialized(handle, inode, - path, iblock, - max_blocks); - if (ret <= 0) { - err = ret; - goto out2; - } else - allocated = ret; - goto outnew; + ret = ext4_ext_handle_uninitialized_extents(handle, + inode, iblock, max_blocks, path, + flags, allocated, bh_result, newblock); + return ret; } } @@ -2986,9 +3286,21 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, /* try to insert new extent into found leaf and return */ ext4_ext_store_pblock(&newex, newblock); newex.ee_len = cpu_to_le16(ar.len); - if (flags & EXT4_GET_BLOCKS_UNINIT_EXT) /* Mark uninitialized */ + /* Mark uninitialized */ + if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){ ext4_ext_mark_uninitialized(&newex); - err = ext4_ext_insert_extent(handle, inode, path, &newex); + /* + * io_end structure was created for every async + * direct IO write to the middle of the file. + * To avoid unecessary convertion for every aio dio rewrite + * to the mid of file, here we flag the IO that is really + * need the convertion. + * + */ + if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) + io->flag = DIO_AIO_UNWRITTEN; + } + err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); if (err) { /* free data blocks we just allocated */ /* not a good idea to call discard here directly, @@ -3002,7 +3314,6 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, /* previous routine could use block we allocated */ newblock = ext_pblock(&newex); allocated = ext4_ext_get_actual_len(&newex); -outnew: set_buffer_new(bh_result); /* Cache only when it is _not_ an uninitialized extent */ @@ -3201,6 +3512,63 @@ retry: } /* + * This function convert a range of blocks to written extents + * The caller of this function will pass the start offset and the size. + * all unwritten extents within this range will be converted to + * written extents. + * + * This function is called from the direct IO end io call back + * function, to convert the fallocated extents after IO is completed. + */ +int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset, + loff_t len) +{ + handle_t *handle; + ext4_lblk_t block; + unsigned int max_blocks; + int ret = 0; + int ret2 = 0; + struct buffer_head map_bh; + unsigned int credits, blkbits = inode->i_blkbits; + + block = offset >> blkbits; + /* + * We can't just convert len to max_blocks because + * If blocksize = 4096 offset = 3072 and len = 2048 + */ + max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits) + - block; + /* + * credits to insert 1 extent into extent tree + */ + credits = ext4_chunk_trans_blocks(inode, max_blocks); + while (ret >= 0 && ret < max_blocks) { + block = block + ret; + max_blocks = max_blocks - ret; + handle = ext4_journal_start(inode, credits); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + break; + } + map_bh.b_state = 0; + ret = ext4_get_blocks(handle, inode, block, + max_blocks, &map_bh, + EXT4_GET_BLOCKS_DIO_CONVERT_EXT); + if (ret <= 0) { + WARN_ON(ret <= 0); + printk(KERN_ERR "%s: ext4_ext_get_blocks " + "returned error inode#%lu, block=%u, " + "max_blocks=%u", __func__, + inode->i_ino, block, max_blocks); + } + ext4_mark_inode_dirty(handle, inode); + ret2 = ext4_journal_stop(handle); + if (ret <= 0 || ret2 ) + break; + } + return ret > 0 ? ret2 : ret; +} +/* * Callback function called for each extent to gather FIEMAP information. */ static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path, diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c index 07475740b51..2b1531266ee 100644 --- a/fs/ext4/fsync.c +++ b/fs/ext4/fsync.c @@ -44,6 +44,8 @@ * * What we do is just kick off a commit and wait on it. This will snapshot the * inode to disk. + * + * i_mutex lock is held when entering and exiting this function */ int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync) @@ -56,6 +58,9 @@ int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync) trace_ext4_sync_file(file, dentry, datasync); + ret = flush_aio_dio_completed_IO(inode); + if (ret < 0) + goto out; /* * data=writeback: * The caller's filemap_fdatawrite()/wait will sync the data. diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 064746fad58..ec367bce721 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -37,6 +37,7 @@ #include <linux/namei.h> #include <linux/uio.h> #include <linux/bio.h> +#include <linux/workqueue.h> #include "ext4_jbd2.h" #include "xattr.h" @@ -1145,6 +1146,64 @@ static int check_block_validity(struct inode *inode, const char *msg, } /* + * Return the number of dirty pages in the given inode starting at + * page frame idx. + */ +static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx, + unsigned int max_pages) +{ + struct address_space *mapping = inode->i_mapping; + pgoff_t index; + struct pagevec pvec; + pgoff_t num = 0; + int i, nr_pages, done = 0; + + if (max_pages == 0) + return 0; + pagevec_init(&pvec, 0); + while (!done) { + index = idx; + nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, + PAGECACHE_TAG_DIRTY, + (pgoff_t)PAGEVEC_SIZE); + if (nr_pages == 0) + break; + for (i = 0; i < nr_pages; i++) { + struct page *page = pvec.pages[i]; + struct buffer_head *bh, *head; + + lock_page(page); + if (unlikely(page->mapping != mapping) || + !PageDirty(page) || + PageWriteback(page) || + page->index != idx) { + done = 1; + unlock_page(page); + break; + } + head = page_buffers(page); + bh = head; + do { + if (!buffer_delay(bh) && + !buffer_unwritten(bh)) { + done = 1; + break; + } + } while ((bh = bh->b_this_page) != head); + unlock_page(page); + if (done) + break; + idx++; + num++; + if (num >= max_pages) + break; + } + pagevec_release(&pvec); + } + return num; +} + +/* * The ext4_get_blocks() function tries to look up the requested blocks, * and returns if the blocks are already mapped. * @@ -1175,6 +1234,9 @@ int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, clear_buffer_mapped(bh); clear_buffer_unwritten(bh); + ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u," + "logical block %lu\n", inode->i_ino, flags, max_blocks, + (unsigned long)block); /* * Try to see if we can get the block without requesting a new * file system block. @@ -1796,11 +1858,11 @@ repeat: if (ext4_claim_free_blocks(sbi, total)) { spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + vfs_dq_release_reservation_block(inode, total); if (ext4_should_retry_alloc(inode->i_sb, &retries)) { yield(); goto repeat; } - vfs_dq_release_reservation_block(inode, total); return -ENOSPC; } EXT4_I(inode)->i_reserved_data_blocks += nrblocks; @@ -2092,18 +2154,18 @@ static void ext4_da_block_invalidatepages(struct mpage_da_data *mpd, static void ext4_print_free_blocks(struct inode *inode) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - printk(KERN_EMERG "Total free blocks count %lld\n", - ext4_count_free_blocks(inode->i_sb)); - printk(KERN_EMERG "Free/Dirty block details\n"); - printk(KERN_EMERG "free_blocks=%lld\n", - (long long)percpu_counter_sum(&sbi->s_freeblocks_counter)); - printk(KERN_EMERG "dirty_blocks=%lld\n", - (long long)percpu_counter_sum(&sbi->s_dirtyblocks_counter)); - printk(KERN_EMERG "Block reservation details\n"); - printk(KERN_EMERG "i_reserved_data_blocks=%u\n", - EXT4_I(inode)->i_reserved_data_blocks); - printk(KERN_EMERG "i_reserved_meta_blocks=%u\n", - EXT4_I(inode)->i_reserved_meta_blocks); + printk(KERN_CRIT "Total free blocks count %lld\n", + ext4_count_free_blocks(inode->i_sb)); + printk(KERN_CRIT "Free/Dirty block details\n"); + printk(KERN_CRIT "free_blocks=%lld\n", + (long long) percpu_counter_sum(&sbi->s_freeblocks_counter)); + printk(KERN_CRIT "dirty_blocks=%lld\n", + (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter)); + printk(KERN_CRIT "Block reservation details\n"); + printk(KERN_CRIT "i_reserved_data_blocks=%u\n", + EXT4_I(inode)->i_reserved_data_blocks); + printk(KERN_CRIT "i_reserved_meta_blocks=%u\n", + EXT4_I(inode)->i_reserved_meta_blocks); return; } @@ -2189,14 +2251,14 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd) * writepage and writepages will again try to write * the same. */ - printk(KERN_EMERG "%s block allocation failed for inode %lu " - "at logical offset %llu with max blocks " - "%zd with error %d\n", - __func__, mpd->inode->i_ino, - (unsigned long long)next, - mpd->b_size >> mpd->inode->i_blkbits, err); - printk(KERN_EMERG "This should not happen.!! " - "Data will be lost\n"); + ext4_msg(mpd->inode->i_sb, KERN_CRIT, + "delayed block allocation failed for inode %lu at " + "logical offset %llu with max blocks %zd with " + "error %d\n", mpd->inode->i_ino, + (unsigned long long) next, + mpd->b_size >> mpd->inode->i_blkbits, err); + printk(KERN_CRIT "This should not happen!! " + "Data will be lost\n"); if (err == -ENOSPC) { ext4_print_free_blocks(mpd->inode); } @@ -2743,8 +2805,10 @@ static int ext4_da_writepages(struct address_space *mapping, int no_nrwrite_index_update; int pages_written = 0; long pages_skipped; + unsigned int max_pages; int range_cyclic, cycled = 1, io_done = 0; - int needed_blocks, ret = 0, nr_to_writebump = 0; + int needed_blocks, ret = 0; + long desired_nr_to_write, nr_to_writebump = 0; loff_t range_start = wbc->range_start; struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb); @@ -2771,16 +2835,6 @@ static int ext4_da_writepages(struct address_space *mapping, if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED)) return -EROFS; - /* - * Make sure nr_to_write is >= sbi->s_mb_stream_request - * This make sure small files blocks are allocated in - * single attempt. This ensure that small files - * get less fragmented. - */ - if (wbc->nr_to_write < sbi->s_mb_stream_request) { - nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write; - wbc->nr_to_write = sbi->s_mb_stream_request; - } if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) range_whole = 1; @@ -2795,6 +2849,36 @@ static int ext4_da_writepages(struct address_space *mapping, } else index = wbc->range_start >> PAGE_CACHE_SHIFT; + /* + * This works around two forms of stupidity. The first is in + * the writeback code, which caps the maximum number of pages + * written to be 1024 pages. This is wrong on multiple + * levels; different architectues have a different page size, + * which changes the maximum amount of data which gets + * written. Secondly, 4 megabytes is way too small. XFS + * forces this value to be 16 megabytes by multiplying + * nr_to_write parameter by four, and then relies on its + * allocator to allocate larger extents to make them + * contiguous. Unfortunately this brings us to the second + * stupidity, which is that ext4's mballoc code only allocates + * at most 2048 blocks. So we force contiguous writes up to + * the number of dirty blocks in the inode, or + * sbi->max_writeback_mb_bump whichever is smaller. + */ + max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT); + if (!range_cyclic && range_whole) + desired_nr_to_write = wbc->nr_to_write * 8; + else + desired_nr_to_write = ext4_num_dirty_pages(inode, index, + max_pages); + if (desired_nr_to_write > max_pages) + desired_nr_to_write = max_pages; + + if (wbc->nr_to_write < desired_nr_to_write) { + nr_to_writebump = desired_nr_to_write - wbc->nr_to_write; + wbc->nr_to_write = desired_nr_to_write; + } + mpd.wbc = wbc; mpd.inode = mapping->host; @@ -2822,10 +2906,9 @@ retry: handle = ext4_journal_start(inode, needed_blocks); if (IS_ERR(handle)) { ret = PTR_ERR(handle); - printk(KERN_CRIT "%s: jbd2_start: " + ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " "%ld pages, ino %lu; err %d\n", __func__, wbc->nr_to_write, inode->i_ino, ret); - dump_stack(); goto out_writepages; } @@ -2897,9 +2980,10 @@ retry: goto retry; } if (pages_skipped != wbc->pages_skipped) - printk(KERN_EMERG "This should not happen leaving %s " - "with nr_to_write = %ld ret = %d\n", - __func__, wbc->nr_to_write, ret); + ext4_msg(inode->i_sb, KERN_CRIT, + "This should not happen leaving %s " + "with nr_to_write = %ld ret = %d\n", + __func__, wbc->nr_to_write, ret); /* Update index */ index += pages_written; @@ -2914,7 +2998,8 @@ retry: out_writepages: if (!no_nrwrite_index_update) wbc->no_nrwrite_index_update = 0; - wbc->nr_to_write -= nr_to_writebump; + if (wbc->nr_to_write > nr_to_writebump) + wbc->nr_to_write -= nr_to_writebump; wbc->range_start = range_start; trace_ext4_da_writepages_result(inode, wbc, ret, pages_written); return ret; @@ -3272,6 +3357,8 @@ static int ext4_releasepage(struct page *page, gfp_t wait) } /* + * O_DIRECT for ext3 (or indirect map) based files + * * If the O_DIRECT write will extend the file then add this inode to the * orphan list. So recovery will truncate it back to the original size * if the machine crashes during the write. @@ -3280,7 +3367,7 @@ static int ext4_releasepage(struct page *page, gfp_t wait) * crashes then stale disk data _may_ be exposed inside the file. But current * VFS code falls back into buffered path in that case so we are safe. */ -static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, +static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) { @@ -3354,6 +3441,359 @@ out: return ret; } +/* Maximum number of blocks we map for direct IO at once. */ + +static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create) +{ + handle_t *handle = NULL; + int ret = 0; + unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; + int dio_credits; + + ext4_debug("ext4_get_block_dio_write: inode %lu, create flag %d\n", + inode->i_ino, create); + /* + * DIO VFS code passes create = 0 flag for write to + * the middle of file. It does this to avoid block + * allocation for holes, to prevent expose stale data + * out when there is parallel buffered read (which does + * not hold the i_mutex lock) while direct IO write has + * not completed. DIO request on holes finally falls back + * to buffered IO for this reason. + * + * For ext4 extent based file, since we support fallocate, + * new allocated extent as uninitialized, for holes, we + * could fallocate blocks for holes, thus parallel + * buffered IO read will zero out the page when read on + * a hole while parallel DIO write to the hole has not completed. + * + * when we come here, we know it's a direct IO write to + * to the middle of file (<i_size) + * so it's safe to override the create flag from VFS. + */ + create = EXT4_GET_BLOCKS_DIO_CREATE_EXT; + + if (max_blocks > DIO_MAX_BLOCKS) + max_blocks = DIO_MAX_BLOCKS; + dio_credits = ext4_chunk_trans_blocks(inode, max_blocks); + handle = ext4_journal_start(inode, dio_credits); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + goto out; + } + ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result, + create); + if (ret > 0) { + bh_result->b_size = (ret << inode->i_blkbits); + ret = 0; + } + ext4_journal_stop(handle); +out: + return ret; +} + +static void ext4_free_io_end(ext4_io_end_t *io) +{ + BUG_ON(!io); + iput(io->inode); + kfree(io); +} +static void dump_aio_dio_list(struct inode * inode) +{ +#ifdef EXT4_DEBUG + struct list_head *cur, *before, *after; + ext4_io_end_t *io, *io0, *io1; + + if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){ + ext4_debug("inode %lu aio dio list is empty\n", inode->i_ino); + return; + } + + ext4_debug("Dump inode %lu aio_dio_completed_IO list \n", inode->i_ino); + list_for_each_entry(io, &EXT4_I(inode)->i_aio_dio_complete_list, list){ + cur = &io->list; + before = cur->prev; + io0 = container_of(before, ext4_io_end_t, list); + after = cur->next; + io1 = container_of(after, ext4_io_end_t, list); + + ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n", + io, inode->i_ino, io0, io1); + } +#endif +} + +/* + * check a range of space and convert unwritten extents to written. + */ +static int ext4_end_aio_dio_nolock(ext4_io_end_t *io) +{ + struct inode *inode = io->inode; + loff_t offset = io->offset; + size_t size = io->size; + int ret = 0; + + ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p," + "list->prev 0x%p\n", + io, inode->i_ino, io->list.next, io->list.prev); + + if (list_empty(&io->list)) + return ret; + + if (io->flag != DIO_AIO_UNWRITTEN) + return ret; + + if (offset + size <= i_size_read(inode)) + ret = ext4_convert_unwritten_extents(inode, offset, size); + + if (ret < 0) { + printk(KERN_EMERG "%s: failed to convert unwritten" + "extents to written extents, error is %d" + " io is still on inode %lu aio dio list\n", + __func__, ret, inode->i_ino); + return ret; + } + + /* clear the DIO AIO unwritten flag */ + io->flag = 0; + return ret; +} +/* + * work on completed aio dio IO, to convert unwritten extents to extents + */ +static void ext4_end_aio_dio_work(struct work_struct *work) +{ + ext4_io_end_t *io = container_of(work, ext4_io_end_t, work); + struct inode *inode = io->inode; + int ret = 0; + + mutex_lock(&inode->i_mutex); + ret = ext4_end_aio_dio_nolock(io); + if (ret >= 0) { + if (!list_empty(&io->list)) + list_del_init(&io->list); + ext4_free_io_end(io); + } + mutex_unlock(&inode->i_mutex); +} +/* + * This function is called from ext4_sync_file(). + * + * When AIO DIO IO is completed, the work to convert unwritten + * extents to written is queued on workqueue but may not get immediately + * scheduled. When fsync is called, we need to ensure the + * conversion is complete before fsync returns. + * The inode keeps track of a list of completed AIO from DIO path + * that might needs to do the conversion. This function walks through + * the list and convert the related unwritten extents to written. + */ +int flush_aio_dio_completed_IO(struct inode *inode) +{ + ext4_io_end_t *io; + int ret = 0; + int ret2 = 0; + + if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)) + return ret; + + dump_aio_dio_list(inode); + while (!list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){ + io = list_entry(EXT4_I(inode)->i_aio_dio_complete_list.next, + ext4_io_end_t, list); + /* + * Calling ext4_end_aio_dio_nolock() to convert completed + * IO to written. + * + * When ext4_sync_file() is called, run_queue() may already + * about to flush the work corresponding to this io structure. + * It will be upset if it founds the io structure related + * to the work-to-be schedule is freed. + * + * Thus we need to keep the io structure still valid here after + * convertion finished. The io structure has a flag to + * avoid double converting from both fsync and background work + * queue work. + */ + ret = ext4_end_aio_dio_nolock(io); + if (ret < 0) + ret2 = ret; + else + list_del_init(&io->list); + } + return (ret2 < 0) ? ret2 : 0; +} + +static ext4_io_end_t *ext4_init_io_end (struct inode *inode) +{ + ext4_io_end_t *io = NULL; + + io = kmalloc(sizeof(*io), GFP_NOFS); + + if (io) { + igrab(inode); + io->inode = inode; + io->flag = 0; + io->offset = 0; + io->size = 0; + io->error = 0; + INIT_WORK(&io->work, ext4_end_aio_dio_work); + INIT_LIST_HEAD(&io->list); + } + + return io; +} + +static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, + ssize_t size, void *private) +{ + ext4_io_end_t *io_end = iocb->private; + struct workqueue_struct *wq; + + ext_debug("ext4_end_io_dio(): io_end 0x%p" + "for inode %lu, iocb 0x%p, offset %llu, size %llu\n", + iocb->private, io_end->inode->i_ino, iocb, offset, + size); + /* if not async direct IO or dio with 0 bytes write, just return */ + if (!io_end || !size) + return; + + /* if not aio dio with unwritten extents, just free io and return */ + if (io_end->flag != DIO_AIO_UNWRITTEN){ + ext4_free_io_end(io_end); + iocb->private = NULL; + return; + } + + io_end->offset = offset; + io_end->size = size; + wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq; + + /* queue the work to convert unwritten extents to written */ + queue_work(wq, &io_end->work); + + /* Add the io_end to per-inode completed aio dio list*/ + list_add_tail(&io_end->list, + &EXT4_I(io_end->inode)->i_aio_dio_complete_list); + iocb->private = NULL; +} +/* + * For ext4 extent files, ext4 will do direct-io write to holes, + * preallocated extents, and those write extend the file, no need to + * fall back to buffered IO. + * + * For holes, we fallocate those blocks, mark them as unintialized + * If those blocks were preallocated, we mark sure they are splited, but + * still keep the range to write as unintialized. + * + * The unwrritten extents will be converted to written when DIO is completed. + * For async direct IO, since the IO may still pending when return, we + * set up an end_io call back function, which will do the convertion + * when async direct IO completed. + * + * If the O_DIRECT write will extend the file then add this inode to the + * orphan list. So recovery will truncate it back to the original size + * if the machine crashes during the write. + * + */ +static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, + const struct iovec *iov, loff_t offset, + unsigned long nr_segs) +{ + struct file *file = iocb->ki_filp; + struct inode *inode = file->f_mapping->host; + ssize_t ret; + size_t count = iov_length(iov, nr_segs); + + loff_t final_size = offset + count; + if (rw == WRITE && final_size <= inode->i_size) { + /* + * We could direct write to holes and fallocate. + * + * Allocated blocks to fill the hole are marked as uninitialized + * to prevent paralel buffered read to expose the stale data + * before DIO complete the data IO. + * + * As to previously fallocated extents, ext4 get_block + * will just simply mark the buffer mapped but still + * keep the extents uninitialized. + * + * for non AIO case, we will convert those unwritten extents + * to written after return back from blockdev_direct_IO. + * + * for async DIO, the conversion needs to be defered when + * the IO is completed. The ext4 end_io callback function + * will be called to take care of the conversion work. + * Here for async case, we allocate an io_end structure to + * hook to the iocb. + */ + iocb->private = NULL; + EXT4_I(inode)->cur_aio_dio = NULL; + if (!is_sync_kiocb(iocb)) { + iocb->private = ext4_init_io_end(inode); + if (!iocb->private) + return -ENOMEM; + /* + * we save the io structure for current async + * direct IO, so that later ext4_get_blocks() + * could flag the io structure whether there + * is a unwritten extents needs to be converted + * when IO is completed. + */ + EXT4_I(inode)->cur_aio_dio = iocb->private; + } + + ret = blockdev_direct_IO(rw, iocb, inode, + inode->i_sb->s_bdev, iov, + offset, nr_segs, + ext4_get_block_dio_write, + ext4_end_io_dio); + if (iocb->private) + EXT4_I(inode)->cur_aio_dio = NULL; + /* + * The io_end structure takes a reference to the inode, + * that structure needs to be destroyed and the + * reference to the inode need to be dropped, when IO is + * complete, even with 0 byte write, or failed. + * + * In the successful AIO DIO case, the io_end structure will be + * desctroyed and the reference to the inode will be dropped + * after the end_io call back function is called. + * + * In the case there is 0 byte write, or error case, since + * VFS direct IO won't invoke the end_io call back function, + * we need to free the end_io structure here. + */ + if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { + ext4_free_io_end(iocb->private); + iocb->private = NULL; + } else if (ret > 0) + /* + * for non AIO case, since the IO is already + * completed, we could do the convertion right here + */ + ret = ext4_convert_unwritten_extents(inode, + offset, ret); + return ret; + } + + /* for write the the end of file case, we fall back to old way */ + return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); +} + +static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, + const struct iovec *iov, loff_t offset, + unsigned long nr_segs) +{ + struct file *file = iocb->ki_filp; + struct inode *inode = file->f_mapping->host; + + if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) + return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs); + + return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); +} + /* * Pages can be marked dirty completely asynchronously from ext4's journalling * activity. By filemap_sync_pte(), try_to_unmap_one(), etc. We cannot do @@ -4551,8 +4991,7 @@ static int ext4_inode_blocks_set(handle_t *handle, */ static int ext4_do_update_inode(handle_t *handle, struct inode *inode, - struct ext4_iloc *iloc, - int do_sync) + struct ext4_iloc *iloc) { struct ext4_inode *raw_inode = ext4_raw_inode(iloc); struct ext4_inode_info *ei = EXT4_I(inode); @@ -4653,22 +5092,10 @@ static int ext4_do_update_inode(handle_t *handle, raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); } - /* - * If we're not using a journal and we were called from - * ext4_write_inode() to sync the inode (making do_sync true), - * we can just use sync_dirty_buffer() directly to do our dirty - * work. Testing s_journal here is a bit redundant but it's - * worth it to avoid potential future trouble. - */ - if (EXT4_SB(inode->i_sb)->s_journal == NULL && do_sync) { - BUFFER_TRACE(bh, "call sync_dirty_buffer"); - sync_dirty_buffer(bh); - } else { - BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); - rc = ext4_handle_dirty_metadata(handle, inode, bh); - if (!err) - err = rc; - } + BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); + rc = ext4_handle_dirty_metadata(handle, inode, bh); + if (!err) + err = rc; ei->i_state &= ~EXT4_STATE_NEW; out_brelse: @@ -4736,8 +5163,16 @@ int ext4_write_inode(struct inode *inode, int wait) err = ext4_get_inode_loc(inode, &iloc); if (err) return err; - err = ext4_do_update_inode(EXT4_NOJOURNAL_HANDLE, - inode, &iloc, wait); + if (wait) + sync_dirty_buffer(iloc.bh); + if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) { + ext4_error(inode->i_sb, __func__, + "IO error syncing inode, " + "inode=%lu, block=%llu", + inode->i_ino, + (unsigned long long)iloc.bh->b_blocknr); + err = -EIO; + } } return err; } @@ -5033,7 +5468,7 @@ int ext4_mark_iloc_dirty(handle_t *handle, get_bh(iloc->bh); /* ext4_do_update_inode() does jbd2_journal_dirty_metadata */ - err = ext4_do_update_inode(handle, inode, iloc, 0); + err = ext4_do_update_inode(handle, inode, iloc); put_bh(iloc->bh); return err; } @@ -5180,24 +5615,13 @@ void ext4_dirty_inode(struct inode *inode) handle_t *current_handle = ext4_journal_current_handle(); handle_t *handle; - if (!ext4_handle_valid(current_handle)) { - ext4_mark_inode_dirty(current_handle, inode); - return; - } - handle = ext4_journal_start(inode, 2); if (IS_ERR(handle)) goto out; - if (current_handle && - current_handle->h_transaction != handle->h_transaction) { - /* This task has a transaction open against a different fs */ - printk(KERN_EMERG "%s: transactions do not match!\n", - __func__); - } else { - jbd_debug(5, "marking dirty. outer handle=%p\n", - current_handle); - ext4_mark_inode_dirty(handle, inode); - } + + jbd_debug(5, "marking dirty. outer handle=%p\n", current_handle); + ext4_mark_inode_dirty(handle, inode); + ext4_journal_stop(handle); out: return; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index e9c61896d60..bba12824def 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2096,207 +2096,6 @@ out: return err; } -#ifdef EXT4_MB_HISTORY -struct ext4_mb_proc_session { - struct ext4_mb_history *history; - struct super_block *sb; - int start; - int max; -}; - -static void *ext4_mb_history_skip_empty(struct ext4_mb_proc_session *s, - struct ext4_mb_history *hs, - int first) -{ - if (hs == s->history + s->max) - hs = s->history; - if (!first && hs == s->history + s->start) - return NULL; - while (hs->orig.fe_len == 0) { - hs++; - if (hs == s->history + s->max) - hs = s->history; - if (hs == s->history + s->start) - return NULL; - } - return hs; -} - -static void *ext4_mb_seq_history_start(struct seq_file *seq, loff_t *pos) -{ - struct ext4_mb_proc_session *s = seq->private; - struct ext4_mb_history *hs; - int l = *pos; - - if (l == 0) - return SEQ_START_TOKEN; - hs = ext4_mb_history_skip_empty(s, s->history + s->start, 1); - if (!hs) - return NULL; - while (--l && (hs = ext4_mb_history_skip_empty(s, ++hs, 0)) != NULL); - return hs; -} - -static void *ext4_mb_seq_history_next(struct seq_file *seq, void *v, - loff_t *pos) -{ - struct ext4_mb_proc_session *s = seq->private; - struct ext4_mb_history *hs = v; - - ++*pos; - if (v == SEQ_START_TOKEN) - return ext4_mb_history_skip_empty(s, s->history + s->start, 1); - else - return ext4_mb_history_skip_empty(s, ++hs, 0); -} - -static int ext4_mb_seq_history_show(struct seq_file *seq, void *v) -{ - char buf[25], buf2[25], buf3[25], *fmt; - struct ext4_mb_history *hs = v; - - if (v == SEQ_START_TOKEN) { - seq_printf(seq, "%-5s %-8s %-23s %-23s %-23s %-5s " - "%-5s %-2s %-6s %-5s %-5s %-6s\n", - "pid", "inode", "original", "goal", "result", "found", - "grps", "cr", "flags", "merge", "tail", "broken"); - return 0; - } - - if (hs->op == EXT4_MB_HISTORY_ALLOC) { - fmt = "%-5u %-8u %-23s %-23s %-23s %-5u %-5u %-2u " - "0x%04x %-5s %-5u %-6u\n"; - sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group, - hs->result.fe_start, hs->result.fe_len, - hs->result.fe_logical); - sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group, - hs->orig.fe_start, hs->orig.fe_len, - hs->orig.fe_logical); - sprintf(buf3, "%u/%d/%u@%u", hs->goal.fe_group, - hs->goal.fe_start, hs->goal.fe_len, - hs->goal.fe_logical); - seq_printf(seq, fmt, hs->pid, hs->ino, buf, buf3, buf2, - hs->found, hs->groups, hs->cr, hs->flags, - hs->merged ? "M" : "", hs->tail, - hs->buddy ? 1 << hs->buddy : 0); - } else if (hs->op == EXT4_MB_HISTORY_PREALLOC) { - fmt = "%-5u %-8u %-23s %-23s %-23s\n"; - sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group, - hs->result.fe_start, hs->result.fe_len, - hs->result.fe_logical); - sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group, - hs->orig.fe_start, hs->orig.fe_len, - hs->orig.fe_logical); - seq_printf(seq, fmt, hs->pid, hs->ino, buf, "", buf2); - } else if (hs->op == EXT4_MB_HISTORY_DISCARD) { - sprintf(buf2, "%u/%d/%u", hs->result.fe_group, - hs->result.fe_start, hs->result.fe_len); - seq_printf(seq, "%-5u %-8u %-23s discard\n", - hs->pid, hs->ino, buf2); - } else if (hs->op == EXT4_MB_HISTORY_FREE) { - sprintf(buf2, "%u/%d/%u", hs->result.fe_group, - hs->result.fe_start, hs->result.fe_len); - seq_printf(seq, "%-5u %-8u %-23s free\n", - hs->pid, hs->ino, buf2); - } - return 0; -} - -static void ext4_mb_seq_history_stop(struct seq_file *seq, void *v) -{ -} - -static const struct seq_operations ext4_mb_seq_history_ops = { - .start = ext4_mb_seq_history_start, - .next = ext4_mb_seq_history_next, - .stop = ext4_mb_seq_history_stop, - .show = ext4_mb_seq_history_show, -}; - -static int ext4_mb_seq_history_open(struct inode *inode, struct file *file) -{ - struct super_block *sb = PDE(inode)->data; - struct ext4_sb_info *sbi = EXT4_SB(sb); - struct ext4_mb_proc_session *s; - int rc; - int size; - - if (unlikely(sbi->s_mb_history == NULL)) - return -ENOMEM; - s = kmalloc(sizeof(*s), GFP_KERNEL); - if (s == NULL) - return -ENOMEM; - s->sb = sb; - size = sizeof(struct ext4_mb_history) * sbi->s_mb_history_max; - s->history = kmalloc(size, GFP_KERNEL); - if (s->history == NULL) { - kfree(s); - return -ENOMEM; - } - - spin_lock(&sbi->s_mb_history_lock); - memcpy(s->history, sbi->s_mb_history, size); - s->max = sbi->s_mb_history_max; - s->start = sbi->s_mb_history_cur % s->max; - spin_unlock(&sbi->s_mb_history_lock); - - rc = seq_open(file, &ext4_mb_seq_history_ops); - if (rc == 0) { - struct seq_file *m = (struct seq_file *)file->private_data; - m->private = s; - } else { - kfree(s->history); - kfree(s); - } - return rc; - -} - -static int ext4_mb_seq_history_release(struct inode *inode, struct file *file) -{ - struct seq_file *seq = (struct seq_file *)file->private_data; - struct ext4_mb_proc_session *s = seq->private; - kfree(s->history); - kfree(s); - return seq_release(inode, file); -} - -static ssize_t ext4_mb_seq_history_write(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct seq_file *seq = (struct seq_file *)file->private_data; - struct ext4_mb_proc_session *s = seq->private; - struct super_block *sb = s->sb; - char str[32]; - int value; - - if (count >= sizeof(str)) { - printk(KERN_ERR "EXT4-fs: %s string too long, max %u bytes\n", - "mb_history", (int)sizeof(str)); - return -EOVERFLOW; - } - - if (copy_from_user(str, buffer, count)) - return -EFAULT; - - value = simple_strtol(str, NULL, 0); - if (value < 0) - return -ERANGE; - EXT4_SB(sb)->s_mb_history_filter = value; - - return count; -} - -static const struct file_operations ext4_mb_seq_history_fops = { - .owner = THIS_MODULE, - .open = ext4_mb_seq_history_open, - .read = seq_read, - .write = ext4_mb_seq_history_write, - .llseek = seq_lseek, - .release = ext4_mb_seq_history_release, -}; - static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos) { struct super_block *sb = seq->private; @@ -2396,82 +2195,6 @@ static const struct file_operations ext4_mb_seq_groups_fops = { .release = seq_release, }; -static void ext4_mb_history_release(struct super_block *sb) -{ - struct ext4_sb_info *sbi = EXT4_SB(sb); - - if (sbi->s_proc != NULL) { - remove_proc_entry("mb_groups", sbi->s_proc); - if (sbi->s_mb_history_max) - remove_proc_entry("mb_history", sbi->s_proc); - } - kfree(sbi->s_mb_history); -} - -static void ext4_mb_history_init(struct super_block *sb) -{ - struct ext4_sb_info *sbi = EXT4_SB(sb); - int i; - - if (sbi->s_proc != NULL) { - if (sbi->s_mb_history_max) - proc_create_data("mb_history", S_IRUGO, sbi->s_proc, - &ext4_mb_seq_history_fops, sb); - proc_create_data("mb_groups", S_IRUGO, sbi->s_proc, - &ext4_mb_seq_groups_fops, sb); - } - - sbi->s_mb_history_cur = 0; - spin_lock_init(&sbi->s_mb_history_lock); - i = sbi->s_mb_history_max * sizeof(struct ext4_mb_history); - sbi->s_mb_history = i ? kzalloc(i, GFP_KERNEL) : NULL; - /* if we can't allocate history, then we simple won't use it */ -} - -static noinline_for_stack void -ext4_mb_store_history(struct ext4_allocation_context *ac) -{ - struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb); - struct ext4_mb_history h; - - if (sbi->s_mb_history == NULL) - return; - - if (!(ac->ac_op & sbi->s_mb_history_filter)) - return; - - h.op = ac->ac_op; - h.pid = current->pid; - h.ino = ac->ac_inode ? ac->ac_inode->i_ino : 0; - h.orig = ac->ac_o_ex; - h.result = ac->ac_b_ex; - h.flags = ac->ac_flags; - h.found = ac->ac_found; - h.groups = ac->ac_groups_scanned; - h.cr = ac->ac_criteria; - h.tail = ac->ac_tail; - h.buddy = ac->ac_buddy; - h.merged = 0; - if (ac->ac_op == EXT4_MB_HISTORY_ALLOC) { - if (ac->ac_g_ex.fe_start == ac->ac_b_ex.fe_start && - ac->ac_g_ex.fe_group == ac->ac_b_ex.fe_group) - h.merged = 1; - h.goal = ac->ac_g_ex; - h.result = ac->ac_f_ex; - } - - spin_lock(&sbi->s_mb_history_lock); - memcpy(sbi->s_mb_history + sbi->s_mb_history_cur, &h, sizeof(h)); - if (++sbi->s_mb_history_cur >= sbi->s_mb_history_max) - sbi->s_mb_history_cur = 0; - spin_unlock(&sbi->s_mb_history_lock); -} - -#else -#define ext4_mb_history_release(sb) -#define ext4_mb_history_init(sb) -#endif - /* Create and initialize ext4_group_info data for the given group. */ int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group, @@ -2690,7 +2413,6 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) sbi->s_mb_stats = MB_DEFAULT_STATS; sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD; sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS; - sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT; sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC; sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group); @@ -2708,12 +2430,12 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) spin_lock_init(&lg->lg_prealloc_lock); } - ext4_mb_history_init(sb); + if (sbi->s_proc) + proc_create_data("mb_groups", S_IRUGO, sbi->s_proc, + &ext4_mb_seq_groups_fops, sb); if (sbi->s_journal) sbi->s_journal->j_commit_callback = release_blocks_on_commit; - - printk(KERN_INFO "EXT4-fs: mballoc enabled\n"); return 0; } @@ -2790,7 +2512,8 @@ int ext4_mb_release(struct super_block *sb) } free_percpu(sbi->s_locality_groups); - ext4_mb_history_release(sb); + if (sbi->s_proc) + remove_proc_entry("mb_groups", sbi->s_proc); return 0; } @@ -3276,7 +2999,10 @@ static void ext4_mb_collect_stats(struct ext4_allocation_context *ac) atomic_inc(&sbi->s_bal_breaks); } - ext4_mb_store_history(ac); + if (ac->ac_op == EXT4_MB_HISTORY_ALLOC) + trace_ext4_mballoc_alloc(ac); + else + trace_ext4_mballoc_prealloc(ac); } /* @@ -3776,7 +3502,6 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh, if (ac) { ac->ac_sb = sb; ac->ac_inode = pa->pa_inode; - ac->ac_op = EXT4_MB_HISTORY_DISCARD; } while (bit < end) { @@ -3796,7 +3521,7 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh, ac->ac_b_ex.fe_start = bit; ac->ac_b_ex.fe_len = next - bit; ac->ac_b_ex.fe_logical = 0; - ext4_mb_store_history(ac); + trace_ext4_mballoc_discard(ac); } trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit, @@ -3831,9 +3556,6 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b, ext4_group_t group; ext4_grpblk_t bit; - if (ac) - ac->ac_op = EXT4_MB_HISTORY_DISCARD; - trace_ext4_mb_release_group_pa(ac, pa); BUG_ON(pa->pa_deleted == 0); ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit); @@ -3848,7 +3570,7 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b, ac->ac_b_ex.fe_start = bit; ac->ac_b_ex.fe_len = pa->pa_len; ac->ac_b_ex.fe_logical = 0; - ext4_mb_store_history(ac); + trace_ext4_mballoc_discard(ac); } return 0; @@ -4189,7 +3911,6 @@ static void ext4_mb_group_or_file(struct ext4_allocation_context *ac) size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len; isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1) >> bsbits; - size = max(size, isize); if ((size == isize) && !ext4_fs_is_busy(sbi) && @@ -4199,6 +3920,7 @@ static void ext4_mb_group_or_file(struct ext4_allocation_context *ac) } /* don't use group allocation for large files */ + size = max(size, isize); if (size >= sbi->s_mb_stream_request) { ac->ac_flags |= EXT4_MB_STREAM_ALLOC; return; @@ -4739,7 +4461,6 @@ void ext4_mb_free_blocks(handle_t *handle, struct inode *inode, ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS); if (ac) { - ac->ac_op = EXT4_MB_HISTORY_FREE; ac->ac_inode = inode; ac->ac_sb = sb; } @@ -4806,7 +4527,7 @@ do_more: ac->ac_b_ex.fe_group = block_group; ac->ac_b_ex.fe_start = bit; ac->ac_b_ex.fe_len = count; - ext4_mb_store_history(ac); + trace_ext4_mballoc_free(ac); } err = ext4_mb_load_buddy(sb, block_group, &e4b); diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index 188d3d709b2..0ca811061bc 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -52,18 +52,8 @@ extern u8 mb_enable_debug; #define mb_debug(n, fmt, a...) #endif -/* - * with EXT4_MB_HISTORY mballoc stores last N allocations in memory - * and you can monitor it in /proc/fs/ext4/<dev>/mb_history - */ -#define EXT4_MB_HISTORY #define EXT4_MB_HISTORY_ALLOC 1 /* allocation */ #define EXT4_MB_HISTORY_PREALLOC 2 /* preallocated blocks used */ -#define EXT4_MB_HISTORY_DISCARD 4 /* preallocation discarded */ -#define EXT4_MB_HISTORY_FREE 8 /* free */ - -#define EXT4_MB_HISTORY_DEFAULT (EXT4_MB_HISTORY_ALLOC | \ - EXT4_MB_HISTORY_PREALLOC) /* * How long mballoc can look for a best extent (in found extents) @@ -84,7 +74,7 @@ extern u8 mb_enable_debug; * with 'ext4_mb_stats' allocator will collect stats that will be * shown at umount. The collecting costs though! */ -#define MB_DEFAULT_STATS 1 +#define MB_DEFAULT_STATS 0 /* * files smaller than MB_DEFAULT_STREAM_THRESHOLD are served @@ -217,22 +207,6 @@ struct ext4_allocation_context { #define AC_STATUS_FOUND 2 #define AC_STATUS_BREAK 3 -struct ext4_mb_history { - struct ext4_free_extent orig; /* orig allocation */ - struct ext4_free_extent goal; /* goal allocation */ - struct ext4_free_extent result; /* result allocation */ - unsigned pid; - unsigned ino; - __u16 found; /* how many extents have been found */ - __u16 groups; /* how many groups have been scanned */ - __u16 tail; /* what tail broke some buddy */ - __u16 buddy; /* buddy the tail ^^^ broke */ - __u16 flags; - __u8 cr:3; /* which phase the result extent was found at */ - __u8 op:4; - __u8 merged:1; -}; - struct ext4_buddy { struct page *bd_buddy_page; void *bd_buddy; @@ -247,13 +221,6 @@ struct ext4_buddy { #define EXT4_MB_BITMAP(e4b) ((e4b)->bd_bitmap) #define EXT4_MB_BUDDY(e4b) ((e4b)->bd_buddy) -#ifndef EXT4_MB_HISTORY -static inline void ext4_mb_store_history(struct ext4_allocation_context *ac) -{ - return; -} -#endif - #define in_range(b, first, len) ((b) >= (first) && (b) <= (first) + (len) - 1) static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb, diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c index bf519f239ae..a93d5b80f3e 100644 --- a/fs/ext4/migrate.c +++ b/fs/ext4/migrate.c @@ -75,7 +75,7 @@ static int finish_range(handle_t *handle, struct inode *inode, goto err_out; } } - retval = ext4_ext_insert_extent(handle, inode, path, &newext); + retval = ext4_ext_insert_extent(handle, inode, path, &newext, 0); err_out: if (path) { ext4_ext_drop_refs(path); diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c index c07a2915e40..25b6b145736 100644 --- a/fs/ext4/move_extent.c +++ b/fs/ext4/move_extent.c @@ -322,7 +322,7 @@ mext_insert_across_blocks(handle_t *handle, struct inode *orig_inode, goto out; if (ext4_ext_insert_extent(handle, orig_inode, - orig_path, new_ext)) + orig_path, new_ext, 0)) goto out; } @@ -333,7 +333,7 @@ mext_insert_across_blocks(handle_t *handle, struct inode *orig_inode, goto out; if (ext4_ext_insert_extent(handle, orig_inode, - orig_path, end_ext)) + orig_path, end_ext, 0)) goto out; } out: @@ -1001,14 +1001,6 @@ mext_check_arguments(struct inode *orig_inode, return -EINVAL; } - /* orig and donor should be different file */ - if (orig_inode->i_ino == donor_inode->i_ino) { - ext4_debug("ext4 move extent: The argument files should not " - "be same file [ino:orig %lu, donor %lu]\n", - orig_inode->i_ino, donor_inode->i_ino); - return -EINVAL; - } - /* Ext4 move extent supports only extent based file */ if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) { ext4_debug("ext4 move extent: orig file is not extents " @@ -1232,6 +1224,14 @@ ext4_move_extents(struct file *o_filp, struct file *d_filp, int block_len_in_page; int uninit; + /* orig and donor should be different file */ + if (orig_inode->i_ino == donor_inode->i_ino) { + ext4_debug("ext4 move extent: The argument files should not " + "be same file [ino:orig %lu, donor %lu]\n", + orig_inode->i_ino, donor_inode->i_ino); + return -EINVAL; + } + /* protect orig and donor against a truncate */ ret1 = mext_inode_double_lock(orig_inode, donor_inode); if (ret1 < 0) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 42f81d285cd..7c8fe80bacd 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2076,7 +2076,8 @@ int ext4_orphan_del(handle_t *handle, struct inode *inode) struct ext4_iloc iloc; int err = 0; - if (!ext4_handle_valid(handle)) + /* ext4_handle_valid() assumes a valid handle_t pointer */ + if (handle && !ext4_handle_valid(handle)) return 0; mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index df539ba2777..12e726a7073 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -50,13 +50,6 @@ #define CREATE_TRACE_POINTS #include <trace/events/ext4.h> -static int default_mb_history_length = 1000; - -module_param_named(default_mb_history_length, default_mb_history_length, - int, 0644); -MODULE_PARM_DESC(default_mb_history_length, - "Default number of entries saved for mb_history"); - struct proc_dir_entry *ext4_proc_root; static struct kset *ext4_kset; @@ -189,6 +182,36 @@ void ext4_itable_unused_set(struct super_block *sb, bg->bg_itable_unused_hi = cpu_to_le16(count >> 16); } + +/* Just increment the non-pointer handle value */ +static handle_t *ext4_get_nojournal(void) +{ + handle_t *handle = current->journal_info; + unsigned long ref_cnt = (unsigned long)handle; + + BUG_ON(ref_cnt >= EXT4_NOJOURNAL_MAX_REF_COUNT); + + ref_cnt++; + handle = (handle_t *)ref_cnt; + + current->journal_info = handle; + return handle; +} + + +/* Decrement the non-pointer handle value */ +static void ext4_put_nojournal(handle_t *handle) +{ + unsigned long ref_cnt = (unsigned long)handle; + + BUG_ON(ref_cnt == 0); + + ref_cnt--; + handle = (handle_t *)ref_cnt; + + current->journal_info = handle; +} + /* * Wrappers for jbd2_journal_start/end. * @@ -215,11 +238,7 @@ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks) } return jbd2_journal_start(journal, nblocks); } - /* - * We're not journaling, return the appropriate indication. - */ - current->journal_info = EXT4_NOJOURNAL_HANDLE; - return current->journal_info; + return ext4_get_nojournal(); } /* @@ -235,11 +254,7 @@ int __ext4_journal_stop(const char *where, handle_t *handle) int rc; if (!ext4_handle_valid(handle)) { - /* - * Do this here since we don't call jbd2_journal_stop() in - * no-journal mode. - */ - current->journal_info = NULL; + ext4_put_nojournal(handle); return 0; } sb = handle->h_transaction->t_journal->j_private; @@ -580,6 +595,9 @@ static void ext4_put_super(struct super_block *sb) struct ext4_super_block *es = sbi->s_es; int i, err; + flush_workqueue(sbi->dio_unwritten_wq); + destroy_workqueue(sbi->dio_unwritten_wq); + lock_super(sb); lock_kernel(); if (sb->s_dirt) @@ -684,6 +702,8 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei->i_allocated_meta_blocks = 0; ei->i_delalloc_reserved_flag = 0; spin_lock_init(&(ei->i_block_reservation_lock)); + INIT_LIST_HEAD(&ei->i_aio_dio_complete_list); + ei->cur_aio_dio = NULL; return &ei->vfs_inode; } @@ -1052,7 +1072,7 @@ enum { Opt_journal_update, Opt_journal_dev, Opt_journal_checksum, Opt_journal_async_commit, Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, - Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length, + Opt_data_err_abort, Opt_data_err_ignore, Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize, @@ -1099,7 +1119,6 @@ static const match_table_t tokens = { {Opt_data_writeback, "data=writeback"}, {Opt_data_err_abort, "data_err=abort"}, {Opt_data_err_ignore, "data_err=ignore"}, - {Opt_mb_history_length, "mb_history_length=%u"}, {Opt_offusrjquota, "usrjquota="}, {Opt_usrjquota, "usrjquota=%s"}, {Opt_offgrpjquota, "grpjquota="}, @@ -1340,13 +1359,6 @@ static int parse_options(char *options, struct super_block *sb, case Opt_data_err_ignore: clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT); break; - case Opt_mb_history_length: - if (match_int(&args[0], &option)) - return 0; - if (option < 0) - return 0; - sbi->s_mb_history_max = option; - break; #ifdef CONFIG_QUOTA case Opt_usrjquota: qtype = USRQUOTA; @@ -1646,13 +1658,6 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es, EXT4_INODES_PER_GROUP(sb), sbi->s_mount_opt); - if (EXT4_SB(sb)->s_journal) { - ext4_msg(sb, KERN_INFO, "%s journal on %s", - EXT4_SB(sb)->s_journal->j_inode ? "internal" : - "external", EXT4_SB(sb)->s_journal->j_devname); - } else { - ext4_msg(sb, KERN_INFO, "no journal"); - } return res; } @@ -2197,6 +2202,7 @@ EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan); EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs); EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request); EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc); +EXT4_RW_ATTR_SBI_UI(max_writeback_mb_bump, s_max_writeback_mb_bump); static struct attribute *ext4_attrs[] = { ATTR_LIST(delayed_allocation_blocks), @@ -2210,6 +2216,7 @@ static struct attribute *ext4_attrs[] = { ATTR_LIST(mb_order2_req), ATTR_LIST(mb_stream_req), ATTR_LIST(mb_group_prealloc), + ATTR_LIST(max_writeback_mb_bump), NULL, }; @@ -2413,7 +2420,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ; sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME; sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME; - sbi->s_mb_history_max = default_mb_history_length; set_opt(sbi->s_mount_opt, BARRIER); @@ -2679,6 +2685,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } sbi->s_stripe = ext4_get_stripe_size(sbi); + sbi->s_max_writeback_mb_bump = 128; /* * set up enough so that it can read an inode @@ -2798,6 +2805,12 @@ no_journal: clear_opt(sbi->s_mount_opt, NOBH); } } + EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten"); + if (!EXT4_SB(sb)->dio_unwritten_wq) { + printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n"); + goto failed_mount_wq; + } + /* * The jbd2_journal_load will have done any necessary log recovery, * so we can safely mount the rest of the filesystem now. @@ -2849,12 +2862,12 @@ no_journal: "available"); } - if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) { + if (test_opt(sb, DELALLOC) && + (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) { ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - " "requested data journaling mode"); clear_opt(sbi->s_mount_opt, DELALLOC); - } else if (test_opt(sb, DELALLOC)) - ext4_msg(sb, KERN_INFO, "delayed allocation enabled"); + } err = ext4_setup_system_zone(sb); if (err) { @@ -2910,6 +2923,8 @@ cantfind_ext4: failed_mount4: ext4_msg(sb, KERN_ERR, "mount failed"); + destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq); +failed_mount_wq: ext4_release_system_zone(sb); if (sbi->s_journal) { jbd2_journal_destroy(sbi->s_journal); @@ -3164,9 +3179,7 @@ static int ext4_load_journal(struct super_block *sb, return -EINVAL; } - if (journal->j_flags & JBD2_BARRIER) - ext4_msg(sb, KERN_INFO, "barriers enabled"); - else + if (!(journal->j_flags & JBD2_BARRIER)) ext4_msg(sb, KERN_INFO, "barriers disabled"); if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) { @@ -3361,11 +3374,13 @@ static int ext4_sync_fs(struct super_block *sb, int wait) { int ret = 0; tid_t target; + struct ext4_sb_info *sbi = EXT4_SB(sb); trace_ext4_sync_fs(sb, wait); - if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) { + flush_workqueue(sbi->dio_unwritten_wq); + if (jbd2_journal_start_commit(sbi->s_journal, &target)) { if (wait) - jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target); + jbd2_log_wait_commit(sbi->s_journal, target); } return ret; } diff --git a/fs/fat/fat.h b/fs/fat/fat.h index adb0e72a176..7db0979c6b7 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -323,7 +323,7 @@ extern int fat_flush_inodes(struct super_block *sb, struct inode *i1, /* fat/misc.c */ extern void fat_fs_error(struct super_block *s, const char *fmt, ...) __attribute__ ((format (printf, 2, 3))) __cold; -extern void fat_clusters_flush(struct super_block *sb); +extern int fat_clusters_flush(struct super_block *sb); extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster); extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts, __le16 __time, __le16 __date, u8 time_cs); diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 04629d1302f..76b7961ab66 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -451,12 +451,16 @@ static void fat_write_super(struct super_block *sb) static int fat_sync_fs(struct super_block *sb, int wait) { - lock_super(sb); - fat_clusters_flush(sb); - sb->s_dirt = 0; - unlock_super(sb); + int err = 0; - return 0; + if (sb->s_dirt) { + lock_super(sb); + sb->s_dirt = 0; + err = fat_clusters_flush(sb); + unlock_super(sb); + } + + return err; } static void fat_put_super(struct super_block *sb) @@ -812,7 +816,7 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt) seq_puts(m, ",shortname=mixed"); break; case VFAT_SFN_DISPLAY_LOWER | VFAT_SFN_CREATE_WIN95: - /* seq_puts(m, ",shortname=lower"); */ + seq_puts(m, ",shortname=lower"); break; default: seq_puts(m, ",shortname=unknown"); @@ -963,7 +967,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug, opts->codepage = fat_default_codepage; opts->iocharset = fat_default_iocharset; if (is_vfat) { - opts->shortname = VFAT_SFN_DISPLAY_LOWER|VFAT_SFN_CREATE_WIN95; + opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95; opts->rodir = 0; } else { opts->shortname = 0; diff --git a/fs/fat/misc.c b/fs/fat/misc.c index 4e35be873e0..0f55f5cb732 100644 --- a/fs/fat/misc.c +++ b/fs/fat/misc.c @@ -43,19 +43,19 @@ EXPORT_SYMBOL_GPL(fat_fs_error); /* Flushes the number of free clusters on FAT32 */ /* XXX: Need to write one per FSINFO block. Currently only writes 1 */ -void fat_clusters_flush(struct super_block *sb) +int fat_clusters_flush(struct super_block *sb) { struct msdos_sb_info *sbi = MSDOS_SB(sb); struct buffer_head *bh; struct fat_boot_fsinfo *fsinfo; if (sbi->fat_bits != 32) - return; + return 0; bh = sb_bread(sb, sbi->fsinfo_sector); if (bh == NULL) { printk(KERN_ERR "FAT: bread failed in fat_clusters_flush\n"); - return; + return -EIO; } fsinfo = (struct fat_boot_fsinfo *)bh->b_data; @@ -74,6 +74,8 @@ void fat_clusters_flush(struct super_block *sb) mark_buffer_dirty(bh); } brelse(bh); + + return 0; } /* diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index cb6e8355711..f565f24019b 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -499,17 +499,10 @@ xlate_to_uni(const unsigned char *name, int len, unsigned char *outname, int charlen; if (utf8) { - int name_len = strlen(name); - - *outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname); - - /* - * We stripped '.'s before and set len appropriately, - * but utf8s_to_utf16s doesn't care about len - */ - *outlen -= (name_len - len); - - if (*outlen > 255) + *outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname); + if (*outlen < 0) + return *outlen; + else if (*outlen > 255) return -ENAMETOOLONG; op = &outname[*outlen * sizeof(wchar_t)]; diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 5d70b3e6d49..ca0f5eb62b2 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -643,6 +643,7 @@ out: int __jbd2_journal_remove_checkpoint(struct journal_head *jh) { + struct transaction_chp_stats_s *stats; transaction_t *transaction; journal_t *journal; int ret = 0; @@ -679,6 +680,12 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh) /* OK, that was the last buffer for the transaction: we can now safely remove this transaction from the log */ + stats = &transaction->t_chp_stats; + if (stats->cs_chp_time) + stats->cs_chp_time = jbd2_time_diff(stats->cs_chp_time, + jiffies); + trace_jbd2_checkpoint_stats(journal->j_fs_dev->bd_dev, + transaction->t_tid, stats); __jbd2_journal_drop_transaction(journal, transaction); kfree(transaction); diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 26d991ddc1e..d4cfd6d2779 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -410,10 +410,10 @@ void jbd2_journal_commit_transaction(journal_t *journal) if (commit_transaction->t_synchronous_commit) write_op = WRITE_SYNC_PLUG; trace_jbd2_commit_locking(journal, commit_transaction); - stats.u.run.rs_wait = commit_transaction->t_max_wait; - stats.u.run.rs_locked = jiffies; - stats.u.run.rs_running = jbd2_time_diff(commit_transaction->t_start, - stats.u.run.rs_locked); + stats.run.rs_wait = commit_transaction->t_max_wait; + stats.run.rs_locked = jiffies; + stats.run.rs_running = jbd2_time_diff(commit_transaction->t_start, + stats.run.rs_locked); spin_lock(&commit_transaction->t_handle_lock); while (commit_transaction->t_updates) { @@ -486,9 +486,9 @@ void jbd2_journal_commit_transaction(journal_t *journal) jbd2_journal_switch_revoke_table(journal); trace_jbd2_commit_flushing(journal, commit_transaction); - stats.u.run.rs_flushing = jiffies; - stats.u.run.rs_locked = jbd2_time_diff(stats.u.run.rs_locked, - stats.u.run.rs_flushing); + stats.run.rs_flushing = jiffies; + stats.run.rs_locked = jbd2_time_diff(stats.run.rs_locked, + stats.run.rs_flushing); commit_transaction->t_state = T_FLUSH; journal->j_committing_transaction = commit_transaction; @@ -523,11 +523,11 @@ void jbd2_journal_commit_transaction(journal_t *journal) spin_unlock(&journal->j_state_lock); trace_jbd2_commit_logging(journal, commit_transaction); - stats.u.run.rs_logging = jiffies; - stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing, - stats.u.run.rs_logging); - stats.u.run.rs_blocks = commit_transaction->t_outstanding_credits; - stats.u.run.rs_blocks_logged = 0; + stats.run.rs_logging = jiffies; + stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing, + stats.run.rs_logging); + stats.run.rs_blocks = commit_transaction->t_outstanding_credits; + stats.run.rs_blocks_logged = 0; J_ASSERT(commit_transaction->t_nr_buffers <= commit_transaction->t_outstanding_credits); @@ -695,7 +695,7 @@ start_journal_io: submit_bh(write_op, bh); } cond_resched(); - stats.u.run.rs_blocks_logged += bufs; + stats.run.rs_blocks_logged += bufs; /* Force a new descriptor to be generated next time round the loop. */ @@ -988,33 +988,30 @@ restart_loop: J_ASSERT(commit_transaction->t_state == T_COMMIT); commit_transaction->t_start = jiffies; - stats.u.run.rs_logging = jbd2_time_diff(stats.u.run.rs_logging, - commit_transaction->t_start); + stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging, + commit_transaction->t_start); /* - * File the transaction for history + * File the transaction statistics */ - stats.ts_type = JBD2_STATS_RUN; stats.ts_tid = commit_transaction->t_tid; - stats.u.run.rs_handle_count = commit_transaction->t_handle_count; - spin_lock(&journal->j_history_lock); - memcpy(journal->j_history + journal->j_history_cur, &stats, - sizeof(stats)); - if (++journal->j_history_cur == journal->j_history_max) - journal->j_history_cur = 0; + stats.run.rs_handle_count = commit_transaction->t_handle_count; + trace_jbd2_run_stats(journal->j_fs_dev->bd_dev, + commit_transaction->t_tid, &stats.run); /* * Calculate overall stats */ + spin_lock(&journal->j_history_lock); journal->j_stats.ts_tid++; - journal->j_stats.u.run.rs_wait += stats.u.run.rs_wait; - journal->j_stats.u.run.rs_running += stats.u.run.rs_running; - journal->j_stats.u.run.rs_locked += stats.u.run.rs_locked; - journal->j_stats.u.run.rs_flushing += stats.u.run.rs_flushing; - journal->j_stats.u.run.rs_logging += stats.u.run.rs_logging; - journal->j_stats.u.run.rs_handle_count += stats.u.run.rs_handle_count; - journal->j_stats.u.run.rs_blocks += stats.u.run.rs_blocks; - journal->j_stats.u.run.rs_blocks_logged += stats.u.run.rs_blocks_logged; + journal->j_stats.run.rs_wait += stats.run.rs_wait; + journal->j_stats.run.rs_running += stats.run.rs_running; + journal->j_stats.run.rs_locked += stats.run.rs_locked; + journal->j_stats.run.rs_flushing += stats.run.rs_flushing; + journal->j_stats.run.rs_logging += stats.run.rs_logging; + journal->j_stats.run.rs_handle_count += stats.run.rs_handle_count; + journal->j_stats.run.rs_blocks += stats.run.rs_blocks; + journal->j_stats.run.rs_blocks_logged += stats.run.rs_blocks_logged; spin_unlock(&journal->j_history_lock); commit_transaction->t_state = T_FINISHED; diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 53b86e16e5f..b0ab5219bec 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -136,10 +136,6 @@ static int kjournald2(void *arg) journal->j_task = current; wake_up(&journal->j_wait_done_commit); - printk(KERN_INFO "kjournald2 starting: pid %d, dev %s, " - "commit interval %ld seconds\n", current->pid, - journal->j_devname, journal->j_commit_interval / HZ); - /* * And now, wait forever for commit wakeup events. */ @@ -223,7 +219,8 @@ static int jbd2_journal_start_thread(journal_t *journal) { struct task_struct *t; - t = kthread_run(kjournald2, journal, "kjournald2"); + t = kthread_run(kjournald2, journal, "jbd2/%s", + journal->j_devname); if (IS_ERR(t)) return PTR_ERR(t); @@ -679,153 +676,6 @@ struct jbd2_stats_proc_session { int max; }; -static void *jbd2_history_skip_empty(struct jbd2_stats_proc_session *s, - struct transaction_stats_s *ts, - int first) -{ - if (ts == s->stats + s->max) - ts = s->stats; - if (!first && ts == s->stats + s->start) - return NULL; - while (ts->ts_type == 0) { - ts++; - if (ts == s->stats + s->max) - ts = s->stats; - if (ts == s->stats + s->start) - return NULL; - } - return ts; - -} - -static void *jbd2_seq_history_start(struct seq_file *seq, loff_t *pos) -{ - struct jbd2_stats_proc_session *s = seq->private; - struct transaction_stats_s *ts; - int l = *pos; - - if (l == 0) - return SEQ_START_TOKEN; - ts = jbd2_history_skip_empty(s, s->stats + s->start, 1); - if (!ts) - return NULL; - l--; - while (l) { - ts = jbd2_history_skip_empty(s, ++ts, 0); - if (!ts) - break; - l--; - } - return ts; -} - -static void *jbd2_seq_history_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct jbd2_stats_proc_session *s = seq->private; - struct transaction_stats_s *ts = v; - - ++*pos; - if (v == SEQ_START_TOKEN) - return jbd2_history_skip_empty(s, s->stats + s->start, 1); - else - return jbd2_history_skip_empty(s, ++ts, 0); -} - -static int jbd2_seq_history_show(struct seq_file *seq, void *v) -{ - struct transaction_stats_s *ts = v; - if (v == SEQ_START_TOKEN) { - seq_printf(seq, "%-4s %-5s %-5s %-5s %-5s %-5s %-5s %-6s %-5s " - "%-5s %-5s %-5s %-5s %-5s\n", "R/C", "tid", - "wait", "run", "lock", "flush", "log", "hndls", - "block", "inlog", "ctime", "write", "drop", - "close"); - return 0; - } - if (ts->ts_type == JBD2_STATS_RUN) - seq_printf(seq, "%-4s %-5lu %-5u %-5u %-5u %-5u %-5u " - "%-6lu %-5lu %-5lu\n", "R", ts->ts_tid, - jiffies_to_msecs(ts->u.run.rs_wait), - jiffies_to_msecs(ts->u.run.rs_running), - jiffies_to_msecs(ts->u.run.rs_locked), - jiffies_to_msecs(ts->u.run.rs_flushing), - jiffies_to_msecs(ts->u.run.rs_logging), - ts->u.run.rs_handle_count, - ts->u.run.rs_blocks, - ts->u.run.rs_blocks_logged); - else if (ts->ts_type == JBD2_STATS_CHECKPOINT) - seq_printf(seq, "%-4s %-5lu %48s %-5u %-5lu %-5lu %-5lu\n", - "C", ts->ts_tid, " ", - jiffies_to_msecs(ts->u.chp.cs_chp_time), - ts->u.chp.cs_written, ts->u.chp.cs_dropped, - ts->u.chp.cs_forced_to_close); - else - J_ASSERT(0); - return 0; -} - -static void jbd2_seq_history_stop(struct seq_file *seq, void *v) -{ -} - -static const struct seq_operations jbd2_seq_history_ops = { - .start = jbd2_seq_history_start, - .next = jbd2_seq_history_next, - .stop = jbd2_seq_history_stop, - .show = jbd2_seq_history_show, -}; - -static int jbd2_seq_history_open(struct inode *inode, struct file *file) -{ - journal_t *journal = PDE(inode)->data; - struct jbd2_stats_proc_session *s; - int rc, size; - - s = kmalloc(sizeof(*s), GFP_KERNEL); - if (s == NULL) - return -ENOMEM; - size = sizeof(struct transaction_stats_s) * journal->j_history_max; - s->stats = kmalloc(size, GFP_KERNEL); - if (s->stats == NULL) { - kfree(s); - return -ENOMEM; - } - spin_lock(&journal->j_history_lock); - memcpy(s->stats, journal->j_history, size); - s->max = journal->j_history_max; - s->start = journal->j_history_cur % s->max; - spin_unlock(&journal->j_history_lock); - - rc = seq_open(file, &jbd2_seq_history_ops); - if (rc == 0) { - struct seq_file *m = file->private_data; - m->private = s; - } else { - kfree(s->stats); - kfree(s); - } - return rc; - -} - -static int jbd2_seq_history_release(struct inode *inode, struct file *file) -{ - struct seq_file *seq = file->private_data; - struct jbd2_stats_proc_session *s = seq->private; - - kfree(s->stats); - kfree(s); - return seq_release(inode, file); -} - -static struct file_operations jbd2_seq_history_fops = { - .owner = THIS_MODULE, - .open = jbd2_seq_history_open, - .read = seq_read, - .llseek = seq_lseek, - .release = jbd2_seq_history_release, -}; - static void *jbd2_seq_info_start(struct seq_file *seq, loff_t *pos) { return *pos ? NULL : SEQ_START_TOKEN; @@ -842,29 +692,29 @@ static int jbd2_seq_info_show(struct seq_file *seq, void *v) if (v != SEQ_START_TOKEN) return 0; - seq_printf(seq, "%lu transaction, each upto %u blocks\n", + seq_printf(seq, "%lu transaction, each up to %u blocks\n", s->stats->ts_tid, s->journal->j_max_transaction_buffers); if (s->stats->ts_tid == 0) return 0; seq_printf(seq, "average: \n %ums waiting for transaction\n", - jiffies_to_msecs(s->stats->u.run.rs_wait / s->stats->ts_tid)); + jiffies_to_msecs(s->stats->run.rs_wait / s->stats->ts_tid)); seq_printf(seq, " %ums running transaction\n", - jiffies_to_msecs(s->stats->u.run.rs_running / s->stats->ts_tid)); + jiffies_to_msecs(s->stats->run.rs_running / s->stats->ts_tid)); seq_printf(seq, " %ums transaction was being locked\n", - jiffies_to_msecs(s->stats->u.run.rs_locked / s->stats->ts_tid)); + jiffies_to_msecs(s->stats->run.rs_locked / s->stats->ts_tid)); seq_printf(seq, " %ums flushing data (in ordered mode)\n", - jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid)); + jiffies_to_msecs(s->stats->run.rs_flushing / s->stats->ts_tid)); seq_printf(seq, " %ums logging transaction\n", - jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid)); + jiffies_to_msecs(s->stats->run.rs_logging / s->stats->ts_tid)); seq_printf(seq, " %lluus average transaction commit time\n", div_u64(s->journal->j_average_commit_time, 1000)); seq_printf(seq, " %lu handles per transaction\n", - s->stats->u.run.rs_handle_count / s->stats->ts_tid); + s->stats->run.rs_handle_count / s->stats->ts_tid); seq_printf(seq, " %lu blocks per transaction\n", - s->stats->u.run.rs_blocks / s->stats->ts_tid); + s->stats->run.rs_blocks / s->stats->ts_tid); seq_printf(seq, " %lu logged blocks per transaction\n", - s->stats->u.run.rs_blocks_logged / s->stats->ts_tid); + s->stats->run.rs_blocks_logged / s->stats->ts_tid); return 0; } @@ -920,7 +770,7 @@ static int jbd2_seq_info_release(struct inode *inode, struct file *file) return seq_release(inode, file); } -static struct file_operations jbd2_seq_info_fops = { +static const struct file_operations jbd2_seq_info_fops = { .owner = THIS_MODULE, .open = jbd2_seq_info_open, .read = seq_read, @@ -934,8 +784,6 @@ static void jbd2_stats_proc_init(journal_t *journal) { journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats); if (journal->j_proc_entry) { - proc_create_data("history", S_IRUGO, journal->j_proc_entry, - &jbd2_seq_history_fops, journal); proc_create_data("info", S_IRUGO, journal->j_proc_entry, &jbd2_seq_info_fops, journal); } @@ -944,27 +792,9 @@ static void jbd2_stats_proc_init(journal_t *journal) static void jbd2_stats_proc_exit(journal_t *journal) { remove_proc_entry("info", journal->j_proc_entry); - remove_proc_entry("history", journal->j_proc_entry); remove_proc_entry(journal->j_devname, proc_jbd2_stats); } -static void journal_init_stats(journal_t *journal) -{ - int size; - - if (!proc_jbd2_stats) - return; - - journal->j_history_max = 100; - size = sizeof(struct transaction_stats_s) * journal->j_history_max; - journal->j_history = kzalloc(size, GFP_KERNEL); - if (!journal->j_history) { - journal->j_history_max = 0; - return; - } - spin_lock_init(&journal->j_history_lock); -} - /* * Management for journal control blocks: functions to create and * destroy journal_t structures, and to initialise and read existing @@ -1009,7 +839,7 @@ static journal_t * journal_init_common (void) goto fail; } - journal_init_stats(journal); + spin_lock_init(&journal->j_history_lock); return journal; fail: @@ -1115,7 +945,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) while ((p = strchr(p, '/'))) *p = '!'; p = journal->j_devname + strlen(journal->j_devname); - sprintf(p, ":%lu", journal->j_inode->i_ino); + sprintf(p, "-%lu", journal->j_inode->i_ino); jbd_debug(1, "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n", journal, inode->i_sb->s_id, inode->i_ino, diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 00388d2a3c9..5c01fc148ce 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -176,7 +176,7 @@ static const struct file_operations exports_operations = { extern int nfsd_pool_stats_open(struct inode *inode, struct file *file); extern int nfsd_pool_stats_release(struct inode *inode, struct file *file); -static struct file_operations pool_stats_operations = { +static const struct file_operations pool_stats_operations = { .open = nfsd_pool_stats_open, .read = seq_read, .llseek = seq_lseek, diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 6a2711f4c32..5941958f1e4 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -36,6 +36,7 @@ void nilfs_btnode_cache_init_once(struct address_space *btnc) { + memset(btnc, 0, sizeof(*btnc)); INIT_RADIX_TREE(&btnc->page_tree, GFP_ATOMIC); spin_lock_init(&btnc->tree_lock); INIT_LIST_HEAD(&btnc->private_list); diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c index 1a4fa04cf07..e097099bfc8 100644 --- a/fs/nilfs2/dir.c +++ b/fs/nilfs2/dir.c @@ -697,7 +697,7 @@ not_empty: return 0; } -struct file_operations nilfs_dir_operations = { +const struct file_operations nilfs_dir_operations = { .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = nilfs_readdir, diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c index 7d7b4983dee..30292df443c 100644 --- a/fs/nilfs2/file.c +++ b/fs/nilfs2/file.c @@ -134,7 +134,7 @@ static int nilfs_file_mmap(struct file *file, struct vm_area_struct *vma) * We have mostly NULL's here: the current defaults are ok for * the nilfs filesystem. */ -struct file_operations nilfs_file_operations = { +const struct file_operations nilfs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .write = do_sync_write, diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 2d2c501deb5..5040220c373 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -400,6 +400,7 @@ int nilfs_read_inode_common(struct inode *inode, ii->i_dir_acl = S_ISREG(inode->i_mode) ? 0 : le32_to_cpu(raw_inode->i_dir_acl); #endif + ii->i_dir_start_lookup = 0; ii->i_cno = 0; inode->i_generation = le32_to_cpu(raw_inode->i_generation); diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c index b18c4998f8d..f6326112d64 100644 --- a/fs/nilfs2/mdt.c +++ b/fs/nilfs2/mdt.c @@ -433,7 +433,7 @@ static const struct address_space_operations def_mdt_aops = { }; static const struct inode_operations def_mdt_iops; -static struct file_operations def_mdt_fops; +static const struct file_operations def_mdt_fops; /* * NILFS2 uses pseudo inodes for meta data files such as DAT, cpfile, sufile, diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h index bad7368782d..4da6f67e9a9 100644 --- a/fs/nilfs2/nilfs.h +++ b/fs/nilfs2/nilfs.h @@ -294,9 +294,9 @@ void nilfs_clear_gcdat_inode(struct the_nilfs *); /* * Inodes and files operations */ -extern struct file_operations nilfs_dir_operations; +extern const struct file_operations nilfs_dir_operations; extern const struct inode_operations nilfs_file_inode_operations; -extern struct file_operations nilfs_file_operations; +extern const struct file_operations nilfs_file_operations; extern const struct address_space_operations nilfs_aops; extern const struct inode_operations nilfs_dir_inode_operations; extern const struct inode_operations nilfs_special_inode_operations; diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c index 2224b4d07bf..44a88a9fa2c 100644 --- a/fs/nls/nls_base.c +++ b/fs/nls/nls_base.c @@ -124,10 +124,10 @@ int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs) while (*s && len > 0) { if (*s & 0x80) { size = utf8_to_utf32(s, len, &u); - if (size < 0) { - /* Ignore character and move on */ - size = 1; - } else if (u >= PLANE_SIZE) { + if (size < 0) + return -EINVAL; + + if (u >= PLANE_SIZE) { u -= PLANE_SIZE; *op++ = (wchar_t) (SURROGATE_PAIR | ((u >> 10) & SURROGATE_BITS)); diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 09cc25d0461..c452d116b89 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -966,7 +966,7 @@ static ssize_t o2hb_debug_read(struct file *file, char __user *buf, } #endif /* CONFIG_DEBUG_FS */ -static struct file_operations o2hb_debug_fops = { +static const struct file_operations o2hb_debug_fops = { .open = o2hb_debug_open, .release = o2hb_debug_release, .read = o2hb_debug_read, diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c index cfb2be708ab..da794bc07a6 100644 --- a/fs/ocfs2/cluster/netdebug.c +++ b/fs/ocfs2/cluster/netdebug.c @@ -207,7 +207,7 @@ static int nst_fop_release(struct inode *inode, struct file *file) return seq_release_private(inode, file); } -static struct file_operations nst_seq_fops = { +static const struct file_operations nst_seq_fops = { .open = nst_fop_open, .read = seq_read, .llseek = seq_lseek, @@ -388,7 +388,7 @@ static int sc_fop_release(struct inode *inode, struct file *file) return seq_release_private(inode, file); } -static struct file_operations sc_seq_fops = { +static const struct file_operations sc_seq_fops = { .open = sc_fop_open, .read = seq_read, .llseek = seq_lseek, diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c index ca46002ec10..42b0bad7a61 100644 --- a/fs/ocfs2/dlm/dlmdebug.c +++ b/fs/ocfs2/dlm/dlmdebug.c @@ -478,7 +478,7 @@ bail: return -ENOMEM; } -static struct file_operations debug_purgelist_fops = { +static const struct file_operations debug_purgelist_fops = { .open = debug_purgelist_open, .release = debug_buffer_release, .read = debug_buffer_read, @@ -538,7 +538,7 @@ bail: return -ENOMEM; } -static struct file_operations debug_mle_fops = { +static const struct file_operations debug_mle_fops = { .open = debug_mle_open, .release = debug_buffer_release, .read = debug_buffer_read, @@ -741,7 +741,7 @@ static int debug_lockres_release(struct inode *inode, struct file *file) return seq_release_private(inode, file); } -static struct file_operations debug_lockres_fops = { +static const struct file_operations debug_lockres_fops = { .open = debug_lockres_open, .release = debug_lockres_release, .read = seq_read, @@ -925,7 +925,7 @@ bail: return -ENOMEM; } -static struct file_operations debug_state_fops = { +static const struct file_operations debug_state_fops = { .open = debug_state_open, .release = debug_buffer_release, .read = debug_buffer_read, diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 4cc3c890a2c..c0e48aeebb1 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -373,7 +373,7 @@ static ssize_t ocfs2_debug_read(struct file *file, char __user *buf, } #endif /* CONFIG_DEBUG_FS */ -static struct file_operations ocfs2_osb_debug_fops = { +static const struct file_operations ocfs2_osb_debug_fops = { .open = ocfs2_osb_debug_open, .release = ocfs2_debug_release, .read = ocfs2_debug_read, diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c index 3680bae335b..b42d6241903 100644 --- a/fs/omfs/dir.c +++ b/fs/omfs/dir.c @@ -498,7 +498,7 @@ const struct inode_operations omfs_dir_inops = { .rmdir = omfs_rmdir, }; -struct file_operations omfs_dir_operations = { +const struct file_operations omfs_dir_operations = { .read = generic_read_dir, .readdir = omfs_readdir, .llseek = generic_file_llseek, diff --git a/fs/omfs/file.c b/fs/omfs/file.c index 4845fbb18e6..399487c0936 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -322,7 +322,7 @@ static sector_t omfs_bmap(struct address_space *mapping, sector_t block) return generic_block_bmap(mapping, block, omfs_get_block); } -struct file_operations omfs_file_operations = { +const struct file_operations omfs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .write = do_sync_write, diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h index df71039945a..ebe2fdbe535 100644 --- a/fs/omfs/omfs.h +++ b/fs/omfs/omfs.h @@ -44,14 +44,14 @@ extern int omfs_allocate_range(struct super_block *sb, int min_request, extern int omfs_clear_range(struct super_block *sb, u64 block, int count); /* dir.c */ -extern struct file_operations omfs_dir_operations; +extern const struct file_operations omfs_dir_operations; extern const struct inode_operations omfs_dir_inops; extern int omfs_make_empty(struct inode *inode, struct super_block *sb); extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header, u64 fsblock); /* file.c */ -extern struct file_operations omfs_file_operations; +extern const struct file_operations omfs_file_operations; extern const struct inode_operations omfs_file_inops; extern const struct address_space_operations omfs_aops; extern void omfs_make_empty_table(struct buffer_head *bh, int offset); diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 9cca3785cab..66d6106a206 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -1,6 +1,7 @@ #ifndef _ASM_GENERIC_GPIO_H #define _ASM_GENERIC_GPIO_H +#include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index ae1e9e16695..b69347b8904 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -387,6 +387,7 @@ struct drm_crtc { * @get_modes: get mode list for this connector * @set_property: property for this connector may need update * @destroy: make object go away + * @force: notify the driver the connector is forced on * * Each CRTC may have one or more connectors attached to it. The functions * below allow the core DRM code to control connectors, enumerate available modes, @@ -401,6 +402,7 @@ struct drm_connector_funcs { int (*set_property)(struct drm_connector *connector, struct drm_property *property, uint64_t val); void (*destroy)(struct drm_connector *connector); + void (*force)(struct drm_connector *connector); }; struct drm_encoder_funcs { @@ -429,6 +431,13 @@ struct drm_encoder { void *helper_private; }; +enum drm_connector_force { + DRM_FORCE_UNSPECIFIED, + DRM_FORCE_OFF, + DRM_FORCE_ON, /* force on analog part normally */ + DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ +}; + /** * drm_connector - central DRM connector control structure * @crtc: CRTC this connector is currently connected to, NULL if none @@ -478,9 +487,12 @@ struct drm_connector { void *helper_private; + /* forced on connector */ + enum drm_connector_force force; uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; uint32_t force_encoder_id; struct drm_encoder *encoder; /* currently active encoder */ + void *fb_helper_private; }; /** @@ -746,7 +758,7 @@ extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, extern bool drm_detect_hdmi_monitor(struct edid *edid); extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, - bool reduced, bool interlaced); + bool reduced, bool interlaced, bool margins); extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool interlaced, int margins); diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 4c8dacaf4f5..ef47dfd8e5e 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -39,6 +39,7 @@ #include <linux/fb.h> +#include "drm_fb_helper.h" struct drm_crtc_helper_funcs { /* * Control power levels on the CRTC. If the mode passed in is @@ -119,10 +120,11 @@ static inline void drm_encoder_helper_add(struct drm_encoder *encoder, encoder->helper_private = (void *)funcs; } -static inline void drm_connector_helper_add(struct drm_connector *connector, +static inline int drm_connector_helper_add(struct drm_connector *connector, const struct drm_connector_helper_funcs *funcs) { connector->helper_private = (void *)funcs; + return drm_fb_helper_add_connector(connector); } extern int drm_helper_resume_force_mode(struct drm_device *dev); diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 88fffbdfa26..4aa5740ce59 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -35,11 +35,30 @@ struct drm_fb_helper_crtc { struct drm_mode_set mode_set; }; + struct drm_fb_helper_funcs { void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, int regno); }; +/* mode specified on the command line */ +struct drm_fb_helper_cmdline_mode { + bool specified; + bool refresh_specified; + bool bpp_specified; + int xres, yres; + int bpp; + int refresh; + bool rb; + bool interlace; + bool cvt; + bool margins; +}; + +struct drm_fb_helper_connector { + struct drm_fb_helper_cmdline_mode cmdline_mode; +}; + struct drm_fb_helper { struct drm_framebuffer *fb; struct drm_device *dev; @@ -57,6 +76,8 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev, uint32_t fb_height, uint32_t surface_width, uint32_t surface_height, + uint32_t surface_depth, + uint32_t surface_bpp, struct drm_framebuffer **fb_ptr)); int drm_fb_helper_init_crtc_count(struct drm_fb_helper *helper, int crtc_count, int max_conn); @@ -79,4 +100,7 @@ void drm_fb_helper_fill_var(struct fb_info *info, struct drm_framebuffer *fb, uint32_t fb_width, uint32_t fb_height); void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch); +int drm_fb_helper_add_connector(struct drm_connector *connector); +int drm_fb_helper_parse_command_line(struct drm_device *dev); + #endif diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 086e5c362d3..817b23705c9 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -397,7 +397,7 @@ struct atmdev_ops { /* only send is required */ int (*getsockopt)(struct atm_vcc *vcc,int level,int optname, void __user *optval,int optlen); int (*setsockopt)(struct atm_vcc *vcc,int level,int optname, - void __user *optval,int optlen); + void __user *optval,unsigned int optlen); int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags); void (*phy_put)(struct atm_dev *dev,unsigned char value, diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index b62bb9294d0..0008dee6651 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -37,7 +37,7 @@ extern void cgroup_exit(struct task_struct *p, int run_callbacks); extern int cgroupstats_build(struct cgroupstats *stats, struct dentry *dentry); -extern struct file_operations proc_cgroup_operations; +extern const struct file_operations proc_cgroup_operations; /* Define the enumeration of all cgroup subsystems */ #define SUBSYS(_x) _x ## _subsys_id, diff --git a/include/linux/fs.h b/include/linux/fs.h index 2adaa2529f1..a1e6899d4b6 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2446,7 +2446,7 @@ static int __fops ## _open(struct inode *inode, struct file *file) \ __simple_attr_check_format(__fmt, 0ull); \ return simple_attr_open(inode, file, __get, __set, __fmt); \ } \ -static struct file_operations __fops = { \ +static const struct file_operations __fops = { \ .owner = THIS_MODULE, \ .open = __fops ## _open, \ .release = simple_attr_release, \ diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 5eb9b0f857e..5a9aae4adb4 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -44,7 +44,7 @@ struct ip_tunnel_prl { __u16 flags; __u16 __reserved; __u32 datalen; - __u32 rs_delay; + __u32 __reserved2; /* data follows */ }; diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 52695d3dfd0..f1011f7f3d4 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -464,9 +464,9 @@ struct handle_s */ struct transaction_chp_stats_s { unsigned long cs_chp_time; - unsigned long cs_forced_to_close; - unsigned long cs_written; - unsigned long cs_dropped; + __u32 cs_forced_to_close; + __u32 cs_written; + __u32 cs_dropped; }; /* The transaction_t type is the guts of the journaling mechanism. It @@ -668,23 +668,16 @@ struct transaction_run_stats_s { unsigned long rs_flushing; unsigned long rs_logging; - unsigned long rs_handle_count; - unsigned long rs_blocks; - unsigned long rs_blocks_logged; + __u32 rs_handle_count; + __u32 rs_blocks; + __u32 rs_blocks_logged; }; struct transaction_stats_s { - int ts_type; unsigned long ts_tid; - union { - struct transaction_run_stats_s run; - struct transaction_chp_stats_s chp; - } u; + struct transaction_run_stats_s run; }; -#define JBD2_STATS_RUN 1 -#define JBD2_STATS_CHECKPOINT 2 - static inline unsigned long jbd2_time_diff(unsigned long start, unsigned long end) { @@ -988,12 +981,6 @@ struct journal_s /* * Journal statistics */ - struct transaction_stats_s *j_history; - int j_history_max; - int j_history_cur; - /* - * Protect the transactions statistics history - */ spinlock_t j_history_lock; struct proc_dir_entry *j_proc_entry; struct transaction_stats_s j_stats; diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 0d45b4e8d36..08bc776d05e 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -145,14 +145,14 @@ static inline int ip_mroute_opt(int opt) #endif #ifdef CONFIG_IP_MROUTE -extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int); +extern int ip_mroute_setsockopt(struct sock *, int, char __user *, unsigned int); extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *); extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg); extern int ip_mr_init(void); #else static inline int ip_mroute_setsockopt(struct sock *sock, - int optname, char __user *optval, int optlen) + int optname, char __user *optval, unsigned int optlen) { return -ENOPROTOOPT; } diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 43dc97e3218..b191865a6ca 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -134,7 +134,7 @@ static inline int ip6_mroute_opt(int opt) struct sock; #ifdef CONFIG_IPV6_MROUTE -extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, int); +extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, unsigned int); extern int ip6_mroute_getsockopt(struct sock *, int, char __user *, int __user *); extern int ip6_mr_input(struct sk_buff *skb); extern int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg); @@ -143,7 +143,7 @@ extern void ip6_mr_cleanup(void); #else static inline int ip6_mroute_setsockopt(struct sock *sock, - int optname, char __user *optval, int optlen) + int optname, char __user *optval, unsigned int optlen) { return -ENOPROTOOPT; } diff --git a/include/linux/net.h b/include/linux/net.h index 9040a10584f..529a0931711 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -178,11 +178,11 @@ struct proto_ops { int (*listen) (struct socket *sock, int len); int (*shutdown) (struct socket *sock, int flags); int (*setsockopt)(struct socket *sock, int level, - int optname, char __user *optval, int optlen); + int optname, char __user *optval, unsigned int optlen); int (*getsockopt)(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen); int (*compat_setsockopt)(struct socket *sock, int level, - int optname, char __user *optval, int optlen); + int optname, char __user *optval, unsigned int optlen); int (*compat_getsockopt)(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen); int (*sendmsg) (struct kiocb *iocb, struct socket *sock, @@ -256,7 +256,7 @@ extern int kernel_getpeername(struct socket *sock, struct sockaddr *addr, extern int kernel_getsockopt(struct socket *sock, int level, int optname, char *optval, int *optlen); extern int kernel_setsockopt(struct socket *sock, int level, int optname, - char *optval, int optlen); + char *optval, unsigned int optlen); extern int kernel_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags); extern int kernel_sock_ioctl(struct socket *sock, int cmd, unsigned long arg); @@ -313,7 +313,7 @@ SOCKCALL_WRAP(name, compat_ioctl, (struct socket *sock, unsigned int cmd, \ SOCKCALL_WRAP(name, listen, (struct socket *sock, int len), (sock, len)) \ SOCKCALL_WRAP(name, shutdown, (struct socket *sock, int flags), (sock, flags)) \ SOCKCALL_WRAP(name, setsockopt, (struct socket *sock, int level, int optname, \ - char __user *optval, int optlen), (sock, level, optname, optval, optlen)) \ + char __user *optval, unsigned int optlen), (sock, level, optname, optval, optlen)) \ SOCKCALL_WRAP(name, getsockopt, (struct socket *sock, int level, int optname, \ char __user *optval, int __user *optlen), (sock, level, optname, optval, optlen)) \ SOCKCALL_WRAP(name, sendmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len), \ diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 48cfe51bfdd..6132b5e6d9d 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -221,12 +221,12 @@ __ret;}) /* Call setsockopt() */ int nf_setsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt, - int len); + unsigned int len); int nf_getsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt, int *len); int compat_nf_setsockopt(struct sock *sk, u_int8_t pf, int optval, - char __user *opt, int len); + char __user *opt, unsigned int len); int compat_nf_getsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt, int *len); diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 731af71cddc..fcb9884df61 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -114,8 +114,7 @@ void res_counter_init(struct res_counter *counter, struct res_counter *parent); int __must_check res_counter_charge_locked(struct res_counter *counter, unsigned long val); int __must_check res_counter_charge(struct res_counter *counter, - unsigned long val, struct res_counter **limit_fail_at, - struct res_counter **soft_limit_at); + unsigned long val, struct res_counter **limit_fail_at); /* * uncharge - tell that some portion of the resource is released @@ -128,8 +127,7 @@ int __must_check res_counter_charge(struct res_counter *counter, */ void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val); -void res_counter_uncharge(struct res_counter *counter, unsigned long val, - bool *was_soft_limit_excess); +void res_counter_uncharge(struct res_counter *counter, unsigned long val); static inline bool res_counter_limit_check_locked(struct res_counter *cnt) { diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index fe661afe071..db532ce288b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -176,6 +176,9 @@ /* Qualcomm MSM SoCs */ #define PORT_MSM 88 +/* BCM63xx family SoCs */ +#define PORT_BCM63XX 89 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/include/net/compat.h b/include/net/compat.h index 5bbf8bf9efe..7c3002832d0 100644 --- a/include/net/compat.h +++ b/include/net/compat.h @@ -40,8 +40,8 @@ extern int put_cmsg_compat(struct msghdr*, int, int, int, void *); extern int cmsghdr_from_user_compat_to_kern(struct msghdr *, struct sock *, unsigned char *, int); -extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, int, - int (*)(struct sock *, int, int, char __user *, int)); +extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, unsigned int, + int (*)(struct sock *, int, int, char __user *, unsigned int)); extern int compat_mc_getsockopt(struct sock *, int, int, char __user *, int __user *, int (*)(struct sock *, int, int, char __user *, int __user *)); diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 03cffd9f64e..696d6e4ce68 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -48,13 +48,13 @@ struct inet_connection_sock_af_ops { u16 net_header_len; u16 sockaddr_len; int (*setsockopt)(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); int (*getsockopt)(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); #ifdef CONFIG_COMPAT int (*compat_setsockopt)(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); int (*compat_getsockopt)(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); @@ -332,5 +332,5 @@ extern void inet_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr); extern int inet_csk_compat_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); #endif /* _INET_CONNECTION_SOCK_H */ diff --git a/include/net/ip.h b/include/net/ip.h index 5b26a0bd178..2f47e5482b5 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -381,10 +381,10 @@ extern int ip_options_rcv_srr(struct sk_buff *skb); extern void ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb); extern int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc); -extern int ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, int optlen); +extern int ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, unsigned int optlen); extern int ip_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int compat_ip_setsockopt(struct sock *sk, int level, - int optname, char __user *optval, int optlen); + int optname, char __user *optval, unsigned int optlen); extern int compat_ip_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *)); diff --git a/include/net/ipip.h b/include/net/ipip.h index 76e3ea6e2fe..87acf8f3a15 100644 --- a/include/net/ipip.h +++ b/include/net/ipip.h @@ -27,18 +27,11 @@ struct ip_tunnel unsigned int prl_count; /* # of entries in PRL */ }; -/* ISATAP: default interval between RS in secondy */ -#define IPTUNNEL_RS_DEFAULT_DELAY (900) - struct ip_tunnel_prl_entry { struct ip_tunnel_prl_entry *next; __be32 addr; u16 flags; - unsigned long rs_delay; - struct timer_list rs_timer; - struct ip_tunnel *tunnel; - spinlock_t lock; }; #define IPTUNNEL_XMIT() do { \ diff --git a/include/net/ipv6.h b/include/net/ipv6.h index ad9a5113025..8c31d8a0c1f 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -550,7 +550,7 @@ extern int ipv6_find_tlv(struct sk_buff *skb, int offset, int type); extern int ipv6_setsockopt(struct sock *sk, int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); extern int ipv6_getsockopt(struct sock *sk, int level, int optname, char __user *optval, @@ -559,7 +559,7 @@ extern int compat_ipv6_setsockopt(struct sock *sk, int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); extern int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 42d00ced5eb..6e5f0e0c796 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -544,7 +544,7 @@ struct sctp_af { int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); int (*getsockopt) (struct sock *sk, int level, int optname, @@ -554,7 +554,7 @@ struct sctp_af { int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); int (*compat_getsockopt) (struct sock *sk, int level, int optname, diff --git a/include/net/sock.h b/include/net/sock.h index 950409dcec3..1621935aad5 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -624,7 +624,7 @@ struct proto { void (*shutdown)(struct sock *sk, int how); int (*setsockopt)(struct sock *sk, int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); int (*getsockopt)(struct sock *sk, int level, int optname, char __user *optval, int __user *option); @@ -632,7 +632,7 @@ struct proto { int (*compat_setsockopt)(struct sock *sk, int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); int (*compat_getsockopt)(struct sock *sk, int level, int optname, char __user *optval, @@ -951,7 +951,7 @@ extern void sock_rfree(struct sk_buff *skb); extern int sock_setsockopt(struct socket *sock, int level, int op, char __user *optval, - int optlen); + unsigned int optlen); extern int sock_getsockopt(struct socket *sock, int level, int op, char __user *optval, @@ -993,7 +993,7 @@ extern int sock_no_shutdown(struct socket *, int); extern int sock_no_getsockopt(struct socket *, int , int, char __user *, int __user *); extern int sock_no_setsockopt(struct socket *, int, int, - char __user *, int); + char __user *, unsigned int); extern int sock_no_sendmsg(struct kiocb *, struct socket *, struct msghdr *, size_t); extern int sock_no_recvmsg(struct kiocb *, struct socket *, @@ -1015,11 +1015,11 @@ extern int sock_common_getsockopt(struct socket *sock, int level, int optname, extern int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t size, int flags); extern int sock_common_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); extern int compat_sock_common_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen); extern int compat_sock_common_setsockopt(struct socket *sock, int level, - int optname, char __user *optval, int optlen); + int optname, char __user *optval, unsigned int optlen); extern void sk_common_release(struct sock *sk); diff --git a/include/net/tcp.h b/include/net/tcp.h index 56b76027b85..03a49c70337 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -394,13 +394,13 @@ extern int tcp_getsockopt(struct sock *sk, int level, int __user *optlen); extern int tcp_setsockopt(struct sock *sk, int level, int optname, char __user *optval, - int optlen); + unsigned int optlen); extern int compat_tcp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int compat_tcp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); extern void tcp_set_keepalive(struct sock *sk, int val); extern int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, diff --git a/include/net/udp.h b/include/net/udp.h index 5fb029f817a..f98abd2ce70 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -144,7 +144,7 @@ extern unsigned int udp_poll(struct file *file, struct socket *sock, extern int udp_lib_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int udp_lib_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen, + char __user *optval, unsigned int optlen, int (*push_pending_frames)(struct sock *)); extern struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport, diff --git a/include/net/wext.h b/include/net/wext.h index 6d76a39a9c5..3f2b94de2cf 100644 --- a/include/net/wext.h +++ b/include/net/wext.h @@ -14,6 +14,7 @@ extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cm void __user *arg); extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, unsigned long arg); +extern struct iw_statistics *get_wireless_stats(struct net_device *dev); #else static inline int wext_proc_init(struct net *net) { diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index 9a3b4986517..d696a692d94 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -279,7 +279,7 @@ extern struct pccard_resource_ops pccard_iodyn_ops; extern struct pccard_resource_ops pccard_nonstatic_ops; /* socket drivers are expected to use these callbacks in their .drv struct */ -extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state); +extern int pcmcia_socket_dev_suspend(struct device *dev); extern int pcmcia_socket_dev_resume(struct device *dev); /* socket drivers use this callback in their IRQ handler */ diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index c1bd8f1e8b9..d09550bf3f9 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -11,6 +11,7 @@ struct ext4_allocation_context; struct ext4_allocation_request; struct ext4_prealloc_space; struct ext4_inode_info; +struct mpage_da_data; #define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode)) @@ -236,6 +237,7 @@ TRACE_EVENT(ext4_da_writepages, __field( char, for_kupdate ) __field( char, for_reclaim ) __field( char, range_cyclic ) + __field( pgoff_t, writeback_index ) ), TP_fast_assign( @@ -249,15 +251,17 @@ TRACE_EVENT(ext4_da_writepages, __entry->for_kupdate = wbc->for_kupdate; __entry->for_reclaim = wbc->for_reclaim; __entry->range_cyclic = wbc->range_cyclic; + __entry->writeback_index = inode->i_mapping->writeback_index; ), - TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d", + TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d writeback_index %lu", jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino, __entry->nr_to_write, __entry->pages_skipped, __entry->range_start, __entry->range_end, __entry->nonblocking, __entry->for_kupdate, __entry->for_reclaim, - __entry->range_cyclic) + __entry->range_cyclic, + (unsigned long) __entry->writeback_index) ); TRACE_EVENT(ext4_da_write_pages, @@ -309,6 +313,7 @@ TRACE_EVENT(ext4_da_writepages_result, __field( char, encountered_congestion ) __field( char, more_io ) __field( char, no_nrwrite_index_update ) + __field( pgoff_t, writeback_index ) ), TP_fast_assign( @@ -320,14 +325,16 @@ TRACE_EVENT(ext4_da_writepages_result, __entry->encountered_congestion = wbc->encountered_congestion; __entry->more_io = wbc->more_io; __entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update; + __entry->writeback_index = inode->i_mapping->writeback_index; ), - TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d", + TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d writeback_index %lu", jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino, __entry->ret, __entry->pages_written, __entry->pages_skipped, __entry->encountered_congestion, __entry->more_io, - __entry->no_nrwrite_index_update) + __entry->no_nrwrite_index_update, + (unsigned long) __entry->writeback_index) ); TRACE_EVENT(ext4_da_write_begin, @@ -737,6 +744,169 @@ TRACE_EVENT(ext4_alloc_da_blocks, __entry->data_blocks, __entry->meta_blocks) ); +TRACE_EVENT(ext4_mballoc_alloc, + TP_PROTO(struct ext4_allocation_context *ac), + + TP_ARGS(ac), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( ino_t, ino ) + __field( __u16, found ) + __field( __u16, groups ) + __field( __u16, buddy ) + __field( __u16, flags ) + __field( __u16, tail ) + __field( __u8, cr ) + __field( __u32, orig_logical ) + __field( int, orig_start ) + __field( __u32, orig_group ) + __field( int, orig_len ) + __field( __u32, goal_logical ) + __field( int, goal_start ) + __field( __u32, goal_group ) + __field( int, goal_len ) + __field( __u32, result_logical ) + __field( int, result_start ) + __field( __u32, result_group ) + __field( int, result_len ) + ), + + TP_fast_assign( + __entry->dev = ac->ac_inode->i_sb->s_dev; + __entry->ino = ac->ac_inode->i_ino; + __entry->found = ac->ac_found; + __entry->flags = ac->ac_flags; + __entry->groups = ac->ac_groups_scanned; + __entry->buddy = ac->ac_buddy; + __entry->tail = ac->ac_tail; + __entry->cr = ac->ac_criteria; + __entry->orig_logical = ac->ac_o_ex.fe_logical; + __entry->orig_start = ac->ac_o_ex.fe_start; + __entry->orig_group = ac->ac_o_ex.fe_group; + __entry->orig_len = ac->ac_o_ex.fe_len; + __entry->goal_logical = ac->ac_g_ex.fe_logical; + __entry->goal_start = ac->ac_g_ex.fe_start; + __entry->goal_group = ac->ac_g_ex.fe_group; + __entry->goal_len = ac->ac_g_ex.fe_len; + __entry->result_logical = ac->ac_f_ex.fe_logical; + __entry->result_start = ac->ac_f_ex.fe_start; + __entry->result_group = ac->ac_f_ex.fe_group; + __entry->result_len = ac->ac_f_ex.fe_len; + ), + + TP_printk("dev %s inode %lu orig %u/%d/%u@%u goal %u/%d/%u@%u " + "result %u/%d/%u@%u blks %u grps %u cr %u flags 0x%04x " + "tail %u broken %u", + jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino, + __entry->orig_group, __entry->orig_start, + __entry->orig_len, __entry->orig_logical, + __entry->goal_group, __entry->goal_start, + __entry->goal_len, __entry->goal_logical, + __entry->result_group, __entry->result_start, + __entry->result_len, __entry->result_logical, + __entry->found, __entry->groups, __entry->cr, + __entry->flags, __entry->tail, + __entry->buddy ? 1 << __entry->buddy : 0) +); + +TRACE_EVENT(ext4_mballoc_prealloc, + TP_PROTO(struct ext4_allocation_context *ac), + + TP_ARGS(ac), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( ino_t, ino ) + __field( __u32, orig_logical ) + __field( int, orig_start ) + __field( __u32, orig_group ) + __field( int, orig_len ) + __field( __u32, result_logical ) + __field( int, result_start ) + __field( __u32, result_group ) + __field( int, result_len ) + ), + + TP_fast_assign( + __entry->dev = ac->ac_inode->i_sb->s_dev; + __entry->ino = ac->ac_inode->i_ino; + __entry->orig_logical = ac->ac_o_ex.fe_logical; + __entry->orig_start = ac->ac_o_ex.fe_start; + __entry->orig_group = ac->ac_o_ex.fe_group; + __entry->orig_len = ac->ac_o_ex.fe_len; + __entry->result_logical = ac->ac_b_ex.fe_logical; + __entry->result_start = ac->ac_b_ex.fe_start; + __entry->result_group = ac->ac_b_ex.fe_group; + __entry->result_len = ac->ac_b_ex.fe_len; + ), + + TP_printk("dev %s inode %lu orig %u/%d/%u@%u result %u/%d/%u@%u", + jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino, + __entry->orig_group, __entry->orig_start, + __entry->orig_len, __entry->orig_logical, + __entry->result_group, __entry->result_start, + __entry->result_len, __entry->result_logical) +); + +TRACE_EVENT(ext4_mballoc_discard, + TP_PROTO(struct ext4_allocation_context *ac), + + TP_ARGS(ac), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( ino_t, ino ) + __field( __u32, result_logical ) + __field( int, result_start ) + __field( __u32, result_group ) + __field( int, result_len ) + ), + + TP_fast_assign( + __entry->dev = ac->ac_inode->i_sb->s_dev; + __entry->ino = ac->ac_inode->i_ino; + __entry->result_logical = ac->ac_b_ex.fe_logical; + __entry->result_start = ac->ac_b_ex.fe_start; + __entry->result_group = ac->ac_b_ex.fe_group; + __entry->result_len = ac->ac_b_ex.fe_len; + ), + + TP_printk("dev %s inode %lu extent %u/%d/%u@%u ", + jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino, + __entry->result_group, __entry->result_start, + __entry->result_len, __entry->result_logical) +); + +TRACE_EVENT(ext4_mballoc_free, + TP_PROTO(struct ext4_allocation_context *ac), + + TP_ARGS(ac), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( ino_t, ino ) + __field( __u32, result_logical ) + __field( int, result_start ) + __field( __u32, result_group ) + __field( int, result_len ) + ), + + TP_fast_assign( + __entry->dev = ac->ac_inode->i_sb->s_dev; + __entry->ino = ac->ac_inode->i_ino; + __entry->result_logical = ac->ac_b_ex.fe_logical; + __entry->result_start = ac->ac_b_ex.fe_start; + __entry->result_group = ac->ac_b_ex.fe_group; + __entry->result_len = ac->ac_b_ex.fe_len; + ), + + TP_printk("dev %s inode %lu extent %u/%d/%u@%u ", + jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino, + __entry->result_group, __entry->result_start, + __entry->result_len, __entry->result_logical) +); + #endif /* _TRACE_EXT4_H */ /* This part must be outside protection */ diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h index b851f0b4701..3c60b75adb9 100644 --- a/include/trace/events/jbd2.h +++ b/include/trace/events/jbd2.h @@ -7,6 +7,9 @@ #include <linux/jbd2.h> #include <linux/tracepoint.h> +struct transaction_chp_stats_s; +struct transaction_run_stats_s; + TRACE_EVENT(jbd2_checkpoint, TP_PROTO(journal_t *journal, int result), @@ -162,6 +165,81 @@ TRACE_EVENT(jbd2_submit_inode_data, jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino) ); +TRACE_EVENT(jbd2_run_stats, + TP_PROTO(dev_t dev, unsigned long tid, + struct transaction_run_stats_s *stats), + + TP_ARGS(dev, tid, stats), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( unsigned long, tid ) + __field( unsigned long, wait ) + __field( unsigned long, running ) + __field( unsigned long, locked ) + __field( unsigned long, flushing ) + __field( unsigned long, logging ) + __field( __u32, handle_count ) + __field( __u32, blocks ) + __field( __u32, blocks_logged ) + ), + + TP_fast_assign( + __entry->dev = dev; + __entry->tid = tid; + __entry->wait = stats->rs_wait; + __entry->running = stats->rs_running; + __entry->locked = stats->rs_locked; + __entry->flushing = stats->rs_flushing; + __entry->logging = stats->rs_logging; + __entry->handle_count = stats->rs_handle_count; + __entry->blocks = stats->rs_blocks; + __entry->blocks_logged = stats->rs_blocks_logged; + ), + + TP_printk("dev %s tid %lu wait %u running %u locked %u flushing %u " + "logging %u handle_count %u blocks %u blocks_logged %u", + jbd2_dev_to_name(__entry->dev), __entry->tid, + jiffies_to_msecs(__entry->wait), + jiffies_to_msecs(__entry->running), + jiffies_to_msecs(__entry->locked), + jiffies_to_msecs(__entry->flushing), + jiffies_to_msecs(__entry->logging), + __entry->handle_count, __entry->blocks, + __entry->blocks_logged) +); + +TRACE_EVENT(jbd2_checkpoint_stats, + TP_PROTO(dev_t dev, unsigned long tid, + struct transaction_chp_stats_s *stats), + + TP_ARGS(dev, tid, stats), + + TP_STRUCT__entry( + __field( dev_t, dev ) + __field( unsigned long, tid ) + __field( unsigned long, chp_time ) + __field( __u32, forced_to_close ) + __field( __u32, written ) + __field( __u32, dropped ) + ), + + TP_fast_assign( + __entry->dev = dev; + __entry->tid = tid; + __entry->chp_time = stats->cs_chp_time; + __entry->forced_to_close= stats->cs_forced_to_close; + __entry->written = stats->cs_written; + __entry->dropped = stats->cs_dropped; + ), + + TP_printk("dev %s tid %lu chp_time %u forced_to_close %u " + "written %u dropped %u", + jbd2_dev_to_name(__entry->dev), __entry->tid, + jiffies_to_msecs(__entry->chp_time), + __entry->forced_to_close, __entry->written, __entry->dropped) +); + #endif /* _TRACE_JBD2_H */ /* This part must be outside protection */ diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 7ccba4bc5e3..ca83b73fba1 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -703,7 +703,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode); static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry); static int cgroup_populate_dir(struct cgroup *cgrp); static const struct inode_operations cgroup_dir_inode_operations; -static struct file_operations proc_cgroupstats_operations; +static const struct file_operations proc_cgroupstats_operations; static struct backing_dev_info cgroup_backing_dev_info = { .name = "cgroup", @@ -1863,7 +1863,7 @@ static int cgroup_seqfile_release(struct inode *inode, struct file *file) return single_release(inode, file); } -static struct file_operations cgroup_seqfile_operations = { +static const struct file_operations cgroup_seqfile_operations = { .read = seq_read, .write = cgroup_file_write, .llseek = seq_lseek, @@ -1922,7 +1922,7 @@ static int cgroup_rename(struct inode *old_dir, struct dentry *old_dentry, return simple_rename(old_dir, old_dentry, new_dir, new_dentry); } -static struct file_operations cgroup_file_operations = { +static const struct file_operations cgroup_file_operations = { .read = cgroup_file_read, .write = cgroup_file_write, .llseek = generic_file_llseek, @@ -3369,7 +3369,7 @@ static int cgroup_open(struct inode *inode, struct file *file) return single_open(file, proc_cgroup_show, pid); } -struct file_operations proc_cgroup_operations = { +const struct file_operations proc_cgroup_operations = { .open = cgroup_open, .read = seq_read, .llseek = seq_lseek, @@ -3398,7 +3398,7 @@ static int cgroupstats_open(struct inode *inode, struct file *file) return single_open(file, proc_cgroupstats_show, NULL); } -static struct file_operations proc_cgroupstats_operations = { +static const struct file_operations proc_cgroupstats_operations = { .open = cgroupstats_open, .read = seq_read, .llseek = seq_lseek, @@ -3708,8 +3708,10 @@ static void check_for_release(struct cgroup *cgrp) void __css_put(struct cgroup_subsys_state *css) { struct cgroup *cgrp = css->cgroup; + int val; rcu_read_lock(); - if (atomic_dec_return(&css->refcnt) == 1) { + val = atomic_dec_return(&css->refcnt); + if (val == 1) { if (notify_on_release(cgrp)) { set_bit(CGRP_RELEASABLE, &cgrp->flags); check_for_release(cgrp); @@ -3717,6 +3719,7 @@ void __css_put(struct cgroup_subsys_state *css) cgroup_wakeup_rmdir_waiter(cgrp); } rcu_read_unlock(); + WARN_ON_ONCE(val < 1); } /* diff --git a/kernel/kprobes.c b/kernel/kprobes.c index cfadc1291d0..5240d75f4c6 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1333,7 +1333,7 @@ static int __kprobes kprobes_open(struct inode *inode, struct file *filp) return seq_open(filp, &kprobes_seq_ops); } -static struct file_operations debugfs_kprobes_operations = { +static const struct file_operations debugfs_kprobes_operations = { .open = kprobes_open, .read = seq_read, .llseek = seq_lseek, @@ -1515,7 +1515,7 @@ static ssize_t write_enabled_file_bool(struct file *file, return count; } -static struct file_operations fops_kp = { +static const struct file_operations fops_kp = { .read = read_enabled_file_bool, .write = write_enabled_file_bool, }; diff --git a/kernel/module.c b/kernel/module.c index fe748a86d45..8b7d8805819 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1992,12 +1992,14 @@ static inline unsigned long layout_symtab(struct module *mod, Elf_Shdr *sechdrs, unsigned int symindex, unsigned int strindex, - const Elf_Hdr *hdr, + const Elf_Ehdr *hdr, const char *secstrings, unsigned long *pstroffs, unsigned long *strmap) { + return 0; } + static inline void add_kallsyms(struct module *mod, Elf_Shdr *sechdrs, unsigned int shnum, @@ -2081,9 +2083,8 @@ static noinline struct module *load_module(void __user *umod, struct module *mod; long err = 0; void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */ -#ifdef CONFIG_KALLSYMS unsigned long symoffs, stroffs, *strmap; -#endif + mm_segment_t old_fs; DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n", diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index c89f5e9fd17..179e6ad80dc 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -93,7 +93,7 @@ static int rcudata_open(struct inode *inode, struct file *file) return single_open(file, show_rcudata, NULL); } -static struct file_operations rcudata_fops = { +static const struct file_operations rcudata_fops = { .owner = THIS_MODULE, .open = rcudata_open, .read = seq_read, @@ -145,7 +145,7 @@ static int rcudata_csv_open(struct inode *inode, struct file *file) return single_open(file, show_rcudata_csv, NULL); } -static struct file_operations rcudata_csv_fops = { +static const struct file_operations rcudata_csv_fops = { .owner = THIS_MODULE, .open = rcudata_csv_open, .read = seq_read, @@ -196,7 +196,7 @@ static int rcuhier_open(struct inode *inode, struct file *file) return single_open(file, show_rcuhier, NULL); } -static struct file_operations rcuhier_fops = { +static const struct file_operations rcuhier_fops = { .owner = THIS_MODULE, .open = rcuhier_open, .read = seq_read, @@ -222,7 +222,7 @@ static int rcugp_open(struct inode *inode, struct file *file) return single_open(file, show_rcugp, NULL); } -static struct file_operations rcugp_fops = { +static const struct file_operations rcugp_fops = { .owner = THIS_MODULE, .open = rcugp_open, .read = seq_read, @@ -276,7 +276,7 @@ static int rcu_pending_open(struct inode *inode, struct file *file) return single_open(file, show_rcu_pending, NULL); } -static struct file_operations rcu_pending_fops = { +static const struct file_operations rcu_pending_fops = { .owner = THIS_MODULE, .open = rcu_pending_open, .read = seq_read, diff --git a/kernel/res_counter.c b/kernel/res_counter.c index 88faec23e83..bcdabf37c40 100644 --- a/kernel/res_counter.c +++ b/kernel/res_counter.c @@ -37,27 +37,17 @@ int res_counter_charge_locked(struct res_counter *counter, unsigned long val) } int res_counter_charge(struct res_counter *counter, unsigned long val, - struct res_counter **limit_fail_at, - struct res_counter **soft_limit_fail_at) + struct res_counter **limit_fail_at) { int ret; unsigned long flags; struct res_counter *c, *u; *limit_fail_at = NULL; - if (soft_limit_fail_at) - *soft_limit_fail_at = NULL; local_irq_save(flags); for (c = counter; c != NULL; c = c->parent) { spin_lock(&c->lock); ret = res_counter_charge_locked(c, val); - /* - * With soft limits, we return the highest ancestor - * that exceeds its soft limit - */ - if (soft_limit_fail_at && - !res_counter_soft_limit_check_locked(c)) - *soft_limit_fail_at = c; spin_unlock(&c->lock); if (ret < 0) { *limit_fail_at = c; @@ -85,8 +75,7 @@ void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val) counter->usage -= val; } -void res_counter_uncharge(struct res_counter *counter, unsigned long val, - bool *was_soft_limit_excess) +void res_counter_uncharge(struct res_counter *counter, unsigned long val) { unsigned long flags; struct res_counter *c; @@ -94,9 +83,6 @@ void res_counter_uncharge(struct res_counter *counter, unsigned long val, local_irq_save(flags); for (c = counter; c != NULL; c = c->parent) { spin_lock(&c->lock); - if (was_soft_limit_excess) - *was_soft_limit_excess = - !res_counter_soft_limit_check_locked(c); res_counter_uncharge_locked(c, val); spin_unlock(&c->lock); } diff --git a/kernel/sched.c b/kernel/sched.c index ee61f454a98..1535f3884b8 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -780,7 +780,7 @@ static int sched_feat_open(struct inode *inode, struct file *filp) return single_open(filp, sched_feat_show, NULL); } -static struct file_operations sched_feat_fops = { +static const struct file_operations sched_feat_fops = { .open = sched_feat_open, .write = sched_feat_write, .read = seq_read, diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index ac2e1dc708b..479ce5682d7 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -127,7 +127,7 @@ again: clock = wrap_max(clock, min_clock); clock = wrap_min(clock, max_clock); - if (cmpxchg(&scd->clock, old_clock, clock) != old_clock) + if (cmpxchg64(&scd->clock, old_clock, clock) != old_clock) goto again; return clock; @@ -163,7 +163,7 @@ again: val = remote_clock; } - if (cmpxchg(ptr, old_val, val) != old_val) + if (cmpxchg64(ptr, old_val, val) != old_val) goto again; return val; diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c index fddd69d16e0..1b5b7aa2fdf 100644 --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -275,7 +275,7 @@ static int timer_list_open(struct inode *inode, struct file *filp) return single_open(filp, timer_list_show, NULL); } -static struct file_operations timer_list_fops = { +static const struct file_operations timer_list_fops = { .open = timer_list_open, .read = seq_read, .llseek = seq_lseek, diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c index 4cde8b9c716..ee5681f8d7e 100644 --- a/kernel/time/timer_stats.c +++ b/kernel/time/timer_stats.c @@ -395,7 +395,7 @@ static int tstats_open(struct inode *inode, struct file *filp) return single_open(filp, tstats_show, NULL); } -static struct file_operations tstats_fops = { +static const struct file_operations tstats_fops = { .open = tstats_open, .read = seq_read, .write = tstats_write, diff --git a/lib/vsprintf.c b/lib/vsprintf.c index b91839e9e89..33bed5e67a2 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1771,7 +1771,7 @@ int vsscanf(const char * buf, const char * fmt, va_list args) * advance both strings to next white space */ if (*fmt == '*') { - while (!isspace(*fmt) && *fmt) + while (!isspace(*fmt) && *fmt != '%' && *fmt) fmt++; while (!isspace(*str) && *str) str++; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e2b98a6875c..f99f5991d6b 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -313,7 +313,8 @@ soft_limit_tree_from_page(struct page *page) static void __mem_cgroup_insert_exceeded(struct mem_cgroup *mem, struct mem_cgroup_per_zone *mz, - struct mem_cgroup_tree_per_zone *mctz) + struct mem_cgroup_tree_per_zone *mctz, + unsigned long long new_usage_in_excess) { struct rb_node **p = &mctz->rb_root.rb_node; struct rb_node *parent = NULL; @@ -322,7 +323,9 @@ __mem_cgroup_insert_exceeded(struct mem_cgroup *mem, if (mz->on_tree) return; - mz->usage_in_excess = res_counter_soft_limit_excess(&mem->res); + mz->usage_in_excess = new_usage_in_excess; + if (!mz->usage_in_excess) + return; while (*p) { parent = *p; mz_node = rb_entry(parent, struct mem_cgroup_per_zone, @@ -353,16 +356,6 @@ __mem_cgroup_remove_exceeded(struct mem_cgroup *mem, } static void -mem_cgroup_insert_exceeded(struct mem_cgroup *mem, - struct mem_cgroup_per_zone *mz, - struct mem_cgroup_tree_per_zone *mctz) -{ - spin_lock(&mctz->lock); - __mem_cgroup_insert_exceeded(mem, mz, mctz); - spin_unlock(&mctz->lock); -} - -static void mem_cgroup_remove_exceeded(struct mem_cgroup *mem, struct mem_cgroup_per_zone *mz, struct mem_cgroup_tree_per_zone *mctz) @@ -392,34 +385,36 @@ static bool mem_cgroup_soft_limit_check(struct mem_cgroup *mem) static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page) { - unsigned long long prev_usage_in_excess, new_usage_in_excess; - bool updated_tree = false; + unsigned long long excess; struct mem_cgroup_per_zone *mz; struct mem_cgroup_tree_per_zone *mctz; - - mz = mem_cgroup_zoneinfo(mem, page_to_nid(page), page_zonenum(page)); + int nid = page_to_nid(page); + int zid = page_zonenum(page); mctz = soft_limit_tree_from_page(page); /* - * We do updates in lazy mode, mem's are removed - * lazily from the per-zone, per-node rb tree + * Necessary to update all ancestors when hierarchy is used. + * because their event counter is not touched. */ - prev_usage_in_excess = mz->usage_in_excess; - - new_usage_in_excess = res_counter_soft_limit_excess(&mem->res); - if (prev_usage_in_excess) { - mem_cgroup_remove_exceeded(mem, mz, mctz); - updated_tree = true; - } - if (!new_usage_in_excess) - goto done; - mem_cgroup_insert_exceeded(mem, mz, mctz); - -done: - if (updated_tree) { - spin_lock(&mctz->lock); - mz->usage_in_excess = new_usage_in_excess; - spin_unlock(&mctz->lock); + for (; mem; mem = parent_mem_cgroup(mem)) { + mz = mem_cgroup_zoneinfo(mem, nid, zid); + excess = res_counter_soft_limit_excess(&mem->res); + /* + * We have to update the tree if mz is on RB-tree or + * mem is over its softlimit. + */ + if (excess || mz->on_tree) { + spin_lock(&mctz->lock); + /* if on-tree, remove it */ + if (mz->on_tree) + __mem_cgroup_remove_exceeded(mem, mz, mctz); + /* + * Insert again. mz->usage_in_excess will be updated. + * If excess is 0, no tree ops. + */ + __mem_cgroup_insert_exceeded(mem, mz, mctz, excess); + spin_unlock(&mctz->lock); + } } } @@ -447,9 +442,10 @@ static struct mem_cgroup_per_zone * __mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz) { struct rb_node *rightmost = NULL; - struct mem_cgroup_per_zone *mz = NULL; + struct mem_cgroup_per_zone *mz; retry: + mz = NULL; rightmost = rb_last(&mctz->rb_root); if (!rightmost) goto done; /* Nothing to reclaim from */ @@ -1270,9 +1266,9 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, gfp_t gfp_mask, struct mem_cgroup **memcg, bool oom, struct page *page) { - struct mem_cgroup *mem, *mem_over_limit, *mem_over_soft_limit; + struct mem_cgroup *mem, *mem_over_limit; int nr_retries = MEM_CGROUP_RECLAIM_RETRIES; - struct res_counter *fail_res, *soft_fail_res = NULL; + struct res_counter *fail_res; if (unlikely(test_thread_flag(TIF_MEMDIE))) { /* Don't account this! */ @@ -1304,17 +1300,16 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, if (mem_cgroup_is_root(mem)) goto done; - ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res, - &soft_fail_res); + ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res); if (likely(!ret)) { if (!do_swap_account) break; ret = res_counter_charge(&mem->memsw, PAGE_SIZE, - &fail_res, NULL); + &fail_res); if (likely(!ret)) break; /* mem+swap counter fails */ - res_counter_uncharge(&mem->res, PAGE_SIZE, NULL); + res_counter_uncharge(&mem->res, PAGE_SIZE); flags |= MEM_CGROUP_RECLAIM_NOSWAP; mem_over_limit = mem_cgroup_from_res_counter(fail_res, memsw); @@ -1353,16 +1348,11 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, } } /* - * Insert just the ancestor, we should trickle down to the correct - * cgroup for reclaim, since the other nodes will be below their - * soft limit + * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree. + * if they exceeds softlimit. */ - if (soft_fail_res) { - mem_over_soft_limit = - mem_cgroup_from_res_counter(soft_fail_res, res); - if (mem_cgroup_soft_limit_check(mem_over_soft_limit)) - mem_cgroup_update_tree(mem_over_soft_limit, page); - } + if (mem_cgroup_soft_limit_check(mem)) + mem_cgroup_update_tree(mem, page); done: return 0; nomem: @@ -1437,10 +1427,9 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *mem, if (unlikely(PageCgroupUsed(pc))) { unlock_page_cgroup(pc); if (!mem_cgroup_is_root(mem)) { - res_counter_uncharge(&mem->res, PAGE_SIZE, NULL); + res_counter_uncharge(&mem->res, PAGE_SIZE); if (do_swap_account) - res_counter_uncharge(&mem->memsw, PAGE_SIZE, - NULL); + res_counter_uncharge(&mem->memsw, PAGE_SIZE); } css_put(&mem->css); return; @@ -1519,7 +1508,7 @@ static int mem_cgroup_move_account(struct page_cgroup *pc, goto out; if (!mem_cgroup_is_root(from)) - res_counter_uncharge(&from->res, PAGE_SIZE, NULL); + res_counter_uncharge(&from->res, PAGE_SIZE); mem_cgroup_charge_statistics(from, pc, false); page = pc->page; @@ -1539,7 +1528,7 @@ static int mem_cgroup_move_account(struct page_cgroup *pc, } if (do_swap_account && !mem_cgroup_is_root(from)) - res_counter_uncharge(&from->memsw, PAGE_SIZE, NULL); + res_counter_uncharge(&from->memsw, PAGE_SIZE); css_put(&from->css); css_get(&to->css); @@ -1610,9 +1599,9 @@ uncharge: css_put(&parent->css); /* uncharge if move fails */ if (!mem_cgroup_is_root(parent)) { - res_counter_uncharge(&parent->res, PAGE_SIZE, NULL); + res_counter_uncharge(&parent->res, PAGE_SIZE); if (do_swap_account) - res_counter_uncharge(&parent->memsw, PAGE_SIZE, NULL); + res_counter_uncharge(&parent->memsw, PAGE_SIZE); } return ret; } @@ -1803,8 +1792,7 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr, * calling css_tryget */ if (!mem_cgroup_is_root(memcg)) - res_counter_uncharge(&memcg->memsw, PAGE_SIZE, - NULL); + res_counter_uncharge(&memcg->memsw, PAGE_SIZE); mem_cgroup_swap_statistics(memcg, false); mem_cgroup_put(memcg); } @@ -1831,9 +1819,9 @@ void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *mem) if (!mem) return; if (!mem_cgroup_is_root(mem)) { - res_counter_uncharge(&mem->res, PAGE_SIZE, NULL); + res_counter_uncharge(&mem->res, PAGE_SIZE); if (do_swap_account) - res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL); + res_counter_uncharge(&mem->memsw, PAGE_SIZE); } css_put(&mem->css); } @@ -1848,7 +1836,6 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype) struct page_cgroup *pc; struct mem_cgroup *mem = NULL; struct mem_cgroup_per_zone *mz; - bool soft_limit_excess = false; if (mem_cgroup_disabled()) return NULL; @@ -1888,10 +1875,10 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype) } if (!mem_cgroup_is_root(mem)) { - res_counter_uncharge(&mem->res, PAGE_SIZE, &soft_limit_excess); + res_counter_uncharge(&mem->res, PAGE_SIZE); if (do_swap_account && (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)) - res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL); + res_counter_uncharge(&mem->memsw, PAGE_SIZE); } if (ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT) mem_cgroup_swap_statistics(mem, true); @@ -1908,7 +1895,7 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype) mz = page_cgroup_zoneinfo(pc); unlock_page_cgroup(pc); - if (soft_limit_excess && mem_cgroup_soft_limit_check(mem)) + if (mem_cgroup_soft_limit_check(mem)) mem_cgroup_update_tree(mem, page); /* at swapout, this memcg will be accessed to record to swap */ if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT) @@ -1986,7 +1973,7 @@ void mem_cgroup_uncharge_swap(swp_entry_t ent) * This memcg can be obsolete one. We avoid calling css_tryget */ if (!mem_cgroup_is_root(memcg)) - res_counter_uncharge(&memcg->memsw, PAGE_SIZE, NULL); + res_counter_uncharge(&memcg->memsw, PAGE_SIZE); mem_cgroup_swap_statistics(memcg, false); mem_cgroup_put(memcg); } @@ -2233,6 +2220,7 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, unsigned long reclaimed; int loop = 0; struct mem_cgroup_tree_per_zone *mctz; + unsigned long long excess; if (order > 0) return 0; @@ -2284,9 +2272,8 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, break; } while (1); } - mz->usage_in_excess = - res_counter_soft_limit_excess(&mz->mem->res); __mem_cgroup_remove_exceeded(mz->mem, mz, mctz); + excess = res_counter_soft_limit_excess(&mz->mem->res); /* * One school of thought says that we should not add * back the node to the tree if reclaim returns 0. @@ -2295,8 +2282,8 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, * memory to reclaim from. Consider this as a longer * term TODO. */ - if (mz->usage_in_excess) - __mem_cgroup_insert_exceeded(mz->mem, mz, mctz); + /* If excess == 0, no tree ops */ + __mem_cgroup_insert_exceeded(mz->mem, mz, mctz, excess); spin_unlock(&mctz->lock); css_put(&mz->mem->css); loop++; diff --git a/mm/percpu.c b/mm/percpu.c index 43d8cacfdaa..4a048abad04 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1043,7 +1043,9 @@ static struct pcpu_chunk *alloc_pcpu_chunk(void) */ static void *pcpu_alloc(size_t size, size_t align, bool reserved) { + static int warn_limit = 10; struct pcpu_chunk *chunk; + const char *err; int slot, off; if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) { @@ -1059,11 +1061,14 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) if (reserved && pcpu_reserved_chunk) { chunk = pcpu_reserved_chunk; if (size > chunk->contig_hint || - pcpu_extend_area_map(chunk) < 0) + pcpu_extend_area_map(chunk) < 0) { + err = "failed to extend area map of reserved chunk"; goto fail_unlock; + } off = pcpu_alloc_area(chunk, size, align); if (off >= 0) goto area_found; + err = "alloc from reserved chunk failed"; goto fail_unlock; } @@ -1080,6 +1085,7 @@ restart: case 1: goto restart; /* pcpu_lock dropped, restart */ default: + err = "failed to extend area map"; goto fail_unlock; } @@ -1093,8 +1099,10 @@ restart: spin_unlock_irq(&pcpu_lock); chunk = alloc_pcpu_chunk(); - if (!chunk) + if (!chunk) { + err = "failed to allocate new chunk"; goto fail_unlock_mutex; + } spin_lock_irq(&pcpu_lock); pcpu_chunk_relocate(chunk, -1); @@ -1107,6 +1115,7 @@ area_found: if (pcpu_populate_chunk(chunk, off, size)) { spin_lock_irq(&pcpu_lock); pcpu_free_area(chunk, off); + err = "failed to populate"; goto fail_unlock; } @@ -1119,6 +1128,13 @@ fail_unlock: spin_unlock_irq(&pcpu_lock); fail_unlock_mutex: mutex_unlock(&pcpu_alloc_mutex); + if (warn_limit) { + pr_warning("PERCPU: allocation failed, size=%zu align=%zu, " + "%s\n", size, align, err); + dump_stack(); + if (!--warn_limit) + pr_info("PERCPU: limit reached, disable warning\n"); + } return NULL; } @@ -1347,6 +1363,10 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info( struct pcpu_alloc_info *ai; unsigned int *cpu_map; + /* this function may be called multiple times */ + memset(group_map, 0, sizeof(group_map)); + memset(group_cnt, 0, sizeof(group_map)); + /* * Determine min_unit_size, alloc_size and max_upa such that * alloc_size is multiple of atom_size and is the smallest @@ -1574,6 +1594,7 @@ static void pcpu_dump_alloc_info(const char *lvl, int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, void *base_addr) { + static char cpus_buf[4096] __initdata; static int smap[2], dmap[2]; size_t dyn_size = ai->dyn_size; size_t size_sum = ai->static_size + ai->reserved_size + dyn_size; @@ -1585,17 +1606,26 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, int *unit_map; int group, unit, i; + cpumask_scnprintf(cpus_buf, sizeof(cpus_buf), cpu_possible_mask); + +#define PCPU_SETUP_BUG_ON(cond) do { \ + if (unlikely(cond)) { \ + pr_emerg("PERCPU: failed to initialize, %s", #cond); \ + pr_emerg("PERCPU: cpu_possible_mask=%s\n", cpus_buf); \ + pcpu_dump_alloc_info(KERN_EMERG, ai); \ + BUG(); \ + } \ +} while (0) + /* sanity checks */ BUILD_BUG_ON(ARRAY_SIZE(smap) >= PCPU_DFL_MAP_ALLOC || ARRAY_SIZE(dmap) >= PCPU_DFL_MAP_ALLOC); - BUG_ON(ai->nr_groups <= 0); - BUG_ON(!ai->static_size); - BUG_ON(!base_addr); - BUG_ON(ai->unit_size < size_sum); - BUG_ON(ai->unit_size & ~PAGE_MASK); - BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE); - - pcpu_dump_alloc_info(KERN_DEBUG, ai); + PCPU_SETUP_BUG_ON(ai->nr_groups <= 0); + PCPU_SETUP_BUG_ON(!ai->static_size); + PCPU_SETUP_BUG_ON(!base_addr); + PCPU_SETUP_BUG_ON(ai->unit_size < size_sum); + PCPU_SETUP_BUG_ON(ai->unit_size & ~PAGE_MASK); + PCPU_SETUP_BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE); /* process group information and build config tables accordingly */ group_offsets = alloc_bootmem(ai->nr_groups * sizeof(group_offsets[0])); @@ -1604,7 +1634,7 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, unit_off = alloc_bootmem(nr_cpu_ids * sizeof(unit_off[0])); for (cpu = 0; cpu < nr_cpu_ids; cpu++) - unit_map[cpu] = NR_CPUS; + unit_map[cpu] = UINT_MAX; pcpu_first_unit_cpu = NR_CPUS; for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) { @@ -1618,8 +1648,9 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, if (cpu == NR_CPUS) continue; - BUG_ON(cpu > nr_cpu_ids || !cpu_possible(cpu)); - BUG_ON(unit_map[cpu] != NR_CPUS); + PCPU_SETUP_BUG_ON(cpu > nr_cpu_ids); + PCPU_SETUP_BUG_ON(!cpu_possible(cpu)); + PCPU_SETUP_BUG_ON(unit_map[cpu] != UINT_MAX); unit_map[cpu] = unit + i; unit_off[cpu] = gi->base_offset + i * ai->unit_size; @@ -1632,7 +1663,11 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, pcpu_nr_units = unit; for_each_possible_cpu(cpu) - BUG_ON(unit_map[cpu] == NR_CPUS); + PCPU_SETUP_BUG_ON(unit_map[cpu] == UINT_MAX); + + /* we're done parsing the input, undefine BUG macro and dump config */ +#undef PCPU_SETUP_BUG_ON + pcpu_dump_alloc_info(KERN_INFO, ai); pcpu_nr_groups = ai->nr_groups; pcpu_group_offsets = group_offsets; @@ -1782,7 +1817,7 @@ int __init pcpu_embed_first_chunk(size_t reserved_size, ssize_t dyn_size, void *base = (void *)ULONG_MAX; void **areas = NULL; struct pcpu_alloc_info *ai; - size_t size_sum, areas_size; + size_t size_sum, areas_size, max_distance; int group, i, rc; ai = pcpu_build_alloc_info(reserved_size, dyn_size, atom_size, @@ -1832,8 +1867,24 @@ int __init pcpu_embed_first_chunk(size_t reserved_size, ssize_t dyn_size, } /* base address is now known, determine group base offsets */ - for (group = 0; group < ai->nr_groups; group++) + max_distance = 0; + for (group = 0; group < ai->nr_groups; group++) { ai->groups[group].base_offset = areas[group] - base; + max_distance = max(max_distance, ai->groups[group].base_offset); + } + max_distance += ai->unit_size; + + /* warn if maximum distance is further than 75% of vmalloc space */ + if (max_distance > (VMALLOC_END - VMALLOC_START) * 3 / 4) { + pr_warning("PERCPU: max_distance=0x%lx too large for vmalloc " + "space 0x%lx\n", + max_distance, VMALLOC_END - VMALLOC_START); +#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK + /* and fail if we have fallback */ + rc = -EINVAL; + goto out_free; +#endif + } pr_info("PERCPU: Embedded %zu pages/cpu @%p s%zu r%zu d%zu u%zu\n", PFN_DOWN(size_sum), base, ai->static_size, ai->reserved_size, diff --git a/mm/rmap.c b/mm/rmap.c index 28aafe2b530..dd43373a483 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -242,8 +242,8 @@ vma_address(struct page *page, struct vm_area_struct *vma) } /* - * At what user virtual address is page expected in vma? checking that the - * page matches the vma: currently only used on anon pages, by unuse_vma; + * At what user virtual address is page expected in vma? + * checking that the page matches the vma. */ unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma) { diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c index 343146e1bce..a9150485019 100644 --- a/net/8021q/vlan_netlink.c +++ b/net/8021q/vlan_netlink.c @@ -169,6 +169,7 @@ static size_t vlan_get_size(const struct net_device *dev) struct vlan_dev_info *vlan = vlan_dev_info(dev); return nla_total_size(2) + /* IFLA_VLAN_ID */ + sizeof(struct ifla_vlan_flags) + /* IFLA_VLAN_FLAGS */ vlan_qos_map_size(vlan->nr_ingress_mappings) + vlan_qos_map_size(vlan->nr_egress_mappings); } diff --git a/net/atm/common.c b/net/atm/common.c index 8c4d843eb17..950bd16d238 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -679,7 +679,7 @@ static int check_qos(const struct atm_qos *qos) } int vcc_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct atm_vcc *vcc; unsigned long value; diff --git a/net/atm/common.h b/net/atm/common.h index 92e2981f479..f48a76b6cdf 100644 --- a/net/atm/common.h +++ b/net/atm/common.h @@ -21,7 +21,7 @@ unsigned int vcc_poll(struct file *file, struct socket *sock, poll_table *wait); int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); int vcc_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen); diff --git a/net/atm/pvc.c b/net/atm/pvc.c index e1d22d9430d..d4c024504f9 100644 --- a/net/atm/pvc.c +++ b/net/atm/pvc.c @@ -59,7 +59,7 @@ static int pvc_connect(struct socket *sock,struct sockaddr *sockaddr, } static int pvc_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; int error; diff --git a/net/atm/svc.c b/net/atm/svc.c index 7b831b526d0..f90d143c4b2 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -446,7 +446,7 @@ int svc_change_qos(struct atm_vcc *vcc,struct atm_qos *qos) static int svc_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct atm_vcc *vcc = ATM_SD(sock); diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index fbcac76fdc0..f4546073037 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -534,7 +534,7 @@ ax25_cb *ax25_create_cb(void) */ static int ax25_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; ax25_cb *ax25; @@ -641,15 +641,10 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname, case SO_BINDTODEVICE: if (optlen > IFNAMSIZ) - optlen=IFNAMSIZ; - if (copy_from_user(devname, optval, optlen)) { - res = -EFAULT; - break; - } + optlen = IFNAMSIZ; - dev = dev_get_by_name(&init_net, devname); - if (dev == NULL) { - res = -ENODEV; + if (copy_from_user(devname, optval, optlen)) { + res = -EFAULT; break; } @@ -657,12 +652,18 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname, (sock->state != SS_UNCONNECTED || sk->sk_state == TCP_LISTEN)) { res = -EADDRNOTAVAIL; - dev_put(dev); + break; + } + + dev = dev_get_by_name(&init_net, devname); + if (!dev) { + res = -ENODEV; break; } ax25->ax25_dev = ax25_dev_ax25dev(dev); ax25_fillin_cb(ax25, ax25->ax25_dev); + dev_put(dev); break; default: @@ -900,7 +901,6 @@ struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev) sock_init_data(NULL, sk); - sk->sk_destruct = ax25_free_sock; sk->sk_type = osk->sk_type; sk->sk_priority = osk->sk_priority; sk->sk_protocol = osk->sk_protocol; @@ -938,6 +938,7 @@ struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev) } sk->sk_protinfo = ax25; + sk->sk_destruct = ax25_free_sock; ax25->sk = sk; return sk; diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 4f9621f759a..75302a98606 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -466,7 +466,7 @@ drop: goto done; } -static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int len) +static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int len) { struct hci_ufilter uf = { .opcode = 0 }; struct sock *sk = sock->sk; diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index b0301256464..555d9da1869 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1698,7 +1698,7 @@ static int l2cap_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct ms return bt_sock_recvmsg(iocb, sock, msg, len, flags); } -static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, int optlen) +static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct l2cap_options opts; @@ -1755,7 +1755,7 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __us return err; } -static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen) +static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct bt_security sec; diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 0b85e811685..8a20aaf1f23 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -730,7 +730,7 @@ out: return copied ? : err; } -static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, int optlen) +static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; int err = 0; @@ -766,7 +766,7 @@ static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __u return err; } -static int rfcomm_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen) +static int rfcomm_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct bt_security sec; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 13c27f17192..77f4153bdb5 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -644,7 +644,7 @@ static int sco_sock_sendmsg(struct kiocb *iocb, struct socket *sock, return err; } -static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen) +static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; int err = 0; diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 142ebac1417..b1b3b0fbf41 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -432,6 +432,7 @@ err2: br_fdb_delete_by_port(br, p, 1); err1: kobject_put(&p->kobj); + p = NULL; /* kobject_put frees */ err0: dev_set_promiscuity(dev, -1); put_back: diff --git a/net/can/raw.c b/net/can/raw.c index db3152df7d2..b5e897922d3 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -411,7 +411,7 @@ static int raw_getname(struct socket *sock, struct sockaddr *uaddr, } static int raw_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct raw_sock *ro = raw_sk(sk); diff --git a/net/compat.c b/net/compat.c index 12728b17a22..a407c3addba 100644 --- a/net/compat.c +++ b/net/compat.c @@ -331,7 +331,7 @@ struct compat_sock_fprog { }; static int do_set_attach_filter(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct compat_sock_fprog __user *fprog32 = (struct compat_sock_fprog __user *)optval; struct sock_fprog __user *kfprog = compat_alloc_user_space(sizeof(struct sock_fprog)); @@ -351,7 +351,7 @@ static int do_set_attach_filter(struct socket *sock, int level, int optname, } static int do_set_sock_timeout(struct socket *sock, int level, - int optname, char __user *optval, int optlen) + int optname, char __user *optval, unsigned int optlen) { struct compat_timeval __user *up = (struct compat_timeval __user *) optval; struct timeval ktime; @@ -373,7 +373,7 @@ static int do_set_sock_timeout(struct socket *sock, int level, } static int compat_sock_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (optname == SO_ATTACH_FILTER) return do_set_attach_filter(sock, level, optname, @@ -385,7 +385,7 @@ static int compat_sock_setsockopt(struct socket *sock, int level, int optname, } asmlinkage long compat_sys_setsockopt(int fd, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { int err; struct socket *sock; @@ -558,8 +558,8 @@ struct compat_group_filter { int compat_mc_setsockopt(struct sock *sock, int level, int optname, - char __user *optval, int optlen, - int (*setsockopt)(struct sock *,int,int,char __user *,int)) + char __user *optval, unsigned int optlen, + int (*setsockopt)(struct sock *,int,int,char __user *,unsigned int)) { char __user *koptval = optval; int koptlen = optlen; diff --git a/net/core/dev.c b/net/core/dev.c index 560c8c9c03a..b8f74cfb1bf 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2288,6 +2288,9 @@ int netif_receive_skb(struct sk_buff *skb) int ret = NET_RX_DROP; __be16 type; + if (!skb->tstamp.tv64) + net_timestamp(skb); + if (skb->vlan_tci && vlan_hwaccel_do_receive(skb)) return NET_RX_SUCCESS; @@ -2295,9 +2298,6 @@ int netif_receive_skb(struct sk_buff *skb) if (netpoll_receive_skb(skb)) return NET_RX_DROP; - if (!skb->tstamp.tv64) - net_timestamp(skb); - if (!skb->iif) skb->iif = skb->dev->ifindex; diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 7d4c57523b0..821d30918cf 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -16,7 +16,7 @@ #include <net/sock.h> #include <linux/rtnetlink.h> #include <linux/wireless.h> -#include <net/iw_handler.h> +#include <net/wext.h> #include "net-sysfs.h" @@ -363,15 +363,13 @@ static ssize_t wireless_show(struct device *d, char *buf, char *)) { struct net_device *dev = to_net_dev(d); - const struct iw_statistics *iw = NULL; + const struct iw_statistics *iw; ssize_t ret = -EINVAL; read_lock(&dev_base_lock); if (dev_isalive(dev)) { - if (dev->wireless_handlers && - dev->wireless_handlers->get_wireless_stats) - iw = dev->wireless_handlers->get_wireless_stats(dev); - if (iw != NULL) + iw = get_wireless_stats(dev); + if (iw) ret = (*format)(iw, buf); } read_unlock(&dev_base_lock); @@ -505,7 +503,7 @@ int netdev_register_kobject(struct net_device *net) *groups++ = &netstat_group; #ifdef CONFIG_WIRELESS_EXT_SYSFS - if (net->wireless_handlers && net->wireless_handlers->get_wireless_stats) + if (net->wireless_handlers || net->ieee80211_ptr) *groups++ = &wireless_group; #endif #endif /* CONFIG_SYSFS */ diff --git a/net/core/sock.c b/net/core/sock.c index 524712a7b15..7626b6aacd6 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -446,7 +446,7 @@ static inline void sock_valbool_flag(struct sock *sk, int bit, int valbool) */ int sock_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; int val; @@ -1228,17 +1228,22 @@ void __init sk_init(void) void sock_wfree(struct sk_buff *skb) { struct sock *sk = skb->sk; - int res; + unsigned int len = skb->truesize; - /* In case it might be waiting for more memory. */ - res = atomic_sub_return(skb->truesize, &sk->sk_wmem_alloc); - if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE)) + if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE)) { + /* + * Keep a reference on sk_wmem_alloc, this will be released + * after sk_write_space() call + */ + atomic_sub(len - 1, &sk->sk_wmem_alloc); sk->sk_write_space(sk); + len = 1; + } /* - * if sk_wmem_alloc reached 0, we are last user and should - * free this sock, as sk_free() call could not do it. + * if sk_wmem_alloc reaches 0, we must finish what sk_free() + * could not do because of in-flight packets */ - if (res == 0) + if (atomic_sub_and_test(len, &sk->sk_wmem_alloc)) __sk_free(sk); } EXPORT_SYMBOL(sock_wfree); @@ -1697,7 +1702,7 @@ int sock_no_shutdown(struct socket *sock, int how) EXPORT_SYMBOL(sock_no_shutdown); int sock_no_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { return -EOPNOTSUPP; } @@ -2018,7 +2023,7 @@ EXPORT_SYMBOL(sock_common_recvmsg); * Set socket options on an inet socket. */ int sock_common_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; @@ -2028,7 +2033,7 @@ EXPORT_SYMBOL(sock_common_setsockopt); #ifdef CONFIG_COMPAT int compat_sock_common_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c index e0879bfb7dd..ac1205df6c8 100644 --- a/net/dcb/dcbnl.c +++ b/net/dcb/dcbnl.c @@ -194,7 +194,7 @@ static int dcbnl_reply(u8 value, u8 event, u8 cmd, u8 attr, u32 pid, nlmsg_end(dcbnl_skb, nlh); ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) - goto err; + return -EINVAL; return 0; nlmsg_failure: @@ -275,7 +275,7 @@ static int dcbnl_getpfccfg(struct net_device *netdev, struct nlattr **tb, ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) - goto err; + goto err_out; return 0; nlmsg_failure: @@ -316,12 +316,11 @@ static int dcbnl_getperm_hwaddr(struct net_device *netdev, struct nlattr **tb, ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) - goto err; + goto err_out; return 0; nlmsg_failure: -err: kfree_skb(dcbnl_skb); err_out: return -EINVAL; @@ -383,7 +382,7 @@ static int dcbnl_getcap(struct net_device *netdev, struct nlattr **tb, ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) - goto err; + goto err_out; return 0; nlmsg_failure: @@ -460,7 +459,7 @@ static int dcbnl_getnumtcs(struct net_device *netdev, struct nlattr **tb, ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) { ret = -EINVAL; - goto err; + goto err_out; } return 0; @@ -799,7 +798,7 @@ static int __dcbnl_pg_getcfg(struct net_device *netdev, struct nlattr **tb, ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) - goto err; + goto err_out; return 0; @@ -1063,7 +1062,7 @@ static int dcbnl_bcn_getcfg(struct net_device *netdev, struct nlattr **tb, ret = rtnl_unicast(dcbnl_skb, &init_net, pid); if (ret) - goto err; + goto err_out; return 0; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index d6bc47363b1..5ef32c2f0d6 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -290,14 +290,14 @@ extern int dccp_disconnect(struct sock *sk, int flags); extern int dccp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int dccp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); #ifdef CONFIG_COMPAT extern int compat_dccp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int compat_dccp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); #endif extern int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg); extern int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, diff --git a/net/dccp/proto.c b/net/dccp/proto.c index bc4467082a0..a156319fd0a 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -393,7 +393,7 @@ out: EXPORT_SYMBOL_GPL(dccp_ioctl); static int dccp_setsockopt_service(struct sock *sk, const __be32 service, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct dccp_sock *dp = dccp_sk(sk); struct dccp_service_list *sl = NULL; @@ -464,7 +464,7 @@ static int dccp_setsockopt_cscov(struct sock *sk, int cscov, bool rx) } static int dccp_setsockopt_ccid(struct sock *sk, int type, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { u8 *val; int rc = 0; @@ -494,7 +494,7 @@ static int dccp_setsockopt_ccid(struct sock *sk, int type, } static int do_dccp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct dccp_sock *dp = dccp_sk(sk); int val, err = 0; @@ -546,7 +546,7 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname, } int dccp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level != SOL_DCCP) return inet_csk(sk)->icsk_af_ops->setsockopt(sk, level, @@ -559,7 +559,7 @@ EXPORT_SYMBOL_GPL(dccp_setsockopt); #ifdef CONFIG_COMPAT int compat_dccp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level != SOL_DCCP) return inet_csk_compat_setsockopt(sk, level, optname, diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 77d40289653..7a58c87baf1 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -157,7 +157,7 @@ static struct hlist_head dn_sk_hash[DN_SK_HASH_SIZE]; static struct hlist_head dn_wild_sk; static atomic_t decnet_memory_allocated; -static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen, int flags); +static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen, int flags); static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags); static struct hlist_head *dn_find_list(struct sock *sk) @@ -1325,7 +1325,7 @@ out: return err; } -static int dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen) +static int dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; int err; @@ -1337,7 +1337,7 @@ static int dn_setsockopt(struct socket *sock, int level, int optname, char __use return err; } -static int __dn_setsockopt(struct socket *sock, int level,int optname, char __user *optval, int optlen, int flags) +static int __dn_setsockopt(struct socket *sock, int level,int optname, char __user *optval, unsigned int optlen, int flags) { struct sock *sk = sock->sk; struct dn_scp *scp = DN_SK(sk); diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c index 51593a48f2d..a413b1bf446 100644 --- a/net/ieee802154/dgram.c +++ b/net/ieee802154/dgram.c @@ -414,7 +414,7 @@ static int dgram_getsockopt(struct sock *sk, int level, int optname, } static int dgram_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct dgram_sock *ro = dgram_sk(sk); int val; diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c index 13198859982..30e74eee07d 100644 --- a/net/ieee802154/raw.c +++ b/net/ieee802154/raw.c @@ -244,7 +244,7 @@ static int raw_getsockopt(struct sock *sk, int level, int optname, } static int raw_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { return -EOPNOTSUPP; } diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 22cd19ee44e..4351ca2cf0b 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -714,7 +714,7 @@ int inet_csk_compat_getsockopt(struct sock *sk, int level, int optname, EXPORT_SYMBOL_GPL(inet_csk_compat_getsockopt); int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { const struct inet_connection_sock *icsk = inet_csk(sk); diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 5a0693576e8..0c0b6e363a2 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -440,7 +440,7 @@ out: */ static int do_ip_setsockopt(struct sock *sk, int level, - int optname, char __user *optval, int optlen) + int optname, char __user *optval, unsigned int optlen) { struct inet_sock *inet = inet_sk(sk); int val = 0, err; @@ -950,7 +950,7 @@ e_inval: } int ip_setsockopt(struct sock *sk, int level, - int optname, char __user *optval, int optlen) + int optname, char __user *optval, unsigned int optlen) { int err; @@ -975,7 +975,7 @@ EXPORT_SYMBOL(ip_setsockopt); #ifdef CONFIG_COMPAT int compat_ip_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { int err; diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index c43ec2d51ce..630a56df7b4 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -931,7 +931,7 @@ static void mrtsock_destruct(struct sock *sk) * MOSPF/PIM router set up we can clean this up. */ -int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int optlen) +int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen) { int ret; struct vifctl vif; diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index ebb1e5848bc..757c9171e7c 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -741,7 +741,7 @@ out: return ret; } static int do_raw_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (optname == ICMP_FILTER) { if (inet_sk(sk)->num != IPPROTO_ICMP) @@ -753,7 +753,7 @@ static int do_raw_setsockopt(struct sock *sk, int level, int optname, } static int raw_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level != SOL_RAW) return ip_setsockopt(sk, level, optname, optval, optlen); @@ -762,7 +762,7 @@ static int raw_setsockopt(struct sock *sk, int level, int optname, #ifdef CONFIG_COMPAT static int compat_raw_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level != SOL_RAW) return compat_ip_setsockopt(sk, level, optname, optval, optlen); diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 21387ebabf0..5a15e7629d8 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2032,7 +2032,7 @@ int tcp_disconnect(struct sock *sk, int flags) * Socket option code for TCP. */ static int do_tcp_setsockopt(struct sock *sk, int level, - int optname, char __user *optval, int optlen) + int optname, char __user *optval, unsigned int optlen) { struct tcp_sock *tp = tcp_sk(sk); struct inet_connection_sock *icsk = inet_csk(sk); @@ -2220,7 +2220,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level, } int tcp_setsockopt(struct sock *sk, int level, int optname, char __user *optval, - int optlen) + unsigned int optlen) { struct inet_connection_sock *icsk = inet_csk(sk); @@ -2232,7 +2232,7 @@ int tcp_setsockopt(struct sock *sk, int level, int optname, char __user *optval, #ifdef CONFIG_COMPAT int compat_tcp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level != SOL_TCP) return inet_csk_compat_setsockopt(sk, level, optname, diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ebaaa7f973d..3326aff6590 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1359,7 +1359,7 @@ void udp_destroy_sock(struct sock *sk) * Socket option code for UDP */ int udp_lib_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen, + char __user *optval, unsigned int optlen, int (*push_pending_frames)(struct sock *)) { struct udp_sock *up = udp_sk(sk); @@ -1441,7 +1441,7 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname, EXPORT_SYMBOL(udp_lib_setsockopt); int udp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level == SOL_UDP || level == SOL_UDPLITE) return udp_lib_setsockopt(sk, level, optname, optval, optlen, @@ -1451,7 +1451,7 @@ int udp_setsockopt(struct sock *sk, int level, int optname, #ifdef CONFIG_COMPAT int compat_udp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level == SOL_UDP || level == SOL_UDPLITE) return udp_lib_setsockopt(sk, level, optname, optval, optlen, diff --git a/net/ipv4/udp_impl.h b/net/ipv4/udp_impl.h index 9f4a6165f72..aaad650d47d 100644 --- a/net/ipv4/udp_impl.h +++ b/net/ipv4/udp_impl.h @@ -11,13 +11,13 @@ extern void __udp4_lib_err(struct sk_buff *, u32, struct udp_table *); extern int udp_v4_get_port(struct sock *sk, unsigned short snum); extern int udp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); extern int udp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); #ifdef CONFIG_COMPAT extern int compat_udp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); extern int compat_udp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); #endif diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 090675e269e..716153941fc 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1281,7 +1281,7 @@ int ip6mr_sk_done(struct sock *sk) * MOSPF/PIM router set up we can clean this up. */ -int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int optlen) +int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen) { int ret; struct mif6ctl vif; diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index f5e0682b402..14f54eb5a7f 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -123,7 +123,7 @@ struct ipv6_txoptions *ipv6_update_options(struct sock *sk, } static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct ipv6_pinfo *np = inet6_sk(sk); struct net *net = sock_net(sk); @@ -773,7 +773,7 @@ e_inval: } int ipv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { int err; @@ -801,7 +801,7 @@ EXPORT_SYMBOL(ipv6_setsockopt); #ifdef CONFIG_COMPAT int compat_ipv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { int err; diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 498b9b0b0fa..f74e4e2cdd0 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -658,7 +658,6 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr, &icmp6h, NULL, send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0); } -EXPORT_SYMBOL(ndisc_send_rs); static void ndisc_error_report(struct neighbour *neigh, struct sk_buff *skb) diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 7d675b8d82d..4f24570b086 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -957,7 +957,7 @@ static int rawv6_geticmpfilter(struct sock *sk, int level, int optname, static int do_rawv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct raw6_sock *rp = raw6_sk(sk); int val; @@ -1000,7 +1000,7 @@ static int do_rawv6_setsockopt(struct sock *sk, int level, int optname, } static int rawv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { switch(level) { case SOL_RAW: @@ -1024,7 +1024,7 @@ static int rawv6_setsockopt(struct sock *sk, int level, int optname, #ifdef CONFIG_COMPAT static int compat_rawv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { switch (level) { case SOL_RAW: diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index fcb53962884..dbd19a78ca7 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -15,7 +15,6 @@ * Roger Venning <r.venning@telstra.com>: 6to4 support * Nate Thompson <nate@thebog.net>: 6to4 support * Fred Templin <fred.l.templin@boeing.com>: isatap support - * Sascha Hlusiak <mail@saschahlusiak.de>: stateless autoconf for isatap */ #include <linux/module.h> @@ -223,44 +222,6 @@ failed: return NULL; } -static void ipip6_tunnel_rs_timer(unsigned long data) -{ - struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *) data; - struct inet6_dev *ifp; - struct inet6_ifaddr *addr; - - spin_lock(&p->lock); - ifp = __in6_dev_get(p->tunnel->dev); - - read_lock_bh(&ifp->lock); - for (addr = ifp->addr_list; addr; addr = addr->if_next) { - struct in6_addr rtr; - - if (!(ipv6_addr_type(&addr->addr) & IPV6_ADDR_LINKLOCAL)) - continue; - - /* Send RS to guessed linklocal address of router - * - * Better: send to ff02::2 encapsuled in unicast directly - * to router-v4 instead of guessing the v6 address. - * - * Cisco/Windows seem to not set the u/l bit correctly, - * so we won't guess right. - */ - ipv6_addr_set(&rtr, htonl(0xFE800000), 0, 0, 0); - if (!__ipv6_isatap_ifid(rtr.s6_addr + 8, - p->addr)) { - ndisc_send_rs(p->tunnel->dev, &addr->addr, &rtr); - } - } - read_unlock_bh(&ifp->lock); - - mod_timer(&p->rs_timer, jiffies + HZ * p->rs_delay); - spin_unlock(&p->lock); - - return; -} - static struct ip_tunnel_prl_entry * __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr) { @@ -313,13 +274,12 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t, c = 0; for (prl = t->prl; prl; prl = prl->next) { - if (c > cmax) + if (c >= cmax) break; if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr) continue; kp[c].addr = prl->addr; kp[c].flags = prl->flags; - kp[c].rs_delay = prl->rs_delay; c++; if (kprl.addr != htonl(INADDR_ANY)) break; @@ -369,23 +329,11 @@ ipip6_tunnel_add_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a, int chg) } p->next = t->prl; - p->tunnel = t; t->prl = p; t->prl_count++; - - spin_lock_init(&p->lock); - setup_timer(&p->rs_timer, ipip6_tunnel_rs_timer, (unsigned long) p); update: p->addr = a->addr; p->flags = a->flags; - p->rs_delay = a->rs_delay; - if (p->rs_delay == 0) - p->rs_delay = IPTUNNEL_RS_DEFAULT_DELAY; - spin_lock(&p->lock); - del_timer(&p->rs_timer); - if (p->flags & PRL_DEFAULT) - mod_timer(&p->rs_timer, jiffies + 1); - spin_unlock(&p->lock); out: write_unlock(&ipip6_lock); return err; @@ -404,9 +352,6 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a) if ((*p)->addr == a->addr) { x = *p; *p = x->next; - spin_lock(&x->lock); - del_timer(&x->rs_timer); - spin_unlock(&x->lock); kfree(x); t->prl_count--; goto out; @@ -417,9 +362,6 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a) while (t->prl) { x = t->prl; t->prl = t->prl->next; - spin_lock(&x->lock); - del_timer(&x->rs_timer); - spin_unlock(&x->lock); kfree(x); t->prl_count--; } diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index b265b7047d3..3a60f12b34e 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1044,7 +1044,7 @@ void udpv6_destroy_sock(struct sock *sk) * Socket option code for UDP */ int udpv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level == SOL_UDP || level == SOL_UDPLITE) return udp_lib_setsockopt(sk, level, optname, optval, optlen, @@ -1054,7 +1054,7 @@ int udpv6_setsockopt(struct sock *sk, int level, int optname, #ifdef CONFIG_COMPAT int compat_udpv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { if (level == SOL_UDP || level == SOL_UDPLITE) return udp_lib_setsockopt(sk, level, optname, optval, optlen, diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h index 6bb303471e2..d7571046bfc 100644 --- a/net/ipv6/udp_impl.h +++ b/net/ipv6/udp_impl.h @@ -16,10 +16,10 @@ extern int udp_v6_get_port(struct sock *sk, unsigned short snum); extern int udpv6_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); extern int udpv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); #ifdef CONFIG_COMPAT extern int compat_udpv6_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen); + char __user *optval, unsigned int optlen); extern int compat_udpv6_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); #endif diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c index f1118d92a19..66c7a20011f 100644 --- a/net/ipx/af_ipx.c +++ b/net/ipx/af_ipx.c @@ -1292,7 +1292,7 @@ const char *ipx_device_name(struct ipx_interface *intrfc) * socket object. */ static int ipx_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; int opt; diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index 50b43c57d5d..dd35641835f 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -1826,7 +1826,7 @@ static int irda_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned lon * */ static int irda_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct irda_sock *self = irda_sk(sk); diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index d985d163dcf..bada1b9c670 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1387,7 +1387,7 @@ static int iucv_sock_release(struct socket *sock) /* getsockopt and setsockopt */ static int iucv_sock_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct iucv_sock *iucv = iucv_sk(sk); diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index c45eee1c0e8..7aa4fd17010 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -973,7 +973,7 @@ static int llc_ui_ioctl(struct socket *sock, unsigned int cmd, * Set various connection specific parameters. */ static int llc_ui_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct llc_sock *llc = llc_sk(sk); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 97a278a2f48..8d26e9bf896 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1388,8 +1388,8 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); - printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n", - sdata->dev->name, reason_code); + printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n", + sdata->dev->name, mgmt->sa, reason_code); ieee80211_set_disassoc(sdata, false); return RX_MGMT_CFG80211_DISASSOC; @@ -1675,7 +1675,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, /* direct probe may be part of the association flow */ if (wk && wk->state == IEEE80211_MGD_STATE_PROBE) { - printk(KERN_DEBUG "%s direct probe responded\n", + printk(KERN_DEBUG "%s: direct probe responded\n", sdata->dev->name); wk->tries = 0; wk->state = IEEE80211_MGD_STATE_AUTH; @@ -2502,9 +2502,6 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgd_work *wk; const u8 *bssid = NULL; - printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n", - sdata->dev->name, req->reason_code); - mutex_lock(&ifmgd->mtx); if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) { @@ -2532,6 +2529,9 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, mutex_unlock(&ifmgd->mtx); + printk(KERN_DEBUG "%s: deauthenticating from %pM by local choice (reason=%d)\n", + sdata->dev->name, bssid, req->reason_code); + ieee80211_send_deauth_disassoc(sdata, bssid, IEEE80211_STYPE_DEAUTH, req->reason_code, cookie); @@ -2545,9 +2545,6 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n", - sdata->dev->name, req->reason_code); - mutex_lock(&ifmgd->mtx); /* @@ -2561,6 +2558,9 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, return -ENOLINK; } + printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n", + sdata->dev->name, req->bss->bssid, req->reason_code); + ieee80211_set_disassoc(sdata, false); mutex_unlock(&ifmgd->mtx); diff --git a/net/netfilter/nf_sockopt.c b/net/netfilter/nf_sockopt.c index 8ab829f8657..f042ae52155 100644 --- a/net/netfilter/nf_sockopt.c +++ b/net/netfilter/nf_sockopt.c @@ -113,7 +113,7 @@ static int nf_sockopt(struct sock *sk, u_int8_t pf, int val, } int nf_setsockopt(struct sock *sk, u_int8_t pf, int val, char __user *opt, - int len) + unsigned int len) { return nf_sockopt(sk, pf, val, opt, &len, 0); } @@ -154,7 +154,7 @@ static int compat_nf_sockopt(struct sock *sk, u_int8_t pf, int val, } int compat_nf_setsockopt(struct sock *sk, u_int8_t pf, - int val, char __user *opt, int len) + int val, char __user *opt, unsigned int len) { return compat_nf_sockopt(sk, pf, val, opt, &len, 0); } diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index a4bafbf1509..19e98007691 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1150,7 +1150,7 @@ static void netlink_update_socket_mc(struct netlink_sock *nlk, } static int netlink_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct netlink_sock *nlk = nlk_sk(sk); @@ -1788,7 +1788,7 @@ void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err) } rep = __nlmsg_put(skb, NETLINK_CB(in_skb).pid, nlh->nlmsg_seq, - NLMSG_ERROR, sizeof(struct nlmsgerr), 0); + NLMSG_ERROR, payload, 0); errmsg = nlmsg_data(rep); errmsg->error = err; memcpy(&errmsg->msg, nlh, err ? nlh->nlmsg_len : sizeof(*nlh)); diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index ce1a34b99c2..7a834952f67 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -301,7 +301,7 @@ void nr_destroy_socket(struct sock *sk) */ static int nr_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct nr_sock *nr = nr_sk(sk); diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 103d5611b81..d7ecca0a0c0 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1701,7 +1701,7 @@ static void packet_flush_mclist(struct sock *sk) } static int -packet_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen) +packet_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct packet_sock *po = pkt_sk(sk); diff --git a/net/phonet/pep.c b/net/phonet/pep.c index b8252d289cd..5f32d217535 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -742,7 +742,7 @@ static int pep_init(struct sock *sk) } static int pep_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct pep_sock *pn = pep_sk(sk); int val = 0, err = 0; diff --git a/net/phonet/socket.c b/net/phonet/socket.c index 07aa9f08d5f..aa5b5a972bf 100644 --- a/net/phonet/socket.c +++ b/net/phonet/socket.c @@ -407,7 +407,6 @@ int pn_sock_get_port(struct sock *sk, unsigned short sport) return -EADDRINUSE; found: - mutex_unlock(&port_mutex); pn->sobject = pn_object(pn_addr(pn->sobject), sport); return 0; } diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c index 6b58aeff4c7..98e05382fd3 100644 --- a/net/rds/af_rds.c +++ b/net/rds/af_rds.c @@ -248,7 +248,7 @@ static int rds_cong_monitor(struct rds_sock *rs, char __user *optval, } static int rds_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct rds_sock *rs = rds_sk_to_rs(sock->sk); int ret; diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 1e166c9685a..502cce76621 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -370,7 +370,7 @@ void rose_destroy_socket(struct sock *sk) */ static int rose_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; struct rose_sock *rose = rose_sk(sk); diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index bfe493ebf27..a86afceaa94 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -507,7 +507,7 @@ out: * set RxRPC socket options */ static int rxrpc_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct rxrpc_sock *rx = rxrpc_sk(sock->sk); unsigned min_sec_level; diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 89af37a6c87..c8d05758661 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2027,7 +2027,8 @@ out: * instead a error will be indicated to the user. */ static int sctp_setsockopt_disable_fragments(struct sock *sk, - char __user *optval, int optlen) + char __user *optval, + unsigned int optlen) { int val; @@ -2043,7 +2044,7 @@ static int sctp_setsockopt_disable_fragments(struct sock *sk, } static int sctp_setsockopt_events(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { if (optlen > sizeof(struct sctp_event_subscribe)) return -EINVAL; @@ -2064,7 +2065,7 @@ static int sctp_setsockopt_events(struct sock *sk, char __user *optval, * association is closed. */ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_sock *sp = sctp_sk(sk); @@ -2318,7 +2319,8 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params, } static int sctp_setsockopt_peer_addr_params(struct sock *sk, - char __user *optval, int optlen) + char __user *optval, + unsigned int optlen) { struct sctp_paddrparams params; struct sctp_transport *trans = NULL; @@ -2430,7 +2432,7 @@ static int sctp_setsockopt_peer_addr_params(struct sock *sk, */ static int sctp_setsockopt_delayed_ack(struct sock *sk, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { struct sctp_sack_info params; struct sctp_transport *trans = NULL; @@ -2546,7 +2548,7 @@ static int sctp_setsockopt_delayed_ack(struct sock *sk, * by the change). With TCP-style sockets, this option is inherited by * sockets derived from a listener socket. */ -static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, int optlen) +static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, unsigned int optlen) { struct sctp_initmsg sinit; struct sctp_sock *sp = sctp_sk(sk); @@ -2583,7 +2585,8 @@ static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, int opt * to this call if the caller is using the UDP model. */ static int sctp_setsockopt_default_send_param(struct sock *sk, - char __user *optval, int optlen) + char __user *optval, + unsigned int optlen) { struct sctp_sndrcvinfo info; struct sctp_association *asoc; @@ -2622,7 +2625,7 @@ static int sctp_setsockopt_default_send_param(struct sock *sk, * association peer's addresses. */ static int sctp_setsockopt_primary_addr(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_prim prim; struct sctp_transport *trans; @@ -2651,7 +2654,7 @@ static int sctp_setsockopt_primary_addr(struct sock *sk, char __user *optval, * integer boolean flag. */ static int sctp_setsockopt_nodelay(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { int val; @@ -2676,7 +2679,8 @@ static int sctp_setsockopt_nodelay(struct sock *sk, char __user *optval, * be changed. * */ -static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int optlen) { +static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, unsigned int optlen) +{ struct sctp_rtoinfo rtoinfo; struct sctp_association *asoc; @@ -2728,7 +2732,7 @@ static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int opt * See [SCTP] for more information. * */ -static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int optlen) +static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, unsigned int optlen) { struct sctp_assocparams assocparams; @@ -2800,7 +2804,7 @@ static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int o * addresses and a user will receive both PF_INET6 and PF_INET type * addresses on the socket. */ -static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, int optlen) +static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, unsigned int optlen) { int val; struct sctp_sock *sp = sctp_sk(sk); @@ -2844,7 +2848,7 @@ static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, int op * changed (effecting future associations only). * assoc_value: This parameter specifies the maximum size in bytes. */ -static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optlen) +static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, unsigned int optlen) { struct sctp_assoc_value params; struct sctp_association *asoc; @@ -2899,7 +2903,7 @@ static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optl * set primary request: */ static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_sock *sp; struct sctp_endpoint *ep; @@ -2950,7 +2954,7 @@ static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optva } static int sctp_setsockopt_adaptation_layer(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_setadaptation adaptation; @@ -2979,7 +2983,7 @@ static int sctp_setsockopt_adaptation_layer(struct sock *sk, char __user *optval * saved with outbound messages. */ static int sctp_setsockopt_context(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_assoc_value params; struct sctp_sock *sp; @@ -3030,7 +3034,7 @@ static int sctp_setsockopt_context(struct sock *sk, char __user *optval, */ static int sctp_setsockopt_fragment_interleave(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { int val; @@ -3063,7 +3067,7 @@ static int sctp_setsockopt_fragment_interleave(struct sock *sk, */ static int sctp_setsockopt_partial_delivery_point(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { u32 val; @@ -3096,7 +3100,7 @@ static int sctp_setsockopt_partial_delivery_point(struct sock *sk, */ static int sctp_setsockopt_maxburst(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_assoc_value params; struct sctp_sock *sp; @@ -3140,8 +3144,8 @@ static int sctp_setsockopt_maxburst(struct sock *sk, * will only effect future associations on the socket. */ static int sctp_setsockopt_auth_chunk(struct sock *sk, - char __user *optval, - int optlen) + char __user *optval, + unsigned int optlen) { struct sctp_authchunk val; @@ -3172,8 +3176,8 @@ static int sctp_setsockopt_auth_chunk(struct sock *sk, * endpoint requires the peer to use. */ static int sctp_setsockopt_hmac_ident(struct sock *sk, - char __user *optval, - int optlen) + char __user *optval, + unsigned int optlen) { struct sctp_hmacalgo *hmacs; u32 idents; @@ -3215,7 +3219,7 @@ out: */ static int sctp_setsockopt_auth_key(struct sock *sk, char __user *optval, - int optlen) + unsigned int optlen) { struct sctp_authkey *authkey; struct sctp_association *asoc; @@ -3260,8 +3264,8 @@ out: * the association shared key. */ static int sctp_setsockopt_active_key(struct sock *sk, - char __user *optval, - int optlen) + char __user *optval, + unsigned int optlen) { struct sctp_authkeyid val; struct sctp_association *asoc; @@ -3288,8 +3292,8 @@ static int sctp_setsockopt_active_key(struct sock *sk, * This set option will delete a shared secret key from use. */ static int sctp_setsockopt_del_key(struct sock *sk, - char __user *optval, - int optlen) + char __user *optval, + unsigned int optlen) { struct sctp_authkeyid val; struct sctp_association *asoc; @@ -3332,7 +3336,7 @@ static int sctp_setsockopt_del_key(struct sock *sk, * optlen - the size of the buffer. */ SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { int retval = 0; diff --git a/net/socket.c b/net/socket.c index 49917a1cac7..75655365b5f 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2098,12 +2098,17 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) unsigned long a[6]; unsigned long a0, a1; int err; + unsigned int len; if (call < 1 || call > SYS_ACCEPT4) return -EINVAL; + len = nargs[call]; + if (len > sizeof(a)) + return -EINVAL; + /* copy_from_user should be SMP safe. */ - if (copy_from_user(a, args, nargs[call])) + if (copy_from_user(a, args, len)) return -EFAULT; audit_socketcall(nargs[call] / sizeof(unsigned long), a); @@ -2386,7 +2391,7 @@ int kernel_getsockopt(struct socket *sock, int level, int optname, } int kernel_setsockopt(struct socket *sock, int level, int optname, - char *optval, int optlen) + char *optval, unsigned int optlen) { mm_segment_t oldfs = get_fs(); int err; diff --git a/net/tipc/socket.c b/net/tipc/socket.c index e8254e809b7..e6d9abf7440 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -1658,7 +1658,7 @@ restart: */ static int setsockopt(struct socket *sock, - int lvl, int opt, char __user *ov, int ol) + int lvl, int opt, char __user *ov, unsigned int ol) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 7fae7eee65d..93c3ed32920 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -762,9 +762,8 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev, wdev->conn->params.ssid = wdev->ssid; wdev->conn->params.ssid_len = connect->ssid_len; - /* don't care about result -- but fill bssid & channel */ - if (!wdev->conn->params.bssid || !wdev->conn->params.channel) - bss = cfg80211_get_conn_bss(wdev); + /* see if we have the bss already */ + bss = cfg80211_get_conn_bss(wdev); wdev->sme_state = CFG80211_SME_CONNECTING; wdev->connect_keys = connkeys; diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c index bf725275eb8..5615a880253 100644 --- a/net/wireless/wext-sme.c +++ b/net/wireless/wext-sme.c @@ -30,7 +30,8 @@ int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev, if (wdev->wext.keys) { wdev->wext.keys->def = wdev->wext.default_key; wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key; - wdev->wext.connect.privacy = true; + if (wdev->wext.default_key != -1) + wdev->wext.connect.privacy = true; } if (!wdev->wext.connect.ssid_len) @@ -229,8 +230,7 @@ int cfg80211_mgd_wext_giwessid(struct net_device *dev, data->flags = 1; data->length = wdev->wext.connect.ssid_len; memcpy(ssid, wdev->wext.connect.ssid, data->length); - } else - data->flags = 0; + } wdev_unlock(wdev); return 0; @@ -306,8 +306,6 @@ int cfg80211_mgd_wext_giwap(struct net_device *dev, wdev_lock(wdev); if (wdev->current_bss) memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN); - else if (wdev->wext.connect.bssid) - memcpy(ap_addr->sa_data, wdev->wext.connect.bssid, ETH_ALEN); else memset(ap_addr->sa_data, 0, ETH_ALEN); wdev_unlock(wdev); diff --git a/net/wireless/wext.c b/net/wireless/wext.c index 5b4a0cee441..60fe57761ca 100644 --- a/net/wireless/wext.c +++ b/net/wireless/wext.c @@ -470,7 +470,7 @@ static iw_handler get_handler(struct net_device *dev, unsigned int cmd) /* * Get statistics out of the driver */ -static struct iw_statistics *get_wireless_stats(struct net_device *dev) +struct iw_statistics *get_wireless_stats(struct net_device *dev) { /* New location */ if ((dev->wireless_handlers != NULL) && @@ -773,10 +773,13 @@ static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd, essid_compat = 1; else if (IW_IS_SET(cmd) && (iwp->length != 0)) { char essid[IW_ESSID_MAX_SIZE + 1]; + unsigned int len; + len = iwp->length * descr->token_size; - err = copy_from_user(essid, iwp->pointer, - iwp->length * - descr->token_size); + if (len > IW_ESSID_MAX_SIZE) + return -EFAULT; + + err = copy_from_user(essid, iwp->pointer, len); if (err) return -EFAULT; diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index 5e6c072c64d..7fa9c7ad3d3 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -409,7 +409,7 @@ static void x25_destroy_socket(struct sock *sk) */ static int x25_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, int optlen) + char __user *optval, unsigned int optlen) { int opt; struct sock *sk = sock->sk; diff --git a/samples/tracepoints/tracepoint-sample.c b/samples/tracepoints/tracepoint-sample.c index 9cf80a11e8b..26fab33ffa8 100644 --- a/samples/tracepoints/tracepoint-sample.c +++ b/samples/tracepoints/tracepoint-sample.c @@ -28,7 +28,7 @@ static int my_open(struct inode *inode, struct file *file) return -EPERM; } -static struct file_operations mark_ops = { +static const struct file_operations mark_ops = { .open = my_open, }; diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index 8e9777b7640..0c72c9c3895 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -43,7 +43,7 @@ static ssize_t ima_show_htable_violations(struct file *filp, return ima_show_htable_value(buf, count, ppos, &ima_htable.violations); } -static struct file_operations ima_htable_violations_ops = { +static const struct file_operations ima_htable_violations_ops = { .read = ima_show_htable_violations }; @@ -55,7 +55,7 @@ static ssize_t ima_show_measurements_count(struct file *filp, } -static struct file_operations ima_measurements_count_ops = { +static const struct file_operations ima_measurements_count_ops = { .read = ima_show_measurements_count }; @@ -158,7 +158,7 @@ static int ima_measurements_open(struct inode *inode, struct file *file) return seq_open(file, &ima_measurments_seqops); } -static struct file_operations ima_measurements_ops = { +static const struct file_operations ima_measurements_ops = { .open = ima_measurements_open, .read = seq_read, .llseek = seq_lseek, @@ -233,7 +233,7 @@ static int ima_ascii_measurements_open(struct inode *inode, struct file *file) return seq_open(file, &ima_ascii_measurements_seqops); } -static struct file_operations ima_ascii_measurements_ops = { +static const struct file_operations ima_ascii_measurements_ops = { .open = ima_ascii_measurements_open, .read = seq_read, .llseek = seq_lseek, @@ -313,7 +313,7 @@ static int ima_release_policy(struct inode *inode, struct file *file) return 0; } -static struct file_operations ima_measure_policy_ops = { +static const struct file_operations ima_measure_policy_ops = { .open = ima_open_policy, .write = ima_write_policy, .release = ima_release_policy diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index b5e7e3f1183..e79c54034bc 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2625,7 +2625,7 @@ static int vcpu_stat_get(void *_offset, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(vcpu_stat_fops, vcpu_stat_get, NULL, "%llu\n"); -static struct file_operations *stat_fops[] = { +static const struct file_operations *stat_fops[] = { [KVM_STAT_VCPU] = &vcpu_stat_fops, [KVM_STAT_VM] = &vm_stat_fops, }; |